dma-buf: DMABUF_MOVE_NOTIFY should depend on DMA_SHARED_BUFFER

Move notify between drivers is an option of DMA-BUF.  Enabling
DMABUF_MOVE_NOTIFY without DMA_SHARED_BUFFER does not have any impact,
as drivers/dma-buf/ is not entered during the build when
DMA_SHARED_BUFFER is disabled.

Fixes: bb42df4662a44765 ("dma-buf: add dynamic DMA-buf handling v15")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902124913.2698760-2-geert@linux-m68k.org

drm/ttm: Fix ttm_bo_move_memcpy() for subclassed struct ttm_resource

The code was making a copy of a struct ttm_resource. However,
recently the struct ttm_resources were allowed to be subclassed and
also were allowed to be malloced, hence the driver could end up assuming
the copy we handed it was subclassed and worse, the original could have
been freed at this point.

Fix this by using the original struct ttm_resource before it is
potentially freed in ttm_bo_move_sync_cleanup()

v2: Base on drm-misc-next-fixes rather than drm-tip.

Reported-by: Ben Skeggs <skeggsb@gmail.com>
Reported-by: Dave Airlie <airlied@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org>
Fixes: 3bf3710e3718 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831071536.80636-1-thomas.hellstrom@linux.intel.com

drm/panfrost: Clamp lock region to Bifrost minimum

When locking a region, we currently clamp to a PAGE_SIZE as the minimum
lock region. While this is valid for Midgard, it is invalid for Bifrost,
where the minimum locking size is 8x larger than the 4k page size. Add a
hardware definition for the minimum lock region size (corresponding to
KBASE_LOCK_REGION_MIN_SIZE_LOG2 in kbase) and respect it.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-4-alyssa.rosenzweig@collabora.com

drm/panfrost: Use u64 for size in lock_region

Mali virtual addresses are 48-bit. Use a u64 instead of size_t to ensure
we can express the "lock everything" condition as ~0ULL without
overflow. This code was silently broken on any platform where a size_t
is less than 48-bits; in particular, it was broken on 32-bit armv7
platforms which remain in use with panfrost. (Mainly RK3288)

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Suggested-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-3-alyssa.rosenzweig@collabora.com

drm/panfrost: Simplify lock_region calculation

In lock_region, simplify the calculation of the region_width parameter.
This field is the size, but encoded as ceil(log2(size)) - 1.
ceil(log2(size)) may be computed directly as fls(size - 1). However, we
want to use the 64-bit versions as the amount to lock can exceed
32-bits.

This avoids undefined (and completely wrong) behaviour when locking all
memory (size ~0). In this case, the old code would "round up" ~0 to the
nearest page, overflowing to 0. Since fls(0) == 0, this would calculate
a region width of 10 + 0 = 10. But then the code would shift by
(region_width - 11) = -1. As shifting by a negative number is undefined,
UBSAN flags the bug. Of course, even if it were defined the behaviour is
wrong, instead of locking all memory almost none would get locked.

The new form of the calculation corrects this special case and avoids
the undefined behaviour.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reported-and-tested-by: Chris Morgan <macromorgan@hotmail.com>
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-2-alyssa.rosenzweig@collabora.com

drm/mgag200: Fix uninitialized variable delta

The variable delta is not initialized and this will cause unexpected
behaviour with the comparison of tmpdelta < delta. Fix this by setting
it to 0xffffffff. This matches the behaviour as in the similar function
mgag200_pixpll_compute_g200se_04.

v2:
* move fix up by one line to align style with other functions
* add additional tags from similar patch

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Fixes: 2545ac960364 ("drm/mgag200: Abstract pixel PLL via struct mgag200_pll")
Addresses-Coverity: ("Uninitialized scalar variable")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210817163204.494166-1-colin.king@canonical.com

drm/vc4: hdmi: make vc4_hdmi_codec_pdata static

This symbol is not used outside of vc4_hdmi.c, so marks it static.

Fix the following sparse warning:

drivers/gpu/drm/vc4/vc4_hdmi.c:1479:25: warning: symbol
'vc4_hdmi_codec_pdata' was not declared. Should it be static?

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/1627640794-15718-1-git-send-email-jiapeng.chong@linux.alibaba.com

drm/ttm: Include pagemap.h from ttm_tt.h

It's needed for pgprot_t which is used in the header.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812203443.1725307-2-jason@jlekstrand.net
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/ttm: ttm_bo_device is now ttm_device

These names were changed in

commit 8af8a109b34fa88b8b91f25d11485b37d37549c3
Author: Christian König <christian.koenig@amd.com>
Date:   Thu Oct 1 14:51:40 2020 +0200

    drm/ttm: device naming cleanup

But he missed a couple of them.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Christian König <christian.koenig@amd.com>
Fixes: 8af8a109b34f ("drm/ttm: device naming cleanup")
Link: https://patchwork.freedesktop.org/patch/msgid/20210812203443.1725307-1-jason@jlekstrand.net
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

Merge tag 'drm-misc-next-2021-08-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.15:

UAPI Changes:

Cross-subsystem Changes:
- Add lockdep_assert(once) helpers.

