dt-bindings: iio: accel: bma255: Add interrupt-names

The binding already allows specifying both interrupt pins, but there
is currently no way to describe a board where (for whatever reason)
only INT2 is connected. Make it possible to use "interrupt-names"
to make it explicit which interrupt pin is meant in the interrupts.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210802155657.102766-2-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
index 5b35856..253b205 100644 (file)
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -45,9 +45,18 @@ properties:
     minItems: 1
     maxItems: 2
     description: |
-      The first interrupt listed must be the one connected to the INT1 pin,
-      the second (optional) interrupt listed must be the one connected to the
-      INT2 pin (if available). The type should be IRQ_TYPE_EDGE_RISING.
+      Without interrupt-names, the first interrupt listed must be the one
+      connected to the INT1 pin, the second (optional) interrupt listed must be
+      the one connected to the INT2 pin (if available). The type should be
+      IRQ_TYPE_EDGE_RISING.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
 
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix.
@@ -73,6 +82,7 @@ examples:
             vddio-supply = <&vddio>;
             vdd-supply = <&vdd>;
             interrupts = <57 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
         };
     };
   - |