Arnd Bergmann [Fri, 27 Nov 2020 17:03:16 +0000 (18:03 +0100)]
Merge tag 'tegra-for-5.11-dt-bindings' of git://git./linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.11-rc1
This contains a couple of conversions of bindings to json-schema, as
well as symbolic names for the various memory clients on Tegra20,
Tegra30 and Tegra124. There's also a couple of fixes for Tegra194
pinmux and ARM GIC bindings. Finally, a new vendor prefix is added
for Ouya and the Ouya game console compatible string is defined.
* tag 'tegra-for-5.11-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: bus: Convert ACONNECT doc to json-schema
dt-bindings: interrupt-controller: arm,gic: Update Tegra compatibles
dt-bindings: dma: Convert ADMA doc to json-schema
dt-bindings: Fix entry name for I/O High Voltage property
dt-bindings: ARM: tegra: Add Ouya game console
dt-bindings: Add vendor prefix for Ouya Inc.
dt-bindings: memory: tegra124: Add memory client IDs
dt-bindings: memory: tegra30: Add memory client IDs
dt-bindings: memory: tegra20: Add memory client IDs
Link: https://lore.kernel.org/r/20201127144329.124891-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 27 Nov 2020 17:02:45 +0000 (18:02 +0100)]
Merge tag 'renesas-arm-dt-for-v5.11-tag2' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.11 (take two)
- PCIe endpoint support for the R-Car H3 ES2.0+ SoC.
* tag 'renesas-arm-dt-for-v5.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a77951: Add PCIe EP nodes
Link: https://lore.kernel.org/r/20201127132155.77418-2-geert@linux-m68k.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 27 Nov 2020 17:00:07 +0000 (18:00 +0100)]
Merge tag 'stm32-dt-for-v5.11-1' of git://git./linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.11, round 1
Highlights:
----------
MCU part:
-Fix dmamux reg property (length) on stm32h743.
-Explicitly set DCMI bus type on stm32429i eval board.
MPU part:
-Enable FIFO mode with half-full threshold for DCMI.
-Harmonize EHCI/OHCI nodes.
-Move SDMMC IP version to v2.0 to get features improvements.
-Add LP-timer wakeup support.
-Enable crypto/hash/crc support.
-Explicitly set DCMI bus type on stm32mp157 eval board.
-Add USB type-c controller (STUSB1600) on stm32mp15 DK boards
(It is connected to I2C4).
-Fix dmamux reg property (length) on stm32mp151.
-Optimize USB OTG FIFO sizes on stm32mp151.
-Declare tamp node also as "simple-mfd".
-LXA:
-Document Octavo vendor-prefixes yaml file.
-Document lxa,stm32mp157c-mc1 in STM32 yaml file.
-DH:
-Connect PHY IRQ line on DH SoM.
-Add KS8851 Ethernet support on DHCOM which is mapped to FMC2.
-Document all DH compatible strings in STM32 yaml file.
-Add DHCOM based PicoITX board. This board embedds ethernet port,
USB, CAN LEDS and a custom board-to-board connector.
* tag 'stm32-dt-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
ARM: dts: stm32: lxa-mc1: add OSD32MP15x to list of compatibles
dt-bindings: arm: stm32: add extra SiP compatible for lxa,stm32mp157c-mc1
dt-bindings: vendor-prefixes: document Octavo Systems oct prefix
ARM: dts: stm32: Add DHCOM based PicoITX board
dt-bindings: arm: stm32: Add compatible strings for DH SoMs and boards
ARM: dts: stm32: support child mfd cells for the stm32mp1 TAMP syscon
dt-bindings: arm: stm32: add simple-mfd compatible for tamp node
ARM: dts: stm32: update stm32mp151 for remote proc synchronization support
ARM: dts: stm32: adjust USB OTG gadget fifo sizes in stm32mp151
ARM: dts: stm32: fix dmamux reg property on stm32h743
ARM: dts: stm32: fix dmamux reg property on stm32mp151
ARM: dts: stm32: fix mdma1 clients channel priority level on stm32mp151
ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx
dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller
dt-bindings: connector: add typec-power-opmode property to usb-connector
ARM: dts: stm32: reorder spi4 within stm32mp15-pinctrl
ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval board
ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 board
ARM: dts: stm32: enable CRYP by default on stm32mp15
ARM: dts: stm32: enable CRC1 by default on stm32mp15
...
Link: https://lore.kernel.org/r/873c17a5-28d5-9261-f691-1b917611c932@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 27 Nov 2020 16:58:27 +0000 (17:58 +0100)]
Merge tag 'omap-for-v5.11/dt-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.11 merge window
- Two non-urgent pandaboard updates to get gpio button and bluetooth
working on pandaboard-es
- Updates to follow devicetree binding docs for dwc3 and pwm-leds
- Add initial support for droid bionic based on what we have for droid4
- Add second sha instance for dra7
- Add eQEP nodes for am335x for boneblue
- Fix wrong comments for am335x gpio_31
* tag 'omap-for-v5.11/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x: Fix comments for AM335X_PIN_GPMC_WPN pin in GPIO mode
ARM: dts: am335x-boneblue: Enable eQEP
ARM: dts: am33xx: Add nodes for eQEP
ARM: dts: dra7: add second SHA instance
ARM: dts: xt875: add section for kionix kxtf9
ARM: dts: mapphone: separate out xt894 specific things
ARM: dts: omap: Fix schema warnings for pwm-leds
ARM: dts: omap5: Harmonize DWC USB3 DT nodes name
ARM: dts: am437x: Correct DWC USB3 compatible string
ARM: dts: pandaboard es: add bluetooth uart for HCI
ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ES
Link: https://lore.kernel.org/r/pull-1606462656-588116@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Yuya Hamamachi [Wed, 25 Nov 2020 07:33:03 +0000 (16:33 +0900)]
arm64: dts: renesas: r8a77951: Add PCIe EP nodes
Add PCIe EP nodes for R8A77951 SoC dtsi.
