"mediatek,mt7623-pcie"
"mediatek,mt7629-pcie"
- device_type: Must be "pci"
-- reg: Base addresses and lengths of the PCIe subsys and root ports.
+- reg: Base addresses and lengths of the root ports.
- reg-names: Names of the above areas to use during resource lookup.
- #address-cells: Address representation for root ports (must be 3)
- #size-cells: Size representation for root ports (must be 2)
- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
number of root ports.
-Required properties for MT2712/MT7622:
+Required properties for MT2712/MT7622/MT7629:
-interrupts: A list of interrupt outputs of the controller, must have one
entry for each PCIe port
+- interrupt-names: Must include the following entries:
+ - "pcie_irq": The interrupt that is asserted when an MSI/INTX is received
+- linux,pci-domain: PCI domain ID. Should be unique for each host controller
In addition, the device tree node must have sub-nodes describing each
PCIe port interface, having the following mandatory properties:
Examples for MT2712:
- pcie: pcie@11700000 {
+ pcie1: pcie@112ff000 {
compatible = "mediatek,mt2712-pcie";
device_type = "pci";
- reg = <0 0x11700000 0 0x1000>,
- <0 0x112ff000 0 0x1000>;
- reg-names = "port0", "port1";
+ reg = <0 0x112ff000 0 0x1000>;
+ reg-names = "port1";
+ linux,pci-domain = <1>;
#address-cells = <3>;
#size-cells = <2>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
- <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
- <&pericfg CLK_PERI_PCIE0>,
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie_irq";
+ clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
<&pericfg CLK_PERI_PCIE1>;
- clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1";
- phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
- phy-names = "pcie-phy0", "pcie-phy1";
+ clock-names = "sys_ck1", "ahb_ck1";
+ phys = <&u3port1 PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy1";
bus-range = <0x00 0xff>;
- ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+ ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>;
+ status = "disabled";
- pcie0: pcie@0,0 {
- reg = <0x0000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc0 0>,
- <0 0 0 2 &pcie_intc0 1>,
- <0 0 0 3 &pcie_intc0 2>,
- <0 0 0 4 &pcie_intc0 3>;
- pcie_intc0: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
};
+ };
- pcie1: pcie@1,0 {
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
+ pcie0: pcie@11700000 {
+ compatible = "mediatek,mt2712-pcie";
+ device_type = "pci";
+ reg = <0 0x11700000 0 0x1000>;
+ reg-names = "port0";
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie_irq";
+ clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+ <&pericfg CLK_PERI_PCIE0>;
+ clock-names = "sys_ck0", "ahb_ck0";
+ phys = <&u3port0 PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy0";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc1 0>,
- <0 0 0 2 &pcie_intc1 1>,
- <0 0 0 3 &pcie_intc1 2>,
- <0 0 0 4 &pcie_intc1 3>;
- pcie_intc1: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
};
};
Examples for MT7622:
- pcie: pcie@1a140000 {
+ pcie0: pcie@1a143000 {
compatible = "mediatek,mt7622-pcie";
device_type = "pci";
- reg = <0 0x1a140000 0 0x1000>,
- <0 0x1a143000 0 0x1000>,
- <0 0x1a145000 0 0x1000>;
- reg-names = "subsys", "port0", "port1";
+ reg = <0 0x1a143000 0 0x1000>;
+ reg-names = "port0";
+ linux,pci-domain = <0>;
#address-cells = <3>;
#size-cells = <2>;
- interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "pcie_irq";
clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
- <&pciesys CLK_PCIE_P1_MAC_EN>,
<&pciesys CLK_PCIE_P0_AHB_EN>,
- <&pciesys CLK_PCIE_P1_AHB_EN>,
<&pciesys CLK_PCIE_P0_AUX_EN>,
- <&pciesys CLK_PCIE_P1_AUX_EN>,
<&pciesys CLK_PCIE_P0_AXI_EN>,
- <&pciesys CLK_PCIE_P1_AXI_EN>,
<&pciesys CLK_PCIE_P0_OBFF_EN>,
- <&pciesys CLK_PCIE_P1_OBFF_EN>,
- <&pciesys CLK_PCIE_P0_PIPE_EN>,
- <&pciesys CLK_PCIE_P1_PIPE_EN>;
- clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
- "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
- "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
- phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
