dt-bindings: display: Add ABT Y030XX067A panel bindings

The Asia Better Technology (ABT) Y030XX067A panel is a 3.0" 320x480
24-bit IPS LCD panel. Its particularity is that it has non-square pixels
(as it is 4:3 for a resolution of 320x480), and that it requires odd
lines to be sent as RGB and even lines to be sent as GRB on its 8-bit
bus.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201101093150.8071-3-paul@crapouillou.net

diff --git a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
new file mode 100644 (file)
index 0000000..91cb4c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/abt,y030xx067a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS LCD panel
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: abt,y030xx067a
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "abt,y030xx067a";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };