git.monstr.eu Git - linux-2.6-microblaze.git/log

drm/vmwgfx: fix potential UAF in vmwgfx_surface.c

drm_file.master should be protected by either drm_device.master_mutex
or drm_file.master_lookup_lock when being dereferenced. However,
drm_master_get is called on unprotected file_priv->master pointers in
vmw_surface_define_ioctl and vmw_gb_surface_define_internal.

This is fixed by replacing drm_master_get with drm_file_get_master.

Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210724111824.59266-4-desmondcheongzx@gmail.com

drm/vmwgfx: Use list_move_tail instead of list_del/list_add_tail in vmwgfx_cmdbuf_res.c

Using list_move_tail() instead of list_del() + list_add_tail() in vmwgfx_cmdbuf_res.c.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609072248.1353421-1-libaokun1@huawei.com

drm/vmwgfx: Use list_move_tail instead of list_del/list_add_tail in vmwgfx_cmdbuf.c

Using list_move_tail() instead of list_del() + list_add_tail() in vmwgfx_cmdbuf.c.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609071803.1347254-1-libaokun1@huawei.com

drm/vmwgfx: Remove the repeated declaration

Function 'vmw_context_binding_list' is declared twice, remove the
repeated declaration.

Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1621930170-54923-1-git-send-email-zhangshaokun@hisilicon.com

drm/amdgpu: Removed unnecessary if statement

There was an "if" statement that did nothing so it was removed.

Signed-off-by: Sergio Miguéns Iglesias <sergio@lony.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix kernel-doc warnings on non-kernel-doc comments

Don't use "begin kernel-doc notation" (/**) for comments that are
not kernel-doc. This eliminates warnings reported by the 0day bot.

drivers/gpu/drm/amd/amdgpu/gfx_v9_4_2.c:89: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
    * This shader is used to clear VGPRS and LDS, and also write the input
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_2.c:209: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
    * The below shaders are used to clear SGPRS, and also write the input
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_2.c:301: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
    * This shader is used to clear the uninitiated sgprs after the above

Fixes: 0e0036c7d13b ("drm/amdgpu: fix no full coverage issue for gprs initialization")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Dennis Li <Dennis.Li@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: use do-while-0 for DC_TRACE_LEVEL_MESSAGE()

Building with W=1 complains about an empty 'else' statement, so use the
usual do-nothing-while-0 loop to quieten this warning.

../drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:113:53: warning: suggest braces around empty body in an 'else' statement [-Wempty-body]
113 | *state, retry_count);

Fixes: b30eda8d416c ("drm/amd/display: Add ETW log to dmub_psr_get_state")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Wyatt Wood <wyatt.wood@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: use GFP_ATOMIC in amdgpu_dm_irq_schedule_work

Replace GFP_KERNEL with GFP_ATOMIC as amdgpu_dm_irq_schedule_work
can't sleep.