Core Changes:
- Add lockdep assert to drm_is_current_master_locked.
- Fix typos in dma-buf documentation.
- Mark drm irq midlayer as legacy only.
- Fix GPF in udmabuf_create.
- Rename member to correct value in drm_edid.h

Driver Changes:
- Build fix to make nouveau build with NOUVEAU_BACKLIGHT.
- Add MI101AIT-ICP1, LTTD800480070-L6WWH-RT panels.
- Assorted fixes to bridge/it66121, anx7625.
- Add custom crtc_state to simple helpers, and use it to
  convert pll handling in mgag200 to atomic.
- Convert drivers to use offset-adjusted framebuffer bo mappings.
- Assorted small fixes and fix for a use-after-free in vmwgfx.
- Convert remaining callers of non-legacy drivers to use linux irqs directly.
- Small cleanup in ingenic.
- Small fixes to virtio and ti-sn65dsi86.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1cf2d7fc-402d-1852-574a-21cbbd2eaebf@linux.intel.com

drm/bridge: ti-sn65dsi86: Avoid creating multiple connectors

If we created our own connector because the driver does not support the
NO_CONNECTOR flag, we don't want the downstream bridge to *also* create
a connector.  And if this driver did pass the NO_CONNECTOR flag (and we
supported that mode) this would change nothing.

Fixes: 4e5763f03e10 ("drm/bridge: ti-sn65dsi86: Wrap panel with panel-bridge")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811235253.924867-2-robdclark@gmail.com

drm/edid: fix edid field name

Byte 26 in a edid struct is supposed to be "Blue and white
least-significant 2 bits", not "black and white". Rename the field
accordingly. This field is not used anywhere, so just renaming it here
for correctness.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811205818.156100-1-lucas.demarchi@intel.com

drm/virtio: set non-cross device blob uuid_state

Blob resources without the cross device flag don't have a uuid to share
with other virtio devices. When exporting such blobs, set uuid_state to
STATE_ERR so that virtgpu_virtio_get_uuid doesn't hang.

Signed-off-by: David Stevens <stevensd@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20210811040401.1264234-1-stevensd@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

udmabuf: fix general protection fault in udmabuf_create

Syzbot reported general protection fault in udmabuf_create. The problem
was in wrong error handling.

In commit 16c243e99d33 ("udmabuf: Add support for mapping hugepages (v4)")
shmem_read_mapping_page() call was replaced with find_get_page_flags(),
but find_get_page_flags() returns NULL on failure instead PTR_ERR().

Wrong error checking was causing GPF in get_page(), since passed page
was equal to NULL. Fix it by changing if (IS_ER(!hpage)) to if (!hpage)

Reported-by: syzbot+e9cd3122a37c5d6c51e8@syzkaller.appspotmail.com
Fixes: 16c243e99d33 ("udmabuf: Add support for mapping hugepages (v4)")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210811175052.21254-1-paskripkin@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Merge tag 'drm-intel-next-2021-08-10-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 changes for v5.15:

Features:
- Basic DG2 platform enabling (Matt, Animesh, Gwan-gyeong, José)
- Add PSF GV point support for display bandwidth calculation (Stan)
- Add platform release id version support (Lucas)
- Add support for forcing DSC BPP for testing (Vandita, Patnana)

Refactoring and cleanups:
- Remove CNL support completely (Lucas)
- Revid/stepping cleanup (Matt, Anusha)
- Make display stepping check upper bounds exclusive (Matt)
- Remove old GEN macros (Lucas)
- Refactor DG1 interrupt handler (Paulo)
- Refactor DMC stepping info (Anusha)

Fixes:
- Fix XELPD color capability reporting; it's not yet enabled (Uma)
- Fix DG1 memory bandwidth computation (Clint)
- Fix mux on certain HP laptops (Kai-Heng)
- Various display workarounds (José, Matt, Imre)
- Fix error state dumps wrt SFC_DONE (Matt)
- Fix DG1 and XEPLD audio power domains (Anshuman)
- Fix ADL-P and ADL-S ddi buf translation tables (Matt)
- Fix DP/HDMI modeset sequences causing issues on ADL-P (José)
- PSR2 fixes (José)
- Fix DP MST modeset with FEC on TGL+
- Fix MBUS DBOX A credits on ADL-P (José)
- Fix DP PHY test training set programming (Khaled)
- Fix dgfx pcode uncore init done wait (Badal)
- Fix DSC disable fuse check on GLK (Lucas)
- Fix shared dpll mismatch for bigjoiner secondary pipe (Manasi)
- Fix ADL-P underrun recovery (Matt)
- Fix permissions on FEC support debugfs file (Vandita)

