Merge branches 'clk-renesas', 'clk-cleanup' and 'clk-determine-divider' into clk-next

 - Migrate some clk drivers to clk_divider_ops.determine_rate

* clk-renesas:
  clk: renesas: Make CLK_R9A06G032 invisible
  clk: renesas: r9a07g044: Add entry for fixed clock P0_DIV2
  dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock
  clk: renesas: r9a07g044: Add clock and reset entries for ADC
  clk: renesas: r9a07g044: Add clock and reset entries for CANFD
  clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch]
  clk: renesas: r9a07g044: Add GPIO clock and reset entries
  clk: renesas: r9a07g044: Add SSIF-2 clock and reset entries
  clk: renesas: r9a07g044: Add USB clocks/resets
  clk: renesas: r9a07g044: Add DMAC clocks/resets
  clk: renesas: r9a07g044: Add I2C clocks/resets
  clk: renesas: r8a779a0: Add the DSI clocks
  clk: renesas: r8a779a0: Add the DU clock
  clk: renesas: rzg2: Rename i2c-dvfs to iic-pmic
  clk: renesas: rzg2l: Fix off-by-one check in rzg2l_cpg_clk_src_twocell_get()
  clk: renesas: rzg2l: Avoid mixing error pointers and NULL
  clk: renesas: rzg2l: Fix a double free on error
  clk: renesas: rzg2l: Fix return value and unused assignment
  clk: renesas: rzg2l: Remove unneeded semicolon

* clk-cleanup:
  clk: palmas: Add a missing SPDX license header
  clk: Align provider-specific CLK_* bit definitions

* clk-determine-divider:
  clk: stm32mp1: Switch to clk_divider.determine_rate
  clk: stm32h7: Switch to clk_divider.determine_rate
  clk: stm32f4: Switch to clk_divider.determine_rate
  clk: bcm2835: Switch to clk_divider.determine_rate
  clk: divider: Implement and wire up .determine_rate by default

Merge branches 'clk-qcom', 'clk-socfpga', 'clk-mediatek', 'clk-lmk' and 'clk-x86' into clk-next

 - Support video, gpu, display clks on qcom sc7280 SoCs
 - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs
 - Multimedia clks (MMCC) on qcom MSM8994/MSM8992
 - Migrate to clk_parent_data in gcc-sdm660
 - RPMh clks on qcom SM6350 SoCs
 - Support for Mediatek MT8192 SoCs

* clk-qcom: (38 commits)
  clk: qcom: Add SM6350 GCC driver
  dt-bindings: clock: Add SM6350 GCC clock bindings
  clk: qcom: rpmh: Add support for RPMH clocks on SM6350
  dt-bindings: clock: Add RPMHCC bindings for SM6350
  clk: qcom: adjust selects for SM_VIDEOCC_8150 and SM_VIDEOCC_8250
  clk: qcom: Add Global Clock controller (GCC) driver for SM6115
  dt-bindings: clk: qcom: gcc-sm6115: Document SM6115 GCC
  clk: qcom: mmcc-msm8994: Add MSM8992 support
  clk: qcom: Add msm8994 MMCC driver
  dt-bindings: clock: Add support for MSM8992/4 MMCC
  clk: qcom: Add Global Clock Controller driver for MSM8953
  dt-bindings: clock: add Qualcomm MSM8953 GCC driver bindings
  clk: qcom: gcc-sdm660: Replace usage of parent_names
  clk: qcom: gcc-sdm660: Move parent tables after PLLs
  clk: qcom: use devm_pm_runtime_enable and devm_pm_clk_create
  PM: runtime: add devm_pm_clk_create helper
  PM: runtime: add devm_pm_runtime_enable helper
  clk: qcom: a53-pll: Add MSM8939 a53pll support
  dt-bindings: clock: Update qcom,a53pll bindings for MSM8939 support
  clk: qcom: a53pll/mux: Use unique clock name
  ...