Signed-off-by: Yuya Hamamachi <yuya.hamamachi.sx@renesas.com>
Link: https://lore.kernel.org/r/20201125073303.19057-3-yuya.hamamachi.sx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Arnd Bergmann [Thu, 26 Nov 2020 21:11:52 +0000 (22:11 +0100)]
Merge tag 'hisi-arm64-dt-for-5.11' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon ARM64 DT updates for 5.11
- Cleanups of the hisilicon DTS to align with the dtschema. All of them do not
have any functional effect except passing dtschema checks or dtc W=2 builds.
* tag 'hisi-arm64-dt-for-5.11' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: Use generic "ngpios" rather than "snps,nr-gpios"
arm64: dts: hi3660: Harmonize DWC USB3 DT nodes name
arm64: dts: hisilicon: list all clocks required by snps-dw-apb-uart.yaml
arm64: dts: hisilicon: list all clocks required by pl011.yaml
arm64: dts: hisilicon: list all clocks required by spi-pl022.yaml
arm64: dts: hisilicon: normalize the node name of the UART devices
arm64: dts: hisilicon: normalize the node name of the usb devices
arm64: dts: hisilicon: normalize the node name of the SMMU devices
arm64: dts: hisilicon: place clock-names "biu" before "ciu"
arm64: dts: hisilicon: remove unused property pinctrl-names
arm64: dts: hisilicon: write the values of property-units into a uint32 array
arm64: dts: hisilicon: separate each group of data in the property "reg"
arm64: dts: hisilicon: normalize the node name of the ITS devices
Link: https://lore.kernel.org/r/5FBDC416.5060008@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 26 Nov 2020 21:09:35 +0000 (22:09 +0100)]
Merge tag 'hisi-arm32-dt-for-5.11' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM: DT: Hisilicon ARM32 DT updates for 5.11
- Cleanups of the hisilicon DTS to align with the dtschema including
serial, usb, amba-bus, memory, mmc, spi and syscon. All of them do not
have any functional effect except passing dtschema checks or dtc W=2
builds.
* tag 'hisi-arm32-dt-for-5.11' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: fix errors detected by syscon.yaml
ARM: dts: hisilicon: fix errors detected by spi-pl022.yaml
ARM: dts: hisilicon: fix errors detected by synopsys-dw-mshc.yaml
ARM: dts: hisilicon: fix errors detected by root-node.yaml
ARM: dts: hisilicon: fix errors detected by simple-bus.yaml
ARM: dts: hisilicon: fix errors detected by usb yaml
ARM: dts: hisilicon: fix errors detected by pl011.yaml
ARM: dts: hisilicon: fix errors detected by snps-dw-apb-uart.yaml
Link: https://lore.kernel.org/r/5FBDC347.4050102@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Sameer Pujar [Fri, 6 Nov 2020 15:43:33 +0000 (21:13 +0530)]
dt-bindings: bus: Convert ACONNECT doc to json-schema
Move ACONNECT documentation to YAML format.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sameer Pujar [Fri, 6 Nov 2020 15:43:32 +0000 (21:13 +0530)]
dt-bindings: interrupt-controller: arm,gic: Update Tegra compatibles
Update Tegra compatibles to support newer Tegra chips and required
combinations.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sameer Pujar [Fri, 6 Nov 2020 15:43:31 +0000 (21:13 +0530)]
dt-bindings: dma: Convert ADMA doc to json-schema
Move ADMA documentation to YAML format.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Vidya Sagar [Mon, 26 Oct 2020 06:39:01 +0000 (12:09 +0530)]
dt-bindings: Fix entry name for I/O High Voltage property
Correct the name of the I/O High Voltage Property from
'nvidia,io-high-voltage' to 'nvidia,io-hv'.
Fixes:
2585a584f844 ("pinctrl: Add Tegra194 pinctrl DT bindings")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Peter Geis [Sun, 4 Oct 2020 13:31:14 +0000 (13:31 +0000)]
dt-bindings: ARM: tegra: Add Ouya game console
Add a binding for the Tegra30-based Ouya game console.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Peter Geis [Sun, 4 Oct 2020 13:31:13 +0000 (13:31 +0000)]
dt-bindings: Add vendor prefix for Ouya Inc.
Ouya is a defunct company from 2012 to 2015.
They produced a single device, the Ouya game console.
In 2015 they were purchased by Razer Inc. and the Ouya was discontinued.
All Ouya services were shuttered in 2019.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Dmitry Osipenko [Wed, 4 Nov 2020 16:48:55 +0000 (19:48 +0300)]
dt-bindings: memory: tegra124: Add memory client IDs
Each memory client has unique hardware ID, add these IDs.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Dmitry Osipenko [Wed, 4 Nov 2020 16:48:54 +0000 (19:48 +0300)]
dt-bindings: memory: tegra30: Add memory client IDs
Each memory client has unique hardware ID, add these IDs.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Dmitry Osipenko [Wed, 4 Nov 2020 16:48:53 +0000 (19:48 +0300)]
dt-bindings: memory: tegra20: Add memory client IDs
Each memory client has unique hardware ID, add these IDs.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Ahmad Fatoum [Tue, 10 Nov 2020 10:25:51 +0000 (11:25 +0100)]
ARM: dts: stm32: lxa-mc1: add OSD32MP15x to list of compatibles
Earlier commit modified the binding, so the SiP is to be specified
as well. Adjust the device tree accordingly.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Ahmad Fatoum [Tue, 10 Nov 2020 10:25:50 +0000 (11:25 +0100)]
dt-bindings: arm: stm32: add extra SiP compatible for lxa,stm32mp157c-mc1
The Linux Automation MC-1 is built around an OSD32MP15x SiP with CPU,
RAM, PMIC, Oscillator and EEPROM. Adjust the binding, so the SiP
compatible is contained as well. This allows boot firmware to match
against it to apply fixups if necessary.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Ahmad Fatoum [Tue, 10 Nov 2020 10:25:49 +0000 (11:25 +0100)]
dt-bindings: vendor-prefixes: document Octavo Systems oct prefix
Octavo Systems is an American company specializing in design and
manufacturing of System-in-Package devices.
