L: openmoko-kernel@lists.openmoko.org (subscribers-only)
S: Orphan
W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
-F: arch/arm/mach-s3c24xx/gta02.h
-F: arch/arm/mach-s3c24xx/mach-gta02.c
+F: arch/arm/mach-s3c/gta02.h
+F: arch/arm/mach-s3c/mach-gta02.c
ARM/Orion SoC/Technologic Systems TS-78xx platform support
M: Alexander Clouter <alex@digriz.org.uk>
F: arch/arm/boot/dts/s3c*
F: arch/arm/boot/dts/s5p*
F: arch/arm/mach-exynos*/
-F: arch/arm/mach-s3c24*/
-F: arch/arm/mach-s3c64xx/
+F: arch/arm/mach-s3c/
F: arch/arm/mach-s5p*/
-F: arch/arm/plat-samsung/
F: arch/arm64/boot/dts/exynos/
F: drivers/*/*/*s3c24*
F: drivers/*/*s3c24*
M: Simtec Linux Team <linux@simtec.co.uk>
S: Supported
W: http://www.simtec.co.uk/products/EB2410ITX/
-F: arch/arm/mach-s3c24xx/bast-ide.c
-F: arch/arm/mach-s3c24xx/bast-irq.c
-F: arch/arm/mach-s3c24xx/mach-bast.c
+F: arch/arm/mach-s3c/bast-ide.c
+F: arch/arm/mach-s3c/bast-irq.c
+F: arch/arm/mach-s3c/mach-bast.c
SIOX
M: Thorsten Scherer <t.scherer@eckelmann.de>
F: Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
F: Documentation/devicetree/bindings/sound/wlf,arizona.yaml
F: Documentation/hwmon/wm83??.rst
-F: arch/arm/mach-s3c64xx/mach-crag6410*
+F: arch/arm/mach-s3c/mach-crag6410*
F: drivers/clk/clk-wm83*.c
F: drivers/extcon/extcon-arizona.c
F: drivers/gpio/gpio-*wm*.c
source "arch/arm/mach-ep93xx/Kconfig"
source "arch/arm/mach-exynos/Kconfig"
-source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
-source "arch/arm/mach-s3c24xx/Kconfig"
-
-source "arch/arm/mach-s3c64xx/Kconfig"
+source "arch/arm/mach-s3c/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
-machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx
-machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
+machine-$(CONFIG_PLAT_SAMSUNG) += s3c
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_RENESAS) += shmobile
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
plat-$(CONFIG_ARCH_OMAP) += omap
-plat-$(CONFIG_ARCH_S3C64XX) += samsung
plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
-plat-$(CONFIG_PLAT_S3C24XX) += samsung
plat-$(CONFIG_PLAT_VERSATILE) += versatile
ifeq ($(CONFIG_ARCH_EBSA110),y)
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright 2009 Simtec Electronics
+
+source "arch/arm/mach-s3c/Kconfig.s3c24xx"
+source "arch/arm/mach-s3c/Kconfig.s3c64xx"
+
+config PLAT_SAMSUNG
+ bool
+ depends on PLAT_S3C24XX || ARCH_S3C64XX
+ default y
+ select GENERIC_IRQ_CHIP
+ select NO_IOPORT_MAP
+ select SOC_SAMSUNG
+ help
+ Base platform code for all Samsung SoC based systems
+
+config SAMSUNG_PM
+ bool
+ depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX)
+ default y
+ help
+ Base platform power management code for samsung code
+
+if PLAT_SAMSUNG
+menu "Samsung Common options"
+
+# boot configurations
+
+comment "Boot options"
+
+config S3C_LOWLEVEL_UART_PORT
+ int "S3C UART to use for low-level messages"
+ depends on ARCH_S3C64XX
+ default 0
+ help
+ Choice of which UART port to use for the low-level messages,
+ such as the `Uncompressing...` at start time. The value of
+ this configuration should be between zero and two. The port
+ must have been initialised by the boot-loader before use.
+
+config SAMSUNG_ATAGS
+ def_bool n
+ depends on ATAGS
+ help
+ This option enables ATAGS based boot support code for
+ Samsung platforms, including static platform devices, legacy
+ clock, timer and interrupt initialization, etc.
+
+ Platforms that support only DT based boot need not to select
+ this option.
+
+if SAMSUNG_ATAGS
+
+config S3C_GPIO_SPACE
+ int "Space between gpio banks"
+ default 0
+ help
+ Add a number of spare GPIO entries between each bank for debugging
+ purposes. This allows any problems where an counter overflows from
+ one bank to another to be caught, at the expense of using a little
+ more memory.
+
+config S3C_GPIO_TRACK
+ bool
+ help
+ Internal configuration option to enable the s3c specific gpio
+ chip tracking if the platform requires it.
+
+# ADC driver
+
+config S3C_ADC
+ bool "ADC common driver support"
+ depends on !ARCH_MULTIPLATFORM
+ help
+ Core support for the ADC block found in the Samsung SoC systems
+ for drivers such as the touchscreen and hwmon to use to share
+ this resource.
+
+# device definitions to compile in
+
+config S3C_DEV_HSMMC
+ bool
+ help
+ Compile in platform device definitions for HSMMC code
+
+config S3C_DEV_HSMMC1
+ bool
+ help
+ Compile in platform device definitions for HSMMC channel 1
+
+config S3C_DEV_HSMMC2
+ bool
+ help
+ Compile in platform device definitions for HSMMC channel 2
+
+config S3C_DEV_HSMMC3
+ bool
+ help
+ Compile in platform device definitions for HSMMC channel 3
+
+config S3C_DEV_HWMON
+ bool
+ help
+ Compile in platform device definitions for HWMON
+
+config S3C_DEV_I2C1
+ bool
+ help
+ Compile in platform device definitions for I2C channel 1
+
+config S3C_DEV_I2C2
+ bool
+ help
+ Compile in platform device definitions for I2C channel 2
+
+config S3C_DEV_I2C3
+ bool
+ help
+ Compile in platform device definition for I2C controller 3
+
+config S3C_DEV_I2C4
+ bool
+ help
+ Compile in platform device definition for I2C controller 4
+
+config S3C_DEV_I2C5
+ bool
+ help
+ Compile in platform device definition for I2C controller 5
+
+config S3C_DEV_I2C6
+ bool
+ help
+ Compile in platform device definition for I2C controller 6
+
+config S3C_DEV_I2C7
+ bool
+ help
+ Compile in platform device definition for I2C controller 7
+
+config S3C_DEV_FB
+ bool
+ help
+ Compile in platform device definition for framebuffer
+
+config S3C_DEV_USB_HOST
+ bool
+ help
+ Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+ bool
+ help
+ Compile in platform device definition for USB high-speed OtG
+
+config S3C_DEV_WDT
+ bool
+ default y if ARCH_S3C24XX
+ help
+ Compile in platform device definition for Watchdog Timer
+
+config S3C_DEV_NAND
+ bool
+ help
+ Compile in platform device definition for NAND controller
+
+config S3C_DEV_ONENAND
+ bool
+ help
+ Compile in platform device definition for OneNAND controller
+
+config S3C_DEV_RTC
+ bool
+ help
+ Compile in platform device definition for RTC
+
+config SAMSUNG_DEV_ADC
+ bool
+ help
+ Compile in platform device definition for ADC controller
+
+config SAMSUNG_DEV_IDE
+ bool
+ help
+ Compile in platform device definitions for IDE
+
+config S3C64XX_DEV_SPI0
+ bool
+ help
+ Compile in platform device definitions for S3C64XX's type
+ SPI controller 0
+
+config S3C64XX_DEV_SPI1
+ bool
+ help
+ Compile in platform device definitions for S3C64XX's type
+ SPI controller 1
+
+config S3C64XX_DEV_SPI2
+ bool
+ help
+ Compile in platform device definitions for S3C64XX's type
+ SPI controller 2
+
+config SAMSUNG_DEV_TS
+ bool
+ help
+ Common in platform device definitions for touchscreen device
+
+config SAMSUNG_DEV_KEYPAD
+ bool
+ help
+ Compile in platform device definitions for keypad
+
+config SAMSUNG_DEV_PWM
+ bool
+ default y if ARCH_S3C24XX
+ help
+ Compile in platform device definition for PWM Timer
+
+config S3C24XX_PWM
+ bool "PWM device support"
+ select PWM
+ select PWM_SAMSUNG
+ help
+ Support for exporting the PWM timer blocks via the pwm device
+ system
+
+config GPIO_SAMSUNG
+ def_bool y
+
+config SAMSUNG_PM_GPIO
+ bool
+ default y if GPIO_SAMSUNG && PM
+ help
+ Include legacy GPIO power management code for platforms not using
+ pinctrl-samsung driver.
+endif
+
+config SAMSUNG_WAKEMASK
+ bool
+ depends on PM
+ help
+ Compile support for wakeup-mask controls found on the S3C6400
+ and above. This code allows a set of interrupt to wakeup-mask
+ mappings. See <plat/wakeup-mask.h>
+
+endmenu
+endif
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2012 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Copyright 2007 Simtec Electronics
+
+if ARCH_S3C24XX
+
+config PLAT_S3C24XX
+ def_bool y
+ select GPIOLIB
+ select NO_IOPORT_MAP
+ select S3C_DEV_NAND
+ select IRQ_DOMAIN
+ select COMMON_CLK
+ help
+ Base platform code for any Samsung S3C24XX device
+
+
+
+menu "Samsung S3C24XX SoCs Support"
+
+comment "S3C24XX SoCs"
+
+config CPU_S3C2410
+ bool "Samsung S3C2410"
+ default y
+ select CPU_ARM920T
+ select S3C2410_COMMON_CLK
+ select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
+ select S3C2410_PM if PM
+ help
+ Support for S3C2410 and S3C2410A family from the S3C24XX line
+ of Samsung Mobile CPUs.
+
+config CPU_S3C2412
+ bool "Samsung S3C2412"
+ select CPU_ARM926T
+ select S3C2412_COMMON_CLK
+ select S3C2412_PM if PM_SLEEP
+ help
+ Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
+
+config CPU_S3C2416
+ bool "Samsung S3C2416/S3C2450"
+ select CPU_ARM926T
+ select S3C2416_PM if PM_SLEEP
+ select S3C2443_COMMON_CLK
+ help
+ Support for the S3C2416 SoC from the S3C24XX line
+
+config CPU_S3C2440
+ bool "Samsung S3C2440"
+ select CPU_ARM920T
+ select S3C2410_COMMON_CLK
+ select S3C2410_PM if PM_SLEEP
+ help
+ Support for S3C2440 Samsung Mobile CPU based systems.
+
+config CPU_S3C2442
+ bool "Samsung S3C2442"
+ select CPU_ARM920T
+ select S3C2410_COMMON_CLK
+ select S3C2410_PM if PM_SLEEP
+ help
+ Support for S3C2442 Samsung Mobile CPU based systems.
+
+config CPU_S3C244X
+ def_bool y
+ depends on CPU_S3C2440 || CPU_S3C2442
+
+config CPU_S3C2443
+ bool "Samsung S3C2443"
+ select CPU_ARM920T
+ select S3C2443_COMMON_CLK
+ help
+ Support for the S3C2443 SoC from the S3C24XX line
+
+# common code
+
+config S3C24XX_SMDK
+ bool
+ help
+ Common machine code for SMDK2410 and SMDK2440
+
+config S3C24XX_SIMTEC_AUDIO
+ bool
+ depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
+ default y
+ help
+ Add audio devices for common Simtec S3C24XX boards
+
+config S3C24XX_SIMTEC_PM
+ bool
+ help
+ Common power management code for systems that are
+ compatible with the Simtec style of power management
+
+config S3C24XX_SIMTEC_USB
+ bool
+ help
+ USB management code for common Simtec S3C24XX boards
+
+config S3C24XX_SETUP_TS
+ bool
+ help
+ Compile in platform device definition for Samsung TouchScreen.
+
+config S3C2410_PM
+ bool
+ help
+ Power Management code common to S3C2410 and better
+
+config S3C24XX_PLL
+ bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
+ depends on ARM_S3C24XX_CPUFREQ
+ help
+ Compile in support for changing the PLL frequency from the
+ S3C24XX series CPUfreq driver. The PLL takes time to settle
+ after a frequency change, so by default it is not enabled.
+
+ This also means that the PLL tables for the selected CPU(s) will
+ be built which may increase the size of the kernel image.
+
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+ bool
+ depends on ARM_S3C24XX_CPUFREQ
+ help
+ Internal node to select io timing code that is common to the s3c2410
+ and s3c2440/s3c2442 cpu frequency support.
+
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+ bool
+ depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443)
+ help
+ Intel node to select io timing code that is common to the s3c2412
+ and the s3c2443.
+
+# cpu-specific sections
+
+if CPU_S3C2410
+
+config S3C2410_PLL
+ bool
+ depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL
+ default y
+ help
+ Select the PLL table for the S3C2410
+
+config S3C24XX_SIMTEC_NOR
+ bool
+ help
+ Internal node to specify machine has simtec NOR mapping
+
+config MACH_BAST_IDE
+ bool
+ select HAVE_PATA_PLATFORM
+ help
+ Internal node for machines with an BAST style IDE
+ interface
+
+comment "S3C2410 Boards"
+
+#
+# The "S3C2410 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_AML_M5900
+ bool "AML M5900 Series"
+ select S3C24XX_SIMTEC_PM if PM
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the American Microsystems M5900 Series
+ <http://www.amltd.com>
+
+config ARCH_BAST
+ bool "Simtec Electronics BAST (EB2410ITX)"
+ select ISA
+ select MACH_BAST_IDE
+ select S3C2410_COMMON_DCLK
+ select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
+ select S3C24XX_SIMTEC_NOR
+ select S3C24XX_SIMTEC_PM if PM
+ select S3C24XX_SIMTEC_USB
+ select S3C_DEV_HWMON
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Simtec Electronics EB2410ITX
+ development board (also known as BAST)
+
+config BAST_PC104_IRQ
+ bool "BAST PC104 IRQ support"
+ depends on ARCH_BAST
+ default y
+ help
+ Say Y here to enable the PC104 IRQ routing on the
+ Simtec BAST (EB2410ITX)
+
+config ARCH_H1940
+ bool "IPAQ H1940"
+ select PM_H1940 if PM
+ select S3C24XX_SETUP_TS
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the HP IPAQ H1940
+
+config H1940BT
+ tristate "Control the state of H1940 bluetooth chip"
+ depends on ARCH_H1940
+ depends on RFKILL
+ help
+ This is a simple driver that is able to control
+ the state of built in bluetooth chip on h1940.
+
+config MACH_N30
+ bool "Acer N30 family"
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you want suppt for the Acer N30, Acer N35,
+ Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
+
+config MACH_OTOM
+ bool "NexVision OTOM Board"
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Nex Vision OTOM board
+
+config MACH_QT2410
+ bool "QT2410"
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Armzone QT2410
+
+config ARCH_SMDK2410
+ bool "SMDK2410/A9M2410"
+ select S3C24XX_SMDK
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the SMDK2410 or the derived module A9M2410
+ <http://www.fsforth.de>
+
+config MACH_TCT_HAMMER
+ bool "TCT Hammer Board"
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the TinCanTools Hammer Board
+ <https://www.tincantools.com>
+
+config MACH_VR1000
+ bool "Thorcom VR1000"
+ select MACH_BAST_IDE
+ select S3C2410_COMMON_DCLK
+ select S3C24XX_SIMTEC_NOR
+ select S3C24XX_SIMTEC_PM if PM
+ select S3C24XX_SIMTEC_USB
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Thorcom VR1000 board.
+
+endif # CPU_S3C2410
+
+config S3C2412_PM_SLEEP
+ bool
+ help
+ Internal config node to apply sleep for S3C2412 power management.
+ Can be selected by another SoCs such as S3C2416 with similar
+ sleep procedure.
+
+if CPU_S3C2412
+
+config CPU_S3C2412_ONLY
+ bool
+ depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \
+ !CPU_S3C2442 && !CPU_S3C2443
+ default y
+
+config S3C2412_PM
+ bool
+ select S3C2412_PM_SLEEP
+ select SAMSUNG_WAKEMASK
+ help
+ Internal config node to apply S3C2412 power management
+
+comment "S3C2412 Boards"
+
+#
+# The "S3C2412 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_JIVE
+ bool "Logitech Jive"
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Logitech Jive.
+
+config MACH_JIVE_SHOW_BOOTLOADER
+ bool "Allow access to bootloader partitions in MTD"
+ depends on MACH_JIVE
+
+config MACH_S3C2413
+ bool
+ help
+ Internal node for S3C2413 version of SMDK2413, so that
+ machine_is_s3c2413() will work when MACH_SMDK2413 is
+ selected
+
+config MACH_SMDK2412
+ bool "SMDK2412"
+ select MACH_SMDK2413
+ help
+ Say Y here if you are using an SMDK2412
+
+ Note, this shares support with SMDK2413, so will automatically
+ select MACH_SMDK2413.
+
+config MACH_SMDK2413
+ bool "SMDK2413"
+ select MACH_S3C2413
+ select S3C24XX_SMDK
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using an SMDK2413
+
+config MACH_VSTMS
+ bool "VMSTMS"
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using an VSTMS board
+
+endif # CPU_S3C2412
+
+if CPU_S3C2416
+
+config S3C2416_PM
+ bool
+ select S3C2412_PM_SLEEP
+ select SAMSUNG_WAKEMASK
+ help
+ Internal config node to apply S3C2416 power management
+
+config S3C2416_SETUP_SDHCI
+ bool
+ select S3C2416_SETUP_SDHCI_GPIO
+ help
+ Internal helper functions for S3C2416 based SDHCI systems
+
+config S3C2416_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for SDHCI gpio.
+
+comment "S3C2416 Boards"
+
+config MACH_SMDK2416
+ bool "SMDK2416"
+ select S3C2416_SETUP_SDHCI
+ select S3C24XX_SMDK
+ select S3C_DEV_FB
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using an SMDK2416
+
+config MACH_S3C2416_DT
+ bool "Samsung S3C2416 machine using devicetree"
+ select TIMER_OF
+ select USE_OF
+ select PINCTRL
+ select PINCTRL_S3C24XX
+ help
+ Machine support for Samsung S3C2416 machines with device tree enabled.
+ Select this if a fdt blob is available for the S3C2416 SoC based board.
+ Note: This is under development and not all peripherals can be supported
+ with this machine file.
+
+endif # CPU_S3C2416
+
+if CPU_S3C2440 || CPU_S3C2442
+
+config S3C2440_XTAL_12000000
+ bool
+ help
+ Indicate that the build needs to support 12MHz system
+ crystal.
+
+config S3C2440_XTAL_16934400
+ bool
+ help
+ Indicate that the build needs to support 16.9344MHz system
+ crystal.
+
+config S3C2440_PLL_12000000
+ bool
+ depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+ bool
+ depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+endif
+
+if CPU_S3C2440
+
+comment "S3C2440 Boards"
+
+#
+# The "S3C2440 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_ANUBIS
+ bool "Simtec Electronics ANUBIS"
+ select HAVE_PATA_PLATFORM
+ select S3C2410_COMMON_DCLK
+ select S3C2440_XTAL_12000000
+ select S3C24XX_SIMTEC_PM if PM
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Simtec Electronics ANUBIS
+ development system
+
+config MACH_AT2440EVB
+ bool "Avantech AT2440EVB development board"
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the AT2440EVB development board
+
+config MACH_MINI2440
+ bool "MINI2440 development board"
+ select LEDS_CLASS
+ select LEDS_TRIGGERS
+ select LEDS_TRIGGER_BACKLIGHT
+ select NEW_LEDS
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
+ available via various sources. It can come with a 3.5" or 7" touch LCD.
+
+config MACH_NEXCODER_2440
+ bool "NexVision NEXCODER 2440 Light Board"
+ select S3C2440_XTAL_12000000
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+
+config MACH_OSIRIS
+ bool "Simtec IM2440D20 (OSIRIS) module"
+ select S3C2410_COMMON_DCLK
+ select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
+ select S3C2440_XTAL_12000000
+ select S3C24XX_SIMTEC_PM if PM
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Simtec IM2440D20 module, also
+ known as the Osiris.
+
+config MACH_OSIRIS_DVS
+ tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
+ depends on MACH_OSIRIS
+ depends on TPS65010
+ help
+ Say Y/M here if you want to have dynamic voltage scaling support
+ on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
+
+ The DVS driver alters the voltage supplied to the ARM core
+ depending on the frequency it is running at. The driver itself
+ does not do any of the frequency alteration, which is left up
+ to the cpufreq driver.
+
+config MACH_RX3715
+ bool "HP iPAQ rx3715"
+ select PM_H1940 if PM
+ select S3C2440_XTAL_16934400
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the HP iPAQ rx3715.
+
+config ARCH_S3C2440
+ bool "SMDK2440"
+ select S3C2440_XTAL_16934400
+ select S3C24XX_SMDK
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the SMDK2440.
+
+config SMDK2440_CPU2440
+ bool "SMDK2440 with S3C2440 CPU module"
+ default y if ARCH_S3C2440
+ select S3C2440_XTAL_16934400
+
+endif # CPU_S3C2440
+
+if CPU_S3C2442
+
+comment "S3C2442 Boards"
+
+#
+# The "S3C2442 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_NEO1973_GTA02
+ bool "Openmoko GTA02 / Freerunner phone"
+ select I2C
+ select MFD_PCF50633
+ select PCF50633_GPIO
+ select POWER_SUPPLY
+ select S3C24XX_PWM
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
+config MACH_RX1950
+ bool "HP iPAQ rx1950"
+ select I2C
+ select PM_H1940 if PM
+ select S3C2410_COMMON_DCLK
+ select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
+ select S3C2440_XTAL_16934400
+ select S3C24XX_PWM
+ select S3C_DEV_NAND
+ help
+ Say Y here if you're using HP iPAQ rx1950
+
+endif # CPU_S3C2442
+
+if CPU_S3C2443 || CPU_S3C2416
+
+config S3C2443_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations
+
+endif # CPU_S3C2443 || CPU_S3C2416
+
+if CPU_S3C2443
+
+comment "S3C2443 Boards"
+
+config MACH_SMDK2443
+ bool "SMDK2443"
+ select S3C24XX_SMDK
+ select S3C_DEV_HSMMC1
+ help
+ Say Y here if you are using an SMDK2443
+
+endif # CPU_S3C2443
+
+config PM_H1940
+ bool
+ help
+ Internal node for H1940 and related PM
+
+endmenu # Samsung S3C24XX SoCs Support
+
+endif # ARCH_S3C24XX
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright 2008 Openmoko, Inc.
+# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+
+menuconfig ARCH_S3C64XX
+ bool "Samsung S3C64XX"
+ depends on ARCH_MULTI_V6
+ select ARM_AMBA
+ select ARM_VIC
+ select CLKSRC_SAMSUNG_PWM
+ select COMMON_CLK_SAMSUNG
+ select GPIO_SAMSUNG if ATAGS
+ select GPIOLIB
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_TCM
+ select PLAT_SAMSUNG
+ select PM_GENERIC_DOMAINS if PM
+ select S3C_DEV_NAND if ATAGS
+ select S3C_GPIO_TRACK if ATAGS
+ select S3C2410_WATCHDOG
+ select SAMSUNG_ATAGS if ATAGS
+ select SAMSUNG_WAKEMASK if PM
+ select WATCHDOG
+ help
+ Samsung S3C64XX series based systems
+
+if ARCH_S3C64XX
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+ bool
+ help
+ Enable S3C6400 CPU support
+
+config CPU_S3C6410
+ bool
+ help
+ Enable S3C6410 CPU support
+
+config S3C64XX_PL080
+ def_bool DMADEVICES
+ select AMBA_PL08X
+
+config S3C64XX_SETUP_SDHCI
+ bool
+ select S3C64XX_SETUP_SDHCI_GPIO
+ help
+ Internal configuration for default SDHCI setup for S3C6400 and
+ S3C6410 SoCs.
+
+config S3C64XX_DEV_ONENAND1
+ bool
+ help
+ Compile in platform device definition for OneNAND1 controller
+
+config SAMSUNG_DEV_BACKLIGHT
+ bool
+ depends on SAMSUNG_DEV_PWM
+ help
+ Compile in platform device definition LCD backlight with PWM Timer
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+ bool
+ default y
+ help
+ Common setup code for i2c bus 0.
+
+ Note, currently since i2c0 is always compiled, this setup helper
+ is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_IDE
+ bool
+ help
+ Common setup code for S3C64XX IDE.
+
+config S3C64XX_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_KEYPAD
+ bool
+ help
+ Common setup code for S3C64XX KEYPAD GPIO configurations
+
+config S3C64XX_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for S3C64XX SDHCI GPIO configurations
+
+config S3C64XX_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations
+
+config S3C64XX_SETUP_USB_PHY
+ bool
+ help
+ Common setup code for USB PHY controller
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+ bool "SMDK6400"
+ depends on ATAGS
+ select CPU_S3C6400
+ select S3C64XX_SETUP_SDHCI
+ select S3C_DEV_HSMMC1
+ help
+ Machine support for the Samsung SMDK6400
+
+# S3C6410 machine support
+
+config MACH_ANW6410
+ bool "A&W6410"
+ depends on ATAGS
+ select CPU_S3C6410
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C_DEV_FB
+ help
+ Machine support for the A&W6410
+
+config MACH_MINI6410
+ bool "MINI6410"
+ depends on ATAGS
+ select CPU_S3C6410
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_SDHCI
+ select S3C_DEV_FB
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_TS
+ help
+ Machine support for the FriendlyARM MINI6410
+
+config MACH_REAL6410
+ bool "REAL6410"
+ depends on ATAGS
+ select CPU_S3C6410
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_SDHCI
+ select S3C_DEV_FB
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_TS
+ help
+ Machine support for the CoreWind REAL6410
+
+config MACH_SMDK6410
+ bool "SMDK6410"
+ depends on ATAGS
+ select CPU_S3C6410
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_I2C1
+ select S3C64XX_SETUP_IDE
+ select S3C64XX_SETUP_KEYPAD
+ select S3C64XX_SETUP_SDHCI
+ select S3C64XX_SETUP_USB_PHY
+ select S3C_DEV_FB
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_I2C1
+ select S3C_DEV_RTC
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_USB_HSOTG
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_IDE
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_PWM
+ select SAMSUNG_DEV_TS
+ help
+ Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+ prompt "SMDK6410 MMC/SD slot setup"
+ depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+ bool "Use channel 0 only"
+ depends on MACH_SMDK6410
+ help
+ Select CON7 (channel 0) as the MMC/SD slot, as
+ at least some SMDK6410 boards come with the
+ resistors fitted so that the card detects for
+ channels 0 and 1 are the same.
+
+config SMDK6410_SD_CH1
+ bool "Use channel 1 only"
+ depends on MACH_SMDK6410
+ help
+ Select CON6 (channel 1) as the MMC/SD slot, as
+ at least some SMDK6410 boards come with the
+ resistors fitted so that the card detects for
+ channels 0 and 1 are the same.
+
+endchoice
+
+config SMDK6410_WM1190_EV1
+ bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+ depends on MACH_SMDK6410
+ depends on I2C=y
+ select MFD_WM8350_I2C
+ select REGULATOR
+ select REGULATOR_WM8350
+ help
+ The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+ and audio daughtercard for the Samsung SMDK6410 reference
+ platform. Enabling this option will build support for this
+ module into the kernel. The presence of the module will be
+ detected at runtime so the resulting kernel can be used
+ with or without the 1190-EV1 fitted.
+
+config SMDK6410_WM1192_EV1
+ bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
+ depends on MACH_SMDK6410
+ depends on I2C=y
+ select MFD_WM831X
+ select MFD_WM831X_I2C
+ select REGULATOR
+ select REGULATOR_WM831X
+ help
+ The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
+ daughtercard for the Samsung SMDK6410 reference platform.
+ Enabling this option will build support for this module into
+ the kernel. The presence of the daughtercard will be
+ detected at runtime so the resulting kernel can be used
+ with or without the 1192-EV1 fitted.
+
+config MACH_NCP
+ bool "NCP"
+ depends on ATAGS
+ select CPU_S3C6410
+ select S3C64XX_SETUP_I2C1
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_I2C1
+ help
+ Machine support for the Samsung NCP
+
+config MACH_HMT
+ bool "Airgoo HMT"
+ depends on ATAGS
+ select CPU_S3C6410
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C_DEV_FB
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ select SAMSUNG_DEV_PWM
+ help
+ Machine support for the Airgoo HMT
+
+config MACH_SMARTQ
+ bool
+ select CPU_S3C6410
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_SDHCI
+ select S3C64XX_SETUP_USB_PHY
+ select S3C_DEV_FB
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HWMON
+ select S3C_DEV_RTC
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_USB_HSOTG
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_PWM
+ select SAMSUNG_DEV_TS
+ help
+ Shared machine support for SmartQ 5/7
+
+config MACH_SMARTQ5
+ bool "SmartQ 5"
+ depends on ATAGS
+ select MACH_SMARTQ
+ help
+ Machine support for the SmartQ 5
+
+config MACH_SMARTQ7
+ bool "SmartQ 7"
+ depends on ATAGS
+ select MACH_SMARTQ
+ help
+ Machine support for the SmartQ 7
+
+config MACH_WLF_CRAGG_6410
+ bool "Wolfson Cragganmore 6410"
+ depends on ATAGS
+ depends on I2C=y
+ select CPU_S3C6410
+ select LEDS_GPIO_REGISTER
+ select S3C64XX_DEV_SPI0
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_I2C1
+ select S3C64XX_SETUP_IDE
+ select S3C64XX_SETUP_KEYPAD
+ select S3C64XX_SETUP_SDHCI
+ select S3C64XX_SETUP_SPI
+ select S3C64XX_SETUP_USB_PHY
+ select S3C_DEV_FB
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_I2C1
+ select S3C_DEV_RTC
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_USB_HSOTG
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_PWM
+ help
+ Machine support for the Wolfson Cragganmore S3C6410 variant.
+
+config MACH_S3C64XX_DT
+ bool "Samsung S3C6400/S3C6410 machine using Device Tree"
+ select CPU_S3C6400
+ select CPU_S3C6410
+ select PINCTRL
+ select PINCTRL_S3C64XX
+ help
+ Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
+ enabled.
+ Select this if a fdt blob is available for your S3C64XX SoC based
+ board.
+ Note: This is under development and not all peripherals can be
+ supported with this machine file.
+
+endif
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright 2009 Simtec Electronics
+
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include
+
+ifdef CONFIG_ARCH_S3C24XX
+include $(src)/Makefile.s3c24xx
+endif
+
+ifdef CONFIG_ARCH_S3C64XX
+include $(src)/Makefile.s3c64xx
+endif
+
+# Objects we always build independent of SoC choice
+
+obj-y += init.o cpu.o
+
+# ADC
+
+obj-$(CONFIG_S3C_ADC) += adc.o
+
+# devices
+
+obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o
+
+obj-$(CONFIG_SAMSUNG_ATAGS) += devs.o
+obj-$(CONFIG_SAMSUNG_ATAGS) += dev-uart.o
+
+obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o
+
+# PM support
+
+obj-$(CONFIG_SAMSUNG_PM) += pm.o pm-common.o
+obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
+
+obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+
+ifeq ($(CONFIG_PM_H1940),y)
+ zreladdr-y += 0x30108000
+ params_phys-y := 0x30100100
+else
+ zreladdr-y += 0x30008000
+ params_phys-y := 0x30000100
+endif
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2012 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Copyright 2007 Simtec Electronics
+
+# core
+
+obj-y += s3c24xx.o
+obj-y += irq-s3c24xx.o
+obj-$(CONFIG_SPI_S3C24XX_FIQ) += irq-s3c24xx-fiq.o
+obj-$(CONFIG_SPI_S3C24XX_FIQ) += irq-s3c24xx-fiq-exports.o
+
+obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
+obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
+obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
+
+obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
+obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
+obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
+
+obj-$(CONFIG_CPU_S3C2416) += s3c2416.o
+obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
+
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o
+obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
+
+obj-$(CONFIG_CPU_S3C2443) += s3c2443.o
+
+# PM
+
+obj-$(CONFIG_PM) += pm-s3c24xx.o
+obj-$(CONFIG_PM_SLEEP) += irq-pm-s3c24xx.o sleep-s3c24xx.o
+
+# common code
+
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += cpufreq-utils-s3c24xx.o
+
+obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o
+obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o
+
+#
+# machine support
+# following is ordered alphabetically by option text.
+#
+
+obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
+obj-$(CONFIG_ARCH_BAST) += mach-bast.o
+obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
+obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
+obj-$(CONFIG_H1940BT) += h1940-bluetooth.o
+obj-$(CONFIG_PM_H1940) += pm-h1940.o
+obj-$(CONFIG_MACH_N30) += mach-n30.o
+obj-$(CONFIG_MACH_OTOM) += mach-otom.o
+obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
+obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
+obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o
+obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o
+
+obj-$(CONFIG_MACH_JIVE) += mach-jive.o
+obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
+obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
+
+obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
+obj-$(CONFIG_MACH_S3C2416_DT) += mach-s3c2416-dt.o
+
+obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
+obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
+obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
+obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
+obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
+obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
+
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
+
+obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o
+
+# common bits of machine support
+
+obj-$(CONFIG_S3C24XX_SMDK) += common-smdk-s3c24xx.o
+obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o
+obj-$(CONFIG_S3C24XX_SIMTEC_NOR) += simtec-nor.o
+obj-$(CONFIG_S3C24XX_SIMTEC_PM) += simtec-pm.o
+obj-$(CONFIG_S3C24XX_SIMTEC_USB) += simtec-usb.o
+
+# machine additions
+
+obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
+obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
+
+# device setup
+
+obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c24xx.o
+obj-$(CONFIG_S3C2443_SETUP_SPI) += setup-spi-s3c24xx.o
+obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c-s3c24xx.o
+obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts-s3c24xx.o
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+
+# PM
+
+obj-$(CONFIG_PM) += pm-s3c64xx.o
+obj-$(CONFIG_PM_SLEEP) += sleep-s3c64xx.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle-s3c64xx.o
+
+ifdef CONFIG_SAMSUNG_ATAGS
+
+obj-$(CONFIG_PM_SLEEP) += irq-pm-s3c64xx.o
+
+# Core
+
+obj-y += s3c64xx.o
+obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
+obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_PL080) += pl080.o
+
+# Device support
+
+obj-y += dev-uart-s3c64xx.o
+obj-y += dev-audio-s3c64xx.o
+
+# Device setup
+
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o
+
+obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight-s3c64xx.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
+obj-$(CONFIG_MACH_HMT) += mach-hmt.o
+obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
+obj-$(CONFIG_MACH_NCP) += mach-ncp.o
+obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
+obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
+obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
+obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
+obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
+endif
+
+obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o
--- /dev/null
+// SPDX-License-Identifier: GPL-1.0+
+//
+// Copyright (c) 2008 Simtec Electronics
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+//
+// Samsung ADC device core
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/regulator/consumer.h>
+
+#include <plat/regs-adc.h>
+#include <linux/soc/samsung/s3c-adc.h>
+
+/* This driver is designed to control the usage of the ADC block between
+ * the touchscreen and any other drivers that may need to use it, such as
+ * the hwmon driver.
+ *
+ * Priority will be given to the touchscreen driver, but as this itself is
+ * rate limited it should not starve other requests which are processed in
+ * order that they are received.
+ *
+ * Each user registers to get a client block which uniquely identifies it
+ * and stores information such as the necessary functions to callback when
+ * action is required.
+ */
+
+enum s3c_cpu_type {
+ TYPE_ADCV1, /* S3C24XX */
+ TYPE_ADCV11, /* S3C2443 */
+ TYPE_ADCV12, /* S3C2416, S3C2450 */
+ TYPE_ADCV2, /* S3C64XX */
+ TYPE_ADCV3, /* S5PV210, S5PC110, Exynos4210 */
+};
+
+struct s3c_adc_client {
+ struct platform_device *pdev;
+ struct list_head pend;
+ wait_queue_head_t *wait;
+
+ unsigned int nr_samples;
+ int result;
+ unsigned char is_ts;
+ unsigned char channel;
+
+ void (*select_cb)(struct s3c_adc_client *c, unsigned selected);
+ void (*convert_cb)(struct s3c_adc_client *c,
+ unsigned val1, unsigned val2,
+ unsigned *samples_left);
+};
+
+struct adc_device {
+ struct platform_device *pdev;
+ struct platform_device *owner;
+ struct clk *clk;
+ struct s3c_adc_client *cur;
+ struct s3c_adc_client *ts_pend;
+ void __iomem *regs;
+ spinlock_t lock;
+
+ unsigned int prescale;
+
+ int irq;
+ struct regulator *vdd;
+};
+
+static struct adc_device *adc_dev;
+
+static LIST_HEAD(adc_pending); /* protected by adc_device.lock */
+
+#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
+
+static inline void s3c_adc_convert(struct adc_device *adc)
+{
+ unsigned con = readl(adc->regs + S3C2410_ADCCON);
+
+ con |= S3C2410_ADCCON_ENABLE_START;
+ writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static inline void s3c_adc_select(struct adc_device *adc,
+ struct s3c_adc_client *client)
+{
+ unsigned con = readl(adc->regs + S3C2410_ADCCON);
+ enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
+
+ client->select_cb(client, 1);
+
+ if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV2)
+ con &= ~S3C2410_ADCCON_MUXMASK;
+ con &= ~S3C2410_ADCCON_STDBM;
+ con &= ~S3C2410_ADCCON_STARTMASK;
+
+ if (!client->is_ts) {
+ if (cpu == TYPE_ADCV3)
+ writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
+ else if (cpu == TYPE_ADCV11 || cpu == TYPE_ADCV12)
+ writel(client->channel & 0xf,
+ adc->regs + S3C2443_ADCMUX);
+ else
+ con |= S3C2410_ADCCON_SELMUX(client->channel);
+ }
+
+ writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static void s3c_adc_dbgshow(struct adc_device *adc)
+{
+ adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
+ readl(adc->regs + S3C2410_ADCCON),
+ readl(adc->regs + S3C2410_ADCTSC),
+ readl(adc->regs + S3C2410_ADCDLY));
+}
+
+static void s3c_adc_try(struct adc_device *adc)
+{
+ struct s3c_adc_client *next = adc->ts_pend;
+
+ if (!next && !list_empty(&adc_pending)) {
+ next = list_first_entry(&adc_pending,
+ struct s3c_adc_client, pend);
+ list_del(&next->pend);
+ } else
+ adc->ts_pend = NULL;
+
+ if (next) {
+ adc_dbg(adc, "new client is %p\n", next);
+ adc->cur = next;
+ s3c_adc_select(adc, next);
+ s3c_adc_convert(adc);
+ s3c_adc_dbgshow(adc);
+ }
+}
+
+int s3c_adc_start(struct s3c_adc_client *client,
+ unsigned int channel, unsigned int nr_samples)
+{
+ struct adc_device *adc = adc_dev;
+ unsigned long flags;
+
+ if (!adc) {
+ printk(KERN_ERR "%s: failed to find adc\n", __func__);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&adc->lock, flags);
+
+ if (client->is_ts && adc->ts_pend) {
+ spin_unlock_irqrestore(&adc->lock, flags);
+ return -EAGAIN;
+ }
+
+ client->channel = channel;
+ client->nr_samples = nr_samples;
+
+ if (client->is_ts)
+ adc->ts_pend = client;
+ else
+ list_add_tail(&client->pend, &adc_pending);
+
+ if (!adc->cur)
+ s3c_adc_try(adc);
+
+ spin_unlock_irqrestore(&adc->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_start);
+
+static void s3c_convert_done(struct s3c_adc_client *client,
+ unsigned v, unsigned u, unsigned *left)
+{
+ client->result = v;
+ wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+ DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+ int ret;
+
+ client->convert_cb = s3c_convert_done;
+ client->wait = &wake;
+ client->result = -1;
+
+ ret = s3c_adc_start(client, ch, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+ if (client->result < 0) {
+ ret = -ETIMEDOUT;
+ goto err;
+ }
+
+ client->convert_cb = NULL;
+ return client->result;
+
+err:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_read);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+ unsigned select)
+{
+}
+
+struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
+ void (*select)(struct s3c_adc_client *client,
+ unsigned int selected),
+ void (*conv)(struct s3c_adc_client *client,
+ unsigned d0, unsigned d1,
+ unsigned *samples_left),
+ unsigned int is_ts)
+{
+ struct s3c_adc_client *client;
+
+ WARN_ON(!pdev);
+
+ if (!select)
+ select = s3c_adc_default_select;
+
+ if (!pdev)
+ return ERR_PTR(-EINVAL);
+
+ client = kzalloc(sizeof(*client), GFP_KERNEL);
+ if (!client)
+ return ERR_PTR(-ENOMEM);
+
+ client->pdev = pdev;
+ client->is_ts = is_ts;
+ client->select_cb = select;
+ client->convert_cb = conv;
+
+ return client;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_register);
+
+void s3c_adc_release(struct s3c_adc_client *client)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&adc_dev->lock, flags);
+
+ /* We should really check that nothing is in progress. */
+ if (adc_dev->cur == client)
+ adc_dev->cur = NULL;
+ if (adc_dev->ts_pend == client)
+ adc_dev->ts_pend = NULL;
+ else {
+ struct list_head *p, *n;
+ struct s3c_adc_client *tmp;
+
+ list_for_each_safe(p, n, &adc_pending) {
+ tmp = list_entry(p, struct s3c_adc_client, pend);
+ if (tmp == client)
+ list_del(&tmp->pend);
+ }
+ }
+
+ if (adc_dev->cur == NULL)
+ s3c_adc_try(adc_dev);
+
+ spin_unlock_irqrestore(&adc_dev->lock, flags);
+ kfree(client);
+}
+EXPORT_SYMBOL_GPL(s3c_adc_release);
+
+static irqreturn_t s3c_adc_irq(int irq, void *pw)
+{
+ struct adc_device *adc = pw;
+ struct s3c_adc_client *client = adc->cur;
+ enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
+ unsigned data0, data1;
+
+ if (!client) {
+ dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
+ goto exit;
+ }
+
+ data0 = readl(adc->regs + S3C2410_ADCDAT0);
+ data1 = readl(adc->regs + S3C2410_ADCDAT1);
+ adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
+
+ client->nr_samples--;
+
+ if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV11) {
+ data0 &= 0x3ff;
+ data1 &= 0x3ff;
+ } else {
+ /* S3C2416/S3C64XX/S5P ADC resolution is 12-bit */
+ data0 &= 0xfff;
+ data1 &= 0xfff;
+ }
+
+ if (client->convert_cb)
+ (client->convert_cb)(client, data0, data1, &client->nr_samples);
+
+ if (client->nr_samples > 0) {
+ /* fire another conversion for this */
+
+ client->select_cb(client, 1);
+ s3c_adc_convert(adc);
+ } else {
+ spin_lock(&adc->lock);
+ (client->select_cb)(client, 0);
+ adc->cur = NULL;
+
+ s3c_adc_try(adc);
+ spin_unlock(&adc->lock);
+ }
+
+exit:
+ if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3) {
+ /* Clear ADC interrupt */
+ writel(0, adc->regs + S3C64XX_ADCCLRINT);
+ }
+ return IRQ_HANDLED;
+}
+
+static int s3c_adc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct adc_device *adc;
+ enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
+ int ret;
+ unsigned tmp;
+
+ adc = devm_kzalloc(dev, sizeof(*adc), GFP_KERNEL);
+ if (!adc)
+ return -ENOMEM;
+
+ spin_lock_init(&adc->lock);
+
+ adc->pdev = pdev;
+ adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+
+ adc->vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(adc->vdd)) {
+ dev_err(dev, "operating without regulator \"vdd\" .\n");
+ return PTR_ERR(adc->vdd);
+ }
+
+ adc->irq = platform_get_irq(pdev, 1);
+ if (adc->irq <= 0)
+ return -ENOENT;
+
+ ret = devm_request_irq(dev, adc->irq, s3c_adc_irq, 0, dev_name(dev),
+ adc);
+ if (ret < 0) {
+ dev_err(dev, "failed to attach adc irq\n");
+ return ret;
+ }
+
+ adc->clk = devm_clk_get(dev, "adc");
+ if (IS_ERR(adc->clk)) {
+ dev_err(dev, "failed to get adc clock\n");
+ return PTR_ERR(adc->clk);
+ }
+
+ adc->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(adc->regs))
+ return PTR_ERR(adc->regs);
+
+ ret = regulator_enable(adc->vdd);
+ if (ret)
+ return ret;
+
+ clk_prepare_enable(adc->clk);
+
+ tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+
+ /* Enable 12-bit ADC resolution */
+ if (cpu == TYPE_ADCV12)
+ tmp |= S3C2416_ADCCON_RESSEL;
+ if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
+ tmp |= S3C64XX_ADCCON_RESSEL;
+
+ writel(tmp, adc->regs + S3C2410_ADCCON);
+
+ dev_info(dev, "attached adc driver\n");
+
+ platform_set_drvdata(pdev, adc);
+ adc_dev = adc;
+
+ return 0;
+}
+
+static int s3c_adc_remove(struct platform_device *pdev)
+{
+ struct adc_device *adc = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(adc->clk);
+ regulator_disable(adc->vdd);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c_adc_suspend(struct device *dev)
+{
+ struct adc_device *adc = dev_get_drvdata(dev);
+ unsigned long flags;
+ u32 con;
+
+ spin_lock_irqsave(&adc->lock, flags);
+
+ con = readl(adc->regs + S3C2410_ADCCON);
+ con |= S3C2410_ADCCON_STDBM;
+ writel(con, adc->regs + S3C2410_ADCCON);
+
+ disable_irq(adc->irq);
+ spin_unlock_irqrestore(&adc->lock, flags);
+ clk_disable(adc->clk);
+ regulator_disable(adc->vdd);
+
+ return 0;
+}
+
+static int s3c_adc_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct adc_device *adc = platform_get_drvdata(pdev);
+ enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
+ int ret;
+ unsigned long tmp;
+
+ ret = regulator_enable(adc->vdd);
+ if (ret)
+ return ret;
+ clk_enable(adc->clk);
+ enable_irq(adc->irq);
+
+ tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+
+ /* Enable 12-bit ADC resolution */
+ if (cpu == TYPE_ADCV12)
+ tmp |= S3C2416_ADCCON_RESSEL;
+ if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
+ tmp |= S3C64XX_ADCCON_RESSEL;
+
+ writel(tmp, adc->regs + S3C2410_ADCCON);
+
+ return 0;
+}
+
+#else
+#define s3c_adc_suspend NULL
+#define s3c_adc_resume NULL
+#endif
+
+static const struct platform_device_id s3c_adc_driver_ids[] = {
+ {
+ .name = "s3c24xx-adc",
+ .driver_data = TYPE_ADCV1,
+ }, {
+ .name = "s3c2443-adc",
+ .driver_data = TYPE_ADCV11,
+ }, {
+ .name = "s3c2416-adc",
+ .driver_data = TYPE_ADCV12,
+ }, {
+ .name = "s3c64xx-adc",
+ .driver_data = TYPE_ADCV2,
+ }, {
+ .name = "samsung-adc-v3",
+ .driver_data = TYPE_ADCV3,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
+
+static const struct dev_pm_ops adc_pm_ops = {
+ .suspend = s3c_adc_suspend,
+ .resume = s3c_adc_resume,
+};
+
+static struct platform_driver s3c_adc_driver = {
+ .id_table = s3c_adc_driver_ids,
+ .driver = {
+ .name = "s3c-adc",
+ .pm = &adc_pm_ops,
+ },
+ .probe = s3c_adc_probe,
+ .remove = s3c_adc_remove,
+};
+
+static int __init adc_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&s3c_adc_driver);
+ if (ret)
+ printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
+
+ return ret;
+}
+
+module_init(adc_init);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - CPLD control constants
+ * ANUBIS - IRQ Number definitions
+ * ANUBIS - Memory map definitions
+ */
+
+#ifndef __MACH_S3C24XX_ANUBIS_H
+#define __MACH_S3C24XX_ANUBIS_H __FILE__
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define ANUBIS_CTRL1_NANDSEL (0x3)
+
+/* IDREG - revision */
+
+#define ANUBIS_IDREG_REVMASK (0x7)
+
+/* irq */
+
+#define ANUBIS_IRQ_IDE0 IRQ_EINT2
+#define ANUBIS_IRQ_IDE1 IRQ_EINT3
+#define ANUBIS_IRQ_ASIX IRQ_EINT1
+
+/* map */
+
+/* start peripherals off after the S3C2410 */
+
+#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000))
+
+#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000)
+#define ANUBIS_PA_CTRL1 ANUBIS_PA_CPLD
+
+#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000)
+#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3 << 23))
+
+#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000)
+#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000)
+#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000)
+#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000)
+
+#endif /* __MACH_S3C24XX_ANUBIS_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CF-ATA Controller core functions
+ */
+
+#ifndef __ASM_PLAT_ATA_CORE_S3C64XX_H
+#define __ASM_PLAT_ATA_CORE_S3C64XX_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+*/
+
+/* re-define device name depending on support. */
+static inline void s3c_cfcon_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_IDE
+ s3c_device_cfcon.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ATA_CORE_S3C64XX_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ */
+
+#ifndef __ASM_PLAT_BACKLIGHT_S3C64XX_H
+#define __ASM_PLAT_BACKLIGHT_S3C64XX_H __FILE__
+
+/* samsung_bl_gpio_info - GPIO info for PWM Backlight control
+ * @no: GPIO number for PWM timer out
+ * @func: Special function of GPIO line for PWM timer
+ */
+struct samsung_bl_gpio_info {
+ int no;
+ int func;
+};
+
+extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
+ struct platform_pwm_backlight_data *bl_data);
+
+#endif /* __ASM_PLAT_BACKLIGHT_S3C64XX_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2007 Simtec Electronics
+// http://www.simtec.co.uk/products/EB2410ITX/
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include "bast.h"
+
+/* IDE ports */
+
+static struct pata_platform_info bast_ide_platdata = {
+ .ioport_shift = 5,
+};
+
+static struct resource bast_ide0_resource[] = {
+ [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
+ [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
+ [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE0),
+};
+
+static struct platform_device bast_device_ide0 = {
+ .name = "pata_platform",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bast_ide0_resource),
+ .resource = bast_ide0_resource,
+ .dev = {
+ .platform_data = &bast_ide_platdata,
+ .coherent_dma_mask = ~0,
+ }
+
+};
+
+static struct resource bast_ide1_resource[] = {
+ [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
+ [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
+ [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE1),
+};
+
+static struct platform_device bast_device_ide1 = {
+ .name = "pata_platform",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bast_ide1_resource),
+ .resource = bast_ide1_resource,
+ .dev = {
+ .platform_data = &bast_ide_platdata,
+ .coherent_dma_mask = ~0,
+ }
+};
+
+static struct platform_device *bast_ide_devices[] __initdata = {
+ &bast_device_ide0,
+ &bast_device_ide1,
+};
+
+static __init int bast_ide_init(void)
+{
+ if (machine_is_bast() || machine_is_vr1000())
+ return platform_add_devices(bast_ide_devices,
+ ARRAY_SIZE(bast_ide_devices));
+
+ return 0;
+}
+
+fs_initcall(bast_ide_init);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2003-2005 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// http://www.simtec.co.uk/products/EB2410ITX/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/irqs.h>
+
+#include "bast.h"
+
+#define irqdbf(x...)
+#define irqdbf2(x...)
+
+/* handle PC104 ISA interrupts from the system CPLD */
+
+/* table of ISA irq nos to the relevant mask... zero means
+ * the irq is not implemented
+*/
+static const unsigned char bast_pc104_irqmasks[] = {
+ 0, /* 0 */
+ 0, /* 1 */
+ 0, /* 2 */
+ 1, /* 3 */
+ 0, /* 4 */
+ 2, /* 5 */
+ 0, /* 6 */
+ 4, /* 7 */
+ 0, /* 8 */
+ 0, /* 9 */
+ 8, /* 10 */
+ 0, /* 11 */
+ 0, /* 12 */
+ 0, /* 13 */
+ 0, /* 14 */
+ 0, /* 15 */
+};
+
+static const unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 };
+
+static void
+bast_pc104_mask(struct irq_data *data)
+{
+ unsigned long temp;
+
+ temp = __raw_readb(BAST_VA_PC104_IRQMASK);
+ temp &= ~bast_pc104_irqmasks[data->irq];
+ __raw_writeb(temp, BAST_VA_PC104_IRQMASK);
+}
+
+static void
+bast_pc104_maskack(struct irq_data *data)
+{
+ struct irq_desc *desc = irq_to_desc(BAST_IRQ_ISA);
+
+ bast_pc104_mask(data);
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+}
+
+static void
+bast_pc104_unmask(struct irq_data *data)
+{
+ unsigned long temp;
+
+ temp = __raw_readb(BAST_VA_PC104_IRQMASK);
+ temp |= bast_pc104_irqmasks[data->irq];
+ __raw_writeb(temp, BAST_VA_PC104_IRQMASK);
+}
+
+static struct irq_chip bast_pc104_chip = {
+ .irq_mask = bast_pc104_mask,
+ .irq_unmask = bast_pc104_unmask,
+ .irq_ack = bast_pc104_maskack
+};
+
+static void bast_irq_pc104_demux(struct irq_desc *desc)
+{
+ unsigned int stat;
+ unsigned int irqno;
+ int i;
+
+ stat = __raw_readb(BAST_VA_PC104_IRQREQ) & 0xf;
+
+ if (unlikely(stat == 0)) {
+ /* ack if we get an irq with nothing (ie, startup) */
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+ } else {
+ /* handle the IRQ */
+
+ for (i = 0; stat != 0; i++, stat >>= 1) {
+ if (stat & 1) {
+ irqno = bast_pc104_irqs[i];
+ generic_handle_irq(irqno);
+ }
+ }
+ }
+}
+
+static __init int bast_irq_init(void)
+{
+ unsigned int i;
+
+ if (machine_is_bast()) {
+ printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n");
+
+ /* zap all the IRQs */
+
+ __raw_writeb(0x0, BAST_VA_PC104_IRQMASK);
+
+ irq_set_chained_handler(BAST_IRQ_ISA, bast_irq_pc104_demux);
+
+ /* register our IRQs */
+
+ for (i = 0; i < 4; i++) {
+ unsigned int irqno = bast_pc104_irqs[i];
+
+ irq_set_chip_and_handler(irqno, &bast_pc104_chip,
+ handle_level_irq);
+ irq_clear_status_flags(irqno, IRQ_NOREQUEST);
+ }
+ }
+
+ return 0;
+}
+
+arch_initcall(bast_irq_init);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * BAST - CPLD control constants
+ * BAST - IRQ Number definitions
+ * BAST - Memory map definitions
+ */
+
+#ifndef __MACH_S3C24XX_BAST_H
+#define __MACH_S3C24XX_BAST_H __FILE__
+
+/* CTRL1 - Audio LR routing */
+
+#define BAST_CPLD_CTRL1_LRCOFF (0x00)
+#define BAST_CPLD_CTRL1_LRCADC (0x01)
+#define BAST_CPLD_CTRL1_LRCDAC (0x02)
+#define BAST_CPLD_CTRL1_LRCARM (0x03)
+#define BAST_CPLD_CTRL1_LRMASK (0x03)
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define BAST_CPLD_CTRL2_WNAND (0x04)
+#define BAST_CPLD_CTLR2_IDERST (0x08)
+
+/* CTRL3 - rom write control, CPLD identity */
+
+#define BAST_CPLD_CTRL3_IDMASK (0x0e)
+#define BAST_CPLD_CTRL3_ROMWEN (0x01)
+
+/* CTRL4 - 8bit LCD interface control/status */
+
+#define BAST_CPLD_CTRL4_LLAT (0x01)
+#define BAST_CPLD_CTRL4_LCDRW (0x02)
+#define BAST_CPLD_CTRL4_LCDCMD (0x04)
+#define BAST_CPLD_CTRL4_LCDE2 (0x01)
+
+/* CTRL5 - DMA routing */
+
+#define BAST_CPLD_DMA0_PRIIDE (0)
+#define BAST_CPLD_DMA0_SECIDE (1)
+#define BAST_CPLD_DMA0_ISA15 (2)
+#define BAST_CPLD_DMA0_ISA36 (3)
+
+#define BAST_CPLD_DMA1_PRIIDE (0 << 2)
+#define BAST_CPLD_DMA1_SECIDE (1 << 2)
+#define BAST_CPLD_DMA1_ISA15 (2 << 2)
+#define BAST_CPLD_DMA1_ISA36 (3 << 2)
+
+/* irq numbers to onboard peripherals */
+
+#define BAST_IRQ_USBOC IRQ_EINT18
+#define BAST_IRQ_IDE0 IRQ_EINT16
+#define BAST_IRQ_IDE1 IRQ_EINT17
+#define BAST_IRQ_PCSERIAL1 IRQ_EINT15
+#define BAST_IRQ_PCSERIAL2 IRQ_EINT14
+#define BAST_IRQ_PCPARALLEL IRQ_EINT13
+#define BAST_IRQ_ASIX IRQ_EINT11
+#define BAST_IRQ_DM9000 IRQ_EINT10
+#define BAST_IRQ_ISA IRQ_EINT9
+#define BAST_IRQ_SMALERT IRQ_EINT8
+
+/* map */
+
+/*
+ * ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000)
+#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
+
+#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000)
+#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
+
+#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000)
+#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
+
+#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000)
+#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000)
+#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000)
+
+#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000)
+#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000)
+
+#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000)
+#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
+
+#define BAST_PA_LCD_RCMD1 (0x8800000)
+#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000)
+
+#define BAST_PA_LCD_WCMD1 (0x8000000)
+#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000)
+
+#define BAST_PA_LCD_RDATA1 (0x9800000)
+#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000)
+
+#define BAST_PA_LCD_WDATA1 (0x9000000)
+#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000)
+
+#define BAST_PA_LCD_RCMD2 (0xA800000)
+#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000)
+
+#define BAST_PA_LCD_WCMD2 (0xA000000)
+#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000)
+
+#define BAST_PA_LCD_RDATA2 (0xB800000)
+#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000)
+
+#define BAST_PA_LCD_WDATA2 (0xB000000)
+#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000)
+
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000 8bit, slow
+ * 0x04000000 to 0x08000000 16bit, slow
+ * 0x08000000 to 0x0C000000 16bit, net
+ * 0x0C000000 to 0x10000000 16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x00000000 to 0x01000000 16MB ISA IO space
+ * 0x01000000 to 0x02000000 16MB ISA memory space
+ * 0x02000000 to 0x02100000 1MB IDE primary channel
+ * 0x02100000 to 0x02200000 1MB IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
+ * 0x02400000 to 0x02500000 1MB ASIX ethernet controller
+ * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller
+ * 0x02600000 to 0x02700000 1MB PC SuperIO controller
+ *
+ * the phyiscal layout of the zones are:
+ * nGCS2 - 8bit, slow
+ * nGCS3 - 16bit, slow
+ * nGCS4 - 16bit, net
+ * nGCS5 - 16bit, fast
+ */
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000)
+#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000)
+#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000)
+#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000)
+#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000)
+#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000)
+#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000)
+#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000)
+#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000)
+
+#define BAST_VAM_CS2 (0x00000000)
+#define BAST_VAM_CS3 (0x04000000)
+#define BAST_VAM_CS4 (0x08000000)
+#define BAST_VAM_CS5 (0x0C000000)
+
+/* physical offset addresses for the peripherals */
+
+#define BAST_PA_ISAIO (0x00000000)
+#define BAST_PA_ASIXNET (0x01000000)
+#define BAST_PA_SUPERIO (0x01800000)
+#define BAST_PA_IDEPRI (0x02000000)
+#define BAST_PA_IDEPRIAUX (0x02800000)
+#define BAST_PA_IDESEC (0x03000000)
+#define BAST_PA_IDESECAUX (0x03800000)
+#define BAST_PA_ISAMEM (0x04000000)
+#define BAST_PA_DM9000 (0x05000000)
+
+/* some configurations for the peripherals */
+
+#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
+
+#define BAST_ASIXNET_CS BAST_VAM_CS5
+#define BAST_DM9000_CS BAST_VAM_CS4
+
+#define BAST_IDE_CS S3C2410_CS5
+
+#endif /* __MACH_S3C24XX_BAST_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// Common code for SMDK2410 and SMDK2440 boards
+//
+// http://www.fluff.org/ben/smdk2440/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+
+#include "common-smdk-s3c24xx.h"
+
+/* LED devices */
+
+static struct gpiod_lookup_table smdk_led4_gpio_table = {
+ .dev_id = "s3c24xx_led.0",
+ .table = {
+ GPIO_LOOKUP("GPF", 4, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table smdk_led5_gpio_table = {
+ .dev_id = "s3c24xx_led.1",
+ .table = {
+ GPIO_LOOKUP("GPF", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table smdk_led6_gpio_table = {
+ .dev_id = "s3c24xx_led.2",
+ .table = {
+ GPIO_LOOKUP("GPF", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table smdk_led7_gpio_table = {
+ .dev_id = "s3c24xx_led.3",
+ .table = {
+ GPIO_LOOKUP("GPF", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+ { },
+ },
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led4 = {
+ .name = "led4",
+ .def_trigger = "timer",
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led5 = {
+ .name = "led5",
+ .def_trigger = "nand-disk",
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led6 = {
+ .name = "led6",
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led7 = {
+ .name = "led7",
+};
+
+static struct platform_device smdk_led4 = {
+ .name = "s3c24xx_led",
+ .id = 0,
+ .dev = {
+ .platform_data = &smdk_pdata_led4,
+ },
+};
+
+static struct platform_device smdk_led5 = {
+ .name = "s3c24xx_led",
+ .id = 1,
+ .dev = {
+ .platform_data = &smdk_pdata_led5,
+ },
+};
+
+static struct platform_device smdk_led6 = {
+ .name = "s3c24xx_led",
+ .id = 2,
+ .dev = {
+ .platform_data = &smdk_pdata_led6,
+ },
+};
+
+static struct platform_device smdk_led7 = {
+ .name = "s3c24xx_led",
+ .id = 3,
+ .dev = {
+ .platform_data = &smdk_pdata_led7,
+ },
+};
+
+/* NAND parititon from 2.4.18-swl5 */
+
+static struct mtd_partition smdk_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "S3C2410 flash partition 1",
+ .offset = 0,
+ .size = SZ_2M,
+ },
+ [2] = {
+ .name = "S3C2410 flash partition 2",
+ .offset = SZ_4M,
+ .size = SZ_4M,
+ },
+ [3] = {
+ .name = "S3C2410 flash partition 3",
+ .offset = SZ_8M,
+ .size = SZ_2M,
+ },
+ [4] = {
+ .name = "S3C2410 flash partition 4",
+ .offset = SZ_1M * 10,
+ .size = SZ_4M,
+ },
+ [5] = {
+ .name = "S3C2410 flash partition 5",
+ .offset = SZ_1M * 14,
+ .size = SZ_1M * 10,
+ },
+ [6] = {
+ .name = "S3C2410 flash partition 6",
+ .offset = SZ_1M * 24,
+ .size = SZ_1M * 24,
+ },
+ [7] = {
+ .name = "S3C2410 flash partition 7",
+ .offset = SZ_1M * 48,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct s3c2410_nand_set smdk_nand_sets[] = {
+ [0] = {
+ .name = "NAND",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(smdk_default_nand_part),
+ .partitions = smdk_default_nand_part,
+ },
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+*/
+
+static struct s3c2410_platform_nand smdk_nand_info = {
+ .tacls = 20,
+ .twrph0 = 60,
+ .twrph1 = 20,
+ .nr_sets = ARRAY_SIZE(smdk_nand_sets),
+ .sets = smdk_nand_sets,
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+/* devices we initialise */
+
+static struct platform_device __initdata *smdk_devs[] = {
+ &s3c_device_nand,
+ &smdk_led4,
+ &smdk_led5,
+ &smdk_led6,
+ &smdk_led7,
+};
+
+void __init smdk_machine_init(void)
+{
+ if (machine_is_smdk2443())
+ smdk_nand_info.twrph0 = 50;
+
+ s3c_nand_set_platdata(&smdk_nand_info);
+
+ /* Disable pull-up on the LED lines */
+ s3c_gpio_setpull(S3C2410_GPF(4), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPF(5), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPF(6), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPF(7), S3C_GPIO_PULL_NONE);
+
+ /* Add lookups for the lines */
+ gpiod_add_lookup_table(&smdk_led4_gpio_table);
+ gpiod_add_lookup_table(&smdk_led5_gpio_table);
+ gpiod_add_lookup_table(&smdk_led6_gpio_table);
+ gpiod_add_lookup_table(&smdk_led7_gpio_table);
+
+ platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
+
+ s3c_pm_init();
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Common code for SMDK2410 and SMDK2440 boards
+ *
+ * http://www.fluff.org/ben/smdk2440/
+ */
+
+extern void smdk_machine_init(void);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+// http://www.samsung.com
+//
+// Samsung CPU Support
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <plat/map-base.h>
+#include <plat/cpu.h>
+
+unsigned long samsung_cpu_id;
+
+void __init s3c64xx_init_cpu(void)
+{
+ samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0x118);
+ if (!samsung_cpu_id) {
+ /*
+ * S3C6400 has the ID register in a different place,
+ * and needs a write before it can be read.
+ */
+ writel_relaxed(0x0, S3C_VA_SYS + 0xA1C);
+ samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0xA1C);
+ }
+
+ pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2009 Simtec Electronics
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>
+//
+// S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+
+#include "regs-mem-s3c24xx.h"
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ unsigned long refresh;
+ unsigned long refval;
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * down to ensure that we do not overflow 32 bit numbers.
+ *
+ * This should work for HCLK up to 133MHz and refresh period up
+ * to 30usec.
+ */
+
+ refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+ refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
+ refresh = (1 << 11) + 1 - refresh;
+
+ s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+ refval = __raw_readl(S3C2410_REFRESH);
+ refval &= ~((1 << 12) - 1);
+ refval |= refresh;
+ __raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+ if (!IS_ERR(cfg->mpll))
+ clk_set_rate(cfg->mpll, cfg->pll.frequency);
+}
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+u32 s3c2440_read_camdivn(void)
+{
+ return __raw_readl(S3C2440_CAMDIVN);
+}
+
+void s3c2440_write_camdivn(u32 camdiv)
+{
+ __raw_writel(camdiv, S3C2440_CAMDIVN);
+}
+#endif
+
+u32 s3c24xx_read_clkdivn(void)
+{
+ return __raw_readl(S3C2410_CLKDIVN);
+}
+
+void s3c24xx_write_clkdivn(u32 clkdiv)
+{
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+u32 s3c24xx_read_mpllcon(void)
+{
+ return __raw_readl(S3C2410_MPLLCON);
+}
+
+void s3c24xx_write_locktime(u32 locktime)
+{
+ return __raw_writel(locktime, S3C2410_LOCKTIME);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011 Wolfson Microelectronics, plc
+// Copyright (c) 2011 Samsung Electronics Co., Ltd.
