- const: atmel,sama5d4
- const: atmel,sama5
+ - items:
+ - const: microchip,sama7g5ek # SAMA7G5 Evaluation Kit
+ - const: microchip,sama7g5
+ - const: microchip,sama7
+
- items:
- enum:
- atmel,sams70j19
"atmel,at91sam9260-sdramc",
"atmel,at91sam9g45-ddramc",
"atmel,sama5d3-ddramc",
- "microchip,sam9x60-ddramc"
+ "microchip,sam9x60-ddramc",
+ "microchip,sama7g5-uddrc"
- reg: Should contain registers location and length
Examples:
reg = <0xffffe800 0x200>;
};
+RAMC PHY Controller required properties:
+- compatible: Should be "microchip,sama7g5-ddr3phy", "syscon"
+- reg: Should contain registers location and length
+
+Example:
+
+ ddr3phy: ddr3phy@e3804000 {
+ compatible = "microchip,sama7g5-ddr3phy", "syscon";
+ reg = <0xe3804000 0x1000>;
+};
+
SHDWC Shutdown Controller
required properties:
- prt,prti6q # Protonic PRTI6Q board
- prt,prtwd2 # Protonic WD2 board
- rex,imx6q-rex-pro # Rex Pro i.MX6 Quad Board
+ - skov,imx6q-skov-revc-lt2 # SKOV IMX6 CPU QuadCore lt2
+ - skov,imx6q-skov-revc-lt6 # SKOV IMX6 CPU QuadCore lt6
+ - skov,imx6q-skov-reve-mi1010ait-1cp1 # SKOV IMX6 CPU QuadCore mi1010ait-1cp1
- solidrun,cubox-i/q # SolidRun Cubox-i Dual/Quad
- solidrun,hummingboard/q
- solidrun,hummingboard2/q
+ - solidrun,solidsense/q # SolidRun SolidSense Dual/Quad
- tbs,imx6q-tbs2910 # TBS2910 Matrix ARM mini PC
- technexion,imx6q-pico-dwarf # TechNexion i.MX6Q Pico-Dwarf
- technexion,imx6q-pico-hobbit # TechNexion i.MX6Q Pico-Hobbit
- prt,prtvt7 # Protonic VT7 board
- rex,imx6dl-rex-basic # Rex Basic i.MX6 Dual Lite Board
- riot,imx6s-riotboard # RIoTboard i.MX6S
+ - skov,imx6dl-skov-revc-lt2 # SKOV IMX6 CPU SoloCore lt2
+ - skov,imx6dl-skov-revc-lt6 # SKOV IMX6 CPU SoloCore lt6
- solidrun,cubox-i/dl # SolidRun Cubox-i Solo/DualLite
- solidrun,hummingboard/dl
- solidrun,hummingboard2/dl # SolidRun HummingBoard2 Solo/DualLite
+ - solidrun,solidsense/dl # SolidRun SolidSense Solo/DualLite
- technexion,imx6dl-pico-dwarf # TechNexion i.MX6DL Pico-Dwarf
- technexion,imx6dl-pico-hobbit # TechNexion i.MX6DL Pico-Hobbit
- technexion,imx6dl-pico-nymph # TechNexion i.MX6DL Pico-Nymph
- const: dfi,fs700e-m60
- const: fsl,imx6dl
+ - description: i.MX6DL DHCOM PicoITX Board
+ items:
+ - const: dh,imx6dl-dhcom-picoitx
+ - const: dh,imx6dl-dhcom-som
+ - const: fsl,imx6dl
+
- description: i.MX6DL Gateworks Ventana Boards
items:
- enum:
- const: toradex,colibri_imx6dl # Colibri iMX6 Module
- const: fsl,imx6dl
+ - description: i.MX6S DHCOM DRC02 Board
+ items:
+ - const: dh,imx6s-dhcom-drc02
+ - const: dh,imx6s-dhcom-som
+ - const: fsl,imx6dl
+
- description: i.MX6SL based Boards
items:
- enum:
- gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit
- gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit
- gw,imx8mm-gw7901 # i.MX8MM Gateworks Board
+ - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board
- kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM
- variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module
- const: fsl,imx8mm
- beacon,imx8mn-beacon-kit # i.MX8MN Beacon Development Kit
- fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board
- fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board
+ - gw,imx8mn-gw7902 # i.MX8MM Gateworks Board
- const: fsl,imx8mn
- description: Variscite VAR-SOM-MX8MN based boards
items:
- enum:
- boundary,imx8mq-nitrogen8m # i.MX8MQ NITROGEN Board
+ - boundary,imx8mq-nitrogen8m-som # i.MX8MQ NITROGEN SoM
- einfochips,imx8mq-thor96 # i.MX8MQ Thor96 Board
- fsl,imx8mq-evk # i.MX8MQ EVK Board
- google,imx8mq-phanbell # Google Coral Edge TPU
- kontron,pitx-imx8m # Kontron pITX-imx8m Board
+ - mntre,reform2 # MNT Reform2 Laptop
- purism,librem5-devkit # Purism Librem5 devkit
- solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
- technexion,pico-pi-imx8m # TechNexion PICO-PI-8M evk
- fsl,s32v234-evb # S32V234-EVB2 Customer Evaluation Board
- const: fsl,s32v234
+ - description: Traverse LS1088A based Boards
+ items:
+ - enum:
+ - traverse,ten64 # Ten64 Networking Appliance / Board
+ - const: fsl,ls1088a
+
additionalProperties: true
...
ipq6018
ipq8074
mdm9615
+ msm8226
msm8916
msm8974
msm8992
- qcom,apq8084-sbc
- const: qcom,apq8084
+ - items:
+ - enum:
+ - samsung,s3ve3g
+ - const: qcom,msm8226
+
- items:
- enum:
- qcom,msm8960-cdp
- const: qcom,msm8974
- items:
+ - enum:
+ - alcatel,idol347
- const: qcom,msm8916-mtp/1
- const: qcom,msm8916-mtp
- const: qcom,msm8916
- items:
- enum:
- qcom,sc7280-idp
+ - qcom,sc7280-idp2
+ - google,piglin
- google,senor
- const: qcom,sc7280
- const: renesas,r8a77961
- description: Kingfisher (SBEV-RCAR-KF-M03)
- items:
- - const: shimafuji,kingfisher
- - enum:
- - renesas,h3ulcb
- - renesas,m3ulcb
- - renesas,m3nulcb
- - enum:
- - renesas,r8a7795
- - renesas,r8a7796
- - renesas,r8a77961
- - renesas,r8a77965
+ oneOf:
+ - items:
+ - const: shimafuji,kingfisher
+ - enum:
+ - renesas,h3ulcb
+ - renesas,m3ulcb
+ - renesas,m3nulcb
+ - enum:
+ - renesas,r8a7795
+ - renesas,r8a7796
+ - renesas,r8a77961
+ - renesas,r8a77965
+ - items:
+ - const: shimafuji,kingfisher
+ - enum:
+ - renesas,h3ulcb
+ - renesas,m3ulcb
+ - enum:
+ - renesas,r8a779m1
+ - renesas,r8a779m3
+ - enum:
+ - renesas,r8a7795
+ - renesas,r8a77961
- description: R-Car M3-N (R8A77965)
items:
- const: renesas,falcon-cpu
- const: renesas,r8a779a0
+ - description: R-Car H3e-2G (R8A779M1)
+ items:
+ - enum:
+ - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier)
+ - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+ - const: renesas,r8a779m1
+ - const: renesas,r8a7795
+
+ - description: R-Car M3e-2G (R8A779M3)
+ items:
+ - enum:
+ - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro)
+ - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+ - const: renesas,r8a779m3
+ - const: renesas,r8a77961
+
- description: RZ/N1D (R9A06G032)
items:
- enum:
- items:
- enum:
- nvidia,p2771-0000
+ - nvidia,p3509-0000+p3636-0001
- const: nvidia,tegra186
- items:
- enum:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/aspeed,sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SGPIO controller
+
+maintainers:
+ - Andrew Jeffery <andrew@aj.id.au>
+
+description:
+ This SGPIO controller is for ASPEED AST2400, AST2500 and AST2600 SoC,
+ AST2600 have two sgpio master one with 128 pins another one with 80 pins,
+ AST2500/AST2400 have one sgpio master with 80 pins. Each of the Serial
+ GPIO pins can be programmed to support the following options
+ - Support interrupt option for each input port and various interrupt
+ sensitivity option (level-high, level-low, edge-high, edge-low)
+ - Support reset tolerance option for each output port
+ - Directly connected to APB bus and its shift clock is from APB bus clock
+ divided by a programmable value.
+ - Co-work with external signal-chained TTL components (74LV165/74LV595)
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-sgpio
+ - aspeed,ast2500-sgpio
+ - aspeed,ast2600-sgpiom
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ clocks:
+ maxItems: 1
+
+ ngpios: true
+
+ bus-frequency: true
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - interrupts
+ - interrupt-controller
+ - ngpios
+ - clocks
+ - bus-frequency
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+ sgpio: sgpio@1e780200 {
+ #gpio-cells = <2>;
+ compatible = "aspeed,ast2500-sgpio";
+ gpio-controller;
+ interrupts = <40>;
+ reg = <0x1e780200 0x0100>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ interrupt-controller;
+ ngpios = <80>;
+ bus-frequency = <12000000>;
+ };
+++ /dev/null
-Aspeed SGPIO controller Device Tree Bindings
---------------------------------------------
-
-This SGPIO controller is for ASPEED AST2500 SoC, it supports up to 80 full
-featured Serial GPIOs. Each of the Serial GPIO pins can be programmed to
-support the following options:
-- Support interrupt option for each input port and various interrupt
- sensitivity option (level-high, level-low, edge-high, edge-low)
-- Support reset tolerance option for each output port
-- Directly connected to APB bus and its shift clock is from APB bus clock
- divided by a programmable value.
-- Co-work with external signal-chained TTL components (74LV165/74LV595)
-
-Required properties:
-
-- compatible : Should be one of
- "aspeed,ast2400-sgpio", "aspeed,ast2500-sgpio"
-- #gpio-cells : Should be 2, see gpio.txt
-- reg : Address and length of the register set for the device
-- gpio-controller : Marks the device node as a GPIO controller
-- interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt
-- interrupt-controller : Mark the GPIO controller as an interrupt-controller
-- ngpios : number of *hardware* GPIO lines, see gpio.txt. This will expose
- 2 software GPIOs per hardware GPIO: one for hardware input, one for hardware
- output. Up to 80 pins, must be a multiple of 8.
-- clocks : A phandle to the APB clock for SGPM clock division
-- bus-frequency : SGPM CLK frequency
-
-The sgpio and interrupt properties are further described in their respective
-bindings documentation:
-
-- Documentation/devicetree/bindings/gpio/gpio.txt
-- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
- Example:
- sgpio: sgpio@1e780200 {
- #gpio-cells = <2>;
- compatible = "aspeed,ast2500-sgpio";
- gpio-controller;
- interrupts = <40>;
- reg = <0x1e780200 0x0100>;
- clocks = <&syscon ASPEED_CLK_APB>;
- interrupt-controller;
- ngpios = <8>;
- bus-frequency = <12000000>;
- };
interrupts:
items:
- - description: Transmit End Interrupt (TEI)
- - description: Receive Data Full Interrupt (RI)
- - description: Transmit Data Empty Interrupt (TI)
- - description: Stop Condition Detection Interrupt (SPI)
- - description: Start Condition Detection Interrupt (STI)
- - description: NACK Reception Interrupt (NAKI)
- - description: Arbitration-Lost Interrupt (ALI)
- - description: Timeout Interrupt (TMOI)
+ - description: Transmit End Interrupt
+ - description: Receive Data Full Interrupt
+ - description: Transmit Data Empty Interrupt
+ - description: Stop Condition Detection Interrupt
+ - description: Start Condition Detection Interrupt
+ - description: NACK Reception Interrupt
+ - description: Arbitration-Lost Interrupt
+ - description: Timeout Interrupt
+
+ interrupt-names:
+ items:
+ - const: tei
+ - const: ri
+ - const: ti
+ - const: spi
+ - const: sti
+ - const: naki
+ - const: ali
+ - const: tmoi
clock-frequency:
description:
- compatible
- reg
- interrupts
+ - interrupt-names
- clocks
- clock-frequency
- power-domains
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
+ "tmoi";
clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
start_offset: the start offset of register address that GCE can access.
size: the total size of register address that GCE can access.
+Optional properties for a client mutex node:
+- mediatek,gce-events: GCE events used by clients. The event numbers are
+ defined in 'dt-bindings/gce/<chip>-gce.h'.
+
Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h',
'dt-binding/gce/mt8183-gce.h' or 'dt-bindings/gce/mt6779-gce.h'. Such as
sub-system ids, thread priority, event ids.
<&gce SUBSYS_1401XXXX 0x2000 0x100>;
...
};
+
+Example for a client mutex node:
+ mutex: mutex@14020000 {
+ compatible = "mediatek,mt8173-disp-mutex";
+ reg = <0 0x14020000 0 0x1000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_MUTEX_32K>;
+ mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
+ <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+ };
properties:
compatible:
- items:
- - enum:
- # JPEG decoder
- - nxp,imx8qxp-jpgdec
- # JPEG encoder
- - nxp,imx8qxp-jpgenc
+ oneOf:
+ - items:
+ enum:
+ - nxp,imx8qxp-jpgdec
+ - nxp,imx8qxp-jpgenc
+ - items:
+ - const: nxp,imx8qm-jpgdec
+ - const: nxp,imx8qxp-jpgdec
+ - items:
+ - const: nxp,imx8qm-jpgenc
+ - const: nxp,imx8qxp-jpgenc
reg:
maxItems: 1
};
jpegenc: jpegenc@58450000 {
- compatible = "nxp,imx8qxp-jpgenc";
+ compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
reg = <0x58450000 0x00050000 >;
interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
- qcom,sc7180-tsens
- qcom,sc7280-tsens
- qcom,sc8180x-tsens
+ - qcom,sdm630-tsens
- qcom,sdm845-tsens
- qcom,sm8150-tsens
- qcom,sm8250-tsens
description: MiraMEMS Sensing Technology Co., Ltd.
"^mitsubishi,.*":
description: Mitsubishi Electric Corporation
+ "^mntre,.*":
+ description: MNT Research GmbH
"^modtronix,.*":
description: Modtronix Engineering
"^mosaixtech,.*":
description: Silicon Integrated Systems Corp.
"^sitronix,.*":
description: Sitronix Technology Corporation
+ "^skov,.*":
+ description: SKOV A/S
"^skyworks,.*":
description: Skyworks Solutions, Inc.
"^smartlabs,.*":
description: TPO
"^tq,.*":
description: TQ-Systems GmbH
+ "^traverse,.*":
+ description: Traverse Technologies Australia Pty Ltd
"^tronfy,.*":
description: Tronfy
"^tronsmart,.*":
at91-sama5d4_xplained.dtb \
at91-sama5d4ek.dtb \
at91-vinco.dtb
+dtb-$(CONFIG_SOC_SAMA7G5) += \
+ at91-sama7g5ek.dtb
dtb-$(CONFIG_ARCH_AXXIA) += \
axm5516-amarillo.dtb
dtb-$(CONFIG_ARCH_BCM2835) += \
integratorcp.dtb
dtb-$(CONFIG_ARCH_IXP4XX) += \
intel-ixp42x-linksys-nslu2.dtb \
+ intel-ixp42x-linksys-wrv54g.dtb \
+ intel-ixp42x-freecom-fsg-3.dtb \
intel-ixp42x-welltech-epbx100.dtb \
- intel-ixp43x-gateworks-gw2358.dtb
+ intel-ixp42x-ixdp425.dtb \
+ intel-ixp43x-kixrp435.dtb \
+ intel-ixp46x-ixdp465.dtb \
+ intel-ixp42x-adi-coyote.dtb \
+ intel-ixp42x-ixdpg425.dtb \
+ intel-ixp42x-iomega-nas100d.dtb \
+ intel-ixp42x-dlink-dsm-g600.dtb \
+ intel-ixp42x-gateworks-gw2348.dtb \
+ intel-ixp43x-gateworks-gw2358.dtb \
+ intel-ixp42x-netgear-wg302v2.dtb \
+ intel-ixp42x-arcom-vulcan.dtb
dtb-$(CONFIG_ARCH_KEYSTONE) += \
keystone-k2hk-evm.dtb \
keystone-k2l-evm.dtb \
imx6dl-cubox-i-emmc-som-v15.dtb \
imx6dl-cubox-i-som-v15.dtb \
imx6dl-dfi-fs700-m60.dtb \
+ imx6dl-dhcom-picoitx.dtb \
imx6dl-eckelmann-ci4x10.dtb \
imx6dl-emcon-avari.dtb \
imx6dl-gw51xx.dtb \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
imx6dl-savageboard.dtb \
+ imx6dl-skov-revc-lt2.dtb \
+ imx6dl-skov-revc-lt6.dtb \
+ imx6dl-solidsense.dtb \
imx6dl-ts4900.dtb \
imx6dl-ts7970.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6q-sabresd.dtb \
imx6q-savageboard.dtb \
imx6q-sbc6x.dtb \
+ imx6q-skov-revc-lt2.dtb \
+ imx6q-skov-revc-lt6.dtb \
+ imx6q-skov-reve-mi1010ait-1cp1.dtb \
+ imx6q-solidsense.dtb \
imx6q-tbs2910.dtb \
imx6q-ts4900.dtb \
imx6q-ts7970.dtb \
imx6qp-tx6qp-8137-mb7.dtb \
imx6qp-vicutp.dtb \
imx6qp-wandboard-revd1.dtb \
- imx6qp-zii-rdu2.dtb
+ imx6qp-zii-rdu2.dtb \
+ imx6s-dhcom-drc02.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sl-tolino-shine2hd.dtb \
am335x-pocketbeagle.dtb \
am335x-regor-rdk.dtb \
am335x-sancloud-bbe.dtb \
+ am335x-sancloud-bbe-lite.dtb \
am335x-shc.dtb \
am335x-sbc-t335.dtb \
am335x-sl50.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
qcom-ipq8064-ap148.dtb \
qcom-ipq8064-rb3011.dtb \
+ qcom-msm8226-samsung-s3ve3g.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-fairphone-fp2.dtb \
stih407-b2120.dtb \
stih410-b2120.dtb \
stih410-b2260.dtb \
- stih418-b2199.dtb
+ stih418-b2199.dtb \
+ stih418-b2264.dtb
dtb-$(CONFIG_ARCH_STM32) += \
stm32f429-disco.dtb \
stm32f469-disco.dtb \
ste-href520-tvk.dtb \
ste-ux500-samsung-golden.dtb \
ste-ux500-samsung-janice.dtb \
- ste-ux500-samsung-skomer.dtb
+ ste-ux500-samsung-gavini.dtb \
+ ste-ux500-samsung-codina.dtb \
+ ste-ux500-samsung-skomer.dtb \
+ ste-ux500-samsung-kyle.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ld4-ref.dtb \
uniphier-ld6b-ref.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
aspeed-bmc-bytedance-g220a.dtb \
+ aspeed-bmc-facebook-cloudripper.dtb \
aspeed-bmc-facebook-cmm.dtb \
+ aspeed-bmc-facebook-elbert.dtb \
+ aspeed-bmc-facebook-fuji.dtb \
aspeed-bmc-facebook-galaxy100.dtb \
aspeed-bmc-facebook-minipack.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-ibm-rainier-4u.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-inspur-fp5280g2.dtb \
+ aspeed-bmc-inspur-nf5280m6.dtb \
aspeed-bmc-lenovo-hr630.dtb \
aspeed-bmc-lenovo-hr855xg2.dtb \
aspeed-bmc-microsoft-olympus.dtb \
dr_mode = "host";
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy0: ethernet-phy@0 {
reg = <1>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
phy-handle = <&phy0>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
dr_mode = "host";
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
fixed-link {
speed = <100>;
full-duplex;
};
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
dr_mode = "host";
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
fixed-link {
speed = <100>;
full-duplex;
};
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
};
};
-&mac {
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
- dual_emac = <1>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "mii";
+ ti,dual-emac-pvid = <1>;
};
-&mac {
- slaves = <1>;
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
clock-names = "ext-clk", "int-clk";
};
+
+&pruss_tm {
+ status = "okay";
+};
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
*/
-#include <dt-bindings/display/tda998x.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
&ldo3_reg {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
non-removable;
};
-&am33xx_pinmux {
- nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
- >;
- };
-
- nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
- >;
- };
-
- mcasp0_pins: mcasp0_pins {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
- AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
- AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
- >;
- };
-};
-
-&lcdc {
- status = "okay";
-
- /* If you want to get 24 bit RGB and 16 BGR mode instead of
- * current 16 bit RGB and 24 BGR modes, set the propety
- * below to "crossed" and uncomment the video-ports -property
- * in tda19988 node.
- */
- blue-and-red-wiring = "straight";
-
- port {
- lcdc_0: endpoint@0 {
- remote-endpoint = <&hdmi_0>;
- };
- };
-};
-
-&i2c0 {
- tda19988: tda19988@70 {
- compatible = "nxp,tda998x";
- reg = <0x70>;
- nxp,calib-gpios = <&gpio1 25 0>;
- interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
-
- pinctrl-names = "default", "off";
- pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
- pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-
- /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
- /* video-ports = <0x234501>; */
-
- #sound-dai-cells = <0>;
- audio-ports = < TDA998x_I2S 0x03>;
-
- ports {
- port@0 {
- hdmi_0: endpoint@0 {
- remote-endpoint = <&lcdc_0>;
- };
- };
- };
- };
-};
-
&rtc {
system-power-controller;
};
-&mcasp0 {
- #sound-dai-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&mcasp0_pins>;
- status = "okay";
- op-mode = <0>; /* MCASP_IIS_MODE */
- tdm-slots = <2>;
- serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
- 0 0 1 0
- >;
- tx-num-evt = <32>;
- rx-num-evt = <32>;
-};
-
/ {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
-
- clk_mcasp0_fixed: clk_mcasp0_fixed {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24576000>;
- };
-
- clk_mcasp0: clk_mcasp0 {
- #clock-cells = <0>;
- compatible = "gpio-gate-clock";
- clocks = <&clk_mcasp0_fixed>;
- enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "TI BeagleBone Black";
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&dailink0_master>;
- simple-audio-card,frame-master = <&dailink0_master>;
-
- dailink0_master: simple-audio-card,cpu {
- sound-dai = <&mcasp0>;
- clocks = <&clk_mcasp0>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&tda19988>;
- };
- };
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&am33xx_pinmux {
+ nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+ >;
+ };
+
+ mcasp0_pins: mcasp0_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+ >;
+ };
+};
+
+&lcdc {
+ status = "okay";
+
+ /* If you want to get 24 bit RGB and 16 BGR mode instead of
+ * current 16 bit RGB and 24 BGR modes, set the propety
+ * below to "crossed" and uncomment the video-ports -property
+ * in tda19988 node.
+ */
+ blue-and-red-wiring = "straight";
+
+ port {
+ lcdc_0: endpoint@0 {
+ remote-endpoint = <&hdmi_0>;
+ };
+ };
+};
+
+&i2c0 {
+ tda19988: tda19988@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ nxp,calib-gpios = <&gpio1 25 0>;
+ interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default", "off";
+ pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+ pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+ /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+ /* video-ports = <0x234501>; */
+
+ #sound-dai-cells = <0>;
+ audio-ports = < TDA998x_I2S 0x03>;
+
+ ports {
+ port@0 {
+ hdmi_0: endpoint@0 {
+ remote-endpoint = <&lcdc_0>;
+ };
+ };
+ };
+ };
+};
+
+&mcasp0 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp0_pins>;
+ status = "okay";
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+/ {
+ clk_mcasp0_fixed: clk_mcasp0_fixed {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24576000>;
+ };
+
+ clk_mcasp0: clk_mcasp0 {
+ #clock-cells = <0>;
+ compatible = "gpio-gate-clock";
+ clocks = <&clk_mcasp0_fixed>;
+ enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "TI BeagleBone Black";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
+
+ dailink0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ clocks = <&clk_mcasp0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tda19988>;
+ };
+ };
+};
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
#include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
};
};
-&mac {
+&mac_sw {
status = "disabled";
};
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
#include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
/ {
model = "TI AM335x BeagleBone Black";
status = "okay";
};
+&gpio0 {
+ gpio-line-names =
+ "UART3_CTS", /* M17 */
+ "UART3_RTS", /* M18 */
+ "UART2_RX", /* A17 */
+ "UART2_TX", /* B17 */
+ "I2C1_SDA", /* B16 */
+ "I2C1_SCL", /* A16 */
+ "MMC0_CD", /* C15 */
+ "SPI1_SS2", /* C18 */
+ "EQEP_1A", /* V2 */
+ "EQEP_1B", /* V3 */
+ "MDIR_2B", /* V4 */
+ "BATT_LED_2", /* T5 */
+ "I2C2_SDA", /* D18 */
+ "I2C2_SCL", /* D17 */
+ "UART1_RX", /* D16 */
+ "UART1_TX", /* D15 */
+ "MMC2_DAT1", /* J18 */
+ "MMC2_DAT2", /* K15 */
+ "NC", /* F16 */
+ "WIFI_LED", /* A15 */
+ "MOT_STBY", /* D14 */
+ "WLAN_IRQ", /* K16 */
+ "PWM_2A", /* U10 */
+ "PWM_2B", /* T10 */
+ "",
+ "",
+ "BATT_LED_4", /* T11 */
+ "BATT_LED_1", /* U12 */
+ "BT_EN", /* K17 */
+ "SPI1_SS1", /* H18 */
+ "UART4_RX", /* T17 */
+ "MDIR_1B"; /* U17 */
+};
+
+&gpio1 {
+ gpio-line-names =
+ "MMC1_DAT0", /* U7 */
+ "MMC1_DAT1", /* V7 */
+ "MMC1_DAT2", /* R8 */
+ "MMC1_DAT3", /* T8 */
+ "MMC1_DAT4", /* U8 */
+ "MMC1_DAT5", /* V8 */
+ "MMC1_DAT6", /* R9 */
+ "MMC1_DAT7", /* T9 */
+ "DCAN1_TX", /* E18 */
+ "DCAN1_RX", /* E17 */
+ "UART0_RX", /* E15 */
+ "UART0_TX", /* E16 */
+ "EQEP_2A", /* T12 */
+ "EQEP_2B", /* R12 */
+ "PRU_E_A", /* V13 */
+ "PRU_E_B", /* U13 */
+ "MDIR_2A", /* R13 */
+ "GPIO1_17", /* V14 */
+ "PWM_1A", /* U14 */
+ "PWM_1B", /* T14 */
+ "EMMC_RST", /* R14 */
+ "USR_LED_0", /* V15 */
+ "USR_LED_1", /* U15 */
+ "USR_LED_2", /* T15 */
+ "USR_LED_3", /* V16 */
+ "GPIO1_25", /* U16 */
+ "MCASP0_AXR0", /* T16 */
+ "MCASP0_AXR1", /* V17 */
+ "MCASP0_ACLKR", /* U18 */
+ "BATT_LED_3", /* V6 */
+ "MMC1_CLK", /* U9 */
+ "MMC1_CMD"; /* V9 */
+};
+
+&gpio2 {
+ gpio-line-names =
+ "MDIR_1A", /* T13 */
+ "MCASP0_FSR", /* V12 */
+ "LED_RED", /* R7 */
+ "LED_GREEN", /* T7 */
+ "MODE_BTN", /* U6 */
+ "PAUSE_BTN", /* T6 */
+ "MDIR_4A", /* R1 */
+ "MDIR_4B", /* R2 */
+ "MDIR_3B", /* R3 */
+ "MDIR_3A", /* R4 */
+ "SVO7", /* T1 */
+ "SVO8", /* T2 */
+ "SVO5", /* T3 */
+ "SVO6", /* T4 */
+ "UART5_TX", /* U1 */
+ "UART5_RX", /* U2 */
+ "SERVO_EN", /* U3 */
+ "NC", /* U4 */
+ "UART3_RX", /* L17 */
+ "UART3_TX", /* L16 */
+ "MMC2_CLK", /* L15 */
+ "DCAN1_SILENT", /* M16 */
+ "SVO1", /* U5 */
+ "SVO3", /* R5 */
+ "SVO2", /* V5 */
+ "SVO4", /* R6 */
+ "MMC0_DAT3", /* F17 */
+ "MMC0_DAT2", /* F18 */
+ "MMC0_DAT1", /* G15 */
+ "MMC0_DAT0", /* G16 */
+ "MMC0_CLK", /* G17 */
+ "MMC0_CMD"; /* G18 */
+};
+
&gpio3 {
+ gpio-line-names =
+ "MMC2_DAT3", /* H16 */
+ "GPIO3_1", /* H17 */
+ "GPIO3_2", /* J15 */
+ "MMC2_CMD", /* J16 */
+ "MMC2_DAT0", /* J17 */
+ "I2C0_SDA", /* C17 */
+ "I2C0_SCL", /* C16 */
+ "EMU1", /* C14 */
+ "EMU0", /* B14 */
+ "WL_EN", /* K18 */
+ "WL_BT_OE", /* L18 */
+ "",
+ "",
+ "NC", /* F15 */
+ "SPI1_SCK", /* A13 */
+ "SPI1_MISO", /* B13 */
+ "SPI1_MOSI", /* D12 */
+ "GPIO3_17", /* C12 */
+ "EQEP_0A", /* B12 */
+ "EQEP_0B", /* C13 */
+ "GPIO3_20", /* D13 */
+ "IMU_INT", /* A14 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
+
ls-buf-en-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-high;
- line-name = "LS_BUF_EN";
};
};
};
};
-&mac {
+&mac_sw {
status = "disabled";
};
};
/* Ethernet */
-&mac {
- slaves = <1>;
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rmii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
};
/* USB */
status = "okay";
};
-&mac {
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
- slaves = <1>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
};
&mmc1 {
clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
clock-names = "ext-clk", "int-clk";
};
+
+&pruss_tm {
+ status = "okay";
+};
clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
clock-names = "ext-clk", "int-clk";
};
+
+&pruss_tm {
+ status = "okay";
+};
reg = <3>;
};
};
+
+&pruss_tm {
+ status = "okay";
+};
};
};
-&mac {
+&mac_sw {
status = "okay";
};
-&davinci_mdio {
- status = "okay";
+&davinci_mdio_sw {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rmii";
-
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <ðphy1>;
phy-mode = "rmii";
+ ti,dual-emac-pvid = <2>;
};
&elm {
dr_mode = "host";
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rmii";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <ðphy1>;
phy-mode = "rmii";
- dual_emac_res_vlan = <3>;
+ ti,dual-emac-pvid = <3>;
};
-&mac {
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
- dual_emac = <1>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
ethphy0: ethernet-phy@5 {
reg = <5>;
regulator-max-microvolt = <5000000>;
};
-&mac {
+&mac_sw {
pinctrl-names = "default";
pinctrl-0 = <&cpsw_default>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
};
-&cpsw_emac0 {
- status = "okay";
+&cpsw_port1 {
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
- status = "okay";
+&cpsw_port2 {
+ ti,dual-emac-pvid = <2>;
};
&sham {
};
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy0: ethernet-phy@4 {
reg = <4>;
};
};
-&cpsw_emac0 {
- status = "okay";
+&cpsw_port1 {
phy-handle = <&phy0>;
phy-mode = "rmii";
};
-&cpsw_emac1 {
+&cpsw_port2 {
status = "disabled";
};
regulator-max-microvolt = <5000000>;
};
-&mac {
+&mac_sw {
pinctrl-names = "default";
pinctrl-0 = <&cpsw_default>;
- dual_emac = <1>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
- status = "okay";
ethphy0: ethernet-phy@4 {
reg = <4>;
};
};
-&cpsw_emac0 {
- status = "okay";
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
- status = "okay";
+&cpsw_port2 {
phy-handle = <ðphy1>;
phy-mode = "rmii";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
&sham {
};
};
-&cpsw_emac0 {
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <ð_slave1_pins_default>;
+ pinctrl-1 = <ð_slave1_pins_sleep>;
+ status = "okay";
+};
+
+&cpsw_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mdio_pins_default>;
pinctrl-1 = <&mdio_pins_sleep>;
- status = "okay";
phy0: ethernet-phy@4 {
reg = <4>;
};
};
-&mac {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <ð_slave1_pins_default>;
- pinctrl-1 = <ð_slave1_pins_sleep>;
- slaves = <1>;
- status = "okay";
-};
-
&rtc {
system-power-controller;
};
};
};
-&cpsw_emac1 {
+&cpsw_port2 {
+ status = "okay";
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
+ ti,dual-emac-pvid = <2>;
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy1: ethernet-phy@6 {
reg = <6>;
eee-broken-1000t;
};
};
+&mac_sw {
+ pinctrl-0 = <ð_slave1_pins_default>, <ð_slave2_pins_default>;
+ pinctrl-1 = <ð_slave1_pins_sleep>, <ð_slave2_pins_sleep>;
+ slaves = <2>;
+};
+
&dcan0 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcan0_pins_default>;
};
};
-&mac {
- pinctrl-0 = <ð_slave1_pins_default>, <ð_slave2_pins_default>;
- pinctrl-1 = <ð_slave1_pins_sleep>, <ð_slave2_pins_sleep>;
- slaves = <2>;
-};
-
&mcasp0 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp0_pins_default>;
};
};
-&mac {
- dual_emac;
+&mac_sw {
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
status = "okay";
ethphy0: ethernet-phy@0 {
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "mii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <ðphy1>;
phy-mode = "mii";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
&mmc1 {
dr_mode = "host";
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy0: ethernet-phy@0 {
reg = <1>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
phy-handle = <&phy0>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy0: ethernet-phy@0 {
reg = <1>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
phy-handle = <&phy0>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
};
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy0: ethernet-phy@0 {
reg = <1>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
phy-handle = <&phy0>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
phy-handle = <&phy1>;
};
clock-frequency = <100000>;
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
+ ti,dual-emac-pvid = <1>;
};
-&mac {
- slaves = <1>;
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
ethphy0: ethernet-phy@4 {
reg = <4>;
};
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy1: ethernet-phy@2 {
reg = <2>;
};
};
-&mac {
- slaves = <2>;
+&mac_sw {
pinctrl-names = "default";
pinctrl-0 = <ðernet0_pins ðernet1_pins>;
- dual_emac;
};
/* Misc */
};
};
-&mac {
+&mac_sw {
pinctrl-names = "default";
pinctrl-0 = <&cpsw_default>;
- dual_emac; /* no switch, two distinct MACs */
status = "okay";
};
-&davinci_mdio {
+&davinci_mdio_sw {
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
- status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "mii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <ðphy1>;
phy-mode = "mii";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
&tscadc {
};
/* Ethernet */
-&cpsw_emac0 {
- status = "okay";
+&cpsw_port1 {
phy-handle = <ðphy0>;
phy-mode = "rgmii";
+ ti,dual-emac-pvid = <1>;
};
-&cpsw_emac1 {
- status = "okay";
+&cpsw_port2 {
phy-handle = <ðphy1>;
phy-mode = "rgmii";
+ ti,dual-emac-pvid = <2>;
};
-&davinci_mdio {
- status = "okay";
+&davinci_mdio_sw {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
};
};
-&mac {
+&mac_sw {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <ðernet_pins>;
};
-
&am33xx_pinmux {
ethernet_pins: pinmux_ethernet {
pinctrl-single,pins = <
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&phy0>;
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};
-&davinci_mdio {
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&davinci_mdio_sw {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
- status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
-&mac {
- slaves = <1>;
+&mac_sw {
pinctrl-names = "default";
pinctrl-0 = <ðernet0_pins>;
status = "okay";
};
};
-&cpsw_emac1 {
+&cpsw_port2 {
+ status = "okay";
phy-handle = <&phy1>;
phy-mode = "mii";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
-&mac {
- slaves = <2>;
+&mac_sw {
pinctrl-names = "default";
pinctrl-0 = <ðernet0_pins ðernet1_pins>;
- dual_emac = <1>;
};
/* GPIOs */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&am33xx_pinmux {
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ usb_hub_ctrl: usb_hub_ctrl {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* rmii1_refclk.gpio0_29 */
+ >;
+ };
+};
+
+&mac_sw {
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+};
+
+&cpsw_port1 {
+ phy-mode = "rgmii-id";
+};
+
+&i2c0 {
+ usb2512b: usb-hub@2c {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_hub_ctrl>;
+ compatible = "microchip,usb2512b";
+ reg = <0x2c>;
+ reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2021 SanCloud Ltd
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+
+/ {
+ model = "SanCloud BeagleBone Enhanced Lite";
+ compatible = "sancloud,am335x-boneenhanced",
+ "ti,am335x-bone-black",
+ "ti,am335x-bone",
+ "ti,am33xx";
+};
+
+&am33xx_pinmux {
+ bb_spi0_pins: pinmux_bb_spi0_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE0)
+ >;
+ };
+};
+
+&spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bb_spi0_pins>;
+
+ channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "micron,spi-authenta";
+
+ reg = <0>;
+ spi-max-frequency = <16000000>;
+ spi-cpha;
+ };
+};
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
#include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
};
&am33xx_pinmux {
- pinctrl-names = "default";
-
- cpsw_default: cpsw_default {
- pinctrl-single,pins = <
- /* Slave 1 */
- AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
- AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
- AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
- AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
- AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
- AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
- AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
- AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
- >;
- };
-
- cpsw_sleep: cpsw_sleep {
- pinctrl-single,pins = <
- /* Slave 1 reset value */
- AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
- AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
- AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
- AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
- AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
- AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
- AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
- AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
- AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
- AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
- AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
- AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
- >;
- };
-
- davinci_mdio_default: davinci_mdio_default {
- pinctrl-single,pins = <
- /* MDIO */
- AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
- >;
- };
-
- davinci_mdio_sleep: davinci_mdio_sleep {
- pinctrl-single,pins = <
- /* MDIO reset value */
- AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
- AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
- >;
- };
-
- usb_hub_ctrl: usb_hub_ctrl {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* rmii1_refclk.gpio0_29 */
- >;
- };
-
mpu6050_pins: pinmux_mpu6050_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE7) /* uart0_ctsn.gpio1_8 */
};
};
-&mac {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&cpsw_default>;
- pinctrl-1 = <&cpsw_sleep>;
- status = "okay";
-};
-
-&davinci_mdio {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&davinci_mdio_default>;
- pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-&cpsw_emac0 {
- phy-handle = <ðphy0>;
- phy-mode = "rgmii-id";
-};
-
&i2c0 {
lps331ap: barometer@5c {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lps3331ap_pins>;
compatible = "st,lps331ap-press";
st,drdy-int-pin = <1>;
reg = <0x5c>;
};
mpu6050: accelerometer@68 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu6050_pins>;
compatible = "invensense,mpu6050";
reg = <0x68>;
interrupt-parent = <&gpio0>;
interrupts = <2 IRQ_TYPE_EDGE_RISING>;
orientation = <0xff 0 0 0 1 0 0 0 0xff>;
};
-
- usb2512b: usb-hub@2c {
- compatible = "microchip,usb2512b";
- reg = <0x2c>;
- reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- /* wifi on port 4 */
- };
};
status = "okay";
};
-&davinci_mdio {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&davinci_mdio_default>;
- pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
-
- ethernetphy0: ethernet-phy@0 {
- reg = <0>;
- smsc,disable-energy-detect;
- };
-};
-
&epwmss1 {
status = "okay";
};
};
-&mac {
+&mac_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
- slaves = <1>;
- cpsw_emac0: slave@200 {
- phy-mode = "mii";
- phy-handle = <ðernetphy0>;
+};
+
+&cpsw_port1 {
+ phy-mode = "mii";
+ phy-handle = <ðernetphy0>;
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&davinci_mdio_sw {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ ethernetphy0: ethernet-phy@0 {
+ reg = <0>;
+ smsc,disable-energy-detect;
};
};
};
};
-&cpsw_emac0 {
+&cpsw_port1 {
phy-mode = "mii";
phy-handle = <ðphy0>;
+ ti,dual-emac-pvid = <1>;
};
-&mac {
+&cpsw_port2 {
+ status = "disabled";
+};
+
+&mac_sw {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
};
-&davinci_mdio {
- status = "okay";
+&davinci_mdio_sw {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
};
};
-&cpsw_emac1 {
+&cpsw_port2 {
+ status = "okay";
phy-handle = <&phy1>;
phy-mode = "mii";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};
-&davinci_mdio {
+&davinci_mdio_sw {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
-&mac {
- slaves = <2>;
+&mac_sw {
pinctrl-names = "default";
pinctrl-0 = <ðernet0_pins ðernet1_pins>;
- dual_emac = <1>;
};
/* MMC */
#size-cells = <1>;
ranges = <0x0 0x300000 0x80000>;
status = "disabled";
+
+ pruss: pruss@0 {
+ compatible = "ti,am3356-pruss";
+ reg = <0x0 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss_mem: memories@0 {
+ reg = <0x0 0x2000>,
+ <0x2000 0x2000>,
+ <0x10000 0x3000>;
+ reg-names = "dram0", "dram1",
+ "shrdram2";
+ };
+
+ pruss_cfg: cfg@26000 {
+ compatible = "ti,pruss-cfg", "syscon";
+ reg = <0x26000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x2000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pruss_iepclk_mux: iepclk-mux@30 {
+ reg = <0x30>;
+ #clock-cells = <0>;
+ clocks = <&l3_gclk>, /* icss_iep_gclk */
+ <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+ };
+ };
+ };
+
+ pruss_mii_rt: mii-rt@32000 {
+ compatible = "ti,pruss-mii", "syscon";
+ reg = <0x32000 0x58>;
+ };
+
+ pruss_intc: interrupt-controller@20000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x20000 0x2000>;
+ interrupts = <20 21 22 23 24 25 26 27>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4", "host_intr5",
+ "host_intr6", "host_intr7";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ pru0: pru@34000 {
+ compatible = "ti,am3356-pru";
+ reg = <0x34000 0x2000>,
+ <0x22000 0x400>,
+ <0x22400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am335x-pru0-fw";
+ };
+
+ pru1: pru@38000 {
+ compatible = "ti,am3356-pru";
+ reg = <0x38000 0x2000>,
+ <0x24000 0x400>,
+ <0x24400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am335x-pru1-fw";
+ };
+
+ pruss_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x32400 0x90>;
+ clocks = <&dpll_core_m4_ck>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
};
};
};
usb1 = &usb1;
phy0 = &usb0_phy;
phy1 = &usb1_phy;
- ethernet0 = &cpsw_emac0;
- ethernet1 = &cpsw_emac1;
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
spi0 = &spi0;
spi1 = &spi1;
mmc0 = &mmc1;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x54400000 0x80000>;
+
+ pruss1: pruss@0 {
+ compatible = "ti,am4376-pruss1";
+ reg = <0x0 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss1_mem: memories@0 {
+ reg = <0x0 0x2000>,
+ <0x2000 0x2000>,
+ <0x10000 0x8000>;
+ reg-names = "dram0", "dram1",
+ "shrdram2";
+ };
+
+ pruss1_cfg: cfg@26000 {
+ compatible = "ti,pruss-cfg", "syscon";
+ reg = <0x26000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x2000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pruss1_iepclk_mux: iepclk-mux@30 {
+ reg = <0x30>;
+ #clock-cells = <0>;
+ clocks = <&sysclk_div>, /* icss_iep_gclk */
+ <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+ };
+ };
+ };
+
+ pruss1_mii_rt: mii-rt@32000 {
+ compatible = "ti,pruss-mii", "syscon";
+ reg = <0x32000 0x58>;
+ };
+
+ pruss1_intc: interrupt-controller@20000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x20000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4",
+ "host_intr6", "host_intr7";
+ ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+ };
+
+ pru1_0: pru@34000 {
+ compatible = "ti,am4376-pru";
+ reg = <0x34000 0x3000>,
+ <0x22000 0x400>,
+ <0x22400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am437x-pru1_0-fw";
+ };
+
+ pru1_1: pru@38000 {
+ compatible = "ti,am4376-pru";
+ reg = <0x38000 0x3000>,
+ <0x24000 0x400>,
+ <0x24400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am437x-pru1_1-fw";
+ };
+
+ pruss1_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x32400 0x90>;
+ clocks = <&dpll_core_m4_ck>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ pruss0: pruss@40000 {
+ compatible = "ti,am4376-pruss0";
+ reg = <0x40000 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss0_mem: memories@40000 {
+ reg = <0x40000 0x1000>,
+ <0x42000 0x1000>;
+ reg-names = "dram0", "dram1";
+ };
+
+ pruss0_cfg: cfg@66000 {
+ compatible = "ti,pruss-cfg", "syscon";
+ reg = <0x66000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x66000 0x2000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pruss0_iepclk_mux: iepclk-mux@30 {
+ reg = <0x30>;
+ #clock-cells = <0>;
+ clocks = <&sysclk_div>, /* icss_iep_gclk */
+ <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+ };
+ };
+ };
+
+ pruss0_mii_rt: mii-rt@72000 {
+ compatible = "ti,pruss-mii", "syscon";
+ reg = <0x72000 0x58>;
+ status = "disabled";
+ };
+
+ pruss0_intc: interrupt-controller@60000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x60000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4",
+ "host_intr6", "host_intr7";
+ ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+ };
+
+ pru0_0: pru@74000 {
+ compatible = "ti,am4376-pru";
+ reg = <0x74000 0x1000>,
+ <0x62000 0x400>,
+ <0x62400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am437x-pru0_0-fw";
+ };
+
+ pru0_1: pru@78000 {
+ compatible = "ti,am4376-pru";
+ reg = <0x78000 0x1000>,
+ <0x64000 0x400>,
+ <0x64400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am437x-pru0_1-fw";
+ };
+ };
};
target-module@50000000 {
<600000 1100000>,
<300000 950000>;
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
&cpu {
cpu0-supply = <&dcdc2>;
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
opp-suspend;
};
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
};
};
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
&cpu {
cpu0-supply = <&dcdc2>;
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
*
* Common PRUSS data for TI AM57xx platforms
*/
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x4b200000 0x80000>;
+
+ pruss1: pruss@0 {
+ compatible = "ti,am5728-pruss";
+ reg = <0x0 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss1_mem: memories@0 {
+ reg = <0x0 0x2000>,
+ <0x2000 0x2000>,
+ <0x10000 0x8000>;
+ reg-names = "dram0", "dram1",
+ "shrdram2";
+ };
+
+ pruss1_cfg: cfg@26000 {
+ compatible = "ti,pruss-cfg", "syscon";
+ reg = <0x26000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x2000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pruss1_iepclk_mux: iepclk-mux@30 {
+ reg = <0x30>;
+ #clock-cells = <0>;
+ clocks = <&dpll_gmac_m3x2_ck>, /* icss_iep_clk */
+ <&dpll_gmac_h13x2_ck>; /* icss_clk */
+ };
+ };
+ };
+
+ pruss1_mii_rt: mii-rt@32000 {
+ compatible = "ti,pruss-mii", "syscon";
+ reg = <0x32000 0x58>;
+ };
+
+ pruss1_intc: interrupt-controller@20000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x20000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4", "host_intr5",
+ "host_intr6", "host_intr7";
+ };
+
+ pru1_0: pru@34000 {
+ compatible = "ti,am5728-pru";
+ reg = <0x34000 0x3000>,
+ <0x22000 0x400>,
+ <0x22400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am57xx-pru1_0-fw";
+ };
+
+ pru1_1: pru@38000 {
+ compatible = "ti,am5728-pru";
+ reg = <0x38000 0x3000>,
+ <0x24000 0x400>,
+ <0x24400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am57xx-pru1_1-fw";
+ };
+
+ pruss1_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&dpll_gmac_h13x2_ck>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ reg = <0x32400 0x90>;
+ };
+ };
};
pruss2_tm: target-module@4b2a6000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x4b280000 0x80000>;
+
+ pruss2: pruss@0 {
+ compatible = "ti,am5728-pruss";
+ reg = <0x0 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss2_mem: memories@0 {
+ reg = <0x0 0x2000>,
+ <0x2000 0x2000>,
+ <0x10000 0x8000>;
+ reg-names = "dram0", "dram1",
+ "shrdram2";
+ };
+
+ pruss2_cfg: cfg@26000 {
+ compatible = "ti,pruss-cfg", "syscon";
+ reg = <0x26000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x26000 0x2000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pruss2_iepclk_mux: iepclk-mux@30 {
+ reg = <0x30>;
+ #clock-cells = <0>;
+ clocks = <&dpll_gmac_m3x2_ck>, /* icss_iep_clk */
+ <&dpll_gmac_h13x2_ck>; /* icss_clk */
+ };
+ };
+ };
+
+ pruss2_mii_rt: mii-rt@32000 {
+ compatible = "ti,pruss-mii", "syscon";
+ reg = <0x32000 0x58>;
+ };
+
+ pruss2_intc: interrupt-controller@20000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x20000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4", "host_intr5",
+ "host_intr6", "host_intr7";
+ };
+
+ pru2_0: pru@34000 {
+ compatible = "ti,am5728-pru";
+ reg = <0x34000 0x3000>,
+ <0x22000 0x400>,
+ <0x22400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am57xx-pru2_0-fw";
+ };
+
+ pru2_1: pru@38000 {
+ compatible = "ti,am5728-pru";
+ reg = <0x38000 0x3000>,
+ <0x24000 0x400>,
+ <0x24400 0x100>;
+ reg-names = "iram", "control", "debug";
+ firmware-name = "am57xx-pru2_1-fw";
+ };
+
+ pruss2_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&dpll_gmac_h13x2_ck>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ reg = <0x32400 0x90>;
+ };
+ };
};
};
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};
* Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
*/
-#include "dra76x.dtsi"
+#include "dra74x-p.dtsi"
#include "am57-pruss.dtsi"
/ {
status = "disabled";
};
-&usb4_tm {
- status = "disabled";
-};
-
&atl_tm {
status = "disabled";
};
pinctrl-2 = <&mmc2_pins_default>;
};
-&m_can0 {
+&emif1 {
+ status = "okay";
+};
+
+&pruss1_mdio {
status = "disabled";
};
-&emif1 {
- status = "okay";
+&pruss2_mdio {
+ status = "disabled";
};
status = "okay";
memory-region = <&dsp2_memory_region>;
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};
status = "okay";
ti,no-reset-on-init;
};
+
+&pruss1_mdio {
+ status = "disabled";
+};
+
+&pruss2_mdio {
+ status = "disabled";
+};
status = "okay";
memory-region = <&gfx_memory>;
};
+
+&rtc {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+ model = "Facebook Cloudripper BMC";
+ compatible = "facebook,cloudripper-bmc", "aspeed,ast2600";
+
+ aliases {
+ /*
+ * PCA9548 (1-0070) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to
+ * SCM (System Controller Module).
+ */
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+
+ /*
+ * PCA9548 (3-0070) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c32 = &imux32;
+ i2c33 = &imux33;
+ i2c34 = &imux34;
+ i2c35 = &imux35;
+ i2c36 = &imux36;
+ i2c37 = &imux37;
+ i2c38 = &imux38;
+ i2c39 = &imux39;
+
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to
+ * PDB (Power Delivery Board).
+ */
+ i2c40 = &imux40;
+ i2c41 = &imux41;
+ i2c42 = &imux42;
+ i2c43 = &imux43;
+ i2c44 = &imux44;
+ i2c45 = &imux45;
+ i2c46 = &imux46;
+ i2c47 = &imux47;
+
+ /*
+ * PCA9548 (15-0076) provides 8 channels connecting to
+ * FCM (Fan Controller Module).
+ */
+ i2c48 = &imux48;
+ i2c49 = &imux49;
+ i2c50 = &imux50;
+ i2c51 = &imux51;
+ i2c52 = &imux52;
+ i2c53 = &imux53;
+ i2c54 = &imux54;
+ i2c55 = &imux55;
+ };
+
+ spi_gpio: spi-gpio {
+ num-chipselects = <2>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+ <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+
+ eeprom@1 {
+ compatible = "atmel,at93c46d";
+ spi-max-frequency = <250000>;
+ data-size = <16>;
+ spi-cs-high;
+ reg = <1>;
+ };
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+/*
+ * "mdio1" is connected to the MDC/MDIO interface of the on-board
+ * management switch (whose ports are connected to BMC, Host and front
+ * panel ethernet port).
+ */
+&mdio1 {
+ status = "okay";
+};
+
+&mdio3 {
+ status = "okay";
+
+ ethphy1: ethernet-phy@13 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0d>;
+ };
+};
+
+&mac3 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&i2c0 {
+ multi-master;
+ bus-frequency = <1000000>;
+};
+
+&i2c1 {
+ /*
+ * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
+ * Main Board).
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c2 {
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+ * Controller Module).
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux28: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c3 {
+ /*
+ * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
+ * Main Board).
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux32: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux33: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux34: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux35: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux36: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux37: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux38: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux39: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c6 {
+ lp5012@14 {
+ compatible = "ti,lp5012";
+ reg = <0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "sys";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "fan";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "psu";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "scm";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+ };
+};
+
+&i2c8 {
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
+ * Delivery Board).
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux40: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux41: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux42: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux43: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux44: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux45: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux46: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux47: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ };
+};
+
+&i2c15 {
+ /*
+ * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
+ * Controller Module).
+ */
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux48: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux49: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux50: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux51: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux52: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux53: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux54: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux55: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+ model = "Facebook Elbert BMC";
+ compatible = "facebook,elbert-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart5;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+
+ /*
+ * 8 child channels of PCA9548 2-0075.
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+
+ /*
+ * 8 child channels of PCA9548 5-0075.
+ */
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ spi_gpio: spi-gpio {
+ num-chipselects = <1>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+ };
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c2 {
+ i2c-switch@75 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c-mux-idle-disconnect;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c5 {
+ i2c-switch@75 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c-mux-idle-disconnect;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux28: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c11 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+ model = "Facebook Fuji BMC";
+ compatible = "facebook,fuji-bmc", "aspeed,ast2600";
+
+ aliases {
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to
+ * SCM (System Controller Module).
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+
+ /*
+ * PCA9548 (11-0077) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c40 = &imux40;
+ i2c41 = &imux41;
+ i2c42 = &imux42;
+ i2c43 = &imux43;
+ i2c44 = &imux44;
+ i2c45 = &imux45;
+ i2c46 = &imux46;
+ i2c47 = &imux47;
+
+ /*
+ * PCA9548 (24-0071) provides 8 channels connecting to
+ * PDB-Left.
+ */
+ i2c48 = &imux48;
+ i2c49 = &imux49;
+ i2c50 = &imux50;
+ i2c51 = &imux51;
+ i2c52 = &imux52;
+ i2c53 = &imux53;
+ i2c54 = &imux54;
+ i2c55 = &imux55;
+
+ /*
+ * PCA9548 (25-0072) provides 8 channels connecting to
+ * PDB-Right.
+ */
+ i2c56 = &imux56;
+ i2c57 = &imux57;
+ i2c58 = &imux58;
+ i2c59 = &imux59;
+ i2c60 = &imux60;
+ i2c61 = &imux61;
+ i2c62 = &imux62;
+ i2c63 = &imux63;
+
+ /*
+ * PCA9548 (26-0076) provides 8 channels connecting to
+ * FCM1.
+ */
+ i2c64 = &imux64;
+ i2c65 = &imux65;
+ i2c66 = &imux66;
+ i2c67 = &imux67;
+ i2c68 = &imux68;
+ i2c69 = &imux69;
+ i2c70 = &imux70;
+ i2c71 = &imux71;
+
+ /*
+ * PCA9548 (27-0076) provides 8 channels connecting to
+ * FCM2.
+ */
+ i2c72 = &imux72;
+ i2c73 = &imux73;
+ i2c74 = &imux74;
+ i2c75 = &imux75;
+ i2c76 = &imux76;
+ i2c77 = &imux77;
+ i2c78 = &imux78;
+ i2c79 = &imux79;
+
+ /*
+ * PCA9548 (40-0076) provides 8 channels connecting to
+ * PIM1.
+ */
+ i2c80 = &imux80;
+ i2c81 = &imux81;
+ i2c82 = &imux82;
+ i2c83 = &imux83;
+ i2c84 = &imux84;
+ i2c85 = &imux85;
+ i2c86 = &imux86;
+ i2c87 = &imux87;
+
+ /*
+ * PCA9548 (41-0076) provides 8 channels connecting to
+ * PIM2.
+ */
+ i2c88 = &imux88;
+ i2c89 = &imux89;
+ i2c90 = &imux90;
+ i2c91 = &imux91;
+ i2c92 = &imux92;
+ i2c93 = &imux93;
+ i2c94 = &imux94;
+ i2c95 = &imux95;
+
+ /*
+ * PCA9548 (42-0076) provides 8 channels connecting to
+ * PIM3.
+ */
+ i2c96 = &imux96;
+ i2c97 = &imux97;
+ i2c98 = &imux98;
+ i2c99 = &imux99;
+ i2c100 = &imux100;
+ i2c101 = &imux101;
+ i2c102 = &imux102;
+ i2c103 = &imux103;
+
+ /*
+ * PCA9548 (43-0076) provides 8 channels connecting to
+ * PIM4.
+ */
+ i2c104 = &imux104;
+ i2c105 = &imux105;
+ i2c106 = &imux106;
+ i2c107 = &imux107;
+ i2c108 = &imux108;
+ i2c109 = &imux109;
+ i2c110 = &imux110;
+ i2c111 = &imux111;
+
+ /*
+ * PCA9548 (44-0076) provides 8 channels connecting to
+ * PIM5.
+ */
+ i2c112 = &imux112;
+ i2c113 = &imux113;
+ i2c114 = &imux114;
+ i2c115 = &imux115;
+ i2c116 = &imux116;
+ i2c117 = &imux117;
+ i2c118 = &imux118;
+ i2c119 = &imux119;
+
+ /*
+ * PCA9548 (45-0076) provides 8 channels connecting to
+ * PIM6.
+ */
+ i2c120 = &imux120;
+ i2c121 = &imux121;
+ i2c122 = &imux122;
+ i2c123 = &imux123;
+ i2c124 = &imux124;
+ i2c125 = &imux125;
+ i2c126 = &imux126;
+ i2c127 = &imux127;
+
+ /*
+ * PCA9548 (46-0076) provides 8 channels connecting to
+ * PIM7.
+ */
+ i2c128 = &imux128;
+ i2c129 = &imux129;
+ i2c130 = &imux130;
+ i2c131 = &imux131;
+ i2c132 = &imux132;
+ i2c133 = &imux133;
+ i2c134 = &imux134;
+ i2c135 = &imux135;
+
+ /*
+ * PCA9548 (47-0076) provides 8 channels connecting to
+ * PIM8.
+ */
+ i2c136 = &imux136;
+ i2c137 = &imux137;
+ i2c138 = &imux138;
+ i2c139 = &imux139;
+ i2c140 = &imux140;
+ i2c141 = &imux141;
+ i2c142 = &imux142;
+ i2c143 = &imux143;
+ };
+
+ spi_gpio: spi-gpio {
+ num-chipselects = <3>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+ <0>, /* device reg=<1> does not exist */
+ <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+ eeprom@2 {
+ compatible = "atmel,at93c46d";
+ spi-max-frequency = <250000>;
+ data-size = <16>;
+ spi-cs-high;
+ reg = <2>;
+ };
+ };
+};
+
+&i2c0 {
+ multi-master;
+ bus-frequency = <1000000>;
+};
+
+&i2c2 {
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+ * Controller Module).
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ shunt-resistor-micro-ohms = <1500>;
+ };
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c8 {
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+ * Main Board).
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ imux48: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux49: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux50: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ lp5012@14 {
+ compatible = "ti,lp5012";
+ reg = <0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "sys";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "fan";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "psu";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "smb";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+ };
+ };
+
+ imux51: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux52: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux53: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux54: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux55: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ i2c-switch@72 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ i2c-mux-idle-disconnect;
+
+ imux56: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux57: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux58: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux59: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux60: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux61: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux62: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux63: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux64: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux65: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux66: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux67: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ shunt-resistor-micro-ohms = <250>;
+ };
+ };
+
+ imux68: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux69: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux70: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux71: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux72: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux73: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux74: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux75: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ shunt-resistor-micro-ohms = <250>;
+ };
+ };
+
+ imux76: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux77: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux78: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux79: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux28: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ /*
+ * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+ * Main Board).
+ */
+ i2c-switch@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect;
+
+ imux40: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux80: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux81: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux82: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux83: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux84: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux85: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux86: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux87: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux41: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux88: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux89: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux90: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux91: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux92: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux93: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux94: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux95: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux42: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux96: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux97: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux98: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux99: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux100: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux101: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux102: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux103: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux43: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux104: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux105: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux106: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux107: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux108: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux109: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux110: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux111: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux44: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux112: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux113: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux114: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux115: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux116: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux117: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux118: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux119: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux45: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux120: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux121: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux122: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux123: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux124: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux125: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux126: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux127: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux46: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux128: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux129: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux130: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux131: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux132: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux133: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux134: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux135: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux47: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux136: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux137: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux138: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux139: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux140: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux141: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux142: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux143: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mdio1 {
+ status = "okay";
+
+ ethphy3: ethernet-phy@13 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0d>;
+ };
+};
+
+&mac3 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <ðphy3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
&vhub {
status = "okay";
};
-
-&adc {
- status = "okay";
-};
};
/*
- * FIT image: 59.5 MB.
+ * FIT image: 55.5 MB.
*/
fit@80000 {
- reg = <0x80000 0x3b80000>;
+ reg = <0x80000 0x3780000>;
label = "fit";
};
/*
- * "data0" partition (4MB) is reserved for persistent
+ * "data0" partition (8MB) is reserved for persistent
* data store.
*/
data0@3800000 {
- reg = <0x3c00000 0x400000>;
+ reg = <0x3800000 0x800000>;
label = "data0";
};
stdout-path = &uart3;
bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
};
+
+ ast-adc-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+ };
};
&wdt2 {
status = "disabled";
};
-&adc {
- status = "okay";
-};
-
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
* Both firmware flashes are 128MB on Wedge400 BMC.
*/
&fmc_flash0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /*
- * u-boot partition: 384KB.
- */
- u-boot@0 {
- reg = <0x0 0x60000>;
- label = "u-boot";
- };
-
- /*
- * u-boot environment variables: 128KB.
- */
- u-boot-env@60000 {
- reg = <0x60000 0x20000>;
- label = "env";
- };
-
- /*
- * FIT image: 123.5 MB.
- */
- fit@80000 {
- reg = <0x80000 0x7b80000>;
- label = "fit";
- };
-
- /*
- * "data0" partition (4MB) is reserved for persistent
- * data store.
- */
- data0@7c00000 {
- reg = <0x7c00000 0x400000>;
- label = "data0";
- };
-
- /*
- * "flash0" partition (covering the entire flash) is
- * explicitly created to avoid breaking legacy applications.
- */
- flash0@0 {
- reg = <0x0 0x8000000>;
- label = "flash0";
- };
- };
+#include "facebook-bmc-flash-layout-128.dtsi"
};
&fmc_flash1 {
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "","","","","led-pcieslot-power","","","",
/*Q0-Q7*/ "","","","","","","","",
- /*R0-R7*/ "","","","","","I2C_FLASH_MICRO_N","","",
+ /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
/*S0-S7*/ "","","","","","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
type = <PCA955X_TYPE_GPIO>;
};
- gpio@01 {
+ gpio@1 {
reg = <1>;
type = <PCA955X_TYPE_GPIO>;
};
&emmc {
status = "okay";
- clk-phase-mmc-hs200 = <180>, <180>;
+ clk-phase-mmc-hs200 = <210>, <228>;
};
&fsim0 {
/*O0-O7*/ "","","","usb-power","","","","",
/*P0-P7*/ "","","","","pcieslot-power","","","",
/*Q0-Q7*/ "cfam-reset","","","","","","","",
- /*R0-R7*/ "","","","","","","","",
+ /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
/*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3",
"","","","",
/*T0-T7*/ "","","","","","","","",
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "NF5280M6 BMC";
+ compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlycon";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>; /* 16M */
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ bmc_alive {
+ label = "bmc_alive";
+ gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ led-pattern = <1000 1000>;
+ };
+
+ front-fan {
+ label = "front-fan";
+ gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
+ };
+
+ front-psu {
+ label = "front-psu";
+ gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
+ };
+
+ front-syshot {
+ label = "front-syshot";
+ gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ front-memory {
+ label = "front-memory";
+ gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
+ };
+
+ identify {
+ label = "identify";
+ gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bios";
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+ <&syscon ASPEED_CLK_MAC1RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&gpio {
+ status = "okay";
+ /* Enable GPIOE0 and GPIOE2 pass-through by default */
+ pinctrl-names = "pass-through";
+ pinctrl-0 = <&pinctrl_gpie0_default
+ &pinctrl_gpie2_default>;
+ gpio-line-names =
+ /*A0-A7*/ "","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
+ /*B0-B7*/ "BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
+ "FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
+ "FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
+ "BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
+ /*E0-E7*/ "FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
+ "FM_BOARD_ID4","FM_BOARD_ID5","","",
+ /*F0-F7*/ "PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
+ "BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
+ "RST_GLB_RST_WARN_N",
+ /*G0-G7*/ "IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
+ "BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
+ /*H0-H7*/ "JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
+ "FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
+ /*I0-I7*/ "FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
+ "FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
+ /*J0-J7*/ "FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
+ "VGA_HSYNC","VGA_VSYNC","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
+ /*R0-R7*/ "SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
+ "DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
+ "RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
+ /*S0-S7*/ "BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
+ "GPIOS5_BMC","","GPIOS7_BMC",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
+ /*Z0-Z7*/ "XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
+ "GPIOZ5","","",
+ /*AA0-AA7*/ "FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
+ "FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
+ /*AB0-AB7*/ "RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
+ /*AC0-AC7*/ "","","","","","","","";
+};
+
+&i2c0 {
+ /* FP_LCD */
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ label = "fru";
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ tmp112@48 {
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ label = "inlet";
+ };
+
+ tmp112@49 {
+ compatible = "ti,tmp112";
+ reg = <0x49>;
+ label = "outlet";
+ };
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ };
+
+ pca9548@71 {
+ compatible = "nxp,pca9548";
+ reg = <0x71>;
+ };
+
+ pca9548@72 {
+ compatible = "nxp,pca9548";
+ reg = <0x72>;
+ };
+};
+
+&i2c4 {
+ /* IPMB */
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ adm1278@33 {
+ compatible = "adi,adm1293";
+ reg = <0x33>;
+ };
+
+ adm1278@32 {
+ compatible = "adi,adm1293";
+ reg = <0x32>;
+ };
+
+ adm1278@20 {
+ compatible = "adi,adm1293";
+ reg = <0x20>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ pca0: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca1: pca9555@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca2: pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca3: pca9555@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+};
+
+&i2c9 {
+ /* cpld */
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+
+ pca4: pca9555@24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca5: pca9555@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ power-supply@58 {
+ compatible = "inspur,ipsps1";
+ reg = <0x58>;
+ };
+
+ power-supply@59 {
+ compatible = "inspur,ipsps1";
+ reg = <0x59>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default
+ &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+ };
+
+ fan@6 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+ };
+
+ fan@7 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+ };
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+};
+
+&kcs4 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca4>;
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+ &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+ &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+ &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&vuart {
+ status = "okay";
+};
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "led-rear-power","led-rear-id","","usb-power","","","","",
- /*P0-P7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","bmc-tpm-reset","","",
/*Q0-Q7*/ "cfam-reset","","","","","","","fsi-routing",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","","","","","","",
reg = <0x1e780200 0x0100>;
clocks = <&syscon ASPEED_CLK_APB>;
interrupt-controller;
- ngpios = <8>;
bus-frequency = <12000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgpm_default>;
};
pinctrl_hvi3c3_default: hvi3c3_default {
- function = "HVI3C3";
+ function = "I3C3";
groups = "HVI3C3";
};
pinctrl_hvi3c4_default: hvi3c4_default {
- function = "HVI3C4";
+ function = "I3C4";
groups = "HVI3C4";
};
#interrupt-cells = <2>;
};
+ sgpiom0: sgpiom@1e780500 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2600-sgpiom";
+ reg = <0x1e780500 0x100>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ interrupt-controller;
+ bus-frequency = <12000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgpm1_default>;
+ status = "disabled";
+ };
+
+ sgpiom1: sgpiom@1e780600 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2600-sgpiom";
+ reg = <0x1e780600 0x100>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ interrupt-controller;
+ bus-frequency = <12000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgpm2_default>;
+ status = "disabled";
+ };
+
gpio1: gpio@1e780800 {
#gpio-cells = <2>;
gpio-controller;
&vhub {
status = "okay";
};
+
+&adc {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ aliases {
+ mmc0 = &emmc;
+ spi1 = &spi1;
+ spi2 = &spi_gpio;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,9600n8 root=/dev/ram rw vmalloc=640M";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ /*
+ * GPIO-based SPI Master is required to access SPI TPM, because
+ * full-duplex SPI transactions are not supported by ASPEED SPI
+ * Controllers.
