git.monstr.eu Git - linux-2.6-microblaze.git/log

mmc: block: Support alternative_gpt_sector() operation

Support generic alternative_gpt_sector() block device operation.
It calculates location of GPT entry for eMMC of NVIDIA Tegra Android
devices. Add new MMC_CAP2_ALT_GPT_TEGRA flag that enables scanning of
alternative GPT sector and add raw_boot_mult field to mmc_ext_csd
which allows to get size of the boot partitions that is needed for
the calculation.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210820004536.15791-4-digetx@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

partitions/efi: Support non-standard GPT location

Support looking up GPT at a non-standard location specified by a block
device driver.

Acked-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210820004536.15791-3-digetx@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: Add alternative_gpt_sector() operation

Add alternative_gpt_sector() block device operation which specifies
alternative location of a GPT entry. This allows us to support Android
devices that have GPT entry at a non-standard location and can't be
repartitioned easily.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210820004536.15791-2-digetx@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bio: fix page leak bio_add_hw_page failure

__bio_iov_append_get_pages() doesn't put not appended pages on
bio_add_hw_page() failure, so potentially leaking them, fix it. Also, do
the same for __bio_iov_iter_get_pages(), even though it looks like it
can't be triggered by userspace in this case.

Fixes: 0512a75b98f8 ("block: Introduce REQ_OP_ZONE_APPEND")
Cc: stable@vger.kernel.org # 5.8+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1edfa6a2ffd66d55e6345a477df5387d2c1415d0.1626653825.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT

This might have been a neat debug aid when the extended dev_t was
added, but that time is long gone.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210824075216.1179406-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove a pointless call to MINOR() in device_add_disk

blk_alloc_ext_minor already returns just a minor number, so no need to
mask the high bits.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210824075216.1179406-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

null_blk: add error handling support for add_disk()

We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling. The actual cleanup in case of error is
already handled by the caller of null_gendisk_register().

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

virtio_blk: add error handling support for add_disk()

We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: add error handling for device_add_disk / add_disk

Properly unwind on errors in device_add_disk. This is the initial work
as drivers are not converted yet, which will follow in separate patches.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: major rebase. All bugs are probably mine]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: return errors from disk_alloc_events

Prepare for proper error handling in add_disk.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: return errors from blk_integrity_add

Prepare for proper error handling in add_disk.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: call blk_register_queue earlier in device_add_disk

Ensure that all the sysfs bits are set up before bdev_add is called,
as that will make the upcomding error handling much easier. However
this means the call to disk_update_readahead has to be split as that
requires a bdi. Also remove various sanity checks that don't make
sense now that blk_register_queue only has a single caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210818144542.19305-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: call blk_integrity_add earlier in device_add_disk

Doing all the sysfs file creation before adding the bdev and thus
allowing it to be opened will simplify the about to be added error
handling.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: create the bdi link earlier in device_add_disk

This will simplify error handling going forward.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: call bdev_add later in device_add_disk

Once bdev_add is called userspace can open the block device. Ensure
that the struct device, which is used for refcounting of the disk
besides various other things, is fully setup at that point.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: fold register_disk into device_add_disk

There is no real reason these should be separate. Also simplify the
groups assignment a bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210818144542.19305-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: add a sanity check for a live disk in del_gendisk

Add a sanity check to del_gendisk to do nothing when the disk wasn't
successfully added. This papers over the complete lack of add_disk
error handling, which is about to get fixed gradually.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: add an explicit ->disk backpointer to the request_queue

Replace the magic lookup through the kobject tree with an explicit
backpointer, given that the device model links are set up and torn
down at times when I/O is still possible, leading to potential
NULL or invalid pointer dereferences.