* clk-socfpga:
  clk: socfpga: agilex: add the bypass register for s2f_usr0 clock
  clk: socfpga: agilex: fix up s2f_user0_clk representation
  clk: socfpga: agilex: fix the parents of the psi_ref_clk

* clk-mediatek: (22 commits)
  clk: mediatek: make COMMON_CLK_MT8167* depend on COMMON_CLK_MT8167
  clk: mediatek: Add MT8192 vencsys clock support
  clk: mediatek: Add MT8192 vdecsys clock support
  clk: mediatek: Add MT8192 scp adsp clock support
  clk: mediatek: Add MT8192 msdc clock support
  clk: mediatek: Add MT8192 mmsys clock support
  clk: mediatek: Add MT8192 mfgcfg clock support
  clk: mediatek: Add MT8192 mdpsys clock support
  clk: mediatek: Add MT8192 ipesys clock support
  clk: mediatek: Add MT8192 imp i2c wrapper clock support
  clk: mediatek: Add MT8192 imgsys clock support
  clk: mediatek: Add MT8192 camsys clock support
  clk: mediatek: Add MT8192 audio clock support
  clk: mediatek: Add MT8192 basic clocks support
  clk: mediatek: Add mtk_clk_simple_probe() to simplify clock providers
  clk: mediatek: Add configurable enable control to mtk_pll_data
  clk: mediatek: Fix asymmetrical PLL enable and disable control
  clk: mediatek: Get regmap without syscon compatible check
  clk: mediatek: Add dt-bindings of MT8192 clocks
  dt-bindings: ARM: Mediatek: Add audsys document binding for MT8192
  ...

* clk-lmk:
  clk: lmk04832: drop redundant fallthrough statements

* clk-x86:
  clk: x86: Rename clk-lpt to more specific clk-lpss-atom

clk: qcom: Add SM6350 GCC driver

This adds Global Clock controller (GCC) driver for SM6350 SoC

Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210820203624.232268-3-konrad.dybcio@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add SM6350 GCC clock bindings

Add device tree bindings for global clock controller on SM6350 SoC.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210820203624.232268-2-konrad.dybcio@somainline.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: rpmh: Add support for RPMH clocks on SM6350

Add support for RPMH clocks on SM6350 SoCs.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210820203243.230157-3-konrad.dybcio@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add RPMHCC bindings for SM6350

Add bindings and update documentation for clock rpmh driver on SM6350.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210820203243.230157-2-konrad.dybcio@somainline.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: adjust selects for SM_VIDEOCC_8150 and SM_VIDEOCC_8250

Commit 5658e8cf1a8a ("clk: qcom: add video clock controller driver for
SM8150") and commit 0e94711a1f29 ("clk: qcom: add video clock controller
driver for SM8250") add config SM_VIDEOCC_8150 and config SM_VIDEOCC_8250,
which select the non-existing configs SDM_GCC_8150 and SDM_GCC_8250,
respectively.

Hence, ./scripts/checkkconfigsymbols.py warns:

SDM_GCC_8150
Referencing files: drivers/clk/qcom/Kconfig

SDM_GCC_8250
Referencing files: drivers/clk/qcom/Kconfig

It is probably just a typo (or naming confusion of using SM_GCC_xxx and
SDM_GCC_xxx for various Qualcomm clock drivers) in the config definitions
for config SM_VIDEOCC_8150 and SM_VIDEOCC_8250, and intends to select the
existing SM_GCC_8150 and SM_GCC_8250, respectively.

Adjust the selects to the existing configs.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210816135930.11810-1-lukas.bulwahn@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add Global Clock controller (GCC) driver for SM6115

Add support for the global clock controller found on SM6115
based devices. This should allow most non-multimedia device
drivers to probe and control their clocks.

Based on CAF implementation. GDSCs ported from downstream DT.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210805161107.1194521-3-iskren.chernev@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clk: qcom: gcc-sm6115: Document SM6115 GCC

Add device tree bindings for global clock controller on SM6115 and
SM4250 SoCs (pin and software compatible).

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210805161107.1194521-2-iskren.chernev@gmail.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: mmcc-msm8994: Add MSM8992 support

MSM8992 features less clocks & GDSCS and has different
freq tables for some of them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210618111435.595689-3-konrad.dybcio@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add msm8994 MMCC driver

Add a driver for managing MultiMedia SubSystem clocks on msm8994
and its derivatives.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210618111435.595689-2-konrad.dybcio@somainline.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add support for MSM8992/4 MMCC

Document the multimedia clock controller found on MSM8992/4.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210618111435.595689-1-konrad.dybcio@somainline.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add Global Clock Controller driver for MSM8953

This driver provides clocks, resets and power domains for MSM8953
and compatible SoCs: APQ8053, SDM450, SDA450, SDM632, SDA632.

