arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "sm6125.dtsi"
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/input/input.h>
  11 #include <dt-bindings/input/gpio-keys.h>
  12
  13 / {
  14         /* required for bootloader to select correct board */
  15         qcom,msm-id = <394 0x10000>; /* sm6125 v1 */
  16         qcom,board-id = <34 0>;
  17
  18         model = "Sony Xperia 10 II";
  19         compatible = "sony,pdx201", "qcom,sm6125";
  20
  21         chosen {
  22                 #address-cells = <2>;
  23                 #size-cells = <2>;
  24                 ranges;
  25
  26                 framebuffer0: framebuffer@5c000000 {
  27                         compatible = "simple-framebuffer";
  28                         reg = <0 0x5c000000 0 (2520 * 1080 * 4)>;
  29                         width = <1080>;
  30                         height = <2520>;
  31                         stride = <(1080 * 4)>;
  32                         format = "a8r8g8b8";
  33                 };
  34         };
  35
  36         extcon_usb: extcon-usb {
  37                 compatible = "linux,extcon-usb-gpio";
  38                 id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
  39         };
  40
  41         gpio-keys {
  42                 status = "okay";
  43                 compatible = "gpio-keys";
  44                 input-name = "gpio-keys";
  45                 #address-cells = <1>;
  46                 #size-cells = <0>;
  47                 autorepeat;
  48
  49                 vol-dn {
  50                         label = "Volume Down";
  51                         gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
  52                         linux,input-type = <1>;
  53                         linux,code = <KEY_VOLUMEDOWN>;
  54                         gpio-key,wakeup;
  55                         debounce-interval = <15>;
  56                 };
  57         };
  58
  59         reserved_memory {
  60                 #address-cells = <2>;
  61                 #size-cells = <2>;
  62                 debug_mem: memory@ffb00000 {
  63                         reg = <0x0 0xffb00000 0x0 0xc0000>;
  64                         no-map;
  65                 };
  66
  67                 last_log_mem: memory@ffbc0000 {
  68                         reg = <0x0 0xffbc0000 0x0 0x80000>;
  69                         no-map;
  70                 };
  71
  72                 pstore_mem: ramoops@ffc00000 {
  73                         compatible = "ramoops";
  74                         reg = <0x0 0xffc40000 0x0 0xc0000>;
  75                         record-size = <0x1000>;
  76                         console-size = <0x40000>;
  77                         msg-size = <0x20000 0x20000>;
  78                 };
  79
  80                 cmdline_mem: memory@ffd00000 {
  81                         reg = <0x0 0xffd40000 0x0 0x1000>;
  82                         no-map;
  83                 };
  84         };
  85 };
  86
  87 &hsusb_phy1 {
  88         status = "okay";
  89 };
  90
  91 &sdc2_state_off {
  92         sd-cd {
  93                 pins = "gpio98";
  94                 bias-disable;
  95                 drive-strength = <2>;
  96         };
  97 };
  98
  99 &sdhc_1 {
 100         status = "okay";
 101 };
 102
 103 &tlmm {
 104         gpio-reserved-ranges = <22 2>, <28 6>;
 105
 106         sdc2_state_on: sdc2-on {
 107                 clk {
 108                         pins = "sdc2_clk";
 109                         bias-disable;
 110                         drive-strength = <16>;
 111                 };
 112
 113                 cmd {
 114                         pins = "sdc2_cmd";
 115                         bias-pull-up;
 116                         drive-strength = <10>;
 117                 };
 118
 119                 data {
 120                         pins = "sdc2_data";
 121                         bias-pull-up;
 122                         drive-strength = <10>;
 123                 };
 124
 125                 sd-cd {
 126                         pins = "gpio98";
 127                         bias-pull-up;
 128                         drive-strength = <2>;
 129                 };
 130         };
 131 };
 132
 133 &usb3 {
 134         status = "okay";
 135 };
 136
 137 &usb3_dwc3 {
 138         extcon = <&extcon_usb>;
 139 };