Merge commit '81fd23e2b3ccf71c807e671444e8accaba98ca53' of https://git.pengutronix.de/git/lst/linux into drm-next

things are still slow in etnaviv land. Just one hardware support
addition for the GPU found on the NXP Layerscape LS1028A SoC from
Michael and the GEM mmap cleanup from Thomas.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/4d16197fa5e4147117fea842f1ed9f0fdadb1d57.camel@pengutronix.de

Merge tag 'amd-drm-next-5.15-2021-08-20' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.15-2021-08-20:

amdgpu:
- embed hw fence into job
- Misc SMU fixes
- PSP TA code cleanup
- RAS fixes
- PWM fan speed fixes
- DC workqueue cleanups
- SR-IOV fixes
- gfxoff delayed work fix
- Pin domain check fix

amdkfd:
- SVM fixes

radeon:
- Code cleanup

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210820172335.4190-1-alexander.deucher@amd.com

drm/amdgpu: Cancel delayed work when GFXOFF is disabled

schedule_delayed_work does not push back the work if it was already
scheduled before, so amdgpu_device_delay_enable_gfx_off ran ~100 ms
after the first time GFXOFF was disabled and re-enabled, even if GFXOFF
was disabled and re-enabled again during those 100 ms.

This resulted in frame drops / stutter with the upcoming mutter 41
release on Navi 14, due to constantly enabling GFXOFF in the HW and
disabling it again (for getting the GPU clock counter).

To fix this, call cancel_delayed_work_sync when the disable count
transitions from 0 to 1, and only schedule the delayed work on the
reverse transition, not if the disable count was already 0. This makes
sure the delayed work doesn't run at unexpected times, and allows it to
be lock-free.

v2:
* Use cancel_delayed_work_sync & mutex_trylock instead of
  mod_delayed_work.
v3:
* Make amdgpu_device_delay_enable_gfx_off lock-free (Christian König)
v4:
* Fix race condition between amdgpu_gfx_off_ctrl incrementing
  adev->gfx.gfx_off_req_count and amdgpu_device_delay_enable_gfx_off
  checking for it to be 0 (Evan Quan)

Cc: stable@vger.kernel.org
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> # v3
Acked-by: Christian König <christian.koenig@amd.com> # v3
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use the preferred pin domain after the check

For some reason we run into an use case where a BO is already pinned
into GTT, but should be pinned into VRAM|GTT again.

Handle that case gracefully as well.

Reviewed-by: Shashank Sharma <Shashank.sharma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/pm: a quick fix for "divided by zero" error

Considering Arcturus is a dedicated ASIC for computing, it
will be more proper to drop the support for fan speed reading
and setting. That's on the TODO list.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Rui Teng <rui.teng@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: amdgpu: remove obsolete reference to config CHASH

Commit 04ed8459f334 ("drm/amdgpu: remove chash") removes the chash
architecture and its corresponding config CHASH.

There is still a reference to CHASH in the config DRM_AMDGPU in
./drivers/gpu/drm/Kconfig.

Remove this obsolete reference to config CHASH.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Fix spelling mistake "firwmare" -> "firmware"

There is a spelling mistake in a dev_err error message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu:flush ttm delayed work before cancel_sync

[Why]
In some cases when we unload driver, warning call trace
will show up in vram_mgr_fini which claims that LRU is not empty, caused
by the ttm bo inside delay deleted queue.

[How]
We should flush delayed work to make sure the delay deleting is done.

Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: consolidate TA shared memory structures

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: increase max xgmi physical node for aldebaran

aldebaran supports up to 16 xgmi physical nodes.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable BACO support for 699F:C7 polaris12 SKU temporarily

We have a S3 issue on that SKU with BACO enabled. Will bring back this
when that root caused.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use DCN30 watermark calc for DCN301

[why]
dcn301_calculate_wm_and_dl() causes flickering when external monitor is
connected.

This issue has been fixed before by commit 0e4c0ae59d7e
("drm/amdgpu/display: drop dcn301_calculate_wm_and_dl for now"), however
part of the fix was gone after commit 2cbcb78c9ee5 ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next").

[how]
Use dcn30_calculate_wm_and_dlg() instead as in the original fix.

Fixes: 2cbcb78c9ee5 ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next")

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Tested-by: Zhan Liu <zhan.liu@amd.com>
Tested-by: Oliver Logush <oliver.logush@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct MMSCH 1.0 version

MMSCH 1.0 doesn't have major/minor version, only verison.

Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed by Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: get extended xgmi topology data

The TA has a limit to the amount of data that can be retrieved from
GET_TOPOLOGY.  For setups that exceed this limit, the xGMI topology
needs to be re-initialized and data needs to be re-fetched from the
extended link records by setting a flag in the shared command buffer.