Misc:
- Backmerge drm-next (Rodrigo)
- Bump RKL and TGL DMC firmware version (Anusha)

Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/i915_drv.h
# drivers/gpu/drm/i915/intel_device_info.h
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a6lpo1a9.fsf@intel.com

Merge tag 'drm-xilinx-dpsub-20210809' of git://linuxtv.org/pinchartl/media into drm-next

- Miscellaneous fixes in ZynqMP DPSUB driver

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YRCSRZZV1HZYPvaG@pendragon.ideasonboard.com

Merge tag 'drm-intel-gt-next-2021-08-06-1' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-next

UAPI Changes:

- Add I915_MMAP_OFFSET_FIXED

  On devices with local memory `I915_MMAP_OFFSET_FIXED` is the only valid
  type. On devices without local memory, this caching mode is invalid.

  As caching mode when specifying `I915_MMAP_OFFSET_FIXED`, WC or WB will
  be used, depending on the object placement on creation. WB will be used
  when the object can only exist in system memory, WC otherwise.

  Userspace: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11888

- Reinstate the mmap ioctl for (already released) integrated Gen12 platforms

  Rationale: Otherwise media driver breaks eg. for ADL-P. Long term goal is
  still to sunset the IOCTL even for integrated and require using mmap_offset.

- Reject caching/set_domain IOCTLs on discrete

  Expected to become immutable property of the BO

- Disallow changing context parameters after first use on Gen12 and earlier
- Require setting context parameters at creation on platforms after Gen12

  Rationale (for both): Allow less dynamic changes to the context to simplify
  the implementation and avoid user shooting theirselves in the foot.

- Drop I915_CONTEXT_PARAM_RINGSIZE

  Userspace PR for compute-driver has not been merged

- Drop I915_CONTEXT_PARAM_NO_ZEROMAP

  Userspace PR for libdrm / Beignet was never landed

- Drop CONTEXT_CLONE API

  Userspace PR for Mesa was never landed

- Drop getparam support for I915_CONTEXT_PARAM_ENGINES

  Only existed for symmetry wrt. setparam, never used.

- Disallow bonding of virtual engines

  Drop the prep work, no hardware has been released needing it.

- (Implicit) Disable gpu relocations

  Media userspace was the last userspace to still use them. They
  have converted so performance can be regained with an update.

Core Changes:

- Merge topic branch 'topic/i915-ttm-2021-06-11' (from Maarten)
- Merge topic branch 'topic/revid_steppings' (from Matt R)
- Merge topic branch 'topic/xehp-dg2-definitions-2021-07-21' (from Matt R)
- Backmerges drm-next (Rodrigo)

Driver Changes:

- Initial workarounds for ADL-P (Clint)
- Preliminary code for XeHP/DG2 (Stuart, Umesh, Matt R, Prathap, Ram,
  Venkata, Akeem, Tvrtko, John, Lucas)
- Fix ADL-S DMA mask size to 39 bits (Tejas)
- Remove code for CNL (Lucas)
- Add ADL-P GuC/HuC firmwares (John)
- Update HuC to 7.9.3 for TGL/ADL-S/RKL (John)
- Fix -EDEADLK handling regression (Ville)
- Implement Wa_1508744258 for DG1 and Gen12 iGFX (Jose)
- Extend Wa_1406941453 to ADL-S (Jose)
- Drop unnecessary workarounds per stepping for SKL/BXT/ICL (Matt R)
- Use fuse info to enable SFC on Gen12 (Venkata)
- Unconditionally flush the pages on acquire on EHL/JSL (Matt A)
- Probe existence of backing struct pages upon userptr creation (Chris, Matt A)

- Add an intermediate GEM proto-context to delay real context creation (Jason)
- Implement SINGLE_TIMELINE with a syncobj (Jason)
- Set the watchdog timeout directly in intel_context_set_gem (Jason)
- Disallow userspace from creating contexts with too many engines (Jason)
- Revert "drm/i915/gem: Asynchronous cmdparser" (Jason)
- Revert "drm/i915: Propagate errors on awaiting already signaled fences" (Jason)
- Revert "drm/i915: Skip over MI_NOOP when parsing" (Jason)
- Revert "drm/i915: Shrink the GEM kmem_caches upon idling" (Daniel)
- Always let TTM handle object migration (Jason)
- Correct the locking and pin pattern for dma-buf (Thomas H, Michael R, Jason)
- Migrate to system at dma-buf attach time (Thomas, Michael R)