The prefix is already in use for the Octavo Systems OSD3358-SM-RED
device tree, but was so far undocumented. Fix this.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Neeraj Dantu <neeraj.dantu@octavosystems.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Marek Vasut [Tue, 3 Nov 2020 18:11:37 +0000 (19:11 +0100)]
ARM: dts: stm32: Add DHCOM based PicoITX board
Add DT for DH PicoITX unit, which is a bare-bones carrier board for
the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom
board-to-board expansion connector.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Marek Vasut [Sun, 8 Nov 2020 22:14:38 +0000 (23:14 +0100)]
dt-bindings: arm: stm32: Add compatible strings for DH SoMs and boards
Document devicetree compatible strings of the DH SoMs and boards.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Ahmad Fatoum [Wed, 21 Oct 2020 10:28:56 +0000 (12:28 +0200)]
ARM: dts: stm32: support child mfd cells for the stm32mp1 TAMP syscon
The stm32mp1 TAMP peripheral has 32 backup registers that survive
a warm reset. This makes them suitable for storing a reboot
mode, which the vendor's kernel tree is already doing[0].
The actual syscon-reboot-mode child node can be added by a board.dts or
fixed up by the bootloader. For the child node to be probed, the
compatible needs to include simple-mfd. The binding now specifies this,
so have the SoC dtsi adhere to it.
[0]: https://github.com/STMicroelectronics/linux/commit/
2e9bfc29dd
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Ahmad Fatoum [Wed, 21 Oct 2020 10:28:55 +0000 (12:28 +0200)]
dt-bindings: arm: stm32: add simple-mfd compatible for tamp node
The stm32mp1 TAMP (Tamper and backup registers) does tamper detection
and features 32 backup registers that, being in the RTC domain, may
survive even with Vdd switched off.
This makes it suitable for use to communicate a reboot mode from OS
to bootloader via the syscon-reboot-mode binding. Add a "simple-mfd"
to support probing such a child node. The actual reboot mode
node could then be defined in a board.dts or fixed up by the bootloader.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Arnaud Pouliquen [Wed, 14 Oct 2020 12:54:41 +0000 (14:54 +0200)]
ARM: dts: stm32: update stm32mp151 for remote proc synchronization support
Two backup registers are used to store the Cortex-M4 state and the resource
table address.
Declare the tamp node and add associated properties in m4_rproc node
to allow Linux to attach to a firmware loaded by the first boot stages.
Associated driver implementation is available in commit
9276536f455b3
("remoteproc: stm32: Parse syscon that will manage M4 synchronisation").
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Amelie Delaunay [Tue, 10 Nov 2020 13:10:59 +0000 (14:10 +0100)]
ARM: dts: stm32: adjust USB OTG gadget fifo sizes in stm32mp151
Defaut use case on stm32mp151 USB OTG is ethernet gadget, using EP1 bulk
endpoint (MPS=512 bytes) and EP2 interrupt endpoint (MPS=16 bytes).
This patch optimizes USB OTG FIFO sizes accordingly.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Amelie Delaunay [Tue, 10 Nov 2020 14:27:37 +0000 (15:27 +0100)]
ARM: dts: stm32: fix dmamux reg property on stm32h743
Reg property length should cover all DMAMUX_CxCR registers.
DMAMUX_CxCR Address offset: 0x000 + 0x04 * x (x = 0 to 15), so latest
offset is at 0x3c, so length should be 0x40.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Amelie Delaunay [Tue, 10 Nov 2020 14:27:36 +0000 (15:27 +0100)]
ARM: dts: stm32: fix dmamux reg property on stm32mp151
Reg property length should cover all DMAMUX_CxCR registers.
DMAMUX_CxCR Address offset: 0x000 + 0x04 * x (x = 0 to 15), so latest
offset is at 0x3c, so length should be 0x40.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Amelie Delaunay [Tue, 10 Nov 2020 14:36:41 +0000 (15:36 +0100)]
ARM: dts: stm32: fix mdma1 clients channel priority level on stm32mp151
Update mdma1 clients channel priority level following stm32-mdma bindings.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Amelie Delaunay [Fri, 6 Nov 2020 16:58:04 +0000 (17:58 +0100)]
ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx
This patch adds support for STUSB1600 USB Type-C port controller, used on
I2C4 on stm32mp15xx-dkx.
The default configuration on this board, on Type-C connector, is:
- Dual Power Role (DRP), so set power-role to "dual";
- Vbus limited to 500mA, so set typec-power-opmode to "default" (it means
500mA in USB 2.0).
typec-power-opmode is used to reconfigure the STUSB1600 advertising of
current capability when its NVM is not in line with the board layout.
On stm32mp15xx-dkx, Vbus power source of STUSB1600 is 5V_VIN. So power
operation mode depends on the power supply used. To avoid any power
issues, it is better to limit Vbus to 500mA on this board.
ALERT# is the interrupt pin of STUSB1600. It needs an external pull-up, and
signal is active low.
USB OTG controller ID and Vbus signals are not connected on stm32mp15xx-dkx
boards, so disconnection are not detected.
Without DWC2 usb-role-switch:
- if you unplug the USB cable from the Type-C port, you have to manually
disconnect the USB gadget:
echo disconnect > /sys/devices/platform/soc/
49000000.usb-otg/udc/
49000000.usb-otg/soft_connect
- Then you can plug the USB cable again in the Type-C port, and manually
reconnect the USB gadget:
echo connect > /sys/devices/platform/soc/
49000000.usb-otg/udc/
49000000.usb-otg/soft_connect
With DWC2 usb-role-switch, USB gadget is dynamically disconnected or connected.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Amelie Delaunay [Fri, 6 Nov 2020 16:58:02 +0000 (17:58 +0100)]
dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller
Add binding documentation for the STMicroelectronics STUSB160x Type-C port
controller.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Amelie Delaunay [Fri, 6 Nov 2020 16:58:01 +0000 (17:58 +0100)]
dt-bindings: connector: add typec-power-opmode property to usb-connector
Power operation mode may depends on hardware design, so, add the optional
property typec-power-opmode for usb-c connector to select the power
operation mode capability.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Patrick Delaunay [Thu, 22 Oct 2020 17:38:51 +0000 (19:38 +0200)]
ARM: dts: stm32: reorder spi4 within stm32mp15-pinctrl
Move spi4 at the right alphabetical place within stm32mp15-pinctrl
Fixes:
4fe663890ac5 ("ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrl")
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Hugues Fruchet [Wed, 4 Nov 2020 17:32:12 +0000 (18:32 +0100)]
ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval board
Explicitly set bus-type to parallel mode in DCMI endpoint (bus-type=5).
