treewide: Fix typos in printk

This patch fix multiple spelling typos found in
various part of kernel.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c
index b62e2f5..cf7b7d4 100644 (file)
--- a/drivers/firmware/efi/libstub/fdt.c
+++ b/drivers/firmware/efi/libstub/fdt.c
@@ -253,7 +253,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table,
                        sys_table->boottime->free_pool(memory_map);
                        new_fdt_size += EFI_PAGE_SIZE;
                } else {
-                       pr_efi_err(sys_table, "Unable to constuct new device tree.\n");
+                       pr_efi_err(sys_table, "Unable to construct new device tree.\n");
                        goto fail_free_mmap;
                }
        }

diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index debc39d..9a389a0 100644 (file)
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -449,7 +449,7 @@ static void act_open_req_arp_failure(void *handle, struct sk_buff *skb)
 {
        struct c4iw_ep *ep = handle;
 
-       printk(KERN_ERR MOD "ARP failure duing connect\n");
+       printk(KERN_ERR MOD "ARP failure during connect\n");
        kfree_skb(skb);
        connect_reply_upcall(ep, -EHOSTUNREACH);
        state_set(&ep->com, DEAD);

diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index f8e5db0..2ea12c6 100644 (file)
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -549,13 +549,13 @@ static void *raid0_takeover_raid10(struct mddev *mddev)
         *  - all mirrors must be already degraded
         */
        if (mddev->layout != ((1 << 8) + 2)) {
-               printk(KERN_ERR "md/raid0:%s:: Raid0 cannot takover layout: 0x%x\n",
+               printk(KERN_ERR "md/raid0:%s:: Raid0 cannot takeover layout: 0x%x\n",
                       mdname(mddev),
                       mddev->layout);
                return ERR_PTR(-EINVAL);
        }
        if (mddev->raid_disks & 1) {
-               printk(KERN_ERR "md/raid0:%s: Raid0 cannot takover Raid10 with odd disk number.\n",
+               printk(KERN_ERR "md/raid0:%s: Raid0 cannot takeover Raid10 with odd disk number.\n",
                       mdname(mddev));
                return ERR_PTR(-EINVAL);
        }

diff --git a/drivers/media/common/saa7146/saa7146_video.c b/drivers/media/common/saa7146/saa7146_video.c
index 3077949..079f520 100644 (file)
--- a/drivers/media/common/saa7146/saa7146_video.c
+++ b/drivers/media/common/saa7146/saa7146_video.c
@@ -502,7 +502,7 @@ static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuf
        /* check if overlay is running */
        if (IS_OVERLAY_ACTIVE(fh) != 0) {
                if (vv->video_fh != fh) {
-                       DEB_D("refusing to change framebuffer informations while overlay is active in another open\n");
+                       DEB_D("refusing to change framebuffer information while overlay is active in another open\n");
                        return -EBUSY;
                }
        }

diff --git a/drivers/media/dvb-frontends/m88ds3103.c b/drivers/media/dvb-frontends/m88ds3103.c
index feeeb70..ce73a5e 100644 (file)
--- a/drivers/media/dvb-frontends/m88ds3103.c
+++ b/drivers/media/dvb-frontends/m88ds3103.c
@@ -685,7 +685,7 @@ static int m88ds3103_init(struct dvb_frontend *fe)
        /* request the firmware, this will block and timeout */
        ret = request_firmware(&fw, fw_file, &client->dev);
        if (ret) {
-               dev_err(&client->dev, "firmare file '%s' not found\n", fw_file);
+               dev_err(&client->dev, "firmware file '%s' not found\n", fw_file);
                goto err;
        }
 

diff --git a/drivers/media/dvb-frontends/si2165.c b/drivers/media/dvb-frontends/si2165.c
index 7c2eeee..1fcd925 100644 (file)
--- a/drivers/media/dvb-frontends/si2165.c
+++ b/drivers/media/dvb-frontends/si2165.c
@@ -511,7 +511,7 @@ static int si2165_upload_firmware(struct si2165_state *state)
                                           &offset, block_count);
        if (ret < 0) {
                dev_err(&state->i2c->dev,
-                       "%s: firmare could not be uploaded\n",
+                       "%s: firmware could not be uploaded\n",
                        KBUILD_MODNAME);
                goto error;
        }
@@ -535,7 +535,7 @@ static int si2165_upload_firmware(struct si2165_state *state)
 