Signed-off-by: Vladimir Lypak <junak.pub@gmail.com>
Signed-off-by: Adam Skladowski <a_skl39@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Sireesh Kodali <sireeshkodali@protonmail.com>
Link: https://lore.kernel.org/r/IPvVnyRWbHuQFswiFz0W08Kj1dKoH55ddQVyIIPhMJw@cp7-web-043.plabs.ch
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: add Qualcomm MSM8953 GCC driver bindings

Add bindings and compatible to document MSM8953 GCC (Global Clock
Controller) driver.

Signed-off-by: Vladimir Lypak <junak.pub@gmail.com>
Signed-off-by: Adam Skladowski <a_skl39@protonmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali@protonmail.com>
Link: https://lore.kernel.org/r/Q6uB3NRxqtD8Prsmliv8ZdsTXGeviv7lb2jQ743jr1E@cp4-web-036.plabs.ch
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc-sdm660: Replace usage of parent_names

Using parent_data and parent_hws, instead of parent_names, does protect
against some cases of incompletely defined clock trees. While it turns
out that the bug being chased this time was totally unrelated, this
patch converts the SDM660 GCC driver to avoid such issues.

The "xo" fixed_factor clock is unused within the gcc driver, but
referenced from the DSI PHY. So it's left in place until the DSI driver
is updated.

Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210825204517.1278130-1-bjorn.andersson@linaro.org
[sboyd@kernel.org: Reduce diff by moving enum and tables back to
original position in previous patch]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc-sdm660: Move parent tables after PLLs

In the next patch we're going to change these tables to reference the
PLL structures directly. Let's move them here so the diff is easier to
read. No functional change in this patch.

Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: use devm_pm_runtime_enable and devm_pm_clk_create

Use two new helpers instead of pm_runtime_enable() and pm_clk_create(),
removing the need for calling pm_runtime_disable and pm_clk_destroy().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210731195034.979084-4-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

PM: runtime: add devm_pm_clk_create helper

A typical code pattern for pm_clk_create() call is to call it in the
_probe function and to call pm_clk_destroy() both from _probe error path
and from _remove function. For some drivers the whole remove function
would consist of the call to pm_remove_disable().

Add helper function to replace this bolierplate piece of code. Calling
devm_pm_clk_create() removes the need for calling pm_clk_destroy() both
in the probe()'s error path and in the remove() function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210731195034.979084-3-dmitry.baryshkov@linaro.org
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

PM: runtime: add devm_pm_runtime_enable helper

A typical code pattern for pm_runtime_enable() call is to call it in the
_probe function and to call pm_runtime_disable() both from _probe error
path and from _remove function. For some drivers the whole remove
function would consist of the call to pm_remove_disable().

Add helper function to replace this bolierplate piece of code. Calling
devm_pm_runtime_enable() removes the need for calling
pm_runtime_disable() both in the probe()'s error path and in the
remove() function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210731195034.979084-2-dmitry.baryshkov@linaro.org
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'renesas-clk-for-v5.15-tag2' of git://git./linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull more Renesas clk driver updates from Geert Uytterhoeven:

 - Make CLK_R9A06G032 invisible

* tag 'renesas-clk-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: Make CLK_R9A06G032 invisible

clk: renesas: Make CLK_R9A06G032 invisible

When configuring a kernel including support for Renesas ARM/ARM64 Socs,
but excluding support for the RZ/N1D SoC, the user is always asked about
the RZ/N1D clock driver.  As this driver is already auto-selected when
building a kernel including support for the RZ/N1D SoC, there is no need
to make the CLK_R9A06G032 symbol visible, unless compile-testing.

Align the symbol description with the other symbols.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/4f3d30c730c30546f702715ffc648922a8156703.1628672649.git.geert+renesas@glider.be

clk: qcom: a53-pll: Add MSM8939 a53pll support

MSM8939 has 3 a53pll clocks with different frequency table for Cluster0,
Cluster1 and CCI.  It adds function qcom_a53pll_get_freq_tbl() to create
pll_freq_tbl from OPP, so that those a53pll frequencies can be defined
in DT with operating-points-v2 bindings rather than being coded in the
driver.  In this case, one compatible rather than three would be needed
for these 3 a53pll clocks.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210704024032.11559-5-shawn.guo@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Update qcom,a53pll bindings for MSM8939 support

