Description:
(RO) The battery discharge current capability obtained from battery fuel gauge in
milli Amps.
+
+What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_low_clock
+Date: November, 2020
+KernelVersion: v5.10
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
+ when FIVR clock is 19.2MHz or 24MHz.
+
+What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_high_clock
+Date: November, 2020
+KernelVersion: v5.10
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
+ when FIVR clock is 38.4MHz.
ACPI PMIC DRIVERS
M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
M: Len Brown <lenb@kernel.org>
-R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+R: Andy Shevchenko <andy@kernel.org>
R: Mika Westerberg <mika.westerberg@linux.intel.com>
L: linux-acpi@vger.kernel.org
S: Supported
F: drivers/gpio/gpio-msic.c
INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
-R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+M: Andy Shevchenko <andy@kernel.org>
S: Maintained
F: drivers/mfd/intel_msic.c
F: drivers/mfd/intel_soc_pmic*
config ACPI_ADXL
bool
-menuconfig PMIC_OPREGION
- bool "PMIC (Power Management Integrated Circuit) operation region support"
- help
- Select this option to enable support for ACPI operation
- region of the PMIC chip. The operation region can be used
- to control power rails and sensor reading/writing on the
- PMIC chip.
-
-if PMIC_OPREGION
-config BYTCRC_PMIC_OPREGION
- bool "ACPI operation region support for Bay Trail Crystal Cove PMIC"
- depends on INTEL_SOC_PMIC
- help
- This config adds ACPI operation region support for the Bay Trail
- version of the Crystal Cove PMIC.
-
-config CHTCRC_PMIC_OPREGION
- bool "ACPI operation region support for Cherry Trail Crystal Cove PMIC"
- depends on INTEL_SOC_PMIC
- help
- This config adds ACPI operation region support for the Cherry Trail
- version of the Crystal Cove PMIC.
-
-config XPOWER_PMIC_OPREGION
- bool "ACPI operation region support for XPower AXP288 PMIC"
- depends on MFD_AXP20X_I2C && IOSF_MBI=y
- help
- This config adds ACPI operation region support for XPower AXP288 PMIC.
-
-config BXT_WC_PMIC_OPREGION
- bool "ACPI operation region support for BXT WhiskeyCove PMIC"
- depends on INTEL_SOC_PMIC_BXTWC
- help
- This config adds ACPI operation region support for BXT WhiskeyCove PMIC.
-
-config CHT_WC_PMIC_OPREGION
- bool "ACPI operation region support for CHT Whiskey Cove PMIC"
- depends on INTEL_SOC_PMIC_CHTWC
- help
- This config adds ACPI operation region support for CHT Whiskey Cove PMIC.
-
-config CHT_DC_TI_PMIC_OPREGION
- bool "ACPI operation region support for Dollar Cove TI PMIC"
- depends on INTEL_SOC_PMIC_CHTDC_TI
- help
- This config adds ACPI operation region support for Dollar Cove TI PMIC.
-
-endif
-
config ACPI_CONFIGFS
tristate "ACPI configfs support"
select CONFIGFS_FS
bool
endif
-config TPS68470_PMIC_OPREGION
- bool "ACPI operation region support for TPS68470 PMIC"
- depends on MFD_TPS68470
- help
- This config adds ACPI operation region support for TI TPS68470 PMIC.
- TPS68470 device is an advanced power management unit that powers
- a Compact Camera Module (CCM), generates clocks for image sensors,
- drives a dual LED for flash and incorporates two LED drivers for
- general purpose indicators.
- This driver enables ACPI operation region support control voltage
- regulators and clocks.
-
- This option is a bool as it provides an ACPI operation
- region, which must be available before any of the devices
- using this, are probed.