BUG: sleeping function called from invalid context at include/linux/sched/mm.h:196
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 253, name: kworker/6:1H
CPU: 6 PID: 253 Comm: kworker/6:1H Tainted: G W OE 5.11.0-promotion_2021_06_07-18_36_28_prelim_revert_retrain #8
Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021
Workqueue: events_highpri dm_irq_work_func [amdgpu]
Call Trace:
<IRQ>
dump_stack+0x5e/0x74
___might_sleep.cold+0x87/0x98
__might_sleep+0x4b/0x80
kmem_cache_alloc_trace+0x390/0x4f0
amdgpu_dm_irq_handler+0x171/0x230 [amdgpu]
amdgpu_irq_dispatch+0xc0/0x1e0 [amdgpu]
amdgpu_ih_process+0x81/0x100 [amdgpu]
amdgpu_irq_handler+0x26/0xa0 [amdgpu]
__handle_irq_event_percpu+0x49/0x190
? __hrtimer_get_next_event+0x4d/0x80
handle_irq_event_percpu+0x33/0x80
handle_irq_event+0x33/0x60
handle_edge_irq+0x82/0x190
asm_call_irq_on_stack+0x12/0x20
</IRQ>
common_interrupt+0xbb/0x140
asm_common_interrupt+0x1e/0x40
RIP: 0010:amdgpu_device_rreg.part.0+0x44/0xf0 [amdgpu]
Code: 53 48 89 fb 4c 3b af c8 08 00 00 73 6d 83 e2 02 75 0d f6 87 40 62 01 00 10 0f 85 83 00 00 00 4c 03 ab d0 08 00 00 45 8b 6d 00 <8b> 05 3e b6 52 00 85 c0 7e 62 48 8b 43 08 0f b7 70 3e 65 8b 05 e3
RSP: 0018:ffffae7740fff9e8 EFLAGS: 00000286
RAX: ffffffffc05ee610 RBX: ffff8aaf8f620000 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000005430 RDI: ffff8aaf8f620000
RBP: ffffae7740fffa08 R08: 0000000000000001 R09: 000000000000000a
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000005430
R13: 0000000071000000 R14: 0000000000000001 R15: 0000000000005430
? amdgpu_cgs_write_register+0x20/0x20 [amdgpu]
amdgpu_device_rreg+0x17/0x20 [amdgpu]
amdgpu_cgs_read_register+0x14/0x20 [amdgpu]
dm_read_reg_func+0x38/0xb0 [amdgpu]
generic_reg_wait+0x80/0x160 [amdgpu]
dce_aux_transfer_raw+0x324/0x7c0 [amdgpu]
dc_link_aux_transfer_raw+0x43/0x50 [amdgpu]
dm_dp_aux_transfer+0x87/0x110 [amdgpu]
drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper]
drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper]
drm_dp_get_one_sb_msg+0x349/0x480 [drm_kms_helper]
drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper]
? drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper]
dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu]
? dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu]
handle_hpd_rx_irq+0x195/0x240 [amdgpu]
? __switch_to_asm+0x42/0x70
? __switch_to+0x131/0x450
dm_irq_work_func+0x19/0x20 [amdgpu]
process_one_work+0x209/0x400
worker_thread+0x4d/0x3e0
? cancel_delayed_work+0xa0/0xa0
kthread+0x124/0x160
? kthread_park+0x90/0x90
ret_from_fork+0x22/0x30

Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase timeout threshold for DMCUB reset

[Why]
If we're backdoor loading the DMCUB performs more work than just
the PHY reset so we can end up resetting before the cleanup has fully
finished.

[How]
Increase timeout, add udelay between spins to guarantee a minimum.

Reviewed-by: Roy Chan <roy.chan@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clear GPINT after DMCUB has reset

[Why]
Otherwise we can end up processing whatever was left in the register
if the DMCUB was previously reset.

If DMCUB gets force reset too early from another client then we might
not have even acked the disable yet - causing DMCUB instantly shutdown
if the command was 10020000.

[How]
Move the GPINT clear outside of the reset loop and do it unconditionally
after the DMCUB has been properly reset.

Reviewed-by: Roy Chan <roy.chan@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.148

This version brings along following fixes:
- Fix memory allocation in dm IRQ context to use GFP_ATOMIC
- Increase timeout threshold for DMCUB reset
- Clear GPINT after DMCUB has reset
- Add AUX I2C tracing
- Fix code commenting style
- Some refactoring
- Remove invalid assert for ODM + MPC case

Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.78

Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add authentication_complete in hdcp output

[why]
DM needs to be notified when hdcp module has completed
authentication attempt.

Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add AUX I2C tracing.

[Why]
Developers can find it useful if the driver can produce
AUX traces without special equipment.

[How]
Add AUX tracing.

Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct comment style

Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Roy Chan <roy.chan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix incorrect CM/TF programming sequence in dwb

[How]
the programming sequeune was for old asic.
the correct programming sequeunce should be similar to the one
used in mpc. the fix is copied from the mpc programming sequeunce.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Roy Chan <roy.chan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: refactor the cursor programing codes

Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Roy Chan <roy.chan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: refactor the codes to centralize the stream/pipe checking logic

Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Roy Chan <roy.chan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix missing writeback disablement if plane is removed

[Why]
If the plane has been removed, the writeback disablement logic
doesn't run

[How]
fix the logic order

Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Roy Chan <roy.chan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove invalid assert for ODM + MPC case

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: skip locking delayed work if not initialized.