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Hugues Fruchet [Wed, 4 Nov 2020 17:32:11 +0000 (18:32 +0100)]
ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 board
Explicitly set bus-type to parallel mode in DCMI endpoint (bus-type=5).
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Lionel Debieve [Thu, 5 Nov 2020 10:23:31 +0000 (11:23 +0100)]
ARM: dts: stm32: enable CRYP by default on stm32mp15
Enable CRYP1 device for cryp accelerated support on
stm32mp157C-EV1/DK2 STMicroelectronics platforms.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Nicolas Toromanoff [Thu, 5 Nov 2020 10:23:30 +0000 (11:23 +0100)]
ARM: dts: stm32: enable CRC1 by default on stm32mp15
Enable CRC1 device for CRC-32 accelerated support on
stm32mp15 STMicroelectronics platforms.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Lionel Debieve [Thu, 5 Nov 2020 10:23:29 +0000 (11:23 +0100)]
ARM: dts: stm32: enable HASH by default on stm32mp15
Enable HASH1 device for HASH accelerated support on
stm32mp15 STMicroelectronics platforms.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Fabrice Gasnier [Fri, 16 Oct 2020 14:40:19 +0000 (16:40 +0200)]
ARM: dts: stm32: Add LP timer wakeup-source on stm32mp151
LP timer can be used to wakeup from stop mode on stm32mp151.
Add wakeup-source properties to all LP timer instances.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Fabrice Gasnier [Fri, 16 Oct 2020 14:40:18 +0000 (16:40 +0200)]
ARM: dts: stm32: Add LP timer irqs on stm32mp151
Add all LP timer irqs on stm32mp151.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Yann Gautier [Tue, 20 Oct 2020 14:04:51 +0000 (16:04 +0200)]
ARM: dts: stm32: update sdmmc IP version for STM32MP15
Update the IP version to v2.0, which supports linked lists in internal DMA,
and is present in STM32MP1 SoCs.
The mmci driver supports the v2.0 periph id since
7a2a98be672b ("mmc: mmci:
Add support for sdmmc variant revision 2.0"), so it's now Ok to add it into
the SoC device tree to benefit from the improved DMA support.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Serge Semin [Tue, 20 Oct 2020 11:59:38 +0000 (14:59 +0300)]
ARM: dts: stm32: Harmonize EHCI/OHCI DT nodes name on stm32mp15
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Amelie Delaunay <amelie.delaunay@st.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Jisheng Zhang [Mon, 9 Nov 2020 09:05:29 +0000 (17:05 +0800)]
arm64: dts: hisilicon: Use generic "ngpios" rather than "snps,nr-gpios"
This is to remove similar errors as below:
OF: /.../gpio-port@0: could not find phandle
Commit
7569486d79ae ("gpio: dwapb: Add ngpios DT-property support")
explained the reason of above errors well and added the generic
"ngpios" property, let's use it.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Serge Semin [Wed, 11 Nov 2020 09:15:50 +0000 (12:15 +0300)]
arm64: dts: hi3660: Harmonize DWC USB3 DT nodes name
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 13:17:39 +0000 (21:17 +0800)]
arm64: dts: hisilicon: list all clocks required by snps-dw-apb-uart.yaml
The snps,dw-apb-uart binding need to specify two clocks: "baudclk",
"apb_pclk". But only "apb_pclk" is specified now. Because the driver
preferentially matches the first clock. Otherwise, it matches the second
clock instead of both clocks. So both of them use the same clock don't
change the function.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 13:17:38 +0000 (21:17 +0800)]
arm64: dts: hisilicon: list all clocks required by pl011.yaml
The arm,pl011 binding need to specify two clocks: "uartclk", "apb_pclk".
But only "apb_pclk" is specified now. Because the driver preferentially
matches the first clock. Otherwise, it matches the second clock instead
of both clocks. So both of them use the same clock don't change the
function.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 13:17:37 +0000 (21:17 +0800)]
arm64: dts: hisilicon: list all clocks required by spi-pl022.yaml
The arm,pl022 binding need to specify two clocks: "sspclk", "apb_pclk".
But only "apb_pclk" is specified now. Because the driver preferentially
matches the first clock. Otherwise, it matches the second clock instead
of both clocks. So both of them use the same clock don't change the
function.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 13:17:36 +0000 (21:17 +0800)]
arm64: dts: hisilicon: normalize the node name of the UART devices
Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 13:17:35 +0000 (21:17 +0800)]
arm64: dts: hisilicon: normalize the node name of the usb devices
Change the node name of the usb devices to match "^usb(@.*)?". These errors
are detected by generic-ehci.yaml and generic-ohci.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 13:17:34 +0000 (21:17 +0800)]
arm64: dts: hisilicon: normalize the node name of the SMMU devices
Change the node name of the SMMU devices to match "^iommu@[0-9a-f]*".
