ARM: dts: ux500: Remove ux500_ prefix from ux500_serial* labels

ux500_serial{0,1,2} are the only labels with ux500_ prefix in
ste-dbx5x0.dtsi, the other labels (gpio0, msp, ...) do not use
any prefix. Remove it for consistency.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191125170428.76069-4-stephan@gerhold.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 9a840a2..d635fd8 100644 (file)
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -25,9 +25,9 @@
                spi1 = &spi1;
                spi2 = &spi2;
                spi3 = &spi3;
-               serial0 = &ux500_serial0;
-               serial1 = &ux500_serial1;
-               serial2 = &ux500_serial2;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               serial2 = &serial2;
        };
 
        chosen {
@@ -843,7 +843,7 @@
                        status = "disabled";
                };
 
-               ux500_serial0: uart@80120000 {
+               serial0: uart@80120000 {
                        compatible = "arm,pl011", "arm,primecell";
                        reg = <0x80120000 0x1000>;
                        interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -858,7 +858,7 @@
                        status = "disabled";
                };
 
-               ux500_serial1: uart@80121000 {
+               serial1: uart@80121000 {
                        compatible = "arm,pl011", "arm,primecell";
                        reg = <0x80121000 0x1000>;
                        interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -873,7 +873,7 @@
                        status = "disabled";
                };
 
-               ux500_serial2: uart@80007000 {
+               serial2: uart@80007000 {
                        compatible = "arm,pl011", "arm,primecell";
                        reg = <0x80007000 0x1000>;
                        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;