arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 // Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
   3
   4 /dts-v1/;
   5
   6 #include "sun50i-h6.dtsi"
   7 #include "sun50i-h6-cpu-opp.dtsi"
   8
   9 #include <dt-bindings/gpio/gpio.h>
  10
  11 / {
  12         model = "Beelink GS1";
  13         compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
  14
  15         aliases {
  16                 ethernet0 = &emac;
  17                 serial0 = &uart0;
  18         };
  19
  20         chosen {
  21                 stdout-path = "serial0:115200n8";
  22         };
  23
  24         connector {
  25                 compatible = "hdmi-connector";
  26                 type = "a";
  27                 ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
  28
  29                 port {
  30                         hdmi_con_in: endpoint {
  31                                 remote-endpoint = <&hdmi_out_con>;
  32                         };
  33                 };
  34         };
  35
  36         ext_osc32k: ext_osc32k_clk {
  37                 #clock-cells = <0>;
  38                 compatible = "fixed-clock";
  39                 clock-frequency = <32768>;
  40                 clock-output-names = "ext_osc32k";
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 led {
  47                         label = "beelink:white:power";
  48                         gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
  49                         default-state = "on";
  50                 };
  51         };
  52
  53         reg_vcc5v: vcc5v {
  54                 /* board wide 5V supply directly from the DC jack */
  55                 compatible = "regulator-fixed";
  56                 regulator-name = "vcc-5v";
  57                 regulator-min-microvolt = <5000000>;
  58                 regulator-max-microvolt = <5000000>;
  59                 regulator-always-on;
  60         };
  61
  62         sound-spdif {
  63                 compatible = "simple-audio-card";
  64                 simple-audio-card,name = "sun50i-h6-spdif";
  65
  66                 simple-audio-card,cpu {
  67                         sound-dai = <&spdif>;
  68                 };
  69
  70                 simple-audio-card,codec {
  71                         sound-dai = <&spdif_out>;
  72                 };
  73         };
  74
  75         spdif_out: spdif-out {
  76                 #sound-dai-cells = <0>;
  77                 compatible = "linux,spdif-dit";
  78         };
  79 };
  80
  81 &cpu0 {
  82         cpu-supply = <&reg_dcdca>;
  83 };
  84
  85 &de {
  86         status = "okay";
  87 };
  88
  89 &dwc3 {
  90         status = "okay";
  91 };
  92
  93 &ehci0 {
  94         status = "okay";
  95 };
  96
  97 &emac {
  98         pinctrl-names = "default";
  99         pinctrl-0 = <&ext_rgmii_pins>;
 100         phy-mode = "rgmii-id";
 101         phy-handle = <&ext_rgmii_phy>;
 102         phy-supply = <&reg_aldo2>;
 103         status = "okay";
 104 };
 105
 106 &gpu {
 107         mali-supply = <&reg_dcdcc>;
 108         status = "okay";
 109 };
 110
 111 &hdmi {
 112         status = "okay";
 113 };
 114
 115 &hdmi_out {
 116         hdmi_out_con: endpoint {
 117                 remote-endpoint = <&hdmi_con_in>;
 118         };
 119 };
 120
 121 &mdio {
 122         ext_rgmii_phy: ethernet-phy@1 {
 123                 compatible = "ethernet-phy-ieee802.3-c22";
 124                 reg = <1>;
 125         };
 126 };
 127
 128 &mmc0 {
 129         vmmc-supply = <&reg_cldo1>;
 130         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 131         bus-width = <4>;
 132         status = "okay";
 133 };
 134
 135 &mmc2 {
 136         vmmc-supply = <&reg_cldo1>;
 137         vqmmc-supply = <&reg_bldo2>;
 138         non-removable;
 139         cap-mmc-hw-reset;
 140         bus-width = <8>;
 141         status = "okay";
 142 };
 143
 144 &ohci0 {
 145         status = "okay";
 146 };
 147
 148 &pio {
 149         vcc-pd-supply = <&reg_cldo1>;
 150         vcc-pg-supply = <&reg_aldo1>;
 151 };
 152
 153 &r_ir {
 154         linux,rc-map-name = "rc-beelink-gs1";
 155         status = "okay";
 156 };
 157
 158 &r_pio {
 159         /*
 160          * FIXME: We can't add that supply for now since it would
 161          * create a circular dependency between pinctrl, the regulator
 162          * and the RSB Bus.