+ */
+ spi_gpio: spi-gpio {
+ status = "okay";
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+
+ tpmdev@0 {
+ compatible = "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "spi0.0";
+
+#include "facebook-bmc-flash-layout-128.dtsi"
+ };
+
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "spi0.1";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash1@0 {
+ reg = <0x0 0x8000000>;
+ label = "flash1";
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&emmc {
+ status = "okay";
+
+ non-removable;
+ max-frequency = <25000000>;
+ bus-width = <4>;
+};
+
+&rtc {
+ status = "okay";
+};
};
&shutdown_controller {
- atmel,shdwc-debouncer = <976>;
+ debounce-delay-us = <976>;
atmel,wakeup-rtc-timer;
input@0 {
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
status = "okay"; /* Conflict with pwm0. */
red {
AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA19 DAT2 periph A with pullup */
AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA20 DAT3 periph A with pullup */
};
+ pinctrl_sdmmc0_cd: sdmmc0_cd {
+ atmel,pins =
+ <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
};
sdmmc1 {
AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
+
+ leds {
+ pinctrl_gpio_leds: gpio_leds {
+ atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
}; /* pinctrl */
&pwm0 {
&sdmmc0 {
bus-width = <4>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sdmmc0_default>;
+ pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
status = "okay";
cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
disable-wp;
};
&shutdown_controller {
- atmel,shdwc-debouncer = <976>;
+ debounce-delay-us = <976>;
status = "okay";
input@0 {
spi-rx-bus-width = <4>;
m25p,fast-read;
- at91bootstrap@00000000 {
+ at91bootstrap@0 {
label = "at91bootstrap";
reg = <0x00000000 0x00040000>;
};
- bootloader@00040000 {
+ bootloader@40000 {
label = "bootloader";
reg = <0x00040000 0x000c0000>;
};
- bootloaderenvred@00100000 {
+ bootloaderenvred@100000 {
label = "bootloader env redundant";
reg = <0x00100000 0x00040000>;
};
- bootloaderenv@00140000 {
+ bootloaderenv@140000 {
label = "bootloader env";
reg = <0x00140000 0x00040000>;
};
- dtb@00180000 {
+ dtb@180000 {
label = "device tree";
reg = <0x00180000 0x00080000>;
};
- kernel@00200000 {
+ kernel@200000 {
label = "kernel";
reg = <0x00200000 0x00600000>;
};
};
shdwc@f8048010 {
- atmel,shdwc-debouncer = <976>;
+ debounce-delay-us = <976>;
atmel,wakeup-rtc-timer;
input@0 {
adc: adc@fc030000 {
vddana-supply = <&vddana>;
vref-supply = <&advref>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus1_an &pinctrl_mikrobus2_an>;
- status = "disabled";
+ status = "okay";
};
pinctrl@fc038000 {
};
&shutdown_controller {
- atmel,shdwc-debouncer = <976>;
+ debounce-delay-us = <976>;
atmel,wakeup-rtc-timer;
input@0 {
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
status = "okay";
mcp16502@5b {
&i2c0 { /* mikrobus i2c */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
status = "okay";
};
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_default>;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
status = "okay";
eeprom@50 {
};
&shutdown_controller {
- atmel,shdwc-debouncer = <976>;
+ debounce-delay-us = <976>;
atmel,wakeup-rtc-timer;
input@0 {
reg = <0x40000 0xc0000>;
};
- bootloaderenvred@0x100000 {
+ bootloaderenvred@100000 {
label = "bootloader env redundant";
reg = <0x100000 0x40000>;
};
- bootloaderenv@0x140000 {
+ bootloaderenv@140000 {
label = "bootloader env";
reg = <0x140000 0x40000>;
};
};
shdwc@f8048010 {
- atmel,shdwc-debouncer = <976>;
+ debounce-delay-us = <976>;
input@0 {
reg = <0>;
spi-rx-bus-width = <4>;
m25p,fast-read;
- at91bootstrap@00000000 {
+ at91bootstrap@0 {
label = "at91bootstrap";
reg = <0x00000000 0x00040000>;
};
- bootloader@00040000 {
+ bootloader@40000 {
label = "bootloader";
reg = <0x00040000 0x000c0000>;
};
- bootloaderenvred@00100000 {
+ bootloaderenvred@100000 {
label = "bootloader env redundant";
reg = <0x00100000 0x00040000>;
};
- bootloaderenv@00140000 {
+ bootloaderenv@140000 {
label = "bootloader env";
reg = <0x00140000 0x00040000>;
};
- dtb@00180000 {
+ dtb@180000 {
label = "device tree";
reg = <0x00180000 0x00080000>;
};
- kernel@00200000 {
+ kernel@200000 {
label = "kernel";
reg = <0x00200000 0x00600000>;
};
- misc@00800000 {
+ misc@800000 {
label = "misc";
reg = <0x00800000 0x00000000>;
};
};
shdwc@f8048010 {
- atmel,shdwc-debouncer = <976>;
+ debounce-delay-us = <976>;
atmel,wakeup-rtc-timer;
input@0 {
};
spi0: spi@f0004000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0_cs>;
cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
status = "okay";
};
};
spi1: spi@f8008000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_cs>;
cs-gpios = <&pioC 25 0>;
status = "okay";
};
<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
+
+ pinctrl_gpio_leds: gpio_leds_default {
+ atmel,pins =
+ <AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_spi0_cs: spi0_cs_default {
+ atmel,pins =
+ <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_spi1_cs: spi1_cs_default {
+ atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
+ atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
};
};
};
vcc_mmc0_reg: fixedregulator_mmc0 {
compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
regulator-name = "mmc0-card-supply";
regulator-min-microvolt = <3300000>;
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+ status = "okay";
d2 {
label = "d2";
};
d3 {
- label = "d3";
+ label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */
gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
};
};
*/
/dts-v1/;
#include "sama5d4.dtsi"
+#include <dt-bindings/input/input.h>
/ {
model = "Atmel SAMA5D4 Xplained";
status = "okay";
};
- spi0: spi@f8010000 {
- cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
- status = "okay";
- m25p80@0 {
- compatible = "atmel,at25df321a";
- spi-max-frequency = <50000000>;
- reg = <0>;
- };
- };
-
i2c0: i2c@f8014000 {
i2c-digital-filter;
status = "okay";
};
spi1: spi@fc018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0_cs>;
cs-gpios = <&pioB 21 0>;
status = "okay";
};
atmel,pins =
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
+ pinctrl_spi0_cs: spi0_cs_default {
+ atmel,pins =
+ <AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_gpio_leds: gpio_leds_default {
+ atmel,pins =
+ <AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
+ atmel,pins =
+ <AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
};
};
};
pb_user1 {
label = "pb_user1";
gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
- linux,code = <0x100>;
+ linux,code = <KEY_PROG1>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
status = "okay";
d8 {
vcc_mmc1_reg: fixedregulator_mmc1 {
compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
regulator-name = "VDD MCI1";
regulator-min-microvolt = <3300000>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
+ *
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Eugen Hristev <eugen.hristev@microchip.com>
+ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Microchip SAMA7G5-EK";
+ compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
+
+ chosen {
+ bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart3;
+ serial1 = &uart4;
+ serial2 = &uart7;
+ serial3 = &uart0;
+ i2c0 = &i2c1;
+ i2c1 = &i2c8;
+ i2c2 = &i2c9;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <24000000>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+ bp1 {
+ label = "PB_USER";
+ gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PROG1>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led_gpio_default>;
+ status = "okay"; /* Conflict with pwm. */
+
+ red_led {
+ label = "red";
+ gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+ };
+
+ green_led {
+ label = "green";
+ gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
+ };
+
+ blue_led {
+ label = "blue";
+ gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ /* 512 M */
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x20000000>;
+ };
+
+ sound: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sama7g5ek audio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ cpu {
+ sound-dai = <&spdiftx>;
+ };
+ codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+ simple-audio-card,dai-link@1 {
+ reg = <1>;
+ cpu {
+ sound-dai = <&spdifrx>;
+ };
+ codec {
+ sound-dai = <&spdif_in>;
+ };
+ };
+ };
+
+ spdif_in: spdif-in {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dir";
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vddcpu>;
+};
+
+&dma0 {
+ status = "okay";
+};
+
+&dma1 {
+ status = "okay";
+};
+
+&dma2 {
+ status = "okay";
+};
+
+&flx0 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "disabled";
+
+ uart0: serial@200 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx0_default>;
+ status = "disabled";
+ };
+};
+
+&flx1 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c1: i2c@600 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ status = "okay";
+
+ mcp16502@5b {
+ compatible = "microchip,mcp16502";
+ reg = <0x5b>;
+ status = "okay";
+
+ regulators {
+ vdd_3v3: VDD_IO {
+ regulator-name = "VDD_IO";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-initial-mode = <2>;
+ regulator-allowed-modes = <2>, <4>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ regulator-mode = <4>;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-mode = <4>;
+ };
+ };
+
+ vddioddr: VDD_DDR {
+ regulator-name = "VDD_DDR";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-initial-mode = <2>;
+ regulator-allowed-modes = <2>, <4>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ regulator-mode = <4>;
+ };
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <4>;
+ };
+ };
+
+ vddcore: VDD_CORE {
+ regulator-name = "VDD_CORE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-initial-mode = <2>;
+ regulator-allowed-modes = <2>, <4>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ regulator-mode = <4>;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-mode = <4>;
+ };
+ };
+
+ vddcpu: VDD_OTHER {
+ regulator-name = "VDD_OTHER";
+ regulator-min-microvolt = <1125000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-initial-mode = <2>;
+ regulator-allowed-modes = <2>, <4>;
+ regulator-ramp-delay = <3125>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ regulator-mode = <4>;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-mode = <4>;
+ };
+ };
+
+ vldo1: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vldo2: LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+ };
+};
+
+&flx3 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "okay";
+
+ uart3: serial@200 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx3_default>;
+ status = "okay";
+ };
+};
+
+&flx4 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "okay";
+
+ uart4: serial@200 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx4_default>;
+ status = "okay";
+ };
+};
+
+&flx7 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "okay";
+
+ uart7: serial@200 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx7_default>;
+ status = "okay";
+ };
+};
+
+&flx8 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c8: i2c@600 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c8_default>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ status = "okay";
+ };
+};
+
+&flx9 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c9: i2c@600 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c9_default>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ status = "okay";
+ };
+};
+
+&flx11 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+ status = "okay";
+
+ spi11: spi@400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+ status = "okay";
+ };
+};
+
+&gmac0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ ethernet-phy@7 {
+ reg = <0x7>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&gmac1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>;
+ phy-mode = "rmii";
+ status = "okay";
+
+ ethernet-phy@0 {
+ reg = <0x0>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2s0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s0_default>;
+};
+
+&pioA {
+ pinctrl_flx0_default: flx0_default {
+ pinmux = <PIN_PE3__FLEXCOM0_IO0>,
+ <PIN_PE4__FLEXCOM0_IO1>,
+ <PIN_PE6__FLEXCOM0_IO3>,
+ <PIN_PE7__FLEXCOM0_IO4>;
+ bias-disable;
+ };
+
+ pinctrl_flx3_default: flx3_default {
+ pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+ <PIN_PD17__FLEXCOM3_IO1>;
+ bias-disable;
+ };
+
+ pinctrl_flx4_default: flx4_default {
+ pinmux = <PIN_PD18__FLEXCOM4_IO0>,
+ <PIN_PD19__FLEXCOM4_IO1>;
+ bias-disable;
+ };
+
+ pinctrl_flx7_default: flx7_default {
+ pinmux = <PIN_PC23__FLEXCOM7_IO0>,
+ <PIN_PC24__FLEXCOM7_IO1>;
+ bias-disable;
+ };
+
+ pinctrl_gmac0_default: gmac0_default {
+ pinmux = <PIN_PA16__G0_TX0>,
+ <PIN_PA17__G0_TX1>,
+ <PIN_PA26__G0_TX2>,
+ <PIN_PA27__G0_TX3>,
+ <PIN_PA19__G0_RX0>,
+ <PIN_PA20__G0_RX1>,
+ <PIN_PA28__G0_RX2>,
+ <PIN_PA29__G0_RX3>,
+ <PIN_PA15__G0_TXEN>,
+ <PIN_PA30__G0_RXCK>,
+ <PIN_PA18__G0_RXDV>,
+ <PIN_PA22__G0_MDC>,
+ <PIN_PA23__G0_MDIO>,
+ <PIN_PA25__G0_125CK>;
+ bias-disable;
+ };
+
+ pinctrl_gmac0_txck_default: gmac0_txck_default {
+ pinmux = <PIN_PA24__G0_TXCK>;
+ bias-pull-up;
+ };
+
+ pinctrl_gmac0_phy_irq: gmac0_phy_irq {
+ pinmux = <PIN_PA31__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_gmac1_default: gmac1_default {
+ pinmux = <PIN_PD30__G1_TXCK>,
+ <PIN_PD22__G1_TX0>,
+ <PIN_PD23__G1_TX1>,
+ <PIN_PD21__G1_TXEN>,
+ <PIN_PD25__G1_RX0>,
+ <PIN_PD26__G1_RX1>,
+ <PIN_PD27__G1_RXER>,
+ <PIN_PD24__G1_RXDV>,
+ <PIN_PD28__G1_MDC>,
+ <PIN_PD29__G1_MDIO>;
+ bias-disable;
+ };
+
+ pinctrl_gmac1_phy_irq: gmac1_phy_irq {
+ pinmux = <PIN_PA21__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_i2c1_default: i2c1_default {
+ pinmux = <PIN_PC9__FLEXCOM1_IO0>,
+ <PIN_PC10__FLEXCOM1_IO1>;
+ bias-disable;
+ };
+
+ pinctrl_i2c8_default: i2c8_default {
+ pinmux = <PIN_PC14__FLEXCOM8_IO0>,
+ <PIN_PC13__FLEXCOM8_IO1>;
+ bias-disable;
+ };
+
+ pinctrl_i2c9_default: i2c9_default {
+ pinmux = <PIN_PC18__FLEXCOM9_IO0>,
+ <PIN_PC19__FLEXCOM9_IO1>;
+ bias-disable;
+ };
+
+ pinctrl_i2s0_default: i2s0_default {
+ pinmux = <PIN_PB23__I2SMCC0_CK>,
+ <PIN_PB24__I2SMCC0_WS>,
+ <PIN_PB25__I2SMCC0_DOUT1>,
+ <PIN_PB26__I2SMCC0_DOUT0>,
+ <PIN_PB27__I2SMCC0_MCK>;
+ bias-disable;
+ };
+
+ pinctrl_key_gpio_default: key_gpio_default {
+ pinmux = <PIN_PA12__GPIO>;
+ bias-pull-up;
+ };
+
+ pinctrl_led_gpio_default: led_gpio_default {
+ pinmux = <PIN_PA13__GPIO>,
+ <PIN_PB8__GPIO>,
+ <PIN_PD20__GPIO>;
+ bias-pull-up;
+ };
+
+ pinctrl_mikrobus1_an_default: mikrobus1_an_default {
+ pinmux = <PIN_PD0__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_an_default: mikrobus2_an_default {
+ pinmux = <PIN_PD1__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
+ pinmux = <PIN_PA13__PWMH2>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
+ pinmux = <PIN_PD20__PWMH3>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+ pinmux = <PIN_PB6__FLEXCOM11_IO3>;
+ bias-disable;
+ };
+
+ pinctrl_mikrobus1_spi: mikrobus1_spi {
+ pinmux = <PIN_PB3__FLEXCOM11_IO0>,
+ <PIN_PB4__FLEXCOM11_IO1>,
+ <PIN_PB5__FLEXCOM11_IO2>;
+ bias-disable;
+ };
+
+ pinctrl_sdmmc0_default: sdmmc0_default {
+ cmd_data {
+ pinmux = <PIN_PA1__SDMMC0_CMD>,
+ <PIN_PA3__SDMMC0_DAT0>,
+ <PIN_PA4__SDMMC0_DAT1>,
+ <PIN_PA5__SDMMC0_DAT2>,
+ <PIN_PA6__SDMMC0_DAT3>,
+ <PIN_PA7__SDMMC0_DAT4>,
+ <PIN_PA8__SDMMC0_DAT5>,
+ <PIN_PA9__SDMMC0_DAT6>,
+ <PIN_PA10__SDMMC0_DAT7>;
+ bias-pull-up;
+ };
+
+ ck_cd_rstn_vddsel {
+ pinmux = <PIN_PA0__SDMMC0_CK>,
+ <PIN_PA2__SDMMC0_RSTN>,
+ <PIN_PA11__SDMMC0_DS>;
+ bias-pull-up;
+ };
+ };
+
+ pinctrl_sdmmc1_default: sdmmc1_default {
+ cmd_data {
+ pinmux = <PIN_PB29__SDMMC1_CMD>,
+ <PIN_PB31__SDMMC1_DAT0>,
+ <PIN_PC0__SDMMC1_DAT1>,
+ <PIN_PC1__SDMMC1_DAT2>,
+ <PIN_PC2__SDMMC1_DAT3>;
+ bias-pull-up;
+ };
+
+ ck_cd_rstn_vddsel {
+ pinmux = <PIN_PB30__SDMMC1_CK>,
+ <PIN_PB28__SDMMC1_RSTN>,
+ <PIN_PC5__SDMMC1_1V8SEL>,
+ <PIN_PC4__SDMMC1_CD>;
+ bias-pull-up;
+ };
+ };
+
+ pinctrl_sdmmc2_default: sdmmc2_default {
+ cmd_data {
+ pinmux = <PIN_PD3__SDMMC2_CMD>,
+ <PIN_PD5__SDMMC2_DAT0>,
+ <PIN_PD6__SDMMC2_DAT1>,
+ <PIN_PD7__SDMMC2_DAT2>,
+ <PIN_PD8__SDMMC2_DAT3>;
+ bias-pull-up;
+ };
+
+ ck {
+ pinmux = <PIN_PD4__SDMMC2_CK>;
+ bias-pull-up;
+ };
+ };
+
+ pinctrl_spdifrx_default: spdifrx_default {
+ pinmux = <PIN_PB0__SPDIF_RX>;
+ bias-disable;
+ };
+
+ pinctrl_spdiftx_default: spdiftx_default {
+ pinmux = <PIN_PB1__SPDIF_TX>;
+ bias-disable;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
+ status = "disabled"; /* Conflict with leds. */
+};
+
+&rtt {
+ atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ sdhci-caps-mask = <0x0 0x00200000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc0_default>;
+ status = "okay";
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ no-1-8-v;
+ sdhci-caps-mask = <0x0 0x00200000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc1_default>;
+ status = "okay";
+};
+
+&sdmmc2 {
+ bus-width = <4>;
+ no-1-8-v;
+ sdhci-caps-mask = <0x0 0x00200000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc2_default>;
+};
+
+&spdifrx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdifrx_default>;
+ status = "okay";
+};
+
+&spdiftx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdiftx_default>;
+ status = "okay";
+};
+
+&trng {
+ status = "okay";
+};
+
+&vddout25 {
+ vin-supply = <&vdd_3v3>;
+ status = "okay";
+};
label = "X-Loader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition@0x1c0000 {
+ partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
label = "X-Loader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition@0x1c0000 {
+ partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
--- /dev/null
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+ compatible = "ti,dra762", "ti,dra7";
+
+ ocp {
+ emif1: emif@4c000000 {
+ compatible = "ti,emif-dra7xx";
+ reg = <0x4c000000 0x200>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+};
+
+/* MCAN interrupts are hard-wired to irqs 67, 68 */
+&crossbar_mpu {
+ ti,irqs-skip = <10 67 68 133 139 140>;
+};
compatible = "ti,dra762", "ti,dra7";
ocp {
- emif1: emif@4c000000 {
- compatible = "ti,emif-dra7xx";
- reg = <0x4c000000 0x200>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
target-module@42c01900 {
compatible = "ti,sysc-dra7-mcan", "ti,sysc";
ranges = <0x0 0x42c00000 0x2000>;
};
};
-/* MCAN interrupts are hard-wired to irqs 67, 68 */
-&crossbar_mpu {
- ti,irqs-skip = <10 67 68 133 139 140>;
-};
-
&scm_conf_clocks {
dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
#clock-cells = <0>;
#address-cells = <1>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
#address-cells = <1>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
cpu0: cpu@900 {
device_type = "cpu";
compatible = "arm,cortex-a9";
#address-cells = <1>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ };
+
cpu0: cpu@a00 {
device_type = "cpu";
compatible = "arm,cortex-a9";
#address-cells = <1>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu2>;
+ };
+ core1 {
+ cpu = <&cpu3>;
+ };
+ core2 {
+ cpu = <&cpu4>;
+ };
+ core3 {
+ cpu = <&cpu5>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
cci-control-port = <&cci_control1>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x1>;
cci-control-port = <&cci_control1>;
};
- cpu@100 {
+ cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x100>;
cci-control-port = <&cci_control0>;
};
- cpu@101 {
+ cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x101>;
cci-control-port = <&cci_control0>;
};
- cpu@102 {
+ cpu4: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x102>;
cci-control-port = <&cci_control0>;
};
- cpu@103 {
+ cpu5: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x103>;
#address-cells = <1>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
#address-cells = <1>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
cpu0: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a7";
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * u-boot partition: 896KB.
+ */
+ u-boot@0 {
+ reg = <0x0 0xe0000>;
+ label = "u-boot";
+ };
+
+ /*
+ * u-boot environment variables: 64KB.
+ */
+ u-boot-env@e0000 {
+ reg = <0xe0000 0x10000>;
+ label = "env";
+ };
+
+ /*
+ * image metadata partition (64KB), used by Facebook internal
+ * tools.
+ */
+ image-meta@f0000 {
+ reg = <0xf0000 0x10000>;
+ label = "meta";
+ };
+
+ /*
+ * FIT image: 119 MB.
+ */
+ fit@100000 {
+ reg = <0x100000 0x7700000>;
+ label = "fit";
+ };
+
+ /*
+ * "data0" partition (8MB) is used by Facebook BMC platforms as
+ * persistent data store.
+ */
+ data0@7800000 {
+ reg = <0x7800000 0x800000>;
+ label = "data0";
+ };
+
+ /*
+ * Although the master partition can be created by enabling
+ * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+ * explicitly created to avoid breaking legacy applications.
+ */
+ flash0@0 {
+ reg = <0x0 0x8000000>;
+ label = "flash0";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6DL-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCOM PCB number: 493-300 or newer
+ * PicoITX PCB number: 487-600 or newer
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-picoitx.dtsi"
+
+/ {
+ model = "DH electronics i.MX6DL DHCOM on PicoITX";
+ compatible = "dh,imx6dl-dhcom-picoitx", "dh,imx6dl-dhcom-som",
+ "fsl,imx6dl";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+ model = "SKOV IMX6 CPU SoloCore";
+ compatible = "skov,imx6dl-skov-revc-lt2", "fsl,imx6dl";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+ model = "SKOV IMX6 CPU SoloCore";
+ compatible = "skov,imx6dl-skov-revc-lt6", "fsl,imx6dl";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+ pwms = <&pwm2 0 20000 0>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <17>;
+ default-brightness-level = <8>;
+ power-supply = <®_24v0>;
+ };
+
+ display {
+ compatible = "fsl,imx-parallel-display";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ display0_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ display0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ panel {
+ compatible = "logictechno,lttd800480070-l6wh-rt";
+ backlight = <&backlight>;
+ power-supply = <®_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display0_out>;
+ };
+ };
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+ pinctrl_backlight: backlightgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x58
+ >;
+ };
+
+ pinctrl_ipu1: ipu1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-solidsense.dtsi"
+
+/ {
+ model = "SolidRun SolidSense Solo/DualLite (1.5som+emmc)";
+ compatible = "solidrun,solidsense/dl", "fsl,imx6dl";
+};
-// SPDX-License-Identifier: (GPL-2.0+)
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2015 DH electronics GmbH
+ * Copyright (C) 2015-2021 DH electronics GmbH
* Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6Q-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCOM PCB number: 493-300 or newer
+ * PDK2 PCB number: 516-400 or newer
*/
-
/dts-v1/;
-#include "imx6q-dhcom-som.dtsi"
+#include "imx6q.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-pdk2.dtsi"
/ {
- model = "Freescale i.MX6 Quad DHCOM Premium Developer Kit (2)";
- compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som", "fsl,imx6q";
-
- chosen {
- stdout-path = &uart1;
- };
-
- clk_ext_audio_codec: clock-codec {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- };
-
- display_bl: display-bl {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
- default-brightness-level = <8>;
- enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-
- lcd_display: disp0 {
- compatible = "fsl,imx-parallel-display";
- #address-cells = <1>;
- #size-cells = <0>;
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu1_lcdif>;
- status = "okay";
-
- port@0 {
- reg = <0>;
-
- lcd_display_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- lcd_display_out: endpoint {
- remote-endpoint = <&lcd_panel_in>;
- };
- };
- };
-
- panel {
- compatible = "edt,etm0700g0edh6";
- ddc-i2c-bus = <&i2c2>;
- backlight = <&display_bl>;
-
- port {
- lcd_panel_in: endpoint {
- remote-endpoint = <&lcd_display_out>;
- };
- };
- };
-
- sound {
- compatible = "fsl,imx-audio-sgtl5000";
- model = "imx-sgtl5000";
- ssi-controller = <&ssi1>;
- audio-codec = <&sgtl5000>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "LINE_IN", "Line In Jack",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
- mux-ext-port = <3>;
- };
-};
-
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_ext>;
- status = "okay";
-};
-
-&can1 {
- status = "okay";
-};
-
-&can2 {
- status = "disabled";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c2>;
- status = "okay";
-};
-
-&i2c2 {
- sgtl5000: codec@a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- #sound-dai-cells = <0>;
- clocks = <&clk_ext_audio_codec>;
- VDDA-supply = <®_3p3v>;
- VDDIO-supply = <&sw2_reg>;
- };
-
- touchscreen@38 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_touchscreen>;
- compatible = "edt,edt-ft5406";
- reg = <0x38>;
- interrupt-parent = <&gpio4>;
- interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
- };
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>;
-
- pinctrl_hog: hog-grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x400120b0
- MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0
- MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0
- MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0
- MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0
- MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0
- MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0
- MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0
- MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x400120b0
- MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x400120b0
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x400120b0
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x400120b0
- MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x400120b0
- MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x400120b0
- MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x400120b0
- MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x400120b0
- MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x400120b0
- MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x400120b0
- MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x400120b0
- MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x400120b0
- MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x400120b0
- MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x400120b0
- >;
- };
-
- pinctrl_audmux_ext: audmux-ext-grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
- MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
- MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
- MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
- >;
- };
-
- pinctrl_enet_1G: enet-1G-grp {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x000b0
- MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x000b1
- MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x000b1
- >;
- };
-
- pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
- fsl,pins = <
- MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38
- MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38
- MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38
- MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38
- MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38
- MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38
- MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38
- MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38
- MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38
- MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38
- MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38
- MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38
- MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38
- MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38
- MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38
- MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38
- MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38
- MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38
- MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38
- MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38
- MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38
- MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38
- MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38
- MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38
- MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38
- MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38
- MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38
- MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38
- MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0
- >;
- };
-
- pinctrl_pwm1: pwm1-grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
- >;
- };
-
- pinctrl_touchscreen: touchscreen-grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b1
- >;
- };
-
- pinctrl_pcie: pcie-grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1
- >;
- };
-};
-
-&ipu1_di0_disp0 {
- remote-endpoint = <&lcd_display_in>;
-};
-
-&pcie {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcie>;
- reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&pwm1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1>;
- status = "okay";
-};
-
-&ssi1 {
- status = "okay";
+ model = "DH electronics i.MX6Q DHCOM on Premium Developer Kit (2)";
+ compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som",
+ "fsl,imx6q";
};
&sata {
status = "okay";
};
-
-&usdhc3 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+)
-/*
- * Copyright (C) 2015 DH electronics GmbH
- * Copyright (C) 2018 Marek Vasut <marex@denx.de>
- */
-
-#include "imx6q.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- aliases {
- i2c0 = &i2c2;
- i2c1 = &i2c1;
- i2c2 = &i2c3;
- mmc0 = &usdhc2;
- mmc1 = &usdhc3;
- mmc2 = &usdhc4;
- mmc3 = &usdhc1;
- rtc0 = &rtc_i2c;
- rtc1 = &snvs_rtc;
- serial0 = &uart1;
- serial1 = &uart5;
- serial2 = &uart4;
- serial3 = &uart2;
- serial4 = &uart3;
- };
-
- memory@10000000 {
- device_type = "memory";
- reg = <0x10000000 0x40000000>;
- };
-
- reg_eth_vio: regulator-eth-vio {
- compatible = "regulator-fixed";
- gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&pinctrl_enet_vio>;
- pinctrl-names = "default";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "eth_vio";
- vin-supply = <&sw2_reg>;
- };
-
- reg_usb_otg_vbus: regulator-usb-otg-vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_usb_h1_vbus: regulator-usb-h1-vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_3p3v: regulator-3P3V {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1>;
-};
-
-&can2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2>;
-};
-
-&ecspi1 {
- cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1>;
- status = "okay";
-
- flash@0 { /* S25FL116K */
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- reg = <0>;
- m25p,fast-read;
- };
-};
-
-&ecspi2 {
- cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi2>;
- status = "okay";
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_100M>;
- phy-mode = "rmii";
- phy-handle = <ðphy0>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */
- reg = <0>;
- max-speed = <100>;
- reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
- reset-assert-us = <1000>;
- reset-deassert-us = <1000>;
- smsc,disable-energy-detect; /* Make plugin detection reliable */
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c1>;
- pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- status = "okay";
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c2>;
- pinctrl-1 = <&pinctrl_i2c2_gpio>;
- scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- status = "okay";
-};
-
-&i2c3 {
- clock-frequency = <100000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c3>;
- pinctrl-1 = <&pinctrl_i2c3_gpio>;
- scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- status = "okay";
-
- ltc3676: pmic@3c {
- compatible = "lltc,ltc3676";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic_hw300>;
- reg = <0x3c>;
- interrupt-parent = <&gpio5>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-
- regulators {
- sw1_reg: sw1 {
- regulator-min-microvolt = <787500>;
- regulator-max-microvolt = <1527272>;
- lltc,fb-voltage-divider = <100000 110000>;
- regulator-suspend-mem-microvolt = <1040000>;
- regulator-ramp-delay = <7000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw2_reg: sw2 {
- regulator-min-microvolt = <1885714>;
- regulator-max-microvolt = <3657142>;
- lltc,fb-voltage-divider = <100000 28000>;
- regulator-ramp-delay = <7000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw3_reg: sw3 {
- regulator-min-microvolt = <787500>;
- regulator-max-microvolt = <1527272>;
- lltc,fb-voltage-divider = <100000 110000>;
- regulator-suspend-mem-microvolt = <980000>;
- regulator-ramp-delay = <7000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw4_reg: sw4 {
- regulator-min-microvolt = <855571>;
- regulator-max-microvolt = <1659291>;
- lltc,fb-voltage-divider = <100000 93100>;
- regulator-ramp-delay = <7000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1_reg: ldo1 {
- regulator-min-microvolt = <3240306>;
- regulator-max-microvolt = <3240306>;
- lltc,fb-voltage-divider = <102000 29400>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: ldo2 {
- regulator-min-microvolt = <2484708>;
- regulator-max-microvolt = <2484708>;
- lltc,fb-voltage-divider = <100000 41200>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-
- touchscreen@49 { /* TSC2004 */
- compatible = "ti,tsc2004";
- reg = <0x49>;
- vio-supply = <®_3p3v>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_tsc2004_hw300>;
- interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
- status = "disabled";
- };
-
- eeprom@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- pagesize = <16>;
- };
-
- rtc_i2c: rtc@56 {
- compatible = "microcrystal,rv3029";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_rtc_hw300>;
- reg = <0x56>;
- interrupt-parent = <&gpio7>;
- interrupts = <12 2>;
- };
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog_base>;
-
- pinctrl_hog_base: hog-base-grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x120b0
- MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x120b0
- MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x120b0
- MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x120b0
- MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x120b0
- >;
- };
-
- pinctrl_ecspi1: ecspi1-grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
- MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
- MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
- MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
- MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
- >;
- };
-
- pinctrl_ecspi2: ecspi2-grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1
- MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1
- MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1
- MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x1b0b0
- >;
- };
-
- pinctrl_enet_100M: enet-100M-grp {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
- MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
- MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
- MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
- MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
- MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
- MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x000b0
- MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b1
- >;
- };
-
- pinctrl_enet_vio: enet-vio-grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x120b0
- >;
- };
-
- pinctrl_flexcan1: flexcan1-grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
- MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
- >;
- };
-
- pinctrl_flexcan2: flexcan2-grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
- MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
- >;
- };
-
- pinctrl_i2c1: i2c1-grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c1_gpio: i2c1-gpio-grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
- MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
- >;
- };
-
- pinctrl_i2c2: i2c2-grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c2_gpio: i2c2-gpio-grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
- >;
- };
-
- pinctrl_i2c3: i2c3-grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c3_gpio: i2c3-gpio-grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
- MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
- >;
- };
-
- pinctrl_pmic_hw300: pmic-hw300-grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1B0B0
- >;
- };
-
- pinctrl_rtc_hw300: rtc-hw300-grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x120B0
- >;
- };
-
- pinctrl_tsc2004_hw300: tsc2004-hw300-grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x120B0
- >;
- };
-
- pinctrl_uart1: uart1-grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
- MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x4001b0b1
- MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x4001b0b1
- MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x4001b0b1
- MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x4001b0b1
- MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x4001b0b1
- >;
- };
-
- pinctrl_uart4: uart4-grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
- MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
- >;
- };
-
- pinctrl_uart5: uart5-grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
- MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
- MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
- MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x4001b0b1
- >;
- };
-
- pinctrl_usbh1: usbh1-grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x120B0
- >;
- };
-
- pinctrl_usbotg: usbotg-grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
- >;
- };
-
- pinctrl_usdhc2: usdhc2-grp {
- fsl,pins = <
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x120B0
- >;
- };
-
- pinctrl_usdhc3: usdhc3-grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x120B0
- >;
- };
-
- pinctrl_usdhc4: usdhc4-grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
- MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
- MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
- MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
- MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
- MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
- MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
- MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
- MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
- MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
- >;
- };
-};
-
-®_arm {
- vin-supply = <&sw3_reg>;
-};
-
-®_soc {
- vin-supply = <&sw1_reg>;
-};
-
-®_pu {
- vin-supply = <&sw1_reg>;
-};
-
-®_vdd1p1 {
- vin-supply = <&sw2_reg>;
-};
-
-®_vdd2p5 {
- vin-supply = <&sw2_reg>;
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- uart-has-rtscts;
- dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
- dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
- dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
- rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4>;
- status = "okay";
-};
-
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5>;
- uart-has-rtscts;
- status = "okay";
-};
-
-&usbh1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh1>;
- vbus-supply = <®_usb_h1_vbus>;
- dr_mode = "host";
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg>;
- disable-over-current;
- dr_mode = "otg";
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
- keep-power-in-suspend;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
- fsl,wp-controller;
- keep-power-in-suspend;
- status = "disabled";
-};
-
-&usdhc4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc4>;
- non-removable;
- bus-width = <8>;
- no-1-8-v;
- keep-power-in-suspend;
- status = "okay";
-};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+ model = "SKOV IMX6 CPU QuadCore";
+ compatible = "skov,imx6q-skov-revc-lt2", "fsl,imx6q";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ /* internal 22 k pull up required */
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001f878
+ /* internal 22 k pull up required */
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001f878
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+ model = "SKOV IMX6 CPU QuadCore";
+ compatible = "skov,imx6q-skov-revc-lt6", "fsl,imx6q";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+ pwms = <&pwm2 0 20000 0>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <17>;
+ default-brightness-level = <8>;
+ power-supply = <®_24v0>;
+ };
+
+ display {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "fsl,imx-parallel-display";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1>;
+
+ port@0 {
+ reg = <0>;
+
+ display0_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ display0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ panel {
+ compatible = "logictechno,lttd800480070-l6wh-rt";
+ backlight = <&backlight>;
+ power-supply = <®_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display0_out>;
+ };
+ };
+ };
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+ pinctrl_backlight: backlightgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x58
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ /* internal 22 k pull up required */
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001F878
+ /* internal 22 k pull up required */
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001F878
+ >;
+ };
+
+ pinctrl_ipu1: ipu1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+
+/ {
+ model = "SKOV IMX6 CPU QuadCore";
+ compatible = "skov,imx6q-skov-reve-mi1010ait-1cp1", "fsl,imx6q";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+ pwms = <&pwm2 0 20000 0>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <17>;
+ default-brightness-level = <8>;
+ power-supply = <®_24v0>;
+ };
+
+ panel {
+ compatible = "multi-inno,mi1010ait-1cp";
+ backlight = <&backlight>;
+ power-supply = <®_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+ <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touchscreen>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <1280>;
+ touchscreen-size-y = <800>;
+ wakeup-source;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_backlight: backlightgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x58
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ /* external 1 k pull up */
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x40010878
+ /* external 1 k pull up */
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x40010878
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ /* internal 22 k pull up required */
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001F878
+ /* internal 22 k pull up required */
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001F878
+ >;
+ };
+
+ pinctrl_touchscreen: touchscreengrp {
+ fsl,pins = <
+ /* external 10 k pull up */
+ /* CTP_INT */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0
+ /* CTP_RST */
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0
+ >;
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-solidsense.dtsi"
+
+/ {
+ model = "SolidRun SolidSense Dual/Quad (1.5som+emmc)";
+ compatible = "solidrun,solidsense/q", "fsl,imx6q";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ */
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+/*
+ * Special SoM hardware required which uses the pins from micro SD card. The
+ * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can2
+ * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. Therefore the micro SD
+ * card must be disabled and the uart1 rts/cts must be output on other DHCOM
+ * pins, see uart1 and usdhc3 node below.
+ */
+&can2 {
+ status = "okay";
+};
+
+&gpio1 {
+ /*
+ * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+ * GPIO line, however the i.MX6 UART driver assumes RX happens
+ * during TX anyway and that it only controls drive enable DE
+ * line. Hence, the RX is always enabled here.
+ */
+ rs485-rx-en-hog {
+ gpio-hog;
+ gpios = <18 0>; /* GPIO Q */
+ line-name = "rs485-rx-en";
+ output-low;
+ };
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "DRC02-In1", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "DHCOM-E", "DRC02-In2", "DHCOM-H",
+ "DHCOM-I", "DRC02-HW0", "", "", "", "", "", "",
+ "", "", "", "", "DRC02-Out1", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+ gpio-line-names =
+ "", "", "", "DRC02-Out2", "", "", "SOM-HW1", "",
+ "", "", "", "", "", "", "DRC02-HW2", "DRC02-HW1",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&uart1 {
+ /*
+ * Due to the use of can2 the signals for can2 Tx and Rx are routed to
+ * DHCOM UART1 rts/cts pins. Therefore this UART have to use DHCOM GPIOs
+ * for rts/cts. So configure DHCOM GPIO I as rts and GPIO M as cts.
+ */
+ /delete-property/ uart-has-rtscts;
+ cts-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; /* GPIO M */
+ pinctrl-0 = <&pinctrl_uart1 &pinctrl_dhcom_i &pinctrl_dhcom_m>;
+ pinctrl-names = "default";
+ rts-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+};
+
+&uart5 {
+ /*
+ * On DRC02 this UART is used as RS485 interface and RS485_TX_En is
+ * controlled by DHCOM GPIO P. So remove rts/cts pins and the property
+ * uart-has-rtscts from this UART and add the DHCOM GPIO P pin via
+ * rts-gpios. The RS485_RX_En is controlled by DHCOM GPIO Q, see gpio1
+ * node above.
+ */
+ /delete-property/ uart-has-rtscts;
+ linux,rs485-enabled-at-boot-time;
+ pinctrl-0 = <&pinctrl_uart5_core &pinctrl_dhcom_p &pinctrl_dhcom_q>;
+ pinctrl-names = "default";
+ rts-gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; /* GPIO P */
+};
+
+&usdhc2 { /* SD card */
+ status = "okay";
+};
+
+&usdhc3 {
+ /*
+ * Due to the use of can2 the micro SD card on module have to be
+ * disabled, because the pins SD3_DAT0 and SD3_DAT1 are muxed as
+ * can2 Tx and Rx.
+ */
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-0 = <
+ /*
+ * The following DHCOM GPIOs are used on this board.
+ * Therefore, they have been removed from the list below.
+ * I: uart1 rts
+ * M: uart1 cts
+ * P: uart5 rs485-tx-en
+ * Q: uart5 rs485-rx-en
+ */
+ &pinctrl_hog_base
+ &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+ &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+ &pinctrl_dhcom_g &pinctrl_dhcom_h
+ &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+ &pinctrl_dhcom_n &pinctrl_dhcom_o
+ &pinctrl_dhcom_r
+ &pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+ &pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+ >;
+ pinctrl-names = "default";
+
+ pinctrl_uart5_core: uart5-core-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2021 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ clk_ext_audio_codec: clock-codec {
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ compatible = "fixed-clock";
+ };
+
+ display_bl: display-bl {
+ brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+ compatible = "pwm-backlight";
+ default-brightness-level = <8>;
+ enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
+ pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
+ status = "okay";
+ };
+
+ lcd_display: disp0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-0 = <&pinctrl_ipu1_lcdif &pinctrl_dhcom_g>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ gpio-keys {
+ #size-cells = <0>;
+ compatible = "gpio-keys";
+
+ button-0 {
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* GPIO A */
+ label = "TA1-GPIO-A";
+ linux,code = <KEY_A>;
+ pinctrl-0 = <&pinctrl_dhcom_a>;
+ pinctrl-names = "default";
+ wakeup-source;
+ };
+
+ button-1 {
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* GPIO B */
+ label = "TA2-GPIO-B";
+ linux,code = <KEY_B>;
+ pinctrl-0 = <&pinctrl_dhcom_b>;
+ pinctrl-names = "default";
+ wakeup-source;
+ };
+
+ button-2 {
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; /* GPIO C */
+ label = "TA3-GPIO-C";
+ linux,code = <KEY_C>;
+ pinctrl-0 = <&pinctrl_dhcom_c>;
+ pinctrl-names = "default";
+ wakeup-source;
+ };
+
+ button-3 {
+ gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; /* GPIO D */
+ label = "TA4-GPIO-D";
+ linux,code = <KEY_D>;
+ pinctrl-0 = <&pinctrl_dhcom_d>;
+ pinctrl-names = "default";
+ wakeup-source;
+ };
+ };
+
+ led {
+ compatible = "gpio-leds";
+
+ /*
+ * Disable led-5, because GPIO E is
+ * already used as touch interrupt.
+ */
+ led-5 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* GPIO E */
+ pinctrl-0 = <&pinctrl_dhcom_e>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ led-6 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; /* GPIO F */
+ pinctrl-0 = <&pinctrl_dhcom_f>;
+ pinctrl-names = "default";
+ };
+
+ led-7 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* GPIO H */
+ pinctrl-0 = <&pinctrl_dhcom_h>;
+ pinctrl-names = "default";
+ };
+
+ led-8 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+ pinctrl-0 = <&pinctrl_dhcom_i>;
+ pinctrl-names = "default";
+ };
+ };
+
+ panel {
+ backlight = <&display_bl>;
+ compatible = "edt,etm0700g0edh6";
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ sound {
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT";
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx-sgtl5000";
+ mux-ext-port = <3>;
+ mux-int-port = <1>;
+ ssi-controller = <&ssi1>;
+ };
+};
+
+&audmux {
+ pinctrl-0 = <&pinctrl_audmux_ext>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&can2 {
+ status = "disabled";
+};
+
+/* 1G ethernet */
+/delete-node/ ðphy0;
+&fec {
+ phy-mode = "rgmii";
+ phy-handle = <ðphy7>;
+ pinctrl-0 = <&pinctrl_enet_1G>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy7: ethernet-phy@7 { /* KSZ 9021 */
+ compatible = "ethernet-phy-ieee802.3-c22";
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&pinctrl_ethphy7>;
+ pinctrl-names = "default";
+ reg = <7>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ rxdv-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ txen-skew-ps = <0>;
+ };
+ };
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c2 {
+ sgtl5000: codec@a {
+ #sound-dai-cells = <0>;
+ clocks = <&clk_ext_audio_codec>;
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <&sw2_reg>;
+ };
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5406";
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+ pinctrl-0 = <&pinctrl_dhcom_e>;
+ pinctrl-names = "default";
+ reg = <0x38>;
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&pcie {
+ pinctrl-0 = <&pinctrl_pcie &pinctrl_dhcom_j>;
+ reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; /* GPIO J */
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&usdhc2 { /* SD card */
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-0 = <
+ /*
+ * The following DHCOM GPIOs are used on this board.
+ * Therefore, they have been removed from the list below.
+ * A: key TA1
+ * B: key TA2
+ * C: key TA3
+ * D: key TA4
+ * E: touchscreen
+ * F: led6
+ * G: backlight enable
+ * H: led7
+ * I: led8
+ * J: PCIe reset
+ */
+ &pinctrl_hog_base
+ &pinctrl_dhcom_k &pinctrl_dhcom_l
+ &pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+ &pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+ &pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+ &pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+ >;
+ pinctrl-names = "default";
+
+ pinctrl_audmux_ext: audmux-ext-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ >;
+ };
+
+ pinctrl_enet_1G: enet-1G-grp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ >;
+ };
+
+ pinctrl_ethphy7: ethphy7-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__GPIO3_IO26 0xb1 /* WOL */
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0xb0 /* Reset */
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0xb1 /* Int */
+ >;
+ };
+
+ pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ led {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_YELLOW>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+ pinctrl-0 = <&pinctrl_dhcom_i>;
+ pinctrl-names = "default";
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names =
+ "", "", "DHCOM-A", "", "DHCOM-B", "PicoITX-In2", "", "",
+ "", "", "", "", "", "", "", "",
+ "DHCOM-R", "DHCOM-S", "DHCOM-Q", "DHCOM-T", "DHCOM-U", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "PicoITX-In1", "DHCOM-INT", "DHCOM-H",
+ "DHCOM-I", "PicoITX-HW2", "", "", "", "", "", "",
+ "", "", "", "", "PicoITX-Out1", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+ gpio-line-names =
+ "", "", "", "PicoITX-Out2", "", "", "SOM-HW1", "",
+ "", "", "", "", "", "", "PicoITX-HW0", "PicoITX-HW1",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&iomuxc {
+ pinctrl-0 = <
+ /*
+ * The following DHCOM GPIOs are used on this board.
+ * Therefore, they have been removed from the list below.
+ * I: yellow led
+ */
+ &pinctrl_hog_base
+ &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+ &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+ &pinctrl_dhcom_g &pinctrl_dhcom_h
+ &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+ &pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+ &pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+ &pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+ &pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+ >;
+ pinctrl-names = "default";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2021 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ i2c0 = &i2c2;
+ i2c1 = &i2c1;
+ i2c2 = &i2c3;
+ mmc0 = &usdhc2;
+ mmc1 = &usdhc3;
+ mmc2 = &usdhc4;
+ mmc3 = &usdhc1;
+ rtc0 = &rtc_i2c;
+ rtc1 = &snvs_rtc;
+ serial0 = &uart1;
+ serial1 = &uart5;
+ serial2 = &uart4;
+ serial3 = &uart2;
+ serial4 = &uart3;
+ };
+
+ memory@10000000 { /* Appropriate memory size will be filled by U-Boot */
+ device_type = "memory";
+ reg = <0x10000000 0x20000000>;
+ };
+
+ reg_3p3v: regulator-3P3V {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "3P3V";
+ };
+
+ reg_eth_vio: regulator-eth-vio {
+ compatible = "regulator-fixed";
+ gpio = <&gpio1 7 0>;
+ pinctrl-0 = <&pinctrl_enet_vio>;
+ pinctrl-names = "default";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "eth_vio";
+ vin-supply = <&sw2_reg>;
+ };
+
+ /* OE pin of the latch is low active */
+ reg_latch_oe_on: regulator-latch-oe-on {
+ compatible = "regulator-fixed";
+ gpio = <&gpio3 22 0>;
+ regulator-always-on;
+ regulator-name = "latch_oe_on";
+ };
+
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 31 0>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "usb_h1_vbus";
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "usb_otg_vbus";
+ };
+};
+
+&can1 {
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+/*
+ * Special SoM hardware required which uses the pins from micro SD card. The
+ * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can2
+ * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. So to enable can2 on
+ * the board device tree file, the micro SD card must be disabled and the uart1
+ * rts/cts must be disabled or output on other DHCOM pins.
+ */
+&can2 {
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ pinctrl-names = "default";
+ status = "disabled";
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ flash@0 { /* S25FL116K */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ m25p,fast-read;
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&ecspi2 {
+ cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ pinctrl-names = "default";
+ status = "disabled";
+};
+
+&fec {
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ pinctrl-0 = <&pinctrl_enet_100M>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */
+ compatible = "ethernet-phy-ieee802.3-c22";
+ interrupt-parent = <&gpio4>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&pinctrl_ethphy0>;
+ pinctrl-names = "default";
+ reg = <0>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ smsc,disable-energy-detect; /* Make plugin detection reliable */
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names =
+ "", "", "DHCOM-A", "", "DHCOM-B", "DHCOM-C", "", "",
+ "", "", "", "", "", "", "", "",
+ "DHCOM-R", "DHCOM-S", "DHCOM-Q", "DHCOM-T", "DHCOM-U", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "SOM-HW2", "", "", "SOM-HW0", "", "SOM-MEM1", "SOM-MEM0", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "DHCOM-G", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "DHCOM-E", "DHCOM-INT", "DHCOM-H",
+ "DHCOM-I", "DHCOM-L", "", "", "", "", "", "",
+ "", "", "", "", "DHCOM-F", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "DHCOM-V", "DHCOM-W", "", "DHCOM-O", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+ gpio-line-names =
+ "", "", "", "DHCOM-D", "", "", "SOM-HW1", "",
+ "", "", "", "", "", "", "DHCOM-J", "DHCOM-K",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+ gpio-line-names =
+ "DHCOM-M", "DHCOM-N", "", "", "", "", "", "",
+ "", "", "", "", "", "DHCOM-P", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+ /*
+ * Info: According to erratum ERR007805 clock frequency limit is 375000.
+ * The erratum for i.MX6S/DL is here [1] and for i.MX6Q/D is here [2].
+ * [1] https://www.nxp.com/docs/en/errata/IMX6SDLCE.pdf
+ * [2] https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+ */
+ clock-frequency = <100000>;
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ pinctrl-names = "default", "gpio";
+ scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c2 {
+ /* Info: Clock frequency limit is 375000 (for details see i2c1) */
+ clock-frequency = <100000>;
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ pinctrl-names = "default", "gpio";
+ scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c3 {
+ /* Info: Clock frequency limit is 375000 (for details see i2c1) */
+ clock-frequency = <100000>;
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ pinctrl-names = "default", "gpio";
+ scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ ltc3676: pmic@3c {
+ compatible = "lltc,ltc3676";
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-0 = <&pinctrl_pmic>;
+ pinctrl-names = "default";
+ reg = <0x3c>;
+
+ regulators {
+ sw1_reg: sw1 {
+ lltc,fb-voltage-divider = <100000 110000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1527272>;
+ regulator-min-microvolt = <787500>;
+ regulator-ramp-delay = <7000>;
+ regulator-suspend-mem-microvolt = <1040000>;
+ };
+
+ sw2_reg: sw2 {
+ lltc,fb-voltage-divider = <100000 28000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3657142>;
+ regulator-min-microvolt = <1885714>;
+ regulator-ramp-delay = <7000>;
+ };
+
+ sw3_reg: sw3 {
+ lltc,fb-voltage-divider = <100000 110000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1527272>;
+ regulator-min-microvolt = <787500>;
+ regulator-ramp-delay = <7000>;
+ regulator-suspend-mem-microvolt = <980000>;
+ };
+
+ sw4_reg: sw4 {
+ lltc,fb-voltage-divider = <100000 93100>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1659291>;
+ regulator-min-microvolt = <855571>;
+ regulator-ramp-delay = <7000>;
+ };
+
+ ldo1_reg: ldo1 {
+ lltc,fb-voltage-divider = <102000 29400>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3240306>;
+ regulator-min-microvolt = <3240306>;
+ };
+
+ ldo2_reg: ldo2 {
+ lltc,fb-voltage-divider = <100000 41200>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <2484708>;
+ regulator-min-microvolt = <2484708>;
+ };
+ };
+ };
+
+ touchscreen@49 { /* TSC2004 */
+ compatible = "ti,tsc2004";
+ interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-0 = <&pinctrl_tsc2004>;
+ pinctrl-names = "default";
+ reg = <0x49>;
+ vio-supply = <®_3p3v>;
+ status = "disabled";
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+
+ rtc_i2c: rtc@56 {
+ compatible = "microcrystal,rv3029";
+ interrupt-parent = <&gpio7>;
+ interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-0 = <&pinctrl_rtc>;
+ pinctrl-names = "default";
+ reg = <0x56>;
+ };
+};
+
+&pcie {
+ pinctrl-0 = <&pinctrl_pcie>;
+ pinctrl-names = "default";
+};
+
+&pwm1 {
+ pinctrl-0 = <&pinctrl_pwm1>;
+ pinctrl-names = "default";
+};
+
+®_arm {
+ vin-supply = <&sw3_reg>;
+};
+
+®_pu {
+ vin-supply = <&sw1_reg>;
+};
+
+®_soc {
+ vin-supply = <&sw1_reg>;
+};
+
+®_vdd1p1 {
+ vin-supply = <&sw2_reg>;
+};
+
+®_vdd2p5 {
+ vin-supply = <&sw2_reg>;
+};
+
+&uart1 { /* DHCOM UART1 */
+ dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 { /* DHCOM UART3 */
+ pinctrl-0 = <&pinctrl_uart4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart5 { /* DHCOM UART2 */
+ pinctrl-0 = <&pinctrl_uart5>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh1 {
+ dr_mode = "host";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ pinctrl-names = "default";
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ disable-over-current;
+ dr_mode = "otg";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ pinctrl-names = "default";
+ vbus-supply = <®_usb_otg_vbus>;
+ status = "okay";
+};
+
+&usdhc2 { /* External SD card via DHCOM */
+ cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ keep-power-in-suspend;
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-names = "default";
+ status = "disabled";
+};
+
+&usdhc3 { /* Micro SD card on module */
+ cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+ fsl,wp-controller;
+ keep-power-in-suspend;
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usdhc4 { /* eMMC on module */
+ bus-width = <8>;
+ keep-power-in-suspend;
+ no-1-8-v;
+ non-removable;
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&weim {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ fsl,weim-cs-gpr = <&gpr>;
+ pinctrl-0 = <&pinctrl_weim &pinctrl_weim_cs0 &pinctrl_weim_cs1>;
+ pinctrl-names = "default";
+ /* It is necessary to setup 2x 64MB otherwise setting gpr fails */
+ ranges = <0 0 0x08000000 0x04000000>, /* CS0 */
+ <1 0 0x0c000000 0x04000000>; /* CS1 */
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-0 = <
+ &pinctrl_hog_base
+ &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+ &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+ &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
+ &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+ &pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+ &pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+ &pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+ &pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+ >;
+ pinctrl-names = "default";
+
+ pinctrl_hog_base: hog-base-grp {
+ fsl,pins = <
+ /* GPIOs for memory coding */
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x120b0
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x120b0
+ /* GPIOs for hardware coding */
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x120b0
+ MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x120b0
+ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x120b0
+ >;
+ };
+
+ /* DHCOM GPIOs */
+ pinctrl_dhcom_a: dhcom-a-grp {
+ fsl,pins = <MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x400120b0>;
+ };
+
+ pinctrl_dhcom_b: dhcom-b-grp {
+ fsl,pins = <MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0>;
+ };
+
+ pinctrl_dhcom_c: dhcom-c-grp {
+ fsl,pins = <MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0>;
+ };
+
+ pinctrl_dhcom_d: dhcom-d-grp {
+ fsl,pins = <MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0>;
+ };
+
+ pinctrl_dhcom_e: dhcom-e-grp {
+ fsl,pins = <MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x400120b0>;
+ };
+
+ pinctrl_dhcom_f: dhcom-f-grp {
+ fsl,pins = <MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0>;
+ };
+
+ pinctrl_dhcom_g: dhcom-g-grp {
+ fsl,pins = <MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400120b0>;
+ };
+
+ pinctrl_dhcom_h: dhcom-h-grp {
+ fsl,pins = <MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x400120b0>;
+ };
+
+ pinctrl_dhcom_i: dhcom-i-grp {
+ fsl,pins = <MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0>;
+ };
+
+ pinctrl_dhcom_j: dhcom-j-grp {
+ fsl,pins = <MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0>;
+ };
+
+ pinctrl_dhcom_k: dhcom-k-grp {
+ fsl,pins = <MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x400120b0>;
+ };
+
+ pinctrl_dhcom_l: dhcom-l-grp {
+ fsl,pins = <MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x400120b0>;
+ };
+
+ pinctrl_dhcom_m: dhcom-m-grp {
+ fsl,pins = <MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x400120b0>;
+ };
+
+ pinctrl_dhcom_n: dhcom-n-grp {
+ fsl,pins = <MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x400120b0>;
+ };
+
+ pinctrl_dhcom_o: dhcom-o-grp {
+ fsl,pins = <MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x400120b0>;
+ };
+
+ pinctrl_dhcom_p: dhcom-p-grp {
+ fsl,pins = <MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x400120b0>;
+ };
+
+ pinctrl_dhcom_q: dhcom-q-grp {
+ fsl,pins = <MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x400120b0>;
+ };
+
+ pinctrl_dhcom_r: dhcom-r-grp {
+ fsl,pins = <MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x400120b0>;
+ };
+
+ pinctrl_dhcom_s: dhcom-s-grp {
+ fsl,pins = <MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x400120b0>;
+ };
+
+ pinctrl_dhcom_t: dhcom-t-grp {
+ fsl,pins = <MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x400120b0>;
+ };
+
+ pinctrl_dhcom_u: dhcom-u-grp {
+ fsl,pins = <MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x400120b0>;
+ };
+
+ pinctrl_dhcom_v: dhcom-v-grp {
+ fsl,pins = <MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x400120b0>;
+ };
+
+ pinctrl_dhcom_w: dhcom-w-grp {
+ fsl,pins = <MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x400120b0>;
+ };
+
+ pinctrl_dhcom_int: dhcom-int-grp {
+ fsl,pins = <MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x400120b0>;
+ };
+
+ pinctrl_ecspi1: ecspi1-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x1b0b0
+ >;
+ };
+
+ pinctrl_enet_100M: enet-100M-grp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_enet_vio: enet-vio-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x120b0
+ >;
+ };
+
+ pinctrl_ethphy0: ethphy0-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0xb0 /* Reset */
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0xb1 /* Int */
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2-grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2-grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2-gpio-grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3-gpio-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pcie: pcie-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 /* Wake */
+ >;
+ };
+
+ pinctrl_pmic: pmic-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1-grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_rtc: rtc-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x120b0
+ >;
+ };
+
+ pinctrl_tsc2004: tsc2004-grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x120b0
+ >;
+ };
+
+ pinctrl_uart1: uart1-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x4001b0b1
+ MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x4001b0b1
+ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x4001b0b1
+ MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x4001b0b1
+ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x4001b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x4001b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x120b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotg-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2-grp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x120b0
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3-grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x120b0
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4-grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_weim: weim-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0a6
+ MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0a6
+ MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0a6
+ MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0a6
+ MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0a6
+ MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0a6
+ MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0a6
+ MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0a6
+ MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0a6
+ MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0a6
+ MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0a6
+ MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0a6
+ MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0a6
+ MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0a6
+ MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0a6
+ MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0a6
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0
+ MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb060 /* LE */
+ MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0a6
+ MX6QDL_PAD_EIM_RW__EIM_RW 0xb0a6 /* WE */
+ >;
+ };
+
+ pinctrl_weim_cs0: weim-cs0-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
+ >;
+ };
+
+ pinctrl_weim_cs1: weim-cs1-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1
+ >;
+ };
+};
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x17059
>;
};
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x17059
>;
};
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x17059
>;
};
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x17059
>;
};
};
};
+ crypto@60 {
+ compatible = "atmel,atecc508a";
+ reg = <0x60>;
+ };
+
imu@6a {
compatible = "st,lsm9ds1-imu";
reg = <0x6a>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+&ecspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi4>;
+ cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ touchscreen@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch>;
+ compatible = "ti,tsc2046";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
+ vcc-supply = <®_3v3>;
+ pendown-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ ti,x-plate-ohms = /bits/ 16 <850>;
+ ti,y-plate-ohms = /bits/ 16 <295>;
+ ti,pressure-min = /bits/ 16 <2>;
+ ti,pressure-max = /bits/ 16 <1500>;
+ ti,vref-mv = /bits/ 16 <3300>;
+ ti,settle-delay-usec = /bits/ 16 <15>;
+ ti,vref-delay-usecs = /bits/ 16 <0>;
+ ti,penirq-recheck-delay-usecs = /bits/ 16 <100>;
+ ti,debounce-max = /bits/ 16 <100>;
+ ti,debounce-tol = /bits/ 16 <(~0)>;
+ ti,debounce-rep = /bits/ 16 <4>;
+ touchscreen-swapped-x-y;
+ touchscreen-inverted-y;
+ wakeup-source;
+ };
+};
+
+&iomuxc {
+ pinctrl_ecspi4: ecspi4grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x000b1
+ MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x000b1
+ /* *no* external pull up */
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x40000058
+ >;
+ };
+
+ pinctrl_touch: touchgrp {
+ fsl,pins = <
+ /* external pull up */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x10040
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ aliases {
+ can0 = &can1;
+ can1 = &can2;
+ mdio-gpio0 = &mdio;
+ nand = &gpmi;
+ rtc0 = &i2c_rtc;
+ rtc1 = &snvs;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, /* 24V */
+ <&adc 1>; /* temperature */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "D1";
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_STATUS;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "D2";
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-2 {
+ label = "D3";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ mdio: mdio {
+ compatible = "microchip,mdio-smi0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mdio>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>,
+ <&gpio1 22 GPIO_ACTIVE_HIGH>;
+
+ switch@0 {
+ compatible = "microchip,ksz8873";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_switch>;
+ interrupt-parent = <&gpio3>;
+ interrupt = <30 IRQ_TYPE_LEVEL_HIGH>;
+ reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ reg = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports@0 {
+ reg = <0>;
+ phy-mode = "internal";
+ label = "lan1";
+ };
+
+ ports@1 {
+ reg = <1>;
+ phy-mode = "internal";
+ label = "lan2";
+ };
+
+ ports@2 {
+ reg = <2>;
+ label = "cpu";
+ ethernet = <&fec>;
+ phy-mode = "rmii";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ };
+
+ clk50m_phy: phy-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ vin-supply = <®_5v0>;
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_24v0: regulator-24v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "24v0";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ };
+
+ reg_can1_stby: regulator-can1-stby {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_stby>;
+ regulator-name = "can1-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_can2_stby: regulator-can2-stby {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2_stby>;
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_vcc_mmc: regulator-vcc-mmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_mmc>;
+ vin-supply = <®_3v3>;
+ regulator-name = "mmc_vcc_supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100>;
+ };
+
+ reg_vcc_mmc_io: regulator-vcc-mmc-io {
+ compatible = "regulator-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_mmc_io>;
+ vin-supply = <®_5v0>;
+ regulator-name = "mmc_io_supply";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ states = <1800000 0x1>, <3300000 0x0>;
+ startup-delay-us = <100>;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <®_can1_stby>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ xceiver-supply = <®_can2_stby>;
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <54000000>;
+ reg = <0>;
+ };
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ adc: adc@0 {
+ compatible = "microchip,mcp3002";
+ reg = <0>;
+ vref-supply = <®_3v3>;
+ spi-max-frequency = <1000000>;
+ #io-channel-cells = <1>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&clk50m_phy>;
+ clock-names = "ipg", "ahb", "ptp";
+ phy-mode = "rmii";
+ phy-supply = <®_3v3>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ i2c_rtc: rtc@51 {
+ compatible = "nxp,pcf85063";
+ reg = <0x51>;
+ quartz-load-femtofarads = <12500>;
+ };
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ #pwm-cells = <2>;
+ status = "okay";
+};
+
+&pwm3 {
+ /* used for LCD contrast control */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_5v0>;
+ disable-over-current;
+ status = "okay";
+};
+
+/* no usbh2 */
+&usbphynop1 {
+ status = "disabled";
+};
+
+/* no usbh3 */
+&usbphynop2 {
+ status = "disabled";
+};
+
+&usbotg {
+ vbus-supply = <®_5v0>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ cap-power-off-card;
+ full-pwr-cycle;
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ mmc-ddr-1_8v;
+ vmmc-supply = <®_vcc_mmc>;
+ vqmmc-supply = <®_vcc_mmc_io>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x3008
+ MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b000
+ >;
+ };
+
+ pinctrl_can1_stby: can1stbygrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x13008
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000
+ >;
+ };
+
+ pinctrl_can2_stby: can2stbygrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x13008
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb1
+ /* *no* external pull up */
+ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x58
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0xb1
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0xb1
+ /* external pull up */
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x58
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* RMII 50 MHz */
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x100f5
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x100f5
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x100c0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x100c0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x100f5
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x100f5
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x58
+ /* GPIO for "link active" */
+ MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x3038
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ /* external 10 k pull up */
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x40010878
+ /* external 10 k pull up */
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x40010878
+ >;
+ };
+
+ pinctrl_mdio: mdiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__GPIO1_IO22 0x100b1
+ MX6QDL_PAD_ENET_MDC__GPIO1_IO31 0xb1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__PWM2_OUT 0x58
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x58
+ >;
+ };
+
+ pinctrl_switch: switchgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0xb0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ /* SoC internal pull up required */
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ /* SoC internal pull up required */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b040
+ /* SoC internal pull up required */
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b040
+ >;
+ };
+
+ pinctrl_vcc_mmc: vccmmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x58
+ >;
+ };
+
+ pinctrl_vcc_mmc_io: vccmmciogrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x58
+ >;
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2021 Russell King <rmk@armlinux.org.uk>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/leds/common.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_solidsense_leds>;
+
+ /* Red/Green LED1 - next to WiFi SMA */
+ led-11 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <0>;
+ gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+ };
+
+ led-12 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <0>;
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Red/Green LED2 - next to GPS SMA */
+ led-21 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+ };
+
+ led-22 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&audio {
+ status = "disabled";
+};
+
+&ecspi2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_hog>, <&pinctrl_solidsense_hog>;
+
+ solidsense {
+ pinctrl_solidsense_hog: solidsense-hog {
+ fsl,pins = <
+ /* Nordic RESET_N */
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x400130b1
+ /* Nordic Chip 1 SWDIO - GPIO 125 */
+ MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x400130b1
+ /* Nordic Chip 1 SWDCLK - GPIO 59 */
+ /* already claimed in the HB2 hogs */
+ /* MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 */
+ /* Nordic Chip 2 SWDIO - GPIO 81 */
+ MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x400130b1
+ /* Nordic Chip 2 SWCLK - GPIO 82 */
+ MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x400130b1
+ >;
+ };
+
+ pinctrl_solidsense_leds: solidsense-leds {
+ fsl,pins = <
+ /* Red LED 1 - GPIO 58 */
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x400130b1
+ /* Green LED 1 - GPIO 55 */
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x400130b1
+ /* Red LED 2 - GPIO 57 */
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x400130b1
+ /* Green LED 2 - GPIO 56 */
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x400130b1
+ >;
+ };
+
+ pinctrl_solidsense_uart2: solidsense-uart2 {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_solidsense_uart3: solidsense-uart3 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+ };
+};
+
+&pwm1 {
+ status = "disabled";
+};
+
+&sgtl5000 {
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_solidsense_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_solidsense_uart3>;
+ status = "okay";
+};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
+ assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF>;
+ assigned-clock-rates = <125000000>;
status = "okay";
phy-mode = "rgmii";
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6S-C0800-R102-F0409-E-CAN2-RTC-I-01D2
+ * DHCOM PCB number: 493-400 or newer
+ * DRC02 PCB number: 568-100 or newer
+ */
+/dts-v1/;
+
+/*
+ * The kernel only distinguishes between i.MX6 Quad and DualLite,
+ * but the Solo is actually a DualLite with only one CPU. So use
+ * DualLite for the Solo and disable one CPU node.
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-drc02.dtsi"
+
+/ {
+ model = "DH electronics i.MX6S DHCOM on DRC02";
+ compatible = "dh,imx6s-dhcom-drc02", "dh,imx6s-dhcom-som",
+ "fsl,imx6dl";
+
+ cpus {
+ /delete-node/ cpu@1;
+ };
+};
device_type = "memory";
reg = <0x80000000 0x40000000>;
};
+
+ reg_brcm: regulator-brcm {
+ compatible = "regulator-fixed";
+ regulator-name = "brcm_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_brcm_reg>;
+ gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <150>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi>;
+ reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+ clock-names = "ext_clock";
+ };
};
&clks {
status = "okay";
};
+&usdhc2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ vmmc-supply = <®_brcm>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ cap-power-off-card;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc3>;
};
&iomuxc {
+ pinctrl_brcm_reg: brcmreggrp {
+ fsl,pins = <
+ /* WIFI_PWR_EN */
+ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
>;
};
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x59
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x19
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x5a
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x1a
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x5b
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x1b
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b
+ >;
+ };
+
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY 0x74
>;
};
+
+ pinctrl_wifi: wifigrp {
+ fsl,pins = <
+ /* WiFi Reg On */
+ MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x00000014
+ /* WiFi Sleep 32k */
+ MX7D_PAD_SD1_WP__CCM_CLKO2 0x00000014
+ >;
+ };
};
status = "disabled";
};
+ ftm1: pwm@30640000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ reg = <0x30640000 0x10000>;
+ #pwm-cells = <3>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER1_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ ftm2: pwm@30650000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ reg = <0x30650000 0x10000>;
+ #pwm-cells = <3>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER2_ROOT_CLK>;
+ status = "disabled";
+ };
+
pwm1: pwm@30660000 {
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
reg = <0x30660000 0x10000>;
compatible = "arm,im-pd1-syscon", "syscon";
reg = <0x00000000 0x1000>;
- vco1: clock@00 {
+ vco1: vco1-clock {
compatible = "arm,impd1-vco1";
#clock-cells = <0>;
lock-offset = <0x08>;
clock-output-names = "IM-PD1-VCO1";
};
- vco2: clock@04 {
+ vco2: vco2-clock {
compatible = "arm,impd1-vco2";
#clock-cells = <0>;
lock-offset = <0x08>;
--- /dev/null
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for ADI Engineering Coyote platform.
+ * Derived from boardfiles written by MontaVista software.
+ * Ethernet set-up from OpenWrt.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "ADI Engineering Coyote reference design";
+ compatible = "adieng,coyote", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* CHECKME: 16 MB SDRAM minimum, maybe the Coyote actually has more */
+ device_type = "memory";
+ reg = <0x00000000 0x01000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+ stdout-path = "uart1:115200n8";
+ };
+
+ aliases {
+ /* These are switched around */
+ serial0 = &uart1;
+ serial1 = &uart0;
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 32 MB of Flash in 128 0x20000 sized blocks
+ * mapped in at CS0 and CS1
+ */
+ reg = <0 0x00000000 0x2000000>;
+
+ /* Configure expansion bus to allow writes */
+ intel,ixp4xx-eb-write-enable = <1>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* CHECKME: guess this is Redboot FIS */
+ fis-index-block = <0x1ff>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * Taken from Coyote PCI boardfile.
+ * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+ * each handling all IRQs.
+ */
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 6 */
+ <0x0800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 6 */
+ <0x0800 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 6 */
+ <0x0800 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 6 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
+ <0x1000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 11 */
+ <0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
+ <0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 11 */
+ };
+
+ /* EthB */
+ ethernet@c8009000 {
+ status = "ok";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+ };
+
+ /* EthC */
+ ethernet@c800a000 {
+ status = "ok";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Arcom/Eurotech Vulcan board.
+ * This board is a single board computer in the PC/104 form factor based on
+ * IXP425, and was released around 2005. It previously had the name "Mercury".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Arcom/Eurotech Vulcan";
+ compatible = "arcom,vulcan", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ /* CHECKME: using a harddrive at /dev/sda1 as rootfs by default */
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ onewire {
+ compatible = "w1-gpio";
+ gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 32 MB of Flash in 0x20000 byte blocks
+ * mapped in at CS0 and CS1.
+ *
+ * The documentation mentions the existence
+ * of a 16MB version, which we conveniently
+ * ignore. Shout if you own one!
+ */
+ reg = <0 0x00000000 0x2000000>;
+
+ /* Expansion bus settings */
+ intel,ixp4xx-eb-t3 = <3>;
+ intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+ intel,ixp4xx-eb-write-enable = <1>;
+
+ partitions {
+ compatible = "redboot-fis";
+ fis-index-block = <0x1ff>;
+ };
+ };
+ sram@2,0 {
+ /* 256 KB SDRAM memory at CS2 */
+ compatible = "shared-dma-pool";
+ device_type = "memory";
+ reg = <2 0x00000000 0x40000>;
+ no-map;
+ /* Expansion bus settings */
+ intel,ixp4xx-eb-t3 = <1>;
+ intel,ixp4xx-eb-t4 = <2>;
+ intel,ixp4xx-eb-ahb-split-transfers = <1>;
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ };
+ serial@3,0 {
+ /*
+ * 8250-compatible Exar XR16L2551 2 x UART
+ *
+ * CHECKME: if special tweaks are needed, then fix the
+ * operating system to handle it.
+ */
+ compatible = "exar,xr16l2551", "ns8250";
+ reg = <3 0x00000000 0x10>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ clock-frequency = <1843200>;
+ /* Expansion bus settings */
+ intel,ixp4xx-eb-t3 = <3>;
+ intel,ixp4xx-eb-cycle-type = <1>; /* Motorola cycles */
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ };
+ gpio1: gpio@4,0 {
+ /*
+ * MMIO GPIO in one byte
+ */
+ compatible = "arcom,vulcan-gpio";
+ reg = <4 0x00000000 0x1>;
+ /* Expansion bus settings */
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ };
+ watchdog@5,0 {
+ compatible = "maxim,max6369";
+ reg = <5 0x00000000 0x1>;
+ /* Expansion bus settings */
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ };
+ };
+
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * Taken from Vulcan PCI boardfile.
+ *
+ * We have 2 slots (IDSEL) 1 and 2 with one dedicated interrupt
+ * per slot. This interrupt is shared (OR:ed) by all four pins.
+ */
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 2 */
+ <0x0800 0 0 2 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 2 */
+ <0x0800 0 0 3 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 2 */
+ <0x0800 0 0 4 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 2 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 3 */
+ <0x1000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 3 */
+ <0x1000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 3 */
+ <0x1000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 3 */
+ };
+
+ /* EthB */
+ ethernet@c8009000 {
+ status = "ok";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ /* EthC */
+ ethernet@c800a000 {
+ status = "ok";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for D-Link DSM-G600 revision A based on IXP420
+ * NOTE: revision B of this device uses PowerPC and is NOT supported by
+ * this device tree.
+ *
+ * Inspired by the boardfile by Rod Whitby, Tower Technologies, Alessandro Zummo
+ * and Michael Westerhof.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "D-Link DSM-G600 rev A";
+ compatible = "dlink,dsm-g600-a", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 64 MB SDRAM */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-power {
+ label = "dsmg600:green:power";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led-wlan {
+ label = "dsmg600:green:wlan";
+ /* CHECKME: flagged as active low in the old board file */
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ /* We don't have WLAN trigger in the kernel (yet) */
+ linux,default-trigger = "netdev";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ wakeup-source;
+ linux,code = <KEY_ESC>;
+ label = "reset";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_keys_polled {
+ compatible = "gpio-keys-polled";
+
+ /*
+ * According to the board file this key cannot handle interrupts and
+ * need to be polled. Investigate if this is really the case or if
+ * this can be moved adjacent to the ordinary gpio-keys above.
+ */
+ button-power {
+ wakeup-source;
+ linux,code = <KEY_POWER>;
+ label = "power";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ timeout-ms = <5000>;
+ };
+
+ soc {
+ bus@c4000000 {
+ /* The first 16MB region at CS0 on the expansion bus */
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 16 MB of Flash in 128 0x20000 sized blocks
+ * mapped in at CS0.
+ */
+ reg = <0 0x00000000 0x1000000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /*
+ * A boot log says the directory is at 0xfe0000
+ * 0x7f * 0x20000 = 0xfe0000
+ */
+ fis-index-block = <0x7f>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c)
+ * We have slots (IDSEL) 1, 2, 3, 4 and pins 1, 2 and 3.
+ * Only slot 3 have three IRQs.
+ */
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT E on slot 1 is irq 7 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 10 */
+ <0x1800 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 9 */
+ <0x1800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 8 */
+ /* IDSEL 4 */
+ <0x2000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT F on slot 4 is irq 6 */
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Freecom FSG-3 router.
+ * This machine is based on IXP425.
+ * This device tree is inspired by the board file by Rod Whitby.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Freecom FSG-3";
+ compatible = "freecom,fsg-3", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 64 MB memory */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ /* Boot from the first partition on the hard drive */
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button-sync {
+ wakeup-source;
+ /* Closest approximation of what the key should do */
+ linux,code = <KEY_CONNECT>;
+ label = "sync";
+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ };
+ button-reset {
+ wakeup-source;
+ linux,code = <KEY_ESC>;
+ label = "reset";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+ button-usb {
+ wakeup-source;
+ /* Unplug USB, closest approximation of what the key should do */
+ linux,code = <KEY_EJECTCD>;
+ label = "usb";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@28 {
+ /*
+ * Temperature sensor and fan control chip.
+ *
+ * TODO: create a proper device tree binding for
+ * the sensor and temperature zone and create a
+ * zone with fan control.
+ */
+ compatible = "winbond,w83781d";
+ reg = <0x28>;
+ };
+ rtc@6f {
+ compatible = "isil,isl1208";
+ reg = <0x6f>;
+ };
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 4 MB of Flash mapped in at CS0 */
+ reg = <0 0x00000000 0x400000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x3e0000 */
+ fis-index-block = <0x1f>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * Written based on the FSG-3 PCI boardfile.
+ * We have slots 12, 13 & 14 (IDSEL) with one IRQ each.
+ */
+ interrupt-map =
+ /* IDSEL 12 */
+ <0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
+ <0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
+ <0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
+ <0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
+ /* IDSEL 13 */
+ <0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
+ <0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
+ <0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
+ <0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
+ /* IDSEL 14 */
+ <0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
+ <0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
+ <0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
+ <0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
+ };
+
+ /* EthB */
+ ethernet@c8009000 {
+ status = "ok";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+ };
+
+ /* EthC */
+ ethernet@c800a000 {
+ status = "ok";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Gateworks Avila GW2348 board.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Gateworks Avila GW2348";
+ compatible = "gateworks,gw2348", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-user {
+ label = "gw2348:green:user";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@28 {
+ compatible = "adi,ad7418";
+ reg = <0x28>;
+ };
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+ eeprom@51 {
+ compatible = "atmel,24c08";
+ reg = <0x51>;
+ pagesize = <16>;
+ size = <1024>;
+ read-only;
+ };
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 16 MB of Flash mapped in at CS0 */
+ reg = <0 0x00000000 0x1000000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x0fe0000 */
+ fis-index-block = <0x7f>;
+ };
+ };
+ ide@1,0 {
+ compatible = "intel,ixp4xx-compact-flash";
+ /*
+ * Set up expansion bus config to a really slow timing.
+ * The CF driver will dynamically reconfigure these timings
+ * depending on selected PIO mode (0-4).
+ */
+ intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
+ intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
+ intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+ intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+ intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+ intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+ intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+ intel,ixp4xx-eb-mux-address-and-data = <0>;
+ intel,ixp4xx-eb-ahb-split-transfers = <0>;
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ /* First register set is CMD second is CTL (notice it uses CS2) */
+ reg = <1 0x00000000 0x1000000>, <2 0x00000000 0x1000000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ };
+ /*
+ * FIXME: Latch LEDs or extra UARTs at CS4
+ */
+ };
+
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * Taken from Avila PCI boardfile.
+ *
+ * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
+ */
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+ <0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+ <0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+ <0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+ /* IDSEL 4 */
+ <0x2000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
+ <0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
+ <0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
+ <0x2000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
+ };
+
+ /* EthB */
+ ethernet@c8009000 {
+ status = "ok";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ /* EthC */
+ ethernet@c800a000 {
+ status = "ok";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Iomega NAS 100D
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Iomega NAS 100D";
+ compatible = "iom,nas-100d", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 64 MB SDRAM */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-wlan {
+ label = "nas100d:red:wlan";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ /* We don't have WLAN trigger in the kernel (yet) */
+ linux,default-trigger = "netdev";
+ };
+ led-disk {
+ label = "nas100d:red:disk";
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "disk-activity";
+ };
+ led-power {
+ label = "nas100d:red:power";
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button-power {
+ wakeup-source;
+ linux,code = <KEY_POWER>;
+ label = "power";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ };
+ button-reset {
+ wakeup-source;
+ linux,code = <KEY_ESC>;
+ label = "reset";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ timeout-ms = <5000>;
+ };
+
+ soc {
+ bus@c4000000 {
+ /* The first 16MB region at CS0 on the expansion bus */
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 8 MB of Flash in 0x20000 byte blocks
+ * mapped in at CS0.
+ */
+ reg = <0 0x00000000 0x800000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x7e0000 */
+ fis-index-block = <0x3f>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * Taken from NAS 100D PCI boardfile (nas100d-pci.c)
+ * We have slots (IDSEL) 1, 2 and 3 and pins 1, 2 and 3.
+ */
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+ <0x1800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>; /* INT C on slot 3 is irq 7 */
+ };
+
+ ethernet@c8009000 {
+ status = "ok";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDP425 also known as IXCDP1100 Control Plane
+ * processor reference design.
+ *
+ * This platform has the codename "Richfield".
+ *
+ * This machine is based on a 533 MHz IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Intel IXDP425/IXCDP1100 Richfield Reference Design";
+ compatible = "intel,ixdp425", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 16 MB of Flash mapped in at CS0 */
+ reg = <0 0x00000000 0x1000000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x0fe0000 */
+ fis-index-block = <0x7f>;
+ };
+ };
+ };
+
+ /* EthB */
+ ethernet@c8009000 {
+ status = "ok";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ /* EthC */
+ ethernet@c800a000 {
+ status = "ok";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDPG425 reference design.
+ * Derived from boardfiles written by MontaVista software.
+ * Ethernet set-up from OpenWrt.
+ *
+ * The device has 4 x FXS RJ11 ports for analog phones for
+ * internet telephony. (Not supported yet.)
+ *
+ * The device has 9 status LEDs we do not support yet.
+ *
+ * This device is very similar to ADI engingeering Coyote.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Intel IXDPG425 reference design";
+ compatible = "intel,ixdpg425", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 32 MB SDRAM */
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * CHECKME: the product brief says 16MB in a flash
+ * socket.
+ */
+ reg = <0 0x00000000 0x1000000>;
+
+ /* Configure expansion bus to allow writes */
+ intel,ixp4xx-eb-write-enable = <1>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* CHECKME: guess this is Redboot FIS */
+ fis-index-block = <0x7f>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * Taken from IXDPG425 PCI boardfile.
+ * We have slots (IDSEL) 12, 13 and 14 with one assigned IRQ
+ * for 12 & 13 and one for 14.
+ */
+ interrupt-map =
+ /* IDSEL 12 */
+ <0x6000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 7 */
+ <0x6000 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 7 */
+ <0x6000 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 7 */
+ <0x6000 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 7 */
+ /* IDSEL 13 */
+ <0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
+ <0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
+ <0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
+ <0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
+ /* IDSEL 14 */
+ <0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
+ <0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
+ <0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
+ <0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
+ };
+
+ /*
+ * CHECKME: this ethernet setup seems dubious. Photos of the board shows some kind
+ * of Realtek DSA switch on the board.
+ */
+
+ /* EthB */
+ ethernet@c8009000 {
+ status = "ok";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+ };
+
+ /* EthC */
+ ethernet@c800a000 {
+ status = "ok";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ };
+ };
+};
};
soc {
- bus@50000000 {
+ bus@c4000000 {
/* The first 16MB region at CS0 on the expansion bus */
- flash@0 {
+ flash@0,0 {
compatible = "intel,ixp4xx-flash", "cfi-flash";
bank-width = <2>;
/*
* 8 MB of Flash in 0x20000 byte blocks
* mapped in at CS0.
*/
- reg = <0x00000000 0x800000>;
+ reg = <0 0x00000000 0x800000>;
partitions {
compatible = "redboot-fis";
*/
interrupt-map =
/* IDSEL 1 */
- <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
- <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
- <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */
- <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */
+ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
/* IDSEL 2 */
- <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
- <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */
- <0x1000 0 0 3 &gpio0 11 3>, /* INT C on slot 2 is irq 11 */
- <0x1000 0 0 4 &gpio0 8 3>, /* INT D on slot 2 is irq 8 */
+ <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
+ <0x1000 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 8 */
/* IDSEL 3 */
- <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */
- <0x1800 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */
- <0x1800 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */
- <0x1800 0 0 4 &gpio0 8 3>; /* INT D on slot 3 is irq 8 */
+ <0x1800 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+ <0x1800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+ <0x1800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 8 */
};
ethernet@c8009000 {
--- /dev/null
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Linksys WRV54G router
+ * Also known as Gemtek GTWX5715
+ * Based on a board file by George T. Joseph and other patches.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Linksys WRV54G / Gemtek GTWX5715";
+ compatible = "linksys,wrv54g", "gemtek,gtwx5715", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 32 MB memory */
+ device_type = "memory";
+ reg = <0x00000000 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "uart1:115200n8";
+ };
+
+ aliases {
+ /* UART2 is the primary console */
+ serial0 = &uart1;
+ serial1 = &uart0;
+ };
+
+ /* There is an unpopulated LED slot (3) connected to GPIO 8 */
+ leds {
+ compatible = "gpio-leds";
+ led-power {
+ label = "wrv54g:yellow:power";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led-wireless {
+ label = "wrv54g:yellow:wireless";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ led-internet {
+ label = "wrv54g:yellow:internet";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ led-dmz {
+ label = "wrv54g:green:dmz";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ /* This set-up comes from an OpenWrt patch */
+ spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ switch@0 {
+ compatible = "micrel,ks8995";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 8 MB of Flash mapped in at CS0 */
+ reg = <0 0x00000000 0x00800000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ /*
+ * Partition info from a boot log
+ * CHECKME: not using redboot? FIS index 0x3f @7e00000?
+ */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x140000>;
+ read-only;
+ };
+ partition@140000 {
+ label = "linux";
+ reg = <0x140000 0x100000>;
+ read-only;
+ };
+ partition@240000 {
+ label = "root";
+ reg = <0x240000 0x480000>;
+ read-write;
+ };
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
+ * Derived from the GTWX5715 PCI boardfile.
+ */
+ interrupt-map =
+ /* IDSEL 0 */
+ <0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */
+ <0x0000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 0 is irq 11 */
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 1 is irq 10 */
+ };
+
+ /*
+ * EthB - connected to the KS8995 switch ports 1-4
+ * FIXME: the boardfile defines .phy_mask = 0x1e for this port to enable output to
+ * all four switch ports, also using an out of tree multiphy patch.
+ * Do we need a new binding and property for this?
+ */
+ ethernet@c8009000 {
+ status = "ok";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Should be ports 1-4 on the KS8995 switch */
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ /* Should be port 5 on the KS8995 switch */
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+ };
+
+ /* EthC - connected to KS8995 switch port 5 */
+ ethernet@c800a000 {
+ status = "ok";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Netgear WG302v2 based on IXP422BB
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear WG302 v2";
+ compatible = "netgear,wg302v2", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 16 MB SDRAM according to OpenWrt database */
+ device_type = "memory";
+ reg = <0x00000000 0x01000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+ stdout-path = "uart1:115200n8";
+ };
+
+ aliases {
+ /* These are switched around */
+ serial0 = &uart1;
+ serial1 = &uart0;
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 32 MB of Flash in 128 0x20000 sized blocks
+ * mapped in at CS0 and CS1
+ */
+ reg = <0 0x00000000 0x2000000>;
+
+ /* Configure expansion bus to allow writes */
+ intel,ixp4xx-eb-write-enable = <1>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* CHECKME: guess this is Redboot FIS */
+ fis-index-block = <0xff>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c)
+ * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+ * each handling all IRQs.
+ */
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
+ <0x0800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 8 */
+ <0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */
+ <0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 9 */
+ <0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 9 */
+ <0x1000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 9 */
+ };
+
+ ethernet@c8009000 {
+ status = "ok";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy8>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy8: ethernet-phy@8 {
+ reg = <8>;
+ };
+ };
+ };
+ };
+};
serial0 = &uart0;
};
- flash@50000000 {
- compatible = "intel,ixp4xx-flash", "cfi-flash";
- bank-width = <2>;
- /*
- * 16 MB of Flash
- */
- reg = <0x50000000 0x1000000>;
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 16 MB of Flash
+ */
+ reg = <0 0x00000000 0x1000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@0 {
- label = "RedBoot";
- reg = <0x00000000 0x00080000>;
- read-only;
- };
- partition@80000 {
- label = "zImage";
- reg = <0x00080000 0x00100000>;
- read-only;
- };
- partition@180000 {
- label = "ramdisk";
- reg = <0x00180000 0x00300000>;
- read-only;
- };
- partition@480000 {
- label = "User";
- reg = <0x00480000 0x00b60000>;
- read-only;
- };
- partition@fe0000 {
- label = "FIS directory";
- reg = <0x00fe0000 0x001f000>;
- read-only;
- };
- partition@fff000 {
- label = "RedBoot config";
- reg = <0x00fff000 0x0001000>;
- read-only;
+ partition@0 {
+ label = "RedBoot";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "zImage";
+ reg = <0x00080000 0x00100000>;
+ read-only;
+ };
+ partition@180000 {
+ label = "ramdisk";
+ reg = <0x00180000 0x00300000>;
+ read-only;
+ };
+ partition@480000 {
+ label = "User";
+ reg = <0x00480000 0x00b60000>;
+ read-only;
+ };
+ partition@fe0000 {
+ label = "FIS directory";
+ reg = <0x00fe0000 0x001f000>;
+ read-only;
+ };
+ partition@fff000 {
+ label = "RedBoot config";
+ reg = <0x00fff000 0x0001000>;
+ read-only;
+ };
+ };
};
};
};
/ {
soc {
+ bus@c4000000 {
+ compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
+ reg = <0xc4000000 0x28>;
+ };
+
pci@c0000000 {
compatible = "intel,ixp42x-pci";
};
};
soc {
- bus@50000000 {
- flash@0 {
+ bus@c4000000 {
+ flash@0,0 {
compatible = "intel,ixp4xx-flash", "cfi-flash";
bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
/*
* 32 MB of Flash in 0x20000 byte blocks
- * mapped in at CS0.
+ * mapped in at CS0 and CS1
*/
- reg = <0x00000000 0x2000000>;
+ reg = <0 0x00000000 0x2000000>;
partitions {
compatible = "redboot-fis";
fis-index-block = <0xff>;
};
};
+ ide@3,0 {
+ compatible = "intel,ixp4xx-compact-flash";
+ /*
+ * Set up expansion bus config to a really slow timing.
+ * The CF driver will dynamically reconfigure these timings
+ * depending on selected PIO mode (0-4).
+ */
+ intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
+ intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
+ intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+ intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+ intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+ intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+ intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+ intel,ixp4xx-eb-mux-address-and-data = <0>;
+ intel,ixp4xx-eb-ahb-split-transfers = <0>;
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ /* First register set is CMD second is CTL */
+ reg = <3 0xe00000 0x40000>, <3 0xe40000 0x40000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ };
};
pci@c0000000 {
*/
interrupt-map =
/* IDSEL 1 */
- <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
- <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
- <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */
- <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */
+ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
/* IDSEL 2 */
- <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
- <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */
- <0x1000 0 0 3 &gpio0 8 3>, /* INT C on slot 2 is irq 8 */
- <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
+ <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+ <0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
/* IDSEL 3 */
- <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */
- <0x1800 0 0 2 &gpio0 8 3>, /* INT B on slot 3 is irq 8 */
- <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */
- <0x1800 0 0 4 &gpio0 10 3>, /* INT D on slot 3 is irq 10 */
+ <0x1800 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+ <0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+ <0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
/* IDSEL 4 */
- <0x2000 0 0 1 &gpio0 8 3>, /* INT A on slot 3 is irq 8 */
- <0x2000 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */
- <0x2000 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */
- <0x2000 0 0 4 &gpio0 9 3>, /* INT D on slot 3 is irq 9 */
+ <0x2000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
+ <0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+ <0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+ <0x2000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 9 */
/* IDSEL 6 */
- <0x3000 0 0 1 &gpio0 10 3>, /* INT A on slot 3 is irq 10 */
- <0x3000 0 0 2 &gpio0 9 3>, /* INT B on slot 3 is irq 9 */
- <0x3000 0 0 3 &gpio0 8 3>, /* INT C on slot 3 is irq 8 */
- <0x3000 0 0 4 &gpio0 11 3>, /* INT D on slot 3 is irq 11 */
+ <0x3000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 10 */
+ <0x3000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 9 */
+ <0x3000 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 8 */
+ <0x3000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 11 */
/* IDSEL 15 */
- <0x7800 0 0 1 &gpio0 8 3>, /* INT A on slot 3 is irq 8 */
- <0x7800 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */
- <0x7800 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */
- <0x7800 0 0 4 &gpio0 9 3>; /* INT D on slot 3 is irq 9 */
+ <0x7800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
+ <0x7800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+ <0x7800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+ <0x7800 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 9 */
};
ethernet@c800a000 {
--- /dev/null
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel KIXRP435 Control Plane
+ * processor reference design.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp43x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Intel KIXRP435 Reference Design";
+ compatible = "intel,kixrp435", "intel,ixp43x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 16 MB of Flash mapped in at CS0 */
+ reg = <0 0x00000000 0x1000000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x0fe0000 */
+ fis-index-block = <0x7f>;
+ };
+ };
+ };
+
+ /* CHECKME: ethernet set-up taken from Gateworks Cambria */
+ ethernet@c800a000 {
+ status = "ok";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ };
+ };
+
+ ethernet@c800c000 {
+ status = "ok";
+ queue-rx = <&qmgr 2>;
+ queue-txready = <&qmgr 19>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy2>;
+ intel,npe-handle = <&npe 0>;
+ };
+ };
+};
/ {
soc {
+ bus@c4000000 {
+ compatible = "intel,ixp43x-expansion-bus-controller", "syscon";
+ /* Uses at least up to 0x230 */
+ reg = <0xc4000000 0x1000>;
+ };
+
pci@c0000000 {
compatible = "intel,ixp43x-pci";
};
/ {
soc {
+ bus@c4000000 {
+ compatible = "intel,ixp46x-expansion-bus-controller", "syscon";
+ /* Uses at least up to 0x124 */
+ reg = <0xc4000000 0x1000>;
+ };
+
+ rng@70002100 {
+ compatible = "intel,ixp46x-rng";
+ reg = <0x70002100 4>;
+ };
+
interrupt-controller@c8003000 {
compatible = "intel,ixp43x-interrupt";
};
--- /dev/null
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDP465 Control Plane processor reference
+ * design, codename "BMP".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp45x-ixp46x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Intel IXDP465 BMP Reference Design";
+ compatible = "intel,ixdp465", "intel,ixp46x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 32 MB of Flash mapped in at CS0 and CS1 */
+ reg = <0 0x00000000 0x2000000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x1fe0000 */
+ fis-index-block = <0xff>;
+ };
+ };
+ };
+ /* TODO: configure ethernet etc */
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree include file for Intel reference designs for the
+ * XScale Network Processors in the IXP 4xx series. Common device
+ * set-up for IXDP425, IXCDP1100, KIXRP435 and IXDP465.
+ */
+
+/ {
+ memory@0 {
+ /*
+ * The board supports up to 256 MB of memory. Here we put in
+ * 64 MB and this may be modified by the boot loader.
+ */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ /*
+ * Philips PCF8582C-2T/03 512byte I2C EEPROM
+ * should behave like an Atmel 24c04.
+ */
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ pagesize = <16>;
+ size = <512>;
+ read-only;
+ };
+ };
+
+ soc {
+ bus@c4000000 {
+ /* Flash memory defined per-variant */
+ nand-controller@3,0 {
+ /* Some designs have a NAND on CS3 enable it here if present */
+ status = "disabled";
+
+ /*
+ * gen_nand needs to be extended and documented to get
+ * command byte = 1 and address byte = 2 from the device
+ * tree.
+ */
+ compatible = "gen_nand";
+
+ /* Expansion bus set-up */
+ intel,ixp4xx-eb-t1 = <0>;
+ intel,ixp4xx-eb-t2 = <0>;
+ intel,ixp4xx-eb-t3 = <1>; // 1 cycle extra strobe phase
+ intel,ixp4xx-eb-t4 = <0>;
+ intel,ixp4xx-eb-t5 = <0>;
+ intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+ intel,ixp4xx-eb-byte-access-on-halfword = <0>;
+ intel,ixp4xx-eb-mux-address-and-data = <0>;
+ intel,ixp4xx-eb-ahb-split-transfers = <0>;
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+
+ /* 512 bytes memory window */
+ reg = <3 0x00000000 0x200>;
+ nand-on-flash-bbt;
+ nand-ecc-mode = "soft_bch";
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <4>;
+ nce-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* NCE */
+
+ label = "ixp400 NAND";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ fs@0 {
+ label = "ixp400 NAND FS 0";
+ reg = <0x0 0x800000>;
+ };
+ fs@800000 {
+ label = "ixp400 NAND FS 1";
+ reg = <0x800000 0x0>;
+ };
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * Taken from IXDP425 PCI boardfile.
+ * PCI slots on the BIXMB425BD base card.
+ * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
+ */
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+ <0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+ <0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+ <0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+ /* IDSEL 4 */
+ <0x2000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
+ <0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
+ <0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
+ <0x2000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
+ };
+ };
+};
interrupt-parent = <&intcon>;
/*
- * The IXP4xx expansion bus is a set of 16 or 32MB
- * windows in the 256MB space from 0x50000000 to
- * 0x5fffffff.
+ * The IXP4xx expansion bus is a set of up to 7 each up to 16MB
+ * windows in the 256MB space from 0x50000000 to 0x5fffffff.
*/
- bus@50000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
+ bus@c4000000 {
+ /* compatible and reg filled in by per-soc device tree */
+ native-endian;
+ #address-cells = <2>;
#size-cells = <1>;
- ranges = <0x00000000 0x50000000 0x10000000>;
- dma-ranges = <0x00000000 0x50000000 0x10000000>;
+ ranges = <0 0x0 0x50000000 0x01000000>,
+ <1 0x0 0x51000000 0x01000000>,
+ <2 0x0 0x52000000 0x01000000>,
+ <3 0x0 0x53000000 0x01000000>,
+ <4 0x0 0x54000000 0x01000000>,
+ <5 0x0 0x55000000 0x01000000>,
+ <6 0x0 0x56000000 0x01000000>,
+ <7 0x0 0x57000000 0x01000000>;
+ dma-ranges = <0 0x0 0x50000000 0x01000000>,
+ <1 0x0 0x51000000 0x01000000>,
+ <2 0x0 0x52000000 0x01000000>,
+ <3 0x0 0x53000000 0x01000000>,
+ <4 0x0 0x54000000 0x01000000>,
+ <5 0x0 0x55000000 0x01000000>,
+ <6 0x0 0x56000000 0x01000000>,
+ <7 0x0 0x57000000 0x01000000>;
};
qmgr: queue-manager@60000000 {
no-loopback-test;
};
+ uart1: serial@c8001000 {
+ compatible = "intel,xscale-uart";
+ reg = <0xc8001000 0x1000>;
+ /*
+ * The reg-offset and reg-shift is a side effect
+ * of running the platform in big endian mode.
+ */
+ reg-offset = <3>;
+ reg-shift = <2>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <14745600>;
+ no-loopback-test;
+ };
+
gpio0: gpio@c8004000 {
compatible = "intel,ixp4xx-gpio";
reg = <0xc8004000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- pdsp0@0x2a10000 {
+ pdsp0@2a10000 {
reg = <0x2a10000 0x1000 /*iram */
0x2a0f000 0x100 /*reg*/
0x2a0c000 0x3c8 /*intd */
#address-cells = <1>;
#size-cells = <1>;
ranges;
- pdsp0@0x2a10000 {
+ pdsp0@2a10000 {
reg = <0x2a10000 0x1000 /*iram */
0x2a0f000 0x100 /*reg*/
0x2a0c000 0x3c8 /*intd */
#address-cells = <1>;
#size-cells = <1>;
ranges;
- pdsp0@0x2a10000 {
+ pdsp0@2a10000 {
reg = <0x2a10000 0x1000 /*iram */
0x2a0f000 0x100 /*reg*/
0x2a0c000 0x3c8 /*intd */
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/sound/meson-aiu.h>
/ {
#address-cells = <1>;
reg = <0x4000 0x400>;
};
+ aiu: audio-controller@5400 {
+ compatible = "amlogic,aiu";
+ #sound-dai-cells = <2>;
+ sound-name-prefix = "AIU";
+ reg = <0x5400 0x2ac>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "i2s", "spdif";
+ status = "disabled";
+ };
+
assist: assist@7c00 {
compatible = "amlogic,meson-mx-assist", "syscon";
reg = <0x7c00 0x200>;
"pp2", "ppmmu2", "pp4", "ppmmu4",
"pp5", "ppmmu5", "pp6", "ppmmu6";
resets = <&reset RESET_MALI>;
+
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
clock-names = "bus", "core";
+
+ assigned-clocks = <&clkc CLKID_MALI>;
+ assigned-clock-rates = <318750000>;
+
operating-points-v2 = <&gpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
};
};
}; /* end of / */
+&aiu {
+ compatible = "amlogic,aiu-meson8", "amlogic,aiu";
+ clocks = <&clkc CLKID_AIU_GLUE>,
+ <&clkc CLKID_I2S_OUT>,
+ <&clkc CLKID_AOCLK_GATE>,
+ <&clkc CLKID_CTS_AMCLK>,
+ <&clkc CLKID_MIXER_IFACE>,
+ <&clkc CLKID_IEC958>,
+ <&clkc CLKID_IEC958_GATE>,
+ <&clkc CLKID_CTS_MCLK_I958>,
+ <&clkc CLKID_CTS_I958>;
+ clock-names = "pclk",
+ "i2s_pclk",
+ "i2s_aoclk",
+ "i2s_mclk",
+ "i2s_mixer",
+ "spdif_pclk",
+ "spdif_aoclk",
+ "spdif_mclk",
+ "spdif_mclk_sel";
+ resets = <&reset RESET_AIU>;
+};
+
&aobus {
pmu: pmu@e0 {
compatible = "amlogic,meson8-pmu", "syscon";
gpio-ranges = <&pinctrl_aobus 0 0 16>;
};
+ i2s_am_clk_pins: i2s-am-clk-out {
+ mux {
+ groups = "i2s_am_clk_out_ao";
+ function = "i2s_ao";
+ bias-disable;
+ };
+ };
+
+ i2s_out_ao_clk_pins: i2s-ao-clk-out {
+ mux {
+ groups = "i2s_ao_clk_out_ao";
+ function = "i2s_ao";
+ bias-disable;
+ };
+ };
+
+ i2s_out_lr_clk_pins: i2s-lr-clk-out {
+ mux {
+ groups = "i2s_lr_clk_out_ao";
+ function = "i2s_ao";
+ bias-disable;
+ };
+ };
+
+ i2s_out_ch01_ao_pins: i2s-out-ch01 {
+ mux {
+ groups = "i2s_out_ch01_ao";
+ function = "i2s_ao";
+ bias-disable;
+ };
+ };
+
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
};
};
+ spdif_out_pins: spdif-out {
+ mux {
+ groups = "spdif_out";
+ function = "spdif";
+ bias-disable;
+ };
+ };
+
spi_nor_pins: nor {
mux {
groups = "nor_d", "nor_q", "nor_c", "nor_cs";
#clock-cells = <0>;
};
+ sound {
+ compatible = "amlogic,gx-sound-card";
+ model = "M8B-EC100";
+
+ assigned-clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+ assigned-clock-rates = <270950400>,
+ <294912000>,
+ <393216000>;
+
+ dai-link-0 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+ dai-format = "i2s";
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&rt5640>;
+ };
+ };
+ };
+
usb_vbus: regulator-usb-vbus {
/*
* Silergy SY6288CCAC-GP 2A Power Distribution Switch.
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
- vin-supply = <&vcc_5v>;
+ pwm-supply = <&vcc_5v>;
pwms = <&pwm_cd 0 1148 0>;
pwm-dutycycle-range = <100 0>;
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
- vin-supply = <&vcc_5v>;
+ pwm-supply = <&vcc_5v>;
pwms = <&pwm_cd 1 1148 0>;
pwm-dutycycle-range = <100 0>;
};
};
+&aiu {
+ status = "okay";
+
+ pinctrl-0 = <&i2s_am_clk_pins>, <&i2s_out_ao_clk_pins>,
+ <&i2s_out_lr_clk_pins>, <&i2s_out_ch01_ao_pins>;
+ pinctrl-names = "default";
+};
+
&cpu0 {
cpu-supply = <&vcck>;
};
rt5640: codec@1c {
compatible = "realtek,rt5640";
+
reg = <0x1c>;
+
+ #sound-dai-cells = <0>;
+
interrupt-parent = <&gpio_intc>;
interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
+
+ /*
+ * TODO: realtek,ldo1-en-gpios is connected to GPIO_BSD_EN.
+ * We currently cannot configure this pin correctly.
+ * Luckily for us it's in the "right" state by default.
+ */
realtek,in1-differential;
};
};
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
+ pwm-supply = <&vcc_5v>;
+
pwms = <&pwm_cd 0 1148 0>;
pwm-dutycycle-range = <100 0>;
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
- vin-supply = <&vcc_5v>;
+ pwm-supply = <&vcc_5v>;
pwms = <&pwm_cd 1 1148 0>;
pwm-dutycycle-range = <100 0>;
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
- vin-supply = <&p5v0>;
+ pwm-supply = <&p5v0>;
pwms = <&pwm_cd 0 12218 0>;
pwm-dutycycle-range = <91 0>;
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
- vin-supply = <&p5v0>;
+ pwm-supply = <&p5v0>;
pwms = <&pwm_cd 1 12218 0>;
pwm-dutycycle-range = <91 0>;
};
}; /* end of / */
+&aiu {
+ compatible = "amlogic,aiu-meson8b", "amlogic,aiu";
+ clocks = <&clkc CLKID_AIU_GLUE>,
+ <&clkc CLKID_I2S_OUT>,
+ <&clkc CLKID_AOCLK_GATE>,
+ <&clkc CLKID_CTS_AMCLK>,
+ <&clkc CLKID_MIXER_IFACE>,
+ <&clkc CLKID_IEC958>,
+ <&clkc CLKID_IEC958_GATE>,
+ <&clkc CLKID_CTS_MCLK_I958>,
+ <&clkc CLKID_CTS_I958>;
+ clock-names = "pclk",
+ "i2s_pclk",
+ "i2s_aoclk",
+ "i2s_mclk",
+ "i2s_mixer",
+ "spdif_pclk",
+ "spdif_aoclk",
+ "spdif_mclk",
+ "spdif_mclk_sel";
+ resets = <&reset RESET_AIU>;
+};
+
&aobus {
pmu: pmu@e0 {
compatible = "amlogic,meson8b-pmu", "syscon";
gpio-ranges = <&pinctrl_aobus 0 0 16>;
};
+ i2s_am_clk_pins: i2s-am-clk-out {
+ mux {
+ groups = "i2s_am_clk_out";
+ function = "i2s";
+ bias-disable;
+ };
+ };
+
+ i2s_out_ao_clk_pins: i2s-ao-clk-out {
+ mux {
+ groups = "i2s_ao_clk_out";
+ function = "i2s";
+ bias-disable;
+ };
+ };
+
+ i2s_out_lr_clk_pins: i2s-lr-clk-out {
+ mux {
+ groups = "i2s_lr_clk_out";
+ function = "i2s";
+ bias-disable;
+ };
+ };
+
+ i2s_out_ch01_ao_pins: i2s-out-ch01 {
+ mux {
+ groups = "i2s_out_01";
+ function = "i2s";
+ bias-disable;
+ };
+ };
+
+ spdif_out_1_pins: spdif-out-1 {
+ mux {
+ groups = "spdif_out_1";
+ function = "spdif_1";
+ bias-disable;
+ };
+ };
+
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
trips {
cpu_passive: cpu-passive {
- temperature = <47000>;
+ temperature = <57000>;
hysteresis = <2000>;
type = "passive";
};
label = "rootfs";
reg = <0x0600000 0x700000>;
};
- spare1@D00000 {
+ spare1@d00000 {
label = "spare1";
reg = <0x0D00000 0x200000>;
};
- spare2@0F00000 {
+ spare2@f00000 {
label = "spare2";
reg = <0x0F00000 0x200000>;
};
};
target-module@28000 { /* 0x40128000, ap 8 08.0 */
+ /* 0x4012a000, ap 10 0a.0 */
compatible = "ti,sysc-mcasp", "ti,sysc";
reg = <0x28000 0x4>,
<0x28004 0x4>;
reg-names = "rev", "sysc";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
+ <SYSC_IDLE_SMART>;
/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x28000 0x1000>,
- <0x49028000 0x49028000 0x1000>;
-
- /*
- * Child device unsupported by davinci-mcasp. At least
- * RX path is disabled for omap4, and only DIT mode
- * works with no I2S. See also old Android kernel
- * omap-mcasp driver for more information.
- */
- };
-
- target-module@2a000 { /* 0x4012a000, ap 10 0a.0 */
- compatible = "ti,sysc";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x2a000 0x1000>,
+ <0x49028000 0x49028000 0x1000>,
+ <0x2000 0x2a000 0x1000>,
<0x4902a000 0x4902a000 0x1000>;
+
+ mcasp0: mcasp@0 {
+ compatible = "ti,omap4-mcasp-audio";
+ reg = <0x0 0x2000>,
+ <0x4902a000 0x1000>; /* L3 data port */
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx";
+ dmas = <&sdma 8>;
+ dma-names = "tx";
+ clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
+ clock-names = "fck";
+ op-mode = <1>; /* MCASP_DIT_MODE */
+ serial-dir = < 1 >; /* 1 TX serializers */
+ status = "disabled";
+ };
};
target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */
bias-pull-down;
};
};
+
+ ethernet_pins: ethernet-pins {
+ eth_rmii-pinmux {
+ groups = "rmii_txd0_mfp", "rmii_txd1_mfp",
+ "rmii_rxd0_mfp", "rmii_rxd1_mfp",
+ "rmii_txen_mfp", "rmii_rxen_mfp",
+ "rmii_crs_dv_mfp", "rmii_ref_clk_mfp";
+ function = "eth_rmii";
+ };
+
+ phy_clk-pinmux {
+ groups = "clko_25m_mfp";
+ function = "clko_25m";
+ };
+
+ ref_clk-pinconf {
+ groups = "rmii_ref_clk_drv";
+ drive-strength = <2>;
+ };
+
+ };
};
/* uSD */
vqmmc-supply = <&sd_vcc>;
};
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet_pins>;
+ phy-mode = "rmii";
+ phy-handle = <ð_phy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&pinctrl 88 GPIO_ACTIVE_LOW>; /* GPIOC24 */
+ reset-delay-us = <10000>;
+ reset-post-delay-us = <150000>;
+
+ eth_phy: ethernet-phy@3 {
+ reg = <0x3>;
+ max-speed = <100>;
+ interrupt-parent = <&sirq>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
&twd_timer {
status = "okay";
};
dma-names = "mmc";
status = "disabled";
};
+
+ ethernet: ethernet@b0310000 {
+ compatible = "actions,s500-emac", "actions,owl-emac";
+ reg = <0xb0310000 0x10000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>;
+ clock-names = "eth", "rmii";
+ resets = <&cmu RESET_ETHERNET>;
+ status = "disabled";
+ };
};
};
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#size-cells = <0>;
#io-channel-cells = <2>;
- vcoin: adc-channel@00 {
+ vcoin: adc-channel@0 {
reg = <0x00 0x00>;
};
- vbat: adc-channel@01 {
+ vbat: adc-channel@1 {
reg = <0x00 0x01>;
};
- dcin: adc-channel@02 {
+ dcin: adc-channel@2 {
reg = <0x00 0x02>;
};
- vph_pwr: adc-channel@04 {
+ vph_pwr: adc-channel@4 {
reg = <0x00 0x04>;
};
- batt_therm: adc-channel@08 {
+ batt_therm: adc-channel@8 {
reg = <0x00 0x08>;
};
- batt_id: adc-channel@09 {
+ batt_id: adc-channel@9 {
reg = <0x00 0x09>;
};
- usb_vbus: adc-channel@0a {
+ usb_vbus: adc-channel@a {
reg = <0x00 0x0a>;
};
- die_temp: adc-channel@0b {
+ die_temp: adc-channel@b {
reg = <0x00 0x0b>;
};
- ref_625mv: adc-channel@0c {
+ ref_625mv: adc-channel@c {
reg = <0x00 0x0c>;
};
- ref_1250mv: adc-channel@0d {
+ ref_1250mv: adc-channel@d {
reg = <0x00 0x0d>;
};
- chg_temp: adc-channel@0e {
+ chg_temp: adc-channel@e {
reg = <0x00 0x0e>;
};
- ref_muxoff: adc-channel@0f {
+ ref_muxoff: adc-channel@f {
reg = <0x00 0x0f>;
};
};
<&mmcc DSI1_BYTE_CLK>,
<&mmcc DSI_PIXEL_CLK>,
<&mmcc DSI1_ESC_CLK>;
- clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
- "src_clk", "byte_clk", "pixel_clk",
- "core_clk";
+ clock-names = "iface", "bus", "core_mmss",
+ "src", "byte", "pixel",
+ "core";
assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
<&mmcc DSI1_ESC_SRC>,
clocks = <&gcc GMAC_CORE1_CLK>;
clock-names = "stmmaceth";
- resets = <&gcc GMAC_CORE1_RESET>;
- reset-names = "stmmaceth";
+ resets = <&gcc GMAC_CORE1_RESET>,
+ <&gcc GMAC_AHB_RESET>;
+ reset-names = "stmmaceth", "ahb";
status = "disabled";
};
clocks = <&gcc GMAC_CORE2_CLK>;
clock-names = "stmmaceth";
- resets = <&gcc GMAC_CORE2_RESET>;
- reset-names = "stmmaceth";
+ resets = <&gcc GMAC_CORE2_RESET>,
+ <&gcc GMAC_AHB_RESET>;
+ reset-names = "stmmaceth", "ahb";
status = "disabled";
};
clocks = <&gcc GMAC_CORE3_CLK>;
clock-names = "stmmaceth";
- resets = <&gcc GMAC_CORE3_RESET>;
- reset-names = "stmmaceth";
+ resets = <&gcc GMAC_CORE3_RESET>,
+ <&gcc GMAC_AHB_RESET>;
+ reset-names = "stmmaceth", "ahb";
status = "disabled";
};
clocks = <&gcc GMAC_CORE4_CLK>;
clock-names = "stmmaceth";
- resets = <&gcc GMAC_CORE4_RESET>;
- reset-names = "stmmaceth";
+ resets = <&gcc GMAC_CORE4_RESET>,
+ <&gcc GMAC_AHB_RESET>;
+ reset-names = "stmmaceth", "ahb";
status = "disabled";
};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "qcom-msm8226.dtsi"
+
+/ {
+ model = "Samsung Galaxy S III Neo";
+ compatible = "samsung,s3ve3g", "qcom,msm8226";
+
+ aliases {
+ serial0 = &blsp1_uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&soc {
+ serial@f991f000 {
+ status = "ok";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+
+ chosen { };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ intc: interrupt-controller@f9000000 {
+ compatible = "qcom,msm-qgic2";
+ reg = <0xf9000000 0x1000>,
+ <0xf9002000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ gcc: clock-controller@fc400000 {
+ compatible = "qcom,gcc-msm8226";
+ reg = <0xfc400000 0x4000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,msm8226-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 117>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ blsp1_uart3: serial@f991f000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991f000 0x1000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ restart@fc4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0xfc4ab000 0x4>;
+ };
+
+ rng@f9bff000 {
+ compatible = "qcom,prng";
+ reg = <0xf9bff000 0x200>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
+ timer@f9020000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0xf9020000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ frame@f9021000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9021000 0x1000>,
+ <0xf9022000 0x1000>;
+ };
+
+ frame@f9023000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9023000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9024000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9024000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9025000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9025000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9026000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9026000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9027000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9027000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9028000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9028000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 2
+ (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3
+ (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4
+ (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1
+ (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
};
/delete-node/ vreg-boost;
+
+ adsp-pil {
+ cx-supply = <&pma8084_s2>;
+ };
};
&soc {
vddio-supply = <&pma8084_l12>;
};
};
+
+ remoteproc@fc880000 {
+ cx-supply = <&pma8084_s2>;
+ mss-supply = <&pma8084_s6>;
+ mx-supply = <&pma8084_s1>;
+ pll-supply = <&pma8084_l12>;
+ };
};
&spmi_bus {
aliases {
serial0 = &blsp1_uart2;
+ serial1 = &blsp2_uart7;
};
chosen {
pinctrl-0 = <&blsp1_uart2_pin_a>;
};
+ serial@f995d000 {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp2_uart7_pin_a>;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <3000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_pin>,
+ <&bt_dev_wake_pin>,
+ <&bt_reg_on_pin>;
+
+ host-wakeup-gpios = <&msmgpio 95 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&msmgpio 96 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
usb@f9a55000 {
status = "okay";
};
};
+ blsp2_uart7_pin_a: blsp2-uart7-pin-active {
+ tx {
+ pins = "gpio41";
+ function = "blsp_uart7";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio42";
+ function = "blsp_uart7";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ cts {
+ pins = "gpio43";
+ function = "blsp_uart7";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ rts {
+ pins = "gpio44";
+ function = "blsp_uart7";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
i2c8_pins: i2c8 {
mux {
pins = "gpio47", "gpio48";
input-enable;
};
};
+
+ bt_host_wake_pin: bt-host-wake {
+ pins = "gpio95";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ bt_dev_wake_pin: bt-dev-wake {
+ pins = "gpio96";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
};
i2c@f9964000 {
power-source = <PM8941_GPIO_S3>;
};
+ bt_reg_on_pin: bt-reg-on {
+ pins = "gpio16";
+ function = "normal";
+
+ output-low;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
wlan_sleep_clk_pin: wl-sleep-clk {
pins = "gpio17";
function = "func2";
status = "disabled";
};
+ blsp2_uart7: serial@f995d000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf995d000 0x1000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
+ clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp2_uart8: serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
reg = <0x8ff00000 0x100000>;
};
- tz_apps_mem: memory@0x90000000 {
+ tz_apps_mem: memory@90000000 {
no-map;
reg = <0x90000000 0x500000>;
};
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
<GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
<GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
clocks = <&cpg CPG_MOD 87>;
power-domains = <&cpg>;
clock-frequency = <100000>;
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
clocks = <&cpg CPG_MOD 86>;
power-domains = <&cpg>;
clock-frequency = <100000>;
<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
clocks = <&cpg CPG_MOD 85>;
power-domains = <&cpg>;
clock-frequency = <100000>;
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
clocks = <&cpg CPG_MOD 84>;
power-domains = <&cpg>;
clock-frequency = <100000>;
power-domains = <&pd_a3bc>;
};
- dmac: dma-multiplexer {
- compatible = "renesas,shdma-mux";
- #dma-cells = <1>;
- dma-channels = <20>;
- dma-requests = <256>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- dma0: dma-controller@e6700020 {
- compatible = "renesas,shdma-r8a73a4";
- reg = <0 0xe6700020 0 0x89e0>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error",
- "ch0", "ch1", "ch2", "ch3",
- "ch4", "ch5", "ch6", "ch7",
- "ch8", "ch9", "ch10", "ch11",
- "ch12", "ch13", "ch14", "ch15",
- "ch16", "ch17", "ch18", "ch19";
- clocks = <&mstp2_clks R8A73A4_CLK_DMAC>;
- power-domains = <&pd_a3sp>;
- };
- };
-
i2c5: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
iic3: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7742";
+ compatible = "renesas,iic-r8a7742",
+ "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 926>;
/* doesn't need pinmux */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7743";
+ compatible = "renesas,iic-r8a7743",
+ "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 926>;
/* doesn't need pinmux */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7744";
+ compatible = "renesas,iic-r8a7744",
+ "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 926>;
};
timer2: timer@2000e000 {
- compatible = "snps,dw-apb-timer-osc";
+ compatible = "snps,dw-apb-timer";
reg = <0x2000e000 0x100>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
};
timer0: timer@20038000 {
- compatible = "snps,dw-apb-timer-osc";
+ compatible = "snps,dw-apb-timer";
reg = <0x20038000 0x100>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
};
timer1: timer@2003a000 {
- compatible = "snps,dw-apb-timer-osc";
+ compatible = "snps,dw-apb-timer";
reg = <0x2003a000 0x100>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
#interrupt-cells = <2>;
};
- pcfg_pull_default: pcfg_pull_default {
+ pcfg_pull_default: pcfg-pull-default {
bias-pull-pin-default;
};
- pcfg_pull_none: pcfg_pull_none {
+ pcfg_pull_none: pcfg-pull-none {
bias-disable;
};
#interrupt-cells = <2>;
};
- pcfg_pull_up: pcfg_pull_up {
+ pcfg_pull_up: pcfg-pull-up {
bias-pull-up;
};
- pcfg_pull_down: pcfg_pull_down {
+ pcfg_pull_down: pcfg-pull-down {
bias-pull-down;
};
- pcfg_pull_none: pcfg_pull_none {
+ pcfg_pull_none: pcfg-pull-none {
bias-disable;
};
power-domains = <&power RK3188_PD_GPU>;
};
-&grf{
+&grf {
compatible = "rockchip,rk3188-grf", "syscon", "simple-mfd";
+ io_domains: io-domains {
+ compatible = "rockchip,rk3188-io-voltage-domain";
+ status = "disabled";
+ };
+
usbphy: usbphy {
compatible = "rockchip,rk3188-usb-phy",
"rockchip,rk3288-usb-phy";
compatible = "rockchip,iommu";
reg = <0x0 0xff900800 0x0 0x40>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "iep_mmu";
clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
compatible = "rockchip,iommu";
reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "isp_mmu";
clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
compatible = "rockchip,iommu";
reg = <0x0 0xff930300 0x0 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vopb_mmu";
clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
clock-names = "aclk", "iface";
power-domains = <&power RK3288_PD_VIO>;
compatible = "rockchip,iommu";
reg = <0x0 0xff940300 0x0 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vopl_mmu";
clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
clock-names = "aclk", "iface";
power-domains = <&power RK3288_PD_VIO>;
compatible = "rockchip,iommu";
reg = <0x0 0xff9a0800 0x0 0x100>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vpu_mmu";
clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
compatible = "rockchip,iommu";
reg = <0x0 0xff9c0440 0x0 0x40>, <0x0 0xff9c0480 0x0 0x40>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hevc_mmu";
clocks = <&cru ACLK_HEVC>, <&cru HCLK_HEVC>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
#address-cells = <1>;
#size-cells = <1>;
+ io_domains: io-domains {
+ compatible = "rockchip,rv1108-io-voltage-domain";
+ status = "disabled";
+ };
+
u2phy: usb2phy@100 {
compatible = "rockchip,rv1108-usb2phy";
reg = <0x100 0x0c>;
};
pmugrf: syscon@20060000 {
- compatible = "rockchip,rv1108-pmugrf", "syscon";
+ compatible = "rockchip,rv1108-pmugrf", "syscon", "simple-mfd";
reg = <0x20060000 0x1000>;
+
+ pmu_io_domains: io-domains {
+ compatible = "rockchip,rv1108-pmu-io-voltage-domain";
+ status = "disabled";
+ };
};
usbgrf: syscon@202a0000 {
status = "disabled";
};
+ sfc: spi@301c0000 {
+ compatible = "rockchip,sfc";
+ reg = <0x301c0000 0x4000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+ clock-names = "clk_sfc", "hclk_sfc";
+ pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
gmac: eth@30200000 {
compatible = "rockchip,rv1108-gmac";
reg = <0x30200000 0x10000>;
};
};
+ sfc {
+ sfc_bus4: sfc-bus4 {
+ rockchip,pins =
+ <2 RK_PA0 3 &pcfg_pull_none>,
+ <2 RK_PA1 3 &pcfg_pull_none>,
+ <2 RK_PA2 3 &pcfg_pull_none>,
+ <2 RK_PA3 3 &pcfg_pull_none>;
+ };
+
+ sfc_bus2: sfc-bus2 {
+ rockchip,pins =
+ <2 RK_PA0 3 &pcfg_pull_none>,
+ <2 RK_PA1 3 &pcfg_pull_none>;
+ };
+
+ sfc_cs0: sfc-cs0 {
+ rockchip,pins =
+ <2 RK_PB4 3 &pcfg_pull_none>;
+ };
+
+ sfc_clk: sfc-clk {
+ rockchip,pins =
+ <2 RK_PB7 2 &pcfg_pull_none>;
+ };
+ };
+
gmac {
rmii_pins: rmii-pins {
rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>,
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0 0
+#define PIN_PA0__GPIO PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__FLEXCOM0_IO0 PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__CANTX3 PINMUX_PIN(PIN_PA0, 3, 1)
+#define PIN_PA0__PWML0 PINMUX_PIN(PIN_PA0, 5, 2)
+#define PIN_PA1 1
+#define PIN_PA1__GPIO PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__FLEXCOM0_IO1 PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__CANRX3 PINMUX_PIN(PIN_PA1, 3, 1)
+#define PIN_PA1__D14 PINMUX_PIN(PIN_PA1, 4, 1)
+#define PIN_PA1__PWMH0 PINMUX_PIN(PIN_PA1, 5, 3)
+#define PIN_PA2 2
+#define PIN_PA2__GPIO PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_RSTN PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__FLEXCOM0_IO2 PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__PDMC1_CLK PINMUX_PIN(PIN_PA2, 3, 1)
+#define PIN_PA2__D15 PINMUX_PIN(PIN_PA2, 4, 1)
+#define PIN_PA2__PWMH1 PINMUX_PIN(PIN_PA2, 5, 3)
+#define PIN_PA2__FLEXCOM1_IO0 PINMUX_PIN(PIN_PA2, 6, 3)
+#define PIN_PA3 3
+#define PIN_PA3__GPIO PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT0 PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__FLEXCOM0_IO3 PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__PDMC1_DS0 PINMUX_PIN(PIN_PA3, 3, 1)
+#define PIN_PA3__NWR1_NBS1 PINMUX_PIN(PIN_PA3, 4, 1)
+#define PIN_PA3__PWML3 PINMUX_PIN(PIN_PA3, 5, 3)
+#define PIN_PA3__FLEXCOM1_IO1 PINMUX_PIN(PIN_PA3, 6, 3)
+#define PIN_PA4 4
+#define PIN_PA4__GPIO PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT1 PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__FLEXCOM0_IO4 PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__PDMC1_DS1 PINMUX_PIN(PIN_PA4, 3, 1)
+#define PIN_PA4__NCS2 PINMUX_PIN(PIN_PA4, 4, 1)
+#define PIN_PA4__PWMH3 PINMUX_PIN(PIN_PA4, 5, 3)
+#define PIN_PA4__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA4, 6, 3)
+#define PIN_PA5 5
+#define PIN_PA5__GPIO PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT2 PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__FLEXCOM1_IO0 PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__CANTX2 PINMUX_PIN(PIN_PA5, 3, 1)
+#define PIN_PA5__A23 PINMUX_PIN(PIN_PA5, 4, 1)
+#define PIN_PA5__PWMEXTRG0 PINMUX_PIN(PIN_PA5, 5, 3)
+#define PIN_PA5__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA5, 6, 3)
+#define PIN_PA6 6
+#define PIN_PA6__GPIO PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT3 PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__FLEXCOM1_IO1 PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__CANRX2 PINMUX_PIN(PIN_PA6, 3, 1)
+#define PIN_PA6__A24 PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__PWMEXTRG1 PINMUX_PIN(PIN_PA6, 5, 3)
+#define PIN_PA6__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA6, 6, 3)
+#define PIN_PA7 7
+#define PIN_PA7__GPIO PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT4 PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__CANTX1 PINMUX_PIN(PIN_PA7, 3, 1)
+#define PIN_PA7__NWAIT PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__PWMFI0 PINMUX_PIN(PIN_PA7, 5, 3)
+#define PIN_PA7__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA7, 6, 3)
+#define PIN_PA8 8
+#define PIN_PA8__GPIO PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT5 PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__CANRX1 PINMUX_PIN(PIN_PA8, 3, 1)
+#define PIN_PA8__NCS0 PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__PWMIF1 PINMUX_PIN(PIN_PA8, 5, 3)
+#define PIN_PA8__FLEXCOM4_IO0 PINMUX_PIN(PIN_PA8, 6, 3)
+#define PIN_PA9 9
+#define PIN_PA9__GPIO PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT6 PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__FLEXCOM2_IO2 PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__CANTX0 PINMUX_PIN(PIN_PA9, 3, 1)
+#define PIN_PA9__SMCK PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__SPDIF_RX PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__FLEXCOM4_IO1 PINMUX_PIN(PIN_PA9, 6, 3)
+#define PIN_PA10 10
+#define PIN_PA10__GPIO PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_DAT7 PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__FLEXCOM2_IO3 PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__CANRX0 PINMUX_PIN(PIN_PA10, 3, 1)
+#define PIN_PA10__NCS1 PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__SPDIF_TX PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__FLEXCOM5_IO0 PINMUX_PIN(PIN_PA10, 6, 3)
+#define PIN_PA11 11
+#define PIN_PA11__GPIO PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_DS PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__FLEXCOM2_IO4 PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__A0_NBS0 PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__TIOA0 PINMUX_PIN(PIN_PA11, 5, 1)
+#define PIN_PA11__FLEXCOM5_IO1 PINMUX_PIN(PIN_PA11, 6, 3)
+#define PIN_PA12 12
+#define PIN_PA12__GPIO PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__FLEXCOM1_IO3 PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__FLEXCOM3_IO5 PINMUX_PIN(PIN_PA12, 4, 1)
+#define PIN_PA12__PWML2 PINMUX_PIN(PIN_PA12, 5, 3)
+#define PIN_PA12__FLEXCOM6_IO0 PINMUX_PIN(PIN_PA12, 6, 3)
+#define PIN_PA13 13
+#define PIN_PA13__GPIO PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_1V8SEL PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM1_IO2 PINMUX_PIN(PIN_PA13, 2, 1)
+#define PIN_PA13__FLEXCOM3_IO6 PINMUX_PIN(PIN_PA13, 4, 1)
+#define PIN_PA13__PWMH2 PINMUX_PIN(PIN_PA13, 5, 3)
+#define PIN_PA13__FLEXCOM6_IO1 PINMUX_PIN(PIN_PA13, 6, 3)
+#define PIN_PA14 14
+#define PIN_PA14__GPIO PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SDMMC0_CD PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__FLEXCOM1_IO4 PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__A25 PINMUX_PIN(PIN_PA14, 4, 1)
+#define PIN_PA14__PWML1 PINMUX_PIN(PIN_PA14, 5, 3)
+#define PIN_PA15 15
+#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__G0_TXEN PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__ISC_MCK PINMUX_PIN(PIN_PA15, 3, 1)
+#define PIN_PA15__A1 PINMUX_PIN(PIN_PA15, 4, 1)
+#define PIN_PA15__TIOB0 PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA16 16
+#define PIN_PA16__GPIO PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__G0_TX0 PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__ISC_D0 PINMUX_PIN(PIN_PA16, 3, 1)
+#define PIN_PA16__A2 PINMUX_PIN(PIN_PA16, 4, 1)
+#define PIN_PA16__TCLK0 PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA17 17
+#define PIN_PA17__GPIO PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__G0_TX1 PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__ISC_D1 PINMUX_PIN(PIN_PA17, 3, 1)
+#define PIN_PA17__A3 PINMUX_PIN(PIN_PA17, 4, 1)
+#define PIN_PA17__TIOA1 PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA18 18
+#define PIN_PA18__GPIO PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__G0_RXDV PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__ISC_D2 PINMUX_PIN(PIN_PA18, 3, 1)
+#define PIN_PA18__A4 PINMUX_PIN(PIN_PA18, 4, 1)
+#define PIN_PA18__TIOB1 PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA19 19
+#define PIN_PA19__GPIO PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__G0_RX0 PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__ISC_D3 PINMUX_PIN(PIN_PA19, 3, 1)
+#define PIN_PA19__A5 PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__TCLK1 PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA20 20
+#define PIN_PA20__GPIO PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__G0_RX1 PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__FLEXCOM4_IO0 PINMUX_PIN(PIN_PA20, 2, 1)
+#define PIN_PA20__ISC_D4 PINMUX_PIN(PIN_PA20, 3, 1)
+#define PIN_PA20__A6 PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__TIOA2 PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA21 21
+#define PIN_PA21__GPIO PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__G0_RXER PINMUX_PIN(PIN_PA21, 1, 1)
+#define PIN_PA21__FLEXCOM4_IO1 PINMUX_PIN(PIN_PA21, 2, 1)
+#define PIN_PA21__ISC_D5 PINMUX_PIN(PIN_PA21, 3, 1)
+#define PIN_PA21__A7 PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__TIOB2 PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA22 22
+#define PIN_PA22__GPIO PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__G0_MDC PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__FLEXCOM4_IO2 PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__ISC_D6 PINMUX_PIN(PIN_PA22, 3, 1)
+#define PIN_PA22__A8 PINMUX_PIN(PIN_PA22, 4, 1)
+#define PIN_PA22__TCLK2 PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA23 23
+#define PIN_PA23__GPIO PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__G0_MDIO PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__FLEXCOM4_IO3 PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__ISC_D7 PINMUX_PIN(PIN_PA23, 3, 1)
+#define PIN_PA23__A9 PINMUX_PIN(PIN_PA23, 4, 1)
+#define PIN_PA24 24
+#define PIN_PA24__GPIO PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__G0_TXCK PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__FLEXCOM4_IO4 PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__ISC_HSYNC PINMUX_PIN(PIN_PA24, 3, 1)
+#define PIN_PA24__A10 PINMUX_PIN(PIN_PA24, 4, 1)
+#define PIN_PA24__FLEXCOM0_IO5 PINMUX_PIN(PIN_PA24, 5, 1)
+#define PIN_PA25 25
+#define PIN_PA25__GPIO PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__G0_125CK PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__FLEXCOM5_IO4 PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__ISC_VSYNC PINMUX_PIN(PIN_PA25, 3, 1)
+#define PIN_PA25__A11 PINMUX_PIN(PIN_PA25, 4, 1)
+#define PIN_PA25__FLEXCOM0_IO6 PINMUX_PIN(PIN_PA25, 5, 1)
+#define PIN_PA25__FLEXCOM7_IO0 PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26 26
+#define PIN_PA26__GPIO PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__G0_TX2 PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__FLEXCOM5_IO2 PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__ISC_FIELD PINMUX_PIN(PIN_PA26, 3, 1)
+#define PIN_PA26__A12 PINMUX_PIN(PIN_PA26, 4, 1)
+#define PIN_PA26__TF0 PINMUX_PIN(PIN_PA26, 5, 1)
+#define PIN_PA26__FLEXCOM7_IO1 PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27 27
+#define PIN_PA27__GPIO PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__G0_TX3 PINMUX_PIN(PIN_PA27, 1, 1)
+#define PIN_PA27__FLEXCOM5_IO3 PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__ISC_PCK PINMUX_PIN(PIN_PA27, 3, 1)
+#define PIN_PA27__A13 PINMUX_PIN(PIN_PA27, 4, 1)
+#define PIN_PA27__TK0 PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__FLEXCOM8_IO0 PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28 28
+#define PIN_PA28__GPIO PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__G0_RX2 PINMUX_PIN(PIN_PA28, 1, 1)
+#define PIN_PA28__FLEXCOM5_IO0 PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__ISC_D8 PINMUX_PIN(PIN_PA28, 3, 1)
+#define PIN_PA28__A14 PINMUX_PIN(PIN_PA28, 4, 1)
+#define PIN_PA28__RD0 PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__FLEXCOM8_IO1 PINMUX_PIN(PIN_PA28, 6, 3)
+#define PIN_PA29 29
+#define PIN_PA29__GPIO PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__G0_RX3 PINMUX_PIN(PIN_PA29, 1, 1)
+#define PIN_PA29__FLEXCOM5_IO1 PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__ISC_D9 PINMUX_PIN(PIN_PA29, 3, 1)
+#define PIN_PA29__A15 PINMUX_PIN(PIN_PA29, 4, 1)
+#define PIN_PA29__RF0 PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__FLEXCOM9_IO0 PINMUX_PIN(PIN_PA29, 6, 3)
+#define PIN_PA30 30
+#define PIN_PA30__GPIO PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__G0_RXCK PINMUX_PIN(PIN_PA30, 1, 1)
+#define PIN_PA30__FLEXCOM6_IO4 PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__ISC_D10 PINMUX_PIN(PIN_PA30, 3, 1)
+#define PIN_PA30__A16 PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__RK0 PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__FLEXCOM9_IO1 PINMUX_PIN(PIN_PA30, 6, 3)
+#define PIN_PA31 31
+#define PIN_PA31__GPIO PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__G0_TXER PINMUX_PIN(PIN_PA31, 1, 1)
+#define PIN_PA31__FLEXCOM6_IO2 PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__ISC_D11 PINMUX_PIN(PIN_PA31, 3, 1)
+#define PIN_PA31__A17 PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__TD0 PINMUX_PIN(PIN_PA31, 5, 1)
+#define PIN_PA31__FLEXCOM10_IO0 PINMUX_PIN(PIN_PA31, 6, 3)
+#define PIN_PB0 32
+#define PIN_PB0__GPIO PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__G0_COL PINMUX_PIN(PIN_PB0, 1, 1)
+#define PIN_PB0__FLEXCOM6_IO3 PINMUX_PIN(PIN_PB0, 2, 2)
+#define PIN_PB0__EXT_IRQ0 PINMUX_PIN(PIN_PB0, 3, 1)
+#define PIN_PB0__A18 PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB0__SPDIF_RX PINMUX_PIN(PIN_PB0, 5, 2)
+#define PIN_PB0__FLEXCOM10_IO1 PINMUX_PIN(PIN_PB0, 6, 3)
+#define PIN_PB1 33
+#define PIN_PB1__GPIO PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__G0_CRS PINMUX_PIN(PIN_PB1, 1, 1)
+#define PIN_PB1__FLEXCOM6_IO1 PINMUX_PIN(PIN_PB1, 2, 2)
+#define PIN_PB1__EXT_IRQ1 PINMUX_PIN(PIN_PB1, 3, 1)
+#define PIN_PB1__A19 PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__SPDIF_TX PINMUX_PIN(PIN_PB1, 5, 2)
+#define PIN_PB1__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB1, 6, 3)
+#define PIN_PB2 34
+#define PIN_PB2__GPIO PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__G0_TSUCOMP PINMUX_PIN(PIN_PB2, 1, 1)
+#define PIN_PB2__FLEXCOM6_IO0 PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__ADTRG PINMUX_PIN(PIN_PB2, 3, 1)
+#define PIN_PB2__A20 PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB3 35
+#define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__RF1 PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__PCK2 PINMUX_PIN(PIN_PB3, 3, 2)
+#define PIN_PB3__D8 PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB4 36
+#define PIN_PB4__GPIO PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__TF1 PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__FLEXCOM11_IO1 PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__PCK3 PINMUX_PIN(PIN_PB4, 3, 2)
+#define PIN_PB4__D9 PINMUX_PIN(PIN_PB4, 4, 1)
+#define PIN_PB5 37
+#define PIN_PB5__GPIO PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TK1 PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__FLEXCOM11_IO2 PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PCK4 PINMUX_PIN(PIN_PB5, 3, 2)
+#define PIN_PB5__D10 PINMUX_PIN(PIN_PB5, 4, 1)
+#define PIN_PB6 38
+#define PIN_PB6__GPIO PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__RK1 PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__FLEXCOM11_IO3 PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PCK5 PINMUX_PIN(PIN_PB6, 3, 2)
+#define PIN_PB6__D11 PINMUX_PIN(PIN_PB6, 4, 1)
+#define PIN_PB7 39
+#define PIN_PB7__GPIO PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TD1 PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__FLEXCOM11_IO4 PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__FLEXCOM3_IO5 PINMUX_PIN(PIN_PB7, 3, 2)
+#define PIN_PB7__D12 PINMUX_PIN(PIN_PB7, 4, 1)
+#define PIN_PB8 40
+#define PIN_PB8__GPIO PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__RD1 PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__FLEXCOM8_IO0 PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__FLEXCOM3_IO6 PINMUX_PIN(PIN_PB8, 3, 2)
+#define PIN_PB8__D13 PINMUX_PIN(PIN_PB8, 4, 1)
+#define PIN_PB9 41
+#define PIN_PB9__GPIO PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__QSPI0_IO3 PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__FLEXCOM8_IO1 PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PDMC0_CLK PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__NCS3_NANDCS PINMUX_PIN(PIN_PB9, 4, 1)
+#define PIN_PB9__PWML0 PINMUX_PIN(PIN_PB9, 5, 2)
+#define PIN_PB10 42
+#define PIN_PB10__GPIO PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__QSPI0_IO2 PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__FLEXCOM8_IO2 PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PDMC0_DS0 PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__NWE_NWR0_NANDWE PINMUX_PIN(PIN_PB10, 4, 1)
+#define PIN_PB10__PWMH0 PINMUX_PIN(PIN_PB10, 5, 2)
+#define PIN_PB11 43
+#define PIN_PB11__GPIO PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__QSPI0_IO1 PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__FLEXCOM8_IO3 PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__PDMC0_DS1 PINMUX_PIN(PIN_PB11, 3, 1)
+#define PIN_PB11__NRD_NANDOE PINMUX_PIN(PIN_PB11, 4, 1)
+#define PIN_PB11__PWML1 PINMUX_PIN(PIN_PB11, 5, 2)
+#define PIN_PB12 44
+#define PIN_PB12__GPIO PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__QSPI0_IO0 PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__FLEXCOM8_IO4 PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__FLEXCOM6_IO5 PINMUX_PIN(PIN_PB12, 3, 1)
+#define PIN_PB12__A21_NANDALE PINMUX_PIN(PIN_PB12, 4, 1)
+#define PIN_PB12__PWMH1 PINMUX_PIN(PIN_PB12, 5, 2)
+#define PIN_PB13 45
+#define PIN_PB13__GPIO PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__QSPI0_CS PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__FLEXCOM9_IO0 PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__FLEXCOM6_IO6 PINMUX_PIN(PIN_PB13, 3, 1)
+#define PIN_PB13__A22_NANDCLE PINMUX_PIN(PIN_PB13, 4, 1)
+#define PIN_PB13__PWML2 PINMUX_PIN(PIN_PB13, 5, 2)
+#define PIN_PB14 46
+#define PIN_PB14__GPIO PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__QSPI0_SCK PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__FLEXCOM9_IO1 PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__D0 PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__PWMH2 PINMUX_PIN(PIN_PB14, 5, 2)
+#define PIN_PB15 47
+#define PIN_PB15__GPIO PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__QSPI0_SCKN PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__FLEXCOM9_IO2 PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__D1 PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__PWML3 PINMUX_PIN(PIN_PB15, 5, 2)
+#define PIN_PB16 48
+#define PIN_PB16__GPIO PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__QSPI0_IO4 PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__FLEXCOM9_IO3 PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__PCK0 PINMUX_PIN(PIN_PB16, 3, 1)
+#define PIN_PB16__D2 PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__PWMH3 PINMUX_PIN(PIN_PB16, 5, 2)
+#define PIN_PB16__EXT_IRQ0 PINMUX_PIN(PIN_PB16, 6, 2)
+#define PIN_PB17 49
+#define PIN_PB17__GPIO PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__QSPI0_IO5 PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__FLEXCOM9_IO4 PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__PCK1 PINMUX_PIN(PIN_PB17, 3, 1)
+#define PIN_PB17__D3 PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__PWMEXTRG0 PINMUX_PIN(PIN_PB17, 5, 2)
+#define PIN_PB17__EXT_IRQ1 PINMUX_PIN(PIN_PB17, 6, 2)
+#define PIN_PB18 50
+#define PIN_PB18__GPIO PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__QSPI0_IO6 PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__FLEXCOM10_IO0 PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__PCK2 PINMUX_PIN(PIN_PB18, 3, 1)
+#define PIN_PB18__D4 PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__PWMEXTRG1 PINMUX_PIN(PIN_PB18, 5, 2)
+#define PIN_PB19 51
+#define PIN_PB19__GPIO PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__QSPI0_IO7 PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__FLEXCOM10_IO1 PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__PCK3 PINMUX_PIN(PIN_PB19, 3, 1)
+#define PIN_PB19__D5 PINMUX_PIN(PIN_PB19, 4, 1)
+#define PIN_PB19__PWMFI0 PINMUX_PIN(PIN_PB19, 5, 2)
+#define PIN_PB20 52
+#define PIN_PB20__GPIO PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__QSPI0_DQS PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__FLEXCOM10_IO2 PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__D6 PINMUX_PIN(PIN_PB20, 4, 1)
+#define PIN_PB20__PWMFI1 PINMUX_PIN(PIN_PB20, 5, 2)
+#define PIN_PB21 53
+#define PIN_PB21__GPIO PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__QSPI0_INT PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__FLEXCOM10_IO3 PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__FLEXCOM9_IO5 PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__D7 PINMUX_PIN(PIN_PB21, 4, 1)
+#define PIN_PB22 54
+#define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__QSPI1_IO3 PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__FLEXCOM10_IO4 PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__FLEXCOM9_IO6 PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__NANDRDY PINMUX_PIN(PIN_PB22, 4, 1)
+#define PIN_PB23 55
+#define PIN_PB23__GPIO PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__QSPI1_IO2 PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__FLEXCOM7_IO0 PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__I2SMCC0_CK PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__PCK4 PINMUX_PIN(PIN_PB23, 6, 1)
+#define PIN_PB24 56
+#define PIN_PB24__GPIO PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__QSPI1_IO1 PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__FLEXCOM7_IO1 PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__I2SMCC0_WS PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__PCK5 PINMUX_PIN(PIN_PB24, 6, 1)
+#define PIN_PB25 57
+#define PIN_PB25__GPIO PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__QSPI1_IO0 PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__FLEXCOM7_IO2 PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__I2SMCC0_DOUT1 PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__PCK6 PINMUX_PIN(PIN_PB25, 6, 1)
+#define PIN_PB26 58
+#define PIN_PB26__GPIO PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__QSPI1_CS PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__FLEXCOM7_IO3 PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__I2SMCC0_DOUT0 PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PWMEXTRG0 PINMUX_PIN(PIN_PB26, 5, 1)
+#define PIN_PB26__PCK7 PINMUX_PIN(PIN_PB26, 6, 1)
+#define PIN_PB27 59
+#define PIN_PB27__GPIO PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__QSPI1_SCK PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__FLEXCOM7_IO4 PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__I2SMCC0_MCK PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PWMEXTRG1 PINMUX_PIN(PIN_PB27, 5, 1)
+#define PIN_PB28 60
+#define PIN_PB28__GPIO PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__SDMMC1_RSTN PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__ADTRG PINMUX_PIN(PIN_PB28, 2, 2)
+#define PIN_PB28__PWMFI0 PINMUX_PIN(PIN_PB28, 5, 1)
+#define PIN_PB28__FLEXCOM7_IO0 PINMUX_PIN(PIN_PB28, 6, 4)
+#define PIN_PB29 61
+#define PIN_PB29__GPIO PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__SDMMC1_CMD PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__FLEXCOM3_IO2 PINMUX_PIN(PIN_PB29, 2, 2)
+#define PIN_PB29__FLEXCOM0_IO5 PINMUX_PIN(PIN_PB29, 3, 2)
+#define PIN_PB29__TIOA3 PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__PWMFI1 PINMUX_PIN(PIN_PB29, 5, 1)
+#define PIN_PB29__FLEXCOM7_IO1 PINMUX_PIN(PIN_PB29, 6, 4)
+#define PIN_PB30 62
+#define PIN_PB30__GPIO PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__SDMMC1_CK PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__FLEXCOM3_IO3 PINMUX_PIN(PIN_PB30, 2, 2)
+#define PIN_PB30__FLEXCOM0_IO6 PINMUX_PIN(PIN_PB30, 3, 2)
+#define PIN_PB30__TIOB3 PINMUX_PIN(PIN_PB30, 4, 1)
+#define PIN_PB30__PWMH0 PINMUX_PIN(PIN_PB30, 5, 1)
+#define PIN_PB30__FLEXCOM8_IO0 PINMUX_PIN(PIN_PB30, 6, 4)
+#define PIN_PB31 63
+#define PIN_PB31__GPIO PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__SDMMC1_DAT0 PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__FLEXCOM3_IO4 PINMUX_PIN(PIN_PB31, 2, 2)
+#define PIN_PB31__FLEXCOM9_IO5 PINMUX_PIN(PIN_PB31, 3, 2)
+#define PIN_PB31__TCLK3 PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__PWML0 PINMUX_PIN(PIN_PB31, 5, 1)
+#define PIN_PB31__FLEXCOM8_IO1 PINMUX_PIN(PIN_PB31, 6, 4)
+#define PIN_PC0 64
+#define PIN_PC0__GPIO PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__SDMMC1_DAT1 PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__FLEXCOM3_IO0 PINMUX_PIN(PIN_PC0, 2, 2)
+#define PIN_PC0__TIOA4 PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__PWML1 PINMUX_PIN(PIN_PC0, 5, 1)
+#define PIN_PC0__FLEXCOM9_IO0 PINMUX_PIN(PIN_PC0, 6, 4)
+#define PIN_PC1 65
+#define PIN_PC1__GPIO PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__SDMMC1_DAT2 PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC1, 2, 2)
+#define PIN_PC1__TIOB4 PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__PWMH1 PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__FLEXCOM9_IO1 PINMUX_PIN(PIN_PC1, 6, 4)
+#define PIN_PC2 66
+#define PIN_PC2__GPIO PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__SDMMC1_DAT3 PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__FLEXCOM4_IO0 PINMUX_PIN(PIN_PC2, 2, 2)
+#define PIN_PC2__TCLK4 PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__PWML2 PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__FLEXCOM10_IO0 PINMUX_PIN(PIN_PC2, 6, 4)
+#define PIN_PC3 67
+#define PIN_PC3__GPIO PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__SDMMC1_WP PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__FLEXCOM4_IO1 PINMUX_PIN(PIN_PC3, 2, 2)
+#define PIN_PC3__TIOA5 PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__PWMH2 PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__FLEXCOM10_IO1 PINMUX_PIN(PIN_PC3, 6, 4)
+#define PIN_PC4 68
+#define PIN_PC4__GPIO PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__SDMMC1_CD PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__FLEXCOM4_IO2 PINMUX_PIN(PIN_PC4, 2, 2)
+#define PIN_PC4__FLEXCOM9_IO6 PINMUX_PIN(PIN_PC4, 3, 2)
+#define PIN_PC4__TIOB5 PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__PWML3 PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__FLEXCOM11_IO0 PINMUX_PIN(PIN_PC4, 6, 4)
+#define PIN_PC5 69
+#define PIN_PC5__GPIO PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__SDMMC1_1V8SEL PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__FLEXCOM4_IO3 PINMUX_PIN(PIN_PC5, 2, 2)
+#define PIN_PC5__FLEXCOM6_IO5 PINMUX_PIN(PIN_PC5, 3, 2)
+#define PIN_PC5__TCLK5 PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__PWMH3 PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__FLEXCOM11_IO1 PINMUX_PIN(PIN_PC5, 6, 4)
+#define PIN_PC6 70
+#define PIN_PC6__GPIO PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__FLEXCOM4_IO4 PINMUX_PIN(PIN_PC6, 2, 2)
+#define PIN_PC6__FLEXCOM6_IO6 PINMUX_PIN(PIN_PC6, 3, 2)
+#define PIN_PC7 71
+#define PIN_PC7__GPIO PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__I2SMCC0_DIN0 PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__FLEXCOM7_IO0 PINMUX_PIN(PIN_PC7, 2, 2)
+#define PIN_PC8 72
+#define PIN_PC8__GPIO PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__I2SMCC0_DIN1 PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__FLEXCOM7_IO1 PINMUX_PIN(PIN_PC8, 2, 2)
+#define PIN_PC9 73
+#define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__I2SMCC0_DOUT3 PINMUX_PIN(PIN_PC9, 1, 1)
+#define PIN_PC9__FLEXCOM7_IO2 PINMUX_PIN(PIN_PC9, 2, 2)
+#define PIN_PC9__FLEXCOM1_IO0 PINMUX_PIN(PIN_PC9, 6, 4)
+#define PIN_PC10 74
+#define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__I2SMCC0_DOUT2 PINMUX_PIN(PIN_PC10, 1, 1)
+#define PIN_PC10__FLEXCOM7_IO3 PINMUX_PIN(PIN_PC10, 2, 2)
+#define PIN_PC10__FLEXCOM1_IO1 PINMUX_PIN(PIN_PC10, 6, 4)
+#define PIN_PC11 75
+#define PIN_PC11__GPIO PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__I2SMCC1_CK PINMUX_PIN(PIN_PC11, 1, 1)
+#define PIN_PC11__FLEXCOM7_IO4 PINMUX_PIN(PIN_PC11, 2, 2)
+#define PIN_PC11__FLEXCOM2_IO0 PINMUX_PIN(PIN_PC11, 6, 4)
+#define PIN_PC12 76
+#define PIN_PC12__GPIO PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__I2SMCC1_WS PINMUX_PIN(PIN_PC12, 1, 1)
+#define PIN_PC12__FLEXCOM8_IO2 PINMUX_PIN(PIN_PC12, 2, 2)
+#define PIN_PC12__FLEXCOM2_IO1 PINMUX_PIN(PIN_PC12, 6, 4)
+#define PIN_PC13 77
+#define PIN_PC13__GPIO PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__I2SMCC1_MCK PINMUX_PIN(PIN_PC13, 1, 1)
+#define PIN_PC13__FLEXCOM8_IO1 PINMUX_PIN(PIN_PC13, 2, 2)
+#define PIN_PC13__FLEXCOM3_IO0 PINMUX_PIN(PIN_PC13, 6, 4)
+#define PIN_PC14 78
+#define PIN_PC14__GPIO PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__I2SMCC1_DOUT0 PINMUX_PIN(PIN_PC14, 1, 1)
+#define PIN_PC14__FLEXCOM8_IO0 PINMUX_PIN(PIN_PC14, 2, 2)
+#define PIN_PC14__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC14, 6, 4)
+#define PIN_PC15 79
+#define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__I2SMCC1_DOUT1 PINMUX_PIN(PIN_PC15, 1, 1)
+#define PIN_PC15__FLEXCOM8_IO3 PINMUX_PIN(PIN_PC15, 2, 2)
+#define PIN_PC15__FLEXCOM4_IO0 PINMUX_PIN(PIN_PC15, 6, 4)
+#define PIN_PC16 80
+#define PIN_PC16__GPIO PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__I2SMCC1_DOUT2 PINMUX_PIN(PIN_PC16, 1, 1)
+#define PIN_PC16__FLEXCOM8_IO4 PINMUX_PIN(PIN_PC16, 2, 2)
+#define PIN_PC16__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC16, 6, 4)
+#define PIN_PC17 81
+#define PIN_PC17__GPIO PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__I2SMCC1_DOUT3 PINMUX_PIN(PIN_PC17, 1, 1)
+#define PIN_PC17__EXT_IRQ0 PINMUX_PIN(PIN_PC17, 2, 3)
+#define PIN_PC17__FLEXCOM5_IO0 PINMUX_PIN(PIN_PC17, 6, 4)
+#define PIN_PC18 82
+#define PIN_PC18__GPIO PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__I2SMCC1_DIN0 PINMUX_PIN(PIN_PC18, 1, 1)
+#define PIN_PC18__FLEXCOM9_IO0 PINMUX_PIN(PIN_PC18, 2, 2)
+#define PIN_PC18__FLEXCOM5_IO1 PINMUX_PIN(PIN_PC18, 6, 4)
+#define PIN_PC19 83
+#define PIN_PC19__GPIO PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__I2SMCC1_DIN1 PINMUX_PIN(PIN_PC19, 1, 1)
+#define PIN_PC19__FLEXCOM9_IO1 PINMUX_PIN(PIN_PC19, 2, 2)
+#define PIN_PC19__FLEXCOM6_IO0 PINMUX_PIN(PIN_PC19, 6, 4)
+#define PIN_PC20 84
+#define PIN_PC20__GPIO PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__I2SMCC1_DIN2 PINMUX_PIN(PIN_PC20, 1, 1)
+#define PIN_PC20__FLEXCOM9_IO4 PINMUX_PIN(PIN_PC20, 2, 2)
+#define PIN_PC20__FLEXCOM6_IO1 PINMUX_PIN(PIN_PC20, 6, 4)
+#define PIN_PC21 85
+#define PIN_PC21__GPIO PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__I2SMCC1_DIN3 PINMUX_PIN(PIN_PC21, 1, 1)
+#define PIN_PC21__FLEXCOM9_IO2 PINMUX_PIN(PIN_PC21, 2, 2)
+#define PIN_PC21__D3 PINMUX_PIN(PIN_PC21, 4, 2)
+#define PIN_PC21__FLEXCOM6_IO0 PINMUX_PIN(PIN_PC21, 6, 5)
+#define PIN_PC22 86
+#define PIN_PC22__GPIO PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__I2SMCC0_DIN2 PINMUX_PIN(PIN_PC22, 1, 1)
+#define PIN_PC22__FLEXCOM9_IO3 PINMUX_PIN(PIN_PC22, 2, 2)
+#define PIN_PC22__D4 PINMUX_PIN(PIN_PC22, 4, 2)
+#define PIN_PC22__FLEXCOM6_IO1 PINMUX_PIN(PIN_PC22, 6, 5)
+#define PIN_PC23 87
+#define PIN_PC23__GPIO PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__I2SMCC0_DIN3 PINMUX_PIN(PIN_PC23, 1, 1)
+#define PIN_PC23__FLEXCOM0_IO5 PINMUX_PIN(PIN_PC23, 2, 3)
+#define PIN_PC23__D5 PINMUX_PIN(PIN_PC23, 4, 2)
+#define PIN_PC23__FLEXCOM7_IO0 PINMUX_PIN(PIN_PC23, 6, 5)