When init failed in early init stage, amdgpu_object has
not been initialized, so hasn't the ttm delayed queue functions.

Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Extend full access wait time in guest

- Extend wait time and add retry, currently 6s * 2times
- Change timing algorithm

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/mediatek: Test component initialization earlier in the function mtk_drm_crtc_create

The initialization is currently tested in a later stage in
the function for no reason.
In addition, the test '!comp' will never fail since comp is
set with the '&' operator. Instead, test if a comp was not
initialized by testing "!comp->dev".

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add support for main DDP path on MT8167

Add the main (DSI) drm display path for MT8167.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

dt-bindings: display: mediatek: dsi: add documentation for MT8167 SoC

Add binding documentation for the MT8167 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Implement mmap as GEM object function

Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.

The respective mediatek functions are being removed. The file_operations
structure fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/xlnx/zynqmp_disp: Fix incorrectly named enum 'zynqmp_disp_layer_id'

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/xlnx/zynqmp_disp.c:101: warning: expecting prototype for enum zynqmp_disp_id. Prototype was for enum zynqmp_disp_layer_id instead

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Expose plane ordering to userspace

While the DPSUB has a fixed plane order, it still makes sense to expose
it to userspace to avoid hardcoding assumptions. Do so by adding an
immutable zpos property to planes.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Add global alpha support

The graphics plane has a global alpha setting. Expose it through the
plane's alpha property.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Fix graphics layer blending

To display the graphics layer, the global alpha needs to be enabled.
Enable it when the graphics plane is enabled (with full opacity), and
disable it otherwise.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Pass disp structure to all internal functions

The internal functions dealing with the audio/video buffer manager, the
blender, and the audio mixer, all receive pointers to the respective
objects. Those objects are embedded in the zynqmp_disp structure, and a
very small. Treating them as separate objects would require expanding
them with back-pointers to the zynqmp_disp in order to access fields
such as the device pointer for debug messages, and this isn't worth it.

Instead, merge those structures with the zynqmp_disp structure, and pass
the zynqmp_disp pointer to all internal functions.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp: Add zynqmp_disp_layer_is_video() to simplify the code

Add a new function zynqmp_disp_layer_is_video() to simplify the code
that judges if a layer is the video layer.

Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Renamed is_layer_vid() to zynqmp_disp_layer_is_video()]]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp: release reset to DP controller before accessing DP registers

When insmod zynqmp-dpsub.ko after rmmod it, system will hang with the
error log as below:

root@xilinx-zynqmp:~# insmod zynqmp-dpsub.ko
[   88.391289] [drm] Initialized zynqmp-dpsub 1.0.0 20130509 for fd4a0000.display on minor 0
[   88.529906] Console: switching to colour frame buffer device 128x48
[   88.549402] zynqmp-dpsub fd4a0000.display: [drm] fb0: zynqmp-dpsubdrm frame buffer device
[   88.571624] zynqmp-dpsub fd4a0000.display: ZynqMP DisplayPort Subsystem driver probed
root@xilinx-zynqmp:~# rmmod zynqmp_dpsub
[   94.023404] Console: switching to colour dummy device 80x25
root@xilinx-zynqmp:~# insmod zynqmp-dpsub.ko
<hang here>

This is because that in zynqmp_dp_probe it tries to access some DP
registers while the DP controller is still in the reset state. When
running "rmmod zynqmp_dpsub", zynqmp_dp_reset(dp, true) in
zynqmp_dp_phy_exit is called to force the DP controller into the reset
state. Then insmod will call zynqmp_dp_probe to program the DP registers,
but at this moment the DP controller hasn't been brought out of the reset
state yet since the function zynqmp_dp_reset(dp, false) is called later and
this will result the system hang.