The number of hops and the number of links must be accumulated by the
driver. Other data points are all fetched from the first request.
Because the TA has already exceeded its link record limit, it
cannot hold bidirectional information.  Otherwise the driver would
have to do more than two fetches so the driver has to reflect the
topology information in the opposite direction.

v2: squashed with internal reviewed fix

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Hawking Zhang <hawking.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-msm-next-2021-08-12' of https://gitlab.freedesktop.org/drm/msm into drm-next

This is the main pull for v5.15, after the early pull request with
drm/scheduler conversion:

* New a6xx GPU support: a680 and 7c3
* dsi: 7nm phi, sc7280 support, test pattern generator support
* mdp4 fixes for older hw like the nexus7
* displayport fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs_tyanTeDGMH1X+Uf4wdyy7jYj-CinGXXVETiYOESahw@mail.gmail.com

Merge tag 'mediatek-drm-next-5.15' of https://git./linux/kernel/git/chunkuang.hu/linux into drm-next

Mediatek DRM Next for Linux 5.15

1. MT8133 AAL support, adjust rdma fifo threshold formula.
2. Implement mmap as GEM object function.
3. Add support for MT8167.
4. Test component initialization earlier in the function mtk_drm_crtc_create.
5. CMDQ refinement.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210816232427.13368-1-chunkuang.hu@kernel.org

drm/mediatek: Clear pending flag when cmdq packet is done

In cmdq mode, packet may be flushed before it is executed, so
the pending flag should be cleared after cmdq packet is done.

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Add cmdq_handle in mtk_crtc

One mtk_crtc need just one cmdq_handle, so add one cmdq_handle
in mtk_crtc to prevent frequently allocation and free of
cmdq_handle.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Detect CMDQ execution timeout

CMDQ is used to update display register in vblank period, so
it should be execute in next vblank. If it fail to execute
in next 2 vblank, tiemout happen.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Remove struct cmdq_client

In mailbox rx_callback, it pass struct mbox_client to callback
function, but it could not map back to mtk_drm_crtc instance
because struct cmdq_client use a pointer to struct mbox_client:

struct cmdq_client {
struct mbox_client client;
struct mbox_chan *chan;
};

struct mtk_drm_crtc {
/* client instance data */
struct cmdq_client *cmdq_client;
};

so remove struct cmdq_client and let mtk_drm_crtc instance define
mbox_client as:

struct mtk_drm_crtc {
/* client instance data */
struct mbox_client cl;
};

and in rx_callback function, use struct mbox_client to get
struct mtk_drm_crtc.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb

rx_callback is a standard mailbox callback mechanism and could cover the
function of proprietary cmdq_task_cb, so use the standard one instead of
the proprietary one.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/radeon: Add break to switch statement in radeonfb_create_pinned_object()

Clang + -Wimplicit-fallthrough warns:

drivers/gpu/drm/radeon/radeon_fb.c:170:2: warning: unannotated
fall-through between switch labels [-Wimplicit-fallthrough]
        default:
        ^
drivers/gpu/drm/radeon/radeon_fb.c:170:2: note: insert 'break;' to avoid
fall-through
        default:
        ^
        break;
1 warning generated.

Clang's version of this warning is a little bit more pedantic than
GCC's. Add the missing break to satisfy it to match what has been done
all over the kernel tree.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.149

This version brings along following fixes:
- Ensure DCN save init registers after VM setup
- Fix multi-display support for idle opt workqueue
- Use vblank control events for PSR enable/disable
- Create default dc_sink when fail reading EDID under MST

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.79

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Guard vblank wq flush with DCN guards

[Why]
Compilation of the workqueue fails if not building with the DCN config
option set.

[How]
Guard calls to the flush with the DCN config option to fix the build.

Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Ensure DCN save after VM setup

[Why]
DM initializes VM context after DMCUB initialization.
This results in loss of DCN_VM_CONTEXT registers after z10.

[How]
Notify DMCUB when VM setup is complete, and have DMCUB
save init registers.

v2: squash in CONFIG_DRM_AMD_DC_DCN3_1 fix

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use vblank control events for PSR enable/disable

[Why]
PSR can disable the HUBP along with the OTG when PSR is active.

We'll hit a pageflip timeout when the OTG is disable because we're no
longer updating the CRTC vblank counter and the pflip high IRQ will
not fire on the flip.

In order to flip the page flip timeout occur we should modify the
enter/exit conditions to match DRM requirements.

[How]
Use our deferred handlers for DRM vblank control to notify DMCU(B)
when it can enable or disable PSR based on whether vblank is disabled or
enabled respectively.

We'll need to pass along the stream with the notification now because
we want to access the CRTC state while the CRTC is locked to get the
stream state prior to the commit.

Retain a reference to the stream so it remains safe to continue to
access and release that reference once we're done with it.

Enable/disable logic follows what we were previously doing in
update_planes.

The workqueue has to be flushed before programming streams or planes
to ensure that we exit out of idle optimizations and PSR before
these events occur if necessary.

To keep the skip count logic the same to avoid FBCON PSR enablement
requires copying the allow condition onto the DM IRQ parameters - a
field that we can actually access from the worker.

Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix multi-display support for idle opt workqueue

[Why]
The current implementation for idle optimization support only has a
single work item that gets reshuffled into the system workqueue
whenever we receive an enable or disable event.

We can have mismatched events if the work hasn't been processed or if
we're getting control events from multiple displays at once.

This fixes this issue and also makes the implementation usable for
PSR control - which will be addressed in another patch.

[How]
We need to be able to flush remaining work out on demand for driver stop
and psr disable so create a driver specific workqueue instead of using
the system one. The workqueue will be single threaded to guarantee the
ordering of enable/disable events.

Refactor the queue to allocate the control work and deallocate it
after processing it.

Pass the acrtc directly to make it easier to handle psr enable/disable
in a later patch.

Rename things to indicate that it's not just MALL specific.

Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Create dc_sink when EDID fail

[Why]
While reading remote EDID via Startech 1-to-4 hub, occasionally we
won't get response in time and won't light up corresponding monitor.