 163          *
 164          * vcc-pl-supply = <&reg_aldo1>;
 165          */
 166         vcc-pm-supply = <&reg_aldo1>;
 167 };
 168
 169 &r_rsb {
 170         status = "okay";
 171
 172         axp805: pmic@745 {
 173                 compatible = "x-powers,axp805", "x-powers,axp806";
 174                 reg = <0x745>;
 175                 interrupt-parent = <&r_intc>;
 176                 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 177                 interrupt-controller;
 178                 #interrupt-cells = <1>;
 179                 x-powers,self-working-mode;
 180                 vina-supply = <&reg_vcc5v>;
 181                 vinb-supply = <&reg_vcc5v>;
 182                 vinc-supply = <&reg_vcc5v>;
 183                 vind-supply = <&reg_vcc5v>;
 184                 vine-supply = <&reg_vcc5v>;
 185                 aldoin-supply = <&reg_vcc5v>;
 186                 bldoin-supply = <&reg_vcc5v>;
 187                 cldoin-supply = <&reg_vcc5v>;
 188
 189                 regulators {
 190                         reg_aldo1: aldo1 {
 191                                 regulator-always-on;
 192                                 regulator-min-microvolt = <3300000>;
 193                                 regulator-max-microvolt = <3300000>;
 194                                 regulator-name = "vcc-pl";
 195                         };
 196
 197                         reg_aldo2: aldo2 {
 198                                 regulator-min-microvolt = <3300000>;
 199                                 regulator-max-microvolt = <3300000>;
 200                                 regulator-name = "vcc-ac200";
 201                                 regulator-enable-ramp-delay = <100000>;
 202                         };
 203
 204                         reg_aldo3: aldo3 {
 205                                 regulator-always-on;
 206                                 regulator-min-microvolt = <3300000>;
 207                                 regulator-max-microvolt = <3300000>;
 208                                 regulator-name = "vcc25-dram";
 209                         };
 210
 211                         reg_bldo1: bldo1 {
 212                                 regulator-always-on;
 213                                 regulator-min-microvolt = <1800000>;
 214                                 regulator-max-microvolt = <1800000>;
 215                                 regulator-name = "vcc-bias-pll";
 216                         };
 217
 218                         reg_bldo2: bldo2 {
 219                                 regulator-always-on;
 220                                 regulator-min-microvolt = <1800000>;
 221                                 regulator-max-microvolt = <1800000>;
 222                                 regulator-name = "vcc-efuse-pcie-hdmi-io";
 223                         };
 224
 225                         reg_bldo3: bldo3 {
 226                                 regulator-always-on;
 227                                 regulator-min-microvolt = <1800000>;
 228                                 regulator-max-microvolt = <1800000>;
 229                                 regulator-name = "vcc-dcxoio";
 230                         };
 231
 232                         bldo4 {
 233                                 /* unused */
 234                         };
 235
 236                         reg_cldo1: cldo1 {
 237                                 regulator-always-on;
 238                                 regulator-min-microvolt = <3300000>;
 239                                 regulator-max-microvolt = <3300000>;
 240                                 regulator-name = "vcc-3v3";
 241                         };
 242
 243                         reg_cldo2: cldo2 {
 244                                 regulator-min-microvolt = <3300000>;
 245                                 regulator-max-microvolt = <3300000>;
 246                                 regulator-name = "vcc-wifi-1";
 247                         };
 248
 249                         reg_cldo3: cldo3 {
 250                                 regulator-min-microvolt = <3300000>;
 251                                 regulator-max-microvolt = <3300000>;
 252                                 regulator-name = "vcc-wifi-2";
 253                         };
 254
 255                         reg_dcdca: dcdca {
 256                                 regulator-always-on;
 257                                 regulator-min-microvolt = <810000>;
 258                                 regulator-max-microvolt = <1160000>;
 259                                 regulator-ramp-delay = <2500>;
 260                                 regulator-name = "vdd-cpu";
 261                         };
 262
 263                         reg_dcdcc: dcdcc {
 264                                 regulator-enable-ramp-delay = <32000>;
 265                                 regulator-min-microvolt = <810000>;
 266                                 regulator-max-microvolt = <1080000>;
 267                                 regulator-ramp-delay = <2500>;
 268                                 regulator-name = "vdd-gpu";
 269                         };
 270
 271                         reg_dcdcd: dcdcd {
 272                                 regulator-always-on;
 273                                 regulator-min-microvolt = <960000>;
 274                                 regulator-max-microvolt = <960000>;
 275                                 regulator-name = "vdd-sys";
 276                         };
 277
 278                         reg_dcdce: dcdce {
 279                                 regulator-always-on;
 280                                 regulator-min-microvolt = <1200000>;
 281                                 regulator-max-microvolt = <1200000>;
 282                                 regulator-name = "vcc-dram";
 283                         };
 284
 285                         sw {
 286                                 /* unused */
 287                         };
 288                 };
 289         };
 290 };
 291
 292 &spdif {
 293         status = "okay";
 294 };
 295
 296 &uart0 {
 297         pinctrl-names = "default";
 298         pinctrl-0 = <&uart0_ph_pins>;
 299         status = "okay";
 300 };
 301
 302 &usb2otg {
 303         dr_mode = "host";
 304         status = "okay";
 305 };
 306
 307 &usb2phy {
 308         usb0_vbus-supply = <&reg_vcc5v>;
 309         status = "okay";
 310 };
 311
 312 &usb3phy {
 313         status = "okay";
 314 };