Releasing the reset to DP controller before any read/write operation to it
will fix this issue. And for symmetry, move zynqmp_dp_reset() call from
zynqmp_dp_phy_exit() to zynqmp_dp_remove().

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Update dependencies for ZynqMP DP

ZynqMP DP requires the ZynqMP PHY and DPDMA to operate properly. So
depend on both the PHY and DPDMA.

Signed-off-by: Dylan Yip <dylan.yip@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Call pm_runtime_get_sync before setting pixel clock

The Runtime PM subsystem will force the device "fd4a0000.zynqmp-display"
to enter suspend state while booting if the following conditions are met:
- the usage counter is zero (pm_runtime_get_sync hasn't been called yet)
- no 'active' children (no zynqmp-dp-snd-xx node under dpsub node)
- no other device in the same power domain (dpdma node has no
"power-domains = <&zynqmp_firmware PD_DP>" property)

So there is a scenario as below:
1) DP device enters suspend state   <- call zynqmp_gpd_power_off
2) zynqmp_disp_crtc_setup_clock     <- configurate register VPLL_FRAC_CFG
3) pm_runtime_get_sync     <- call zynqmp_gpd_power_on and clear previous
       VPLL_FRAC_CFG configuration
4) clk_prepare_enable(disp->pclk)   <- enable failed since VPLL_FRAC_CFG
       configuration is corrupted

From above, we can see that pm_runtime_get_sync may clear register
VPLL_FRAC_CFG configuration and result the failure of clk enabling.
Putting pm_runtime_get_sync at the very beginning of the function
zynqmp_disp_crtc_atomic_enable can resolve this issue.

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/vkms: Use offset-adjusted shadow-plane mappings and output

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
vkms.

Also provide use the offset-adjusted data address for the writeback
job's output buffers. Output framebuffers with non-zero offsets now
have their content written to the correct location.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-12-tzimmermann@suse.de

drm/vbox: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
vbox.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-11-tzimmermann@suse.de

drm/udl: Use offset-adjusted shadow-plane mapping

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
udl.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-10-tzimmermann@suse.de

drm/simpledrm: Use offset-adjusted shadow-plane mapping

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
simpledrm.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-9-tzimmermann@suse.de

drm/gm12u320: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
gm12u320.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-8-tzimmermann@suse.de

drm/cirrus: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
cirrus.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-7-tzimmermann@suse.de

drm/mgag200: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
mgag200.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-6-tzimmermann@suse.de

drm/hyperv: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
hyperv.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-5-tzimmermann@suse.de

drm/gud: Get offset-adjusted mapping from drm_gem_fb_vmap()

Pass the data parameter to drm_gem_fb_vmap() to retrieve pointers
to the data. This address is different from the mapping addresses
for framebuffers with non-zero offsets. Replaces gud's internal
computation.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-4-tzimmermann@suse.de

drm/ast: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
ast.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-3-tzimmermann@suse.de

drm/gem: Provide offset-adjusted framebuffer BO mappings

Add an additional argument to drm_gem_fb_vmap() to return each BO's
mapping adjusted by the respective offset. Update all callers.

The newly returned values point to the first byite of the data stored
in the framebuffer BOs. Drivers that access the BO data should use it.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-2-tzimmermann@suse.de

drm/mgag200: Compute PLL values during atomic check

PLL setup can fail if the display mode's clock is not supported by
any PLL configuration. Compute the PLL values during atomic check, so
that atomic commits can fail at the appropriate time. If successful,
use the values in the atomic-update phase.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-14-tzimmermann@suse.de

drm/mgag200: Introduce custom CRTC state

Inherit from struct drm_crtc_state by embeding it and providing the
rsp callbacks for simple-kms helpers. No functional changes.