Ideally, we can still add generic modes for userspace to choose to try
to light up the monitor and which is done in
drm_helper_probe_single_connector_modes(). So the main problem here is
that we fail .mode_valid since we don't create remote dc_sink for this
case.

[How]
Also add default dc_sink if we can't get the EDID.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the address of Arcturus fan related registers

These registers have different address from other SMU V11 ASICs.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop unnecessary manual mode check

As the fan control was guarded under manual mode before fan speed
RPM/PWM setting. Thus the extra check is totally redundant.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop the unnecessary intermediate percent-based transition

Currently, the readout of fan speed pwm is transited into percent-based
and then pwm-based. However, the transition into percent-based is totally
unnecessary and make the final output less accurate.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the fan speed RPM retrieving

The relationship "PWM = RPM / smu->fan_max_rpm" between fan speed
PWM and RPM is not true for SMU11 ASICs. So, we need a new way to
retrieving the fan speed RPM.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the fan speed PWM retrieving

The relationship "PWM = RPM / smu->fan_max_rpm" between fan speed
PWM and RPM is not true for SMU11 ASICs. So, we need a new way to
retrieving the fan speed PWM.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: record the RPM and PWM based fan speed settings

As the relationship "PWM = RPM / smu->fan_max_rpm" between fan speed
PWM and RPM is not true for SMU11 ASICs. So, both the RPM and PWM
settings need to be saved.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the fan speed RPM setting

The relationship "PWM = RPM / smu->fan_max_rpm" between fan speed
PWM and RPM is not true for SMU11 ASICs. So, we need a new way to
perform the fan speed RPM setting.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: remove unnecessary RAS context field

Delete ras_if->name in the RAS ctx structure and remove related lines.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix random KFDSVMRangeTest.SetGetAttributesTest test failure

KFDSVMRangeTest.SetGetAttributesTest randomly fails in stress test.

Note: Google Test filter = KFDSVMRangeTest.*
[==========] Running 18 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 18 tests from KFDSVMRangeTest
[ RUN      ] KFDSVMRangeTest.BasicSystemMemTest
[       OK ] KFDSVMRangeTest.BasicSystemMemTest (30 ms)
[ RUN      ] KFDSVMRangeTest.SetGetAttributesTest
[          ] Get default atrributes
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:154: Failure
Value of: expectedDefaultResults[i]
  Actual: 4294967295
Expected: outputAttributes[i].value
Which is: 0
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:154: Failure
Value of: expectedDefaultResults[i]
  Actual: 4294967295
Expected: outputAttributes[i].value
Which is: 0
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:152: Failure
Value of: expectedDefaultResults[i]
  Actual: 4
Expected: outputAttributes[i].type
Which is: 2
[          ] Setting/Getting atrributes
[  FAILED  ]

the root cause is that svm work queue has not finished when svm_range_get_attr is called, thus
some garbage svm interval tree data make svm_range_get_attr get wrong result. Flush work queue before
iterate svm interval tree.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: change the workload type for some cards

change the workload type for some cards as it is needed.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/pm: fix workload mismatch on vega10"

This reverts commit 0979d43259e13846d86ba17e451e17fec185d240.
Revert this because it does not apply to all the cards.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: consolidate PSP TA context

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add MB_REQ_MSG_READY_TO_RESET response when VF get FLR notification.

When guest received FLR notification from host, it would
lock adapter into reset state. There will be no more
job submission and hardware access after that.

Then it should send a response to host that it has prepared
for host reset.

Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: change pp_dpm_sclk/mclk/fclk attribute is RO for aldebaran

the following clock is only support voltage DPM, change attribute to RO:
1. pp_dpm_sclk
2. pp_dpm_mclk
3. pp_dpm_fclk

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: change smu msg's attribute to allow working under sriov

the following message is allowed in sriov mode:
1. GetEnabledSmuFeaturesLow
2. GetEnabledSmuFeaturesHigh

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: change return value in aldebaran_get_power_limit()

v1:
1. change return value to avoid smu driver probe fails when FEATURE_PPT is
not enabled.
2. if FEATURE_PPT is not enabled, set power limit value to 0.

v2:
instead dev_err with dev_warn

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: skip to load smu microcode on sriov for aldebaran

v1:
1. skip to load smu firmware in sriov mode for aldebaran chip
2. using vbios pptable if in sriov mode.

v2:
clean up smu driver code in sriov code path

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct DPM_XGMI/VCN_DPM feature name

the following feature is wrong, it will cause sysnode of pp_features show error:
1. DPM_XGMI
2. VCN_DPM

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu embed hw_fence into amdgpu_job

Why: Previously hw fence is alloced separately with job.
It caused historical lifetime issues and corner cases.
The ideal situation is to take fence to manage both job
and fence's lifetime, and simplify the design of gpu-scheduler.

How:
We propose to embed hw_fence into amdgpu_job.
1. We cover the normal job submission by this method.
2. For ib_test, and submit without a parent job keep the
legacy way to create a hw fence separately.
v2:
use AMDGPU_FENCE_FLAG_EMBED_IN_JOB_BIT to show that the fence is
embedded in a job.
v3:
remove redundant variable ring in amdgpu_job
v4:
add tdr sequence support for this feature. Add a job_run_counter to
indicate whether this job is a resubmit job.
v5
add missing handling in amdgpu_fence_enable_signaling

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Jack Zhang <Jack.Zhang7@hotmail.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-misc-next-2021-08-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.15:

UAPI Changes:

Cross-subsystem Changes:
- Add lockdep_assert(once) helpers.