- MAJOR refactoring of the GuC backend code to allow for enabling on Gen11+
  (Matt B, John, Michal Wa., Fernando, Daniele, Vinay)
- Update GuC firmware interface to v62.0.0 (John, Michal Wa., Matt B)
- Add GuCRC feature to hand over the control of HW RC6 to the GuC on
  Gen12+ when GuC submission is enabled (Vinay, Sujaritha, Daniele,
  John, Tvrtko)
- Use the correct IRQ during resume and eliminate DRM IRQ midlayer (Thomas Z)
- Add pipelined page migration and clearing (Chris, Thomas H)
- Use TTM for system memory on discrete (Thomas H)
- Implement object migration for display vs. dma-buf (Thomas H)
- Perform execbuffer object locking as a separate step (Thomas H)
- Add support for explicit L3BANK steering (Matt, Daniele)
- Remove duplicated call to ops->pread (Daniel)
- Fix pagefault disabling in the first execbuf slowpath (Daniel)
- Simplify userptr locking (Thomas H)
- Improvements to the GuC CTB code (Matt B, John)
- Make GT workaround upper bounds exclusive (Matt R)
- Check for nomodeset in i915_init() first (Daniel)
- Delete now unused gpu reloc code (Daniel)

- Document RFC plans for GuC submission, DRM scheduler and new parallel
  submit uAPI (Matt B)
- Reintroduce buddy allocator this time with TTM (Matt A)
- Support forcing page size with LMEM (Matt A)
- Add i915_sched_engine to abstract a submission queue between backends (Matt B)
- Use accelerated move in TTM (Ram)
- Fix memory leaks from TTM backend (Thomas H)
- Introduce WW transaction helper (Thomas H)
- Improve debug Kconfig texts a bit (Daniel)
- Unify user object creation code (Jason)
- Use a table for i915_init/exit (Jason)
- Move slabs to module init/exit (Daniel)
- Remove now unused i915_globals (Daniel)
- Extract i915_module.c (Daniel)

- Consistently use adl-p/adl-s in WA comments (Jose)
- Finish INTEL_GEN and friends conversion (Lucas)
- Correct variable/function namings (Lucas)
- Code checker fixes (Wan, Matt A)
- Tracepoint improvements (Matt B)
- Kerneldoc improvements (Tvrtko, Jason, Matt A, Maarten)
- Selftest improvements (Chris, Matt A, Tejas, Thomas H, John, Matt B,
  Rahul, Vinay)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YQ0JmYiXhGskNcrI@jlahtine-mobl.ger.corp.intel.com

drm/ingenic: Use standard drm_atomic_helper_commit_tail

By making the CRTC's .vblank_enable() function return an error when it
is known that the hardware won't deliver a VBLANK, we can drop the
ingenic_drm_atomic_helper_commit_tail() function and use the standard
drm_atomic_helper_commit_tail() function instead.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-4-paul@crapouillou.net

drm/ingenic: Remove dead code

The priv->ipu_plane would get a different value further down the code,
without the first assigned value being read first; so the first
assignation can be dropped.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-2-paul@crapouillou.net

Merge tag 'amd-drm-next-5.15-2021-08-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.15-2021-08-06:

amdgpu:
- Aldebaran fixes
- Powergating fix for Renoir
- Switch virtual DCE over to vkms based atomic modesetting
- Misc typo fixes
- PSP handling cleanups
- DC FP cleanups
- RAS fixes
- Wave debug improvements
- Freesync fix
- BACO/BOCO fixes
- Misc fixes

amdkfd:
- Expose gfx version in sysfs
- Aldebaran fixes

radeon:
- Coding style fix
- Typo fixes
- Pageflip fix

UAPI:
- amdkfd: SVM address range query
  Proposed userspace: https://github.com/RadeonOpenCompute/ROCR-Runtime/tree/memory_model_queries

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210806205248.3864-1-alexander.deucher@amd.com

Merge tag 'bus_remove_return_void-5.15' of git://git./linux/kernel/git/gregkh/driver-core into drm-next

Bus: Make remove callback return void tag

Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fixed up merge conflict in drm]
From:   Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/YPkwQwf0dUKnGA7L@kroah.com

drm: IRQ midlayer is now legacy

Hide the DRM midlayer behind CONFIG_DRM_LEGACY, make functions use
the prefix drm_legacy_, and move declarations to drm_legacy.h.
In struct drm_device, move the fields irq and irq_enabled behind
CONFIG_DRM_LEGACY.

All callers have been updated.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-15-tzimmermann@suse.de

drm: Remove unused devm_drm_irq_install()

DRM IRQ helpers will become legacy. The function devm_drm_irq_install()
is unused and won't be required later.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-14-tzimmermann@suse.de

drm/vc4: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-13-tzimmermann@suse.de

drm/tilcdc: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.

For most drivers, only the DRM IRQ helpers use irq_enabled from
struct drm_device. Tilcdc also uses irq_enabled to make its error
rollback work correctly. As the field will become legacy, duplicated
the state in the driver's local private structure.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-12-tzimmermann@suse.de

drm/tidss: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-11-tzimmermann@suse.de

drm/radeon: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-10-tzimmermann@suse.de

drm/mxsfb: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-9-tzimmermann@suse.de

drm/msm: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Acked-by: Rob Clark <robdclark@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-8-tzimmermann@suse.de

drm/kmb: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-7-tzimmermann@suse.de

drm/gma500: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it. DRM IRQ callbacks are now being called
directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-6-tzimmermann@suse.de

drm/fsl-dcu: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it. DRM IRQ callbacks are now being called
directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-5-tzimmermann@suse.de

drm/atmel-hlcdc: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it. DRM IRQ callbacks are now being called
directly or inlined.

v2:
* use managed release via devm_request_irq() (Sam)
* drop extra test for irq != IRQ_NOTCONNECTED (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Dan Sneddon <Dan.Sneddon@microchip.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-4-tzimmermann@suse.de

drm/arm/hdlcd: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.

v2:
* name struct drm_device variables 'drm' (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-3-tzimmermann@suse.de

drm/amdgpu: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

The interrupt number returned by pci_msi_vector() is now stored
in struct amdgpu_irq. Calls to pci_msi_vector() can fail and return
a negative errno code. Abort initlaizaton in thi case. The DRM IRQ
midlayer does not handle this correctly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-2-tzimmermann@suse.de

dma-buf: Fix a few typos in dma-buf documentation

Fix a few typos in the documentation:
- Remove an extraneous 'or'
- 'unpins' -> 'unpin'
- 'braket' -> 'bracket'
- 'mappinsg' -> 'mappings'
- 'fullfills' -> 'fulfills'

Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210809122247.15869-1-galpress@amazon.com

drm/vmwgfx: Replace "vmw_num_pages" with "PFN_UP"

we counld use PFN_UP instead of vmw_num_pages()

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210802033552.990-1-caihuoqing@baidu.com

drm/vmwgfx: Make use of PFN_ALIGN/PFN_UP helper macro

it's a refactor to make use of PFN_ALIGN/PFN_UP helper macro

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210802033308.927-1-caihuoqing@baidu.com

drm/vmwgfx: fix potential UAF in vmwgfx_surface.c

drm_file.master should be protected by either drm_device.master_mutex
or drm_file.master_lookup_lock when being dereferenced. However,
drm_master_get is called on unprotected file_priv->master pointers in
vmw_surface_define_ioctl and vmw_gb_surface_define_internal.

This is fixed by replacing drm_master_get with drm_file_get_master.

Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210724111824.59266-4-desmondcheongzx@gmail.com

drm/vmwgfx: Use list_move_tail instead of list_del/list_add_tail in vmwgfx_cmdbuf_res.c

Using list_move_tail() instead of list_del() + list_add_tail() in vmwgfx_cmdbuf_res.c.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609072248.1353421-1-libaokun1@huawei.com

drm/vmwgfx: Use list_move_tail instead of list_del/list_add_tail in vmwgfx_cmdbuf.c

Using list_move_tail() instead of list_del() + list_add_tail() in vmwgfx_cmdbuf.c.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609071803.1347254-1-libaokun1@huawei.com

drm/vmwgfx: Remove the repeated declaration

Function 'vmw_context_binding_list' is declared twice, remove the
repeated declaration.

Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1621930170-54923-1-git-send-email-zhangshaokun@hisilicon.com

drm/xlnx/zynqmp_disp: Fix incorrectly named enum 'zynqmp_disp_layer_id'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/xlnx/zynqmp_disp.c:101: warning: expecting prototype for enum zynqmp_disp_id. Prototype was for enum zynqmp_disp_layer_id instead

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Expose plane ordering to userspace

While the DPSUB has a fixed plane order, it still makes sense to expose
it to userspace to avoid hardcoding assumptions. Do so by adding an
immutable zpos property to planes.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Add global alpha support

The graphics plane has a global alpha setting. Expose it through the
plane's alpha property.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Fix graphics layer blending

To display the graphics layer, the global alpha needs to be enabled.
Enable it when the graphics plane is enabled (with full opacity), and
disable it otherwise.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Pass disp structure to all internal functions

The internal functions dealing with the audio/video buffer manager, the
blender, and the audio mixer, all receive pointers to the respective
objects. Those objects are embedded in the zynqmp_disp structure, and a
very small. Treating them as separate objects would require expanding
them with back-pointers to the zynqmp_disp in order to access fields
such as the device pointer for debug messages, and this isn't worth it.

Instead, merge those structures with the zynqmp_disp structure, and pass
the zynqmp_disp pointer to all internal functions.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp: Add zynqmp_disp_layer_is_video() to simplify the code

Add a new function zynqmp_disp_layer_is_video() to simplify the code
that judges if a layer is the video layer.

Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Renamed is_layer_vid() to zynqmp_disp_layer_is_video()]]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp: release reset to DP controller before accessing DP registers

When insmod zynqmp-dpsub.ko after rmmod it, system will hang with the
error log as below:

root@xilinx-zynqmp:~# insmod zynqmp-dpsub.ko
[   88.391289] [drm] Initialized zynqmp-dpsub 1.0.0 20130509 for fd4a0000.display on minor 0
[   88.529906] Console: switching to colour frame buffer device 128x48
[   88.549402] zynqmp-dpsub fd4a0000.display: [drm] fb0: zynqmp-dpsubdrm frame buffer device
[   88.571624] zynqmp-dpsub fd4a0000.display: ZynqMP DisplayPort Subsystem driver probed
root@xilinx-zynqmp:~# rmmod zynqmp_dpsub
[   94.023404] Console: switching to colour dummy device 80x25
root@xilinx-zynqmp:~# insmod zynqmp-dpsub.ko
<hang here>

This is because that in zynqmp_dp_probe it tries to access some DP
registers while the DP controller is still in the reset state. When
running "rmmod zynqmp_dpsub", zynqmp_dp_reset(dp, true) in
zynqmp_dp_phy_exit is called to force the DP controller into the reset
state. Then insmod will call zynqmp_dp_probe to program the DP registers,
but at this moment the DP controller hasn't been brought out of the reset
state yet since the function zynqmp_dp_reset(dp, false) is called later and
this will result the system hang.

Releasing the reset to DP controller before any read/write operation to it
will fix this issue. And for symmetry, move zynqmp_dp_reset() call from
zynqmp_dp_phy_exit() to zynqmp_dp_remove().

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Update dependencies for ZynqMP DP

ZynqMP DP requires the ZynqMP PHY and DPDMA to operate properly. So
depend on both the PHY and DPDMA.

Signed-off-by: Dylan Yip <dylan.yip@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Call pm_runtime_get_sync before setting pixel clock

The Runtime PM subsystem will force the device "fd4a0000.zynqmp-display"
to enter suspend state while booting if the following conditions are met:
- the usage counter is zero (pm_runtime_get_sync hasn't been called yet)
- no 'active' children (no zynqmp-dp-snd-xx node under dpsub node)
- no other device in the same power domain (dpdma node has no
"power-domains = <&zynqmp_firmware PD_DP>" property)

So there is a scenario as below:
1) DP device enters suspend state   <- call zynqmp_gpd_power_off
2) zynqmp_disp_crtc_setup_clock     <- configurate register VPLL_FRAC_CFG
3) pm_runtime_get_sync     <- call zynqmp_gpd_power_on and clear previous
       VPLL_FRAC_CFG configuration
4) clk_prepare_enable(disp->pclk)   <- enable failed since VPLL_FRAC_CFG
       configuration is corrupted

From above, we can see that pm_runtime_get_sync may clear register
VPLL_FRAC_CFG configuration and result the failure of clk enabling.
Putting pm_runtime_get_sync at the very beginning of the function
zynqmp_disp_crtc_atomic_enable can resolve this issue.

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/vkms: Use offset-adjusted shadow-plane mappings and output

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
vkms.

Also provide use the offset-adjusted data address for the writeback
job's output buffers. Output framebuffers with non-zero offsets now
have their content written to the correct location.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-12-tzimmermann@suse.de

drm/vbox: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
vbox.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-11-tzimmermann@suse.de

drm/udl: Use offset-adjusted shadow-plane mapping

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
udl.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-10-tzimmermann@suse.de

drm/simpledrm: Use offset-adjusted shadow-plane mapping

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
simpledrm.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-9-tzimmermann@suse.de

drm/gm12u320: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
gm12u320.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-8-tzimmermann@suse.de

drm/cirrus: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
cirrus.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-7-tzimmermann@suse.de

drm/mgag200: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
mgag200.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-6-tzimmermann@suse.de

drm/hyperv: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
hyperv.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-5-tzimmermann@suse.de

drm/gud: Get offset-adjusted mapping from drm_gem_fb_vmap()

Pass the data parameter to drm_gem_fb_vmap() to retrieve pointers
to the data. This address is different from the mapping addresses
for framebuffers with non-zero offsets. Replaces gud's internal
computation.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-4-tzimmermann@suse.de

drm/ast: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
ast.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-3-tzimmermann@suse.de

drm/gem: Provide offset-adjusted framebuffer BO mappings

Add an additional argument to drm_gem_fb_vmap() to return each BO's
mapping adjusted by the respective offset. Update all callers.