The new state struct mgag200_crtc_state will hold PLL values for modeset
operations.

v2:
* move the simple-kms changes into a separate patch (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-13-tzimmermann@suse.de

drm/simple-kms: Support custom CRTC state

Simple KMS helpers already support custom state for planes. Extend the
helpers to support custom CRTC state as well. Drivers can set the reset,
duplicate and destroy callbacks for the display pipeline's CRTC state
and inherit from struct drm_crtc_state by embedding an instance.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-12-tzimmermann@suse.de

drm/mgag200: Abstract pixel PLL via struct mgag200_pll

Move all PLL compute and update functions into mgag200_pll.c. No
functional changes to the rsp algorithms.

Introduce struct mgag200_pll and mgag200_pll_funcs. The data strutures
abstract the details of each revision's PLL. Perform calls to compute
and update functionality via function pointers. Init the PLL once as
part of the driver initialization.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-11-tzimmermann@suse.de

drm/mgag200: Declare PLL clock constants static const

Move the PLL constants to the RO data section by declaring them as
static const. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-10-tzimmermann@suse.de

drm/mgag200: Split PLL compute function for G200SE by rev

The compute function for G200SE pixel PLLs handles two revisions with
different algorithms. Split it accordingly to make it readable. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-9-tzimmermann@suse.de

drm/mgag200: Split PLL compute functions by device type

Several PLL functions compute values for different device types. Split
them up to make the code more readable. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-8-tzimmermann@suse.de

drm/mgag200: Store values (not bits) in struct mgag200_pll_values

The fields in struct mgag200_pll_values currently hold the bits of
each register. Store the PLL values instead and let the PLL-update
code figure out the bits for each register.

Until now, the compute function either stored plain values or register
bits in struct mgag200_pll_values. The rsp update function used the
values as-is. This made it very hard to correctly interpret the stored
values (e.g., for logging or debugging). With the cleanup, the stored
values now have a clear meaning.

v2:
* add a bit more context in the commit message (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-7-tzimmermann@suse.de

drm/mgag200: Introduce separate variable for PLL S parameter

The S parameter is controls the loop filter bandwidth when programming
the PLL. It's currently stored as part of P (i.e., the clock divider.)

Add a separate variable for S prepares the PLL code for further
refactoring. The value of s is currently 0, so it has not yet an effect
on the programming.

v2:
* add a note on the current value of s to commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-6-tzimmermann@suse.de

drm/mgag200: Split PLL setup into compute and update functions

The _set_plls() functions compute a pixel clock's PLL values
and program the hardware accordingly. This happens during atomic
commits.

For atomic modesetting, it's better to separate computation and
programming from each other. This will allow to compute the PLL
value during atomic checks and catch unsupported modes early.

Split the PLL setup into a compute and an update functions, and
call them one after the other. Computed PLL values are store in
struct mgag200_pll_values. There are four parameters for the PLL,
m, n, p and s. Every compute function stores a value for each
of these parameters, and the rsp update function makes the register
bits from them. The values stored by the compute function are
either plain values or register bits. An additional change is
required to always store plain values.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-5-tzimmermann@suse.de

drm/mgag200: Remove P_ARRAY_SIZE

Replace P_ARRAY_SIZE by array pre-initializing and ARRAY_SIZE(). No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-4-tzimmermann@suse.de

drm/mgag200: Return errno codes from PLL compute functions

Return -EINVAL if there's no PLL configuration for the given pixel
clock. The returned errors are currently ignored by the caller, but
the errno codes will become useful when the compute functions run
during atomic checks.

v2:
* give a rational for this change (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-3-tzimmermann@suse.de

drm/mgag200: Select clock in PLL update functions

Put the clock-selection code into each of the PLL-update functions to
make them select the correct pixel clock. Instead of copying the code,
introduce a new helper WREG_MISC_MASKED, which does masked writes into
<MISC>. Use it from each individual PLL update function.