+// http://www.samsung.com
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <linux/export.h>
+#include <linux/time.h>
+
+#include <asm/cpuidle.h>
+
+#include <plat/cpu.h>
+#include <mach/map.h>
+
+#include "regs-sys-s3c64xx.h"
+#include "regs-syscon-power-s3c64xx.h"
+
+static int s3c64xx_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ unsigned long tmp;
+
+ /* Setup PWRCFG to enter idle mode */
+ tmp = __raw_readl(S3C64XX_PWR_CFG);
+ tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+ tmp |= S3C64XX_PWRCFG_CFG_WFI_IDLE;
+ __raw_writel(tmp, S3C64XX_PWR_CFG);
+
+ cpu_do_idle();
+
+ return index;
+}
+
+static struct cpuidle_driver s3c64xx_cpuidle_driver = {
+ .name = "s3c64xx_cpuidle",
+ .owner = THIS_MODULE,
+ .states = {
+ {
+ .enter = s3c64xx_enter_idle,
+ .exit_latency = 1,
+ .target_residency = 1,
+ .name = "IDLE",
+ .desc = "System active, ARM gated",
+ },
+ },
+ .state_count = 1,
+};
+
+static int __init s3c64xx_init_cpuidle(void)
+{
+ if (soc_is_s3c64xx())
+ return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+ return 0;
+}
+device_initcall(s3c64xx_init_cpuidle);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Cragganmore 6410 shared definitions
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ * Mark Brown <broonie@opensource.wolfsonmicro.com>
+ */
+
+#ifndef MACH_CRAG6410_H
+#define MACH_CRAG6410_H
+
+#include <mach/gpio-samsung.h>
+
+#define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START
+#define BANFF_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE GPIO_BOARD_START
+#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 32)
+#define BANFF_PMIC_GPIO_BASE (GPIO_BOARD_START + 64)
+#define MMGPIO_GPIO_BASE (GPIO_BOARD_START + 96)
+
+#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2009 Wolfson Microelectronics
+// Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/export.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <linux/platform_data/asoc-s3c.h>
+#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
+
+static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
+{
+ unsigned int base;
+
+ switch (pdev->id) {
+ case 0:
+ base = S3C64XX_GPD(0);
+ break;
+ case 1:
+ base = S3C64XX_GPE(0);
+ break;
+ case 2:
+ s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
+ return 0;
+ default:
+ printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
+ pdev->id);
+ return -EINVAL;
+ }
+
+ s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
+
+ return 0;
+}
+
+static struct resource s3c64xx_iis0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C64XX_PA_IIS0, SZ_256),
+};
+
+static struct s3c_audio_pdata i2s0_pdata = {
+ .cfg_gpio = s3c64xx_i2s_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis0 = {
+ .name = "samsung-i2s",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c64xx_iis0_resource),
+ .resource = s3c64xx_iis0_resource,
+ .dev = {
+ .platform_data = &i2s0_pdata,
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_iis0);
+
+static struct resource s3c64xx_iis1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C64XX_PA_IIS1, SZ_256),
+};
+
+static struct s3c_audio_pdata i2s1_pdata = {
+ .cfg_gpio = s3c64xx_i2s_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis1 = {
+ .name = "samsung-i2s",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c64xx_iis1_resource),
+ .resource = s3c64xx_iis1_resource,
+ .dev = {
+ .platform_data = &i2s1_pdata,
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_iis1);
+
+static struct resource s3c64xx_iisv4_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C64XX_PA_IISV4, SZ_256),
+};
+
+static struct s3c_audio_pdata i2sv4_pdata = {
+ .cfg_gpio = s3c64xx_i2s_cfg_gpio,
+ .type = {
+ .quirks = QUIRK_PRI_6CHAN,
+ },
+};
+
+struct platform_device s3c64xx_device_iisv4 = {
+ .name = "samsung-i2s",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource),
+ .resource = s3c64xx_iisv4_resource,
+ .dev = {
+ .platform_data = &i2sv4_pdata,
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_iisv4);
+
+
+/* PCM Controller platform_devices */
+
+static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
+{
+ unsigned int base;
+
+ switch (pdev->id) {
+ case 0:
+ base = S3C64XX_GPD(0);
+ break;
+ case 1:
+ base = S3C64XX_GPE(0);
+ break;
+ default:
+ printk(KERN_DEBUG "Invalid PCM Controller number: %d\n",
+ pdev->id);
+ return -EINVAL;
+ }
+
+ s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
+ return 0;
+}
+
+static struct resource s3c64xx_pcm0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C64XX_PA_PCM0, SZ_256),
+};
+
+static struct s3c_audio_pdata s3c_pcm0_pdata = {
+ .cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm0 = {
+ .name = "samsung-pcm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c64xx_pcm0_resource),
+ .resource = s3c64xx_pcm0_resource,
+ .dev = {
+ .platform_data = &s3c_pcm0_pdata,
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm0);
+
+static struct resource s3c64xx_pcm1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C64XX_PA_PCM1, SZ_256),
+};
+
+static struct s3c_audio_pdata s3c_pcm1_pdata = {
+ .cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm1 = {
+ .name = "samsung-pcm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c64xx_pcm1_resource),
+ .resource = s3c64xx_pcm1_resource,
+ .dev = {
+ .platform_data = &s3c_pcm1_pdata,
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm1);
+
+/* AC97 Controller platform devices */
+
+static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
+{
+ return s3c_gpio_cfgpin_range(S3C64XX_GPD(0), 5, S3C_GPIO_SFN(4));
+}
+
+static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
+{
+ return s3c_gpio_cfgpin_range(S3C64XX_GPE(0), 5, S3C_GPIO_SFN(4));
+}
+
+static struct resource s3c64xx_ac97_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C64XX_PA_AC97, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_AC97),
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+};
+
+static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_ac97 = {
+ .name = "samsung-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c64xx_ac97_resource),
+ .resource = s3c64xx_ac97_resource,
+ .dev = {
+ .platform_data = &s3c_ac97_pdata,
+ .dma_mask = &s3c64xx_ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_ac97);
+
+void __init s3c64xx_ac97_setup_gpio(int num)
+{
+ if (num == S3C64XX_AC97_GPD)
+ s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
+ else
+ s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011 Samsung Electronics Co., Ltd.
+// http://www.samsung.com
+//
+// Common infrastructure for PWM Backlight for Samsung boards
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/pwm_backlight.h>
+
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+
+#include "backlight-s3c64xx.h"
+
+struct samsung_bl_drvdata {
+ struct platform_pwm_backlight_data plat_data;
+ struct samsung_bl_gpio_info *gpio_info;
+};
+
+static int samsung_bl_init(struct device *dev)
+{
+ int ret = 0;
+ struct platform_pwm_backlight_data *pdata = dev->platform_data;
+ struct samsung_bl_drvdata *drvdata = container_of(pdata,
+ struct samsung_bl_drvdata, plat_data);
+ struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
+
+ ret = gpio_request(bl_gpio_info->no, "Backlight");
+ if (ret) {
+ printk(KERN_ERR "failed to request GPIO for LCD Backlight\n");
+ return ret;
+ }
+
+ /* Configure GPIO pin with specific GPIO function for PWM timer */
+ s3c_gpio_cfgpin(bl_gpio_info->no, bl_gpio_info->func);
+
+ return 0;
+}
+
+static void samsung_bl_exit(struct device *dev)
+{
+ struct platform_pwm_backlight_data *pdata = dev->platform_data;
+ struct samsung_bl_drvdata *drvdata = container_of(pdata,
+ struct samsung_bl_drvdata, plat_data);
+ struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
+
+ s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT);
+ gpio_free(bl_gpio_info->no);
+}
+
+/* Initialize few important fields of platform_pwm_backlight_data
+ * structure with default values. These fields can be overridden by
+ * board-specific values sent from machine file.
+ * For ease of operation, these fields are initialized with values
+ * used by most samsung boards.
+ * Users has the option of sending info about other parameters
+ * for their specific boards
+ */
+
+static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
+ .plat_data = {
+ .max_brightness = 255,
+ .dft_brightness = 255,
+ .init = samsung_bl_init,
+ .exit = samsung_bl_exit,
+ },
+};
+
+static struct platform_device samsung_dfl_bl_device __initdata = {
+ .name = "pwm-backlight",
+};
+
+/* samsung_bl_set - Set board specific data (if any) provided by user for
+ * PWM Backlight control and register specific PWM and backlight device.
+ * @gpio_info: structure containing GPIO info for PWM timer
+ * @bl_data: structure containing Backlight control data
+ */
+void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
+ struct platform_pwm_backlight_data *bl_data)
+{
+ int ret = 0;
+ struct platform_device *samsung_bl_device;
+ struct samsung_bl_drvdata *samsung_bl_drvdata;
+ struct platform_pwm_backlight_data *samsung_bl_data;
+
+ samsung_bl_device = kmemdup(&samsung_dfl_bl_device,
+ sizeof(struct platform_device), GFP_KERNEL);
+ if (!samsung_bl_device)
+ return;
+
+ samsung_bl_drvdata = kmemdup(&samsung_dfl_bl_data,
+ sizeof(samsung_dfl_bl_data), GFP_KERNEL);
+ if (!samsung_bl_drvdata)
+ goto err_data;
+
+ samsung_bl_device->dev.platform_data = &samsung_bl_drvdata->plat_data;
+ samsung_bl_drvdata->gpio_info = gpio_info;
+ samsung_bl_data = &samsung_bl_drvdata->plat_data;
+
+ /* Copy board specific data provided by user */
+ samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
+
+ if (bl_data->max_brightness)
+ samsung_bl_data->max_brightness = bl_data->max_brightness;
+ if (bl_data->dft_brightness)
+ samsung_bl_data->dft_brightness = bl_data->dft_brightness;
+ if (bl_data->lth_brightness)
+ samsung_bl_data->lth_brightness = bl_data->lth_brightness;
+ if (bl_data->init)
+ samsung_bl_data->init = bl_data->init;
+ if (bl_data->notify)
+ samsung_bl_data->notify = bl_data->notify;
+ if (bl_data->notify_after)
+ samsung_bl_data->notify_after = bl_data->notify_after;
+ if (bl_data->exit)
+ samsung_bl_data->exit = bl_data->exit;
+ if (bl_data->check_fb)
+ samsung_bl_data->check_fb = bl_data->check_fb;
+
+ /* Register the Backlight dev */
+ ret = platform_device_register(samsung_bl_device);
+ if (ret) {
+ printk(KERN_ERR "failed to register backlight device: %d\n", ret);
+ goto err_plat_reg2;
+ }
+
+ return;
+
+err_plat_reg2:
+ kfree(samsung_bl_data);
+err_data:
+ kfree(samsung_bl_device);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// Base S3C64XX UART resource and device definitions
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s3c64xx_uart0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_UART0, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_UART0),
+};
+
+static struct resource s3c64xx_uart1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_UART1, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_UART1),
+};
+
+static struct resource s3c6xx_uart2_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_UART2, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_UART2),
+};
+
+static struct resource s3c64xx_uart3_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_UART3, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_UART3),
+};
+
+
+struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
+ [0] = {
+ .resources = s3c64xx_uart0_resource,
+ .nr_resources = ARRAY_SIZE(s3c64xx_uart0_resource),
+ },
+ [1] = {
+ .resources = s3c64xx_uart1_resource,
+ .nr_resources = ARRAY_SIZE(s3c64xx_uart1_resource),
+ },
+ [2] = {
+ .resources = s3c6xx_uart2_resource,
+ .nr_resources = ARRAY_SIZE(s3c6xx_uart2_resource),
+ },
+ [3] = {
+ .resources = s3c64xx_uart3_resource,
+ .nr_resources = ARRAY_SIZE(s3c64xx_uart3_resource),
+ },
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// originally from arch/arm/plat-s3c24xx/devs.c
+//
+// Copyright (c) 2004 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// Base S3C24XX platform device definitions
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+ .id = 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+ .id = 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+ .id = 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+ .id = 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+ &s3c24xx_uart_device0,
+ &s3c24xx_uart_device1,
+ &s3c24xx_uart_device2,
+ &s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011 Samsung Electronics Co., Ltd.
+// http://www.samsung.com
+//
+// Base Samsung platform device definitions
+
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/fb.h>
+#include <linux/gfp.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mmc/host.h>
+#include <linux/ioport.h>
+#include <linux/sizes.h>
+#include <linux/platform_data/s3c-hsudc.h>
+#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/dma-s3c24xx.h>
+
+#include <linux/platform_data/media/s5p_hdmi.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/gpio-samsung.h>
+
+#ifdef CONFIG_PLAT_S3C24XX
+#include <mach/regs-s3c2443-clock.h>
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <linux/soc/samsung/s3c-adc.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <plat/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/keypad.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <plat/pwm-core.h>
+#include <plat/sdhci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include <plat/usb-phy.h>
+#include <linux/platform_data/asoc-s3c.h>
+#include <linux/platform_data/spi-s3c64xx.h>
+
+#define samsung_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
+
+/* AC97 */
+#ifdef CONFIG_CPU_S3C2440
+static struct resource s3c_ac97_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97),
+ [1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
+};
+
+struct platform_device s3c_device_ac97 = {
+ .name = "samsung-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_ac97_resource),
+ .resource = s3c_ac97_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* ADC */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_adc_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
+ [1] = DEFINE_RES_IRQ(IRQ_TC),
+ [2] = DEFINE_RES_IRQ(IRQ_ADC),
+};
+
+struct platform_device s3c_device_adc = {
+ .name = "s3c24xx-adc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_adc_resource),
+ .resource = s3c_adc_resource,
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#if defined(CONFIG_SAMSUNG_DEV_ADC)
+static struct resource s3c_adc_resource[] = {
+ [0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_ADC),
+ [2] = DEFINE_RES_IRQ(IRQ_TC),
+};
+
+struct platform_device s3c_device_adc = {
+ .name = "exynos-adc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_adc_resource),
+ .resource = s3c_adc_resource,
+};
+#endif /* CONFIG_SAMSUNG_DEV_ADC */
+
+/* Camif Controller */
+
+#ifdef CONFIG_CPU_S3C2440
+static struct resource s3c_camif_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
+ [1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C),
+ [2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P),
+};
+
+struct platform_device s3c_device_camif = {
+ .name = "s3c2440-camif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_camif_resource),
+ .resource = s3c_camif_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* FB */
+
+#ifdef CONFIG_S3C_DEV_FB
+static struct resource s3c_fb_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_FB, SZ_16K),
+ [1] = DEFINE_RES_IRQ(IRQ_LCD_VSYNC),
+ [2] = DEFINE_RES_IRQ(IRQ_LCD_FIFO),
+ [3] = DEFINE_RES_IRQ(IRQ_LCD_SYSTEM),
+};
+
+struct platform_device s3c_device_fb = {
+ .name = "s3c-fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_fb_resource),
+ .resource = s3c_fb_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
+{
+ s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
+ &s3c_device_fb);
+}
+#endif /* CONFIG_S3C_DEV_FB */
+
+/* HWMON */
+
+#ifdef CONFIG_S3C_DEV_HWMON
+struct platform_device s3c_device_hwmon = {
+ .name = "s3c-hwmon",
+ .id = -1,
+ .dev.parent = &s3c_device_adc.dev,
+};
+
+void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
+{
+ s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata),
+ &s3c_device_hwmon);
+}
+#endif /* CONFIG_S3C_DEV_HWMON */
+
+/* HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static struct resource s3c_hsmmc_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_HSMMC0, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_HSMMC0),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
+ .max_width = 4,
+ .host_caps = (MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc0 = {
+ .name = "s3c-sdhci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_hsmmc_resource),
+ .resource = s3c_hsmmc_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c_hsmmc0_def_platdata,
+ },
+};
+
+void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static struct resource s3c_hsmmc1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_HSMMC1, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_HSMMC1),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
+ .max_width = 4,
+ .host_caps = (MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc1 = {
+ .name = "s3c-sdhci",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c_hsmmc1_resource),
+ .resource = s3c_hsmmc1_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c_hsmmc1_def_platdata,
+ },
+};
+
+void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+/* HSMMC2 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static struct resource s3c_hsmmc2_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_HSMMC2, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_HSMMC2),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
+ .max_width = 4,
+ .host_caps = (MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc2 = {
+ .name = "s3c-sdhci",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s3c_hsmmc2_resource),
+ .resource = s3c_hsmmc2_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c_hsmmc2_def_platdata,
+ },
+};
+
+void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC3
+static struct resource s3c_hsmmc3_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_HSMMC3, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_HSMMC3),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
+ .max_width = 4,
+ .host_caps = (MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc3 = {
+ .name = "s3c-sdhci",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource),
+ .resource = s3c_hsmmc3_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c_hsmmc3_def_platdata,
+ },
+};
+
+void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC3 */
+
+/* I2C */
+
+static struct resource s3c_i2c0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC),
+};
+
+struct platform_device s3c_device_i2c0 = {
+ .name = "s3c2410-i2c",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_i2c0_resource),
+ .resource = s3c_i2c0_resource,
+};
+
+struct s3c2410_platform_i2c default_i2c_data __initdata = {
+ .flags = 0,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+};
+
+void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 0;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c0);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c0_cfg_gpio;
+}
+
+#ifdef CONFIG_S3C_DEV_I2C1
+static struct resource s3c_i2c1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC1, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC1),
+};
+
+struct platform_device s3c_device_i2c1 = {
+ .name = "s3c2410-i2c",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c_i2c1_resource),
+ .resource = s3c_i2c1_resource,
+};
+
+void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 1;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c1);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c1_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C1 */
+
+#ifdef CONFIG_S3C_DEV_I2C2
+static struct resource s3c_i2c2_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC2, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC2),
+};
+
+struct platform_device s3c_device_i2c2 = {
+ .name = "s3c2410-i2c",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s3c_i2c2_resource),
+ .resource = s3c_i2c2_resource,
+};
+
+void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 2;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c2);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c2_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C2 */
+
+#ifdef CONFIG_S3C_DEV_I2C3
+static struct resource s3c_i2c3_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC3, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC3),
+};
+
+struct platform_device s3c_device_i2c3 = {
+ .name = "s3c2440-i2c",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(s3c_i2c3_resource),
+ .resource = s3c_i2c3_resource,
+};
+
+void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 3;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c3);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c3_cfg_gpio;
+}
+#endif /*CONFIG_S3C_DEV_I2C3 */
+
+#ifdef CONFIG_S3C_DEV_I2C4
+static struct resource s3c_i2c4_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC4, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC4),
+};
+
+struct platform_device s3c_device_i2c4 = {
+ .name = "s3c2440-i2c",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(s3c_i2c4_resource),
+ .resource = s3c_i2c4_resource,
+};
+
+void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 4;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c4);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c4_cfg_gpio;
+}
+#endif /*CONFIG_S3C_DEV_I2C4 */
+
+#ifdef CONFIG_S3C_DEV_I2C5
+static struct resource s3c_i2c5_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC5, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC5),
+};
+
+struct platform_device s3c_device_i2c5 = {
+ .name = "s3c2440-i2c",
+ .id = 5,
+ .num_resources = ARRAY_SIZE(s3c_i2c5_resource),
+ .resource = s3c_i2c5_resource,
+};
+
+void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 5;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c5);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c5_cfg_gpio;
+}
+#endif /*CONFIG_S3C_DEV_I2C5 */
+
+#ifdef CONFIG_S3C_DEV_I2C6
+static struct resource s3c_i2c6_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC6, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC6),
+};
+
+struct platform_device s3c_device_i2c6 = {
+ .name = "s3c2440-i2c",
+ .id = 6,
+ .num_resources = ARRAY_SIZE(s3c_i2c6_resource),
+ .resource = s3c_i2c6_resource,
+};
+
+void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 6;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c6);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c6_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C6 */
+
+#ifdef CONFIG_S3C_DEV_I2C7
+static struct resource s3c_i2c7_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC7, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC7),
+};
+
+struct platform_device s3c_device_i2c7 = {
+ .name = "s3c2440-i2c",
+ .id = 7,
+ .num_resources = ARRAY_SIZE(s3c_i2c7_resource),
+ .resource = s3c_i2c7_resource,
+};
+
+void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 7;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c7);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c7_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C7 */
+
+/* I2S */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_iis_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
+};
+
+struct platform_device s3c_device_iis = {
+ .name = "s3c24xx-iis",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_iis_resource),
+ .resource = s3c_iis_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* IDE CFCON */
+
+#ifdef CONFIG_SAMSUNG_DEV_IDE
+static struct resource s3c_cfcon_resource[] = {
+ [0] = DEFINE_RES_MEM(SAMSUNG_PA_CFCON, SZ_16K),
+ [1] = DEFINE_RES_IRQ(IRQ_CFCON),
+};
+
+struct platform_device s3c_device_cfcon = {
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_cfcon_resource),
+ .resource = s3c_cfcon_resource,
+};
+
+void __init s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
+{
+ s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
+ &s3c_device_cfcon);
+}
+#endif /* CONFIG_SAMSUNG_DEV_IDE */
+
+/* KEYPAD */
+
+#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
+static struct resource samsung_keypad_resources[] = {
+ [0] = DEFINE_RES_MEM(SAMSUNG_PA_KEYPAD, SZ_32),
+ [1] = DEFINE_RES_IRQ(IRQ_KEYPAD),
+};
+
+struct platform_device samsung_device_keypad = {
+ .name = "samsung-keypad",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(samsung_keypad_resources),
+ .resource = samsung_keypad_resources,
+};
+
+void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
+{
+ struct samsung_keypad_platdata *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(*npd), &samsung_device_keypad);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = samsung_keypad_cfg_gpio;
+}
+#endif /* CONFIG_SAMSUNG_DEV_KEYPAD */
+
+/* LCD Controller */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_lcd_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_LCD, S3C24XX_SZ_LCD),
+ [1] = DEFINE_RES_IRQ(IRQ_LCD),
+};
+
+struct platform_device s3c_device_lcd = {
+ .name = "s3c2410-lcd",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_lcd_resource),
+ .resource = s3c_lcd_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
+{
+ struct s3c2410fb_mach_info *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
+ if (npd) {
+ npd->displays = kmemdup(pd->displays,
+ sizeof(struct s3c2410fb_display) * npd->num_displays,
+ GFP_KERNEL);
+ if (!npd->displays)
+ printk(KERN_ERR "no memory for LCD display data\n");
+ } else {
+ printk(KERN_ERR "no memory for LCD platform data\n");
+ }
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* NAND */
+
+#ifdef CONFIG_S3C_DEV_NAND
+static struct resource s3c_nand_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_NAND, SZ_1M),
+};
+
+struct platform_device s3c_device_nand = {
+ .name = "s3c2410-nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_nand_resource),
+ .resource = s3c_nand_resource,
+};
+
+/*
+ * s3c_nand_copy_set() - copy nand set data
+ * @set: The new structure, directly copied from the old.
+ *
+ * Copy all the fields from the NAND set field from what is probably __initdata
+ * to new kernel memory. The code returns 0 if the copy happened correctly or
+ * an error code for the calling function to display.
+ *
+ * Note, we currently do not try and look to see if we've already copied the
+ * data in a previous set.
+ */
+static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
+{
+ void *ptr;
+ int size;
+
+ size = sizeof(struct mtd_partition) * set->nr_partitions;
+ if (size) {
+ ptr = kmemdup(set->partitions, size, GFP_KERNEL);
+ set->partitions = ptr;
+
+ if (!ptr)
+ return -ENOMEM;
+ }
+
+ if (set->nr_map && set->nr_chips) {
+ size = sizeof(int) * set->nr_chips;
+ ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
+ set->nr_map = ptr;
+
+ if (!ptr)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
+{
+ struct s3c2410_platform_nand *npd;
+ int size;
+ int ret;
+
+ /* note, if we get a failure in allocation, we simply drop out of the
+ * function. If there is so little memory available at initialisation
+ * time then there is little chance the system is going to run.
+ */
+
+ npd = s3c_set_platdata(nand, sizeof(*npd), &s3c_device_nand);
+ if (!npd)
+ return;
+
+ /* now see if we need to copy any of the nand set data */
+
+ size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
+ if (size) {
+ struct s3c2410_nand_set *from = npd->sets;
+ struct s3c2410_nand_set *to;
+ int i;
+
+ to = kmemdup(from, size, GFP_KERNEL);
+ npd->sets = to; /* set, even if we failed */
+
+ if (!to) {
+ printk(KERN_ERR "%s: no memory for sets\n", __func__);
+ return;
+ }
+
+ for (i = 0; i < npd->nr_sets; i++) {
+ ret = s3c_nand_copy_set(to);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to copy set %d\n",
+ __func__, i);
+ return;
+ }
+ to++;
+ }
+ }
+}
+#endif /* CONFIG_S3C_DEV_NAND */
+
+/* ONENAND */
+
+#ifdef CONFIG_S3C_DEV_ONENAND
+static struct resource s3c_onenand_resources[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_ONENAND, SZ_1K),
+ [1] = DEFINE_RES_MEM(S3C_PA_ONENAND_BUF, S3C_SZ_ONENAND_BUF),
+ [2] = DEFINE_RES_IRQ(IRQ_ONENAND),
+};
+
+struct platform_device s3c_device_onenand = {
+ .name = "samsung-onenand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_onenand_resources),
+ .resource = s3c_onenand_resources,
+};
+#endif /* CONFIG_S3C_DEV_ONENAND */
+
+#ifdef CONFIG_S3C64XX_DEV_ONENAND1
+static struct resource s3c64xx_onenand1_resources[] = {
+ [0] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1, SZ_1K),
+ [1] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1_BUF, S3C64XX_SZ_ONENAND1_BUF),
+ [2] = DEFINE_RES_IRQ(IRQ_ONENAND1),
+};
+
+struct platform_device s3c64xx_device_onenand1 = {
+ .name = "samsung-onenand",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c64xx_onenand1_resources),
+ .resource = s3c64xx_onenand1_resources,
+};
+
+void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
+{
+ s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
+ &s3c64xx_device_onenand1);
+}
+#endif /* CONFIG_S3C64XX_DEV_ONENAND1 */
+
+/* PWM Timer */
+
+#ifdef CONFIG_SAMSUNG_DEV_PWM
+static struct resource samsung_pwm_resource[] = {
+ DEFINE_RES_MEM(SAMSUNG_PA_TIMER, SZ_4K),
+};
+
+struct platform_device samsung_device_pwm = {
+ .name = "samsung-pwm",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(samsung_pwm_resource),
+ .resource = samsung_pwm_resource,
+};
+
+void __init samsung_pwm_set_platdata(struct samsung_pwm_variant *pd)
+{
+ samsung_device_pwm.dev.platform_data = pd;
+}
+#endif /* CONFIG_SAMSUNG_DEV_PWM */
+
+/* RTC */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_rtc_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_RTC, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_RTC),
+ [2] = DEFINE_RES_IRQ(IRQ_TICK),
+};
+
+struct platform_device s3c_device_rtc = {
+ .name = "s3c2410-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_rtc_resource),
+ .resource = s3c_rtc_resource,
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#ifdef CONFIG_S3C_DEV_RTC
+static struct resource s3c_rtc_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_RTC, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_RTC_ALARM),
+ [2] = DEFINE_RES_IRQ(IRQ_RTC_TIC),
+};
+
+struct platform_device s3c_device_rtc = {
+ .name = "s3c64xx-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_rtc_resource),
+ .resource = s3c_rtc_resource,
+};
+#endif /* CONFIG_S3C_DEV_RTC */
+
+/* SDI */
+
+#ifdef CONFIG_PLAT_S3C24XX
+void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd)
+{
+ switch (power_mode) {
+ case MMC_POWER_ON:
+ case MMC_POWER_UP:
+ /* Configure GPE5...GPE10 pins in SD mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+ break;
+
+ case MMC_POWER_OFF:
+ default:
+ gpio_direction_output(S3C2410_GPE(5), 0);
+ break;
+ }
+}
+
+static struct resource s3c_sdi_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
+ [1] = DEFINE_RES_IRQ(IRQ_SDI),
+};
+
+static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
+ /* This is currently here to avoid a number of if (host->pdata)
+ * checks. Any zero fields to ensure reasonable defaults are picked. */
+ .no_wprotect = 1,
+ .no_detect = 1,
+ .set_power = s3c24xx_mci_def_set_power,
+};
+
+struct platform_device s3c_device_sdi = {
+ .name = "s3c2410-sdi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_sdi_resource),
+ .resource = s3c_sdi_resource,
+ .dev.platform_data = &s3cmci_def_pdata,
+};
+
+void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
+{
+ s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
+ &s3c_device_sdi);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* SPI */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_spi0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_SPI, SZ_32),
+ [1] = DEFINE_RES_IRQ(IRQ_SPI0),
+};
+
+struct platform_device s3c_device_spi0 = {
+ .name = "s3c2410-spi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_spi0_resource),
+ .resource = s3c_spi0_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+static struct resource s3c_spi1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_SPI1, SZ_32),
+ [1] = DEFINE_RES_IRQ(IRQ_SPI1),
+};
+
+struct platform_device s3c_device_spi1 = {
+ .name = "s3c2410-spi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c_spi1_resource),
+ .resource = s3c_spi1_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* Touchscreen */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_ts_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
+ [1] = DEFINE_RES_IRQ(IRQ_TC),
+};
+
+struct platform_device s3c_device_ts = {
+ .name = "s3c2410-ts",
+ .id = -1,
+ .dev.parent = &s3c_device_adc.dev,
+ .num_resources = ARRAY_SIZE(s3c_ts_resource),
+ .resource = s3c_ts_resource,
+};
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
+{
+ s3c_set_platdata(hard_s3c2410ts_info,
+ sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#ifdef CONFIG_SAMSUNG_DEV_TS
+static struct s3c2410_ts_mach_info default_ts_data __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
+};
+
+void __init s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
+{
+ if (!pd)
+ pd = &default_ts_data;
+
+ s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
+ &s3c_device_adc);
+}
+#endif /* CONFIG_SAMSUNG_DEV_TS */
+
+/* USB */
+
+#ifdef CONFIG_S3C_DEV_USB_HOST
+static struct resource s3c_usb_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_USBHOST, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_USBH),
+};
+
+struct platform_device s3c_device_ohci = {
+ .name = "s3c2410-ohci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_usb_resource),
+ .resource = s3c_usb_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+/*
+ * s3c_ohci_set_platdata - initialise OHCI device platform data
+ * @info: The platform data.
+ *
+ * This call copies the @info passed in and sets the device .platform_data
+ * field to that copy. The @info is copied so that the original can be marked
+ * __initdata.
+ */
+
+void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
+{
+ s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info),
+ &s3c_device_ohci);
+}
+#endif /* CONFIG_S3C_DEV_USB_HOST */
+
+/* USB Device (Gadget) */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_usbgadget_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_USBDEV, S3C24XX_SZ_USBDEV),
+ [1] = DEFINE_RES_IRQ(IRQ_USBD),
+};
+
+struct platform_device s3c_device_usbgadget = {
+ .name = "s3c2410-usbgadget",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_usbgadget_resource),
+ .resource = s3c_usbgadget_resource,
+};
+
+void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
+{
+ s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* USB HSOTG */
+
+#ifdef CONFIG_S3C_DEV_USB_HSOTG
+static struct resource s3c_usb_hsotg_resources[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
+ [1] = DEFINE_RES_IRQ(IRQ_OTG),
+};
+
+struct platform_device s3c_device_usb_hsotg = {
+ .name = "s3c-hsotg",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources),
+ .resource = s3c_usb_hsotg_resources,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd)
+{
+ struct dwc2_hsotg_plat *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_usb_hsotg);
+
+ if (!npd->phy_init)
+ npd->phy_init = s3c_usb_phy_init;
+ if (!npd->phy_exit)
+ npd->phy_exit = s3c_usb_phy_exit;
+}
+#endif /* CONFIG_S3C_DEV_USB_HSOTG */
+
+/* USB High Spped 2.0 Device (Gadget) */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_hsudc_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2416_PA_HSUDC, S3C2416_SZ_HSUDC),
+ [1] = DEFINE_RES_IRQ(IRQ_USBD),
+};
+
+struct platform_device s3c_device_usb_hsudc = {
+ .name = "s3c-hsudc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_hsudc_resource),
+ .resource = s3c_hsudc_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
+{
+ s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
+ pd->phy_init = s3c_hsudc_init_phy;
+ pd->phy_uninit = s3c_hsudc_uninit_phy;
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* WDT */
+
+#ifdef CONFIG_S3C_DEV_WDT
+static struct resource s3c_wdt_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_WDT, SZ_1K),
+ [1] = DEFINE_RES_IRQ(IRQ_WDT),
+};
+
+struct platform_device s3c_device_wdt = {
+ .name = "s3c2410-wdt",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_wdt_resource),
+ .resource = s3c_wdt_resource,
+};
+#endif /* CONFIG_S3C_DEV_WDT */
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+static struct resource s3c64xx_spi0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_SPI0),
+};
+
+struct platform_device s3c64xx_device_spi0 = {
+ .name = "s3c6410-spi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource),
+ .resource = s3c64xx_spi0_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+ int num_cs)
+{
+ struct s3c64xx_spi_info pd;
+
+ /* Reject invalid configuration */
+ if (!num_cs || src_clk_nr < 0) {
+ pr_err("%s: Invalid SPI configuration\n", __func__);
+ return;
+ }
+
+ pd.num_cs = num_cs;
+ pd.src_clk_nr = src_clk_nr;
+ pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
+
+ s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
+}
+#endif /* CONFIG_S3C64XX_DEV_SPI0 */
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+static struct resource s3c64xx_spi1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_SPI1),
+};
+
+struct platform_device s3c64xx_device_spi1 = {
+ .name = "s3c6410-spi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource),
+ .resource = s3c64xx_spi1_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+ int num_cs)
+{
+ struct s3c64xx_spi_info pd;
+
+ /* Reject invalid configuration */
+ if (!num_cs || src_clk_nr < 0) {
+ pr_err("%s: Invalid SPI configuration\n", __func__);
+ return;
+ }
+
+ pd.num_cs = num_cs;
+ pd.src_clk_nr = src_clk_nr;
+ pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
+
+ s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
+}
+#endif /* CONFIG_S3C64XX_DEV_SPI1 */
+
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+static struct resource s3c64xx_spi2_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_SPI2),
+};
+
+struct platform_device s3c64xx_device_spi2 = {
+ .name = "s3c6410-spi",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s3c64xx_spi2_resource),
+ .resource = s3c64xx_spi2_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+ int num_cs)
+{
+ struct s3c64xx_spi_info pd;
+
+ /* Reject invalid configuration */
+ if (!num_cs || src_clk_nr < 0) {
+ pr_err("%s: Invalid SPI configuration\n", __func__);
+ return;
+ }
+
+ pd.num_cs = num_cs;
+ pd.src_clk_nr = src_clk_nr;
+ pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
+
+ s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);
+}
+#endif /* CONFIG_S3C64XX_DEV_SPI2 */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ * Pawel Osciak <p.osciak@samsung.com>
+ *
+ * Samsung framebuffer driver core functions
+ */
+#ifndef __ASM_PLAT_FB_CORE_S3C24XX_H
+#define __ASM_PLAT_FB_CORE_S3C24XX_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name depending on support. */
+static inline void s3c_fb_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_FB
+ s3c_device_fb.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_FB_CORE_S3C24XX_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+// http://www.samsung.com/
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// Samsung - GPIOlib support
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+
+#include <asm/irq.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/cpu.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/pm.h>
+
+int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ void __iomem *reg = chip->base + 0x08;
+ int shift = off * 2;
+ u32 pup;
+
+ pup = __raw_readl(reg);
+ pup &= ~(3 << shift);
+ pup |= pull << shift;
+ __raw_writel(pup, reg);
+
+ return 0;
+}
+
+samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ void __iomem *reg = chip->base + 0x08;
+ int shift = off * 2;
+ u32 pup = __raw_readl(reg);
+
+ pup >>= shift;
+ pup &= 0x3;
+
+ return (__force samsung_gpio_pull_t)pup;
+}
+
+int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ switch (pull) {
+ case S3C_GPIO_PULL_NONE:
+ pull = 0x01;
+ break;
+ case S3C_GPIO_PULL_UP:
+ pull = 0x00;
+ break;
+ case S3C_GPIO_PULL_DOWN:
+ pull = 0x02;
+ break;
+ }
+ return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ samsung_gpio_pull_t pull;
+
+ pull = samsung_gpio_getpull_updown(chip, off);
+
+ switch (pull) {
+ case 0x00:
+ pull = S3C_GPIO_PULL_UP;
+ break;
+ case 0x01:
+ case 0x03:
+ pull = S3C_GPIO_PULL_NONE;
+ break;
+ case 0x02:
+ pull = S3C_GPIO_PULL_DOWN;
+ break;
+ }
+
+ return pull;
+}
+
+static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull,
+ samsung_gpio_pull_t updown)
+{
+ void __iomem *reg = chip->base + 0x08;
+ u32 pup = __raw_readl(reg);
+
+ if (pull == updown)
+ pup &= ~(1 << off);
+ else if (pull == S3C_GPIO_PULL_NONE)
+ pup |= (1 << off);
+ else
+ return -EINVAL;
+
+ __raw_writel(pup, reg);
+ return 0;
+}
+
+static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
+ unsigned int off,
+ samsung_gpio_pull_t updown)
+{
+ void __iomem *reg = chip->base + 0x08;
+ u32 pup = __raw_readl(reg);
+
+ pup &= (1 << off);
+ return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+
+/*
+ * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ * 00 = input
+ * 01 = output
+ * 1x = special function
+ */
+
+static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = off * 2;
+ u32 con;
+
+ if (samsung_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+ if (cfg > 3)
+ return -EINVAL;
+
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0x3 << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_2bit(). Will return a value which
+ * could be directly passed back to samsung_gpio_setcfg_2bit(), from the
+ * S3C_GPIO_SPECIAL() macro.
+ */
+
+static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ u32 con;
+
+ con = __raw_readl(chip->base);
+ con >>= off * 2;
+ con &= 3;
+
+ /* this conversion works for IN and OUT as well as special mode */
+ return S3C_GPIO_SPECIAL(con);
+}
+
+/*
+ * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of functions for
+ * each case.
+ */
+
+static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = (off & 7) * 4;
+ u32 con;
+
+ if (off < 8 && chip->chip.ngpio > 8)
+ reg -= 4;
+
+ if (samsung_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0xf << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration
+ * register setting into a value the software can use, such as could be passed
+ * to samsung_gpio_setcfg_4bit().
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ */
+
+static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = (off & 7) * 4;
+ u32 con;
+
+ if (off < 8 && chip->chip.ngpio > 8)
+ reg -= 4;
+
+ con = __raw_readl(reg);
+ con >>= shift;
+ con &= 0xf;
+
+ /* this conversion works for IN and OUT as well as special mode */
+ return S3C_GPIO_SPECIAL(con);
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/*
+ * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+ */
+
+static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = off;
+ u32 con;
+
+ if (samsung_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+
+ /* Map output to 0, and SFN2 to 1 */
+ cfg -= 1;
+ if (cfg > 1)
+ return -EINVAL;
+
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0x1 << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+/*
+ * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
+ * GPIO configuration value.
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ * @sa samsung_gpio_getcfg_4bit
+ */
+
+static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ u32 con;
+
+ con = __raw_readl(chip->base);
+ con >>= off;
+ con &= 1;
+ con++;
+
+ return S3C_GPIO_SFN(con);
+}
+#endif
+
+static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chipcfg++) {
+ if (!chipcfg->set_config)
+ chipcfg->set_config = samsung_gpio_setcfg_4bit;
+ if (!chipcfg->get_config)
+ chipcfg->get_config = samsung_gpio_getcfg_4bit;
+ if (!chipcfg->set_pull)
+ chipcfg->set_pull = samsung_gpio_setpull_updown;
+ if (!chipcfg->get_pull)
+ chipcfg->get_pull = samsung_gpio_getpull_updown;
+ }
+}
+
+struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+};
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
+ .set_config = s3c24xx_gpio_setcfg_abank,
+ .get_config = s3c24xx_gpio_getcfg_abank,
+};
+#endif
+
+static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
+ [0] = {
+ .cfg_eint = 0x0,
+ },
+ [1] = {
+ .cfg_eint = 0x3,
+ },
+ [2] = {
+ .cfg_eint = 0x7,
+ },
+ [3] = {
+ .cfg_eint = 0xF,
+ },
+ [4] = {
+ .cfg_eint = 0x0,
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+ },
+ [5] = {
+ .cfg_eint = 0x2,
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+ },
+ [6] = {
+ .cfg_eint = 0x3,
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+ },
+ [7] = {
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+ },
+};
+
+/*
+ * Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ * gpio n: 2 bits starting at (2*n)
+ * 00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ * bit n: data bit n
+*/
+
+static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long con;
+
+ samsung_gpio_lock(ourchip, flags);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~(3 << (offset * 2));
+
+ __raw_writel(con, base + 0x00);
+
+ samsung_gpio_unlock(ourchip, flags);
+ return 0;
+}
+
+static int samsung_gpiolib_2bit_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+ unsigned long con;
+
+ samsung_gpio_lock(ourchip, flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+ __raw_writel(dat, base + 0x04);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~(3 << (offset * 2));
+ con |= 1 << (offset * 2);
+
+ __raw_writel(con, base + 0x00);
+ __raw_writel(dat, base + 0x04);
+
+ samsung_gpio_unlock(ourchip, flags);
+ return 0;
+}
+
+/*
+ * The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the
+ * state of the output.
+ */
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+
+ con = __raw_readl(base + GPIOCON_OFF);
+ if (ourchip->bitmap_gpio_int & BIT(offset))
+ con |= 0xf << con_4bit_shift(offset);
+ else
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, base + GPIOCON_OFF);
+
+ pr_debug("%s: %p: CON now %08lx\n", __func__, base, con);
+
+ return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+ unsigned long dat;
+
+ con = __raw_readl(base + GPIOCON_OFF);
+ con &= ~(0xf << con_4bit_shift(offset));
+ con |= 0x1 << con_4bit_shift(offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + GPIODAT_OFF);
+ __raw_writel(con, base + GPIOCON_OFF);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+/*
+ * The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set
+ * routines we store the 'base + 0x4' address so that these routines see
+ * the data register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+
+ if (offset > 7)
+ offset -= 8;
+ else
+ regcon -= 4;
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, regcon);
+
+ pr_debug("%s: %p: CON %08lx\n", __func__, base, con);
+
+ return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+ unsigned long dat;
+ unsigned con_offset = offset;
+
+ if (con_offset > 7)
+ con_offset -= 8;
+ else
+ regcon -= 4;
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(con_offset));
+ con |= 0x1 << con_4bit_shift(con_offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + GPIODAT_OFF);
+ __raw_writel(con, regcon);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/* The next set of routines are for the case of s3c24xx bank a */
+
+static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
+{
+ return -EINVAL;
+}
+
+static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+ unsigned long con;
+
+ local_irq_save(flags);
+
+ con = __raw_readl(base + 0x00);
+ dat = __raw_readl(base + 0x04);
+
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+
+ __raw_writel(dat, base + 0x04);
+
+ con &= ~(1 << offset);
+
+ __raw_writel(con, base + 0x00);
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+ return 0;
+}
+#endif
+
+static void samsung_gpiolib_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+
+ samsung_gpio_lock(ourchip, flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+ __raw_writel(dat, base + 0x04);
+
+ samsung_gpio_unlock(ourchip, flags);
+}
+
+static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ unsigned long val;
+
+ val = __raw_readl(ourchip->base + 0x04);
+ val >>= offset;
+ val &= 1;
+
+ return val;
+}
+
+/*
+ * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to samsung_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own samsung_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip)
+{
+ unsigned int gpn;
+ int i;
+
+ gpn = chip->chip.base;
+ for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+ BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
+ s3c_gpios[gpn] = chip;
+ }
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/*
+ * samsung_gpiolib_add() - add the Samsung gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+
+static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
+{
+ struct gpio_chip *gc = &chip->chip;
+ int ret;
+
+ BUG_ON(!chip->base);
+ BUG_ON(!gc->label);
+ BUG_ON(!gc->ngpio);
+
+ spin_lock_init(&chip->lock);
+
+ if (!gc->direction_input)
+ gc->direction_input = samsung_gpiolib_2bit_input;
+ if (!gc->direction_output)
+ gc->direction_output = samsung_gpiolib_2bit_output;
+ if (!gc->set)
+ gc->set = samsung_gpiolib_set;
+ if (!gc->get)
+ gc->get = samsung_gpiolib_get;
+
+#ifdef CONFIG_PM
+ if (chip->pm != NULL) {
+ if (!chip->pm->save || !chip->pm->resume)
+ pr_err("gpio: %s has missing PM functions\n",
+ gc->label);
+ } else
+ pr_err("gpio: %s has no PM function\n", gc->label);
+#endif
+
+ /* gpiochip_add() prints own failure message on error. */
+ ret = gpiochip_add_data(gc, chip);
+ if (ret >= 0)
+ s3c_gpiolib_track(chip);
+}
+
+static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
+ int nr_chips, void __iomem *base)
+{
+ int i;
+ struct gpio_chip *gc = &chip->chip;
+
+ for (i = 0 ; i < nr_chips; i++, chip++) {
+ /* skip banks not present on SoC */
+ if (chip->chip.base >= S3C_GPIO_END)
+ continue;
+
+ if (!chip->config)
+ chip->config = &s3c24xx_gpiocfg_default;
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+ if ((base != NULL) && (chip->base == NULL))
+ chip->base = base + ((i) * 0x10);
+
+ if (!gc->direction_input)
+ gc->direction_input = samsung_gpiolib_2bit_input;
+ if (!gc->direction_output)
+ gc->direction_output = samsung_gpiolib_2bit_output;
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
+ int nr_chips, void __iomem *base,
+ unsigned int offset)
+{
+ int i;
+
+ for (i = 0 ; i < nr_chips; i++, chip++) {
+ chip->chip.direction_input = samsung_gpiolib_2bit_input;
+ chip->chip.direction_output = samsung_gpiolib_2bit_output;
+
+ if (!chip->config)
+ chip->config = &samsung_gpio_cfgs[7];
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+ if ((base != NULL) && (chip->base == NULL))
+ chip->base = base + ((i) * offset);
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+/*
+ * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of function
+ * (samsung_gpiolib_add_4bit2_chips)for each case.
+ */
+
+static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip,
+ int nr_chips, void __iomem *base)
+{
+ int i;
+
+ for (i = 0 ; i < nr_chips; i++, chip++) {
+ chip->chip.direction_input = samsung_gpiolib_4bit_input;
+ chip->chip.direction_output = samsung_gpiolib_4bit_output;
+
+ if (!chip->config)
+ chip->config = &samsung_gpio_cfgs[2];
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+ if ((base != NULL) && (chip->base == NULL))
+ chip->base = base + ((i) * 0x20);
+
+ chip->bitmap_gpio_int = 0;
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chip++) {
+ chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+ chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+
+ if (!chip->config)
+ chip->config = &samsung_gpio_cfgs[2];
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ struct samsung_gpio_chip *samsung_chip = gpiochip_get_data(chip);
+
+ return samsung_chip->irq_base + offset;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ if (offset < 4) {
+ if (soc_is_s3c2412())
+ return IRQ_EINT0_2412 + offset;
+ else
+ return IRQ_EINT0 + offset;
+ }
+
+ if (offset < 8)
+ return IRQ_EINT4 + offset - 4;
+
+ return -EINVAL;
+}
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+ return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
+static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+ return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+#endif
+
+struct samsung_gpio_chip s3c24xx_gpios[] = {
+#ifdef CONFIG_PLAT_S3C24XX
+ {
+ .config = &s3c24xx_gpiocfg_banka,
+ .chip = {
+ .base = S3C2410_GPA(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOA",
+ .ngpio = 27,
+ .direction_input = s3c24xx_gpiolib_banka_input,
+ .direction_output = s3c24xx_gpiolib_banka_output,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPB(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOB",
+ .ngpio = 11,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPC(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOC",
+ .ngpio = 16,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPD(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOD",
+ .ngpio = 16,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPE(0),
+ .label = "GPIOE",
+ .owner = THIS_MODULE,
+ .ngpio = 16,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPF(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOF",
+ .ngpio = 8,
+ .to_irq = s3c24xx_gpiolib_fbank_to_irq,
+ },
+ }, {
+ .irq_base = IRQ_EINT8,
+ .chip = {
+ .base = S3C2410_GPG(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOG",
+ .ngpio = 16,
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPH(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOH",
+ .ngpio = 15,
+ },
+ },
+ /* GPIOS for the S3C2443 and later devices. */
+ {
+ .base = S3C2440_GPJCON,
+ .chip = {
+ .base = S3C2410_GPJ(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOJ",
+ .ngpio = 16,
+ },
+ }, {
+ .base = S3C2443_GPKCON,
+ .chip = {
+ .base = S3C2410_GPK(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOK",
+ .ngpio = 16,
+ },
+ }, {
+ .base = S3C2443_GPLCON,
+ .chip = {
+ .base = S3C2410_GPL(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOL",
+ .ngpio = 15,
+ },
+ }, {
+ .base = S3C2443_GPMCON,
+ .chip = {
+ .base = S3C2410_GPM(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOM",
+ .ngpio = 2,
+ },
+ },
+#endif
+};
+
+/*
+ * GPIO bank summary:
+ *
+ * Bank GPIOs Style SlpCon ExtInt Group
+ * A 8 4Bit Yes 1
+ * B 7 4Bit Yes 1
+ * C 8 4Bit Yes 2
+ * D 5 4Bit Yes 3
+ * E 5 4Bit Yes None
+ * F 16 2Bit Yes 4 [1]
+ * G 7 4Bit Yes 5
+ * H 10 4Bit[2] Yes 6
+ * I 16 2Bit Yes None
+ * J 12 2Bit Yes None
+ * K 16 4Bit[2] No None
+ * L 15 4Bit[2] No None
+ * M 6 4Bit No IRQ_EINT
+ * N 16 2Bit No IRQ_EINT
+ * O 16 2Bit Yes 7
+ * P 15 2Bit Yes 8
+ * Q 9 2Bit Yes 9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
+#ifdef CONFIG_ARCH_S3C64XX
+ {
+ .chip = {
+ .base = S3C64XX_GPA(0),
+ .ngpio = S3C64XX_GPIO_A_NR,
+ .label = "GPA",
+ },
+ }, {
+ .chip = {
+ .base = S3C64XX_GPB(0),
+ .ngpio = S3C64XX_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S3C64XX_GPC(0),
+ .ngpio = S3C64XX_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .chip = {
+ .base = S3C64XX_GPD(0),
+ .ngpio = S3C64XX_GPIO_D_NR,
+ .label = "GPD",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[0],
+ .chip = {
+ .base = S3C64XX_GPE(0),
+ .ngpio = S3C64XX_GPIO_E_NR,
+ .label = "GPE",
+ },
+ }, {
+ .base = S3C64XX_GPG_BASE,
+ .chip = {
+ .base = S3C64XX_GPG(0),
+ .ngpio = S3C64XX_GPIO_G_NR,
+ .label = "GPG",
+ },
+ }, {
+ .base = S3C64XX_GPM_BASE,
+ .config = &samsung_gpio_cfgs[1],
+ .chip = {
+ .base = S3C64XX_GPM(0),
+ .ngpio = S3C64XX_GPIO_M_NR,
+ .label = "GPM",
+ .to_irq = s3c64xx_gpiolib_mbank_to_irq,
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
+#ifdef CONFIG_ARCH_S3C64XX
+ {
+ .base = S3C64XX_GPH_BASE + 0x4,
+ .chip = {
+ .base = S3C64XX_GPH(0),
+ .ngpio = S3C64XX_GPIO_H_NR,
+ .label = "GPH",
+ },
+ }, {
+ .base = S3C64XX_GPK_BASE + 0x4,
+ .config = &samsung_gpio_cfgs[0],
+ .chip = {
+ .base = S3C64XX_GPK(0),
+ .ngpio = S3C64XX_GPIO_K_NR,
+ .label = "GPK",
+ },
+ }, {
+ .base = S3C64XX_GPL_BASE + 0x4,
+ .config = &samsung_gpio_cfgs[1],
+ .chip = {
+ .base = S3C64XX_GPL(0),
+ .ngpio = S3C64XX_GPIO_L_NR,
+ .label = "GPL",
+ .to_irq = s3c64xx_gpiolib_lbank_to_irq,
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
+#ifdef CONFIG_ARCH_S3C64XX
+ {
+ .base = S3C64XX_GPF_BASE,
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S3C64XX_GPF(0),
+ .ngpio = S3C64XX_GPIO_F_NR,
+ .label = "GPF",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[7],
+ .chip = {
+ .base = S3C64XX_GPI(0),
+ .ngpio = S3C64XX_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[7],
+ .chip = {
+ .base = S3C64XX_GPJ(0),
+ .ngpio = S3C64XX_GPIO_J_NR,
+ .label = "GPJ",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S3C64XX_GPO(0),
+ .ngpio = S3C64XX_GPIO_O_NR,
+ .label = "GPO",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S3C64XX_GPP(0),
+ .ngpio = S3C64XX_GPIO_P_NR,
+ .label = "GPP",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S3C64XX_GPQ(0),
+ .ngpio = S3C64XX_GPIO_Q_NR,
+ .label = "GPQ",
+ },
+ }, {
+ .base = S3C64XX_GPN_BASE,
+ .irq_base = IRQ_EINT(0),
+ .config = &samsung_gpio_cfgs[5],
+ .chip = {
+ .base = S3C64XX_GPN(0),
+ .ngpio = S3C64XX_GPIO_N_NR,
+ .label = "GPN",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+#endif
+};
+
+/* TODO: cleanup soc_is_* */
+static __init int samsung_gpiolib_init(void)
+{
+ /*
+ * Currently there are two drivers that can provide GPIO support for
+ * Samsung SoCs. For device tree enabled platforms, the new
+ * pinctrl-samsung driver is used, providing both GPIO and pin control
+ * interfaces. For legacy (non-DT) platforms this driver is used.
+ */
+ if (of_have_populated_dt())
+ return 0;
+
+ if (soc_is_s3c24xx()) {
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+ ARRAY_SIZE(samsung_gpio_cfgs));
+ s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
+ ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
+ } else if (soc_is_s3c64xx()) {
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+ ARRAY_SIZE(samsung_gpio_cfgs));
+ samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
+ ARRAY_SIZE(s3c64xx_gpios_2bit),
+ S3C64XX_VA_GPIO + 0xE0, 0x20);
+ samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit,
+ ARRAY_SIZE(s3c64xx_gpios_4bit),
+ S3C64XX_VA_GPIO);
+ samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
+ ARRAY_SIZE(s3c64xx_gpios_4bit2));
+ }
+
+ return 0;
+}
+core_initcall(samsung_gpiolib_init);
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long flags;
+ int offset;
+ int ret;
+
+ if (!chip)
+ return -EINVAL;
+
+ offset = pin - chip->chip.base;
+
+ samsung_gpio_lock(chip, flags);
+ ret = samsung_gpio_do_setcfg(chip, offset, config);
+ samsung_gpio_unlock(chip, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
+
+int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+ unsigned int cfg)
+{
+ int ret;
+
+ for (; nr > 0; nr--, start++) {
+ ret = s3c_gpio_cfgpin(start, cfg);
+ if (ret != 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
+
+int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+ unsigned int cfg, samsung_gpio_pull_t pull)
+{
+ int ret;
+
+ for (; nr > 0; nr--, start++) {
+ s3c_gpio_setpull(start, pull);
+ ret = s3c_gpio_cfgpin(start, cfg);
+ if (ret != 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
+
+unsigned s3c_gpio_getcfg(unsigned int pin)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long flags;
+ unsigned ret = 0;
+ int offset;
+
+ if (chip) {
+ offset = pin - chip->chip.base;
+
+ samsung_gpio_lock(chip, flags);
+ ret = samsung_gpio_do_getcfg(chip, offset);
+ samsung_gpio_unlock(chip, flags);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_getcfg);
+
+int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long flags;
+ int offset, ret;
+
+ if (!chip)
+ return -EINVAL;
+
+ offset = pin - chip->chip.base;
+
+ samsung_gpio_lock(chip, flags);
+ ret = samsung_gpio_do_setpull(chip, offset, pull);
+ samsung_gpio_unlock(chip, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_setpull);
+
+samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long flags;
+ int offset;
+ u32 pup = 0;
+
+ if (chip) {
+ offset = pin - chip->chip.base;
+
+ samsung_gpio_lock(chip, flags);
+ pup = samsung_gpio_do_getpull(chip, offset);
+ samsung_gpio_unlock(chip, flags);
+ }
+
+ return (__force samsung_gpio_pull_t)pup;
+}
+EXPORT_SYMBOL(s3c_gpio_getpull);
+
+#ifdef CONFIG_PLAT_S3C24XX
+unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
+{
+ unsigned long flags;
+ unsigned long misccr;
+
+ local_irq_save(flags);
+ misccr = __raw_readl(S3C24XX_MISCCR);
+ misccr &= ~clear;
+ misccr ^= change;
+ __raw_writel(misccr, S3C24XX_MISCCR);
+ local_irq_restore(flags);
+
+ return misccr;
+}
+EXPORT_SYMBOL(s3c2410_modify_misccr);
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * GTA02 header
+ */
+
+#ifndef __MACH_S3C24XX_GTA02_H
+#define __MACH_S3C24XX_GTA02_H __FILE__
+
+#include <mach/regs-gpio.h>
+
+#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
+#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
+#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6)
+#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7)
+#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
+
+#define GTA02_IRQ_PCF50633 IRQ_EINT9
+
+#endif /* __MACH_S3C24XX_GTA02_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-1.0+
+//
+// Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org>
+//
+// S3C2410 bluetooth "driver"
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/rfkill.h>
+
+#include <plat/gpio-cfg.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include "h1940.h"
+
+#define DRV_NAME "h1940-bt"
+
+/* Bluetooth control */
+static void h1940bt_enable(int on)
+{
+ if (on) {
+ /* Power on the chip */
+ gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1);
+ /* Reset the chip */
+ mdelay(10);
+
+ gpio_set_value(S3C2410_GPH(1), 1);
+ mdelay(10);
+ gpio_set_value(S3C2410_GPH(1), 0);
+
+ h1940_led_blink_set(NULL, GPIO_LED_BLINK, NULL, NULL);
+ }
+ else {
+ gpio_set_value(S3C2410_GPH(1), 1);
+ mdelay(10);
+ gpio_set_value(S3C2410_GPH(1), 0);
+ mdelay(10);
+ gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0);
+
+ h1940_led_blink_set(NULL, GPIO_LED_NO_BLINK_LOW, NULL, NULL);
+ }
+}
+
+static int h1940bt_set_block(void *data, bool blocked)
+{
+ h1940bt_enable(!blocked);
+ return 0;
+}
+
+static const struct rfkill_ops h1940bt_rfkill_ops = {
+ .set_block = h1940bt_set_block,
+};
+
+static int h1940bt_probe(struct platform_device *pdev)
+{
+ struct rfkill *rfk;
+ int ret = 0;
+
+ ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev));
+ if (ret) {
+ dev_err(&pdev->dev, "could not get GPH1\n");
+ return ret;
+ }
+
+ ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev));
+ if (ret) {
+ gpio_free(S3C2410_GPH(1));
+ dev_err(&pdev->dev, "could not get BT_POWER\n");
+ return ret;
+ }
+
+ /* Configures BT serial port GPIOs */
+ s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+ s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
+ s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+ s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
+ s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+ s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
+ s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+ s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
+
+ rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+ &h1940bt_rfkill_ops, NULL);
+ if (!rfk) {
+ ret = -ENOMEM;
+ goto err_rfk_alloc;
+ }
+
+ ret = rfkill_register(rfk);
+ if (ret)
+ goto err_rfkill;
+
+ platform_set_drvdata(pdev, rfk);
+
+ return 0;
+
+err_rfkill:
+ rfkill_destroy(rfk);
+err_rfk_alloc:
+ return ret;
+}
+
+static int h1940bt_remove(struct platform_device *pdev)
+{
+ struct rfkill *rfk = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ gpio_free(S3C2410_GPH(1));
+
+ if (rfk) {
+ rfkill_unregister(rfk);
+ rfkill_destroy(rfk);
+ }
+ rfk = NULL;
+
+ h1940bt_enable(0);
+
+ return 0;
+}
+
+
+static struct platform_driver h1940bt_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ },
+ .probe = h1940bt_probe,
+ .remove = h1940bt_remove,
+};
+
+module_platform_driver(h1940bt_driver);
+
+MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
+MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip");
+MODULE_LICENSE("GPL");
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * iPAQ H1940 series definitions
+ */
+
+#ifndef __MACH_S3C24XX_H1940_H
+#define __MACH_S3C24XX_H1940_H __FILE__
+
+#define H1940_SUSPEND_CHECKSUM (0x30003ff8)
+#define H1940_SUSPEND_RESUMEAT (0x30081000)
+#define H1940_SUSPEND_CHECK (0x30080000)
+
+struct gpio_desc;
+
+extern void h1940_pm_return(void);
+extern int h1940_led_blink_set(struct gpio_desc *desc, int state,
+ unsigned long *delay_on,
+ unsigned long *delay_off);
+
+#include <linux/gpio.h>
+
+#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x))
+
+/* SD layer latch */
+
+#define H1940_LATCH_LCD_P0 H1940_LATCH_GPIO(0)
+#define H1940_LATCH_LCD_P1 H1940_LATCH_GPIO(1)
+#define H1940_LATCH_LCD_P2 H1940_LATCH_GPIO(2)
+#define H1940_LATCH_LCD_P3 H1940_LATCH_GPIO(3)
+#define H1940_LATCH_MAX1698_nSHUTDOWN H1940_LATCH_GPIO(4)
+#define H1940_LATCH_LED_RED H1940_LATCH_GPIO(5)
+#define H1940_LATCH_SDQ7 H1940_LATCH_GPIO(6)
+#define H1940_LATCH_USB_DP H1940_LATCH_GPIO(7)
+
+/* CPU layer latch */
+
+#define H1940_LATCH_UDA_POWER H1940_LATCH_GPIO(8)
+#define H1940_LATCH_AUDIO_POWER H1940_LATCH_GPIO(9)
+#define H1940_LATCH_SM803_ENABLE H1940_LATCH_GPIO(10)
+#define H1940_LATCH_LCD_P4 H1940_LATCH_GPIO(11)
+#define H1940_LATCH_SD_POWER H1940_LATCH_GPIO(12)
+#define H1940_LATCH_BLUETOOTH_POWER H1940_LATCH_GPIO(13)
+#define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14)
+#define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15)
+
+#endif /* __MACH_S3C24XX_H1940_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2003-2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#include <linux/device.h>
+
+/* We use `virtual` dma channels to hide the fact we have only a limited
+ * number of DMA channels, and not of all of them (dependent on the device)
+ * can be attached to any DMA source. We therefore let the DMA core handle
+ * the allocation of hardware channels to clients.
+*/
+
+enum dma_ch {
+ DMACH_XD0 = 0,
+ DMACH_XD1,
+ DMACH_SDI,
+ DMACH_SPI0,
+ DMACH_SPI1,
+ DMACH_UART0,
+ DMACH_UART1,
+ DMACH_UART2,
+ DMACH_TIMER,
+ DMACH_I2S_IN,
+ DMACH_I2S_OUT,
+ DMACH_PCM_IN,
+ DMACH_PCM_OUT,
+ DMACH_MIC_IN,
+ DMACH_USB_EP1,
+ DMACH_USB_EP2,
+ DMACH_USB_EP3,
+ DMACH_USB_EP4,
+ DMACH_UART0_SRC2, /* s3c2412 second uart sources */
+ DMACH_UART1_SRC2,
+ DMACH_UART2_SRC2,
+ DMACH_UART3, /* s3c2443 has extra uart */
+ DMACH_UART3_SRC2,
+ DMACH_SPI0_TX, /* s3c2443/2416/2450 hsspi0 */
+ DMACH_SPI0_RX, /* s3c2443/2416/2450 hsspi0 */
+ DMACH_SPI1_TX, /* s3c2443/2450 hsspi1 */
+ DMACH_SPI1_RX, /* s3c2443/2450 hsspi1 */
+ DMACH_MAX, /* the end entry */
+};
+
+#endif /* __ASM_ARCH_DMA_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#define S3C64XX_DMA_CHAN(name) ((unsigned long)(name))
+
+/* DMA0/SDMA0 */
+#define DMACH_UART0 "uart0_tx"
+#define DMACH_UART0_SRC2 "uart0_rx"
+#define DMACH_UART1 "uart1_tx"
+#define DMACH_UART1_SRC2 "uart1_rx"
+#define DMACH_UART2 "uart2_tx"
+#define DMACH_UART2_SRC2 "uart2_rx"
+#define DMACH_UART3 "uart3_tx"
+#define DMACH_UART3_SRC2 "uart3_rx"
+#define DMACH_PCM0_TX "pcm0_tx"
+#define DMACH_PCM0_RX "pcm0_rx"
+#define DMACH_I2S0_OUT "i2s0_tx"
+#define DMACH_I2S0_IN "i2s0_rx"
+#define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx")
+#define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx")
+#define DMACH_HSI_I2SV40_TX "i2s2_tx"
+#define DMACH_HSI_I2SV40_RX "i2s2_rx"
+
+/* DMA1/SDMA1 */
+#define DMACH_PCM1_TX "pcm1_tx"
+#define DMACH_PCM1_RX "pcm1_rx"
+#define DMACH_I2S1_OUT "i2s1_tx"
+#define DMACH_I2S1_IN "i2s1_rx"
+#define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx")
+#define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx")
+#define DMACH_AC97_PCMOUT "ac97_out"
+#define DMACH_AC97_PCMIN "ac97_in"
+#define DMACH_AC97_MICIN "ac97_mic"
+#define DMACH_PWM "pwm"
+#define DMACH_IRDA "irda"
+#define DMACH_EXTERNAL "external"
+#define DMACH_SECURITY_RX "sec_rx"
+#define DMACH_SECURITY_TX "sec_tx"
+
+enum dma_ch {
+ DMACH_MAX = 32
+};
+
+#include <linux/amba/pl08x.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "dma-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "dma-s3c64xx.h"
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - GPIO lib support
+ */
+
+/* some boards require extra gpio capacity to support external
+ * devices that need GPIO.
+ */
+
+#ifndef GPIO_SAMSUNG_S3C24XX_H
+#define GPIO_SAMSUNG_S3C24XX_H
+
+#include <mach/map.h>
+
+/*
+ * GPIO sizes for various SoCs:
+ *
+ * 2410 2412 2440 2443 2416
+ * 2442
+ * ---- ---- ---- ---- ----
+ * A 23 22 25 16 27
+ * B 11 11 11 11 11
+ * C 16 16 16 16 16
+ * D 16 16 16 16 16
+ * E 16 16 16 16 16
+ * F 8 8 8 8 8
+ * G 16 16 16 16 8
+ * H 11 11 11 15 15
+ * J -- -- 13 16 --
+ * K -- -- -- -- 16
+ * L -- -- -- 15 14
+ * M -- -- -- 2 2
+ */
+
+/* GPIO bank sizes */
+
+#define S3C2410_GPIO_A_NR (32)
+#define S3C2410_GPIO_B_NR (32)
+#define S3C2410_GPIO_C_NR (32)
+#define S3C2410_GPIO_D_NR (32)
+#define S3C2410_GPIO_E_NR (32)
+#define S3C2410_GPIO_F_NR (32)
+#define S3C2410_GPIO_G_NR (32)
+#define S3C2410_GPIO_H_NR (32)
+#define S3C2410_GPIO_J_NR (32) /* technically 16. */
+#define S3C2410_GPIO_K_NR (32) /* technically 16. */
+#define S3C2410_GPIO_L_NR (32) /* technically 15. */
+#define S3C2410_GPIO_M_NR (32) /* technically 2. */
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+ S3C2410_GPIO_A_START = 0,
+ S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+ S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+ S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+ S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+ S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+ S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+ S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+ S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
+ S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
+ S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
+ S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr))
+#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr))
+#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr))
+#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr))
+#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr))
+
+#ifdef CONFIG_CPU_S3C244X
+#define S3C_GPIO_END (S3C2410_GPJ(0) + 32)
+#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#define S3C_GPIO_END (S3C2410_GPM(0) + 32)
+#else
+#define S3C_GPIO_END (S3C2410_GPH(0) + 32)
+#endif
+
+#endif /* GPIO_SAMSUNG_S3C24XX_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - GPIO lib support
+ */
+
+#ifndef GPIO_SAMSUNG_S3C64XX_H
+#define GPIO_SAMSUNG_S3C64XX_H
+
+#ifdef CONFIG_GPIO_SAMSUNG
+
+/* GPIO bank sizes */
+#define S3C64XX_GPIO_A_NR (8)
+#define S3C64XX_GPIO_B_NR (7)
+#define S3C64XX_GPIO_C_NR (8)
+#define S3C64XX_GPIO_D_NR (5)
+#define S3C64XX_GPIO_E_NR (5)
+#define S3C64XX_GPIO_F_NR (16)
+#define S3C64XX_GPIO_G_NR (7)
+#define S3C64XX_GPIO_H_NR (10)
+#define S3C64XX_GPIO_I_NR (16)
+#define S3C64XX_GPIO_J_NR (12)
+#define S3C64XX_GPIO_K_NR (16)
+#define S3C64XX_GPIO_L_NR (15)
+#define S3C64XX_GPIO_M_NR (6)
+#define S3C64XX_GPIO_N_NR (16)
+#define S3C64XX_GPIO_O_NR (16)
+#define S3C64XX_GPIO_P_NR (15)
+#define S3C64XX_GPIO_Q_NR (9)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S3C64XX_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+ S3C64XX_GPIO_A_START = 0,
+ S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
+ S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
+ S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
+ S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
+ S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
+ S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
+ S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
+ S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
+ S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
+ S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
+ S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
+ S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
+ S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
+ S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
+ S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
+ S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
+};
+
+/* S3C64XX GPIO number definitions. */
+
+#define S3C64XX_GPA(_nr) (S3C64XX_GPIO_A_START + (_nr))
+#define S3C64XX_GPB(_nr) (S3C64XX_GPIO_B_START + (_nr))
+#define S3C64XX_GPC(_nr) (S3C64XX_GPIO_C_START + (_nr))
+#define S3C64XX_GPD(_nr) (S3C64XX_GPIO_D_START + (_nr))
+#define S3C64XX_GPE(_nr) (S3C64XX_GPIO_E_START + (_nr))
+#define S3C64XX_GPF(_nr) (S3C64XX_GPIO_F_START + (_nr))
+#define S3C64XX_GPG(_nr) (S3C64XX_GPIO_G_START + (_nr))
+#define S3C64XX_GPH(_nr) (S3C64XX_GPIO_H_START + (_nr))
+#define S3C64XX_GPI(_nr) (S3C64XX_GPIO_I_START + (_nr))
+#define S3C64XX_GPJ(_nr) (S3C64XX_GPIO_J_START + (_nr))
+#define S3C64XX_GPK(_nr) (S3C64XX_GPIO_K_START + (_nr))
+#define S3C64XX_GPL(_nr) (S3C64XX_GPIO_L_START + (_nr))
+#define S3C64XX_GPM(_nr) (S3C64XX_GPIO_M_START + (_nr))
+#define S3C64XX_GPN(_nr) (S3C64XX_GPIO_N_START + (_nr))
+#define S3C64XX_GPO(_nr) (S3C64XX_GPIO_O_START + (_nr))
+#define S3C64XX_GPP(_nr) (S3C64XX_GPIO_P_START + (_nr))
+#define S3C64XX_GPQ(_nr) (S3C64XX_GPIO_Q_START + (_nr))
+
+/* the end of the S3C64XX specific gpios */
+#define S3C64XX_GPIO_END (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define S3C_GPIO_END S3C64XX_GPIO_END
+
+/* define the number of gpios we need to the one after the GPQ() range */
+#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#endif /* GPIO_SAMSUNG */
+#endif /* GPIO_SAMSUNG_S3C64XX_H */
+
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "gpio-samsung-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "gpio-samsung-s3c64xx.h"
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_S3C24XX_H
+#define __ASM_ARCH_HARDWARE_S3C24XX_H
+
+extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
+
+#endif /* __ASM_ARCH_HARDWARE_S3C24XX_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-s3c2410/include/mach/io.h
+ * from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ * (C) 2003 Simtec Electronics
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_S3C24XX_H
+#define __ASM_ARM_ARCH_IO_S3C24XX_H
+
+#include <plat/map-base.h>
+
+/*
+ * ISA style IO, for each machine to sort out mappings for,
+ * if it implements it. We reserve two 16M regions for ISA,
+ * so the PC/104 can use separate addresses for 8-bit and
+ * 16-bit port I/O.