+#define PIN_PC24 88
+#define PIN_PC24__GPIO PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__FLEXCOM0_IO6 PINMUX_PIN(PIN_PC24, 2, 3)
+#define PIN_PC24__EXT_IRQ1 PINMUX_PIN(PIN_PC24, 3, 3)
+#define PIN_PC24__D6 PINMUX_PIN(PIN_PC24, 4, 2)
+#define PIN_PC24__FLEXCOM7_IO1 PINMUX_PIN(PIN_PC24, 6, 5)
+#define PIN_PC25 89
+#define PIN_PC25__GPIO PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__NTRST PINMUX_PIN(PIN_PC25, 1, 1)
+#define PIN_PC26 90
+#define PIN_PC26__GPIO PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__TCK_SWCLK PINMUX_PIN(PIN_PC26, 1, 1)
+#define PIN_PC27 91
+#define PIN_PC27__GPIO PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__TMS_SWDIO PINMUX_PIN(PIN_PC27, 1, 1)
+#define PIN_PC28 92
+#define PIN_PC28__GPIO PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__TDI PINMUX_PIN(PIN_PC28, 1, 1)
+#define PIN_PC29 93
+#define PIN_PC29__GPIO PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__TDO PINMUX_PIN(PIN_PC29, 1, 1)
+#define PIN_PC30 94
+#define PIN_PC30__GPIO PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__FLEXCOM10_IO0 PINMUX_PIN(PIN_PC30, 2, 2)
+#define PIN_PC31 95
+#define PIN_PC31__GPIO PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__FLEXCOM10_IO1 PINMUX_PIN(PIN_PC31, 2, 2)
+#define PIN_PD0 96
+#define PIN_PD0__GPIO PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__FLEXCOM11_IO0 PINMUX_PIN(PIN_PD0, 2, 2)
+#define PIN_PD1 97
+#define PIN_PD1__GPIO PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__FLEXCOM11_IO1 PINMUX_PIN(PIN_PD1, 2, 2)
+#define PIN_PD2 98
+#define PIN_PD2__GPIO PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__SDMMC2_RSTN PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__PCK0 PINMUX_PIN(PIN_PD2, 2, 2)
+#define PIN_PD2__CANTX4 PINMUX_PIN(PIN_PD2, 3, 1)
+#define PIN_PD2__D7 PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__TIOA0 PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__FLEXCOM8_IO0 PINMUX_PIN(PIN_PD2, 6, 5)
+#define PIN_PD3 99
+#define PIN_PD3__GPIO PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__SDMMC2_CMD PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FLEXCOM0_IO0 PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__CANRX4 PINMUX_PIN(PIN_PD3, 3, 1)
+#define PIN_PD3__NANDRDY PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__TIOB0 PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__FLEXCOM8_IO1 PINMUX_PIN(PIN_PD3, 6, 5)
+#define PIN_PD4 100
+#define PIN_PD4__GPIO PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__SDMMC2_CK PINMUX_PIN(PIN_PD4, 1, 1)
+#define PIN_PD4__FLEXCOM0_IO1 PINMUX_PIN(PIN_PD4, 2, 2)
+#define PIN_PD4__CANTX5 PINMUX_PIN(PIN_PD4, 3, 1)
+#define PIN_PD4__NCS3_NANDCS PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__TCLK0 PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__FLEXCOM9_IO0 PINMUX_PIN(PIN_PD4, 6, 5)
+#define PIN_PD5 101
+#define PIN_PD5__GPIO PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__SDMMC2_DAT0 PINMUX_PIN(PIN_PD5, 1, 1)
+#define PIN_PD5__FLEXCOM0_IO2 PINMUX_PIN(PIN_PD5, 2, 2)
+#define PIN_PD5__CANRX5 PINMUX_PIN(PIN_PD5, 3, 1)
+#define PIN_PD5__NWE_NWR0_NANDWE PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__TIOA1 PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__FLEXCOM9_IO1 PINMUX_PIN(PIN_PD5, 6, 5)
+#define PIN_PD6 102
+#define PIN_PD6__GPIO PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__SDMMC2_DAT1 PINMUX_PIN(PIN_PD6, 1, 1)
+#define PIN_PD6__FLEXCOM0_IO3 PINMUX_PIN(PIN_PD6, 2, 2)
+#define PIN_PD6__SPDIF_RX PINMUX_PIN(PIN_PD6, 3, 3)
+#define PIN_PD6__NRD_NANDOE PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__TIOB1 PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__FLEXCOM10_IO0 PINMUX_PIN(PIN_PD6, 6, 5)
+#define PIN_PD7 103
+#define PIN_PD7__GPIO PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__SDMMC2_DAT2 PINMUX_PIN(PIN_PD7, 1, 1)
+#define PIN_PD7__FLEXCOM0_IO4 PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__SPDIF_TX PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__A21_NANDALE PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__TCLK1 PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__FLEXCOM10_IO1 PINMUX_PIN(PIN_PD7, 6, 5)
+#define PIN_PD8 104
+#define PIN_PD8__GPIO PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__SDMMC2_DAT3 PINMUX_PIN(PIN_PD8, 1, 1)
+#define PIN_PD8__I2SMCC0_DIN0 PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__A11_NANDCLE PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__TIOA2 PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__FLEXCOM11_IO0 PINMUX_PIN(PIN_PD8, 6, 5)
+#define PIN_PD9 105
+#define PIN_PD9__GPIO PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__SDMMC2_WP PINMUX_PIN(PIN_PD9, 1, 1)
+#define PIN_PD9__I2SMCC0_DIN1 PINMUX_PIN(PIN_PD9, 3, 2)
+#define PIN_PD9__D0 PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__TIOB2 PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD9__FLEXCOM11_IO1 PINMUX_PIN(PIN_PD9, 6, 5)
+#define PIN_PD10 106
+#define PIN_PD10__GPIO PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__SDMMC2_CD PINMUX_PIN(PIN_PD10, 1, 1)
+#define PIN_PD10__PCK6 PINMUX_PIN(PIN_PD10, 2, 2)
+#define PIN_PD10__I2SMCC0_DIN2 PINMUX_PIN(PIN_PD10, 3, 2)
+#define PIN_PD10__D1 PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__TCLK2 PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD10__FLEXCOM0_IO0 PINMUX_PIN(PIN_PD10, 6, 3)
+#define PIN_PD11 107
+#define PIN_PD11__GPIO PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__SDMMC2_1V8SEL PINMUX_PIN(PIN_PD11, 1, 1)
+#define PIN_PD11__PCK7 PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__I2SMCC0_DIN3 PINMUX_PIN(PIN_PD11, 3, 2)
+#define PIN_PD11__D2 PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__TIOA3 PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__FLEXCOM0_IO1 PINMUX_PIN(PIN_PD11, 6, 3)
+#define PIN_PD12 108
+#define PIN_PD12__GPIO PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__PCK1 PINMUX_PIN(PIN_PD12, 1, 2)
+#define PIN_PD12__FLEXCOM1_IO0 PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__CANTX0 PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__TIOB3 PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD13 109
+#define PIN_PD13__GPIO PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__I2SMCC0_CK PINMUX_PIN(PIN_PD13, 1, 2)
+#define PIN_PD13__FLEXCOM1_IO1 PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__PWML0 PINMUX_PIN(PIN_PD13, 3, 4)
+#define PIN_PD13__CANRX0 PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__TCLK3 PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD14 110
+#define PIN_PD14__GPIO PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__I2SMCC0_MCK PINMUX_PIN(PIN_PD14, 1, 2)
+#define PIN_PD14__FLEXCOM1_IO2 PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__PWMH0 PINMUX_PIN(PIN_PD14, 3, 4)
+#define PIN_PD14__CANTX1 PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__TIOA4 PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__FLEXCOM2_IO0 PINMUX_PIN(PIN_PD14, 6, 5)
+#define PIN_PD15 111
+#define PIN_PD15__GPIO PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__I2SMCC0_WS PINMUX_PIN(PIN_PD15, 1, 2)
+#define PIN_PD15__FLEXCOM1_IO3 PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__PWML1 PINMUX_PIN(PIN_PD15, 3, 4)
+#define PIN_PD15__CANRX1 PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__TIOB4 PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__FLEXCOM2_IO1 PINMUX_PIN(PIN_PD15, 6, 5)
+#define PIN_PD16 112
+#define PIN_PD16__GPIO PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__I2SMCC0_DOUT0 PINMUX_PIN(PIN_PD16, 1, 2)
+#define PIN_PD16__FLEXCOM1_IO4 PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__PWMH1 PINMUX_PIN(PIN_PD16, 3, 4)
+#define PIN_PD16__CANTX2 PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__TCLK4 PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__FLEXCOM3_IO0 PINMUX_PIN(PIN_PD16, 6, 5)
+#define PIN_PD17 113
+#define PIN_PD17__GPIO PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__I2SMCC0_DOUT1 PINMUX_PIN(PIN_PD17, 1, 2)
+#define PIN_PD17__FLEXCOM2_IO0 PINMUX_PIN(PIN_PD17, 2, 2)
+#define PIN_PD17__PWML2 PINMUX_PIN(PIN_PD17, 3, 4)
+#define PIN_PD17__CANRX2 PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__TIOA5 PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__FLEXCOM3_IO1 PINMUX_PIN(PIN_PD17, 6, 5)
+#define PIN_PD18 114
+#define PIN_PD18__GPIO PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__I2SMCC0_DOUT2 PINMUX_PIN(PIN_PD18, 1, 2)
+#define PIN_PD18__FLEXCOM2_IO1 PINMUX_PIN(PIN_PD18, 2, 2)
+#define PIN_PD18__PWMH2 PINMUX_PIN(PIN_PD18, 3, 4)
+#define PIN_PD18__CANTX3 PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__TIOB5 PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__FLEXCOM4_IO0 PINMUX_PIN(PIN_PD18, 6, 5)
+#define PIN_PD19 115
+#define PIN_PD19__GPIO PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__I2SMCC0_DOUT3 PINMUX_PIN(PIN_PD19, 1, 2)
+#define PIN_PD19__FLEXCOM2_IO2 PINMUX_PIN(PIN_PD19, 2, 2)
+#define PIN_PD19__PWML3 PINMUX_PIN(PIN_PD19, 3, 4)
+#define PIN_PD19__CANRX3 PINMUX_PIN(PIN_PD19, 4, 2)
+#define PIN_PD19__TCLK5 PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__FLEXCOM4_IO1 PINMUX_PIN(PIN_PD19, 6, 5)
+#define PIN_PD20 116
+#define PIN_PD20__GPIO PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__PCK0 PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__FLEXCOM2_IO3 PINMUX_PIN(PIN_PD20, 2, 2)
+#define PIN_PD20__PWMH3 PINMUX_PIN(PIN_PD20, 3, 4)
+#define PIN_PD20__CANTX4 PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__FLEXCOM5_IO0 PINMUX_PIN(PIN_PD20, 6, 5)
+#define PIN_PD21 117
+#define PIN_PD21__GPIO PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__PCK1 PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__FLEXCOM2_IO4 PINMUX_PIN(PIN_PD21, 2, 2)
+#define PIN_PD21__CANRX4 PINMUX_PIN(PIN_PD21, 4, 2)
+#define PIN_PD21__FLEXCOM5_IO1 PINMUX_PIN(PIN_PD21, 6, 5)
+#define PIN_PD21__G1_TXEN PINMUX_PIN(PIN_PD21, 7, 1)
+#define PIN_PD22 118
+#define PIN_PD22__GPIO PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__PDMC0_CLK PINMUX_PIN(PIN_PD22, 1, 2)
+#define PIN_PD22__PWMEXTRG0 PINMUX_PIN(PIN_PD22, 3, 4)
+#define PIN_PD22__RD1 PINMUX_PIN(PIN_PD22, 4, 2)
+#define PIN_PD22__CANTX5 PINMUX_PIN(PIN_PD22, 6, 2)
+#define PIN_PD22__G1_TX0 PINMUX_PIN(PIN_PD22, 7, 1)
+#define PIN_PD23 119
+#define PIN_PD23__GPIO PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__PDMC0_DS0 PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__PWMEXTRG1 PINMUX_PIN(PIN_PD23, 3, 4)
+#define PIN_PD23__RF1 PINMUX_PIN(PIN_PD23, 4, 2)
+#define PIN_PD23__ISC_MCK PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__CANRX5 PINMUX_PIN(PIN_PD23, 6, 2)
+#define PIN_PD23__G1_TX1 PINMUX_PIN(PIN_PD23, 7, 1)
+#define PIN_PD24 120
+#define PIN_PD24__GPIO PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__PDMC0_DS1 PINMUX_PIN(PIN_PD24, 1, 2)
+#define PIN_PD24__PWMFI0 PINMUX_PIN(PIN_PD24, 3, 4)
+#define PIN_PD24__RK1 PINMUX_PIN(PIN_PD24, 4, 2)
+#define PIN_PD24__ISC_D0 PINMUX_PIN(PIN_PD24, 5, 2)
+#define PIN_PD24__G1_RXDV PINMUX_PIN(PIN_PD24, 7, 1)
+#define PIN_PD25 121
+#define PIN_PD25__GPIO PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__PDMC1_CLK PINMUX_PIN(PIN_PD25, 1, 2)
+#define PIN_PD25__FLEXCOM5_IO0 PINMUX_PIN(PIN_PD25, 2, 2)
+#define PIN_PD25__PWMFI1 PINMUX_PIN(PIN_PD25, 3, 4)
+#define PIN_PD25__TD1 PINMUX_PIN(PIN_PD25, 4, 2)
+#define PIN_PD25__ISC_D1 PINMUX_PIN(PIN_PD25, 5, 2)
+#define PIN_PD25__G1_RX0 PINMUX_PIN(PIN_PD25, 7, 1)
+#define PIN_PD26 122
+#define PIN_PD26__GPIO PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__PDMC1_DS0 PINMUX_PIN(PIN_PD26, 1, 2)
+#define PIN_PD26__FLEXCOM5_IO1 PINMUX_PIN(PIN_PD26, 2, 2)
+#define PIN_PD26__ADTRG PINMUX_PIN(PIN_PD26, 3, 3)
+#define PIN_PD26__TF1 PINMUX_PIN(PIN_PD26, 4, 2)
+#define PIN_PD26__ISC_D2 PINMUX_PIN(PIN_PD26, 5, 2)
+#define PIN_PD26__G1_RX1 PINMUX_PIN(PIN_PD26, 7, 1)
+#define PIN_PD27 123
+#define PIN_PD27__GPIO PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__PDMC1_DS1 PINMUX_PIN(PIN_PD27, 1, 2)
+#define PIN_PD27__FLEXCOM5_IO2 PINMUX_PIN(PIN_PD27, 2, 2)
+#define PIN_PD27__TIOA0 PINMUX_PIN(PIN_PD27, 3, 3)
+#define PIN_PD27__TK1 PINMUX_PIN(PIN_PD27, 4, 2)
+#define PIN_PD27__ISC_D3 PINMUX_PIN(PIN_PD27, 5, 2)
+#define PIN_PD27__G1_RXER PINMUX_PIN(PIN_PD27, 7, 1)
+#define PIN_PD28 124
+#define PIN_PD28__GPIO PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__RD0 PINMUX_PIN(PIN_PD28, 1, 2)
+#define PIN_PD28__FLEXCOM5_IO3 PINMUX_PIN(PIN_PD28, 2, 2)
+#define PIN_PD28__TIOB0 PINMUX_PIN(PIN_PD28, 3, 3)
+#define PIN_PD28__I2SMCC1_CK PINMUX_PIN(PIN_PD28, 4, 2)
+#define PIN_PD28__ISC_D4 PINMUX_PIN(PIN_PD28, 5, 2)
+#define PIN_PD28__PWML3 PINMUX_PIN(PIN_PD28, 6, 5)
+#define PIN_PD28__G1_MDC PINMUX_PIN(PIN_PD28, 7, 1)
+#define PIN_PD29 125
+#define PIN_PD29__GPIO PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__RF0 PINMUX_PIN(PIN_PD29, 1, 2)
+#define PIN_PD29__FLEXCOM5_IO4 PINMUX_PIN(PIN_PD29, 2, 2)
+#define PIN_PD29__TCLK0 PINMUX_PIN(PIN_PD29, 3, 3)
+#define PIN_PD29__I2SMCC1_WS PINMUX_PIN(PIN_PD29, 4, 2)
+#define PIN_PD29__ISC_D5 PINMUX_PIN(PIN_PD29, 5, 2)
+#define PIN_PD29__PWMH3 PINMUX_PIN(PIN_PD29, 6, 5)
+#define PIN_PD29__G1_MDIO PINMUX_PIN(PIN_PD29, 7, 1)
+#define PIN_PD30 126
+#define PIN_PD30__GPIO PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__RK0 PINMUX_PIN(PIN_PD30, 1, 2)
+#define PIN_PD30__FLEXCOM6_IO0 PINMUX_PIN(PIN_PD30, 2, 2)
+#define PIN_PD30__TIOA1 PINMUX_PIN(PIN_PD30, 3, 3)
+#define PIN_PD30__I2SMCC1_MCK PINMUX_PIN(PIN_PD30, 4, 2)
+#define PIN_PD30__ISC_D6 PINMUX_PIN(PIN_PD30, 5, 2)
+#define PIN_PD30__PWMEXTRG0 PINMUX_PIN(PIN_PD30, 6, 5)
+#define PIN_PD30__G1_TXCK PINMUX_PIN(PIN_PD30, 7, 1)
+#define PIN_PD31 127
+#define PIN_PD31__GPIO PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__TD0 PINMUX_PIN(PIN_PD31, 1, 2)
+#define PIN_PD31__FLEXCOM6_IO1 PINMUX_PIN(PIN_PD31, 2, 2)
+#define PIN_PD31__TIOB1 PINMUX_PIN(PIN_PD31, 3, 3)
+#define PIN_PD31__I2SMCC1_DOUT0 PINMUX_PIN(PIN_PD31, 4, 2)
+#define PIN_PD31__ISC_D7 PINMUX_PIN(PIN_PD31, 5, 2)
+#define PIN_PD31__PWM_EXTRG1 PINMUX_PIN(PIN_PD31, 6, 5)
+#define PIN_PD31__G1_TX2 PINMUX_PIN(PIN_PD31, 7, 1)
+#define PIN_PE0 128
+#define PIN_PE0__GPIO PINMUX_PIN(PIN_PE0, 0, 0)
+#define PIN_PE0__TF0 PINMUX_PIN(PIN_PE0, 1, 2)
+#define PIN_PE0__FLEXCOM6_IO2 PINMUX_PIN(PIN_PE0, 2, 2)
+#define PIN_PE0__TCLK1 PINMUX_PIN(PIN_PE0, 3, 3)
+#define PIN_PE0__I2SMCC1_DOUT1 PINMUX_PIN(PIN_PE0, 4, 2)
+#define PIN_PE0__ISC_HSYNC PINMUX_PIN(PIN_PE0, 5, 2)
+#define PIN_PE0__PWMFI0 PINMUX_PIN(PIN_PE0, 6, 5)
+#define PIN_PE0__G1_TX3 PINMUX_PIN(PIN_PE0, 7, 1)
+#define PIN_PE1 129
+#define PIN_PE1__GPIO PINMUX_PIN(PIN_PE1, 0, 0)
+#define PIN_PE1__TK0 PINMUX_PIN(PIN_PE1, 1, 2)
+#define PIN_PE1__FLEXCOM6_IO3 PINMUX_PIN(PIN_PE1, 2, 2)
+#define PIN_PE1__TIOA2 PINMUX_PIN(PIN_PE1, 3, 3)
+#define PIN_PE1__I2SMCC1_DOUT2 PINMUX_PIN(PIN_PE1, 4, 2)
+#define PIN_PE1__ISC_VSYNC PINMUX_PIN(PIN_PE1, 5, 2)
+#define PIN_PE1__PWMFI1 PINMUX_PIN(PIN_PE1, 6, 5)
+#define PIN_PE1__G1_RX2 PINMUX_PIN(PIN_PE1, 7, 1)
+#define PIN_PE2 130
+#define PIN_PE2__GPIO PINMUX_PIN(PIN_PE2, 0, 0)
+#define PIN_PE2__PWML0 PINMUX_PIN(PIN_PE2, 1, 5)
+#define PIN_PE2__FLEXCOM6_IO4 PINMUX_PIN(PIN_PE2, 2, 2)
+#define PIN_PE2__TIOB2 PINMUX_PIN(PIN_PE2, 3, 3)
+#define PIN_PE2__I2SMCC1_DOUT3 PINMUX_PIN(PIN_PE2, 4, 2)
+#define PIN_PE2__ISC_FIELD PINMUX_PIN(PIN_PE2, 5, 2)
+#define PIN_PE2__G1_RX3 PINMUX_PIN(PIN_PE2, 7, 1)
+#define PIN_PE3 131
+#define PIN_PE3__GPIO PINMUX_PIN(PIN_PE3, 0, 0)
+#define PIN_PE3__PWMH0 PINMUX_PIN(PIN_PE3, 1, 5)
+#define PIN_PE3__FLEXCOM0_IO0 PINMUX_PIN(PIN_PE3, 2, 4)
+#define PIN_PE3__TCLK2 PINMUX_PIN(PIN_PE3, 3, 3)
+#define PIN_PE3__I2SMCC1_DIN0 PINMUX_PIN(PIN_PE3, 4, 2)
+#define PIN_PE3__ISC_PCK PINMUX_PIN(PIN_PE3, 5, 2)
+#define PIN_PE3__G1_RXCK PINMUX_PIN(PIN_PE3, 7, 1)
+#define PIN_PE4 132
+#define PIN_PE4__GPIO PINMUX_PIN(PIN_PE4, 0, 0)
+#define PIN_PE4__PWML1 PINMUX_PIN(PIN_PE4, 1, 5)
+#define PIN_PE4__FLEXCOM0_IO1 PINMUX_PIN(PIN_PE4, 2, 4)
+#define PIN_PE4__TIOA3 PINMUX_PIN(PIN_PE4, 3, 3)
+#define PIN_PE4__I2SMCC1_DIN1 PINMUX_PIN(PIN_PE4, 4, 2)
+#define PIN_PE4__ISC_D8 PINMUX_PIN(PIN_PE4, 5, 2)
+#define PIN_PE4__G1_TXER PINMUX_PIN(PIN_PE4, 7, 1)
+#define PIN_PE5 133
+#define PIN_PE5__GPIO PINMUX_PIN(PIN_PE5, 0, 0)
+#define PIN_PE5__PWMH1 PINMUX_PIN(PIN_PE5, 1, 5)
+#define PIN_PE5__FLEXCOM0_IO2 PINMUX_PIN(PIN_PE5, 2, 4)
+#define PIN_PE5__TIOB3 PINMUX_PIN(PIN_PE5, 3, 3)
+#define PIN_PE5__I2SMCC1_DIN2 PINMUX_PIN(PIN_PE5, 4, 2)
+#define PIN_PE5__ISC_D9 PINMUX_PIN(PIN_PE5, 5, 2)
+#define PIN_PE5__G1_COL PINMUX_PIN(PIN_PE5, 7, 1)
+#define PIN_PE6 134
+#define PIN_PE6__GPIO PINMUX_PIN(PIN_PE6, 0, 0)
+#define PIN_PE6__PWML2 PINMUX_PIN(PIN_PE6, 1, 5)
+#define PIN_PE6__FLEXCOM0_IO3 PINMUX_PIN(PIN_PE6, 2, 4)
+#define PIN_PE6__TCLK3 PINMUX_PIN(PIN_PE6, 3, 3)
+#define PIN_PE6__I2SMCC1_DIN3 PINMUX_PIN(PIN_PE6, 4, 2)
+#define PIN_PE6__ISC_D10 PINMUX_PIN(PIN_PE6, 5, 2)
+#define PIN_PE6__G1_CRS PINMUX_PIN(PIN_PE6, 7, 1)
+#define PIN_PE7 135
+#define PIN_PE7__GPIO PINMUX_PIN(PIN_PE7, 0, 0)
+#define PIN_PE7__PWMH2 PINMUX_PIN(PIN_PE7, 1, 5)
+#define PIN_PE7__FLEXCOM0_IO4 PINMUX_PIN(PIN_PE7, 2, 4)
+#define PIN_PE7__TIOA4 PINMUX_PIN(PIN_PE7, 3, 3)
+#define PIN_PE7__ISC_D11 PINMUX_PIN(PIN_PE7, 5, 2)
+#define PIN_PE7__G1_TSUCOMP PINMUX_PIN(PIN_PE7, 7, 1)
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
+ *
+ * Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
+ *
+ * Author: Eugen Hristev <eugen.hristev@microchip.com>
+ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Microchip SAMA7G5 family SoC";
+ compatible = "microchip,sama7g5";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ };
+
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ usb_clk: usb_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+ };
+
+ vddout25: fixed-regulator-vddout25 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDDOUT25";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ status = "disabled";
+ };
+
+ ns_sram: sram@100000 {
+ compatible = "mmio-sram";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x100000 0x20000>;
+ ranges;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ secumod: secumod@e0004000 {
+ compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
+ reg = <0xe0004000 0x4000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ sfrbu: sfr@e0008000 {
+ compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+ reg = <0xe0008000 0x20>;
+ };
+
+ pioA: pinctrl@e0014000 {
+ compatible = "microchip,sama7g5-pinctrl";
+ reg = <0xe0014000 0x800>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+ };
+
+ pmc: pmc@e0018000 {
+ compatible = "microchip,sama7g5-pmc", "syscon";
+ reg = <0xe0018000 0x200>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <2>;
+ clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+ clock-names = "td_slck", "md_slck", "main_xtal";
+ };
+
+ rtt: rtt@e001d020 {
+ compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+ reg = <0xe001d020 0x30>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk32k 0>;
+ };
+
+ clk32k: clock-controller@e001d050 {
+ compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
+ reg = <0xe001d050 0x4>;
+ clocks = <&slow_xtal>;
+ #clock-cells = <1>;
+ };
+
+ gpbr: gpbr@e001d060 {
+ compatible = "microchip,sama7g5-gpbr", "syscon";
+ reg = <0xe001d060 0x48>;
+ };
+
+ ps_wdt: watchdog@e001d180 {
+ compatible = "microchip,sama7g5-wdt";
+ reg = <0xe001d180 0x24>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk32k 0>;
+ };
+
+ sdmmc0: mmc@e1204000 {
+ compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+ reg = <0xe1204000 0x4000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
+ clock-names = "hclock", "multclk";
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+ assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
+ assigned-clock-rates = <200000000>;
+ microchip,sdcal-inverted;
+ status = "disabled";
+ };
+
+ sdmmc1: mmc@e1208000 {
+ compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+ reg = <0xe1208000 0x4000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
+ clock-names = "hclock", "multclk";
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+ assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
+ assigned-clock-rates = <200000000>;
+ microchip,sdcal-inverted;
+ status = "disabled";
+ };
+
+ sdmmc2: mmc@e120c000 {
+ compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+ reg = <0xe120c000 0x4000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
+ clock-names = "hclock", "multclk";
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+ assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
+ assigned-clock-rates = <200000000>;
+ microchip,sdcal-inverted;
+ status = "disabled";
+ };
+
+ pwm: pwm@e1604000 {
+ compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
+ reg = <0xe1604000 0x4000>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ #pwm-cells = <3>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
+ status = "disabled";
+ };
+
+ spdifrx: spdifrx@e1614000 {
+ #sound-dai-cells = <0>;
+ compatible = "microchip,sama7g5-spdifrx";
+ reg = <0xe1614000 0x4000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
+ dma-names = "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
+ spdiftx: spdiftx@e1618000 {
+ #sound-dai-cells = <0>;
+ compatible = "microchip,sama7g5-spdiftx";
+ reg = <0xe1618000 0x4000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
+ dma-names = "tx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
+ clock-names = "pclk", "gclk";
+ };
+
+ i2s0: i2s@e161c000 {
+ compatible = "microchip,sama7g5-i2smcc";
+ #sound-dai-cells = <0>;
+ reg = <0xe161c000 0x4000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
+ i2s1: i2s@e1620000 {
+ compatible = "microchip,sama7g5-i2smcc";
+ #sound-dai-cells = <0>;
+ reg = <0xe1620000 0x4000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
+ pit64b0: timer@e1800000 {
+ compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+ reg = <0xe1800000 0x4000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
+ clock-names = "pclk", "gclk";
+ };
+
+ pit64b1: timer@e1804000 {
+ compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+ reg = <0xe1804000 0x4000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
+ clock-names = "pclk", "gclk";
+ };
+
+ flx0: flexcom@e1818000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe1818000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe1818000 0x800>;
+ status = "disabled";
+
+ uart0: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+ clock-names = "usart";
+ dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+ <&dma1 AT91_XDMAC_DT_PERID(5)>;
+ dma-names = "tx", "rx";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+
+ flx1: flexcom@e181c000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe181c000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe181c000 0x800>;
+ status = "disabled";
+
+ i2c1: i2c@600 {
+ compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+ atmel,fifo-size = <32>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+ <&dma0 AT91_XDMAC_DT_PERID(8)>;
+ dma-names = "rx", "tx";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+
+ flx3: flexcom@e1824000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe1824000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe1824000 0x800>;
+ status = "disabled";
+
+ uart3: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+ clock-names = "usart";
+ dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
+ <&dma1 AT91_XDMAC_DT_PERID(11)>;
+ dma-names = "tx", "rx";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+
+ trng: rng@e2010000 {
+ compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
+ reg = <0xe2010000 0x100>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
+ status = "disabled";
+ };
+
+ flx4: flexcom@e2018000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe2018000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe2018000 0x800>;
+ status = "disabled";
+
+ uart4: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+ clock-names = "usart";
+ dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+ <&dma1 AT91_XDMAC_DT_PERID(13)>;
+ dma-names = "tx", "rx";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ flx7: flexcom@e2024000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe2024000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe2024000 0x800>;
+ status = "disabled";
+
+ uart7: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+ clock-names = "usart";
+ dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+ <&dma1 AT91_XDMAC_DT_PERID(19)>;
+ dma-names = "tx", "rx";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ gmac0: ethernet@e2800000 {
+ compatible = "microchip,sama7g5-gem";
+ reg = <0xe2800000 0x1000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
+ clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
+ assigned-clock-rates = <125000000>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet@e2804000 {
+ compatible = "microchip,sama7g5-emac";
+ reg = <0xe2804000 0x1000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
+ clock-names = "pclk", "hclk";
+ status = "disabled";
+ };
+
+ dma0: dma-controller@e2808000 {
+ compatible = "microchip,sama7g5-dma";
+ reg = <0xe2808000 0x1000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+ clock-names = "dma_clk";
+ status = "disabled";
+ };
+
+ dma1: dma-controller@e280c000 {
+ compatible = "microchip,sama7g5-dma";
+ reg = <0xe280c000 0x1000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+ clock-names = "dma_clk";
+ status = "disabled";
+ };
+
+ /* Place dma2 here despite it's address */
+ dma2: dma-controller@e1200000 {
+ compatible = "microchip,sama7g5-dma";
+ reg = <0xe1200000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+ clock-names = "dma_clk";
+ dma-requests = <0>;
+ status = "disabled";
+ };
+
+ flx8: flexcom@e2818000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe2818000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe2818000 0x800>;
+ status = "disabled";
+
+ i2c8: i2c@600 {
+ compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+ atmel,fifo-size = <32>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
+ <&dma0 AT91_XDMAC_DT_PERID(22)>;
+ dma-names = "rx", "tx";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+
+ flx9: flexcom@e281c000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe281c000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe281c000 0x800>;
+ status = "disabled";
+
+ i2c9: i2c@600 {
+ compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+ atmel,fifo-size = <32>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
+ <&dma0 AT91_XDMAC_DT_PERID(24)>;
+ dma-names = "rx", "tx";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+
+ flx11: flexcom@e2824000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe2824000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe2824000 0x800>;
+ status = "disabled";
+
+ spi11: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+ clock-names = "spi_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,fifo-size = <32>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>,
+ <&dma0 AT91_XDMAC_DT_PERID(28)>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+ };
+
+ gic: interrupt-controller@e8c11000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xe8c11000 0x1000>,
+ <0xe8c12000 0x2000>;
+ };
+ };
+};
#io-channel-cells = <1>;
/* GPADC channels */
- bat_ctrl: channel@01 {
+ bat_ctrl: channel@1 {
reg = <0x01>;
};
- btemp_ball: channel@02 {
+ btemp_ball: channel@2 {
reg = <0x02>;
};
- main_charger_v: channel@03 {
+ main_charger_v: channel@3 {
reg = <0x03>;
};
- acc_detect1: channel@04 {
+ acc_detect1: channel@4 {
reg = <0x04>;
};
- acc_detect2: channel@05 {
+ acc_detect2: channel@5 {
reg = <0x05>;
};
- adc_aux1: channel@06 {
+ adc_aux1: channel@6 {
reg = <0x06>;
};
- adc_aux2: channel@07 {
+ adc_aux2: channel@7 {
reg = <0x07>;
};
- main_batt_v: channel@08 {
+ main_batt_v: channel@8 {
reg = <0x08>;
};
- vbus_v: channel@09 {
+ vbus_v: channel@9 {
reg = <0x09>;
};
- main_charger_c: channel@0a {
+ main_charger_c: channel@a {
reg = <0x0a>;
};
- usb_charger_c: channel@0b {
+ usb_charger_c: channel@b {
reg = <0x0b>;
};
- bk_bat_v: channel@0c {
+ bk_bat_v: channel@c {
reg = <0x0c>;
};
- die_temp: channel@0d {
+ die_temp: channel@d {
reg = <0x0d>;
};
- usb_id: channel@0e {
+ usb_id: channel@e {
reg = <0x0e>;
};
xtal_temp: channel@12 {
battery = <&ab8500_battery>;
};
- ab8500_usb {
+ ab8500_usb: ab8500_usb {
compatible = "stericsson,ab8500-usb";
interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
<96 IRQ_TYPE_LEVEL_HIGH>,
musb_1v8-supply = <&db8500_vsmps2_reg>;
clocks = <&prcmu_clk PRCMU_SYSCLK>;
clock-names = "sysclk";
+ #phy-cells = <0>;
};
ab8500-ponkey {
vana-supply = <&ab8500_ldo_ana_reg>;
};
};
+
+ usb_per5@a03e0000 {
+ phys = <&ab8500_usb>;
+ phy-names = "usb";
+ };
};
};
#io-channel-cells = <1>;
/* GPADC channels */
- bat_ctrl: channel@01 {
+ bat_ctrl: channel@1 {
reg = <0x01>;
};
- btemp_ball: channel@02 {
+ btemp_ball: channel@2 {
reg = <0x02>;
};
- acc_detect1: channel@04 {
+ acc_detect1: channel@4 {
reg = <0x04>;
};
- acc_detect2: channel@05 {
+ acc_detect2: channel@5 {
reg = <0x05>;
};
- adc_aux1: channel@06 {
+ adc_aux1: channel@6 {
reg = <0x06>;
};
- adc_aux2: channel@07 {
+ adc_aux2: channel@7 {
reg = <0x07>;
};
- main_batt_v: channel@08 {
+ main_batt_v: channel@8 {
reg = <0x08>;
};
- vbus_v: channel@09 {
+ vbus_v: channel@9 {
reg = <0x09>;
};
- charger_c: channel@0b {
+ charger_c: channel@b {
reg = <0x0b>;
};
- bk_bat_v: channel@0c {
+ bk_bat_v: channel@c {
reg = <0x0c>;
};
- die_temp: channel@0d {
+ die_temp: channel@d {
reg = <0x0d>;
};
- usb_id: channel@0e {
+ usb_id: channel@e {
reg = <0x0e>;
};
};
musb_1v8-supply = <&db8500_vsmps2_reg>;
clocks = <&prcmu_clk PRCMU_SYSCLK>;
clock-names = "sysclk";
+ #phy-cells = <0>;
};
ab8500-ponkey {
vana-supply = <&ab8500_ldo_ana_reg>;
};
};
+
+ usb_per5@a03e0000 {
+ phys = <&ab8500_usb>;
+ phy-names = "usb";
+ };
};
};
/ {
cpus {
cpu@300 {
- /* cpufreq controls */
operating-points = <998400 0
- 800000 0
- 400000 0
- 200000 0>;
+ 798720 0
+ 399360 0
+ 199680 0>;
};
};
ranges;
/* Modem trace memory */
- ram@06000000 {
+ ram@6000000 {
reg = <0x06000000 0x00f00000>;
no-map;
};
/* Modem shared memory */
- ram@06f00000 {
+ ram@6f00000 {
reg = <0x06f00000 0x00100000>;
no-map;
};
/* Modem private memory */
- ram@07000000 {
+ ram@7000000 {
reg = <0x07000000 0x01000000>;
no-map;
};
/ {
cpus {
cpu@300 {
- /* cpufreq controls */
operating-points = <1152000 0
- 800000 0
- 400000 0
- 200000 0>;
+ 798720 0
+ 399360 0
+ 199680 0>;
};
};
ranges;
/* Modem trace memory */
- ram@06000000 {
+ ram@6000000 {
reg = <0x06000000 0x00f00000>;
no-map;
};
/* Modem shared memory */
- ram@06f00000 {
+ ram@6f00000 {
reg = <0x06f00000 0x00100000>;
no-map;
};
/* Modem private memory */
- ram@07000000 {
+ ram@7000000 {
reg = <0x07000000 0x01000000>;
no-map;
};
/ {
cpus {
cpu@300 {
- /* cpufreq controls */
- operating-points = <1152000 0
- 800000 0
- 400000 0
- 200000 0>;
+ operating-points = <998400 0
+ 798720 0
+ 399360 0
+ 199680 0>;
};
};
};
i2c2 {
+ i2c2_b_1_default: i2c2_b_1_default {
+ default_mux {
+ function = "i2c2";
+ groups = "i2c2_b_1";
+ };
+ default_cfg1 {
+ pins = "GPIO8_AD5", "GPIO9_AE4"; /* SDA/SCL */
+ ste,config = <&in_nopull>;
+ };
+ };
+
+ i2c2_b_1_sleep: i2c2_b_1_sleep {
+ sleep_cfg1 {
+ pins = "GPIO8_AD5", "GPIO9_AE4"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+
i2c2_b_2_default: i2c2_b_2_default {
default_mux {
function = "i2c2";
bus-width = <8>;
cap-mmc-highspeed;
non-removable;
+ no-sdio;
+ no-sd;
vmmc-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mc2_a_1_default>;
bus-width = <8>;
cap-mmc-highspeed;
non-removable;
+ no-sdio;
+ no-sd;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mc4_a_1_default>;
max-frequency = <100000000>;
bus-width = <8>;
cap-mmc-highspeed;
+ no-sdio;
+ no-sd;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mc4_a_1_default>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung Galaxy Ace 2 GT-I8160 also known as Codina.
+ *
+ * NOTE: this is the most common variant according to the vendor tree, known
+ * as "R0.0". There appears to be a "R0.4" variant with backlight on GPIO69,
+ * AB8505 and other changes. There is also talk about some variants having a
+ * Samsung S6D27A1 display, indicated by passing a different command line from
+ * the boot loader.
+ *
+ * The Samsung tree further talks about GT-I8160P and GT-I8160chn (China).
+ * The GT-I8160 plain is knonw as the "europe" variant.
+ * The GT-I8160P appears to not use the ST Microelectronics accelerometer.
+ * The GT-I8160chn appears to be the same as the europe variant.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8500.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Samsung Galaxy Ace 2 (GT-I8160)";
+ compatible = "samsung,codina", "st-ericsson,u8500";
+
+ cpus {
+ cpu@300 {
+ /*
+ * This has a frequency cap at ~800 MHz in the firmware.
+ * (Changing this number here will not overclock it.)
+ */
+ operating-points = <798720 0
+ 399360 0
+ 199680 0>;
+ };
+ };
+
+ chosen {
+ stdout-path = &serial2;
+ };
+
+ /* TI TXS0206 level translator for 2.9 V */
+ sd_level_translator: regulator-gpio {
+ compatible = "regulator-fixed";
+
+ /* GPIO87 EN */
+ gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ regulator-name = "sd-level-translator";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-type = "voltage";
+
+ startup-delay-us = <200>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_level_translator_default>;
+ };
+
+ /* External LDO MIC5366-3.3YMT for eMMC */
+ ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VMEM_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <5000>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_ldo_en_default_mode>;
+ };
+
+ /*
+ * External Ricoh "TSP" regulator for the touchscreen.
+ * One GPIO line controls two voltages of 3.3V and 1.8V
+ * this line is known as "TSP_LDO_ON1" in the schematics.
+ */
+ ldo_tsp_3v3_reg: regulator-gpio-tsp-ldo-3v3 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "LDO_TSP_A3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /* GPIO94 controls this regulator */
+ gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ /* 70 ms power-on delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_ldo_en_default_mode>;
+ };
+ ldo_tsp_1v8_reg: regulator-gpio-tsp-ldo-1v8 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_TSP_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* GPIO94 controls this regulator */
+ gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ /* 70 ms power-on delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_ldo_en_default_mode>;
+ };
+
+ /*
+ * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
+ * LCD_PWR_EN controls both a 3.0V and 1.8V output.
+ */
+ lcd_3v0_reg: regulator-gpio-lcd-3v0 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_LCD_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ /* GPIO219 controls this regulator */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pwr_en_default_mode>;
+ };
+ lcd_1v8_reg: regulator-gpio-lcd-1v8 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_LCD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* GPIO219 controls this regulator too */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pwr_en_default_mode>;
+ };
+
+ /*
+ * This regulator is a GPIO line that drives the Broadcom WLAN
+ * line WL_REG_ON high and enables the internal regulators
+ * inside the chip. Unfortunatley it is erroneously named
+ * WLAN_RST_N on the schematic but it is not a reset line.
+ *
+ * The voltage specified here is only used to determine the OCR mask,
+ * the for the SDIO connector, the chip is actually connected
+ * directly to VBAT.
+ */
+ wl_reg: regulator-gpio-wlan {
+ compatible = "regulator-fixed";
+ regulator-name = "WL_REG_ON";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ startup-delay-us = <100000>;
+ /* GPIO215 (WLAN_RST_N to WL_REG_ON) */
+ gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_ldo_en_default>;
+ };
+
+ vibrator {
+ compatible = "gpio-vibrator";
+ /* GPIO195 "MOT_EN" */
+ enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_default>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default_mode>;
+
+ button-home {
+ linux,code = <KEY_HOME>;
+ label = "HOME";
+ /* GPIO91 */
+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ };
+ button-volup {
+ linux,code = <KEY_VOLUMEUP>;
+ label = "VOL+";
+ /* GPIO67 */
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+ button-voldown {
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "VOL-";
+ /* GPIO92 */
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_leds_default_mode>;
+ touchkey-led {
+ label = "touchkeys";
+ /*
+ * GPIO194 on R0.0, R0.4 does not use this at all, it
+ * will instead turn LDO AUX4 on/off for key led backlighy.
+ * (Line is pulled down on R0.4)
+ */
+ gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ ktd253: backlight {
+ compatible = "kinetic,ktd253";
+ /*
+ * GPIO68 is for R0.0, the board file talks about a TMO variant
+ * (R0.4) using GPIO69.
+ */
+ enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ /* Default to 13/32 brightness */
+ default-brightness = <13>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ktd253_backlight_default_mode>;
+ };
+
+ /* Richtek RT8515GQW Flash LED Driver IC */
+ flash {
+ compatible = "richtek,rt8515";
+ /* GPIO 140 */
+ enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ /* GPIO 141 */
+ ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+ /*
+ * RFS is 16 kOhm and RTS is 100 kOhm giving
+ * the flash max current 343mA and torch max
+ * current 55 mA.
+ */
+ richtek,rfs-ohms = <16000>;
+ richtek,rts-ohms = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_flash_default_mode>;
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ flash-max-microamp = <343750>;
+ led-max-microamp = <55000>;
+ };
+ };
+
+ /* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */
+ i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ magnetometer@c {
+ compatible = "alps,hscdtd008a";
+ reg = <0x0c>;
+ clock-frequency = <400000>;
+
+ avdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+ dvdd-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+ };
+ /* TODO: this should also be used by the SM5103 Camera power management unit */
+ };
+
+ /* Bit-banged I2C on GPIO151 and GPIO152 also called "NFC I2C" */
+ i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_1_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* TODO: add the NFC chip here */
+ };
+
+ spi-gpio-0 {
+ compatible = "spi-gpio";
+ /* Clock on GPIO220, pin SCL */
+ sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+ /* MOSI on GPIO224, pin SDI "slave data in" */
+ mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ /* MISO on GPIO225, pin SDO "slave data out" */
+ miso-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ /* Chip select on GPIO201 */
+ cs-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_gpio_0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Some Codinas (90%) have a WideChips WS2401-based LMS380KF01
+ * display mounted and some 10% has a Samsung S6D27A1 instead.
+ * The boot loader needs to modify this compatible to
+ * correspond to whatever is passed from the early Samsung boot.
+ */
+ panel@0 {
+ compatible = "samsung,lms380kf01";
+ spi-max-frequency = <1200000>;
+ /* TYPE 3: inverse clock polarity and phase */
+ spi-cpha;
+ spi-cpol;
+
+ reg = <0>;
+ vci-supply = <&lcd_3v0_reg>;
+ vccio-supply = <&lcd_1v8_reg>;
+
+ /* Reset on GPIO139 */
+ reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ /* LCD_VGH/LCD_DETECT, ESD IRQ on GPIO93 */
+ interrupt-parent = <&gpio2>;
+ interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_default_mode>;
+ backlight = <&ktd253>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
+
+ soc {
+ /* External Micro SD slot */
+ mmc@80126000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ st,sig-pin-fbclk;
+ full-pwr-cycle;
+ /* MMC is powered by AUX3 1.2V .. 2.91V */
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ /* 2.9 V level translator is using AUX3 at 2.9 V as well */
+ vqmmc-supply = <&sd_level_translator>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc0_a_2_default>;
+ pinctrl-1 = <&mc0_a_2_sleep>;
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+ status = "okay";
+ };
+
+ /* WLAN SDIO channel */
+ mmc@80118000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ non-removable;
+ cap-sd-highspeed;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc1_a_2_default>;
+ pinctrl-1 = <&mc1_a_2_sleep>;
+ /*
+ * GPIO-controlled voltage enablement: this drives
+ * the WL_REG_ON line high when we use this device.
+ * Represented as regulator to fill OCR mask.
+ */
+ vmmc-supply = <&wl_reg>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wifi@1 {
+ /* Actually BRCM4330 */
+ compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ /* GPIO216 WL_HOST_WAKE */
+ interrupt-parent = <&gpio6>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_default_mode>;
+ };
+ };
+
+ /* eMMC */
+ mmc@80005000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ no-sdio;
+ no-sd;
+ vmmc-supply = <&ldo_3v3_reg>;
+ pinctrl-names = "default", "sleep";
+ /*
+ * GPIO130 will be set to input no pull-up resulting in a resistor
+ * pulling the reset high and taking the memory out of reset.
+ */
+ pinctrl-0 = <&mc2_a_1_default>;
+ pinctrl-1 = <&mc2_a_1_sleep>;
+ status = "okay";
+ };
+
+ /* GBF (Bluetooth) UART */
+ uart@80120000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ /* GPIO222 rail BT_VREG_EN to BT_REG_ON */
+ shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+ /* BT_WAKE on GPIO199 */
+ device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ /* BT_HOST_WAKE on GPIO97 */
+ /* FIXME: convert to interrupt */
+ host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ /* BT_RST_N on GPIO209 */
+ reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_default_mode>;
+ };
+ };
+
+ /* GPS UART */
+ uart@80121000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ /* CTS/RTS is not used, CTS is repurposed as GPIO */
+ pinctrl-0 = <&u1rxtx_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep>;
+ /* FIXME: add a device for the GPS here */
+ };
+
+ /* Debugging console UART connected to TSU6111RSVR (FSA880) */
+ uart@80007000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
+ };
+
+ prcmu@80157000 {
+ ab8500 {
+ ab8500_usb {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
+ };
+
+ ab8500-regulators {
+ ab8500_ldo_aux1 {
+ /* Used for VDD for sensors */
+ regulator-name = "V-SENSORS-VDD";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ab8500_ldo_aux2 {
+ /* Used for VIO for sensors */
+ regulator-name = "V-SENSORS-VIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ab8500_ldo_aux3 {
+ /* Used for voltage for external MMC/SD card */
+ regulator-name = "V-MMC-SD";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2910000>;
+ };
+ };
+ };
+ };
+
+ /* I2C0 also known as "AGC I2C" */
+ i2c@80004000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c0_a_1_default>;
+ pinctrl-1 = <&i2c0_a_1_sleep>;
+
+ /* TODO: write bindings and driver for this proximity sensor */
+ proximity@39 {
+ /* Codina has the Mouser TMD2672 */
+ compatible = "mouser,tmd2672";
+ clock-frequency = <400000>;
+ reg = <0x39>;
+
+ /* IRQ on GPIO146 "PS_INT" */
+ interrupt-parent = <&gpio4>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ /* FIXME: needs a VDDIO supply that is connected to a pull-up resistor */
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tms2672_codina_default>;
+ };
+ };
+
+ /* I2C1 on GPIO16 and GPIO17 also called "MUS I2C" */
+ i2c@80122000 {
+ status = "okay";
+ pinctrl-names = "default","sleep";
+ /* FIXME: If it doesn't work try what we use on Gavini */
+ pinctrl-0 = <&i2c1_b_2_default>;
+ pinctrl-1 = <&i2c1_b_2_sleep>;
+
+ /* Texas Instruments TSU6111 micro USB switch */
+ usb-switch@25 {
+ compatible = "ti,tsu6111";
+ reg = <0x25>;
+ /* Interrupt JACK_INT_N on GPIO95 */
+ interrupt-parent = <&gpio2>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsu6111_codina_default>;
+ };
+ };
+
+ /* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */
+ i2c@80128000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_b_2_default>;
+ pinctrl-1 = <&i2c2_b_2_sleep>;
+
+ lisd3dh@19 {
+ /* ST Microelectronics Accelerometer */
+ compatible = "st,lis3dh-accel";
+ st,drdy-int-pin = <1>;
+ reg = <0x19>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+ vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+ mount-matrix = "0", "-1", "0",
+ "1", "0", "0",
+ "0", "0", "1";
+ };
+ };
+
+ /* I2C3 */
+ i2c@80110000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
+
+ /* TODO: write bindings and driver for this touchscreen */
+
+ /* Zinitix BT404 ISP part */
+ isp@50 {
+ compatible = "zinitix,bt404-isp";
+ reg = <0x50>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_default>;
+ };
+
+ /* Zinitix BT404 touchscreen, also has the touchkeys for menu and back */
+ touchscreen@20 {
+ compatible = "zinitix,bt404";
+ reg = <0x20>;
+ /* GPIO218 (TSP_INT_1V8) */
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ vcca-supply = <&ldo_tsp_3v3_reg>;
+ vdd-supply = <&ldo_tsp_1v8_reg>;
+ zinitix,mode = <2>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <800>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_default>;
+ };
+ };
+
+ mcde@a0350000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dpi_default_mode>;
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+};
+
+&pinctrl {
+ /*
+ * This extends the MC0_A_2 default config to include
+ * the card detect GPIO217 line.
+ */
+ sdi0 {
+ mc0_a_2_default {
+ default_cfg4 {
+ pins = "GPIO217_AH12"; /* card detect */
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+ sdi2 {
+ /*
+ * This will make the resistor mounted in R0.0 pull up
+ * the reset line and take the eMMC out of reset. On
+ * R0.4 variants, GPIO130 should be set in GPIO mode and
+ * pulled down. (Not connected.)
+ */
+ mc2_a_1_default {
+ default_cfg2 {
+ pins = "GPIO130_C8"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+ /* GPIO that enables the 2.9V SD card level translator */
+ sd-level-translator {
+ sd_level_translator_default: sd_level_translator_default {
+ /* level shifter on GPIO87 */
+ codina_cfg1 {
+ pins = "GPIO87_B3";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the eMMC */
+ emmc-ldo {
+ emmc_ldo_en_default_mode: emmc_ldo_default {
+ /* LDO enable on GPIO223 */
+ codina_cfg1 {
+ pins = "GPIO223_AH9";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIOs for panel control */
+ panel {
+ panel_default_mode: panel_default {
+ codina_cfg1 {
+ /* Reset line */
+ pins = "GPIO139_C9";
+ ste,config = <&gpio_out_lo>;
+ };
+ codina_cfg2 {
+ /* ESD IRQ line "LCD detect" */
+ pins = "GPIO93_B7";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the touchscreen */
+ tsp-ldo {
+ tsp_ldo_en_default_mode: tsp_ldo_default {
+ /* LDO enable on GPIO94 */
+ gavini_cfg1 {
+ pins = "GPIO94_D7";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the LCD display */
+ lcd-ldo {
+ lcd_pwr_en_default_mode: lcd_pwr_en_default {
+ /* LCD_PWR_EN on GPIO219 */
+ codina_cfg1 {
+ pins = "GPIO219_AG10";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the key LED */
+ key-led {
+ gpio_leds_default_mode: en_led_ldo_default {
+ /* EN_LED_LDO on GPIO194 */
+ codina_cfg1 {
+ pins = "GPIO194_AF27";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO that enables the WLAN internal LDO regulators */
+ wlan-ldo {
+ wlan_ldo_en_default: wlan_ldo_default {
+ /* GPIO215 named WLAN_RST_N */
+ codina_cfg1 {
+ pins = "GPIO215_AH13";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* Backlight GPIO */
+ backlight {
+ ktd253_backlight_default_mode: backlight_default {
+ skomer_cfg1 {
+ pins = "GPIO68_E1"; /* LCD_BL_CTRL */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* Flash and torch */
+ flash {
+ gpio_flash_default_mode: flash_default {
+ codina_cfg1 {
+ pins = "GPIO140_B11", "GPIO141_C12";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* GPIO keys */
+ gpio-keys {
+ gpio_keys_default_mode: gpio_keys_default {
+ skomer_cfg1 {
+ pins = "GPIO67_G2", /* VOL UP */
+ "GPIO91_B6", /* HOME */
+ "GPIO92_D6"; /* VOL DOWN */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ /* Interrupt line for the Zinitix BT404 touchscreen */
+ tsp {
+ tsp_default: tsp_default {
+ codina_cfg1 {
+ pins = "GPIO218_AH11"; /* TSP_INT_1V8 */
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* Interrupt line for light/proximity sensor TMS2672 */
+ tms2672 {
+ tms2672_codina_default: tms2672_codina {
+ codina_cfg1 {
+ pins = "GPIO146_D13";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based I2C bus for subpmu */
+ i2c-gpio-0 {
+ i2c_gpio_0_default: i2c_gpio_0 {
+ codina_cfg1 {
+ pins = "GPIO143_D12", "GPIO144_B13";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based I2C bus for the NFC */
+ i2c-gpio-1 {
+ i2c_gpio_1_default: i2c_gpio_1 {
+ codina_cfg1 {
+ pins = "GPIO151_D17", "GPIO152_D16";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based SPI bus for the display */
+ spi-gpio-0 {
+ spi_gpio_0_default: spi_gpio_0_d {
+ codina_cfg1 {
+ pins = "GPIO220_AH10", "GPIO201_AF24", "GPIO224_AG9";
+ ste,config = <&gpio_out_hi>;
+ };
+ codina_cfg2 {
+ pins = "GPIO225_AG8";
+ /* Needs pull down, no pull down resistor on board */
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ spi_gpio_0_sleep: spi_gpio_0_s {
+ codina_cfg1 {
+ pins = "GPIO220_AH10", "GPIO201_AF24",
+ "GPIO224_AG9", "GPIO225_AG8";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ wlan {
+ wlan_default_mode: wlan_default {
+ /* GPIO216 for WL_HOST_WAKE */
+ codina_cfg2 {
+ pins = "GPIO216_AG12";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+ bluetooth {
+ bluetooth_default_mode: bluetooth_default {
+ /* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */
+ codina_cfg1 {
+ pins = "GPIO199_AH23", "GPIO222_AJ9";
+ ste,config = <&gpio_out_lo>;
+ };
+ /* GPIO97 BT_HOST_WAKE */
+ codina_cfg2 {
+ pins = "GPIO97_D9";
+ ste,config = <&gpio_in_nopull>;
+ };
+ /* GPIO209 BT_RST_N */
+ codina_cfg3 {
+ pins = "GPIO209_AG15";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* Interrupt line for TI TSU6111 Micro USB switch */
+ tsu6111 {
+ tsu6111_codina_default: tsu6111_codina {
+ codina_cfg1 {
+ /* GPIO95 used for IRQ */
+ pins = "GPIO95_E8";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ vibrator {
+ vibrator_default: vibrator_default {
+ codina_cfg1 {
+ pins = "GPIO195_AG28"; /* MOT_EN */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ mcde {
+ dpi_default_mode: dpi_default {
+ default_mux1 {
+ /* Mux in all the data lines */
+ function = "lcd";
+ groups =
+ /* Data lines D0-D7 GPIO70..GPIO77 */
+ "lcd_d0_d7_a_1",
+ /* Data lines D8-D11 GPIO78..GPIO81 */
+ "lcd_d8_d11_a_1",
+ /* Data lines D12-D15 GPIO82..GPIO85 */
+ "lcd_d12_d15_a_1",
+ /* Data lines D16-D23 GPIO161..GPIO168 */
+ "lcd_d16_d23_b_1";
+ };
+ default_mux2 {
+ function = "lcda";
+ /* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */
+ groups = "lcdaclk_b_1", "lcda_b_1";
+ };
+ /* Input, no pull-up is the default state for pins used for an alt function */
+ default_cfg1 {
+ pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23";
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung Galaxy Beam GT-I8530 also known as Gavini.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8500.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Samsung Galaxy Beam (GT-I8530)";
+ compatible = "samsung,gavini", "st-ericsson,u8500";
+
+ chosen {
+ stdout-path = &serial2;
+ };
+
+ /* TI TXS0206 level translator for 2.9 V */
+ sd_level_translator: regulator-gpio {
+ compatible = "regulator-fixed";
+
+ /* GPIO193 EN */
+ gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ regulator-name = "sd-level-translator";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-type = "voltage";
+
+ startup-delay-us = <200>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_level_translator_default>;
+ };
+
+ /* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */
+ ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VMEM_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <5000>; // FIXME
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_ldo_en_default_mode>;
+ };
+
+ /*
+ * External Ricoh "TSP" regulator for the touchscreen.
+ * One GPIO line controls two voltages of 3.3V and 1.8V
+ * this line is known as "TSP_LDO_ON1" in the schematics.
+ */
+ ldo_tsp_3v3_reg: regulator-gpio-tsp-ldo-3v3 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "LDO_TSP_A3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /* GPIO94 controls this regulator */
+ gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ /* 70 ms power-on delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_ldo_en_default_mode>;
+ };
+ ldo_tsp_1v8_reg: regulator-gpio-tsp-ldo-1v8 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_TSP_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* GPIO94 controls this regulator */
+ gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ /* 70 ms power-on delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_ldo_en_default_mode>;
+ };
+
+ /*
+ * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
+ * LCD_PWR_EN controls both a 3.0V and 1.8V output.
+ */
+ lcd_3v0_reg: regulator-gpio-lcd-3v0 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_LCD_3V0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ /* GPIO219 controls this regulator */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pwr_en_default_mode>;
+ };
+ lcd_1v8_reg: regulator-gpio-lcd-1v8 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_LCD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* GPIO219 controls this regulator too */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pwr_en_default_mode>;
+ };
+
+ /*
+ * This regulator is a GPIO line that drives the Broadcom WLAN
+ * line WL_REG_ON high and enables the internal regulators
+ * inside the chip. Unfortunatley it is erroneously named
+ * WLAN_RST_N on the schematic but it is not a reset line.
+ *
+ * The voltage specified here is only used to determine the OCR mask,
+ * the for the SDIO connector, the chip is actually connected
+ * directly to VBAT.
+ */
+ wl_reg: regulator-gpio-wlan {
+ compatible = "regulator-fixed";
+ regulator-name = "WL_REG_ON";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ startup-delay-us = <100000>;
+ /* GPIO215 (WLAN_RST_N to WL_REG_ON) */
+ gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_ldo_en_default>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default_mode>;
+
+ button-projector {
+ linux,code = <KEY_SWITCHVIDEOMODE>;
+ label = "Projector";
+ /* GPIO32 "Projector On HotKey" */
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ };
+ button-home {
+ linux,code = <KEY_HOME>;
+ label = "HOME";
+ /* GPIO91 */
+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ };
+ button-volup {
+ linux,code = <KEY_VOLUMEUP>;
+ label = "VOL+";
+ /* GPIO67 */
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+ button-voldown {
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "VOL-";
+ /* GPIO92 */
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ /* Richtek RT8515GQW Flash LED Driver IC */
+ flash {
+ compatible = "richtek,rt8515";
+ /* GPIO 140 */
+ enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ /* GPIO 141 */
+ ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+ /*
+ * RFS is 16 kOhm and RTS is 100 kOhm giving
+ * the flash max current 343mA and torch max
+ * current 55 mA.
+ */
+ richtek,rfs-ohms = <16000>;
+ richtek,rts-ohms = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_flash_default_mode>;
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ flash-max-microamp = <343750>;
+ led-max-microamp = <55000>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_leds_default_mode>;
+ used-led {
+ label = "touchkeys";
+ /* GPIO68 */
+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ ktd259: backlight {
+ compatible = "kinetic,ktd259";
+ /* GPIO20 */
+ enable-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ /* Default to 13/32 brightness */
+ default-brightness = <13>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ktd259_backlight_default_mode>;
+ };
+
+ /* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */
+ i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* TODO: Memsic MMC328 magnetometer */
+ magnetometer@30 {
+ compatible = "memsic,mmc328";
+ reg = <0x30>;
+ /* TODO: if you have the schematic, check if both voltages come from AUX2 */
+ /* VDA 1.8 V */
+ vda-supply = <&ab8500_ldo_aux2_reg>;
+ /* VDD 1.8V */
+ vdd-supply = <&ab8500_ldo_aux2_reg>;
+ /* GPIO204 */
+ reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc328_default>;
+ };
+ /* TODO: this should also be used by the NCP6914 Camera power management unit */
+ };
+
+ /*
+ * TODO: See if we can use the PL023 for this instead.
+ */
+ spi-gpio-0 {
+ compatible = "spi-gpio";
+ /* Clock on GPIO220, pin SCL */
+ sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+ /* MOSI on GPIO224, pin SDI "slave data in" */
+ mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ /* MISO on GPIO225, pin SDO "slave data out" */
+ miso-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ /* Chip select on GPIO223 */
+ cs-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_gpio_0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,lms397kf04";
+ /* 300 ns at read cycle -> 3 MHz max speed */
+ //spi-max-frequency = <3000000>;
+ spi-max-frequency = <1200000>;
+ /* TYPE 3: inverse clock polarity and phase */
+ spi-cpha;
+ spi-cpol;
+
+ reg = <0>;
+ vci-supply = <&lcd_3v0_reg>;
+ vccio-supply = <&lcd_1v8_reg>;
+ /* Reset on GPIO139 */
+ reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_default_mode>;
+ backlight = <&ktd259>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
+
+ /* Bit-banged I2C on GPIO201 and GPIO202 also called "MOT_I2C" */
+ i2c-gpio-2 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio6 10 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio6 9 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_2_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* TODO: add the Immersion ISA1200 I2C device here */
+ };
+
+ /* Bit-banged I2C on GPIO196 and GPIO197 also called "MPR_I2C" */
+ i2c-gpio-3 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio6 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio6 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_3_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* TODO: add the DPP2601 projector I2C device 0x1b here */
+ };
+
+ soc {
+ /* External Micro SD slot */
+ mmc@80126000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ st,sig-pin-fbclk;
+ full-pwr-cycle;
+ /* MMC is powered by AUX3 1.2V .. 2.91V */
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ /* 2.9 V level translator */
+ vqmmc-supply = <&sd_level_translator>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc0_a_2_default>;
+ pinctrl-1 = <&mc0_a_2_sleep>;
+ /* "flash detect" actually card detect */
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+
+ /* WLAN SDIO channel */
+ mmc@80118000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ non-removable;
+ cap-sd-highspeed;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc1_a_2_default>;
+ pinctrl-1 = <&mc1_a_2_sleep>;
+ /*
+ * GPIO-controlled voltage enablement: this drives
+ * the WL_REG_ON line high when we use this device.
+ * Represented as regulator to fill OCR mask.
+ */
+ vmmc-supply = <&wl_reg>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wifi@1 {
+ compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ /* GPIO216 WL_HOST_WAKE */
+ interrupt-parent = <&gpio6>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_default_mode>;
+ };
+ };
+
+ /* eMMC */
+ mmc@80005000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ no-sdio;
+ no-sd;
+ vmmc-supply = <&ldo_3v3_reg>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc2_a_1_default>;
+ pinctrl-1 = <&mc2_a_1_sleep>;
+ status = "okay";
+ };
+
+ /* GBF (Bluetooth) UART */
+ uart@80120000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ /* GPIO222 rail BT_VREG_EN to BT_REG_ON */
+ shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+ /* BT_WAKE on GPIO199 */
+ device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ /* BT_HOST_WAKE on GPIO97 */
+ host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ /* BT_RST_N on GPIO209 */
+ reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_default_mode>;
+ };
+ };
+
+ /* GPS UART */
+ uart@80121000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ /* CTS/RTS is not used, CTS is repurposed as GPIO */
+ pinctrl-0 = <&u1rxtx_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep>;
+ /* FIXME: add a device for the GPS here */
+ };
+
+ /* Debugging console UART connected to TSU6111RSVR (FSA880) */
+ uart@80007000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
+ };
+
+ prcmu@80157000 {
+ ab8500 {
+ ab8500_usb {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
+ };
+
+ ab8500-regulators {
+ ab8500_ldo_aux1 {
+ /* Used for VDD for sensors */
+ regulator-name = "V-SENSORS-VDD";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ab8500_ldo_aux2 {
+ /* Used for VIO for sensors */
+ regulator-name = "V-SENSORS-VIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ab8500_ldo_aux3 {
+ /* Used for voltage for external MMC/SD card */
+ regulator-name = "V-MMC-SD";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2910000>;
+ };
+ };
+ };
+ };
+
+ /* I2C0 */
+ i2c@80004000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c0_a_1_default>;
+ pinctrl-1 = <&i2c0_a_1_sleep>;
+
+ /* FIXME: fix the proximity sensor bindings and driver */
+ proximity@39 {
+ /* Gavini has the GP2A030S00F proximity sensor */
+ compatible = "sharp,gp2a030s00f";
+ clock-frequency = <400000>;
+ reg = <0x39>;
+ /* FIXME: GPIO146 provides power on, IR LED? */
+ };
+
+ gyroscope@68 {
+ compatible = "invensense,mpu3050";
+ reg = <0x68>;
+ /* GPIO226 interrupt */
+ interrupt-parent = <&gpio7>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ mount-matrix = "0", "1", "0",
+ "1", "0", "0",
+ "0", "0", "1";
+ vlogic-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+ vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu3050_default>;
+
+ /*
+ * The MPU-3050 acts as a hub for the
+ * accelerometer.
+ */
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Bosch BMA222E accelerometer */
+ accelerometer@18 {
+ compatible = "bosch,bma222e";
+ reg = <0x18>;
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+ vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+ vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+ };
+ };
+ };
+ };
+
+ /* I2C2 "AGC I2C" */
+ i2c@80128000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_b_1_default>;
+ pinctrl-1 = <&i2c2_b_1_sleep>;
+
+ /* Texas Instruments TSU6111 micro USB switch */
+ usb-switch@25 {
+ compatible = "ti,tsu6111";
+ reg = <0x25>;
+ /* Interrupt JACK_INT_N on GPIO95 */
+ interrupt-parent = <&gpio2>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsu6111_default>;
+ };
+ };
+
+ /* I2C3 */
+ i2c@80110000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
+
+ /* Melfas MMS136 touchscreen */
+ touchscreen@48 {
+ compatible = "melfas,mms136";
+ reg = <0x48>;
+ /* GPIO218 (TSP_INT_1V8) */
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ /* AVDD is "analog supply", 2.57-3.47 V */
+ avdd-supply = <&ldo_tsp_3v3_reg>;
+ /* VDD is "digital supply" 1.71-3.47V */
+ vdd-supply = <&ldo_tsp_1v8_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_default>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <800>;
+ };
+ };
+
+ mcde@a0350000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dpi_default_mode>;
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+};
+
+&pinctrl {
+ /*
+ * This extends the MC0_A_2 default config to include
+ * the card detect GPIO217 line.
+ */
+ sdi0 {
+ mc0_a_2_default {
+ default_cfg4 {
+ pins = "GPIO217_AH12"; /* card detect */
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ mcde {
+ dpi_default_mode: dpi_default {
+ default_mux1 {
+ /* Mux in all the data lines */
+ function = "lcd";
+ groups =
+ /* Data lines D0-D7 GPIO70..GPIO77 */
+ "lcd_d0_d7_a_1",
+ /* Data lines D8-D11 GPIO78..GPIO81 */
+ "lcd_d8_d11_a_1",
+ /* Data lines D12-D15 GPIO82..GPIO85 */
+ "lcd_d12_d15_a_1",
+ /* Data lines D16-D23 GPIO161..GPIO168 */
+ "lcd_d16_d23_b_1";
+ };
+ default_mux2 {
+ function = "lcda";
+ /* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */
+ groups = "lcdaclk_b_1", "lcda_b_1";
+ };
+ /* Input, no pull-up is the default state for pins used for an alt function */
+ default_cfg1 {
+ pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23";
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+ /* GPIO for panel reset control */
+ panel {
+ panel_default_mode: panel_default {
+ gavini_cfg1 {
+ /* Reset line */
+ pins = "GPIO139_C9";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the eMMC */
+ emmc-ldo {
+ emmc_ldo_en_default_mode: emmc_ldo_default {
+ /* LDO enable on GPIO6 */
+ gavini_cfg1 {
+ pins = "GPIO6_AF6";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the touchscreen */
+ tsp-ldo {
+ tsp_ldo_en_default_mode: tsp_ldo_default {
+ /* LDO enable on GPIO94 */
+ gavini_cfg1 {
+ pins = "GPIO94_D7";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* Flash and torch */
+ flash {
+ gpio_flash_default_mode: flash_default {
+ janice_cfg1 {
+ pins = "GPIO140_B11", "GPIO141_C12";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the key LED */
+ gpio-leds {
+ gpio_leds_default_mode: gpio_leds_default {
+ /* EN_LED_LDO on GPIO68 */
+ gavini_cfg1 {
+ pins = "GPIO68_E1";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ backlight {
+ ktd259_backlight_default_mode: backlight_default {
+ skomer_cfg1 {
+ pins = "GPIO20_AB4"; /* LCD_BL_EN */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the touchkeys */
+ touchkey-ldo {
+ tsp_ldo_on2_default_mode: tsp_ldo_on2_default {
+ /* TSP_LDO_ON2 on GPIO89 */
+ gavini_cfg1 {
+ pins = "GPIO89_E6";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ touchkey {
+ touchkey_default_mode: touchkey_default {
+ gavini_cfg1 {
+ /* Interrupt */
+ pins = "GPIO198_AG25";
+ ste,config = <&gpio_in_nopull>;
+ };
+ gavini_cfg2 {
+ /* Reset, actually completely unused (not routed) */
+ pins = "GPIO205_AG23";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the LCD display */
+ lcd-ldo {
+ lcd_pwr_en_default_mode: lcd_pwr_en_default {
+ /* LCD_PWR_EN on GPIO219 */
+ gavini_cfg1 {
+ pins = "GPIO219_AG10";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO that enables the WLAN internal LDO regulators */
+ wlan-ldo {
+ wlan_ldo_en_default: wlan_ldo_default {
+ /* GPIO215 named WLAN_RST_N */
+ gavini_cfg1 {
+ pins = "GPIO215_AH13";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* GPIO that enables the 2.9V SD card level translator */
+ sd-level-translator {
+ sd_level_translator_default: sd_level_translator_default {
+ /* level shifter on GPIO193 */
+ skomer_cfg1 {
+ pins = "GPIO193_AH27";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO keys */
+ gpio-keys {
+ gpio_keys_default_mode: gpio_keys_default {
+ skomer_cfg1 {
+ pins = "GPIO32_V2", /* Projector On HotKey */
+ "GPIO67_G2", /* VOL UP */
+ "GPIO91_B6", /* HOME */
+ "GPIO92_D6"; /* VOL DOWN */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ /* Interrupt line for the Atmel MXT228 touchscreen */
+ tsp {
+ tsp_default: tsp_default {
+ gavini_cfg1 {
+ pins = "GPIO218_AH11"; /* TSP_INT_1V8 */
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* Reset line for the Memsic MMC328 magnetometer */
+ mmc328 {
+ mmc328_default: mmc328_gavini {
+ gavini_cfg1 {
+ pins = "GPIO204_AF23";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* Interrupt line for Invensense MPU3050 gyroscope */
+ mpu3050 {
+ mpu3050_default: mpu3050 {
+ gavini_cfg1 {
+ /* GPIO226 used for IRQ */
+ pins = "GPIO226_AF8";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based I2C bus for magnetometer and NCP6914 */
+ i2c-gpio-0 {
+ i2c_gpio_0_default: i2c_gpio_0 {
+ gavini_cfg1 {
+ pins = "GPIO143_D12", "GPIO144_B13";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based I2C bus for the Immersion ISA1200 */
+ i2c-gpio-2 {
+ i2c_gpio_2_default: i2c_gpio_2 {
+ gavini_cfg1 {
+ pins = "GPIO201_AF24", "GPIO202_AF25";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based I2C bus for the TI DPP2601 */
+ i2c-gpio-3 {
+ i2c_gpio_3_default: i2c_gpio_3 {
+ gavini_cfg1 {
+ pins = "GPIO196_AG26", "GPIO197_AH24";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based SPI bus for the display */
+ spi-gpio-0 {
+ spi_gpio_0_default: spi_gpio_0_d {
+ gavini_cfg1 {
+ pins = "GPIO220_AH10", "GPIO223_AH9", "GPIO224_AG9";
+ ste,config = <&gpio_out_hi>;
+ };
+ gavini_cfg2 {
+ pins = "GPIO225_AG8";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ spi_gpio_0_sleep: spi_gpio_0_s {
+ gavini_cfg1 {
+ pins = "GPIO220_AH10", "GPIO223_AH9",
+ "GPIO224_AG9", "GPIO225_AG8";
+ ste,config = <&gpio_out_hi>;
+ };
+ gavini_cfg2 {
+ pins = "GPIO225_AG8";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ wlan {
+ wlan_default_mode: wlan_default {
+ /* GPIO216 for WL_HOST_WAKE */
+ gavini_cfg2 {
+ pins = "GPIO216_AG12";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+ bluetooth {
+ bluetooth_default_mode: bluetooth_default {
+ /* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */
+ gavini_cfg1 {
+ pins = "GPIO199_AH23", "GPIO222_AJ9";
+ ste,config = <&gpio_out_lo>;
+ };
+ /* GPIO97 BT_HOST_WAKE */
+ gavini_cfg2 {
+ pins = "GPIO97_D9";
+ ste,config = <&gpio_in_nopull>;
+ };
+ /* GPIO209 BT_RST_N */
+ gavini_cfg3 {
+ pins = "GPIO209_AG15";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* Interrupt line for TI TSU6111 Micro USB switch */
+ tsu6111 {
+ tsu6111_default: tsu6111 {
+ gavini_cfg1 {
+ /* GPIO95 used for IRQ */
+ pins = "GPIO95_E8";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+};
non-removable;
cap-mmc-highspeed;
mmc-ddr-1_8v;
+ no-sdio;
+ no-sd;
vmmc-supply = <&vmem_3v3>;
non-removable;
cap-mmc-highspeed;
mmc-ddr-1_8v;
+ no-sdio;
+ no-sd;
vmmc-supply = <&ldo_3v3_reg>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mc2_a_1_default>;
#size-cells = <0>;
/* Bosch BMA222 accelerometer */
- accelerometer@08 {
+ accelerometer@8 {
compatible = "bosch,bma222";
reg = <0x08>;
mount-matrix = "0", "1", "0",
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung Galaxy Amp SGH-I407 also known as Kyle.
+ *
+ * The code also refers to "Kyle AT&T" reflecting that this mobile phone
+ * was customized for the AT&T subsidiary Aio Wireless (All In One) and
+ * offered by the company in 2013.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Samsung Galaxy Amp (SGH-I407)";
+ compatible = "samsung,kyle", "st-ericsson,u8500";
+
+ chosen {
+ stdout-path = &serial2;
+ };
+
+ /* TI TXS0206 level translator for 2.9 V */
+ sd_level_translator: regulator-gpio {
+ compatible = "regulator-fixed";
+
+ /* GPIO87 EN */
+ gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ regulator-name = "sd-level-translator";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-type = "voltage";
+
+ startup-delay-us = <200>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_level_translator_default>;
+ };
+
+ /* External LDO MIC5366-3.3YMT for eMMC */
+ ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "en-3v3-fixed-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <5000>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_ldo_en_default_mode>;
+ };
+
+ /*
+ * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
+ * LCD_PWR_EN controls both a 3.0V and 1.8V output.