+source "drivers/acpi/pmic/Kconfig"
endif # ACPI
obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o
-obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o
-obj-$(CONFIG_BYTCRC_PMIC_OPREGION) += pmic/intel_pmic_bytcrc.o
-obj-$(CONFIG_CHTCRC_PMIC_OPREGION) += pmic/intel_pmic_chtcrc.o
-obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
-obj-$(CONFIG_BXT_WC_PMIC_OPREGION) += pmic/intel_pmic_bxtwc.o
-obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += pmic/intel_pmic_chtwc.o
-obj-$(CONFIG_CHT_DC_TI_PMIC_OPREGION) += pmic/intel_pmic_chtdc_ti.o
-
obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o
-obj-$(CONFIG_TPS68470_PMIC_OPREGION) += pmic/tps68470_pmic.o
+obj-y += pmic/
video-objs += acpi_video.o video_detect.o
obj-y += dptf/
* Wu, Jeff <Jeff.Wu@amd.com>
*/
-#include <linux/clk-provider.h>
-#include <linux/platform_data/clk-fch.h>
-#include <linux/platform_device.h>
-#include <linux/pm_domain.h>
-#include <linux/clkdev.h>
#include <linux/acpi.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/pm.h>
+#include <linux/platform_data/clk-fch.h>
+#include <linux/platform_device.h>
#include "internal.h"
-ACPI_MODULE_NAME("acpi_apd");
struct apd_private_data;
-/**
- * ACPI_APD_SYSFS : add device attributes in sysfs
- * ACPI_APD_PM : attach power domain to device
- */
-#define ACPI_APD_SYSFS BIT(0)
-#define ACPI_APD_PM BIT(1)
-
/**
* struct apd_device_desc - a descriptor for apd device
- * @flags: device flags like %ACPI_APD_SYSFS, %ACPI_APD_PM
* @fixed_clk_rate: fixed rate input clock source for acpi device;
* 0 means no fixed rate input clock source
+ * @properties: build-in properties of the device such as UART
* @setup: a hook routine to set device resource during create platform device
*
* Device description defined as acpi_device_id.driver_data
*/
struct apd_device_desc {
- unsigned int flags;
unsigned int fixed_clk_rate;
struct property_entry *properties;
int (*setup)(struct apd_private_data *pdata);
}
#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
-
static int misc_check_res(struct acpi_resource *ares, void *data)
{
struct resource res;
static const struct apd_device_desc fch_misc_desc = {
.setup = fch_misc_setup,
};
-#endif
+#endif /* CONFIG_X86_AMD_PLATFORM_DEVICE */
#ifdef CONFIG_ARM64
static const struct apd_device_desc xgene_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 250000000,
};
-#endif
+#endif /* CONFIG_ARM64 */
-#else
-
-#define APD_ADDR(desc) (0UL)
-
-#endif /* CONFIG_X86_AMD_PLATFORM_DEVICE */
+#endif
/**
* Create platform device during acpi scan attach handle.
To compile this driver as a module, choose M here:
the module will be called dptf_power.
+
+config DPTF_PCH_FIVR
+ tristate "DPTF PCH FIVR Participant"
+ depends on X86
+ help
+ This driver adds support for Dynamic Platform and Thermal Framework
+ (DPTF) PCH FIVR Participant device support. This driver allows to
+ switch PCH FIVR (Fully Integrated Voltage Regulator) frequency.
+ This participant is responsible for exposing:
+ freq_mhz_low_clock
+ freq_mhz_high_clock
+
+ To compile this driver as a module, choose M here:
+ the module will be called dptf_pch_fivr.