The newly returned values point to the first byite of the data stored
in the framebuffer BOs. Drivers that access the BO data should use it.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-2-tzimmermann@suse.de

drm/mgag200: Compute PLL values during atomic check

PLL setup can fail if the display mode's clock is not supported by
any PLL configuration. Compute the PLL values during atomic check, so
that atomic commits can fail at the appropriate time. If successful,
use the values in the atomic-update phase.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-14-tzimmermann@suse.de

drm/mgag200: Introduce custom CRTC state

Inherit from struct drm_crtc_state by embeding it and providing the
rsp callbacks for simple-kms helpers. No functional changes.

The new state struct mgag200_crtc_state will hold PLL values for modeset
operations.

v2:
* move the simple-kms changes into a separate patch (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-13-tzimmermann@suse.de

drm/simple-kms: Support custom CRTC state

Simple KMS helpers already support custom state for planes. Extend the
helpers to support custom CRTC state as well. Drivers can set the reset,
duplicate and destroy callbacks for the display pipeline's CRTC state
and inherit from struct drm_crtc_state by embedding an instance.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-12-tzimmermann@suse.de

drm/mgag200: Abstract pixel PLL via struct mgag200_pll

Move all PLL compute and update functions into mgag200_pll.c. No
functional changes to the rsp algorithms.

Introduce struct mgag200_pll and mgag200_pll_funcs. The data strutures
abstract the details of each revision's PLL. Perform calls to compute
and update functionality via function pointers. Init the PLL once as
part of the driver initialization.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-11-tzimmermann@suse.de

drm/mgag200: Declare PLL clock constants static const

Move the PLL constants to the RO data section by declaring them as
static const. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-10-tzimmermann@suse.de

drm/mgag200: Split PLL compute function for G200SE by rev

The compute function for G200SE pixel PLLs handles two revisions with
different algorithms. Split it accordingly to make it readable. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-9-tzimmermann@suse.de

drm/mgag200: Split PLL compute functions by device type

Several PLL functions compute values for different device types. Split
them up to make the code more readable. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-8-tzimmermann@suse.de

drm/mgag200: Store values (not bits) in struct mgag200_pll_values

The fields in struct mgag200_pll_values currently hold the bits of
each register. Store the PLL values instead and let the PLL-update
code figure out the bits for each register.

Until now, the compute function either stored plain values or register
bits in struct mgag200_pll_values. The rsp update function used the
values as-is. This made it very hard to correctly interpret the stored
values (e.g., for logging or debugging). With the cleanup, the stored
values now have a clear meaning.

v2:
* add a bit more context in the commit message (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-7-tzimmermann@suse.de

drm/mgag200: Introduce separate variable for PLL S parameter

The S parameter is controls the loop filter bandwidth when programming
the PLL. It's currently stored as part of P (i.e., the clock divider.)

Add a separate variable for S prepares the PLL code for further
refactoring. The value of s is currently 0, so it has not yet an effect
on the programming.

v2:
* add a note on the current value of s to commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-6-tzimmermann@suse.de

drm/mgag200: Split PLL setup into compute and update functions

The _set_plls() functions compute a pixel clock's PLL values
and program the hardware accordingly. This happens during atomic
commits.

For atomic modesetting, it's better to separate computation and
programming from each other. This will allow to compute the PLL
value during atomic checks and catch unsupported modes early.

Split the PLL setup into a compute and an update functions, and
call them one after the other. Computed PLL values are store in
struct mgag200_pll_values. There are four parameters for the PLL,
m, n, p and s. Every compute function stores a value for each
of these parameters, and the rsp update function makes the register
bits from them. The values stored by the compute function are
either plain values or register bits. An additional change is
required to always store plain values.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-5-tzimmermann@suse.de

drm/mgag200: Remove P_ARRAY_SIZE

Replace P_ARRAY_SIZE by array pre-initializing and ARRAY_SIZE(). No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-4-tzimmermann@suse.de

drm/mgag200: Return errno codes from PLL compute functions

Return -EINVAL if there's no PLL configuration for the given pixel
clock. The returned errors are currently ignored by the caller, but
the errno codes will become useful when the compute functions run
during atomic checks.

v2:
* give a rational for this change (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-3-tzimmermann@suse.de

drm/mgag200: Select clock in PLL update functions

Put the clock-selection code into each of the PLL-update functions to
make them select the correct pixel clock. Instead of copying the code,
introduce a new helper WREG_MISC_MASKED, which does masked writes into
<MISC>. Use it from each individual PLL update function.

The pixel clock for video output was not actually set before programming
the clock's values. It worked because the device had the correct clock
pre-set.

v2:
* don't duplicate <MISC> update code (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: db05f8d3dc87 ("drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.9+
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-2-tzimmermann@suse.de

drm/amdkfd: Allow querying SVM attributes that are clear

Currently the SVM get_attr call allows querying, which flags are set
in the entire address range. Add the opposite query, which flags are
clear in the entire address range. Both queries can be combined in a
single get_attr call, which allows answering questions such as, "is
this address range coherent, non-coherent, or a mix of both"?

