arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 // Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
   3
   4 /dts-v1/;
   5
   6 #include "sun50i-h6.dtsi"
   7 #include "sun50i-h6-cpu-opp.dtsi"
   8 #include "sun50i-h6-gpu-opp.dtsi"
   9
  10 #include <dt-bindings/gpio/gpio.h>
  11
  12 / {
  13         model = "Beelink GS1";
  14         compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
  15
  16         aliases {
  17                 ethernet0 = &emac;
  18                 serial0 = &uart0;
  19         };
  20
  21         chosen {
  22                 stdout-path = "serial0:115200n8";
  23         };
  24
  25         connector {
  26                 compatible = "hdmi-connector";
  27                 type = "a";
  28                 ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
  29
  30                 port {
  31                         hdmi_con_in: endpoint {
  32                                 remote-endpoint = <&hdmi_out_con>;
  33                         };
  34                 };
  35         };
  36
  37         ext_osc32k: ext_osc32k_clk {
  38                 #clock-cells = <0>;
  39                 compatible = "fixed-clock";
  40                 clock-frequency = <32768>;
  41                 clock-output-names = "ext_osc32k";
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46
  47                 led {
  48                         label = "beelink:white:power";
  49                         gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
  50                         default-state = "on";
  51                 };
  52         };
  53
  54         reg_vcc5v: vcc5v {
  55                 /* board wide 5V supply directly from the DC jack */
  56                 compatible = "regulator-fixed";
  57                 regulator-name = "vcc-5v";
  58                 regulator-min-microvolt = <5000000>;
  59                 regulator-max-microvolt = <5000000>;
  60                 regulator-always-on;
  61         };
  62
  63         sound-spdif {
  64                 compatible = "simple-audio-card";
  65                 simple-audio-card,name = "sun50i-h6-spdif";
  66
  67                 simple-audio-card,cpu {
  68                         sound-dai = <&spdif>;
  69                 };
  70
  71                 simple-audio-card,codec {
  72                         sound-dai = <&spdif_out>;
  73                 };
  74         };
  75
  76         spdif_out: spdif-out {
  77                 #sound-dai-cells = <0>;
  78                 compatible = "linux,spdif-dit";
  79         };
  80 };
  81
  82 &cpu0 {
  83         cpu-supply = <&reg_dcdca>;
  84 };
  85
  86 &de {
  87         status = "okay";
  88 };
  89
  90 &dwc3 {
  91         status = "okay";
  92 };
  93
  94 &ehci0 {
  95         status = "okay";
  96 };
  97
  98 &emac {
  99         pinctrl-names = "default";
 100         pinctrl-0 = <&ext_rgmii_pins>;
 101         phy-mode = "rgmii-id";
 102         phy-handle = <&ext_rgmii_phy>;
 103         phy-supply = <&reg_aldo2>;
 104         status = "okay";
 105 };
 106
 107 &gpu {
 108         mali-supply = <&reg_dcdcc>;
 109         status = "okay";
 110 };
 111
 112 &hdmi {
 113         status = "okay";
 114 };
 115
 116 &hdmi_out {
 117         hdmi_out_con: endpoint {
 118                 remote-endpoint = <&hdmi_con_in>;
 119         };
 120 };
 121
 122 &mdio {
 123         ext_rgmii_phy: ethernet-phy@1 {
 124                 compatible = "ethernet-phy-ieee802.3-c22";
 125                 reg = <1>;
 126         };
 127 };
 128
 129 &mmc0 {
 130         vmmc-supply = <&reg_cldo1>;
 131         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 132         bus-width = <4>;
 133         status = "okay";
 134 };
 135
 136 &mmc2 {
 137         vmmc-supply = <&reg_cldo1>;
 138         vqmmc-supply = <&reg_bldo2>;
 139         non-removable;
 140         cap-mmc-hw-reset;
 141         bus-width = <8>;
 142         status = "okay";
 143 };
 144
 145 &ohci0 {
 146         status = "okay";
 147 };
 148
 149 &pio {
 150         vcc-pd-supply = <&reg_cldo1>;
 151         vcc-pg-supply = <&reg_aldo1>;
 152 };
 153
 154 &r_ir {
 155         linux,rc-map-name = "rc-beelink-gs1";
 156         status = "okay";
 157 };
 158
 159 &r_pio {
 160         /*
 161          * FIXME: We can't add that supply for now since it would
 162          * create a circular dependency between pinctrl, the regulator
 163          * and the RSB Bus.