Otherwise, the errors similar to the following will be reported by
arm,smmu-v3.yaml.
smmu_pcie: $nodename:0: 'smmu_pcie' does not match '^iommu@[0-9a-f]*'
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 13:17:33 +0000 (21:17 +0800)]
arm64: dts: hisilicon: place clock-names "biu" before "ciu"
Look at the clock-names schema defined in synopsys-dw-mshc.yaml:
clock-names:
items:
- const: biu
- const: ciu
The "biu" needs to be placed before the "ciu".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 13:17:32 +0000 (21:17 +0800)]
arm64: dts: hisilicon: remove unused property pinctrl-names
uart1 and uart5 are not used as pinctrl, so the property "pinctrl-names"
can be deleted. In fact, the property "pinctrl-names" depends on the
property "pinctrl-0". So the errors similar to the following will be
reported by pinctrl-consumer.yaml.
serial@
fdf00000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 13:17:31 +0000 (21:17 +0800)]
arm64: dts: hisilicon: write the values of property-units into a uint32 array
Use <> to separate the values of property-units will be treated as
multiple arrays. The errors similar to the following will be reported by
property-units.yaml.
ufs@
ff3c0000: freq-table-hz: [[0, 0], [0, 0]] is too long
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 13:17:30 +0000 (21:17 +0800)]
arm64: dts: hisilicon: separate each group of data in the property "reg"
Do not write the "reg" of multiple groups of data into a uint32 array,
use <> to separate them. Otherwise, the errors similar to the following
will be reported by reg.yaml.
soc: dsa@
c7000000:reg:0: [0,
3305111552, 0,
8978432, 0,
3338665984, 0, \
6291456] is too long
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 13:17:29 +0000 (21:17 +0800)]
arm64: dts: hisilicon: normalize the node name of the ITS devices
Change the node name of the ITS devices to match
"^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$". Although
"interrupt-controller" is allowed, but "msi-controller" is preferred.
Otherwise, "interrupt-controller@
b7000000: False schema does not allow"
will be reported by arm,gic-v3.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 06:12:23 +0000 (14:12 +0800)]
ARM: dts: hisilicon: fix errors detected by syscon.yaml
The DT binding for system controller is not allowed to contain only the
compatible string "syscon", the Hisilicon peripheral subsystem controller
should add compatible string "hisilicon,peri-subctrl". Otherwise, the
error "compatible: ['syscon'] is too short" will be reported.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 06:12:22 +0000 (14:12 +0800)]
ARM: dts: hisilicon: fix errors detected by spi-pl022.yaml
1. Change clock-names to "sspclk", "apb_pclk". Both of them use the same
clock.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 06:12:21 +0000 (14:12 +0800)]
ARM: dts: hisilicon: fix errors detected by synopsys-dw-mshc.yaml
Look at the clock-names schema defined in synopsys-dw-mshc.yaml:
clock-names:
items:
- const: biu
- const: ciu
The "biu" needs to be placed before the "ciu".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 06:12:20 +0000 (14:12 +0800)]
ARM: dts: hisilicon: fix errors detected by root-node.yaml
Make the memory node name match the regex "^memory(@[0-9a-f]+)?$" which
is described in memory.yaml. Otherwise, it will be treated as root node,
and misreported by root-node.yaml.
Errors misreported by root-node.yaml:
/: memory: False schema does not allow {'device_type': ['memory'], 'reg':
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 06:12:19 +0000 (14:12 +0800)]
ARM: dts: hisilicon: fix errors detected by simple-bus.yaml
Change bus node name from "amba" to "amba-bus" to match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 06:12:18 +0000 (14:12 +0800)]
ARM: dts: hisilicon: fix errors detected by usb yaml
1. Change node name to match '^usb(@.*)?'
These errors are detected by generic-ehci.yaml and generic-ohci.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 06:12:17 +0000 (14:12 +0800)]
ARM: dts: hisilicon: fix errors detected by pl011.yaml
1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "uartclk", "apb_pclk". Both of them use the same
clock.
3. Change pinctrl-names to "default", "sleep".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhen Lei [Mon, 12 Oct 2020 06:12:16 +0000 (14:12 +0800)]
ARM: dts: hisilicon: fix errors detected by snps-dw-apb-uart.yaml
1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "baudclk", "apb_pclk". Both of them use the same
clock.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Arnd Bergmann [Mon, 23 Nov 2020 16:15:25 +0000 (17:15 +0100)]
Merge tag 'ux500-dts-for-v5.11-1' of git://git./linux/kernel/git/linusw/linux-stericsson into arm/dt
Ux500 DTS updates for the v5.11 kernels:
- Rename the DSI controllers to match the preferred
schema.
- Pull down the SDI2 feedback clock on the Skomer.
- Add proper supplies to the MaxToch touchscreen on
the Golden.
* tag 'ux500-dts-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ux500-golden: Add proper supplies to touchscreen
ARM: dts: ux500: skomer: Pull down SDI2 FBCLK
ARM: dts: ux500: Rename DSI controller nodes
Link: https://lore.kernel.org/r/CACRpkdY_M4xj++QhRPqX6N3x9YmFNJkz70DnvBj7Ai-dOtCJSQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tomer Maimon [Thu, 19 Nov 2020 08:00:02 +0000 (10:00 +0200)]
ARM: dts: add Nuvoton NPCM730 device tree
Add Nuvoton NPCM730 SoC device tree.
The Nuvoton NPCN730 SoC is a part of the
Nuvoton NPCM7xx SoCs family.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Link: https://lore.kernel.org/r/20201119080002.100342-1-tmaimon77@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 23 Nov 2020 15:52:04 +0000 (16:52 +0100)]
Merge tag 'samsung-dt-5.11' of git://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.11
1. Many cleanups of DTS and alignments to dtschema. Most of them do not
have any functional effect except passing dtschema checks or dtc W=2
builds.
2. Fix USB 3.0 ports on Odroid XU board: wrong roles assigned to two
ports, missing supply to the USB over-current and VBUS control pins
and finally missing pin configuration for these pins.
3. Switch Exynos5422 DMC driver to monitoring/polling mode, instead of
using interrupts.
4. Correct the usage of "opp-shared" properties which lead to disabling
the bus frequency and voltage scaling.
5. Enable Bluetooth on few Exynos4210 and Exynos4412 boards.
6. Enable dual-role USB on Odroid U3+ board.
7. Add Ethernet description in multiple Odroid DTS allowing also easy
MAC address filling by bootloader.
