media: dt-bindings: media: i2c: Add IMX290 CMOS sensor binding

Add devicetree binding for IMX290 CMOS image sensor. Let's also
add MAINTAINERS entry for the binding and driver.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

diff --git a/Documentation/devicetree/bindings/media/i2c/imx290.txt b/Documentation/devicetree/bindings/media/i2c/imx290.txt
new file mode 100644 (file)
index 0000000..a3cc214
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx290.txt
@@ -0,0 +1,57 @@
+* Sony IMX290 1/2.8-Inch CMOS Image Sensor
+
+The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with
+Square Pixel for Color Cameras. It is programmable through I2C and 4-wire
+interfaces. The sensor output is available via CMOS logic parallel SDR output,
+Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the
+default. No bindings have been defined for the other busses.
+
+Required Properties:
+- compatible: Should be "sony,imx290"
+- reg: I2C bus address of the device
+- clocks: Reference to the xclk clock.
+- clock-names: Should be "xclk".
+- clock-frequency: Frequency of the xclk clock in Hz.
+- vdddo-supply: Sensor digital IO regulator.
+- vdda-supply: Sensor analog regulator.
+- vddd-supply: Sensor digital core regulator.
+
+Optional Properties:
+- reset-gpios: Sensor reset GPIO
+
+The imx290 device node should contain one 'port' child node with
+an 'endpoint' subnode. For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Required Properties on endpoint:
+- data-lanes: check ../video-interfaces.txt
+- link-frequencies: check ../video-interfaces.txt
+- remote-endpoint: check ../video-interfaces.txt
+
+Example:
+       &i2c1 {
+               ...
+               imx290: camera-sensor@1a {
+                       compatible = "sony,imx290";
+                       reg = <0x1a>;
+
+                       reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&camera_rear_default>;
+
+                       clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+                       clock-names = "xclk";
+                       clock-frequency = <37125000>;
+
+                       vdddo-supply = <&camera_vdddo_1v8>;
+                       vdda-supply = <&camera_vdda_2v8>;
+                       vddd-supply = <&camera_vddd_1v5>;
+
+                       port {
+                               imx290_ep: endpoint {
+                                       data-lanes = <1 2 3 4>;
+                                       link-frequencies = /bits/ 64 <445500000>;
+                                       remote-endpoint = <&csiphy0_ep>;
+                               };
+                       };
+               };

diff --git a/MAINTAINERS b/MAINTAINERS
index 8598f49..336c09f 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15136,6 +15136,14 @@ S:     Maintained
 F:     drivers/media/i2c/imx274.c
 F:     Documentation/devicetree/bindings/media/i2c/imx274.txt
 
+SONY IMX290 SENSOR DRIVER
+M:     Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+L:     linux-media@vger.kernel.org
+T:     git git://linuxtv.org/media_tree.git
+S:     Maintained
+F:     drivers/media/i2c/imx290.c
+F:     Documentation/devicetree/bindings/media/i2c/imx290.txt
+
 SONY IMX319 SENSOR DRIVER
 M:     Bingbu Cao <bingbu.cao@intel.com>
 L:     linux-media@vger.kernel.org