#ifndef HPSA_CMD_H
#define HPSA_CMD_H
+#include <linux/compiler.h>
+
+#include <linux/build_bug.h> /* static_assert */
+#include <linux/stddef.h> /* offsetof */
+
/* general boundary defintions */
#define SENSEINFOBYTES 32 /* may vary between hbas */
#define SG_ENTRIES_IN_CMD 32 /* Max SG entries excluding chain blocks */
MAX_EXT_TARGETS + 1) /* + 1 is for the controller itself */
/* SCSI-3 Commands */
-#pragma pack(1)
-
#define HPSA_INQUIRY 0x12
struct InquiryData {
u8 data_byte[36];
-};
+} __packed;
#define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */
#define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */
u8 xor_mult[2]; /**< XOR multipliers for this position,
* valid for data disks only */
u8 reserved[2];
-};
+} __packed;
struct raid_map_data {
__le32 structure_size; /* Size of entire structure in bytes */
__le16 dekindex; /* Data encryption key index. */
u8 reserved[16];
struct raid_map_disk_data data[RAID_MAP_MAX_ENTRIES];
-};
+} __packed;
struct ReportLUNdata {
u8 LUNListLength[4];
u8 extended_response_flag;
u8 reserved[3];
u8 LUN[HPSA_MAX_LUN][8];
-};
+} __packed;
struct ext_report_lun_entry {
u8 lunid[8];
u8 lun_count; /* multi-lun device, how many luns */
u8 redundant_paths;
u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */
-};
+} __packed;
struct ReportExtendedLUNdata {
u8 LUNListLength[4];
u8 extended_response_flag;
u8 reserved[3];
struct ext_report_lun_entry LUN[HPSA_MAX_PHYS_LUN];
-};
+} __packed;
struct SenseSubsystem_info {
u8 reserved[36];
u8 portname[8];
u8 reserved1[1108];
-};
+} __packed;
/* BMIC commands */
#define BMIC_READ 0x26
u8 Targ:6;
u8 Mode:2; /* b10 */
} LogUnit;
-};
+} __packed;
struct PhysDevAddr {
u32 TargetId:24;
u32 Mode:2;
/* 2 level target device addr */
union SCSI3Addr Target[2];
-};
+} __packed;
struct LogDevAddr {
u32 VolId:30;
u32 Mode:2;
u8 reserved[4];
-};
+} __packed;
union LUNAddr {
u8 LunAddrBytes[8];
union SCSI3Addr SCSI3Lun[4];
struct PhysDevAddr PhysDev;
struct LogDevAddr LogDev;
-};
+} __packed;
struct CommandListHeader {
u8 ReplyQueue;
__le16 SGTotal;
__le64 tag;
union LUNAddr LUN;
-};
+} __packed;
struct RequestBlock {
u8 CDBLen;
#define GET_DIR(tad) (((tad) >> 6) & 0x03)
u16 Timeout;
u8 CDB[16];
-};
+} __packed;
struct ErrDescriptor {
__le64 Addr;
__le32 Len;
-};
+} __packed;
struct SGDescriptor {
__le64 Addr;
__le32 Len;
__le32 Ext;
-};
+} __packed;
union MoreErrInfo {
struct {
u8 offense_num; /* byte # of offense 0-base */
u32 offense_value;
} Invalid_Cmd;
-};
+} __packed;
+
struct ErrorInfo {
u8 ScsiStatus;
u8 SenseLen;
u32 ResidualCnt;
union MoreErrInfo MoreErrInfo;
u8 SenseInfo[SENSEINFOBYTES];
-};
+} __packed;
/* Command types */
#define CMD_IOCTL_PEND 0x01
#define CMD_SCSI 0x03
atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */
} __aligned(COMMANDLIST_ALIGNMENT);
+/*
+ * Make sure our embedded atomic variable is aligned. Otherwise we break atomic
+ * operations on architectures that don't support unaligned atomics like IA64.
+ *
+ * The assert guards against reintroductin against unwanted __packed to
+ * the struct CommandList.
