ARM: dts: am33xx-l4: add dt node for new cpsw switchdev driver

Add DT node for the new cpsw switchdev based driver.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index cb164df..cbc9309 100644 (file)
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -751,6 +751,55 @@
                                        phys = <&phy_gmii_sel 2 1>;
                                };
                        };
+
+                       mac_sw: switch@0 {
+                               compatible = "ti,am335x-cpsw-switch", "ti,cpsw-switch";
+                               reg = <0x0 0x4000>;
+                               ranges = <0 0 0x4000>;
+                               clocks = <&cpsw_125mhz_gclk>;
+                               clock-names = "fck";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               syscon = <&scm_conf>;
+                               status = "disabled";
+
+                               interrupts = <40 41 42 43>;
+                               interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+                               ethernet-ports {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       cpsw_port1: port@1 {
+                                               reg = <1>;
+                                               label = "port1";
+                                               mac-address = [ 00 00 00 00 00 00 ];
+                                               phys = <&phy_gmii_sel 1 1>;
+                                       };
+
+                                       cpsw_port2: port@2 {
+                                               reg = <2>;
+                                               label = "port2";
+                                               mac-address = [ 00 00 00 00 00 00 ];
+                                               phys = <&phy_gmii_sel 2 1>;
+                                       };
+                               };
+
+                               davinci_mdio_sw: mdio@1000 {
+                                       compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+                                       clocks = <&cpsw_125mhz_gclk>;
+                                       clock-names = "fck";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       bus_freq = <1000000>;
+                                       reg = <0x1000 0x100>;
+                               };
+
+                               cpts {
+                                       clocks = <&cpsw_cpts_rft_clk>;
+                                       clock-names = "cpts";
+                               };
+                       };
                };
 
                target-module@180000 {                  /* 0x4a180000, ap 5 10.0 */