The pixel clock for video output was not actually set before programming
the clock's values. It worked because the device had the correct clock
pre-set.

v2:
* don't duplicate <MISC> update code (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: db05f8d3dc87 ("drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.9+
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-2-tzimmermann@suse.de

dt-bindings: display: msm: dsi-controller-main: restore assigned-clocks

Restore the assgined-clocks and assigned-clock-parents properties that
were lost during the txt -> YAML conversion.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210709210729.953114-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: make dpu_hw_ctl_clear_all_blendstages clear necessary LMs

dpu_hw_ctl_clear_all_blendstages() clears settings for the few first LMs
instead of mixers actually used for the CTL. Change it to clear
necessary data, using provided mixer ids.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210704230519.4081467-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: add support for alpha blending properties

Add support for alpha blending properties. Setup the plane blend state
according to those properties.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210628191958.2754731-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: update is_connected status base on sink count at dp_pm_resume()

Currently at dp_pm_resume() is_connected state is decided base on hpd connection
status only. This will put is_connected in wrongly "true" state at the scenario
that dongle attached to DUT but without hmdi cable connecting to it. Fix this
problem by adding read sink count from dongle and decided is_connected state base
on both sink count and hpd connection status.

Changes in v2:
-- remove dp_get_sink_count() cand call drm_dp_read_sink_count()

Changes in v3:
-- delete status local variable from dp_pm_resume()

Changes in v4:
-- delete un necessary comment at dp_pm_resume()

Fixes: d9aa6571b28ba ("drm/msm/dp: check sink_count before update is_connected status")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Link: https://lore.kernel.org/r/1628092261-32346-1-git-send-email-khsieh@codeaurora.org
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1: add safe lut config in dpu driver

Add safe lut configuration for all the targets in dpu
driver as per QOS recommendation.

Issue reported on SC7280:

With wait-for-safe feature in smmu enabled, RT client
buffer levels are checked to be safe before smmu invalidation.
Since display was always set to unsafe it was delaying the
invalidaiton process thus impacting the performance on NRT clients
such as eMMC and NVMe.

Validated this change on SC7280, With this change eMMC performance
has improved significantly.

Changes in v2:
- Add fixes tag (Sai)
- CC stable kernel (Dimtry)

Changes in v3:
- Correct fixes tag with appropriate hash (stephen)
- Resend patch adding reviewed by tag
- Resend patch adding correct format for pushing into stable tree (Greg)

Fixes: 591e34a091d1 ("drm/msm/disp/dpu1: add support for display for SC7280 target")
Cc: stable@vger.kernel.org
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> (sc7280, sc7180)
Link: https://lore.kernel.org/r/1628070028-2616-1-git-send-email-kalyan_t@codeaurora.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: Remove unused variable

Kernel test roobot throws below warning ->

drivers/gpu/drm/msm/dp/dp_display.c:1017:21:
warning: variable 'drm' set but not used [-Wunused-but-set-variable]

Removed unused variable drm.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Link: https://lore.kernel.org/r/20210709024834.29680-1-jrdr.linux@gmail.com
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660

VDDA is not present and the specified load value is wrong. Fix it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222057.52641-1-konrad.dybcio@somainline.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: remove a repeated including of <linux/debugfs.h>

Remove a repeated "#include <linux/debugfs.h>" in line 19 of the original
file.

Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20210729030140.99500-1-guozhengkui@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: add logs across DP driver for ease of debugging

Add trace points across the MSM DP driver to help debug
interop issues.

Changes in v2:
- Got rid of redundant log messages.
- Added %#x instead of 0x%x wherever required.
- Got rid of __func__ calls in debug messages.
- Added newline wherever missing.

Changes in v3:
- Got rid of redundant log messages.
- Unstuck colon from printf specifier in various places.

Changes in v4:
- Changed goto statement and used if else-if

Changes in v5:
- Changed if else if statement,
to not overwrite the ret variable multiple times.
Changes in v6:
- Changed a wrong log message.
Signed-off-by: Maitreyee Rao <maitreye@codeaurora.org>
Link: https://lore.kernel.org/r/1627346298-11528-1-git-send-email-maitreye@codeaurora.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/kms: drop set_encoder_mode callback

set_encoder_mode callback is completely unused now. Drop it from
msm_kms_func().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210717124016.316020-8-dmitry.baryshkov@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: stop calling set_encoder_mode callback