8. Add Ethernet to Artik 5 (Exynos3250) board.
9. Add interconnect properties to Exynos4412 to fix old Mixer issues.
* tag 'samsung-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits)
ARM: dts: exynos: use hyphens in MFC reserved memory node names
ARM: dts: exynos: use hyphens in Exynos5 node names
ARM: dts: exynos: use generic name for max77693 motor in Midas
ARM: dts: exynos: use hyphens in Exynos4 node names
ARM: dts: exynos: use hyphens in Exynos3250 node names
ARM: dts: exynos: Add interconnects to Exynos4412 mixer
ARM: dts: exynos: Add interconnect properties to Exynos4412 bus nodes
ARM: dts: exynos: Add Ethernet to Artik 5 board
ARM: dts: exynos: Add a placeholder for a MAC address
ARM: dts: exynos: Add Ethernet interface description for Odroid X/X2
ARM: dts: exynos: Add Ethernet interface description for Odroid U3
ARM: dts: exynos: Add Ethernet interface description for Odroid XU
ARM: dts: exynos: Add Ethernet interface description for Odroid XU3 Lite
ARM: dts: exynos: Enable DWC2 dual-role support on OdroidU3+ boards
ARM: dts: s5pv210: adjust node names to DT spec
ARM: dts: exynos: adjust node names to DT spec in Exynos542x boards
ARM: dts: exynos: adjust node names to DT spec in Odroid XU
ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boards
ARM: dts: exynos: remove redundant status=okay in Exynos4412 boards
ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards
...
Link: https://lore.kernel.org/r/20201113162211.10020-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 23 Nov 2020 15:50:35 +0000 (16:50 +0100)]
Merge tag 'renesas-dt-bindings-for-v5.11-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.11
- Document suport for the R-Car M3-W+ ULCB/Kingfisher board combo.
* tag 'renesas-dt-bindings-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Add R-Car M3-W+ ULCB with Kingfisher
Link: https://lore.kernel.org/r/20201113150854.3923885-5-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 23 Nov 2020 15:48:48 +0000 (16:48 +0100)]
Merge tag 'renesas-arm-dt-for-v5.11-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.11
- Touch screen and OV5640 camera support for the iWave RainboW Qseven
board (G21D), and its camera expansion board,
- Support for the AISTARVISION MIPI Adapter V2.1 board connected to
HiHope RZ/G2 boards,
- SPI (MSIOF) support for the R-Car M3-W+ SoC,
- Digital Radio Interface (DRIF) support for the R-Car M3-N SoC,
- Initial support for the R-Car M3-W+ ULCB/Kingfisher board combo,
- Minor fixes and improvements.
* tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: hihope-rev4: Add a comment explaining switch SW2404
arm64: dts: renesas: r8a77961: ulcb-kf: Initial device tree
arm64: dts: renesas: r8a77961: Add CAN{0,1} placeholder nodes
arm64: dts: renesas: beacon-renesom-baseboard: Move connector node out of hd3ss3220 device
arm64: dts: renesas: cat874: Move connector node out of hd3ss3220 device
arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling
arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling
arm64: dts: renesas: r8a77965: Add DRIF support
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor
arm64: dts: renesas: cat875: Remove rxc-skew-ps from ethernet-phy node
arm64: dts: renesas: hihope-rzg2-ex: Drop rxc-skew-ps from ethernet-phy node
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Enable VIN instances
arm64: dts: renesas: r8a77961: Add MSIOF nodes
arm64: dts: renesas: Align GPIO hog names with dtschema
ARM: dts: r8a7742-iwg21d-q7: Add LCD support
Link: https://lore.kernel.org/r/20201113150854.3923885-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Walleij [Fri, 20 Nov 2020 12:42:12 +0000 (13:42 +0100)]
ARM: dts: ux500-golden: Add proper supplies to touchscreen
This sets up the Atmel maXTouch touchscreen to use proper
VDDA and VDD supplies as now supported by bindings and
driver.
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Nick Reitemeyer <nick.reitemeyer@web.de>
Cc: Nick Dyer <nick@shmanahar.org>
Link: https://lore.kernel.org/r/20201120124212.1086063-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Marek Vasut [Thu, 8 Oct 2020 19:38:00 +0000 (21:38 +0200)]
ARM: dts: stm32: Add KS8851 on FMC2 to STM32MP1 DHCOM
Add bindings for the KS8851 ethernet present on the STM32MP1 DHCOM SoM.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Marek Vasut [Thu, 8 Oct 2020 19:37:59 +0000 (21:37 +0200)]
ARM: dts: stm32: Add alternate pinmux for FMC EBI bus
Add another mux option for FMC EBI bus, this is used on DHCOM SoM
for the second ethernet and on the PDK2 devkit for SRAM.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Marek Vasut [Thu, 8 Oct 2020 19:36:18 +0000 (21:36 +0200)]
ARM: dts: stm32: Connect PHY IRQ line on DH STM32MP1 SoM
On the production DHCOM STM32MP15xx SoM, the PHY IRQ line is connected
to the PI11 pin. Describe it in the DT as well, so the PHY IRQ can be
used e.g. to detect cable insertion and removal.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Hugues Fruchet [Thu, 8 Oct 2020 09:09:42 +0000 (11:09 +0200)]
ARM: dts: stm32: fix DCMI DMA features on stm32mp15 family
Enable FIFO mode with half-full threshold.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Alexander Shiyan [Wed, 11 Nov 2020 15:59:10 +0000 (18:59 +0300)]
ARM: dts: am335x: Fix comments for AM335X_PIN_GPMC_WPN pin in GPIO mode
According to AM335x datasheet pin AM335X_PIN_GPMC_WPN in MODE7 works as
GPIO0[31].