Fixes: edb0872f44ec ("block: move the bdi from the request_queue to the gendisk")
Reported-by: syzbot <syzbot+aa0801b6b32dca9dda82@syzkaller.appspotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/20210816134624.GA24234@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: hold a request_queue reference for the lifetime of struct gendisk

Acquire the queue ref dropped in disk_release in __blk_alloc_disk so any
allocate gendisk always has a queue reference.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816131910.615153-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: pass a request_queue to __blk_alloc_disk

Pass in a request_queue and assign disk->queue in __blk_alloc_disk to
ensure struct gendisk always has a valid ->queue pointer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816131910.615153-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove the minors argument to __alloc_disk_node

This was a leftover from the legacy alloc_disk interface. Switch
the scsi ULPs and dasd to set ->minors directly like all other
drivers and remove the argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com> [dasd]
Link: https://lore.kernel.org/r/20210816131910.615153-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove alloc_disk and alloc_disk_node

Most drivers should use and have been converted to use blk_alloc_disk
and blk_mq_alloc_disk. Only the scsi ULPs and dasd still allocate
a disk separately from the request_queue, so don't bother with
convenience macros for something that should not see significant
new users and remove these wrappers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816131910.615153-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: cleanup the lockdep handling in *alloc_disk

Pass the lockdep name to the low-level __blk_alloc_disk helper and
hardcode the name for it given that the number of minors or node_id
are not very useful information. While this passes a pointless
argument for non-lockdep builds that is not really an issue as
disk allocation is a probe time only slow path.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816131910.615153-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sg: do not allocate a gendisk

sg is a character driver and thus does not need to allocate a gendisk,
which is only used for file system-like block layer I/O on block
devices.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210816131910.615153-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

st: do not allocate a gendisk

st is a character driver and thus does not need to allocate a gendisk,
which is only used for file system-like block layer I/O on block
devices.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816131910.615153-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvme: use blk_mq_alloc_disk

Switch to use the blk_mq_alloc_disk helper for allocating the
request_queue and gendisk.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210816131910.615153-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: add back the bd_holder_dir reference in bd_link_disk_holder

This essentially reverts "block: remove the extra kobject reference in
bd_link_disk_holder". That commit dropped the extra reference because
the condition in the comment can't be true. But it turns out that
comment did not actually describe the problematic situation, so add
back the extra reference and document it properly.

Fixes: fbd9a39542ec ("block: remove the extra kobject reference in bd_link_disk_holder")
Reported-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: fix default IO priority handling

The default IO priority is the best effort (BE) class with the
normal priority level IOPRIO_NORM (4). However, get_task_ioprio()
returns IOPRIO_CLASS_NONE/IOPRIO_NORM as the default priority and
get_current_ioprio() returns IOPRIO_CLASS_NONE/0. Let's be consistent
with the defined default and have both of these functions return the
default priority IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, IOPRIO_NORM) when
the user did not define another default IO priority for the task.

In include/uapi/linux/ioprio.h, introduce the IOPRIO_BE_NORM macro as
an alias to IOPRIO_NORM to clarify that this default level applies to
the BE priotity class. In include/linux/ioprio.h, define the macro
IOPRIO_DEFAULT as IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, IOPRIO_BE_NORM)
and use this new macro when setting a priority to the default.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-7-damien.lemoal@wdc.com
[axboe: drop unnecessary lightnvm change]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: Introduce IOPRIO_NR_LEVELS

The BFQ scheduler and ioprio_check_cap() both assume that the RT
priority class (IOPRIO_CLASS_RT) can have up to 8 different priority
levels, similarly to the BE class (IOPRIO_CLASS_iBE). This is
controlled using the IOPRIO_BE_NR macro , which is badly named as the
number of levels also applies to the RT class.

Introduce the class independent IOPRIO_NR_LEVELS macro, defined to 8,
to make things clear. Keep the old IOPRIO_BE_NR macro definition as an
alias for IOPRIO_NR_LEVELS.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-6-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: fix IOPRIO_PRIO_CLASS() and IOPRIO_PRIO_VALUE() macros

The ki_ioprio field of struct kiocb is 16-bits (u16) but often handled
as an int in the block layer. E.g. ioprio_check_cap() takes an int as
argument.

With such implicit int casting function calls, the upper 16-bits of the
int argument may be left uninitialized by the compiler, resulting in
invalid values for the IOPRIO_PRIO_CLASS() macro (garbage upper bits)
and in an error return for functions such as ioprio_check_cap().