None of the display drivers now implement set_encoder_mode callback.
Stop calling it from the modeset init code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210717124016.316020-7-dmitry.baryshkov@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: stop calling set_encoder_mode callback

None of the display drivers now implement set_encoder_mode callback.
Stop calling it from the modeset init code.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210717124016.316020-6-dmitry.baryshkov@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/mdp5: move mdp5_encoder_set_intf_mode after msm_dsi_modeset_init

Move a call to mdp5_encoder_set_intf_mode() after
msm_dsi_modeset_init(), removing set_encoder_mode callback.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210717124016.316020-5-dmitry.baryshkov@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: support setting up two independent DSI connectors

Move setting up encoders from set_encoder_mode to
_dpu_kms_initialize_dsi() / _dpu_kms_initialize_displayport(). This
allows us to support not only "single DSI" and "bonded DSI" but also "two
independent DSI" configurations. In future this would also help adding
support for multiple DP connectors.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210717124016.316020-4-dmitry.baryshkov@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: add three helper functions

Add three helper functions to be used by display drivers for setting up
encoders.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210717124016.316020-3-dmitry.baryshkov@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: rename dual DSI to bonded DSI

We are preparing to support two independent DSI hosts in the DSI/DPU
code. To remove possible confusion (as both configurations can be
referenced as dual DSI) let's rename old "dual DSI" (two DSI hosts
driving single device, with clocks being locked) to "bonded DSI".

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210717124016.316020-2-dmitry.baryshkov@linaro.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[DB: add one extra hunk added by one previous patches]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: add support for dsi test pattern generator

During board bringups its useful to have a DSI test pattern
generator to isolate a DPU vs a DSI issue and focus on the relevant
hardware block.

To facilitate this, add an API which triggers the DSI controller
test pattern. The expected output is a rectangular checkered pattern.

This has been validated on a single DSI video mode panel by calling it
right after drm_panel_enable() which is also the ideal location to use
this as the DSI host and the panel have been initialized by then.

Further validation on dual DSI and command mode panel is pending.
If there are any fix ups needed for those, it shall be applied on top
of this change.

Changes in v2:
- generate the new dsi.xml.h and update the bitfield names

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/1626922232-29105-2-git-send-email-abhinavk@codeaurora.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: update dsi register header file for tpg

Update the DSI controller header XML file to add registers
and bitfields to support rectangular checkered pattern
generator.

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/1626922232-29105-1-git-send-email-abhinavk@codeaurora.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[DB: removed headergen commit changes]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: Add DSI support for SC7280

Add support for v2.5.0 DSI block in the SC7280 SoC.

Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1624365748-24224-4-git-send-email-rajeevny@codeaurora.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: Add PHY configuration for SC7280

The SC7280 SoC uses the 7nm (V4.1) DSI PHY driver with
different enable|disable regulator loads.

Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1624365748-24224-3-git-send-email-rajeevny@codeaurora.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

dt-bindings: msm/dsi: Add sc7280 7nm dsi phy

The SC7280 SoC uses the 7nm (V4.1) DSI PHY driver.

Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Link: https://lore.kernel.org/r/1624365748-24224-2-git-send-email-rajeevny@codeaurora.org
Acked-by: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: drop msm_dsi_phy_get_shared_timings

Instead of fetching shared timing through an extra function call, get
them directly from msm_dsi_phy_enable.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210709210729.953114-9-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: phy: use of_device_get_match_data

Use of_device_get_match-data() instead of of_match_node().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210709210729.953114-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: Add newlines to printks

Add some missing newlines to the various DRM printks in this file.
Noticed while looking at logs. While we're here unbreak quoted
strings so grepping them is easier.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210708065619.999199-1-swboyd@chromium.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: mdp4: drop vblank get/put from prepare/complete_commit

msm_atomic is doing vblank get/put's already,
currently there no need to duplicate the effort in MDP4

Fix warning:
...
WARNING: CPU: 3 PID: 79 at drivers/gpu/drm/drm_vblank.c:1194 drm_vblank_put+0x1cc/0x1d4
...
and multiple vblank time-outs:
...
msm 5100000.mdp: vblank time out, crtc=1
...

