0x9A0, 0x9A4, 0x9A8, 0x9AC,
};
-#define MSTPSR(i) mstpsr[i]
-
-
/*
* System Module Stop Control Register offsets
*/
0x990, 0x994, 0x998, 0x99C,
};
-#define SMSTPCR(i) smstpcr[i]
-
/*
* Standby Control Register offsets (RZ/A)
* Base address is FRQCR register
0x424, 0x428, 0x42C,
};
-#define STBCR(i) stbcr[i]
-
/*
* Software Reset Register offsets
*/
0x920, 0x924, 0x928, 0x92C,
};
-#define SRCR(i) srcr[i]
-
-
/* Realtime Module Stop Control Register offsets */
#define RMSTPCR(i) (smstpcr[i] - 0x20)
#define MMSTPCR(i) (smstpcr[i] + 0x20)
/* Software Reset Clearing Register offsets */
-#define SRSTCLR(i) (0x940 + (i) * 4)
+static const u16 srstclr[] = {
+ 0x940, 0x944, 0x948, 0x94C, 0x950, 0x954, 0x958, 0x95C,
+ 0x960, 0x964, 0x968, 0x96C,
+};
/**
* Clock Pulse Generator / Module Standby and Software Reset Private Data
* @rcdev: Optional reset controller entity
* @dev: CPG/MSSR device
* @base: CPG/MSSR register block base address
+ * @reg_layout: CPG/MSSR register layout
* @rmw_lock: protects RMW register accesses
* @np: Device node in DT for this CPG/MSSR module
* @num_core_clks: Number of Core Clocks in clks[]
* @num_mod_clks: Number of Module Clocks in clks[]
* @last_dt_core_clk: ID of the last Core Clock exported to DT
- * @stbyctrl: This device has Standby Control Registers
* @notifiers: Notifier chain to save/restore clock state for system resume
+ * @status_regs: Pointer to status registers array
+ * @control_regs: Pointer to control registers array
+ * @reset_regs: Pointer to reset registers array
+ * @reset_clear_regs: Pointer to reset clearing registers array
* @smstpcr_saved[].mask: Mask of SMSTPCR[] bits under our control
* @smstpcr_saved[].val: Saved values of SMSTPCR[]
* @clks: Array containing all Core and Module Clocks
#endif
struct device *dev;
void __iomem *base;
+ enum clk_reg_layout reg_layout;
spinlock_t rmw_lock;
struct device_node *np;
unsigned int num_core_clks;
unsigned int num_mod_clks;
unsigned int last_dt_core_clk;
- bool stbyctrl;
struct raw_notifier_head notifiers;
+ const u16 *status_regs;
+ const u16 *control_regs;
+ const u16 *reset_regs;
+ const u16 *reset_clear_regs;
struct {
u32 mask;
u32 val;
enable ? "ON" : "OFF");
spin_lock_irqsave(&priv->rmw_lock, flags);
- if (priv->stbyctrl) {
- value = readb(priv->base + STBCR(reg));
+ if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A) {
+ value = readb(priv->base + priv->control_regs[reg]);
if (enable)
value &= ~bitmask;
else
value |= bitmask;
- writeb(value, priv->base + STBCR(reg));
+ writeb(value, priv->base + priv->control_regs[reg]);
/* dummy read to ensure write has completed */
- readb(priv->base + STBCR(reg));
- barrier_data(priv->base + STBCR(reg));
+ readb(priv->base + priv->control_regs[reg]);
+ barrier_data(priv->base + priv->control_regs[reg]);
} else {
- value = readl(priv->base + SMSTPCR(reg));
+ value = readl(priv->base + priv->control_regs[reg]);
if (enable)
value &= ~bitmask;
else
value |= bitmask;
- writel(value, priv->base + SMSTPCR(reg));
+ writel(value, priv->base + priv->control_regs[reg]);
}
spin_unlock_irqrestore(&priv->rmw_lock, flags);
- if (!enable || priv->stbyctrl)
+ if (!enable || priv->reg_layout == CLK_REG_LAYOUT_RZ_A)
return 0;
for (i = 1000; i > 0; --i) {
- if (!(readl(priv->base + MSTPSR(reg)) & bitmask))
+ if (!(readl(priv->base + priv->status_regs[reg]) & bitmask))
break;
cpu_relax();
}
if (!i) {
dev_err(dev, "Failed to enable SMSTP %p[%d]\n",
- priv->base + SMSTPCR(reg), bit);
+ priv->base + priv->control_regs[reg], bit);
return -ETIMEDOUT;
}
struct cpg_mssr_priv *priv = clock->priv;
u32 value;
- if (priv->stbyctrl)
- value = readb(priv->base + STBCR(clock->index / 32));
+ if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A)
+ value = readb(priv->base + priv->control_regs[clock->index / 32]);
else
- value = readl(priv->base + MSTPSR(clock->index / 32));
+ value = readl(priv->base + priv->status_regs[clock->index / 32]);