+ */
+#define PCIO_BASE S3C_ADDR(0x02000000)
+#define IO_SPACE_LIMIT 0x00ffffff
+#define S3C24XX_VA_ISA_WORD (PCIO_BASE)
+#define S3C24XX_VA_ISA_BYTE (PCIO_BASE + 0x01000000)
+
+#ifdef CONFIG_ISA
+
+#define inb(p) readb(S3C24XX_VA_ISA_BYTE + (p))
+#define inw(p) readw(S3C24XX_VA_ISA_WORD + (p))
+#define inl(p) readl(S3C24XX_VA_ISA_WORD + (p))
+
+#define outb(v,p) writeb((v), S3C24XX_VA_ISA_BYTE + (p))
+#define outw(v,p) writew((v), S3C24XX_VA_ISA_WORD + (p))
+#define outl(v,p) writel((v), S3C24XX_VA_ISA_WORD + (p))
+
+#define insb(p,d,l) readsb(S3C24XX_VA_ISA_BYTE + (p),d,l)
+#define insw(p,d,l) readsw(S3C24XX_VA_ISA_WORD + (p),d,l)
+#define insl(p,d,l) readsl(S3C24XX_VA_ISA_WORD + (p),d,l)
+
+#define outsb(p,d,l) writesb(S3C24XX_VA_ISA_BYTE + (p),d,l)
+#define outsw(p,d,l) writesw(S3C24XX_VA_ISA_WORD + (p),d,l)
+#define outsl(p,d,l) writesl(S3C24XX_VA_ISA_WORD + (p),d,l)
+
+#else
+
+#define __io(x) (PCIO_BASE + (x))
+
+#endif
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "io-s3c24xx.h"
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ */
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ */
+
+#define S3C2410_CPUIRQ_OFFSET (16)
+
+#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
+
+/* main cpu interrupts */
+#define IRQ_EINT0 S3C2410_IRQ(0) /* 16 */
+#define IRQ_EINT1 S3C2410_IRQ(1)
+#define IRQ_EINT2 S3C2410_IRQ(2)
+#define IRQ_EINT3 S3C2410_IRQ(3)
+#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */
+#define IRQ_EINT8t23 S3C2410_IRQ(5)
+#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */
+#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440,s3c2443 */
+#define IRQ_BATT_FLT S3C2410_IRQ(7)
+#define IRQ_TICK S3C2410_IRQ(8) /* 24 */
+#define IRQ_WDT S3C2410_IRQ(9) /* WDT/AC97 for s3c2443 */
+#define IRQ_TIMER0 S3C2410_IRQ(10)
+#define IRQ_TIMER1 S3C2410_IRQ(11)
+#define IRQ_TIMER2 S3C2410_IRQ(12)
+#define IRQ_TIMER3 S3C2410_IRQ(13)
+#define IRQ_TIMER4 S3C2410_IRQ(14)
+#define IRQ_UART2 S3C2410_IRQ(15)
+#define IRQ_LCD S3C2410_IRQ(16) /* 32 */
+#define IRQ_DMA0 S3C2410_IRQ(17) /* IRQ_DMA for s3c2443 */
+#define IRQ_DMA1 S3C2410_IRQ(18)
+#define IRQ_DMA2 S3C2410_IRQ(19)
+#define IRQ_DMA3 S3C2410_IRQ(20)
+#define IRQ_SDI S3C2410_IRQ(21)
+#define IRQ_SPI0 S3C2410_IRQ(22)
+#define IRQ_UART1 S3C2410_IRQ(23)
+#define IRQ_RESERVED24 S3C2410_IRQ(24) /* 40 */
+#define IRQ_NFCON S3C2410_IRQ(24) /* for s3c2440 */
+#define IRQ_USBD S3C2410_IRQ(25)
+#define IRQ_USBH S3C2410_IRQ(26)
+#define IRQ_IIC S3C2410_IRQ(27)
+#define IRQ_UART0 S3C2410_IRQ(28) /* 44 */
+#define IRQ_SPI1 S3C2410_IRQ(29)
+#define IRQ_RTC S3C2410_IRQ(30)
+#define IRQ_ADCPARENT S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT0_2412 S3C2410_IRQ(32)
+#define IRQ_EINT1_2412 S3C2410_IRQ(33)
+#define IRQ_EINT2_2412 S3C2410_IRQ(34)
+#define IRQ_EINT3_2412 S3C2410_IRQ(35)
+#define IRQ_EINT4 S3C2410_IRQ(36) /* 52 */
+#define IRQ_EINT5 S3C2410_IRQ(37)
+#define IRQ_EINT6 S3C2410_IRQ(38)
+#define IRQ_EINT7 S3C2410_IRQ(39)
+#define IRQ_EINT8 S3C2410_IRQ(40)
+#define IRQ_EINT9 S3C2410_IRQ(41)
+#define IRQ_EINT10 S3C2410_IRQ(42)
+#define IRQ_EINT11 S3C2410_IRQ(43)
+#define IRQ_EINT12 S3C2410_IRQ(44)
+#define IRQ_EINT13 S3C2410_IRQ(45)
+#define IRQ_EINT14 S3C2410_IRQ(46)
+#define IRQ_EINT15 S3C2410_IRQ(47)
+#define IRQ_EINT16 S3C2410_IRQ(48)
+#define IRQ_EINT17 S3C2410_IRQ(49)
+#define IRQ_EINT18 S3C2410_IRQ(50)
+#define IRQ_EINT19 S3C2410_IRQ(51)
+#define IRQ_EINT20 S3C2410_IRQ(52) /* 68 */
+#define IRQ_EINT21 S3C2410_IRQ(53)
+#define IRQ_EINT22 S3C2410_IRQ(54)
+#define IRQ_EINT23 S3C2410_IRQ(55)
+
+#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4)
+#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
+
+#define IRQ_LCD_FIFO S3C2410_IRQ(56)
+#define IRQ_LCD_FRAME S3C2410_IRQ(57)
+
+/* IRQs for the interal UARTs, and ADC
+ * these need to be ordered in number of appearance in the
+ * SUBSRC mask register
+*/
+
+#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+58)
+
+#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 74 */
+#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1)
+#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2)
+
+#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 77 */
+#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4)
+#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5)
+
+#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 80 */
+#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7)
+#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8)
+
+#define IRQ_TC S3C2410_IRQSUB(9)
+#define IRQ_ADC S3C2410_IRQSUB(10)
+
+/* extra irqs for s3c2412 */
+
+#define IRQ_S3C2412_CFSDI S3C2410_IRQ(21)
+
+#define IRQ_S3C2412_SDI S3C2410_IRQSUB(13)
+#define IRQ_S3C2412_CF S3C2410_IRQSUB(14)
+
+
+#define IRQ_S3C2416_EINT8t15 S3C2410_IRQ(5)
+#define IRQ_S3C2416_DMA S3C2410_IRQ(17)
+#define IRQ_S3C2416_UART3 S3C2410_IRQ(18)
+#define IRQ_S3C2416_SDI1 S3C2410_IRQ(20)
+#define IRQ_S3C2416_SDI0 S3C2410_IRQ(21)
+
+#define IRQ_S3C2416_LCD2 S3C2410_IRQSUB(15)
+#define IRQ_S3C2416_LCD3 S3C2410_IRQSUB(16)
+#define IRQ_S3C2416_LCD4 S3C2410_IRQSUB(17)
+#define IRQ_S3C2416_DMA0 S3C2410_IRQSUB(18)
+#define IRQ_S3C2416_DMA1 S3C2410_IRQSUB(19)
+#define IRQ_S3C2416_DMA2 S3C2410_IRQSUB(20)
+#define IRQ_S3C2416_DMA3 S3C2410_IRQSUB(21)
+#define IRQ_S3C2416_DMA4 S3C2410_IRQSUB(22)
+#define IRQ_S3C2416_DMA5 S3C2410_IRQSUB(23)
+#define IRQ_S32416_WDT S3C2410_IRQSUB(27)
+#define IRQ_S32416_AC97 S3C2410_IRQSUB(28)
+
+/* second interrupt-register of s3c2416/s3c2450 */
+
+#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 58 + 29)
+#define IRQ_S3C2416_2D S3C2416_IRQ(0)
+#define IRQ_S3C2416_IIC1 S3C2416_IRQ(1)
+#define IRQ_S3C2416_RESERVED2 S3C2416_IRQ(2)
+#define IRQ_S3C2416_RESERVED3 S3C2416_IRQ(3)
+#define IRQ_S3C2416_PCM0 S3C2416_IRQ(4)
+#define IRQ_S3C2416_PCM1 S3C2416_IRQ(5)
+#define IRQ_S3C2416_I2S0 S3C2416_IRQ(6)
+#define IRQ_S3C2416_I2S1 S3C2416_IRQ(7)
+
+/* extra irqs for s3c2440 */
+
+#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */
+#define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */
+#define IRQ_S3C2440_WDT S3C2410_IRQSUB(13)
+#define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14)
+
+/* irqs for s3c2443 */
+
+#define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */
+#define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */
+#define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */
+#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */
+#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */
+
+#define IRQ_S3C2416_HSMMC0 S3C2410_IRQ(21) /* S3C2416/S3C2450 */
+
+#define IRQ_HSMMC0 IRQ_S3C2416_HSMMC0
+#define IRQ_HSMMC1 IRQ_S3C2443_HSMMC
+
+#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14)
+#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15)
+#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16)
+#define IRQ_S3C2443_LCD4 S3C2410_IRQSUB(17)
+
+#define IRQ_S3C2443_DMA0 S3C2410_IRQSUB(18)
+#define IRQ_S3C2443_DMA1 S3C2410_IRQSUB(19)
+#define IRQ_S3C2443_DMA2 S3C2410_IRQSUB(20)
+#define IRQ_S3C2443_DMA3 S3C2410_IRQSUB(21)
+#define IRQ_S3C2443_DMA4 S3C2410_IRQSUB(22)
+#define IRQ_S3C2443_DMA5 S3C2410_IRQSUB(23)
+
+/* UART3 */
+#define IRQ_S3C2443_RX3 S3C2410_IRQSUB(24)
+#define IRQ_S3C2443_TX3 S3C2410_IRQSUB(25)
+#define IRQ_S3C2443_ERR3 S3C2410_IRQSUB(26)
+
+#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27)
+#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28)
+
+#if defined(CONFIG_CPU_S3C2416)
+#define NR_IRQS (IRQ_S3C2416_I2S1 + 1)
+#else
+#define NR_IRQS (IRQ_S3C2443_AC97 + 1)
+#endif
+
+/* compatibility define. */
+#define IRQ_UART3 IRQ_S3C2443_UART3
+#define IRQ_S3CUART_RX3 IRQ_S3C2443_RX3
+#define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3
+#define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3
+
+#define IRQ_LCD_VSYNC IRQ_S3C2443_LCD3
+#define IRQ_LCD_SYSTEM IRQ_S3C2443_LCD2
+
+#ifdef CONFIG_CPU_S3C2440
+#define IRQ_S3C244X_AC97 IRQ_S3C2440_AC97
+#else
+#define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97
+#endif
+
+/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
+#define FIQ_START IRQ_EINT0
+
+#endif /* __ASM_ARCH_IRQ_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - IRQ support
+ */
+
+#ifndef __ASM_MACH_S3C64XX_IRQS_H
+#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET (32)
+
+#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
+
+#define IRQ_VIC0_BASE S3C_IRQ(0)
+#define IRQ_VIC1_BASE S3C_IRQ(32)
+
+/* VIC based IRQs */
+
+#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x))
+#define S3C64XX_IRQ_VIC1(x) (IRQ_VIC1_BASE + (x))
+
+/* VIC0 */
+
+#define IRQ_EINT0_3 S3C64XX_IRQ_VIC0(0)
+#define IRQ_EINT4_11 S3C64XX_IRQ_VIC0(1)
+#define IRQ_RTC_TIC S3C64XX_IRQ_VIC0(2)
+#define IRQ_CAMIF_C S3C64XX_IRQ_VIC0(3)
+#define IRQ_CAMIF_P S3C64XX_IRQ_VIC0(4)
+#define IRQ_CAMIF_MC S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIC1 S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIS S3C64XX_IRQ_VIC0(6)
+#define IRQ_S3C6400_CAMIF_MP S3C64XX_IRQ_VIC0(6)
+#define IRQ_CAMIF_WE_C S3C64XX_IRQ_VIC0(7)
+#define IRQ_S3C6410_G3D S3C64XX_IRQ_VIC0(8)
+#define IRQ_S3C6400_CAMIF_WE_P S3C64XX_IRQ_VIC0(8)
+#define IRQ_POST0 S3C64XX_IRQ_VIC0(9)
+#define IRQ_ROTATOR S3C64XX_IRQ_VIC0(10)
+#define IRQ_2D S3C64XX_IRQ_VIC0(11)
+#define IRQ_TVENC S3C64XX_IRQ_VIC0(12)
+#define IRQ_SCALER S3C64XX_IRQ_VIC0(13)
+#define IRQ_BATF S3C64XX_IRQ_VIC0(14)
+#define IRQ_JPEG S3C64XX_IRQ_VIC0(15)
+#define IRQ_MFC S3C64XX_IRQ_VIC0(16)
+#define IRQ_SDMA0 S3C64XX_IRQ_VIC0(17)
+#define IRQ_SDMA1 S3C64XX_IRQ_VIC0(18)
+#define IRQ_ARM_DMAERR S3C64XX_IRQ_VIC0(19)
+#define IRQ_ARM_DMA S3C64XX_IRQ_VIC0(20)
+#define IRQ_ARM_DMAS S3C64XX_IRQ_VIC0(21)
+#define IRQ_KEYPAD S3C64XX_IRQ_VIC0(22)
+#define IRQ_TIMER0_VIC S3C64XX_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC S3C64XX_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC S3C64XX_IRQ_VIC0(25)
+#define IRQ_WDT S3C64XX_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC S3C64XX_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC S3C64XX_IRQ_VIC0(28)
+#define IRQ_LCD_FIFO S3C64XX_IRQ_VIC0(29)
+#define IRQ_LCD_VSYNC S3C64XX_IRQ_VIC0(30)
+#define IRQ_LCD_SYSTEM S3C64XX_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_19 S3C64XX_IRQ_VIC1(0)
+#define IRQ_EINT20_27 S3C64XX_IRQ_VIC1(1)
+#define IRQ_PCM0 S3C64XX_IRQ_VIC1(2)
+#define IRQ_PCM1 S3C64XX_IRQ_VIC1(3)
+#define IRQ_AC97 S3C64XX_IRQ_VIC1(4)
+#define IRQ_UART0 S3C64XX_IRQ_VIC1(5)
+#define IRQ_UART1 S3C64XX_IRQ_VIC1(6)
+#define IRQ_UART2 S3C64XX_IRQ_VIC1(7)
+#define IRQ_UART3 S3C64XX_IRQ_VIC1(8)
+#define IRQ_DMA0 S3C64XX_IRQ_VIC1(9)
+#define IRQ_DMA1 S3C64XX_IRQ_VIC1(10)
+#define IRQ_ONENAND0 S3C64XX_IRQ_VIC1(11)
+#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12)
+#define IRQ_NFC S3C64XX_IRQ_VIC1(13)
+#define IRQ_CFCON S3C64XX_IRQ_VIC1(14)
+#define IRQ_USBH S3C64XX_IRQ_VIC1(15)
+#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16)
+#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17)
+#define IRQ_IIC S3C64XX_IRQ_VIC1(18)
+#define IRQ_HSItx S3C64XX_IRQ_VIC1(19)
+#define IRQ_HSIrx S3C64XX_IRQ_VIC1(20)
+#define IRQ_RESERVED S3C64XX_IRQ_VIC1(21)
+#define IRQ_MSM S3C64XX_IRQ_VIC1(22)
+#define IRQ_HOSTIF S3C64XX_IRQ_VIC1(23)
+#define IRQ_HSMMC0 S3C64XX_IRQ_VIC1(24)
+#define IRQ_HSMMC1 S3C64XX_IRQ_VIC1(25)
+#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */
+#define IRQ_OTG S3C64XX_IRQ_VIC1(26)
+#define IRQ_IRDA S3C64XX_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM S3C64XX_IRQ_VIC1(28)
+#define IRQ_SEC S3C64XX_IRQ_VIC1(29)
+#define IRQ_PENDN S3C64XX_IRQ_VIC1(30)
+#define IRQ_TC IRQ_PENDN
+#define IRQ_ADC S3C64XX_IRQ_VIC1(31)
+
+/* compatibility for device defines */
+
+#define IRQ_IIC1 IRQ_S3C6410_IIC1
+
+/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
+ * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
+ * which we place after the pair of VICs. */
+
+#define S3C_IRQ_EINT_BASE S3C_IRQ(64+5)
+
+#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x) S3C_EINT(x)
+#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0))
+
+/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+#define IRQ_EINT_GROUP1_NR (15)
+#define IRQ_EINT_GROUP2_NR (8)
+#define IRQ_EINT_GROUP3_NR (5)
+#define IRQ_EINT_GROUP4_NR (14)
+#define IRQ_EINT_GROUP5_NR (7)
+#define IRQ_EINT_GROUP6_NR (10)
+#define IRQ_EINT_GROUP7_NR (16)
+#define IRQ_EINT_GROUP8_NR (15)
+#define IRQ_EINT_GROUP9_NR (9)
+
+#define IRQ_EINT_GROUP_BASE S3C_EINT(28)
+#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0x00)
+#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP3_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP4_BASE (IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
+#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
+#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP7_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
+#define IRQ_EINT_GROUP9_BASE (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
+
+#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
+
+/* Some boards have their own IRQs behind this */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+/* Set the default nr_irqs, boards can override if necessary */
+#define S3C64XX_NR_IRQS IRQ_BOARD_START
+
+/* Compatibility */
+
+#define IRQ_ONENAND IRQ_ONENAND0
+#define IRQ_I2S0 IRQ_S3C6410_IIS
+
+#endif /* __ASM_MACH_S3C64XX_IRQS_H */
+
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "irqs-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "irqs-s3c64xx.h"
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - Memory map definitions
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#include <plat/map-base.h>
+#include <plat/map-s3c.h>
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C2410_PA_IRQ (0x4A000000)
+#define S3C24XX_SZ_IRQ SZ_1M
+
+/* memory controller registers */
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* Timers */
+#define S3C2410_PA_TIMER (0x51000000)
+#define S3C24XX_SZ_TIMER SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_SZ_CLKPWR SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV (0x52000000)
+#define S3C24XX_SZ_USBDEV SZ_1M
+
+/* Watchdog */
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_UART SZ_1M
+#define S3C24XX_SZ_IIS SZ_1M
+#define S3C24XX_SZ_ADC SZ_1M
+#define S3C24XX_SZ_SPI SZ_1M
+#define S3C24XX_SZ_SDI SZ_1M
+#define S3C24XX_SZ_NAND SZ_1M
+#define S3C24XX_SZ_GPIO SZ_1M
+
+/* USB host controller */
+#define S3C2410_PA_USBHOST (0x49000000)
+
+/* S3C2416/S3C2443/S3C2450 High-Speed USB Gadget */
+#define S3C2416_PA_HSUDC (0x49800000)
+#define S3C2416_SZ_HSUDC (SZ_4K)
+
+/* DMA controller */
+#define S3C2410_PA_DMA (0x4B000000)
+#define S3C24XX_SZ_DMA SZ_1M
+
+/* Clock and Power management */
+#define S3C2410_PA_CLKPWR (0x4C000000)
+
+/* LCD controller */
+#define S3C2410_PA_LCD (0x4D000000)
+#define S3C24XX_SZ_LCD SZ_1M
+
+/* NAND flash controller */
+#define S3C2410_PA_NAND (0x4E000000)
+
+/* IIC hardware controller */
+#define S3C2410_PA_IIC (0x54000000)
+
+/* IIS controller */
+#define S3C2410_PA_IIS (0x55000000)
+
+/* RTC */
+#define S3C2410_PA_RTC (0x57000000)
+#define S3C24XX_SZ_RTC SZ_1M
+
+/* ADC */
+#define S3C2410_PA_ADC (0x58000000)
+
+/* SPI */
+#define S3C2410_PA_SPI (0x59000000)
+#define S3C2443_PA_SPI0 (0x52000000)
+#define S3C2443_PA_SPI1 S3C2410_PA_SPI
+#define S3C2410_SPI1 (0x20)
+#define S3C2412_SPI1 (0x100)
+
+/* SDI */
+#define S3C2410_PA_SDI (0x5A000000)
+
+/* CAMIF */
+#define S3C2440_PA_CAMIF (0x4F000000)
+#define S3C2440_SZ_CAMIF SZ_1M
+
+/* AC97 */
+
+#define S3C2440_PA_AC97 (0x5B000000)
+#define S3C2440_SZ_AC97 SZ_1M
+
+/* S3C2443/S3C2416 High-speed SD/MMC */
+#define S3C2443_PA_HSMMC (0x4A800000)
+#define S3C2416_PA_HSMMC0 (0x4AC00000)
+
+#define S3C2443_PA_FB (0x4C800000)
+
+/* S3C2412 memory and IO controls */
+#define S3C2412_PA_SSMC (0x4F000000)
+
+#define S3C2412_PA_EBI (0x48800000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2410_CS0 (0x00000000)
+#define S3C2410_CS1 (0x08000000)
+#define S3C2410_CS2 (0x10000000)
+#define S3C2410_CS3 (0x18000000)
+#define S3C2410_CS4 (0x20000000)
+#define S3C2410_CS5 (0x28000000)
+#define S3C2410_CS6 (0x30000000)
+#define S3C2410_CS7 (0x38000000)
+
+#define S3C2410_SDRAM_PA (S3C2410_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ S3C2410_PA_IRQ
+#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL
+#define S3C24XX_PA_DMA S3C2410_PA_DMA
+#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
+#define S3C24XX_PA_LCD S3C2410_PA_LCD
+#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
+#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
+#define S3C24XX_PA_IIS S3C2410_PA_IIS
+#define S3C24XX_PA_RTC S3C2410_PA_RTC
+#define S3C24XX_PA_ADC S3C2410_PA_ADC
+#define S3C24XX_PA_SPI S3C2410_PA_SPI
+#define S3C24XX_PA_SPI1 (S3C2410_PA_SPI + S3C2410_SPI1)
+#define S3C24XX_PA_SDI S3C2410_PA_SDI
+#define S3C24XX_PA_NAND S3C2410_PA_NAND
+
+#define S3C_PA_FB S3C2443_PA_FB
+#define S3C_PA_IIC S3C2410_PA_IIC
+#define S3C_PA_USBHOST S3C2410_PA_USBHOST
+#define S3C_PA_HSMMC0 S3C2416_PA_HSMMC0
+#define S3C_PA_HSMMC1 S3C2443_PA_HSMMC
+#define S3C_PA_WDT S3C2410_PA_WATCHDOG
+#define S3C_PA_NAND S3C24XX_PA_NAND
+
+#define S3C_PA_SPI0 S3C2443_PA_SPI0
+#define S3C_PA_SPI1 S3C2443_PA_SPI1
+
+#define SAMSUNG_PA_TIMER S3C2410_PA_TIMER
+
+#endif /* __ASM_ARCH_MAP_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Memory map definitions
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s3c.h>
+
+/*
+ * Post-mux Chip Select Regions Xm0CSn_
+ * These may be used by SROM, NAND or CF depending on settings
+ */
+
+#define S3C64XX_PA_XM0CSN0 (0x10000000)
+#define S3C64XX_PA_XM0CSN1 (0x18000000)
+#define S3C64XX_PA_XM0CSN2 (0x20000000)
+#define S3C64XX_PA_XM0CSN3 (0x28000000)
+#define S3C64XX_PA_XM0CSN4 (0x30000000)
+#define S3C64XX_PA_XM0CSN5 (0x38000000)
+
+/* HSMMC units */
+#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000))
+#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0)
+#define S3C64XX_PA_HSMMC1 S3C64XX_PA_HSMMC(1)
+#define S3C64XX_PA_HSMMC2 S3C64XX_PA_HSMMC(2)
+
+#define S3C_PA_UART (0x7F005000)
+#define S3C_PA_UART0 (S3C_PA_UART + 0x00)
+#define S3C_PA_UART1 (S3C_PA_UART + 0x400)
+#define S3C_PA_UART2 (S3C_PA_UART + 0x800)
+#define S3C_PA_UART3 (S3C_PA_UART + 0xC00)
+#define S3C_UART_OFFSET (0x400)
+
+/* See notes on UART VA mapping in debug-macro.S */
+#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
+
+#define S3C_VA_UART0 S3C_VA_UARTx(0)
+#define S3C_VA_UART1 S3C_VA_UARTx(1)
+#define S3C_VA_UART2 S3C_VA_UARTx(2)
+#define S3C_VA_UART3 S3C_VA_UARTx(3)
+
+#define S3C64XX_PA_SROM (0x70000000)
+
+#define S3C64XX_PA_ONENAND0 (0x70100000)
+#define S3C64XX_PA_ONENAND0_BUF (0x20000000)
+#define S3C64XX_SZ_ONENAND0_BUF (SZ_64M)
+
+/* NAND and OneNAND1 controllers occupy the same register region
+ (depending on SoC POP version) */
+#define S3C64XX_PA_ONENAND1 (0x70200000)
+#define S3C64XX_PA_ONENAND1_BUF (0x28000000)
+#define S3C64XX_SZ_ONENAND1_BUF (SZ_64M)
+
+#define S3C64XX_PA_NAND (0x70200000)
+#define S3C64XX_PA_FB (0x77100000)
+#define S3C64XX_PA_USB_HSOTG (0x7C000000)
+#define S3C64XX_PA_WATCHDOG (0x7E004000)
+#define S3C64XX_PA_RTC (0x7E005000)
+#define S3C64XX_PA_KEYPAD (0x7E00A000)
+#define S3C64XX_PA_ADC (0x7E00B000)
+#define S3C64XX_PA_SYSCON (0x7E00F000)
+#define S3C64XX_PA_AC97 (0x7F001000)
+#define S3C64XX_PA_IIS0 (0x7F002000)
+#define S3C64XX_PA_IIS1 (0x7F003000)
+#define S3C64XX_PA_TIMER (0x7F006000)
+#define S3C64XX_PA_IIC0 (0x7F004000)
+#define S3C64XX_PA_SPI0 (0x7F00B000)
+#define S3C64XX_PA_SPI1 (0x7F00C000)
+#define S3C64XX_PA_PCM0 (0x7F009000)
+#define S3C64XX_PA_PCM1 (0x7F00A000)
+#define S3C64XX_PA_IISV4 (0x7F00D000)
+#define S3C64XX_PA_IIC1 (0x7F00F000)
+
+#define S3C64XX_PA_GPIO (0x7F008000)
+#define S3C64XX_SZ_GPIO SZ_4K
+
+#define S3C64XX_PA_SDRAM (0x50000000)
+
+#define S3C64XX_PA_CFCON (0x70300000)
+
+#define S3C64XX_PA_VIC0 (0x71200000)
+#define S3C64XX_PA_VIC1 (0x71300000)
+
+#define S3C64XX_PA_MODEM (0x74108000)
+
+#define S3C64XX_PA_USBHOST (0x74300000)
+
+#define S3C64XX_PA_USB_HSPHY (0x7C100000)
+
+/* compatibility defines. */
+#define S3C_PA_TIMER S3C64XX_PA_TIMER
+#define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0
+#define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1
+#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2
+#define S3C_PA_IIC S3C64XX_PA_IIC0
+#define S3C_PA_IIC1 S3C64XX_PA_IIC1
+#define S3C_PA_NAND S3C64XX_PA_NAND
+#define S3C_PA_ONENAND S3C64XX_PA_ONENAND0
+#define S3C_PA_ONENAND_BUF S3C64XX_PA_ONENAND0_BUF
+#define S3C_SZ_ONENAND_BUF S3C64XX_SZ_ONENAND0_BUF
+#define S3C_PA_FB S3C64XX_PA_FB
+#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
+#define S3C_PA_RTC S3C64XX_PA_RTC
+#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
+#define S3C_PA_SPI0 S3C64XX_PA_SPI0
+#define S3C_PA_SPI1 S3C64XX_PA_SPI1
+
+#define SAMSUNG_PA_ADC S3C64XX_PA_ADC
+#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON
+#define SAMSUNG_PA_KEYPAD S3C64XX_PA_KEYPAD
+#define SAMSUNG_PA_TIMER S3C64XX_PA_TIMER
+
+#endif /* __ASM_ARCH_6400_MAP_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "map-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "map-s3c64xx.h"
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "regs-clock.h"
+#include "regs-irq-s3c24xx.h"
+#include <mach/irqs.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+ unsigned long tmp = __raw_readl(S3C2410_CLKCON);
+
+ /* re-start uart clocks */
+ tmp |= S3C2410_CLKCON_UART0;
+ tmp |= S3C2410_CLKCON_UART1;
+ tmp |= S3C2410_CLKCON_UART2;
+
+ __raw_writel(tmp, S3C2410_CLKCON);
+ udelay(10);
+#endif
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
+ __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
+
+ /* ack any outstanding external interrupts before we go to sleep */
+
+ __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+ __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+ __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+ __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
+}
+
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+static inline void s3c_pm_show_resume_irqs(int start, unsigned long which,
+ unsigned long mask)
+{
+ int i;
+
+ which &= ~mask;
+
+ for (i = 0; i <= 31; i++) {
+ if (which & (1L<<i)) {
+ S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
+ }
+ }
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+ S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
+ __raw_readl(S3C2410_SRCPND),
+ __raw_readl(S3C2410_EINTPEND));
+
+ s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
+ s3c_irqwake_intmask);
+
+ s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+ s3c_irqwake_eintmask);
+}
+
+static inline void s3c_pm_restored_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+#ifdef CONFIG_PM_SLEEP
+#define s3c_irqwake_intallow (1L << 30 | 0xfL)
+#define s3c_irqwake_eintallow (0x0000fff0L)
+#else
+#define s3c_irqwake_eintallow 0
+#define s3c_irqwake_intallow 0
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ */
+
+#ifndef __MACH_S3C64XX_PM_CORE_H
+#define __MACH_S3C64XX_PM_CORE_H __FILE__
+
+#include <linux/serial_s3c.h>
+#include <linux/delay.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/map.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+ u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+ /* As a note, since the S3C64XX UARTs generally have multiple
+ * clock sources, we simply enable PCLK at the moment and hope
+ * that the resume settings for the UART are suitable for the
+ * use with PCLK.
+ */
+
+ tmp |= S3C_CLKCON_PCLK_UART0;
+ tmp |= S3C_CLKCON_PCLK_UART1;
+ tmp |= S3C_CLKCON_PCLK_UART2;
+ tmp |= S3C_CLKCON_PCLK_UART3;
+
+ __raw_writel(tmp, S3C_PCLK_GATE);
+ udelay(10);
+#endif
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ /* VIC should have already been taken care of */
+
+ /* clear any pending EINT0 interrupts */
+ __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+#ifdef CONFIG_PM_SLEEP
+#define s3c_irqwake_eintallow ((1 << 28) - 1)
+#define s3c_irqwake_intallow (~0)
+#else
+#define s3c_irqwake_eintallow 0
+#define s3c_irqwake_intallow 0
+#endif
+
+static inline void s3c_pm_restored_gpios(void)
+{
+ /* ensure sleep mode has been cleared from the system */
+
+ __raw_writel(0, S3C64XX_SLPEN);
+}
+
+static inline void samsung_pm_saved_gpios(void)
+{
+ /* turn on the sleep mode and keep it there, as it seems that during
+ * suspend the xCON registers get re-set and thus you can end up with
+ * problems between going to sleep and resuming.
+ */
+
+ __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN);
+}
+#endif /* __MACH_S3C64XX_PM_CORE_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "pm-core-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "pm-core-s3c64xx.h"
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 clock register definitions
+ */
+
+#ifndef __ASM_ARM_REGS_CLOCK
+#define __ASM_ARM_REGS_CLOCK
+
+#include <mach/map.h>
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
+
+#define S3C2410_LOCKTIME S3C2410_CLKREG(0x00)
+#define S3C2410_MPLLCON S3C2410_CLKREG(0x04)
+#define S3C2410_UPLLCON S3C2410_CLKREG(0x08)
+#define S3C2410_CLKCON S3C2410_CLKREG(0x0C)
+#define S3C2410_CLKSLOW S3C2410_CLKREG(0x10)
+#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
+
+#define S3C2410_CLKCON_IDLE (1<<2)
+#define S3C2410_CLKCON_POWER (1<<3)
+#define S3C2410_CLKCON_NAND (1<<4)
+#define S3C2410_CLKCON_LCDC (1<<5)
+#define S3C2410_CLKCON_USBH (1<<6)
+#define S3C2410_CLKCON_USBD (1<<7)
+#define S3C2410_CLKCON_PWMT (1<<8)
+#define S3C2410_CLKCON_SDI (1<<9)
+#define S3C2410_CLKCON_UART0 (1<<10)
+#define S3C2410_CLKCON_UART1 (1<<11)
+#define S3C2410_CLKCON_UART2 (1<<12)
+#define S3C2410_CLKCON_GPIO (1<<13)
+#define S3C2410_CLKCON_RTC (1<<14)
+#define S3C2410_CLKCON_ADC (1<<15)
+#define S3C2410_CLKCON_IIC (1<<16)
+#define S3C2410_CLKCON_IIS (1<<17)
+#define S3C2410_CLKCON_SPI (1<<18)
+
+#define S3C2410_CLKDIVN_PDIVN (1<<0)
+#define S3C2410_CLKDIVN_HDIVN (1<<1)
+
+#define S3C2410_CLKSLOW_UCLK_OFF (1<<7)
+#define S3C2410_CLKSLOW_MPLL_OFF (1<<5)
+#define S3C2410_CLKSLOW_SLOW (1<<4)
+#define S3C2410_CLKSLOW_SLOWVAL(x) (x)
+#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7)
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+
+/* extra registers */
+#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18)
+
+#define S3C2440_CLKCON_CAMERA (1<<19)
+#define S3C2440_CLKCON_AC97 (1<<20)
+
+#define S3C2440_CLKDIVN_PDIVN (1<<0)
+#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1)
+#define S3C2440_CLKDIVN_HDIVN_1 (0<<1)
+#define S3C2440_CLKDIVN_HDIVN_2 (1<<1)
+#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1)
+#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1)
+#define S3C2440_CLKDIVN_UCLK (1<<3)
+
+#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0)
+#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4)
+#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8)
+#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9)
+#define S3C2440_CAMDIVN_DVSEN (1<<12)
+
+#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5)
+
+#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
+
+#if defined(CONFIG_CPU_S3C2412)
+
+#define S3C2412_OSCSET S3C2410_CLKREG(0x18)
+#define S3C2412_CLKSRC S3C2410_CLKREG(0x1C)
+
+#define S3C2412_PLLCON_OFF (1<<20)
+
+#define S3C2412_CLKDIVN_PDIVN (1<<2)
+#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0)
+#define S3C2412_CLKDIVN_ARMDIVN (1<<3)
+#define S3C2412_CLKDIVN_DVSEN (1<<4)
+#define S3C2412_CLKDIVN_HALFHCLK (1<<5)
+#define S3C2412_CLKDIVN_USB48DIV (1<<6)
+#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8)
+#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8)
+#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12)
+#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12)
+#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16)
+#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16)
+
+#define S3C2412_CLKCON_WDT (1<<28)
+#define S3C2412_CLKCON_SPI (1<<27)
+#define S3C2412_CLKCON_IIS (1<<26)
+#define S3C2412_CLKCON_IIC (1<<25)
+#define S3C2412_CLKCON_ADC (1<<24)
+#define S3C2412_CLKCON_RTC (1<<23)
+#define S3C2412_CLKCON_GPIO (1<<22)
+#define S3C2412_CLKCON_UART2 (1<<21)
+#define S3C2412_CLKCON_UART1 (1<<20)
+#define S3C2412_CLKCON_UART0 (1<<19)
+#define S3C2412_CLKCON_SDI (1<<18)
+#define S3C2412_CLKCON_PWMT (1<<17)
+#define S3C2412_CLKCON_USBD (1<<16)
+#define S3C2412_CLKCON_CAMCLK (1<<15)
+#define S3C2412_CLKCON_UARTCLK (1<<14)
+/* missing 13 */
+#define S3C2412_CLKCON_USB_HOST48 (1<<12)
+#define S3C2412_CLKCON_USB_DEV48 (1<<11)
+#define S3C2412_CLKCON_HCLKdiv2 (1<<10)
+#define S3C2412_CLKCON_HCLKx2 (1<<9)
+#define S3C2412_CLKCON_SDRAM (1<<8)
+/* missing 7 */
+#define S3C2412_CLKCON_USBH S3C2410_CLKCON_USBH
+#define S3C2412_CLKCON_LCDC S3C2410_CLKCON_LCDC
+#define S3C2412_CLKCON_NAND S3C2410_CLKCON_NAND
+#define S3C2412_CLKCON_DMA3 (1<<3)
+#define S3C2412_CLKCON_DMA2 (1<<2)
+#define S3C2412_CLKCON_DMA1 (1<<1)
+#define S3C2412_CLKCON_DMA0 (1<<0)
+
+/* clock sourec controls */
+
+#define S3C2412_CLKSRC_EXTCLKDIV_MASK (7 << 0)
+#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT (0)
+#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV (1<<3)
+#define S3C2412_CLKSRC_MSYSCLK_MPLL (1<<4)
+#define S3C2412_CLKSRC_USYSCLK_UPLL (1<<5)
+#define S3C2412_CLKSRC_UARTCLK_MPLL (1<<8)
+#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9)
+#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10)
+#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11)
+#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12)
+#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14)
+
+#endif /* CONFIG_CPU_S3C2412 */
+
+#define S3C2416_CLKDIV2 S3C2410_CLKREG(0x28)
+
+#endif /* __ASM_ARM_REGS_CLOCK */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX clock register definitions
+ */
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+/*
+ * FIXME: Remove remaining definitions
+ */
+
+#define S3C_CLKREG(x) (S3C_VA_SYS + (x))
+
+#define S3C_PCLK_GATE S3C_CLKREG(0x34)
+#define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
+#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120)
+
+/* PCLK GATE Registers */
+#define S3C_CLKCON_PCLK_UART3 (1<<4)
+#define S3C_CLKCON_PCLK_UART2 (1<<3)
+#define S3C_CLKCON_PCLK_UART1 (1<<2)
+#define S3C_CLKCON_PCLK_UART0 (1<<1)
+
+/* MEM_SYS_CFG */
+#define MEM_SYS_CFG_INDEP_CF 0x4000
+#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
+
+#endif /* _PLAT_REGS_CLOCK_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "regs-clock-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "regs-clock-s3c64xx.h"
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * S3C2410 GPIO register definitions
+ */
+
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H
+
+#include <plat/map-s3c.h>
+
+#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
+
+/* general configuration options */
+
+#define S3C2410_GPIO_LEAVE (0xFFFFFFFF)
+#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */
+#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1)
+#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */
+#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */
+#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */
+
+/* register address for the GPIO registers.
+ * S3C24XX_GPIOREG2 is for the second set of registers in the
+ * GPIO which move between s3c2410 and s3c2412 type systems */
+
+#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
+
+
+/* configure GPIO ports A..G */
+
+/* port A - S3C2410: 22bits, zero in bit X makes pin X output
+ * 1 makes port special function, this is default
+*/
+#define S3C2410_GPACON S3C2410_GPIOREG(0x00)
+#define S3C2410_GPADAT S3C2410_GPIOREG(0x04)
+
+#define S3C2410_GPA0_ADDR0 (1<<0)
+#define S3C2410_GPA1_ADDR16 (1<<1)
+#define S3C2410_GPA2_ADDR17 (1<<2)
+#define S3C2410_GPA3_ADDR18 (1<<3)
+#define S3C2410_GPA4_ADDR19 (1<<4)
+#define S3C2410_GPA5_ADDR20 (1<<5)
+#define S3C2410_GPA6_ADDR21 (1<<6)
+#define S3C2410_GPA7_ADDR22 (1<<7)
+#define S3C2410_GPA8_ADDR23 (1<<8)
+#define S3C2410_GPA9_ADDR24 (1<<9)
+#define S3C2410_GPA10_ADDR25 (1<<10)
+#define S3C2410_GPA11_ADDR26 (1<<11)
+#define S3C2410_GPA12_nGCS1 (1<<12)
+#define S3C2410_GPA13_nGCS2 (1<<13)
+#define S3C2410_GPA14_nGCS3 (1<<14)
+#define S3C2410_GPA15_nGCS4 (1<<15)
+#define S3C2410_GPA16_nGCS5 (1<<16)
+#define S3C2410_GPA17_CLE (1<<17)
+#define S3C2410_GPA18_ALE (1<<18)
+#define S3C2410_GPA19_nFWE (1<<19)
+#define S3C2410_GPA20_nFRE (1<<20)
+#define S3C2410_GPA21_nRSTOUT (1<<21)
+#define S3C2410_GPA22_nFCE (1<<22)
+
+/* 0x08 and 0x0c are reserved on S3C2410 */
+
+/* S3C2410:
+ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
+ * 00 = input, 01 = output, 10=special function, 11=reserved
+
+ * bit 0,1 = pin 0, 2,3= pin 1...
+ *
+ * CPBUP = pull up resistor control, 1=disabled, 0=enabled
+*/
+
+#define S3C2410_GPBCON S3C2410_GPIOREG(0x10)
+#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14)
+#define S3C2410_GPBUP S3C2410_GPIOREG(0x18)
+
+/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
+
+#define S3C2410_GPB0_TOUT0 (0x02 << 0)
+
+#define S3C2410_GPB1_TOUT1 (0x02 << 2)
+
+#define S3C2410_GPB2_TOUT2 (0x02 << 4)
+
+#define S3C2410_GPB3_TOUT3 (0x02 << 6)
+
+#define S3C2410_GPB4_TCLK0 (0x02 << 8)
+#define S3C2410_GPB4_MASK (0x03 << 8)
+
+#define S3C2410_GPB5_nXBACK (0x02 << 10)
+#define S3C2443_GPB5_XBACK (0x03 << 10)
+
+#define S3C2410_GPB6_nXBREQ (0x02 << 12)
+#define S3C2443_GPB6_XBREQ (0x03 << 12)
+
+#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2443_GPB7_XDACK1 (0x03 << 14)
+
+#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
+
+#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2443_GPB9_XDACK0 (0x03 << 18)
+
+#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
+
+#define S3C2410_GPB_PUPDIS(x) (1<<(x))
+
+/* Port C consits of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's sync/etc.
+*/
+
+#define S3C2410_GPCCON S3C2410_GPIOREG(0x20)
+#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24)
+#define S3C2410_GPCUP S3C2410_GPIOREG(0x28)
+#define S3C2410_GPC0_LEND (0x02 << 0)
+#define S3C2410_GPC1_VCLK (0x02 << 2)
+#define S3C2410_GPC2_VLINE (0x02 << 4)
+#define S3C2410_GPC3_VFRAME (0x02 << 6)
+#define S3C2410_GPC4_VM (0x02 << 8)
+#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
+#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
+#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
+#define S3C2410_GPC8_VD0 (0x02 << 16)
+#define S3C2410_GPC9_VD1 (0x02 << 18)
+#define S3C2410_GPC10_VD2 (0x02 << 20)
+#define S3C2410_GPC11_VD3 (0x02 << 22)
+#define S3C2410_GPC12_VD4 (0x02 << 24)
+#define S3C2410_GPC13_VD5 (0x02 << 26)
+#define S3C2410_GPC14_VD6 (0x02 << 28)
+#define S3C2410_GPC15_VD7 (0x02 << 30)
+#define S3C2410_GPC_PUPDIS(x) (1<<(x))
+
+/*
+ * S3C2410: Port D consists of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's data.
+ *
+ * almost identical setup to port c
+*/
+
+#define S3C2410_GPDCON S3C2410_GPIOREG(0x30)
+#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34)
+#define S3C2410_GPDUP S3C2410_GPIOREG(0x38)
+
+#define S3C2410_GPD0_VD8 (0x02 << 0)
+#define S3C2442_GPD0_nSPICS1 (0x03 << 0)
+
+#define S3C2410_GPD1_VD9 (0x02 << 2)
+#define S3C2442_GPD1_SPICLK1 (0x03 << 2)
+
+#define S3C2410_GPD2_VD10 (0x02 << 4)
+
+#define S3C2410_GPD3_VD11 (0x02 << 6)
+
+#define S3C2410_GPD4_VD12 (0x02 << 8)
+
+#define S3C2410_GPD5_VD13 (0x02 << 10)
+
+#define S3C2410_GPD6_VD14 (0x02 << 12)
+
+#define S3C2410_GPD7_VD15 (0x02 << 14)
+
+#define S3C2410_GPD8_VD16 (0x02 << 16)
+#define S3C2440_GPD8_SPIMISO1 (0x03 << 16)
+
+#define S3C2410_GPD9_VD17 (0x02 << 18)
+#define S3C2440_GPD9_SPIMOSI1 (0x03 << 18)
+
+#define S3C2410_GPD10_VD18 (0x02 << 20)
+#define S3C2440_GPD10_SPICLK1 (0x03 << 20)
+
+#define S3C2410_GPD11_VD19 (0x02 << 22)
+
+#define S3C2410_GPD12_VD20 (0x02 << 24)
+
+#define S3C2410_GPD13_VD21 (0x02 << 26)
+
+#define S3C2410_GPD14_VD22 (0x02 << 28)
+#define S3C2410_GPD14_nSS1 (0x03 << 28)
+
+#define S3C2410_GPD15_VD23 (0x02 << 30)
+#define S3C2410_GPD15_nSS0 (0x03 << 30)
+
+#define S3C2410_GPD_PUPDIS(x) (1<<(x))
+
+/* S3C2410:
+ * Port E consists of 16 GPIO/Special function
+ *
+ * again, the same as port B, but dealing with I2S, SDI, and
+ * more miscellaneous functions
+ *
+ * GPIO / interrupt inputs
+*/
+
+#define S3C2410_GPECON S3C2410_GPIOREG(0x40)
+#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44)
+#define S3C2410_GPEUP S3C2410_GPIOREG(0x48)
+
+#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
+#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
+#define S3C2410_GPE0_MASK (0x03 << 0)
+
+#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
+#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
+#define S3C2410_GPE1_MASK (0x03 << 2)
+
+#define S3C2410_GPE2_CDCLK (0x02 << 4)
+#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
+
+#define S3C2410_GPE3_I2SSDI (0x02 << 6)
+#define S3C2443_GPE3_AC_SDI (0x03 << 6)
+#define S3C2410_GPE3_nSS0 (0x03 << 6)
+#define S3C2410_GPE3_MASK (0x03 << 6)
+
+#define S3C2410_GPE4_I2SSDO (0x02 << 8)
+#define S3C2443_GPE4_AC_SDO (0x03 << 8)
+#define S3C2410_GPE4_I2SSDI (0x03 << 8)
+#define S3C2410_GPE4_MASK (0x03 << 8)
+
+#define S3C2410_GPE5_SDCLK (0x02 << 10)
+#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
+#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
+
+#define S3C2410_GPE6_SDCMD (0x02 << 12)
+#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
+#define S3C2443_GPE6_AC_SDI (0x03 << 12)
+
+#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
+#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
+#define S3C2443_GPE7_AC_SDO (0x03 << 14)
+
+#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
+#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
+#define S3C2443_GPE8_AC_SYNC (0x03 << 16)
+
+#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
+#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
+#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
+
+#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
+#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
+
+#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
+
+#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
+
+#define S3C2410_GPE13_SPICLK0 (0x02 << 26)
+
+#define S3C2410_GPE14_IICSCL (0x02 << 28)
+#define S3C2410_GPE14_MASK (0x03 << 28)
+
+#define S3C2410_GPE15_IICSDA (0x02 << 30)
+#define S3C2410_GPE15_MASK (0x03 << 30)
+
+#define S3C2440_GPE0_ACSYNC (0x03 << 0)
+#define S3C2440_GPE1_ACBITCLK (0x03 << 2)
+#define S3C2440_GPE2_ACRESET (0x03 << 4)
+#define S3C2440_GPE3_ACIN (0x03 << 6)
+#define S3C2440_GPE4_ACOUT (0x03 << 8)
+
+#define S3C2410_GPE_PUPDIS(x) (1<<(x))
+
+/* S3C2410:
+ * Port F consists of 8 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+ *
+ * GPFCON has 2 bits for each of the input pins on port F
+ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
+ *
+ * pull up works like all other ports.
+ *
+ * GPIO/serial/misc pins
+*/
+
+#define S3C2410_GPFCON S3C2410_GPIOREG(0x50)
+#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54)
+#define S3C2410_GPFUP S3C2410_GPIOREG(0x58)
+
+#define S3C2410_GPF0_EINT0 (0x02 << 0)
+#define S3C2410_GPF1_EINT1 (0x02 << 2)
+#define S3C2410_GPF2_EINT2 (0x02 << 4)
+#define S3C2410_GPF3_EINT3 (0x02 << 6)
+#define S3C2410_GPF4_EINT4 (0x02 << 8)
+#define S3C2410_GPF5_EINT5 (0x02 << 10)
+#define S3C2410_GPF6_EINT6 (0x02 << 12)
+#define S3C2410_GPF7_EINT7 (0x02 << 14)
+#define S3C2410_GPF_PUPDIS(x) (1<<(x))
+
+/* S3C2410:
+ * Port G consists of 8 GPIO/IRQ/Special function
+ *
+ * GPGCON has 2 bits for each of the input pins on port G
+ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPGCON S3C2410_GPIOREG(0x60)
+#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64)
+#define S3C2410_GPGUP S3C2410_GPIOREG(0x68)
+
+#define S3C2410_GPG0_EINT8 (0x02 << 0)
+
+#define S3C2410_GPG1_EINT9 (0x02 << 2)
+
+#define S3C2410_GPG2_EINT10 (0x02 << 4)
+#define S3C2410_GPG2_nSS0 (0x03 << 4)
+
+#define S3C2410_GPG3_EINT11 (0x02 << 6)
+#define S3C2410_GPG3_nSS1 (0x03 << 6)
+
+#define S3C2410_GPG4_EINT12 (0x02 << 8)
+#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
+
+#define S3C2410_GPG5_EINT13 (0x02 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
+
+#define S3C2410_GPG6_EINT14 (0x02 << 12)
+#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
+
+#define S3C2410_GPG7_EINT15 (0x02 << 14)
+#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
+
+#define S3C2410_GPG8_EINT16 (0x02 << 16)
+
+#define S3C2410_GPG9_EINT17 (0x02 << 18)
+
+#define S3C2410_GPG10_EINT18 (0x02 << 20)
+
+#define S3C2410_GPG11_EINT19 (0x02 << 22)
+#define S3C2410_GPG11_TCLK1 (0x03 << 22)
+#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
+
+#define S3C2410_GPG12_EINT20 (0x02 << 24)
+#define S3C2410_GPG12_XMON (0x03 << 24)
+#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
+#define S3C2443_GPG12_nINPACK (0x03 << 24)
+
+#define S3C2410_GPG13_EINT21 (0x02 << 26)
+#define S3C2410_GPG13_nXPON (0x03 << 26)
+#define S3C2443_GPG13_CF_nREG (0x03 << 26)
+
+#define S3C2410_GPG14_EINT22 (0x02 << 28)
+#define S3C2410_GPG14_YMON (0x03 << 28)
+#define S3C2443_GPG14_CF_RESET (0x03 << 28)
+
+#define S3C2410_GPG15_EINT23 (0x02 << 30)
+#define S3C2410_GPG15_nYPON (0x03 << 30)
+#define S3C2443_GPG15_CF_PWR (0x03 << 30)
+
+#define S3C2410_GPG_PUPDIS(x) (1<<(x))
+
+/* Port H consists of11 GPIO/serial/Misc pins
+ *
+ * GPHCON has 2 bits for each of the input pins on port H
+ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPHCON S3C2410_GPIOREG(0x70)
+#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74)
+#define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
+
+#define S3C2410_GPH0_nCTS0 (0x02 << 0)
+#define S3C2416_GPH0_TXD0 (0x02 << 0)
+
+#define S3C2410_GPH1_nRTS0 (0x02 << 2)
+#define S3C2416_GPH1_RXD0 (0x02 << 2)
+
+#define S3C2410_GPH2_TXD0 (0x02 << 4)
+#define S3C2416_GPH2_TXD1 (0x02 << 4)
+
+#define S3C2410_GPH3_RXD0 (0x02 << 6)
+#define S3C2416_GPH3_RXD1 (0x02 << 6)
+
+#define S3C2410_GPH4_TXD1 (0x02 << 8)
+#define S3C2416_GPH4_TXD2 (0x02 << 8)
+
+#define S3C2410_GPH5_RXD1 (0x02 << 10)
+#define S3C2416_GPH5_RXD2 (0x02 << 10)
+
+#define S3C2410_GPH6_TXD2 (0x02 << 12)
+#define S3C2416_GPH6_TXD3 (0x02 << 12)
+#define S3C2410_GPH6_nRTS1 (0x03 << 12)
+#define S3C2416_GPH6_nRTS2 (0x03 << 12)
+
+#define S3C2410_GPH7_RXD2 (0x02 << 14)
+#define S3C2416_GPH7_RXD3 (0x02 << 14)
+#define S3C2410_GPH7_nCTS1 (0x03 << 14)
+#define S3C2416_GPH7_nCTS2 (0x03 << 14)
+
+#define S3C2410_GPH8_UCLK (0x02 << 16)
+#define S3C2416_GPH8_nCTS0 (0x02 << 16)
+
+#define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
+#define S3C2442_GPH9_nSPICS0 (0x03 << 18)
+#define S3C2416_GPH9_nRTS0 (0x02 << 18)
+
+#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+#define S3C2416_GPH10_nCTS1 (0x02 << 20)
+
+#define S3C2416_GPH11_nRTS1 (0x02 << 22)
+
+#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24)
+
+#define S3C2416_GPH13_CLKOUT0 (0x02 << 26)
+
+#define S3C2416_GPH14_CLKOUT1 (0x02 << 28)
+
+/* The S3C2412 and S3C2413 move the GPJ register set to after
+ * GPH, which means all registers after 0x80 are now offset by 0x10
+ * for the 2412/2413 from the 2410/2440/2442
+*/
+
+/*
+ * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits
+ * for each of the pins on port J.
+ * 00 - input, 01 output, 10 - camera
+ *
+ * Pull up works like all other ports.
+ */
+
+#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
+#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
+#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
+#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C)
+
+/* S3C2443 and above */
+#define S3C2440_GPJCON S3C2410_GPIOREG(0xD0)
+#define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4)
+#define S3C2440_GPJUP S3C2410_GPIOREG(0xD8)
+
+#define S3C2443_GPKCON S3C2410_GPIOREG(0xE0)
+#define S3C2443_GPKDAT S3C2410_GPIOREG(0xE4)
+#define S3C2443_GPKUP S3C2410_GPIOREG(0xE8)
+
+#define S3C2443_GPLCON S3C2410_GPIOREG(0xF0)
+#define S3C2443_GPLDAT S3C2410_GPIOREG(0xF4)
+#define S3C2443_GPLUP S3C2410_GPIOREG(0xF8)
+
+#define S3C2443_GPMCON S3C2410_GPIOREG(0x100)
+#define S3C2443_GPMDAT S3C2410_GPIOREG(0x104)
+#define S3C2443_GPMUP S3C2410_GPIOREG(0x108)
+
+/* miscellaneous control */
+#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
+
+/* see clock.h for dclk definitions */
+
+/* pullup control on databus */
+#define S3C2410_MISCCR_SPUCR_HEN (0<<0)
+#define S3C2410_MISCCR_SPUCR_HDIS (1<<0)
+#define S3C2410_MISCCR_SPUCR_LEN (0<<1)
+#define S3C2410_MISCCR_SPUCR_LDIS (1<<1)
+
+#define S3C2410_MISCCR_USBDEV (0<<3)
+#define S3C2410_MISCCR_USBHOST (1<<3)
+
+#define S3C2410_MISCCR_CLK0_MPLL (0<<4)
+#define S3C2410_MISCCR_CLK0_UPLL (1<<4)
+#define S3C2410_MISCCR_CLK0_FCLK (2<<4)
+#define S3C2410_MISCCR_CLK0_HCLK (3<<4)
+#define S3C2410_MISCCR_CLK0_PCLK (4<<4)
+#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4)
+#define S3C2410_MISCCR_CLK0_MASK (7<<4)
+
+#define S3C2412_MISCCR_CLK0_RTC (2<<4)
+
+#define S3C2410_MISCCR_CLK1_MPLL (0<<8)
+#define S3C2410_MISCCR_CLK1_UPLL (1<<8)
+#define S3C2410_MISCCR_CLK1_FCLK (2<<8)
+#define S3C2410_MISCCR_CLK1_HCLK (3<<8)
+#define S3C2410_MISCCR_CLK1_PCLK (4<<8)
+#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8)
+#define S3C2410_MISCCR_CLK1_MASK (7<<8)
+
+#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8)
+
+#define S3C2410_MISCCR_USBSUSPND0 (1<<12)
+#define S3C2416_MISCCR_SEL_SUSPND (1<<12)
+#define S3C2410_MISCCR_USBSUSPND1 (1<<13)
+
+#define S3C2410_MISCCR_nRSTCON (1<<16)
+
+#define S3C2410_MISCCR_nEN_SCLK0 (1<<17)
+#define S3C2410_MISCCR_nEN_SCLK1 (1<<18)
+#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */
+#define S3C2410_MISCCR_SDSLEEP (7<<17)
+
+#define S3C2416_MISCCR_FLT_I2C (1<<24)
+#define S3C2416_MISCCR_HSSPI_EN2 (1<<31)
+
+/* external interrupt control... */
+/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
+ * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
+ * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
+ *
+ * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
+ *
+ * Samsung datasheet p9-25
+*/
+#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88)
+#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C)
+#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90)
+
+#define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88)
+#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C)
+#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90)
+
+/* interrupt filtering control for EINT16..EINT23 */
+#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94)
+#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98)
+#define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C)
+#define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0)
+
+#define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94)
+#define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98)
+#define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C)
+#define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0)
+
+/* values for interrupt filtering */
+#define S3C2410_EINTFLT_PCLK (0x00)
+#define S3C2410_EINTFLT_EXTCLK (1<<7)
+#define S3C2410_EINTFLT_WIDTHMSK(x) ((x) & 0x3f)
+
+/* removed EINTxxxx defs from here, not meant for this */
+
+/* GSTATUS have miscellaneous information in them
+ *
+ * These move between s3c2410 and s3c2412 style systems.
+ */
+
+#define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC)
+#define S3C2410_GSTATUS1 S3C2410_GPIOREG(0x0B0)
+#define S3C2410_GSTATUS2 S3C2410_GPIOREG(0x0B4)
+#define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8)
+#define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC)
+
+#define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC)
+#define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0)
+#define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4)
+#define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8)
+#define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC)
+
+#define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC)
+#define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0)
+#define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4)
+#define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8)
+#define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC)
+
+#define S3C2410_GSTATUS0_nWAIT (1<<3)
+#define S3C2410_GSTATUS0_NCON (1<<2)
+#define S3C2410_GSTATUS0_RnB (1<<1)
+#define S3C2410_GSTATUS0_nBATTFLT (1<<0)
+
+#define S3C2410_GSTATUS1_IDMASK (0xffff0000)
+#define S3C2410_GSTATUS1_2410 (0x32410000)
+#define S3C2410_GSTATUS1_2412 (0x32412001)
+#define S3C2410_GSTATUS1_2416 (0x32416003)
+#define S3C2410_GSTATUS1_2440 (0x32440000)
+#define S3C2410_GSTATUS1_2442 (0x32440aaa)
+/* some 2416 CPUs report this value also */
+#define S3C2410_GSTATUS1_2450 (0x32450003)
+
+#define S3C2410_GSTATUS2_WTRESET (1<<2)
+#define S3C2410_GSTATUS2_OFFRESET (1<<1)
+#define S3C2410_GSTATUS2_PONRESET (1<<0)
+
+/* 2412/2413 sleep configuration registers */
+
+#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C)
+#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C)
+#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C)
+#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C)
+#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C)
+#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C)
+
+/* definitions for each pin bit */
+#define S3C2412_GPIO_SLPCON_LOW ( 0x00 )
+#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
+#define S3C2412_GPIO_SLPCON_IN ( 0x02 )
+#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
+
+#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2))
+#define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2))
+#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2))
+#define S3C2412_SLPCON_PULL(x) ( 0x03 << ((x) * 2))
+#define S3C2412_SLPCON_EINT(x) ( 0x02 << ((x) * 2)) /* only IRQ pins */
+#define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2))
+
+#define S3C2412_SLPCON_ALL_LOW (0x0)
+#define S3C2412_SLPCON_ALL_HIGH (0x11111111 | 0x44444444)
+#define S3C2412_SLPCON_ALL_IN (0x22222222 | 0x88888888)
+#define S3C2412_SLPCON_ALL_PULL (0x33333333)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
+
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H
+#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__
+
+/* Base addresses for each of the banks */
+
+#define S3C64XX_GPIOREG(reg) (S3C64XX_VA_GPIO + (reg))
+
+#define S3C64XX_GPA_BASE S3C64XX_GPIOREG(0x0000)
+#define S3C64XX_GPB_BASE S3C64XX_GPIOREG(0x0020)
+#define S3C64XX_GPC_BASE S3C64XX_GPIOREG(0x0040)
+#define S3C64XX_GPD_BASE S3C64XX_GPIOREG(0x0060)
+#define S3C64XX_GPE_BASE S3C64XX_GPIOREG(0x0080)
+#define S3C64XX_GPF_BASE S3C64XX_GPIOREG(0x00A0)
+#define S3C64XX_GPG_BASE S3C64XX_GPIOREG(0x00C0)
+#define S3C64XX_GPH_BASE S3C64XX_GPIOREG(0x00E0)
+#define S3C64XX_GPI_BASE S3C64XX_GPIOREG(0x0100)
+#define S3C64XX_GPJ_BASE S3C64XX_GPIOREG(0x0120)
+#define S3C64XX_GPK_BASE S3C64XX_GPIOREG(0x0800)
+#define S3C64XX_GPL_BASE S3C64XX_GPIOREG(0x0810)
+#define S3C64XX_GPM_BASE S3C64XX_GPIOREG(0x0820)
+#define S3C64XX_GPN_BASE S3C64XX_GPIOREG(0x0830)
+#define S3C64XX_GPO_BASE S3C64XX_GPIOREG(0x0140)
+#define S3C64XX_GPP_BASE S3C64XX_GPIOREG(0x0160)
+#define S3C64XX_GPQ_BASE S3C64XX_GPIOREG(0x0180)
+
+/* SPCON */
+
+#define S3C64XX_SPCON S3C64XX_GPIOREG(0x1A0)
+
+#define S3C64XX_SPCON_DRVCON_CAM_MASK (0x3 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_SHIFT (30)
+#define S3C64XX_SPCON_DRVCON_CAM_2mA (0x0 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_4mA (0x1 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_7mA (0x2 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_9mA (0x3 << 30)
+
+#define S3C64XX_SPCON_DRVCON_HSSPI_MASK (0x3 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT (28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_2mA (0x0 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_4mA (0x1 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_7mA (0x2 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_9mA (0x3 << 28)
+
+#define S3C64XX_SPCON_DRVCON_HSMMC_MASK (0x3 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT (26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_2mA (0x0 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_4mA (0x1 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_7mA (0x2 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_9mA (0x3 << 26)
+
+#define S3C64XX_SPCON_DRVCON_LCD_MASK (0x3 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_SHIFT (24)
+#define S3C64XX_SPCON_DRVCON_LCD_2mA (0x0 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_4mA (0x1 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_7mA (0x2 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_9mA (0x3 << 24)
+
+#define S3C64XX_SPCON_DRVCON_MODEM_MASK (0x3 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT (22)
+#define S3C64XX_SPCON_DRVCON_MODEM_2mA (0x0 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_4mA (0x1 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_7mA (0x2 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_9mA (0x3 << 22)
+
+#define S3C64XX_SPCON_nRSTOUT_OEN (1 << 21)
+
+#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK (0x3 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT (18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA (0x0 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA (0x1 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA (0x2 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA (0x3 << 18)
+
+#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK (0x3 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT (16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED (0x0 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN (0x1 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_UP (0x2 << 16)
+
+#define S3C64XX_SPCON_MEM1_D_PUD1_MASK (0x3 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT (14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED (0x0 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN (0x1 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_UP (0x2 << 14)
+
+#define S3C64XX_SPCON_MEM1_D_PUD0_MASK (0x3 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT (12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED (0x0 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN (0x1 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_UP (0x2 << 12)
+
+#define S3C64XX_SPCON_MEM0_D_PUD_MASK (0x3 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT (8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED (0x0 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DOWN (0x1 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_UP (0x2 << 8)
+
+#define S3C64XX_SPCON_USBH_DMPD (1 << 7)
+#define S3C64XX_SPCON_USBH_DPPD (1 << 6)
+#define S3C64XX_SPCON_USBH_PUSW2 (1 << 5)
+#define S3C64XX_SPCON_USBH_PUSW1 (1 << 4)
+#define S3C64XX_SPCON_USBH_SUSPND (1 << 3)
+
+#define S3C64XX_SPCON_LCD_SEL_MASK (0x3 << 0)
+#define S3C64XX_SPCON_LCD_SEL_SHIFT (0)
+#define S3C64XX_SPCON_LCD_SEL_HOST (0x0 << 0)
+#define S3C64XX_SPCON_LCD_SEL_RGB (0x1 << 0)
+#define S3C64XX_SPCON_LCD_SEL_606_656 (0x2 << 0)
+
+
+/* External interrupt registers */
+
+#define S3C64XX_EINT12CON S3C64XX_GPIOREG(0x200)
+#define S3C64XX_EINT34CON S3C64XX_GPIOREG(0x204)
+#define S3C64XX_EINT56CON S3C64XX_GPIOREG(0x208)
+#define S3C64XX_EINT78CON S3C64XX_GPIOREG(0x20C)
+#define S3C64XX_EINT9CON S3C64XX_GPIOREG(0x210)
+
+#define S3C64XX_EINT12FLTCON S3C64XX_GPIOREG(0x220)
+#define S3C64XX_EINT34FLTCON S3C64XX_GPIOREG(0x224)
+#define S3C64XX_EINT56FLTCON S3C64XX_GPIOREG(0x228)
+#define S3C64XX_EINT78FLTCON S3C64XX_GPIOREG(0x22C)
+#define S3C64XX_EINT9FLTCON S3C64XX_GPIOREG(0x230)
+
+#define S3C64XX_EINT12MASK S3C64XX_GPIOREG(0x240)
+#define S3C64XX_EINT34MASK S3C64XX_GPIOREG(0x244)
+#define S3C64XX_EINT56MASK S3C64XX_GPIOREG(0x248)
+#define S3C64XX_EINT78MASK S3C64XX_GPIOREG(0x24C)
+#define S3C64XX_EINT9MASK S3C64XX_GPIOREG(0x250)
+
+#define S3C64XX_EINT12PEND S3C64XX_GPIOREG(0x260)
+#define S3C64XX_EINT34PEND S3C64XX_GPIOREG(0x264)
+#define S3C64XX_EINT56PEND S3C64XX_GPIOREG(0x268)
+#define S3C64XX_EINT78PEND S3C64XX_GPIOREG(0x26C)
+#define S3C64XX_EINT9PEND S3C64XX_GPIOREG(0x270)
+
+#define S3C64XX_PRIORITY S3C64XX_GPIOREG(0x280)
+#define S3C64XX_PRIORITY_ARB(x) (1 << (x))
+
+#define S3C64XX_SERVICE S3C64XX_GPIOREG(0x284)
+#define S3C64XX_SERVICEPEND S3C64XX_GPIOREG(0x288)
+
+#define S3C64XX_EINT0CON0 S3C64XX_GPIOREG(0x900)
+#define S3C64XX_EINT0CON1 S3C64XX_GPIOREG(0x904)
+#define S3C64XX_EINT0FLTCON0 S3C64XX_GPIOREG(0x910)
+#define S3C64XX_EINT0FLTCON1 S3C64XX_GPIOREG(0x914)
+#define S3C64XX_EINT0FLTCON2 S3C64XX_GPIOREG(0x918)
+#define S3C64XX_EINT0FLTCON3 S3C64XX_GPIOREG(0x91C)
+
+#define S3C64XX_EINT0MASK S3C64XX_GPIOREG(0x920)
+#define S3C64XX_EINT0PEND S3C64XX_GPIOREG(0x924)
+
+/* GPIO sleep configuration */
+
+#define S3C64XX_SPCONSLP S3C64XX_GPIOREG(0x880)
+
+#define S3C64XX_SPCONSLP_TDO_PULLDOWN (1 << 14)
+#define S3C64XX_SPCONSLP_CKE1INIT (1 << 5)
+
+#define S3C64XX_SPCONSLP_RSTOUT_MASK (0x3 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT0 (0x0 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT1 (0x1 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_HIZ (0x2 << 12)
+
+#define S3C64XX_SPCONSLP_KPCOL_MASK (0x3 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT0 (0x0 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT1 (0x1 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_INP (0x2 << 0)
+
+
+#define S3C64XX_SLPEN S3C64XX_GPIOREG(0x930)
+
+#define S3C64XX_SLPEN_USE_xSLP (1 << 0)
+#define S3C64XX_SLPEN_CFG_BYSLPEN (1 << 1)
+
+#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
+
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "regs-gpio-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "regs-gpio-s3c64xx.h"
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ */
+
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H
+
+#include <plat/map-s3c.h>
+
+/* interrupt controller */
+
+#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ)
+#define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_EINTREG(x) ((x) + S3C24XX_VA_GPIO2)
+
+#define S3C2410_SRCPND S3C2410_IRQREG(0x000)
+#define S3C2410_INTMOD S3C2410_IRQREG(0x004)
+#define S3C2410_INTMSK S3C2410_IRQREG(0x008)
+#define S3C2410_PRIORITY S3C2410_IRQREG(0x00C)
+#define S3C2410_INTPND S3C2410_IRQREG(0x010)
+#define S3C2410_INTOFFSET S3C2410_IRQREG(0x014)
+#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018)
+#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C)
+
+#define S3C2416_PRIORITY_MODE1 S3C2410_IRQREG(0x030)
+#define S3C2416_PRIORITY_UPDATE1 S3C2410_IRQREG(0x034)
+#define S3C2416_SRCPND2 S3C2410_IRQREG(0x040)
+#define S3C2416_INTMOD2 S3C2410_IRQREG(0x044)
+#define S3C2416_INTMSK2 S3C2410_IRQREG(0x048)
+#define S3C2416_INTPND2 S3C2410_IRQREG(0x050)
+#define S3C2416_INTOFFSET2 S3C2410_IRQREG(0x054)
+#define S3C2416_PRIORITY_MODE2 S3C2410_IRQREG(0x070)
+#define S3C2416_PRIORITY_UPDATE2 S3C2410_IRQREG(0x074)
+
+/* mask: 0=enable, 1=disable
+ * 1 bit EINT, 4=EINT4, 23=EINT23
+ * EINT0,1,2,3 are not handled here.