Core Changes:
- Add lockdep assert to drm_is_current_master_locked.
- Fix typos in dma-buf documentation.
- Mark drm irq midlayer as legacy only.
- Fix GPF in udmabuf_create.
- Rename member to correct value in drm_edid.h

Driver Changes:
- Build fix to make nouveau build with NOUVEAU_BACKLIGHT.
- Add MI101AIT-ICP1, LTTD800480070-L6WWH-RT panels.
- Assorted fixes to bridge/it66121, anx7625.
- Add custom crtc_state to simple helpers, and use it to
  convert pll handling in mgag200 to atomic.
- Convert drivers to use offset-adjusted framebuffer bo mappings.
- Assorted small fixes and fix for a use-after-free in vmwgfx.
- Convert remaining callers of non-legacy drivers to use linux irqs directly.
- Small cleanup in ingenic.
- Small fixes to virtio and ti-sn65dsi86.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1cf2d7fc-402d-1852-574a-21cbbd2eaebf@linux.intel.com

drm/bridge: ti-sn65dsi86: Avoid creating multiple connectors

If we created our own connector because the driver does not support the
NO_CONNECTOR flag, we don't want the downstream bridge to *also* create
a connector.  And if this driver did pass the NO_CONNECTOR flag (and we
supported that mode) this would change nothing.

Fixes: 4e5763f03e10 ("drm/bridge: ti-sn65dsi86: Wrap panel with panel-bridge")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811235253.924867-2-robdclark@gmail.com

drm/edid: fix edid field name

Byte 26 in a edid struct is supposed to be "Blue and white
least-significant 2 bits", not "black and white". Rename the field
accordingly. This field is not used anywhere, so just renaming it here
for correctness.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811205818.156100-1-lucas.demarchi@intel.com

drm/virtio: set non-cross device blob uuid_state

Blob resources without the cross device flag don't have a uuid to share
with other virtio devices. When exporting such blobs, set uuid_state to
STATE_ERR so that virtgpu_virtio_get_uuid doesn't hang.

Signed-off-by: David Stevens <stevensd@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20210811040401.1264234-1-stevensd@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

udmabuf: fix general protection fault in udmabuf_create

Syzbot reported general protection fault in udmabuf_create. The problem
was in wrong error handling.

In commit 16c243e99d33 ("udmabuf: Add support for mapping hugepages (v4)")
shmem_read_mapping_page() call was replaced with find_get_page_flags(),
but find_get_page_flags() returns NULL on failure instead PTR_ERR().

Wrong error checking was causing GPF in get_page(), since passed page
was equal to NULL. Fix it by changing if (IS_ER(!hpage)) to if (!hpage)

Reported-by: syzbot+e9cd3122a37c5d6c51e8@syzkaller.appspotmail.com
Fixes: 16c243e99d33 ("udmabuf: Add support for mapping hugepages (v4)")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210811175052.21254-1-paskripkin@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Merge tag 'drm-intel-next-2021-08-10-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 changes for v5.15:

Features:
- Basic DG2 platform enabling (Matt, Animesh, Gwan-gyeong, José)
- Add PSF GV point support for display bandwidth calculation (Stan)
- Add platform release id version support (Lucas)
- Add support for forcing DSC BPP for testing (Vandita, Patnana)

Refactoring and cleanups:
- Remove CNL support completely (Lucas)
- Revid/stepping cleanup (Matt, Anusha)
- Make display stepping check upper bounds exclusive (Matt)
- Remove old GEN macros (Lucas)
- Refactor DG1 interrupt handler (Paulo)
- Refactor DMC stepping info (Anusha)

Fixes:
- Fix XELPD color capability reporting; it's not yet enabled (Uma)
- Fix DG1 memory bandwidth computation (Clint)
- Fix mux on certain HP laptops (Kai-Heng)
- Various display workarounds (José, Matt, Imre)
- Fix error state dumps wrt SFC_DONE (Matt)
- Fix DG1 and XEPLD audio power domains (Anshuman)
- Fix ADL-P and ADL-S ddi buf translation tables (Matt)
- Fix DP/HDMI modeset sequences causing issues on ADL-P (José)
- PSR2 fixes (José)
- Fix DP MST modeset with FEC on TGL+
- Fix MBUS DBOX A credits on ADL-P (José)
- Fix DP PHY test training set programming (Khaled)
- Fix dgfx pcode uncore init done wait (Badal)
- Fix DSC disable fuse check on GLK (Lucas)
- Fix shared dpll mismatch for bigjoiner secondary pipe (Manasi)
- Fix ADL-P underrun recovery (Matt)
- Fix permissions on FEC support debugfs file (Vandita)

Misc:
- Backmerge drm-next (Rodrigo)
- Bump RKL and TGL DMC firmware version (Anusha)

Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/i915_drv.h
# drivers/gpu/drm/i915/intel_device_info.h
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a6lpo1a9.fsf@intel.com

Merge tag 'drm-xilinx-dpsub-20210809' of git://linuxtv.org/pinchartl/media into drm-next

- Miscellaneous fixes in ZynqMP DPSUB driver

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YRCSRZZV1HZYPvaG@pendragon.ideasonboard.com

Merge tag 'drm-intel-gt-next-2021-08-06-1' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-next

UAPI Changes:

- Add I915_MMAP_OFFSET_FIXED

  On devices with local memory `I915_MMAP_OFFSET_FIXED` is the only valid
  type. On devices without local memory, this caching mode is invalid.

  As caching mode when specifying `I915_MMAP_OFFSET_FIXED`, WC or WB will
  be used, depending on the object placement on creation. WB will be used
  when the object can only exist in system memory, WC otherwise.

  Userspace: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11888

- Reinstate the mmap ioctl for (already released) integrated Gen12 platforms

  Rationale: Otherwise media driver breaks eg. for ADL-P. Long term goal is
  still to sunset the IOCTL even for integrated and require using mmap_offset.

- Reject caching/set_domain IOCTLs on discrete

  Expected to become immutable property of the BO

- Disallow changing context parameters after first use on Gen12 and earlier
- Require setting context parameters at creation on platforms after Gen12

  Rationale (for both): Allow less dynamic changes to the context to simplify
  the implementation and avoid user shooting theirselves in the foot.

- Drop I915_CONTEXT_PARAM_RINGSIZE

  Userspace PR for compute-driver has not been merged

- Drop I915_CONTEXT_PARAM_NO_ZEROMAP

  Userspace PR for libdrm / Beignet was never landed

- Drop CONTEXT_CLONE API

  Userspace PR for Mesa was never landed

- Drop getparam support for I915_CONTEXT_PARAM_ENGINES

  Only existed for symmetry wrt. setparam, never used.

- Disallow bonding of virtual engines

  Drop the prep work, no hardware has been released needing it.

- (Implicit) Disable gpu relocations

  Media userspace was the last userspace to still use them. They
  have converted so performance can be regained with an update.

Core Changes:

- Merge topic branch 'topic/i915-ttm-2021-06-11' (from Maarten)
- Merge topic branch 'topic/revid_steppings' (from Matt R)
- Merge topic branch 'topic/xehp-dg2-definitions-2021-07-21' (from Matt R)
- Backmerges drm-next (Rodrigo)

Driver Changes:

- Initial workarounds for ADL-P (Clint)
- Preliminary code for XeHP/DG2 (Stuart, Umesh, Matt R, Prathap, Ram,
  Venkata, Akeem, Tvrtko, John, Lucas)
- Fix ADL-S DMA mask size to 39 bits (Tejas)
- Remove code for CNL (Lucas)
- Add ADL-P GuC/HuC firmwares (John)
- Update HuC to 7.9.3 for TGL/ADL-S/RKL (John)
- Fix -EDEADLK handling regression (Ville)
- Implement Wa_1508744258 for DG1 and Gen12 iGFX (Jose)
- Extend Wa_1406941453 to ADL-S (Jose)
- Drop unnecessary workarounds per stepping for SKL/BXT/ICL (Matt R)
- Use fuse info to enable SFC on Gen12 (Venkata)
- Unconditionally flush the pages on acquire on EHL/JSL (Matt A)
- Probe existence of backing struct pages upon userptr creation (Chris, Matt A)

- Add an intermediate GEM proto-context to delay real context creation (Jason)
- Implement SINGLE_TIMELINE with a syncobj (Jason)
- Set the watchdog timeout directly in intel_context_set_gem (Jason)
- Disallow userspace from creating contexts with too many engines (Jason)
- Revert "drm/i915/gem: Asynchronous cmdparser" (Jason)
- Revert "drm/i915: Propagate errors on awaiting already signaled fences" (Jason)
- Revert "drm/i915: Skip over MI_NOOP when parsing" (Jason)
- Revert "drm/i915: Shrink the GEM kmem_caches upon idling" (Daniel)
- Always let TTM handle object migration (Jason)
- Correct the locking and pin pattern for dma-buf (Thomas H, Michael R, Jason)
- Migrate to system at dma-buf attach time (Thomas, Michael R)

- MAJOR refactoring of the GuC backend code to allow for enabling on Gen11+
  (Matt B, John, Michal Wa., Fernando, Daniele, Vinay)
- Update GuC firmware interface to v62.0.0 (John, Michal Wa., Matt B)
- Add GuCRC feature to hand over the control of HW RC6 to the GuC on
  Gen12+ when GuC submission is enabled (Vinay, Sujaritha, Daniele,
  John, Tvrtko)
- Use the correct IRQ during resume and eliminate DRM IRQ midlayer (Thomas Z)
- Add pipelined page migration and clearing (Chris, Thomas H)
- Use TTM for system memory on discrete (Thomas H)
- Implement object migration for display vs. dma-buf (Thomas H)
- Perform execbuffer object locking as a separate step (Thomas H)
- Add support for explicit L3BANK steering (Matt, Daniele)
- Remove duplicated call to ops->pread (Daniel)
- Fix pagefault disabling in the first execbuf slowpath (Daniel)
- Simplify userptr locking (Thomas H)
- Improvements to the GuC CTB code (Matt B, John)
- Make GT workaround upper bounds exclusive (Matt R)
- Check for nomodeset in i915_init() first (Daniel)
- Delete now unused gpu reloc code (Daniel)