return !(value & BIT(clock->index % 32));
}
case CPG_MOD:
type = "module";
- if (priv->stbyctrl) {
+ if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A) {
idx = MOD_CLK_PACK_10(clkidx);
range_check = 7 - (clkidx % 10);
} else {
dev_dbg(priv->dev, "reset %u%02u\n", reg, bit);
/* Reset module */
- writel(bitmask, priv->base + SRCR(reg));
+ writel(bitmask, priv->base + priv->reset_regs[reg]);
/* Wait for at least one cycle of the RCLK clock (@ ca. 32 kHz) */
udelay(35);
/* Release module from reset state */
- writel(bitmask, priv->base + SRSTCLR(reg));
+ writel(bitmask, priv->base + priv->reset_clear_regs[reg]);
return 0;
}
dev_dbg(priv->dev, "assert %u%02u\n", reg, bit);
- writel(bitmask, priv->base + SRCR(reg));
+ writel(bitmask, priv->base + priv->reset_regs[reg]);
return 0;
}
dev_dbg(priv->dev, "deassert %u%02u\n", reg, bit);
- writel(bitmask, priv->base + SRSTCLR(reg));
+ writel(bitmask, priv->base + priv->reset_clear_regs[reg]);
return 0;
}
unsigned int bit = id % 32;
u32 bitmask = BIT(bit);
- return !!(readl(priv->base + SRCR(reg)) & bitmask);
+ return !!(readl(priv->base + priv->reset_regs[reg]) & bitmask);
}
static const struct reset_control_ops cpg_mssr_reset_ops = {
/* Save module registers with bits under our control */
for (reg = 0; reg < ARRAY_SIZE(priv->smstpcr_saved); reg++) {
if (priv->smstpcr_saved[reg].mask)
- priv->smstpcr_saved[reg].val = priv->stbyctrl ?
- readb(priv->base + STBCR(reg)) :
- readl(priv->base + SMSTPCR(reg));
+ priv->smstpcr_saved[reg].val =
+ priv->reg_layout == CLK_REG_LAYOUT_RZ_A ?
+ readb(priv->base + priv->control_regs[reg]) :
+ readl(priv->base + priv->control_regs[reg]);
}
/* Save core clocks */
if (!mask)
continue;
- if (priv->stbyctrl)
- oldval = readb(priv->base + STBCR(reg));
+ if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A)
+ oldval = readb(priv->base + priv->control_regs[reg]);
else
- oldval = readl(priv->base + SMSTPCR(reg));
+ oldval = readl(priv->base + priv->control_regs[reg]);
newval = oldval & ~mask;
newval |= priv->smstpcr_saved[reg].val & mask;
if (newval == oldval)
continue;
- if (priv->stbyctrl) {
- writeb(newval, priv->base + STBCR(reg));
+ if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A) {
+ writeb(newval, priv->base + priv->control_regs[reg]);
/* dummy read to ensure write has completed */
- readb(priv->base + STBCR(reg));
- barrier_data(priv->base + STBCR(reg));
+ readb(priv->base + priv->control_regs[reg]);
+ barrier_data(priv->base + priv->control_regs[reg]);
continue;
} else
- writel(newval, priv->base + SMSTPCR(reg));
+ writel(newval, priv->base + priv->control_regs[reg]);
/* Wait until enabled clocks are really enabled */
mask &= ~priv->smstpcr_saved[reg].val;
continue;
for (i = 1000; i > 0; --i) {
- oldval = readl(priv->base + MSTPSR(reg));
+ oldval = readl(priv->base + priv->status_regs[reg]);
if (!(oldval & mask))
break;
cpu_relax();
if (!i)
dev_warn(dev, "Failed to enable %s%u[0x%x]\n",
- priv->stbyctrl ? "STB" : "SMSTP", reg,
- oldval & mask);
+ priv->reg_layout == CLK_REG_LAYOUT_RZ_A ?
+ "STB" : "SMSTP", reg, oldval & mask);
}
return 0;
priv->num_mod_clks = info->num_hw_mod_clks;
priv->last_dt_core_clk = info->last_dt_core_clk;
RAW_INIT_NOTIFIER_HEAD(&priv->notifiers);
- priv->stbyctrl = info->stbyctrl;
+ priv->reg_layout = info->reg_layout;
+ if (priv->reg_layout == CLK_REG_LAYOUT_RCAR_GEN2_AND_GEN3) {
+ priv->status_regs = mstpsr;
+ priv->control_regs = smstpcr;
+ priv->reset_regs = srcr;
+ priv->reset_clear_regs = srstclr;
+ } else if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A) {
+ priv->control_regs = stbcr;
+ } else {
+ error = -EINVAL;
+ goto out_err;
+ }
for (i = 0; i < nclks; i++)
priv->clks[i] = ERR_PTR(-ENOENT);
return error;
/* Reset Controller not supported for Standby Control SoCs */
- if (info->stbyctrl)
+ if (priv->reg_layout == CLK_REG_LAYOUT_RZ_A)
return 0;
error = cpg_mssr_reset_controller_register(priv);
projects / linux-2.6-microblaze.git / commitdiff