Tested on Nexus 7 2013 (deb), LTS 5.10.50.

Introduced by: 119ecb7fd3b5 ("drm/msm/mdp4: request vblank during modeset")

Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210715060925.7880-1-david@ixit.cz
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/mdp4: move HW revision detection to earlier phase

Fixes if condition, which never worked inside mdp4_kms_init, since
HW detection has been done later in mdp4_hw_init.

Fixes: eb2b47bb9a03 ("drm/msm/mdp4: only use lut_clk on mdp4.2+")

Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210705231641.315804-2-david@ixit.cz
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/mdp4: refactor HW revision detection into read_mdp_hw_revision

Inspired by MDP5 code.
Also use DRM_DEV_INFO for MDP version as MDP5 does.

Cosmetic change: uint32_t -> u32 - checkpatch suggestion.

Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210705231641.315804-1-david@ixit.cz
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Fix error return code in msm_drm_init()

When it fail to create crtc_event kthread, it just jump to err_msm_uninit,
while the 'ret' is not updated. So assign the return code before that.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210705134302.315813-1-liwei391@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: drop gdsc regulator handling

None of supported devies uses "gdsc" regulator for DSI. GDSC support is
now implemented as a power domain. Drop old code and config handling
gdsc regulator requesting and enabling.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210701000015.3347713-1-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: support CPHY mode for 7nm pll/phy

Add the required changes to support 7nm pll/phy in CPHY mode.

This adds a "qcom,dsi-phy-cphy-mode" property for the PHY node to enable
the CPHY mode.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210617144349.28448-4-jonathan@marek.ca
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

dt-bindings: msm: dsi: document phy-type property for 7nm dsi phy

Document a new phy-type property which will be used to determine whether
the phy should operate in D-PHY or C-PHY mode.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210617144349.28448-3-jonathan@marek.ca
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

dt-bindings: msm: dsi: add missing 7nm bindings

These got lost when going from .txt to .yaml bindings, add them back.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Fixes: 8fc939e72ff8 ("dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings")
Link: https://lore.kernel.org/r/20210617144349.28448-2-jonathan@marek.ca
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Use list_move_tail instead of list_del/list_add_tail in msm_gem.c

Using list_move_tail() instead of list_del() + list_add_tail() in msm_gem.c.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20210609072838.1369371-1-libaokun1@huawei.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Use nvmem_cell_read_variable_le_u32() to read speed bin

Let's use the newly-added nvmem_cell_read_variable_le_u32() to future
proof ourselves a little bit.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210521134516.v2.1.Id496c6fea0cb92ff6ea8ef1faf5d468eb09465e3@changeid
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Periodically update RPTR shadow

On a5xx and a6xx devices that are using CP_WHERE_AM_I to update a
ringbuffer read-ptr shadow value, periodically emit a CP_WHERE_AM_I
every 32 commands, so that a later submit waiting for ringbuffer
space to become available sees partial progress, rather than not
seeing rptr advance at all until the GPU gets to the end of the
submit that it is currently chewing on.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210428193654.1498482-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Implement mmap as GEM object function

Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.

The respective msm functions are being removed. The file_operations
structure fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().

v2:
* rebase onto latest upstream
* remove declaration of msm_gem_mmap_obj() from msm_fbdev.c

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210706084753.8194-1-tzimmermann@suse.de
[squash in missing VM_DONTEXPAND flag]
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm: msm: Add 680 gpu to the adreno gpu list

This patch adds a Adreno 680 entry to the gpulist.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210725032002.3961691-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/amdkfd: Allow querying SVM attributes that are clear

Currently the SVM get_attr call allows querying, which flags are set
in the entire address range. Add the opposite query, which flags are
clear in the entire address range. Both queries can be combined in a
single get_attr call, which allows answering questions such as, "is
this address range coherent, non-coherent, or a mix of both"?

Proposed userspace for UAPI:
https://github.com/RadeonOpenCompute/ROCR-Runtime/tree/memory_model_queries

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yand <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>