mips: boot: clean up self-extracting targets scenarios

1. All final targets like vmlinuz.{bin,ecoff,srec} etc. should reside in
   $(objtree)/arch/mips/boot, not in the root $(objtree) directory.
   The only file that should be left there is vmlinuz, similar to other
   architectures.
2. Add all the targets to $(targets) variable, so they'll be properly
   accounted by Kbuild. This also allows to remove redundant
   $(clean-files) (which were missing uzImage BTW).
3. Prefix all targets with $(obj)/$(objtree), depending on their
   locations.

Misc: fix the identation of the 'STRIP' quiet message.

Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 0d0f29d..622ee83 100644 (file)
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -378,7 +378,7 @@ ifdef CONFIG_SYS_SUPPORTS_ZBOOT
 # boot/compressed
 $(bootz-y): $(vmlinux-32) FORCE
        $(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
-               $(bootvars-y) 32bit-bfd=$(32bit-bfd) $@
+               $(bootvars-y) 32bit-bfd=$(32bit-bfd) arch/mips/boot/$@
 else
 vmlinuz: FORCE
        @echo '   CONFIG_SYS_SUPPORTS_ZBOOT is not enabled'

diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore
index 2adc858..1c7addd 100644 (file)
--- a/arch/mips/boot/.gitignore
+++ b/arch/mips/boot/.gitignore
@@ -2,6 +2,7 @@
 mkboot
 elf2ecoff
 vmlinux.*
+vmlinuz.*
 zImage
 zImage.tmp
 calc_vmlinuz_load_addr

diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index d665118..fa2c1e1 100644 (file)
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -65,7 +65,9 @@ $(obj)/bswapsi.c: $(obj)/%.c: $(srctree)/arch/mips/lib/%.c FORCE
 targets := $(notdir $(vmlinuzobjs-y))
 
 targets += vmlinux.bin
+
 OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
+
 $(obj)/vmlinux.bin: $(KBUILD_IMAGE) FORCE
        $(call if_changed,objcopy)
 
@@ -78,12 +80,15 @@ tool_$(CONFIG_KERNEL_XZ)      = xzkern
 tool_$(CONFIG_KERNEL_ZSTD)    = zstd22
 
 targets += vmlinux.bin.z
+
 $(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE
        $(call if_changed,$(tool_y))
 
 targets += piggy.o dummy.o
+
 OBJCOPYFLAGS_piggy.o := --add-section=.image=$(obj)/vmlinux.bin.z \
                        --set-section-flags=.image=contents,alloc,load,readonly,data
+
 $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
        $(call if_changed,objcopy)
 
@@ -102,14 +107,21 @@ UIMAGE_LOADADDR = $(VMLINUZ_LOAD_ADDRESS)
 
 vmlinuzobjs-y += $(obj)/piggy.o
 
+targets += ../../../../vmlinuz
+
 quiet_cmd_zld = LD      $@
       cmd_zld = $(LD) $(KBUILD_LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T $< $(vmlinuzobjs-y) -o $@
-quiet_cmd_strip = STRIP          $@
+quiet_cmd_strip = STRIP   $@
       cmd_strip = $(STRIP) -s $@
-vmlinuz: $(src)/ld.script $(vmlinuzobjs-y) $(obj)/calc_vmlinuz_load_addr
+
+$(objtree)/vmlinuz: $(src)/ld.script $(vmlinuzobjs-y) $(obj)/calc_vmlinuz_load_addr
        $(call cmd,zld)
        $(call cmd,strip)
 
+objboot := $(objtree)/arch/mips/boot
+
+$(objboot)/vmlinuz: $(objtree)/vmlinuz FORCE
+
 #
 # Some DECstations need all possible sections of an ECOFF executable
 #
@@ -121,34 +133,42 @@ endif
 hostprogs += ../elf2ecoff
 
 ifdef CONFIG_32BIT
-       VMLINUZ = vmlinuz
+       VMLINUZ = $(objtree)/vmlinuz
 else
-       VMLINUZ = vmlinuz.32
+       VMLINUZ = $(objboot)/vmlinuz.32
 endif
 
+targets += ../vmlinuz.32
+
 quiet_cmd_32 = OBJCOPY $@
       cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
-vmlinuz.32: vmlinuz
+
+$(objboot)/vmlinuz.32: $(objtree)/vmlinuz
        $(call cmd,32)
 
+targets += ../vmlinuz.ecoff
+
 quiet_cmd_ecoff = ECOFF          $@
       cmd_ecoff = $< $(VMLINUZ) $@ $(e2eflag)
-vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ)
+
+$(objboot)/vmlinuz.ecoff: $(objboot)/elf2ecoff $(VMLINUZ)
        $(call cmd,ecoff)
 
+targets += ../vmlinuz.bin
+
 OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary
-vmlinuz.bin: vmlinuz
+
+$(objboot)/vmlinuz.bin: $(objtree)/vmlinuz
        $(call cmd,objcopy)
 
+targets += ../vmlinuz.srec
+
 OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec
-vmlinuz.srec: vmlinuz
+
+$(objboot)/vmlinuz.srec: $(objtree)/vmlinuz
        $(call cmd,objcopy)
 
-uzImage.bin: vmlinuz.bin FORCE
-       $(call if_changed,uimage,none)
+targets += ../uzImage.bin
 
-clean-files += $(objtree)/vmlinuz
-clean-files += $(objtree)/vmlinuz.32
-clean-files += $(objtree)/vmlinuz.ecoff
-clean-files += $(objtree)/vmlinuz.bin
-clean-files += $(objtree)/vmlinuz.srec
+$(objboot)/uzImage.bin: $(objboot)/vmlinuz.bin FORCE
+       $(call if_changed,uimage,none)