+ */
+static_assert(offsetof(struct CommandList, refcount) % __alignof__(atomic_t) == 0);
+
/* Max S/G elements in I/O accelerator command */
#define IOACCEL1_MAXSGENTRIES 24
#define IOACCEL2_MAXSGENTRIES 28
__le64 host_addr; /* 0x70 - 0x77 */
u8 CISS_LUN[8]; /* 0x78 - 0x7F */
struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES];
-} __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT);
+} __packed __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT);
#define IOACCEL1_FUNCTION_SCSIIO 0x00
#define IOACCEL1_SGLOFFSET 32
u8 chain_indicator;
#define IOACCEL2_CHAIN 0x80
#define IOACCEL2_LAST_SG 0x40
-};
+} __packed;
/*
* SCSI Response Format structure for IO Accelerator Mode 2
u8 sense_data_len; /* sense/response data length */
u8 resid_cnt[4]; /* residual count */
u8 sense_data_buff[32]; /* sense/response data buffer */
-};
+} __packed;
/*
* Structure for I/O accelerator (mode 2 or m2) commands.
__le32 tweak_upper; /* Encryption tweak, upper 4 bytes */
struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES];
struct io_accel2_scsi_response error_data;
-} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
+} __packed __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
/*
* defines for Mode 2 command struct
__le64 abort_tag; /* cciss tag of SCSI cmd or TMF to abort */
__le64 error_ptr; /* Error Pointer */
__le32 error_len; /* Error Length */
-} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
+} __packed __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
/* Configuration Table Structure */
struct HostWrite {
__le32 command_pool_addr_hi;
__le32 CoalIntDelay;
__le32 CoalIntCount;
-};
+} __packed;
#define SIMPLE_MODE 0x02
#define PERFORMANT_MODE 0x04
#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30)
#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31)
__le32 clear_event_notify;
-};
+} __packed;
#define NUM_BLOCKFETCH_ENTRIES 8
struct TransTable_struct {
__le32 RepQCtrAddrHigh32;
#define MAX_REPLY_QUEUES 64
struct vals32 RepQAddr[MAX_REPLY_QUEUES];
-};
+} __packed;
struct hpsa_pci_info {
unsigned char bus;
unsigned char dev_fn;
unsigned short domain;
u32 board_id;
-};
+} __packed;
struct bmic_identify_controller {
u8 configured_logical_drive_count; /* offset 0 */
u8 pad2[136];
u8 controller_mode; /* offset 292 */
u8 pad3[32];
-};
+} __packed;
struct bmic_identify_physical_device {
u8 max_link_rate[256];
u8 neg_phys_link_rate[256];
u8 box_conn_name[8];
-} __attribute((aligned(512)));
+} __packed __attribute((aligned(512)));
struct bmic_sense_subsystem_info {
u8 primary_slot_number;
u8 secondary_array_serial_number[32];
u8 secondary_cache_serial_number[32];
u8 pad[332];
-};
+} __packed;
struct bmic_sense_storage_box_params {
u8 reserved[36];
u8 reserver_3[84];
u8 phys_connector[2];
u8 reserved_4[296];
-};
+} __packed;
-#pragma pack()
#endif /* HPSA_CMD_H */
PM8001_EVENT_LOG_SIZE;
pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_option = 0x01;
pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_interrupt = 0x01;
- for (i = 0; i < PM8001_MAX_INB_NUM; i++) {
+ for (i = 0; i < pm8001_ha->max_q_num; i++) {
pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt =
PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30);
pm8001_ha->inbnd_q_tbl[i].upper_base_addr =
pm8001_ha->inbnd_q_tbl[i].producer_idx = 0;
pm8001_ha->inbnd_q_tbl[i].consumer_index = 0;
}
- for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) {
+ for (i = 0; i < pm8001_ha->max_q_num; i++) {
pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30);
pm8001_ha->outbnd_q_tbl[i].upper_base_addr =
read_outbnd_queue_table(pm8001_ha);
/* update main config table ,inbound table and outbound table */
update_main_config_table(pm8001_ha);
- for (i = 0; i < PM8001_MAX_INB_NUM; i++)
+ for (i = 0; i < pm8001_ha->max_q_num; i++)
update_inbnd_queue_table(pm8001_ha, i);
- for (i = 0; i < PM8001_MAX_OUTB_NUM; i++)
+ for (i = 0; i < pm8001_ha->max_q_num; i++)
update_outbnd_queue_table(pm8001_ha, i);
/* 8081 controller donot require these operations */
if (deviceid != 0x8081 && deviceid != 0x0042) {
res = mutex_lock_interruptible(&rport->mutex);
if (res)
goto out;
- if (rport->state != SRP_RPORT_FAIL_FAST)
+ if (rport->state != SRP_RPORT_FAIL_FAST && rport->state != SRP_RPORT_LOST)
/*
* sdev state must be SDEV_TRANSPORT_OFFLINE, transition
* to SDEV_BLOCK is illegal. Calling scsi_target_unblock()
DECLARE_COMPLETION_ONSTACK(wait);
struct request *req;
unsigned long flags;
- int free_slot, task_tag, err;
+ int task_tag, err;
/*
- * Get free slot, sleep if slots are unavailable.