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_ACPI) += int340x_thermal.o
obj-$(CONFIG_DPTF_POWER) += dptf_power.o
+obj-$(CONFIG_DPTF_PCH_FIVR) += dptf_pch_fivr.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * dptf_pch_fivr: DPTF PCH FIVR Participant driver
+ * Copyright (c) 2020, Intel Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+/*
+ * Presentation of attributes which are defined for INT1045
+ * They are:
+ * freq_mhz_low_clock : Set PCH FIVR switching freq for
+ * FIVR clock 19.2MHz and 24MHz
+ * freq_mhz_high_clock : Set PCH FIVR switching freq for
+ * FIVR clock 38.4MHz
+ */
+#define PCH_FIVR_SHOW(name, method) \
+static ssize_t name##_show(struct device *dev,\
+ struct device_attribute *attr,\
+ char *buf)\
+{\
+ struct acpi_device *acpi_dev = dev_get_drvdata(dev);\
+ unsigned long long val;\
+ acpi_status status;\
+\
+ status = acpi_evaluate_integer(acpi_dev->handle, #method,\
+ NULL, &val);\
+ if (ACPI_SUCCESS(status))\
+ return sprintf(buf, "%d\n", (int)val);\
+ else\
+ return -EINVAL;\
+}
+
+#define PCH_FIVR_STORE(name, method) \
+static ssize_t name##_store(struct device *dev,\
+ struct device_attribute *attr,\
+ const char *buf, size_t count)\
+{\
+ struct acpi_device *acpi_dev = dev_get_drvdata(dev);\
+ acpi_status status;\
+ u32 val;\
+\
+ if (kstrtouint(buf, 0, &val) < 0)\
+ return -EINVAL;\
+\
+ status = acpi_execute_simple_method(acpi_dev->handle, #method, val);\
+ if (ACPI_SUCCESS(status))\
+ return count;\
+\
+ return -EINVAL;\
+}
+
+PCH_FIVR_SHOW(freq_mhz_low_clock, GFC0)
+PCH_FIVR_SHOW(freq_mhz_high_clock, GFC1)
+PCH_FIVR_STORE(freq_mhz_low_clock, RFC0)
+PCH_FIVR_STORE(freq_mhz_high_clock, RFC1)
+
+static DEVICE_ATTR_RW(freq_mhz_low_clock);
+static DEVICE_ATTR_RW(freq_mhz_high_clock);
+
+static struct attribute *fivr_attrs[] = {
+ &dev_attr_freq_mhz_low_clock.attr,
+ &dev_attr_freq_mhz_high_clock.attr,
+ NULL
+};
+
+static const struct attribute_group pch_fivr_attribute_group = {
+ .attrs = fivr_attrs,
+ .name = "pch_fivr_switch_frequency"
+};
+
+static int pch_fivr_add(struct platform_device *pdev)
+{
+ struct acpi_device *acpi_dev;
+ unsigned long long ptype;
+ acpi_status status;
+ int result;
+
+ acpi_dev = ACPI_COMPANION(&(pdev->dev));
+ if (!acpi_dev)
+ return -ENODEV;
+
+ status = acpi_evaluate_integer(acpi_dev->handle, "PTYP", NULL, &ptype);
+ if (ACPI_FAILURE(status) || ptype != 0x05)
+ return -ENODEV;
+
+ result = sysfs_create_group(&pdev->dev.kobj,
+ &pch_fivr_attribute_group);
+ if (result)
+ return result;
+
+ platform_set_drvdata(pdev, acpi_dev);
+
+ return 0;
+}
+
+static int pch_fivr_remove(struct platform_device *pdev)
+{
+ sysfs_remove_group(&pdev->dev.kobj, &pch_fivr_attribute_group);
+
+ return 0;
+}
+
+static const struct acpi_device_id pch_fivr_device_ids[] = {
+ {"INTC1045", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, pch_fivr_device_ids);
+
+static struct platform_driver pch_fivr_driver = {
+ .probe = pch_fivr_add,
+ .remove = pch_fivr_remove,
+ .driver = {
+ .name = "DPTF PCH FIVR",
+ .acpi_match_table = pch_fivr_device_ids,
+ },
+};
+
+module_platform_driver(pch_fivr_driver);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ACPI DPTF PCH FIVR driver");
{"INTC1040"},
{"INTC1043"},
{"INTC1044"},
+ {"INTC1045"},
{"INTC1047"},
{""},
};
static umode_t nfit_visible(struct kobject *kobj, struct attribute *a, int n)
{
- struct device *dev = container_of(kobj, struct device, kobj);
+ struct device *dev = kobj_to_dev(kobj);
struct nvdimm_bus *nvdimm_bus = to_nvdimm_bus(dev);
if (a == &dev_attr_scrub.attr)
static umode_t acpi_nfit_dimm_attr_visible(struct kobject *kobj,
struct attribute *a, int n)
{
- struct device *dev = container_of(kobj, struct device, kobj);
+ struct device *dev = kobj_to_dev(kobj);
struct nvdimm *nvdimm = to_nvdimm(dev);
struct nfit_mem *nfit_mem = nvdimm_provider_data(nvdimm);
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+
+menuconfig PMIC_OPREGION
+ bool "PMIC (Power Management Integrated Circuit) operation region support"
+ help
+ Select this option to enable support for ACPI operation
+ region of the PMIC chip. The operation region can be used
+ to control power rails and sensor reading/writing on the
+ PMIC chip.