+*/
+
+#define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4)
+#define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8)
+#define S3C2412_EINTMASK S3C2410_EINTREG(0x0B4)
+#define S3C2412_EINTPEND S3C2410_EINTREG(0X0B8)
+
+#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x0A4)
+#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X0A8)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - IRQ register definitions
+ */
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+
+#endif /* __ASM_ARCH_6400_REGS_IRQ_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "regs-irq-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "regs-irq-s3c64xx.h"
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C2443 clock register definitions
+ */
+
+#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
+#define __ASM_ARM_REGS_S3C2443_CLOCK
+
+#include <linux/delay.h>
+#include <plat/map-s3c.h>
+
+#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2443_PLLCON_MDIVSHIFT 16
+#define S3C2443_PLLCON_PDIVSHIFT 8
+#define S3C2443_PLLCON_SDIVSHIFT 0
+#define S3C2443_PLLCON_MDIVMASK ((1<<(1+(23-16)))-1)
+#define S3C2443_PLLCON_PDIVMASK ((1<<(1+(9-8)))-1)
+#define S3C2443_PLLCON_SDIVMASK (3)
+
+#define S3C2443_MPLLCON S3C2443_CLKREG(0x10)
+#define S3C2443_EPLLCON S3C2443_CLKREG(0x18)
+#define S3C2443_CLKSRC S3C2443_CLKREG(0x20)
+#define S3C2443_CLKDIV0 S3C2443_CLKREG(0x24)
+#define S3C2443_CLKDIV1 S3C2443_CLKREG(0x28)
+#define S3C2443_HCLKCON S3C2443_CLKREG(0x30)
+#define S3C2443_PCLKCON S3C2443_CLKREG(0x34)
+#define S3C2443_SCLKCON S3C2443_CLKREG(0x38)
+#define S3C2443_PWRMODE S3C2443_CLKREG(0x40)
+#define S3C2443_SWRST S3C2443_CLKREG(0x44)
+#define S3C2443_BUSPRI0 S3C2443_CLKREG(0x50)
+#define S3C2443_SYSID S3C2443_CLKREG(0x5C)
+#define S3C2443_PWRCFG S3C2443_CLKREG(0x60)
+#define S3C2443_RSTCON S3C2443_CLKREG(0x64)
+#define S3C2443_PHYCTRL S3C2443_CLKREG(0x80)
+#define S3C2443_PHYPWR S3C2443_CLKREG(0x84)
+#define S3C2443_URSTCON S3C2443_CLKREG(0x88)
+#define S3C2443_UCLKCON S3C2443_CLKREG(0x8C)
+
+#define S3C2443_PLLCON_OFF (1<<24)
+
+#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<7)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<7)
+#define S3C2443_CLKSRC_EPLLREF_MASK (3<<7)
+
+#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3)
+
+#define S3C2443_CLKDIV0_HALF_HCLK (1<<3)
+#define S3C2443_CLKDIV0_HALF_PCLK (1<<2)
+
+#define S3C2443_CLKDIV0_HCLKDIV_MASK (3<<0)
+
+#define S3C2443_CLKDIV0_EXTDIV_MASK (3<<6)
+#define S3C2443_CLKDIV0_EXTDIV_SHIFT (6)
+
+#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4)
+#define S3C2443_CLKDIV0_PREDIV_SHIFT (4)
+
+#define S3C2416_CLKDIV0_ARMDIV_MASK (7 << 9)
+#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9)
+#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9)
+#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9)
+#define S3C2443_CLKDIV0_ARMDIV_2 (8<<9)
+#define S3C2443_CLKDIV0_ARMDIV_3 (2<<9)
+#define S3C2443_CLKDIV0_ARMDIV_4 (9<<9)
+#define S3C2443_CLKDIV0_ARMDIV_6 (10<<9)
+#define S3C2443_CLKDIV0_ARMDIV_8 (11<<9)
+#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9)
+#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9)
+
+/* S3C2443_CLKDIV1 removed, only used in clock.c code */
+
+#define S3C2443_CLKCON_NAND
+
+#define S3C2443_HCLKCON_DMA0 (1<<0)
+#define S3C2443_HCLKCON_DMA1 (1<<1)
+#define S3C2443_HCLKCON_DMA2 (1<<2)
+#define S3C2443_HCLKCON_DMA3 (1<<3)
+#define S3C2443_HCLKCON_DMA4 (1<<4)
+#define S3C2443_HCLKCON_DMA5 (1<<5)
+#define S3C2443_HCLKCON_CAMIF (1<<8)
+#define S3C2443_HCLKCON_LCDC (1<<9)
+#define S3C2443_HCLKCON_USBH (1<<11)
+#define S3C2443_HCLKCON_USBD (1<<12)
+#define S3C2416_HCLKCON_HSMMC0 (1<<15)
+#define S3C2443_HCLKCON_HSMMC (1<<16)
+#define S3C2443_HCLKCON_CFC (1<<17)
+#define S3C2443_HCLKCON_SSMC (1<<18)
+#define S3C2443_HCLKCON_DRAMC (1<<19)
+
+#define S3C2443_PCLKCON_UART0 (1<<0)
+#define S3C2443_PCLKCON_UART1 (1<<1)
+#define S3C2443_PCLKCON_UART2 (1<<2)
+#define S3C2443_PCLKCON_UART3 (1<<3)
+#define S3C2443_PCLKCON_IIC (1<<4)
+#define S3C2443_PCLKCON_SDI (1<<5)
+#define S3C2443_PCLKCON_HSSPI (1<<6)
+#define S3C2443_PCLKCON_ADC (1<<7)
+#define S3C2443_PCLKCON_AC97 (1<<8)
+#define S3C2443_PCLKCON_IIS (1<<9)
+#define S3C2443_PCLKCON_PWMT (1<<10)
+#define S3C2443_PCLKCON_WDT (1<<11)
+#define S3C2443_PCLKCON_RTC (1<<12)
+#define S3C2443_PCLKCON_GPIO (1<<13)
+#define S3C2443_PCLKCON_SPI0 (1<<14)
+#define S3C2443_PCLKCON_SPI1 (1<<15)
+
+#define S3C2443_SCLKCON_DDRCLK (1<<16)
+#define S3C2443_SCLKCON_SSMCCLK (1<<15)
+#define S3C2443_SCLKCON_HSSPICLK (1<<14)
+#define S3C2443_SCLKCON_HSMMCCLK_EXT (1<<13)
+#define S3C2443_SCLKCON_HSMMCCLK_EPLL (1<<12)
+#define S3C2443_SCLKCON_CAMCLK (1<<11)
+#define S3C2443_SCLKCON_DISPCLK (1<<10)
+#define S3C2443_SCLKCON_I2SCLK (1<<9)
+#define S3C2443_SCLKCON_UARTCLK (1<<8)
+#define S3C2443_SCLKCON_USBHOST (1<<1)
+
+#define S3C2443_PWRCFG_SLEEP (1<<15)
+
+#define S3C2443_PWRCFG_USBPHY (1 << 4)
+
+#define S3C2443_URSTCON_FUNCRST (1 << 2)
+#define S3C2443_URSTCON_PHYRST (1 << 0)
+
+#define S3C2443_PHYCTRL_CLKSEL (1 << 3)
+#define S3C2443_PHYCTRL_EXTCLK (1 << 2)
+#define S3C2443_PHYCTRL_PLLSEL (1 << 1)
+#define S3C2443_PHYCTRL_DSPORT (1 << 0)
+
+#define S3C2443_PHYPWR_COMMON_ON (1 << 31)
+#define S3C2443_PHYPWR_ANALOG_PD (1 << 4)
+#define S3C2443_PHYPWR_PLL_REFCLK (1 << 3)
+#define S3C2443_PHYPWR_XO_ON (1 << 2)
+#define S3C2443_PHYPWR_PLL_PWRDN (1 << 1)
+#define S3C2443_PHYPWR_FSUSPEND (1 << 0)
+
+#define S3C2443_UCLKCON_DETECT_VBUS (1 << 31)
+#define S3C2443_UCLKCON_FUNC_CLKEN (1 << 2)
+#define S3C2443_UCLKCON_TCLKEN (1 << 0)
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
+{
+ unsigned int mdiv, pdiv, sdiv;
+ uint64_t fvco;
+
+ mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+ pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+ sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+ mdiv &= S3C2443_PLLCON_MDIVMASK;
+ pdiv &= S3C2443_PLLCON_PDIVMASK;
+ sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+ fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
+ do_div(fvco, pdiv << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+static inline unsigned int
+s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
+{
+ unsigned int mdiv, pdiv, sdiv;
+ uint64_t fvco;
+
+ mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+ pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+ sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+ mdiv &= S3C2443_PLLCON_MDIVMASK;
+ pdiv &= S3C2443_PLLCON_PDIVMASK;
+ sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+ fvco = (uint64_t)baseclk * (mdiv + 8);
+ do_div(fvco, (pdiv + 2) << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+static inline void s3c_hsudc_init_phy(void)
+{
+ u32 cfg;
+
+ cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
+ writel(cfg, S3C2443_PWRCFG);
+
+ cfg = readl(S3C2443_URSTCON);
+ cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+ writel(cfg, S3C2443_URSTCON);
+ mdelay(1);
+
+ cfg = readl(S3C2443_URSTCON);
+ cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+ writel(cfg, S3C2443_URSTCON);
+
+ cfg = readl(S3C2443_PHYCTRL);
+ cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
+ cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
+ writel(cfg, S3C2443_PHYCTRL);
+
+ cfg = readl(S3C2443_PHYPWR);
+ cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
+ S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
+ S3C2443_PHYPWR_ANALOG_PD);
+ cfg |= S3C2443_PHYPWR_COMMON_ON;
+ writel(cfg, S3C2443_PHYPWR);
+
+ cfg = readl(S3C2443_UCLKCON);
+ cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
+ S3C2443_UCLKCON_TCLKEN);
+ writel(cfg, S3C2443_UCLKCON);
+}
+
+static inline void s3c_hsudc_uninit_phy(void)
+{
+ u32 cfg;
+
+ cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
+ writel(cfg, S3C2443_PWRCFG);
+
+ writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
+
+ cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
+ writel(cfg, S3C2443_UCLKCON);
+}
+
+#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */
+
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * Samsung RTC Controller core functions
+ */
+
+#ifndef __RTC_CORE_S3C24XX_H
+#define __RTC_CORE_S3C24XX_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+extern struct platform_device s3c_device_rtc;
+
+/* re-define device name depending on support. */
+static inline void s3c_rtc_setname(char *name)
+{
+ s3c_device_rtc.name = name;
+}
+
+#endif /* __RTC_CORE_S3C24XX_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H
+#define __ARCH_ARM_MACH_S3C24XX_S3C2412_H __FILE__
+
+#include <plat/map-s3c.h>
+
+#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
+
+#define S3C2412_REFRESH S3C2412_MEMREG(0x10)
+
+#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x4)
+
+#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x0)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Samsung ADC Controller core functions
+ */
+
+#ifndef __ASM_PLAT_ADC_CORE_H
+#define __ASM_PLAT_ADC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_adc_setname(char *name)
+{
+#if defined(CONFIG_SAMSUNG_DEV_ADC) || defined(CONFIG_PLAT_S3C24XX)
+ s3c_device_adc.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ADC_CORE_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung CPU support
+ */
+
+/* todo - fix when rmk changes iodescs to use `void __iomem *` */
+
+#ifndef __SAMSUNG_PLAT_CPU_H
+#define __SAMSUNG_PLAT_CPU_H
+
+extern unsigned long samsung_cpu_id;
+
+#define S3C2410_CPU_ID 0x32410000
+#define S3C2410_CPU_MASK 0xFFFFFFFF
+
+#define S3C24XX_CPU_ID 0x32400000
+#define S3C24XX_CPU_MASK 0xFFF00000
+
+#define S3C2412_CPU_ID 0x32412000
+#define S3C2412_CPU_MASK 0xFFFFF000
+
+#define S3C6400_CPU_ID 0x36400000
+#define S3C6410_CPU_ID 0x36410000
+#define S3C64XX_CPU_MASK 0xFFFFF000
+
+#define S5PV210_CPU_ID 0x43110000
+#define S5PV210_CPU_MASK 0xFFFFF000
+
+#define IS_SAMSUNG_CPU(name, id, mask) \
+static inline int is_samsung_##name(void) \
+{ \
+ return ((samsung_cpu_id & mask) == (id & mask)); \
+}
+
+IS_SAMSUNG_CPU(s3c2410, S3C2410_CPU_ID, S3C2410_CPU_MASK)
+IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+ defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
+ defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
+ defined(CONFIG_CPU_S3C2443)
+# define soc_is_s3c24xx() is_samsung_s3c24xx()
+# define soc_is_s3c2410() is_samsung_s3c2410()
+#else
+# define soc_is_s3c24xx() 0
+# define soc_is_s3c2410() 0
+#endif
+
+#if defined(CONFIG_CPU_S3C2412)
+# define soc_is_s3c2412() is_samsung_s3c2412()
+#else
+# define soc_is_s3c2412() 0
+#endif
+
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c6400() is_samsung_s3c6400()
+# define soc_is_s3c6410() is_samsung_s3c6410()
+# define soc_is_s3c64xx() (is_samsung_s3c6400() || is_samsung_s3c6410())
+#else
+# define soc_is_s3c6400() 0
+# define soc_is_s3c6410() 0
+# define soc_is_s3c64xx() 0
+#endif
+
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+
+#ifndef KHZ
+#define KHZ (1000)
+#endif
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000)
+
+/* forward declaration */
+struct s3c24xx_uart_resources;
+struct platform_device;
+struct s3c2410_uartcfg;
+struct map_desc;
+
+/* per-cpu initialisation function table. */
+
+struct cpu_table {
+ unsigned long idcode;
+ unsigned long idmask;
+ void (*map_io)(void);
+ void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
+ void (*init_clocks)(int xtal);
+ int (*init)(void);
+ const char *name;
+};
+
+extern void s3c_init_cpu(unsigned long idcode,
+ struct cpu_table *cpus, unsigned int cputab_size);
+
+/* core initialisation functions */
+
+extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
+
+extern void s3c64xx_init_cpu(void);
+
+extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c24xx_init_clocks(int xtal);
+
+extern void s3c24xx_init_uartdevs(char *name,
+ struct s3c24xx_uart_resources *res,
+ struct s3c2410_uartcfg *cfg, int no);
+
+extern struct syscore_ops s3c2410_pm_syscore_ops;
+extern struct syscore_ops s3c2412_pm_syscore_ops;
+extern struct syscore_ops s3c2416_pm_syscore_ops;
+extern struct syscore_ops s3c244x_pm_syscore_ops;
+
+extern struct bus_type s3c6410_subsys;
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 standard platform devices
+ */
+
+#ifndef __PLAT_DEVS_H
+#define __PLAT_DEVS_H __FILE__
+
+#include <linux/platform_device.h>
+
+struct s3c24xx_uart_resources {
+ struct resource *resources;
+ unsigned long nr_resources;
+};
+
+extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
+
+extern struct platform_device *s3c24xx_uart_devs[];
+extern struct platform_device *s3c24xx_uart_src[];
+
+extern struct platform_device s3c64xx_device_ac97;
+extern struct platform_device s3c64xx_device_iis0;
+extern struct platform_device s3c64xx_device_iis1;
+extern struct platform_device s3c64xx_device_iisv4;
+extern struct platform_device s3c64xx_device_onenand1;
+extern struct platform_device s3c64xx_device_pcm0;
+extern struct platform_device s3c64xx_device_pcm1;
+extern struct platform_device s3c64xx_device_spi0;
+extern struct platform_device s3c64xx_device_spi1;
+extern struct platform_device s3c64xx_device_spi2;
+
+extern struct platform_device s3c_device_adc;
+extern struct platform_device s3c_device_cfcon;
+extern struct platform_device s3c_device_fb;
+extern struct platform_device s3c_device_hwmon;
+extern struct platform_device s3c_device_hsmmc0;
+extern struct platform_device s3c_device_hsmmc1;
+extern struct platform_device s3c_device_hsmmc2;
+extern struct platform_device s3c_device_hsmmc3;
+extern struct platform_device s3c_device_i2c0;
+extern struct platform_device s3c_device_i2c1;
+extern struct platform_device s3c_device_i2c2;
+extern struct platform_device s3c_device_i2c3;
+extern struct platform_device s3c_device_i2c4;
+extern struct platform_device s3c_device_i2c5;
+extern struct platform_device s3c_device_i2c6;
+extern struct platform_device s3c_device_i2c7;
+extern struct platform_device s3c_device_iis;
+extern struct platform_device s3c_device_lcd;
+extern struct platform_device s3c_device_nand;
+extern struct platform_device s3c_device_ohci;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_rtc;
+extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_spi0;
+extern struct platform_device s3c_device_spi1;
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_timer[];
+extern struct platform_device s3c_device_usbgadget;
+extern struct platform_device s3c_device_usb_hsotg;
+extern struct platform_device s3c_device_usb_hsudc;
+extern struct platform_device s3c_device_wdt;
+
+extern struct platform_device samsung_asoc_idma;
+extern struct platform_device samsung_device_keypad;
+extern struct platform_device samsung_device_pwm;
+
+/* s3c2440 specific devices */
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
+
+#endif
+
+/**
+ * s3c_set_platdata() - helper for setting platform data
+ * @pd: The default platform data for this device.
+ * @pdsize: The size of the platform data.
+ * @pdev: Pointer to the device to fill in.
+ *
+ * This helper replaces a number of calls that copy and then set the
+ * platform data of the device.
+ */
+extern void *s3c_set_platdata(void *pd, size_t pdsize,
+ struct platform_device *pdev);
+
+#endif /* __PLAT_DEVS_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - FB platform data definitions
+ */
+
+#ifndef __PLAT_S3C_FB_H
+#define __PLAT_S3C_FB_H __FILE__
+
+#include <linux/platform_data/video_s3c.h>
+
+/**
+ * s3c_fb_set_platdata() - Setup the FB device with platform data.
+ * @pd: The platform data to set. The data is copied from the passed structure
+ * so the machine data can mark the data __initdata so that any unused
+ * machines will end up dumping their data at runtime.
+ */
+extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
+
+/**
+ * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s3c64xx_fb_gpio_setup_24bpp(void);
+
+#endif /* __PLAT_S3C_FB_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung Platform - GPIO pin configuration helper definitions
+ */
+
+/* This is meant for core cpu support, machine or other driver files
+ * should not be including this header.
+ */
+
+#ifndef __PLAT_GPIO_CFG_HELPERS_H
+#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
+
+/* As a note, all gpio configuration functions are entered exclusively, either
+ * with the relevant lock held or the system prevented from doing anything else
+ * by disabling interrupts.
+*/
+
+static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int config)
+{
+ return (chip->config->set_config)(chip, off, config);
+}
+
+static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ return (chip->config->get_config)(chip, off);
+}
+
+static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ return (chip->config->set_pull)(chip, off, pull);
+}
+
+static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ return chip->config->get_pull(chip, off);
+}
+
+/* Pull-{up,down} resistor controls.
+ *
+ * S3C2410,S3C2440 = Pull-UP,
+ * S3C2412,S3C2413 = Pull-Down
+ * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
+ * S3C2443 = Pull-Both [not same as S3C6400]
+ */
+
+/**
+ * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-up resistor.
+ */
+extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull);
+
+/**
+ * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * @chip: The gpio chip that is being configured
+ * @off: The offset for the GPIO being configured
+ * @param: pull: The pull mode being requested
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-down resistor.
+ */
+extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull);
+
+/**
+ * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
+ * down or none
+ *
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ * 00 = No pull resistor connected
+ * 01 = Pull-up resistor connected
+ * 10 = Pull-down resistor connected
+ */
+extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull);
+
+/**
+ * samsung_gpio_getpull_updown() - Get configuration for choice of up,
+ * down or none
+ *
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor
+ * for the given GPIO in the same case as samsung_gpio_setpull_upown.
+*/
+extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+ unsigned int off);
+
+/**
+ * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-up resistor for the
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
+*/
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+ unsigned int off);
+
+/**
+ * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-down resistor for the
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
+*/
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+ unsigned int off);
+
+/**
+ * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ * 00 = Pull-up resistor connected
+ * 10 = Pull-down resistor connected
+ * x1 = No pull up resistor
+ */
+extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull);
+
+/**
+ * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
+ * @chip: The gpio chip that the GPIO pin belongs to.
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as samsung_gpio_setpull_upown.
+*/
+extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
+ unsigned int off);
+
+#endif /* __PLAT_GPIO_CFG_HELPERS_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration
+ */
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+/* Note, this interface is being added to the s3c64xx arch first and will
+ * be added to the s3c24xx systems later.
+ */
+
+#ifndef __PLAT_GPIO_CFG_H
+#define __PLAT_GPIO_CFG_H __FILE__
+
+#include <linux/types.h>
+
+typedef unsigned int __bitwise samsung_gpio_pull_t;
+
+/* forward declaration if gpio-core.h hasn't been included */
+struct samsung_gpio_chip;
+
+/**
+ * struct samsung_gpio_cfg GPIO configuration
+ * @cfg_eint: Configuration setting when used for external interrupt source
+ * @get_pull: Read the current pull configuration for the GPIO
+ * @set_pull: Set the current pull configuration for the GPIO
+ * @set_config: Set the current configuration for the GPIO
+ * @get_config: Read the current configuration for the GPIO
+ *
+ * Each chip can have more than one type of GPIO bank available and some
+ * have different capabilites even when they have the same control register
+ * layouts. Provide an point to vector control routine and provide any
+ * per-bank configuration information that other systems such as the
+ * external interrupt code will need.
+ *
+ * @sa samsung_gpio_cfgpin
+ * @sa s3c_gpio_getcfg
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_getpull
+ */
+struct samsung_gpio_cfg {
+ unsigned int cfg_eint;
+
+ samsung_gpio_pull_t (*get_pull)(struct samsung_gpio_chip *chip, unsigned offs);
+ int (*set_pull)(struct samsung_gpio_chip *chip, unsigned offs,
+ samsung_gpio_pull_t pull);
+
+ unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs);
+ int (*set_config)(struct samsung_gpio_chip *chip, unsigned offs,
+ unsigned config);
+};
+
+#define S3C_GPIO_SPECIAL_MARK (0xfffffff0)
+#define S3C_GPIO_SPECIAL(x) (S3C_GPIO_SPECIAL_MARK | (x))
+
+/* Defines for generic pin configurations */
+#define S3C_GPIO_INPUT (S3C_GPIO_SPECIAL(0))
+#define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1))
+#define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x))
+
+#define samsung_gpio_is_cfg_special(_cfg) \
+ (((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
+
+/**
+ * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
+ * @pin pin The pin number to configure.
+ * @to to The configuration for the pin's function.
+ *
+ * Configure which function is actually connected to the external
+ * pin, such as an gpio input, output or some form of special function
+ * connected to an internal peripheral block.
+ *
+ * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
+ * or S3C_GPIO_SFN() to indicate one of the possible values that the helper
+ * will then generate the correct bit mask and shift for the configuration.
+ *
+ * If a bank of GPIOs all needs to be set to special-function 2, then
+ * the following code will work:
+ *
+ * for (gpio = start; gpio < end; gpio++)
+ * s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ *
+ * The @to parameter can also be a specific value already shifted to the
+ * correct position in the control register, although these are discouraged
+ * in newer kernels and are only being kept for compatibility.
+ */
+extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
+
+/**
+ * s3c_gpio_getcfg - Read the current function for a GPIO pin
+ * @pin: The pin to read the configuration value for.
+ *
+ * Read the configuration state of the given @pin, returning a value that
+ * could be passed back to s3c_gpio_cfgpin().
+ *
+ * @sa s3c_gpio_cfgpin
+ */
+extern unsigned s3c_gpio_getcfg(unsigned int pin);
+
+/**
+ * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
+ * @start: The pin number to start at
+ * @nr: The number of pins to configure from @start.
+ * @cfg: The configuration for the pin's function
+ *
+ * Call s3c_gpio_cfgpin() for the @nr pins starting at @start.
+ *
+ * @sa s3c_gpio_cfgpin.
+ */
+extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+ unsigned int cfg);
+
+/* Define values for the pull-{up,down} available for each gpio pin.
+ *
+ * These values control the state of the weak pull-{up,down} resistors
+ * available on most pins on the S3C series. Not all chips support both
+ * up or down settings, and it may be dependent on the chip that is being
+ * used to whether the particular mode is available.
+ */
+#define S3C_GPIO_PULL_NONE ((__force samsung_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN ((__force samsung_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP ((__force samsung_gpio_pull_t)0x02)
+
+/**
+ * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
+ * @pin: The pin number to configure the pull resistor.
+ * @pull: The configuration for the pull resistor.
+ *
+ * This function sets the state of the pull-{up,down} resistor for the
+ * specified pin. It will return 0 if successful, or a negative error
+ * code if the pin cannot support the requested pull setting.
+ *
+ * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
+*/
+extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the pull resistor value for the specified pin.
+*/
+extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+
+/* configure `all` aspects of an gpio */
+
+/**
+ * s3c_gpio_cfgall_range() - configure range of gpio functtion and pull.
+ * @start: The gpio number to start at.
+ * @nr: The number of gpio to configure from @start.
+ * @cfg: The configuration to use
+ * @pull: The pull setting to use.
+ *
+ * Run s3c_gpio_cfgpin() and s3c_gpio_setpull() over the gpio range starting
+ * @gpio and running for @size.
+ *
+ * @sa s3c_gpio_cfgpin
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_cfgpin_range
+ */
+extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+ unsigned int cfg, samsung_gpio_pull_t pull);
+
+static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
+ unsigned int cfg)
+{
+ return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE);
+}
+
+#endif /* __PLAT_GPIO_CFG_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO core
+ */
+
+#ifndef __PLAT_SAMSUNG_GPIO_CORE_H
+#define __PLAT_SAMSUNG_GPIO_CORE_H
+
+/* Bring in machine-local definitions, especially S3C_GPIO_END */
+#include <mach/gpio-samsung.h>
+#include <linux/gpio/driver.h>
+
+#define GPIOCON_OFF (0x00)
+#define GPIODAT_OFF (0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
+/* Define the core gpiolib support functions that the s3c platforms may
+ * need to extend or change depending on the hardware and the s3c chip
+ * selected at build or found at run time.
+ *
+ * These definitions are not intended for driver inclusion, there is
+ * nothing here that should not live outside the platform and core
+ * specific code.
+*/
+
+struct samsung_gpio_chip;
+
+/**
+ * struct samsung_gpio_pm - power management (suspend/resume) information
+ * @save: Routine to save the state of the GPIO block
+ * @resume: Routine to resume the GPIO block.
+ */
+struct samsung_gpio_pm {
+ void (*save)(struct samsung_gpio_chip *chip);
+ void (*resume)(struct samsung_gpio_chip *chip);
+};
+
+struct samsung_gpio_cfg;
+
+/**
+ * struct samsung_gpio_chip - wrapper for specific implementation of gpio
+ * @chip: The chip structure to be exported via gpiolib.
+ * @base: The base pointer to the gpio configuration registers.
+ * @group: The group register number for gpio interrupt support.
+ * @irq_base: The base irq number.
+ * @config: special function and pull-resistor control information.
+ * @lock: Lock for exclusive access to this gpio bank.
+ * @pm_save: Save information for suspend/resume support.
+ * @bitmap_gpio_int: Bitmap for representing GPIO interrupt or not.
+ *
+ * This wrapper provides the necessary information for the Samsung
+ * specific gpios being registered with gpiolib.
+ *
+ * The lock protects each gpio bank from multiple access of the shared
+ * configuration registers, or from reading of data whilst another thread
+ * is writing to the register set.
+ *
+ * Each chip has its own lock to avoid any contention between different
+ * CPU cores trying to get one lock for different GPIO banks, where each
+ * bank of GPIO has its own register space and configuration registers.
+ */
+struct samsung_gpio_chip {
+ struct gpio_chip chip;
+ struct samsung_gpio_cfg *config;
+ struct samsung_gpio_pm *pm;
+ void __iomem *base;
+ int irq_base;
+ int group;
+ spinlock_t lock;
+#ifdef CONFIG_PM
+ u32 pm_save[4];
+#endif
+ u32 bitmap_gpio_int;
+};
+
+static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
+{
+ return container_of(gpc, struct samsung_gpio_chip, chip);
+}
+
+/**
+ * samsung_gpiolib_to_irq - convert gpio pin to irq number
+ * @chip: The gpio chip that the pin belongs to.
+ * @offset: The offset of the pin in the chip.
+ *
+ * This helper returns the irq number calculated from the chip->irq_base and
+ * the provided offset.
+ */
+extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
+
+/* exported for core SoC support to change */
+extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip)
+{
+ return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
+}
+#else
+/* machine specific code should provide samsung_gpiolib_getchip */
+
+extern struct samsung_gpio_chip s3c24xx_gpios[];
+
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
+{
+ struct samsung_gpio_chip *chip;
+
+ if (pin > S3C_GPIO_END)
+ return NULL;
+
+ chip = &s3c24xx_gpios[pin/32];
+ return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
+}
+
+static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
+#endif
+
+#ifdef CONFIG_PM
+extern struct samsung_gpio_pm samsung_gpio_pm_1bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_2bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_4bit;
+#define __gpio_pm(x) x
+#else
+#define samsung_gpio_pm_1bit NULL
+#define samsung_gpio_pm_2bit NULL
+#define samsung_gpio_pm_4bit NULL
+#define __gpio_pm(x) NULL
+
+#endif /* CONFIG_PM */
+
+/* locking wrappers to deal with multiple access to the same gpio bank */
+#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
+#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
+
+#endif /* __PLAT_SAMSUNG_GPIO_CORE_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - I2C Controller core functions
+ */
+
+#ifndef __ASM_ARCH_IIC_CORE_H
+#define __ASM_ARCH_IIC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_i2c0_setname(char *name)
+{
+ /* currently this device is always compiled in */
+ s3c_device_i2c0.name = name;
+}
+
+static inline void s3c_i2c1_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C1
+ s3c_device_i2c1.name = name;
+#endif
+}
+
+static inline void s3c_i2c2_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C2
+ s3c_device_i2c2.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_IIC_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Samsung Platform - Keypad platform data definitions
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ */
+
+#ifndef __PLAT_SAMSUNG_KEYPAD_H
+#define __PLAT_SAMSUNG_KEYPAD_H
+
+#include <linux/input/samsung-keypad.h>
+
+/**
+ * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with Samsung Keypad device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd);
+
+/* defined by architecture to configure gpio. */
+extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
+
+#endif /* __PLAT_SAMSUNG_KEYPAD_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2003, 2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - Memory map definitions (virtual addresses)
+ */
+
+#ifndef __ASM_PLAT_MAP_H
+#define __ASM_PLAT_MAP_H __FILE__
+
+/* Fit all our registers in at 0xF6000000 upwards, trying to use as
+ * little of the VA space as possible so vmalloc and friends have a
+ * better chance of getting memory.
+ *
+ * we try to ensure stuff like the IRQ registers are available for
+ * an single MOVS instruction (ie, only 8 bits of set data)
+ */
+
+#define S3C_ADDR_BASE 0xF6000000
+
+#ifndef __ASSEMBLY__
+#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x))
+#else
+#define S3C_ADDR(x) (S3C_ADDR_BASE + (x))
+#endif
+
+#define S3C_VA_IRQ S3C_ADDR(0x00000000) /* irq controller(s) */
+#define S3C_VA_SYS S3C_ADDR(0x00100000) /* system control */
+#define S3C_VA_MEM S3C_ADDR(0x00200000) /* memory control */
+#define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */
+#define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */
+#define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */
+
+/* This is used for the CPU specific mappings that may be needed, so that
+ * they do not need to directly used S3C_ADDR() and thus make it easier to
+ * modify the space for mapping.
+ */
+#define S3C_ADDR_CPU(x) S3C_ADDR(0x00500000 + (x))
+
+#endif /* __ASM_PLAT_MAP_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Memory map definitions
+ */
+
+#ifndef __ASM_PLAT_MAP_S3C_H
+#define __ASM_PLAT_MAP_S3C_H __FILE__
+
+#include <mach/map.h>
+
+#define S3C24XX_VA_IRQ S3C_VA_IRQ
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C24XX_VA_UART S3C_VA_UART
+
+#define S3C24XX_VA_TIMER S3C_VA_TIMER
+#define S3C24XX_VA_CLKPWR S3C_VA_SYS
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+
+#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000)
+
+#define S3C2410_PA_UART (0x50000000)
+#define S3C24XX_PA_UART S3C2410_PA_UART
+
+/*
+ * GPIO ports
+ *
+ * the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 mapping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO (0x56000000)
+#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
+
+#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
+
+#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
+#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
+
+#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
+
+#define S3C2410_ADDR(x) S3C_ADDR(x)
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#include <plat/map-s5p.h>
+
+#endif /* __ASM_PLAT_MAP_S3C_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P - Memory map definitions
+ */
+
+#ifndef __ASM_PLAT_MAP_S5P_H
+#define __ASM_PLAT_MAP_S5P_H __FILE__
+
+#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0 VA_VIC(0)
+#define VA_VIC1 VA_VIC(1)
+#define VA_VIC2 VA_VIC(2)
+#define VA_VIC3 VA_VIC(3)
+
+#include <plat/map-s3c.h>
+
+#endif /* __ASM_PLAT_MAP_S5P_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Tomasz Figa <t.figa@samsung.com>
+ * Copyright (c) 2004 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Written by Ben Dooks, <ben@simtec.co.uk>
+ */
+
+#ifndef __PLAT_SAMSUNG_PM_COMMON_H
+#define __PLAT_SAMSUNG_PM_COMMON_H __FILE__
+
+#include <linux/irq.h>
+#include <linux/soc/samsung/s3c-pm.h>
+
+/* sleep save info */
+
+/**
+ * struct sleep_save - save information for shared peripherals.
+ * @reg: Pointer to the register to save.
+ * @val: Holder for the value saved from reg.
+ *
+ * This describes a list of registers which is used by the pm core and
+ * other subsystem to save and restore register values over suspend.
+ */
+struct sleep_save {
+ void __iomem *reg;
+ unsigned long val;
+};
+
+#define SAVE_ITEM(x) \
+ { .reg = (x) }
+
+/* helper functions to save/restore lists of registers. */
+
+extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2004 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Written by Ben Dooks, <ben@simtec.co.uk>
+ */
+
+/* s3c_pm_init
+ *
+ * called from board at initialisation time to setup the power
+ * management
+*/
+
+#include <plat/pm-common.h>
+
+struct device;
+
+#ifdef CONFIG_SAMSUNG_PM
+
+extern __init int s3c_pm_init(void);
+extern __init int s3c64xx_pm_init(void);
+
+#else
+
+static inline int s3c_pm_init(void)
+{
+ return 0;
+}
+
+static inline int s3c64xx_pm_init(void)
+{
+ return 0;
+}
+#endif
+
+/* configuration for the IRQ mask over sleep */
+extern unsigned long s3c_irqwake_intmask;
+extern unsigned long s3c_irqwake_eintmask;
+
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern int (*pm_cpu_sleep)(unsigned long);
+
+/* Flags for PM Control */
+
+extern unsigned long s3c_pm_flags;
+
+/* from sleep.S */
+
+extern int s3c2410_cpu_suspend(unsigned long);
+
+#ifdef CONFIG_PM_SLEEP
+extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
+extern void s3c_cpu_resume(void);
+#else
+#define s3c_irq_wake NULL
+#define s3c_cpu_resume NULL
+#endif
+
+#ifdef CONFIG_SAMSUNG_PM
+extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
+#else
+#define s3c_irqext_wake NULL
+#endif
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+/**
+ * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
+ * @set: set bits for the state of the LEDs
+ * @clear: clear bits for the state of the LEDs.
+ */
+extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
+
+#else
+static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
+#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
+
+/**
+ * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
+ *
+ * Setup all the necessary GPIO pins for waking the system on external
+ * interrupt.
+ */
+extern void s3c_pm_configure_extint(void);
+
+#ifdef CONFIG_GPIO_SAMSUNG
+/**
+ * samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
+ *
+ * Restore the state of the GPIO pins after sleep, which may involve ensuring
+ * that we do not glitch the state of the pins from that the bootloader's
+ * resume code has done.
+*/
+extern void samsung_pm_restore_gpios(void);
+
+/**
+ * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
+ *
+ * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
+ */
+extern void samsung_pm_save_gpios(void);
+#else
+static inline void samsung_pm_restore_gpios(void) {}
+static inline void samsung_pm_save_gpios(void) {}
+#endif
+
+extern void s3c_pm_save_core(void);
+extern void s3c_pm_restore_core(void);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung PWM controller platform data helpers.
+ */
+
+#ifndef __ASM_ARCH_PWM_CORE_H
+#define __ASM_ARCH_PWM_CORE_H __FILE__
+
+#include <clocksource/samsung_pwm.h>
+
+#ifdef CONFIG_SAMSUNG_DEV_PWM
+extern void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd);
+#else
+static inline void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd) { }
+#endif
+
+#endif /* __ASM_ARCH_PWM_CORE_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2004 Shannon Holland <holland@loser.net>
+ *
+ * S3C2410 ADC registers
+ */
+
+#ifndef __ASM_ARCH_REGS_ADC_H
+#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
+
+#define S3C2410_ADCREG(x) (x)
+
+#define S3C2410_ADCCON S3C2410_ADCREG(0x00)
+#define S3C2410_ADCTSC S3C2410_ADCREG(0x04)
+#define S3C2410_ADCDLY S3C2410_ADCREG(0x08)
+#define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C)
+#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10)
+#define S3C64XX_ADCUPDN S3C2410_ADCREG(0x14)
+#define S3C2443_ADCMUX S3C2410_ADCREG(0x18)
+#define S3C64XX_ADCCLRINT S3C2410_ADCREG(0x18)
+#define S5P_ADCMUX S3C2410_ADCREG(0x1C)
+#define S3C64XX_ADCCLRINTPNDNUP S3C2410_ADCREG(0x20)
+
+
+/* ADCCON Register Bits */
+#define S3C64XX_ADCCON_RESSEL (1<<16)
+#define S3C2410_ADCCON_ECFLG (1<<15)
+#define S3C2410_ADCCON_PRSCEN (1<<14)
+#define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6)
+#define S3C2410_ADCCON_PRSCVLMASK (0xFF<<6)
+#define S3C2410_ADCCON_SELMUX(x) (((x)&0x7)<<3)
+#define S3C2410_ADCCON_MUXMASK (0x7<<3)
+#define S3C2416_ADCCON_RESSEL (1 << 3)
+#define S3C2410_ADCCON_STDBM (1<<2)
+#define S3C2410_ADCCON_READ_START (1<<1)
+#define S3C2410_ADCCON_ENABLE_START (1<<0)
+#define S3C2410_ADCCON_STARTMASK (0x3<<0)
+
+
+/* ADCTSC Register Bits */
+#define S3C2443_ADCTSC_UD_SEN (1 << 8)
+#define S3C2410_ADCTSC_YM_SEN (1<<7)
+#define S3C2410_ADCTSC_YP_SEN (1<<6)
+#define S3C2410_ADCTSC_XM_SEN (1<<5)
+#define S3C2410_ADCTSC_XP_SEN (1<<4)
+#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3)
+#define S3C2410_ADCTSC_AUTO_PST (1<<2)
+#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0)
+
+/* ADCDAT0 Bits */
+#define S3C2410_ADCDAT0_UPDOWN (1<<15)
+#define S3C2410_ADCDAT0_AUTO_PST (1<<14)
+#define S3C2410_ADCDAT0_XY_PST (0x3<<12)
+#define S3C2410_ADCDAT0_XPDATA_MASK (0x03FF)
+
+/* ADCDAT1 Bits */
+#define S3C2410_ADCDAT1_UPDOWN (1<<15)
+#define S3C2410_ADCDAT1_AUTO_PST (1<<14)
+#define S3C2410_ADCDAT1_XY_PST (0x3<<12)
+#define S3C2410_ADCDAT1_YPDATA_MASK (0x03FF)
+
+#endif /* __ASM_ARCH_REGS_ADC_H */
+
+
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C - IRQ detection types.
+ */
+
+/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including
+ * the S3C64XX
+*/
+#define S3C2410_EXTINT_LOWLEV (0x00)
+#define S3C2410_EXTINT_HILEV (0x01)
+#define S3C2410_EXTINT_FALLEDGE (0x02)
+#define S3C2410_EXTINT_RISEEDGE (0x04)
+#define S3C2410_EXTINT_BOTHEDGE (0x06)
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - SDHCI (HSMMC) platform data definitions
+ */
+
+#ifndef __PLAT_S3C_SDHCI_H
+#define __PLAT_S3C_SDHCI_H __FILE__
+
+#include <linux/platform_data/mmc-sdhci-s3c.h>
+#include <plat/devs.h>
+
+/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
+ * @pd: The default platform data for this device.
+ * @set: Pointer to the platform data to fill in.
+ */
+extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+ struct s3c_sdhci_platdata *set);
+
+/**
+ * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use withe S3C SDHCI device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd);
+
+/* Default platform data, exported so that per-cpu initialisation can
+ * set the correct one when there are more than one cpu type selected.
+*/
+
+extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
+
+/* Helper function availability */
+
+extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+
+/* S3C2416 SDHCI setup */
+
+#ifdef CONFIG_S3C2416_SETUP_SDHCI
+static inline void s3c2416_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+ s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
+#endif /* CONFIG_S3C_DEV_HSMMC */
+}
+
+static inline void s3c2416_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+ s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+}
+
+#else
+static inline void s3c2416_default_sdhci0(void) { }
+static inline void s3c2416_default_sdhci1(void) { }
+
+#endif /* CONFIG_S3C2416_SETUP_SDHCI */
+
+/* S3C64XX SDHCI setup */
+
+#ifdef CONFIG_S3C64XX_SETUP_SDHCI
+static inline void s3c6400_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+ s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+#endif
+}
+
+static inline void s3c6400_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+ s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+#endif
+}
+
+static inline void s3c6400_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+ s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+#endif
+}
+
+static inline void s3c6410_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+ s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+#endif
+}
+
+static inline void s3c6410_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+ s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+#endif
+}
+
+static inline void s3c6410_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+ s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+#endif
+}
+
+#else
+static inline void s3c6410_default_sdhci0(void) { }
+static inline void s3c6410_default_sdhci1(void) { }
+static inline void s3c6410_default_sdhci2(void) { }
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+static inline void s3c6400_default_sdhci2(void) { }
+
+#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
+
+static inline void s3c_sdhci_setname(int id, char *name)
+{
+ switch (id) {
+#ifdef CONFIG_S3C_DEV_HSMMC
+ case 0:
+ s3c_device_hsmmc0.name = name;
+ break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC1
+ case 1:
+ s3c_device_hsmmc1.name = name;
+ break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC2
+ case 2:
+ s3c_device_hsmmc2.name = name;
+ break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC3
+ case 3:
+ s3c_device_hsmmc3.name = name;
+ break;
+#endif
+ default:
+ break;
+ }
+}
+#endif /* __PLAT_S3C_SDHCI_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ */
+
+#ifndef __PLAT_SAMSUNG_USB_PHY_H
+#define __PLAT_SAMSUNG_USB_PHY_H __FILE__
+
+extern int s3c_usb_phy_init(struct platform_device *pdev, int type);
+extern int s3c_usb_phy_exit(struct platform_device *pdev, int type);
+
+#endif /* __PLAT_SAMSUNG_USB_PHY_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Support for wakeup mask interrupts on newer SoCs
+ */
+
+#ifndef __PLAT_WAKEUP_MASK_H
+#define __PLAT_WAKEUP_MASK_H __file__
+
+/* if no irq yet defined, but still want to mask */
+#define NO_WAKEUP_IRQ (0x90000000)
+
+/**
+ * struct samsung_wakeup_mask - wakeup mask information
+ * @irq: The interrupt associated with this wakeup.
+ * @bit: The bit, as a (1 << bitno) controlling this source.
+ */
+struct samsung_wakeup_mask {
+ unsigned int irq;
+ u32 bit;
+};
+
+/**
+ * samsung_sync_wakemask - sync wakeup mask information for pm
+ * @reg: The register that is used.
+ * @masks: The list of masks to use.
+ * @nr_masks: The number of entries pointed to buy @masks.
+ *
+ * Synchronise the wakeup mask information at suspend time from the list
+ * of interrupts and control bits in @masks. We do this at suspend time
+ * as overriding the relevant irq chips is harder and the register is only
+ * required to be correct before we enter sleep.
+ */
+extern void samsung_sync_wakemask(void __iomem *reg,
+ const struct samsung_wakeup_mask *masks,
+ int nr_masks);
+
+#endif /* __PLAT_WAKEUP_MASK_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// S3C series CPU initialisation
+
+/*
+ * NOTE: Code in this file is not used on S3C64xx when booting with
+ * Device Tree support.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+
+static struct cpu_table *cpu;
+
+static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
+ struct cpu_table *tab,
+ unsigned int count)
+{
+ for (; count != 0; count--, tab++) {
+ if ((idcode & tab->idmask) == (tab->idcode & tab->idmask))
+ return tab;
+ }
+
+ return NULL;
+}
+
+void __init s3c_init_cpu(unsigned long idcode,
+ struct cpu_table *cputab, unsigned int cputab_size)
+{
+ cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
+
+ if (cpu == NULL) {
+ printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
+ panic("Unknown S3C24XX CPU");
+ }
+
+ printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+
+ if (cpu->init == NULL) {
+ printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
+ panic("Unsupported Samsung CPU");
+ }
+
+ if (cpu->map_io)
+ cpu->map_io();
+}
+
+/* s3c24xx_init_clocks
+ *
+ * Initialise the clock subsystem and associated information from the
+ * given master crystal value.
+ *
+ * xtal = 0 -> use default PLL crystal value (normally 12MHz)
+ * != 0 -> PLL crystal value in Hz
+*/
+
+void __init s3c24xx_init_clocks(int xtal)
+{
+ if (xtal == 0)
+ xtal = 12*1000*1000;
+
+ if (cpu == NULL)
+ panic("s3c24xx_init_clocks: no cpu setup?\n");
+
+ if (cpu->init_clocks == NULL)
+ panic("s3c24xx_init_clocks: cpu has no clock init\n");
+ else
+ (cpu->init_clocks)(xtal);
+}
+
+/* uart management */
+#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
+static int nr_uarts __initdata = 0;
+
+#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
+static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
+#endif
+
+/* s3c24xx_init_uartdevs
+ *
+ * copy the specified platform data and configuration into our central
+ * set of devices, before the data is thrown away after the init process.
+ *
+ * This also fills in the array passed to the serial driver for the
+ * early initialisation of the console.
+*/
+
+void __init s3c24xx_init_uartdevs(char *name,
+ struct s3c24xx_uart_resources *res,
+ struct s3c2410_uartcfg *cfg, int no)
+{
+#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
+ struct platform_device *platdev;
+ struct s3c2410_uartcfg *cfgptr = uart_cfgs;
+ struct s3c24xx_uart_resources *resp;
+ int uart;
+
+ memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
+
+ for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
+ platdev = s3c24xx_uart_src[cfgptr->hwport];
+
+ resp = res + cfgptr->hwport;
+
+ s3c24xx_uart_devs[uart] = platdev;
+
+ platdev->name = name;
+ platdev->resource = resp->resources;
+ platdev->num_resources = resp->nr_resources;
+
+ platdev->dev.platform_data = cfgptr;
+ }
+
+ nr_uarts = no;
+#endif
+}
+
+void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ if (cpu == NULL)
+ return;
+
+ if (cpu->init_uarts == NULL && IS_ENABLED(CONFIG_SAMSUNG_ATAGS)) {
+ printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
+ } else
+ (cpu->init_uarts)(cfg, no);
+}
+#endif
+
+static int __init s3c_arch_init(void)
+{
+ int ret;
+
+ /* init is only needed for ATAGS based platforms */
+ if (!IS_ENABLED(CONFIG_ATAGS) ||
+ (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
+ return 0;
+
+ // do the correct init for cpu
+
+ if (cpu == NULL) {
+ /* Not needed when booting with device tree. */
+ if (of_have_populated_dt())
+ return 0;
+ panic("s3c_arch_init: NULL cpu\n");
+ }
+
+ ret = (cpu->init)();
+ if (ret != 0)
+ return ret;
+#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
+ ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
+#endif
+ return ret;
+}
+
+arch_initcall(s3c_arch_init);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006-2009 Simtec Electronics
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>
+//
+// S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+
+#include "regs-mem-s3c24xx.h"
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2410_iobank_timing *bt;
+ int bank;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = timings->bank[bank].io_2410;
+ if (!bt)
+ continue;
+
+ printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+ "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+ print_ns(bt->tacs),
+ print_ns(bt->tcos),
+ print_ns(bt->tacc),
+ print_ns(bt->tcoh),
+ print_ns(bt->tcah));
+ }
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+ return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+ return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+ if (cyc == 0)
+ return 0;
+
+ return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+ unsigned long *v, int shift)
+{
+ unsigned int div = to_div(cyc, hclk_tns);
+ unsigned long val;
+
+ s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+ __func__, cyc, hclk_tns, shift, div);
+
+ switch (div) {
+ case 0:
+ val = 0;
+ break;
+ case 1:
+ val = 1;
+ break;
+ case 2:
+ val = 2;
+ break;
+ case 3:
+ case 4:
+ val = 3;
+ break;
+ default:
+ return -1;
+ }
+
+ *v |= val << shift;
+ return 0;
+}
+
+static int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+ /* Currently no support for Tacp calculations. */
+ return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+ unsigned long hclk_tns, unsigned long *v)
+{
+ unsigned int div = to_div(cyc, hclk_tns);
+ unsigned long val;
+
+ s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+ __func__, cyc, nwait_en, hclk_tns, div);
+
+ /* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+ if (nwait_en && div < 4)
+ div = 4;
+
+ switch (div) {
+ case 0:
+ val = 0;
+ break;
+
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ val = div - 1;
+ break;
+
+ case 5:
+ case 6:
+ val = 4;
+ break;
+
+ case 7:
+ case 8:
+ val = 5;
+ break;
+
+ case 9:
+ case 10:
+ val = 6;
+ break;
+
+ case 11:
+ case 12:
+ case 13:
+ case 14:
+ val = 7;
+ break;
+
+ default:
+ return -1;
+ }
+
+ *v |= val << 8;
+ return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing information
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+ struct s3c2410_iobank_timing *bt)
+{
+ unsigned long hclk = cfg->freq.hclk_tns;
+ unsigned long res;
+ int ret;
+
+ res = bt->bankcon;
+ res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+ /* tacp: 2,3,4,5 */
+ /* tcah: 0,1,2,4 */
+ /* tcoh: 0,1,2,4 */
+ /* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+ /* tcos: 0,1,2,4 */
+ /* tacs: 0,1,2,4 */
+
+ ret = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+ ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+ ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+ ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+ if (ret)
+ return -EINVAL;
+
+ ret |= calc_tacp(bt->tacp, hclk, &res);
+ ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+ if (ret)
+ return -EINVAL;
+
+ bt->bankcon = res;
+ return 0;
+}
+
+static const unsigned int tacc_tab[] = {
+ [0] = 1,
+ [1] = 2,
+ [2] = 3,
+ [3] = 4,
+ [4] = 6,
+ [5] = 9,
+ [6] = 10,
+ [7] = 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+ unsigned long val)
+{
+ val &= 7;
+ return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+ unsigned long val)
+{
+ val &= 3;
+ return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+static void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+ struct s3c2410_iobank_timing *bt)
+{
+ unsigned long bankcon = bt->bankcon;
+ unsigned long hclk = cfg->freq.hclk_tns;
+
+ bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+ bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+ bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+ bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+ bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob)
+{
+ struct s3c2410_iobank_timing *bt = iob->io_2410;
+ unsigned long bankcon = bt->bankcon;
+ unsigned long hclk = cfg->freq.hclk_tns;
+ unsigned int tacs;
+ unsigned int tcos;
+ unsigned int tacc;
+ unsigned int tcoh;
+ unsigned int tcah;
+
+ seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+ tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+ tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+ tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+ tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+ tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+ seq_printf(seq,
+ "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+ print_ns(bt->tacs),
+ print_ns(bt->tcos),
+ print_ns(bt->tacc),
+ print_ns(bt->tcoh),
+ print_ns(bt->tcah));
+
+ seq_printf(seq,
+ "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+ print_ns(tacs),
+ print_ns(tcos),
+ print_ns(tacc),
+ print_ns(tcoh),
+ print_ns(tcah));
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2410_iobank_timing *bt;
+ unsigned long bankcon;
+ int bank;
+ int ret;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bankcon = __raw_readl(bank_reg(bank));
+ bt = iot->bank[bank].io_2410;
+
+ if (!bt)
+ continue;
+
+ bt->bankcon = bankcon;
+
+ ret = s3c2410_calc_bank(cfg, bt);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+ __func__, bank);
+ goto err;
+ }
+
+ s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+ __func__, bank, bt->bankcon);
+ }
+
+ return 0;
+ err:
+ return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2410_iobank_timing *bt;
+ int bank;
+
+ /* set the io timings from the specifier */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2410;
+ if (!bt)
+ continue;
+
+ __raw_writel(bt->bankcon, bank_reg(bank));
+ }
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configuration
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2410_iobank_timing *bt;
+ unsigned long bankcon;
+ unsigned long bwscon;
+ int bank;
+
+ bwscon = __raw_readl(S3C2410_BWSCON);
+
+ /* look through all banks to see what is currently set. */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bankcon = __raw_readl(bank_reg(bank));
+
+ if (!bank_is_io(bankcon))
+ continue;
+
+ s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+ __func__, bank, bankcon);
+
+ bt = kzalloc(sizeof(*bt), GFP_KERNEL);
+ if (!bt)
+ return -ENOMEM;
+
+ /* find out in nWait is enabled for bank. */
+
+ if (bank != 0) {
+ unsigned long tmp = S3C2410_BWSCON_GET(bwscon, bank);
+ if (tmp & S3C2410_BWSCON_WS)
+ bt->nwait_en = 1;
+ }
+
+ timings->bank[bank].io_2410 = bt;
+ bt->bankcon = bankcon;
+
+ s3c2410_iotiming_getbank(cfg, bt);
+ }
+
+ s3c2410_print_timing("get", timings);
+ return 0;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006-2008 Simtec Electronics
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>
+//
+// S3C2412/S3C2443 (PL093 based) IO timing support
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+
+#include <mach/s3c2412.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing information via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ unsigned int bank;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+ "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+ print_ns(bt->idcy),
+ print_ns(bt->wstrd),
+ print_ns(bt->wstwr),
+ print_ns(bt->wstoen),
+ print_ns(bt->wstwen),
+ print_ns(bt->wstbrd));
+ }
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+ return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+ unsigned int *err)
+{
+ unsigned int ret = to_div(hwtm, clk_tns);
+
+ if (ret > 0xf)
+ *err = -EINVAL;
+
+ return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+ struct s3c2412_iobank_timing *bt)
+{
+ unsigned int hclk = cfg->freq.hclk_tns;
+ int err = 0;
+
+ bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+ bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+ bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+ bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+ bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+ bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+ return err;
+}
+
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob)
+{
+ struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+ seq_printf(seq,
+ "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+ "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+ print_ns(bt->idcy),
+ print_ns(bt->wstrd),
+ print_ns(bt->wstwr),
+ print_ns(bt->wstoen),
+ print_ns(bt->wstwen),
+ print_ns(bt->wstbrd));
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ int bank;
+ int ret;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ ret = s3c2412_calc_bank(cfg, bt);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+ __func__, bank);
+ goto err;
+ }
+ }
+
+ return 0;
+ err:
+ return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ void __iomem *regs;
+ int bank;
+
+ /* set the io timings from the specifier */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ regs = S3C2412_SSMC_BANK(bank);
+
+ __raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+ __raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+ __raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+ __raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+ __raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+ __raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+ }
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+ return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+ struct s3c2412_iobank_timing *bt,
+ unsigned int bank)
+{
+ unsigned long clk = cfg->freq.hclk_tns; /* ssmc clock??? */
+ void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+ bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+ bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+ bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+ bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+ bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+ if (bank < 2)
+ return true;
+
+ return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2412_iobank_timing *bt;
+ u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+ unsigned int bank;
+
+ /* look through all banks to see what is currently set. */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ if (!bank_is_io(bank, bankcfg))
+ continue;
+
+ bt = kzalloc(sizeof(*bt), GFP_KERNEL);
+ if (!bt)
+ return -ENOMEM;
+
+ timings->bank[bank].io_2412 = bt;
+ s3c2412_iotiming_getbank(cfg, bt, bank);
+ }
+
+ s3c2412_print_timing("get", timings);
+ return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ u32 refresh;
+
+ WARN_ON(board == NULL);
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * down to ensure that we do not overflow 32 bit numbers.
+ *
+ * This should work for HCLK up to 133MHz and refresh period up
+ * to 30usec.
+ */
+
+ refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+ refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
+ refresh &= ((1 << 16) - 1);
+
+ s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+ __raw_writel(refresh, S3C2412_REFRESH);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2003-2004 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// S3C24XX - IRQ PM code
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/map-base.h>
+#include <plat/map-s3c.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/pm-core.h>
+
+#include <asm/irq.h>
+
+int s3c_irq_wake(struct irq_data *data, unsigned int state)
+{
+ unsigned long irqbit = 1 << data->hwirq;
+
+ if (!(s3c_irqwake_intallow & irqbit))
+ return -ENOENT;
+
+ pr_info("wake %s for hwirq %lu\n",
+ state ? "enabled" : "disabled", data->hwirq);
+
+ if (!state)
+ s3c_irqwake_intmask |= irqbit;
+ else
+ s3c_irqwake_intmask &= ~irqbit;
+
+ return 0;
+}
+
+static struct sleep_save irq_save[] = {
+ SAVE_ITEM(S3C2410_INTMSK),
+ SAVE_ITEM(S3C2410_INTSUBMSK),
+};
+
+/* the extint values move between the s3c2410/s3c2440 and the s3c2412
+ * so we use an array to hold them, and to calculate the address of
+ * the register at run-time
+*/
+
+static unsigned long save_extint[3];
+static unsigned long save_eintflt[4];
+static unsigned long save_eintmask;
+
+static int s3c24xx_irq_suspend(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
+
+ for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+ save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
+
+ s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+ save_eintmask = __raw_readl(S3C24XX_EINTMASK);
+
+ return 0;
+}
+
+static void s3c24xx_irq_resume(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+
+ for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+ __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
+
+ s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+ __raw_writel(save_eintmask, S3C24XX_EINTMASK);
+}
+
+struct syscore_ops s3c24xx_irq_syscore_ops = {
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
+};
+
+#ifdef CONFIG_CPU_S3C2416
+static struct sleep_save s3c2416_irq_save[] = {
+ SAVE_ITEM(S3C2416_INTMSK2),
+};
+
+static int s3c2416_irq_suspend(void)
+{
+ s3c_pm_do_save(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
+
+ return 0;
+}
+
+static void s3c2416_irq_resume(void)
+{
+ s3c_pm_do_restore(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
+}
+
+struct syscore_ops s3c2416_irq_syscore_ops = {
+ .suspend = s3c2416_irq_suspend,
+ .resume = s3c2416_irq_resume,
+};
+#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// S3C64XX - Interrupt handling Power Management
+
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/syscore_ops.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include <mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+/* We handled all the IRQ types in this code, to save having to make several
+ * small files to handle each different type separately. Having the EINT_GRP
+ * code here shouldn't be as much bloat as the IRQ table space needed when
+ * they are enabled. The added benefit is we ensure that these registers are
+ * in the same state as we suspended.
+ */
+
+static struct sleep_save irq_save[] = {
+ SAVE_ITEM(S3C64XX_PRIORITY),
+ SAVE_ITEM(S3C64XX_EINT0CON0),
+ SAVE_ITEM(S3C64XX_EINT0CON1),
+ SAVE_ITEM(S3C64XX_EINT0FLTCON0),
+ SAVE_ITEM(S3C64XX_EINT0FLTCON1),
+ SAVE_ITEM(S3C64XX_EINT0FLTCON2),
+ SAVE_ITEM(S3C64XX_EINT0FLTCON3),
+ SAVE_ITEM(S3C64XX_EINT0MASK),
+};
+
+static struct irq_grp_save {
+ u32 fltcon;
+ u32 con;
+ u32 mask;
+} eint_grp_save[5];
+
+#ifndef CONFIG_SERIAL_SAMSUNG_UARTS
+#define SERIAL_SAMSUNG_UARTS 0
+#else
+#define SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS
+#endif
+
+static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS];
+
+static int s3c64xx_irq_pm_suspend(void)
+{
+ struct irq_grp_save *grp = eint_grp_save;
+ int i;
+
+ S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+ s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+ for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
+ irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+ for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+ grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
+ grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
+ grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
+ }
+
+ return 0;
+}
+
+static void s3c64xx_irq_pm_resume(void)
+{
+ struct irq_grp_save *grp = eint_grp_save;
+ int i;
+
+ S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+ s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+ for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
+ __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+ for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+ __raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
+ __raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
+ __raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
+ }
+
+ S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+}
+
+static struct syscore_ops s3c64xx_irq_syscore_ops = {
+ .suspend = s3c64xx_irq_pm_suspend,
+ .resume = s3c64xx_irq_pm_resume,
+};
+
+static __init int s3c64xx_syscore_init(void)
+{
+ /* Appropriate drivers (pinctrl, uart) handle this when using DT. */
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
+ return 0;
+
+ register_syscore_ops(&s3c64xx_irq_syscore_ops);
+
+ return 0;
+}
+
+core_initcall(s3c64xx_syscore_init);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/stddef.h>
+#include <linux/export.h>
+#include <linux/spi/s3c24xx-fiq.h>
+
+EXPORT_SYMBOL(s3c24xx_spi_fiq_rx);
+EXPORT_SYMBOL(s3c24xx_spi_fiq_txrx);
+EXPORT_SYMBOL(s3c24xx_spi_fiq_tx);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* linux/drivers/spi/spi_s3c24xx_fiq.S
+ *
+ * Copyright 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - FIQ pseudo-DMA transfer code
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#include <mach/map.h>
+#include <mach/regs-irq.h>
+
+#include <linux/spi/s3c24xx-fiq.h>
+
+#define S3C2410_SPTDAT (0x10)
+#define S3C2410_SPRDAT (0x14)
+
+ .text
+
+ @ entry to these routines is as follows, with the register names
+ @ defined in fiq.h so that they can be shared with the C files which
+ @ setup the calling registers.