Fix this by masking the result of the shift by IOPRIO_CLASS_SHIFT bits
in the IOPRIO_PRIO_CLASS() macro. The new macro IOPRIO_CLASS_MASK
defines the 3-bits mask for the priority class.
Similarly, apply the IOPRIO_PRIO_MASK mask to the data argument of the
IOPRIO_PRIO_VALUE() macro to ignore the upper bits of the data value.
The IOPRIO_CLASS_MASK mask is also applied to the class argument of this
macro before shifting the result by IOPRIO_CLASS_SHIFT bits.

While at it, also change the argument name of the IOPRIO_PRIO_CLASS()
and IOPRIO_PRIO_DATA() macros from "mask" to "ioprio" to reflect the
fact that a priority value should be passed rather than a mask.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-5-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: change ioprio_valid() to an inline function

Change the ioprio_valid() macro in include/usapi/linux/ioprio.h to an
inline function declared on the kernel side in include/linux/ioprio.h.
Also improve checks on the class value by checking the upper bound
value.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-4-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: improve ioprio class description comment

In include/usapi/linux/ioprio.h, change the ioprio class enum comment
to remove the outdated reference to CFQ and mention BFQ and mq-deadline
instead. Also document the high priority NCQ command use for RT class
IOs directed at ATA drives that support NCQ priority.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-3-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: bfq: fix bfq_set_next_ioprio_data()

For a request that has a priority level equal to or larger than
IOPRIO_BE_NR, bfq_set_next_ioprio_data() prints a critical warning but
defaults to setting the request new_ioprio field to IOPRIO_BE_NR. This
is not consistent with the warning and the allowed values for priority
levels. Fix this by setting the request new_ioprio field to
IOPRIO_BE_NR - 1, the lowest priority level allowed.

Cc: <stable@vger.kernel.org>
Fixes: aee69d78dec0 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210811033702.368488-2-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: unexport blk_register_queue

Not actually used in any modular code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816123649.601591-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-cgroup: stop using seq_get_buf

seq_get_buf is a crutch that undoes all the memory safety of the
seq_file interface. Use the normal seq_printf interfaces instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210810152623.1796144-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-cgroup: refactor blkcg_print_stat

Factor out a helper to deal with a single blkcg_gq to make the code a
little bit easier to follow.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210810152623.1796144-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvme: use bvec_virt

Use bvec_virt instead of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20210804095634.460779-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dcssblk: use bvec_virt

Use bvec_virt instead of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210804095634.460779-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dasd: use bvec_virt

Use bvec_virt instead of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20210804095634.460779-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ps3vram: use bvec_virt

Use bvec_virt instead of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210804095634.460779-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ubd: use bvec_virt

Use bvec_virt instead of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20210804095634.460779-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sd: use bvec_virt

Use bvec_virt instead of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210804095634.460779-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bcache: use bvec_virt

Use bvec_virt instead of open coding it. Note that the existing code is
fine despite ignoring bv_offset as the bio is known to contain exactly
one page from the page allocator per bio_vec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210804095634.460779-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

virtio_blk: use bvec_virt

Use bvec_virt instead of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20210804095634.460779-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

rbd: use bvec_virt

Use bvec_virt instead of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20210804095634.460779-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

squashfs: use bvec_virt

Use bvec_virt instead of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210804095634.460779-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm-integrity: use bvec_virt

Use bvec_virt instead of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210804095634.460779-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm-ebs: use bvec_virt

Use bvec_virt instead of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210804095634.460779-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: make EBS depend on !HIGHMEM

__ebs_rw_bvec use page_address on the submitted bios data, and thus
can't deal with highmem. Disable the target on highmem configs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210804095634.460779-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: use bvec_virt in bio_integrity_{process,free}

Use the bvec_virt helper to clean up the bio integrity processing a
little bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@kernel.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210804095634.460779-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bvec: add a bvec_virt helper

Add a helper to get the virtual address for a bvec. This avoids that
all callers need to know about the page + offset representation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210804095634.460779-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: ensure the bdi is freed after inode_detach_wb

inode_detach_wb references the "main" bdi of the inode. With the
recent change to move the bdi from the request_queue to the gendisk
this causes a guaranteed use after free when using certain cgroup
configurations. The big itself is older through as any non-default
inode reference (e.g. an open file descriptor) could have injected
this use after free even before that.