Update qcom,a53pll bindings for MSM8939 support:

 - Add optional operating-points-v2 property
 - Add MSM8939 specific compatible

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210704024032.11559-4-shawn.guo@linaro.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: a53pll/mux: Use unique clock name

Different from MSM8916 which has only one a53pll/mux clock, MSM8939 gets
three for Cluster0 (little cores), Cluster1 (big cores) and CCI (Cache
Coherent Interconnect).  That said, a53pll/mux clock needs to be named
uniquely.  Append @unit-address of device node to the clock name, so
that a53pll/mux will be named like below on MSM8939.

  a53pll@b016000
  a53pll@b116000
  a53pll@b1d0000

  a53mux@b1d1000
  a53mux@b011000
  a53mux@b111000

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210704024032.11559-3-shawn.guo@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: apcs-msm8916: Flag a53mux instead of a53pll as critical

The clock source for MSM8916 cpu cores is like below.

                        |\
         a53pll --------| \ a53mux     +------+
                        | |------------| cpus |
     gpll0_vote --------| /            +------+
                        |/

So a53mux rather than a53pll is actually the parent clock of cpu cores.
It makes more sense to flag a53mux as critical instead, so that when
either a53pll or gpll0_vote is used by cpu cores, the clock will be kept
enabled while the other can be disabled.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210704024032.11559-2-shawn.guo@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gpucc-sm8150: Add SC8180x support

The GPU clock controller found in SC8180x is a variant of the same block
found in SM8150, but with one additional clock frequency for the
gmu_clk_src clock.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210721225329.3035779-1-bjorn.andersson@linaro.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: smd-rpm: Add mdm9607 clocks

Add support for RPM-managed clocks on the MDM9607 platform.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210805222400.39027-2-konrad.dybcio@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: qcom: rpmcc: Document MDM9607 compatible

Add the dt-binding for the RPM Clock Controller on the MDM9607 SoC.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210805222400.39027-1-konrad.dybcio@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: rpmcc: Add support for MSM8953 RPM clocks.

Add definitions for RPM clocks used on MSM8953 platform.

Signed-off-by: Vladimir Lypak <junak.pub@gmail.com>
Signed-off-by: Adam Skladowski <a_skl39@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Sireesh Kodali <sireeshkodali@protonmail.com>
Link: https://lore.kernel.org/r/QZ0fkozlubDdc7CvqjZPhAviFmjJ28ht7Y4PT3rYM@cp4-web-038.plabs.ch
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: qcom-rpmcc: Add compatible for MSM8953 SoC

Add compatible for MSM8953 SoC.

Signed-off-by: Vladimir Lypak <junak.pub@gmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali@protonmail.com>
Link: https://lore.kernel.org/r/c662hoLme5MIdelk5BVPsVgN77IqTLS0KwYwpauJiDs@cp3-web-047.plabs.ch
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: smd: Add support for SM6115 rpm clocks

Add rpm smd clocks, PMIC and bus clocks which are required on
SM4250/6115 for clients to vote on.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210731164827.2756798-2-iskren.chernev@gmail.com
[sboyd@kernel.org: Drop duplicate define, merge with sm6125 support]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: smd: Add support for SM6125 rpm clocks

Add rpm smd clocks, PMIC and bus clocks which are required on SM6125
for clients to vote on.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210730215924.733350-2-martin.botka@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: stm32mp1: Switch to clk_divider.determine_rate

.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-7-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: stm32h7: Switch to clk_divider.determine_rate

.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-6-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: stm32f4: Switch to clk_divider.determine_rate

.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-5-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: bcm2835: Switch to clk_divider.determine_rate

.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.

Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-rpi-kernel@lists.infradead.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-4-martin.blumenstingl@googlemail.com
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: divider: Implement and wire up .determine_rate by default

.determine_rate is meant to replace .round_rate. The former comes with a
benefit which is especially relevant on 32-bit systems: since
.determine_rate uses an "unsigned long" (compared to a "signed long"
which is used by .round_rate) the maximum value on 32-bit systems
increases from 2^31 (or approx. 2.14GHz) to 2^32 (or approx. 4.29GHz).