+ @
+ @ fiq_rirq The base of the IRQ registers to find S3C2410_SRCPND
+ @ fiq_rtmp Temporary register to hold tx/rx data
+ @ fiq_rspi The base of the SPI register block
+ @ fiq_rtx The tx buffer pointer
+ @ fiq_rrx The rx buffer pointer
+ @ fiq_rcount The number of bytes to move
+
+ @ each entry starts with a word entry of how long it is
+ @ and an offset to the irq acknowledgment word
+
+ENTRY(s3c24xx_spi_fiq_rx)
+s3c24xx_spi_fix_rx:
+ .word fiq_rx_end - fiq_rx_start
+ .word fiq_rx_irq_ack - fiq_rx_start
+fiq_rx_start:
+ ldr fiq_rtmp, fiq_rx_irq_ack
+ str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
+
+ ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ]
+ strb fiq_rtmp, [ fiq_rrx ], #1
+
+ mov fiq_rtmp, #0xff
+ strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
+
+ subs fiq_rcount, fiq_rcount, #1
+ subnes pc, lr, #4 @@ return, still have work to do
+
+ @@ set IRQ controller so that next op will trigger IRQ
+ mov fiq_rtmp, #0
+ str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ]
+ subs pc, lr, #4
+
+fiq_rx_irq_ack:
+ .word 0
+fiq_rx_end:
+
+ENTRY(s3c24xx_spi_fiq_txrx)
+s3c24xx_spi_fiq_txrx:
+ .word fiq_txrx_end - fiq_txrx_start
+ .word fiq_txrx_irq_ack - fiq_txrx_start
+fiq_txrx_start:
+
+ ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ]
+ strb fiq_rtmp, [ fiq_rrx ], #1
+
+ ldr fiq_rtmp, fiq_txrx_irq_ack
+ str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
+
+ ldrb fiq_rtmp, [ fiq_rtx ], #1
+ strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
+
+ subs fiq_rcount, fiq_rcount, #1
+ subnes pc, lr, #4 @@ return, still have work to do
+
+ mov fiq_rtmp, #0
+ str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ]
+ subs pc, lr, #4
+
+fiq_txrx_irq_ack:
+ .word 0
+
+fiq_txrx_end:
+
+ENTRY(s3c24xx_spi_fiq_tx)
+s3c24xx_spi_fix_tx:
+ .word fiq_tx_end - fiq_tx_start
+ .word fiq_tx_irq_ack - fiq_tx_start
+fiq_tx_start:
+ ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ]
+
+ ldr fiq_rtmp, fiq_tx_irq_ack
+ str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
+
+ ldrb fiq_rtmp, [ fiq_rtx ], #1
+ strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
+
+ subs fiq_rcount, fiq_rcount, #1
+ subnes pc, lr, #4 @@ return, still have work to do
+
+ mov fiq_rtmp, #0
+ str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ]
+ subs pc, lr, #4
+
+fiq_tx_irq_ack:
+ .word 0
+
+fiq_tx_end:
+
+ .end
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * S3C24XX IRQ handling
+ *
+ * Copyright (c) 2003-2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
+*/
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+
+#include <asm/exception.h>
+#include <asm/mach/irq.h>
+
+#include <mach/irqs.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-irqtype.h>
+#include <plat/pm.h>
+
+#define S3C_IRQTYPE_NONE 0
+#define S3C_IRQTYPE_EINT 1
+#define S3C_IRQTYPE_EDGE 2
+#define S3C_IRQTYPE_LEVEL 3
+
+struct s3c_irq_data {
+ unsigned int type;
+ unsigned long offset;
+ unsigned long parent_irq;
+
+ /* data gets filled during init */
+ struct s3c_irq_intc *intc;
+ unsigned long sub_bits;
+ struct s3c_irq_intc *sub_intc;
+};
+
+/*
+ * Structure holding the controller data
+ * @reg_pending register holding pending irqs
+ * @reg_intpnd special register intpnd in main intc
+ * @reg_mask mask register
+ * @domain irq_domain of the controller
+ * @parent parent controller for ext and sub irqs
+ * @irqs irq-data, always s3c_irq_data[32]
+ */
+struct s3c_irq_intc {
+ void __iomem *reg_pending;
+ void __iomem *reg_intpnd;
+ void __iomem *reg_mask;
+ struct irq_domain *domain;
+ struct s3c_irq_intc *parent;
+ struct s3c_irq_data *irqs;
+};
+
+/*
+ * Array holding pointers to the global controller structs
+ * [0] ... main_intc
+ * [1] ... sub_intc
+ * [2] ... main_intc2 on s3c2416
+ */
+static struct s3c_irq_intc *s3c_intc[3];
+
+static void s3c_irq_mask(struct irq_data *data)
+{
+ struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
+ struct s3c_irq_intc *intc = irq_data->intc;
+ struct s3c_irq_intc *parent_intc = intc->parent;
+ struct s3c_irq_data *parent_data;
+ unsigned long mask;
+ unsigned int irqno;
+
+ mask = readl_relaxed(intc->reg_mask);
+ mask |= (1UL << irq_data->offset);
+ writel_relaxed(mask, intc->reg_mask);
+
+ if (parent_intc) {
+ parent_data = &parent_intc->irqs[irq_data->parent_irq];
+
+ /* check to see if we need to mask the parent IRQ
+ * The parent_irq is always in main_intc, so the hwirq
+ * for find_mapping does not need an offset in any case.
+ */
+ if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
+ irqno = irq_find_mapping(parent_intc->domain,
+ irq_data->parent_irq);
+ s3c_irq_mask(irq_get_irq_data(irqno));
+ }
+ }
+}
+
+static void s3c_irq_unmask(struct irq_data *data)
+{
+ struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
+ struct s3c_irq_intc *intc = irq_data->intc;
+ struct s3c_irq_intc *parent_intc = intc->parent;
+ unsigned long mask;
+ unsigned int irqno;
+
+ mask = readl_relaxed(intc->reg_mask);
+ mask &= ~(1UL << irq_data->offset);
+ writel_relaxed(mask, intc->reg_mask);
+
+ if (parent_intc) {
+ irqno = irq_find_mapping(parent_intc->domain,
+ irq_data->parent_irq);
+ s3c_irq_unmask(irq_get_irq_data(irqno));
+ }
+}
+
+static inline void s3c_irq_ack(struct irq_data *data)
+{
+ struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
+ struct s3c_irq_intc *intc = irq_data->intc;
+ unsigned long bitval = 1UL << irq_data->offset;
+
+ writel_relaxed(bitval, intc->reg_pending);
+ if (intc->reg_intpnd)
+ writel_relaxed(bitval, intc->reg_intpnd);
+}
+
+static int s3c_irq_type(struct irq_data *data, unsigned int type)
+{
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_EDGE_FALLING:
+ case IRQ_TYPE_EDGE_BOTH:
+ irq_set_handler(data->irq, handle_edge_irq);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ case IRQ_TYPE_LEVEL_HIGH:
+ irq_set_handler(data->irq, handle_level_irq);
+ break;
+ default:
+ pr_err("No such irq type %d\n", type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int s3c_irqext_type_set(void __iomem *gpcon_reg,
+ void __iomem *extint_reg,
+ unsigned long gpcon_offset,
+ unsigned long extint_offset,
+ unsigned int type)
+{
+ unsigned long newvalue = 0, value;
+
+ /* Set the GPIO to external interrupt mode */
+ value = readl_relaxed(gpcon_reg);
+ value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
+ writel_relaxed(value, gpcon_reg);
+
+ /* Set the external interrupt to pointed trigger type */
+ switch (type)
+ {
+ case IRQ_TYPE_NONE:
+ pr_warn("No edge setting!\n");
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S3C2410_EXTINT_RISEEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S3C2410_EXTINT_FALLEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S3C2410_EXTINT_BOTHEDGE;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S3C2410_EXTINT_LOWLEV;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S3C2410_EXTINT_HILEV;
+ break;
+
+ default:
+ pr_err("No such irq type %d\n", type);
+ return -EINVAL;
+ }
+
+ value = readl_relaxed(extint_reg);
+ value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
+ writel_relaxed(value, extint_reg);
+
+ return 0;
+}
+
+static int s3c_irqext_type(struct irq_data *data, unsigned int type)
+{
+ void __iomem *extint_reg;
+ void __iomem *gpcon_reg;
+ unsigned long gpcon_offset, extint_offset;
+
+ if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
+ gpcon_reg = S3C2410_GPFCON;
+ extint_reg = S3C24XX_EXTINT0;
+ gpcon_offset = (data->hwirq) * 2;
+ extint_offset = (data->hwirq) * 4;
+ } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
+ gpcon_reg = S3C2410_GPGCON;
+ extint_reg = S3C24XX_EXTINT1;
+ gpcon_offset = (data->hwirq - 8) * 2;
+ extint_offset = (data->hwirq - 8) * 4;
+ } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
+ gpcon_reg = S3C2410_GPGCON;
+ extint_reg = S3C24XX_EXTINT2;
+ gpcon_offset = (data->hwirq - 8) * 2;
+ extint_offset = (data->hwirq - 16) * 4;
+ } else {
+ return -EINVAL;
+ }
+
+ return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+ extint_offset, type);
+}
+
+static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
+{
+ void __iomem *extint_reg;
+ void __iomem *gpcon_reg;
+ unsigned long gpcon_offset, extint_offset;
+
+ if (data->hwirq <= 3) {
+ gpcon_reg = S3C2410_GPFCON;
+ extint_reg = S3C24XX_EXTINT0;
+ gpcon_offset = (data->hwirq) * 2;
+ extint_offset = (data->hwirq) * 4;
+ } else {
+ return -EINVAL;
+ }
+
+ return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+ extint_offset, type);
+}
+
+static struct irq_chip s3c_irq_chip = {
+ .name = "s3c",
+ .irq_ack = s3c_irq_ack,
+ .irq_mask = s3c_irq_mask,
+ .irq_unmask = s3c_irq_unmask,
+ .irq_set_type = s3c_irq_type,
+ .irq_set_wake = s3c_irq_wake
+};
+
+static struct irq_chip s3c_irq_level_chip = {
+ .name = "s3c-level",
+ .irq_mask = s3c_irq_mask,
+ .irq_unmask = s3c_irq_unmask,
+ .irq_ack = s3c_irq_ack,
+ .irq_set_type = s3c_irq_type,
+};
+
+static struct irq_chip s3c_irqext_chip = {
+ .name = "s3c-ext",
+ .irq_mask = s3c_irq_mask,
+ .irq_unmask = s3c_irq_unmask,
+ .irq_ack = s3c_irq_ack,
+ .irq_set_type = s3c_irqext_type,
+ .irq_set_wake = s3c_irqext_wake
+};
+
+static struct irq_chip s3c_irq_eint0t4 = {
+ .name = "s3c-ext0",
+ .irq_ack = s3c_irq_ack,
+ .irq_mask = s3c_irq_mask,
+ .irq_unmask = s3c_irq_unmask,
+ .irq_set_wake = s3c_irq_wake,
+ .irq_set_type = s3c_irqext0_type,
+};
+
+static void s3c_irq_demux(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc);
+ struct s3c_irq_intc *intc = irq_data->intc;
+ struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
+ unsigned int n, offset, irq;
+ unsigned long src, msk;
+
+ /* we're using individual domains for the non-dt case
+ * and one big domain for the dt case where the subintc
+ * starts at hwirq number 32.
+ */
+ offset = irq_domain_get_of_node(intc->domain) ? 32 : 0;
+
+ chained_irq_enter(chip, desc);
+
+ src = readl_relaxed(sub_intc->reg_pending);
+ msk = readl_relaxed(sub_intc->reg_mask);
+
+ src &= ~msk;
+ src &= irq_data->sub_bits;
+
+ while (src) {
+ n = __ffs(src);
+ src &= ~(1 << n);
+ irq = irq_find_mapping(sub_intc->domain, offset + n);
+ generic_handle_irq(irq);
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
+ struct pt_regs *regs, int intc_offset)
+{
+ int pnd;
+ int offset;
+
+ pnd = readl_relaxed(intc->reg_intpnd);
+ if (!pnd)
+ return false;
+
+ /* non-dt machines use individual domains */
+ if (!irq_domain_get_of_node(intc->domain))
+ intc_offset = 0;
+
+ /* We have a problem that the INTOFFSET register does not always
+ * show one interrupt. Occasionally we get two interrupts through
+ * the prioritiser, and this causes the INTOFFSET register to show
+ * what looks like the logical-or of the two interrupt numbers.
+ *
+ * Thanks to Klaus, Shannon, et al for helping to debug this problem
+ */
+ offset = readl_relaxed(intc->reg_intpnd + 4);
+
+ /* Find the bit manually, when the offset is wrong.
+ * The pending register only ever contains the one bit of the next
+ * interrupt to handle.
+ */
+ if (!(pnd & (1 << offset)))
+ offset = __ffs(pnd);
+
+ handle_domain_irq(intc->domain, intc_offset + offset, regs);
+ return true;
+}
+
+asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
+{
+ do {
+ if (likely(s3c_intc[0]))
+ if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
+ continue;
+
+ if (s3c_intc[2])
+ if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
+ continue;
+
+ break;
+ } while (1);
+}
+
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @ack_ptr: pointer to a location for storing the bit mask
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ *
+ * returns the mask value for the register.
+ */
+int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on)
+{
+ u32 intmod;
+ unsigned offs;
+
+ if (on) {
+ offs = irq - FIQ_START;
+ if (offs > 31)
+ return 0;
+
+ intmod = 1 << offs;
+ } else {
+ intmod = 0;
+ }
+
+ if (ack_ptr)
+ *ack_ptr = intmod;
+ writel_relaxed(intmod, S3C2410_INTMOD);
+
+ return intmod;
+}
+
+EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
+#endif
+
+static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct s3c_irq_intc *intc = h->host_data;
+ struct s3c_irq_data *irq_data = &intc->irqs[hw];
+ struct s3c_irq_intc *parent_intc;
+ struct s3c_irq_data *parent_irq_data;
+ unsigned int irqno;
+
+ /* attach controller pointer to irq_data */
+ irq_data->intc = intc;
+ irq_data->offset = hw;
+
+ parent_intc = intc->parent;
+
+ /* set handler and flags */
+ switch (irq_data->type) {
+ case S3C_IRQTYPE_NONE:
+ return 0;
+ case S3C_IRQTYPE_EINT:
+ /* On the S3C2412, the EINT0to3 have a parent irq
+ * but need the s3c_irq_eint0t4 chip
+ */
+ if (parent_intc && (!soc_is_s3c2412() || hw >= 4))
+ irq_set_chip_and_handler(virq, &s3c_irqext_chip,
+ handle_edge_irq);
+ else
+ irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
+ handle_edge_irq);
+ break;
+ case S3C_IRQTYPE_EDGE:
+ if (parent_intc || intc->reg_pending == S3C2416_SRCPND2)
+ irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+ handle_edge_irq);
+ else
+ irq_set_chip_and_handler(virq, &s3c_irq_chip,
+ handle_edge_irq);
+ break;
+ case S3C_IRQTYPE_LEVEL:
+ if (parent_intc)
+ irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+ handle_level_irq);
+ else
+ irq_set_chip_and_handler(virq, &s3c_irq_chip,
+ handle_level_irq);
+ break;
+ default:
+ pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
+ return -EINVAL;
+ }
+
+ irq_set_chip_data(virq, irq_data);
+
+ if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) {
+ if (irq_data->parent_irq > 31) {
+ pr_err("irq-s3c24xx: parent irq %lu is out of range\n",
+ irq_data->parent_irq);
+ return -EINVAL;
+ }
+
+ parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
+ parent_irq_data->sub_intc = intc;
+ parent_irq_data->sub_bits |= (1UL << hw);
+
+ /* attach the demuxer to the parent irq */
+ irqno = irq_find_mapping(parent_intc->domain,
+ irq_data->parent_irq);
+ if (!irqno) {
+ pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
+ irq_data->parent_irq);
+ return -EINVAL;
+ }
+ irq_set_chained_handler(irqno, s3c_irq_demux);
+ }
+
+ return 0;
+}
+
+static const struct irq_domain_ops s3c24xx_irq_ops = {
+ .map = s3c24xx_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
+{
+ void __iomem *reg_source;
+ unsigned long pend;
+ unsigned long last;
+ int i;
+
+ /* if intpnd is set, read the next pending irq from there */
+ reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
+
+ last = 0;
+ for (i = 0; i < 4; i++) {
+ pend = readl_relaxed(reg_source);
+
+ if (pend == 0 || pend == last)
+ break;
+
+ writel_relaxed(pend, intc->reg_pending);
+ if (intc->reg_intpnd)
+ writel_relaxed(pend, intc->reg_intpnd);
+
+ pr_info("irq: clearing pending status %08x\n", (int)pend);
+ last = pend;
+ }
+}
+
+static struct s3c_irq_intc * __init s3c24xx_init_intc(struct device_node *np,
+ struct s3c_irq_data *irq_data,
+ struct s3c_irq_intc *parent,
+ unsigned long address)
+{
+ struct s3c_irq_intc *intc;
+ void __iomem *base = (void *)0xf6000000; /* static mapping */
+ int irq_num;
+ int irq_start;
+ int ret;
+
+ intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
+ if (!intc)
+ return ERR_PTR(-ENOMEM);
+
+ intc->irqs = irq_data;
+
+ if (parent)
+ intc->parent = parent;
+
+ /* select the correct data for the controller.
+ * Need to hard code the irq num start and offset
+ * to preserve the static mapping for now
+ */
+ switch (address) {
+ case 0x4a000000:
+ pr_debug("irq: found main intc\n");
+ intc->reg_pending = base;
+ intc->reg_mask = base + 0x08;
+ intc->reg_intpnd = base + 0x10;
+ irq_num = 32;
+ irq_start = S3C2410_IRQ(0);
+ break;
+ case 0x4a000018:
+ pr_debug("irq: found subintc\n");
+ intc->reg_pending = base + 0x18;
+ intc->reg_mask = base + 0x1c;
+ irq_num = 29;
+ irq_start = S3C2410_IRQSUB(0);
+ break;
+ case 0x4a000040:
+ pr_debug("irq: found intc2\n");
+ intc->reg_pending = base + 0x40;
+ intc->reg_mask = base + 0x48;
+ intc->reg_intpnd = base + 0x50;
+ irq_num = 8;
+ irq_start = S3C2416_IRQ(0);
+ break;
+ case 0x560000a4:
+ pr_debug("irq: found eintc\n");
+ base = (void *)0xfd000000;
+
+ intc->reg_mask = base + 0xa4;
+ intc->reg_pending = base + 0xa8;
+ irq_num = 24;
+ irq_start = S3C2410_IRQ(32);
+ break;
+ default:
+ pr_err("irq: unsupported controller address\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* now that all the data is complete, init the irq-domain */
+ s3c24xx_clear_intc(intc);
+ intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
+ 0, &s3c24xx_irq_ops,
+ intc);
+ if (!intc->domain) {
+ pr_err("irq: could not create irq-domain\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ set_handle_irq(s3c24xx_handle_irq);
+
+ return intc;
+
+err:
+ kfree(intc);
+ return ERR_PTR(ret);
+}
+
+static struct s3c_irq_data __maybe_unused init_eint[32] = {
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
+};
+
+#ifdef CONFIG_CPU_S3C2410
+static struct s3c_irq_data init_s3c2410base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2410subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+};
+
+void __init s3c2410_init_irq(void)
+{
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
+
+ s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL,
+ 0x4a000000);
+ if (IS_ERR(s3c_intc[0])) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
+
+ s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0],
+ s3c_intc[0], 0x4a000018);
+ s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c_irq_data init_s3c2412base[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2412eint[32] = {
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
+};
+
+static struct s3c_irq_data init_s3c2412subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_NONE, },
+ { .type = S3C_IRQTYPE_NONE, },
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */
+};
+
+void __init s3c2412_init_irq(void)
+{
+ pr_info("S3C2412: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
+
+ s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL,
+ 0x4a000000);
+ if (IS_ERR(s3c_intc[0])) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
+
+ s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4);
+ s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0],
+ s3c_intc[0], 0x4a000018);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+static struct s3c_irq_data init_s3c2416base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_NONE, },
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2416subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+static struct s3c_irq_data init_s3c2416_second[32] = {
+ { .type = S3C_IRQTYPE_EDGE }, /* 2D */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
+};
+
+void __init s3c2416_init_irq(void)
+{
+ pr_info("S3C2416: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
+
+ s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL,
+ 0x4a000000);
+ if (IS_ERR(s3c_intc[0])) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
+
+ s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+ s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0],
+ s3c_intc[0], 0x4a000018);
+
+ s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0],
+ NULL, 0x4a000040);
+}
+
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+static struct s3c_irq_data init_s3c2440base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2440subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+void __init s3c2440_init_irq(void)
+{
+ pr_info("S3C2440: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
+
+ s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL,
+ 0x4a000000);
+ if (IS_ERR(s3c_intc[0])) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
+
+ s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+ s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0],
+ s3c_intc[0], 0x4a000018);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+static struct s3c_irq_data init_s3c2442base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2442subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
+};
+
+void __init s3c2442_init_irq(void)
+{
+ pr_info("S3C2442: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
+
+ s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL,
+ 0x4a000000);
+ if (IS_ERR(s3c_intc[0])) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
+
+ s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+ s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0],
+ s3c_intc[0], 0x4a000018);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+static struct s3c_irq_data init_s3c2443base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* CFON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+
+static struct s3c_irq_data init_s3c2443subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+void __init s3c2443_init_irq(void)
+{
+ pr_info("S3C2443: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
+
+ s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL,
+ 0x4a000000);
+ if (IS_ERR(s3c_intc[0])) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
+
+ s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+ s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0],
+ s3c_intc[0], 0x4a000018);
+}
+#endif
+
+#ifdef CONFIG_OF
+static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ unsigned int ctrl_num = hw / 32;
+ unsigned int intc_hw = hw % 32;
+ struct s3c_irq_intc *intc = s3c_intc[ctrl_num];
+ struct s3c_irq_intc *parent_intc = intc->parent;
+ struct s3c_irq_data *irq_data = &intc->irqs[intc_hw];
+
+ /* attach controller pointer to irq_data */
+ irq_data->intc = intc;
+ irq_data->offset = intc_hw;
+
+ if (!parent_intc)
+ irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq);
+ else
+ irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+ handle_edge_irq);
+
+ irq_set_chip_data(virq, irq_data);
+
+ return 0;
+}
+
+/* Translate our of irq notation
+ * format: <ctrl_num ctrl_irq parent_irq type>
+ */
+static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_type)
+{
+ struct s3c_irq_intc *intc;
+ struct s3c_irq_intc *parent_intc;
+ struct s3c_irq_data *irq_data;
+ struct s3c_irq_data *parent_irq_data;
+ int irqno;
+
+ if (WARN_ON(intsize < 4))
+ return -EINVAL;
+
+ if (intspec[0] > 2 || !s3c_intc[intspec[0]]) {
+ pr_err("controller number %d invalid\n", intspec[0]);
+ return -EINVAL;
+ }
+ intc = s3c_intc[intspec[0]];
+
+ *out_hwirq = intspec[0] * 32 + intspec[2];
+ *out_type = intspec[3] & IRQ_TYPE_SENSE_MASK;
+
+ parent_intc = intc->parent;
+ if (parent_intc) {
+ irq_data = &intc->irqs[intspec[2]];
+ irq_data->parent_irq = intspec[1];
+ parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
+ parent_irq_data->sub_intc = intc;
+ parent_irq_data->sub_bits |= (1UL << intspec[2]);
+
+ /* parent_intc is always s3c_intc[0], so no offset */
+ irqno = irq_create_mapping(parent_intc->domain, intspec[1]);
+ if (irqno < 0) {
+ pr_err("irq: could not map parent interrupt\n");
+ return irqno;
+ }
+
+ irq_set_chained_handler(irqno, s3c_irq_demux);
+ }
+
+ return 0;
+}
+
+static const struct irq_domain_ops s3c24xx_irq_ops_of = {
+ .map = s3c24xx_irq_map_of,
+ .xlate = s3c24xx_irq_xlate_of,
+};
+
+struct s3c24xx_irq_of_ctrl {
+ char *name;
+ unsigned long offset;
+ struct s3c_irq_intc **handle;
+ struct s3c_irq_intc **parent;
+ struct irq_domain_ops *ops;
+};
+
+static int __init s3c_init_intc_of(struct device_node *np,
+ struct device_node *interrupt_parent,
+ struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl)
+{
+ struct s3c_irq_intc *intc;
+ struct s3c24xx_irq_of_ctrl *ctrl;
+ struct irq_domain *domain;
+ void __iomem *reg_base;
+ int i;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base) {
+ pr_err("irq-s3c24xx: could not map irq registers\n");
+ return -EINVAL;
+ }
+
+ domain = irq_domain_add_linear(np, num_ctrl * 32,
+ &s3c24xx_irq_ops_of, NULL);
+ if (!domain) {
+ pr_err("irq: could not create irq-domain\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < num_ctrl; i++) {
+ ctrl = &s3c_ctrl[i];
+
+ pr_debug("irq: found controller %s\n", ctrl->name);
+
+ intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
+ if (!intc)
+ return -ENOMEM;
+
+ intc->domain = domain;
+ intc->irqs = kcalloc(32, sizeof(struct s3c_irq_data),
+ GFP_KERNEL);
+ if (!intc->irqs) {
+ kfree(intc);
+ return -ENOMEM;
+ }
+
+ if (ctrl->parent) {
+ intc->reg_pending = reg_base + ctrl->offset;
+ intc->reg_mask = reg_base + ctrl->offset + 0x4;
+
+ if (*(ctrl->parent)) {
+ intc->parent = *(ctrl->parent);
+ } else {
+ pr_warn("irq: parent of %s missing\n",
+ ctrl->name);
+ kfree(intc->irqs);
+ kfree(intc);
+ continue;
+ }
+ } else {
+ intc->reg_pending = reg_base + ctrl->offset;
+ intc->reg_mask = reg_base + ctrl->offset + 0x08;
+ intc->reg_intpnd = reg_base + ctrl->offset + 0x10;
+ }
+
+ s3c24xx_clear_intc(intc);
+ s3c_intc[i] = intc;
+ }
+
+ set_handle_irq(s3c24xx_handle_irq);
+
+ return 0;
+}
+
+static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = {
+ {
+ .name = "intc",
+ .offset = 0,
+ }, {
+ .name = "subintc",
+ .offset = 0x18,
+ .parent = &s3c_intc[0],
+ }
+};
+
+int __init s3c2410_init_intc_of(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ return s3c_init_intc_of(np, interrupt_parent,
+ s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl));
+}
+IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of);
+
+static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = {
+ {
+ .name = "intc",
+ .offset = 0,
+ }, {
+ .name = "subintc",
+ .offset = 0x18,
+ .parent = &s3c_intc[0],
+ }, {
+ .name = "intc2",
+ .offset = 0x40,
+ }
+};
+
+int __init s3c2416_init_intc_of(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ return s3c_init_intc_of(np, interrupt_parent,
+ s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl));
+}
+IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of);
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung SoC UART IRQ demux for S3C64XX and later
+ */
+
+struct s3c_uart_irq {
+ void __iomem *regs;
+ unsigned int base_irq;
+ unsigned int parent_irq;
+};
+
+extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs);
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2006 American Microsystems Limited
+// David Anders <danders@amltd.com>
+//
+// @History:
+// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
+// Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/proc_fs.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <linux/platform_data/fb-s3c2410.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/gpio-cfg.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+
+#include "s3c24xx.h"
+
+static struct resource amlm5900_nor_resource =
+ DEFINE_RES_MEM(0x00000000, SZ_16M);
+
+static struct mtd_partition amlm5900_mtd_partitions[] = {
+ {
+ .name = "System",
+ .size = 0x240000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "Kernel",
+ .size = 0x100000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "Ramdisk",
+ .size = 0x300000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "JFFS2",
+ .size = 0x9A0000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "Settings",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct physmap_flash_data amlm5900_flash_data = {
+ .width = 2,
+ .parts = amlm5900_mtd_partitions,
+ .nr_parts = ARRAY_SIZE(amlm5900_mtd_partitions),
+};
+
+static struct platform_device amlm5900_device_nor = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &amlm5900_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &amlm5900_nor_resource,
+};
+
+static struct map_desc amlm5900_iodesc[] __initdata = {
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+static struct gpiod_lookup_table amlm5900_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct platform_device *amlm5900_devices[] __initdata = {
+#ifdef CONFIG_FB_S3C2410
+ &s3c_device_lcd,
+#endif
+ &s3c_device_adc,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_ohci,
+ &s3c_device_rtc,
+ &s3c_device_usbgadget,
+ &s3c_device_sdi,
+ &amlm5900_device_nor,
+};
+
+static void __init amlm5900_map_io(void)
+{
+ s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
+ s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init amlm5900_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+#ifdef CONFIG_FB_S3C2410
+static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
+ .width = 160,
+ .height = 160,
+
+ .type = S3C2410_LCDCON1_STN4,
+
+ .pixclock = 680000, /* HCLK = 100MHz */
+ .xres = 160,
+ .yres = 160,
+ .bpp = 4,
+ .left_margin = 1 << (4 + 3),
+ .right_margin = 8 << 3,
+ .hsync_len = 48,
+ .upper_margin = 0,
+ .lower_margin = 0,
+
+ .lcdcon5 = 0x00000001,
+};
+
+static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = {
+
+ .displays = &amlm5900_lcd_info,
+ .num_displays = 1,
+ .default_display = 0,
+
+ .gpccon = 0xaaaaaaaa,
+ .gpccon_mask = 0xffffffff,
+ .gpccon_reg = S3C2410_GPCCON,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+ .gpcup_reg = S3C2410_GPCUP,
+
+ .gpdcon = 0xaaaaaaaa,
+ .gpdcon_mask = 0xffffffff,
+ .gpdcon_reg = S3C2410_GPDCON,
+ .gpdup = 0x0000ffff,
+ .gpdup_mask = 0xffffffff,
+ .gpdup_reg = S3C2410_GPDUP,
+};
+#endif
+
+static irqreturn_t
+amlm5900_wake_interrupt(int irq, void *ignored)
+{
+ return IRQ_HANDLED;
+}
+
+static void amlm5900_init_pm(void)
+{
+ int ret = 0;
+
+ ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_SHARED,
+ "amlm5900_wakeup", &amlm5900_wake_interrupt);
+ if (ret != 0) {
+ printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret);
+ } else {
+ enable_irq_wake(IRQ_EINT9);
+ /* configure the suspend/resume status pin */
+ s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+ s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP);
+ }
+}
+static void __init amlm5900_init(void)
+{
+ amlm5900_init_pm();
+#ifdef CONFIG_FB_S3C2410
+ s3c24xx_fb_set_platdata(&amlm5900_fb_info);
+#endif
+ s3c_i2c0_set_platdata(NULL);
+ gpiod_add_lookup_table(&amlm5900_mmc_gpio_table);
+ platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
+}
+
+MACHINE_START(AML_M5900, "AML_M5900")
+ .atag_offset = 0x100,
+ .map_io = amlm5900_map_io,
+ .init_irq = s3c2410_init_irq,
+ .init_machine = amlm5900_init,
+ .init_time = amlm5900_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2003-2009 Simtec Electronics
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <net/ax88796.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+
+#include "anubis.h"
+#include "s3c24xx.h"
+#include "simtec.h"
+
+#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
+
+static struct map_desc anubis_iodesc[] __initdata = {
+ /* ISA IO areas */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(0x0),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(0x0),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ },
+
+ /* we could possibly compress the next set down into a set of smaller tables
+ * pagetables, but that would mean using an L2 section, and it still means
+ * we cannot actually feed the same register to an LDR due to 16K spacing
+ */
+
+ /* CPLD control registers */
+
+ {
+ .virtual = (u32)ANUBIS_VA_CTRL1,
+ .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)ANUBIS_VA_IDREG,
+ .pfn = __phys_to_pfn(ANUBIS_PA_IDREG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [1] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+};
+
+/* NAND Flash on Anubis board */
+
+static int external_map[] = { 2 };
+static int chip0_map[] = { 0 };
+static int chip1_map[] = { 1 };
+
+static struct mtd_partition __initdata anubis_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_16K,
+ .offset = SZ_16K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_128K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_128K,
+ .offset = SZ_128K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/* the Anubis has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
+ [1] = {
+ .name = "External",
+ .nr_chips = 1,
+ .nr_map = external_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part,
+ },
+ [0] = {
+ .name = "chip0",
+ .nr_chips = 1,
+ .nr_map = chip0_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part,
+ },
+ [2] = {
+ .name = "chip1",
+ .nr_chips = 1,
+ .nr_map = chip1_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part,
+ },
+};
+
+static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+ unsigned int tmp;
+
+ slot = set->nr_map[slot] & 3;
+
+ pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
+ slot, set, set->nr_map);
+
+ tmp = __raw_readb(ANUBIS_VA_CTRL1);
+ tmp &= ~ANUBIS_CTRL1_NANDSEL;
+ tmp |= slot;
+
+ pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
+
+ __raw_writeb(tmp, ANUBIS_VA_CTRL1);
+}
+
+static struct s3c2410_platform_nand __initdata anubis_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(anubis_nand_sets),
+ .sets = anubis_nand_sets,
+ .select_chip = anubis_nand_select,
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+/* IDE channels */
+
+static struct pata_platform_info anubis_ide_platdata = {
+ .ioport_shift = 5,
+};
+
+static struct resource anubis_ide0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
+ [2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
+ [3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
+};
+
+static struct platform_device anubis_device_ide0 = {
+ .name = "pata_platform",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_ide0_resource),
+ .resource = anubis_ide0_resource,
+ .dev = {
+ .platform_data = &anubis_ide_platdata,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+static struct resource anubis_ide1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
+ [1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
+ [2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
+};
+
+static struct platform_device anubis_device_ide1 = {
+ .name = "pata_platform",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(anubis_ide1_resource),
+ .resource = anubis_ide1_resource,
+ .dev = {
+ .platform_data = &anubis_ide_platdata,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+/* Asix AX88796 10/100 ethernet controller */
+
+static struct ax_plat_data anubis_asix_platdata = {
+ .flags = AXFLG_MAC_FROMDEV,
+ .wordlength = 2,
+ .dcr_val = 0x48,
+ .rcr_val = 0x40,
+};
+
+static struct resource anubis_asix_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
+ [1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX),
+};
+
+static struct platform_device anubis_device_asix = {
+ .name = "ax88796",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_asix_resource),
+ .resource = anubis_asix_resource,
+ .dev = {
+ .platform_data = &anubis_asix_platdata,
+ }
+};
+
+/* SM501 */
+
+static struct resource anubis_sm501_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_CS2, SZ_8M),
+ [1] = DEFINE_RES_MEM(S3C2410_CS2 + SZ_64M - SZ_2M, SZ_2M),
+ [2] = DEFINE_RES_IRQ(IRQ_EINT0),
+};
+
+static struct sm501_initdata anubis_sm501_initdata = {
+ .gpio_high = {
+ .set = 0x3F000000, /* 24bit panel */
+ .mask = 0x0,
+ },
+ .misc_timing = {
+ .set = 0x010100, /* SDRAM timing */
+ .mask = 0x1F1F00,
+ },
+ .misc_control = {
+ .set = SM501_MISC_PNL_24BIT,
+ .mask = 0,
+ },
+
+ .devices = SM501_USE_GPIO,
+
+ /* set the SDRAM and bus clocks */
+ .mclk = 72 * MHZ,
+ .m1xclk = 144 * MHZ,
+};
+
+static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
+ [0] = {
+ .bus_num = 1,
+ .pin_scl = 44,
+ .pin_sda = 45,
+ },
+ [1] = {
+ .bus_num = 2,
+ .pin_scl = 40,
+ .pin_sda = 41,
+ },
+};
+
+static struct sm501_platdata anubis_sm501_platdata = {
+ .init = &anubis_sm501_initdata,
+ .gpio_base = -1,
+ .gpio_i2c = anubis_sm501_gpio_i2c,
+ .gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c),
+};
+
+static struct platform_device anubis_device_sm501 = {
+ .name = "sm501",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_sm501_resource),
+ .resource = anubis_sm501_resource,
+ .dev = {
+ .platform_data = &anubis_sm501_platdata,
+ },
+};
+
+/* Standard Anubis devices */
+
+static struct platform_device *anubis_devices[] __initdata = {
+ &s3c2410_device_dclk,
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_adc,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &anubis_device_ide0,
+ &anubis_device_ide1,
+ &anubis_device_asix,
+ &anubis_device_sm501,
+};
+
+/* I2C devices. */
+
+static struct i2c_board_info anubis_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tps65011", 0x48),
+ .irq = IRQ_EINT20,
+ }
+};
+
+/* Audio setup */
+static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
+ .have_mic = 1,
+ .have_lout = 1,
+ .output_cdclk = 1,
+ .use_mpllin = 1,
+ .amp_gpio = S3C2410_GPB(2),
+ .amp_gain[0] = S3C2410_GPD(10),
+ .amp_gain[1] = S3C2410_GPD(11),
+};
+
+static void __init anubis_map_io(void)
+{
+ s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
+ s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+
+ /* check for the newer revision boards with large page nand */
+
+ if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
+ printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
+ __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
+ anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
+ anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
+ } else {
+ /* ensure that the GPIO is setup */
+ gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPA(0));
+ }
+}
+
+static void __init anubis_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void __init anubis_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&anubis_nand_info);
+ simtec_audio_add(NULL, false, &anubis_audio);
+
+ platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
+
+ i2c_register_board_info(0, anubis_i2c_devs,
+ ARRAY_SIZE(anubis_i2c_devs));
+}
+
+
+MACHINE_START(ANUBIS, "Simtec-Anubis")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .atag_offset = 0x100,
+ .map_io = anubis_map_io,
+ .init_machine = anubis_init,
+ .init_irq = s3c2440_init_irq,
+ .init_time = anubis_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+// Copyright 2009 Kwangwoo Lee
+// Kwangwoo Lee <kwangwoo.lee@gmail.com>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/dm9000.h>
+
+#include <video/platform_lcd.h>
+#include <video/samsung_fimd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/fb.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <mach/irqs.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+
+/* DM9000 */
+#define ANW6410_PA_DM9000 (0x18000000)
+
+/* A hardware buffer to control external devices is mapped at 0x30000000.
+ * It can not be read. So current status must be kept in anw6410_extdev_status.
+ */
+#define ANW6410_VA_EXTDEV S3C_ADDR(0x02000000)
+#define ANW6410_PA_EXTDEV (0x30000000)
+
+#define ANW6410_EN_DM9000 (1<<11)
+#define ANW6410_EN_LCD (1<<14)
+
+static __u32 anw6410_extdev_status;
+
+static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+};
+
+/* framebuffer and LCD setup. */
+static void __init anw6410_lcd_mode_set(void)
+{
+ u32 tmp;
+
+ /* set the LCD type */
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the LCD bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/* GPF1 = LCD panel power
+ * GPF4 = LCD backlight control
+ */
+static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+ anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
+ __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+ gpio_direction_output(S3C64XX_GPF(1), 1);
+ gpio_direction_output(S3C64XX_GPF(4), 1);
+ } else {
+ anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
+ __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+ gpio_direction_output(S3C64XX_GPF(1), 0);
+ gpio_direction_output(S3C64XX_GPF(4), 0);
+ }
+}
+
+static struct plat_lcd_data anw6410_lcd_power_data = {
+ .set_power = anw6410_lcd_power_set,
+};
+
+static struct platform_device anw6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &anw6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win anw6410_fb_win0 = {
+ .max_bpp = 32,
+ .default_bpp = 16,
+ .xres = 800,
+ .yres = 480,
+};
+
+static struct fb_videomode anw6410_lcd_timing = {
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .vtiming = &anw6410_lcd_timing,
+ .win[0] = &anw6410_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+static void __init anw6410_dm9000_enable(void)
+{
+ anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
+ __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+}
+
+static struct resource anw6410_dm9000_resource[] = {
+ [0] = DEFINE_RES_MEM(ANW6410_PA_DM9000, 4),
+ [1] = DEFINE_RES_MEM(ANW6410_PA_DM9000 + 4, 501),
+ [2] = DEFINE_RES_NAMED(IRQ_EINT(15), 1, NULL, IORESOURCE_IRQ \
+ | IRQF_TRIGGER_HIGH),
+};
+
+static struct dm9000_plat_data anw6410_dm9000_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+ /* dev_addr can be set to provide hwaddr. */
+};
+
+static struct platform_device anw6410_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(anw6410_dm9000_resource),
+ .resource = anw6410_dm9000_resource,
+ .dev = {
+ .platform_data = &anw6410_dm9000_pdata,
+ },
+};
+
+static struct map_desc anw6410_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)ANW6410_VA_EXTDEV,
+ .pfn = __phys_to_pfn(ANW6410_PA_EXTDEV),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct platform_device *anw6410_devices[] __initdata = {
+ &s3c_device_fb,
+ &anw6410_lcd_powerdev,
+ &anw6410_device_eth,
+};
+
+static void __init anw6410_map_io(void)
+{
+ s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
+ s3c64xx_set_xtal_freq(12000000);
+ s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+
+ anw6410_lcd_mode_set();
+}
+
+static void __init anw6410_machine_init(void)
+{
+ s3c_fb_set_platdata(&anw6410_lcd_pdata);
+
+ gpio_request(S3C64XX_GPF(1), "panel power");
+ gpio_request(S3C64XX_GPF(4), "LCD backlight");
+
+ anw6410_dm9000_enable();
+
+ platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
+}
+
+MACHINE_START(ANW6410, "A&W6410")
+ /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
+ .atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
+ .init_irq = s3c6410_init_irq,
+ .map_io = anw6410_map_io,
+ .init_machine = anw6410_machine_init,
+ .init_time = samsung_timer_init,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
+// Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
+// and modifications by SBZ <sbz@spgui.org> and
+// Weibing <http://weibing.blogbus.com>
+//
+// For product information, visit http://www.arm.com/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio/machine.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/dm9000.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+
+#include "s3c24xx.h"
+
+static struct map_desc at2440evb_iodesc[] __initdata = {
+ /* Nothing here */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+};
+
+/* NAND Flash on AT2440EVB board */
+
+static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_256K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "Kernel",
+ .size = SZ_2M,
+ .offset = SZ_256K,
+ },
+ [2] = {
+ .name = "Root",
+ .offset = SZ_256K + SZ_2M,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(at2440evb_default_nand_part),
+ .partitions = at2440evb_default_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(at2440evb_nand_sets),
+ .sets = at2440evb_nand_sets,
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource at2440evb_dm9k_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_CS3, 4),
+ [1] = DEFINE_RES_MEM(S3C2410_CS3 + 4, 4),
+ [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
+ | IORESOURCE_IRQ_HIGHEDGE),
+};
+
+static struct dm9000_plat_data at2440evb_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device at2440evb_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(at2440evb_dm9k_resource),
+ .resource = at2440evb_dm9k_resource,
+ .dev = {
+ .platform_data = &at2440evb_dm9k_pdata,
+ },
+};
+
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
+ .set_power = s3c24xx_mci_def_set_power,
+};
+
+static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* Card detect S3C2410_GPG(10) */
+ GPIO_LOOKUP("GPIOG", 10, "cd", GPIO_ACTIVE_LOW),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+
+/* 7" LCD panel */
+
+static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+
+ .width = 800,
+ .height = 480,
+
+ .pixclock = 33333, /* HCLK 60 MHz, divisor 2 */
+ .xres = 800,
+ .yres = 480,
+ .bpp = 16,
+ .left_margin = 88,
+ .right_margin = 40,
+ .hsync_len = 128,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .vsync_len = 2,
+};
+
+static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
+ .displays = &at2440evb_lcd_cfg,
+ .num_displays = 1,
+ .default_display = 0,
+};
+
+static struct platform_device *at2440evb_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_adc,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &s3c_device_sdi,
+ &s3c_device_lcd,
+ &at2440evb_device_eth,
+};
+
+static void __init at2440evb_map_io(void)
+{
+ s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
+ s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init at2440evb_init_time(void)
+{
+ s3c2440_init_clocks(16934400);
+ samsung_timer_init();
+}
+
+static void __init at2440evb_init(void)
+{
+ s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+ gpiod_add_lookup_table(&at2440evb_mci_gpio_table);
+ s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
+ s3c_nand_set_platdata(&at2440evb_nand_info);
+ s3c_i2c0_set_platdata(NULL);
+
+ platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
+}
+
+
+MACHINE_START(AT2440EVB, "AT2440EVB")
+ .atag_offset = 0x100,
+ .map_io = at2440evb_map_io,
+ .init_machine = at2440evb_init,
+ .init_irq = s3c2440_init_irq,
+ .init_time = at2440evb_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2003-2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// http://www.simtec.co.uk/products/EB2410ITX/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/dm9000.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
+#include <net/ax88796.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/cpu.h>
+#include <linux/soc/samsung/s3c-cpu-freq.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+
+#include "bast.h"
+#include "s3c24xx.h"
+#include "simtec.h"
+
+#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
+
+/* macros for virtual address mods for the io space entries */
+#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
+#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
+#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
+#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
+
+/* macros to modify the physical addresses for io space */
+
+#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
+#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
+#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
+#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
+
+static struct map_desc bast_iodesc[] __initdata = {
+ /* ISA IO areas */
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = PA_CS2(BAST_PA_ISAIO),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = PA_CS3(BAST_PA_ISAIO),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ },
+ /* bast CPLD control registers, and external interrupt controls */
+ {
+ .virtual = (u32)BAST_VA_CTRL1,
+ .pfn = __phys_to_pfn(BAST_PA_CTRL1),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)BAST_VA_CTRL2,
+ .pfn = __phys_to_pfn(BAST_PA_CTRL2),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)BAST_VA_CTRL3,
+ .pfn = __phys_to_pfn(BAST_PA_CTRL3),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)BAST_VA_CTRL4,
+ .pfn = __phys_to_pfn(BAST_PA_CTRL4),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+ /* PC104 IRQ mux */
+ {
+ .virtual = (u32)BAST_VA_PC104_IRQREQ,
+ .pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)BAST_VA_PC104_IRQRAW,
+ .pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)BAST_VA_PC104_IRQMASK,
+ .pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+
+ /* peripheral space... one for each of fast/slow/byte/16bit */
+ /* note, ide is only decoded in word space, even though some registers
+ * are only 8bit */
+
+ /* slow, byte */
+ { VA_C2(BAST_VA_ISAIO), PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
+ { VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
+ { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
+
+ /* slow, word */
+ { VA_C3(BAST_VA_ISAIO), PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
+ { VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
+ { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
+
+ /* fast, byte */
+ { VA_C4(BAST_VA_ISAIO), PA_CS4(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
+ { VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
+ { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
+
+ /* fast, word */
+ { VA_C5(BAST_VA_ISAIO), PA_CS5(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
+ { VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
+ { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ /* port 2 is not actually used */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* NAND Flash on BAST board */
+
+#ifdef CONFIG_PM
+static int bast_pm_suspend(void)
+{
+ /* ensure that an nRESET is not generated on resume. */
+ gpio_direction_output(S3C2410_GPA(21), 1);
+ return 0;
+}
+
+static void bast_pm_resume(void)
+{
+ s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
+}
+
+#else
+#define bast_pm_suspend NULL
+#define bast_pm_resume NULL
+#endif
+
+static struct syscore_ops bast_pm_syscore_ops = {
+ .suspend = bast_pm_suspend,
+ .resume = bast_pm_resume,
+};
+
+static int smartmedia_map[] = { 0 };
+static int chip0_map[] = { 1 };
+static int chip1_map[] = { 2 };
+static int chip2_map[] = { 3 };
+
+static struct mtd_partition __initdata bast_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_16K,
+ .offset = SZ_16K,
+ },
+ [2] = {
+ .name = "user",
+ .offset = SZ_4M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/* the bast has 4 selectable slots for nand-flash, the three
+ * on-board chip areas, as well as the external SmartMedia
+ * slot.
+ *
+ * Note, there is no current hot-plug support for the SmartMedia
+ * socket.
+*/
+
+static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
+ [0] = {
+ .name = "SmartMedia",
+ .nr_chips = 1,
+ .nr_map = smartmedia_map,
+ .options = NAND_SCAN_SILENT_NODEV,
+ .nr_partitions = ARRAY_SIZE(bast_default_nand_part),
+ .partitions = bast_default_nand_part,
+ },
+ [1] = {
+ .name = "chip0",
+ .nr_chips = 1,
+ .nr_map = chip0_map,
+ .nr_partitions = ARRAY_SIZE(bast_default_nand_part),
+ .partitions = bast_default_nand_part,
+ },
+ [2] = {
+ .name = "chip1",
+ .nr_chips = 1,
+ .nr_map = chip1_map,
+ .options = NAND_SCAN_SILENT_NODEV,
+ .nr_partitions = ARRAY_SIZE(bast_default_nand_part),
+ .partitions = bast_default_nand_part,
+ },
+ [3] = {
+ .name = "chip2",
+ .nr_chips = 1,
+ .nr_map = chip2_map,
+ .options = NAND_SCAN_SILENT_NODEV,
+ .nr_partitions = ARRAY_SIZE(bast_default_nand_part),
+ .partitions = bast_default_nand_part,
+ }
+};
+
+static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+ unsigned int tmp;
+
+ slot = set->nr_map[slot] & 3;
+
+ pr_debug("bast_nand: selecting slot %d (set %p,%p)\n",
+ slot, set, set->nr_map);
+
+ tmp = __raw_readb(BAST_VA_CTRL2);
+ tmp &= BAST_CPLD_CTLR2_IDERST;
+ tmp |= slot;
+ tmp |= BAST_CPLD_CTRL2_WNAND;
+
+ pr_debug("bast_nand: ctrl2 now %02x\n", tmp);
+
+ __raw_writeb(tmp, BAST_VA_CTRL2);
+}
+
+static struct s3c2410_platform_nand __initdata bast_nand_info = {
+ .tacls = 30,
+ .twrph0 = 60,
+ .twrph1 = 60,
+ .nr_sets = ARRAY_SIZE(bast_nand_sets),
+ .sets = bast_nand_sets,
+ .select_chip = bast_nand_select,
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+/* DM9000 */
+
+static struct resource bast_dm9k_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
+ [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
+ [2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
+ | IORESOURCE_IRQ_HIGHLEVEL),
+};
+
+/* for the moment we limit ourselves to 16bit IO until some
+ * better IO routines can be written and tested
+*/
+
+static struct dm9000_plat_data bast_dm9k_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device bast_device_dm9k = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bast_dm9k_resource),
+ .resource = bast_dm9k_resource,
+ .dev = {
+ .platform_data = &bast_dm9k_platdata,
+ }
+};
+
+/* serial devices */
+
+#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO)
+#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
+#define SERIAL_CLK (1843200)
+
+static struct plat_serial8250_port bast_sio_data[] = {
+ [0] = {
+ .mapbase = SERIAL_BASE + 0x2f8,
+ .irq = BAST_IRQ_PCSERIAL1,
+ .flags = SERIAL_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = SERIAL_CLK,
+ },
+ [1] = {
+ .mapbase = SERIAL_BASE + 0x3f8,
+ .irq = BAST_IRQ_PCSERIAL2,
+ .flags = SERIAL_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = SERIAL_CLK,
+ },
+ { }
+};
+
+static struct platform_device bast_sio = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = &bast_sio_data,
+ },
+};
+
+/* we have devices on the bus which cannot work much over the
+ * standard 100KHz i2c bus frequency
+*/
+
+static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
+ .flags = 0,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+};
+
+/* Asix AX88796 10/100 ethernet controller */
+
+static struct ax_plat_data bast_asix_platdata = {
+ .flags = AXFLG_MAC_FROMDEV,
+ .wordlength = 2,
+ .dcr_val = 0x48,
+ .rcr_val = 0x40,
+};
+
+static struct resource bast_asix_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
+ [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
+ [2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX),
+};
+
+static struct platform_device bast_device_asix = {
+ .name = "ax88796",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bast_asix_resource),
+ .resource = bast_asix_resource,
+ .dev = {
+ .platform_data = &bast_asix_platdata
+ }
+};
+
+/* Asix AX88796 10/100 ethernet controller parallel port */
+
+static struct resource bast_asixpp_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \
+ 0x30 * 0x20),
+};
+
+static struct platform_device bast_device_axpp = {
+ .name = "ax88796-pp",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bast_asixpp_resource),
+ .resource = bast_asixpp_resource,
+};
+
+/* LCD/VGA controller */
+
+static struct s3c2410fb_display __initdata bast_lcd_info[] = {
+ {
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 640,
+ .height = 480,
+
+ .pixclock = 33333,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 4,
+ .left_margin = 40,
+ .right_margin = 20,
+ .hsync_len = 88,
+ .upper_margin = 30,
+ .lower_margin = 32,
+ .vsync_len = 3,
+
+ .lcdcon5 = 0x00014b02,
+ },
+ {
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 640,
+ .height = 480,
+
+ .pixclock = 33333,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 8,
+ .left_margin = 40,
+ .right_margin = 20,
+ .hsync_len = 88,
+ .upper_margin = 30,
+ .lower_margin = 32,
+ .vsync_len = 3,
+
+ .lcdcon5 = 0x00014b02,
+ },
+ {
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 640,
+ .height = 480,
+
+ .pixclock = 33333,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .left_margin = 40,
+ .right_margin = 20,
+ .hsync_len = 88,
+ .upper_margin = 30,
+ .lower_margin = 32,
+ .vsync_len = 3,
+
+ .lcdcon5 = 0x00014b02,
+ },
+};
+
+/* LCD/VGA controller */
+
+static struct s3c2410fb_mach_info __initdata bast_fb_info = {
+
+ .displays = bast_lcd_info,
+ .num_displays = ARRAY_SIZE(bast_lcd_info),
+ .default_display = 1,
+};
+
+/* I2C devices fitted. */
+
+static struct i2c_board_info bast_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ }, {
+ I2C_BOARD_INFO("simtec-pmu", 0x6b),
+ }, {
+ I2C_BOARD_INFO("ch7013", 0x75),
+ },
+};
+
+static struct s3c_hwmon_pdata bast_hwmon_info = {
+ /* LCD contrast (0-6.6V) */
+ .in[0] = &(struct s3c_hwmon_chcfg) {
+ .name = "lcd-contrast",
+ .mult = 3300,
+ .div = 512,
+ },
+ /* LED current feedback */
+ .in[1] = &(struct s3c_hwmon_chcfg) {
+ .name = "led-feedback",
+ .mult = 3300,
+ .div = 1024,
+ },
+ /* LCD feedback (0-6.6V) */
+ .in[2] = &(struct s3c_hwmon_chcfg) {
+ .name = "lcd-feedback",
+ .mult = 3300,
+ .div = 512,
+ },
+ /* Vcore (1.8-2.0V), Vref 3.3V */
+ .in[3] = &(struct s3c_hwmon_chcfg) {
+ .name = "vcore",
+ .mult = 3300,
+ .div = 1024,
+ },
+};
+
+/* Standard BAST devices */
+// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
+
+static struct platform_device *bast_devices[] __initdata = {
+ &s3c2410_device_dclk,
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &s3c_device_adc,
+ &s3c_device_hwmon,
+ &bast_device_dm9k,
+ &bast_device_asix,
+ &bast_device_axpp,
+ &bast_sio,
+};
+
+static struct s3c_cpufreq_board __initdata bast_cpufreq = {
+ .refresh = 7800, /* 7.8usec */
+ .auto_io = 1,
+ .need_io = 1,
+};
+
+static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
+ .have_mic = 1,
+ .have_lout = 1,
+};
+
+static void __init bast_map_io(void)
+{
+ s3c_hwmon_set_platdata(&bast_hwmon_info);
+
+ s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
+ s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init bast_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void __init bast_init(void)
+{
+ register_syscore_ops(&bast_pm_syscore_ops);
+
+ s3c_i2c0_set_platdata(&bast_i2c_info);
+ s3c_nand_set_platdata(&bast_nand_info);
+ s3c24xx_fb_set_platdata(&bast_fb_info);
+ platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
+
+ i2c_register_board_info(0, bast_i2c_devs,
+ ARRAY_SIZE(bast_i2c_devs));
+
+ usb_simtec_init();
+ nor_simtec_init();
+ simtec_audio_add(NULL, true, &bast_audio);
+
+ WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset"));
+
+ s3c_cpufreq_setboard(&bast_cpufreq);
+}
+
+MACHINE_START(BAST, "Simtec-BAST")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .atag_offset = 0x100,
+ .map_io = bast_map_io,
+ .init_irq = s3c2410_init_irq,
+ .init_machine = bast_init,
+ .init_time = bast_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Speyside modules for Cragganmore - board data probing
+//
+// Copyright 2011 Wolfson Microelectronics plc
+// Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio/machine.h>
+
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/mfd/arizona/pdata.h>
+
+#include <linux/regulator/machine.h>
+
+#include <sound/wm0010.h>
+#include <sound/wm2200.h>
+#include <sound/wm5100.h>
+#include <sound/wm8996.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
+
+#include <linux/platform_data/spi-s3c64xx.h>
+
+#include <plat/cpu.h>
+#include <mach/irqs.h>
+
+#include "crag6410.h"
+
+static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
+ .line = S3C64XX_GPC(3),
+};
+
+static struct wm0010_pdata wm0010_pdata = {
+ .gpio_reset = S3C64XX_GPN(6),
+ .reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
+};
+
+static struct spi_board_info wm1253_devs[] = {
+ [0] = {
+ .modalias = "wm0010",
+ .max_speed_hz = 26 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .irq = S3C_EINT(4),
+ .controller_data = &wm0010_spi_csinfo,
+ .platform_data = &wm0010_pdata,
+ },
+};
+
+static struct spi_board_info balblair_devs[] = {
+ [0] = {
+ .modalias = "wm0010",
+ .max_speed_hz = 26 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .irq = S3C_EINT(4),
+ .controller_data = &wm0010_spi_csinfo,
+ .platform_data = &wm0010_pdata,
+ },
+};
+
+static struct wm5100_pdata wm5100_pdata = {
+ .ldo_ena = S3C64XX_GPN(7),
+ .irq_flags = IRQF_TRIGGER_HIGH,
+ .gpio_base = CODEC_GPIO_BASE,
+
+ .in_mode = {
+ WM5100_IN_DIFF,
+ WM5100_IN_DIFF,
+ WM5100_IN_DIFF,
+ WM5100_IN_SE,
+ },
+
+ .hp_pol = CODEC_GPIO_BASE + 3,
+ .jack_modes = {
+ { WM5100_MICDET_MICBIAS3, 0, 0 },
+ { WM5100_MICDET_MICBIAS2, 1, 1 },
+ },
+
+ .gpio_defaults = {
+ 0,
+ 0,
+ 0,
+ 0,
+ 0x2, /* IRQ: CMOS output */
+ 0x3, /* CLKOUT: CMOS output */
+ },
+};
+
+static struct wm8996_retune_mobile_config wm8996_retune[] = {
+ {
+ .name = "Sub LPF",
+ .rate = 48000,
+ .regs = {
+ 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+ 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+ 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+ },
+ },
+ {
+ .name = "Sub HPF",
+ .rate = 48000,
+ .regs = {
+ 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+ 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+ 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+ },
+ },
+};
+
+static struct wm8996_pdata wm8996_pdata __initdata = {
+ .ldo_ena = S3C64XX_GPN(7),
+ .gpio_base = CODEC_GPIO_BASE,
+ .micdet_def = 1,
+ .inl_mode = WM8996_DIFFERRENTIAL_1,
+ .inr_mode = WM8996_DIFFERRENTIAL_1,
+
+ .irq_flags = IRQF_TRIGGER_RISING,
+
+ .gpio_default = {
+ 0x8001, /* GPIO1 == ADCLRCLK1 */
+ 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+ 0x0141, /* GPIO3 == HP_SEL */
+ 0x0002, /* GPIO4 == IRQ */
+ 0x020e, /* GPIO5 == CLKOUT */
+ },
+
+ .retune_mobile_cfgs = wm8996_retune,
+ .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+ .gpio_init = {
+ 0,
+ WM8962_GPIO_FN_OPCLK,
+ WM8962_GPIO_FN_DMICCLK,
+ 0,
+ 0x8000 | WM8962_GPIO_FN_DMICDAT,
+ WM8962_GPIO_FN_IRQ, /* Open drain mode */
+ },
+ .in4_dc_measure = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+ .irq_high = false,
+ .irq_cmos = false,
+};
+
+static const struct i2c_board_info wm1254_devs[] = {
+ { I2C_BOARD_INFO("wm8996", 0x1a),
+ .platform_data = &wm8996_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+ { I2C_BOARD_INFO("wm9081", 0x6c),
+ .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1255_devs[] = {
+ { I2C_BOARD_INFO("wm5100", 0x1a),
+ .platform_data = &wm5100_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+ { I2C_BOARD_INFO("wm9081", 0x6c),
+ .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1259_devs[] = {
+ { I2C_BOARD_INFO("wm8962", 0x1a),
+ .platform_data = &wm8962_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+};
+
+static struct regulator_init_data wm8994_ldo1 = {
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data wm8994_ldo2 = {
+ .supply_regulator = "WALLVDD",
+};
+
+static struct wm8994_pdata wm8994_pdata = {
+ .gpio_base = CODEC_GPIO_BASE,
+ .micb2_delay = 150,
+ .gpio_defaults = {
+ 0x3, /* IRQ out, active high, CMOS */
+ },
+ .ldo = {
+ { .init_data = &wm8994_ldo1, },
+ { .init_data = &wm8994_ldo2, },
+ },
+};
+
+static const struct i2c_board_info wm1277_devs[] = {
+ { I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */
+ .platform_data = &wm8994_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ .dev_name = "wm8958",
+ },
+};
+
+static struct gpiod_lookup_table wm8994_gpiod_table = {
+ .dev_id = "i2c-wm8958", /* I2C device name */
+ .table = {
+ GPIO_LOOKUP("GPION", 6,
+ "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPION", 4,
+ "wlf,ldo2ena", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct arizona_pdata wm5102_reva_pdata = {
+ .gpio_base = CODEC_GPIO_BASE,
+ .irq_flags = IRQF_TRIGGER_HIGH,
+ .micd_pol_gpio = CODEC_GPIO_BASE + 4,
+ .micd_rate = 6,
+ .gpio_defaults = {
+ [2] = 0x10000, /* AIF3TXLRCLK */
+ [3] = 0x4, /* OPCLK */
+ },
+};
+
+static struct s3c64xx_spi_csinfo codec_spi_csinfo = {
+ .line = S3C64XX_GPN(5),
+};
+
+static struct spi_board_info wm5102_reva_spi_devs[] = {
+ [0] = {
+ .modalias = "wm5102",
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .mode = SPI_MODE_0,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE +
+ WM831X_IRQ_GPIO_2,
+ .controller_data = &codec_spi_csinfo,
+ .platform_data = &wm5102_reva_pdata,
+ },
+};
+
+static struct gpiod_lookup_table wm5102_reva_gpiod_table = {
+ .dev_id = "spi0.1", /* SPI device name */
+ .table = {
+ GPIO_LOOKUP("GPION", 7,
+ "wlf,ldoena", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct arizona_pdata wm5102_pdata = {
+ .gpio_base = CODEC_GPIO_BASE,
+ .irq_flags = IRQF_TRIGGER_HIGH,
+ .micd_pol_gpio = CODEC_GPIO_BASE + 2,
+ .gpio_defaults = {
+ [2] = 0x10000, /* AIF3TXLRCLK */
+ [3] = 0x4, /* OPCLK */
+ },
+};
+
+static struct spi_board_info wm5102_spi_devs[] = {
+ [0] = {
+ .modalias = "wm5102",
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .mode = SPI_MODE_0,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE +
+ WM831X_IRQ_GPIO_2,
+ .controller_data = &codec_spi_csinfo,
+ .platform_data = &wm5102_pdata,
+ },
+};
+
+static struct gpiod_lookup_table wm5102_gpiod_table = {
+ .dev_id = "spi0.1", /* SPI device name */
+ .table = {
+ GPIO_LOOKUP("GPION", 7,
+ "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct spi_board_info wm5110_spi_devs[] = {
+ [0] = {
+ .modalias = "wm5110",
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .mode = SPI_MODE_0,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE +
+ WM831X_IRQ_GPIO_2,
+ .controller_data = &codec_spi_csinfo,
+ .platform_data = &wm5102_reva_pdata,
+ },
+};
+
+static const struct i2c_board_info wm6230_i2c_devs[] = {
+ { I2C_BOARD_INFO("wm9081", 0x6c),
+ .platform_data = &wm9081_pdata, },
+};
+
+static struct wm2200_pdata wm2200_pdata = {
+ .ldo_ena = S3C64XX_GPN(7),
+ .gpio_defaults = {
+ [2] = 0x0005, /* GPIO3 24.576MHz output clock */
+ },
+};
+
+static const struct i2c_board_info wm2200_i2c[] = {
+ { I2C_BOARD_INFO("wm2200", 0x3a),
+ .platform_data = &wm2200_pdata, },
+};
+
+static const struct {
+ u8 id;
+ u8 rev;
+ const char *name;
+ const struct i2c_board_info *i2c_devs;
+ int num_i2c_devs;
+ const struct spi_board_info *spi_devs;
+ int num_spi_devs;
+
+ struct gpiod_lookup_table *gpiod_table;
+} gf_mods[] = {
+ { .id = 0x01, .rev = 0xff, .name = "1250-EV1 Springbank" },
+ { .id = 0x02, .rev = 0xff, .name = "1251-EV1 Jura" },
+ { .id = 0x03, .rev = 0xff, .name = "1252-EV1 Glenlivet" },
+ { .id = 0x06, .rev = 0xff, .name = "WM8997-6721-CS96-EV1 Lapraoig" },
+ { .id = 0x07, .rev = 0xff, .name = "WM5110-6271 Deanston",
+ .spi_devs = wm5110_spi_devs,
+ .num_spi_devs = ARRAY_SIZE(wm5110_spi_devs) },
+ { .id = 0x08, .rev = 0xff, .name = "WM8903-6102 Tamdhu" },
+ { .id = 0x09, .rev = 0xff, .name = "WM1811A-6305 Adelphi" },
+ { .id = 0x0a, .rev = 0xff, .name = "WM8996-6272 Blackadder" },
+ { .id = 0x0b, .rev = 0xff, .name = "WM8994-6235 Benromach" },
+ { .id = 0x11, .rev = 0xff, .name = "6249-EV2 Glenfarclas", },
+ { .id = 0x14, .rev = 0xff, .name = "6271-EV1 Lochnagar" },
+ { .id = 0x15, .rev = 0xff, .name = "6320-EV1 Bells",
+ .i2c_devs = wm6230_i2c_devs,
+ .num_i2c_devs = ARRAY_SIZE(wm6230_i2c_devs) },
+ { .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
+ { .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
+ { .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
+ .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
+ { .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
+ { .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
+ { .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",
+ .spi_devs = balblair_devs,
+ .num_spi_devs = ARRAY_SIZE(balblair_devs) },
+ { .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu",
+ .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+ { .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory",
+ .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
+ { .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman",
+ .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+ { .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
+ { .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
+ .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs),
+ .gpiod_table = &wm8994_gpiod_table },
+ { .id = 0x3e, .rev = 0, .name = "WM5102-6271-EV1-CS127 Amrut",
+ .spi_devs = wm5102_reva_spi_devs,
+ .num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs),
+ .gpiod_table = &wm5102_reva_gpiod_table },
+ { .id = 0x3e, .rev = -1, .name = "WM5102-6271-EV1-CS127 Amrut",
+ .spi_devs = wm5102_spi_devs,
+ .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs),
+ .gpiod_table = &wm5102_gpiod_table },
+ { .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1",
+ .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
+};
+
+static int wlf_gf_module_probe(struct i2c_client *i2c)
+{
+ int ret, i, j, id, rev;
+
+ ret = i2c_smbus_read_byte_data(i2c, 0);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
+ return ret;
+ }
+
+ id = (ret & 0xfe) >> 2;
+ rev = ret & 0x3;
+ for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
+ if (id == gf_mods[i].id && (gf_mods[i].rev == 0xff ||
+ rev == gf_mods[i].rev))
+ break;
+
+ gpiod_add_lookup_table(&wm5102_reva_gpiod_table);
+ gpiod_add_lookup_table(&wm5102_gpiod_table);
+ gpiod_add_lookup_table(&wm8994_gpiod_table);
+
+ if (i < ARRAY_SIZE(gf_mods)) {
+ dev_info(&i2c->dev, "%s revision %d\n",
+ gf_mods[i].name, rev + 1);
+
+ for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
+ if (IS_ERR(i2c_new_client_device(i2c->adapter,
+ &(gf_mods[i].i2c_devs[j]))))
+ dev_err(&i2c->dev, "Failed to register\n");
+ }
+
+ spi_register_board_info(gf_mods[i].spi_devs,
+ gf_mods[i].num_spi_devs);
+
+ if (gf_mods[i].gpiod_table)
+ gpiod_add_lookup_table(gf_mods[i].gpiod_table);
+ } else {
+ dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
+ id, rev + 1);
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id wlf_gf_module_id[] = {
+ { "wlf-gf-module", 0 },
+ { }
+};
+
+static struct i2c_driver wlf_gf_module_driver = {
+ .driver = {
+ .name = "wlf-gf-module"
+ },
+ .probe_new = wlf_gf_module_probe,
+ .id_table = wlf_gf_module_id,
+};
+
+static int __init wlf_gf_module_register(void)
+{
+ if (!soc_is_s3c64xx())
+ return 0;
+
+ return i2c_add_driver(&wlf_gf_module_driver);
+}
+device_initcall(wlf_gf_module_register);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2011 Wolfson Microelectronics plc
+// Mark Brown <broonie@opensource.wolfsonmicro.com>
+//
+// Copyright 2011 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/leds.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/dm9000.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio/driver.h>
+#include <linux/spi/spi.h>
+
+#include <linux/platform_data/pca953x.h>
+#include <linux/platform_data/s3c-hsotg.h>
+
+#include <video/platform_lcd.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <sound/wm1250-ev1.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <video/samsung_fimd.h>
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
+
+#include <plat/fb.h>
+#include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <linux/platform_data/spi-s3c64xx.h>
+
+#include <plat/keypad.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <linux/soc/samsung/s3c-adc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/pm.h>
+
+#include "s3c64xx.h"
+#include "crag6410.h"
+#include "regs-gpio-memport-s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-sys-s3c64xx.h"
+
+/* serial port setup */
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static struct pwm_lookup crag6410_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 100000,
+ PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data crag6410_backlight_data = {
+ .max_brightness = 1000,
+ .dft_brightness = 600,
+};
+
+static struct platform_device crag6410_backlight_device = {
+ .name = "pwm-backlight",
+ .id = -1,
+ .dev = {
+ .parent = &samsung_device_pwm.dev,
+ .platform_data = &crag6410_backlight_data,
+ },
+};
+
+static void crag6410_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
+{
+ pr_debug("%s: setting power %d\n", __func__, power);
+
+ if (power) {
+ gpio_set_value(S3C64XX_GPB(0), 1);
+ msleep(1);
+ s3c_gpio_cfgpin(S3C64XX_GPF(14), S3C_GPIO_SFN(2));
+ } else {
+ gpio_direction_output(S3C64XX_GPF(14), 0);
+ gpio_set_value(S3C64XX_GPB(0), 0);
+ }
+}
+
+static struct platform_device crag6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .id = -1,
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &(struct plat_lcd_data) {
+ .set_power = crag6410_lcd_power_set,
+ },
+};
+
+/* 640x480 URT */
+static struct s3c_fb_pd_win crag6410_fb_win0 = {
+ .max_bpp = 32,
+ .default_bpp = 16,
+ .xres = 640,
+ .yres = 480,
+ .virtual_y = 480 * 2,
+ .virtual_x = 640,
+};
+
+static struct fb_videomode crag6410_lcd_timing = {
+ .left_margin = 150,
+ .right_margin = 80,
+ .upper_margin = 40,
+ .lower_margin = 5,
+ .hsync_len = 40,
+ .vsync_len = 5,
+ .xres = 640,
+ .yres = 480,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata crag6410_lcd_pdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .vtiming = &crag6410_lcd_timing,
+ .win[0] = &crag6410_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* 2x6 keypad */
+
+static uint32_t crag6410_keymap[] = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 0, KEY_VOLUMEUP),
+ KEY(0, 1, KEY_HOME),
+ KEY(0, 2, KEY_VOLUMEDOWN),
+ KEY(0, 3, KEY_HELP),
+ KEY(0, 4, KEY_MENU),
+ KEY(0, 5, KEY_MEDIA),
+ KEY(1, 0, 232),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_LEFT),
+ KEY(1, 3, KEY_UP),
+ KEY(1, 4, KEY_RIGHT),
+ KEY(1, 5, KEY_CAMERA),
+};
+
+static struct matrix_keymap_data crag6410_keymap_data = {
+ .keymap = crag6410_keymap,
+ .keymap_size = ARRAY_SIZE(crag6410_keymap),
+};
+
+static struct samsung_keypad_platdata crag6410_keypad_data = {
+ .keymap_data = &crag6410_keymap_data,
+ .rows = 2,
+ .cols = 6,
+};
+
+static struct gpio_keys_button crag6410_gpio_keys[] = {
+ [0] = {
+ .code = KEY_SUSPEND,
+ .gpio = S3C64XX_GPL(10), /* EINT 18 */
+ .type = EV_KEY,
+ .wakeup = 1,
+ .active_low = 1,
+ },
+ [1] = {
+ .code = SW_FRONT_PROXIMITY,
+ .gpio = S3C64XX_GPN(11), /* EINT 11 */
+ .type = EV_SW,
+ },
+};
+
+static struct gpio_keys_platform_data crag6410_gpio_keydata = {
+ .buttons = crag6410_gpio_keys,
+ .nbuttons = ARRAY_SIZE(crag6410_gpio_keys),
+};
+
+static struct platform_device crag6410_gpio_keydev = {
+ .name = "gpio-keys",
+ .id = 0,
+ .dev.platform_data = &crag6410_gpio_keydata,
+};
+
+static struct resource crag6410_dm9k_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5, 2),
+ [1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5 + (1 << 8), 2),
+ [2] = DEFINE_RES_NAMED(S3C_EINT(17), 1, NULL, IORESOURCE_IRQ \
+ | IORESOURCE_IRQ_HIGHLEVEL),
+};
+
+static struct dm9000_plat_data mini6410_dm9k_pdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device crag6410_dm9k_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(crag6410_dm9k_resource),
+ .resource = crag6410_dm9k_resource,
+ .dev.platform_data = &mini6410_dm9k_pdata,
+};
+
+static struct resource crag6410_mmgpio_resource[] = {
+ [0] = DEFINE_RES_MEM_NAMED(S3C64XX_PA_XM0CSN4, 1, "dat"),
+};
+
+static struct platform_device crag6410_mmgpio = {
+ .name = "basic-mmio-gpio",
+ .id = -1,
+ .resource = crag6410_mmgpio_resource,
+ .num_resources = ARRAY_SIZE(crag6410_mmgpio_resource),
+ .dev.platform_data = &(struct bgpio_pdata) {
+ .base = MMGPIO_GPIO_BASE,
+ },
+};
+
+static struct platform_device speyside_device = {
+ .name = "speyside",
+ .id = -1,
+};
+
+static struct platform_device lowland_device = {
+ .name = "lowland",
+ .id = -1,
+};
+
+static struct platform_device tobermory_device = {
+ .name = "tobermory",
+ .id = -1,
+};
+
+static struct platform_device littlemill_device = {
+ .name = "littlemill",
+ .id = -1,
+};
+
+static struct platform_device bells_wm2200_device = {
+ .name = "bells",
+ .id = 0,
+};
+
+static struct platform_device bells_wm5102_device = {
+ .name = "bells",
+ .id = 1,
+};
+
+static struct platform_device bells_wm5110_device = {
+ .name = "bells",
+ .id = 2,
+};
+
+static struct regulator_consumer_supply wallvdd_consumers[] = {
+ REGULATOR_SUPPLY("SPKVDD", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
+
+ REGULATOR_SUPPLY("SPKVDDL", "spi0.1"),
+ REGULATOR_SUPPLY("SPKVDDR", "spi0.1"),
+
+ REGULATOR_SUPPLY("DC1VDD", "0-0034"),
+ REGULATOR_SUPPLY("DC2VDD", "0-0034"),
+ REGULATOR_SUPPLY("DC3VDD", "0-0034"),
+ REGULATOR_SUPPLY("LDO1VDD", "0-0034"),
+ REGULATOR_SUPPLY("LDO2VDD", "0-0034"),
+ REGULATOR_SUPPLY("LDO4VDD", "0-0034"),
+ REGULATOR_SUPPLY("LDO5VDD", "0-0034"),
+ REGULATOR_SUPPLY("LDO6VDD", "0-0034"),
+ REGULATOR_SUPPLY("LDO7VDD", "0-0034"),
+ REGULATOR_SUPPLY("LDO8VDD", "0-0034"),
+ REGULATOR_SUPPLY("LDO9VDD", "0-0034"),
+ REGULATOR_SUPPLY("LDO10VDD", "0-0034"),
+ REGULATOR_SUPPLY("LDO11VDD", "0-0034"),
+
+ REGULATOR_SUPPLY("DC1VDD", "1-0034"),
+ REGULATOR_SUPPLY("DC2VDD", "1-0034"),
+ REGULATOR_SUPPLY("DC3VDD", "1-0034"),
+ REGULATOR_SUPPLY("LDO1VDD", "1-0034"),
+ REGULATOR_SUPPLY("LDO2VDD", "1-0034"),
+ REGULATOR_SUPPLY("LDO4VDD", "1-0034"),
+ REGULATOR_SUPPLY("LDO5VDD", "1-0034"),
+ REGULATOR_SUPPLY("LDO6VDD", "1-0034"),
+ REGULATOR_SUPPLY("LDO7VDD", "1-0034"),
+ REGULATOR_SUPPLY("LDO8VDD", "1-0034"),
+ REGULATOR_SUPPLY("LDO9VDD", "1-0034"),
+ REGULATOR_SUPPLY("LDO10VDD", "1-0034"),
+ REGULATOR_SUPPLY("LDO11VDD", "1-0034"),
+};
+
+static struct regulator_init_data wallvdd_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wallvdd_consumers),
+ .consumer_supplies = wallvdd_consumers,
+};
+
+static struct fixed_voltage_config wallvdd_pdata = {
+ .supply_name = "WALLVDD",
+ .microvolts = 5000000,
+ .init_data = &wallvdd_data,
+};
+
+static struct platform_device wallvdd_device = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .dev = {
+ .platform_data = &wallvdd_pdata,
+ },
+};
+
+static struct platform_device *crag6410_devices[] __initdata = {
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc2,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_fb,
+ &s3c_device_ohci,
+ &s3c_device_usb_hsotg,
+ &samsung_device_pwm,
+ &s3c64xx_device_iis0,
+ &s3c64xx_device_iis1,
+ &samsung_device_keypad,
+ &crag6410_gpio_keydev,
+ &crag6410_dm9k_device,
+ &s3c64xx_device_spi0,
+ &crag6410_mmgpio,
+ &crag6410_lcd_powerdev,
+ &crag6410_backlight_device,
+ &speyside_device,
+ &tobermory_device,
+ &littlemill_device,
+ &lowland_device,
+ &bells_wm2200_device,
+ &bells_wm5102_device,
+ &bells_wm5110_device,
+ &wallvdd_device,
+};
+
+static struct pca953x_platform_data crag6410_pca_data = {
+ .gpio_base = PCA935X_GPIO_BASE,
+ .irq_base = -1,
+};
+
+/* VDDARM is controlled by DVS1 connected to GPK(0) */
+static struct wm831x_buckv_pdata vddarm_pdata = {
+ .dvs_control_src = 1,
+};
+
+static struct regulator_consumer_supply vddarm_consumers[] = {
+ REGULATOR_SUPPLY("vddarm", NULL),
+};
+
+static struct regulator_init_data vddarm = {
+ .constraints = {
+ .name = "VDDARM",
+ .min_uV = 1000000,
+ .max_uV = 1300000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
+ .consumer_supplies = vddarm_consumers,
+ .supply_regulator = "WALLVDD",
+ .driver_data = &vddarm_pdata,
+};
+
+static struct regulator_consumer_supply vddint_consumers[] = {
+ REGULATOR_SUPPLY("vddint", NULL),
+};
+
+static struct regulator_init_data vddint = {
+ .constraints = {
+ .name = "VDDINT",
+ .min_uV = 1000000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vddint_consumers),
+ .consumer_supplies = vddint_consumers,
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddmem = {
+ .constraints = {
+ .name = "VDDMEM",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data vddsys = {
+ .constraints = {
+ .name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_consumer_supply vddmmc_consumers[] = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
+};
+
+static struct regulator_init_data vddmmc = {
+ .constraints = {
+ .name = "VDDMMC,UH",
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vddmmc_consumers),
+ .consumer_supplies = vddmmc_consumers,
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddotgi = {
+ .constraints = {
+ .name = "VDDOTGi",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddotg = {
+ .constraints = {
+ .name = "VDDOTG",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddhi = {
+ .constraints = {
+ .name = "VDDHI",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddadc = {
+ .constraints = {
+ .name = "VDDADC,VDDDAC",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddmem0 = {
+ .constraints = {
+ .name = "VDDMEM0",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddpll = {
+ .constraints = {
+ .name = "VDDPLL",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddlcd = {
+ .constraints = {
+ .name = "VDDLCD",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data vddalive = {
+ .constraints = {
+ .name = "VDDALIVE",
+ .always_on = 1,
+ },
+ .supply_regulator = "WALLVDD",
+};
+
+static struct wm831x_backup_pdata banff_backup_pdata = {
+ .charger_enable = 1,
+ .vlim = 2500, /* mV */
+ .ilim = 200, /* uA */
+};
+
+static struct wm831x_status_pdata banff_red_led = {
+ .name = "banff:red:",
+ .default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_status_pdata banff_green_led = {
+ .name = "banff:green:",
+ .default_src = WM831X_STATUS_MANUAL,
+};
+
+static struct wm831x_touch_pdata touch_pdata = {
+ .data_irq = S3C_EINT(26),
+ .pd_irq = S3C_EINT(27),
+};
+
+static struct wm831x_pdata crag_pmic_pdata = {
+ .wm831x_num = 1,
+ .irq_base = BANFF_PMIC_IRQ_BASE,
+ .gpio_base = BANFF_PMIC_GPIO_BASE,
+ .soft_shutdown = true,
+
+ .backup = &banff_backup_pdata,
+
+ .gpio_defaults = {
+ /* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
+ [4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
+ /* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
+ [10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
+ /* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
+ [11] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x7,
+ },
+
+ .dcdc = {
+ &vddarm, /* DCDC1 */
+ &vddint, /* DCDC2 */
+ &vddmem, /* DCDC3 */
+ },
+
+ .ldo = {
+ &vddsys, /* LDO1 */
+ &vddmmc, /* LDO2 */
+ NULL, /* LDO3 */
+ &vddotgi, /* LDO4 */
+ &vddotg, /* LDO5 */
+ &vddhi, /* LDO6 */
+ &vddadc, /* LDO7 */
+ &vddmem0, /* LDO8 */
+ &vddpll, /* LDO9 */
+ &vddlcd, /* LDO10 */
+ &vddalive, /* LDO11 */
+ },
+
+ .status = {
+ &banff_green_led,
+ &banff_red_led,
+ },
+
+ .touch = &touch_pdata,
+};
+
+/*
+ * VDDARM is eventually ending up as a regulator hanging on the MFD cell device
+ * "wm831x-buckv.1" spawn from drivers/mfd/wm831x-core.c.