Fixes: 52ebea749aae ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Reported-by: syzbot <syzbot+1fb38bb7d3ce0fa3e1c4@syzkaller.appspotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816122614.601358-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: free the extended dev_t minor later

The dev_t is used as the inode hash, so we should only released it
once then block device inode is gone from the inode cache. Move it
to bdev_free_inode to ensure that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816122614.601358-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-throtl: optimize IOPS throttle for large IO scenarios

After patch 54efd50 (block: make generic_make_request handle
arbitrarily sized bios), the IO through io-throttle may be larger,
and these IOs may be further split into more small IOs. However,
IOPS throttle does not seem to be aware of this change, which
makes the calculation of IOPS of large IOs incomplete, resulting
in disk-side IOPS that does not meet expectations. Maybe we should
fix this problem.

We can reproduce it by set max_sectors_kb of disk to 128, set
blkio.write_iops_throttle to 100, run a dd instance inside blkio
and use iostat to watch IOPS:

dd if=/dev/zero of=/dev/sdb bs=1M count=1000 oflag=direct

As a result, without this change the average IOPS is 1995, with
this change the IOPS is 98.

Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/65869aaad05475797d63b4c3fed4f529febe3c26.1627876014.git.brookxu@tencent.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: pass a gendisk to bdev_resize_partition

bdev_resize_partition can only operate on the whole device. Make that clear
by passing a gendisk instead of a block_device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210810154512.1809898-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: pass a gendisk to bdev_del_partition

bdev_del_partition can only operate on the whole device. Make that clear
by passing a gendisk instead of a block_device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210810154512.1809898-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: pass a gendisk to bdev_add_partition

bdev_add_partition can only operate on the whole device. Make that clear
by passing a gendisk instead of a block_device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210810154512.1809898-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: store a gendisk in struct parsed_partitions

Partition scanning only happens on the whole device, so pass a
struct gendisk instead of the whole device block_device to the scanners.
This allows to simplify printing the device name in various places as the
disk name is available in disk->name.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20210810154512.1809898-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove GENHD_FL_UP

Just check inode_unhashed on the whole device bdev inode instead,
and provide a helper to check for that information.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bcache: move the del_gendisk call out of bcache_device_free

Let the callers call del_gendisk so that we can check if add_disk
has been called properly for the cached device case instead of relying
on the block layer internal GENHD_FL_UP flag.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bcache: add proper error unwinding in bcache_device_init

Except for the IDA none of the allocations in bcache_device_init is
unwound on error, fix that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sx8: use the internal state machine to check if del_gendisk needs to be called

Remove usage of the block layer internal GENHD_FL_UP by just looking
at the host state.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvme: replace the GENHD_FL_UP check in nvme_mpath_shutdown_disk

Use the nvme-internal NVME_NSHEAD_DISK_LIVE flag instead of abusing
the block layer state.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvme: remove the GENHD_FL_UP check in nvme_ns_remove

Early probe failure never reaches nvme_ns_remove, so GENHD_FL_UP must
be set at this point. Remove the check.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

mmc: block: cleanup gendisk creation

Restructure mmc_blk_probe to avoid a failure path with a half created
disk.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210809064028.1198327-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

mmc: block: let device_add_disk create disk attributes

Pass the attribute group for the attributes on the gendisk to
device_add_disk so that they are created atomically with the
disk creation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210809064028.1198327-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: move some macros to blkdev.h

Move them (PAGE_SECTORS_SHIFT, PAGE_SECTORS and SECTOR_MASK) to the
generic header file to remove redundancy.

Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Link: https://lore.kernel.org/r/20210721025315.1729118-1-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>

writeback: make the laptop_mode prototypes available unconditionally

Fix the !CONFIG_BLOCK build after the recent cleanup.