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Tony Lindgren <tony@atomide.com>
David Lechner [Mon, 12 Oct 2020 21:12:28 +0000 (16:12 -0500)]
ARM: dts: am335x-boneblue: Enable eQEP
This enables the Enhanced Quadrature Encoder Pulse (eQEP) module for
connectors E1, E2 and E3 on BeagleBone Blue.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
David Lechner [Mon, 12 Oct 2020 21:12:27 +0000 (16:12 -0500)]
ARM: dts: am33xx: Add nodes for eQEP
This adds new nodes for the Texas Instruments Enhanced Quadrature
Encoder Pulse (eQEP) module in the PWM subsystem on AM33XX.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Mon, 7 Sep 2020 09:52:46 +0000 (12:52 +0300)]
ARM: dts: dra7: add second SHA instance
DRA7 SoC has two SHA instances, add the missing second one under the
main dts file.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Linus Walleij [Wed, 11 Nov 2020 00:25:13 +0000 (01:25 +0100)]
ARM: dts: ux500: skomer: Pull down SDI2 FBCLK
The feedback clock on SDI2 needs to be pulled down on
this machine.
Link: https://lore.kernel.org/r/20201111002513.2271351-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Krzysztof Kozlowski [Thu, 5 Nov 2020 18:45:05 +0000 (19:45 +0100)]
ARM: dts: exynos: use hyphens in MFC reserved memory node names
Use hyphens instead of underscores in the MFC reserved memory node names
which is expected by naming convention, multiple dtschema files and
pointed out by dtc W=2 builds.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-5-krzk@kernel.org
Krzysztof Kozlowski [Thu, 5 Nov 2020 18:45:04 +0000 (19:45 +0100)]
ARM: dts: exynos: use hyphens in Exynos5 node names
Use hyphens instead of underscores in the Exynos5250 and Exynos542x node
names which is expected by naming convention, multiple dtschema files
and pointed out by dtc W=2 builds.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-4-krzk@kernel.org
Krzysztof Kozlowski [Thu, 5 Nov 2020 18:45:03 +0000 (19:45 +0100)]
ARM: dts: exynos: use generic name for max77693 motor in Midas
Use a generic name for the max77693 motor driver in Exynos4412 Midas
boards to align with Devicetree specification naming convention.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-3-krzk@kernel.org
Krzysztof Kozlowski [Thu, 5 Nov 2020 18:45:02 +0000 (19:45 +0100)]
ARM: dts: exynos: use hyphens in Exynos4 node names
Use hyphens instead of underscores in the Exynos4210 and Exynos4412 node
names which is expected by naming convention, multiple dtschema files
and pointed out by dtc W=2 builds. Use also generic "ppmu" node name
for PPMU nodes to match Devicetree specification.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-2-krzk@kernel.org
Krzysztof Kozlowski [Thu, 5 Nov 2020 18:41:08 +0000 (19:41 +0100)]
ARM: dts: exynos: use hyphens in Exynos3250 node names
Use hyphens instead of underscores in the Exynos3250 node names which is
expected by naming convention, multiple dtschema files and pointed out
by dtc W=2 builds. Use also generic "ppmu" node name for PPMU nodes to
match Devicetree specification.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201105184506.215648-1-krzk@kernel.org
Artur Świgoń [Wed, 4 Nov 2020 10:36:56 +0000 (11:36 +0100)]
ARM: dts: exynos: Add interconnects to Exynos4412 mixer
This patch adds an 'interconnects' property to Exynos4412 DTS in order to
declare the interconnect path used by the mixer. Please note that the
'interconnect-names' property is not needed when there is only one path in
'interconnects', in which case calling of_icc_get() with a NULL name simply
returns the right path.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20201104103657.18007-7-s.nawrocki@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Sylwester Nawrocki [Wed, 4 Nov 2020 10:36:55 +0000 (11:36 +0100)]
ARM: dts: exynos: Add interconnect properties to Exynos4412 bus nodes
This patch adds the following properties for Exynos4412 interconnect
bus nodes:
- interconnects: to declare connections between nodes in order to
guarantee PM QoS requirements between nodes,
- #interconnect-cells: required by the interconnect framework,
- samsung,data-clk-ratio: which allows to specify minimum data clock
frequency corresponding to requested bandwidth for each bus.
Note that #interconnect-cells is always zero and node IDs are not
hardcoded anywhere.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20201104103657.18007-6-s.nawrocki@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tony Lindgren [Tue, 10 Nov 2020 13:42:31 +0000 (15:42 +0200)]
Merge branch 'omap-for-v5.11/dt-mot-take2' into omap-for-v5.11/dt
Carl Philipp Klemm [Sun, 8 Nov 2020 18:43:39 +0000 (19:43 +0100)]
ARM: dts: xt875: add section for kionix kxtf9
Add section for kionix kxtf9.
Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
[tony@atomide.com: removed extra header from description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Carl Philipp Klemm [Sun, 8 Nov 2020 18:49:56 +0000 (19:49 +0100)]
ARM: dts: mapphone: separate out xt894 specific things
Remove xt894 specific things from motorola-mapphone-common.dtsi and add
them to omap4-droid4-xt894.dts and omap4-droid-bionic-xt875.dts as
applicable.
Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
[tony@atomide.com: shortened subject, wrapped description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Alexander Dahl [Mon, 5 Oct 2020 20:34:48 +0000 (22:34 +0200)]
ARM: dts: omap: Fix schema warnings for pwm-leds
The node names for devices using the pwm-leds driver follow a certain
naming scheme (now). Parent node name is not enforced, but recommended
by DT project.