 164          *
 165          * vcc-pl-supply = <&reg_aldo1>;
 166          */
 167         vcc-pm-supply = <&reg_aldo1>;
 168 };
 169
 170 &r_rsb {
 171         status = "okay";
 172
 173         axp805: pmic@745 {
 174                 compatible = "x-powers,axp805", "x-powers,axp806";
 175                 reg = <0x745>;
 176                 interrupt-parent = <&r_intc>;
 177                 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 178                 interrupt-controller;
 179                 #interrupt-cells = <1>;
 180                 x-powers,self-working-mode;
 181                 vina-supply = <&reg_vcc5v>;
 182                 vinb-supply = <&reg_vcc5v>;
 183                 vinc-supply = <&reg_vcc5v>;
 184                 vind-supply = <&reg_vcc5v>;
 185                 vine-supply = <&reg_vcc5v>;
 186                 aldoin-supply = <&reg_vcc5v>;
 187                 bldoin-supply = <&reg_vcc5v>;
 188                 cldoin-supply = <&reg_vcc5v>;
 189
 190                 regulators {
 191                         reg_aldo1: aldo1 {
 192                                 regulator-always-on;
 193                                 regulator-min-microvolt = <3300000>;
 194                                 regulator-max-microvolt = <3300000>;
 195                                 regulator-name = "vcc-pl";
 196                         };
 197
 198                         reg_aldo2: aldo2 {
 199                                 regulator-min-microvolt = <3300000>;
 200                                 regulator-max-microvolt = <3300000>;
 201                                 regulator-name = "vcc-ac200";
 202                                 regulator-enable-ramp-delay = <100000>;
 203                         };
 204
 205                         reg_aldo3: aldo3 {
 206                                 regulator-always-on;
 207                                 regulator-min-microvolt = <3300000>;
 208                                 regulator-max-microvolt = <3300000>;
 209                                 regulator-name = "vcc25-dram";
 210                         };
 211
 212                         reg_bldo1: bldo1 {
 213                                 regulator-always-on;
 214                                 regulator-min-microvolt = <1800000>;
 215                                 regulator-max-microvolt = <1800000>;
 216                                 regulator-name = "vcc-bias-pll";
 217                         };
 218
 219                         reg_bldo2: bldo2 {
 220                                 regulator-always-on;
 221                                 regulator-min-microvolt = <1800000>;
 222                                 regulator-max-microvolt = <1800000>;
 223                                 regulator-name = "vcc-efuse-pcie-hdmi-io";
 224                         };
 225
 226                         reg_bldo3: bldo3 {
 227                                 regulator-always-on;
 228                                 regulator-min-microvolt = <1800000>;
 229                                 regulator-max-microvolt = <1800000>;
 230                                 regulator-name = "vcc-dcxoio";
 231                         };
 232
 233                         bldo4 {
 234                                 /* unused */
 235                         };
 236
 237                         reg_cldo1: cldo1 {
 238                                 regulator-always-on;
 239                                 regulator-min-microvolt = <3300000>;
 240                                 regulator-max-microvolt = <3300000>;
 241                                 regulator-name = "vcc-3v3";
 242                         };
 243
 244                         reg_cldo2: cldo2 {
 245                                 regulator-min-microvolt = <3300000>;
 246                                 regulator-max-microvolt = <3300000>;
 247                                 regulator-name = "vcc-wifi-1";
 248                         };
 249
 250                         reg_cldo3: cldo3 {
 251                                 regulator-min-microvolt = <3300000>;
 252                                 regulator-max-microvolt = <3300000>;
 253                                 regulator-name = "vcc-wifi-2";
 254                         };
 255
 256                         reg_dcdca: dcdca {
 257                                 regulator-always-on;
 258                                 regulator-min-microvolt = <810000>;
 259                                 regulator-max-microvolt = <1160000>;
 260                                 regulator-ramp-delay = <2500>;
 261                                 regulator-name = "vdd-cpu";
 262                         };
 263
 264                         reg_dcdcc: dcdcc {
 265                                 regulator-enable-ramp-delay = <32000>;
 266                                 regulator-min-microvolt = <810000>;
 267                                 regulator-max-microvolt = <1080000>;
 268                                 regulator-ramp-delay = <2500>;
 269                                 regulator-name = "vdd-gpu";
 270                         };
 271
 272                         reg_dcdcd: dcdcd {
 273                                 regulator-always-on;
 274                                 regulator-min-microvolt = <960000>;
 275                                 regulator-max-microvolt = <960000>;
 276                                 regulator-name = "vdd-sys";
 277                         };
 278
 279                         reg_dcdce: dcdce {
 280                                 regulator-always-on;
 281                                 regulator-min-microvolt = <1200000>;
 282                                 regulator-max-microvolt = <1200000>;
 283                                 regulator-name = "vcc-dram";
 284                         };
 285
 286                         sw {
 287                                 /* unused */
 288                         };
 289                 };
 290         };
 291 };
 292
 293 &spdif {
 294         pinctrl-names = "default";
 295         pinctrl-0 = <&spdif_tx_pin>;
 296         status = "okay";
 297 };
 298
 299 &uart0 {
 300         pinctrl-names = "default";
 301         pinctrl-0 = <&uart0_ph_pins>;
 302         status = "okay";
 303 };
 304
 305 &usb2otg {
 306         dr_mode = "host";
 307         status = "okay";
 308 };
 309
 310 &usb2phy {
 311         usb0_vbus-supply = <&reg_vcc5v>;
 312         status = "okay";
 313 };
 314
 315 &usb3phy {
 316         status = "okay";
 317 };