Fixes: 5ed964f8e54e ("mm: hide laptop_mode_wb_timer entirely behind the BDI API")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: return ELEVATOR_DISCARD_MERGE if possible

When merging one bio to request, if they are discard IO and the queue
supports multi-range discard, we need to return ELEVATOR_DISCARD_MERGE
because both block core and related drivers(nvme, virtio-blk) doesn't
handle mixed discard io merge(traditional IO merge together with
discard merge) well.

Fix the issue by returning ELEVATOR_DISCARD_MERGE in this situation,
so both blk-mq and drivers just need to handle multi-range discard.

Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Fixes: 2705dfb20947 ("block: fix discard request merge")
Link: https://lore.kernel.org/r/20210729034226.1591070-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove the bd_bdi in struct block_device

Just retrieve the bdi from the disk.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: move the bdi from the request_queue to the gendisk

The backing device information only makes sense for file system I/O,
and thus belongs into the gendisk and not the lower level request_queue
structure. Move it there.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: add a queue_has_disk helper

Add a helper to check if a gendisk is associated with a request_queue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: pass a gendisk to blk_queue_update_readahead

.. and rename the function to disk_update_readahead. This is in
preparation for moving the BDI from the request_queue to the gendisk.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

mm: hide laptop_mode_wb_timer entirely behind the BDI API

Don't leak the detaіls of the timer into the block layer, instead
initialize the timer in bdi_alloc and delete it in bdi_unregister.
Note that this means the timer is initialized (but not armed) for
non-block queues as well now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove support for delayed queue registrations

Now that device mapper has been changed to register the disk once
it is fully ready all this code is unused.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: delay registering the gendisk

device mapper is currently the only outlier that tries to call
register_disk after add_disk, leading to fairly inconsistent state
of these block layer data structures. Instead change device-mapper
to just register the gendisk later now that the holder mechanism
can cope with that.

Note that this introduces a user visible change: the dm kobject is
now only visible after the initial table has been loaded.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: move setting md->type into dm_setup_md_queue

Move setting md->type from both callers into dm_setup_md_queue.
This ensures that md->type is only set to a valid value after the queue
has been fully setup, something we'll rely on future changes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: cleanup cleanup_mapped_device

md->queue is now always set when md->disk is set, so simplify the
conditionals a bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: support delayed holder registration

device mapper needs to register holders before it is ready to do I/O.
Currently it does so by registering the disk early, which can leave
the disk and queue in a weird half state where the queue is registered
with the disk, except for sysfs and the elevator. And this state has
been a bit promlematic before, and will get more so when sorting out
the responsibilities between the queue and the disk.

Support registering holders on an initialized but not registered disk
instead by delaying the sysfs registration until the disk is registered.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: look up holders by bdev

Invert they way the holder relations are tracked. This very
slightly reduces the memory overhead for partitioned devices.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210804094147.459763-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove the extra kobject reference in bd_link_disk_holder

Since commit 0d02129e76ed ("block: merge struct block_device and struct
hd_struct") there is no way for the bdev to go away as long as there is
a holder, so remove the extra references.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: make the block holder code optional

Move the block holder code into a separate file as it is not in any way
related to the other block_dev.c code, and add a new selectable config
option for it so that we don't have to build it without any remapped
drivers selected.

The Kconfig symbol contains a _DEPRECATED suffix to match the comments
added in commit 49731baa41df
("block: restore multiple bd_link_disk_holder() support").

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

loop: Select I/O scheduler 'none' from inside add_disk()

We noticed that the user interface of Android devices becomes very slow
under memory pressure. This is because Android uses the zram driver on top
of the loop driver for swapping, because under memory pressure the swap
code alternates reads and writes quickly, because mq-deadline is the
default scheduler for loop devices and because mq-deadline delays writes by
five seconds for such a workload with default settings. Fix this by making
the kernel select I/O scheduler 'none' from inside add_disk() for loop
devices. This default can be overridden at any time from user space,
e.g. via a udev rule. This approach has an advantage compared to changing
the I/O scheduler from userspace from 'mq-deadline' into 'none', namely
that synchronize_rcu() does not get called.

This patch changes the default I/O scheduler for loop devices from
'mq-deadline' into 'none'.

Additionally, this patch reduces the Android boot time on my test setup
with 0.5 seconds compared to configuring the loop I/O scheduler from user
space.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Martijn Coenen <maco@android.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210805174200.3250718-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: Introduce the BLK_MQ_F_NO_SCHED_BY_DEFAULT flag

elevator_get_default() uses the following algorithm to select an I/O
scheduler from inside add_disk():
- In case of a single hardware queue or if sharing hardware queues across
multiple request queues (BLK_MQ_F_TAG_HCTX_SHARED), use mq-deadline.
- Otherwise, use 'none'.

This is a good choice for most but not for all block drivers. Make it
possible to override the selection of mq-deadline with a new flag,
namely BLK_MQ_F_NO_SCHED_BY_DEFAULT.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Martijn Coenen <maco@android.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210805174200.3250718-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove blk-mq-sysfs dead code

In block/blk-mq-sysfs.c, struct blk_mq_ctx_sysfs_entry is not used to
define any attribute since the "mq" sysfs directory contains only
sub-directories (no attribute files). As a result, blk_mq_sysfs_show(),
blk_mq_sysfs_store(), and struct sysfs_ops blk_mq_sysfs_ops are all
unused and unnecessary. Remove all this unused code.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210713081837.524422-1-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

loop: raise media_change event

Make the loop device raise a DISK_MEDIA_CHANGE event on attach or detach.

# udevadm monitor -up |grep -e DISK_MEDIA_CHANGE -e DEVNAME &

# losetup -f zero
[    7.454235] loop0: detected capacity change from 0 to 16384
DISK_MEDIA_CHANGE=1
DEVNAME=/dev/loop0
DEVNAME=/dev/loop0
DEVNAME=/dev/loop0

# losetup -f zero
[   10.205245] loop1: detected capacity change from 0 to 16384
DISK_MEDIA_CHANGE=1
DEVNAME=/dev/loop1
DEVNAME=/dev/loop1
DEVNAME=/dev/loop1

# losetup -f zero2
[   13.532368] loop2: detected capacity change from 0 to 40960
DISK_MEDIA_CHANGE=1
DEVNAME=/dev/loop2
DEVNAME=/dev/loop2

# losetup -D
DEVNAME=/dev/loop1
DISK_MEDIA_CHANGE=1
DEVNAME=/dev/loop1
DEVNAME=/dev/loop2
DISK_MEDIA_CHANGE=1
DEVNAME=/dev/loop2
DEVNAME=/dev/loop0
DISK_MEDIA_CHANGE=1
DEVNAME=/dev/loop0

Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-7-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: add a helper to raise a media changed event

Refactor disk_check_events() and move some code into disk_event_uevent().
Then add disk_force_media_change(), a helper which will be used by
devices to force issuing a DISK_EVENT_MEDIA_CHANGE event.

Co-developed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-6-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: export diskseq in sysfs

Add a new sysfs handle to export the new diskseq value.
Place it in <sysfs>/block/<disk>/diskseq and document it.

    $ grep . /sys/class/block/*/diskseq
    /sys/class/block/loop0/diskseq:13
    /sys/class/block/loop1/diskseq:14
    /sys/class/block/loop2/diskseq:5
    /sys/class/block/loop3/diskseq:6
    /sys/class/block/ram0/diskseq:1
    /sys/class/block/ram1/diskseq:2
    /sys/class/block/vda/diskseq:7

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-5-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: add ioctl to read the disk sequence number

Add a new BLKGETDISKSEQ ioctl which retrieves the disk sequence number
from the genhd structure.