DTC arch/arm/boot/dts/omap3-beagle-xm.dt.yaml
CHECK arch/arm/boot/dts/omap3-beagle-xm.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-beagle-xm.dt.yaml: pwmleds: 'pmu_stat' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml
CHECK arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml: pwmleds: 'pmu_stat' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-alto35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-alto35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-alto35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-palo35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-palo35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-palo35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-palo43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-palo43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-palo43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-summit.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-summit.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-summit.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-tobi.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-tobi.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-tobi.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml
CHECK arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap4-kc1.dt.yaml
CHECK arch/arm/boot/dts/omap4-kc1.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap4-kc1.dt.yaml: pwmleds: 'green', 'orange' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap4-sdp.dt.yaml
CHECK arch/arm/boot/dts/omap4-sdp.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap4-sdp.dt.yaml: pwmleds: 'charging', 'kpad' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml
CHECK arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml
/home/alex/build/linux/arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml: pwmleds: 'charging', 'kpad' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Serge Semin [Tue, 20 Oct 2020 11:59:52 +0000 (14:59 +0300)]
ARM: dts: omap5: Harmonize DWC USB3 DT nodes name
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Serge Semin [Tue, 20 Oct 2020 11:59:33 +0000 (14:59 +0300)]
ARM: dts: am437x: Correct DWC USB3 compatible string
Syonpsys IP cores are supposed to be defined with "snps" vendor-prefix.
Use it instead of the deprecated "synopsys" one.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
H. Nikolaus Schaller [Sat, 3 Oct 2020 14:10:01 +0000 (16:10 +0200)]
ARM: dts: pandaboard es: add bluetooth uart for HCI
The wl271 bluetooth uart is connected to uart2.
Setup a serdev uart child and separate bluetooth and uart2 pinmux
from wl12xx pinmux to better group the pins and muxes.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
H. Nikolaus Schaller [Sat, 3 Oct 2020 14:10:00 +0000 (16:10 +0200)]
ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ES
The pinmux control register offset passed to OMAP4_IOPAD is odd.
Fixes:
ab9a13665e7c ("ARM: dts: pandaboard: add gpio user button")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lad Prabhakar [Thu, 5 Nov 2020 12:11:27 +0000 (12:11 +0000)]
arm64: dts: renesas: hihope-rev4: Add a comment explaining switch SW2404
Switch SW2404 should be at position 1 so that the clock output from
CS2000 is connected to AUDIO_CLKB_A.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Link: https://lore.kernel.org/r/20201105121127.11830-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Eugeniu Rosca [Thu, 29 Oct 2020 13:37:41 +0000 (14:37 +0100)]
arm64: dts: renesas: r8a77961: ulcb-kf: Initial device tree
Create a dedicated DTB for M3-ES3.0 + ULCB + Kingfisher combo.
Inspire from the pre-existing ULCB-KF device trees:
$ ls -1 arch/arm64/boot/dts/renesas/*ulcb-kf.dts
arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts
arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts
arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts
arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20201029133741.25721-2-erosca@de.adit-jv.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Eugeniu Rosca [Thu, 29 Oct 2020 13:37:40 +0000 (14:37 +0100)]
arm64: dts: renesas: r8a77961: Add CAN{0,1} placeholder nodes
With the same background and purpose as described in v4.20-rc1
commit
92bc66bfce99cd ("arm64: dts: renesas: r8a77965: Add CAN{0,1}
placeholder nodes"), add can0 and can1 placeholder nodes.
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20201029133741.25721-1-erosca@de.adit-jv.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Biju Das [Sun, 20 Sep 2020 13:49:05 +0000 (14:49 +0100)]
arm64: dts: renesas: beacon-renesom-baseboard: Move connector node out of hd3ss3220 device
Move connector node out of hd3ss3220 device in order to comply with usb
connector bindings.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20200920134905.4370-7-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Biju Das [Sun, 20 Sep 2020 13:49:04 +0000 (14:49 +0100)]
arm64: dts: renesas: cat874: Move connector node out of hd3ss3220 device
Move connector node out of hd3ss3220 device in order to comply with usb
connector bindings.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20200920134905.4370-6-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Geert Uytterhoeven [Wed, 19 Aug 2020 13:43:44 +0000 (15:43 +0200)]
arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling
Some EtherAVB variants support internal clock delay configuration, which
can add larger delays than the delays that are typically supported by
the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
properties).
Historically, the EtherAVB driver configured these delays based on the
"rgmii-*id" PHY mode. This was wrong, as these are meant solely for the
PHY, not for the MAC. Hence properties were introduced for explicit
configuration of these delays.
Convert the RZ/G2 DTS files from the old to the new scheme:
- Add default "rx-internal-delay-ps" and "tx-internal-delay-ps"
properties to the SoC .dtsi files, to be overridden by board files
where needed,
- Convert board files from "rgmii-*id" PHY modes to "rgmii", adding
the appropriate "rx-internal-delay-ps" and/or "tx-internal-delay-ps"
overrides.
Notes:
- RZ/G2E does not support TX internal delay handling.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819134344.27813-8-geert+renesas@glider.be
Geert Uytterhoeven [Wed, 19 Aug 2020 13:43:43 +0000 (15:43 +0200)]
arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling
Some EtherAVB variants support internal clock delay configuration, which
can add larger delays than the delays that are typically supported by
the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
properties).
Historically, the EtherAVB driver configured these delays based on the
"rgmii-*id" PHY mode. This was wrong, as these are meant solely for the
PHY, not for the MAC. Hence properties were introduced for explicit
configuration of these delays.
Convert the R-Car Gen3 DTS files from the old to the new scheme:
- Add default "rx-internal-delay-ps" and "tx-internal-delay-ps"
properties to the SoC .dtsi files, to be overridden by board files
where needed,
- Convert board files from "rgmii-*id" PHY modes to "rgmii", adding
the appropriate "rx-internal-delay-ps" and/or "tx-internal-delay-ps"
overrides.
Notes:
- R-Car E3 and D3 do not support TX internal delay handling,
- On R-Car D3, TX internal delay handling must always be enabled,
hence this fixes a bug on Draak,
- On R-Car V3H, RX internal delay handling must always be enabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819134344.27813-7-geert+renesas@glider.be
Fabrizio Castro [Wed, 21 Oct 2020 13:53:32 +0000 (14:53 +0100)]
arm64: dts: renesas: r8a77965: Add DRIF support
Add the DRIF controller nodes for r8a77965 (a.k.a. R-Car M3-N).
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20201021135332.4928-6-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>