+ */
+ lcd_3v0_reg: regulator-gpio-lcd-3v0 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_LCD_3V0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ /* GPIO219 controls this regulator */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pwr_en_default_mode>;
+ };
+ lcd_1v8_reg: regulator-gpio-lcd-1v8 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_LCD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* GPIO219 controls this regulator too */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pwr_en_default_mode>;
+ };
+
+ wlan_en: regulator-gpio-wlan-en {
+ compatible = "regulator-fixed";
+ regulator-name = "wl-reg-on";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ startup-delay-us = <200000>;
+ /* GPIO215 WLAN_EN */
+ gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_en_default_mode>;
+ };
+
+ vibrator {
+ compatible = "gpio-vibrator";
+ enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_default>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default_mode>;
+
+ button-home {
+ linux,code = <KEY_HOME>;
+ label = "HOME";
+ /* GPIO91 */
+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ };
+ button-volup {
+ linux,code = <KEY_VOLUMEUP>;
+ label = "VOL+";
+ /* GPIO67 */
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+ button-voldown {
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "VOL-";
+ /* GPIO92 */
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ktd253: backlight {
+ compatible = "kinetic,ktd253";
+ /* GPIO 69 */
+ enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ /* Default to 13/32 brightness */
+ default-brightness = <13>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_backlight_default_mode>;
+ };
+
+ /* Richtek RT8515GQW Flash LED Driver IC */
+ flash {
+ compatible = "richtek,rt8515";
+ /* GPIO 140 */
+ enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ /* GPIO 141 */
+ ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+ /*
+ * RFS is 16 kOhm and RTS is 100 kOhm giving
+ * the flash max current 343mA and torch max
+ * current 55 mA.
+ */
+ richtek,rfs-ohms = <16000>;
+ richtek,rts-ohms = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_flash_default_mode>;
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ flash-max-microamp = <343750>;
+ led-max-microamp = <55000>;
+ };
+ };
+
+ i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* TODO: this should be used by the NCP6914 Camera power management unit */
+ };
+
+ i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_1_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ magnetometer@c {
+ compatible = "alps,hscdtd008a";
+ reg = <0x0c>;
+ avdd-supply = <&ab8500_ldo_aux1_reg>;
+ dvdd-supply = <&ab8500_ldo_aux6_reg>;
+ };
+ };
+
+ soc {
+ // External Micro SD slot
+ mmc@80126000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ st,sig-pin-fbclk;
+ full-pwr-cycle;
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ vqmmc-supply = <&sd_level_translator>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc0_a_1_default>;
+ pinctrl-1 = <&mc0_a_1_sleep>;
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+ status = "okay";
+ };
+
+ // WLAN SDIO channel
+ mmc@80118000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ non-removable;
+ cap-sd-highspeed;
+ vmmc-supply = <&wlan_en>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc1_a_2_default>;
+ pinctrl-1 = <&mc1_a_2_sleep>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ /* GPIO216 WL_HOST_WAKE */
+ interrupt-parent = <&gpio6>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_default_mode>;
+ };
+ };
+
+ /*
+ * eMMC seems to be mostly Samsung KLM4G1YE4C "4YMD1R"
+ */
+ mmc@80005000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ no-sdio;
+ no-sd;
+ /* From datasheet page 26 figure 9: 300 ms set-up time for 4GB */
+ post-power-on-delay-ms = <300>;
+ vmmc-supply = <&ldo_3v3_reg>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc2_a_1_default>;
+ pinctrl-1 = <&mc2_a_1_sleep>;
+
+ status = "okay";
+ };
+
+ /* GBF (Bluetooth) UART */
+ uart@80120000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
+ status = "okay";
+
+ bluetooth {
+ /* BCM4334B0 actually */
+ compatible = "brcm,bcm4330-bt";
+ shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_default_mode>;
+ };
+ };
+
+ /* GPF UART */
+ uart@80121000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+ };
+
+ /* Debugging console UART connected to AB8505 USB */
+ uart@80007000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
+ };
+
+ prcmu@80157000 {
+ ab8505 {
+ ab8500_usb {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
+ };
+
+ ab8505-regulators {
+ ab8500_ldo_aux1 {
+ /* Used for VDD for sensors */
+ regulator-name = "AUX1";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ab8500_ldo_aux2 {
+ /* Supplies the MMS touchscreen only with 3.3V */
+ regulator-name = "AUX2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ab8500_ldo_aux3 {
+ /* Used for voltage for external MMC/SD card */
+ regulator-name = "AUX3";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ab8500_ldo_aux4 {
+ regulator-name = "AUX4";
+ /* Hammer to 3.3V for the touchscreen */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ab8500_ldo_aux5 {
+ regulator-name = "AUX5";
+ /* 1.8V for the touchscreen */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ab8500_ldo_aux6 {
+ regulator-name = "AUX6";
+ /* Used by sensors for 1.8 V in R0.1+ */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ab8500_ldo_aux8 {
+ /* Unused */
+ regulator-name = "AUX8";
+ };
+ };
+ };
+ };
+
+ /* I2C0 */
+ i2c@80004000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c0_a_1_default>;
+ pinctrl-1 = <&i2c0_a_1_sleep>;
+
+ proximity@44 {
+ compatible = "sharp,gp2ap002s00f";
+ clock-frequency = <400000>;
+ reg = <0x44>;
+
+ interrupt-parent = <&gpio4>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vio-supply = <&ab8500_ldo_aux6_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gp2ap002_kyle_default>;
+ sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>;
+ sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>;
+ };
+ };
+
+ /* I2C2 */
+ i2c@80128000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_b_2_default>;
+ pinctrl-1 = <&i2c2_b_2_sleep>;
+
+ accel@18 {
+ compatible = "bosch,bma254";
+ clock-frequency = <400000>;
+ reg = <0x18>;
+
+ mount-matrix = "-1", "0", "0",
+ "0", "-1", "0",
+ "0", "0", "-1";
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&ab8500_ldo_aux6_reg>;
+ };
+ };
+
+ /* I2C3 */
+ i2c@80110000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
+
+ /* Melfas MMS134S touchscreen */
+ touchscreen@48 {
+ compatible = "melfas,mms134s";
+ reg = <0x48>;
+ /* GPIO218 for IRQ */
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ /* AVDD is "analog supply", 2.57-3.47 V */
+ avdd-supply = <&ab8500_ldo_aux2_reg>;
+ /* VDD is "digital supply" 1.71-3.47V */
+ vdd-supply = <&ab8500_ldo_aux5_reg>;
+
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <800>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mms134s_kyle_default>;
+ };
+ };
+
+ mcde@a0350000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dsi_default_mode>;
+
+ dsi@a0351000 {
+ panel {
+ /*
+ * NT35510-based Hydis HVA40WV1
+ * Apparently some Kyle models can have a NT35512 fitted
+ * here instead. In that case the boot loader needs to
+ * modify this compatible.
+ */
+ compatible = "hydis,hva40wv1", "novatek,nt35510";
+ reg = <0>;
+ /* v_lcd_3v0 2.3-4.8V */
+ vdd-supply = <&lcd_3v0_reg>;
+ /* v_lcd_1v8 1.65-3.3V */
+ vddi-supply = <&lcd_1v8_reg>;
+ /* GPIO 139 */
+ reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&display_default_mode>;
+ backlight = <&ktd253>;
+ };
+ };
+ };
+ };
+};
+
+&pinctrl {
+ /*
+ * This extends the MC0_A_1 default config to include
+ * the card detect GPIO217 line.
+ */
+ sdi0 {
+ mc0_a_1_default {
+ default_cfg1 {
+ /* GPIO18, 19 & 20 unused so pull down */
+ ste,config = <&gpio_in_pd>;
+ };
+ default_cfg4 {
+ pins = "GPIO217_AH12"; /* card detect */
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+
+ mcde {
+ dsi_default_mode: dsi_default {
+ default_mux1 {
+ /* Mux in VSI0 used for DSI TE */
+ function = "lcd";
+ groups = "lcdvsi0_a_1"; /* VSI0 for LCD */
+ };
+ default_cfg1 {
+ pins = "GPIO68_E1"; /* VSI0 */
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+
+ /* Two GPIO lines used by the display */
+ display {
+ display_default_mode: display_default {
+ kyle_cfg1 {
+ /*
+ * OLED DETECT or check_pba, this appears to be high
+ * on "PBA" which I guess is "prototype board A".
+ */
+ pins = "GPIO93_B7";
+ ste,config = <&gpio_in_nopull>;
+ };
+ kyle_cfg2 {
+ pins = "GPIO139_C9";
+ /*
+ * MIPI_DSI0_RESET_N resets the display, leave high
+ * (de-asserted) so we only assert reset explicitly
+ * from the display driver.
+ */
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+
+ /* GPIO that enables the LDO regulator for the LCD display */
+ lcd-ldo {
+ lcd_pwr_en_default_mode: lcd_pwr_en_default {
+ /* LCD_PWR_EN on GPIO219 */
+ kyle_cfg1 {
+ pins = "GPIO219_AG10";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+
+ backlight {
+ gpio_backlight_default_mode: backlight_default {
+ kyle_cfg1 {
+ pins = "GPIO69_E2"; /* LCD_BL_CTRL */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ flash {
+ gpio_flash_default_mode: flash_default {
+ kyle_cfg1 {
+ pins = "GPIO140_B11", "GPIO141_C12";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* GPIO that enables the 2.9V SD card level translator */
+ sd-level-translator {
+ sd_level_translator_default: sd_level_translator_default {
+ /* level shifter on GPIO87 */
+ kyle_cfg1 {
+ pins = "GPIO87_B3";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the eMMC */
+ emmc-ldo {
+ emmc_ldo_en_default_mode: emmc_ldo_default {
+ /* LDO enable on GPIO223 */
+ kyle_cfg1 {
+ pins = "GPIO223_AH9";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO keys */
+ gpio-keys {
+ gpio_keys_default_mode: gpio_keys_default {
+ kyle_cfg1 {
+ pins = "GPIO67_G2", /* VOL UP */
+ "GPIO91_B6", /* HOME */
+ "GPIO92_D6"; /* VOL DOWN */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ /* Interrupt line for light/proximity sensor GP2AP002 */
+ gp2ap002 {
+ gp2ap002_kyle_default: gp2ap002_kyle {
+ kyle_cfg1 {
+ pins = "GPIO146_D13";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based I2C bus for NCP6914 */
+ i2c-gpio-0 {
+ i2c_gpio_0_default: i2c_gpio_0 {
+ kyle_cfg1 {
+ pins = "GPIO143_D12", "GPIO144_B13";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based I2C bus for ALPS HSCD compass */
+ i2c-gpio-1 {
+ i2c_gpio_1_default: i2c_gpio_1 {
+ kyle_cfg1 {
+ pins = "GPIO151_B17", "GPIO152_D16";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ wlan {
+ wlan_default_mode: wlan_default {
+ kyle_cfg1 {
+ pins = "GPIO216_AG12";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ wlan_en_default_mode: wlan_en_default {
+ kyle_cfg2 {
+ pins = "GPIO215_AH13";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ bluetooth {
+ bluetooth_default_mode: bluetooth_default {
+ kyle_cfg1 {
+ pins = "GPIO199_AH23", "GPIO222_AJ9";
+ ste,config = <&gpio_out_lo>;
+ };
+ kyle_cfg2 {
+ pins = "GPIO97_D9";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ vibrator {
+ vibrator_default: vibrator_default {
+ kyle_cfg1 {
+ pins = "GPIO195_AG28"; /* MOT_EN */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* Interrupt line for the Melfas MMS134S touchscreen */
+ touchscreen {
+ mms134s_kyle_default: mms134s_kyle {
+ kyle_cfg1 {
+ pins = "GPIO218_AH11";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+};
+
+&ab8505_gpio {
+ /* Hog a few default settings */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_default>;
+
+ gpio {
+ gpio_default: gpio_default {
+ kyle_mux {
+ /* Change unused pins to GPIO mode */
+ function = "gpio";
+ groups = "gpio3_a_1", /* default: SysClkReq4 */
+ "gpio14_a_1"; /* default: PWMOut1 */
+ };
+ kyle_cfg1 {
+ pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
+ bias-disable;
+ };
+ };
+ };
+};
non-removable;
cap-mmc-highspeed;
mmc-ddr-1_8v;
+ no-sdio;
+ no-sd;
vmmc-supply = <&ldo_3v3_reg>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mc2_a_1_default>;
compatible = "st,stih407-b2120", "st,stih407";
chosen {
- bootargs = "clk_ignore_unused";
stdout-path = &sbc_serial0;
};
compatible = "st,stih407-clkgen-plla9";
clocks = <&clk_sysin>;
-
- clock-output-names = "clockgen-a9-pll-odf";
};
};
clk_s_a0_pll: clk-s-a0-pll {
#clock-cells = <1>;
- compatible = "st,clkgen-pll0";
+ compatible = "st,clkgen-pll0-a0";
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-a0-pll-ofd-0";
- clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
};
clk_s_a0_flexgen: clk-s-a0-flexgen {
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih407-a0";
#clock-cells = <1>;
clocks = <&clk_s_a0_pll 0>,
<&clk_sysin>;
-
- clock-output-names = "clk-ic-lmi0";
- clock-critical = <CLK_IC_LMI0>;
};
};
reg = <0x9103000 0x1000>;
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-c0-fs0-ch0",
- "clk-s-c0-fs0-ch1",
- "clk-s-c0-fs0-ch2",
- "clk-s-c0-fs0-ch3";
- clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
};
clk_s_c0: clockgen-c@9103000 {
clk_s_c0_pll0: clk-s-c0-pll0 {
#clock-cells = <1>;
- compatible = "st,clkgen-pll0";
+ compatible = "st,clkgen-pll0-c0";
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-c0-pll0-odf-0";
- clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
};
clk_s_c0_pll1: clk-s-c0-pll1 {
#clock-cells = <1>;
- compatible = "st,clkgen-pll1";
+ compatible = "st,clkgen-pll1-c0";
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-c0-pll1-odf-0";
};
clk_s_c0_flexgen: clk-s-c0-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih407-c0";
clocks = <&clk_s_c0_pll0 0>,
<&clk_s_c0_pll1 0>,
<&clk_s_c0_quadfs 3>,
<&clk_sysin>;
- clock-output-names = "clk-icn-gpu",
- "clk-fdma",
- "clk-nand",
- "clk-hva",
- "clk-proc-stfe",
- "clk-proc-tp",
- "clk-rx-icn-dmu",
- "clk-rx-icn-hva",
- "clk-icn-cpu",
- "clk-tx-icn-dmu",
- "clk-mmc-0",
- "clk-mmc-1",
- "clk-jpegdec",
- "clk-ext2fa9",
- "clk-ic-bdisp-0",
- "clk-ic-bdisp-1",
- "clk-pp-dmu",
- "clk-vid-dmu",
- "clk-dss-lpc",
- "clk-st231-aud-0",
- "clk-st231-gp-1",
- "clk-st231-dmu",
- "clk-icn-lmi",
- "clk-tx-icn-disp-1",
- "clk-icn-sbc",
- "clk-stfe-frc2",
- "clk-eth-phy",
- "clk-eth-ref-phyclk",
- "clk-flash-promip",
- "clk-main-disp",
- "clk-aux-disp",
- "clk-compo-dvp";
- clock-critical = <CLK_PROC_STFE>,
- <CLK_ICN_CPU>,
- <CLK_TX_ICN_DMU>,
- <CLK_EXT2F_A9>,
- <CLK_ICN_LMI>,
- <CLK_ICN_SBC>;
-
/*
* ARM Peripheral clock for timers
*/
clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
#clock-cells = <1>;
- compatible = "st,quadfs";
+ compatible = "st,quadfs-d0";
reg = <0x9104000 0x1000>;
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-d0-fs0-ch0",
- "clk-s-d0-fs0-ch1",
- "clk-s-d0-fs0-ch2",
- "clk-s-d0-fs0-ch3";
};
clockgen-d0@9104000 {
clk_s_d0_flexgen: clk-s-d0-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen-audio", "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih407-d0";
clocks = <&clk_s_d0_quadfs 0>,
<&clk_s_d0_quadfs 1>,
<&clk_s_d0_quadfs 2>,
<&clk_s_d0_quadfs 3>,
<&clk_sysin>;
-
- clock-output-names = "clk-pcm-0",
- "clk-pcm-1",
- "clk-pcm-2",
- "clk-spdiff";
};
};
clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
#clock-cells = <1>;
- compatible = "st,quadfs";
+ compatible = "st,quadfs-d2";
reg = <0x9106000 0x1000>;
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-d2-fs0-ch0",
- "clk-s-d2-fs0-ch1",
- "clk-s-d2-fs0-ch2",
- "clk-s-d2-fs0-ch3";
};
clockgen-d2@9106000 {
clk_s_d2_flexgen: clk-s-d2-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen-video", "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih407-d2";
clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_sysin>,
<&clk_sysin>,
<&clk_tmdsout_hdmi>;
-
- clock-output-names = "clk-pix-main-disp",
- "clk-pix-pip",
- "clk-pix-gdp1",
- "clk-pix-gdp2",
- "clk-pix-gdp3",
- "clk-pix-gdp4",
- "clk-pix-aux-disp",
- "clk-denc",
- "clk-pix-hddac",
- "clk-hddac",
- "clk-sddac",
- "clk-pix-dvo",
- "clk-dvo",
- "clk-pix-hdmi",
- "clk-tmds-hdmi",
- "clk-ref-hdmiphy";
- };
+ };
};
clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
#clock-cells = <1>;
- compatible = "st,quadfs";
+ compatible = "st,quadfs-d3";
reg = <0x9107000 0x1000>;
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-d3-fs0-ch0",
- "clk-s-d3-fs0-ch1",
- "clk-s-d3-fs0-ch2",
- "clk-s-d3-fs0-ch3";
};
clockgen-d3@9107000 {
clk_s_d3_flexgen: clk-s-d3-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih407-d3";
clocks = <&clk_s_d3_quadfs 0>,
<&clk_s_d3_quadfs 1>,
<&clk_s_d3_quadfs 2>,
<&clk_s_d3_quadfs 3>,
<&clk_sysin>;
-
- clock-output-names = "clk-stfe-frc1",
- "clk-tsout-0",
- "clk-tsout-1",
- "clk-mchi",
- "clk-vsens-compo",
- "clk-frc1-remote",
- "clk-lpc-0",
- "clk-lpc-1";
};
};
};
st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
};
+ spifsm: spifsm@9022000{
+ compatible = "st,spi-fsm";
+ reg = <0x9022000 0x1000>;
+ reg-names = "spi-fsm";
+ clocks = <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+ clock-names = "emi_clk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fsm>;
+ st,syscfg = <&syscfg_core>;
+ st,boot-device-reg = <0x8c4>;
+ st,boot-device-spi = <0x68>;
+
+ status = "disabled";
+ };
+
sata0: sata@9b20000 {
compatible = "st,ahci";
reg = <0x9b20000 0x1000>;
compatible = "st,stih410-b2120", "st,stih410";
chosen {
- bootargs = "clk_ignore_unused";
stdout-path = &sbc_serial0;
};
compatible = "st,stih410-b2260", "st,stih410";
chosen {
- bootargs = "clk_ignore_unused";
stdout-path = &uart1;
};
compatible = "st,stih407-clkgen-plla9";
clocks = <&clk_sysin>;
-
- clock-output-names = "clockgen-a9-pll-odf";
};
};
clk_s_a0_pll: clk-s-a0-pll {
#clock-cells = <1>;
- compatible = "st,clkgen-pll0";
+ compatible = "st,clkgen-pll0-a0";
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-a0-pll-ofd-0";
- clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
};
clk_s_a0_flexgen: clk-s-a0-flexgen {
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih410-a0";
#clock-cells = <1>;
clocks = <&clk_s_a0_pll 0>,
<&clk_sysin>;
-
- clock-output-names = "clk-ic-lmi0",
- "clk-ic-lmi1";
- clock-critical = <CLK_IC_LMI0>;
};
};
reg = <0x9103000 0x1000>;
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-c0-fs0-ch0",
- "clk-s-c0-fs0-ch1",
- "clk-s-c0-fs0-ch2",
- "clk-s-c0-fs0-ch3";
- clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
};
clk_s_c0: clockgen-c@9103000 {
clk_s_c0_pll0: clk-s-c0-pll0 {
#clock-cells = <1>;
- compatible = "st,clkgen-pll0";
+ compatible = "st,clkgen-pll0-c0";
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-c0-pll0-odf-0";
- clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
};
clk_s_c0_pll1: clk-s-c0-pll1 {
#clock-cells = <1>;
- compatible = "st,clkgen-pll1";
+ compatible = "st,clkgen-pll1-c0";
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-c0-pll1-odf-0";
};
clk_s_c0_flexgen: clk-s-c0-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih410-c0";
clocks = <&clk_s_c0_pll0 0>,
<&clk_s_c0_pll1 0>,
<&clk_s_c0_quadfs 3>,
<&clk_sysin>;
- clock-output-names = "clk-icn-gpu",
- "clk-fdma",
- "clk-nand",
- "clk-hva",
- "clk-proc-stfe",
- "clk-proc-tp",
- "clk-rx-icn-dmu",
- "clk-rx-icn-hva",
- "clk-icn-cpu",
- "clk-tx-icn-dmu",
- "clk-mmc-0",
- "clk-mmc-1",
- "clk-jpegdec",
- "clk-ext2fa9",
- "clk-ic-bdisp-0",
- "clk-ic-bdisp-1",
- "clk-pp-dmu",
- "clk-vid-dmu",
- "clk-dss-lpc",
- "clk-st231-aud-0",
- "clk-st231-gp-1",
- "clk-st231-dmu",
- "clk-icn-lmi",
- "clk-tx-icn-disp-1",
- "clk-icn-sbc",
- "clk-stfe-frc2",
- "clk-eth-phy",
- "clk-eth-ref-phyclk",
- "clk-flash-promip",
- "clk-main-disp",
- "clk-aux-disp",
- "clk-compo-dvp",
- "clk-tx-icn-hades",
- "clk-rx-icn-hades",
- "clk-icn-reg-16",
- "clk-pp-hades",
- "clk-clust-hades",
- "clk-hwpe-hades",
- "clk-fc-hades";
- clock-critical = <CLK_PROC_STFE>,
- <CLK_ICN_CPU>,
- <CLK_TX_ICN_DMU>,
- <CLK_EXT2F_A9>,
- <CLK_ICN_LMI>,
- <CLK_ICN_SBC>;
-
/*
* ARM Peripheral clock for timers
*/
clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
#clock-cells = <1>;
- compatible = "st,quadfs";
+ compatible = "st,quadfs-d0";
reg = <0x9104000 0x1000>;
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-d0-fs0-ch0",
- "clk-s-d0-fs0-ch1",
- "clk-s-d0-fs0-ch2",
- "clk-s-d0-fs0-ch3";
};
clockgen-d0@9104000 {
clk_s_d0_flexgen: clk-s-d0-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen-audio", "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih410-d0";
clocks = <&clk_s_d0_quadfs 0>,
<&clk_s_d0_quadfs 1>,
<&clk_s_d0_quadfs 2>,
<&clk_s_d0_quadfs 3>,
<&clk_sysin>;
-
- clock-output-names = "clk-pcm-0",
- "clk-pcm-1",
- "clk-pcm-2",
- "clk-spdiff",
- "clk-pcmr10-master",
- "clk-usb2-phy";
};
};
clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
#clock-cells = <1>;
- compatible = "st,quadfs";
+ compatible = "st,quadfs-d2";
reg = <0x9106000 0x1000>;
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-d2-fs0-ch0",
- "clk-s-d2-fs0-ch1",
- "clk-s-d2-fs0-ch2",
- "clk-s-d2-fs0-ch3";
};
clockgen-d2@9106000 {
clk_s_d2_flexgen: clk-s-d2-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen-video", "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih407-d2";
clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_sysin>,
<&clk_sysin>,
<&clk_tmdsout_hdmi>;
-
- clock-output-names = "clk-pix-main-disp",
- "clk-pix-pip",
- "clk-pix-gdp1",
- "clk-pix-gdp2",
- "clk-pix-gdp3",
- "clk-pix-gdp4",
- "clk-pix-aux-disp",
- "clk-denc",
- "clk-pix-hddac",
- "clk-hddac",
- "clk-sddac",
- "clk-pix-dvo",
- "clk-dvo",
- "clk-pix-hdmi",
- "clk-tmds-hdmi",
- "clk-ref-hdmiphy";
- };
+ };
};
clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
#clock-cells = <1>;
- compatible = "st,quadfs";
+ compatible = "st,quadfs-d3";
reg = <0x9107000 0x1000>;
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-d3-fs0-ch0",
- "clk-s-d3-fs0-ch1",
- "clk-s-d3-fs0-ch2",
- "clk-s-d3-fs0-ch3";
};
clockgen-d3@9107000 {
clk_s_d3_flexgen: clk-s-d3-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih407-d3";
clocks = <&clk_s_d3_quadfs 0>,
<&clk_s_d3_quadfs 1>,
<&clk_s_d3_quadfs 2>,
<&clk_s_d3_quadfs 3>,
<&clk_sysin>;
-
- clock-output-names = "clk-stfe-frc1",
- "clk-tsout-0",
- "clk-tsout-1",
- "clk-mchi",
- "clk-vsens-compo",
- "clk-frc1-remote",
- "clk-lpc-0",
- "clk-lpc-1";
};
};
};
compatible = "st,stih418-b2199", "st,stih418";
chosen {
- bootargs = "clk_ignore_unused";
stdout-path = &sbc_serial0;
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 STMicroelectronics
+ * Author: Alain Volmat <avolmat@me.com>
+ */
+/dts-v1/;
+#include "stih418.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
+ model = "STiH418 B2264";
+ compatible = "st,stih418-b2264", "st,stih418";
+
+ chosen {
+ stdout-path = &sbc_serial0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0xc0000000>;
+ };
+
+ cpus {
+ cpu@0 {
+ operating-points-v2 = <&cpu_opp_table>;
+ /* u-boot puts hpen in SBC dmem at 0xb8 offset */
+ cpu-release-addr = <0x94100b8>;
+ };
+ cpu@1 {
+ operating-points-v2 = <&cpu_opp_table>;
+ /* u-boot puts hpen in SBC dmem at 0xb8 offset */
+ cpu-release-addr = <0x94100b8>;
+ };
+ cpu@2 {
+ operating-points-v2 = <&cpu_opp_table>;
+ /* u-boot puts hpen in SBC dmem at 0xb8 offset */
+ cpu-release-addr = <0x94100b8>;
+ };
+ cpu@3 {
+ operating-points-v2 = <&cpu_opp_table>;
+ /* u-boot puts hpen in SBC dmem at 0xb8 offset */
+ cpu-release-addr = <0x94100b8>;
+ };
+ };
+
+ cpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <784000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <784000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <784000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <784000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <784000>;
+ };
+ };
+
+ aliases {
+ ttyAS0 = &sbc_serial0;
+ ethernet0 = ðernet0;
+ };
+
+ soc {
+ leds {
+ compatible = "gpio-leds";
+ green {
+ gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ pin-controller-sbc@961f080 {
+ gmac1 {
+ rgmii1-0 {
+ st,pins {
+ rxd0 = <&pio1 4 ALT1 IN DE_IO 300 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN DE_IO 300 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN DE_IO 300 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN DE_IO 300 CLK_A>;
+ rxdv = <&pio2 0 ALT1 IN DE_IO 300 CLK_A>;
+ };
+ };
+ };
+ };
+
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+ðernet0 {
+ phy-mode = "rgmii";
+ pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
+ st,tx-retime-src = "clkgen";
+
+ snps,reset-gpio = <&pio0 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+
+ status = "okay";
+};
+
+&miphy28lp_phy {
+ phy_port0: port@9b22000 {
+ st,sata-gen = <2>; /* SATA GEN3 */
+ st,osc-rdy;
+ };
+};
+
+&mmc0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sbc_serial0 {
+ status = "okay";
+};
+
+&spifsm {
+ status = "okay";
+};
+
+&st_dwc3 {
+ status = "okay";
+};
compatible = "st,stih418-clkgen-plla9";
clocks = <&clk_sysin>;
-
- clock-output-names = "clockgen-a9-pll-odf";
};
};
clk_s_a0_pll: clk-s-a0-pll {
#clock-cells = <1>;
- compatible = "st,clkgen-pll0";
+ compatible = "st,clkgen-pll0-a0";
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-a0-pll-ofd-0";
};
clk_s_a0_flexgen: clk-s-a0-flexgen {
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih410-a0";
#clock-cells = <1>;
clocks = <&clk_s_a0_pll 0>,
<&clk_sysin>;
-
- clock-output-names = "clk-ic-lmi0",
- "clk-ic-lmi1";
};
};
reg = <0x9103000 0x1000>;
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-c0-fs0-ch0",
- "clk-s-c0-fs0-ch1",
- "clk-s-c0-fs0-ch2",
- "clk-s-c0-fs0-ch3";
};
clk_s_c0: clockgen-c@9103000 {
clk_s_c0_pll0: clk-s-c0-pll0 {
#clock-cells = <1>;
- compatible = "st,clkgen-pll0";
+ compatible = "st,clkgen-pll0-c0";
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-c0-pll0-odf-0";
};
clk_s_c0_pll1: clk-s-c0-pll1 {
#clock-cells = <1>;
- compatible = "st,clkgen-pll1";
+ compatible = "st,clkgen-pll1-c0";
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-c0-pll1-odf-0";
};
clk_s_c0_flexgen: clk-s-c0-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih418-c0";
clocks = <&clk_s_c0_pll0 0>,
<&clk_s_c0_pll1 0>,
<&clk_s_c0_quadfs 3>,
<&clk_sysin>;
- clock-output-names = "clk-icn-gpu",
- "clk-fdma",
- "clk-nand",
- "clk-hva",
- "clk-proc-stfe",
- "clk-tp",
- "clk-rx-icn-dmu",
- "clk-rx-icn-hva",
- "clk-icn-cpu",
- "clk-tx-icn-dmu",
- "clk-mmc-0",
- "clk-mmc-1",
- "clk-jpegdec",
- "clk-icn-reg",
- "clk-proc-bdisp-0",
- "clk-proc-bdisp-1",
- "clk-pp-dmu",
- "clk-vid-dmu",
- "clk-dss-lpc",
- "clk-st231-aud-0",
- "clk-st231-gp-1",
- "clk-st231-dmu",
- "clk-icn-lmi",
- "clk-tx-icn-1",
- "clk-icn-sbc",
- "clk-stfe-frc2",
- "clk-eth-phyref",
- "clk-eth-ref-phyclk",
- "clk-flash-promip",
- "clk-main-disp",
- "clk-aux-disp",
- "clk-compo-dvp",
- "clk-tx-icn-hades",
- "clk-rx-icn-hades",
- "clk-icn-reg-16",
- "clk-pp-hevc",
- "clk-clust-hevc",
- "clk-hwpe-hevc",
- "clk-fc-hevc",
- "clk-proc-mixer",
- "clk-proc-sc",
- "clk-avsp-hevc";
-
/*
* ARM Peripheral clock for timers
*/
clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
#clock-cells = <1>;
- compatible = "st,quadfs";
+ compatible = "st,quadfs-d0";
reg = <0x9104000 0x1000>;
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-d0-fs0-ch0",
- "clk-s-d0-fs0-ch1",
- "clk-s-d0-fs0-ch2",
- "clk-s-d0-fs0-ch3";
};
clockgen-d0@9104000 {
clk_s_d0_flexgen: clk-s-d0-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen-audio", "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih410-d0";
clocks = <&clk_s_d0_quadfs 0>,
<&clk_s_d0_quadfs 1>,
<&clk_s_d0_quadfs 2>,
<&clk_s_d0_quadfs 3>,
<&clk_sysin>;
-
- clock-output-names = "clk-pcm-0",
- "clk-pcm-1",
- "clk-pcm-2",
- "clk-spdiff",
- "clk-pcmr10-master",
- "clk-usb2-phy";
};
};
clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
#clock-cells = <1>;
- compatible = "st,quadfs";
+ compatible = "st,quadfs-d2";
reg = <0x9106000 0x1000>;
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-d2-fs0-ch0",
- "clk-s-d2-fs0-ch1",
- "clk-s-d2-fs0-ch2",
- "clk-s-d2-fs0-ch3";
};
clockgen-d2@9106000 {
clk_s_d2_flexgen: clk-s-d2-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen-video", "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih418-d2";
clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_sysin>,
<&clk_sysin>,
<&clk_tmdsout_hdmi>;
-
- clock-output-names = "clk-pix-main-disp",
- "",
- "",
- "",
- "",
- "clk-tmds-hdmi-div2",
- "clk-pix-aux-disp",
- "clk-denc",
- "clk-pix-hddac",
- "clk-hddac",
- "clk-sddac",
- "clk-pix-dvo",
- "clk-dvo",
- "clk-pix-hdmi",
- "clk-tmds-hdmi",
- "clk-ref-hdmiphy",
- "", "", "", "", "",
- "", "", "", "", "",
- "", "", "", "", "",
- "", "", "", "", "",
- "", "", "", "", "",
- "", "", "", "", "",
- "", "clk-vp9";
};
};
clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
#clock-cells = <1>;
- compatible = "st,quadfs";
+ compatible = "st,quadfs-d3";
reg = <0x9107000 0x1000>;
clocks = <&clk_sysin>;
-
- clock-output-names = "clk-s-d3-fs0-ch0",
- "clk-s-d3-fs0-ch1",
- "clk-s-d3-fs0-ch2",
- "clk-s-d3-fs0-ch3";
};
clockgen-d3@9107000 {
clk_s_d3_flexgen: clk-s-d3-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih407-d3";
clocks = <&clk_s_d3_quadfs 0>,
<&clk_s_d3_quadfs 1>,
<&clk_s_d3_quadfs 2>,
<&clk_s_d3_quadfs 3>,
<&clk_sysin>;
-
- clock-output-names = "clk-stfe-frc1",
- "clk-tsout-0",
- "clk-tsout-1",
- "clk-mchi",
- "clk-vsens-compo",
- "clk-frc1-remote",
- "clk-lpc-0",
- "clk-lpc-1";
};
};
};
};
soc {
+ rng11: rng@8a8a000 {
+ status = "disabled";
+ };
+
usb2_picophy1: phy2@0 {
compatible = "st,stih407-usb2-phy";
reg = <0 0>;
assigned-clock-parents = <&clk_s_c0_pll1 0>;
assigned-clock-rates = <200000000>;
};
+
+ thermal@91a0000 {
+ compatible = "st,stih407-thermal";
+ reg = <0x91a0000 0x28>;
+ clock-names = "thermal";
+ clocks = <&clk_sysin>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+ };
};
};
stdout-path = "serial0:115200n8";
};
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x2000000>;
};
stdout-path = "serial0:115200n8";
};
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x1000000>;
};
&m4_rproc {
memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
<&vdev0vring1>, <&vdev0buffer>;
- mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
- mbox-names = "vq0", "vq1", "shutdown";
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+ mbox-names = "vq0", "vq1", "shutdown", "detach";
interrupt-parent = <&exti>;
interrupts = <68 1>;
status = "okay";
&usbphyc_port0 {
phy-supply = <&vdd_usb>;
};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};
brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
default-brightness-level = <8>;
enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
+ power-supply = <®_panel_bl>;
status = "okay";
};
panel {
compatible = "edt,etm0700g0edh6";
backlight = <&display_bl>;
+ power-supply = <®_panel_bl>;
port {
lcd_panel_in: endpoint {
};
};
+ reg_panel_bl: regulator-panel-bl {
+ compatible = "regulator-fixed";
+ regulator-name = "panel_backlight";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_panel_supply>;
+ };
+
+ reg_panel_supply: regulator-panel-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "panel_supply";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ };
+
sound {
compatible = "audio-graph-card";
routing =
sgtl5000_tx_endpoint: endpoint@0 {
reg = <0>;
remote-endpoint = <&sai2a_endpoint>;
- frame-master;
- bitclock-master;
+ frame-master = <&sgtl5000_tx_endpoint>;
+ bitclock-master = <&sgtl5000_tx_endpoint>;
};
sgtl5000_rx_endpoint: endpoint@1 {
reg = <1>;
remote-endpoint = <&sai2b_endpoint>;
- frame-master;
- bitclock-master;
+ frame-master = <&sgtl5000_rx_endpoint>;
+ bitclock-master = <&sgtl5000_rx_endpoint>;
};
};
&i2c4 {
hdmi-transmitter@3d {
compatible = "adi,adv7513";
- reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;
- reg-names = "main", "cec", "edid", "packet";
+ reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
+ reg-names = "main", "edid", "cec", "packet";
clocks = <&cec_clock>;
clock-names = "cec";
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
ports {
#address-cells = <1>;
cs42l51_tx_endpoint: endpoint@0 {
reg = <0>;
remote-endpoint = <&sai2a_endpoint>;
- frame-master;
- bitclock-master;
+ frame-master = <&cs42l51_tx_endpoint>;
+ bitclock-master = <&cs42l51_tx_endpoint>;
};
cs42l51_rx_endpoint: endpoint@1 {
reg = <1>;
remote-endpoint = <&sai2b_endpoint>;
- frame-master;
- bitclock-master;
+ frame-master = <&cs42l51_rx_endpoint>;
+ bitclock-master = <&cs42l51_rx_endpoint>;
};
};
};
&m4_rproc {
memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
<&vdev0vring1>, <&vdev0buffer>;
- mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
- mbox-names = "vq0", "vq1", "shutdown";
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+ mbox-names = "vq0", "vq1", "shutdown", "detach";
interrupt-parent = <&exti>;
interrupts = <68 1>;
status = "okay";
reg = <0x4c>;
vcc-supply = <&palmas_ldo6_reg>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_EDGE_FALLING>;
};
};
compatible = "ti,tmp451";
reg = <0x4c>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
#thermal-sensor-cells = <1>;
vcc-supply = <®_module_3v3>;
};
compatible = "ti,tmp451";
reg = <0x4c>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
#thermal-sensor-cells = <1>;
vcc-supply = <®_module_3v3>;
};
compatible = "ti,tmp451";
reg = <0x4c>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
};
eeprom@56 {
compatible = "ti,tmp451";
reg = <0x4c>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
#thermal-sensor-cells = <1>;
};
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/input/atmel-maxtouch.h>
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/thermal/thermal.h>
vdda-supply = <&vdd_3v3_sys>;
vdd-supply = <&vdd_3v3_sys>;
- atmel,wakeup-method = <1>;
+ atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
};
gyroscope@68 {
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <&vdd_1v8_sys>;
+ vddio-supply = <&vdd_1v8_sys>;
+
mount-matrix = "0", "1", "0",
"1", "0", "0",
"0", "0", "-1";
compatible = "onnn,nct1008";
reg = <0x4c>;
vcc-supply = <&vdd_3v3_sys>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
#thermal-sensor-cells = <1>;
};
};
nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
- vbus-supply = <&vdd_vbus1>;
};
usb@c5008000 {
nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
- vbus-supply = <&vdd_vbus3>;
+ vbus-supply = <&vdd_5v0_sys>;
};
brcm_wifi_pwrseq: wifi-pwrseq {
vin-supply = <&vdd_5v0_sys>;
};
- vdd_vbus1: regulator@4 {
- compatible = "regulator-fixed";
- regulator-name = "vdd_usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
-
- vdd_vbus3: regulator@5 {
- compatible = "regulator-fixed";
- regulator-name = "vdd_usb3_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- gpio = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
-
sound {
compatible = "nvidia,tegra-audio-wm8903-picasso",
"nvidia,tegra-audio-wm8903";
};
thermal-zones {
+ /*
+ * NCT1008 has two sensors:
+ *
+ * 0: internal that monitors ambient/skin temperature
+ * 1: external that is connected to the CPU's diode
+ *
+ * Ideally we should use userspace thermal governor,
+ * but it's a much more complex solution. The "skin"
+ * zone is a simpler solution which prevents A500 from
+ * getting too hot from a user's tactile perspective.
+ * The CPU zone is intended to protect silicon from damage.
+ */
+
skin-thermal {
polling-delay-passive = <1000>; /* milliseconds */
- polling-delay = <0>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
thermal-sensors = <&nct1008 0>;
+
+ trips {
+ trip0: skin-alert {
+ /* start throttling at 60C */
+ temperature = <60000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+
+ trip1: skin-crit {
+ /* shut down at 70C */
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&trip0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal {
thermal-sensors = <&nct1008 1>;
trips {
- trip0: cpu-alert0 {
- /* start throttling at 60C */
- temperature = <60000>;
+ trip2: cpu-alert {
+ /* throttle at 85C until temperature drops to 84.8C */
+ temperature = <85000>;
hysteresis = <200>;
type = "passive";
};
- trip1: cpu-crit {
- /* shut down at 70C */
- temperature = <70000>;
+ trip3: cpu-crit {
+ /* shut down at 90C */
+ temperature = <90000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
- map0 {
- trip = <&trip0>;
+ map1 {
+ trip = <&trip2>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
adt7461: temperature-sensor@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
#thermal-sensor-cells = <1>;
};
};
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
"cdev1", "cdev2", "dap1", "dtb", "gma",
"gmb", "gmc", "gmd", "gme", "gpu7",
- "gpv", "i2cp", "pta", "rm", "slxa",
- "slxk", "spia", "spib", "uac";
+ "gpv", "i2cp", "irrx", "irtx", "pta",
+ "rm", "slxa", "slxk", "spia", "spib",
+ "uac";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ddc {
nvidia,pins = "ddc", "dta", "dtd", "kbca",
"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
- "sdc";
+ "sdc", "uad", "uca";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
"lvp0", "owc", "sdb";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- conf_irrx {
- nvidia,pins = "irrx", "irtx", "sdd", "spic",
- "spie", "spih", "uaa", "uab", "uad",
- "uca", "ucb";
+ conf_sdd {
+ nvidia,pins = "sdd", "spic", "spie", "spih",
+ "uaa", "uab", "ucb";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
compatible = "onnn,nct1008";
reg = <0x4c>;
vcc-supply = <&vdd_3v3_sys>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(S, 3) IRQ_TYPE_EDGE_FALLING>;
+
#thermal-sensor-cells = <1>;
};
};
thermal-zones {
- cpu-thermal {
+ /*
+ * NCT72 has two sensors:
+ *
+ * 0: internal that monitors ambient/skin temperature
+ * 1: external that is connected to the CPU's diode
+ *
+ * Ideally we should use userspace thermal governor,
+ * but it's a much more complex solution. The "skin"
+ * zone is a simpler solution which prevents Nexus 7
+ * from getting too hot from a user's tactile perspective.
+ * The CPU zone is intended to protect silicon from damage.
+ */
+
+ skin-thermal {
polling-delay-passive = <1000>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
- thermal-sensors = <&nct72 1>;
+ thermal-sensors = <&nct72 0>;
trips {
- trip0: cpu-alert0 {
+ trip0: skin-alert {
/* throttle at 57C until temperature drops to 56.8C */
temperature = <57000>;
hysteresis = <200>;
type = "passive";
};
- trip1: cpu-crit {
+ trip1: skin-crit {
/* shut down at 65C */
temperature = <65000>;
hysteresis = <2000>;
};
};
};
+
+ cpu-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&nct72 1>;
+
+ trips {
+ trip2: cpu-alert {
+ /* throttle at 85C until temperature drops to 84.8C */
+ temperature = <85000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+
+ trip3: cpu-crit {
+ /* shut down at 90C */
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&trip2>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&actmon THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
};
};
reg = <0x4c>;
vcc-supply = <&sys_3v3_reg>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
#thermal-sensor-cells = <1>;
};
compatible = "onnn,nct1008";
reg = <0x4c>;
vcc-supply = <&sys_3v3_reg>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
#thermal-sensor-cells = <1>;
-/*
- * The interrupt is bugged, once triggered it never clears.
- * interrupt-parent = <&gpio>;
- * interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
- */
};
pmic: pmic@2d {
nvidia,pins = "pcc2";
nvidia,function = "i2s4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc4_rst_n_pcc3 {
nvidia,pins = "sdmmc4_rst_n_pcc3";
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/tegra-pmc.h>
+#include <dt-bindings/thermal/thermal.h>
#include "tegra30-peripherals-opp.dtsi"
reset-names = "fuse";
};
+ tsensor: tsensor@70014000 {
+ compatible = "nvidia,tegra30-tsensor";
+ reg = <0x70014000 0x500>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_TSENSOR>;
+ resets = <&tegra_car TEGRA30_CLK_TSENSOR>;
+
+ assigned-clocks = <&tegra_car TEGRA30_CLK_TSENSOR>;
+ assigned-clock-parents = <&tegra_car TEGRA30_CLK_CLK_M>;
+ assigned-clock-rates = <500000>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
hda@70030000 {
compatible = "nvidia,tegra30-hda";
reg = <0x70030000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+ #cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+ #cooling-cells = <2>;
};
- cpu@2 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+ #cooling-cells = <2>;
};
- cpu@3 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+ #cooling-cells = <2>;
};
};
<&{/cpus/cpu@2}>,
<&{/cpus/cpu@3}>;
};
+
+ thermal-zones {
+ tsensor0-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&tsensor 0>;
+
+ trips {
+ level1_trip: dvfs-alert {
+ /* throttle at 80C until temperature drops to 79.8C */
+ temperature = <80000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+
+ level2_trip: cpu-div2-throttle {
+ /* hardware CPU x2 freq throttle at 85C */
+ temperature = <85000>;
+ hysteresis = <200>;
+ type = "hot";
+ };
+
+ level3_trip: soc-critical {
+ /* hardware shut down at 90C */
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&level1_trip>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&actmon THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ tsensor1-thermal {
+ status = "disabled";
+
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <0>; /* milliseconds */
+
+ thermal-sensors = <&tsensor 1>;
+
+ trips {
+ dvfs-alert {
+ temperature = <80000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+ };
+ };
+ };
};
compatible = "atmel,at93c46d";
pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>;
pinctrl-names = "default";
- #address-cells = <0>;
- #size-cells = <0>;
reg = <1>;
spi-max-frequency = <500000>;
spi-cs-high;
#size-cells = <0>;
};
+ smcc: memory-controller@e000e000 {
+ compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+ reg = <0xe000e000 0x0001000>;
+ status = "disabled";
+ clock-names = "memclk", "apb_pclk";
+ clocks = <&clkc 11>, <&clkc 44>;
+ ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+ 0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+ 0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ nfc0: nand-controller@0,0 {
+ compatible = "arm,pl353-nand-r2p1";
+ reg = <0 0 0x1000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
sdhci0: mmc@e0100000 {
compatible = "arasan,sdhci-8.9a";
status = "disabled";
pinctrl-0 = <&pinctrl_gpio0_default>;
};
+&nfc0 {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ };
+};
+
&pinctrl0 {
pinctrl_gpio0_default: gpio0-default {
mux {
};
};
+&smcc {
+ status = "okay";
+};
+
&sdhci0 {
status = "okay";
disable-wp;
};
};
- reg_vcc3v3: vcc3v3 {
+ reg_vcc1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_vcc3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- reg_vdd_cpu_gpu: vdd-cpu-gpu {
+ reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
compatible = "regulator-fixed";
regulator-name = "vdd-cpu-gpu";
regulator-min-microvolt = <1135000>;
status = "okay";
};
+&mmc2 {
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc1v8>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
&ohci0 {
status = "okay";
};
status = "okay";
};
+&pio {
+ vcc-pc-supply = <®_vcc1v8>;
+ vcc-pd-supply = <®_vcc3v3>;
+ vcc-pg-supply = <®_vcc1v8>;
+};
+
&r_ir {
linux,rc-map-name = "rc-tanix-tx5max";
status = "okay";
/* Bluetooth on AP6212 */
&uart_A {
- status = "disabled";
+ status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&wifi_32k>;
+ clock-names = "lpo";
+ vbat-supply = <&vddio_ao3v3>;
+ vddio-supply = <&vddio_ao18>;
+ host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+ };
};
/* 40-pin CON1 */
*/
#include "meson-gxbb.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
/ {
compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb";
stdout-path = "serial0:115200n8";
};
+ spdif_dit: audio-codec-0 {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ status = "okay";
+ sound-name-prefix = "DIT";
+ };
+
leds {
compatible = "gpio-leds";
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ sound {
+ compatible = "amlogic,gx-sound-card";
+ model = "VEGA-S95";
+ assigned-clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+ dai-format = "i2s";
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+ };
+ };
+
+ dai-link-3 {
+ sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+ codec-0 {
+ sound-dai = <&spdif_dit>;
+ };
+ };
+
+ dai-link-4 {
+ sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+ codec-0 {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&aiu {
+ status = "okay";
+ pinctrl-0 = <&spdif_out_y_pins>;
+ pinctrl-names = "default";
};
&cec_AO {
};
&sd_emmc_a {
+ max-frequency = <100000000>;
+
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
#size-cells = <0>;
bus-width = <4>;
- max-frequency = <60000000>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
non-removable;
disable-wp;
/dts-v1/;
#include "meson-gxm.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
/ {
compatible = "nexbox,a1", "amlogic,s912", "amlogic,meson-gxm";
stdout-path = "serial0:115200n8";
};
+ spdif_dit: audio-codec-0 {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ status = "okay";
+ sound-name-prefix = "DIT";
+ };
+
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
};
};
+
+ sound {
+ compatible = "amlogic,gx-sound-card";
+ model = "NEXBOX-A1";
+ assigned-clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+ dai-format = "i2s";
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+ };
+ };
+
+ dai-link-3 {
+ sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+ codec-0 {
+ sound-dai = <&spdif_dit>;
+ };
+ };
+
+ dai-link-4 {
+ sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+ codec-0 {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&aiu {
+ status = "okay";
+ pinctrl-0 = <&spdif_out_h_pins>;
+ pinctrl-names = "default";
};
&cec_AO {
#address-cells = <1>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
cpu0: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53";
clock-names = "apolloclk";
operating-points-v2 = <&cluster_a53_opp_table>;
#cooling-cells = <2>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&cluster_a53_l2>;
};
cpu1: cpu@101 {
clock-frequency = <1300000000>;
operating-points-v2 = <&cluster_a53_opp_table>;
#cooling-cells = <2>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&cluster_a53_l2>;
};
cpu2: cpu@102 {
clock-frequency = <1300000000>;
operating-points-v2 = <&cluster_a53_opp_table>;
#cooling-cells = <2>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&cluster_a53_l2>;
};
cpu3: cpu@103 {
clock-frequency = <1300000000>;
operating-points-v2 = <&cluster_a53_opp_table>;
#cooling-cells = <2>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&cluster_a53_l2>;
};
cpu4: cpu@0 {
clock-names = "atlasclk";
operating-points-v2 = <&cluster_a57_opp_table>;
#cooling-cells = <2>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cluster_a57_l2>;
};
cpu5: cpu@1 {
clock-frequency = <1900000000>;
operating-points-v2 = <&cluster_a57_opp_table>;
#cooling-cells = <2>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cluster_a57_l2>;
};
cpu6: cpu@2 {
clock-frequency = <1900000000>;
operating-points-v2 = <&cluster_a57_opp_table>;
#cooling-cells = <2>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cluster_a57_l2>;
};
cpu7: cpu@3 {
clock-frequency = <1900000000>;
operating-points-v2 = <&cluster_a57_opp_table>;
#cooling-cells = <2>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&cluster_a57_l2>;
+ };
+
+ cluster_a57_l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x200000>;
+ cache-line-size = <64>;
+ cache-sets = <2048>;
+ };
+
+ cluster_a53_l2: l2-cache1 {
+ compatible = "cache";
+ cache-size = <0x40000>;
+ cache-line-size = <64>;
+ cache-sets = <256>;
};
};
compatible = "arm,cortex-a57";
reg = <0x0>;
enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&atlas_l2>;
};
cpu_atlas1: cpu@1 {
compatible = "arm,cortex-a57";
reg = <0x1>;
enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&atlas_l2>;
};
cpu_atlas2: cpu@2 {
compatible = "arm,cortex-a57";
reg = <0x2>;
enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&atlas_l2>;
};
cpu_atlas3: cpu@3 {
compatible = "arm,cortex-a57";
reg = <0x3>;
enable-method = "psci";
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&atlas_l2>;
+ };
+
+ atlas_l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x200000>;
+ cache-line-size = <64>;
+ cache-sets = <2048>;
};
};
#address-cells = <0>;
interrupt-controller;
reg = <0x11001000 0x1000>,
- <0x11002000 0x1000>,
+ <0x11002000 0x2000>,
<0x11004000 0x2000>,
<0x11006000 0x2000>;
};
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r4.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-mnt-reform2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
};
eeprom@52 {
- compatible = "atmel,24c512";
+ compatible = "onnn,cat24c04", "atmel,24c04";
reg = <0x52>;
};
-
- eeprom@53 {
- compatible = "atmel,24c512";
- reg = <0x53>;
- };
-
};
};
};
};
eeprom@52 {
- compatible = "atmel,24c512";
+ compatible = "onnn,cat24c05", "atmel,24c04";
reg = <0x52>;
};
-
- eeprom@53 {
- compatible = "atmel,24c512";
- reg = <0x53>;
- };
};
&i2c3 {
status = "okay";
mdio1_phy5: ethernet-phy@c {
+ interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
reg = <0xc>;
};
mdio1_phy6: ethernet-phy@d {
+ interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
reg = <0xd>;
};
mdio1_phy7: ethernet-phy@e {
+ interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
reg = <0xe>;
};
mdio1_phy8: ethernet-phy@f {
+ interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
reg = <0xf>;
};
mdio1_phy1: ethernet-phy@1c {
+ interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
reg = <0x1c>;
};
mdio1_phy2: ethernet-phy@1d {
+ interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
reg = <0x1d>;
};
mdio1_phy3: ethernet-phy@1e {
+ interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
reg = <0x1e>;
};
mdio1_phy4: ethernet-phy@1f {
+ interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
reg = <0x1f>;
};
};
mdio2_aquantia_phy: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
reg = <0x0>;
};
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Travese Ten64 (LS1088) board
+ * Based on fsl-ls1088a-rdb.dts
+ * Copyright 2017-2020 NXP
+ * Copyright 2019-2021 Traverse Technologies
+ *
+ * Author: Mathew McBride <matt@traverse.com.au>
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Traverse Ten64";
+ compatible = "traverse,ten64", "fsl,ls1088a";
+
+ aliases {
+ serial0 = &duart0;
+ serial1 = &duart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ buttons {
+ compatible = "gpio-keys";
+
+ /* Fired by system controller when
+ * external power off (e.g ATX Power Button)
+ * asserted
+ */
+ powerdn {
+ label = "External Power Down";
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ interrupts = <&gpio1 17 IRQ_TYPE_EDGE_FALLING>;
+ linux,code = <KEY_POWER>;
+ };
+
+ /* Rear Panel 'ADMIN' button (GPIO_H) */
+ admin {
+ label = "ADMIN button";
+ gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+ interrupts = <&gpio3 8 IRQ_TYPE_EDGE_RISING>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sfp1down {
+ label = "ten64:green:sfp1:down";
+ gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp2up {
+ label = "ten64:green:sfp2:up";
+ gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ admin {
+ label = "ten64:admin";
+ gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sfp_xg0: dpmac2-sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfplower_i2c>;
+ tx-fault-gpios = <&sfpgpio 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&sfpgpio 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sfpgpio 2 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sfpgpio 3 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <2000>;
+ };
+
+ sfp_xg1: dpmac1-sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfpupper_i2c>;
+ tx-fault-gpios = <&sfpgpio 4 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&sfpgpio 5 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sfpgpio 6 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <2000>;
+ };
+};
+
+/* XG1 - Upper SFP */
+&dpmac1 {
+ sfp = <&sfp_xg1>;
+ pcs-handle = <&pcs1>;
+ phy-connection-type = "10gbase-r";
+ managed = "in-band-status";
+};
+
+/* XG0 - Lower SFP */
+&dpmac2 {
+ sfp = <&sfp_xg0>;
+ pcs-handle = <&pcs2>;
+ phy-connection-type = "10gbase-r";
+ managed = "in-band-status";
+};
+
+/* DPMAC3..6 is GE4 to GE8 */
+&dpmac3 {
+ phy-handle = <&mdio1_phy5>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs3_0>;
+};
+
+&dpmac4 {
+ phy-handle = <&mdio1_phy6>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs3_1>;
+};
+
+&dpmac5 {
+ phy-handle = <&mdio1_phy7>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs3_2>;
+};
+
+&dpmac6 {
+ phy-handle = <&mdio1_phy8>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs3_3>;
+};
+
+/* DPMAC7..10 is GE0 to GE3 */
+&dpmac7 {
+ phy-handle = <&mdio1_phy1>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs7_0>;
+};
+
+&dpmac8 {
+ phy-handle = <&mdio1_phy2>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs7_1>;
+};
+
+&dpmac9 {
+ phy-handle = <&mdio1_phy3>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs7_2>;
+};
+
+&dpmac10 {
+ phy-handle = <&mdio1_phy4>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs7_3>;
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&emdio1 {
+ status = "okay";
+
+ mdio1_phy5: ethernet-phy@c {
+ reg = <0xc>;
+ };
+
+ mdio1_phy6: ethernet-phy@d {
+ reg = <0xd>;
+ };
+
+ mdio1_phy7: ethernet-phy@e {
+ reg = <0xe>;
+ };
+
+ mdio1_phy8: ethernet-phy@f {
+ reg = <0xf>;
+ };
+
+ mdio1_phy1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ mdio1_phy2: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ mdio1_phy3: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ mdio1_phy4: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+};
+
+&esdhc {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ sfpgpio: gpio@76 {
+ compatible = "ti,tca9539";
+ reg = <0x76>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ admin_led_lower {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+ };
+
+ at97sc: tpm@29 {
+ compatible = "atmel,at97sc3204t";
+ reg = <0x29>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ rx8035: rtc@32 {
+ compatible = "epson,rx8035";
+ reg = <0x32>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9540";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ sfpupper_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ sfplower_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+};
+
+&pcs_mdio1 {
+ status = "okay";
+};
+
+&pcs_mdio2 {
+ status = "okay";
+};
+
+&pcs_mdio3 {
+ status = "okay";
+};
+
+&pcs_mdio7 {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ en25s64: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bl2";
+ reg = <0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "bl3";
+ reg = <0x100000 0x200000>;
+ };
+
+ partition@300000 {
+ label = "mcfirmware";
+ reg = <0x300000 0x200000>;
+ };
+
+ partition@500000 {
+ label = "ubootenv";
+ reg = <0x500000 0x80000>;
+ };
+
+ partition@580000 {
+ label = "dpl";
+ reg = <0x580000 0x40000>;
+ };
+
+ partition@5C0000 {
+ label = "dpc";
+ reg = <0x5C0000 0x40000>;
+ };
+
+ partition@600000 {
+ label = "devicetree";
+ reg = <0x600000 0x40000>;
+ };
+ };
+ };
+
+ nand: flash@1 {
+ compatible = "spi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <1>;
+ spi-max-frequency = <20000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* reserved for future boot direct from NAND flash
+ * (this would use the same layout as the 8MiB NOR flash)
+ */
+ partition@0 {
+ label = "nand-boot-reserved";
+ reg = <0 0x800000>;
+ };
+
+ /* recovery / install environment */
+ partition@800000 {
+ label = "recovery";
+ reg = <0x800000 0x2000000>;
+ };
+
+ /* ubia (first OpenWrt) - a/b names to prevent confusion with ubi0/1/etc. */
+ partition@2800000 {
+ label = "ubia";
+ reg = <0x2800000 0x6C00000>;
+ };
+
+ /* ubib (second OpenWrt) */
+ partition@9400000 {
+ label = "ubib";
+ reg = <0x9400000 0x6C00000>;
+ };
+ };
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
<1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
};
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
status = "disabled";
};
+ pcs_mdio1: mdio@8c07000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c07000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs1: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
pcs_mdio2: mdio@8c0b000 {
compatible = "fsl,fman-memac-mdio";
reg = <0x0 0x8c0b000 0x0 0x1000>;
mdio2_phy1: ethernet-phy@0 {
compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+ interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
reg = <0x0>;
};
mdio2_phy2: ethernet-phy@1 {
compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+ interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
reg = <0x1>;
};
mdio2_phy3: ethernet-phy@2 {
compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+ interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
reg = <0x2>;
};
mdio2_phy4: ethernet-phy@3 {
compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+ interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
reg = <0x3>;
};
};
rgmii_phy1: ethernet-phy@1 {
/* AR8035 PHY */
compatible = "ethernet-phy-id004d.d072";
+ interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
reg = <0x1>;
eee-broken-1000t;
};
rgmii_phy2: ethernet-phy@2 {
/* AR8035 PHY */
compatible = "ethernet-phy-id004d.d072";
+ interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
reg = <0x2>;
eee-broken-1000t;
};
aquantia_phy1: ethernet-phy@4 {
/* AQR107 PHY */
compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
reg = <0x4>;
};
aquantia_phy2: ethernet-phy@5 {
/* AQR107 PHY */
compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>;
reg = <0x5>;
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ * Zhou Guoniu <guoniu.zhou@nxp.com>
+ */
+img_subsys: bus@58000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x58000000 0x0 0x58000000 0x1000000>;
+
+ img_ipg_clk: clock-img-ipg {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ clock-output-names = "img_ipg_clk";
+ };
+
+ jpegdec: jpegdec@58400000 {
+ reg = <0x58400000 0x00050000>;
+ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+ <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+ <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
+ assigned-clock-rates = <200000000>, <200000000>;
+ power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
+ <&pd IMX_SC_R_MJPEG_DEC_S0>,
+ <&pd IMX_SC_R_MJPEG_DEC_S1>,
+ <&pd IMX_SC_R_MJPEG_DEC_S2>,
+ <&pd IMX_SC_R_MJPEG_DEC_S3>;
+ };
+
+ jpegenc: jpegenc@58450000 {
+ reg = <0x58450000 0x00050000>;
+ interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+ <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+ <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
+ assigned-clock-rates = <200000000>, <200000000>;
+ power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
+ <&pd IMX_SC_R_MJPEG_ENC_S0>,
+ <&pd IMX_SC_R_MJPEG_ENC_S1>,
+ <&pd IMX_SC_R_MJPEG_ENC_S2>,
+ <&pd IMX_SC_R_MJPEG_ENC_S3>;
+ };
+
+ img_jpeg_dec_lpcg: clock-controller@585d0000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x585d0000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&img_ipg_clk>, <&img_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>,
+ <IMX_LPCG_CLK_4>;
+ clock-output-names = "img_jpeg_dec_lpcg_clk",
+ "img_jpeg_dec_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>;
+ };
+
+ img_jpeg_enc_lpcg: clock-controller@585f0000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x585f0000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&img_ipg_clk>, <&img_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>,
+ <IMX_LPCG_CLK_4>;
+ clock-output-names = "img_jpeg_enc_lpcg_clk",
+ "img_jpeg_enc_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>;
+ };
+};
pmic@69 {
compatible = "mps,mp5416";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic>;
reg = <0x69>;
regulators {
+ /* vdd_0p95: DRAM/GPU/VPU */
buck1 {
- regulator-name = "vdd_0p95";
- regulator-min-microvolt = <805000>;
+ regulator-name = "buck1";
+ regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
- regulator-max-microamp = <2500000>;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
regulator-boot-on;
+ regulator-always-on;
};
+ /* vdd_soc */
buck2 {
- regulator-name = "vdd_soc";
- regulator-min-microvolt = <805000>;
+ regulator-name = "buck2";
+ regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
- regulator-max-microamp = <1000000>;
+ regulator-min-microamp = <2200000>;
+ regulator-max-microamp = <5200000>;
regulator-boot-on;
+ regulator-always-on;
};
+ /* vdd_arm */
buck3_reg: buck3 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <805000>;
+ regulator-name = "buck3";
+ regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
- regulator-max-microamp = <2200000>;
- regulator-boot-on;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
+ regulator-always-on;
};
+ /* vdd_1p8 */
buck4 {
- regulator-name = "vdd_1p8";
+ regulator-name = "buck4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-max-microamp = <500000>;
+ regulator-min-microamp = <2200000>;
+ regulator-max-microamp = <5200000>;
regulator-boot-on;
+ regulator-always-on;
};
+ /* nvcc_snvs_1p8 */
ldo1 {
- regulator-name = "nvcc_snvs_1p8";
+ regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-max-microamp = <300000>;
regulator-boot-on;
+ regulator-always-on;
};
+ /* vdd_snvs_0p8 */
ldo2 {
- regulator-name = "vdd_snvs_0p8";
+ regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-boot-on;
+ regulator-always-on;
};
+ /* vdd_0p9 */
ldo3 {
- regulator-name = "vdd_0p95";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
regulator-boot-on;
+ regulator-always-on;
};
+ /* vdd_1p8 */
ldo4 {
- regulator-name = "vdd_1p8";
+ regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
+ regulator-always-on;
};
};
};
>;
};
- pinctrl_pmic: pmicgrp {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
- >;
- };
-
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
pinctrl-0 = <&pinctrl_reg_usb1_en>;
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl_reg_usb1_en: regusb1grp {
fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41
+ MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x41
+ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x141
MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41
>;
};
pinctrl-0 = <&pinctrl_reg_usb2>;
compatible = "regulator-fixed";
regulator-name = "usb_usb2_vbus";
- gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
adc {
compatible = "gw,gsc-adc";
pinctrl_reg_usb2: regusb1grp {
fsl,pins = <
- MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x41
- MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x41
+ MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x41
+ MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x140
+ MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x140
>;
};
pinctrl_uart3_gpio: uart3gpiogrp {
fsl,pins = <
- MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000041 /* RS232# */
- MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* RS422# */
- MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000041 /* RS485# */
+ MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000110 /* RS232# */
+ MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000110 /* RS422# */
+ MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000110 /* RS485# */
>;
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+ model = "Gateworks Venice GW7902 i.MX8MM board";
+ compatible = "gw,imx8mm-gw7902", "fsl,imx8mm";
+
+ aliases {
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ can20m: can20m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <20000000>;
+ clock-output-names = "can20m";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key_erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
+ led-controller {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "panel1";
+ gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "panel2";
+ gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-2 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "panel3";
+ gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-3 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "panel4";
+ gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-4 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "panel5";
+ gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pps>;
+ gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb1_vbus: regulator-usb1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb1>;
+ regulator-name = "usb_usb1_vbus";
+ gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_wifi: regulator-wifi {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wl>;
+ regulator-name = "wifi";
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2>;
+};
+
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&can20m>;
+ oscillator-frequency = <20000000>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
+/* off-board header */
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ pinctrl-0 = <&pinctrl_gsc>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <700000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vin_4p0";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_0p9";
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_soc";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_arm";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_1p8";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_dram";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_1p0";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
+ pmic@4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ rohm,reset-snvs-powered;
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
+
+ regulators {
+ /* vdd_soc: 0.805-0.900V (typ=0.8V) */
+ BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ /* vdd_arm: 0.805-1.0V (typ=0.9V) */
+ buck2: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
+ };
+
+ /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+ BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd_3p3 */
+ BUCK4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd_1p8 */
+ BUCK5 {
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd_dram */
+ BUCK6 {
+ regulator-name = "buck6";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* nvcc_snvs_1p8 */
+ LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd_snvs_0p8 */
+ LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdda_1p8 */
+ LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ accelerometer@19 {
+ compatible = "st,lis2de12";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_accel>;
+ reg = <0x19>;
+ st,drdy-int-pin = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "INT1";
+ };
+};
+
+/* off-board header */
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+/* off-board header */
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+/* off-board header */
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
+/* RS232/RS485/RS422 selectable */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
+ rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+/* RS232 console */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+ rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ rts-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
+ dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "host";
+ vbus-supply = <®_usb1_vbus>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wifi>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */
+ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* M2_RST# */
+ MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */
+ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */
+ MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000041 /* AMP GPIO1 */
+ MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x40000041 /* AMP GPIO2 */
+ MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x40000041 /* AMP GPIO3 */
+ MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x40000041 /* AMP_GPIO4 */
+ MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */
+ MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* APP GPIO2 */
+ MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* UART2_EN# */
+ MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x40000041 /* MIPI_GPIO1 */
+ MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* MIPI_GPIO2 */
+ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* MIPI_GPIO3/PWM2 */
+ MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* MIPI_GPIO4/PWM3 */
+ >;
+ };
+
+ pinctrl_accel: accelgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x159
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* RST# */
+ MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* IRQ# */
+ MX8MM_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x141
+ MX8MM_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x141
+ >;
+ };
+
+ pinctrl_gsc: gscgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x40
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19
+ MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19
+ MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19
+ MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19
+ MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41
+ >;
+ };
+
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x141 /* PPS */
+ >;
+ };
+
+ pinctrl_reg_wl: regwlgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 /* WLAN_WLON */
+ >;
+ };
+
+ pinctrl_reg_usb1: regusb1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x41
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
+ MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
+ MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ >;
+ };
+
+ pinctrl_spi1: spi1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82
+ MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
+ MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
+ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40
+ MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x140 /* CAN_IRQ# */
+ >;
+ };
+
+ pinctrl_spi2: spi2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82
+ MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82
+ MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82
+ MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 /* SS0 */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+ MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+ MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x140 /* RTS */
+ MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x140 /* CTS */
+ >;
+ };
+
+ pinctrl_uart1_gpio: uart1gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x40000110 /* HALF */
+ MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000110 /* TERM */
+ MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x40000110 /* RS485 */
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart3_gpio: uart3_gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 /* BT_EN# */
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
+ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
+ MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x140 /* CTS */
+ MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x140 /* RTS */
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
+ MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
+ MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x140 /* CTS */
+ MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x140 /* RTS */
+ MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x140 /* DTR */
+ MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x140 /* DSR */
+ MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x140 /* DCD */
+ MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x140 /* RI */
+ MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x140 /* GNSS_PPS */
+ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x141 /* GNSS_GASP */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
};
timer {
};
usbphynop1: usbphynop1 {
+ #phy-cells = <0>;
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
};
usbphynop2: usbphynop2 {
+ #phy-cells = <0>;
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
- fsl,usbphy = <&usbphynop1>;
+ phys = <&usbphynop1>;
fsl,usbmisc = <&usbmisc1 0>;
status = "disabled";
};
clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
- fsl,usbphy = <&usbphynop2>;
+ phys = <&usbphynop2>;
fsl,usbmisc = <&usbmisc2 0>;
status = "disabled";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "imx8mn.dtsi"
+
+/ {
+ model = "Gateworks Venice GW7902 i.MX8MN board";
+ compatible = "gw,imx8mn-gw7902", "fsl,imx8mn";
+
+ aliases {
+ usb0 = &usbotg1;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ can20m: can20m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <20000000>;
+ clock-output-names = "can20m";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key_erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
+ led-controller {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "panel1";
+ gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "panel2";
+ gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-2 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "panel3";
+ gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-3 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "panel4";
+ gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-4 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "panel5";
+ gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pps>;
+ gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb1_vbus: regulator-usb1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb1>;
+ regulator-name = "usb_usb1_vbus";
+ gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_wifi: regulator-wifi {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wl>;
+ regulator-name = "wifi";
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2>;
+};
+
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&can20m>;
+ oscillator-frequency = <20000000>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
+/* off-board header */
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ pinctrl-0 = <&pinctrl_gsc>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <700000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vin_4p0";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_0p9";
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_soc";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_arm";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_1p8";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_dram";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_1p0";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
+ pmic@4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ rohm,reset-snvs-powered;
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
+
+ regulators {
+ /* vdd_soc: 0.805-0.900V (typ=0.8V) */
+ BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ /* vdd_arm: 0.805-1.0V (typ=0.9V) */
+ buck2: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
+ };
+
+ /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+ BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd_3p3 */
+ BUCK4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd_1p8 */
+ BUCK5 {
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd_dram */
+ BUCK6 {
+ regulator-name = "buck6";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* nvcc_snvs_1p8 */
+ LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd_snvs_0p8 */
+ LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdda_1p8 */
+ LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ accelerometer@19 {
+ compatible = "st,lis2de12";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_accel>;
+ reg = <0x19>;
+ st,drdy-int-pin = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "INT1";
+ };
+};
+
+/* off-board header */
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+/* off-board header */
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+/* off-board header */
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
+/* RS232/RS485/RS422 selectable */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
+ status = "okay";
+};
+
+/* RS232 console */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+ rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "host";
+ vbus-supply = <®_usb1_vbus>;
+ disable-over-current;
+ status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wifi>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */
+ MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* M2_RST# */
+ MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */
+ MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */
+ MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */
+ MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* APP GPIO2 */
+ MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* UART2_EN# */
+ MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x40000041 /* MIPI_GPIO1 */
+ MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* MIPI_GPIO2 */
+ MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* MIPI_GPIO3/PWM2 */
+ MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* MIPI_GPIO4/PWM3 */
+ >;
+ };
+
+ pinctrl_accel: accelgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x159
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* RST# */
+ MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* IRQ# */
+ MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x141
+ MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x141
+ >;
+ };
+
+ pinctrl_gsc: gscgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x40
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19
+ MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19
+ MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19
+ MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19
+ MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41
+ >;
+ };
+
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x141 /* PPS */
+ >;
+ };
+
+ pinctrl_reg_wl: regwlgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 /* WLAN_WLON */
+ >;
+ };
+
+ pinctrl_reg_usb1: regusb1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x41
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
+ MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
+ MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ >;
+ };
+
+ pinctrl_spi1: spi1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82
+ MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
+ MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
+ MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40
+ MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3 0x140 /* CAN_IRQ# */
+ >;
+ };
+
+ pinctrl_spi2: spi2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82
+ MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82
+ MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82
+ MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 /* SS0 */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+ MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart1_gpio: uart1gpiogrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x40000110 /* HALF */
+ MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000110 /* TERM */
+ MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x40000110 /* RS485 */
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart3_gpio: uart3_gpiogrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 /* BT_EN# */
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
+ MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
+ MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0 0x140 /* CTS */
+ MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1 0x140 /* RTS */
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
+ MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
+ MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x141 /* GNSS_GASP */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
};
psci {
clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
- fsl,usbphy = <&usbphynop1>;
+ phys = <&usbphynop1>;
fsl,usbmisc = <&usbmisc1 0>;
status = "disabled";
};
};
usbphynop1: usbphynop1 {
+ #phy-cells = <0>;
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
clock-output-names = "clk_ext4";
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dsp_reserved: dsp@92400000 {
+ reg = <0 0x92400000 0 0x2000000>;
+ no-map;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
};
psci {
#mbox-cells = <2>;
};
+ mu2: mailbox@30e60000 {
+ compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+ reg = <0x30e60000 0x10000>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
i2c5: i2c@30ad0000 {
compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
snps,dis-u2-freeclk-exists-quirk;
};
};
+
+ dsp: dsp@3b6e8000 {
+ compatible = "fsl,imx8mp-dsp";
+ reg = <0x3b6e8000 0x88000>;
+ mbox-names = "txdb0", "txdb1",
+ "rxdb0", "rxdb1";
+ mboxes = <&mu2 2 0>, <&mu2 2 1>,
+ <&mu2 3 0>, <&mu2 3 1>;
+ memory-region = <&dsp_reserved>;
+ status = "disabled";
+ };
};
};
assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
assigned-clock-rates = <200000000>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc2>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_usdhc2_vmmc>;
status = "okay";
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19
>;
-
};
pinctrl_fec1: fec1grp {
MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
-
>;
};
>;
};
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Copyright 2019-2021 MNT Research GmbH
+ * Copyright 2021 Lucas Stach <dev@lynxeye.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mq-nitrogen-som.dtsi"
+
+/ {
+ model = "MNT Reform 2";
+ compatible = "mntre,reform2", "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq";
+
+ pcie1_refclk: clock-pcie1-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ reg_main_5v: regulator-main-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_main_3v3: regulator-main-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_main_usb: regulator-main-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_PWR";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_main_5v>;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-wm8960";
+ audio-cpu = <&sai2>;
+ audio-codec = <&wm8960>;
+ audio-routing =
+ "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN",
+ "LINPUT1", "Mic Jack",
+ "Mic Jack", "MICB",
+ "LINPUT2", "Line In Jack",
+ "RINPUT2", "Line In Jack";
+ model = "wm8960-audio";
+ };
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ wm8960: codec@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ };
+
+ rtc@68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+};
+
+&pcie1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie1>;
+ reset-gpio = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+ <&clk IMX8MQ_CLK_PCIE2_AUX>,
+ <&clk IMX8MQ_CLK_PCIE2_PHY>,
+ <&pcie1_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ status = "okay";
+};
+
+®_1p8v {
+ vin-supply = <®_main_5v>;
+};
+
+®_snvs {
+ vin-supply = <®_main_5v>;
+};
+
+®_arm_dram {
+ vin-supply = <®_main_5v>;
+};
+
+®_dram_1p1v {
+ vin-supply = <®_main_5v>;
+};
+
+®_soc_gpu_vpu {
+ vin-supply = <®_main_5v>;
+};
+
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+ assigned-clock-rates = <25000000>;
+ fsl,sai-mclk-direction-output;
+ fsl,sai-asynchronous;
+ status = "okay";
+};
+
+&snvs_rtc {
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usb3_phy0 {
+ vbus-supply = <®_main_usb>;
+ status = "okay";
+};
+
+&usb3_phy1 {
+ vbus-supply = <®_main_usb>;
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+ assigned-clock-rates = <200000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ vqmmc-supply = <®_main_3v3>;
+ vmmc-supply = <®_main_3v3>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_pcie1: pcie1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x16
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
+ MX8MQ_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x45
+ MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x45
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Boundary Devices
+ * Copyright 2021 Lucas Stach <dev@lynxeye.de>
+ */
+
+#include "imx8mq.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX8MQ Nitrogen8M";
+ compatible = "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ reg_1p8v: regulator-fixed-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_snvs: regulator-fixed-snvs {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_SNVS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&{/opp-table/opp-800000000} {
+ opp-microvolt = <1000000>;
+};
+
+&{/opp-table/opp-1000000000} {
+ opp-microvolt = <1000000>;
+};
+
+&A53_0 {
+ cpu-supply = <®_arm_dram>;
+};
+
+&A53_1 {
+ cpu-supply = <®_arm_dram>;
+};
+
+&A53_2 {
+ cpu-supply = <®_arm_dram>;
+};
+
+&A53_3 {
+ cpu-supply = <®_arm_dram>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_pca9546>;
+ reg = <0x70>;
+ reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c1a: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_arm_dram: regulator@60 {
+ compatible = "fcs,fan53555";
+ reg = <0x60>;
+ regulator-name = "VDD_ARM_DRAM_1V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+
+ i2c1b: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_dram_1p1v: regulator@60 {
+ compatible = "fcs,fan53555";
+ reg = <0x60>;
+ regulator-name = "NVCC_DRAM_1P1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+ };
+
+ i2c1c: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_soc_gpu_vpu: regulator@60 {
+ compatible = "fcs,fan53555";
+ reg = <0x60>;
+ regulator-name = "VDD_SOC_GPU_VPU";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ };
+ };
+
+ i2c1d: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&pgc_gpu {
+ power-supply = <®_soc_gpu_vpu>;
+};
+
+&pgc_vpu {
+ power-supply = <®_soc_gpu_vpu>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc1 {
+ assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vqmmc-supply = <®_1p8v>;
+ vmmc-supply = <®_snvs>;
+ bus-width = <8>;
+ non-removable;
+ no-mmc-hs400;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
+ MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
+ MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x59
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c1_pca9546: i2c1-pca9546grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x49
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45
+ MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x45
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
- interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
};
psci {
status = "disabled";
};
+ mipi_csi1: csi@30a70000 {
+ compatible = "fsl,imx8mq-mipi-csi2";
+ reg = <0x30a70000 0x1000>;
+ clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+ <&clk IMX8MQ_CLK_CSI1_ESC>,
+ <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
+ clock-names = "core", "esc", "ui";
+ assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+ <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+ <&clk IMX8MQ_CLK_CSI1_ESC>;
+ assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+ <&clk IMX8MQ_SYS2_PLL_1000M>,
+ <&clk IMX8MQ_SYS1_PLL_800M>;
+ power-domains = <&pgc_mipi_csi1>;
+ resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
+ <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
+ <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
+ fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
+ interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+ interconnect-names = "dram";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi1_mipi_ep: endpoint {
+ remote-endpoint = <&csi1_ep>;
+ };
+ };
+ };
+ };
+
+ csi1: csi@30a90000 {
+ compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+ reg = <0x30a90000 0x10000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
+ clock-names = "mclk";
+ status = "disabled";
+
+ port {
+ csi1_ep: endpoint {
+ remote-endpoint = <&csi1_mipi_ep>;
+ };
+ };
+ };
+
+ mipi_csi2: csi@30b60000 {
+ compatible = "fsl,imx8mq-mipi-csi2";
+ reg = <0x30b60000 0x1000>;
+ clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+ <&clk IMX8MQ_CLK_CSI2_ESC>,
+ <&clk IMX8MQ_CLK_CSI2_PHY_REF>;
+ clock-names = "core", "esc", "ui";
+ assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+ <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
+ <&clk IMX8MQ_CLK_CSI2_ESC>;
+ assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+ <&clk IMX8MQ_SYS2_PLL_1000M>,
+ <&clk IMX8MQ_SYS1_PLL_800M>;
+ power-domains = <&pgc_mipi_csi2>;
+ resets = <&src IMX8MQ_RESET_MIPI_CSI2_CORE_RESET>,
+ <&src IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET>,
+ <&src IMX8MQ_RESET_MIPI_CSI2_ESC_RESET>;
+ fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>;
+ interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>;
+ interconnect-names = "dram";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi2_mipi_ep: endpoint {
+ remote-endpoint = <&csi2_ep>;
+ };
+ };
+ };
+ };
+
+ csi2: csi@30b80000 {
+ compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+ reg = <0x30b80000 0x10000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
+ clock-names = "mclk";
+ status = "disabled";
+
+ port {
+ csi2_ep: endpoint {
+ remote-endpoint = <&csi2_mipi_ep>;
+ };
+ };
+ };
+
mu: mailbox@30aa0000 {
compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
reg = <0x30aa0000 0x10000>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+&jpegdec {
+ compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec";
+};
+
+&jpegenc {
+ compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgenc";
+};
};
/* sorted in register address */
+ #include "imx8-ss-img.dtsi"
#include "imx8-ss-dma.dtsi"
#include "imx8-ss-conn.dtsi"
#include "imx8-ss-lsio.dtsi"
};
+#include "imx8qm-ss-img.dtsi"
#include "imx8qm-ss-dma.dtsi"
#include "imx8qm-ss-conn.dtsi"
#include "imx8qm-ss-lsio.dtsi"
fsl,pins = <
IMX8QXP_UART0_RX_ADMA_UART0_RX 0X06000020
IMX8QXP_UART0_TX_ADMA_UART0_TX 0X06000020
- IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020
+ IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020
IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020
>;
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ * Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&jpegdec {
+ compatible = "nxp,imx8qxp-jpgdec";
+};
+
+&jpegenc {
+ compatible = "nxp,imx8qxp-jpgenc";
+};
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a35-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
};
/* sorted in register address */
+ #include "imx8-ss-img.dtsi"
#include "imx8-ss-adma.dtsi"
#include "imx8-ss-conn.dtsi"
#include "imx8-ss-ddr.dtsi"
#include "imx8-ss-lsio.dtsi"
};
+#include "imx8qxp-ss-img.dtsi"
#include "imx8qxp-ss-adma.dtsi"
#include "imx8qxp-ss-conn.dtsi"
#include "imx8qxp-ss-lsio.dtsi"
<0x0 0xf3f20000 0x0 0x40000>,
<0x0 0xf5000000 0x0 0x2000>;
reg-names = "dbi", "apb", "phy", "config";
- bus-range = <0x0 0x1>;
+ bus-range = <0x0 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-puzzle-m801.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db-B.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db-B.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
status = "okay";
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+ /*
+ * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
+ * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
+ * 2 size cells and also expects that the second range starts at 16 MB offset. If these
+ * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address
+ * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window
+ * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB.
+ * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in
+ * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix):
+ * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7
+ * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf
+ * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33
+ */
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0xe8000000 0 0xe8000000 0 0x01000000 /* Port 0 IO */
+ 0x82000000 0 0xe9000000 0 0xe9000000 0 0x07000000>; /* Port 0 MEM */
/* enabled by U-Boot if PCIe module is present */
status = "disabled";
#interrupt-cells = <1>;
msi-parent = <&pcie0>;
msi-controller;
- ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */
- 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/
+ /*
+ * The 128 MiB address range [0xe8000000-0xf0000000] is
+ * dedicated for PCIe and can be assigned to 8 windows
+ * with size a power of two. Use one 64 KiB window for
+ * IO at the end and the remaining seven windows
+ * (totaling 127 MiB) for MEM.
+ */
+ ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */
+ 0x81000000 0 0xefff0000 0 0xefff0000 0 0x00010000>; /* Port 0 IO */
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 0>,
<0 0 0 2 &pcie_intc 1>,
&cp0_eth0 {
status = "okay";
/* Network PHY */
- phy-mode = "10gbase-kr";
+ phy-mode = "10gbase-r";
/* Generic PHY, providing serdes lanes */
phys = <&cp0_comphy2 0>;
stdout-path = "serial0:115200n8";
};
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
&cp0_eth0 {
status = "okay";
- phy-mode = "10gbase-kr";
+ phy-mode = "10gbase-r";
fixed-link {
speed = <10000>;
&cp1_eth0 {
status = "okay";
- phy-mode = "10gbase-kr";
+ phy-mode = "10gbase-r";
fixed-link {
speed = <10000>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#include "cn9130-crb.dtsi"
+
+/ {
+ model = "Marvell Armada CN9130-CRB-A";
+};
+
+&cp0_pcie0 {
+ status = "okay";
+ num-lanes = <4>;
+ num-viewport = <8>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy0 0
+ &cp0_comphy1 0
+ &cp0_comphy2 0
+ &cp0_comphy3 0>;
+ iommu-map =
+ <0x0 &smmu 0x480 0x20>,
+ <0x100 &smmu 0x4a0 0x20>,
+ <0x200 &smmu 0x4c0 0x20>;
+ iommu-map-mask = <0x031f>;
+};
+
+&cp0_usb3_0 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy0>;
+ phy-names = "usb";
+};
+
+&cp0_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy1>;
+ phy-names = "usb";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#include "cn9130-crb.dtsi"
+
+/ {
+ model = "Marvell Armada CN9130-CRB-B";
+};
+
+&cp0_pcie0 {
+ status = "okay";
+ num-lanes = <1>;
+ num-viewport = <8>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy0 0>;
+ iommu-map =
+ <0x0 &smmu 0x480 0x20>,
+ <0x100 &smmu 0x4a0 0x20>,
+ <0x200 &smmu 0x4c0 0x20>;
+ iommu-map-mask = <0x031f>;
+};
+
+&cp0_sata0 {
+ status = "okay";
+ sata-port@0 {
+ status = "okay";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy2 0>;
+ };
+};
+
+&cp0_usb3_0 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy0>;
+ phy-names = "usb";
+ phys = <&cp0_comphy1 0>;
+};
+
+&cp0_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy1>;
+ phy-names = "usb";
+ phys = <&cp0_comphy3 1>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#include "cn9130.dtsi" /* include SoC device tree */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ i2c0 = &cp0_i2c0;
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ ap0_reg_mmc_vccq: ap0_mmc_vccq@0 {
+ compatible = "regulator-gpio";
+ regulator-name = "ap0_mmc_vccq";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&expander0 5 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ };
+
+ cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp0-xhci1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp0_usb3_0_phy0: cp0_usb3_phy0 {
+ compatible = "usb-nop-xceiv";
+ };
+
+ cp0_usb3_0_phy1: cp0_usb3_phy1 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp0_reg_usb3_vbus1>;
+ };
+
+ cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+ compatible = "regulator-gpio";
+ regulator-name = "cp0_sd_vccq";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&cp0_gpio2 18 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ };
+
+ cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp0_sd_vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* on-board eMMC U6 */
+&ap_sdhci0 {
+ pinctrl-names = "default";
+ bus-width = <8>;
+ status = "okay";
+ mmc-ddr-1_8v;
+ vqmmc-supply = <&ap0_reg_mmc_vccq>;
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cp0_sdhci_cd_pins_crb: cp0-sdhci-cd-pins-crb {
+ marvell,pins = "mpp55";
+ marvell,function = "gpio";
+ };
+ cp0_sdhci_pins: cp0-sdhi-pins-0 {
+ marvell,pins = "mpp56", "mpp57", "mpp58",
+ "mpp59", "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ };
+};
+
+&cp0_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+ expander0: mcp23x17@20 {
+ compatible = "microchip,mcp23017";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ status = "okay";
+ };
+};
+
+&cp0_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c1_pins>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+
+&cp0_sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sdhci_pins
+ &cp0_sdhci_cd_pins_crb>;
+ bus-width = <4>;
+ cd-gpios = <&cp0_gpio2 23 GPIO_ACTIVE_HIGH>;
+ vqmmc-supply = <&cp0_reg_sd_vccq>;
+ vmmc-supply = <&cp0_reg_sd_vcc>;
+ status = "okay";
+};
+
+&cp0_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi0_pins>;
+ reg = <0x700680 0x50>, /* control */
+ <0x2000000 0x1000000>; /* CS0 */
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ /* On-board MUX does not allow higher frequencies */
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x200000>;
+ };
+
+ partition@400000 {
+ label = "Filesystem";
+ reg = <0x200000 0xe00000>;
+ };
+ };
+ };
+};
+
+&cp0_mdio {
+ status = "okay";
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cp0_xmdio {
+ status = "okay";
+ nbaset_phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+&cp0_eth0 {
+ /* This port is connected to 88E6393X switch */
+ status = "okay";
+ phy-mode = "10gbase-r";
+ managed = "in-band-status";
+ phys = <&cp0_comphy4 0>;
+};
+
+&cp0_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+ /* This port uses "2500base-t" phy-mode */
+ status = "disabled";
+ phy = <&nbaset_phy0>;
+ phys = <&cp0_comphy5 2>;
+};
+
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB board (setup "B").
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+ model = "Marvell Armada CN9130-DB setup B";
+};
+
+/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When NAND controller is enabled, SPI1 should be disabled.
+ */
+
+&cp0_nand_controller {
+ status = "okay";
+};
+
* Device tree for the CN9130-DB board.
*/
-#include "cn9130.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
+#include "cn9130-db.dtsi"
/ {
- model = "Marvell Armada CN9130-DB";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- gpio1 = &cp0_gpio1;
- gpio2 = &cp0_gpio2;
- i2c0 = &cp0_i2c0;
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth1;
- ethernet2 = &cp0_eth2;
- spi1 = &cp0_spi0;
- spi2 = &cp0_spi1;
- };
-
- memory@00000000 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- ap0_reg_sd_vccq: ap0_sd_vccq@0 {
- compatible = "regulator-gpio";
- regulator-name = "ap0_sd_vccq";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&expander0 8 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1 3300000 0x0>;
- };
-
- cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
- compatible = "regulator-fixed";
- regulator-name = "cp0-xhci0-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
- };
-
- cp0_usb3_0_phy0: cp0_usb3_phy@0 {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp0_reg_usb3_vbus0>;
- };
-
- cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
- compatible = "regulator-fixed";
- regulator-name = "cp0-xhci1-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
- };
-
- cp0_usb3_0_phy1: cp0_usb3_phy@1 {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp0_reg_usb3_vbus1>;
- };
-
- cp0_reg_sd_vccq: cp0_sd_vccq@0 {
- compatible = "regulator-gpio";
- regulator-name = "cp0_sd_vccq";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1
- 3300000 0x0>;
- };
-
- cp0_reg_sd_vcc: cp0_sd_vcc@0 {
- compatible = "regulator-fixed";
- regulator-name = "cp0_sd_vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- cp0_sfp_eth0: sfp-eth@0 {
- compatible = "sff,sfp";
- i2c-bus = <&cp0_sfpp0_i2c>;
- los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>;
- /*
- * SFP cages are unconnected on early PCBs because of an the I2C
- * lanes not being connected. Prevent the port for being
- * unusable by disabling the SFP node.
- */
- status = "disabled";
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-/* on-board eMMC - U9 */
-&ap_sdhci0 {
- pinctrl-names = "default";
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- vqmmc-supply = <&ap0_reg_sd_vccq>;
- status = "okay";
-};
-
-&cp0_crypto {
- status = "disabled";
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-/* SLM-1521-V2, CON9 */
-&cp0_eth0 {
- status = "disabled";
- phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp0_comphy4 0>;
- managed = "in-band-status";
- sfp = <&cp0_sfp_eth0>;
-};
-
-/* CON56 */
-&cp0_eth1 {
- status = "okay";
- phy = <&phy0>;
- phy-mode = "rgmii-id";
-};
-
-/* CON57 */
-&cp0_eth2 {
- status = "okay";
- phy = <&phy1>;
- phy-mode = "rgmii-id";
-};
-
-&cp0_gpio1 {
- status = "okay";
-};
-
-&cp0_gpio2 {
- status = "okay";
-};
-
-&cp0_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- clock-frequency = <100000>;
-
- /* U36 */
- expander0: pca953x@21 {
- compatible = "nxp,pca9555";
- pinctrl-names = "default";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x21>;
- status = "okay";
- };
-
- /* U42 */
- eeprom0: eeprom@50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- pagesize = <0x20>;
- };
-
- /* U38 */
- eeprom1: eeprom@57 {
- compatible = "atmel,24c64";
- reg = <0x57>;
- pagesize = <0x20>;
- };
-};
-
-&cp0_i2c1 {
- status = "okay";
- clock-frequency = <100000>;
-
- /* SLM-1521-V2 - U3 */
- i2c-mux@72 { /* verify address - depends on dpr */
- compatible = "nxp,pca9544";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72>;
- cp0_sfpp0_i2c: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- /* U12 */
- cp0_module_expander1: pca9555@21 {
- compatible = "nxp,pca9555";
- pinctrl-names = "default";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x21>;
- };
-
- };
- };
-};
-
-&cp0_mdio {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-/* U54 */
-&cp0_nand_controller {
- pinctrl-names = "default";
- pinctrl-0 = <&nand_pins &nand_rb>;
-
- nand@0 {
- reg = <0>;
- label = "main-storage";
- nand-rb = <0>;
- nand-ecc-mode = "hw";
- nand-on-flash-bbt;
- nand-ecc-strength = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x200000>;
- };
- partition@200000 {
- label = "Linux";
- reg = <0x200000 0xe00000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
- };
-};
-
-/* SLM-1521-V2, CON6 */
-&cp0_pcie0 {
- status = "okay";
- num-lanes = <4>;
- num-viewport = <8>;
- /* Generic PHY, providing serdes lanes */
- phys = <&cp0_comphy0 0
- &cp0_comphy1 0
- &cp0_comphy2 0
- &cp0_comphy3 0>;
-};
-
-&cp0_sata0 {
- status = "okay";
-
- /* SLM-1521-V2, CON2 */
- sata-port@1 {
- status = "okay";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp0_comphy5 1>;
- };
+ model = "Marvell Armada CN9130-DB setup A";
};
-/* CON 28 */
-&cp0_sdhci0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_sdhci_pins
- &cp0_sdhci_cd_pins>;
- bus-width = <4>;
- cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
- no-1-8-v;
- vqmmc-supply = <&cp0_reg_sd_vccq>;
- vmmc-supply = <&cp0_reg_sd_vcc>;
-};
+/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When SPI controller is enabled, NAND should be disabled.
+ */
-/* U55 */
&cp0_spi1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi0_pins>;
- reg = <0x700680 0x50>;
-
- spi-flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- /* On-board MUX does not allow higher frequencies */
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot-0";
- reg = <0x0 0x200000>;
- };
-
- partition@400000 {
- label = "Filesystem-0";
- reg = <0x200000 0xe00000>;
- };
- };
- };
};
-&cp0_syscon0 {
- cp0_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
-
- cp0_i2c0_pins: cp0-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp0_i2c1_pins: cp0-i2c-pins-1 {
- marvell,pins = "mpp35", "mpp36";
- marvell,function = "i2c1";
- };
- cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
- marvell,pins = "mpp0", "mpp1", "mpp2",
- "mpp3", "mpp4", "mpp5",
- "mpp6", "mpp7", "mpp8",
- "mpp9", "mpp10", "mpp11";
- marvell,function = "ge0";
- };
- cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
- marvell,pins = "mpp44", "mpp45", "mpp46",
- "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52",
- "mpp53", "mpp54", "mpp55";
- marvell,function = "ge1";
- };
- cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 {
- marvell,pins = "mpp43";
- marvell,function = "gpio";
- };
- cp0_sdhci_pins: cp0-sdhi-pins-0 {
- marvell,pins = "mpp56", "mpp57", "mpp58",
- "mpp59", "mpp60", "mpp61";
- marvell,function = "sdio";
- };
- cp0_spi0_pins: cp0-spi-pins-0 {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- nand_pins: nand-pins {
- marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18",
- "mpp19", "mpp20", "mpp21", "mpp22",
- "mpp23", "mpp24", "mpp25", "mpp26",
- "mpp27";
- marvell,function = "dev";
- };
- nand_rb: nand-rb {
- marvell,pins = "mpp13";
- marvell,function = "nf";
- };
- };
-};
-
-&cp0_utmi {
- status = "okay";
-};
-
-&cp0_usb3_0 {
- status = "okay";
- usb-phy = <&cp0_usb3_0_phy0>;
- phys = <&cp0_utmi0>;
- phy-names = "utmi";
- dr_mode = "host";
-};
-
-&cp0_usb3_1 {
- status = "okay";
- usb-phy = <&cp0_usb3_0_phy1>;
- phys = <&cp0_utmi1>;
- phy-names = "utmi";
- dr_mode = "host";
-};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB board.
+ */
+
+#include "cn9130.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ gpio1 = &cp0_gpio1;
+ gpio2 = &cp0_gpio2;
+ i2c0 = &cp0_i2c0;
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ spi1 = &cp0_spi0;
+ spi2 = &cp0_spi1;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ ap0_reg_sd_vccq: ap0_sd_vccq@0 {
+ compatible = "regulator-gpio";
+ regulator-name = "ap0_sd_vccq";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&expander0 8 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1 3300000 0x0>;
+ };
+
+ cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp0-xhci0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp0_usb3_0_phy0: cp0_usb3_phy@0 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp0_reg_usb3_vbus0>;
+ };
+
+ cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp0-xhci1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp0_usb3_0_phy1: cp0_usb3_phy@1 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp0_reg_usb3_vbus1>;
+ };
+
+ cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+ compatible = "regulator-gpio";
+ regulator-name = "cp0_sd_vccq";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ };
+
+ cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp0_sd_vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ cp0_sfp_eth0: sfp-eth@0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp0_sfpp0_i2c>;
+ los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>;
+ /*
+ * SFP cages are unconnected on early PCBs because of an the I2C
+ * lanes not being connected. Prevent the port for being
+ * unusable by disabling the SFP node.
+ */
+ status = "disabled";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+ pinctrl-names = "default";
+ bus-width = <8>;
+ vqmmc-supply = <&ap0_reg_sd_vccq>;
+ status = "okay";
+};
+
+&cp0_crypto {
+ status = "disabled";
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-r";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy4 0>;
+ managed = "in-band-status";
+ sfp = <&cp0_sfp_eth0>;
+};
+
+/* CON56 */
+&cp0_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+/* CON57 */
+&cp0_eth2 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+};
+
+&cp0_gpio1 {
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ clock-frequency = <100000>;
+
+ /* U36 */
+ expander0: pca953x@21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x21>;
+ status = "okay";
+ };
+
+ /* U42 */
+ eeprom0: eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <0x20>;
+ };
+
+ /* U38 */
+ eeprom1: eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ pagesize = <0x20>;
+ };
+};
+
+&cp0_i2c1 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /* SLM-1521-V2 - U3 */
+ i2c-mux@72 { /* verify address - depends on dpr */
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ cp0_sfpp0_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* U12 */
+ cp0_module_expander1: pca9555@21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x21>;
+ };
+
+ };
+ };
+};
+
+&cp0_mdio {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+/* U54 */
+&cp0_nand_controller {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins &nand_rb>;
+
+ nand@0 {
+ reg = <0>;
+ label = "main-storage";
+ nand-rb = <0>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x200000>;
+ };
+ partition@200000 {
+ label = "Linux";
+ reg = <0x200000 0xe00000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+ };
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_pcie0 {
+ status = "okay";
+ num-lanes = <4>;
+ num-viewport = <8>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy0 0
+ &cp0_comphy1 0
+ &cp0_comphy2 0
+ &cp0_comphy3 0>;
+};
+
+&cp0_sata0 {
+ status = "okay";
+
+ /* SLM-1521-V2, CON2 */
+ sata-port@1 {
+ status = "okay";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy5 1>;
+ };
+};
+
+/* CON 28 */
+&cp0_sdhci0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sdhci_pins
+ &cp0_sdhci_cd_pins>;
+ bus-width = <4>;
+ cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ vqmmc-supply = <&cp0_reg_sd_vccq>;
+ vmmc-supply = <&cp0_reg_sd_vcc>;
+};
+
+/* U55 */
+&cp0_spi1 {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi0_pins>;
+ reg = <0x700680 0x50>;
+
+ spi-flash@0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ /* On-board MUX does not allow higher frequencies */
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot-0";
+ reg = <0x0 0x200000>;
+ };
+
+ partition@400000 {
+ label = "Filesystem-0";
+ reg = <0x200000 0xe00000>;
+ };
+ };
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+ marvell,pins = "mpp0", "mpp1", "mpp2",
+ "mpp3", "mpp4", "mpp5",
+ "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+ cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+ marvell,pins = "mpp44", "mpp45", "mpp46",
+ "mpp47", "mpp48", "mpp49",
+ "mpp50", "mpp51", "mpp52",
+ "mpp53", "mpp54", "mpp55";
+ marvell,function = "ge1";
+ };
+ cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ cp0_sdhci_pins: cp0-sdhi-pins-0 {
+ marvell,pins = "mpp56", "mpp57", "mpp58",
+ "mpp59", "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ nand_pins: nand-pins {
+ marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18",
+ "mpp19", "mpp20", "mpp21", "mpp22",
+ "mpp23", "mpp24", "mpp25", "mpp26",
+ "mpp27";
+ marvell,function = "dev";
+ };
+ nand_rb: nand-rb {
+ marvell,pins = "mpp13";
+ marvell,function = "nf";
+ };
+ };
+};
+
+&cp0_utmi {
+ status = "okay";
+};
+
+&cp0_usb3_0 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy0>;
+ phys = <&cp0_utmi0>;
+ phy-names = "utmi";
+ dr_mode = "host";
+};
+
+&cp0_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy1>;
+ phys = <&cp0_utmi1>;
+ phy-names = "utmi";
+ dr_mode = "host";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board (setup "B").
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+ model = "Marvell Armada CN9131-DB setup B";
+};
+
+/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When NAND controller is enabled, SPI1 should be disabled.
+ */
+
+&cp0_nand_controller {
+ status = "okay";
+};
+
* Device tree for the CN9131-DB board.
*/
-#include "cn9130-db.dts"
+#include "cn9131-db.dtsi"
/ {
- model = "Marvell Armada CN9131-DB";
- compatible = "marvell,cn9131", "marvell,cn9130",
- "marvell,armada-ap807-quad", "marvell,armada-ap807";
-
- aliases {
- gpio3 = &cp1_gpio1;
- gpio4 = &cp1_gpio2;
- ethernet3 = &cp1_eth0;
- ethernet4 = &cp1_eth1;
- };
-
- cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_xhci0_vbus_pins>;
- regulator-name = "cp1-xhci0-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>;
- };
-
- cp1_usb3_0_phy0: cp1_usb3_phy0 {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp1_reg_usb3_vbus0>;
- };
-
- cp1_sfp_eth1: sfp-eth1 {
- compatible = "sff,sfp";
- i2c-bus = <&cp1_i2c0>;
- los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_sfp_pins>;
- /*
- * SFP cages are unconnected on early PCBs because of an the I2C
- * lanes not being connected. Prevent the port for being
- * unusable by disabling the SFP node.
- */
- status = "disabled";
- };
+ model = "Marvell Armada CN9131-DB setup A";
};
-/*
- * Instantiate the first slave CP115
+/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When SPI controller is enabled, NAND should be disabled.
*/
-#define CP11X_NAME cp1
-#define CP11X_BASE f4000000
-#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
-#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
-#define CP11X_PCIE0_BASE f4600000
-#define CP11X_PCIE1_BASE f4620000
-#define CP11X_PCIE2_BASE f4640000
-
-#include "armada-cp115.dtsi"
-
-#undef CP11X_NAME
-#undef CP11X_BASE
-#undef CP11X_PCIEx_MEM_BASE
-#undef CP11X_PCIEx_MEM_SIZE
-#undef CP11X_PCIE0_BASE
-#undef CP11X_PCIE1_BASE
-#undef CP11X_PCIE2_BASE
-
-&cp1_crypto {
- status = "disabled";
-};
-
-&cp1_ethernet {
- status = "okay";
-};
-
-/* CON50 */
-&cp1_eth0 {
- status = "disabled";
- phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy4 0>;
- managed = "in-band-status";
- sfp = <&cp1_sfp_eth1>;
-};
-
-&cp1_gpio1 {
- status = "okay";
-};
-
-&cp1_gpio2 {
- status = "okay";
-};
-
-&cp1_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_i2c0_pins>;
- clock-frequency = <100000>;
-};
-
-/* CON40 */
-&cp1_pcie0 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_pcie_reset_pins>;
- num-lanes = <2>;
- num-viewport = <8>;
- marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>;
- status = "okay";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy0 0
- &cp1_comphy1 0>;
-};
-
-&cp1_sata0 {
- status = "okay";
-
- /* CON32 */
- sata-port@1 {
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy5 1>;
- };
-};
-
-/* U24 */
-&cp1_spi1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_spi0_pins>;
- reg = <0x700680 0x50>;
-
- spi-flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- /* On-board MUX does not allow higher frequencies */
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot-1";
- reg = <0x0 0x200000>;
- };
-
- partition@400000 {
- label = "Filesystem-1";
- reg = <0x200000 0xe00000>;
- };
- };
- };
-
-};
-
-&cp1_syscon0 {
- cp1_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
-
- cp1_i2c0_pins: cp1-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp1_spi0_pins: cp1-spi-pins-0 {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
- marvell,pins = "mpp3";
- marvell,function = "gpio";
- };
- cp1_sfp_pins: sfp-pins {
- marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
- marvell,function = "gpio";
- };
- cp1_pcie_reset_pins: cp1-pcie-reset-pins {
- marvell,pins = "mpp0";
- marvell,function = "gpio";
- };
- };
-};
-
-/* CON58 */
-&cp1_utmi {
+&cp0_spi1 {
status = "okay";
};
-&cp1_usb3_1 {
- status = "okay";
- usb-phy = <&cp1_usb3_0_phy0>;
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy3 1>, <&cp1_utmi1>;
- phy-names = "usb", "utmi";
- dr_mode = "host";
-};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+ compatible = "marvell,cn9131", "marvell,cn9130",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ aliases {
+ gpio3 = &cp1_gpio1;
+ gpio4 = &cp1_gpio2;
+ ethernet3 = &cp1_eth0;
+ ethernet4 = &cp1_eth1;
+ };
+
+ cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_xhci0_vbus_pins>;
+ regulator-name = "cp1-xhci0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp1_usb3_0_phy0: cp1_usb3_phy0 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp1_reg_usb3_vbus0>;
+ };
+
+ cp1_sfp_eth1: sfp-eth1 {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp1_i2c0>;
+ los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_sfp_pins>;
+ /*
+ * SFP cages are unconnected on early PCBs because of an the I2C
+ * lanes not being connected. Prevent the port for being
+ * unusable by disabling the SFP node.
+ */
+ status = "disabled";
+ };
+};
+
+/*
+ * Instantiate the first slave CP115
+ */
+
+#define CP11X_NAME cp1
+#define CP11X_BASE f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f4600000
+#define CP11X_PCIE1_BASE f4620000
+#define CP11X_PCIE2_BASE f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+ status = "disabled";
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-r";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy4 0>;
+ managed = "in-band-status";
+ sfp = <&cp1_sfp_eth1>;
+};
+
+&cp1_gpio1 {
+ status = "okay";
+};
+
+&cp1_gpio2 {
+ status = "okay";
+};
+
+&cp1_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_i2c0_pins>;
+ clock-frequency = <100000>;
+};
+
+/* CON40 */
+&cp1_pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_pcie_reset_pins>;
+ num-lanes = <2>;
+ num-viewport = <8>;
+ marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy0 0
+ &cp1_comphy1 0>;
+};
+
+&cp1_sata0 {
+ status = "okay";
+
+ /* CON32 */
+ sata-port@1 {
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy5 1>;
+ };
+};
+
+/* U24 */
+&cp1_spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_spi0_pins>;
+ reg = <0x700680 0x50>;
+
+ spi-flash@0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ /* On-board MUX does not allow higher frequencies */
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot-1";
+ reg = <0x0 0x200000>;
+ };
+
+ partition@400000 {
+ label = "Filesystem-1";
+ reg = <0x200000 0xe00000>;
+ };
+ };
+ };
+
+};
+
+&cp1_syscon0 {
+ cp1_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ cp1_i2c0_pins: cp1-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp1_spi0_pins: cp1-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+ cp1_sfp_pins: sfp-pins {
+ marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
+ marvell,function = "gpio";
+ };
+ cp1_pcie_reset_pins: cp1-pcie-reset-pins {
+ marvell,pins = "mpp0";
+ marvell,function = "gpio";
+ };
+ };
+};
+
+/* CON58 */
+&cp1_utmi {
+ status = "okay";
+};
+
+&cp1_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp1_usb3_0_phy0>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy3 1>, <&cp1_utmi1>;
+ phy-names = "usb", "utmi";
+ dr_mode = "host";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9132-db.dtsi"
+
+/ {
+ model = "Marvell Armada CN9132-DB setup B";
+};
+
+/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When NAND controller is enabled, SPI1 should be disabled.
+ */
+
+&cp0_nand_controller {
+ status = "okay";
+};
+
* Device tree for the CN9132-DB board.
*/
-#include "cn9131-db.dts"
+#include "cn9132-db.dtsi"
/ {
- model = "Marvell Armada CN9132-DB";
- compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130",
- "marvell,armada-ap807-quad", "marvell,armada-ap807";
-
- aliases {
- gpio5 = &cp2_gpio1;
- gpio6 = &cp2_gpio2;
- ethernet5 = &cp2_eth0;
- };
-
- cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
- compatible = "regulator-fixed";
- regulator-name = "cp2-xhci0-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
- };
-
- cp2_usb3_0_phy0: cp2_usb3_phy0 {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp2_reg_usb3_vbus0>;
- };
-
- cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
- compatible = "regulator-fixed";
- regulator-name = "cp2-xhci1-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
- };
-
- cp2_usb3_0_phy1: cp2_usb3_phy1 {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp2_reg_usb3_vbus1>;
- };
-
- cp2_reg_sd_vccq: cp2_sd_vccq@0 {
- compatible = "regulator-gpio";
- regulator-name = "cp2_sd_vcc";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1 3300000 0x0>;
- };
-
- cp2_sfp_eth0: sfp-eth0 {
- compatible = "sff,sfp";
- i2c-bus = <&cp2_sfpp0_i2c>;
- los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
- /*
- * SFP cages are unconnected on early PCBs because of an the I2C
- * lanes not being connected. Prevent the port for being
- * unusable by disabling the SFP node.
- */
- status = "disabled";
- };
+ model = "Marvell Armada CN9132-DB setup A";
};
-/*
- * Instantiate the second slave CP115
+/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When SPI controller is enabled, NAND should be disabled.
*/
-#define CP11X_NAME cp2
-#define CP11X_BASE f6000000
-#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
-#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
-#define CP11X_PCIE0_BASE f6600000
-#define CP11X_PCIE1_BASE f6620000
-#define CP11X_PCIE2_BASE f6640000
-
-#include "armada-cp115.dtsi"
-
-#undef CP11X_NAME
-#undef CP11X_BASE
-#undef CP11X_PCIEx_MEM_BASE
-#undef CP11X_PCIEx_MEM_SIZE
-#undef CP11X_PCIE0_BASE
-#undef CP11X_PCIE1_BASE
-#undef CP11X_PCIE2_BASE
-
-&cp2_crypto {
- status = "disabled";
-};
-
-&cp2_ethernet {
+&cp0_spi1 {
status = "okay";
};
-/* SLM-1521-V2, CON9 */
-&cp2_eth0 {
- status = "disabled";
- phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp2_comphy4 0>;
- managed = "in-band-status";
- sfp = <&cp2_sfp_eth0>;
-};
-
-&cp2_gpio1 {
- status = "okay";
-};
-
-&cp2_gpio2 {
- status = "okay";
-};
-
-&cp2_i2c0 {
- clock-frequency = <100000>;
-
- /* SLM-1521-V2 - U3 */
- i2c-mux@72 {
- compatible = "nxp,pca9544";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72>;
- cp2_sfpp0_i2c: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- /* U12 */
- cp2_module_expander1: pca9555@21 {
- compatible = "nxp,pca9555";
- pinctrl-names = "default";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x21>;
- };
- };
- };
-};
-
-/* SLM-1521-V2, CON6 */
-&cp2_pcie0 {
- status = "okay";
- num-lanes = <2>;
- num-viewport = <8>;
- /* Generic PHY, providing serdes lanes */
- phys = <&cp2_comphy0 0
- &cp2_comphy1 0>;
-};
-
-/* SLM-1521-V2, CON8 */
-&cp2_pcie2 {
- status = "okay";
- num-lanes = <1>;
- num-viewport = <8>;
- /* Generic PHY, providing serdes lanes */
- phys = <&cp2_comphy5 2>;
-};
-
-&cp2_sata0 {
- status = "okay";
-
- /* SLM-1521-V2, CON4 */
- sata-port@0 {
- /* Generic PHY, providing serdes lanes */
- phys = <&cp2_comphy2 0>;
- };
-};
-
-/* CON 2 on SLM-1683 - microSD */
-&cp2_sdhci0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&cp2_sdhci_pins>;
- bus-width = <4>;
- cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>;
- vqmmc-supply = <&cp2_reg_sd_vccq>;
-};
-
-&cp2_syscon0 {
- cp2_pinctrl: pinctrl {
- compatible = "marvell,cp115-standalone-pinctrl";
-
- cp2_i2c0_pins: cp2-i2c-pins-0 {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp2_sdhci_pins: cp2-sdhi-pins-0 {
- marvell,pins = "mpp56", "mpp57", "mpp58",
- "mpp59", "mpp60", "mpp61";
- marvell,function = "sdio";
- };
- };
-};
-
-&cp2_utmi {
- status = "okay";
-};
-
-&cp2_usb3_0 {
- status = "okay";
- usb-phy = <&cp2_usb3_0_phy0>;
- phys = <&cp2_utmi0>;
- phy-names = "usb";
- dr_mode = "host";
-};
-
-/* SLM-1521-V2, CON11 */
-&cp2_usb3_1 {
- status = "okay";
- usb-phy = <&cp2_usb3_0_phy1>;
- /* Generic PHY, providing serdes lanes */
- phys = <&cp2_comphy3 1>, <&cp2_utmi1>;
- phy-names = "usb", "utmi";
- dr_mode = "host";
-};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+ compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ aliases {
+ gpio5 = &cp2_gpio1;
+ gpio6 = &cp2_gpio2;
+ ethernet5 = &cp2_eth0;
+ };
+
+ cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp2-xhci0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp2_usb3_0_phy0: cp2_usb3_phy0 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp2_reg_usb3_vbus0>;
+ };
+
+ cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp2-xhci1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp2_usb3_0_phy1: cp2_usb3_phy1 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp2_reg_usb3_vbus1>;
+ };
+
+ cp2_reg_sd_vccq: cp2_sd_vccq@0 {
+ compatible = "regulator-gpio";
+ regulator-name = "cp2_sd_vcc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1 3300000 0x0>;
+ };
+
+ cp2_sfp_eth0: sfp-eth0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp2_sfpp0_i2c>;
+ los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
+ /*
+ * SFP cages are unconnected on early PCBs because of an the I2C
+ * lanes not being connected. Prevent the port for being
+ * unusable by disabling the SFP node.
+ */
+ status = "disabled";
+ };
+};
+
+/*
+ * Instantiate the second slave CP115
+ */
+
+#define CP11X_NAME cp2
+#define CP11X_BASE f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f6600000
+#define CP11X_PCIE1_BASE f6620000
+#define CP11X_PCIE2_BASE f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp2_crypto {
+ status = "disabled";
+};
+
+&cp2_ethernet {
+ status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp2_eth0 {
+ status = "disabled";
+ phy-mode = "10gbase-r";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp2_comphy4 0>;
+ managed = "in-band-status";
+ sfp = <&cp2_sfp_eth0>;
+};
+
+&cp2_gpio1 {
+ status = "okay";
+};
+
+&cp2_gpio2 {
+ status = "okay";
+};
+
+&cp2_i2c0 {
+ clock-frequency = <100000>;
+
+ /* SLM-1521-V2 - U3 */
+ i2c-mux@72 {
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ cp2_sfpp0_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* U12 */
+ cp2_module_expander1: pca9555@21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x21>;
+ };
+ };
+ };
+};
+
+/* SLM-1521-V2, CON6 */
+&cp2_pcie0 {
+ status = "okay";
+ num-lanes = <2>;
+ num-viewport = <8>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp2_comphy0 0
+ &cp2_comphy1 0>;
+};
+
+/* SLM-1521-V2, CON8 */
+&cp2_pcie2 {
+ status = "okay";
+ num-lanes = <1>;
+ num-viewport = <8>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp2_comphy5 2>;
+};
+
+&cp2_sata0 {
+ status = "okay";
+
+ /* SLM-1521-V2, CON4 */
+ sata-port@0 {
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp2_comphy2 0>;
+ };
+};
+
+/* CON 2 on SLM-1683 - microSD */
+&cp2_sdhci0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp2_sdhci_pins>;
+ bus-width = <4>;
+ cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>;
+ vqmmc-supply = <&cp2_reg_sd_vccq>;
+};
+
+&cp2_syscon0 {
+ cp2_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ cp2_i2c0_pins: cp2-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp2_sdhci_pins: cp2-sdhi-pins-0 {
+ marvell,pins = "mpp56", "mpp57", "mpp58",
+ "mpp59", "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+ };
+};
+
+&cp2_utmi {
+ status = "okay";
+};
+
+&cp2_usb3_0 {
+ status = "okay";
+ usb-phy = <&cp2_usb3_0_phy0>;
+ phys = <&cp2_utmi0>;
+ phy-names = "usb";
+ dr_mode = "host";
+};
+
+/* SLM-1521-V2, CON11 */
+&cp2_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp2_usb3_0_phy1>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp2_comphy3 1>, <&cp2_utmi1>;
+ phy-names = "usb", "utmi";
+ dr_mode = "host";
+};
#include "mt8173.dtsi"
/ {
+ aliases {
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ mmc2 = &mmc3;
+ };
+
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x80000000>;
};
};
+&mfg_async {
+ domain-supply = <&da9211_vgpu_reg>;
+};
+
&cec {
status = "okay";
};
};
};
+&mfg_async {
+ domain-supply = <&da9211_vgpu_reg>;
+};
+
&cec {
status = "okay";
};
reg = <MT8173_POWER_DOMAIN_USB>;
#power-domain-cells = <0>;
};
- power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
+ mfg_async: power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
clocks = <&clk26m>;
clock-names = "mfg";
/ {
aliases {
serial0 = &uart0;
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
};
chosen {
reg = <0 0x14016000 0 0x1000>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>,
+ <CMDQ_EVENT_MUTEX_STREAM_DONE1>;
};
larb0: larb@14017000 {
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb
dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p3509-0000+p3636-0001.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb
cpu@0 {
device_type = "cpu";
- compatible = "nvidia,denver";
+ compatible = "nvidia,tegra132-denver";
reg = <0>;
};
cpu@1 {
device_type = "cpu";
- compatible = "nvidia,denver";
+ compatible = "nvidia,tegra132-denver";
reg = <1>;
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/mfd/max77620.h>
+
+#include "tegra186.dtsi"
+
+/ {
+ model = "NVIDIA Jetson TX2 NX Developer Kit";
+ compatible = "nvidia,p3509-0000+p3636-0001", "nvidia,tegra186";
+
+ aliases {
+ ethernet0 = "/ethernet@2490000";
+ i2c0 = "/bpmp/i2c";
+ i2c1 = "/i2c@3160000";
+ i2c2 = "/i2c@c240000";
+ i2c3 = "/i2c@3180000";
+ i2c4 = "/i2c@3190000";
+ i2c5 = "/i2c@31c0000";
+ i2c6 = "/i2c@c250000";
+ i2c7 = "/i2c@31e0000";
+ mmc0 = "/mmc@3460000";
+ serial0 = &uarta;
+ };
+
+ chosen {
+ bootargs = "earlycon console=ttyS0,115200n8";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x70000000>;
+ };
+
+ ethernet@2490000 {
+ status = "okay";
+
+ phy-reset-gpios = <&gpio_aon TEGRA186_AON_GPIO(AA, 6) GPIO_ACTIVE_LOW>;
+ phy-handle = <&phy>;
+ phy-mode = "rgmii-id";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy: phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0>;
+ interrupt-parent = <&gpio_aon>;
+ interrupts = <TEGRA186_AON_GPIO(AA, 7) IRQ_TYPE_LEVEL_LOW>;
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ memory-controller@2c00000 {
+ status = "okay";
+ };
+
+ timer@3010000 {
+ status = "okay";
+ };
+
+ serial@3100000 {
+ status = "okay";
+ };
+
+ i2c@3160000 {
+ status = "okay";
+ };
+
+ i2c@3180000 {
+ status = "okay";
+
+ power-monitor@40 {
+ compatible = "ti,ina3221";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ label = "VDD_IN";
+ shunt-resistor-micro-ohms = <5>;
+ };
+
+ channel@1 {
+ reg = <1>;
+ label = "VDD_CPU_GPU";
+ shunt-resistor-micro-ohms = <5>;
+ };
+
+ channel@2 {
+ reg = <2>;
+ label = "VDD_SOC";
+ shunt-resistor-micro-ohms = <>;
+ };
+ };
+ };
+
+ ddc: i2c@3190000 {
+ status = "okay";
+ };
+
+ i2c@31c0000 {
+ status = "okay";
+ };
+
+ i2c@31e0000 {
+ status = "okay";
+ };
+
+ /* SDMMC4 (eMMC) */
+ mmc@3460000 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+
+ vqmmc-supply = <&vdd_1v8_ap>;
+ vmmc-supply = <&vdd_3v3_sys>;
+ };
+
+ hda@3510000 {
+ nvidia,model = "jetson-tx2-hda";
+ status = "okay";
+ };
+
+ padctl@3520000 {
+ status = "okay";
+
+ avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
+ avdd-usb-supply = <&vdd_3v3_sys>;
+ vclamp-usb-supply = <&vdd_1v8>;
+ vddio-hsic-supply = <&gnd>;
+
+ pads {
+ usb2 {
+ status = "okay";
+
+ lanes {
+ micro_b: usb2-0 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-1 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+
+ usb2-2 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+ };
+ };
+
+ usb3 {
+ status = "okay";
+
+ lanes {
+ usb3-1 {
+ nvidia,function = "xusb";
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-0 {
+ status = "okay";
+ mode = "otg";
+ vbus-supply = <&vdd_5v0_sys>;
+ usb-role-switch;
+
+ connector {
+ compatible = "gpio-usb-b-connector",
+ "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ vbus-gpios = <&gpio
+ TEGRA186_MAIN_GPIO(L, 4)
+ GPIO_ACTIVE_LOW>;
+ id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usb2-1 {
+ status = "okay";
+ mode = "host";
+
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-2 {
+ status = "okay";
+ mode = "host";
+
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb3-1 {
+ nvidia,usb2-companion = <1>;
+ vbus-supply = <&vdd_5v0_sys>;
+ status = "okay";
+ };
+ };
+ };
+
+ usb@3530000 {
+ status = "okay";
+
+ phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+ <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ <&{/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+ <&{/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+ phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-1";
+ };
+
+ usb@3550000 {
+ status = "okay";
+
+ phys = <µ_b>;
+ phy-names = "usb2-0";
+ };
+
+ hsp@3c00000 {
+ status = "okay";
+ };
+
+ i2c@c240000 {
+ status = "okay";
+ };
+
+ i2c@c250000 {
+ status = "okay";
+
+ /* module ID EEPROM */
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+
+ label = "module";
+ vcc-supply = <&vdd_1v8>;
+ address-width = <8>;
+ pagesize = <8>;
+ size = <256>;
+ read-only;
+ };
+
+ /* carrier board ID EEPROM */
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+
+ label = "system";
+ vcc-supply = <&vdd_1v8>;
+ address-width = <8>;
+ pagesize = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
+ rtc@c2a0000 {
+ status = "okay";
+ };
+
+ pwm@c340000 {
+ status = "okay";
+ };
+
+ pmc@c360000 {
+ nvidia,invert-interrupt;
+ };
+
+ pcie@10003000 {
+ status = "okay";
+
+ dvdd-pex-supply = <&vdd_pex>;
+ hvdd-pex-pll-supply = <&vdd_1v8>;
+ hvdd-pex-supply = <&vdd_1v8>;
+ vddio-pexctl-aud-supply = <&vdd_1v8>;
+
+ pci@1,0 {
+ nvidia,num-lanes = <2>;
+ status = "okay";
+ };
+
+ pci@2,0 {
+ nvidia,num-lanes = <1>;
+ status = "disabled";
+ };
+
+ pci@3,0 {
+ nvidia,num-lanes = <1>;
+ status = "okay";
+ };
+ };
+
+ host1x@13e00000 {
+ status = "okay";
+
+ dpaux@15040000 {
+ status = "okay";
+ };
+
+ display-hub@15200000 {
+ status = "okay";
+ };
+
+ dsi@15300000 {
+ status = "disabled";
+ };
+
+ /* DP */
+ sor@15540000 {
+ status = "okay";
+
+ avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
+ vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
+
+ nvidia,dpaux = <&dpaux>;
+ };
+
+ /* HDMI */
+ sor@15580000 {
+ status = "okay";
+
+ avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
+ vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
+ hdmi-supply = <&vdd_hdmi>;
+
+ nvidia,ddc-i2c-bus = <&ddc>;
+ nvidia,hpd-gpio = <&gpio TEGRA186_MAIN_GPIO(P, 1)
+ GPIO_ACTIVE_LOW>;
+ };
+
+ dpaux@155c0000 {
+ status = "okay";
+ };
+ };
+
+ gpu@17000000 {
+ status = "okay";
+ };
+
+ fan: fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm4 0 45334>;
+
+ cooling-levels = <0 64 128 255>;
+ #cooling-cells = <2>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0)
+ GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
+ GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <10>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
+ GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <10>;
+ };
+ };
+
+ cpus {
+ cpu@0 {
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ enable-method = "psci";
+ };
+
+ cpu@4 {
+ enable-method = "psci";
+ };
+
+ cpu@5 {
+ enable-method = "psci";
+ };
+ };
+
+ bpmp {
+ i2c {
+ status = "okay";
+
+ pmic: pmic@3c {
+ compatible = "maxim,max77620";
+ reg = <0x3c>;
+
+ interrupt-parent = <&pmc>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77620_default>;
+
+ max77620_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ };
+
+ gpio1 {
+ pins = "gpio1";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+ };
+
+ gpio2 {
+ pins = "gpio2";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+ };
+
+ gpio3 {
+ pins = "gpio3";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+ };
+
+ gpio4 {
+ pins = "gpio4";
+ function = "32k-out1";
+ drive-push-pull = <1>;
+ };
+
+ gpio5 {
+ pins = "gpio5";
+ function = "gpio";
+ drive-push-pull = <0>;
+ };
+
+ gpio6 {
+ pins = "gpio6";
+ function = "gpio";
+ drive-push-pull = <1>;
+ };
+
+ gpio7 {
+ pins = "gpio7";
+ function = "gpio";
+ drive-push-pull = <1>;
+ };
+ };
+
+ fps {
+ fps0 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ };
+
+ fps1 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ };
+
+ fps2 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ };
+ };
+
+ regulators {
+ in-sd0-supply = <&vdd_5v0_sys>;
+ in-sd1-supply = <&vdd_5v0_sys>;
+ in-sd2-supply = <&vdd_5v0_sys>;
+ in-sd3-supply = <&vdd_5v0_sys>;
+
+ in-ldo0-1-supply = <&vdd_5v0_sys>;
+ in-ldo2-supply = <&vdd_5v0_sys>;
+ in-ldo3-5-supply = <&vdd_5v0_sys>;
+ in-ldo4-6-supply = <&vdd_1v8>;
+ in-ldo7-8-supply = <&avdd_dsi_csi>;
+
+ sd0 {
+ regulator-name = "VDD_DDR_1V1_PMIC";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ avdd_dsi_csi: sd1 {
+ regulator-name = "AVDD_DSI_CSI_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vdd_1v8: sd2 {
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vdd_3v3_sys: sd3 {
+ regulator-name = "VDD_3V3_SYS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_1v8_pll: ldo0 {
+ regulator-name = "VDD_1V8_AP_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo2 {
+ regulator-name = "VDDIO_3V3_AOHV";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vddio_sdmmc1: ldo3 {
+ regulator-name = "VDDIO_SDMMC1_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo4 {
+ regulator-name = "VDD_RTC";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vddio_sdmmc3: ldo5 {
+ regulator-name = "VDDIO_SDMMC3_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vdd_hdmi_1v05: ldo7 {
+ regulator-name = "VDD_HDMI_1V05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vdd_pex: ldo8 {
+ regulator-name = "VDD_PEX_1V05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ };
+ };
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ status = "okay";
+ method = "smc";
+ };
+
+ gnd: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "GND";
+ regulator-min-microvolt = <0>;
+ regulator-max-microvolt = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_5v0_sys: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_5V0_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8_ap: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V8_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vdd_1v8>;
+ };
+
+ vdd_hdmi: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_5V0_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ thermal-zones {
+ cpu {
+ polling-delay = <0>;
+ polling-delay-passive = <500>;
+ status = "okay";
+
+ trips {
+ cpu_trip_critical: critical {
+ temperature = <96500>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+
+ cpu_trip_hot: hot {
+ temperature = <79000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_trip_active: active {
+ temperature = <62000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_trip_passive: passive {
+ temperature = <45000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ cpu-critical {
+ cooling-device = <&fan 3 3>;
+ trip = <&cpu_trip_critical>;
+ };
+
+ cpu-hot {
+ cooling-device = <&fan 2 2>;
+ trip = <&cpu_trip_hot>;
+ };
+
+ cpu-active {
+ cooling-device = <&fan 1 1>;
+ trip = <&cpu_trip_active>;
+ };
+
+ cpu-passive {
+ cooling-device = <&fan 0 0>;
+ trip = <&cpu_trip_passive>;
+ };
+ };
+ };
+
+ gpu {
+ polling-delay = <0>;
+ polling-delay-passive = <500>;
+ status = "okay";
+
+ trips {
+ gpu_alert0: critical {
+ temperature = <99000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aux {
+ polling-delay = <0>;
+ polling-delay-passive = <500>;
+ status = "okay";
+
+ trips {
+ aux_alert0: critical {
+ temperature = <90000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
status = "disabled";
};
+ pwm1: pwm@3280000 {
+ compatible = "nvidia,tegra186-pwm";
+ reg = <0x0 0x3280000 0x0 0x10000>;
+ clocks = <&bpmp TEGRA186_CLK_PWM1>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA186_RESET_PWM1>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
+ pwm2: pwm@3290000 {
+ compatible = "nvidia,tegra186-pwm";
+ reg = <0x0 0x3290000 0x0 0x10000>;
+ clocks = <&bpmp TEGRA186_CLK_PWM2>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA186_RESET_PWM2>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
+ pwm3: pwm@32a0000 {
+ compatible = "nvidia,tegra186-pwm";
+ reg = <0x0 0x32a0000 0x0 0x10000>;
+ clocks = <&bpmp TEGRA186_CLK_PWM3>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA186_RESET_PWM3>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
+ pwm5: pwm@32c0000 {
+ compatible = "nvidia,tegra186-pwm";
+ reg = <0x0 0x32c0000 0x0 0x10000>;
+ clocks = <&bpmp TEGRA186_CLK_PWM5>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA186_RESET_PWM5>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
+ pwm6: pwm@32d0000 {
+ compatible = "nvidia,tegra186-pwm";
+ reg = <0x0 0x32d0000 0x0 0x10000>;
+ clocks = <&bpmp TEGRA186_CLK_PWM6>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA186_RESET_PWM6>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
+ pwm7: pwm@32e0000 {
+ compatible = "nvidia,tegra186-pwm";
+ reg = <0x0 0x32e0000 0x0 0x10000>;
+ clocks = <&bpmp TEGRA186_CLK_PWM7>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA186_RESET_PWM7>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
+ pwm8: pwm@32f0000 {
+ compatible = "nvidia,tegra186-pwm";
+ reg = <0x0 0x32f0000 0x0 0x10000>;
+ clocks = <&bpmp TEGRA186_CLK_PWM8>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA186_RESET_PWM8>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
sdmmc1: mmc@3400000 {
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03400000 0x0 0x10000>;
<&bpmp TEGRA186_CLK_XUSB_CORE_SS>,
<&bpmp TEGRA186_CLK_XUSB_FS>;
clock-names = "dev", "ss", "ss_src", "fs_src";
+ interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_DEVR &emc>,
+ <&mc TEGRA186_MEMORY_CLIENT_XUSB_DEVW &emc>;
+ interconnect-names = "dma-mem", "write";
iommus = <&smmu TEGRA186_SID_XUSB_DEV>;
power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBB>,
<&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
#interrupt-cells = <2>;
};
+ pwm4: pwm@c340000 {
+ compatible = "nvidia,tegra186-pwm";
+ reg = <0x0 0xc340000 0x0 0x10000>;
+ clocks = <&bpmp TEGRA186_CLK_PWM4>;
+ clock-names = "pwm";
+ resets = <&bpmp TEGRA186_RESET_PWM4>;
+ reset-names = "pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
pmc: pmc@c360000 {
compatible = "nvidia,tegra186-pmc";
reg = <0 0x0c360000 0 0x10000>,
interrupt-parent = <&gpio>;
interrupts = <TEGRA194_MAIN_GPIO(H, 2)
- IRQ_TYPE_LEVEL_LOW>;
+ IRQ_TYPE_EDGE_FALLING>;
vcc-supply = <&vdd_1v8ls>;
#thermal-sensor-cells = <1>;
};
pcie_ep@14160000 {
- compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+ compatible = "nvidia,tegra194-pcie-ep";
power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */
<0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */
};
pcie_ep@14180000 {
- compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+ compatible = "nvidia,tegra194-pcie-ep";
power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */
<0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */
};
pcie_ep@141a0000 {
- compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+ compatible = "nvidia,tegra194-pcie-ep";
power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */
<0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-dora.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-kagura.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-keyaki.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
&funnel0 { status = "okay"; };
&funnel1 { status = "okay"; };
&replicator { status = "okay"; };
+&stm { status = "okay"; };
&tpiu { status = "okay"; };
&smd_rpm_regulators {
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_phy {
+ status = "okay";
+};
+
&mdss {
status = "okay";
};
nand-bus-width = <8>;
};
};
+
+&qusb_phy_1 {
+ status = "ok";
+};
+
+&usb2 {
+ status = "ok";
+};
#size-cells = <2>;
ranges;
- rpm_msg_ram: memory@0x60000 {
+ rpm_msg_ram: memory@60000 {
reg = <0x0 0x60000 0x0 0x6000>;
no-map;
};
reg = <0x0 0x01905000 0x0 0x8000>;
};
- tcsr_q6: syscon@1945000 {
+ tcsr: syscon@1937000 {
compatible = "syscon";
- reg = <0x0 0x01945000 0x0 0xe000>;
+ reg = <0x0 0x01937000 0x0 0x21000>;
};
blsp_dma: dma-controller@7884000 {
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+ pcie_phy: phy@84000 {
+ compatible = "qcom,ipq6018-qmp-pcie-phy";
+ reg = <0x0 0x84000 0x0 0x1bc>; /* Serdes PLL */
+ status = "disabled";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+ <&gcc GCC_PCIE0_AHB_CLK>;
+ clock-names = "aux", "cfg_ahb";
+
+ resets = <&gcc GCC_PCIE0_PHY_BCR>,
+ <&gcc GCC_PCIE0PHY_PHY_BCR>;
+ reset-names = "phy",
+ "common";
+
+ pcie_phy0: lane@84200 {
+ reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */
+ <0x0 0x84400 0x0 0x200>, /* Serdes Rx */
+ <0x0 0x84800 0x0 0x4f4>; /* PCS: Lane0, COM, PCIE */
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "gcc_pcie0_pipe_clk_src";
+ #clock-cells = <0>;
+ };
+ };
+
+ pcie0: pci@20000000 {
+ compatible = "qcom,pcie-ipq6018";
+ reg = <0x0 0x20000000 0x0 0xf1d>,
+ <0x0 0x20000f20 0x0 0xa8>,
+ <0x0 0x20001000 0x0 0x1000>,
+ <0x0 0x80000 0x0 0x4000>,
+ <0x0 0x20100000 0x0 0x1000>;
+ reg-names = "dbi", "elbi", "atu", "parf", "config";
+
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ phys = <&pcie_phy0>;
+ phy-names = "pciephy";
+
+ ranges = <0x81000000 0 0x20200000 0 0x20200000
+ 0 0x10000>, /* downstream I/O */
+ <0x82000000 0 0x20220000 0 0x20220000
+ 0 0xfde0000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 75
+ IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 78
+ IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 79
+ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 83
+ IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+ <&gcc GCC_PCIE0_AXI_M_CLK>,
+ <&gcc GCC_PCIE0_AXI_S_CLK>,
+ <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+ <&gcc PCIE0_RCHNG_CLK>;
+ clock-names = "iface",
+ "axi_m",
+ "axi_s",
+ "axi_bridge",
+ "rchng";
+
+ resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+ <&gcc GCC_PCIE0_SLEEP_ARES>,
+ <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+ <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+ <&gcc GCC_PCIE0_AHB_ARES>,
+ <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
+ reset-names = "pipe",
+ "sleep",
+ "sticky",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "axi_m_sticky",
+ "axi_s_sticky";
+
+ status = "disabled";
+ };
+
watchdog@b017000 {
compatible = "qcom,kpss-wdt";
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
};
q6v5_wcss: remoteproc@cd00000 {
- compatible = "qcom,ipq8074-wcss-pil";
+ compatible = "qcom,ipq6018-wcss-pil";
reg = <0x0 0x0cd00000 0x0 0x4040>,
<0x0 0x004ab000 0x0 0x20>;
reg-names = "qdsp6",
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "prng";
- qcom,halt-regs = <&tcsr_q6 0xa000 0xd000 0x0>;
+ qcom,halt-regs = <&tcsr 0x18000 0x1b000 0xe000>;
qcom,smem-states = <&wcss_smp2p_out 0>,
<&wcss_smp2p_out 1>;
};
};
+ qusb_phy_1: qusb@59000 {
+ compatible = "qcom,ipq6018-qusb2-phy";
+ reg = <0x0 0x059000 0x0 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+ <&xo>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+ status = "disabled";
+ };
+
+ usb2: usb2@7000000 {
+ compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+ reg = <0x0 0x070F8800 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_USB1_MASTER_CLK>,
+ <&gcc GCC_USB1_SLEEP_CLK>,
+ <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+ clock-names = "master",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
+ <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+ assigned-clock-rates = <133330000>,
+ <24000000>;
+ resets = <&gcc GCC_USB1_BCR>;
+ status = "disabled";
+
+ dwc_1: usb@7000000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x7000000 0x0 0xcd00>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&qusb_phy_1>;
+ phy-names = "usb2-phy";
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ dr_mode = "host";
+ };
+ };
+
};
wcss: wcss-smp2p {
stdout-path = "serial0";
};
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0x0 0x20000000>;
};
method = "smc";
};
+ firmware {
+ scm {
+ compatible = "qcom,scm-ipq8074", "qcom,scm";
+ };
+ };
+
soc: soc {
#address-cells = <0x1>;
#size-cells = <0x1>;
status = "disabled";
};
+ prng: rng@e3000 {
+ compatible = "qcom,prng-ee";
+ reg = <0x000e3000 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
+ cryptobam: dma@704000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x00704000 0x20000>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <1>;
+ qcom,controlled-remotely = <1>;
+ status = "disabled";
+ };
+
+ crypto: crypto@73a000 {
+ compatible = "qcom,crypto-v5.1";
+ reg = <0x0073a000 0x6000>;
+ clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_CLK>;
+ clock-names = "iface", "bus", "core";
+ dmas = <&cryptobam 2>, <&cryptobam 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq8074-pinctrl";
reg = <0x01000000 0x300000>;
pcie1: pci@10000000 {
compatible = "qcom,pcie-ipq8074";
- reg = <0x10000000 0xf1d
- 0x10000f20 0xa8
- 0x00088000 0x2000
- 0x10100000 0x1000>;
+ reg = <0x10000000 0xf1d>,
+ <0x10000f20 0xa8>,
+ <0x00088000 0x2000>,
+ <0x10100000 0x1000>;
reg-names = "dbi", "elbi", "parf", "config";
device_type = "pci";
linux,pci-domain = <1>;
pcie0: pci@20000000 {
compatible = "qcom,pcie-ipq8074";
- reg = <0x20000000 0xf1d
- 0x20000f20 0xa8
- 0x00080000 0x2000
- 0x20100000 0x1000>;
+ reg = <0x20000000 0xf1d>,
+ <0x20000f20 0xa8>,
+ <0x00080000 0x2000>,
+ <0x20100000 0x1000>;
reg-names = "dbi", "elbi", "parf", "config";
device_type = "pci";
linux,pci-domain = <0>;
/ {
model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
- compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1",
- "qcom,msm8916", "qcom,mtp";
+ compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2020 Stephan Gerhold
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Xiaomi Redmi 2 (Wingtech WT88047)";
+ compatible = "wingtech,wt88047", "qcom,msm8916";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default>;
+
+ label = "GPIO Buttons";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_id_default>;
+ };
+};
+
+&blsp_i2c2 {
+ status = "okay";
+
+ imu@68 {
+ compatible = "invensense,mpu6880";
+ reg = <0x68>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&imu_default>;
+
+ mount-matrix = "1", "0", "0",
+ "0", "-1", "0",
+ "0", "0", "1";
+ };
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ touchscreen@38 {
+ /* Likely some other model but works just fine with this one */
+ compatible = "edt,edt-ft5506";
+ reg = <0x38>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&pm8916_l17>;
+ iovcc-supply = <&pm8916_l6>;
+
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_default>;
+ };
+};
+
+&blsp_i2c6 {
+ status = "okay";
+
+ led-controller@45 {
+ compatible = "awinic,aw2013";
+ reg = <0x45>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vcc-supply = <&pm8916_l16>;
+
+ led@0 {
+ reg = <0>;
+ led-max-microamp = <15000>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ led-max-microamp = <15000>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@2 {
+ reg = <2>;
+ led-max-microamp = <15000>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&pm8916_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&pronto {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+ non-removable;
+};
+
+&usb {
+ status = "okay";
+ extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&smd_rpm_regulators {
+ vdd_l1_l2_l3-supply = <&pm8916_s3>;
+ vdd_l4_l5_l6-supply = <&pm8916_s4>;
+ vdd_l7-supply = <&pm8916_s4>;
+
+ s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l8 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+};
+
+&msmgpio {
+ gpio_keys_default: gpio-keys-default {
+ pins = "gpio107";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ imu_default: imu-default {
+ pins = "gpio115";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ touchscreen_default: touchscreen-default {
+ pins = "gpio13";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+
+ reset {
+ pins = "gpio12";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ usb_id_default: usb-id-default {
+ pins = "gpio110";
+ function = "gpio";
+
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
<&rpmcc RPM_SMD_SNOC_A_CLK>;
};
+ stm: stm@802000 {
+ compatible = "arm,coresight-stm", "arm,primecell";
+ reg = <0x00802000 0x1000>,
+ <0x09280000 0x180000>;
+ reg-names = "stm-base", "stm-stimulus-base";
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ stm_out: endpoint {
+ remote-endpoint = <&funnel0_in7>;
+ };
+ };
+ };
+ };
+
/* System CTIs */
/* CTI 0 - TMC connections */
cti0: cti@810000 {
remote-endpoint = <&funnel1_out>;
};
};
+
+ port@7 {
+ reg = <7>;
+ funnel0_in7: endpoint {
+ remote-endpoint = <&stm_out>;
+ };
+ };
};
out-ports {
chosen { };
clocks {
- xo_board: xo_board {
+ xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
+ clock-output-names = "xo_board";
};
- sleep_clk: sleep_clk {
+ sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
+ clock-output-names = "sleep_clk";
};
};
power-domains = <&gcc USB30_GDSC>;
qcom,select-utmi-as-pipe-clk;
- dwc3@f9200000 {
+ usb@f9200000 {
compatible = "snps,dwc3";
reg = <0xf9200000 0xcc00>;
interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_phy {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "msm8996-sony-xperia-tone-dora.dts"
+#include "pmi8996.dtsi"
+
+/ {
+ model = "Sony Xperia X Performance (PMI8996)";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "msm8996-sony-xperia-tone-kagura.dts"
+#include "pmi8996.dtsi"
+
+/ {
+ model = "Sony Xperia XZ (PMI8996)";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "msm8996-sony-xperia-tone-keyaki.dts"
+#include "pmi8996.dtsi"
+
+/ {
+ model = "Sony Xperia XZs (PMI8996)";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8996-sony-xperia-tone.dtsi"
+
+/ {
+ model = "Sony Xperia X Performance";
+ compatible = "sony,dora-row", "qcom,msm8996";
+};
+
+/delete-node/ &tof_sensor;
+/delete-node/ &pm8994_l11;
+/delete-node/ &pm8994_l14;
+
+&usb_detect {
+ pins = "gpio24";
+};
+
+&usb3_id {
+ id-gpio = <&tlmm 24 GPIO_ACTIVE_LOW>;
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8996-sony-xperia-tone.dtsi"
+
+/ {
+ model = "Sony Xperia XZ";
+ compatible = "sony,kagura-row", "qcom,msm8996";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8996-sony-xperia-tone.dtsi"
+
+/ {
+ model = "Sony Xperia XZs";
+ compatible = "sony,keyaki-row", "qcom,msm8996";
+};
+
+&pm8994_l19 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+};
+
+&pm8994_l30 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-pull-down;
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+/delete-node/ &slpi_region;
+/delete-node/ &venus_region;
+/delete-node/ &zap_shader_region;
+
+/ {
+ qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */
+ qcom,pmic-id = <0x20009 0x2000a 0 0>; /* PM8994 + PMI8994 */
+ qcom,board-id = <8 0>;
+
+ chosen {
+ /*
+ * Due to an unknown-for-a-few-years regression,
+ * SDHCI only works on MSM8996 in PIO (lame) mode.
+ */
+ bootargs = "sdhci.debug_quirks=0x40 sdhci.debug_quirks2=0x4 maxcpus=2";
+ };
+
+ reserved-memory {
+ ramoops@a7f00000 {
+ compatible = "ramoops";
+ reg = <0 0xa7f00000 0 0x100000>;
+ record-size = <0x20000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x20000>;
+ pmsg-size = <0x20000>;
+ ecc-size = <16>;
+ };
+
+ cont_splash_mem: memory@83401000 {
+ reg = <0 0x83401000 0 0x23ff000>;
+ no-map;
+ };
+
+ zap_shader_region: gpu@90400000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x90400000 0x0 0x2000>;
+ no-map;
+ };
+
+ slpi_region: memory@90500000 {
+ reg = <0 0x90500000 0 0xa00000>;
+ no-map;
+ };
+
+ venus_region: memory@90f00000 {
+ reg = <0 0x90f00000 0 0x500000>;
+ no-map;
+ };
+ };
+
+ panel_tvdd: tvdd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "panel_tvdd";
+ gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&tp_vddio_en>;
+ pinctrl-names = "default";
+ };
+
+ usb3_id: usb3-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&tlmm 25 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_detect>;
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ wlan_en: wlan-en-1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl_reg_on>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ tof_sensor: vl53l0x@29 {
+ compatible = "st,vl53l0x";
+ reg = <0x29>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp2_i2c5 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ /* FUSB301 USB-C controller */
+};
+
+&blsp2_i2c6 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ synaptics@2c {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x2c>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&panel_tvdd>;
+
+ syna,reset-delay-ms = <220>;
+ syna,startup-delay-ms = <220>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp2_uart2 {
+ status = "okay";
+};
+
+&camera0_mclk {
+ drive-strength = <2>;
+ output-low;
+};
+
+&camera0_pwdn {
+ drive-strength = <2>;
+ output-low;
+};
+
+&camera0_rst {
+ pins = "gpio30";
+ drive-strength = <2>;
+ output-low;
+};
+
+&camera2_mclk {
+ drive-strength = <2>;
+ output-low;
+};
+
+&camera2_rst {
+ drive-strength = <2>;
+ output-low;
+};
+
+&hsusb_phy1 {
+ status = "okay";
+
+ vdda-pll-supply = <&pm8994_l12>;
+ vdda-phy-dpdm-supply = <&pm8994_l24>;
+};
+
+&mmcc {
+ vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&pcie0 {
+ status = "okay";
+ perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+ vddpe-3v3-supply = <&wlan_en>;
+ vdda-supply = <&pm8994_l28>;
+};
+
+&pcie_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&pm8994_l28>;
+ vdda-pll-supply = <&pm8994_l12>;
+};
+
+&pm8994_gpios {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pm8994_gpios_defaults>;
+ gpio-line-names =
+ "NC",
+ "VOL_DOWN_N",
+ "VOL_UP_N",
+ "SNAPSHOT_N",
+ "FOCUS_N",
+ "NC",
+ "NFC_VEN",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "EAR_EN",
+ "NC",
+ "PM_DIVCLK1",
+ "PMI_CLK",
+ "NC",
+ "WL_SLEEP_CLK",
+ "NC",
+ "PMIC_SPON",
+ "UIM_BATT_ALARM",
+ "PMK_SLEEP_CLK";
+
+ /*
+ * We don't yet know for sure which GPIOs are of our interest, but what
+ * we do know is that if a vendor sets the pins to a non-default state, there's
+ * probably a reason for it, and just to be on the safe side, we follow suit.
+ */
+ pm8994_gpios_defaults: pm8994-gpios-default-state {
+ pm8994-gpio1-nc {
+ pins = "gpio1";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ bias-high-impedance;
+ };
+
+ vol-down-n {
+ pins = "gpio2";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ vol-up-n {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ input-enable;
+ bias-pull-up;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ camera-snapshot-n {
+ pins = "gpio4";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ camera-focus-n {
+ pins = "gpio5";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ pm8994-gpio6-nc {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ bias-high-impedance;
+ power-source = <PM8994_GPIO_VPH>;
+ };
+
+ nfc-download {
+ pins = "gpio7";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ drive-push-pull;
+ bias-disable;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ pm8994-gpio8-nc {
+ pins = "gpio8";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ drive-push-pull;
+ bias-high-impedance;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_VPH>;
+ };
+
+ pm8994-gpio9-nc {
+ pins = "gpio9";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-high;
+ drive-push-pull;
+ bias-high-impedance;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ power-source = <PM8994_GPIO_VPH>;
+ };
+
+ nfc-clock {
+ pins = "gpio10";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-enable;
+ drive-push-pull;
+ bias-pull-down;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ pm8994-gpio11-nc {
+ pins = "gpio11";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ bias-high-impedance;
+ power-source = <PM8994_GPIO_VPH>;
+ };
+
+ pm8994-gpio12-nc {
+ pins = "gpio12";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ bias-high-impedance;
+ power-source = <PM8994_GPIO_VPH>;
+ };
+
+ ear-enable {
+ pins = "gpio13";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-high;
+ drive-push-pull;
+ bias-disable;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ pm8994-gpio14-nc {
+ pins = "gpio14";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ input-enable;
+ bias-high-impedance;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ power-source = <PM8994_GPIO_VPH>;
+ };
+
+ pm-divclk1-gpio {
+ pins = "gpio15";
+ function = "func1";
+ output-high;
+ drive-push-pull;
+ bias-high-impedance;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ power-source = <PM8994_GPIO_VPH>;
+ };
+
+ pmi-clk-gpio {
+ pins = "gpio16";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ };
+
+ pm8994-gpio17-nc {
+ pins = "gpio17";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ bias-high-impedance;
+ power-source = <PM8994_GPIO_VPH>;
+ };
+
+ rome-sleep {
+ pins = "gpio18";
+ function = PMIC_GPIO_FUNC_FUNC2;
+ output-low;
+ drive-push-pull;
+ bias-disable;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ pm8994-gpio19-nc {
+ pins = "gpio19";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ drive-push-pull;
+ bias-high-impedance;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_VPH>;
+ };
+
+ pm8994-gpio22-nc {
+ pins = "gpio22";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ bias-high-impedance;
+ power-source = <PM8994_GPIO_VPH>;
+ };
+ };
+};
+
+&pm8994_mpps {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pm8994_mpps_defaults>;
+
+ gpio-line-names =
+ "SDC_UIM_VBIAS",
+ "LCD_ID_ADC",
+ "VREF_DACX",
+ "NC",
+ "FLASH_THERM",
+ "NC",
+ "NC",
+ "RF_ID";
+
+ pm8994_mpps_defaults: pm8994-mpps-default-state {
+ lcd-id_adc-mpp {
+ pins = "mpp2";
+ function = "analog";
+ input-enable;
+ qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>;
+ };
+
+ pm-mpp4-nc {
+ pins = "mpp4";
+ function = "digital";
+ bias-high-impedance;
+ power-source = <PM8994_GPIO_VPH>;
+ };
+
+ flash-therm-mpp {
+ pins = "mpp5";
+ function = "analog";
+ input-enable;
+ qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
+ };
+
+ mpp6-nc {
+ pins = "mpp6";
+ function = "digital";
+ bias-high-impedance;
+ };
+
+ rf-id-mpp {
+ pins = "mpp8";
+ function = "analog";
+ input-enable;
+ qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH8>;
+ };
+ };
+};
+
+&pm8994_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEUP>;
+};
+
+&pmi8994_gpios {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmi8994_gpios_defaults>;
+
+ gpio-line-names =
+ "VIB_LDO_EN",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "USB_SWITCH_SEL",
+ "NC";
+
+ pmi8994_gpios_defaults: pmi8994-gpios-default-state {
+ vib-ldo-en-gpio {
+ pins = "gpio1";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ output-low;
+ bias-disable;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ pmi-gpio2-nc {
+ pins = "gpio2";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ input-enable;
+ bias-high-impedance;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_VPH>;
+ };
+
+ pmi-gpio3-nc {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ input-enable;
+ bias-high-impedance;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_VPH>;
+ };
+
+ pmi-gpio4-nc {
+ pins = "gpio4";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ output-high;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ pmi-gpio5-nc {
+ pins = "gpio5";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ output-high;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ pmi-gpio6-nc {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ output-high;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ pmi-gpio7-nc {
+ pins = "gpio7";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ output-high;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ pmi-gpio8-nc {
+ pins = "gpio8";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ output-high;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ usb-switch-sel {
+ pins = "gpio9";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ drive-push-pull;
+ };
+
+ pmi-gpio10-nc {
+ pins = "gpio10";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ drive-push-pull;
+ bias-disable;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>;
+ };
+ };
+};
+
+&pmi8994_spmi_regulators {
+ qcom,saw-reg = <&saw3>;
+
+ vdd_gfx:
+ pmi8994_s2: s2 {
+ /* Pinned to a high value for now to avoid random crashes. */
+ regulator-min-microvolt = <1015000>;
+ regulator-max-microvolt = <1015000>;
+ regulator-name = "vdd_gfx";
+ regulator-always-on;
+ };
+
+ pmi8994_s9: s9 {
+ qcom,saw-slave;
+ };
+
+ pmi8994_s10: s10 {
+ qcom,saw-slave;
+ };
+
+ pmi8994_s11: s11 {
+ qcom,saw-leader;
+ regulator-always-on;
+ regulator-min-microvolt = <470000>;
+ regulator-max-microvolt = <1140000>;
+ };
+};
+
+&pmi8994_wled {
+ status = "okay";
+ default-brightness = <512>;
+};
+
+&rpm_requests {
+ pm8994-regulators {
+ compatible = "qcom,rpm-pm8994-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_l1-supply = <&pm8994_s3>;
+ vdd_l2_l26_l28-supply = <&pm8994_s3>;
+ vdd_l3_l11-supply = <&pm8994_s3>;
+ vdd_l4_l27_l31-supply = <&pm8994_s3>;
+ vdd_l5_l7-supply = <&pm8994_s5>;
+ vdd_l6_l12_l32-supply = <&pm8994_s5>;
+ vdd_l8_l16_l30-supply = <&vph_pwr>;
+ vdd_l14_l15-supply = <&pm8994_s5>;
+ vdd_l20_l21-supply = <&pm8994_s5>;
+ vdd_l25-supply = <&pm8994_s3>;
+ vdd_lvs1_2-supply = <&pm8994_s4>;
+
+ pm8994_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8994_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-system-load = <325000>;
+ regulator-always-on;
+ };
+
+ pm8994_s5: s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ pm8994_s7: s7 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ pm8994_l1: l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8994_l2: l2 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ };
+
+ pm8994_l3: l3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ pm8994_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ /* L6 and L7 seem unused. */
+
+ pm8994_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l11: l11 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ pm8994_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ };
+
+ pm8994_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <22000>;
+ regulator-allow-set-load;
+ };
+
+ pm8994_l14: l14 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ };
+
+ pm8994_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8994_l17: l17 {
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ pm8994_l18: l18 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l19: l19 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8994_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <570000>;
+ regulator-allow-set-load;
+ };
+
+ pm8994_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <800000>;
+ regulator-allow-set-load;
+ };
+
+ pm8994_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8994_l23: l23 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8994_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ regulator-allow-set-load;
+ };
+
+ pm8994_l25: l25 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-allow-set-load;
+ };
+
+ pm8994_l27: l27 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8994_l28: l28 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-allow-set-load;
+ };
+
+ pm8994_l29: l29 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8994_l30: l30 { };
+
+ pm8994_l32: l32 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+};
+
+&sdhc1 {
+ /* eMMC doesn't seem to cooperate even in PIO mode.. */
+ status = "disabled";
+
+ vmmc-supply = <&pm8994_l20>;
+ vqmmc-supply = <&pm8994_s4>;
+ mmc-hs400-1_8v;
+ mmc-hs200-1_8v;
+};
+
+&sdhc2 {
+ status = "okay";
+
+ cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <&pm8994_l21>;
+ vqmmc-supply = <&pm8994_l13>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>;
+ pinctrl-0 = <&sw_service_gpio>;
+ pinctrl-names = "default";
+
+ disp_reset_n_gpio: disp-reset-n {
+ pins = "gpio8";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ mdp_vsync_p_gpio: mdp-vsync-p {
+ pins = "gpio10";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sw_service_gpio: sw-service-gpio {
+ pins = "gpio16";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ usb_detect: usb-detect {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+
+ uim_detect_en: uim-detect-en {
+ pins = "gpio29";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+
+ tray_det_pin: tray-det {
+ pins = "gpio40";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tp_vddio_en: tp-vddio-en {
+ pins = "gpio50";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+
+ lcd_vddio_en: lcd-vddio-en {
+ pins = "gpio51";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ wl_host_wake: wl-host-wake {
+ pins = "gpio79";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ input-high;
+ };
+
+ wl_reg_on: wl-reg-on {
+ pins = "gpio84";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ ts_reset_n: ts-rst-n {
+ pins = "gpio89";
+ function = "gpio";
+ drive-strength = <2>;
+ };
+
+ touch_int_n: touch-int-n {
+ pins = "gpio125";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ touch_int_sleep: touch-int-sleep {
+ pins = "gpio125";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+};
+
+/*
+ * For reasons that are currently unknown (but probably related to fusb301), USB takes about
+ * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
+ */
+&usb3 {
+ status = "okay";
+ qcom,select-utmi-as-pipe-clk;
+};
+
+&usb3_dwc3 {
+ extcon = <&usb3_id>;
+ dr_mode = "peripheral";
+ phys = <&hsusb_phy1>;
+ phy-names = "usb2-phy";
+ snps,hird-threshold = /bits/ 8 <0>;
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+ qcom,msm-id = <246 0x30000>;
+};
+
+ /*
+ * This revision seems to have differ GPU CPR
+ * parameters, GPU frequencies and some differences
+ * when it comes to voltage delivery to.. once again
+ * the GPU. Funnily enough, it's simpler to make it an
+ * overlay on top of 3.1 (the final one) than vice versa.
+ * The differences will show here as more and more
+ * features get enabled upstream.
+ */
+
+gpu_opp_table_3_0: gpu-opp-table-30 {
+ compatible = "operating-points-v2";
+
+ opp-624000000 {
+ opp-hz = /bits/ 64 <624000000>;
+ opp-level = <7>;
+ };
+
+ opp-560000000 {
+ opp-hz = /bits/ 64 <560000000>;
+ opp-level = <6>;
+ };
+
+ opp-510000000 {
+ opp-hz = /bits/ 64 <510000000>;
+ opp-level = <5>;
+ };
+
+ opp-401800000 {
+ opp-hz = /bits/ 64 <401800000>;
+ opp-level = <4>;
+ };
+
+ opp-315000000 {
+ opp-hz = /bits/ 64 <315000000>;
+ opp-level = <3>;
+ };
+
+ opp-214000000 {
+ opp-hz = /bits/ 64 <214000000>;
+ opp-level = <3>;
+ };
+
+ opp-133000000 {
+ opp-hz = /bits/ 64 <133000000>;
+ opp-level = <3>;
+ };
+};
+
+&gpu {
+ operating-points-v2 = <&gpu_opp_table_3_0>;
+};
chosen { };
clocks {
- xo_board: xo_board {
+ xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
clock-output-names = "xo_board";
};
- sleep_clk: sleep_clk {
+ sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32764>;
#hwlock-cells = <1>;
};
- memory {
+ memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
- reg = <0 0 0 0>;
+ reg = <0x0 0x80000000 0x0 0x0>;
};
psci {
phy-names = "hdmi_phy";
#sound-dai-cells = <1>;
+ status = "disabled";
+
ports {
#address-cells = <1>;
#size-cells = <0>;
<&gcc GCC_HDMI_CLKREF_CLK>;
clock-names = "iface",
"ref";
+
+ status = "disabled";
};
};
status = "disabled";
+ #cooling-cells = <2>;
+
gpu_opp_table: opp-table {
compatible ="operating-points-v2";
camera0_state_on:
camera_rear_default: camera-rear-default {
- mclk0 {
+ camera0_mclk: mclk0 {
pins = "gpio13";
function = "cam_mclk";
drive-strength = <16>;
bias-disable;
};
- rst {
+ camera0_rst: rst {
pins = "gpio25";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
- pwdn {
+ camera0_pwdn: pwdn {
pins = "gpio26";
function = "gpio";
drive-strength = <16>;
camera2_state_on:
camera_front_default: camera-front-default {
- mclk2 {
+ camera2_mclk: mclk2 {
pins = "gpio15";
function = "cam_mclk";
drive-strength = <16>;
bias-disable;
};
- rst {
+ camera2_rst: rst {
pins = "gpio23";
function = "gpio";
drive-strength = <16>;
power-domains = <&gcc USB30_GDSC>;
status = "disabled";
- dwc3@6a00000 {
+ usb3_dwc3: dwc3@6a00000 {
compatible = "snps,dwc3";
reg = <0x06a00000 0xcc00>;
interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
gpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
- type = "hot";
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu1_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
gpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
- type = "hot";
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu2_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
chosen { };
- memory {
+ memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
- reg = <0 0 0 0>;
+ reg = <0x0 0x80000000 0x0 0x0>;
};
reserved-memory {
* Copyright (c) 2020, Konrad Dybcio
*/
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ thermal-zones {
+ pm660 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&pm660_temp>;
+
+ trips {
+ pm660_alert0: pm660-alert0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ pm660_crit: pm660-crit {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
&spmi_bus {
};
+ pm660_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm660_adc ADC5_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm660_adc: adc@3100 {
+ compatible = "qcom,spmi-adc-rev2";
+ reg = <0x3100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ ref_gnd: ref_gnd@0 {
+ reg = <ADC5_REF_GND>;
+ qcom,decimation = <1024>;
+ qcom,pre-scaling = <1 1>;
+ };
+
+ vref_1p25: vref_1p25@1 {
+ reg = <ADC5_1P25VREF>;
+ qcom,decimation = <1024>;
+ qcom,pre-scaling = <1 1>;
+ };
+
+ die_temp: die_temp@6 {
+ reg = <ADC5_DIE_TEMP>;
+ qcom,decimation = <1024>;
+ qcom,pre-scaling = <1 1>;
+ };
+
+ xo_therm: xo_therm@4c {
+ reg = <ADC5_XO_THERM_100K_PU>;
+ qcom,pre-scaling = <1 1>;
+ qcom,decimation = <1024>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ };
+
+ msm_therm: msm_therm@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,pre-scaling = <1 1>;
+ qcom,decimation = <1024>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ };
+
+ emmc_therm: emmc_therm@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,pre-scaling = <1 1>;
+ qcom,decimation = <1024>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ };
+
+ pa_therm0: thermistor0@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,pre-scaling = <1 1>;
+ qcom,decimation = <1024>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ };
+
+ pa_therm1: thermistor1@50 {
+ reg = <ADC5_AMUX_THM4_100K_PU>;
+ qcom,pre-scaling = <1 1>;
+ qcom,decimation = <1024>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ };
+
+ quiet_therm: quiet_therm@51 {
+ reg = <ADC5_AMUX_THM5_100K_PU>;
+ qcom,pre-scaling = <1 1>;
+ qcom,decimation = <1024>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ };
+
+ vadc_vph_pwr: vph_pwr@83 {
+ reg = <ADC5_VPH_PWR>;
+ qcom,decimation = <1024>;
+ qcom,pre-scaling = <1 3>;
+ };
+
+ vcoin: vcoin@83 {
+ reg = <ADC5_VCOIN>;
+ qcom,decimation = <1024>;
+ qcom,pre-scaling = <1 3>;
+ };
+ };
+
pm660_gpios: gpios@c000 {
compatible = "qcom,pm660-gpio";
reg = <0xc000>;
#interrupt-cells = <2>;
};
};
+
+ pmic@1 {
+ compatible = "qcom,pm660", "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm660_spmi_regulators: pm660-regulators {
+ compatible = "qcom,pm660-regulators";
+ };
+ };
};
* Copyright (c) 2020, Konrad Dybcio
*/
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ thermal-zones {
+ pm660l {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&pm660l_temp>;
+
+ trips {
+ pm660l_alert0: pm660l-alert0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ pm660l_crit: pm660l-crit {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
&spmi_bus {
#address-cells = <1>;
#size-cells = <0>;
+ pm660l_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
pm660l_gpios: gpios@c000 {
compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
reg = <0x3 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm660l_wled: leds@d800 {
+ compatible = "qcom,pm660l-wled";
+ reg = <0xd800 0xd900>;
+ interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ovp";
+ label = "backlight";
+
+ qcom,switching-freq = <800>;
+ qcom,ovp-millivolt = <29600>;
+ qcom,current-boost-limit = <970>;
+ qcom,current-limit-microamp = <20000>;
+ qcom,num-strings = <2>;
+ qcom,enabled-strings = <0 1>;
+
+ status = "disabled";
+ };
+
+ pm660l_spmi_regulators: pm660l-regulators {
+ compatible = "qcom,pm660l-regulators";
+ };
};
};
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disabled";
};
pm8004_lsid5: pmic@5 {
reg = <0x5 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disabled";
pm8004_spmi_regulators: regulators {
compatible = "qcom,pm8004-regulators";
status = "disabled";
};
+ pm8150b_vbus: dcdc@1100 {
+ compatible = "qcom,pm8150b-vbus-reg";
+ status = "disabled";
+ reg = <0x1100>;
+ };
+
pm8150b_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+ /*
+ * PMI8996 is a slight modification of PMI8994 with
+ * some notable changes, like being the first PMIC
+ * whose the bootloader has to check to continue booting
+ * and a change to a LABIBB parameter.
+ */
+
+/ {
+ qcom,pmic-id = <0x20009 0x10013 0 0>;
+};
status = "okay";
};
-&tlmm {
- gpio-reserved-ranges = <0 4>;
-};
-
&uart2 {
status = "okay";
};
vdda-pll-max-microamp = <18300>;
};
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "host";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2phy_ac_en1_default>;
+};
&usb_1_hsphy {
status = "okay";
};
&usb_1_qmpphy {
+ status = "disabled";
+};
+
+&usb_2 {
status = "okay";
- vdda-phy-supply = <&vreg_l8c_1p2>;
- vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
};
-&usb_1 {
+&usb_2_dwc3 {
+ dr_mode = "host";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2phy_ac_en2_default>;
+};
+
+&usb_2_hsphy {
status = "okay";
+ vdda-pll-supply = <&vdd_usb_hs_core>;
+ vdda33-supply = <&vdda_usb_hs_3p1>;
+ vdda18-supply = <&vdda_usb_hs_1p8>;
};
-&usb_1_dwc3 {
- dr_mode = "peripheral";
+&usb_2_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l8c_1p2>;
+ vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>;
+
+ usb2phy_ac_en1_default: usb2phy_ac_en1_default {
+ mux {
+ pins = "gpio113";
+ function = "usb2phy_ac";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
+ usb2phy_ac_en2_default: usb2phy_ac_en2_default {
+ mux {
+ pins = "gpio123";
+ function = "usb2phy_ac";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
};
adau7002: audio-codec-1 {
compatible = "adi,adau7002";
IOVDD-supply = <&pp1800_l15a>;
- wakeup-delay-ms = <15>;
+ wakeup-delay-ms = <80>;
#sound-dai-cells = <0>;
};
};
};
- max98357a: audio-codec-0 {
- compatible = "maxim,max98357a";
+ max98360a: audio-codec-0 {
+ compatible = "maxim,max98360a";
pinctrl-names = "default";
pinctrl-0 = <&_en>;
sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
"Headphone Jack", "HPOL",
"Headphone Jack", "HPOR";
+ #sound-dai-cells = <0>;
#address-cells = <1>;
#size-cells = <0>;
};
sound_multimedia1_codec: codec {
- sound-dai = <&max98357a>;
+ sound-dai = <&max98360a>;
+ };
+ };
+
+ dai-link@2 {
+ link-name = "MultiMedia2";
+ reg = <2>;
+ cpu {
+ sound-dai = <&lpass_cpu 2>;
+ };
+
+ codec {
+ sound-dai = <&mdss_dp>;
};
};
};
reg = <MI2S_SECONDARY>;
qcom,playback-sd-lines = <0>;
};
+
+ hdmi-primary@0 {
+ reg = <LPASS_DP_RX>;
+ };
};
&mdp {
status = "okay";
};
+&mdss_dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hot_plug_det>;
+ data-lanes = <0 1>;
+ vdda-1p2-supply = <&vdda_usb_ss_dp_1p2>;
+ vdda-0p9-supply = <&vdda_usb_ss_dp_core>;
+};
+
&pm6150_adc {
charger-thermistor@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
no-map;
};
+ ipa_fw_mem: memory@8b700000 {
+ reg = <0 0x8b700000 0 0x10000>;
+ no-map;
+ };
+
rmtfs_mem: memory@94600000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0 0x94600000 0x0 0x200000>;
qfprom: efuse@784000 {
compatible = "qcom,sc7180-qfprom", "qcom,qfprom";
- reg = <0 0x00784000 0 0x8ff>,
+ reg = <0 0x00784000 0 0x7a0>,
<0 0x00780000 0 0x7a0>,
<0 0x00782000 0 0x100>,
<0 0x00786000 0 0x1fff>;
remote-endpoint = <&dsi0_in>;
};
};
+
+ port@2 {
+ reg = <2>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&dp_in>;
+ };
+ };
};
mdp_opp_table: mdp-opp-table {
"iface",
"bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SC7180_CX>;
status = "disabled";
};
+
+ mdss_dp: displayport-controller@ae90000 {
+ compatible = "qcom,sc7180-dp";
+ status = "disabled";
+
+ reg = <0 0x0ae90000 0 0x1400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ clock-names = "core_iface", "core_aux", "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+ #clock-cells = <1>;
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+ phys = <&dp_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SC7180_CX>;
+
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dp_out: endpoint { };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
};
dispcc: clock-controller@af00000 {
#power-domain-cells = <1>;
};
- lpass_cpu: lpass@62f00000 {
+ lpass_cpu: lpass@62d87000 {
compatible = "qcom,sc7180-lpass-cpu";
- reg = <0 0x62f00000 0 0x29000>;
- reg-names = "lpass-lpaif";
+ reg = <0 0x62d87000 0 0x68000>, <0 0x62f00000 0 0x29000>;
+ reg-names = "lpass-hdmiif", "lpass-lpaif";
iommus = <&apps_smmu 0x1020 0>,
- <&apps_smmu 0x1021 0>;
+ <&apps_smmu 0x1021 0>,
+ <&apps_smmu 0x1032 0>;
power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+ status = "disabled";
+
clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
<&lpasscc LPASS_AUDIO_CORE_CORE_CLK>,
<&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "lpass-irq-lpaif";
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "lpass-irq-lpaif", "lpass-irq-hdmi";
};
lpass_hm: clock-controller@63000000 {
/dts-v1/;
#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
-#include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h>
-#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
-#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
-#include "sc7280.dtsi"
-#include "pm7325.dtsi"
+#include "sc7280-idp.dtsi"
#include "pmr735a.dtsi"
-#include "pm8350c.dtsi"
-#include "pmk8350.dtsi"
/ {
- model = "Qualcomm Technologies, Inc. sc7280 IDP platform";
+ model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform";
compatible = "qcom,sc7280-idp", "google,senor", "qcom,sc7280";
aliases {
};
&apps_rsc {
- pm7325-regulators {
- compatible = "qcom,pm7325-rpmh-regulators";
- qcom,pmic-id = "b";
-
- vreg_s1b_1p8: smps1 {
- regulator-min-microvolt = <1856000>;
- regulator-max-microvolt = <2040000>;
- };
-
- vreg_s7b_0p9: smps7 {
- regulator-min-microvolt = <535000>;
- regulator-max-microvolt = <1120000>;
- };
-
- vreg_s8b_1p2: smps8 {
- regulator-min-microvolt = <1256000>;
- regulator-max-microvolt = <1500000>;
- };
-
- vreg_l1b_0p8: ldo1 {
- regulator-min-microvolt = <825000>;
- regulator-max-microvolt = <925000>;
- };
-
- vreg_l2b_3p0: ldo2 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3544000>;
- };
-
- vreg_l6b_1p2: ldo6 {
- regulator-min-microvolt = <1140000>;
- regulator-max-microvolt = <1260000>;
- };
-
- vreg_l7b_2p9: ldo7 {
- regulator-min-microvolt = <2960000>;
- regulator-max-microvolt = <2960000>;
- };
-
- vreg_l8b_0p9: ldo8 {
- regulator-min-microvolt = <870000>;
- regulator-max-microvolt = <970000>;
- };
-
- vreg_l9b_1p2: ldo9 {
- regulator-min-microvolt = <1080000>;
- regulator-max-microvolt = <1304000>;
- };
-
- vreg_l11b_1p7: ldo11 {
- regulator-min-microvolt = <1504000>;
- regulator-max-microvolt = <2000000>;
- };
-
- vreg_l12b_0p8: ldo12 {
- regulator-min-microvolt = <751000>;
- regulator-max-microvolt = <824000>;
- };
-
- vreg_l13b_0p8: ldo13 {
- regulator-min-microvolt = <530000>;
- regulator-max-microvolt = <824000>;
- };
-
- vreg_l14b_1p2: ldo14 {
- regulator-min-microvolt = <1080000>;
- regulator-max-microvolt = <1304000>;
- };
-
- vreg_l15b_0p8: ldo15 {
- regulator-min-microvolt = <765000>;
- regulator-max-microvolt = <1020000>;
- };
-
- vreg_l16b_1p2: ldo16 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
- };
-
- vreg_l17b_1p8: ldo17 {
- regulator-min-microvolt = <1700000>;
- regulator-max-microvolt = <1900000>;
- };
-
- vreg_l18b_1p8: ldo18 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2000000>;
- };
-
- vreg_l19b_1p8: ldo19 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- };
-
- pm8350c-regulators {
- compatible = "qcom,pm8350c-rpmh-regulators";
- qcom,pmic-id = "c";
-
- vreg_s1c_2p2: smps1 {
- regulator-min-microvolt = <2190000>;
- regulator-max-microvolt = <2210000>;
- };
-
- vreg_s9c_1p0: smps9 {
- regulator-min-microvolt = <1010000>;
- regulator-max-microvolt = <1170000>;
- };
-
- vreg_l1c_1p8: ldo1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1980000>;
- };
-
- vreg_l2c_1p8: ldo2 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <1980000>;
- };
-
- vreg_l3c_3p0: ldo3 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3540000>;
- };
-
- vreg_l4c_1p8: ldo4 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vreg_l5c_1p8: ldo5 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vreg_l6c_2p9: ldo6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- vreg_l7c_3p0: ldo7 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3544000>;
- };
-
- vreg_l8c_1p8: ldo8 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <2000000>;
- };
-
- vreg_l9c_2p9: ldo9 {
- regulator-min-microvolt = <2960000>;
- regulator-max-microvolt = <2960000>;
- };
-
- vreg_l10c_0p8: ldo10 {
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <1050000>;
- };
-
- vreg_l11c_2p8: ldo11 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3544000>;
- };
-
- vreg_l12c_1p8: ldo12 {
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <2000000>;
- };
-
- vreg_l13c_3p0: ldo13 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3544000>;
- };
-
- vreg_bob: bob {
- regulator-min-microvolt = <3008000>;
- regulator-max-microvolt = <3960000>;
- };
- };
-
pmr735a-regulators {
compatible = "qcom,pmr735a-rpmh-regulators";
qcom,pmic-id = "e";
};
};
-&pmk8350_vadc {
- pm8350_die_temp {
- reg = <PM8350_ADC7_DIE_TEMP>;
- label = "pm8350_die_temp";
- qcom,pre-scaling = <1 1>;
- };
-
- pmk8350_die_temp {
- reg = <PMK8350_ADC7_DIE_TEMP>;
- label = "pmk8350_die_temp";
- qcom,pre-scaling = <1 1>;
- };
-
- pmr735a_die_temp {
- reg = <PMR735A_ADC7_DIE_TEMP>;
- label = "pmr735a_die_temp";
- qcom,pre-scaling = <1 1>;
- };
-
- pmr735b_die_temp {
- reg = <PMR735B_ADC7_DIE_TEMP>;
- label = "pmr735b_die_temp";
- qcom,pre-scaling = <1 1>;
- };
-};
-
-&qupv3_id_0 {
- status = "okay";
-};
-
-&uart5 {
- status = "okay";
-};
-
-&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
- dr_mode = "host";
-};
-
-&usb_1_hsphy {
- status = "okay";
-
- vdda-pll-supply = <&vreg_l10c_0p8>;
- vdda33-supply = <&vreg_l2b_3p0>;
- vdda18-supply = <&vreg_l1c_1p8>;
-};
-
-&usb_1_qmpphy {
+&ipa {
status = "okay";
-
- vdda-phy-supply = <&vreg_l6b_1p2>;
- vdda-pll-supply = <&vreg_l1b_0p8>;
-};
-
-&usb_2 {
- status = "okay";
-};
-
-&usb_2_dwc3 {
- dr_mode = "peripheral";
-};
-
-&usb_2_hsphy {
- status = "okay";
-
- vdda-pll-supply = <&vreg_l10c_0p8>;
- vdda33-supply = <&vreg_l2b_3p0>;
- vdda18-supply = <&vreg_l1c_1p8>;
+ modem-init;
};
-/* PINCTRL - additions to nodes defined in sc7280.dtsi */
-
-&qup_uart5_default {
- tx {
- pins = "gpio46";
- drive-strength = <2>;
- bias-disable;
- };
-
- rx {
- pins = "gpio47";
- drive-strength = <2>;
- bias-pull-up;
+&pmk8350_vadc {
+ pmr735a_die_temp {
+ reg = <PMR735A_ADC7_DIE_TEMP>;
+ label = "pmr735a_die_temp";
+ qcom,pre-scaling = <1 1>;
};
};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 IDP board device tree source (common between SKU1 and SKU2)
+ *
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include "sc7280.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+&apps_rsc {
+ pm7325-regulators {
+ compatible = "qcom,pm7325-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vreg_s1b_1p8: smps1 {
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7b_0p9: smps7 {
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ vreg_s8b_1p2: smps8 {
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ vreg_l1b_0p8: ldo1 {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <925000>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ };
+
+ vreg_l6b_1p2: ldo6 {
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ };
+
+ vreg_l7b_2p9: ldo7 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ };
+
+ vreg_l8b_0p9: ldo8 {
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ };
+
+ vreg_l9b_1p2: ldo9 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l11b_1p7: ldo11 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_l12b_0p8: ldo12 {
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <824000>;
+ };
+
+ vreg_l13b_0p8: ldo13 {
+ regulator-min-microvolt = <530000>;
+ regulator-max-microvolt = <824000>;
+ };
+
+ vreg_l14b_1p2: ldo14 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l15b_0p8: ldo15 {
+ regulator-min-microvolt = <765000>;
+ regulator-max-microvolt = <1020000>;
+ };
+
+ vreg_l16b_1p2: ldo16 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ vreg_l17b_1p8: ldo17 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ };
+
+ vreg_l18b_1p8: ldo18 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_l19b_1p8: ldo19 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+
+ pm8350c-regulators {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_s1c_2p2: smps1 {
+ regulator-min-microvolt = <2190000>;
+ regulator-max-microvolt = <2210000>;
+ };
+
+ vreg_s9c_1p0: smps9 {
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1980000>;
+ };
+
+ vreg_l2c_1p8: ldo2 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ };
+
+ vreg_l3c_3p0: ldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3540000>;
+ };
+
+ vreg_l4c_1p8: ldo4 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vreg_l5c_1p8: ldo5 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vreg_l6c_2p9: ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3544000>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_l9c_2p9: ldo9 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ };
+
+ vreg_l10c_0p8: ldo10 {
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vreg_l11c_2p8: ldo11 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3544000>;
+ };
+
+ vreg_l12c_1p8: ldo12 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_l13c_3p0: ldo13 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ };
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ };
+ };
+};
+
+&ipa {
+ status = "okay";
+ modem-init;
+};
+
+&pmk8350_vadc {
+ pmk8350_die_temp {
+ reg = <PMK8350_ADC7_DIE_TEMP>;
+ label = "pmk8350_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+
+ non-removable;
+ no-sd;
+ no-sdio;
+
+ vmmc-supply = <&vreg_l7b_2p9>;
+ vqmmc-supply = <&vreg_l19b_1p8>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+
+ vmmc-supply = <&vreg_l9c_2p9>;
+ vqmmc-supply = <&vreg_l6c_2p9>;
+
+ cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdda-pll-supply = <&vreg_l10c_0p8>;
+ vdda33-supply = <&vreg_l2b_3p0>;
+ vdda18-supply = <&vreg_l1c_1p8>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l6b_1p2>;
+ vdda-pll-supply = <&vreg_l1b_0p8>;
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_2_hsphy {
+ status = "okay";
+
+ vdda-pll-supply = <&vreg_l10c_0p8>;
+ vdda33-supply = <&vreg_l2b_3p0>;
+ vdda18-supply = <&vreg_l1c_1p8>;
+};
+
+/* PINCTRL - additions to nodes defined in sc7280.dtsi */
+
+&qup_uart5_default {
+ tx {
+ pins = "gpio46";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio47";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&sdc1_on {
+ clk {
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ rclk {
+ bias-pull-down;
+ };
+};
+
+&sdc2_on {
+ clk {
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sd-cd {
+ bias-pull-up;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 IDP2 board device tree source
+ *
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sc7280-idp.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform";
+ compatible = "qcom,sc7280-idp2", "google,piglin", "qcom,sc7280";
+
+ aliases {
+ serial0 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
#include <dt-bindings/clock/qcom,gcc-sc7280.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,sc7280.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
chosen { };
+ aliases {
+ mmc1 = &sdhc_1;
+ mmc2 = &sdhc_2;
+ };
+
clocks {
xo_board: xo-board {
compatible = "fixed-clock";
no-map;
reg = <0x0 0x80b00000 0x0 0x100000>;
};
+
+ ipa_fw_mem: memory@8b700000 {
+ reg = <0 0x8b700000 0 0x10000>;
+ no-map;
+ };
};
cpus {
#mbox-cells = <2>;
};
+ qfprom: efuse@784000 {
+ compatible = "qcom,sc7280-qfprom", "qcom,qfprom";
+ reg = <0 0x00784000 0 0xa20>,
+ <0 0x00780000 0 0xa20>,
+ <0 0x00782000 0 0x120>,
+ <0 0x00786000 0 0x1fff>;
+ clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+ clock-names = "core";
+ power-domains = <&rpmhpd SC7280_MX>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ sdhc_1: sdhci@7c4000 {
+ compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
+ status = "disabled";
+
+ reg = <0 0x007c4000 0 0x1000>,
+ <0 0x007c5000 0 0x1000>;
+ reg-names = "hc", "cqhci";
+
+ iommus = <&apps_smmu 0xc0 0x0>;
+ interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "core", "iface", "xo";
+ interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>;
+ interconnect-names = "sdhc-ddr","cpu-sdhc";
+ power-domains = <&rpmhpd SC7280_CX>;
+ operating-points-v2 = <&sdhc1_opp_table>;
+
+ bus-width = <8>;
+ supports-cqe;
+
+ qcom,dll-config = <0x0007642c>;
+ qcom,ddr-config = <0x80040868>;
+
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+
+ sdhc1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <1800000 400000>;
+ opp-avg-kBps = <100000 0>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <5400000 1600000>;
+ opp-avg-kBps = <390000 0>;
+ };
+ };
+
+ };
+
qupv3_id_0: geniqup@9c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x009c0000 0 0x2000>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ ipa: ipa@1e40000 {
+ compatible = "qcom,sc7280-ipa";
+
+ iommus = <&apps_smmu 0x480 0x0>,
+ <&apps_smmu 0x482 0x0>;
+ reg = <0 0x1e40000 0 0x8000>,
+ <0 0x1e50000 0 0x4ad0>,
+ <0 0x1e04000 0 0x23000>;
+ reg-names = "ipa-reg",
+ "ipa-shared",
+ "gsi";
+
+ interrupts-extended = <&intc 0 654 IRQ_TYPE_EDGE_RISING>,
+ <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>,
+ <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ipa",
+ "gsi",
+ "ipa-clock-query",
+ "ipa-setup-ready";
+
+ clocks = <&rpmhcc RPMH_IPA_CLK>;
+ clock-names = "core";
+
+ interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>;
+ interconnect-names = "memory",
+ "config";
+
+ qcom,smem-states = <&ipa_smp2p_out 0>,
+ <&ipa_smp2p_out 1>;
+ qcom,smem-state-names = "ipa-clock-enabled-valid",
+ "ipa-clock-enabled";
+
+ status = "disabled";
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex", "syscon";
reg = <0 0x01f40000 0 0x40000>;
};
};
+ sdhc_2: sdhci@8804000 {
+ compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
+ status = "disabled";
+
+ reg = <0 0x08804000 0 0x1000>;
+
+ iommus = <&apps_smmu 0x100 0x0>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+ <&gcc GCC_SDCC2_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "core", "iface", "xo";
+ interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>;
+ interconnect-names = "sdhc-ddr","cpu-sdhc";
+ power-domains = <&rpmhpd SC7280_CX>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+
+ bus-width = <4>;
+
+ qcom,dll-config = <0x0007642c>;
+
+ sdhc2_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <1800000 400000>;
+ opp-avg-kBps = <100000 0>;
+ };
+
+ opp-202000000 {
+ opp-hz = /bits/ 64 <202000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <5400000 1600000>;
+ opp-avg-kBps = <200000 0>;
+ };
+ };
+
+ };
+
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sc7280-usb-hs-phy",
"qcom,usb-snps-hs-7nm-phy";
resets = <&gcc GCC_USB30_SEC_BCR>;
+ interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
usb_2_dwc3: usb@8c00000 {
compatible = "snps,dwc3";
reg = <0 0x08c00000 0 0xe000>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
+ interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB3_0 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xe000>;
pins = "gpio46", "gpio47";
function = "qup13";
};
+
+ sdc1_on: sdc1-on {
+ clk {
+ pins = "sdc1_clk";
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ };
+
+ data {
+ pins = "sdc1_data";
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ };
+ };
+
+ sdc1_off: sdc1-off {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+
+ data {
+ pins = "sdc1_data";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-bus-hold;
+ };
+ };
+
+ sdc2_on: sdc2-on {
+ clk {
+ pins = "sdc2_clk";
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ };
+
+ data {
+ pins = "sdc2_data";
+ };
+
+ sd-cd {
+ pins = "gpio91";
+ };
+ };
+
+ sdc2_off: sdc2-off {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+
+ cmd {
+ pins ="sdc2_cmd";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+
+ data {
+ pins ="sdc2_data";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+ };
};
apps_smmu: iommu@15000000 {
cpufreq_hw: cpufreq@18591000 {
compatible = "qcom,cpufreq-epss";
- reg = <0 0x18591000 0 0x1000>,
- <0 0x18592000 0 0x1000>,
- <0 0x18593000 0 0x1000>;
+ reg = <0 0x18591100 0 0x900>,
+ <0 0x18592100 0 0x900>,
+ <0 0x18593100 0 0x900>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
clock-names = "xo", "alternate";
#freq-domain-cells = <1>;
/dts-v1/;
-#include "sdm630-sony-xperia-ganges.dtsi"
+#include "sdm630.dtsi"
+#include "sdm630-sony-xperia-nile.dtsi"
/ {
model = "Sony Xperia 10";
compatible = "sony,kirin-row", "qcom,sdm630";
+
+ chosen {
+ framebuffer@9d400000 {
+ reg = <0 0x9d400000 0 (2520 * 1080 * 4)>;
+ height = <2520>;
+ };
+ };
};
+
+/* Ganges devices feature a Novatek touchscreen instead. */
+/delete-node/ &touchscreen;
+/delete-node/ &vreg_l18a_1v8;
+++ /dev/null
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2020, Martin Botka
- */
-
-/dts-v1/;
-
-/* Ganges is very similar to Nile, but
- * there are some differences that will need
- * to be addresed when more peripherals are
- * enabled upstream. Hence the separate DTSI.
- */
-#include "sdm630-sony-xperia-nile.dtsi"
-
-/ {
- chosen {
- framebuffer@9d400000 {
- reg = <0 0x9d400000 0 (2520 * 1080 * 4)>;
- height = <2520>;
- };
- };
-
- /* Yes, this is intentional.
- * Ganges devices only use gpio-keys for
- * Volume Down, but currently there's an
- * issue with it that has to be resolved.
- * Until then, let's not make the kernel panic
- */
- /delete-node/ gpio-keys;
-
- soc {
-
- i2c@c175000 {
- status = "okay";
-
- /* Novatek touchscreen */
- };
- };
-
-};
/dts-v1/;
+#include "sdm630.dtsi"
#include "sdm630-sony-xperia-nile.dtsi"
/ {
/dts-v1/;
+#include "sdm630.dtsi"
#include "sdm630-sony-xperia-nile.dtsi"
/ {
/dts-v1/;
+#include "sdm630.dtsi"
#include "sdm630-sony-xperia-nile.dtsi"
/ {
// SPDX-License-Identifier: BSD-3-Clause
/*
- * Copyright (c) 2020, Konrad Dybcio
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@somainline.org>
*/
-/dts-v1/;
-
-#include "sdm630.dtsi"
#include "pm660.dtsi"
#include "pm660l.dtsi"
#include <dt-bindings/gpio/gpio.h>
};
};
+ board_vbat: vbat-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VBAT";
+
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <4000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ cam_vdig_imx300_219_vreg: cam_vdig_imx300_219_vreg {
+ compatible = "regulator-fixed";
+ regulator-name = "cam_vdig_imx300_219_vreg";
+ startup-delay-us = <0>;
+ enable-active-high;
+ gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_vdig_default>;
+ };
+
+ cam_vana_front_vreg: cam_vana_front_vreg {
+ compatible = "regulator-fixed";
+ regulator-name = "cam_vana_front_vreg";
+ startup-delay-us = <0>;
+ enable-active-high;
+ gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&imx219_vana_default>;
+ };
+
+ cam_vana_rear_vreg: cam_vana_rear_vreg {
+ compatible = "regulator-fixed";
+ regulator-name = "cam_vana_rear_vreg";
+ startup-delay-us = <0>;
+ enable-active-high;
+ gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ pinctrl-names = "default";
+ pinctrl-0 = <&imx300_vana_default>;
+ };
+
gpio_keys {
status = "okay";
compatible = "gpio-keys";
input-name = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- autorepeat;
camera_focus {
label = "Camera Focus";
};
};
- soc {
- sdhci@c0c4000 {
- status = "okay";
+ /*
+ * Until we hook up type-c detection, we
+ * have to stick with this. But it works.
+ */
+ extcon_usb: extcon-usb {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&adsp_pil {
+ firmware-name = "adsp.mdt";
+};
+
+&blsp_i2c1 {
+ status = "okay";
+
+ touchscreen: synaptics-rmi4-i2c@70 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts-extended = <&tlmm 45 0x2008>;
- mmc-ddr-1_8v;
- /* SoMC Nile platform's eMMC doesn't support HS200 mode */
- mmc-hs400-1_8v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_active &ts_lcd_id_active>;
+
+ syna,reset-delay-ms = <200>;
+ syna,startup-delay-ms = <220>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
};
- i2c@c175000 {
- status = "okay";
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp_i2c2 {
+ status = "okay";
+
+ /* SMB1351 charger */
+};
+
+/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
+
+&blsp_i2c6 {
+ status = "okay";
+
+ /* NXP NFC */
+};
+
+&blsp1_uart2 {
+ status = "okay";
+
+ /* MSM serial console */
+};
+
+&blsp2_uart1 {
+ status = "okay";
- /* Synaptics touchscreen */
+ /* HCI Bluetooth */
+};
+
+&pon {
+ volup {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+};
+
+&qusb2phy {
+ status = "okay";
+
+ vdd-supply = <&vreg_l1b_0p925>;
+ vdda-pll-supply = <&vreg_l10a_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
+&rpm_requests {
+ pm660l-regulators {
+ compatible = "qcom,rpm-pm660l-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+
+ vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
+ vdd_l2-supply = <&vreg_bob>;
+ vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
+ vdd_l4_l6-supply = <&vreg_bob>;
+ vdd_bob-supply = <&vph_pwr>;
+
+ vreg_s1b_1p125: s1 {
+ regulator-min-microvolt = <1125000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
};
- i2c@c176000 {
- status = "okay";
+ vreg_s2b_1p05: s2 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ };
+
+ /*
+ * At least on Nile's configuration, S3B/S4B (VDD_CX) and
+ * S5B (VDD_MX) are managed only through RPM Power Domains.
+ * Trying to set a voltage on the main supply will create
+ * havoc and freeze the SoC.
+ * In any case, reference voltages for these regulators are:
+ * S3B/S4B: 0.870V
+ * S5B: 0.915V
+ */
- /* SMB1351 charger */
+ /* LDOs */
+ vreg_l1b_0p925: l1 {
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <928000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
};
- serial@c1af000 {
- status = "okay";
+ vreg_l2b_2p95: l2 {
+ /*
+ * This regulator supports 1.648 - 3.104V on this board
+ * but we set a max voltage of anything less than 2.7V
+ * to satisfy a condition in sdhci.c that will disable
+ * 3.3V SDHCI signaling, which happens to be not really
+ * supported on the Xperia Nile/Ganges platform.
+ */
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2696000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
};
- /* I2C3, 4, 5, 7 and 8 are disabled on this board. */
+ vreg_l3b_3p0: l3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-min-microamp = <200>;
+ regulator-max-microamp = <600000>;
+ regulator-system-load = <100000>;
+ regulator-allow-set-load;
+ };
- i2c@c1b6000 {
- status = "okay";
+ vreg_l4b_29p5: l4 {
+ regulator-min-microvolt = <2944000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+
+ regulator-min-microamp = <200>;
+ regulator-max-microamp = <600000>;
+ regulator-system-load = <570000>;
+ regulator-allow-set-load;
+ };
+
+ /*
+ * Downstream specifies a range of 1721-3600mV,
+ * but the only assigned consumers are SDHCI2 VMMC
+ * and Coresight QPDI that both request pinned 2.95V.
+ * Tighten the range to 1.8-3.328 (closest to 3.3) to
+ * make the mmc driver happy.
+ */
+ vreg_l5b_29p5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3328000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ regulator-system-load = <800000>;
+ };
+
+ vreg_l6b_3p3: l6 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l7b_3p125: l7 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <3128000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l8b_3p3: l8 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ /* L9B (870mV) is currently unused */
+ /* L10B (915mV) is currently unused */
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3624000>;
+ regulator-enable-ramp-delay = <500>;
+ regulator-ramp-delay = <0>;
+ };
+ };
+
+ pm660-regulators {
+ compatible = "qcom,rpm-pm660-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+
+ vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
+ vdd_l2_l3-supply = <&vreg_s2b_1p05>;
+ vdd_l5-supply = <&vreg_s2b_1p05>;
+ vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
+ vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
+
+ /*
+ * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
+ * by the Core Power Reduction hardened (CPRh) and the
+ * Operating State Manager (OSM) HW automatically.
+ */
+
+ vreg_s4a_2p04: s4 {
+ regulator-min-microvolt = <2040000>;
+ regulator-max-microvolt = <2040000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ };
+
+ vreg_s5a_1p35: s5 {
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_s6a_0p87: s6 {
+ regulator-min-microvolt = <504000>;
+ regulator-max-microvolt = <992000>;
+ regulator-enable-ramp-delay = <150>;
+ regulator-ramp-delay = <0>;
+ };
+
+ /* LDOs */
+ vreg_l1a_1p225: l1 {
+ regulator-min-microvolt = <1226000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l2a_1p0: l2 {
+ regulator-min-microvolt = <944000>;
+ regulator-max-microvolt = <1008000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l3a_1p0: l3 {
+ regulator-min-microvolt = <944000>;
+ regulator-max-microvolt = <1008000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l5a_0p848: l5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <952000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l6a_1p3: l6 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1368000>;
+ regulator-allow-set-load;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l7a_1p2: l7 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l8a_1p8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-system-load = <325000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1804000>;
+ regulator-max-microvolt = <1896000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l10a_1p8: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1944000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l11a_1p8: l11 {
+ regulator-min-microvolt = <1784000>;
+ regulator-max-microvolt = <1944000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l12a_1p8: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1944000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
- /* NXP NFC */
+ /* This gives power to the LPDDR4: never turn it off! */
+ vreg_l13a_1p8: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1944000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-boot-on;
+ regulator-always-on;
};
+
+ vreg_l14a_1p8: l14 {
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l15a_1p8: l15 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ /* L16A (2.70V) is unused */
+
+ vreg_l17a_1p8: l17 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l18a_1v8: l18 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <10>;
+ regulator-min-microamp = <200>;
+ regulator-max-microamp = <50000>;
+ regulator-system-load = <10000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l19a_3p3: l19 {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+ supports-cqe;
+
+ /* SoMC Nile platform's eMMC doesn't support HS200 mode */
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+
+ vmmc-supply = <&vreg_l4b_29p5>;
+ vqmmc-supply = <&vreg_l8a_1p8>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ vmmc-supply = <&vreg_l5b_29p5>;
+ vqmmc-supply = <&vreg_l2b_2p95>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <8 4>;
+
+ ts_int_active: ts-int-active {
+ pins = "gpio45";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ ts_lcd_id_active: ts-lcd-id-active {
+ pins = "gpio56";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ imx300_vana_default: imx300-vana-default {
+ pins = "gpio50";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
};
+
+ imx219_vana_default: imx219-vana-default {
+ pins = "gpio51";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cam_vdig_default: cam-vdig-default {
+ pins = "gpio52";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ dr_mode = "peripheral";
+ extcon = <&extcon_usb>;
};
// SPDX-License-Identifier: BSD-3-Clause
/*
- * Copyright (c) 2020, Konrad Dybcio
+ * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
*/
#include <dt-bindings/clock/qcom,gcc-sdm660.h>
+#include <dt-bindings/clock/qcom,gpucc-sdm660.h>
+#include <dt-bindings/clock/qcom,mmcc-sdm660.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,apr.h>
/ {
interrupt-parent = <&intc>;
chosen { };
clocks {
- xo_board: xo_board {
+ xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
clock-output-names = "xo_board";
};
- sleep_clk: sleep_clk {
+ sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32764>;
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
- reg = <0 0 0 0>;
+ reg = <0x0 0x80000000 0x0 0x0>;
};
pmu {
};
qhee_code: qhee-code@85800000 {
- reg = <0x0 0x85800000 0x0 0x3700000>;
+ reg = <0x0 0x85800000 0x0 0x600000>;
no-map;
};
+ rmtfs_mem: memory@85e00000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0x85e00000 0x0 0x200000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+
smem_region: smem-mem@86000000 {
reg = <0 0x86000000 0 0x200000>;
no-map;
no-map;
};
- modem_fw_mem: modem-fw-region@8ac00000 {
+ mpss_region: mpss@8ac00000 {
reg = <0x0 0x8ac00000 0x0 0x7e00000>;
no-map;
};
- adsp_fw_mem: adsp-fw-region@92a00000 {
+ adsp_region: adsp@92a00000 {
reg = <0x0 0x92a00000 0x0 0x1e00000>;
no-map;
};
- pil_mba_mem: pil-mba-region@94800000 {
+ mba_region: mba@94800000 {
reg = <0x0 0x94800000 0x0 0x200000>;
no-map;
};
- buffer_mem: buffer-region@94a00000 {
+ buffer_mem: tzbuffer@94a00000 {
reg = <0x0 0x94a00000 0x0 0x100000>;
no-map;
};
- venus_fw_mem: venus-fw-region@9f800000 {
+ venus_region: venus@9f800000 {
reg = <0x0 0x9f800000 0x0 0x800000>;
no-map;
};
- secure_region2: secure-region2@f7c00000 {
- reg = <0x0 0xf7c00000 0x0 0x5c00000>;
- no-map;
- };
-
adsp_mem: adsp-region@f6000000 {
reg = <0x0 0xf6000000 0x0 0x800000>;
no-map;
};
- qseecom_ta_mem: qseecom-ta-region@fec00000 {
- reg = <0x0 0xfec00000 0x0 0x1000000>;
- no-map;
- };
-
qseecom_mem: qseecom-region@f6800000 {
reg = <0x0 0xf6800000 0x0 0x1400000>;
no-map;
};
- secure_display_memory: secure-region@f5c00000 {
- reg = <0x0 0xf5c00000 0x0 0x5c00000>;
- no-map;
- };
-
- cont_splash_mem: cont-splash-region@9d400000 {
- reg = <0x0 0x9d400000 0x0 0x23ff000>;
+ zap_shader_region: gpu@fed00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0xfed00000 0x0 0xa00000>;
no-map;
};
};
compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
#clock-cells = <1>;
};
+
+ rpmpd: power-controller {
+ compatible = "qcom,sdm660-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+ };
+ };
};
};
hwlocks = <&tcsr_mutex 3>;
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 10>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 14>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x00780000 0x621c>;
#address-cells = <1>;
#size-cells = <1>;
+
+ qusb2_hstx_trim: hstx-trim@240 {
+ reg = <0x240 0x1>;
+ bits = <25 3>;
+ };
+
+ gpu_speed_bin: gpu-speed-bin@41a0 {
+ reg = <0x41a0 0x1>;
+ bits = <21 7>;
+ };
};
rng: rng@793000 {
clock-names = "core";
};
+ bimc: interconnect@1008000 {
+ compatible = "qcom,sdm660-bimc";
+ reg = <0x01008000 0x78000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
restart@10ac000 {
compatible = "qcom,pshold";
reg = <0x010ac000 0x4>;
};
+ cnoc: interconnect@1500000 {
+ compatible = "qcom,sdm660-cnoc";
+ reg = <0x01500000 0x10000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+ <&rpmcc RPM_SMD_CNOC_A_CLK>;
+ };
+
+ snoc: interconnect@1626000 {
+ compatible = "qcom,sdm660-snoc";
+ reg = <0x01626000 0x7090>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
anoc2_smmu: iommu@16c0000 {
compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
reg = <0x016c0000 0x40000>;
- #iommu-cells = <1>;
+ assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+ assigned-clock-rates = <1000>;
+ clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+ clock-names = "bus";
#global-interrupts = <2>;
+ #iommu-cells = <1>;
+
interrupts =
<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
status = "disabled";
};
+ a2noc: interconnect@1704000 {
+ compatible = "qcom,sdm660-a2noc";
+ reg = <0x01704000 0xc100>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+ <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>;
+ };
+
+ mnoc: interconnect@1745000 {
+ compatible = "qcom,sdm660-mnoc";
+ reg = <0x01745000 0xA010>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a", "iface";
+ clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
+ <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
+ <&mmcc AHB_CLK_SRC>;
+ };
+
+ tsens: thermal-sensor@10ae000 {
+ compatible = "qcom,sdm630-tsens", "qcom,tsens-v2";
+ reg = <0x010ae000 0x1000>, /* TM */
+ <0x010ad000 0x1000>; /* SROT */
+ #qcom,sensors = <12>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
tcsr_mutex_regs: syscon@1f40000 {
compatible = "syscon";
- reg = <0x01f40000 0x20000>;
+ reg = <0x01f40000 0x40000>;
};
- tlmm: pinctrl@3000000 {
+ tlmm: pinctrl@3100000 {
compatible = "qcom,sdm630-pinctrl";
- reg = <0x03000000 0xc00000>;
+ reg = <0x03100000 0x400000>,
+ <0x03500000 0x400000>,
+ <0x03900000 0x400000>;
+ reg-names = "south", "center", "north";
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
- #gpio-cells = <0x2>;
+ gpio-ranges = <&tlmm 0 0 114>;
+ #gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <0x2>;
+ #interrupt-cells = <2>;
blsp1_uart1_default: blsp1-uart1-default {
pins = "gpio0", "gpio1", "gpio2", "gpio3";
bias-disable;
};
- blsp2_uart1_tx_active: blsp2-uart1-tx-active {
- pins = "gpio16";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp2_uart1_tx_sleep: blsp2-uart1-tx-sleep {
- pins = "gpio16";
- drive-strength = <2>;
- bias-pull-up;
- };
+ blsp2_uart1_default: blsp2-uart1-active {
+ tx-rts {
+ pins = "gpio16", "gpio19";
+ function = "blsp_uart5";
+ drive-strength = <2>;
+ bias-disable;
+ };
- blsp2_uart1_rxcts_active: blsp2-uart1-rxcts-active {
- pins = "gpio17", "gpio18";
- drive-strength = <2>;
- bias-disable;
- };
+ rx {
+ /*
+ * Avoid garbage data while BT module
+ * is powered off or not driving signal
+ */
+ pins = "gpio17";
+ function = "blsp_uart5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- blsp2_uart1_rxcts_sleep: blsp2-uart1-rxcts-sleep {
- pins = "gpio17", "gpio18";
- drive-strength = <2>;
- bias-no-pull;
+ cts {
+ /* Match the pull of the BT module */
+ pins = "gpio18";
+ function = "blsp_uart5";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
};
- blsp2_uart1_rfr_active: blsp2-uart1-rfr-active {
- pins = "gpio19";
- drive-strength = <2>;
- bias-disable;
- };
+ blsp2_uart1_sleep: blsp2-uart1-sleep {
+ tx {
+ pins = "gpio16";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- blsp2_uart1_rfr_sleep: blsp2-uart1-rfr-sleep {
- pins = "gpio19";
- drive-strength = <2>;
- bias-no-pull;
+ rx-cts-rts {
+ pins = "gpio17", "gpio18", "gpio19";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-no-pull;
+ };
};
i2c1_default: i2c1-default {
pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
i2c1_sleep: i2c1-sleep {
pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
drive-strength = <2>;
bias-pull-up;
};
i2c2_default: i2c2-default {
pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
i2c2_sleep: i2c2-sleep {
pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
drive-strength = <2>;
bias-pull-up;
};
i2c3_default: i2c3-default {
pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
i2c3_sleep: i2c3-sleep {
pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
drive-strength = <2>;
bias-pull-up;
};
i2c4_default: i2c4-default {
pins = "gpio14", "gpio15";
+ function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
i2c4_sleep: i2c4-sleep {
pins = "gpio14", "gpio15";
+ function = "blsp_i2c4";
drive-strength = <2>;
bias-pull-up;
};
i2c5_default: i2c5-default {
pins = "gpio18", "gpio19";
+ function = "blsp_i2c5";
drive-strength = <2>;
bias-disable;
};
i2c5_sleep: i2c5-sleep {
pins = "gpio18", "gpio19";
+ function = "blsp_i2c5";
drive-strength = <2>;
bias-pull-up;
};
i2c6_default: i2c6-default {
pins = "gpio22", "gpio23";
+ function = "blsp_i2c6";
drive-strength = <2>;
bias-disable;
};
i2c6_sleep: i2c6-sleep {
pins = "gpio22", "gpio23";
+ function = "blsp_i2c6";
drive-strength = <2>;
bias-pull-up;
};
i2c7_default: i2c7-default {
pins = "gpio26", "gpio27";
+ function = "blsp_i2c7";
drive-strength = <2>;
bias-disable;
};
i2c7_sleep: i2c7-sleep {
pins = "gpio26", "gpio27";
+ function = "blsp_i2c7";
drive-strength = <2>;
bias-pull-up;
};
i2c8_default: i2c8-default {
pins = "gpio30", "gpio31";
+ function = "blsp_i2c8";
drive-strength = <2>;
bias-disable;
};
i2c8_sleep: i2c8-sleep {
pins = "gpio30", "gpio31";
+ function = "blsp_i2c8";
drive-strength = <2>;
bias-pull-up;
};
- sdc1_clk_on: sdc1-clk-on {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <16>;
- };
+ cci0_default: cci0_default {
+ pinmux {
+ pins = "gpio36","gpio37";
+ function = "cci_i2c";
+ };
- sdc1_clk_off: sdc1-clk-off {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <2>;
+ pinconf {
+ pins = "gpio36","gpio37";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
};
- sdc1_cmd_on: sdc1-cmd-on {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <10>;
+ cci1_default: cci1_default {
+ pinmux {
+ pins = "gpio38","gpio39";
+ function = "cci_i2c";
+ };
+
+ pinconf {
+ pins = "gpio38","gpio39";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
};
- sdc1_cmd_off: sdc1-cmd-off {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <2>;
+ sdc1_state_on: sdc1-on {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
};
- sdc1_data_on: sdc1-data-on {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <8>;
+ sdc1_state_off: sdc1-off {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
};
- sdc1_data_off: sdc1-data-off {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <2>;
+ sdc2_state_on: sdc2-on {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sd-cd {
+ pins = "gpio54";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
};
- sdc1_rclk_on: sdc1-rclk-on {
- pins = "sdc1_rclk";
- bias-pull-down;
+ sdc2_state_off: sdc2-off {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sd-cd {
+ pins = "gpio54";
+ bias-disable;
+ drive-strength = <2>;
+ };
};
+ };
+
+ adreno_gpu: gpu@5000000 {
+ compatible = "qcom,adreno-508.0", "qcom,adreno";
+ #stream-id-cells = <16>;
+
+ reg = <0x05000000 0x40000>;
+ reg-names = "kgsl_3d0_reg_memory";
- sdc1_rclk_off: sdc1-rclk-off {
- pins = "sdc1_rclk";
- bias-pull-down;
+ interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+ <&gpucc GPUCC_RBBMTIMER_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_GPU_BIMC_GFX_CLK>,
+ <&gpucc GPUCC_RBCPR_CLK>,
+ <&gpucc GPUCC_GFX3D_CLK>;
+
+ clock-names = "iface",
+ "rbbmtimer",
+ "mem",
+ "mem_iface",
+ "rbcpr",
+ "core";
+
+ power-domains = <&rpmpd SDM660_VDDMX>;
+ iommus = <&kgsl_smmu 0>;
+
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
+
+ interconnects = <&gnoc 1 &bimc 5>;
+ interconnect-names = "gfx-mem";
+
+ operating-points-v2 = <&gpu_sdm630_opp_table>;
+
+ gpu_sdm630_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-775000000 {
+ opp-hz = /bits/ 64 <775000000>;
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ opp-peak-kBps = <5412000>;
+ opp-supported-hw = <0xA2>;
+ };
+ opp-647000000 {
+ opp-hz = /bits/ 64 <647000000>;
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ opp-peak-kBps = <4068000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-588000000 {
+ opp-hz = /bits/ 64 <588000000>;
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ opp-peak-kBps = <3072000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-465000000 {
+ opp-hz = /bits/ 64 <465000000>;
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ opp-peak-kBps = <2724000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-370000000 {
+ opp-hz = /bits/ 64 <370000000>;
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ opp-peak-kBps = <2188000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-240000000 {
+ opp-hz = /bits/ 64 <240000000>;
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ opp-peak-kBps = <1648000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ opp-peak-kBps = <1200000>;
+ opp-supported-hw = <0xFF>;
+ };
};
};
kgsl_smmu: iommu@5040000 {
- compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+ compatible = "qcom,sdm630-smmu-v2",
+ "qcom,adreno-smmu", "qcom,smmu-v2";
reg = <0x05040000 0x10000>;
- #iommu-cells = <1>;
+ /*
+ * GX GDSC parent is CX. We need to bring up CX for SMMU
+ * but we need both up for Adreno. On the other hand, we
+ * need to manage the GX rpmpd domain in the adreno driver.
+ * Enable CX/GX GDSCs here so that we can manage just the GX
+ * RPM Power Domain in the Adreno driver.
+ */
+ power-domains = <&gpucc GPU_GX_GDSC>;
+ clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_GPU_BIMC_GFX_CLK>;
+ clock-names = "iface", "mem", "mem_iface";
#global-interrupts = <2>;
+ #iommu-cells = <1>;
+
interrupts =
<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
status = "disabled";
};
+ gpucc: clock-controller@5065000 {
+ compatible = "qcom,gpucc-sdm630";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x05065000 0x9038>;
+
+ clocks = <&xo_board>,
+ <&gcc GCC_GPU_GPLL0_CLK>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK>;
+ clock-names = "xo",
+ "gcc_gpu_gpll0_clk",
+ "gcc_gpu_gpll0_div_clk";
+ status = "disabled";
+ };
+
lpass_smmu: iommu@5100000 {
compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
reg = <0x05100000 0x40000>;
cell-index = <0>;
};
+ usb3: usb@a8f8800 {
+ compatible = "qcom,sdm660-dwc3", "qcom,dwc3";
+ reg = <0x0a8f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+ <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "bus",
+ "mock_utmi", "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+ assigned-clock-rates = <19200000>, <120000000>,
+ <19200000>;
+
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+ power-domains = <&gcc USB_30_GDSC>;
+ qcom,select-utmi-as-pipe-clk;
+
+ resets = <&gcc GCC_USB_30_BCR>;
+
+ usb3_dwc3: usb@a800000 {
+ compatible = "snps,dwc3";
+ reg = <0x0a800000 0xc8d0>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+
+ /*
+ * SDM630 technically supports USB3 but I
+ * haven't seen any devices making use of it.
+ */
+ maximum-speed = "high-speed";
+ phys = <&qusb2phy>;
+ phy-names = "usb2-phy";
+ snps,hird-threshold = /bits/ 8 <0>;
+ };
+ };
+
+ qusb2phy: phy@c012000 {
+ compatible = "qcom,sdm660-qusb2-phy";
+ reg = <0x0c012000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ nvmem-cells = <&qusb2_hstx_trim>;
+ status = "disabled";
+ };
+
+ sdhc_2: sdhci@c084000 {
+ compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x0c084000 0x1000>;
+ reg-names = "hc";
+
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ bus-width = <4>;
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+ <&gcc GCC_SDCC2_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+
+ interconnects = <&a2noc 3 &a2noc 10>,
+ <&gnoc 0 &cnoc 28>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_state_on>;
+ pinctrl-1 = <&sdc2_state_off>;
+ power-domains = <&rpmpd SDM660_VDDCX>;
+
+ status = "disabled";
+
+ sdhc2_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ opp-peak-kBps = <200000 140000>;
+ opp-avg-kBps = <130718 133320>;
+ };
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ opp-peak-kBps = <250000 160000>;
+ opp-avg-kBps = <196078 150000>;
+ };
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ opp-peak-kBps = <4096000 4096000>;
+ opp-avg-kBps = <1338562 1338562>;
+ };
+ };
+ };
+
sdhc_1: sdhci@c0c4000 {
compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
reg = <0x0c0c4000 0x1000>,
<&gcc GCC_SDCC1_ICE_CORE_CLK>;
clock-names = "core", "iface", "xo", "ice";
+ interconnects = <&a2noc 2 &a2noc 10>,
+ <&gnoc 0 &cnoc 27>;
+ interconnect-names = "sdhc1-ddr", "cpu-sdhc1";
+ operating-points-v2 = <&sdhc1_opp_table>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+ pinctrl-0 = <&sdc1_state_on>;
+ pinctrl-1 = <&sdc1_state_off>;
+ power-domains = <&rpmpd SDM660_VDDCX>;
bus-width = <8>;
non-removable;
status = "disabled";
+
+ sdhc1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ opp-peak-kBps = <200000 140000>;
+ opp-avg-kBps = <130718 133320>;
+ };
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ opp-peak-kBps = <250000 160000>;
+ opp-avg-kBps = <196078 150000>;
+ };
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ opp-peak-kBps = <4096000 4096000>;
+ opp-avg-kBps = <1338562 1338562>;
+ };
+ };
+ };
+
+ mmcc: clock-controller@c8c0000 {
+ compatible = "qcom,mmcc-sdm630";
+ reg = <0x0c8c0000 0x40000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clock-names = "xo",
+ "sleep_clk",
+ "gpll0",
+ "gpll0_div",
+ "dsi0pll",
+ "dsi0pllbyte",
+ "dsi1pll",
+ "dsi1pllbyte",
+ "dp_link_2x_clk_divsel_five",
+ "dp_vco_divided_clk_src_mux";
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&sleep_clk>,
+ <&gcc GCC_MMSS_GPLL0_CLK>,
+ <&gcc GCC_MMSS_GPLL0_DIV_CLK>,
+ <&dsi0_phy 1>,
+ <&dsi0_phy 0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ };
+
+ dsi_opp_table: dsi-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-131250000 {
+ opp-hz = /bits/ 64 <131250000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-210000000 {
+ opp-hz = /bits/ 64 <210000000>;
+ required-opps = <&rpmpd_opp_svs_plus>;
+ };
+
+ opp-262500000 {
+ opp-hz = /bits/ 64 <262500000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ };
+
+ mdss: mdss@c900000 {
+ compatible = "qcom,mdss";
+ reg = <0x0c900000 0x1000>,
+ <0x0c9b0000 0x1040>;
+ reg-names = "mdss_phys", "vbif_phys";
+
+ power-domains = <&mmcc MDSS_GDSC>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>,
+ <&mmcc MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "bus",
+ "vsync",
+ "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ mdp: mdp@c901000 {
+ compatible = "qcom,mdp5";
+ reg = <0x0c901000 0x89000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ assigned-clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <300000000>,
+ <19200000>;
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
+
+ interconnects = <&mnoc 2 &bimc 5>,
+ <&mnoc 3 &bimc 5>,
+ <&gnoc 0 &mnoc 17>;
+ interconnect-names = "mdp0-mem",
+ "mdp1-mem",
+ "rotator-mem";
+ iommus = <&mmss_smmu 0>;
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd SDM660_VDDCX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp5_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: mdp-opp {
+ compatible = "operating-points-v2";
+
+ opp-150000000 {
+ opp-hz = /bits/ 64 <150000000>;
+ opp-peak-kBps = <320000 320000 76800>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+ opp-275000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ opp-peak-kBps = <6400000 6400000 160000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-peak-kBps = <6400000 6400000 190000>;
+ required-opps = <&rpmpd_opp_svs_plus>;
+ };
+ opp-330000000 {
+ opp-hz = /bits/ 64 <330000000>;
+ opp-peak-kBps = <6400000 6400000 240000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ opp-412500000 {
+ opp-hz = /bits/ 64 <412500000>;
+ opp-peak-kBps = <6400000 6400000 320000>;
+ required-opps = <&rpmpd_opp_turbo>;
+ };
+ };
+ };
+
+ dsi0: dsi@c994000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0c994000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd SDM660_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+ assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+ <&mmcc PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>,
+ <&dsi0_phy 1>;
+
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_BYTE0_INTF_CLK>,
+ <&mmcc MNOC_AHB_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MISC_AHB_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>;
+ clock-names = "mdp_core",
+ "byte",
+ "byte_intf",
+ "mnoc",
+ "iface",
+ "bus",
+ "core_mmss",
+ "pixel",
+ "core";
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&mdp5_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: dsi-phy@c994400 {
+ compatible = "qcom,dsi-phy-14nm-660";
+ reg = <0x0c994400 0x100>,
+ <0x0c994500 0x300>,
+ <0x0c994800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+ clock-names = "iface", "ref";
+ };
};
blsp1_dma: dma-controller@c144000 {
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
+ dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c1_default>;
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
+ dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c2_default>;
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
+ dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c3_default>;
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
+ dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c4_default>;
dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart1_tx_active &blsp2_uart1_rxcts_active
- &blsp2_uart1_rfr_active>;
- pinctrl-1 = <&blsp2_uart1_tx_sleep &blsp2_uart1_rxcts_sleep
- &blsp2_uart1_rfr_sleep>;
+ pinctrl-0 = <&blsp2_uart1_default>;
+ pinctrl-1 = <&blsp2_uart1_sleep>;
status = "disabled";
};
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
+ dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c5_default>;
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
+ dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c6_default>;
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
+ dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c7_default>;
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
+ dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c8_default>;
status = "disabled";
};
+ imem@146bf000 {
+ compatible = "simple-mfd";
+ reg = <0x146bf000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0 0x146bf000 0x1000>;
+
+ pil-reloc@94c {
+ compatible = "qcom,pil-reloc-info";
+ reg = <0x94c 0xc8>;
+ };
+ };
+
+ camss: camss@ca00000 {
+ compatible = "qcom,sdm660-camss";
+ reg = <0x0c824000 0x1000>,
+ <0x0ca00120 0x4>,
+ <0x0c825000 0x1000>,
+ <0x0ca00124 0x4>,
+ <0x0c826000 0x1000>,
+ <0x0ca00128 0x4>,
+ <0x0ca30000 0x100>,
+ <0x0ca30400 0x100>,
+ <0x0ca30800 0x100>,
+ <0x0ca30c00 0x100>,
+ <0x0ca31000 0x500>,
+ <0x0ca00020 0x10>,
+ <0x0ca10000 0x1000>,
+ <0x0ca14000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csiphy2",
+ "csiphy2_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0",
+ "vfe1";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "vfe0",
+ "vfe1";
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc THROTTLE_CAMSS_AXI_CLK>,
+ <&mmcc CAMSS_ISPIF_AHB_CLK>,
+ <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI0_AHB_CLK>,
+ <&mmcc CAMSS_CSI0_CLK>,
+ <&mmcc CAMSS_CPHY_CSID0_CLK>,
+ <&mmcc CAMSS_CSI0PIX_CLK>,
+ <&mmcc CAMSS_CSI0RDI_CLK>,
+ <&mmcc CAMSS_CSI1_AHB_CLK>,
+ <&mmcc CAMSS_CSI1_CLK>,
+ <&mmcc CAMSS_CPHY_CSID1_CLK>,
+ <&mmcc CAMSS_CSI1PIX_CLK>,
+ <&mmcc CAMSS_CSI1RDI_CLK>,
+ <&mmcc CAMSS_CSI2_AHB_CLK>,
+ <&mmcc CAMSS_CSI2_CLK>,
+ <&mmcc CAMSS_CPHY_CSID2_CLK>,
+ <&mmcc CAMSS_CSI2PIX_CLK>,
+ <&mmcc CAMSS_CSI2RDI_CLK>,
+ <&mmcc CAMSS_CSI3_AHB_CLK>,
+ <&mmcc CAMSS_CSI3_CLK>,
+ <&mmcc CAMSS_CPHY_CSID3_CLK>,
+ <&mmcc CAMSS_CSI3PIX_CLK>,
+ <&mmcc CAMSS_CSI3RDI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_CLK>,
+ <&mmcc CAMSS_CSI_VFE0_CLK>,
+ <&mmcc CAMSS_VFE0_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_STREAM_CLK>,
+ <&mmcc CAMSS_VFE1_CLK>,
+ <&mmcc CAMSS_CSI_VFE1_CLK>,
+ <&mmcc CAMSS_VFE1_AHB_CLK>,
+ <&mmcc CAMSS_VFE1_STREAM_CLK>,
+ <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
+ <&mmcc CAMSS_VFE_VBIF_AXI_CLK>,
+ <&mmcc CSIPHY_AHB2CRIF_CLK>,
+ <&mmcc CAMSS_CPHY_CSID0_CLK>,
+ <&mmcc CAMSS_CPHY_CSID1_CLK>,
+ <&mmcc CAMSS_CPHY_CSID2_CLK>,
+ <&mmcc CAMSS_CPHY_CSID3_CLK>;
+ clock-names = "top_ahb",
+ "throttle_axi",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi3_ahb",
+ "csi3",
+ "csi3_phy",
+ "csi3_pix",
+ "csi3_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe0_ahb",
+ "vfe0_stream",
+ "vfe1",
+ "csi_vfe1",
+ "vfe1_ahb",
+ "vfe1_stream",
+ "vfe_ahb",
+ "vfe_axi",
+ "csiphy_ahb2crif",
+ "cphy_csid0",
+ "cphy_csid1",
+ "cphy_csid2",
+ "cphy_csid3";
+ interconnects = <&mnoc 5 &bimc 5>;
+ interconnect-names = "vfe-mem";
+ iommus = <&mmss_smmu 0xc00>,
+ <&mmss_smmu 0xc01>,
+ <&mmss_smmu 0xc02>,
+ <&mmss_smmu 0xc03>;
+ power-domains = <&mmcc CAMSS_VFE0_GDSC>,
+ <&mmcc CAMSS_VFE1_GDSC>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci: cci@ca0c000 {
+ compatible = "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0ca0c000 0x1000>;
+ interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+
+ assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CLK>;
+ assigned-clock-rates = <80800000>, <37500000>;
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_CCI_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>;
+ clock-names = "camss_top_ahb",
+ "cci_ahb",
+ "cci",
+ "camss_ahb";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cci0_default &cci1_default>;
+ power-domains = <&mmcc CAMSS_TOP_GDSC>;
+ status = "disabled";
+
+ cci_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
mmss_smmu: iommu@cd00000 {
compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
reg = <0x0cd00000 0x40000>;
- #iommu-cells = <1>;
+ clocks = <&mmcc MNOC_AHB_CLK>,
+ <&mmcc BIMC_SMMU_AHB_CLK>,
+ <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
+ <&mmcc BIMC_SMMU_AXI_CLK>;
+ clock-names = "iface-mm", "iface-smmu",
+ "bus-mm", "bus-smmu";
#global-interrupts = <2>;
+ #iommu-cells = <1>;
+
interrupts =
<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
status = "disabled";
};
+ adsp_pil: remoteproc@15700000 {
+ compatible = "qcom,sdm660-adsp-pas";
+ reg = <0x15700000 0x4040>;
+
+ interrupts-extended =
+ <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_region>;
+ power-domains = <&rpmpd SDM660_VDDCX>;
+ power-domain-names = "cx";
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ glink-edge {
+ interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+
+ label = "lpass";
+ mboxes = <&apcs_glb 9>;
+ qcom,remote-pid = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ apr {
+ compatible = "qcom,apr-v2";
+ qcom,glink-channels = "apr_audio_svc";
+ qcom,apr-domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6core {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ };
+
+ q6afe: apr-service@4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+ };
+
+ q6asm: apr-service@7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ iommus = <&lpass_smmu 1>;
+ };
+ };
+
+ q6adm: apr-service@8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+ };
+ };
+
+ gnoc: interconnect@17900000 {
+ compatible = "qcom,sdm660-gnoc";
+ reg = <0x17900000 0xe000>;
+ #interconnect-cells = <1>;
+ /*
+ * This one apparently features no clocks,
+ * so let's not mess with the driver needlessly
+ */
+ clock-names = "bus", "bus_a";
+ clocks = <&xo_board>, <&xo_board>;
+ };
+
apcs_glb: mailbox@17911000 {
compatible = "qcom,sdm660-apcs-hmss-global";
reg = <0x17911000 0x1000>;
#hwlock-cells = <1>;
};
+ sound: sound {
+ };
+
+ thermal-zones {
+ aoss-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 0>;
+
+ trips {
+ aoss_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cpuss0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ cpuss0_alert0: trip-point0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cpuss1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ cpuss1_alert0: trip-point0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ cpu0_alert0: trip-point0 {
+ temperature = <70000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ cpu0_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ cpu1_alert0: trip-point0 {
+ temperature = <70000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ cpu1_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu2_alert0: trip-point0 {
+ temperature = <70000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ cpu2_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 6>;
+
+ trips {
+ cpu3_alert0: trip-point0 {
+ temperature = <70000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ cpu3_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ /*
+ * According to what downstream DTS says,
+ * the entire power efficient cluster has
+ * only a single thermal sensor.