- phy-names = "pcie-phy0", "pcie-phy1";
+ <&pciesys CLK_PCIE_P0_PIPE_EN>;
+ clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
+ "axi_ck0", "obff_ck0", "pipe_ck0";
+
power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
bus-range = <0x00 0xff>;
- ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>;
+ status = "disabled";
- pcie0: pcie@0,0 {
- reg = <0x0000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc0 0>,
- <0 0 0 2 &pcie_intc0 1>,
- <0 0 0 3 &pcie_intc0 2>,
- <0 0 0 4 &pcie_intc0 3>;
- pcie_intc0: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
};
+ };
- pcie1: pcie@1,0 {
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
+ pcie1: pcie@1a145000 {
+ compatible = "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0 0x1a145000 0 0x1000>;
+ reg-names = "port1";
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "pcie_irq";
+ clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+ /* designer has connect RC1 with p0_ahb clock */
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P1_AUX_EN>,
+ <&pciesys CLK_PCIE_P1_AXI_EN>,
+ <&pciesys CLK_PCIE_P1_OBFF_EN>,
+ <&pciesys CLK_PCIE_P1_PIPE_EN>;
+ clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
+ "axi_ck1", "obff_ck1", "pipe_ck1";
+
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc1 0>,
- <0 0 0 2 &pcie_intc1 1>,
- <0 0 0 3 &pcie_intc1 2>,
- <0 0 0 4 &pcie_intc1 3>;
- pcie_intc1: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
};
};
#include <linux/irqchip/chained_irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/msi.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
#include <linux/reset.h>
#include "../pci.h"
* struct mtk_pcie - PCIe host information
* @dev: pointer to PCIe device
* @base: IO mapped register base
+ * @cfg: IO mapped register map for PCIe config
* @free_ck: free-run reference clock
* @mem: non-prefetchable memory resource
* @ports: pointer to PCIe port information
struct mtk_pcie {
struct device *dev;
void __iomem *base;
+ struct regmap *cfg;
struct clk *free_ck;
struct list_head ports;
return err;
}
- port->irq = platform_get_irq(pdev, port->slot);
+ if (of_find_property(dev->of_node, "interrupt-names", NULL))
+ port->irq = platform_get_irq_byname(pdev, "pcie_irq");
+ else
+ port->irq = platform_get_irq(pdev, port->slot);
+
if (port->irq < 0)
return port->irq;
val |= PCIE_CSR_LTSSM_EN(port->slot) |
PCIE_CSR_ASPM_L1_EN(port->slot);
writel(val, pcie->base + PCIE_SYS_CFG_V2);
+ } else if (pcie->cfg) {
+ val = PCIE_CSR_LTSSM_EN(port->slot) |
+ PCIE_CSR_ASPM_L1_EN(port->slot);
+ regmap_update_bits(pcie->cfg, PCIE_SYS_CFG_V2, val, val);
}
/* Assert all reset signals */
struct device *dev = pcie->dev;
struct platform_device *pdev = to_platform_device(dev);
struct resource *regs;
+ struct device_node *cfg_node;
int err;
/* get shared registers, which are optional */
return PTR_ERR(pcie->base);
}
+ cfg_node = of_find_compatible_node(NULL, NULL,
+ "mediatek,generic-pciecfg");
+ if (cfg_node) {
+ pcie->cfg = syscon_node_to_regmap(cfg_node);
+ if (IS_ERR(pcie->cfg))
+ return PTR_ERR(pcie->cfg);
+ }
+
pcie->free_ck = devm_clk_get(dev, "free_ck");
if (IS_ERR(pcie->free_ck)) {
if (PTR_ERR(pcie->free_ck) == -EPROBE_DEFER)
struct device *dev = pcie->dev;
struct device_node *node = dev->of_node, *child;
struct mtk_pcie_port *port, *tmp;
- int err;
+ int err, slot;
+
+ slot = of_get_pci_domain_nr(dev->of_node);
+ if (slot < 0) {
+ for_each_available_child_of_node(node, child) {
+ err = of_pci_get_devfn(child);
+ if (err < 0) {
+ dev_err(dev, "failed to get devfn: %d\n", err);
+ goto error_put_node;
+ }
- for_each_available_child_of_node(node, child) {
- int slot;
+ slot = PCI_SLOT(err);
- err = of_pci_get_devfn(child);
- if (err < 0) {
- dev_err(dev, "failed to parse devfn: %d\n", err);
- goto error_put_node;
+ err = mtk_pcie_parse_port(pcie, child, slot);
+ if (err)
+ goto error_put_node;
}
-
- slot = PCI_SLOT(err);
-
- err = mtk_pcie_parse_port(pcie, child, slot);
+ } else {
+ err = mtk_pcie_parse_port(pcie, node, slot);
if (err)
- goto error_put_node;
+ return err;
}
err = mtk_pcie_subsys_powerup(pcie);
projects / linux-2.6-microblaze.git / commitdiff