- Document RFC plans for GuC submission, DRM scheduler and new parallel
  submit uAPI (Matt B)
- Reintroduce buddy allocator this time with TTM (Matt A)
- Support forcing page size with LMEM (Matt A)
- Add i915_sched_engine to abstract a submission queue between backends (Matt B)
- Use accelerated move in TTM (Ram)
- Fix memory leaks from TTM backend (Thomas H)
- Introduce WW transaction helper (Thomas H)
- Improve debug Kconfig texts a bit (Daniel)
- Unify user object creation code (Jason)
- Use a table for i915_init/exit (Jason)
- Move slabs to module init/exit (Daniel)
- Remove now unused i915_globals (Daniel)
- Extract i915_module.c (Daniel)

- Consistently use adl-p/adl-s in WA comments (Jose)
- Finish INTEL_GEN and friends conversion (Lucas)
- Correct variable/function namings (Lucas)
- Code checker fixes (Wan, Matt A)
- Tracepoint improvements (Matt B)
- Kerneldoc improvements (Tvrtko, Jason, Matt A, Maarten)
- Selftest improvements (Chris, Matt A, Tejas, Thomas H, John, Matt B,
  Rahul, Vinay)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YQ0JmYiXhGskNcrI@jlahtine-mobl.ger.corp.intel.com

drm/display: fix possible null-pointer dereference in dcn10_set_clock()

The variable dc->clk_mgr is checked in:
  if (dc->clk_mgr && dc->clk_mgr->funcs->get_clock)

This indicates dc->clk_mgr can be NULL.
However, it is dereferenced in:
    if (!dc->clk_mgr->funcs->get_clock)

To fix this null-pointer dereference, check dc->clk_mgr and the function
pointer dc->clk_mgr->funcs->get_clock earlier, and return if one of them
is NULL.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port()

The variable val is declared without initialization, and its address is
passed to amdgpu_i2c_get_byte(). In this function, the value of val is
accessed in:
  DRM_DEBUG("i2c 0x%02x 0x%02x read failed\n",
       addr, *val);

Also, when amdgpu_i2c_get_byte() returns, val may remain uninitialized,
but it is accessed in:
  val &= ~amdgpu_connector->router.ddc_mux_control_pin;

To fix this possible uninitialized-variable access, initialize val to 0 in
amdgpu_i2c_router_select_ddc_port().

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CWSR with software scheduler

This patch adds support to program trap handler settings
when loading driver with software scheduler (sched_policy=2).

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Suggested-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: AIP mGPUs best prefetch location for xnack on

For xnack on, if range ACCESS or ACCESS_IN_PLACE (AIP) by single GPU, or
range is ACCESS_IN_PLACE by mGPUs and all mGPUs connection on XGMI same
hive, the best prefetch location is prefetch_loc GPU. Otherwise, the best
prefetch location is always CPU because GPU does not have coherent
mapping VRAM of other GPUs even with large-BAR PCIe connection.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: graceful exit on restore fan mode failure (v2)

Attempt od settings restore and disable restore flag on restore fan mode
failure.

v2: Update fan mode to auto and fan speed to zero (Lijo)

Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: restore fan_mode AMD_FAN_CTRL_NONE on resume (v2)

Adds missing edge case to smu_restore_dpm_user_profile.

v2: Don't restore fan mode auto (Lijo)

Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/msi/mdp4: populate priv->kms in mdp4_kms_init

Without this fix boot throws NULL ptr exception at msm_dsi_manager_setup_encoder
on devices like Nexus 7 2013 (MDP4 v4.4).

Fixes: 03436e3ec69c ("drm/msm/dsi: Move setup_encoder to modeset_init")

Cc: <stable@vger.kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210811170631.39296-1-david@ixit.cz
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/ingenic: Use standard drm_atomic_helper_commit_tail

By making the CRTC's .vblank_enable() function return an error when it
is known that the hardware won't deliver a VBLANK, we can drop the
ingenic_drm_atomic_helper_commit_tail() function and use the standard
drm_atomic_helper_commit_tail() function instead.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-4-paul@crapouillou.net

drm/ingenic: Remove dead code

The priv->ipu_plane would get a different value further down the code,
without the first assigned value being read first; so the first
assignation can be dropped.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-2-paul@crapouillou.net

Merge tag 'amd-drm-next-5.15-2021-08-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.15-2021-08-06:

amdgpu:
- Aldebaran fixes
- Powergating fix for Renoir
- Switch virtual DCE over to vkms based atomic modesetting
- Misc typo fixes
- PSP handling cleanups
- DC FP cleanups
- RAS fixes
- Wave debug improvements
- Freesync fix
- BACO/BOCO fixes
- Misc fixes

amdkfd:
- Expose gfx version in sysfs
- Aldebaran fixes

radeon:
- Coding style fix
- Typo fixes
- Pageflip fix

UAPI:
- amdkfd: SVM address range query
  Proposed userspace: https://github.com/RadeonOpenCompute/ROCR-Runtime/tree/memory_model_queries

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210806205248.3864-1-alexander.deucher@amd.com

Merge tag 'bus_remove_return_void-5.15' of git://git./linux/kernel/git/gregkh/driver-core into drm-next

Bus: Make remove callback return void tag

Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fixed up merge conflict in drm]
From:   Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/YPkwQwf0dUKnGA7L@kroah.com

drm/msm/dsi: add continuous clock support for 7nm PHY

Unlike previous generations, 7nm PHYs are required to collaborate with
the host for continuos clock mode. Add changes neccessary to enable
continuous clock mode in the 7nm DSI PHYs.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210805170817.3337665-1-dmitry.baryshkov@linaro.org
[Fix merge conflict, and $description typo]
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: add drm debug logs to dp_pm_resume/suspend

Changes in V2:
-- correct Fixes text
-- drop commit text

Fixes: 601f0479c583 ("drm/msm/dp: add logs across DP driver for ease of debugging")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628609362-2109-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: do not end dp link training until video is ready

Initialize both pre-emphasis and voltage swing level to 0 before
start link training and do not end link training until video is
ready to reduce the period between end of link training and video
start to meet Link Layer CTS requirement.  Some dongle main link
symbol may become unlocked again if host did not end link training
soon enough after completion of link training 2. Host have to re
train main link if loss of symbol locked detected before end link
training so that the coming video stream can be transmitted to sink
properly. This fixes Link Layer CTS cases 4.3.2.1, 4.3.2.2, 4.3.2.3
and 4.3.2.4.