+ *
+ * From the note on the platform data we can see that this is clearly DVS1
+ * and assigned as dcdc1 resource to the MFD core which sets .id of the cell
+ * spawning the DVS1 platform device to 1, then the cell platform device
+ * name is calculated from 10*instance + id resulting in the device name
+ * "wm831x-buckv.11"
+ */
+static struct gpiod_lookup_table crag_pmic_gpiod_table = {
+ .dev_id = "wm831x-buckv.11",
+ .table = {
+ GPIO_LOOKUP("GPIOK", 0, "dvs", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct i2c_board_info i2c_devs0[] = {
+ { I2C_BOARD_INFO("24c08", 0x50), },
+ { I2C_BOARD_INFO("tca6408", 0x20),
+ .platform_data = &crag6410_pca_data,
+ },
+ { I2C_BOARD_INFO("wm8312", 0x34),
+ .platform_data = &crag_pmic_pdata,
+ .irq = S3C_EINT(23),
+ },
+};
+
+static struct s3c2410_platform_i2c i2c0_pdata = {
+ .frequency = 400000,
+};
+
+static struct regulator_consumer_supply pvdd_1v2_consumers[] = {
+ REGULATOR_SUPPLY("DCVDD", "spi0.0"),
+ REGULATOR_SUPPLY("AVDD", "spi0.0"),
+ REGULATOR_SUPPLY("AVDD", "spi0.1"),
+};
+
+static struct regulator_init_data pvdd_1v2 = {
+ .constraints = {
+ .name = "PVDD_1V2",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+
+ .consumer_supplies = pvdd_1v2_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers),
+};
+
+static struct regulator_consumer_supply pvdd_1v8_consumers[] = {
+ REGULATOR_SUPPLY("LDOVDD", "1-001a"),
+ REGULATOR_SUPPLY("PLLVDD", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD1", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD2", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD3", "1-001a"),
+ REGULATOR_SUPPLY("CPVDD", "1-001a"),
+ REGULATOR_SUPPLY("AVDD2", "1-001a"),
+ REGULATOR_SUPPLY("DCVDD", "1-001a"),
+ REGULATOR_SUPPLY("AVDD", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD", "spi0.0"),
+
+ REGULATOR_SUPPLY("DBVDD", "1-003a"),
+ REGULATOR_SUPPLY("LDOVDD", "1-003a"),
+ REGULATOR_SUPPLY("CPVDD", "1-003a"),
+ REGULATOR_SUPPLY("AVDD", "1-003a"),
+ REGULATOR_SUPPLY("DBVDD1", "spi0.1"),
+ REGULATOR_SUPPLY("DBVDD2", "spi0.1"),
+ REGULATOR_SUPPLY("DBVDD3", "spi0.1"),
+ REGULATOR_SUPPLY("LDOVDD", "spi0.1"),
+ REGULATOR_SUPPLY("CPVDD", "spi0.1"),
+};
+
+static struct regulator_init_data pvdd_1v8 = {
+ .constraints = {
+ .name = "PVDD_1V8",
+ .always_on = 1,
+ },
+
+ .consumer_supplies = pvdd_1v8_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
+};
+
+static struct regulator_consumer_supply pvdd_3v3_consumers[] = {
+ REGULATOR_SUPPLY("MICVDD", "1-001a"),
+ REGULATOR_SUPPLY("AVDD1", "1-001a"),
+};
+
+static struct regulator_init_data pvdd_3v3 = {
+ .constraints = {
+ .name = "PVDD_3V3",
+ .always_on = 1,
+ },
+
+ .consumer_supplies = pvdd_3v3_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
+};
+
+static struct wm831x_pdata glenfarclas_pmic_pdata = {
+ .wm831x_num = 2,
+ .irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
+ .gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
+ .soft_shutdown = true,
+
+ .gpio_defaults = {
+ /* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */
+ [0] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+ [1] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+ [2] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
+ },
+
+ .dcdc = {
+ &pvdd_1v2, /* DCDC1 */
+ &pvdd_1v8, /* DCDC2 */
+ &pvdd_3v3, /* DCDC3 */
+ },
+
+ .disable_touch = true,
+};
+
+static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
+ .gpios = {
+ [WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12),
+ [WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12),
+ [WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13),
+ [WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14),
+ [WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8),
+ },
+};
+
+static struct i2c_board_info i2c_devs1[] = {
+ { I2C_BOARD_INFO("wm8311", 0x34),
+ .irq = S3C_EINT(0),
+ .platform_data = &glenfarclas_pmic_pdata },
+
+ { I2C_BOARD_INFO("wlf-gf-module", 0x20) },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x22) },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x24) },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x25) },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x26) },
+
+ { I2C_BOARD_INFO("wm1250-ev1", 0x27),
+ .platform_data = &wm1250_ev1_pdata },
+};
+
+static struct s3c2410_platform_i2c i2c1_pdata = {
+ .frequency = 400000,
+ .bus_num = 1,
+};
+
+static void __init crag6410_map_io(void)
+{
+ s3c64xx_init_io(NULL, 0);
+ s3c64xx_set_xtal_freq(12000000);
+ s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+
+ /* LCD type and Bypass set by bootloader */
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+ .host_caps = MMC_CAP_POWER_OFF_CARD,
+};
+
+static void crag6410_cfg_sdhci0(struct platform_device *dev, int width)
+{
+ /* Set all the necessary GPG pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
+
+ /* force card-detected for prototype 0 */
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_DOWN);
+}
+
+static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .cfg_gpio = crag6410_cfg_sdhci0,
+ .host_caps = MMC_CAP_POWER_OFF_CARD,
+};
+
+static const struct gpio_led gpio_leds[] = {
+ {
+ .name = "d13:green:",
+ .gpio = MMGPIO_GPIO_BASE + 0,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d14:green:",
+ .gpio = MMGPIO_GPIO_BASE + 1,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d15:green:",
+ .gpio = MMGPIO_GPIO_BASE + 2,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d16:green:",
+ .gpio = MMGPIO_GPIO_BASE + 3,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d17:green:",
+ .gpio = MMGPIO_GPIO_BASE + 4,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d18:green:",
+ .gpio = MMGPIO_GPIO_BASE + 5,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d19:green:",
+ .gpio = MMGPIO_GPIO_BASE + 6,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d20:green:",
+ .gpio = MMGPIO_GPIO_BASE + 7,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+};
+
+static const struct gpio_led_platform_data gpio_leds_pdata = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct dwc2_hsotg_plat crag6410_hsotg_pdata;
+
+static void __init crag6410_machine_init(void)
+{
+ /* Open drain IRQs need pullups */
+ s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);
+
+ gpio_request(S3C64XX_GPB(0), "LCD power");
+ gpio_direction_output(S3C64XX_GPB(0), 0);
+
+ gpio_request(S3C64XX_GPF(14), "LCD PWM");
+ gpio_direction_output(S3C64XX_GPF(14), 0); /* turn off */
+
+ gpio_request(S3C64XX_GPB(1), "SD power");
+ gpio_direction_output(S3C64XX_GPB(1), 0);
+
+ gpio_request(S3C64XX_GPF(10), "nRESETSEL");
+ gpio_direction_output(S3C64XX_GPF(10), 1);
+
+ s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
+ s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);
+
+ s3c_i2c0_set_platdata(&i2c0_pdata);
+ s3c_i2c1_set_platdata(&i2c1_pdata);
+ s3c_fb_set_platdata(&crag6410_lcd_pdata);
+ dwc2_hsotg_set_platdata(&crag6410_hsotg_pdata);
+
+ gpiod_add_lookup_table(&crag_pmic_gpiod_table);
+ i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+ samsung_keypad_set_platdata(&crag6410_keypad_data);
+ s3c64xx_spi0_set_platdata(NULL, 0, 2);
+
+ pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
+ platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
+
+ gpio_led_register_device(-1, &gpio_leds_pdata);
+
+ regulator_has_full_constraints();
+
+ s3c64xx_pm_init();
+}
+
+MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
+ /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
+ .atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
+ .init_irq = s3c6410_init_irq,
+ .map_io = crag6410_map_io,
+ .init_machine = crag6410_machine_init,
+ .init_time = samsung_timer_init,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
+//
+// Copyright (C) 2006-2009 by Openmoko, Inc.
+// Authors: Harald Welte <laforge@openmoko.org>
+// Andy Green <andy@openmoko.org>
+// Werner Almesberger <werner@openmoko.org>
+// All rights reserved.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+
+#include <linux/mmc/host.h>
+
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/backlight.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <linux/regulator/machine.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/s3c24xx.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/fb-s3c2410.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <plat/pm.h>
+
+#include "s3c24xx.h"
+#include "gta02.h"
+
+static struct pcf50633 *gta02_pcf;
+
+/*
+ * This gets called frequently when we paniced.
+ */
+
+static long gta02_panic_blink(int state)
+{
+ long delay = 0;
+ char led;
+
+ led = (state) ? 1 : 0;
+ gpio_direction_output(GTA02_GPIO_AUX_LED, led);
+
+ return delay;
+}
+
+
+static struct map_desc gta02_iodesc[] __initdata = {
+ {
+ .virtual = 0xe0000000,
+ .pfn = __phys_to_pfn(S3C2410_CS3 + 0x01000000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ },
+};
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg gta02_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+#ifdef CONFIG_CHARGER_PCF50633
+/*
+ * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
+ * We use this to recognize that we can pull 1A from the USB socket.
+ *
+ * These constants are the measured pcf50633 ADC levels with the 1A
+ * charger / 48K resistor, and with no pulldown resistor.
+ */
+
+#define ADC_NOM_CHG_DETECT_1A 6
+#define ADC_NOM_CHG_DETECT_USB 43
+
+#ifdef CONFIG_PCF50633_ADC
+static void
+gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
+{
+ int ma;
+
+ /* Interpret charger type */
+ if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
+
+ /*
+ * Sanity - stop GPO driving out now that we have a 1A charger
+ * GPO controls USB Host power generation on GTA02
+ */
+ pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
+
+ ma = 1000;
+ } else
+ ma = 100;
+
+ pcf50633_mbc_usb_curlim_set(pcf, ma);
+}
+#endif
+
+static struct delayed_work gta02_charger_work;
+static int gta02_usb_vbus_draw;
+
+static void gta02_charger_worker(struct work_struct *work)
+{
+ if (gta02_usb_vbus_draw) {
+ pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
+ return;
+ }
+
+#ifdef CONFIG_PCF50633_ADC
+ pcf50633_adc_async_read(gta02_pcf,
+ PCF50633_ADCC1_MUX_ADCIN1,
+ PCF50633_ADCC1_AVERAGE_16,
+ gta02_configure_pmu_for_charger,
+ NULL);
+#else
+ /*
+ * If the PCF50633 ADC is disabled we fallback to a
+ * 100mA limit for safety.
+ */
+ pcf50633_mbc_usb_curlim_set(gta02_pcf, 100);
+#endif
+}
+
+#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
+
+static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
+{
+ if (irq == PCF50633_IRQ_USBINS) {
+ schedule_delayed_work(>a02_charger_work,
+ GTA02_CHARGER_CONFIGURE_TIMEOUT);
+
+ return;
+ }
+
+ if (irq == PCF50633_IRQ_USBREM) {
+ cancel_delayed_work_sync(>a02_charger_work);
+ gta02_usb_vbus_draw = 0;
+ }
+}
+
+static void gta02_udc_vbus_draw(unsigned int ma)
+{
+ if (!gta02_pcf)
+ return;
+
+ gta02_usb_vbus_draw = ma;
+
+ schedule_delayed_work(>a02_charger_work,
+ GTA02_CHARGER_CONFIGURE_TIMEOUT);
+}
+#else /* !CONFIG_CHARGER_PCF50633 */
+#define gta02_pmu_event_callback NULL
+#define gta02_udc_vbus_draw NULL
+#endif
+
+static char *gta02_batteries[] = {
+ "battery",
+};
+
+static struct pcf50633_bl_platform_data gta02_backlight_data = {
+ .default_brightness = 0x3f,
+ .default_brightness_limit = 0,
+ .ramp_time = 5,
+};
+
+static struct pcf50633_platform_data gta02_pcf_pdata = {
+ .resumers = {
+ [0] = PCF50633_INT1_USBINS |
+ PCF50633_INT1_USBREM |
+ PCF50633_INT1_ALARM,
+ [1] = PCF50633_INT2_ONKEYF,
+ [2] = PCF50633_INT3_ONKEY1S,
+ [3] = PCF50633_INT4_LOWSYS |
+ PCF50633_INT4_LOWBAT |
+ PCF50633_INT4_HIGHTMP,
+ },
+
+ .batteries = gta02_batteries,
+ .num_batteries = ARRAY_SIZE(gta02_batteries),
+
+ .charger_reference_current_ma = 1000,
+
+ .backlight_data = >a02_backlight_data,
+
+ .reg_init_data = {
+ [PCF50633_REGULATOR_AUTO] = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_DOWN1] = {
+ .constraints = {
+ .min_uV = 1300000,
+ .max_uV = 1600000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_DOWN2] = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+ },
+ [PCF50633_REGULATOR_HCLDO] = {
+ .constraints = {
+ .min_uV = 2000000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [PCF50633_REGULATOR_LDO1] = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO2] = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO3] = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO4] = {
+ .constraints = {
+ .min_uV = 3200000,
+ .max_uV = 3200000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO5] = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ },
+ },
+ [PCF50633_REGULATOR_LDO6] = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ },
+ },
+ [PCF50633_REGULATOR_MEMLDO] = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ },
+ },
+
+ },
+ .mbc_event_callback = gta02_pmu_event_callback,
+};
+
+
+/* NOR Flash. */
+
+#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */
+#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */
+
+static struct physmap_flash_data gta02_nor_flash_data = {
+ .width = 2,
+};
+
+static struct resource gta02_nor_flash_resource =
+ DEFINE_RES_MEM(GTA02_FLASH_BASE, GTA02_FLASH_SIZE);
+
+static struct platform_device gta02_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = >a02_nor_flash_data,
+ },
+ .resource = >a02_nor_flash_resource,
+ .num_resources = 1,
+};
+
+
+static struct platform_device s3c24xx_pwm_device = {
+ .name = "s3c24xx_pwm",
+ .num_resources = 0,
+};
+
+static struct platform_device gta02_dfbmcs320_device = {
+ .name = "dfbmcs320",
+};
+
+static struct i2c_board_info gta02_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("pcf50633", 0x73),
+ .irq = GTA02_IRQ_PCF50633,
+ .platform_data = >a02_pcf_pdata,
+ },
+ {
+ I2C_BOARD_INFO("wm8753", 0x1a),
+ },
+};
+
+static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
+ [0] = {
+ /*
+ * This name is also hard-coded in the boot loaders, so
+ * changing it would would require all users to upgrade
+ * their boot loaders, some of which are stored in a NOR
+ * that is considered to be immutable.
+ */
+ .name = "neo1973-nand",
+ .nr_chips = 1,
+ .flash_bbt = 1,
+ },
+};
+
+/*
+ * Choose a set of timings derived from S3C@2442B MCP54
+ * data sheet (K5D2G13ACM-D075 MCP Memory).
+ */
+
+static struct s3c2410_platform_nand __initdata gta02_nand_info = {
+ .tacls = 0,
+ .twrph0 = 25,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(gta02_nand_sets),
+ .sets = gta02_nand_sets,
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+
+/* Get PMU to set USB current limit accordingly. */
+static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
+ .vbus_draw = gta02_udc_vbus_draw,
+ .pullup_pin = GTA02_GPIO_USB_PULLUP,
+};
+
+/* USB */
+static struct s3c2410_hcd_info gta02_usb_info __initdata = {
+ .port[0] = {
+ .flags = S3C_HCDFLG_USED,
+ },
+ .port[1] = {
+ .flags = 0,
+ },
+};
+
+/* Touchscreen */
+static struct s3c2410_ts_mach_info gta02_ts_info = {
+ .delay = 10000,
+ .presc = 0xff, /* slow as we can go */
+ .oversampling_shift = 2,
+};
+
+/* Buttons */
+static struct gpio_keys_button gta02_buttons[] = {
+ {
+ .gpio = GTA02_GPIO_AUX_KEY,
+ .code = KEY_PHONE,
+ .desc = "Aux",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+ {
+ .gpio = GTA02_GPIO_HOLD_KEY,
+ .code = KEY_PAUSE,
+ .desc = "Hold",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+};
+
+static struct gpio_keys_platform_data gta02_buttons_pdata = {
+ .buttons = gta02_buttons,
+ .nbuttons = ARRAY_SIZE(gta02_buttons),
+};
+
+static struct platform_device gta02_buttons_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = >a02_buttons_pdata,
+ },
+};
+
+static struct gpiod_lookup_table gta02_audio_gpio_table = {
+ .dev_id = "neo1973-audio",
+ .table = {
+ GPIO_LOOKUP("GPIOJ", 2, "amp-shut", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOJ", 1, "hp", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct platform_device gta02_audio = {
+ .name = "neo1973-audio",
+ .id = -1,
+};
+
+static struct gpiod_lookup_table gta02_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static void __init gta02_map_io(void)
+{
+ s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
+ s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+
+/* These are the guys that don't need to be children of PMU. */
+
+static struct platform_device *gta02_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_sdi,
+ &s3c_device_usbgadget,
+ &s3c_device_nand,
+ >a02_nor_flash,
+ &s3c24xx_pwm_device,
+ &s3c_device_iis,
+ &s3c_device_i2c0,
+ >a02_dfbmcs320_device,
+ >a02_buttons_device,
+ &s3c_device_adc,
+ &s3c_device_ts,
+ >a02_audio,
+};
+
+static void gta02_poweroff(void)
+{
+ pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
+}
+
+static void __init gta02_machine_init(void)
+{
+ /* Set the panic callback to turn AUX LED on or off. */
+ panic_blink = gta02_panic_blink;
+
+ s3c_pm_init();
+
+#ifdef CONFIG_CHARGER_PCF50633
+ INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker);
+#endif
+
+ s3c24xx_udc_set_platdata(>a02_udc_cfg);
+ s3c24xx_ts_set_platdata(>a02_ts_info);
+ s3c_ohci_set_platdata(>a02_usb_info);
+ s3c_nand_set_platdata(>a02_nand_info);
+ s3c_i2c0_set_platdata(NULL);
+
+ i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
+ gpiod_add_lookup_table(>a02_audio_gpio_table);
+ gpiod_add_lookup_table(>a02_mmc_gpio_table);
+ platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
+ pm_power_off = gta02_poweroff;
+
+ regulator_has_full_constraints();
+}
+
+static void __init gta02_init_time(void)
+{
+ s3c2442_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+MACHINE_START(NEO1973_GTA02, "GTA02")
+ /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
+ .atag_offset = 0x100,
+ .map_io = gta02_map_io,
+ .init_irq = s3c2442_init_irq,
+ .init_machine = gta02_machine_init,
+ .init_time = gta02_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2003-2005 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// https://www.handhelds.org/projects/h1940.html
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/memblock.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/pda_power.h>
+#include <linux/s3c_adc_battery.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <linux/mmc/host.h>
+#include <linux/export.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include <sound/uda1380.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include <mach/map.h>
+#include <mach/hardware-s3c24xx.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <plat/pm.h>
+
+#include "s3c24xx.h"
+#include "h1940.h"
+
+#define H1940_LATCH ((void __force __iomem *)0xF8000000)
+
+#define H1940_PA_LATCH S3C2410_CS2
+
+#define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END))
+
+#define S3C24XX_PLL_MDIV_SHIFT (12)
+#define S3C24XX_PLL_PDIV_SHIFT (4)
+#define S3C24XX_PLL_SDIV_SHIFT (0)
+
+static struct map_desc h1940_iodesc[] __initdata = {
+ [0] = {
+ .virtual = (unsigned long)H1940_LATCH,
+ .pfn = __phys_to_pfn(H1940_PA_LATCH),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x245,
+ .ulcon = 0x03,
+ .ufcon = 0x00,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .uart_flags = UPF_CONS_FLOW,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ }
+};
+
+/* Board control latch control */
+
+static unsigned int latch_state;
+
+static void h1940_latch_control(unsigned int clear, unsigned int set)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ latch_state &= ~clear;
+ latch_state |= set;
+
+ __raw_writel(latch_state, H1940_LATCH);
+
+ local_irq_restore(flags);
+}
+
+static inline int h1940_gpiolib_to_latch(int offset)
+{
+ return 1 << (offset + 16);
+}
+
+static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ int latch_bit = h1940_gpiolib_to_latch(offset);
+
+ h1940_latch_control(value ? 0 : latch_bit,
+ value ? latch_bit : 0);
+}
+
+static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ h1940_gpiolib_latch_set(chip, offset, value);
+ return 0;
+}
+
+static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
+ unsigned offset)
+{
+ return (latch_state >> (offset + 16)) & 1;
+}
+
+static struct gpio_chip h1940_latch_gpiochip = {
+ .base = H1940_LATCH_GPIO(0),
+ .owner = THIS_MODULE,
+ .label = "H1940_LATCH",
+ .ngpio = 16,
+ .direction_output = h1940_gpiolib_latch_output,
+ .set = h1940_gpiolib_latch_set,
+ .get = h1940_gpiolib_latch_get,
+};
+
+static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
+ .vbus_pin = S3C2410_GPG(5),
+ .vbus_pin_inverted = 1,
+ .pullup_pin = H1940_LATCH_USB_DP,
+};
+
+static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
+ .cfg_gpio = s3c24xx_ts_cfg_gpio,
+};
+
+/*
+ * Set lcd on or off
+ */
+static struct s3c2410fb_display h1940_lcd __initdata = {
+ .lcdcon5= S3C2410_LCDCON5_FRM565 | \
+ S3C2410_LCDCON5_INVVLINE | \
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+ .pixclock = 260000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 8,
+ .right_margin = 20,
+ .hsync_len = 4,
+ .upper_margin = 8,
+ .lower_margin = 7,
+ .vsync_len = 1,
+};
+
+static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
+ .displays = &h1940_lcd,
+ .num_displays = 1,
+ .default_display = 0,
+
+ .lpcsel = 0x02,
+ .gpccon = 0xaa940659,
+ .gpccon_mask = 0xffffc0f0,
+ .gpccon_reg = S3C2410_GPCCON,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+ .gpcup_reg = S3C2410_GPCUP,
+ .gpdcon = 0xaa84aaa0,
+ .gpdcon_mask = 0xffffffff,
+ .gpdcon_reg = S3C2410_GPDCON,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+ .gpdup_reg = S3C2410_GPDUP,
+};
+
+static int power_supply_init(struct device *dev)
+{
+ return gpio_request(S3C2410_GPF(2), "cable plugged");
+}
+
+static int h1940_is_ac_online(void)
+{
+ return !gpio_get_value(S3C2410_GPF(2));
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(S3C2410_GPF(2));
+}
+
+static char *h1940_supplicants[] = {
+ "main-battery",
+ "backup-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = h1940_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = h1940_supplicants,
+ .num_supplicants = ARRAY_SIZE(h1940_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+ [0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
+ | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data =
+ &power_supply_info,
+ },
+ .resource = power_supply_resources,
+ .num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
+ { .volt = 4070, .cur = 162, .level = 100},
+ { .volt = 4040, .cur = 165, .level = 95},
+ { .volt = 4016, .cur = 164, .level = 90},
+ { .volt = 3996, .cur = 166, .level = 85},
+ { .volt = 3971, .cur = 168, .level = 80},
+ { .volt = 3951, .cur = 168, .level = 75},
+ { .volt = 3931, .cur = 170, .level = 70},
+ { .volt = 3903, .cur = 172, .level = 65},
+ { .volt = 3886, .cur = 172, .level = 60},
+ { .volt = 3858, .cur = 176, .level = 55},
+ { .volt = 3842, .cur = 176, .level = 50},
+ { .volt = 3818, .cur = 176, .level = 45},
+ { .volt = 3789, .cur = 180, .level = 40},
+ { .volt = 3769, .cur = 180, .level = 35},
+ { .volt = 3749, .cur = 184, .level = 30},
+ { .volt = 3732, .cur = 184, .level = 25},
+ { .volt = 3716, .cur = 184, .level = 20},
+ { .volt = 3708, .cur = 184, .level = 15},
+ { .volt = 3716, .cur = 96, .level = 10},
+ { .volt = 3700, .cur = 96, .level = 5},
+ { .volt = 3684, .cur = 96, .level = 0},
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
+ { .volt = 4130, .cur = 0, .level = 100},
+ { .volt = 3982, .cur = 0, .level = 50},
+ { .volt = 3854, .cur = 0, .level = 10},
+ { .volt = 3841, .cur = 0, .level = 0},
+};
+
+static int h1940_bat_init(void)
+{
+ int ret;
+
+ ret = gpio_request(H1940_LATCH_SM803_ENABLE, "h1940-charger-enable");
+ if (ret)
+ return ret;
+ gpio_direction_output(H1940_LATCH_SM803_ENABLE, 0);
+
+ return 0;
+
+}
+
+static void h1940_bat_exit(void)
+{
+ gpio_free(H1940_LATCH_SM803_ENABLE);
+}
+
+static void h1940_enable_charger(void)
+{
+ gpio_set_value(H1940_LATCH_SM803_ENABLE, 1);
+}
+
+static void h1940_disable_charger(void)
+{
+ gpio_set_value(H1940_LATCH_SM803_ENABLE, 0);
+}
+
+static struct s3c_adc_bat_pdata h1940_bat_cfg = {
+ .init = h1940_bat_init,
+ .exit = h1940_bat_exit,
+ .enable_charger = h1940_enable_charger,
+ .disable_charger = h1940_disable_charger,
+ .gpio_charge_finished = S3C2410_GPF(3),
+ .gpio_inverted = 1,
+ .lut_noac = bat_lut_noac,
+ .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
+ .lut_acin = bat_lut_acin,
+ .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
+ .volt_channel = 0,
+ .current_channel = 1,
+ .volt_mult = 4056,
+ .current_mult = 1893,
+ .internal_impedance = 200,
+ .backup_volt_channel = 3,
+ /* TODO Check backup volt multiplier */
+ .backup_volt_mult = 4056,
+ .backup_volt_min = 0,
+ .backup_volt_max = 4149288
+};
+
+static struct platform_device h1940_battery = {
+ .name = "s3c-adc-battery",
+ .id = -1,
+ .dev = {
+ .parent = &s3c_device_adc.dev,
+ .platform_data = &h1940_bat_cfg,
+ },
+};
+
+static DEFINE_SPINLOCK(h1940_blink_spin);
+
+int h1940_led_blink_set(struct gpio_desc *desc, int state,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ int blink_gpio, check_gpio1, check_gpio2;
+ int gpio = desc ? desc_to_gpio(desc) : -EINVAL;
+
+ switch (gpio) {
+ case H1940_LATCH_LED_GREEN:
+ blink_gpio = S3C2410_GPA(7);
+ check_gpio1 = S3C2410_GPA(1);
+ check_gpio2 = S3C2410_GPA(3);
+ break;
+ case H1940_LATCH_LED_RED:
+ blink_gpio = S3C2410_GPA(1);
+ check_gpio1 = S3C2410_GPA(7);
+ check_gpio2 = S3C2410_GPA(3);
+ break;
+ default:
+ blink_gpio = S3C2410_GPA(3);
+ check_gpio1 = S3C2410_GPA(1);
+ check_gpio2 = S3C2410_GPA(7);
+ break;
+ }
+
+ if (delay_on && delay_off && !*delay_on && !*delay_off)
+ *delay_on = *delay_off = 500;
+
+ spin_lock(&h1940_blink_spin);
+
+ switch (state) {
+ case GPIO_LED_NO_BLINK_LOW:
+ case GPIO_LED_NO_BLINK_HIGH:
+ if (!gpio_get_value(check_gpio1) &&
+ !gpio_get_value(check_gpio2))
+ gpio_set_value(H1940_LATCH_LED_FLASH, 0);
+ gpio_set_value(blink_gpio, 0);
+ if (gpio_is_valid(gpio))
+ gpio_set_value(gpio, state);
+ break;
+ case GPIO_LED_BLINK:
+ if (gpio_is_valid(gpio))
+ gpio_set_value(gpio, 0);
+ gpio_set_value(H1940_LATCH_LED_FLASH, 1);
+ gpio_set_value(blink_gpio, 1);
+ break;
+ }
+
+ spin_unlock(&h1940_blink_spin);
+
+ return 0;
+}
+EXPORT_SYMBOL(h1940_led_blink_set);
+
+static struct gpio_led h1940_leds_desc[] = {
+ {
+ .name = "Green",
+ .default_trigger = "main-battery-full",
+ .gpio = H1940_LATCH_LED_GREEN,
+ .retain_state_suspended = 1,
+ },
+ {
+ .name = "Red",
+ .default_trigger
+ = "main-battery-charging-blink-full-solid",
+ .gpio = H1940_LATCH_LED_RED,
+ .retain_state_suspended = 1,
+ },
+};
+
+static struct gpio_led_platform_data h1940_leds_pdata = {
+ .num_leds = ARRAY_SIZE(h1940_leds_desc),
+ .leds = h1940_leds_desc,
+ .gpio_blink_set = h1940_led_blink_set,
+};
+
+static struct platform_device h1940_device_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &h1940_leds_pdata,
+ },
+};
+
+static struct platform_device h1940_device_bluetooth = {
+ .name = "h1940-bt",
+ .id = -1,
+};
+
+static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
+{
+ s3c24xx_mci_def_set_power(power_mode, vdd);
+
+ switch (power_mode) {
+ case MMC_POWER_OFF:
+ gpio_set_value(H1940_LATCH_SD_POWER, 0);
+ break;
+ case MMC_POWER_UP:
+ case MMC_POWER_ON:
+ gpio_set_value(H1940_LATCH_SD_POWER, 1);
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
+ .set_power = h1940_set_mmc_power,
+ .ocr_avail = MMC_VDD_32_33,
+};
+
+static struct gpiod_lookup_table h1940_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* Card detect S3C2410_GPF(5) */
+ GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
+ /* Write protect S3C2410_GPH(8) */
+ GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table h1940_audio_gpio_table = {
+ .dev_id = "h1940-audio",
+ .table = {
+ GPIO_LOOKUP("H1940_LATCH",
+ H1940_LATCH_AUDIO_POWER - H1940_LATCH_GPIO(0),
+ "speaker-power", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOG", 4, "hp", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct platform_device h1940_audio = {
+ .name = "h1940-audio",
+ .id = -1,
+};
+
+static struct pwm_lookup h1940_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
+ PWM_POLARITY_NORMAL),
+};
+
+static int h1940_backlight_init(struct device *dev)
+{
+ gpio_request(S3C2410_GPB(0), "Backlight");
+
+ gpio_direction_output(S3C2410_GPB(0), 0);
+ s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+ s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+ gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
+
+ return 0;
+}
+
+static int h1940_backlight_notify(struct device *dev, int brightness)
+{
+ if (!brightness) {
+ gpio_direction_output(S3C2410_GPB(0), 1);
+ gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
+ } else {
+ gpio_direction_output(S3C2410_GPB(0), 0);
+ s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+ s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+ gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
+ }
+ return brightness;
+}
+
+static void h1940_backlight_exit(struct device *dev)
+{
+ gpio_direction_output(S3C2410_GPB(0), 1);
+ gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
+}
+
+
+static struct platform_pwm_backlight_data backlight_data = {
+ .max_brightness = 100,
+ .dft_brightness = 50,
+ .init = h1940_backlight_init,
+ .notify = h1940_backlight_notify,
+ .exit = h1940_backlight_exit,
+};
+
+static struct platform_device h1940_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &samsung_device_pwm.dev,
+ .platform_data = &backlight_data,
+ },
+ .id = -1,
+};
+
+static void h1940_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ int value, retries = 100;
+
+ if (!power) {
+ gpio_set_value(S3C2410_GPC(0), 0);
+ /* wait for 3ac */
+ do {
+ value = gpio_get_value(S3C2410_GPC(6));
+ } while (value && retries--);
+
+ gpio_set_value(H1940_LATCH_LCD_P2, 0);
+ gpio_set_value(H1940_LATCH_LCD_P3, 0);
+ gpio_set_value(H1940_LATCH_LCD_P4, 0);
+
+ gpio_direction_output(S3C2410_GPC(1), 0);
+ gpio_direction_output(S3C2410_GPC(4), 0);
+
+ gpio_set_value(H1940_LATCH_LCD_P1, 0);
+ gpio_set_value(H1940_LATCH_LCD_P0, 0);
+
+ gpio_set_value(S3C2410_GPC(5), 0);
+
+ } else {
+ gpio_set_value(H1940_LATCH_LCD_P0, 1);
+ gpio_set_value(H1940_LATCH_LCD_P1, 1);
+
+ gpio_direction_input(S3C2410_GPC(1));
+ gpio_direction_input(S3C2410_GPC(4));
+ mdelay(10);
+ s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
+
+ gpio_set_value(S3C2410_GPC(5), 1);
+ gpio_set_value(S3C2410_GPC(0), 1);
+
+ gpio_set_value(H1940_LATCH_LCD_P3, 1);
+ gpio_set_value(H1940_LATCH_LCD_P2, 1);
+ gpio_set_value(H1940_LATCH_LCD_P4, 1);
+ }
+}
+
+static struct plat_lcd_data h1940_lcd_power_data = {
+ .set_power = h1940_lcd_power_set,
+};
+
+static struct platform_device h1940_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_lcd.dev,
+ .dev.platform_data = &h1940_lcd_power_data,
+};
+
+static struct uda1380_platform_data uda1380_info = {
+ .gpio_power = H1940_LATCH_UDA_POWER,
+ .gpio_reset = S3C2410_GPA(12),
+ .dac_clk = UDA1380_DAC_CLK_SYSCLK,
+};
+
+static struct i2c_board_info h1940_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("uda1380", 0x1a),
+ .platform_data = &uda1380_info,
+ },
+};
+
+#define DECLARE_BUTTON(p, k, n, w) \
+ { \
+ .gpio = p, \
+ .code = k, \
+ .desc = n, \
+ .wakeup = w, \
+ .active_low = 1, \
+ }
+
+static struct gpio_keys_button h1940_buttons[] = {
+ DECLARE_BUTTON(S3C2410_GPF(0), KEY_POWER, "Power", 1),
+ DECLARE_BUTTON(S3C2410_GPF(6), KEY_ENTER, "Select", 1),
+ DECLARE_BUTTON(S3C2410_GPF(7), KEY_RECORD, "Record", 0),
+ DECLARE_BUTTON(S3C2410_GPG(0), KEY_F11, "Calendar", 0),
+ DECLARE_BUTTON(S3C2410_GPG(2), KEY_F12, "Contacts", 0),
+ DECLARE_BUTTON(S3C2410_GPG(3), KEY_MAIL, "Mail", 0),
+ DECLARE_BUTTON(S3C2410_GPG(6), KEY_LEFT, "Left_arrow", 0),
+ DECLARE_BUTTON(S3C2410_GPG(7), KEY_HOMEPAGE, "Home", 0),
+ DECLARE_BUTTON(S3C2410_GPG(8), KEY_RIGHT, "Right_arrow", 0),
+ DECLARE_BUTTON(S3C2410_GPG(9), KEY_UP, "Up_arrow", 0),
+ DECLARE_BUTTON(S3C2410_GPG(10), KEY_DOWN, "Down_arrow", 0),
+};
+
+static struct gpio_keys_platform_data h1940_buttons_data = {
+ .buttons = h1940_buttons,
+ .nbuttons = ARRAY_SIZE(h1940_buttons),
+};
+
+static struct platform_device h1940_dev_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &h1940_buttons_data,
+ }
+};
+
+static struct platform_device *h1940_devices[] __initdata = {
+ &h1940_dev_buttons,
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_usbgadget,
+ &h1940_device_leds,
+ &h1940_device_bluetooth,
+ &s3c_device_sdi,
+ &s3c_device_rtc,
+ &samsung_device_pwm,
+ &h1940_backlight,
+ &h1940_lcd_powerdev,
+ &s3c_device_adc,
+ &s3c_device_ts,
+ &power_supply,
+ &h1940_battery,
+ &h1940_audio,
+};
+
+static void __init h1940_map_io(void)
+{
+ s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
+ s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+
+ /* setup PM */
+
+#ifdef CONFIG_PM_H1940
+ memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
+ s3c_pm_init();
+
+ /* Add latch gpio chip, set latch initial value */
+ h1940_latch_control(0, 0);
+ WARN_ON(gpiochip_add_data(&h1940_latch_gpiochip, NULL));
+}
+
+static void __init h1940_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init h1940_reserve(void)
+{
+ memblock_reserve(0x30003000, 0x1000);
+ memblock_reserve(0x30081000, 0x1000);
+}
+
+static void __init h1940_init(void)
+{
+ u32 tmp;
+
+ s3c24xx_fb_set_platdata(&h1940_fb_info);
+ gpiod_add_lookup_table(&h1940_mmc_gpio_table);
+ gpiod_add_lookup_table(&h1940_audio_gpio_table);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+ s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
+ s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+ s3c24xx_ts_set_platdata(&h1940_ts_cfg);
+ s3c_i2c0_set_platdata(NULL);
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ tmp = (0x78 << S3C24XX_PLL_MDIV_SHIFT)
+ | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
+ | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
+ writel(tmp, S3C2410_UPLLCON);
+
+ gpio_request(S3C2410_GPC(0), "LCD power");
+ gpio_request(S3C2410_GPC(1), "LCD power");
+ gpio_request(S3C2410_GPC(4), "LCD power");
+ gpio_request(S3C2410_GPC(5), "LCD power");
+ gpio_request(S3C2410_GPC(6), "LCD power");
+ gpio_request(H1940_LATCH_LCD_P0, "LCD power");
+ gpio_request(H1940_LATCH_LCD_P1, "LCD power");
+ gpio_request(H1940_LATCH_LCD_P2, "LCD power");
+ gpio_request(H1940_LATCH_LCD_P3, "LCD power");
+ gpio_request(H1940_LATCH_LCD_P4, "LCD power");
+ gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
+ gpio_direction_output(S3C2410_GPC(0), 0);
+ gpio_direction_output(S3C2410_GPC(1), 0);
+ gpio_direction_output(S3C2410_GPC(4), 0);
+ gpio_direction_output(S3C2410_GPC(5), 0);
+ gpio_direction_input(S3C2410_GPC(6));
+ gpio_direction_output(H1940_LATCH_LCD_P0, 0);
+ gpio_direction_output(H1940_LATCH_LCD_P1, 0);
+ gpio_direction_output(H1940_LATCH_LCD_P2, 0);
+ gpio_direction_output(H1940_LATCH_LCD_P3, 0);
+ gpio_direction_output(H1940_LATCH_LCD_P4, 0);
+ gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
+
+ gpio_request(H1940_LATCH_SD_POWER, "SD power");
+ gpio_direction_output(H1940_LATCH_SD_POWER, 0);
+
+ pwm_add_table(h1940_pwm_lookup, ARRAY_SIZE(h1940_pwm_lookup));
+ platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
+
+ gpio_request(S3C2410_GPA(1), "Red LED blink");
+ gpio_request(S3C2410_GPA(3), "Blue LED blink");
+ gpio_request(S3C2410_GPA(7), "Green LED blink");
+ gpio_request(H1940_LATCH_LED_FLASH, "LED blink");
+ gpio_direction_output(S3C2410_GPA(1), 0);
+ gpio_direction_output(S3C2410_GPA(3), 0);
+ gpio_direction_output(S3C2410_GPA(7), 0);
+ gpio_direction_output(H1940_LATCH_LED_FLASH, 0);
+
+ i2c_register_board_info(0, h1940_i2c_devices,
+ ARRAY_SIZE(h1940_i2c_devices));
+}
+
+MACHINE_START(H1940, "IPAQ-H1940")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+ .map_io = h1940_map_io,
+ .reserve = h1940_reserve,
+ .init_irq = s3c2410_init_irq,
+ .init_machine = h1940_init,
+ .init_time = h1940_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// mach-hmt.c - Platform code for Airgoo HMT
+//
+// Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <video/samsung_fimd.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/gpio-samsung.h>
+#include <plat/fb.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static struct pwm_lookup hmt_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+ 1000000000 / (100 * 256 * 20), PWM_POLARITY_NORMAL),
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+ if (!ret)
+ ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+ return ret;
+}
+
+static int hmt_bl_notify(struct device *dev, int brightness)
+{
+ /*
+ * translate from CIELUV/CIELAB L*->brightness, E.G. from
+ * perceived luminance to light output. Assumes range 0..25600
+ */
+ if (brightness < 0x800) {
+ /* Y = Yn * L / 903.3 */
+ brightness = (100*256 * brightness + 231245/2) / 231245;
+ } else {
+ /* Y = Yn * ((L + 16) / 116 )^3 */
+ int t = (brightness*4 + 16*1024 + 58)/116;
+ brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+ }
+
+ gpio_set_value(S3C64XX_GPB(4), brightness);
+
+ return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+ gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+ .max_brightness = 100 * 256,
+ .dft_brightness = 40 * 256,
+ .init = hmt_bl_init,
+ .notify = hmt_bl_notify,
+ .exit = hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &samsung_device_pwm.dev,
+ .platform_data = &hmt_backlight_data,
+ },
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+ .max_bpp = 32,
+ .default_bpp = 16,
+ .xres = 800,
+ .yres = 480,
+};
+
+static struct fb_videomode hmt_lcd_timing = {
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .vtiming = &hmt_lcd_timing,
+ .win[0] = &hmt_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+ [0] = {
+ .name = "uboot",
+ .size = SZ_512K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "uboot-env1",
+ .size = SZ_256K,
+ .offset = SZ_512K,
+ },
+ [2] = {
+ .name = "uboot-env2",
+ .size = SZ_256K,
+ .offset = SZ_512K + SZ_256K,
+ },
+ [3] = {
+ .name = "kernel",
+ .size = SZ_2M,
+ .offset = SZ_1M,
+ },
+ [4] = {
+ .name = "rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = SZ_1M + SZ_2M,
+ },
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(hmt_nand_part),
+ .partitions = hmt_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(hmt_nand_sets),
+ .sets = hmt_nand_sets,
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+static struct gpio_led hmt_leds[] = {
+ { /* left function keys */
+ .name = "left:blue",
+ .gpio = S3C64XX_GPO(12),
+ .default_trigger = "default-on",
+ },
+ { /* right function keys - red */
+ .name = "right:red",
+ .gpio = S3C64XX_GPO(13),
+ },
+ { /* right function keys - green */
+ .name = "right:green",
+ .gpio = S3C64XX_GPO(14),
+ },
+ { /* right function keys - blue */
+ .name = "right:blue",
+ .gpio = S3C64XX_GPO(15),
+ .default_trigger = "default-on",
+ },
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+ .num_leds = ARRAY_SIZE(hmt_leds),
+ .leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+ &s3c_device_i2c0,
+ &s3c_device_nand,
+ &s3c_device_fb,
+ &s3c_device_ohci,
+ &samsung_device_pwm,
+ &hmt_backlight_device,
+ &hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+ s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+ s3c64xx_set_xtal_freq(12000000);
+ s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init hmt_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_fb_set_platdata(&hmt_lcd_pdata);
+ s3c_nand_set_platdata(&hmt_nand_info);
+
+ gpio_request(S3C64XX_GPC(7), "usb power");
+ gpio_direction_output(S3C64XX_GPC(7), 0);
+ gpio_request(S3C64XX_GPM(0), "usb power");
+ gpio_direction_output(S3C64XX_GPM(0), 1);
+ gpio_request(S3C64XX_GPK(7), "usb power");
+ gpio_direction_output(S3C64XX_GPK(7), 1);
+ gpio_request(S3C64XX_GPF(13), "usb power");
+ gpio_direction_output(S3C64XX_GPF(13), 1);
+
+ pwm_add_table(hmt_pwm_lookup, ARRAY_SIZE(hmt_pwm_lookup));
+ platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+ /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+ .atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
+ .init_irq = s3c6410_init_irq,
+ .map_io = hmt_map_io,
+ .init_machine = hmt_machine_init,
+ .init_time = samsung_timer_init,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2007 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// http://armlinux.simtec.co.uk/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+#include <video/ili9320.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <mach/hardware-s3c24xx.h>
+#include <mach/regs-gpio.h>
+#include <linux/platform_data/fb-s3c2410.h>
+#include <mach/gpio-samsung.h>
+
+#include <asm/mach-types.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include "s3c24xx.h"
+#include "s3c2412-power.h"
+
+static struct map_desc jive_iodesc[] __initdata = {
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg jive_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* Jive flash assignment
+ *
+ * 0x00000000-0x00028000 : uboot
+ * 0x00028000-0x0002c000 : uboot env
+ * 0x0002c000-0x00030000 : spare
+ * 0x00030000-0x00200000 : zimage A
+ * 0x00200000-0x01600000 : cramfs A
+ * 0x01600000-0x017d0000 : zimage B
+ * 0x017d0000-0x02bd0000 : cramfs B
+ * 0x02bd0000-0x03fd0000 : yaffs
+ */
+static struct mtd_partition __initdata jive_imageA_nand_part[] = {
+
+#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
+ /* Don't allow access to the bootloader from linux */
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = (160 * SZ_1K),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+
+ /* spare */
+ {
+ .name = "spare",
+ .offset = (176 * SZ_1K),
+ .size = (16 * SZ_1K),
+ },
+#endif
+
+ /* booted images */
+ {
+ .name = "kernel (ro)",
+ .offset = (192 * SZ_1K),
+ .size = (SZ_2M) - (192 * SZ_1K),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "root (ro)",
+ .offset = (SZ_2M),
+ .size = (20 * SZ_1M),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+
+ /* yaffs */
+ {
+ .name = "yaffs",
+ .offset = (44 * SZ_1M),
+ .size = (20 * SZ_1M),
+ },
+
+ /* bootloader environment */
+ {
+ .name = "env",
+ .offset = (160 * SZ_1K),
+ .size = (16 * SZ_1K),
+ },
+
+ /* upgrade images */
+ {
+ .name = "zimage",
+ .offset = (22 * SZ_1M),
+ .size = (2 * SZ_1M) - (192 * SZ_1K),
+ }, {
+ .name = "cramfs",
+ .offset = (24 * SZ_1M) - (192*SZ_1K),
+ .size = (20 * SZ_1M),
+ },
+};
+
+static struct mtd_partition __initdata jive_imageB_nand_part[] = {
+
+#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
+ /* Don't allow access to the bootloader from linux */
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = (160 * SZ_1K),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+
+ /* spare */
+ {
+ .name = "spare",
+ .offset = (176 * SZ_1K),
+ .size = (16 * SZ_1K),
+ },
+#endif
+
+ /* booted images */
+ {
+ .name = "kernel (ro)",
+ .offset = (22 * SZ_1M),
+ .size = (2 * SZ_1M) - (192 * SZ_1K),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "root (ro)",
+ .offset = (24 * SZ_1M) - (192 * SZ_1K),
+ .size = (20 * SZ_1M),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+
+ /* yaffs */
+ {
+ .name = "yaffs",
+ .offset = (44 * SZ_1M),
+ .size = (20 * SZ_1M),
+ },
+
+ /* bootloader environment */
+ {
+ .name = "env",
+ .offset = (160 * SZ_1K),
+ .size = (16 * SZ_1K),
+ },
+
+ /* upgrade images */
+ {
+ .name = "zimage",
+ .offset = (192 * SZ_1K),
+ .size = (2 * SZ_1M) - (192 * SZ_1K),
+ }, {
+ .name = "cramfs",
+ .offset = (2 * SZ_1M),
+ .size = (20 * SZ_1M),
+ },
+};
+
+static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
+ [0] = {
+ .name = "flash",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(jive_imageA_nand_part),
+ .partitions = jive_imageA_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand __initdata jive_nand_info = {
+ /* set taken from osiris nand timings, possibly still conservative */
+ .tacls = 30,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .sets = jive_nand_sets,
+ .nr_sets = ARRAY_SIZE(jive_nand_sets),
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+static int __init jive_mtdset(char *options)
+{
+ struct s3c2410_nand_set *nand = &jive_nand_sets[0];
+ unsigned long set;
+
+ if (options == NULL || options[0] == '\0')
+ return 0;
+
+ if (kstrtoul(options, 10, &set)) {
+ printk(KERN_ERR "failed to parse mtdset=%s\n", options);
+ return 0;
+ }
+
+ switch (set) {
+ case 1:
+ nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
+ nand->partitions = jive_imageB_nand_part;
+ case 0:
+ /* this is already setup in the nand info */
+ break;
+ default:
+ printk(KERN_ERR "Unknown mtd set %ld specified,"
+ "using default.", set);
+ }
+
+ return 0;
+}
+
+/* parse the mtdset= option given to the kernel command line */
+__setup("mtdset=", jive_mtdset);
+
+/* LCD timing and setup */
+
+#define LCD_XRES (240)
+#define LCD_YRES (320)
+#define LCD_LEFT_MARGIN (12)
+#define LCD_RIGHT_MARGIN (12)
+#define LCD_LOWER_MARGIN (12)
+#define LCD_UPPER_MARGIN (12)
+#define LCD_VSYNC (2)
+#define LCD_HSYNC (2)
+
+#define LCD_REFRESH (60)
+
+#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
+#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
+
+static struct s3c2410fb_display jive_vgg2432a4_display[] = {
+ [0] = {
+ .width = LCD_XRES,
+ .height = LCD_YRES,
+ .xres = LCD_XRES,
+ .yres = LCD_YRES,
+ .left_margin = LCD_LEFT_MARGIN,
+ .right_margin = LCD_RIGHT_MARGIN,
+ .upper_margin = LCD_UPPER_MARGIN,
+ .lower_margin = LCD_LOWER_MARGIN,
+ .hsync_len = LCD_HSYNC,
+ .vsync_len = LCD_VSYNC,
+
+ .pixclock = (1000000000000LL /
+ (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
+
+ .bpp = 16,
+ .type = (S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT),
+
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_INVVDEN |
+ S3C2410_LCDCON5_PWREN),
+ },
+};
+
+/* todo - put into gpio header */
+
+#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
+#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
+
+static struct s3c2410fb_mach_info jive_lcd_config = {
+ .displays = jive_vgg2432a4_display,
+ .num_displays = ARRAY_SIZE(jive_vgg2432a4_display),
+ .default_display = 0,
+
+ /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
+ * and disable the pull down resistors on pins we are using for LCD
+ * data. */
+
+ .gpcup = (0xf << 1) | (0x3f << 10),
+ .gpcup_reg = S3C2410_GPCUP,
+
+ .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
+ S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
+ S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 |
+ S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 |
+ S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7),
+
+ .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) |
+ S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) |
+ S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
+ S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
+ S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+
+ .gpccon_reg = S3C2410_GPCCON,
+
+ .gpdup = (0x3f << 2) | (0x3f << 10),
+
+ .gpdup_reg = S3C2410_GPDUP,
+
+ .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
+ S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
+ S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
+ S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
+ S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
+ S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
+
+ .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) |
+ S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) |
+ S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) |
+ S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
+ S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
+ S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+
+ .gpdcon_reg = S3C2410_GPDCON,
+};
+
+/* ILI9320 support. */
+
+static void jive_lcm_reset(unsigned int set)
+{
+ printk(KERN_DEBUG "%s(%d)\n", __func__, set);
+
+ gpio_set_value(S3C2410_GPG(13), set);
+}
+
+#undef LCD_UPPER_MARGIN
+#define LCD_UPPER_MARGIN 2
+
+static struct ili9320_platdata jive_lcm_config = {
+ .hsize = LCD_XRES,
+ .vsize = LCD_YRES,
+
+ .reset = jive_lcm_reset,
+ .suspend = ILI9320_SUSPEND_DEEP,
+
+ .entry_mode = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
+ .display2 = (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
+ ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
+ .display3 = 0x0,
+ .display4 = 0x0,
+ .rgb_if1 = (ILI9320_RGBIF1_RIM_RGB18 |
+ ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
+ .rgb_if2 = ILI9320_RGBIF2_DPL,
+ .interface2 = 0x0,
+ .interface3 = 0x3,
+ .interface4 = (ILI9320_INTERFACE4_RTNE(16) |
+ ILI9320_INTERFACE4_DIVE(1)),
+ .interface5 = 0x0,
+ .interface6 = 0x0,
+};
+
+/* LCD SPI support */
+
+static struct spi_gpio_platform_data jive_lcd_spi = {
+ .num_chipselect = 1,
+};
+
+static struct platform_device jive_device_lcdspi = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev.platform_data = &jive_lcd_spi,
+};
+
+static struct gpiod_lookup_table jive_lcdspi_gpiod_table = {
+ .dev_id = "spi_gpio",
+ .table = {
+ GPIO_LOOKUP("GPIOG", 8,
+ "sck", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOB", 8,
+ "mosi", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOB", 7,
+ "cs", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+/* WM8750 audio code SPI definition */
+
+static struct spi_gpio_platform_data jive_wm8750_spi = {
+ .num_chipselect = 1,
+};
+
+static struct platform_device jive_device_wm8750 = {
+ .name = "spi_gpio",
+ .id = 2,
+ .dev.platform_data = &jive_wm8750_spi,
+};
+
+static struct gpiod_lookup_table jive_wm8750_gpiod_table = {
+ .dev_id = "spi_gpio",
+ .table = {
+ GPIO_LOOKUP("GPIOB", 4,
+ "sck", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOB", 9,
+ "mosi", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOH", 10,
+ "cs", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+/* JIVE SPI devices. */
+
+static struct spi_board_info __initdata jive_spi_devs[] = {
+ [0] = {
+ .modalias = "VGG2432A4",
+ .bus_num = 1,
+ .chip_select = 0,
+ .mode = SPI_MODE_3, /* CPOL=1, CPHA=1 */
+ .max_speed_hz = 100000,
+ .platform_data = &jive_lcm_config,
+ }, {
+ .modalias = "WM8750",
+ .bus_num = 2,
+ .chip_select = 0,
+ .mode = SPI_MODE_0, /* CPOL=0, CPHA=0 */
+ .max_speed_hz = 100000,
+ },
+};
+
+/* I2C bus and device configuration. */
+
+static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
+ .frequency = 80 * 1000,
+ .flags = S3C_IICFLG_FILTER,
+ .sda_delay = 2,
+};
+
+static struct i2c_board_info jive_i2c_devs[] __initdata = {
+ [0] = {
+ I2C_BOARD_INFO("lis302dl", 0x1c),
+ .irq = IRQ_EINT14,
+ },
+};
+
+/* The platform devices being used. */
+
+static struct platform_device *jive_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_lcd,
+ &jive_device_lcdspi,
+ &jive_device_wm8750,
+ &s3c_device_nand,
+ &s3c_device_usbgadget,
+ &s3c2412_device_dma,
+};
+
+static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
+ .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */
+};
+
+/* Jive power management device */
+
+#ifdef CONFIG_PM
+static int jive_pm_suspend(void)
+{
+ /* Write the magic value u-boot uses to check for resume into
+ * the INFORM0 register, and ensure INFORM1 is set to the
+ * correct address to resume from. */
+
+ __raw_writel(0x2BED, S3C2412_INFORM0);
+ __raw_writel(__pa_symbol(s3c_cpu_resume), S3C2412_INFORM1);
+
+ return 0;
+}
+
+static void jive_pm_resume(void)
+{
+ __raw_writel(0x0, S3C2412_INFORM0);
+}
+
+#else
+#define jive_pm_suspend NULL
+#define jive_pm_resume NULL
+#endif
+
+static struct syscore_ops jive_pm_syscore_ops = {
+ .suspend = jive_pm_suspend,
+ .resume = jive_pm_resume,
+};
+
+static void __init jive_map_io(void)
+{
+ s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
+ s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init jive_init_time(void)
+{
+ s3c2412_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void jive_power_off(void)
+{
+ printk(KERN_INFO "powering system down...\n");
+
+ gpio_request_one(S3C2410_GPC(5), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPC(5));
+}
+
+static void __init jive_machine_init(void)
+{
+ /* register system core operations for managing low level suspend */
+
+ register_syscore_ops(&jive_pm_syscore_ops);
+
+ /* write our sleep configurations for the IO. Pull down all unused
+ * IO, ensure that we have turned off all peripherals we do not
+ * need, and configure the ones we do need. */
+
+ /* Port B sleep */
+
+ __raw_writel(S3C2412_SLPCON_IN(0) |
+ S3C2412_SLPCON_PULL(1) |
+ S3C2412_SLPCON_HIGH(2) |
+ S3C2412_SLPCON_PULL(3) |
+ S3C2412_SLPCON_PULL(4) |
+ S3C2412_SLPCON_PULL(5) |
+ S3C2412_SLPCON_PULL(6) |
+ S3C2412_SLPCON_HIGH(7) |
+ S3C2412_SLPCON_PULL(8) |
+ S3C2412_SLPCON_PULL(9) |
+ S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
+
+ /* Port C sleep */
+
+ __raw_writel(S3C2412_SLPCON_PULL(0) |
+ S3C2412_SLPCON_PULL(1) |
+ S3C2412_SLPCON_PULL(2) |
+ S3C2412_SLPCON_PULL(3) |
+ S3C2412_SLPCON_PULL(4) |
+ S3C2412_SLPCON_PULL(5) |
+ S3C2412_SLPCON_LOW(6) |
+ S3C2412_SLPCON_PULL(6) |
+ S3C2412_SLPCON_PULL(7) |
+ S3C2412_SLPCON_PULL(8) |
+ S3C2412_SLPCON_PULL(9) |
+ S3C2412_SLPCON_PULL(10) |
+ S3C2412_SLPCON_PULL(11) |
+ S3C2412_SLPCON_PULL(12) |
+ S3C2412_SLPCON_PULL(13) |
+ S3C2412_SLPCON_PULL(14) |
+ S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
+
+ /* Port D sleep */
+
+ __raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
+
+ /* Port F sleep */
+
+ __raw_writel(S3C2412_SLPCON_LOW(0) |
+ S3C2412_SLPCON_LOW(1) |
+ S3C2412_SLPCON_LOW(2) |
+ S3C2412_SLPCON_EINT(3) |
+ S3C2412_SLPCON_EINT(4) |
+ S3C2412_SLPCON_EINT(5) |
+ S3C2412_SLPCON_EINT(6) |
+ S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
+
+ /* Port G sleep */
+
+ __raw_writel(S3C2412_SLPCON_IN(0) |
+ S3C2412_SLPCON_IN(1) |
+ S3C2412_SLPCON_IN(2) |
+ S3C2412_SLPCON_IN(3) |
+ S3C2412_SLPCON_IN(4) |
+ S3C2412_SLPCON_IN(5) |
+ S3C2412_SLPCON_IN(6) |
+ S3C2412_SLPCON_IN(7) |
+ S3C2412_SLPCON_PULL(8) |
+ S3C2412_SLPCON_PULL(9) |
+ S3C2412_SLPCON_IN(10) |
+ S3C2412_SLPCON_PULL(11) |
+ S3C2412_SLPCON_PULL(12) |
+ S3C2412_SLPCON_PULL(13) |
+ S3C2412_SLPCON_IN(14) |
+ S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
+
+ /* Port H sleep */
+
+ __raw_writel(S3C2412_SLPCON_PULL(0) |
+ S3C2412_SLPCON_PULL(1) |
+ S3C2412_SLPCON_PULL(2) |
+ S3C2412_SLPCON_PULL(3) |
+ S3C2412_SLPCON_PULL(4) |
+ S3C2412_SLPCON_PULL(5) |
+ S3C2412_SLPCON_PULL(6) |
+ S3C2412_SLPCON_IN(7) |
+ S3C2412_SLPCON_IN(8) |
+ S3C2412_SLPCON_PULL(9) |
+ S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
+
+ /* initialise the power management now we've setup everything. */
+
+ s3c_pm_init();
+
+ /** TODO - check that this is after the cmdline option! */
+ s3c_nand_set_platdata(&jive_nand_info);
+
+ gpio_request(S3C2410_GPG(13), "lcm reset");
+ gpio_direction_output(S3C2410_GPG(13), 0);
+
+ gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL);
+ gpio_free(S3C2410_GPB(6));
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ s3c24xx_udc_set_platdata(&jive_udc_cfg);
+ s3c24xx_fb_set_platdata(&jive_lcd_config);
+
+ spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
+
+ s3c_i2c0_set_platdata(&jive_i2c_cfg);
+ i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
+
+ pm_power_off = jive_power_off;
+
+ gpiod_add_lookup_table(&jive_lcdspi_gpiod_table);
+ gpiod_add_lookup_table(&jive_wm8750_gpiod_table);
+ platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
+}
+
+MACHINE_START(JIVE, "JIVE")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+
+ .init_irq = s3c2412_init_irq,
+ .map_io = jive_map_io,
+ .init_machine = jive_machine_init,
+ .init_time = jive_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
+// Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
+// and modifications by SBZ <sbz@spgui.org> and
+// Weibing <http://weibing.blogbus.com> and
+// Michel Pollet <buserror@gmail.com>
+//
+// For product information, visit https://code.google.com/p/mini2440/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/dm9000.h>
+#include <linux/property.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <mach/irqs.h>
+#include <mach/gpio-samsung.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <sound/s3c24xx_uda134x.h>
+
+#include "s3c24xx.h"
+
+#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
+
+static struct map_desc mini2440_iodesc[] __initdata = {
+ /* nothing to declare, move along */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+
+static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+/* USB device UDC support */
+
+static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
+ .pullup_pin = S3C2410_GPC(5),
+};
+
+
+/* LCD timing and setup */
+
+/*
+ * This macro simplifies the table bellow
+ */
+#define _LCD_DECLARE(_clock, _xres, margin_left, margin_right, hsync, \
+ _yres, margin_top, margin_bottom, vsync, refresh) \
+ .width = _xres, \
+ .xres = _xres, \
+ .height = _yres, \
+ .yres = _yres, \
+ .left_margin = margin_left, \
+ .right_margin = margin_right, \
+ .upper_margin = margin_top, \
+ .lower_margin = margin_bottom, \
+ .hsync_len = hsync, \
+ .vsync_len = vsync, \
+ .pixclock = ((_clock*100000000000LL) / \
+ ((refresh) * \
+ (hsync + margin_left + _xres + margin_right) * \
+ (vsync + margin_top + _yres + margin_bottom))), \
+ .bpp = 16,\
+ .type = (S3C2410_LCDCON1_TFT16BPP |\
+ S3C2410_LCDCON1_TFT)
+
+static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
+ [0] = { /* mini2440 + 3.5" TFT + touchscreen */
+ _LCD_DECLARE(
+ 7, /* The 3.5 is quite fast */
+ 240, 21, 38, 6, /* x timing */
+ 320, 4, 4, 2, /* y timing */
+ 60), /* refresh rate */
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_INVVDEN |
+ S3C2410_LCDCON5_PWREN),
+ },
+ [1] = { /* mini2440 + 7" TFT + touchscreen */
+ _LCD_DECLARE(
+ 10, /* the 7" runs slower */
+ 800, 40, 40, 48, /* x timing */
+ 480, 29, 3, 3, /* y timing */
+ 50), /* refresh rate */
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN),
+ },
+ /* The VGA shield can outout at several resolutions. All share
+ * the same timings, however, anything smaller than 1024x768
+ * will only be displayed in the top left corner of a 1024x768
+ * XGA output unless you add optional dip switches to the shield.