+ */
+
+ pwr-cluster-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 7>;
+
+ trips {
+ pwr_cluster_alert0: trip-point0 {
+ temperature = <70000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ pwr_cluster_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 8>;
+
+ trips {
+ gpu_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 1 0xf08>,
/dts-v1/;
-/* Mermaid uses sdm636, but it's different ever so slightly
- * that we can ignore it for the time being. Sony also commonizes
- * the Ganges platform as a whole in downstream kernels.
- */
-#include "sdm630-sony-xperia-ganges.dtsi"
+#include "sdm630-sony-xperia-ganges-kirin.dts"
+#include "sdm636.dtsi"
/ {
model = "Sony Xperia 10 Plus";
compatible = "sony,mermaid-row", "qcom,sdm636";
+ /* SDM636 v1 */
qcom,msm-id = <345 0>;
qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00 0x1001b 0x102001a 0x00 0x00>;
};
+
+&sdc2_state_on {
+ pinconf-clk {
+ drive-strength = <14>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
+ * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
+ * Copyright (c) 2020, Martin Botka <martin.botka1@gmail.com>
+ */
+
+#include "sdm660.dtsi"
+
+/*
+ * According to the downstream DTS,
+ * 636 is basically a 660 except for
+ * different CPU frequencies, Adreno
+ * 509 instead of 512 and lack of
+ * turing IP. These differences will
+ * be addressed when the aforementioned
+ * peripherals will be enabled upstream.
+ */
+
+&adreno_gpu {
+ compatible = "qcom,adreno-509.0", "qcom,adreno";
+ /* Adreno 509 shares the frequency table with 512 */
+};
&blsp1_uart2 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart_console_active>;
};
&tlmm {
/*
* Copyright (c) 2018, Craig Tatlor.
* Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
+ * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
+ * Copyright (c) 2020, Martin Botka <martin.botka1@gmail.com>
*/
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-sdm660.h>
+#include "sdm630.dtsi"
-/ {
- interrupt-parent = <&intc>;
+&adreno_gpu {
+ compatible = "qcom,adreno-512.0", "qcom,adreno";
+ operating-points-v2 = <&gpu_sdm660_opp_table>;
- #address-cells = <2>;
- #size-cells = <2>;
+ gpu_sdm660_opp_table: opp-table {
+ compatible = "operating-points-v2";
- chosen { };
+ /*
+ * 775MHz is only available on the highest speed bin
+ * Though it cannot be used for now due to interconnect
+ * framework not supporting multiple frequencies
+ * at the same opp-level
- clocks {
- xo_board: xo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- clock-output-names = "xo_board";
+ opp-750000000 {
+ opp-hz = /bits/ 64 <750000000>;
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ opp-peak-kBps = <5412000>;
+ opp-supported-hw = <0xCHECKME>;
};
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32764>;
- clock-output-names = "sleep_clk";
- };
- };
+ * These OPPs are correct, but we are lacking support for the
+ * GPU regulator. Hence, disable them for now to prevent the
+ * platform from hanging on high graphics loads.
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- CPU0: cpu@100 {
- device_type = "cpu";
- compatible = "qcom,kryo260";
- reg = <0x0 0x100>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- };
- L1_I_100: l1-icache {
- compatible = "cache";
- };
- L1_D_100: l1-dcache {
- compatible = "cache";
- };
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ opp-peak-kBps = <5184000>;
+ opp-supported-hw = <0xFF>;
};
- CPU1: cpu@101 {
- device_type = "cpu";
- compatible = "qcom,kryo260";
- reg = <0x0 0x101>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- next-level-cache = <&L2_1>;
- L1_I_101: l1-icache {
- compatible = "cache";
- };
- L1_D_101: l1-dcache {
- compatible = "cache";
- };
+ opp-647000000 {
+ opp-hz = /bits/ 64 <647000000>;
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ opp-peak-kBps = <4068000>;
+ opp-supported-hw = <0xFF>;
};
- CPU2: cpu@102 {
- device_type = "cpu";
- compatible = "qcom,kryo260";
- reg = <0x0 0x102>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- next-level-cache = <&L2_1>;
- L1_I_102: l1-icache {
- compatible = "cache";
- };
- L1_D_102: l1-dcache {
- compatible = "cache";
- };
+ opp-588000000 {
+ opp-hz = /bits/ 64 <588000000>;
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ opp-peak-kBps = <3072000>;
+ opp-supported-hw = <0xFF>;
};
- CPU3: cpu@103 {
- device_type = "cpu";
- compatible = "qcom,kryo260";
- reg = <0x0 0x103>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- next-level-cache = <&L2_1>;
- L1_I_103: l1-icache {
- compatible = "cache";
- };
- L1_D_103: l1-dcache {
- compatible = "cache";
- };
+ opp-465000000 {
+ opp-hz = /bits/ 64 <465000000>;
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ opp-peak-kBps = <2724000>;
+ opp-supported-hw = <0xFF>;
};
- CPU4: cpu@0 {
- device_type = "cpu";
- compatible = "qcom,kryo260";
- reg = <0x0 0x0>;
- enable-method = "psci";
- capacity-dmips-mhz = <640>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- };
- L1_I_0: l1-icache {
- compatible = "cache";
- };
- L1_D_0: l1-dcache {
- compatible = "cache";
- };
+ opp-370000000 {
+ opp-hz = /bits/ 64 <370000000>;
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ opp-peak-kBps = <2188000>;
+ opp-supported-hw = <0xFF>;
};
+ */
- CPU5: cpu@1 {
- device_type = "cpu";
- compatible = "qcom,kryo260";
- reg = <0x0 0x1>;
- enable-method = "psci";
- capacity-dmips-mhz = <640>;
- next-level-cache = <&L2_0>;
- L1_I_1: l1-icache {
- compatible = "cache";
- };
- L1_D_1: l1-dcache {
- compatible = "cache";
- };
+ opp-266000000 {
+ opp-hz = /bits/ 64 <266000000>;
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ opp-peak-kBps = <1648000>;
+ opp-supported-hw = <0xFF>;
};
- CPU6: cpu@2 {
- device_type = "cpu";
- compatible = "qcom,kryo260";
- reg = <0x0 0x2>;
- enable-method = "psci";
- capacity-dmips-mhz = <640>;
- next-level-cache = <&L2_0>;
- L1_I_2: l1-icache {
- compatible = "cache";
- };
- L1_D_2: l1-dcache {
- compatible = "cache";
- };
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ opp-peak-kBps = <1200000>;
+ opp-supported-hw = <0xFF>;
};
+ };
+};
- CPU7: cpu@3 {
- device_type = "cpu";
- compatible = "qcom,kryo260";
- reg = <0x0 0x3>;
- enable-method = "psci";
- capacity-dmips-mhz = <640>;
- next-level-cache = <&L2_0>;
- L1_I_3: l1-icache {
- compatible = "cache";
- };
- L1_D_3: l1-dcache {
- compatible = "cache";
- };
- };
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&CPU4>;
- };
-
- core1 {
- cpu = <&CPU5>;
- };
-
- core2 {
- cpu = <&CPU6>;
- };
-
- core3 {
- cpu = <&CPU7>;
- };
- };
-
- cluster1 {
- core0 {
- cpu = <&CPU0>;
- };
+&CPU0 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <1024>;
+ /delete-property/ operating-points-v2;
+};
- core1 {
- cpu = <&CPU1>;
- };
+&CPU1 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <1024>;
+ /delete-property/ operating-points-v2;
+};
- core2 {
- cpu = <&CPU2>;
- };
+&CPU2 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <1024>;
+ /delete-property/ operating-points-v2;
+};
- core3 {
- cpu = <&CPU3>;
- };
- };
- };
- };
+&CPU3 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <1024>;
+ /delete-property/ operating-points-v2;
+};
- firmware {
- scm {
- compatible = "qcom,scm";
- };
- };
+&CPU4 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <640>;
+ /delete-property/ operating-points-v2;
+};
- memory {
- device_type = "memory";
- /* We expect the bootloader to fill in the reg */
- reg = <0 0 0 0>;
- };
+&CPU5 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <640>;
+ /delete-property/ operating-points-v2;
+};
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
+&CPU6 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <640>;
+ /delete-property/ operating-points-v2;
+};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
- };
+&CPU7 {
+ compatible = "qcom,kryo260";
+ capacity-dmips-mhz = <640>;
+ /delete-property/ operating-points-v2;
+};
- soc: soc {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0xffffffff>;
- compatible = "simple-bus";
-
- gcc: clock-controller@100000 {
- compatible = "qcom,gcc-sdm660";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0x00100000 0x94000>;
- };
+&gcc {
+ compatible = "qcom,gcc-sdm660";
+};
- tlmm: pinctrl@3100000 {
- compatible = "qcom,sdm660-pinctrl";
- reg = <0x03100000 0x400000>,
- <0x03500000 0x400000>,
- <0x03900000 0x400000>;
- reg-names = "south", "center", "north";
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- gpio-ranges = <&tlmm 0 0 114>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- uart_console_active: uart_console_active {
- pinmux {
- pins = "gpio4", "gpio5";
- function = "blsp_uart2";
- };
+&gpucc {
+ compatible = "qcom,gpucc-sdm660";
+};
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <2>;
- bias-disable;
- };
+&mdp {
+ ports {
+ port@1 {
+ reg = <1>;
+ mdp5_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
};
};
+ };
+};
- spmi_bus: spmi@800f000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x0800f000 0x1000>,
- <0x08400000 0x1000000>,
- <0x09400000 0x1000000>,
- <0x0a400000 0x220000>,
- <0x0800a000 0x3000>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
+&mdss {
+ dsi1: dsi@c996000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0c996000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ /* DSI1 shares the OPP table with DSI0 */
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd SDM660_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+ assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+ <&mmcc PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>,
+ <&dsi1_phy 1>;
+
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_BYTE1_CLK>,
+ <&mmcc MDSS_BYTE1_INTF_CLK>,
+ <&mmcc MNOC_AHB_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MISC_AHB_CLK>,
+ <&mmcc MDSS_PCLK1_CLK>,
+ <&mmcc MDSS_ESC1_CLK>;
+ clock-names = "mdp_core",
+ "byte",
+ "byte_intf",
+ "mnoc",
+ "iface",
+ "bus",
+ "core_mmss",
+ "pixel",
+ "core";
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ ports {
+ #address-cells = <1>;
#size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- cell-index = <0>;
- };
- blsp1_uart2: serial@c170000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x0c170000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- timer@17920000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "arm,armv7-timer-mem";
- reg = <0x17920000 0x1000>;
-
- frame@17921000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17921000 0x1000>,
- <0x17922000 0x1000>;
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&mdp5_intf2_out>;
+ };
};
- frame@17923000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17923000 0x1000>;
- status = "disabled";
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
};
+ };
+ };
- frame@17924000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17924000 0x1000>;
- status = "disabled";
- };
+ dsi1_phy: dsi-phy@c996400 {
+ compatible = "qcom,dsi-phy-14nm-660";
+ reg = <0x0c996400 0x100>,
+ <0x0c996500 0x300>,
+ <0x0c996800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
- frame@17925000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17925000 0x1000>;
- status = "disabled";
- };
+ #clock-cells = <1>;
+ #phy-cells = <0>;
- frame@17926000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17926000 0x1000>;
- status = "disabled";
- };
+ clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+ };
+};
- frame@17927000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17927000 0x1000>;
- status = "disabled";
- };
+&mmcc {
+ compatible = "qcom,mmcc-sdm660";
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&sleep_clk>,
+ <&gcc GCC_MMSS_GPLL0_CLK>,
+ <&gcc GCC_MMSS_GPLL0_DIV_CLK>,
+ <&dsi0_phy 1>,
+ <&dsi0_phy 0>,
+ <&dsi1_phy 1>,
+ <&dsi1_phy 0>,
+ <0>,
+ <0>;
+};
- frame@17928000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17928000 0x1000>;
- status = "disabled";
- };
- };
+&tlmm {
+ compatible = "qcom,sdm660-pinctrl";
+};
- intc: interrupt-controller@17a00000 {
- compatible = "arm,gic-v3";
- reg = <0x17a00000 0x10000>,
- <0x17b00000 0x100000>;
- #interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-controller;
- #redistributor-regions = <1>;
- redistributor-stride = <0x0 0x20000>;
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
+&tsens {
+ #qcom,sensors = <14>;
};
qcom,dual-dsi-mode;
+ /* DSI1 is slave, so use DSI0 clocks */
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
ports {
port@1 {
endpoint {
/ {
aliases {
+ serial0 = &uart9;
hsuart0 = &uart6;
};
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
gpio-keys {
compatible = "gpio-keys";
label = "Volume keys";
status = "okay";
memory-region = <&ipa_fw_mem>;
+ firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn";
};
&mdss {
};
};
+&uart9 {
+ label = "LS-UART1";
+ status = "okay";
+};
+
&ufs_mem_hc {
status = "okay";
no-map;
};
- ipa_fw_mem: memory@8c400000 {
- reg = <0 0x8c400000 0 0x10000>;
+ wlan_msa_mem: memory@8c400000 {
+ reg = <0 0x8c400000 0 0x100000>;
no-map;
};
- ipa_gsi_mem: memory@8c410000 {
- reg = <0 0x8c410000 0 0x5000>;
+ gpu_mem: memory@8c515000 {
+ reg = <0 0x8c515000 0 0x2000>;
no-map;
};
- gpu_mem: memory@8c415000 {
- reg = <0 0x8c415000 0 0x2000>;
+ ipa_fw_mem: memory@8c517000 {
+ reg = <0 0x8c517000 0 0x5a000>;
no-map;
};
- adsp_mem: memory@8c500000 {
- reg = <0 0x8c500000 0 0x1a00000>;
- no-map;
- };
-
- wlan_msa_mem: memory@8df00000 {
- reg = <0 0x8df00000 0 0x100000>;
+ adsp_mem: memory@8c600000 {
+ reg = <0 0x8c600000 0 0x1a00000>;
no-map;
};
power-domains = <&dispcc MDSS_GDSC>;
clocks = <&gcc GCC_DISP_AHB_CLK>,
- <&gcc GCC_DISP_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
- clock-names = "iface", "bus", "core";
+ clock-names = "iface", "core";
assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
assigned-clock-rates = <300000000>;
<0 0x0aeb0000 0 0x2008>;
reg-names = "mdp", "vbif";
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ clocks = <&gcc GCC_DISP_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- clock-names = "iface", "bus", "core", "vsync";
+ clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
"core",
"iface",
"bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SDM845_CX>;
"core",
"iface",
"bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SDM845_CX>;
};
};
+&ipa {
+ status = "okay";
+ memory-region = <&ipa_fw_mem>;
+};
+
&mdss {
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm6125.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <394 0x10000>; /* sm6125 v1 */
+ qcom,board-id = <34 0>;
+
+ model = "Sony Xperia 10 II";
+ compatible = "sony,pdx201", "qcom,sm6125";
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer0: framebuffer@5c000000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x5c000000 0 (2520 * 1080 * 4)>;
+ width = <1080>;
+ height = <2520>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ extcon_usb: extcon-usb {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ status = "okay";
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ vol-dn {
+ label = "Volume Down";
+ gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpio-key,wakeup;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved_memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ debug_mem: memory@ffb00000 {
+ reg = <0x0 0xffb00000 0x0 0xc0000>;
+ no-map;
+ };
+
+ last_log_mem: memory@ffbc0000 {
+ reg = <0x0 0xffbc0000 0x0 0x80000>;
+ no-map;
+ };
+
+ pstore_mem: ramoops@ffc00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xffc40000 0x0 0xc0000>;
+ record-size = <0x1000>;
+ console-size = <0x40000>;
+ msg-size = <0x20000 0x20000>;
+ };
+
+ cmdline_mem: memory@ffd00000 {
+ reg = <0x0 0xffd40000 0x0 0x1000>;
+ no-map;
+ };
+ };
+};
+
+&hsusb_phy1 {
+ status = "okay";
+};
+
+&sdc2_state_off {
+ sd-cd {
+ pins = "gpio98";
+ bias-disable;
+ drive-strength = <2>;
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <22 2>, <28 6>;
+
+ sdc2_state_on: sdc2-on {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sd-cd {
+ pins = "gpio98";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ extcon = <&extcon_usb>;
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sm6125.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+ interrupt-parent = <&intc>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ clock-output-names = "sleep_clk";
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1638>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1638>;
+ next-level-cache = <&L2_1>;
+ };
+
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1638>;
+ next-level-cache = <&L2_1>;
+ };
+
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1638>;
+ next-level-cache = <&L2_1>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+
+ core1 {
+ cpu = <&CPU5>;
+ };
+
+ core2 {
+ cpu = <&CPU6>;
+ };
+
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-sm6125", "qcom,scm";
+ #reset-cells = <1>;
+ };
+ };
+
+ memory@40000000 {
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x40000000 0x0 0x0>;
+ device_type = "memory";
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hyp_mem: memory@45700000 {
+ reg = <0x0 0x45700000 0x0 0x600000>;
+ no-map;
+ };
+
+ xbl_aop_mem: memory@45e00000 {
+ reg = <0x0 0x45e00000 0x0 0x140000>;
+ no-map;
+ };
+
+ sec_apps_mem: memory@45fff000 {
+ reg = <0x0 0x45fff000 0x0 0x1000>;
+ no-map;
+ };
+
+ smem_mem: memory@46000000 {
+ reg = <0x0 0x46000000 0x0 0x200000>;
+ no-map;
+ };
+
+ reserved_mem1: memory@46200000 {
+ reg = <0x0 0x46200000 0x0 0x2d00000>;
+ no-map;
+ };
+
+ camera_mem: memory@4ab00000 {
+ reg = <0x0 0x4ab00000 0x0 0x500000>;
+ no-map;
+ };
+
+ modem_mem: memory@4b000000 {
+ reg = <0x0 0x4b000000 0x0 0x7e00000>;
+ no-map;
+ };
+
+ venus_mem: memory@52e00000 {
+ reg = <0x0 0x52e00000 0x0 0x500000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@53300000 {
+ reg = <0x0 0x53300000 0x0 0x200000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@53500000 {
+ reg = <0x0 0x53500000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ adsp_pil_mem: memory@55300000 {
+ reg = <0x0 0x55300000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@57100000 {
+ reg = <0x0 0x57100000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: memory@57110000 {
+ reg = <0x0 0x57110000 0x0 0x5000>;
+ no-map;
+ };
+
+ gpu_mem: memory@57115000 {
+ reg = <0x0 0x57115000 0x0 0x2000>;
+ no-map;
+ };
+
+ cont_splash_mem: memory@5c000000 {
+ reg = <0x0 0x5c000000 0x0 0x00f00000>;
+ no-map;
+ };
+
+ dfps_data_mem: memory@5cf00000 {
+ reg = <0x0 0x5cf00000 0x0 0x0100000>;
+ no-map;
+ };
+
+ cdsp_sec_mem: memory@5f800000 {
+ reg = <0x0 0x5f800000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ qseecom_mem: memory@5e400000 {
+ reg = <0x0 0x5e400000 0x0 0x1400000>;
+ no-map;
+ };
+
+ sdsp_mem: memory@f3000000 {
+ reg = <0x0 0xf3000000 0x0 0x400000>;
+ no-map;
+ };
+
+ adsp_mem: memory@f3400000 {
+ reg = <0x0 0xf3400000 0x0 0x800000>;
+ no-map;
+ };
+
+ qseecom_ta_mem: memory@13fc00000 {
+ reg = <0x1 0x3fc00000 0x0 0x400000>;
+ no-map;
+ };
+ };
+
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sm6125";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+ };
+ };
+
+ smem: smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x00 0xffffffff>;
+ compatible = "simple-bus";
+
+ tcsr_mutex: hwlock@340000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x00340000 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ tlmm: pinctrl@500000 {
+ compatible = "qcom,sm6125-tlmm";
+ reg = <0x00500000 0x400000>,
+ <0x00900000 0x400000>,
+ <0x00d00000 0x400000>;
+ reg-names = "west", "south", "east";
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 134>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ sdc2_state_off: sdc2-off {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ gcc: clock-controller@1400000 {
+ compatible = "qcom,gcc-sm6125";
+ reg = <0x01400000 0x1f0000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clock-names = "bi_tcxo", "sleep_clk";
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+ };
+
+ hsusb_phy1: phy@1613000 {
+ compatible = "qcom,msm8996-qusb2-phy";
+ reg = <0x01613000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&gcc GCC_AHB2PHY_USB_CLK>;
+ clock-names = "ref", "cfg_ahb";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ status = "disabled";
+ };
+
+ rpm_msg_ram: memory@45f0000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x045f0000 0x7000>;
+ };
+
+ sdhc_1: sdhci@4744000 {
+ compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
+ reg-names = "hc", "core";
+
+ interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };
+
+ sdhc_2: sdhci@4784000 {
+ compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x04784000 0x1000>;
+ reg-names = "hc";
+
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+
+ pinctrl-0 = <&sdc2_state_on>;
+ pinctrl-1 = <&sdc2_state_off>;
+ pinctrl-names = "default", "sleep";
+
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usb3: usb@4ef8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0x04ef8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <66666667>;
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+ qcom,select-utmi-as-pipe-clk;
+ status = "disabled";
+
+ usb3_dwc3: usb@4e00000 {
+ compatible = "snps,dwc3";
+ reg = <0x04e00000 0xcd00>;
+ interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hsusb_phy1>;
+ phy-names = "usb2-phy";
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ maximum-speed = "high-speed";
+ dr_mode = "peripheral";
+ };
+ };
+
+ spmi_bus: spmi@1c40000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x01c40000 0x1100>,
+ <0x01e00000 0x2000000>,
+ <0x03e00000 0x100000>,
+ <0x03f00000 0xa0000>,
+ <0x01c0a000 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+ };
+
+ apcs_glb: mailbox@f111000 {
+ compatible = "qcom,sm6125-apcs-hmss-global";
+ reg = <0x0f111000 0x1000>;
+
+ #mbox-cells = <1>;
+ };
+
+ timer@f120000 {
+ compatible = "arm,armv7-timer-mem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = <0x0f120000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@0f121000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f121000 0x1000>,
+ <0x0f122000 0x1000>;
+ };
+
+ frame@0f123000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f123000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@0f124000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f124000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f125000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f125000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f126000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f126000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f127000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f127000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f128000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f128000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ intc: interrupt-controller@f200000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0f200000 0x20000>,
+ <0x0f300000 0x100000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 1 0xf08
+ GIC_PPI 2 0xf08
+ GIC_PPI 3 0xf08
+ GIC_PPI 0 0xf08>;
+ clock-frequency = <19200000>;
+ };
+};
/ {
model = "Qualcomm Technologies, Inc. SM8150 MTP";
- compatible = "qcom,sm8150-mtp";
+ compatible = "qcom,sm8150-mtp", "qcom,sm8150";
aliases {
serial0 = &uart2;
#include <dt-bindings/clock/qcom,gcc-sm8150.h>
#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sm8150.h>
#include <dt-bindings/thermal/thermal.h>
/ {
dynamic-power-coefficient = <232>;
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD0>;
power-domain-names = "psci";
#cooling-cells = <2>;
dynamic-power-coefficient = <232>;
next-level-cache = <&L2_100>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD1>;
power-domain-names = "psci";
#cooling-cells = <2>;
dynamic-power-coefficient = <232>;
next-level-cache = <&L2_200>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD2>;
power-domain-names = "psci";
#cooling-cells = <2>;
dynamic-power-coefficient = <232>;
next-level-cache = <&L2_300>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD3>;
power-domain-names = "psci";
#cooling-cells = <2>;
dynamic-power-coefficient = <369>;
next-level-cache = <&L2_400>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD4>;
power-domain-names = "psci";
#cooling-cells = <2>;
dynamic-power-coefficient = <369>;
next-level-cache = <&L2_500>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD5>;
power-domain-names = "psci";
#cooling-cells = <2>;
dynamic-power-coefficient = <369>;
next-level-cache = <&L2_600>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD6>;
power-domain-names = "psci";
#cooling-cells = <2>;
dynamic-power-coefficient = <421>;
next-level-cache = <&L2_700>;
qcom,freq-domain = <&cpufreq_hw 2>;
+ operating-points-v2 = <&cpu7_opp_table>;
+ interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD7>;
power-domain-names = "psci";
#cooling-cells = <2>;
};
};
+ cpu0_opp_table: cpu0_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ cpu0_opp1: opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-peak-kBps = <800000 9600000>;
+ };
+
+ cpu0_opp2: opp-403200000 {
+ opp-hz = /bits/ 64 <403200000>;
+ opp-peak-kBps = <800000 9600000>;
+ };
+
+ cpu0_opp3: opp-499200000 {
+ opp-hz = /bits/ 64 <499200000>;
+ opp-peak-kBps = <800000 12902400>;
+ };
+
+ cpu0_opp4: opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ opp-peak-kBps = <800000 12902400>;
+ };
+
+ cpu0_opp5: opp-672000000 {
+ opp-hz = /bits/ 64 <672000000>;
+ opp-peak-kBps = <800000 15974400>;
+ };
+
+ cpu0_opp6: opp-768000000 {
+ opp-hz = /bits/ 64 <768000000>;
+ opp-peak-kBps = <1804000 19660800>;
+ };
+
+ cpu0_opp7: opp-844800000 {
+ opp-hz = /bits/ 64 <844800000>;
+ opp-peak-kBps = <1804000 19660800>;
+ };
+
+ cpu0_opp8: opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ opp-peak-kBps = <1804000 22732800>;
+ };
+
+ cpu0_opp9: opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ opp-peak-kBps = <1804000 22732800>;
+ };
+
+ cpu0_opp10: opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ opp-peak-kBps = <2188000 25804800>;
+ };
+
+ cpu0_opp11: opp-1209600000 {
+ opp-hz = /bits/ 64 <1209600000>;
+ opp-peak-kBps = <2188000 31948800>;
+ };
+
+ cpu0_opp12: opp-1305600000 {
+ opp-hz = /bits/ 64 <1305600000>;
+ opp-peak-kBps = <3072000 31948800>;
+ };
+
+ cpu0_opp13: opp-1382400000 {
+ opp-hz = /bits/ 64 <1382400000>;
+ opp-peak-kBps = <3072000 31948800>;
+ };
+
+ cpu0_opp14: opp-1478400000 {
+ opp-hz = /bits/ 64 <1478400000>;
+ opp-peak-kBps = <3072000 31948800>;
+ };
+
+ cpu0_opp15: opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ opp-peak-kBps = <3072000 40550400>;
+ };
+
+ cpu0_opp16: opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ opp-peak-kBps = <3072000 40550400>;
+ };
+
+ cpu0_opp17: opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-peak-kBps = <3072000 43008000>;
+ };
+
+ cpu0_opp18: opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ opp-peak-kBps = <3072000 43008000>;
+ };
+ };
+
+ cpu4_opp_table: cpu4_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ cpu4_opp1: opp-710400000 {
+ opp-hz = /bits/ 64 <710400000>;
+ opp-peak-kBps = <1804000 15974400>;
+ };
+
+ cpu4_opp2: opp-825600000 {
+ opp-hz = /bits/ 64 <825600000>;
+ opp-peak-kBps = <2188000 19660800>;
+ };
+
+ cpu4_opp3: opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ opp-peak-kBps = <2188000 22732800>;
+ };
+
+ cpu4_opp4: opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-peak-kBps = <3072000 25804800>;
+ };
+
+ cpu4_opp5: opp-1171200000 {
+ opp-hz = /bits/ 64 <1171200000>;
+ opp-peak-kBps = <3072000 31948800>;
+ };
+
+ cpu4_opp6: opp-1286400000 {
+ opp-hz = /bits/ 64 <1286400000>;
+ opp-peak-kBps = <4068000 31948800>;
+ };
+
+ cpu4_opp7: opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ opp-peak-kBps = <4068000 31948800>;
+ };
+
+ cpu4_opp8: opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ opp-peak-kBps = <4068000 40550400>;
+ };
+
+ cpu4_opp9: opp-1612800000 {
+ opp-hz = /bits/ 64 <1612800000>;
+ opp-peak-kBps = <4068000 40550400>;
+ };
+
+ cpu4_opp10: opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-peak-kBps = <4068000 43008000>;
+ };
+
+ cpu4_opp11: opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-peak-kBps = <6220000 43008000>;
+ };
+
+ cpu4_opp12: opp-1920000000 {
+ opp-hz = /bits/ 64 <1920000000>;
+ opp-peak-kBps = <6220000 49152000>;
+ };
+
+ cpu4_opp13: opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-peak-kBps = <7216000 49152000>;
+ };
+
+ cpu4_opp14: opp-2131200000 {
+ opp-hz = /bits/ 64 <2131200000>;
+ opp-peak-kBps = <8368000 49152000>;
+ };
+
+ cpu4_opp15: opp-2227200000 {
+ opp-hz = /bits/ 64 <2227200000>;
+ opp-peak-kBps = <8368000 51609600>;
+ };
+
+ cpu4_opp16: opp-2323200000 {
+ opp-hz = /bits/ 64 <2323200000>;
+ opp-peak-kBps = <8368000 51609600>;
+ };
+
+ cpu4_opp17: opp-2419200000 {
+ opp-hz = /bits/ 64 <2419200000>;
+ opp-peak-kBps = <8368000 51609600>;
+ };
+ };
+
+ cpu7_opp_table: cpu7_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ cpu7_opp1: opp-825600000 {
+ opp-hz = /bits/ 64 <825600000>;
+ opp-peak-kBps = <2188000 19660800>;
+ };
+
+ cpu7_opp2: opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ opp-peak-kBps = <2188000 22732800>;
+ };
+
+ cpu7_opp3: opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-peak-kBps = <3072000 25804800>;
+ };
+
+ cpu7_opp4: opp-1171200000 {
+ opp-hz = /bits/ 64 <1171200000>;
+ opp-peak-kBps = <3072000 31948800>;
+ };
+
+ cpu7_opp5: opp-1286400000 {
+ opp-hz = /bits/ 64 <1286400000>;
+ opp-peak-kBps = <4068000 31948800>;
+ };
+
+ cpu7_opp6: opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ opp-peak-kBps = <4068000 31948800>;
+ };
+
+ cpu7_opp7: opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ opp-peak-kBps = <4068000 40550400>;
+ };
+
+ cpu7_opp8: opp-1612800000 {
+ opp-hz = /bits/ 64 <1612800000>;
+ opp-peak-kBps = <4068000 40550400>;
+ };
+
+ cpu7_opp9: opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-peak-kBps = <4068000 43008000>;
+ };
+
+ cpu7_opp10: opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-peak-kBps = <6220000 43008000>;
+ };
+
+ cpu7_opp11: opp-1920000000 {
+ opp-hz = /bits/ 64 <1920000000>;
+ opp-peak-kBps = <6220000 49152000>;
+ };
+
+ cpu7_opp12: opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-peak-kBps = <7216000 49152000>;
+ };
+
+ cpu7_opp13: opp-2131200000 {
+ opp-hz = /bits/ 64 <2131200000>;
+ opp-peak-kBps = <8368000 49152000>;
+ };
+
+ cpu7_opp14: opp-2227200000 {
+ opp-hz = /bits/ 64 <2227200000>;
+ opp-peak-kBps = <8368000 51609600>;
+ };
+
+ cpu7_opp15: opp-2323200000 {
+ opp-hz = /bits/ 64 <2323200000>;
+ opp-peak-kBps = <8368000 51609600>;
+ };
+
+ cpu7_opp16: opp-2419200000 {
+ opp-hz = /bits/ 64 <2419200000>;
+ opp-peak-kBps = <8368000 51609600>;
+ };
+
+ cpu7_opp17: opp-2534400000 {
+ opp-hz = /bits/ 64 <2534400000>;
+ opp-peak-kBps = <8368000 51609600>;
+ };
+
+ cpu7_opp18: opp-2649600000 {
+ opp-hz = /bits/ 64 <2649600000>;
+ opp-peak-kBps = <8368000 51609600>;
+ };
+
+ cpu7_opp19: opp-2745600000 {
+ opp-hz = /bits/ 64 <2745600000>;
+ opp-peak-kBps = <8368000 51609600>;
+ };
+
+ cpu7_opp20: opp-2841600000 {
+ opp-hz = /bits/ 64 <2841600000>;
+ opp-peak-kBps = <8368000 51609600>;
+ };
+ };
+
firmware {
scm: scm {
compatible = "qcom,scm-sm8150", "qcom,scm";
status = "disabled";
};
+ spi0: spi@880000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x880000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c1: i2c@884000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00884000 0 0x4000>;
status = "disabled";
};
+ spi1: spi@884000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x884000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c2: i2c@888000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00888000 0 0x4000>;
status = "disabled";
};
+ spi2: spi@888000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x888000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c3: i2c@88c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0088c000 0 0x4000>;
status = "disabled";
};
+ spi3: spi@88c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x88c000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi3_default>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c4: i2c@890000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00890000 0 0x4000>;
status = "disabled";
};
+ spi4: spi@890000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x890000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi4_default>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c5: i2c@894000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00894000 0 0x4000>;
status = "disabled";
};
+ spi5: spi@894000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x894000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi5_default>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c6: i2c@898000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00898000 0 0x4000>;
status = "disabled";
};
+ spi6: spi@898000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x898000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi6_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c7: i2c@89c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0089c000 0 0x4000>;
status = "disabled";
};
+ spi7: spi@89c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x89c000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi7_default>;
+ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
gpi_dma1: dma-controller@a00000 {
status = "disabled";
};
+ spi8: spi@a80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xa80000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi8_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c9: i2c@a84000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a84000 0 0x4000>;
status = "disabled";
};
+ spi9: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xa84000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi9_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c10: i2c@a88000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a88000 0 0x4000>;
status = "disabled";
};
+ spi10: spi@a88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xa88000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi10_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c11: i2c@a8c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a8c000 0 0x4000>;
status = "disabled";
};
+ spi11: spi@a8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xa8c000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi11_default>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart2: serial@a90000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
status = "disabled";
};
+ spi12: spi@a90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xa90000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi12_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c16: i2c@94000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0094000 0 0x4000>;
#size-cells = <0>;
status = "disabled";
};
+
+ spi16: spi@a94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xa94000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi16_default>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
gpi_dma2: dma-controller@c00000 {
status = "disabled";
};
+ spi17: spi@c80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xc80000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi17_default>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c18: i2c@c84000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c84000 0 0x4000>;
status = "disabled";
};
+ spi18: spi@c84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xc84000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi18_default>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c19: i2c@c88000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c88000 0 0x4000>;
status = "disabled";
};
+ spi19: spi@c88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xc88000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi19_default>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c13: i2c@c8c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c8c000 0 0x4000>;
status = "disabled";
};
+ spi13: spi@c8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xc8c000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi13_default>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c14: i2c@c90000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c90000 0 0x4000>;
status = "disabled";
};
+ spi14: spi@c90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xc90000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi14_default>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c15: i2c@c94000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c94000 0 0x4000>;
#size-cells = <0>;
status = "disabled";
};
+
+ spi15: spi@c94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xc94000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi15_default>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
config_noc: interconnect@1500000 {
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
- reg = <0 0x01d84000 0 0x2500>;
+ reg = <0 0x01d84000 0 0x2500>,
+ <0 0x01d90000 0 0x8000>;
+ reg-names = "std", "ice";
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufs_mem_phy_lanes>;
phy-names = "ufsphy";
"ref_clk",
"tx_lane0_sync_clk",
"rx_lane0_sync_clk",
- "rx_lane1_sync_clk";
+ "rx_lane1_sync_clk",
+ "ice_core_clk";
clocks =
<&gcc GCC_UFS_PHY_AXI_CLK>,
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
+ <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
freq-table-hz =
<37500000 300000000>,
<0 0>,
<0 0>,
<0 0>,
<0 0>,
- <0 0>;
+ <0 0>,
+ <0 300000000>;
status = "disabled";
};
};
};
+ qup_spi0_default: qup-spi0-default {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "qup0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c1_default: qup-i2c1-default {
mux {
pins = "gpio114", "gpio115";
};
};
+ qup_spi1_default: qup-spi1-default {
+ pins = "gpio114", "gpio115", "gpio116", "gpio117";
+ function = "qup1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c2_default: qup-i2c2-default {
mux {
pins = "gpio126", "gpio127";
};
};
+ qup_spi2_default: qup-spi2-default {
+ pins = "gpio126", "gpio127", "gpio128", "gpio129";
+ function = "qup2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c3_default: qup-i2c3-default {
mux {
pins = "gpio144", "gpio145";
};
};
+ qup_spi3_default: qup-spi3-default {
+ pins = "gpio144", "gpio145", "gpio146", "gpio147";
+ function = "qup3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c4_default: qup-i2c4-default {
mux {
pins = "gpio51", "gpio52";
};
};
+ qup_spi4_default: qup-spi4-default {
+ pins = "gpio51", "gpio52", "gpio53", "gpio54";
+ function = "qup4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c5_default: qup-i2c5-default {
mux {
pins = "gpio121", "gpio122";
};
};
+ qup_spi5_default: qup-spi5-default {
+ pins = "gpio119", "gpio120", "gpio121", "gpio122";
+ function = "qup5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c6_default: qup-i2c6-default {
mux {
pins = "gpio6", "gpio7";
};
};
+ qup_spi6_default: qup-spi6_default {
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ function = "qup6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c7_default: qup-i2c7-default {
mux {
pins = "gpio98", "gpio99";
};
};
+ qup_spi7_default: qup-spi7_default {
+ pins = "gpio98", "gpio99", "gpio100", "gpio101";
+ function = "qup7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c8_default: qup-i2c8-default {
mux {
pins = "gpio88", "gpio89";
};
};
+ qup_spi8_default: qup-spi8-default {
+ pins = "gpio88", "gpio89", "gpio90", "gpio91";
+ function = "qup8";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c9_default: qup-i2c9-default {
mux {
pins = "gpio39", "gpio40";
};
};
+ qup_spi9_default: qup-spi9-default {
+ pins = "gpio39", "gpio40", "gpio41", "gpio42";
+ function = "qup9";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c10_default: qup-i2c10-default {
mux {
pins = "gpio9", "gpio10";
};
};
+ qup_spi10_default: qup-spi10-default {
+ pins = "gpio9", "gpio10", "gpio11", "gpio12";
+ function = "qup10";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c11_default: qup-i2c11-default {
mux {
pins = "gpio94", "gpio95";
};
};
+ qup_spi11_default: qup-spi11-default {
+ pins = "gpio92", "gpio93", "gpio94", "gpio95";
+ function = "qup11";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c12_default: qup-i2c12-default {
mux {
pins = "gpio83", "gpio84";
};
};
+ qup_spi12_default: qup-spi12-default {
+ pins = "gpio83", "gpio84", "gpio85", "gpio86";
+ function = "qup12";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c13_default: qup-i2c13-default {
mux {
pins = "gpio43", "gpio44";
};
};
+ qup_spi13_default: qup-spi13-default {
+ pins = "gpio43", "gpio44", "gpio45", "gpio46";
+ function = "qup13";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c14_default: qup-i2c14-default {
mux {
pins = "gpio47", "gpio48";
};
};
+ qup_spi14_default: qup-spi14-default {
+ pins = "gpio47", "gpio48", "gpio49", "gpio50";
+ function = "qup14";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c15_default: qup-i2c15-default {
mux {
pins = "gpio27", "gpio28";
};
};
+ qup_spi15_default: qup-spi15-default {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30";
+ function = "qup15";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c16_default: qup-i2c16-default {
mux {
pins = "gpio86", "gpio85";
};
};
+ qup_spi16_default: qup-spi16-default {
+ pins = "gpio83", "gpio84", "gpio85", "gpio86";
+ function = "qup16";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c17_default: qup-i2c17-default {
mux {
pins = "gpio55", "gpio56";
};
};
+ qup_spi17_default: qup-spi17-default {
+ pins = "gpio55", "gpio56", "gpio57", "gpio58";
+ function = "qup17";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c18_default: qup-i2c18-default {
mux {
pins = "gpio23", "gpio24";
};
};
+ qup_spi18_default: qup-spi18-default {
+ pins = "gpio23", "gpio24", "gpio25", "gpio26";
+ function = "qup18";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_i2c19_default: qup-i2c19-default {
mux {
pins = "gpio57", "gpio58";
bias-disable;
};
};
+
+ qup_spi19_default: qup-spi19-default {
+ pins = "gpio55", "gpio56", "gpio57", "gpio58";
+ function = "qup19";
+ drive-strength = <6>;
+ bias-disable;
+ };
};
remoteproc_mpss: remoteproc@4080000 {
};
};
- dc_noc: interconnect@9160000 {
- compatible = "qcom,sm8150-dc-noc";
- reg = <0 0x09160000 0 0x3200>;
- #interconnect-cells = <1>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- gem_noc: interconnect@9680000 {
- compatible = "qcom,sm8150-gem-noc";
- reg = <0 0x09680000 0 0x3e200>;
- #interconnect-cells = <1>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
usb_2_qmpphy: phy@88eb000 {
compatible = "qcom,sm8150-qmp-usb3-uni-phy";
reg = <0 0x088eb000 0 0x200>;
};
};
+ dc_noc: interconnect@9160000 {
+ compatible = "qcom,sm8150-dc-noc";
+ reg = <0 0x09160000 0 0x3200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gem_noc: interconnect@9680000 {
+ compatible = "qcom,sm8150-gem-noc";
+ reg = <0 0x09680000 0 0x3e200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
usb_1: usb@a6f8800 {
compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
resets = <&gcc GCC_USB30_SEC_BCR>;
- usb_2_dwc3: dwc3@a800000 {
+ usb_2_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c14_default>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c15_default>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c16_default>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c17_default>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c18_default>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c19_default>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c7_default>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c8_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c9_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c10_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c11_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c13_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
power-domains = <&rpmhpd SM8250_CX>;
operating-points-v2 = <&qup_opp_table>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
<&gcc GCC_USB3_PHY_SEC_BCR>;
reset-names = "phy", "common";
- usb_2_ssphy: lane@88eb200 {
+ usb_2_ssphy: lanes@88eb200 {
reg = <0 0x088eb200 0 0x200>,
<0 0x088eb400 0 0x200>,
<0 0x088eb800 0 0x800>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
- usb_1_dwc3: dwc3@a600000 {
+ usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
resets = <&gcc GCC_USB30_SEC_BCR>;
- usb_2_dwc3: dwc3@a800000 {
+ usb_2_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&dispcc MDSS_GDSC>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&gcc GCC_DISP_HF_AXI_CLK>,
<&gcc GCC_DISP_SF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
- clock-names = "iface", "bus", "nrt_bus", "core";
+ clock-names = "iface", "nrt_bus", "core";
assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
assigned-clock-rates = <460000000>;
"iface",
"bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SM8250_MMCX>;
"iface",
"bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SM8250_MMCX>;
};
};
- epss_l3: interconnect@18591000 {
+ epss_l3: interconnect@18590000 {
compatible = "qcom,sm8250-epss-l3";
reg = <0 0x18590000 0 0x1000>;
firmware-name = "qcom/sm8350/modem.mbn";
};
-&qupv3_id_1 {
+&qupv3_id_0 {
status = "okay";
};
firmware-name = "qcom/sm8350/modem.mbn";
};
-&qupv3_id_1 {
+&qupv3_id_0 {
status = "okay";
};
#mbox-cells = <2>;
};
- qupv3_id_1: geniqup@9c0000 {
+ qupv3_id_0: geniqup@9c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x009c0000 0x0 0x6000>;
clock-names = "m-ahb", "s-ahb";
};
};
+ qupv3_id_1: geniqup@ac0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x00ac0000 0x0 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ i2c13: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a94000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c13_default_state>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
apps_smmu: iommu@15000000 {
compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
reg = <0 0x15000000 0 0x100000>;
clocks = <&rpmhcc RPMH_IPA_CLK>;
clock-names = "core";
- interconnects = <&aggre2_noc MASTER_IPA &gem_noc SLAVE_LLCC>,
- <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>,
+ interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
- interconnect-names = "ipa_to_llcc",
- "llcc_to_ebi1",
- "appss_to_ipa";
+ interconnect-names = "memory",
+ "config";
qcom,smem-states = <&ipa_smp2p_out 0>,
<&ipa_smp2p_out 1>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 204>;
+ wakeup-parent = <&pdc>;
qup_uart3_default_state: qup-uart3-default-state {
rx {
function = "qup3";
};
};
+
+ qup_i2c13_default_state: qup-i2c13-default-state {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "qup13";
+ };
+
+ config {
+ pins = "gpio0", "gpio1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
};
rng: rng@10d3000 {
resets = <&gcc GCC_USB30_PRIM_BCR>;
- usb_1_dwc3: dwc3@a600000 {
+ usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
resets = <&gcc GCC_USB30_SEC_BCR>;
- usb_2_dwc3: dwc3@a800000 {
+ usb_2_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
+
dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
compatible = "audio-graph-card";
label = "rcar-sound";
dais = <&rsnd_port0>, <&rsnd_port1>;
+ widgets = "Microphone", "Mic Jack",
+ "Line", "Line In Jack",
+ "Headphone", "Headphone Jack";
+ mic-det-gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ routing = "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN3R", "MICBIAS",
+ "Mic Jack", "IN3R";
};
vccq_sdhi0: regulator-vccq-sdhi0 {
pinctrl-names = "default";
phy-handle = <&phy0>;
tx-internal-delay-ps = <2000>;
+ rx-internal-delay-ps = <1800>;
status = "okay";
phy0: ethernet-phy@0 {
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
- i2c7 = &i2c_dvfs;
+ i2c7 = &iic_pmic;
};
/*
status = "disabled";
};
- i2c_dvfs: i2c@e60b0000 {
+ iic_pmic: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,iic-r8a774a1",
status = "disabled";
};
- i2c_dvfs: i2c@e60b0000 {
+ iic_pmic: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,iic-r8a774b1",
status = "disabled";
};
- i2c_dvfs: i2c@e60b0000 {
+ iic_pmic: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a774c0";
- reg = <0 0xe60b0000 0 0x15>;
+ compatible = "renesas,iic-r8a774c0",
+ "renesas,rcar-gen3-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 926>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
-
-&ehci2 {
- status = "okay";
-};
-
-&hdmi1 {
- status = "okay";
-
- ports {
- port@1 {
- reg = <1>;
- rcar_dw_hdmi1_out: endpoint {
- remote-endpoint = <&hdmi1_con>;
- };
- };
- port@2 {
- reg = <2>;
- dw_hdmi1_snd_in: endpoint {
- remote-endpoint = <&rsnd_endpoint2>;
- };
- };
- };
-};
-
-&hdmi1_con {
- remote-endpoint = <&rcar_dw_hdmi1_out>;
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&pfc {
- usb2_pins: usb2 {
- groups = "usb2";
- function = "usb2";
- };
-};
-
-&rcar_sound {
- ports {
- /* rsnd_port0/1 are described in salvator-common.dtsi */
- rsnd_port2: port@2 {
- reg = <2>;
- rsnd_endpoint2: endpoint {
- remote-endpoint = <&dw_hdmi1_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint2>;
- frame-master = <&rsnd_endpoint2>;
-
- playback = <&ssi3>;
- };
- };
- };
-};
-
-&sata {
- status = "okay";
-};
-
-&sound_card {
- dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1 /* HDMI0 */
- &rsnd_port2>; /* HDMI1 */
-};
-
-&usb2_phy2 {
- pinctrl-0 = <&usb2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the H3ULCB Kingfisher board
+ * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3 ES1.x
*
* Copyright (C) 2017 Renesas Electronics Corp.
* Copyright (C) 2017 Cogent Embedded, Inc.
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES1.x
*
* Copyright (C) 2016 Renesas Electronics Corp.
* Copyright (C) 2016 Cogent Embedded, Inc.
#include "r8a77951.dtsi"
+#undef SOC_HAS_USB2_CH3
+
&audma0 {
iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>,
<&ipmmu_mp1 2>, <&ipmmu_mp1 3>,
clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
-
-&ehci2 {
- status = "okay";
-};
-
-&hdmi1 {
- status = "okay";
-
- ports {
- port@1 {
- reg = <1>;
- rcar_dw_hdmi1_out: endpoint {
- remote-endpoint = <&hdmi1_con>;
- };
- };
- port@2 {
- reg = <2>;
- dw_hdmi1_snd_in: endpoint {
- remote-endpoint = <&rsnd_endpoint2>;
- };
- };
- };
-};
-
-&hdmi1_con {
- remote-endpoint = <&rcar_dw_hdmi1_out>;
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&pfc {
- usb2_pins: usb2 {
- groups = "usb2";
- function = "usb2";
- };
-};
-
-&rcar_sound {
- ports {
- /* rsnd_port0/1 are described in salvator-common.dtsi */
- rsnd_port2: port@2 {
- reg = <2>;
- rsnd_endpoint2: endpoint {
- remote-endpoint = <&dw_hdmi1_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint2>;
- frame-master = <&rsnd_endpoint2>;
-
- playback = <&ssi3>;
- };
- };
- };
-};
-
-&sata {
- status = "okay";
-};
-
-&sound_card {
- dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1 /* HDMI0 */
- &rsnd_port2>; /* HDMI1 */
-};
-
-&usb2_phy2 {
- pinctrl-0 = <&usb2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
-
-&ehci2 {
- status = "okay";
-};
-
-&ehci3 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&hdmi1 {
- status = "okay";
-
- ports {
- port@1 {
- reg = <1>;
- rcar_dw_hdmi1_out: endpoint {
- remote-endpoint = <&hdmi1_con>;
- };
- };
- port@2 {
- reg = <2>;
- dw_hdmi1_snd_in: endpoint {
- remote-endpoint = <&rsnd_endpoint2>;
- };
- };
- };
-};
-
-&hdmi1_con {
- remote-endpoint = <&rcar_dw_hdmi1_out>;
-};
-
-&hsusb3 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&ohci3 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&pca9654 {
- pcie-sata-switch-hog {
- gpio-hog;
- gpios = <7 GPIO_ACTIVE_HIGH>;
- output-low; /* enable SATA by default */
- line-name = "PCIE/SATA switch";
- };
-};
-
-&pfc {
- usb2_pins: usb2 {
- groups = "usb2";
- function = "usb2";
- };
-
- /*
- * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
- * (when SW31 is the default setting on Salvator-XS).
- * - If SW31 is the default setting, you cannot use USB2.0 ch3 on
- * r8a77951 with Salvator-XS.
- * Hence the SW31 setting must be changed like 2) below.
- * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
- * - Connect GP6_3[01] to ADV7842.
- * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON:
- * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power).
- * - Connect GP6_{04,21} to ADV7842.
- */
- usb2_ch3_pins: usb2_ch3 {
- groups = "usb2_ch3";
- function = "usb2_ch3";
- };
-};
-
-&rcar_sound {
- ports {
- /* rsnd_port0/1 are described in salvator-common.dtsi */
- rsnd_port2: port@2 {
- reg = <2>;
- rsnd_endpoint2: endpoint {
- remote-endpoint = <&dw_hdmi1_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint2>;
- frame-master = <&rsnd_endpoint2>;
-
- playback = <&ssi3>;
- };
- };
- };
-};
-
-/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
-&sata {
- status = "okay";
-};
-
-&sound_card {
- dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1 /* HDMI0 */
- &rsnd_port2>; /* HDMI1 */
-};
-
-&usb2_phy2 {
- pinctrl-0 = <&usb2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&usb2_phy3 {
- pinctrl-0 = <&usb2_ch3_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the H3ULCB Kingfisher board
+ * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3 ES2.0+
*
* Copyright (C) 2017 Renesas Electronics Corp.
* Copyright (C) 2017 Cogent Embedded, Inc.
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES2.0+
*
* Copyright (C) 2016 Renesas Electronics Corp.
* Copyright (C) 2016 Cogent Embedded, Inc.
#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+#define SOC_HAS_HDMI1
+#define SOC_HAS_SATA
+#define SOC_HAS_USB2_CH2
+#define SOC_HAS_USB2_CH3
+
/ {
compatible = "renesas,r8a7795";
#address-cells = <2>;
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the M3ULCB Kingfisher board
+ * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3-W
*
* Copyright (C) 2017 Renesas Electronics Corp.
* Copyright (C) 2017 Cogent Embedded, Inc.
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car M3-W
*
* Copyright (C) 2016 Renesas Electronics Corp.
* Copyright (C) 2016 Cogent Embedded, Inc.
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the M3ULCB Kingfisher board
+ * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3-W+
*
* Copyright (C) 2020 Eugeniu Rosca <rosca.eugeniu@gmail.com>
*/
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car
- * M3-W+
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car M3-W+
*
* Copyright (C) 2020 Renesas Electronics Corp.
*/
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+ <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+ <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+ <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+ <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
};
dmac1: dma-controller@e7300000 {
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+ <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+ <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+ <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+ <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
};
dmac2: dma-controller@e7310000 {
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+ <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+ <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+ <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+ <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
};
ipmmu_ds0: iommu@e6740000 {
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
+ iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
max-frequency = <200000000>;
power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
resets = <&cpg 314>;
+ iommus = <&ipmmu_ds1 32>;
status = "disabled";
};
max-frequency = <200000000>;
power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
resets = <&cpg 313>;
+ iommus = <&ipmmu_ds1 33>;
status = "disabled";
};
max-frequency = <200000000>;
power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
resets = <&cpg 312>;
+ iommus = <&ipmmu_ds1 34>;
status = "disabled";
};
max-frequency = <200000000>;
power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
resets = <&cpg 311>;
+ iommus = <&ipmmu_ds1 35>;
status = "disabled";
};
clock-names = "du.0", "du.1", "du.3",
"dclkin.0", "dclkin.1", "dclkin.3";
};
-
-&pca9654 {
- pcie-sata-switch-hog {
- gpio-hog;
- gpios = <7 GPIO_ACTIVE_HIGH>;
- output-low; /* enable SATA by default */
- line-name = "PCIE/SATA switch";
- };
-};
-
-/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
-&sata {
- status = "okay";
-};
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the M3NULCB Kingfisher board
+ * Device Tree Source for the M3NULCB Kingfisher board with R-Car M3-N
*
* Copyright (C) 2018 Renesas Electronics Corp.
* Copyright (C) 2018 Cogent Embedded, Inc.
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board
+ * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board with R-Car M3-N
*
* Copyright (C) 2018 Renesas Electronics Corp.
* Copyright (C) 2018 Cogent Embedded, Inc.
#define CPG_AUDIO_CLK_I R8A77965_CLK_S0D4
+#define SOC_HAS_SATA
+
/ {
compatible = "renesas,r8a77965";
#address-cells = <2>;
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the Eagle board
+ * Device Tree Source for the Eagle board with R-Car V3M
*
* Copyright (C) 2016-2017 Renesas Electronics Corp.
* Copyright (C) 2017 Cogent Embedded, Inc.
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the Condor board
+ * Device Tree Source for the Condor board with R-Car V3H
*
* Copyright (C) 2018 Renesas Electronics Corp.
* Copyright (C) 2018 Cogent Embedded, Inc.
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the ebisu board
+ * Device Tree Source for the Ebisu board with R-Car E3
*
* Copyright (C) 2018 Renesas Electronics Corp.
*/
/dts-v1/;
#include "r8a77990.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Renesas Ebisu board based on r8a77990";
};
};
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&keys_pins>;
+ pinctrl-names = "default";
+
+ key-1 {
+ gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "SW4-1";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-2 {
+ gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "SW4-2";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-3 {
+ gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "SW4-3";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-4 {
+ gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_4>;
+ label = "SW4-4";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ };
+
lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <®_3p3v>;
rohm,ddr-backup-power = <0x1>;
rohm,rstbmode-level;
};
+
+ eeprom@50 {
+ compatible = "rohm,br24t01", "atmel,24c01";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
};
&lvds0 {
function = "intc_ex";
};
+ keys_pins: keys {
+ pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13";
+ bias-pull-up;
+ };
+
pwm3_pins: pwm3 {
groups = "pwm3_b";
function = "pwm3";
i2c_dvfs: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a77990";
- reg = <0 0xe60b0000 0 0x15>;
+ compatible = "renesas,iic-r8a77990",
+ "renesas,rcar-gen3-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 926>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the Draak board
+ * Device Tree Source for the Draak board with R-Car D3
*
* Copyright (C) 2016-2018 Renesas Electronics Corp.
* Copyright (C) 2017 Glider bvba
/dts-v1/;
#include "r8a77995.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Renesas Draak board based on r8a77995";
ethernet0 = &avb;
};
+ audio_clkout: audio-clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 50000>;
};
};
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&keys_pins>;
+ pinctrl-names = "default";
+
+ key-1 {
+ gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "SW56-1";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-2 {
+ gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "SW56-2";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-3 {
+ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "SW56-3";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-4 {
+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_4>;
+ label = "SW56-4";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ };
+
lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <®_3p3v>;
regulator-always-on;
};
+ sound_card: sound {
+ compatible = "audio-graph-card";
+
+ dais = <&rsnd_port0 /* ak4613 */
+ /* HDMI is not yet supported */
+ >;
+ };
+
vga {
compatible = "vga-connector";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
+
+ x19_clk: x19 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+};
+
+&audio_clk_b {
+ /*
+ * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB,
+ * and R-Car Sound uses AUDIO_CLKB.
+ * Note is that schematic indicates VI4_FIELD conection only
+ * not AUDIO_CLKB at SoC page.
+ * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60.
+ * SW60 should be 1-2.
+ */
+
+ clock-frequency = <22579200>;
};
&avb {
pinctrl-names = "default";
status = "okay";
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 0>; /* audio_clkout */
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+
+ port {
+ ak4613_endpoint: endpoint {
+ remote-endpoint = <&rsnd_for_ak4613>;
+ };
+ };
+ };
+
composite-in@20 {
compatible = "adi,adv7180cp";
reg = <0x20>;
interrupt-parent = <&gpio1>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
- /* Depends on LVDS */
- max-clock = <135000000>;
- min-vrefresh = <50>;
-
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
};
};
+ cs2000: clk-multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+
eeprom@50 {
compatible = "rohm,br24t01", "atmel,24c01";
reg = <0x50>;
function = "i2c1";
};
+ keys_pins: keys {
+ pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15";
+ bias-pull-up;
+ };
+
pwm0_pins: pwm0 {
groups = "pwm0_c";
function = "pwm0";
power-source = <1800>;
};
+ sound_pins: sound {
+ groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound-clk {
+ groups = "audio_clk_a", "audio_clk_b",
+ "audio_clkout", "audio_clkout1";
+ function = "audio_clk";
+ };
+
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
status = "okay";
};
+&rcar_sound {
+ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1 */
+ #clock-cells = <1>;
+ clock-frequency = <12288000 11289600>;
+
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
+ <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&cs2000>, <&audio_clk_b>,
+ <&cpg CPG_CORE R8A77995_CLK_ZA2>;
+
+ ports {
+ rsnd_port0: port {
+ rsnd_for_ak4613: endpoint {
+ remote-endpoint = <&ak4613_endpoint>;
+ dai-format = "left_j";
+ bitclock-master = <&rsnd_for_ak4613>;
+ frame-master = <&rsnd_for_ak4613>;
+ playback = <&ssi3>, <&src5>, <&dvc0>;
+ capture = <&ssi4>, <&src6>, <&dvc1>;
+ };
+ };
+ };
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
status = "okay";
};
+&ssi4 {
+ shared-pin;
+};
+
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
#address-cells = <2>;
#size-cells = <2>;
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
/* External CAN clock - to be overridden by boards that provide it */
can_clk: can {
compatible = "fixed-clock";
status = "disabled";
};
+ rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
+ <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&cpg CPG_CORE R8A77995_CLK_ZA2>;
+ clock-names = "ssi-all",
+ "ssi.4", "ssi.3",
+ "src.6", "src.5",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_i";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1011>, <&cpg 1012>;
+ reset-names = "ssi-all",
+ "ssi.4", "ssi.3";
+ status = "disabled";
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma0 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma0 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,src {
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma0 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma0 0x08>,
+ <&audma0 0x6f>, <&audma0 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma0 0x0a>,
+ <&audma0 0x71>, <&audma0 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ };
+ };
+
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a77995",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+ <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+ <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+ <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+ <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+ <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+ <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+ <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+ };
+
ohci0: usb@ee080000 {
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the Falcon CPU and BreakOut boards
+ * Device Tree Source for the Falcon CPU and BreakOut boards with R-Car V3U
*
* Copyright (C) 2020 Renesas Electronics Corp.
*/
#power-domain-cells = <1>;
};
+ tsc: thermal@e6190000 {
+ compatible = "renesas,r8a779a0-thermal";
+ reg = <0 0xe6190000 0 0x200>,
+ <0 0xe6198000 0 0x200>,
+ <0 0xe61a0000 0 0x200>,
+ <0 0xe61a8000 0 0x200>,
+ <0 0xe61b0000 0 0x200>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ #thermal-sensor-cells = <1>;
+ };
+
tmu0: timer@e61e0000 {
compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
reg = <0 0xe61e0000 0 0x30>;
status = "disabled";
};
- tsc: thermal@e6190000 {
- compatible = "renesas,r8a779a0-thermal";
- reg = <0 0xe6190000 0 0x200>,
- <0 0xe6198000 0 0x200>,
- <0 0xe61a0000 0 0x200>,
- <0 0xe61a8000 0 0x200>,
- <0 0xe61b0000 0 0x200>;
- clocks = <&cpg CPG_MOD 919>;
- power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 919>;
- #thermal-sensor-cells = <1>;
- };
-
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-r8a779a0",
"renesas,rcar-gen3-i2c";
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car H3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-salvator-xs.dts
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m1.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+ model = "Renesas Salvator-X 2nd version board based on r8a779m1";
+ compatible = "renesas,salvator-xs", "renesas,r8a779m1",
+ "renesas,r8a7795";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 721>,
+ <&versaclock6 1>,
+ <&x21_clk>,
+ <&x22_clk>,
+ <&versaclock6 2>;
+ clock-names = "du.0", "du.1", "du.2", "du.3",
+ "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-ulcb-kf.dts
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include "r8a779m1-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+ model = "Renesas H3ULCB Kingfisher board based on r8a779m1";
+ compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
+ "renesas,r8a779m1", "renesas,r8a7795";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) with R-Car H3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-ulcb.dts
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a779m1.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+ model = "Renesas H3ULCB board based on r8a779m1";
+ compatible = "renesas,h3ulcb", "renesas,r8a779m1", "renesas,r8a7795";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 721>,
+ <&versaclock5 1>,
+ <&versaclock5 3>,
+ <&versaclock5 4>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2", "du.3",
+ "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the R-Car H3e-2G (R8A779M1) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77951.dtsi"
+
+/ {
+ compatible = "renesas,r8a779m1", "renesas,r8a7795";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-salvator-xs.dts
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m3.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+ model = "Renesas Salvator-X 2nd version board based on r8a779m3";
+ compatible = "renesas,salvator-xs", "renesas,r8a779m3",
+ "renesas,r8a77961";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+
+ memory@480000000 {
+ device_type = "memory";
+ reg = <0x4 0x80000000 0x0 0x80000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x1 0x00000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&versaclock6 1>,
+ <&x21_clk>,
+ <&versaclock6 2>;
+ clock-names = "du.0", "du.1", "du.2",
+ "dclkin.0", "dclkin.1", "dclkin.2";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-ulcb-kf.dts
+ * Copyright (C) 2020 Eugeniu Rosca <rosca.eugeniu@gmail.com>
+ */
+
+#include "r8a779m3-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+ model = "Renesas M3ULCB Kingfisher board based on r8a779m3";
+ compatible = "shimafuji,kingfisher", "renesas,m3ulcb",
+ "renesas,r8a779m3", "renesas,r8a77961";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) with R-Car M3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-ulcb.dts
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m3.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+ model = "Renesas M3ULCB board based on r8a779m3";
+ compatible = "renesas,m3ulcb", "renesas,r8a779m3", "renesas,r8a77961";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+
+ memory@480000000 {
+ device_type = "memory";
+ reg = <0x4 0x80000000 0x0 0x80000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x1 0x00000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&versaclock5 1>,
+ <&versaclock5 3>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2",
+ "dclkin.0", "dclkin.1", "dclkin.2";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the R-Car M3e-2G (R8A779M3) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77961.dtsi"
+
+/ {
+ compatible = "renesas,r8a779m3", "renesas,r8a77961";
+};
#address-cells = <2>;
#size-cells = <2>;
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
extal_clk: extal {
compatible = "fixed-clock";
status = "disabled";
};
+ canfd: can@10050000 {
+ compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd";
+ reg = <0 0x10050000 0 0x8000>;
+ interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "g_err", "g_recc",
+ "ch0_err", "ch0_rec", "ch0_trx",
+ "ch1_err", "ch1_rec", "ch1_trx";
+ clocks = <&cpg CPG_MOD R9A07G044_CANFD_PCLK>,
+ <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>;
+ assigned-clock-rates = <50000000>;
+ resets = <&cpg R9A07G044_CANFD_RSTP_N>,
+ <&cpg R9A07G044_CANFD_RSTC_N>;
+ reset-names = "rstp_n", "rstc_n";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ channel0 {
+ status = "disabled";
+ };
+ channel1 {
+ status = "disabled";
+ };
+ };
+
+ i2c0: i2c@10058000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058000 0 0x400>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C0_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@10058400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058400 0 0x400>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C1_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@10058800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058800 0 0x400>;
+ interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C2_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@10058c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058c00 0 0x400>;
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C3_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ adc: adc@10059000 {
+ compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc";
+ reg = <0 0x10059000 0 0x400>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>,
+ <&cpg CPG_MOD R9A07G044_ADC_PCLK>;
+ clock-names = "adclk", "pclk";
+ resets = <&cpg R9A07G044_ADC_PRESETN>,
+ <&cpg R9A07G044_ADC_ADRST_N>;
+ reset-names = "presetn", "adrst-n";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ };
+ channel@1 {
+ reg = <1>;
+ };
+ channel@2 {
+ reg = <2>;
+ };
+ channel@3 {
+ reg = <3>;
+ };
+ channel@4 {
+ reg = <4>;
+ };
+ channel@5 {
+ reg = <5>;
+ };
+ channel@6 {
+ reg = <6>;
+ };
+ channel@7 {
+ reg = <7>;
+ };
+ };
+
cpg: clock-controller@11010000 {
compatible = "renesas,r9a07g044-cpg";
reg = <0 0x11010000 0 0x10000>;
status = "disabled";
};
+ pinctrl: pin-controller@11030000 {
+ compatible = "renesas,r9a07g044-pinctrl";
+ reg = <0 0x11030000 0 0x10000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 392>;
+ clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_GPIO_RSTN>,
+ <&cpg R9A07G044_GPIO_PORT_RESETN>,
+ <&cpg R9A07G044_GPIO_SPARE_RESETN>;
+ };
+
gic: interrupt-controller@11900000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
label = "rcar-sound";
dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1>; /* HDMI0 */
+ &rsnd_port1 /* HDMI0 */
+#ifdef SOC_HAS_HDMI1
+ &rsnd_port2 /* HDMI1 */
+#endif
+ >;
};
vbus0_usb2: regulator-vbus0-usb2 {
remote-endpoint = <&rcar_dw_hdmi0_out>;
};
+#ifdef SOC_HAS_HDMI1
+&hdmi1 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi1_out: endpoint {
+ remote-endpoint = <&hdmi1_con>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ dw_hdmi1_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint2>;
+ };
+ };
+ };
+};
+
+&hdmi1_con {
+ remote-endpoint = <&rcar_dw_hdmi1_out>;
+};
+#endif /* SOC_HAS_HDMI1 */
+
&hscif1 {
pinctrl-0 = <&hscif1_pins>;
pinctrl-names = "default";
playback = <&ssi2>;
};
};
+
+#ifdef SOC_HAS_HDMI1
+ rsnd_port2: port@2 {
+ reg = <2>;
+ rsnd_endpoint2: endpoint {
+ remote-endpoint = <&dw_hdmi1_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint2>;
+ frame-master = <&rsnd_endpoint2>;
+
+ playback = <&ssi3>;
+ };
+ };
+#endif /* SOC_HAS_HDMI1 */
};
};
status = "okay";
};
+#ifdef SOC_HAS_SATA
+&sata {
+ status = "okay";
+};
+#endif /* SOC_HAS_SATA */
+
&scif1 {
pinctrl-0 = <&scif1_pins>;
pinctrl-names = "default";
status = "okay";
};
+
+#ifdef SOC_HAS_USB2_CH2
+&ehci2 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&pfc {
+ usb2_pins: usb2 {
+ groups = "usb2";
+ function = "usb2";
+ };
+};
+
+&usb2_phy2 {
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+#endif /* SOC_HAS_USB2_CH2 */
clock-names = "xin";
};
};
+
+#ifdef SOC_HAS_SATA
+&pca9654 {
+ pcie-sata-switch-hog {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low; /* enable SATA by default */
+ line-name = "PCIE/SATA switch";
+ };
+};
+
+/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
+#endif /* SOC_HAS_SATA */
+
+#ifdef SOC_HAS_USB2_CH3
+&ehci3 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&hsusb3 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&ohci3 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&pfc {
+ /*
+ * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
+ * (when SW31 is the default setting on Salvator-XS).
+ * - If SW31 is the default setting, you cannot use USB2.0 ch3 on
+ * r8a77951 with Salvator-XS.
+ * Hence the SW31 setting must be changed like 2) below.
+ * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
+ * - Connect GP6_3[01] to ADV7842.
+ * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON:
+ * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power).
+ * - Connect GP6_{04,21} to ADV7842.
+ */
+ usb2_ch3_pins: usb2_ch3 {
+ groups = "usb2_ch3";
+ function = "usb2_ch3";
+ };
+};
+
+&usb2_phy3 {
+ pinctrl-0 = <&usb2_ch3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+#endif /* SOC_HAS_USB2_CH3 */
reg = <0x4044 0x8>;
#phy-cells = <1>;
};
+
+ epwm_tbclk: clock@4140 {
+ compatible = "ti,am64-epwm-tbclk", "syscon";
+ reg = <0x4130 0x4>;
+ #clock-cells = <1>;
+ };
};
main_uart0: serial@2800000 {
clock-names = "fck";
max-functions = /bits/ 8 <1>;
};
+
+ epwm0: pwm@23000000 {
+ compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x23000000 0x0 0x100>;
+ power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ epwm1: pwm@23010000 {
+ compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x23010000 0x0 0x100>;
+ power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ epwm2: pwm@23020000 {
+ compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x23020000 0x0 0x100>;
+ power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ epwm3: pwm@23030000 {
+ compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x23030000 0x0 0x100>;
+ power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&epwm_tbclk 3>, <&k3_clks 89 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ epwm4: pwm@23040000 {
+ compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x23040000 0x0 0x100>;
+ power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&epwm_tbclk 4>, <&k3_clks 90 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ epwm5: pwm@23050000 {
+ compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x23050000 0x0 0x100>;
+ power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&epwm_tbclk 5>, <&k3_clks 91 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ epwm6: pwm@23060000 {
+ compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x23060000 0x0 0x100>;
+ power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&epwm_tbclk 6>, <&k3_clks 92 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ epwm7: pwm@23070000 {
+ compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x23070000 0x0 0x100>;
+ power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&epwm_tbclk 7>, <&k3_clks 93 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ epwm8: pwm@23080000 {
+ compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x23080000 0x0 0x100>;
+ power-domains = <&k3_pds 94 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&epwm_tbclk 8>, <&k3_clks 94 0>;
+ clock-names = "tbclk", "fck";
+ };
+
+ ecap0: pwm@23100000 {
+ compatible = "ti,am64-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x0 0x23100000 0x0 0x60>;
+ power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 51 0>;
+ clock-names = "fck";
+ };
+
+ ecap1: pwm@23110000 {
+ compatible = "ti,am64-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x0 0x23110000 0x0 0x60>;
+ power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 52 0>;
+ clock-names = "fck";
+ };
+
+ ecap2: pwm@23120000 {
+ compatible = "ti,am64-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x0 0x23120000 0x0 0x60>;
+ power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 53 0>;
+ clock-names = "fck";
+ };
};
AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
>;
};
+
+ main_ecap0_pins_default: main-ecap0-pins-default {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
+ >;
+ };
};
&main_uart0 {
num-lanes = <1>;
status = "disabled";
};
+
+&ecap0 {
+ /* PWM is available on Pin 1 of header J12 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_ecap0_pins_default>;
+};
+
+&ecap1 {
+ status = "disabled";
+};
+
+&ecap2 {
+ status = "disabled";
+};
+
+&epwm0 {
+ status = "disabled";
+};
+
+&epwm1 {
+ status = "disabled";
+};
+
+&epwm2 {
+ status = "disabled";
+};
+
+&epwm3 {
+ status = "disabled";
+};
+
+&epwm4 {
+ status = "disabled";
+};
+
+&epwm5 {
+ status = "disabled";
+};
+
+&epwm6 {
+ status = "disabled";
+};
+
+&epwm7 {
+ status = "disabled";
+};
+
+&epwm8 {
+ status = "disabled";
+};
AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
>;
};
+
+ main_ecap0_pins_default: main-ecap0-pins-default {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
+ >;
+ };
};
&mcu_uart0 {
&pcie0_ep {
status = "disabled";
};
+
+&ecap0 {
+ /* PWM is available on Pin 1 of header J3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_ecap0_pins_default>;
+};
+
+&ecap1 {
+ status = "disabled";
+};
+
+&ecap2 {
+ status = "disabled";
+};
+
+&epwm0 {
+ status = "disabled";
+};
+
+&epwm1 {
+ status = "disabled";
+};
+
+&epwm2 {
+ status = "disabled";
+};
+
+&epwm3 {
+ status = "disabled";
+};
+
+&epwm4 {
+ /*
+ * EPWM4_A, EPWM4_B is available on Pin 32 and 33 on J4 (RPi hat)
+ * But RPi Hat will be used for other use cases, so marking epwm4 as disabled.
+ */
+ status = "disabled";
+};
+
+&epwm5 {
+ /*
+ * EPWM5_A, EPWM5_B is available on Pin 29 and 31 on J4 (RPi hat)
+ * But RPi Hat will be used for other use cases, so marking epwm5 as disabled.
+ */
+ status = "disabled";
+};
+
+&epwm6 {
+ status = "disabled";
+};
+
+&epwm7 {
+ status = "disabled";
+};
+
+&epwm8 {
+ status = "disabled";
+};
#define R9A07G044_CLK_P2 19
#define R9A07G044_CLK_AT 20
#define R9A07G044_OSCCLK 21
+#define R9A07G044_CLK_P0_DIV2 22
/* R9A07G044 Module Clocks */
#define R9A07G044_CA55_SCLK 0
projects / linux-2.6-microblaze.git / commitdiff