Changes in v3:
-- merge retrain link if loss of symbol locked happen into this patch
-- replace dp_ctrl_loss_symbol_lock() with dp_ctrl_channel_eq_ok()

Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628196295-7382-7-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: return correct edid checksum after corrupted edid checksum read

Response with correct edid checksum saved at connector after corrupted edid
checksum read. This fixes Link Layer CTS cases 4.2.2.3, 4.2.2.6.

Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628196295-7382-6-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: replug event is converted into an unplug followed by an plug events

Remove special handling of replug interrupt and instead treat replug event
as a sequential unplug followed by a plugin event. This is needed to meet
the requirements of DP Link Layer CTS test case 4.2.1.3.

Changes in V2:
-- add fixes statement

Changes in V3:
-- delete EV_HPD_REPLUG_INT

Fixes: f21c8a276c2d ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly")

Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628196295-7382-5-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: reset aux controller after dp_aux_cmd_fifo_tx() failed.

Aux hardware calibration sequence requires resetting the aux controller
in order for the new setting to take effect. However resetting the AUX
controller will also clear HPD interrupt status which may accidentally
cause pending unplug interrupt to get lost. Therefore reset aux
controller only when link is in connection state when dp_aux_cmd_fifo_tx()
fail. This fixes Link Layer CTS cases 4.2.1.1 and 4.2.1.2.

Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628196295-7382-4-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: reduce link rate if failed at link training 1

Reduce link rate and re start link training if link training 1
failed due to loss of clock recovery done to fix Link Layer
CTS case 4.3.1.7.  Also only update voltage and pre-emphasis
swing level after link training started to fix Link Layer CTS
case 4.3.1.6.

Changes in V2:
-- replaced cr_status with link_status[DP_LINK_STATUS_SIZE]
-- replaced dp_ctrl_any_lane_cr_done() with dp_ctrl_colco_recovery_any_ok()
-- replaced dp_ctrl_any_ane_cr_lose() with !drm_dp_clock_recovery_ok()

Changes in V3:
-- return failed if lane_count <= 1

Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628196295-7382-3-git-send-email-khsieh@codeaurora.org
[remove unused cr_status variable]
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run

DP cable should always connect to DPU during the entire PHY compliance
testing run. Since DP PHY compliance test is executed at irq_hpd event
context, dp_ctrl_off_link_stream() should be used instead of dp_ctrl_off().
dp_ctrl_off() is used for unplug event which is triggered when DP cable is
dis connected.

Changes in V2:
-- add fixes statement

Fixes: f21c8a276c2d ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly")

Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628196295-7382-2-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dsi: Fix some reference counted resource leaks

'of_find_device_by_node()' takes a reference that must be released when
not needed anymore.
This is expected to be done in 'dsi_destroy()'.

However, there are 2 issues in 'dsi_get_phy()'.

First, if 'of_find_device_by_node()' succeeds but 'platform_get_drvdata()'
returns NULL, 'msm_dsi->phy_dev' will still be NULL, and the reference
won't be released in 'dsi_destroy()'.

Secondly, as 'of_find_device_by_node()' already takes a reference, there is
no need for an additional 'get_device()'.

Move the assignment to 'msm_dsi->phy_dev' a few lines above and remove the
unneeded 'get_device()' to solve both issues.

Fixes: ec31abf6684e ("drm/msm/dsi: Separate PHY to another platform device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f15bc57648a00e7c99f943903468a04639d50596.1628241097.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Rework SQE version check

This check is really about which SQE firmware, rather than which GPU.
Rework to match minimum version based on firmware name, so it doesn't
need to be updated when adding additional GPUs using the same fw.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210807163019.379003-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Add adreno_is_a640_family()

Combine adreno_is_a640() and adreno_is_a680().

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210807163019.379003-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm: IRQ midlayer is now legacy

Hide the DRM midlayer behind CONFIG_DRM_LEGACY, make functions use
the prefix drm_legacy_, and move declarations to drm_legacy.h.
In struct drm_device, move the fields irq and irq_enabled behind
CONFIG_DRM_LEGACY.

All callers have been updated.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-15-tzimmermann@suse.de

drm: Remove unused devm_drm_irq_install()

DRM IRQ helpers will become legacy. The function devm_drm_irq_install()
is unused and won't be required later.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-14-tzimmermann@suse.de

drm/vc4: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-13-tzimmermann@suse.de

drm/tilcdc: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.