Implement .determine_rate in addition to .round_rate so drivers that are
using clk_divider_{ro_,}ops can benefit from this by default. Keep the
.round_rate callback for now since some drivers rely on
clk_divider_ops.round_rate being implemented.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-2-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: palmas: Add a missing SPDX license header

Add the missing SPDX license header to drivers/clk/clk-palmas.c.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Link: https://lore.kernel.org/r/20210731132226.424853-1-wangborong@cdjrlc.com
[sboyd@kernel.org: Also remove boilerplate from comment]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: Align provider-specific CLK_* bit definitions

The definition of CLK_MULTIPLIER_ROUND_CLOSEST is not aligned to the two
bit definitions next to it.  A deeper inspection reveals that the
alignment of CLK_MULTIPLIER_ROUND_CLOSEST does match the most common
alignment.

Align the bit definitions for the various provider types throughout the
file at 40 columns, to increase uniformity.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5468cd9e50cda8fc59cb6baab9413c6c0de1a974.1626257689.git.geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'renesas-clk-for-v5.15-tag1' of git://git./linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

 - Add display (DU and DSI) clocks on R-Car V3U
 - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
  resets on RZ/G2L
 - Miscellaneous fixes and improvements

* tag 'renesas-clk-for-v5.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r9a07g044: Add entry for fixed clock P0_DIV2
  dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock
  clk: renesas: r9a07g044: Add clock and reset entries for ADC
  clk: renesas: r9a07g044: Add clock and reset entries for CANFD
  clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch]
  clk: renesas: r9a07g044: Add GPIO clock and reset entries
  clk: renesas: r9a07g044: Add SSIF-2 clock and reset entries
  clk: renesas: r9a07g044: Add USB clocks/resets
  clk: renesas: r9a07g044: Add DMAC clocks/resets
  clk: renesas: r9a07g044: Add I2C clocks/resets
  clk: renesas: r8a779a0: Add the DSI clocks
  clk: renesas: r8a779a0: Add the DU clock
  clk: renesas: rzg2: Rename i2c-dvfs to iic-pmic
  clk: renesas: rzg2l: Fix off-by-one check in rzg2l_cpg_clk_src_twocell_get()
  clk: renesas: rzg2l: Avoid mixing error pointers and NULL
  clk: renesas: rzg2l: Fix a double free on error
  clk: renesas: rzg2l: Fix return value and unused assignment
  clk: renesas: rzg2l: Remove unneeded semicolon

dt-bindings: clk: qcom: smd-rpm: Document SM6125 compatible

Document the newly added compatible for sm6125 rpmcc.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210629102624.194378-3-martin.botka@somainline.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: qcom: rpmcc: Document SM6115 compatible

Add the dt-binding for the RPM Clock Controller on the SM4250/6115 SoCs.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210627185927.695411-3-iskren.chernev@gmail.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: x86: Rename clk-lpt to more specific clk-lpss-atom

The LPT stands for Lynxpoint PCH. However the driver is used on a few
Intel Atom SoCs. Rename it to reflect this in a way how another clock
driver, i.e. clk-pmc-atom, is called.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210722193450.35321-1-andriy.shevchenko@linux.intel.com
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: lmk04832: drop redundant fallthrough statements

When the body of a case statement is empty, it is well understood that
it is intentional and explicit fallthrough statements are not required.
Drop them.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20210708211645.3621902-1-liambeguin@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: make COMMON_CLK_MT8167* depend on COMMON_CLK_MT8167

I found that COMMON_CLK_MT8167* do not depend on COMMON_CLK_MT8167,
so it is possible to config:

CONFIG_COMMON_CLK_MT8167=n
CONFIG_COMMON_CLK_MT8167_*=y

Although it does not cause build breaks with such configuration,
I think it is clearer to make COMMON_CLK_MT8167* depend on
COMMON_CLK_MT8167.

Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210716051732.3422-1-miles.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: dispcc-sm8250: Add additional parent clocks for DP

The clock controller has two additional clock source pairs, in order to
support more than a single DisplayPort PHY. List these, so it's possible
to describe them all.