        if (len != offset) {
                dev_err(&state->i2c->dev,
-                       "%s: firmare len mismatch %04x != %04x\n",
+                       "%s: firmware len mismatch %04x != %04x\n",
                        KBUILD_MODNAME, len, offset);
                ret = -EINVAL;
                goto error;

diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
index 83c90d3..487129b 100644 (file)
--- a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
+++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
@@ -388,7 +388,7 @@ static int netup_unidvb_dvb_init(struct netup_unidvb_dev *ndev,
                vb2_dvb_alloc_frontend(
                        &ndev->frontends[num], 3) == NULL) {
                dev_dbg(&ndev->pci_dev->dev,
-                       "%s(): unable to to alllocate vb2_dvb_frontend\n",
+                       "%s(): unable to allocate vb2_dvb_frontend\n",
                        __func__);
                return -ENOMEM;
        }

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index d962164..6b84c0d 100644 (file)
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1229,7 +1229,7 @@ static void i40evf_configure_rss_aq(struct i40e_vsi *vsi, const u8 *seed)
 
        if (adapter->current_op != I40E_VIRTCHNL_OP_UNKNOWN) {
                /* bail because we already have a command pending */
-               dev_err(&adapter->pdev->dev, "Cannot confiure RSS, command %d pending\n",
+               dev_err(&adapter->pdev->dev, "Cannot configure RSS, command %d pending\n",
                        adapter->current_op);
                return;
        }

diff --git a/drivers/soc/ti/knav_dma.c b/drivers/soc/ti/knav_dma.c
index bc1b80e..1a7b5ca 100644 (file)
--- a/drivers/soc/ti/knav_dma.c
+++ b/drivers/soc/ti/knav_dma.c
@@ -389,7 +389,7 @@ static int of_channel_match_helper(struct device_node *np, const char *name,
        *dma_instance = dma_node->name;
        index = of_property_match_string(np, "ti,navigator-dma-names", name);
        if (index < 0) {
-               dev_err(kdev->dev, "No 'ti,navigator-dma-names' propery\n");
+               dev_err(kdev->dev, "No 'ti,navigator-dma-names' property\n");
                return -ENODEV;
        }
 

diff --git a/sound/drivers/pcm-indirect2.c b/sound/drivers/pcm-indirect2.c
index e73fafd..d16bc14 100644 (file)
--- a/sound/drivers/pcm-indirect2.c
+++ b/sound/drivers/pcm-indirect2.c
@@ -47,7 +47,7 @@ void snd_pcm_indirect2_stat(struct snd_pcm_substream *substream,
        int seconds = (rec->lastbytetime - rec->firstbytetime) / HZ;
 
        snd_printk(KERN_DEBUG "STAT: mul_elapsed: %u, mul_elapsed_real: %d, "
-                  "irq_occured: %d\n",
+                  "irq_occurred: %d\n",
                   rec->mul_elapsed, rec->mul_elapsed_real, rec->irq_occured);
        snd_printk(KERN_DEBUG "STAT: min_multiple: %d (irqs/period)\n",
                   rec->min_multiple);

diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c
index 62c25e7..9520b4c 100644 (file)
--- a/sound/usb/6fire/firmware.c
+++ b/sound/usb/6fire/firmware.c
@@ -350,7 +350,7 @@ static int usb6fire_fw_check(struct usb_interface *intf, const u8 *version)
                if (!memcmp(version, known_fw_versions + i, 2))
                        return 0;
 
-       dev_err(&intf->dev, "invalid fimware version in device: %4ph. "
+       dev_err(&intf->dev, "invalid firmware version in device: %4ph. "
                        "please reconnect to power. if this failure "
                        "still happens, check your firmware installation.",
                        version);