Proposed userspace for UAPI:
https://github.com/RadeonOpenCompute/ROCR-Runtime/tree/memory_model_queries

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yand <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove redundant initialization of variable eng_id

The variable eng_id is being initialized with a value that is never
read, it is being re-assigned on the next statment. The assignment
is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: check for allocation failure in amdgpu_vkms_sw_init()

Check whether the kcalloc() fails and return -ENOMEM if it does.

Fixes: 84ec374bd58036 ("drm/amdgpu: create amdgpu_vkms (v4)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: bug fix for the runtime pm BACO

In some systems only MACO is supported. This is to fix the problem
that runtime pm is enabled but BACO is not supported. MACO will be
handled seperately.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/dg2: Add support for new DG2-G11 revid 0x5

The bspec has been updated with a new revision 0x5 that translates to B1
GT stepping and C0 display stepping.

Bspec: 44477
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805163647.801064-2-matthew.d.roper@intel.com

drm/bridge: anx7625: Tune K value for IVO panel

IVO panel require less input video clock variation than video clock
variation in DP CTS spec.

This patch decreases the K value of ANX7625 which will shrink eDP Tx
video clock variation to meet IVO panel's requirement.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210806104407.2208538-1-xji@analogixsemi.com

drm: bridge: it66121: Check drm_bridge_attach retval

The return value of drm_bridge_attach() is ignored during
the it66121_bridge_attach() call, which is incorrect.

Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805185039.402178-1-robert.foss@linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210805185039.402178-1-robert.foss@linaro.org

drm/amdgpu: Add preferred mode in modeset when freesync video mode's enabled.

[Why]
With kernel module parameter "freesync_video" is enabled, if the mode
is changed to preferred mode(the mode with highest rate), then Freesync
fails because the preferred mode is treated as one of freesync video
mode, and then be configurated as freesync video mode(fixed refresh
rate).

[How]
Skip freesync fixed rate configurating when modeset to preferred mode.

Signed-off-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Fix a memory leak in an error handling path in 'vangogh_tables_init()'

'watermarks_table' must be freed instead 'clocks_table', because
'clocks_table' is known to be NULL at this point and 'watermarks_table' is
never freed if the last kzalloc fails.

Fixes: c98ee89736b8 ("drm/amd/pm: add the fine grain tuning function for vangogh")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DRM: gpu: radeon: Fixed coding style issues

Fixed braces, an unnecessary if statement and added a missing space.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sergio Miguéns Iglesias <sergio@lony.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Update pitch for page flip

When primary bo is updated, crtc's pitch may
have not been updated, this will lead to show
disorder content when user changes display mode,
we update crtc's pitch in page flip to avoid
this bug.
This refers to amdgpu's pageflip.

v1->v2:
Update all of the pitch in all of the page_flip functions
in radeon rather than just the evergreen one.

v2->v3:
Update pitch set method for r100 according to
radeon_legacy_crtc.c

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Expose GFXIP engine version to sysfs

Add u32 gfx_target_version field to kfd_node_properties and
kfd_device_info. Populate <asic>_device_info structs accordingly and
expose to sysfs.

This allows eliminating device-ID-based lookup tables in user mode for
future ASICs.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop redundant null-pointer checks in amdgpu_ttm_tt_populate() and amdgpu_ttm_tt_unpopulate()

The varialbe gtt in the function amdgpu_ttm_tt_populate() and
amdgpu_ttm_tt_unpopulate() is guaranteed to be not NULL in the context.
Thus the null-pointer checks are redundant and can be dropped.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: don't enable baco on boco platforms in runpm

If the platform uses BOCO, don't use BACO in runtime suspend.
We could end up executing the BACO path if the platform supports
both.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1669
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Put MODE register in wave debug info

Add the MODE register into the per-wave debug information.
This register holds state such as FP rounding and denorm
modes, which exceptions are enabled, and active clamping
modes.

Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set RAS EEPROM address from VBIOS

update to latest atombios fw table

Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Recovery vcn instance iterate.

The previous logic is recording the amount of valid vcn instances
to use them on SRIOV, it is a hard task due to the vcn accessment is
based on the index of the vcn instance.

Check if the vcn instance enabled before do instance init.

Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: added synchronization for psp cmd buf access

resolved race condition accessing psp cmd submission memory

Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update PSP BL cmd IDs

resolved bug with incorrect PSP BL cmd IDs

Signed-off-by: John Clements <john.clements@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update smu v13.0.1 firmware header

Update smu v13.0.1 firmware header for yellow carp.

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add DID for beige goby

Add device ids.

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add regCP_MEx_INT_STAT_DEBUG for Aldebaran debugging

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: fix DMUB firmware version info

DMUB firmware info is printed before it gets initialized.
Correct this order to ensure true value is conveyed.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.147

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.77

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>