- * Even though we use wait_event() which sleeps indefinitely,
- * the maximum wait time is bounded by %TM_CMD_TIMEOUT.
+ * blk_get_request() is used here only to get a free tag.
*/
req = blk_get_request(q, REQ_OP_DRV_OUT, 0);
if (IS_ERR(req))
return PTR_ERR(req);
req->end_io_data = &wait;
- free_slot = req->tag;
- WARN_ON_ONCE(free_slot < 0 || free_slot >= hba->nutmrs);
ufshcd_hold(hba, false);
spin_lock_irqsave(host->host_lock, flags);
- task_tag = hba->nutrs + free_slot;
+ blk_mq_start_request(req);
+ task_tag = req->tag;
treq->upiu_req.req_header.dword_0 |= cpu_to_be32(task_tag);
- memcpy(hba->utmrdl_base_addr + free_slot, treq, sizeof(*treq));
- ufshcd_vops_setup_task_mgmt(hba, free_slot, tm_function);
+ memcpy(hba->utmrdl_base_addr + task_tag, treq, sizeof(*treq));
+ ufshcd_vops_setup_task_mgmt(hba, task_tag, tm_function);
/* send command to the controller */
- __set_bit(free_slot, &hba->outstanding_tasks);
+ __set_bit(task_tag, &hba->outstanding_tasks);
/* Make sure descriptors are ready before ringing the task doorbell */
wmb();
- ufshcd_writel(hba, 1 << free_slot, REG_UTP_TASK_REQ_DOOR_BELL);
+ ufshcd_writel(hba, 1 << task_tag, REG_UTP_TASK_REQ_DOOR_BELL);
/* Make sure that doorbell is committed immediately */
wmb();
ufshcd_add_tm_upiu_trace(hba, task_tag, UFS_TM_ERR);
dev_err(hba->dev, "%s: task management cmd 0x%.2x timed-out\n",
__func__, tm_function);
- if (ufshcd_clear_tm_cmd(hba, free_slot))
- dev_WARN(hba->dev, "%s: unable clear tm cmd (slot %d) after timeout\n",
- __func__, free_slot);
+ if (ufshcd_clear_tm_cmd(hba, task_tag))
+ dev_WARN(hba->dev, "%s: unable to clear tm cmd (slot %d) after timeout\n",
+ __func__, task_tag);
err = -ETIMEDOUT;
} else {
err = 0;
- memcpy(treq, hba->utmrdl_base_addr + free_slot, sizeof(*treq));
+ memcpy(treq, hba->utmrdl_base_addr + task_tag, sizeof(*treq));
ufshcd_add_tm_upiu_trace(hba, task_tag, UFS_TM_COMP);
}
spin_lock_irqsave(hba->host->host_lock, flags);
- __clear_bit(free_slot, &hba->outstanding_tasks);
+ __clear_bit(task_tag, &hba->outstanding_tasks);
spin_unlock_irqrestore(hba->host->host_lock, flags);
+ ufshcd_release(hba);
blk_put_request(req);
- ufshcd_release(hba);
return err;
}
target_get_sess_cmd(&cmd->se_cmd, true);
+ cmd->se_cmd.tag = (__force u32)cmd->init_task_tag;
cmd->sense_reason = target_cmd_init_cdb(&cmd->se_cmd, hdr->cdb,
GFP_KERNEL);
+
if (cmd->sense_reason) {
if (cmd->sense_reason == TCM_OUT_OF_RESOURCES) {
return iscsit_add_reject_cmd(cmd,
if (cmd->sense_reason)
goto attach_cmd;
- /* only used for printks or comparing with ->ref_task_tag */
- cmd->se_cmd.tag = (__force u32)cmd->init_task_tag;
cmd->sense_reason = target_cmd_parse_cdb(&cmd->se_cmd);
if (cmd->sense_reason)
goto attach_cmd;
projects / linux-2.6-microblaze.git / commitdiff