ARM: dts: am335x-osd3358-sm-red: switch to new cpsw switch drv

The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.

So, switch Octavo Systems OSD3358-SM-RED to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index 5403e47..605b2a4 100644 (file)
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -391,24 +391,27 @@
        clock-frequency = <100000>;
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
        phy-handle = <&ethphy0>;
        phy-mode = "rgmii-txid";
+       ti,dual-emac-pvid = <1>;
 };
 
-&mac {
-       slaves = <1>;
+&cpsw_port2 {
+       status = "disabled";
+};
+
+&mac_sw {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&cpsw_default>;
        pinctrl-1 = <&cpsw_sleep>;
        status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&davinci_mdio_default>;
        pinctrl-1 = <&davinci_mdio_sleep>;
-       status = "okay";
 
        ethphy0: ethernet-phy@4 {
                reg = <4>;