Also drop the unnecessary freq_tbl for the link clock sources, to allow
these parents to be used.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210721224610.3035258-1-bjorn.andersson@linaro.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8192 vencsys clock support

Add MT8192 vencsys clock provider

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-22-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8192 vdecsys clock support

Add MT8192 vdecsys and vdecsys soc clock providers

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-21-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8192 scp adsp clock support

Add MT8192 scp adsp clock provider

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-20-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8192 msdc clock support

Add MT8192 msdc and msdc top clock providers

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-19-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8192 mmsys clock support

Add MT8192 mmsys clock provider

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20210726105719.15793-18-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8192 mfgcfg clock support

Add MT8192 mfgcfg clock provider

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-17-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8192 mdpsys clock support

Add MT8192 mdpsys clock provider

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-16-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8192 ipesys clock support

Add MT8192 ipesys clock provider

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-15-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8192 imp i2c wrapper clock support

Add MT8192 imp i2c wrapper clock provider

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-14-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8192 imgsys clock support

Add MT8192 imgsys and imgsys2 clock providers

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-13-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8192 camsys clock support

Add MT8192 camsys and camsys raw clock providers

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-12-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8192 audio clock support

Add MT8192 audio clock provider

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-11-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add MT8192 basic clocks support

Add MT8192 basic clock providers, include topckgen, apmixedsys,
infracfg and pericfg.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-10-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add mtk_clk_simple_probe() to simplify clock providers

Most of subsystem clock providers only need to register clock gates
in their probe() function.
To reduce the duplicated code by add a generic function.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-9-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add configurable enable control to mtk_pll_data

In all MediaTek PLL design, bit0 of CON0 register is always
the enable bit.
However, there's a special case of usbpll on MT8192.
The enable bit of usbpll is moved to bit2 of other register.
Add configurable en_reg and pll_en_bit for enable control or
default 0 where pll data are static variables.
Hence, CON0_BASE_EN could also be removed.
And there might have another special case on other chips,
the enable bit is still on CON0 register but not at bit0.

Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-8-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Fix asymmetrical PLL enable and disable control

In fact, the en_mask is a combination of divider enable mask
and pll enable bit(bit0).
Before this patch, we enabled both divider mask and bit0 in prepare(),
but only cleared the bit0 in unprepare().
In the future, we hope en_mask will only be used as divider enable mask.
The enable register(CON0) will be set in 2 steps:
first is divider mask, and then bit0 during prepare(), and vice versa.
But considering backward compatibility, at this stage we allow en_mask
to be a combination or a pure divider enable mask.
And then we will make en_mask a pure divider enable mask in another
following patch series.

Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-7-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Get regmap without syscon compatible check

Not all clock providers need to be marked compatible with "syscon"
for system configuration usage, so use device_node_to_regmap() to
skip "syscon" check.

Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-6-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add dt-bindings of MT8192 clocks

Add MT8192 clock dt-bindings, include topckgen, apmixedsys,
infracfg, pericfg and subsystem clocks.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210726105719.15793-5-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: ARM: Mediatek: Add audsys document binding for MT8192

This patch adds the audsys document binding for MT8192 SoC.

Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210726105719.15793-4-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: ARM: Mediatek: Add mmsys document binding for MT8192

This patch adds the mmsys document binding for MT8192 SoC.

Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210726105719.15793-3-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: ARM: Mediatek: Add new document bindings of MT8192 clock

This patch adds the new binding documentation for system clock
and functional clock on Mediatek MT8192.

Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210726105719.15793-2-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: socfpga: agilex: add the bypass register for s2f_usr0 clock

Add the bypass register for the s2f_user0_clk.

Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-3-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: socfpga: agilex: fix up s2f_user0_clk representation

Correct the s2f_user0_mux clock representation.

Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-2-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: socfpga: agilex: fix the parents of the psi_ref_clk

The psi_ref_clk comes from the C2 node of the main_pll and periph_pll,
not the C3.

Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: renesas: r9a07g044: Add entry for fixed clock P0_DIV2

Add entry for fixed core clock P0_DIV2 and assign LAST_DT_CORE_CLK
to R9A07G044_CLK_P0_DIV2.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210719143811.2135-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Merge tag 'renesas-r9a07g044-dt-binding-defs-tag2' into renesas-clk-for-v5.15

Renesas RZ/G2L DT Binding Definitions Update

Missing definition for the P0_DIV2 core clock on the Renesas RZ/G2L
(R9A07G044) SoC, shared by driver and DT source files.

dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock

Add P0_DIV2 core clock required for CANFD module. CANFD core clock is
sourced from P0_DIV2 referenced from HW manual Rev.0.50.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210719143811.2135-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: qcom: Add video clock controller driver for SC7280

Add support for the video clock controller found on SC7280
based devices. This would allow video drivers to probe and
control their clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-8-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add SC7280 VideoCC clock binding