For most drivers, only the DRM IRQ helpers use irq_enabled from
struct drm_device. Tilcdc also uses irq_enabled to make its error
rollback work correctly. As the field will become legacy, duplicated
the state in the driver's local private structure.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-12-tzimmermann@suse.de

drm/tidss: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-11-tzimmermann@suse.de

drm/radeon: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-10-tzimmermann@suse.de

drm/mxsfb: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-9-tzimmermann@suse.de

drm/msm: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Acked-by: Rob Clark <robdclark@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-8-tzimmermann@suse.de

drm/kmb: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-7-tzimmermann@suse.de

drm/gma500: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it. DRM IRQ callbacks are now being called
directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-6-tzimmermann@suse.de

drm/fsl-dcu: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it. DRM IRQ callbacks are now being called
directly or inlined.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-5-tzimmermann@suse.de

drm/atmel-hlcdc: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it. DRM IRQ callbacks are now being called
directly or inlined.

v2:
* use managed release via devm_request_irq() (Sam)
* drop extra test for irq != IRQ_NOTCONNECTED (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Dan Sneddon <Dan.Sneddon@microchip.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-4-tzimmermann@suse.de

drm/arm/hdlcd: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.

v2:
* name struct drm_device variables 'drm' (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-3-tzimmermann@suse.de

drm/amdgpu: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

The interrupt number returned by pci_msi_vector() is now stored
in struct amdgpu_irq. Calls to pci_msi_vector() can fail and return
a negative errno code. Abort initlaizaton in thi case. The DRM IRQ
midlayer does not handle this correctly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-2-tzimmermann@suse.de

amdgpu/pm: Replace amdgpu_pm usage of sprintf with sysfs_emit

 replacing printfs with sysfs_emit

=== Test ===
AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}
LOGFILE=pp_printf.test.log

lspci -nn | grep "VGA\|Display"  > $LOGFILE
FILES="pwm1_enable
pwm1_min
pwm1_max
pwm1
fan1_input
fan1_target
fan1_enable
power1_cap_min "

for f in $FILES
do
  echo === $f === >> $LOGFILE
  cat $HWMON_DIR/device/$f >> $LOGFILE
done
cat $LOGFILE

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Replace hwmgr smu usage of sprintf with sysfs_emit

 replacing printfs with sysfs_emit
 minor smu7 change to remove compiler warning comparison of int and uint32_t
 minor smu8 change to remove compiler warning comparison of int and uint32_t

=== Test ===
AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}
LOGFILE=pp_printf.test.log

lspci -nn | grep "VGA\|Display"  > $LOGFILE
FILES="pp_dpm_sclk
pp_power_profile_mode "

for f in $FILES
do
  echo === $f === >> $LOGFILE
  cat $HWMON_DIR/device/$f >> $LOGFILE
done
cat $LOGFILE

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Replace vega12,20 usage of sprintf with sysfs_emit

=== Test ===
AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}
LOGFILE=pp_printf.test.log

lspci -nn | grep "VGA\|Display"  > $LOGFILE
FILES="pp_dpm_sclk
pp_features
pp_power_profile_mode "

for f in $FILES
do
  echo === $f === >> $LOGFILE
  cat $HWMON_DIR/device/$f >> $LOGFILE
done
cat $LOGFILE

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Replace vega10 usage of sprintf with sysfs_emit

 initial modification of files
  vega10_hwmgr.c

=== Test ===
AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}
LOGFILE=pp_printf.test.log

lspci -nn | grep "VGA\|Display"  > $LOGFILE
FILES="pp_dpm_sclk
pp_features
pp_power_profile_mode "

for f in $FILES
do
  echo === $f === >> $LOGFILE
  cat $HWMON_DIR/device/$f >> $LOGFILE
done
cat $LOGFILE

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Replace smu12/13 usage of sprintf with sysfs_emit

 initial modification of files
  renoir_ppt.c
  aldebaran_ppt.c
  yellow_carp_ppt.c

=== Test ===
AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}
LOGFILE=pp_printf.test.log

lspci -nn | grep "VGA\|Display"  > $LOGFILE
FILES="pp_dpm_sclk
pp_power_profile_mode "

for f in $FILES
do
  echo === $f === >> $LOGFILE
  cat $HWMON_DIR/device/$f >> $LOGFILE
done
cat $LOGFILE

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Replace smu11 usage of sprintf with sysfs_emit

 modification of smu11 files
  arcturus_ppt.c
  sienna_cichlid_ppt.c
  vangogh_ppt.c

=== Test ===
AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}
LOGFILE=pp_printf.test.log

lspci -nn | grep "VGA\|Display"  > $LOGFILE
FILES="pp_dpm_sclk
pp_power_profile_mode "

for f in $FILES
do
  echo === $f === >> $LOGFILE
  cat $HWMON_DIR/device/$f >> $LOGFILE
done
cat $LOGFILE

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Replace navi10 usage of sprintf with sysfs_emit

 initial modification of files
  smu_cmn.c
  navi10_ppt.c

=== Test ===
AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}
LOGFILE=pp_printf.test.log

lspci -nn | grep "VGA\|Display"  > $LOGFILE
FILES="pp_dpm_sclk
pp_sclk_od
pp_mclk_od
pp_dpm_pcie
pp_od_clk_voltage
pp_power_profile_mode "

for f in $FILES
do
  echo === $f === >> $LOGFILE
  cat $HWMON_DIR/device/$f >> $LOGFILE
done
cat $LOGFILE

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: handle VCN instances when harvesting (v2)

There may be multiple instances and only one is harvested.

v2: fix typo in commit message

Fixes: 83a0b8639185 ("drm/amdgpu: add judgement when add ip blocks (v2)")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1673
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>