ACPI: DPTF: Add new PCH FIVR methods

Some additional information is required for updating PCH FIVR values
upon WiFi channel changes.

New attributes added to the existing sysfs:

fivr_switching_freq_mhz	: Get the FIVR switching control frequency.
			  Uses ACPI method GFCS.

fivr_switching_fault_status: Read the FIVR switching frequency control
			     fault status. Uses ACPI method GFFS.

ssc_clock_info : Presents SSC (spread spectrum clock) information for
		 EMI (Electro magnetic interference) control. Use ACPI
		 method GEMI (refer to the description of GEMI method
		 below).

GFFS
This ACPI method is used to read the FIVR switching frequency control
fault status.
Bits	Description
[0:0]	Fault status when set to 1
[31:1]	Reserved

GFCS
This ACPI method is used to read the FIVR switching control frequency.
Bits	Description
[11:0]	Actual Frequency = value * XTAL_FREQ / 128
[31:12]	Reserved

GEMI
This ACPI method is used to read the programmed register value for
EMI (Electro magnetic interference) control.

Bits	Description
[7:0]	Sets clock spectrum spread percentage:
	0x00=0.2% , 0x3F=10%
	1 LSB = 0.1% increase in spread (for
	settings 0x01 thru 0x1C)
	1 LSB = 0.2% increase in spread (for
	settings 0x1E thru 0x3F)
[8]	When set to 1, enables spread
	spectrum clock
[9]	0: Triangle mode. FFC frequency
	walks around the Fcenter in a linear
	fashion
	1: Random walk mode. FFC frequency
	changes randomly within the SSC
	(Spread spectrum clock) range
[10]	0: No white noise. 1: Add white noise
	to spread waveform
[11]	When 1, future writes are ignored.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf
index 1418343..53c6b10 100644 (file)
--- a/Documentation/ABI/testing/sysfs-platform-dptf
+++ b/Documentation/ABI/testing/sysfs-platform-dptf
@@ -111,3 +111,43 @@ Contact:   linux-acpi@vger.kernel.org
 Description:
                (RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
                when FIVR clock is 38.4MHz.
+
+What:          /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_freq_mhz
+Date:          September, 2021
+KernelVersion: v5.15
+Contact:       linux-acpi@vger.kernel.org
+Description:
+               (RO) Get the FIVR switching control frequency in MHz.
+
+What:          /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_fault_status
+Date:          September, 2021
+KernelVersion: v5.15
+Contact:       linux-acpi@vger.kernel.org
+Description:
+               (RO) Read the FIVR switching frequency control fault status.
+
+What:          /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/ssc_clock_info
+Date:          September, 2021
+KernelVersion: v5.15
+Contact:       linux-acpi@vger.kernel.org
+Description:
+               (RO) Presents SSC (spread spectrum clock) information for EMI
+               (Electro magnetic interference) control. This is a bit mask.
+               Bits    Description
+               [7:0]   Sets clock spectrum spread percentage:
+                       0x00=0.2% , 0x3F=10%
+                       1 LSB = 0.1% increase in spread (for
+                       settings 0x01 thru 0x1C)
+                       1 LSB = 0.2% increase in spread (for
+                       settings 0x1E thru 0x3F)
+               [8]     When set to 1, enables spread
+                       spectrum clock
+               [9]     0: Triangle mode. FFC frequency
+                       walks around the Fcenter in a linear
+                       fashion
+                       1: Random walk mode. FFC frequency
+                       changes randomly within the SSC
+                       (Spread spectrum clock) range
+               [10]    0: No white noise. 1: Add white noise
+                       to spread waveform
+               [11]    When 1, future writes are ignored.

diff --git a/drivers/acpi/dptf/dptf_pch_fivr.c b/drivers/acpi/dptf/dptf_pch_fivr.c
index 550b908..f4e9c2e 100644 (file)
--- a/drivers/acpi/dptf/dptf_pch_fivr.c
+++ b/drivers/acpi/dptf/dptf_pch_fivr.c
@@ -90,15 +90,24 @@ static ssize_t name##_store(struct device *dev,\
 
 PCH_FIVR_SHOW(freq_mhz_low_clock, GFC0)
 PCH_FIVR_SHOW(freq_mhz_high_clock, GFC1)
+PCH_FIVR_SHOW(ssc_clock_info, GEMI)
+PCH_FIVR_SHOW(fivr_switching_freq_mhz, GFCS)
+PCH_FIVR_SHOW(fivr_switching_fault_status, GFFS)
 PCH_FIVR_STORE(freq_mhz_low_clock, RFC0)
 PCH_FIVR_STORE(freq_mhz_high_clock, RFC1)
 
 static DEVICE_ATTR_RW(freq_mhz_low_clock);
 static DEVICE_ATTR_RW(freq_mhz_high_clock);
+static DEVICE_ATTR_RO(ssc_clock_info);
+static DEVICE_ATTR_RO(fivr_switching_freq_mhz);
+static DEVICE_ATTR_RO(fivr_switching_fault_status);
 
 static struct attribute *fivr_attrs[] = {
        &dev_attr_freq_mhz_low_clock.attr,
        &dev_attr_freq_mhz_high_clock.attr,
+       &dev_attr_ssc_clock_info.attr,
+       &dev_attr_fivr_switching_freq_mhz.attr,
+       &dev_attr_fivr_switching_fault_status.attr,
        NULL
 };