+ * Therefore timings for other resolutions have been omitted here.
+ */
+ [2] = {
+ _LCD_DECLARE(
+ 10,
+ 1024, 1, 2, 2, /* y timing */
+ 768, 200, 16, 16, /* x timing */
+ 24), /* refresh rate, maximum stable,
+ * tested with the FPGA shield
+ */
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_HWSWP),
+ },
+ /* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/
+ [3] = {
+ _LCD_DECLARE(
+ /* clock */
+ 7,
+ /* xres, margin_right, margin_left, hsync */
+ 320, 68, 66, 4,
+ /* yres, margin_top, margin_bottom, vsync */
+ 240, 4, 4, 9,
+ /* refresh rate */
+ 60),
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVDEN |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVCLK |
+ S3C2410_LCDCON5_HWSWP),
+ },
+};
+
+/* todo - put into gpio header */
+
+#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
+#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
+
+static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
+ .displays = &mini2440_lcd_cfg[0], /* not constant! see init */
+ .num_displays = 1,
+ .default_display = 0,
+
+ /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
+ * and disable the pull down resistors on pins we are using for LCD
+ * data.
+ */
+
+ .gpcup = (0xf << 1) | (0x3f << 10),
+
+ .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
+ S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
+ S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 |
+ S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 |
+ S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7),
+
+ .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) |
+ S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) |
+ S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
+ S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
+ S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+
+ .gpccon_reg = S3C2410_GPCCON,
+ .gpcup_reg = S3C2410_GPCUP,
+
+ .gpdup = (0x3f << 2) | (0x3f << 10),
+
+ .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
+ S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
+ S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
+ S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
+ S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
+ S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
+
+ .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) |
+ S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) |
+ S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) |
+ S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
+ S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
+ S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+
+ .gpdcon_reg = S3C2410_GPDCON,
+ .gpdup_reg = S3C2410_GPDUP,
+};
+
+/* MMC/SD */
+
+static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
+ .wprotect_invert = 1,
+ .set_power = s3c24xx_mci_def_set_power,
+ .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+static struct gpiod_lookup_table mini2440_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* Card detect S3C2410_GPG(8) */
+ GPIO_LOOKUP("GPIOG", 8, "cd", GPIO_ACTIVE_LOW),
+ /* Write protect S3C2410_GPH(8) */
+ GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_HIGH),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+/* NAND Flash on MINI2440 board */
+
+static struct mtd_partition mini2440_default_nand_part[] __initdata = {
+ [0] = {
+ .name = "u-boot",
+ .size = SZ_256K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "u-boot-env",
+ .size = SZ_128K,
+ .offset = SZ_256K,
+ },
+ [2] = {
+ .name = "kernel",
+ /* 5 megabytes, for a kernel with no modules
+ * or a uImage with a ramdisk attached
+ */
+ .size = 0x00500000,
+ .offset = SZ_256K + SZ_128K,
+ },
+ [3] = {
+ .name = "root",
+ .offset = SZ_256K + SZ_128K + 0x00500000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
+ .partitions = mini2440_default_nand_part,
+ .flash_bbt = 1, /* we use u-boot to create a BBT */
+ },
+};
+
+static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
+ .tacls = 0,
+ .twrph0 = 25,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(mini2440_nand_sets),
+ .sets = mini2440_nand_sets,
+ .ignore_unset_ecc = 1,
+ .ecc_mode = NAND_ECC_HW,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource mini2440_dm9k_resource[] = {
+ [0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4),
+ [1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4),
+ [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ
+ | IORESOURCE_IRQ_HIGHEDGE),
+};
+
+/*
+ * The DM9000 has no eeprom, and it's MAC address is set by
+ * the bootloader before starting the kernel.
+ */
+static struct dm9000_plat_data mini2440_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device mini2440_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mini2440_dm9k_resource),
+ .resource = mini2440_dm9k_resource,
+ .dev = {
+ .platform_data = &mini2440_dm9k_pdata,
+ },
+};
+
+/* CON5
+ * +--+ /-----\
+ * | | | |
+ * | | | BAT |
+ * | | \_____/
+ * | |
+ * | | +----+ +----+
+ * | | | K5 | | K1 |
+ * | | +----+ +----+
+ * | | +----+ +----+
+ * | | | K4 | | K2 |
+ * | | +----+ +----+
+ * | | +----+ +----+
+ * | | | K6 | | K3 |
+ * | | +----+ +----+
+ * .....
+ */
+static struct gpio_keys_button mini2440_buttons[] = {
+ {
+ .gpio = S3C2410_GPG(0), /* K1 */
+ .code = KEY_F1,
+ .desc = "Button 1",
+ .active_low = 1,
+ },
+ {
+ .gpio = S3C2410_GPG(3), /* K2 */
+ .code = KEY_F2,
+ .desc = "Button 2",
+ .active_low = 1,
+ },
+ {
+ .gpio = S3C2410_GPG(5), /* K3 */
+ .code = KEY_F3,
+ .desc = "Button 3",
+ .active_low = 1,
+ },
+ {
+ .gpio = S3C2410_GPG(6), /* K4 */
+ .code = KEY_POWER,
+ .desc = "Power",
+ .active_low = 1,
+ },
+ {
+ .gpio = S3C2410_GPG(7), /* K5 */
+ .code = KEY_F5,
+ .desc = "Button 5",
+ .active_low = 1,
+ },
+#if 0
+ /* this pin is also known as TCLK1 and seems to already
+ * marked as "in use" somehow in the kernel -- possibly wrongly
+ */
+ {
+ .gpio = S3C2410_GPG(11), /* K6 */
+ .code = KEY_F6,
+ .desc = "Button 6",
+ .active_low = 1,
+ },
+#endif
+};
+
+static struct gpio_keys_platform_data mini2440_button_data = {
+ .buttons = mini2440_buttons,
+ .nbuttons = ARRAY_SIZE(mini2440_buttons),
+};
+
+static struct platform_device mini2440_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &mini2440_button_data,
+ }
+};
+
+/* LEDS */
+
+static struct gpiod_lookup_table mini2440_led1_gpio_table = {
+ .dev_id = "s3c24xx_led.1",
+ .table = {
+ GPIO_LOOKUP("GPB", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table mini2440_led2_gpio_table = {
+ .dev_id = "s3c24xx_led.2",
+ .table = {
+ GPIO_LOOKUP("GPB", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table mini2440_led3_gpio_table = {
+ .dev_id = "s3c24xx_led.3",
+ .table = {
+ GPIO_LOOKUP("GPB", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table mini2440_led4_gpio_table = {
+ .dev_id = "s3c24xx_led.4",
+ .table = {
+ GPIO_LOOKUP("GPB", 8, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table mini2440_backlight_gpio_table = {
+ .dev_id = "s3c24xx_led.5",
+ .table = {
+ GPIO_LOOKUP("GPG", 4, NULL, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct s3c24xx_led_platdata mini2440_led1_pdata = {
+ .name = "led1",
+ .def_trigger = "heartbeat",
+};
+
+static struct s3c24xx_led_platdata mini2440_led2_pdata = {
+ .name = "led2",
+ .def_trigger = "nand-disk",
+};
+
+static struct s3c24xx_led_platdata mini2440_led3_pdata = {
+ .name = "led3",
+ .def_trigger = "mmc0",
+};
+
+static struct s3c24xx_led_platdata mini2440_led4_pdata = {
+ .name = "led4",
+ .def_trigger = "",
+};
+
+static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
+ .name = "backlight",
+ .def_trigger = "backlight",
+};
+
+static struct platform_device mini2440_led1 = {
+ .name = "s3c24xx_led",
+ .id = 1,
+ .dev = {
+ .platform_data = &mini2440_led1_pdata,
+ },
+};
+
+static struct platform_device mini2440_led2 = {
+ .name = "s3c24xx_led",
+ .id = 2,
+ .dev = {
+ .platform_data = &mini2440_led2_pdata,
+ },
+};
+
+static struct platform_device mini2440_led3 = {
+ .name = "s3c24xx_led",
+ .id = 3,
+ .dev = {
+ .platform_data = &mini2440_led3_pdata,
+ },
+};
+
+static struct platform_device mini2440_led4 = {
+ .name = "s3c24xx_led",
+ .id = 4,
+ .dev = {
+ .platform_data = &mini2440_led4_pdata,
+ },
+};
+
+static struct platform_device mini2440_led_backlight = {
+ .name = "s3c24xx_led",
+ .id = 5,
+ .dev = {
+ .platform_data = &mini2440_led_backlight_pdata,
+ },
+};
+
+/* AUDIO */
+
+static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
+ .l3_clk = S3C2410_GPB(4),
+ .l3_mode = S3C2410_GPB(2),
+ .l3_data = S3C2410_GPB(3),
+ .model = UDA134X_UDA1341
+};
+
+static struct platform_device mini2440_audio = {
+ .name = "s3c24xx_uda134x",
+ .id = 0,
+ .dev = {
+ .platform_data = &mini2440_audio_pins,
+ },
+};
+
+/*
+ * I2C devices
+ */
+static const struct property_entry mini2440_at24_properties[] = {
+ PROPERTY_ENTRY_U32("pagesize", 16),
+ { }
+};
+
+static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("24c08", 0x50),
+ .properties = mini2440_at24_properties,
+ },
+};
+
+static struct uda134x_platform_data s3c24xx_uda134x = {
+ .l3 = {
+ .gpio_clk = S3C2410_GPB(4),
+ .gpio_data = S3C2410_GPB(3),
+ .gpio_mode = S3C2410_GPB(2),
+ .use_gpios = 1,
+ .data_hold = 1,
+ .data_setup = 1,
+ .clock_high = 1,
+ .mode_hold = 1,
+ .mode = 1,
+ .mode_setup = 1,
+ },
+ .model = UDA134X_UDA1341,
+};
+
+static struct platform_device uda1340_codec = {
+ .name = "uda134x-codec",
+ .id = -1,
+ .dev = {
+ .platform_data = &s3c24xx_uda134x,
+ },
+};
+
+static struct platform_device *mini2440_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_usbgadget,
+ &mini2440_device_eth,
+ &mini2440_led1,
+ &mini2440_led2,
+ &mini2440_led3,
+ &mini2440_led4,
+ &mini2440_button_device,
+ &s3c_device_nand,
+ &s3c_device_sdi,
+ &s3c2440_device_dma,
+ &s3c_device_iis,
+ &uda1340_codec,
+ &mini2440_audio,
+};
+
+static void __init mini2440_map_io(void)
+{
+ s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
+ s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init mini2440_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+/*
+ * mini2440_features string
+ *
+ * t = Touchscreen present
+ * b = backlight control
+ * c = camera [TODO]
+ * 0-9 LCD configuration
+ *
+ */
+static char mini2440_features_str[12] __initdata = "0tb";
+
+static int __init mini2440_features_setup(char *str)
+{
+ if (str)
+ strlcpy(mini2440_features_str, str,
+ sizeof(mini2440_features_str));
+ return 1;
+}
+
+__setup("mini2440=", mini2440_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+#define FEATURE_BACKLIGHT (1 << 1)
+#define FEATURE_TOUCH (1 << 2)
+#define FEATURE_CAMERA (1 << 3)
+
+struct mini2440_features_t {
+ int count;
+ int done;
+ int lcd_index;
+ struct platform_device *optional[8];
+};
+
+static void __init mini2440_parse_features(
+ struct mini2440_features_t *features,
+ const char *features_str)
+{
+ const char *fp = features_str;
+
+ features->count = 0;
+ features->done = 0;
+ features->lcd_index = -1;
+
+ while (*fp) {
+ char f = *fp++;
+
+ switch (f) {
+ case '0'...'9': /* tft screen */
+ if (features->done & FEATURE_SCREEN) {
+ pr_info("MINI2440: '%c' ignored, screen type already set\n",
+ f);
+ } else {
+ int li = f - '0';
+
+ if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
+ pr_info("MINI2440: '%c' out of range LCD mode\n",
+ f);
+ else {
+ features->optional[features->count++] =
+ &s3c_device_lcd;
+ features->lcd_index = li;
+ }
+ }
+ features->done |= FEATURE_SCREEN;
+ break;
+ case 'b':
+ if (features->done & FEATURE_BACKLIGHT)
+ pr_info("MINI2440: '%c' ignored, backlight already set\n",
+ f);
+ else {
+ features->optional[features->count++] =
+ &mini2440_led_backlight;
+ }
+ features->done |= FEATURE_BACKLIGHT;
+ break;
+ case 't':
+ pr_info("MINI2440: '%c' ignored, touchscreen not compiled in\n",
+ f);
+ break;
+ case 'c':
+ if (features->done & FEATURE_CAMERA)
+ pr_info("MINI2440: '%c' ignored, camera already registered\n",
+ f);
+ else
+ features->optional[features->count++] =
+ &s3c_device_camif;
+ features->done |= FEATURE_CAMERA;
+ break;
+ }
+ }
+}
+
+static void __init mini2440_init(void)
+{
+ struct mini2440_features_t features = { 0 };
+ int i;
+
+ pr_info("MINI2440: Option string mini2440=%s\n",
+ mini2440_features_str);
+
+ /* Parse the feature string */
+ mini2440_parse_features(&features, mini2440_features_str);
+
+ /* turn LCD on */
+ s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
+
+ /* Turn the backlight early on */
+ WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL));
+ gpio_free(S3C2410_GPG(4));
+
+ /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
+ gpio_request_one(S3C2410_GPB(1), GPIOF_IN, NULL);
+ s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
+ gpio_free(S3C2410_GPB(1));
+
+ /* mark the key as input, without pullups (there is one on the board) */
+ for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
+ s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
+ }
+
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
+ if (features.lcd_index != -1) {
+ int li;
+
+ mini2440_fb_info.displays =
+ &mini2440_lcd_cfg[features.lcd_index];
+
+ pr_info("MINI2440: LCD");
+ for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
+ if (li == features.lcd_index)
+ pr_cont(" [%d:%dx%d]", li,
+ mini2440_lcd_cfg[li].width,
+ mini2440_lcd_cfg[li].height);
+ else
+ pr_cont(" %d:%dx%d", li,
+ mini2440_lcd_cfg[li].width,
+ mini2440_lcd_cfg[li].height);
+ pr_cont("\n");
+ s3c24xx_fb_set_platdata(&mini2440_fb_info);
+ }
+
+ s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+ gpiod_add_lookup_table(&mini2440_mmc_gpio_table);
+ s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
+ s3c_nand_set_platdata(&mini2440_nand_info);
+ s3c_i2c0_set_platdata(NULL);
+
+ i2c_register_board_info(0, mini2440_i2c_devs,
+ ARRAY_SIZE(mini2440_i2c_devs));
+
+ /* Disable pull-up on the LED lines */
+ s3c_gpio_setpull(S3C2410_GPB(5), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPB(6), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPB(7), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPB(8), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPG(4), S3C_GPIO_PULL_NONE);
+
+ /* Add lookups for the lines */
+ gpiod_add_lookup_table(&mini2440_led1_gpio_table);
+ gpiod_add_lookup_table(&mini2440_led2_gpio_table);
+ gpiod_add_lookup_table(&mini2440_led3_gpio_table);
+ gpiod_add_lookup_table(&mini2440_led4_gpio_table);
+ gpiod_add_lookup_table(&mini2440_backlight_gpio_table);
+
+ platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
+
+ if (features.count) /* the optional features */
+ platform_add_devices(features.optional, features.count);
+
+}
+
+
+MACHINE_START(MINI2440, "MINI2440")
+ /* Maintainer: Michel Pollet <buserror@gmail.com> */
+ .atag_offset = 0x100,
+ .map_io = mini2440_map_io,
+ .init_machine = mini2440_init,
+ .init_irq = s3c2440_init_irq,
+ .init_time = mini2440_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/dm9000.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/types.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <linux/soc/samsung/s3c-adc.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/mmc-sdhci-s3c.h>
+#include <plat/sdhci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <mach/irqs.h>
+
+#include <video/platform_lcd.h>
+#include <video/samsung_fimd.h>
+
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-srom-s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource mini6410_dm9k_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
+ [1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
+ [2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
+ | IORESOURCE_IRQ_HIGHLEVEL),
+};
+
+static struct dm9000_plat_data mini6410_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device mini6410_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mini6410_dm9k_resource),
+ .resource = mini6410_dm9k_resource,
+ .dev = {
+ .platform_data = &mini6410_dm9k_pdata,
+ },
+};
+
+static struct mtd_partition mini6410_nand_part[] = {
+ [0] = {
+ .name = "uboot",
+ .size = SZ_1M,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "kernel",
+ .size = SZ_2M,
+ .offset = SZ_1M,
+ },
+ [2] = {
+ .name = "rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = SZ_1M + SZ_2M,
+ },
+};
+
+static struct s3c2410_nand_set mini6410_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(mini6410_nand_part),
+ .partitions = mini6410_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand mini6410_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(mini6410_nand_sets),
+ .sets = mini6410_nand_sets,
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
+ .max_bpp = 32,
+ .default_bpp = 16,
+ .xres = 480,
+ .yres = 272,
+};
+
+static struct fb_videomode mini6410_lcd_type0_timing = {
+ /* 4.3" 480x272 */
+ .left_margin = 3,
+ .right_margin = 2,
+ .upper_margin = 1,
+ .lower_margin = 1,
+ .hsync_len = 40,
+ .vsync_len = 1,
+ .xres = 480,
+ .yres = 272,
+};
+
+static struct s3c_fb_pd_win mini6410_lcd_type1_fb_win = {
+ .max_bpp = 32,
+ .default_bpp = 16,
+ .xres = 800,
+ .yres = 480,
+};
+
+static struct fb_videomode mini6410_lcd_type1_timing = {
+ /* 7.0" 800x480 */
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+};
+
+static struct s3c_fb_platdata mini6410_lcd_pdata[] __initdata = {
+ {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .vtiming = &mini6410_lcd_type0_timing,
+ .win[0] = &mini6410_lcd_type0_fb_win,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ }, {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .vtiming = &mini6410_lcd_type1_timing,
+ .win[0] = &mini6410_lcd_type1_fb_win,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ },
+ { },
+};
+
+static void mini6410_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power)
+ gpio_direction_output(S3C64XX_GPE(0), 1);
+ else
+ gpio_direction_output(S3C64XX_GPE(0), 0);
+}
+
+static struct plat_lcd_data mini6410_lcd_power_data = {
+ .set_power = mini6410_lcd_power_set,
+};
+
+static struct platform_device mini6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &mini6410_lcd_power_data,
+};
+
+static struct s3c_sdhci_platdata mini6410_hsmmc1_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S3C64XX_GPN(10),
+ .ext_cd_gpio_invert = true,
+};
+
+static struct platform_device *mini6410_devices[] __initdata = {
+ &mini6410_device_eth,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_ohci,
+ &s3c_device_nand,
+ &s3c_device_fb,
+ &mini6410_lcd_powerdev,
+ &s3c_device_adc,
+};
+
+static void __init mini6410_map_io(void)
+{
+ u32 tmp;
+
+ s3c64xx_init_io(NULL, 0);
+ s3c64xx_set_xtal_freq(12000000);
+ s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+
+ /* set the LCD type */
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the LCD bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/*
+ * mini6410_features string
+ *
+ * 0-9 LCD configuration
+ *
+ */
+static char mini6410_features_str[12] __initdata = "0";
+
+static int __init mini6410_features_setup(char *str)
+{
+ if (str)
+ strlcpy(mini6410_features_str, str,
+ sizeof(mini6410_features_str));
+ return 1;
+}
+
+__setup("mini6410=", mini6410_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+
+struct mini6410_features_t {
+ int done;
+ int lcd_index;
+};
+
+static void mini6410_parse_features(
+ struct mini6410_features_t *features,
+ const char *features_str)
+{
+ const char *fp = features_str;
+
+ features->done = 0;
+ features->lcd_index = 0;
+
+ while (*fp) {
+ char f = *fp++;
+
+ switch (f) {
+ case '0'...'9': /* tft screen */
+ if (features->done & FEATURE_SCREEN) {
+ printk(KERN_INFO "MINI6410: '%c' ignored, "
+ "screen type already set\n", f);
+ } else {
+ int li = f - '0';
+ if (li >= ARRAY_SIZE(mini6410_lcd_pdata))
+ printk(KERN_INFO "MINI6410: '%c' out "
+ "of range LCD mode\n", f);
+ else {
+ features->lcd_index = li;
+ }
+ }
+ features->done |= FEATURE_SCREEN;
+ break;
+ }
+ }
+}
+
+static void __init mini6410_machine_init(void)
+{
+ u32 cs1;
+ struct mini6410_features_t features = { 0 };
+
+ printk(KERN_INFO "MINI6410: Option string mini6410=%s\n",
+ mini6410_features_str);
+
+ /* Parse the feature string */
+ mini6410_parse_features(&features, mini6410_features_str);
+
+ printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n",
+ mini6410_lcd_pdata[features.lcd_index].win[0]->xres,
+ mini6410_lcd_pdata[features.lcd_index].win[0]->yres);
+
+ s3c_nand_set_platdata(&mini6410_nand_info);
+ s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
+ s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
+ s3c64xx_ts_set_platdata(NULL);
+
+ /* configure nCS1 width to 16 bits */
+
+ cs1 = __raw_readl(S3C64XX_SROM_BW) &
+ ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S3C64XX_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S3C64XX_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+
+ __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+ (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+ (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+ (13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+ (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+ gpio_request(S3C64XX_GPF(15), "LCD power");
+ gpio_request(S3C64XX_GPE(0), "LCD power");
+
+ platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
+}
+
+MACHINE_START(MINI6410, "MINI6410")
+ /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
+ .atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
+ .init_irq = s3c6410_init_irq,
+ .map_io = mini6410_map_io,
+ .init_machine = mini6410_machine_init,
+ .init_time = samsung_timer_init,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Machine specific code for the Acer n30, Acer N35, Navman PiN 570,
+// Yakumo AlphaX and Airis NC05 PDAs.
+//
+// Copyright (c) 2003-2005 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se>
+//
+// There is a wiki with more information about the n30 port at
+// https://handhelds.org/moin/moin.cgi/AcerN30Documentation .
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <linux/gpio_keys.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+
+#include <mach/hardware-s3c24xx.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <plat/gpio-cfg.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include "s3c24xx.h"
+
+static struct map_desc n30_iodesc[] __initdata = {
+ /* nothing here yet */
+};
+
+static struct s3c2410_uartcfg n30_uartcfgs[] = {
+ /* Normal serial port */
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x2c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ /* IR port */
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .uart_flags = UPF_CONS_FLOW,
+ .ucon = 0x2c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ },
+ /* On the N30 the bluetooth controller is connected here.
+ * On the N35 and variants the GPS receiver is connected here. */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x2c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+};
+
+static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
+ .vbus_pin = S3C2410_GPG(1),
+ .vbus_pin_inverted = 0,
+ .pullup_pin = S3C2410_GPB(3),
+};
+
+static struct gpio_keys_button n30_buttons[] = {
+ {
+ .gpio = S3C2410_GPF(0),
+ .code = KEY_POWER,
+ .desc = "Power",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG(9),
+ .code = KEY_UP,
+ .desc = "Thumbwheel Up",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG(8),
+ .code = KEY_DOWN,
+ .desc = "Thumbwheel Down",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG(7),
+ .code = KEY_ENTER,
+ .desc = "Thumbwheel Press",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF(7),
+ .code = KEY_HOMEPAGE,
+ .desc = "Home",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF(6),
+ .code = KEY_CALENDAR,
+ .desc = "Calendar",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF(5),
+ .code = KEY_ADDRESSBOOK,
+ .desc = "Contacts",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF(4),
+ .code = KEY_MAIL,
+ .desc = "Mail",
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_platform_data n30_button_data = {
+ .buttons = n30_buttons,
+ .nbuttons = ARRAY_SIZE(n30_buttons),
+};
+
+static struct platform_device n30_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &n30_button_data,
+ }
+};
+
+static struct gpio_keys_button n35_buttons[] = {
+ {
+ .gpio = S3C2410_GPF(0),
+ .code = KEY_POWER,
+ .type = EV_PWR,
+ .desc = "Power",
+ .active_low = 0,
+ .wakeup = 1,
+ },
+ {
+ .gpio = S3C2410_GPG(9),
+ .code = KEY_UP,
+ .desc = "Joystick Up",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG(8),
+ .code = KEY_DOWN,
+ .desc = "Joystick Down",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG(6),
+ .code = KEY_DOWN,
+ .desc = "Joystick Left",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG(5),
+ .code = KEY_DOWN,
+ .desc = "Joystick Right",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG(7),
+ .code = KEY_ENTER,
+ .desc = "Joystick Press",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF(7),
+ .code = KEY_HOMEPAGE,
+ .desc = "Home",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF(6),
+ .code = KEY_CALENDAR,
+ .desc = "Calendar",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF(5),
+ .code = KEY_ADDRESSBOOK,
+ .desc = "Contacts",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF(4),
+ .code = KEY_MAIL,
+ .desc = "Mail",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPF(3),
+ .code = SW_RADIO,
+ .desc = "GPS Antenna",
+ .active_low = 0,
+ },
+ {
+ .gpio = S3C2410_GPG(2),
+ .code = SW_HEADPHONE_INSERT,
+ .desc = "Headphone",
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_platform_data n35_button_data = {
+ .buttons = n35_buttons,
+ .nbuttons = ARRAY_SIZE(n35_buttons),
+};
+
+static struct platform_device n35_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &n35_button_data,
+ }
+};
+
+/* This is the bluetooth LED on the device. */
+
+static struct gpiod_lookup_table n30_blue_led_gpio_table = {
+ .dev_id = "s3c24xx_led.1",
+ .table = {
+ GPIO_LOOKUP("GPG", 6, NULL, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct s3c24xx_led_platdata n30_blue_led_pdata = {
+ .name = "blue_led",
+ .def_trigger = "",
+};
+
+/* This is the blue LED on the device. Originally used to indicate GPS activity
+ * by flashing. */
+
+static struct gpiod_lookup_table n35_blue_led_gpio_table = {
+ .dev_id = "s3c24xx_led.1",
+ .table = {
+ GPIO_LOOKUP("GPD", 8, NULL, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct s3c24xx_led_platdata n35_blue_led_pdata = {
+ .name = "blue_led",
+ .def_trigger = "",
+};
+
+/* This LED is driven by the battery microcontroller, and is blinking
+ * red, blinking green or solid green when the battery is low,
+ * charging or full respectively. By driving GPD9 low, it's possible
+ * to force the LED to blink red, so call that warning LED. */
+
+static struct gpiod_lookup_table n30_warning_led_gpio_table = {
+ .dev_id = "s3c24xx_led.2",
+ .table = {
+ GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct s3c24xx_led_platdata n30_warning_led_pdata = {
+ .name = "warning_led",
+ .def_trigger = "",
+};
+
+static struct gpiod_lookup_table n35_warning_led_gpio_table = {
+ .dev_id = "s3c24xx_led.2",
+ .table = {
+ GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+ { },
+ },
+};
+
+static struct s3c24xx_led_platdata n35_warning_led_pdata = {
+ .name = "warning_led",
+ .def_trigger = "",
+};
+
+static struct platform_device n30_blue_led = {
+ .name = "s3c24xx_led",
+ .id = 1,
+ .dev = {
+ .platform_data = &n30_blue_led_pdata,
+ },
+};
+
+static struct platform_device n35_blue_led = {
+ .name = "s3c24xx_led",
+ .id = 1,
+ .dev = {
+ .platform_data = &n35_blue_led_pdata,
+ },
+};
+
+static struct platform_device n30_warning_led = {
+ .name = "s3c24xx_led",
+ .id = 2,
+ .dev = {
+ .platform_data = &n30_warning_led_pdata,
+ },
+};
+
+static struct platform_device n35_warning_led = {
+ .name = "s3c24xx_led",
+ .id = 2,
+ .dev = {
+ .platform_data = &n35_warning_led_pdata,
+ },
+};
+
+static struct s3c2410fb_display n30_display __initdata = {
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+ .pixclock = 170000,
+
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 3,
+ .right_margin = 40,
+ .hsync_len = 40,
+ .upper_margin = 2,
+ .lower_margin = 3,
+ .vsync_len = 2,
+
+ .lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME,
+};
+
+static struct s3c2410fb_mach_info n30_fb_info __initdata = {
+ .displays = &n30_display,
+ .num_displays = 1,
+ .default_display = 0,
+ .lpcsel = 0x06,
+};
+
+static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
+{
+ s3c24xx_mci_def_set_power(power_mode, vdd);
+
+ switch (power_mode) {
+ case MMC_POWER_ON:
+ case MMC_POWER_UP:
+ gpio_set_value(S3C2410_GPG(4), 1);
+ break;
+ case MMC_POWER_OFF:
+ default:
+ gpio_set_value(S3C2410_GPG(4), 0);
+ break;
+ }
+}
+
+static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = {
+ .ocr_avail = MMC_VDD_32_33,
+ .set_power = n30_sdi_set_power,
+};
+
+static struct gpiod_lookup_table n30_mci_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* Card detect S3C2410_GPF(1) */
+ GPIO_LOOKUP("GPIOF", 1, "cd", GPIO_ACTIVE_LOW),
+ /* Write protect S3C2410_GPG(10) */
+ GPIO_LOOKUP("GPIOG", 10, "wp", GPIO_ACTIVE_LOW),
+ { },
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ },
+};
+
+static struct platform_device *n30_devices[] __initdata = {
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_ohci,
+ &s3c_device_rtc,
+ &s3c_device_usbgadget,
+ &s3c_device_sdi,
+ &n30_button_device,
+ &n30_blue_led,
+ &n30_warning_led,
+};
+
+static struct platform_device *n35_devices[] __initdata = {
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_rtc,
+ &s3c_device_usbgadget,
+ &s3c_device_sdi,
+ &n35_button_device,
+ &n35_blue_led,
+ &n35_warning_led,
+};
+
+static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
+ .flags = 0,
+ .slave_addr = 0x10,
+ .frequency = 10*1000,
+};
+
+/* Lots of hardcoded stuff, but it sets up the hardware in a useful
+ * state so that we can boot Linux directly from flash. */
+static void __init n30_hwinit(void)
+{
+ /* GPA0-11 special functions -- unknown what they do
+ * GPA12 N30 special function -- unknown what it does
+ * N35/PiN output -- unknown what it does
+ *
+ * A12 is nGCS1 on the N30 and an output on the N35/PiN. I
+ * don't think it does anything useful on the N30, so I ought
+ * to make it an output there too since it always driven to 0
+ * as far as I can tell. */
+ if (machine_is_n30())
+ __raw_writel(0x007fffff, S3C2410_GPACON);
+ if (machine_is_n35())
+ __raw_writel(0x007fefff, S3C2410_GPACON);
+ __raw_writel(0x00000000, S3C2410_GPADAT);
+
+ /* GPB0 TOUT0 backlight level
+ * GPB1 output 1=backlight on
+ * GPB2 output IrDA enable 0=transceiver enabled, 1=disabled
+ * GPB3 output USB D+ pull up 0=disabled, 1=enabled
+ * GPB4 N30 output -- unknown function
+ * N30/PiN GPS control 0=GPS enabled, 1=GPS disabled
+ * GPB5 output -- unknown function
+ * GPB6 input -- unknown function
+ * GPB7 output -- unknown function
+ * GPB8 output -- probably LCD driver enable
+ * GPB9 output -- probably LCD VSYNC driver enable
+ * GPB10 output -- probably LCD HSYNC driver enable
+ */
+ __raw_writel(0x00154556, S3C2410_GPBCON);
+ __raw_writel(0x00000750, S3C2410_GPBDAT);
+ __raw_writel(0x00000073, S3C2410_GPBUP);
+
+ /* GPC0 input RS232 DCD/DSR/RI
+ * GPC1 LCD
+ * GPC2 output RS232 DTR?
+ * GPC3 input RS232 DCD/DSR/RI
+ * GPC4 LCD
+ * GPC5 output 0=NAND write enabled, 1=NAND write protect
+ * GPC6 input -- unknown function
+ * GPC7 input charger status 0=charger connected
+ * this input can be triggered by power on the USB device
+ * port too, but will go back to disconnected soon after.
+ * GPC8 N30/N35 output -- unknown function, always driven to 1
+ * PiN input -- unknown function, always read as 1
+ * Make it an input with a pull up for all models.
+ * GPC9-15 LCD
+ */
+ __raw_writel(0xaaa80618, S3C2410_GPCCON);
+ __raw_writel(0x0000014c, S3C2410_GPCDAT);
+ __raw_writel(0x0000fef2, S3C2410_GPCUP);
+
+ /* GPD0 input -- unknown function
+ * GPD1-D7 LCD
+ * GPD8 N30 output -- unknown function
+ * N35/PiN output 1=GPS LED on
+ * GPD9 output 0=power led blinks red, 1=normal power led function
+ * GPD10 output -- unknown function
+ * GPD11-15 LCD drivers
+ */
+ __raw_writel(0xaa95aaa4, S3C2410_GPDCON);
+ __raw_writel(0x00000601, S3C2410_GPDDAT);
+ __raw_writel(0x0000fbfe, S3C2410_GPDUP);
+
+ /* GPE0-4 I2S audio bus
+ * GPE5-10 SD/MMC bus
+ * E11-13 outputs -- unknown function, probably power management
+ * E14-15 I2C bus connected to the battery controller
+ */
+ __raw_writel(0xa56aaaaa, S3C2410_GPECON);
+ __raw_writel(0x0000efc5, S3C2410_GPEDAT);
+ __raw_writel(0x0000f81f, S3C2410_GPEUP);
+
+ /* GPF0 input 0=power button pressed
+ * GPF1 input SD/MMC switch 0=card present
+ * GPF2 N30 1=reset button pressed (inverted compared to the rest)
+ * N35/PiN 0=reset button pressed
+ * GPF3 N30/PiN input -- unknown function
+ * N35 input GPS antenna position, 0=antenna closed, 1=open
+ * GPF4 input 0=button 4 pressed
+ * GPF5 input 0=button 3 pressed
+ * GPF6 input 0=button 2 pressed
+ * GPF7 input 0=button 1 pressed
+ */
+ __raw_writel(0x0000aaaa, S3C2410_GPFCON);
+ __raw_writel(0x00000000, S3C2410_GPFDAT);
+ __raw_writel(0x000000ff, S3C2410_GPFUP);
+
+ /* GPG0 input RS232 DCD/DSR/RI
+ * GPG1 input 1=USB gadget port has power from a host
+ * GPG2 N30 input -- unknown function
+ * N35/PiN input 0=headphones plugged in, 1=not plugged in
+ * GPG3 N30 output -- unknown function
+ * N35/PiN input with unknown function
+ * GPG4 N30 output 0=MMC enabled, 1=MMC disabled
+ * GPG5 N30 output 0=BlueTooth chip disabled, 1=enabled
+ * N35/PiN input joystick right
+ * GPG6 N30 output 0=blue led on, 1=off
+ * N35/PiN input joystick left
+ * GPG7 input 0=thumbwheel pressed
+ * GPG8 input 0=thumbwheel down
+ * GPG9 input 0=thumbwheel up
+ * GPG10 input SD/MMC write protect switch
+ * GPG11 N30 input -- unknown function
+ * N35 output 0=GPS antenna powered, 1=not powered
+ * PiN output -- unknown function
+ * GPG12-15 touch screen functions
+ *
+ * The pullups differ between the models, so enable all
+ * pullups that are enabled on any of the models.
+ */
+ if (machine_is_n30())
+ __raw_writel(0xff0a956a, S3C2410_GPGCON);
+ if (machine_is_n35())
+ __raw_writel(0xff4aa92a, S3C2410_GPGCON);
+ __raw_writel(0x0000e800, S3C2410_GPGDAT);
+ __raw_writel(0x0000f86f, S3C2410_GPGUP);
+
+ /* GPH0/1/2/3 RS232 serial port
+ * GPH4/5 IrDA serial port
+ * GPH6/7 N30 BlueTooth serial port
+ * N35/PiN GPS receiver
+ * GPH8 input -- unknown function
+ * GPH9 CLKOUT0 HCLK -- unknown use
+ * GPH10 CLKOUT1 FCLK -- unknown use
+ *
+ * The pull ups for H6/H7 are enabled on N30 but not on the
+ * N35/PiN. I suppose is useful for a budget model of the N30
+ * with no bluetooth. It doesn't hurt to have the pull ups
+ * enabled on the N35, so leave them enabled for all models.
+ */
+ __raw_writel(0x0028aaaa, S3C2410_GPHCON);
+ __raw_writel(0x000005ef, S3C2410_GPHDAT);
+ __raw_writel(0x0000063f, S3C2410_GPHUP);
+}
+
+static void __init n30_map_io(void)
+{
+ s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
+ n30_hwinit();
+ s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init n30_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+/* GPB3 is the line that controls the pull-up for the USB D+ line */
+
+static void __init n30_init(void)
+{
+ WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
+
+ s3c24xx_fb_set_platdata(&n30_fb_info);
+ s3c24xx_udc_set_platdata(&n30_udc_cfg);
+ gpiod_add_lookup_table(&n30_mci_gpio_table);
+ s3c24xx_mci_set_platdata(&n30_mci_cfg);
+ s3c_i2c0_set_platdata(&n30_i2ccfg);
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
+ if (machine_is_n30()) {
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ /* Disable pull-up and add GPIO tables */
+ s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+ gpiod_add_lookup_table(&n30_blue_led_gpio_table);
+ gpiod_add_lookup_table(&n30_warning_led_gpio_table);
+
+ platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
+ }
+
+ if (machine_is_n35()) {
+ /* Turn off suspend and switch the selectable USB port
+ * to USB device mode. Turn on suspend for the host
+ * port since it is not connected on the N35.
+ *
+ * Actually, the host port is available at some pads
+ * on the back of the device, so it would actually be
+ * possible to add a USB device inside the N35 if you
+ * are willing to do some hardware modifications. */
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1,
+ S3C2410_MISCCR_USBSUSPND0);
+
+ /* Disable pull-up and add GPIO tables */
+ s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+ gpiod_add_lookup_table(&n35_blue_led_gpio_table);
+ gpiod_add_lookup_table(&n35_warning_led_gpio_table);
+
+ platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
+ }
+}
+
+MACHINE_START(N30, "Acer-N30")
+ /* Maintainer: Christer Weinigel <christer@weinigel.se>,
+ Ben Dooks <ben-linux@fluff.org>
+ */
+ .atag_offset = 0x100,
+ .init_time = n30_init_time,
+ .init_machine = n30_init,
+ .init_irq = s3c2410_init_irq,
+ .map_io = n30_map_io,
+MACHINE_END
+
+MACHINE_START(N35, "Acer-N35")
+ /* Maintainer: Christer Weinigel <christer@weinigel.se>
+ */
+ .atag_offset = 0x100,
+ .init_time = n30_init_time,
+ .init_machine = n30_init,
+ .init_irq = s3c2410_init_irq,
+ .map_io = n30_map_io,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2008-2009 Samsung Electronics
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+#include <video/samsung_fimd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/fb.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
+ /* REVISIT: NCP uses only serial 1, 2 */
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static struct platform_device *ncp_devices[] __initdata = {
+ &s3c_device_hsmmc1,
+ &s3c_device_i2c0,
+};
+
+static struct map_desc ncp_iodesc[] __initdata = {};
+
+static void __init ncp_map_io(void)
+{
+ s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
+ s3c64xx_set_xtal_freq(12000000);
+ s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init ncp_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+
+ platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
+}
+
+MACHINE_START(NCP, "NCP")
+ /* Maintainer: Samsung Electronics */
+ .atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
+ .init_irq = s3c6410_init_irq,
+ .map_io = ncp_map_io,
+ .init_machine = ncp_machine_init,
+ .init_time = samsung_timer_init,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+// linux/arch/arm/mach-s3c2440/mach-nexcoder.c
+//
+// Copyright (c) 2004 Nex Vision
+// Guillaume GOURAT <guillaume.gourat@nexvision.tv>
+//
+// Modifications:
+// 15-10-2004 GG Created initial version
+// 12-03-2005 BJD Updated for release
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mtd/map.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+//#include <asm/debug-ll.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "s3c24xx.h"
+
+static struct map_desc nexcoder_iodesc[] __initdata = {
+ /* nothing here yet */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* NOR Flash on NexVision NexCoder 2440 board */
+
+static struct resource nexcoder_nor_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_8M),
+};
+
+static struct map_info nexcoder_nor_map = {
+ .bankwidth = 2,
+};
+
+static struct platform_device nexcoder_device_nor = {
+ .name = "mtd-flash",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nexcoder_nor_resource),
+ .resource = nexcoder_nor_resource,
+ .dev =
+ {
+ .platform_data = &nexcoder_nor_map,
+ }
+};
+
+/* Standard Nexcoder devices */
+
+static struct platform_device *nexcoder_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_rtc,
+ &s3c_device_camif,
+ &s3c_device_spi0,
+ &s3c_device_spi1,
+ &nexcoder_device_nor,
+};
+
+static void __init nexcoder_sensorboard_init(void)
+{
+ /* Initialize SCCB bus */
+ gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPE(14)); /* IICSCL */
+ gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPE(15)); /* IICSDA */
+
+ /* Power up the sensor board */
+ gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPF(1)); /* CAM_GPIO7 => nLDO_PWRDN */
+ gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
+ gpio_free(S3C2410_GPF(2)); /* CAM_GPIO6 => CAM_PWRDN */
+}
+
+static void __init nexcoder_map_io(void)
+{
+ s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
+ s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+
+ nexcoder_sensorboard_init();
+}
+
+static void __init nexcoder_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void __init nexcoder_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
+ platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
+};
+
+MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
+ /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
+ .atag_offset = 0x100,
+ .map_io = nexcoder_map_io,
+ .init_machine = nexcoder_init,
+ .init_irq = s3c2440_init_irq,
+ .init_time = nexcoder_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2009 Simtec Electronics
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>
+//
+// Simtec Osiris Dynamic Voltage Scaling support.
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/gpio.h>
+
+#include <linux/mfd/tps65010.h>
+
+#include <linux/soc/samsung/s3c-cpu-freq.h>
+#include <mach/gpio-samsung.h>
+
+#define OSIRIS_GPIO_DVS S3C2410_GPB(5)
+
+static bool dvs_en;
+
+static void osiris_dvs_tps_setdvs(bool on)
+{
+ unsigned vregs1 = 0, vdcdc2 = 0;
+
+ if (!on) {
+ vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
+ vregs1 = TPS_LDO1_OFF; /* turn off in low-power mode */
+ }
+
+ dvs_en = on;
+ vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
+ vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
+
+ tps65010_config_vregs1(vregs1);
+ tps65010_config_vdcdc2(vdcdc2);
+}
+
+static bool is_dvs(struct s3c_freq *f)
+{
+ /* at the moment, we assume ARMCLK = HCLK => DVS */
+ return f->armclk == f->hclk;
+}
+
+/* keep track of current state */
+static bool cur_dvs = false;
+
+static int osiris_dvs_notify(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct cpufreq_freqs *cf = data;
+ struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
+ bool old_dvs = is_dvs(&freqs->old);
+ bool new_dvs = is_dvs(&freqs->new);
+ int ret = 0;
+
+ if (!dvs_en)
+ return 0;
+
+ printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
+ freqs->old.armclk, freqs->old.hclk,
+ freqs->new.armclk, freqs->new.hclk);
+
+ switch (val) {
+ case CPUFREQ_PRECHANGE:
+ if ((old_dvs && !new_dvs) ||
+ (cur_dvs && !new_dvs)) {
+ pr_debug("%s: exiting dvs\n", __func__);
+ cur_dvs = false;
+ gpio_set_value(OSIRIS_GPIO_DVS, 1);
+ }
+ break;
+ case CPUFREQ_POSTCHANGE:
+ if ((!old_dvs && new_dvs) ||
+ (!cur_dvs && new_dvs)) {
+ pr_debug("entering dvs\n");
+ cur_dvs = true;
+ gpio_set_value(OSIRIS_GPIO_DVS, 0);
+ }
+ break;
+ }
+
+ return ret;
+}
+
+static struct notifier_block osiris_dvs_nb = {
+ .notifier_call = osiris_dvs_notify,
+};
+
+static int osiris_dvs_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ dev_info(&pdev->dev, "initialising\n");
+
+ ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
+ if (ret) {
+ dev_err(&pdev->dev, "cannot claim gpio\n");
+ goto err_nogpio;
+ }
+
+ /* start with dvs disabled */
+ gpio_direction_output(OSIRIS_GPIO_DVS, 1);
+
+ ret = cpufreq_register_notifier(&osiris_dvs_nb,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register with cpufreq\n");
+ goto err_nofreq;
+ }
+
+ osiris_dvs_tps_setdvs(true);
+
+ return 0;
+
+err_nofreq:
+ gpio_free(OSIRIS_GPIO_DVS);
+
+err_nogpio:
+ return ret;
+}
+
+static int osiris_dvs_remove(struct platform_device *pdev)
+{
+ dev_info(&pdev->dev, "exiting\n");
+
+ /* disable any current dvs */
+ gpio_set_value(OSIRIS_GPIO_DVS, 1);
+ osiris_dvs_tps_setdvs(false);
+
+ cpufreq_unregister_notifier(&osiris_dvs_nb,
+ CPUFREQ_TRANSITION_NOTIFIER);
+
+ gpio_free(OSIRIS_GPIO_DVS);
+
+ return 0;
+}
+
+/* the CONFIG_PM block is so small, it isn't worth actually compiling it
+ * out if the configuration isn't set. */
+
+static int osiris_dvs_suspend(struct device *dev)
+{
+ gpio_set_value(OSIRIS_GPIO_DVS, 1);
+ osiris_dvs_tps_setdvs(false);
+ cur_dvs = false;
+
+ return 0;
+}
+
+static int osiris_dvs_resume(struct device *dev)
+{
+ osiris_dvs_tps_setdvs(true);
+ return 0;
+}
+
+static const struct dev_pm_ops osiris_dvs_pm = {
+ .suspend = osiris_dvs_suspend,
+ .resume = osiris_dvs_resume,
+};
+
+static struct platform_driver osiris_dvs_driver = {
+ .probe = osiris_dvs_probe,
+ .remove = osiris_dvs_remove,
+ .driver = {
+ .name = "osiris-dvs",
+ .pm = &osiris_dvs_pm,
+ },
+};
+
+module_platform_driver(osiris_dvs_driver);
+
+MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:osiris-dvs");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2005-2008 Simtec Electronics
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/tps65010.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/cpu.h>
+#include <linux/soc/samsung/s3c-cpu-freq.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include "s3c24xx.h"
+#include "osiris.h"
+#include "regs-mem-s3c24xx.h"
+
+/* onboard perihperal map */
+
+static struct map_desc osiris_iodesc[] __initdata = {
+ /* ISA IO areas (may be over-written later) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS5),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS5),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ },
+
+ /* CPLD control registers */
+
+ {
+ .virtual = (u32)OSIRIS_VA_CTRL0,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)OSIRIS_VA_CTRL1,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)OSIRIS_VA_CTRL2,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)OSIRIS_VA_IDREG,
+ .pfn = __phys_to_pfn(OSIRIS_PA_IDREG),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ }
+};
+
+/* NAND Flash on Osiris board */
+
+static int external_map[] = { 2 };
+static int chip0_map[] = { 0 };
+static int chip1_map[] = { 1 };
+
+static struct mtd_partition __initdata osiris_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_16K,
+ .offset = SZ_16K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_128K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_128K,
+ .offset = SZ_128K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/* the Osiris has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
+ [1] = {
+ .name = "External",
+ .nr_chips = 1,
+ .nr_map = external_map,
+ .options = NAND_SCAN_SILENT_NODEV,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+ [0] = {
+ .name = "chip0",
+ .nr_chips = 1,
+ .nr_map = chip0_map,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+ [2] = {
+ .name = "chip1",
+ .nr_chips = 1,
+ .nr_map = chip1_map,
+ .options = NAND_SCAN_SILENT_NODEV,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+};
+
+static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+ unsigned int tmp;
+
+ slot = set->nr_map[slot] & 3;
+
+ pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
+ slot, set, set->nr_map);
+
+ tmp = __raw_readb(OSIRIS_VA_CTRL0);
+ tmp &= ~OSIRIS_CTRL0_NANDSEL;
+ tmp |= slot;
+
+ pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
+
+ __raw_writeb(tmp, OSIRIS_VA_CTRL0);
+}
+
+static struct s3c2410_platform_nand __initdata osiris_nand_info = {
+ .tacls = 25,
+ .twrph0 = 60,
+ .twrph1 = 60,
+ .nr_sets = ARRAY_SIZE(osiris_nand_sets),
+ .sets = osiris_nand_sets,
+ .select_chip = osiris_nand_select,
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+/* PCMCIA control and configuration */
+
+static struct resource osiris_pcmcia_resource[] = {
+ [0] = DEFINE_RES_MEM(0x0f000000, SZ_1M),
+ [1] = DEFINE_RES_MEM(0x0c000000, SZ_1M),
+};
+
+static struct platform_device osiris_pcmcia = {
+ .name = "osiris-pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(osiris_pcmcia_resource),
+ .resource = osiris_pcmcia_resource,
+};
+
+/* Osiris power management device */
+
+#ifdef CONFIG_PM
+static unsigned char pm_osiris_ctrl0;
+
+static int osiris_pm_suspend(void)
+{
+ unsigned int tmp;
+
+ pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
+ tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
+
+ /* ensure correct NAND slot is selected on resume */
+ if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
+ tmp |= 2;
+
+ __raw_writeb(tmp, OSIRIS_VA_CTRL0);
+
+ /* ensure that an nRESET is not generated on resume. */
+ gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPA(21));
+
+ return 0;
+}
+
+static void osiris_pm_resume(void)
+{
+ if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
+ __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
+
+ __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
+
+ s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
+}
+
+#else
+#define osiris_pm_suspend NULL
+#define osiris_pm_resume NULL
+#endif
+
+static struct syscore_ops osiris_pm_syscore_ops = {
+ .suspend = osiris_pm_suspend,
+ .resume = osiris_pm_resume,
+};
+
+/* Link for DVS driver to TPS65011 */
+
+static void osiris_tps_release(struct device *dev)
+{
+ /* static device, do not need to release anything */
+}
+
+static struct platform_device osiris_tps_device = {
+ .name = "osiris-dvs",
+ .id = -1,
+ .dev.release = osiris_tps_release,
+};
+
+static int osiris_tps_setup(struct i2c_client *client, void *context)
+{
+ osiris_tps_device.dev.parent = &client->dev;
+ return platform_device_register(&osiris_tps_device);
+}
+
+static int osiris_tps_remove(struct i2c_client *client, void *context)
+{
+ platform_device_unregister(&osiris_tps_device);
+ return 0;
+}
+
+static struct tps65010_board osiris_tps_board = {
+ .base = -1, /* GPIO can go anywhere at the moment */
+ .setup = osiris_tps_setup,
+ .teardown = osiris_tps_remove,
+};
+
+/* I2C devices fitted. */
+
+static struct i2c_board_info osiris_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tps65011", 0x48),
+ .irq = IRQ_EINT20,
+ .platform_data = &osiris_tps_board,
+ },
+};
+
+/* Standard Osiris devices */
+
+static struct platform_device *osiris_devices[] __initdata = {
+ &s3c2410_device_dclk,
+ &s3c_device_i2c0,
+ &s3c_device_wdt,
+ &s3c_device_nand,
+ &osiris_pcmcia,
+};
+
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+ .refresh = 7800, /* refresh period is 7.8usec */
+ .auto_io = 1,
+ .need_io = 1,
+};
+
+static void __init osiris_map_io(void)
+{
+ unsigned long flags;
+
+ s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
+ s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+
+ /* check for the newer revision boards with large page nand */
+
+ if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
+ printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
+ __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
+ osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
+ osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
+ } else {
+ /* write-protect line to the NAND */
+ gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPA(0));
+ }
+
+ /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
+
+ local_irq_save(flags);
+ __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
+ local_irq_restore(flags);
+}
+
+static void __init osiris_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void __init osiris_init(void)
+{
+ register_syscore_ops(&osiris_pm_syscore_ops);
+
+ s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&osiris_nand_info);
+
+ s3c_cpufreq_setboard(&osiris_cpufreq);
+
+ i2c_register_board_info(0, osiris_i2c_devs,
+ ARRAY_SIZE(osiris_i2c_devs));
+
+ platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
+};
+
+MACHINE_START(OSIRIS, "Simtec-OSIRIS")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .atag_offset = 0x100,
+ .map_io = osiris_map_io,
+ .init_irq = s3c2440_init_irq,
+ .init_machine = osiris_init,
+ .init_time = osiris_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2004 Nex Vision
+// Guillaume GOURAT <guillaume.gourat@nexvision.fr>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <plat/gpio-cfg.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+
+#include "s3c24xx.h"
+#include "otom.h"
+
+static struct map_desc otom11_iodesc[] __initdata = {
+ /* Device area */
+ { (u32)OTOM_VA_CS8900A_BASE, OTOM_PA_CS8900A_BASE, SZ_16M, MT_DEVICE },
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg otom11_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ /* port 2 is not actually used */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* NOR Flash on NexVision OTOM board */
+
+static struct resource otom_nor_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_4M),
+};
+
+static struct platform_device otom_device_nor = {
+ .name = "mtd-flash",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(otom_nor_resource),
+ .resource = otom_nor_resource,
+};
+
+/* Standard OTOM devices */
+
+static struct platform_device *otom11_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_rtc,
+ &otom_device_nor,
+};
+
+static void __init otom11_map_io(void)
+{
+ s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
+ s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init otom11_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void __init otom11_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+ platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
+}
+
+MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
+ /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
+ .atag_offset = 0x100,
+ .map_io = otom11_map_io,
+ .init_machine = otom11_init,
+ .init_irq = s3c2410_init_irq,
+ .init_time = otom11_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2006 by OpenMoko, Inc.