    # ./getdiskseq /dev/loop*
    /dev/loop0:     13
    /dev/loop0p1:   13
    /dev/loop0p2:   13
    /dev/loop0p3:   13
    /dev/loop1:     14
    /dev/loop1p1:   14
    /dev/loop1p2:   14
    /dev/loop2:     5
    /dev/loop3:     6

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-4-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: export the diskseq in uevents

Export the newly introduced diskseq in uevents:

    $ udevadm info /sys/class/block/* |grep -e DEVNAME -e DISKSEQ
    E: DEVNAME=/dev/loop0
    E: DISKSEQ=1
    E: DEVNAME=/dev/loop1
    E: DISKSEQ=2
    E: DEVNAME=/dev/loop2
    E: DISKSEQ=3
    E: DEVNAME=/dev/loop3
    E: DISKSEQ=4
    E: DEVNAME=/dev/loop4
    E: DISKSEQ=5
    E: DEVNAME=/dev/loop5
    E: DISKSEQ=6
    E: DEVNAME=/dev/loop6
    E: DISKSEQ=7
    E: DEVNAME=/dev/loop7
    E: DISKSEQ=8
    E: DEVNAME=/dev/nvme0n1
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p1
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p2
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p3
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p4
    E: DISKSEQ=9
    E: DEVNAME=/dev/nvme0n1p5
    E: DISKSEQ=9
    E: DEVNAME=/dev/sda
    E: DISKSEQ=10
    E: DEVNAME=/dev/sda1
    E: DISKSEQ=10
    E: DEVNAME=/dev/sda2
    E: DISKSEQ=10

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-3-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: add disk sequence number

Associating uevents with block devices in userspace is difficult and racy:
the uevent netlink socket is lossy, and on slow and overloaded systems
has a very high latency.
Block devices do not have exclusive owners in userspace, any process can
set one up (e.g. loop devices). Moreover, device names can be reused
(e.g. loop0 can be reused again and again). A userspace process setting
up a block device and watching for its events cannot thus reliably tell
whether an event relates to the device it just set up or another earlier
instance with the same name.

Being able to set a UUID on a loop device would solve the race conditions.
But it does not allow to derive orderings from uevents: if you see a
uevent with a UUID that does not match the device you are waiting for,
you cannot tell whether it's because the right uevent has not arrived yet,
or it was already sent and you missed it. So you cannot tell whether you
should wait for it or not.

Associating a unique, monotonically increasing sequential number to the
lifetime of each block device, which can be retrieved with an ioctl
immediately upon setting it up, allows to solve the race conditions with
uevents, and also allows userspace processes to know whether they should
wait for the uevent they need or if it was dropped and thus they should
move on.

Additionally, increment the disk sequence number when the media change,
i.e. on DISK_EVENT_MEDIA_CHANGE event.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-2-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove cmdline-parser.c

cmdline-parser.c is only used by the cmdline faux partition format,
so merge the code into that and avoid an indirect call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210728053756.409654-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove disk_name()

Remove the disk_name function now that all users are gone.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: simplify disk name formatting in check_partition

disk_name for partition 0 just copies out the disk_name field. Replace
the call to disk_name with a %s format specifier.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: simplify printing the device names disk_stack_limits

Printk ->disk_name directly for the disk and use the %pg format specifier
for the block device, which is equivalent to a bdevname call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: use the %pg format specifier in show_partition

Simplify printing the partition name by using the %pg format specifier
that is equivalent to a bdevname call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: use the %pg format specifier in printk_all_partitions

Simplify printing the partition name by using the %pg format specifier
that is equivalent to a bdevname call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: reduce stack usage in diskstats_show

I have compiled the kernel with a cross compiler "hppa-linux-gnu-" v9.3.0
on x86-64 host machine. I got the following warning:

block/genhd.c: In function ‘diskstats_show’:
block/genhd.c:1227:1: warning: the frame size of 1688 bytes is larger
than 1280 bytes [-Wframe-larger-than=]
1227 | }

By Reduced the stack footprint by using the %pg printk specifier instead
of disk_name to remove the need for the on-stack buffer.

Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove bdput

Now that we've stopped using inode references for anything meaninful
in the block layer get rid of the helper to put it and just open code
the call to iput on the block_device inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>