Add device tree bindings for video clock subsystem clock
controller for Qualcomm Technology Inc's SC7280 SoCs.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-7-git-send-email-tdas@codeaurora.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add graphics clock controller driver for SC7280

Add support for the graphics clock controller found on SC7280
based devices. This would allow graphics drivers to probe and
control their clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-6-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add SC7280 GPUCC clock binding

Add device tree bindings for graphics clock subsystem clock
controller for Qualcomm Technology Inc's SC7280 SoCs.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-5-git-send-email-tdas@codeaurora.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: Add display clock controller driver for SC7280

Add support for the display clock controller found on SC7280
based devices. This would allow display drivers to probe and
control their clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-4-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: Add SC7280 DISPCC clock binding

Add device tree bindings for display clock controller subsystem for
Qualcomm Technology Inc's SC7280 SoCs.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-3-git-send-email-tdas@codeaurora.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clock: qcom: Update license for GCC SC7280

Update BSD license for GCC clock ids.

Fixes: 87a3d523b38c ("dt-bindings: clock: Add SC7280 GCC clock binding")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-2-git-send-email-tdas@codeaurora.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: renesas: r9a07g044: Add clock and reset entries for ADC

Add clock and reset entries for ADC block in CPG driver.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210719085840.21842-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r9a07g044: Add clock and reset entries for CANFD

Add clock and reset entries for CANFD in CPG driver.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210715182123.23372-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch]

Rename renesas-rzg2l-cpg.c and renesas-rzg2l-cpg.h to rzg2l-cpg.c resp.
rzg2l-cpg.h, for consistency with other (sub)drivers.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/edc442daaedffcf10e835ff479d906fcae0e59db.1626268821.git.geert+renesas@glider.be

clk: renesas: r9a07g044: Add GPIO clock and reset entries

Add GPIO clock and reset entries in CPG driver.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210712194422.12405-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r9a07g044: Add SSIF-2 clock and reset entries

Add SSIF-2 clock and reset entries in CPG driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210702135010.5937-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r9a07g044: Add USB clocks/resets

Add clock/reset entries for USB PHY control, USB2.0 host and device.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210630073013.22415-5-biju.das.jz@bp.renesas.com
[geert: s/usb0_device/usb0_func]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r9a07g044: Add DMAC clocks/resets

Add DMAC clock and reset entries in CPG driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-10-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r9a07g044: Add I2C clocks/resets

Add I2C{0,1,2,3} clock and reset entries.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-9-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r8a779a0: Add the DSI clocks

The DSI clock is incorrectly defined as a fixed clock. This
demonstrates itself as the dsi-encoders failing to correctly enable and
start their PPI and HS clocks internally, and causes failures.

Move the DSI parent clock to match the updates in the BSP, which
resolves the initialisation procedures.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Fixes: 17bcc8035d2d19fc ("clk: renesas: cpg-mssr: Add support for R-Car V3U")
Link: https://lore.kernel.org/r/20210622232711.3219697-3-kieran.bingham@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: r8a779a0: Add the DU clock

The DU clock is added to the S3D1 clock parent. The Renesas BSP lists
S2D1 as the clock parent, however there is no S2 clock on this platform.

S3D1 is chosen as a best effort guess and demonstrates functionality but
is not guaranteed to be correct.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20210622232711.3219697-2-kieran.bingham@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: rzg2: Rename i2c-dvfs to iic-pmic

As RZ/G2 SoCs do not support DVFS, the "iic-dvfs" module was renamed to
"iic-pmic" in the RZ/G Series, 2nd Generation User’s Manual: Hardware
Rev. 1.00.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/3e549b41989ff2797b998a1c749c9f607845f44a.1624016693.git.geert+renesas@glider.be

clk: renesas: rzg2l: Fix off-by-one check in rzg2l_cpg_clk_src_twocell_get()

Fix clock index out of range check for module clocks in
rzg2l_cpg_clk_src_twocell_get().

Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210617155432.18827-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: rzg2l: Avoid mixing error pointers and NULL

These functions accidentally return both error pointers and NULL when
there is an error.  It doesn't cause a problem but it is confusing and
seems unintentional.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/YMtY7nOtqEvTokh7@mwanda
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: rzg2l: Fix a double free on error

The "pll_clk" and "clock" pointers are allocated with devm_kzalloc() so
freeing them with kfree() will lead to a double free.  This would only
happen if probe failed, and the system is not bootable.

Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/YMtYs7LVveYH4eRe@mwanda
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: rzg2l: Fix return value and unused assignment

Currently the function returns NULL on error, so exact error code is
lost.  This patch changes return convention of the function to use
ERR_PTR() on error instead.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623896524-102058-1-git-send-email-yang.lee@linux.alibaba.com
[geert: Drop curly braces]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

clk: renesas: rzg2l: Remove unneeded semicolon

Eliminate the following coccicheck warning:
./drivers/clk/renesas/renesas-rzg2l-cpg.c:299:2-3: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623749970-38020-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Linux 5.14-rc2

Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git./linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs
   are offlined.

 - Fix 'perf test' problems related to the recently added hybrid
   (BIG/little) code.

 - Split ARM's coresight (hw tracing) decode by aux records to avoid
   fatal decoding errors.

 - Fix add event failure in 'perf probe' when running 32-bit perf in a
   64-bit kernel.

 - Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set.

 - Fix memory and refcount leaks detected by ASAn when running 'perf
   test', should be clean of warnings now.

 - Remove broken definition of __LITTLE_ENDIAN from tools'
   linux/kconfig.h, which was breaking the build in some systems.

 - Cast PTHREAD_STACK_MIN to int as it may turn into 'long
   sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some
   systems.

 - Fix libperf build error with LIBPFM4=1.

 - Sync UAPI files changed by the memfd_secret new syscall.

* tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits)
  perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set
  perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel
  perf data: Close all files in close_dir()
  perf probe-file: Delete namelist in del_events() on the error path
  perf test bpf: Free obj_buf
  perf trace: Free strings in trace__parse_events_option()
  perf trace: Free syscall tp fields in evsel->priv
  perf trace: Free syscall->arg_fmt
  perf trace: Free malloc'd trace fields on exit
  perf lzma: Close lzma stream on exit
  perf script: Fix memory 'threads' and 'cpus' leaks on exit
  perf script: Release zstd data
  perf session: Cleanup trace_event
  perf inject: Close inject.output on exit
  perf report: Free generated help strings for sort option
  perf env: Fix memory leak of cpu_pmu_caps
  perf test maps__merge_in: Fix memory leak of maps
  perf dso: Fix memory leak in dso__new_map()
  perf test event_update: Fix memory leak of unit
  perf test event_update: Fix memory leak of evlist
  ...

Merge tag 'xfs-5.14-fixes-1' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "A few fixes for issues in the new online shrink code, additional
  corrections for my recent bug-hunt w.r.t. extent size hints on
  realtime, and improved input checking of the GROWFSRT ioctl.

  IOW, the usual 'I somehow got bored during the merge window and
  resumed auditing the farther reaches of xfs':

   - Fix shrink eligibility checking when sparse inode clusters enabled

   - Reset '..' directory entries when unlinking directories to prevent
     verifier errors if fs is shrinked later

   - Don't report unusable extent size hints to FSGETXATTR

   - Don't warn when extent size hints are unusable because the sysadmin
     configured them that way

   - Fix insufficient parameter validation in GROWFSRT ioctl

   - Fix integer overflow when adding rt volumes to filesystem"

* tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: detect misaligned rtinherit directory extent size hints
  xfs: fix an integer overflow error in xfs_growfs_rt
  xfs: improve FSGROWFSRT precondition checking
  xfs: don't expose misaligned extszinherit hints to userspace
  xfs: correct the narrative around misaligned rtinherit/extszinherit dirs
  xfs: reset child dir '..' entry when unlinking child
  xfs: check for sparse inode clusters that cross new EOAG when shrinking

Merge tag 'iomap-5.14-fixes-1' of git://git./fs/xfs/xfs-linux

Pull iomap fixes from Darrick Wong:
 "A handful of bugfixes for the iomap code.

  There's nothing especially exciting here, just fixes for UBSAN (not
  KASAN as I erroneously wrote in the tag message) warnings about
  undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some
  reshuffling of per-page block state info to fix some problems with
  gfs2.

   - Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE

   - Fix assertion errors when using inlinedata files on gfs2"

* tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor
  iomap: Don't create iomap_page objects for inline files
  iomap: Permit pages without an iop to enter writeback
  iomap: remove the length variable in iomap_seek_hole
  iomap: remove the length variable in iomap_seek_data