+
+if PMIC_OPREGION
+
+config BYTCRC_PMIC_OPREGION
+ bool "ACPI operation region support for Bay Trail Crystal Cove PMIC"
+ depends on INTEL_SOC_PMIC
+ help
+ This config adds ACPI operation region support for the Bay Trail
+ version of the Crystal Cove PMIC.
+
+config CHTCRC_PMIC_OPREGION
+ bool "ACPI operation region support for Cherry Trail Crystal Cove PMIC"
+ depends on INTEL_SOC_PMIC
+ help
+ This config adds ACPI operation region support for the Cherry Trail
+ version of the Crystal Cove PMIC.
+
+config XPOWER_PMIC_OPREGION
+ bool "ACPI operation region support for XPower AXP288 PMIC"
+ depends on MFD_AXP20X_I2C && IOSF_MBI=y
+ help
+ This config adds ACPI operation region support for XPower AXP288 PMIC.
+
+config BXT_WC_PMIC_OPREGION
+ bool "ACPI operation region support for BXT WhiskeyCove PMIC"
+ depends on INTEL_SOC_PMIC_BXTWC
+ help
+ This config adds ACPI operation region support for BXT WhiskeyCove PMIC.
+
+config CHT_WC_PMIC_OPREGION
+ bool "ACPI operation region support for CHT Whiskey Cove PMIC"
+ depends on INTEL_SOC_PMIC_CHTWC
+ help
+ This config adds ACPI operation region support for CHT Whiskey Cove PMIC.
+
+config CHT_DC_TI_PMIC_OPREGION
+ bool "ACPI operation region support for Dollar Cove TI PMIC"
+ depends on INTEL_SOC_PMIC_CHTDC_TI
+ help
+ This config adds ACPI operation region support for Dollar Cove TI PMIC.
+
+endif # PMIC_OPREGION
+
+config TPS68470_PMIC_OPREGION
+ bool "ACPI operation region support for TPS68470 PMIC"
+ depends on MFD_TPS68470
+ help
+ This config adds ACPI operation region support for TI TPS68470 PMIC.
+ TPS68470 device is an advanced power management unit that powers
+ a Compact Camera Module (CCM), generates clocks for image sensors,
+ drives a dual LED for flash and incorporates two LED drivers for
+ general purpose indicators.
+ This driver enables ACPI operation region support control voltage
+ regulators and clocks.
+
+ This option is a bool as it provides an ACPI operation
+ region, which must be available before any of the devices
+ using this, are probed.
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_PMIC_OPREGION) += intel_pmic.o
+obj-$(CONFIG_BYTCRC_PMIC_OPREGION) += intel_pmic_bytcrc.o
+obj-$(CONFIG_CHTCRC_PMIC_OPREGION) += intel_pmic_chtcrc.o
+obj-$(CONFIG_XPOWER_PMIC_OPREGION) += intel_pmic_xpower.o
+obj-$(CONFIG_BXT_WC_PMIC_OPREGION) += intel_pmic_bxtwc.o
+obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += intel_pmic_chtwc.o
+obj-$(CONFIG_CHT_DC_TI_PMIC_OPREGION) += intel_pmic_chtdc_ti.o
+obj-$(CONFIG_TPS68470_PMIC_OPREGION) += tps68470_pmic.o
projects / linux-2.6-microblaze.git / commitdiff