+// Author: Harald Welte <laforge@openmoko.org>
+// All rights reserved.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/fb-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
+
+static struct map_desc qt2410_iodesc[] __initdata = {
+ { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* LCD driver info */
+
+static struct s3c2410fb_display qt2410_lcd_cfg[] __initdata = {
+ {
+ /* Configuration for 640x480 SHARP LQ080V3DG01 */
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 640,
+ .height = 480,
+
+ .pixclock = 40000, /* HCLK/4 */
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .left_margin = 44,
+ .right_margin = 116,
+ .hsync_len = 96,
+ .upper_margin = 19,
+ .lower_margin = 11,
+ .vsync_len = 15,
+ },
+ {
+ /* Configuration for 480x640 toppoly TD028TTEC1 */
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 480,
+ .height = 640,
+ .pixclock = 40000, /* HCLK/4 */
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .left_margin = 8,
+ .right_margin = 24,
+ .hsync_len = 8,
+ .upper_margin = 2,
+ .lower_margin = 4,
+ .vsync_len = 2,
+ },
+ {
+ /* Config for 240x320 LCD */
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+ .pixclock = 100000, /* HCLK/10 */
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 13,
+ .right_margin = 8,
+ .hsync_len = 4,
+ .upper_margin = 2,
+ .lower_margin = 7,
+ .vsync_len = 4,
+ },
+};
+
+
+static struct s3c2410fb_mach_info qt2410_fb_info __initdata = {
+ .displays = qt2410_lcd_cfg,
+ .num_displays = ARRAY_SIZE(qt2410_lcd_cfg),
+ .default_display = 0,
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+};
+
+/* CS8900 */
+
+static struct resource qt2410_cs89x0_resources[] = {
+ [0] = DEFINE_RES_MEM(0x19000000, 17),
+ [1] = DEFINE_RES_IRQ(IRQ_EINT9),
+};
+
+static struct platform_device qt2410_cs89x0 = {
+ .name = "cirrus-cs89x0",
+ .num_resources = ARRAY_SIZE(qt2410_cs89x0_resources),
+ .resource = qt2410_cs89x0_resources,
+};
+
+/* LED */
+
+static struct gpiod_lookup_table qt2410_led_gpio_table = {
+ .dev_id = "s3c24xx_led.0",
+ .table = {
+ GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+ { },
+ },
+};
+
+static struct s3c24xx_led_platdata qt2410_pdata_led = {
+ .name = "led",
+ .def_trigger = "timer",
+};
+
+static struct platform_device qt2410_led = {
+ .name = "s3c24xx_led",
+ .id = 0,
+ .dev = {
+ .platform_data = &qt2410_pdata_led,
+ },
+};
+
+/* SPI */
+
+static struct spi_gpio_platform_data spi_gpio_cfg = {
+ .num_chipselect = 1,
+};
+
+static struct platform_device qt2410_spi = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev.platform_data = &spi_gpio_cfg,
+};
+
+static struct gpiod_lookup_table qt2410_spi_gpiod_table = {
+ .dev_id = "spi_gpio",
+ .table = {
+ GPIO_LOOKUP("GPIOG", 7,
+ "sck", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOG", 6,
+ "mosi", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOG", 5,
+ "miso", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOB", 5,
+ "cs", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table qt2410_mmc_gpiod_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+/* Board devices */
+
+static struct platform_device *qt2410_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_sdi,
+ &s3c_device_usbgadget,
+ &qt2410_spi,
+ &qt2410_cs89x0,
+ &qt2410_led,
+};
+
+static struct mtd_partition __initdata qt2410_nand_part[] = {
+ [0] = {
+ .name = "U-Boot",
+ .size = 0x30000,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "U-Boot environment",
+ .offset = 0x30000,
+ .size = 0x4000,
+ },
+ [2] = {
+ .name = "kernel",
+ .offset = 0x34000,
+ .size = SZ_2M,
+ },
+ [3] = {
+ .name = "initrd",
+ .offset = 0x234000,
+ .size = SZ_4M,
+ },
+ [4] = {
+ .name = "jffs2",
+ .offset = 0x634000,
+ .size = 0x39cc000,
+ },
+};
+
+static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = {
+ [0] = {
+ .name = "NAND",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(qt2410_nand_part),
+ .partitions = qt2410_nand_part,
+ },
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+ */
+
+static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
+ .tacls = 20,
+ .twrph0 = 60,
+ .twrph1 = 20,
+ .nr_sets = ARRAY_SIZE(qt2410_nand_sets),
+ .sets = qt2410_nand_sets,
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+/* UDC */
+
+static struct s3c2410_udc_mach_info qt2410_udc_cfg = {
+};
+
+static char tft_type = 's';
+
+static int __init qt2410_tft_setup(char *str)
+{
+ tft_type = str[0];
+ return 1;
+}
+
+__setup("tft=", qt2410_tft_setup);
+
+static void __init qt2410_map_io(void)
+{
+ s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
+ s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init qt2410_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void __init qt2410_machine_init(void)
+{
+ s3c_nand_set_platdata(&qt2410_nand_info);
+
+ switch (tft_type) {
+ case 'p': /* production */
+ qt2410_fb_info.default_display = 1;
+ break;
+ case 'b': /* big */
+ qt2410_fb_info.default_display = 0;
+ break;
+ case 's': /* small */
+ default:
+ qt2410_fb_info.default_display = 2;
+ break;
+ }
+ s3c24xx_fb_set_platdata(&qt2410_fb_info);
+
+ /* set initial state of the LED GPIO */
+ WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL));
+ gpio_free(S3C2410_GPB(0));
+
+ s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
+ s3c_i2c0_set_platdata(NULL);
+
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+ gpiod_add_lookup_table(&qt2410_spi_gpiod_table);
+ s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+ gpiod_add_lookup_table(&qt2410_led_gpio_table);
+ gpiod_add_lookup_table(&qt2410_mmc_gpiod_table);
+ platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
+ s3c_pm_init();
+}
+
+MACHINE_START(QT2410, "QT2410")
+ .atag_offset = 0x100,
+ .map_io = qt2410_map_io,
+ .init_irq = s3c2410_init_irq,
+ .init_machine = qt2410_machine_init,
+ .init_time = qt2410_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/dm9000.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/types.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
+
+#include <linux/soc/samsung/s3c-adc.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
+#include <video/platform_lcd.h>
+#include <video/samsung_fimd.h>
+
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-srom-s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource real6410_dm9k_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
+ [1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
+ [2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
+ | IORESOURCE_IRQ_HIGHLEVEL),
+};
+
+static struct dm9000_plat_data real6410_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device real6410_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(real6410_dm9k_resource),
+ .resource = real6410_dm9k_resource,
+ .dev = {
+ .platform_data = &real6410_dm9k_pdata,
+ },
+};
+
+static struct s3c_fb_pd_win real6410_lcd_type0_fb_win = {
+ .max_bpp = 32,
+ .default_bpp = 16,
+ .xres = 480,
+ .yres = 272,
+};
+
+static struct fb_videomode real6410_lcd_type0_timing = {
+ /* 4.3" 480x272 */
+ .left_margin = 3,
+ .right_margin = 2,
+ .upper_margin = 1,
+ .lower_margin = 1,
+ .hsync_len = 40,
+ .vsync_len = 1,
+};
+
+static struct s3c_fb_pd_win real6410_lcd_type1_fb_win = {
+ .max_bpp = 32,
+ .default_bpp = 16,
+ .xres = 800,
+ .yres = 480,
+};
+
+static struct fb_videomode real6410_lcd_type1_timing = {
+ /* 7.0" 800x480 */
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+};
+
+static struct s3c_fb_platdata real6410_lcd_pdata[] __initdata = {
+ {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .vtiming = &real6410_lcd_type0_timing,
+ .win[0] = &real6410_lcd_type0_fb_win,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ }, {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .vtiming = &real6410_lcd_type1_timing,
+ .win[0] = &real6410_lcd_type1_fb_win,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ },
+ { },
+};
+
+static struct mtd_partition real6410_nand_part[] = {
+ [0] = {
+ .name = "uboot",
+ .size = SZ_1M,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "kernel",
+ .size = SZ_2M,
+ .offset = SZ_1M,
+ },
+ [2] = {
+ .name = "rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = SZ_1M + SZ_2M,
+ },
+};
+
+static struct s3c2410_nand_set real6410_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(real6410_nand_part),
+ .partitions = real6410_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand real6410_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(real6410_nand_sets),
+ .sets = real6410_nand_sets,
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+static struct platform_device *real6410_devices[] __initdata = {
+ &real6410_device_eth,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_fb,
+ &s3c_device_nand,
+ &s3c_device_adc,
+ &s3c_device_ohci,
+};
+
+static void __init real6410_map_io(void)
+{
+ u32 tmp;
+
+ s3c64xx_init_io(NULL, 0);
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+
+ /* set the LCD type */
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the LCD bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/*
+ * real6410_features string
+ *
+ * 0-9 LCD configuration
+ *
+ */
+static char real6410_features_str[12] __initdata = "0";
+
+static int __init real6410_features_setup(char *str)
+{
+ if (str)
+ strlcpy(real6410_features_str, str,
+ sizeof(real6410_features_str));
+ return 1;
+}
+
+__setup("real6410=", real6410_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+
+struct real6410_features_t {
+ int done;
+ int lcd_index;
+};
+
+static void real6410_parse_features(
+ struct real6410_features_t *features,
+ const char *features_str)
+{
+ const char *fp = features_str;
+
+ features->done = 0;
+ features->lcd_index = 0;
+
+ while (*fp) {
+ char f = *fp++;
+
+ switch (f) {
+ case '0'...'9': /* tft screen */
+ if (features->done & FEATURE_SCREEN) {
+ printk(KERN_INFO "REAL6410: '%c' ignored, "
+ "screen type already set\n", f);
+ } else {
+ int li = f - '0';
+ if (li >= ARRAY_SIZE(real6410_lcd_pdata))
+ printk(KERN_INFO "REAL6410: '%c' out "
+ "of range LCD mode\n", f);
+ else {
+ features->lcd_index = li;
+ }
+ }
+ features->done |= FEATURE_SCREEN;
+ break;
+ }
+ }
+}
+
+static void __init real6410_machine_init(void)
+{
+ u32 cs1;
+ struct real6410_features_t features = { 0 };
+
+ printk(KERN_INFO "REAL6410: Option string real6410=%s\n",
+ real6410_features_str);
+
+ /* Parse the feature string */
+ real6410_parse_features(&features, real6410_features_str);
+
+ printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
+ real6410_lcd_pdata[features.lcd_index].win[0]->xres,
+ real6410_lcd_pdata[features.lcd_index].win[0]->yres);
+
+ s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
+ s3c_nand_set_platdata(&real6410_nand_info);
+ s3c64xx_ts_set_platdata(NULL);
+
+ /* configure nCS1 width to 16 bits */
+
+ cs1 = __raw_readl(S3C64XX_SROM_BW) &
+ ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S3C64XX_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S3C64XX_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+
+ __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+ (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+ (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+ (13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+ (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+ gpio_request(S3C64XX_GPF(15), "LCD power");
+
+ platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
+}
+
+MACHINE_START(REAL6410, "REAL6410")
+ /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
+ .atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
+ .init_irq = s3c6410_init_irq,
+ .map_io = real6410_map_io,
+ .init_machine = real6410_machine_init,
+ .init_time = samsung_timer_init,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
+// Copyright (c) 2007-2010 Vasily Khoruzhick
+//
+// based on smdk2440 written by Ben Dooks
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/memblock.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/device.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/pwm.h>
+#include <linux/s3c_adc_battery.h>
+#include <linux/leds.h>
+#include <linux/i2c.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/fb-s3c2410.h>
+
+#include <sound/uda1380.h>
+
+#include <mach/hardware-s3c24xx.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/gpio-cfg.h>
+
+#include "s3c24xx.h"
+#include "h1940.h"
+
+#define LCD_PWM_PERIOD 192960
+#define LCD_PWM_DUTY 127353
+
+static struct map_desc rx1950_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0xf1,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+};
+
+static struct s3c2410fb_display rx1950_display = {
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+
+ .pixclock = 260000,
+ .left_margin = 10,
+ .right_margin = 20,
+ .hsync_len = 10,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .vsync_len = 2,
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVCLK |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_HWSWP |
+ (0x02 << 13) |
+ (0x02 << 15),
+
+};
+
+static int power_supply_init(struct device *dev)
+{
+ return gpio_request(S3C2410_GPF(2), "cable plugged");
+}
+
+static int rx1950_is_ac_online(void)
+{
+ return !gpio_get_value(S3C2410_GPF(2));
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(S3C2410_GPF(2));
+}
+
+static char *rx1950_supplicants[] = {
+ "main-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = rx1950_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = rx1950_supplicants,
+ .num_supplicants = ARRAY_SIZE(rx1950_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+ [0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
+ | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data =
+ &power_supply_info,
+ },
+ .resource = power_supply_resources,
+ .num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
+ { .volt = 4100, .cur = 156, .level = 100},
+ { .volt = 4050, .cur = 156, .level = 95},
+ { .volt = 4025, .cur = 141, .level = 90},
+ { .volt = 3995, .cur = 144, .level = 85},
+ { .volt = 3957, .cur = 162, .level = 80},
+ { .volt = 3931, .cur = 147, .level = 75},
+ { .volt = 3902, .cur = 147, .level = 70},
+ { .volt = 3863, .cur = 153, .level = 65},
+ { .volt = 3838, .cur = 150, .level = 60},
+ { .volt = 3800, .cur = 153, .level = 55},
+ { .volt = 3765, .cur = 153, .level = 50},
+ { .volt = 3748, .cur = 172, .level = 45},
+ { .volt = 3740, .cur = 153, .level = 40},
+ { .volt = 3714, .cur = 175, .level = 35},
+ { .volt = 3710, .cur = 156, .level = 30},
+ { .volt = 3963, .cur = 156, .level = 25},
+ { .volt = 3672, .cur = 178, .level = 20},
+ { .volt = 3651, .cur = 178, .level = 15},
+ { .volt = 3629, .cur = 178, .level = 10},
+ { .volt = 3612, .cur = 162, .level = 5},
+ { .volt = 3605, .cur = 162, .level = 0},
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
+ { .volt = 4200, .cur = 0, .level = 100},
+ { .volt = 4190, .cur = 0, .level = 99},
+ { .volt = 4178, .cur = 0, .level = 95},
+ { .volt = 4110, .cur = 0, .level = 70},
+ { .volt = 4076, .cur = 0, .level = 65},
+ { .volt = 4046, .cur = 0, .level = 60},
+ { .volt = 4021, .cur = 0, .level = 55},
+ { .volt = 3999, .cur = 0, .level = 50},
+ { .volt = 3982, .cur = 0, .level = 45},
+ { .volt = 3965, .cur = 0, .level = 40},
+ { .volt = 3957, .cur = 0, .level = 35},
+ { .volt = 3948, .cur = 0, .level = 30},
+ { .volt = 3936, .cur = 0, .level = 25},
+ { .volt = 3927, .cur = 0, .level = 20},
+ { .volt = 3906, .cur = 0, .level = 15},
+ { .volt = 3880, .cur = 0, .level = 10},
+ { .volt = 3829, .cur = 0, .level = 5},
+ { .volt = 3820, .cur = 0, .level = 0},
+};
+
+static int rx1950_bat_init(void)
+{
+ int ret;
+
+ ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
+ if (ret)
+ goto err_gpio1;
+ ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
+ if (ret)
+ goto err_gpio2;
+
+ return 0;
+
+err_gpio2:
+ gpio_free(S3C2410_GPJ(2));
+err_gpio1:
+ return ret;
+}
+
+static void rx1950_bat_exit(void)
+{
+ gpio_free(S3C2410_GPJ(2));
+ gpio_free(S3C2410_GPJ(3));
+}
+
+static void rx1950_enable_charger(void)
+{
+ gpio_direction_output(S3C2410_GPJ(2), 1);
+ gpio_direction_output(S3C2410_GPJ(3), 1);
+}
+
+static void rx1950_disable_charger(void)
+{
+ gpio_direction_output(S3C2410_GPJ(2), 0);
+ gpio_direction_output(S3C2410_GPJ(3), 0);
+}
+
+static DEFINE_SPINLOCK(rx1950_blink_spin);
+
+static int rx1950_led_blink_set(struct gpio_desc *desc, int state,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ int gpio = desc_to_gpio(desc);
+ int blink_gpio, check_gpio;
+
+ switch (gpio) {
+ case S3C2410_GPA(6):
+ blink_gpio = S3C2410_GPA(4);
+ check_gpio = S3C2410_GPA(3);
+ break;
+ case S3C2410_GPA(7):
+ blink_gpio = S3C2410_GPA(3);
+ check_gpio = S3C2410_GPA(4);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
+
+ if (delay_on && delay_off && !*delay_on && !*delay_off)
+ *delay_on = *delay_off = 500;
+
+ spin_lock(&rx1950_blink_spin);
+
+ switch (state) {
+ case GPIO_LED_NO_BLINK_LOW:
+ case GPIO_LED_NO_BLINK_HIGH:
+ if (!gpio_get_value(check_gpio))
+ gpio_set_value(S3C2410_GPJ(6), 0);
+ gpio_set_value(blink_gpio, 0);
+ gpio_set_value(gpio, state);
+ break;
+ case GPIO_LED_BLINK:
+ gpio_set_value(gpio, 0);
+ gpio_set_value(S3C2410_GPJ(6), 1);
+ gpio_set_value(blink_gpio, 1);
+ break;
+ }
+
+ spin_unlock(&rx1950_blink_spin);
+
+ return 0;
+}
+
+static struct gpio_led rx1950_leds_desc[] = {
+ {
+ .name = "Green",
+ .default_trigger = "main-battery-full",
+ .gpio = S3C2410_GPA(6),
+ .retain_state_suspended = 1,
+ },
+ {
+ .name = "Red",
+ .default_trigger
+ = "main-battery-charging-blink-full-solid",
+ .gpio = S3C2410_GPA(7),
+ .retain_state_suspended = 1,
+ },
+ {
+ .name = "Blue",
+ .default_trigger = "rx1950-acx-mem",
+ .gpio = S3C2410_GPA(11),
+ .retain_state_suspended = 1,
+ },
+};
+
+static struct gpio_led_platform_data rx1950_leds_pdata = {
+ .num_leds = ARRAY_SIZE(rx1950_leds_desc),
+ .leds = rx1950_leds_desc,
+ .gpio_blink_set = rx1950_led_blink_set,
+};
+
+static struct platform_device rx1950_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rx1950_leds_pdata,
+ },
+};
+
+static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
+ .init = rx1950_bat_init,
+ .exit = rx1950_bat_exit,
+ .enable_charger = rx1950_enable_charger,
+ .disable_charger = rx1950_disable_charger,
+ .gpio_charge_finished = S3C2410_GPF(3),
+ .lut_noac = bat_lut_noac,
+ .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
+ .lut_acin = bat_lut_acin,
+ .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
+ .volt_channel = 0,
+ .current_channel = 1,
+ .volt_mult = 4235,
+ .current_mult = 2900,
+ .internal_impedance = 200,
+};
+
+static struct platform_device rx1950_battery = {
+ .name = "s3c-adc-battery",
+ .id = -1,
+ .dev = {
+ .parent = &s3c_device_adc.dev,
+ .platform_data = &rx1950_bat_cfg,
+ },
+};
+
+static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
+ .displays = &rx1950_display,
+ .num_displays = 1,
+ .default_display = 0,
+
+ .lpcsel = 0x02,
+ .gpccon = 0xaa9556a9,
+ .gpccon_mask = 0xffc003fc,
+ .gpccon_reg = S3C2410_GPCCON,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+ .gpcup_reg = S3C2410_GPCUP,
+
+ .gpdcon = 0xaa90aaa1,
+ .gpdcon_mask = 0xffc0fff0,
+ .gpdcon_reg = S3C2410_GPDCON,
+ .gpdup = 0x0000fcfd,
+ .gpdup_mask = 0xffffffff,
+ .gpdup_reg = S3C2410_GPDUP,
+};
+
+static struct pwm_lookup rx1950_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000,
+ PWM_POLARITY_NORMAL),
+};
+
+static struct pwm_device *lcd_pwm;
+static struct pwm_state lcd_pwm_state;
+
+static void rx1950_lcd_power(int enable)
+{
+ int i;
+ static int enabled;
+ if (enabled == enable)
+ return;
+ if (!enable) {
+
+ /* GPC11-GPC15->OUTPUT */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPC(i), 1);
+
+ /* Wait a bit here... */
+ mdelay(100);
+
+ /* GPD2-GPD7->OUTPUT */
+ /* GPD11-GPD15->OUTPUT */
+ /* GPD2-GPD7->1, GPD11-GPD15->1 */
+ for (i = 2; i < 8; i++)
+ gpio_direction_output(S3C2410_GPD(i), 1);
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPD(i), 1);
+
+ /* Wait a bit here...*/
+ mdelay(100);
+
+ /* GPB0->OUTPUT, GPB0->0 */
+ gpio_direction_output(S3C2410_GPB(0), 0);
+
+ /* GPC1-GPC4->OUTPUT, GPC1-4->0 */
+ for (i = 1; i < 5; i++)
+ gpio_direction_output(S3C2410_GPC(i), 0);
+
+ /* GPC15-GPC11->0 */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPC(i), 0);
+
+ /* GPD15-GPD11->0, GPD2->GPD7->0 */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPD(i), 0);
+
+ for (i = 2; i < 8; i++)
+ gpio_direction_output(S3C2410_GPD(i), 0);
+
+ /* GPC6->0, GPC7->0, GPC5->0 */
+ gpio_direction_output(S3C2410_GPC(6), 0);
+ gpio_direction_output(S3C2410_GPC(7), 0);
+ gpio_direction_output(S3C2410_GPC(5), 0);
+
+ /* GPB1->OUTPUT, GPB1->0 */
+ gpio_direction_output(S3C2410_GPB(1), 0);
+
+ lcd_pwm_state.enabled = false;
+ pwm_apply_state(lcd_pwm, &lcd_pwm_state);
+
+ /* GPC0->0, GPC10->0 */
+ gpio_direction_output(S3C2410_GPC(0), 0);
+ gpio_direction_output(S3C2410_GPC(10), 0);
+ } else {
+ lcd_pwm_state.enabled = true;
+ pwm_apply_state(lcd_pwm, &lcd_pwm_state);
+
+ gpio_direction_output(S3C2410_GPC(0), 1);
+ gpio_direction_output(S3C2410_GPC(5), 1);
+
+ s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
+ gpio_direction_output(S3C2410_GPC(7), 1);
+
+ for (i = 1; i < 5; i++)
+ s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+ for (i = 11; i < 16; i++)
+ s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+ for (i = 2; i < 8; i++)
+ s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+ for (i = 11; i < 16; i++)
+ s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+ gpio_direction_output(S3C2410_GPC(10), 1);
+ gpio_direction_output(S3C2410_GPC(6), 1);
+ }
+ enabled = enable;
+}
+
+static void rx1950_bl_power(int enable)
+{
+ static int enabled;
+ if (enabled == enable)
+ return;
+ if (!enable) {
+ gpio_direction_output(S3C2410_GPB(0), 0);
+ } else {
+ /* LED driver need a "push" to power on */
+ gpio_direction_output(S3C2410_GPB(0), 1);
+ /* Warm up backlight for one period of PWM.
+ * Without this trick its almost impossible to
+ * enable backlight with low brightness value
+ */
+ ndelay(48000);
+ s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+ }
+ enabled = enable;
+}
+
+static int rx1950_backlight_init(struct device *dev)
+{
+ WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
+ lcd_pwm = pwm_request(1, "RX1950 LCD");
+ if (IS_ERR(lcd_pwm)) {
+ dev_err(dev, "Unable to request PWM for LCD power!\n");
+ return PTR_ERR(lcd_pwm);
+ }
+
+ /*
+ * This is only required to initialize .polarity; all other values are
+ * fixed in this driver.
+ */
+ pwm_init_state(lcd_pwm, &lcd_pwm_state);
+
+ lcd_pwm_state.period = LCD_PWM_PERIOD;
+ lcd_pwm_state.duty_cycle = LCD_PWM_DUTY;
+
+ rx1950_lcd_power(1);
+ rx1950_bl_power(1);
+
+ return 0;
+}
+
+static void rx1950_backlight_exit(struct device *dev)
+{
+ rx1950_bl_power(0);
+ rx1950_lcd_power(0);
+
+ pwm_free(lcd_pwm);
+ gpio_free(S3C2410_GPB(0));
+}
+
+
+static int rx1950_backlight_notify(struct device *dev, int brightness)
+{
+ if (!brightness) {
+ rx1950_bl_power(0);
+ rx1950_lcd_power(0);
+ } else {
+ rx1950_lcd_power(1);
+ rx1950_bl_power(1);
+ }
+ return brightness;
+}
+
+static struct platform_pwm_backlight_data rx1950_backlight_data = {
+ .max_brightness = 24,
+ .dft_brightness = 4,
+ .init = rx1950_backlight_init,
+ .notify = rx1950_backlight_notify,
+ .exit = rx1950_backlight_exit,
+};
+
+static struct platform_device rx1950_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &samsung_device_pwm.dev,
+ .platform_data = &rx1950_backlight_data,
+ },
+};
+
+static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
+{
+ s3c24xx_mci_def_set_power(power_mode, vdd);
+
+ switch (power_mode) {
+ case MMC_POWER_OFF:
+ gpio_direction_output(S3C2410_GPJ(1), 0);
+ break;
+ case MMC_POWER_UP:
+ case MMC_POWER_ON:
+ gpio_direction_output(S3C2410_GPJ(1), 1);
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
+ .set_power = rx1950_set_mmc_power,
+ .ocr_avail = MMC_VDD_32_33,
+};
+
+static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* Card detect S3C2410_GPF(5) */
+ GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
+ /* Write protect S3C2410_GPH(8) */
+ GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct mtd_partition rx1950_nand_part[] = {
+ [0] = {
+ .name = "Boot0",
+ .offset = 0,
+ .size = 0x4000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [1] = {
+ .name = "Boot1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x40000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [2] = {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x300000,
+ .mask_flags = 0,
+ },
+ [3] = {
+ .name = "Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ },
+};
+
+static struct s3c2410_nand_set rx1950_nand_sets[] = {
+ [0] = {
+ .name = "Internal",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(rx1950_nand_part),
+ .partitions = rx1950_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand rx1950_nand_info = {
+ .tacls = 25,
+ .twrph0 = 50,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(rx1950_nand_sets),
+ .sets = rx1950_nand_sets,
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
+ .vbus_pin = S3C2410_GPG(5),
+ .vbus_pin_inverted = 1,
+ .pullup_pin = S3C2410_GPJ(5),
+};
+
+static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 3,
+};
+
+static struct gpio_keys_button rx1950_gpio_keys_table[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = S3C2410_GPF(0),
+ .active_low = 1,
+ .desc = "Power button",
+ .wakeup = 1,
+ },
+ {
+ .code = KEY_F5,
+ .gpio = S3C2410_GPF(7),
+ .active_low = 1,
+ .desc = "Record button",
+ },
+ {
+ .code = KEY_F1,
+ .gpio = S3C2410_GPG(0),
+ .active_low = 1,
+ .desc = "Calendar button",
+ },
+ {
+ .code = KEY_F2,
+ .gpio = S3C2410_GPG(2),
+ .active_low = 1,
+ .desc = "Contacts button",
+ },
+ {
+ .code = KEY_F3,
+ .gpio = S3C2410_GPG(3),
+ .active_low = 1,
+ .desc = "Mail button",
+ },
+ {
+ .code = KEY_F4,
+ .gpio = S3C2410_GPG(7),
+ .active_low = 1,
+ .desc = "WLAN button",
+ },
+ {
+ .code = KEY_LEFT,
+ .gpio = S3C2410_GPG(10),
+ .active_low = 1,
+ .desc = "Left button",
+ },
+ {
+ .code = KEY_RIGHT,
+ .gpio = S3C2410_GPG(11),
+ .active_low = 1,
+ .desc = "Right button",
+ },
+ {
+ .code = KEY_UP,
+ .gpio = S3C2410_GPG(4),
+ .active_low = 1,
+ .desc = "Up button",
+ },
+ {
+ .code = KEY_DOWN,
+ .gpio = S3C2410_GPG(6),
+ .active_low = 1,
+ .desc = "Down button",
+ },
+ {
+ .code = KEY_ENTER,
+ .gpio = S3C2410_GPG(9),
+ .active_low = 1,
+ .desc = "Ok button"
+ },
+};
+
+static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
+ .buttons = rx1950_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
+};
+
+static struct platform_device rx1950_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev.platform_data = &rx1950_gpio_keys_data,
+};
+
+static struct uda1380_platform_data uda1380_info = {
+ .gpio_power = S3C2410_GPJ(0),
+ .gpio_reset = S3C2410_GPD(0),
+ .dac_clk = UDA1380_DAC_CLK_SYSCLK,
+};
+
+static struct i2c_board_info rx1950_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("uda1380", 0x1a),
+ .platform_data = &uda1380_info,
+ },
+};
+
+static struct gpiod_lookup_table rx1950_audio_gpio_table = {
+ .dev_id = "rx1950-audio",
+ .table = {
+ GPIO_LOOKUP("GPIOG", 12, "hp-gpio", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOA", 1, "speaker-power", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct platform_device rx1950_audio = {
+ .name = "rx1950-audio",
+ .id = -1,
+};
+
+static struct platform_device *rx1950_devices[] __initdata = {
+ &s3c2410_device_dclk,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_usbgadget,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &s3c_device_sdi,
+ &s3c_device_adc,
+ &s3c_device_ts,
+ &samsung_device_pwm,
+ &rx1950_backlight,
+ &rx1950_device_gpiokeys,
+ &power_supply,
+ &rx1950_battery,
+ &rx1950_leds,
+ &rx1950_audio,
+};
+
+static void __init rx1950_map_io(void)
+{
+ s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
+ s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+
+ /* setup PM */
+
+#ifdef CONFIG_PM_H1940
+ memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
+#endif
+
+ s3c_pm_init();
+}
+
+static void __init rx1950_init_time(void)
+{
+ s3c2442_init_clocks(16934000);
+ samsung_timer_init();
+}
+
+static void __init rx1950_init_machine(void)
+{
+ int i;
+
+ s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
+ s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
+ s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
+ gpiod_add_lookup_table(&rx1950_mmc_gpio_table);
+ s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
+ s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&rx1950_nand_info);
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ /* mmc power is disabled by default */
+ WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
+ gpio_direction_output(S3C2410_GPJ(1), 0);
+
+ for (i = 0; i < 8; i++)
+ WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+ for (i = 10; i < 16; i++)
+ WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+ for (i = 2; i < 8; i++)
+ WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+ for (i = 11; i < 16; i++)
+ WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+ WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
+
+ WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
+ WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
+ WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
+ gpio_direction_output(S3C2410_GPA(3), 0);
+ gpio_direction_output(S3C2410_GPA(4), 0);
+ gpio_direction_output(S3C2410_GPJ(6), 0);
+
+ pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
+ gpiod_add_lookup_table(&rx1950_audio_gpio_table);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+ platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
+
+ i2c_register_board_info(0, rx1950_i2c_devices,
+ ARRAY_SIZE(rx1950_i2c_devices));
+}
+
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx1950_reserve(void)
+{
+ memblock_reserve(0x30003000, 0x1000);
+ memblock_reserve(0x30081000, 0x1000);
+}
+
+MACHINE_START(RX1950, "HP iPAQ RX1950")
+ /* Maintainers: Vasily Khoruzhick */
+ .atag_offset = 0x100,
+ .map_io = rx1950_map_io,
+ .reserve = rx1950_reserve,
+ .init_irq = s3c2442_init_irq,
+ .init_machine = rx1950_init_machine,
+ .init_time = rx1950_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2003-2004 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// https://www.handhelds.org/projects/rx3715.html
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/memblock.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/fb-s3c2410.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <plat/gpio-cfg.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+
+#include "s3c24xx.h"
+#include "h1940.h"
+
+static struct map_desc rx3715_iodesc[] __initdata = {
+ /* dump ISA space somewhere unused */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS3),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS3),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x00,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .uart_flags = UPF_CONS_FLOW,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ .clk_sel = S3C2410_UCON_CLKSEL3,
+ }
+};
+
+/* framebuffer lcd controller information */
+
+static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
+ .lcdcon5 = S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+
+ .pixclock = 260000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 36,
+ .right_margin = 36,
+ .hsync_len = 8,
+ .upper_margin = 6,
+ .lower_margin = 7,
+ .vsync_len = 3,
+};
+
+static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
+
+ .displays = &rx3715_lcdcfg,
+ .num_displays = 1,
+ .default_display = 0,
+
+ .lpcsel = 0xf82,
+
+ .gpccon = 0xaa955699,
+ .gpccon_mask = 0xffc003cc,
+ .gpccon_reg = S3C2410_GPCCON,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+ .gpcup_reg = S3C2410_GPCUP,
+
+ .gpdcon = 0xaa95aaa1,
+ .gpdcon_mask = 0xffc0fff0,
+ .gpdcon_reg = S3C2410_GPDCON,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+ .gpdup_reg = S3C2410_GPDUP,
+};
+
+static struct mtd_partition __initdata rx3715_nand_part[] = {
+ [0] = {
+ .name = "Whole Flash",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
+ [0] = {
+ .name = "Internal",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(rx3715_nand_part),
+ .partitions = rx3715_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
+ .tacls = 25,
+ .twrph0 = 50,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(rx3715_nand_sets),
+ .sets = rx3715_nand_sets,
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+static struct platform_device *rx3715_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_nand,
+};
+
+static void __init rx3715_map_io(void)
+{
+ s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
+ s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init rx3715_init_time(void)
+{
+ s3c2440_init_clocks(16934000);
+ samsung_timer_init();
+}
+
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx3715_reserve(void)
+{
+ memblock_reserve(0x30003000, 0x1000);
+ memblock_reserve(0x30081000, 0x1000);
+}
+
+static void __init rx3715_init_machine(void)
+{
+#ifdef CONFIG_PM_H1940
+ memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
+ s3c_pm_init();
+
+ s3c_nand_set_platdata(&rx3715_nand_info);
+ s3c24xx_fb_set_platdata(&rx3715_fb_info);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+ platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
+}
+
+MACHINE_START(RX3715, "IPAQ-RX3715")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+ .map_io = rx3715_map_io,
+ .reserve = rx3715_reserve,
+ .init_irq = s3c2440_init_irq,
+ .init_machine = rx3715_init_machine,
+ .init_time = rx3715_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Samsung's S3C2416 flattened device tree enabled machine
+//
+// Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
+//
+// based on mach-exynos/mach-exynos4-dt.c
+//
+// Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+// http://www.samsung.com
+// Copyright (c) 2010-2011 Linaro Ltd.
+// www.linaro.org
+
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
+#include <linux/serial_s3c.h>
+
+#include <asm/mach/arch.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include "s3c24xx.h"
+
+static void __init s3c2416_dt_map_io(void)
+{
+ s3c24xx_init_io(NULL, 0);
+}
+
+static void __init s3c2416_dt_machine_init(void)
+{
+ s3c_pm_init();
+}
+
+static const char *const s3c2416_dt_compat[] __initconst = {
+ "samsung,s3c2416",
+ "samsung,s3c2450",
+ NULL
+};
+
+DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
+ /* Maintainer: Heiko Stuebner <heiko@sntech.de> */
+ .dt_compat = s3c2416_dt_compat,
+ .map_io = s3c2416_dt_map_io,
+ .init_irq = irqchip_init,
+ .init_machine = s3c2416_dt_machine_init,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Samsung's S3C64XX flattened device tree enabled machine
+//
+// Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#include <plat/cpu.h>
+#include <mach/map.h>
+
+#include "s3c64xx.h"
+
+/*
+ * IO mapping for shared system controller IP.
+ *
+ * FIXME: Make remaining drivers use dynamic mapping.
+ */
+static struct map_desc s3c64xx_dt_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init s3c64xx_dt_map_io(void)
+{
+ debug_ll_io_init();
+ iotable_init(s3c64xx_dt_iodesc, ARRAY_SIZE(s3c64xx_dt_iodesc));
+
+ s3c64xx_init_cpu();
+
+ if (!soc_is_s3c64xx())
+ panic("SoC is not S3C64xx!");
+}
+
+static const char *const s3c64xx_dt_compat[] __initconst = {
+ "samsung,s3c6400",
+ "samsung,s3c6410",
+ NULL
+};
+
+DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
+ /* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
+ .dt_compat = s3c64xx_dt_compat,
+ .map_io = s3c64xx_dt_map_io,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2010 Maurus Cuelenaere
+
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/platform_data/s3c-hsotg.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/gpio-cfg.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include <plat/sdhci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
+#include <video/platform_lcd.h>
+
+#include "s3c64xx.h"
+#include "mach-smartq.h"
+#include "regs-modem-s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg smartq_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static void smartq_usb_host_powercontrol(int port, int to)
+{
+ pr_debug("%s(%d, %d)\n", __func__, port, to);
+
+ if (port == 0) {
+ gpio_set_value(S3C64XX_GPL(0), to);
+ gpio_set_value(S3C64XX_GPL(1), to);
+ }
+}
+
+static irqreturn_t smartq_usb_host_ocirq(int irq, void *pw)
+{
+ struct s3c2410_hcd_info *info = pw;
+
+ if (gpio_get_value(S3C64XX_GPL(10)) == 0) {
+ pr_debug("%s: over-current irq (oc detected)\n", __func__);
+ s3c2410_usb_report_oc(info, 3);
+ } else {
+ pr_debug("%s: over-current irq (oc cleared)\n", __func__);
+ s3c2410_usb_report_oc(info, 0);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)
+{
+ int ret;
+
+ /* This isn't present on a SmartQ 5 board */
+ if (machine_is_smartq5())
+ return;
+
+ if (on) {
+ ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)),
+ smartq_usb_host_ocirq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "USB host overcurrent", info);
+ if (ret != 0)
+ pr_err("failed to request usb oc irq: %d\n", ret);
+ } else {
+ free_irq(gpio_to_irq(S3C64XX_GPL(10)), info);
+ }
+}
+
+static struct s3c2410_hcd_info smartq_usb_host_info = {
+ .port[0] = {
+ .flags = S3C_HCDFLG_USED
+ },
+ .port[1] = {
+ .flags = 0
+ },
+
+ .power_control = smartq_usb_host_powercontrol,
+ .enable_oc = smartq_usb_host_enableoc,
+};
+
+static struct gpiod_lookup_table smartq_usb_otg_vbus_gpiod_table = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ GPIO_LOOKUP("GPL", 9, "vbus", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct platform_device smartq_usb_otg_vbus_dev = {
+ .name = "gpio-vbus",
+};
+
+static struct pwm_lookup smartq_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+ 1000000000 / (1000 * 20), PWM_POLARITY_NORMAL),
+};
+
+static int smartq_bl_init(struct device *dev)
+{
+ s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
+
+ return 0;
+}
+
+static struct platform_pwm_backlight_data smartq_backlight_data = {
+ .max_brightness = 1000,
+ .dft_brightness = 600,
+ .init = smartq_bl_init,
+};
+
+static struct platform_device smartq_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &samsung_device_pwm.dev,
+ .platform_data = &smartq_backlight_data,
+ },
+};
+
+static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = {
+ .delay = 65535,
+ .presc = 99,
+ .oversampling_shift = 4,
+};
+
+static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+};
+
+static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
+ /* Battery voltage (?-4.2V) */
+ .in[0] = &(struct s3c_hwmon_chcfg) {
+ .name = "smartq:battery-voltage",
+ .mult = 3300,
+ .div = 2048,
+ },
+ /* Reference voltage (1.2V) */
+ .in[1] = &(struct s3c_hwmon_chcfg) {
+ .name = "smartq:reference-voltage",
+ .mult = 3300,
+ .div = 4096,
+ },
+};
+
+static struct dwc2_hsotg_plat smartq_hsotg_pdata;
+
+static int __init smartq_lcd_setup_gpio(void)
+{
+ int ret;
+
+ ret = gpio_request(S3C64XX_GPM(3), "LCD power");
+ if (ret < 0)
+ return ret;
+
+ /* turn power off */
+ gpio_direction_output(S3C64XX_GPM(3), 0);
+
+ return 0;
+}
+
+/* GPM0 -> CS */
+static struct spi_gpio_platform_data smartq_lcd_control = {
+ .num_chipselect = 1,
+};
+
+static struct platform_device smartq_lcd_control_device = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev.platform_data = &smartq_lcd_control,
+};
+
+static struct gpiod_lookup_table smartq_lcd_control_gpiod_table = {
+ .dev_id = "spi_gpio",
+ .table = {
+ GPIO_LOOKUP("GPIOM", 1,
+ "sck", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOM", 2,
+ "mosi", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOM", 3,
+ "miso", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOM", 0,
+ "cs", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
+{
+ gpio_direction_output(S3C64XX_GPM(3), power);
+}
+
+static struct plat_lcd_data smartq_lcd_power_data = {
+ .set_power = smartq_lcd_power_set,
+};
+
+static struct platform_device smartq_lcd_power_device = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smartq_lcd_power_data,
+};
+
+static struct i2c_board_info smartq_i2c_devs[] __initdata = {
+ { I2C_BOARD_INFO("wm8987", 0x1a), },
+};
+
+static struct platform_device *smartq_devices[] __initdata = {
+ &s3c_device_hsmmc1, /* Init iNAND first, ... */
+ &s3c_device_hsmmc0, /* ... then the external SD card */
+ &s3c_device_hsmmc2,
+ &s3c_device_adc,
+ &s3c_device_fb,
+ &s3c_device_hwmon,
+ &s3c_device_i2c0,
+ &s3c_device_ohci,
+ &s3c_device_rtc,
+ &samsung_device_pwm,
+ &s3c_device_usb_hsotg,
+ &s3c64xx_device_iis0,
+ &smartq_backlight_device,
+ &smartq_lcd_control_device,
+ &smartq_lcd_power_device,
+ &smartq_usb_otg_vbus_dev,
+};
+
+static void __init smartq_lcd_mode_set(void)
+{
+ u32 tmp;
+
+ /* set the LCD type */
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the LCD bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+static void smartq_power_off(void)
+{
+ gpio_direction_output(S3C64XX_GPK(15), 1);
+}
+
+static int __init smartq_power_off_init(void)
+{
+ int ret;
+
+ ret = gpio_request(S3C64XX_GPK(15), "Power control");
+ if (ret < 0) {
+ pr_err("%s: failed to get GPK15\n", __func__);
+ return ret;
+ }
+
+ /* leave power on */
+ gpio_direction_output(S3C64XX_GPK(15), 0);
+
+ pm_power_off = smartq_power_off;
+
+ return ret;
+}
+
+static int __init smartq_usb_host_init(void)
+{
+ int ret;
+
+ ret = gpio_request(S3C64XX_GPL(0), "USB power control");
+ if (ret < 0) {
+ pr_err("%s: failed to get GPL0\n", __func__);
+ return ret;
+ }
+
+ ret = gpio_request(S3C64XX_GPL(1), "USB host power control");
+ if (ret < 0) {
+ pr_err("%s: failed to get GPL1\n", __func__);
+ goto err;
+ }
+
+ if (!machine_is_smartq5()) {
+ /* This isn't present on a SmartQ 5 board */
+ ret = gpio_request(S3C64XX_GPL(10), "USB host overcurrent");
+ if (ret < 0) {
+ pr_err("%s: failed to get GPL10\n", __func__);
+ goto err2;
+ }
+ }
+
+ /* turn power off */
+ gpio_direction_output(S3C64XX_GPL(0), 0);
+ gpio_direction_output(S3C64XX_GPL(1), 0);
+ if (!machine_is_smartq5())
+ gpio_direction_input(S3C64XX_GPL(10));
+
+ s3c_device_ohci.dev.platform_data = &smartq_usb_host_info;
+
+ return 0;
+
+err2:
+ gpio_free(S3C64XX_GPL(1));
+err:
+ gpio_free(S3C64XX_GPL(0));
+ return ret;
+}
+
+static int __init smartq_wifi_init(void)
+{
+ int ret;
+
+ ret = gpio_request(S3C64XX_GPK(1), "wifi control");
+ if (ret < 0) {
+ pr_err("%s: failed to get GPK1\n", __func__);
+ return ret;
+ }
+
+ ret = gpio_request(S3C64XX_GPK(2), "wifi reset");
+ if (ret < 0) {
+ pr_err("%s: failed to get GPK2\n", __func__);
+ gpio_free(S3C64XX_GPK(1));
+ return ret;
+ }
+
+ /* turn power on */
+ gpio_direction_output(S3C64XX_GPK(1), 1);
+
+ /* reset device */
+ gpio_direction_output(S3C64XX_GPK(2), 0);
+ mdelay(100);
+ gpio_set_value(S3C64XX_GPK(2), 1);
+ gpio_direction_input(S3C64XX_GPK(2));
+
+ return 0;
+}
+
+static struct map_desc smartq_iodesc[] __initdata = {};
+void __init smartq_map_io(void)
+{
+ s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
+ s3c64xx_set_xtal_freq(12000000);
+ s3c64xx_set_xusbxti_freq(12000000);
+ s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+
+ smartq_lcd_mode_set();
+}
+
+static struct gpiod_lookup_table smartq_audio_gpios = {
+ .dev_id = "smartq-audio",
+ .table = {
+ GPIO_LOOKUP("GPL", 12, "headphone detect", 0),
+ GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0),
+ { },
+ },
+};
+
+void __init smartq_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ dwc2_hsotg_set_platdata(&smartq_hsotg_pdata);
+ s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
+ s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
+ s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
+ s3c64xx_ts_set_platdata(&smartq_touchscreen_pdata);
+
+ i2c_register_board_info(0, smartq_i2c_devs,
+ ARRAY_SIZE(smartq_i2c_devs));
+
+ WARN_ON(smartq_lcd_setup_gpio());
+ WARN_ON(smartq_power_off_init());
+ WARN_ON(smartq_usb_host_init());
+ WARN_ON(smartq_wifi_init());
+
+ pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
+ gpiod_add_lookup_table(&smartq_lcd_control_gpiod_table);
+ gpiod_add_lookup_table(&smartq_usb_otg_vbus_gpiod_table);
+ platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
+
+ gpiod_add_lookup_table(&smartq_audio_gpios);
+ platform_device_register_simple("smartq-audio", -1, NULL, 0);
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * linux/arch/arm/mach-s3c64xx/mach-smartq.h
+ *
+ * Copyright (C) 2010 Maurus Cuelenaere
+ */
+
+#ifndef __MACH_SMARTQ_H
+#define __MACH_SMARTQ_H __FILE__
+
+#include <linux/init.h>
+
+extern void __init smartq_map_io(void);
+extern void __init smartq_machine_init(void);
+
+#endif /* __MACH_SMARTQ_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2010 Maurus Cuelenaere
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <video/samsung_fimd.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#include "s3c64xx.h"
+#include "mach-smartq.h"
+
+static struct gpio_led smartq5_leds[] = {
+ {
+ .name = "smartq5:green",
+ .active_low = 1,
+ .gpio = S3C64XX_GPN(8),
+ },
+ {
+ .name = "smartq5:red",
+ .active_low = 1,
+ .gpio = S3C64XX_GPN(9),
+ },
+};
+
+static struct gpio_led_platform_data smartq5_led_data = {
+ .num_leds = ARRAY_SIZE(smartq5_leds),
+ .leds = smartq5_leds,
+};
+
+static struct platform_device smartq5_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &smartq5_led_data,
+};
+
+/* Labels according to the SmartQ manual */
+static struct gpio_keys_button smartq5_buttons[] = {
+ {
+ .gpio = S3C64XX_GPL(14),
+ .code = KEY_POWER,
+ .desc = "Power",
+ .active_low = 1,
+ .debounce_interval = 5,
+ .type = EV_KEY,
+ },
+ {
+ .gpio = S3C64XX_GPN(2),
+ .code = KEY_KPMINUS,
+ .desc = "Minus",
+ .active_low = 1,
+ .debounce_interval = 5,
+ .type = EV_KEY,
+ },
+ {
+ .gpio = S3C64XX_GPN(12),
+ .code = KEY_KPPLUS,
+ .desc = "Plus",
+ .active_low = 1,
+ .debounce_interval = 5,
+ .type = EV_KEY,
+ },
+ {
+ .gpio = S3C64XX_GPN(15),
+ .code = KEY_ENTER,
+ .desc = "Move",
+ .active_low = 1,
+ .debounce_interval = 5,
+ .type = EV_KEY,
+ },
+};
+
+static struct gpio_keys_platform_data smartq5_buttons_data = {
+ .buttons = smartq5_buttons,
+ .nbuttons = ARRAY_SIZE(smartq5_buttons),
+};
+
+static struct platform_device smartq5_buttons_device = {
+ .name = "gpio-keys",
+ .id = 0,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &smartq5_buttons_data,
+ }
+};
+
+static struct s3c_fb_pd_win smartq5_fb_win0 = {
+ .max_bpp = 32,
+ .default_bpp = 16,
+ .xres = 800,
+ .yres = 480,
+};
+
+static struct fb_videomode smartq5_lcd_timing = {
+ .left_margin = 216,
+ .right_margin = 40,
+ .upper_margin = 35,
+ .lower_margin = 10,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ .refresh = 80,
+};
+
+static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .vtiming = &smartq5_lcd_timing,
+ .win[0] = &smartq5_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+ VIDCON1_INV_VDEN,
+};
+
+static struct platform_device *smartq5_devices[] __initdata = {
+ &smartq5_leds_device,
+ &smartq5_buttons_device,
+};
+
+static void __init smartq5_machine_init(void)
+{
+ s3c_fb_set_platdata(&smartq5_lcd_pdata);
+
+ smartq_machine_init();
+
+ platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
+}
+
+MACHINE_START(SMARTQ5, "SmartQ 5")
+ /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
+ .atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
+ .init_irq = s3c6410_init_irq,
+ .map_io = smartq_map_io,
+ .init_machine = smartq5_machine_init,
+ .init_time = samsung_timer_init,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2010 Maurus Cuelenaere
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <video/samsung_fimd.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#include "s3c64xx.h"
+#include "mach-smartq.h"
+
+static struct gpio_led smartq7_leds[] = {
+ {
+ .name = "smartq7:red",
+ .active_low = 1,
+ .gpio = S3C64XX_GPN(8),
+ },
+ {
+ .name = "smartq7:green",
+ .active_low = 1,
+ .gpio = S3C64XX_GPN(9),
+ },
+};
+
+static struct gpio_led_platform_data smartq7_led_data = {
+ .num_leds = ARRAY_SIZE(smartq7_leds),
+ .leds = smartq7_leds,
+};
+
+static struct platform_device smartq7_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &smartq7_led_data,
+};
+
+/* Labels according to the SmartQ manual */
+static struct gpio_keys_button smartq7_buttons[] = {
+ {
+ .gpio = S3C64XX_GPL(14),
+ .code = KEY_POWER,
+ .desc = "Power",
+ .active_low = 1,
+ .debounce_interval = 5,
+ .type = EV_KEY,
+ },
+ {
+ .gpio = S3C64XX_GPN(2),
+ .code = KEY_FN,
+ .desc = "Function",
+ .active_low = 1,
+ .debounce_interval = 5,
+ .type = EV_KEY,
+ },
+ {
+ .gpio = S3C64XX_GPN(3),
+ .code = KEY_KPMINUS,
+ .desc = "Minus",
+ .active_low = 1,
+ .debounce_interval = 5,
+ .type = EV_KEY,
+ },
+ {
+ .gpio = S3C64XX_GPN(4),
+ .code = KEY_KPPLUS,
+ .desc = "Plus",
+ .active_low = 1,
+ .debounce_interval = 5,
+ .type = EV_KEY,
+ },
+ {
+ .gpio = S3C64XX_GPN(12),
+ .code = KEY_ENTER,
+ .desc = "Enter",
+ .active_low = 1,
+ .debounce_interval = 5,
+ .type = EV_KEY,
+ },
+ {
+ .gpio = S3C64XX_GPN(15),
+ .code = KEY_ESC,
+ .desc = "Cancel",
+ .active_low = 1,
+ .debounce_interval = 5,
+ .type = EV_KEY,
+ },
+};
+
+static struct gpio_keys_platform_data smartq7_buttons_data = {
+ .buttons = smartq7_buttons,
+ .nbuttons = ARRAY_SIZE(smartq7_buttons),
+};
+
+static struct platform_device smartq7_buttons_device = {
+ .name = "gpio-keys",
+ .id = 0,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &smartq7_buttons_data,
+ }
+};
+
+static struct s3c_fb_pd_win smartq7_fb_win0 = {
+ .max_bpp = 32,
+ .default_bpp = 16,
+ .xres = 800,
+ .yres = 480,
+};
+
+static struct fb_videomode smartq7_lcd_timing = {
+ .left_margin = 3,
+ .right_margin = 5,
+ .upper_margin = 1,
+ .lower_margin = 20,
+ .hsync_len = 10,
+ .vsync_len = 3,
+ .xres = 800,
+ .yres = 480,
+ .refresh = 80,
+};
+
+static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .vtiming = &smartq7_lcd_timing,
+ .win[0] = &smartq7_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+ VIDCON1_INV_VCLK,
+};
+
+static struct platform_device *smartq7_devices[] __initdata = {
+ &smartq7_leds_device,
+ &smartq7_buttons_device,
+};
+
+static void __init smartq7_machine_init(void)
+{
+ s3c_fb_set_platdata(&smartq7_lcd_pdata);
+
+ smartq_machine_init();
+
+ platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
+}
+
+MACHINE_START(SMARTQ7, "SmartQ 7")
+ /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
+ .atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
+ .init_irq = s3c6410_init_irq,
+ .map_io = smartq_map_io,
+ .init_machine = smartq7_machine_init,
+ .init_time = samsung_timer_init,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2004 by FS Forth-Systeme GmbH
+// All rights reserved.
+//
+// @Author: Jonas Dietsche
+//
+// @History:
+// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
+// Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/gpio-samsung.h>
+#include <plat/gpio-cfg.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
+
+static struct map_desc smdk2410_iodesc[] __initdata = {
+ /* nothing here yet */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+static struct platform_device *smdk2410_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+};
+
+static void __init smdk2410_map_io(void)
+{
+ s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
+ s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init smdk2410_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void __init smdk2410_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+ smdk_machine_init();
+}
+
+MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
+ * to SMDK2410 */
+ /* Maintainer: Jonas Dietsche */
+ .atag_offset = 0x100,
+ .map_io = smdk2410_map_io,
+ .init_irq = s3c2410_init_irq,
+ .init_machine = smdk2410_init,
+ .init_time = smdk2410_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the
+// loans of SMDK2413 to work with.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/memblock.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware-s3c24xx.h>
+#include <asm/hardware/iomd.h>
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+//#include <asm/debug-ll.h>
+#include <mach/regs-gpio.h>
+
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/fb-s3c2410.h>
+#include <mach/gpio-samsung.h>
+#include <plat/gpio-cfg.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
+
+static struct map_desc smdk2413_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ }
+};
+
+
+static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
+ .pullup_pin = S3C2410_GPF(2),
+};
+
+
+static struct platform_device *smdk2413_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_usbgadget,
+ &s3c2412_device_dma,
+};
+
+static void __init smdk2413_fixup(struct tag *tags, char **cmdline)
+{
+ if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
+ memblock_add(0x30000000, SZ_64M);
+ }
+}
+
+static void __init smdk2413_map_io(void)
+{
+ s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
+ s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init smdk2413_init_time(void)
+{
+ s3c2412_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void __init smdk2413_machine_init(void)
+{ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+
+ s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
+ s3c_i2c0_set_platdata(NULL);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
+ platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
+ smdk_machine_init();
+}
+
+MACHINE_START(S3C2413, "S3C2413")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+
+ .fixup = smdk2413_fixup,
+ .init_irq = s3c2412_init_irq,
+ .map_io = smdk2413_map_io,
+ .init_machine = smdk2413_machine_init,
+ .init_time = samsung_timer_init,
+MACHINE_END
+
+MACHINE_START(SMDK2412, "SMDK2412")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+
+ .fixup = smdk2413_fixup,
+ .init_irq = s3c2412_init_irq,
+ .map_io = smdk2413_map_io,
+ .init_machine = smdk2413_machine_init,
+ .init_time = samsung_timer_init,
+MACHINE_END
+
+MACHINE_START(SMDK2413, "SMDK2413")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+
+ .fixup = smdk2413_fixup,
+ .init_irq = s3c2412_init_irq,
+ .map_io = smdk2413_map_io,
+ .init_machine = smdk2413_machine_init,
+ .init_time = smdk2413_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+// as part of OpenInkpot project
+// Copyright (c) 2009 Promwad Innovation Company
+// Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <video/samsung_fimd.h>
+#include <mach/hardware-s3c24xx.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-s3c2443-clock.h>
+#include <mach/gpio-samsung.h>
+
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <plat/sdhci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/s3c-hsudc.h>
+
+#include <plat/fb.h>
+
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
+
+static struct map_desc smdk2416_iodesc[] __initdata = {
+ /* ISA IO Space map (memory space selected by A24) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }
+};
+
+#define UCON (S3C2410_UCON_DEFAULT | \
+ S3C2440_UCON_PCLK | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+
+#define UFCON (S3C2410_UFCON_RXTRIG8 | \
+ S3C2410_UFCON_FIFOMODE | \
+ S3C2440_UFCON_TXTRIG16)
+
+static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON | 0x50,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+static void smdk2416_hsudc_gpio_init(void)
+{
+ s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_UP);
+ s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_NONE);
+ s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(1));
+ s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 0);
+}
+
+static void smdk2416_hsudc_gpio_uninit(void)
+{
+ s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 1);
+ s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_NONE);
+ s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(0));
+}
+
+static struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = {
+ .epnum = 9,
+ .gpio_init = smdk2416_hsudc_gpio_init,
+ .gpio_uninit = smdk2416_hsudc_gpio_uninit,
+};
+
+static struct s3c_fb_pd_win smdk2416_fb_win[] = {
+ [0] = {
+ .default_bpp = 16,
+ .max_bpp = 32,
+ .xres = 800,
+ .yres = 480,
+ },
+};
+
+static struct fb_videomode smdk2416_lcd_timing = {
+ .pixclock = 41094,
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+};
+
+static void s3c2416_fb_gpio_setup_24bpp(void)
+{
+ unsigned int gpio;
+
+ for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+}
+
+static struct s3c_fb_platdata smdk2416_fb_platdata = {
+ .win[0] = &smdk2416_fb_win[0],
+ .vtiming = &smdk2416_lcd_timing,
+ .setup_gpio = s3c2416_fb_gpio_setup_24bpp,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct s3c_sdhci_platdata smdk2416_hsmmc0_pdata __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S3C2410_GPF(1),
+ .ext_cd_gpio_invert = 1,
+};
+
+static struct s3c_sdhci_platdata smdk2416_hsmmc1_pdata __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_NONE,
+};
+
+static struct platform_device *smdk2416_devices[] __initdata = {
+ &s3c_device_fb,
+ &s3c_device_wdt,
+ &s3c_device_ohci,
+ &s3c_device_i2c0,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_usb_hsudc,
+ &s3c2443_device_dma,
+};
+
+static void __init smdk2416_init_time(void)
+{
+ s3c2416_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void __init smdk2416_map_io(void)
+{
+ s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
+ s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init smdk2416_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_fb_set_platdata(&smdk2416_fb_platdata);
+
+ s3c_sdhci0_set_platdata(&smdk2416_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&smdk2416_hsmmc1_pdata);
+
+ s3c24xx_hsudc_set_platdata(&smdk2416_hsudc_platdata);
+
+ gpio_request(S3C2410_GPB(4), "USBHost Power");
+ gpio_direction_output(S3C2410_GPB(4), 1);
+
+ gpio_request(S3C2410_GPB(3), "Display Power");
+ gpio_direction_output(S3C2410_GPB(3), 1);
+
+ gpio_request(S3C2410_GPB(1), "Display Reset");
+ gpio_direction_output(S3C2410_GPB(1), 1);
+
+ platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices));
+ smdk_machine_init();
+}
+
+MACHINE_START(SMDK2416, "SMDK2416")
+ /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
+ .atag_offset = 0x100,
+
+ .init_irq = s3c2416_init_irq,
+ .map_io = smdk2416_map_io,
+ .init_machine = smdk2416_machine_init,
+ .init_time = smdk2416_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+// linux/arch/arm/mach-s3c2440/mach-smdk2440.c
+//
+// Copyright (c) 2004-2005 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// http://www.fluff.org/ben/smdk2440/
+//
+// Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <plat/gpio-cfg.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
+
+static struct map_desc smdk2440_iodesc[] __initdata = {
+ /* ISA IO Space map (memory space selected by A24) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ }
+};
+
+/* LCD driver info */
+
+static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+
+ .width = 240,
+ .height = 320,
+
+ .pixclock = 166667, /* HCLK 60 MHz, divisor 10 */
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 20,
+ .right_margin = 8,
+ .hsync_len = 4,
+ .upper_margin = 8,
+ .lower_margin = 7,
+ .vsync_len = 4,
+};
+
+static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
+ .displays = &smdk2440_lcd_cfg,
+ .num_displays = 1,
+ .default_display = 0,
+
+#if 0
+ /* currently setup by downloader */
+ .gpccon = 0xaa940659,
+ .gpccon_mask = 0xffffffff,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+ .gpdcon = 0xaa84aaa0,
+ .gpdcon_mask = 0xffffffff,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+
+ .gpccon_reg = S3C2410_GPCCON,
+ .gpcup_reg = S3C2410_GPCUP,
+ .gpdcon_reg = S3C2410_GPDCON,
+ .gpdup_reg = S3C2410_GPDUP,
+#endif
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+};
+
+static struct platform_device *smdk2440_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+};
+
+static void __init smdk2440_map_io(void)
+{
+ s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
+ s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init smdk2440_init_time(void)
+{
+ s3c2440_init_clocks(16934400);
+ samsung_timer_init();
+}
+
+static void __init smdk2440_machine_init(void)
+{
+ s3c24xx_fb_set_platdata(&smdk2440_fb_info);
+ s3c_i2c0_set_platdata(NULL);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+ platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
+ smdk_machine_init();
+}
+
+MACHINE_START(S3C2440, "SMDK2440")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+
+ .init_irq = s3c2440_init_irq,
+ .map_io = smdk2440_map_io,
+ .init_machine = smdk2440_machine_init,
+ .init_time = smdk2440_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2007 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// http://www.fluff.org/ben/smdk2443/
+//
+// Thanks to Samsung for the loan of an SMDK2443
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
+
+static struct map_desc smdk2443_iodesc[] __initdata = {
+ /* ISA IO Space map (memory space selected by A24) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ }
+};
+
+static struct platform_device *smdk2443_devices[] __initdata = {
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_hsmmc1,
+ &s3c2443_device_dma,
+};
+
+static void __init smdk2443_map_io(void)
+{
+ s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
+ s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init smdk2443_init_time(void)
+{
+ s3c2443_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void __init smdk2443_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
+ smdk_machine_init();
+}
+
+MACHINE_START(SMDK2443, "SMDK2443")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+
+ .init_irq = s3c2443_init_irq,
+ .map_io = smdk2443_map_io,
+ .init_machine = smdk2443_machine_init,
+ .init_time = smdk2443_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/gpio-samsung.h>
+
+#include "s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+};
+
+static struct map_desc smdk6400_iodesc[] = {};
+
+static void __init smdk6400_map_io(void)
+{
+ s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
+ s3c64xx_set_xtal_freq(12000000);
+ s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static struct platform_device *smdk6400_devices[] __initdata = {
+ &s3c_device_hsmmc1,
+ &s3c_device_i2c0,
+};
+
+static struct i2c_board_info i2c_devs[] __initdata = {
+ { I2C_BOARD_INFO("wm8753", 0x1A), },
+ { I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static void __init smdk6400_machine_init(void)
+{
+ i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
+ platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
+}
+
+MACHINE_START(SMDK6400, "SMDK6400")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
+ .init_irq = s3c6400_init_irq,
+ .map_io = smdk6400_map_io,
+ .init_machine = smdk6400_machine_init,
+ .init_time = samsung_timer_init,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#endif
+
+#include <video/platform_lcd.h>
+#include <video/samsung_fimd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <linux/soc/samsung/s3c-adc.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <plat/keypad.h>
+
+#include "backlight-s3c64xx.h"
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-srom-s3c64xx.h"
+#include "regs-sys-s3c64xx.h"
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+/* framebuffer and LCD setup. */
+
+/* GPF15 = LCD backlight control
+ * GPF13 => Panel power
+ * GPN5 = LCD nRESET signal
+ * PWM_TOUT1 => backlight brightness
+ */
+
+static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+ gpio_direction_output(S3C64XX_GPF(13), 1);
+
+ /* fire nRESET on power up */
+ gpio_direction_output(S3C64XX_GPN(5), 0);
+ msleep(10);
+ gpio_direction_output(S3C64XX_GPN(5), 1);
+ msleep(1);
+ } else {
+ gpio_direction_output(S3C64XX_GPF(13), 0);
+ }
+}
+
+static struct plat_lcd_data smdk6410_lcd_power_data = {
+ .set_power = smdk6410_lcd_power_set,
+};
+
+static struct platform_device smdk6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdk6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win smdk6410_fb_win0 = {
+ .max_bpp = 32,
+ .default_bpp = 16,
+ .xres = 800,
+ .yres = 480,
+ .virtual_y = 480 * 2,
+ .virtual_x = 800,
+};
+
+static struct fb_videomode smdk6410_lcd_timing = {
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .vtiming = &smdk6410_lcd_timing,
+ .win[0] = &smdk6410_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/*
+ * Configuring Ethernet on SMDK6410
+ *
+ * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
+ * The constant address below corresponds to nCS1
+ *
+ * 1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
+ * 2) CFG6 needs to be switched to "LAN9115" side
+ */
+
+static struct resource smdk6410_smsc911x_resources[] = {
+ [0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, SZ_64K),
+ [1] = DEFINE_RES_NAMED(S3C_EINT(10), 1, NULL, IORESOURCE_IRQ \
+ | IRQ_TYPE_LEVEL_LOW),
+};
+
+static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device smdk6410_smsc911x = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
+ .resource = &smdk6410_smsc911x_resources[0],
+ .dev = {
+ .platform_data = &smdk6410_smsc911x_pdata,
+ },
+};
+
+#ifdef CONFIG_REGULATOR
+static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
+ REGULATOR_SUPPLY("PVDD", "0-001b"),
+ REGULATOR_SUPPLY("AVDD", "0-001b"),
+};
+
+static struct regulator_init_data __maybe_unused smdk6410_b_pwr_5v_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
+ .consumer_supplies = smdk6410_b_pwr_5v_consumers,
+};
+
+static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
+ .supply_name = "B_PWR_5V",
+ .microvolts = 5000000,
+ .init_data = &smdk6410_b_pwr_5v_data,
+};
+
+static struct platform_device smdk6410_b_pwr_5v = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .dev = {
+ .platform_data = &smdk6410_b_pwr_5v_pdata,
+ },
+};
+#endif
+
+static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
+ .setup_gpio = s3c64xx_ide_setup_gpio,
+};
+
+static uint32_t smdk6410_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+ KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+ KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+ KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
+ .keymap = smdk6410_keymap,
+ .keymap_size = ARRAY_SIZE(smdk6410_keymap),
+};
+
+static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
+ .keymap_data = &smdk6410_keymap_data,
+ .rows = 2,
+ .cols = 8,
+};
+
+static struct map_desc smdk6410_iodesc[] = {};
+
+static struct platform_device *smdk6410_devices[] __initdata = {
+#ifdef CONFIG_SMDK6410_SD_CH0
+ &s3c_device_hsmmc0,
+#endif
+#ifdef CONFIG_SMDK6410_SD_CH1
+ &s3c_device_hsmmc1,
+#endif
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_fb,
+ &s3c_device_ohci,
+ &samsung_device_pwm,
+ &s3c_device_usb_hsotg,
+ &s3c64xx_device_iisv4,
+ &samsung_device_keypad,
+
+#ifdef CONFIG_REGULATOR
+ &smdk6410_b_pwr_5v,
+#endif
+ &smdk6410_lcd_powerdev,
+
+ &smdk6410_smsc911x,
+ &s3c_device_adc,
+ &s3c_device_cfcon,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+};
+
+#ifdef CONFIG_REGULATOR
+/* ARM core */
+static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
+ REGULATOR_SUPPLY("vddarm", NULL),
+};
+
+/* VDDARM, BUCK1 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddarm = {
+ .constraints = {
+ .name = "PVDD_ARM",
+ .min_uV = 1000000,
+ .max_uV = 1300000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
+ .consumer_supplies = smdk6410_vddarm_consumers,
+};
+
+/* VDD_INT, BUCK2 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddint = {
+ .constraints = {
+ .name = "PVDD_INT",
+ .min_uV = 1000000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+};
+
+/* VDD_HI, LDO3 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddhi = {
+ .constraints = {
+ .name = "PVDD_HI",
+ .always_on = 1,
+ },
+};
+
+/* VDD_PLL, LDO2 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddpll = {
+ .constraints = {
+ .name = "PVDD_PLL",
+ .always_on = 1,
+ },
+};
+
+/* VDD_UH_MMC, LDO5 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vdduh_mmc = {
+ .constraints = {
+ .name = "PVDD_UH+PVDD_MMC",
+ .always_on = 1,
+ },
+};
+
+/* VCCM3BT, LDO8 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vccmc3bt = {
+ .constraints = {
+ .name = "PVCCM3BT",
+ .always_on = 1,
+ },
+};
+
+/* VCCM2MTV, LDO11 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vccm2mtv = {
+ .constraints = {
+ .name = "PVCCM2MTV",
+ .always_on = 1,
+ },
+};
+
+/* VDD_LCD, LDO12 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddlcd = {
+ .constraints = {
+ .name = "PVDD_LCD",
+ .always_on = 1,
+ },
+};
+
+/* VDD_OTGI, LDO9 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddotgi = {
+ .constraints = {
+ .name = "PVDD_OTGI",
+ .always_on = 1,
+ },
+};
+
+/* VDD_OTG, LDO14 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddotg = {
+ .constraints = {
+ .name = "PVDD_OTG",
+ .always_on = 1,
+ },
+};
+
+/* VDD_ALIVE, LDO15 on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddalive = {
+ .constraints = {
+ .name = "PVDD_ALIVE",
+ .always_on = 1,
+ },
+};
+
+/* VDD_AUDIO, VLDO_AUDIO on J5 */
+static struct regulator_init_data __maybe_unused smdk6410_vddaudio = {
+ .constraints = {
+ .name = "PVDD_AUDIO",
+ .always_on = 1,
+ },
+};
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+/* S3C64xx internal logic & PLL */
+static struct regulator_init_data __maybe_unused wm8350_dcdc1_data = {
+ .constraints = {
+ .name = "PVDD_INT+PVDD_PLL",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+};
+
+/* Memory */
+static struct regulator_init_data __maybe_unused wm8350_dcdc3_data = {
+ .constraints = {
+ .name = "PVDD_MEM",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .always_on = 1,
+ .state_mem = {
+ .uV = 1800000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .initial_state = PM_SUSPEND_MEM,
+ },
+};
+
+/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
+ REGULATOR_SUPPLY("DVDD", "0-001b"),
+};
+
+static struct regulator_init_data __maybe_unused wm8350_dcdc4_data = {
+ .constraints = {
+ .name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
+ .consumer_supplies = wm8350_dcdc4_consumers,
+};
+
+/* OTGi/1190-EV1 HPVDD & AVDD */
+static struct regulator_init_data __maybe_unused wm8350_ldo4_data = {
+ .constraints = {
+ .name = "PVDD_OTGI+HPVDD+AVDD",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct {
+ int regulator;
+ struct regulator_init_data *initdata;
+} wm1190_regulators[] = {
+ { WM8350_DCDC_1, &wm8350_dcdc1_data },
+ { WM8350_DCDC_3, &wm8350_dcdc3_data },
+ { WM8350_DCDC_4, &wm8350_dcdc4_data },
+ { WM8350_DCDC_6, &smdk6410_vddarm },
+ { WM8350_LDO_1, &smdk6410_vddalive },
+ { WM8350_LDO_2, &smdk6410_vddotg },
+ { WM8350_LDO_3, &smdk6410_vddlcd },
+ { WM8350_LDO_4, &wm8350_ldo4_data },
+};
+
+static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
+{
+ int i;
+
+ /* Configure the IRQ line */
+ s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
+ /* Instantiate the regulators */
+ for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
+ wm8350_register_regulator(wm8350,
+ wm1190_regulators[i].regulator,
+ wm1190_regulators[i].initdata);
+
+ return 0;
+}
+
+static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
+ .init = smdk6410_wm8350_init,
+ .irq_high = 1,
+ .irq_base = IRQ_BOARD_START,
+};
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+static struct gpio_led wm1192_pmic_leds[] = {
+ {
+ .name = "PMIC:red:power",
+ .gpio = GPIO_BOARD_START + 3,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+};
+
+static struct gpio_led_platform_data wm1192_pmic_led = {
+ .num_leds = ARRAY_SIZE(wm1192_pmic_leds),
+ .leds = wm1192_pmic_leds,
+};
+
+static struct platform_device wm1192_pmic_led_dev = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &wm1192_pmic_led,
+ },
+};
+
+static int wm1192_pre_init(struct wm831x *wm831x)
+{
+ int ret;
+
+ /* Configure the IRQ line */
+ s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
+ ret = platform_device_register(&wm1192_pmic_led_dev);
+ if (ret != 0)
+ dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
+
+ return 0;
+}
+
+static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
+ .isink = 1,
+ .max_uA = 27554,
+};
+
+static struct regulator_init_data __maybe_unused wm1192_dcdc3 = {
+ .constraints = {
+ .name = "PVDD_MEM+PVDD_GPS",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
+ REGULATOR_SUPPLY("DVDD", "0-001b"), /* WM8580 */
+};
+
+static struct regulator_init_data __maybe_unused wm1192_ldo1 = {
+ .constraints = {
+ .name = "PVDD_LCD+PVDD_EXT",
+ .always_on = 1,
+ },
+ .consumer_supplies = wm1192_ldo1_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
+};
+
+static struct wm831x_status_pdata wm1192_led7_pdata = {
+ .name = "LED7:green:",
+};
+
+static struct wm831x_status_pdata wm1192_led8_pdata = {
+ .name = "LED8:green:",
+};
+
+static struct wm831x_pdata smdk6410_wm1192_pdata = {
+ .pre_init = wm1192_pre_init,
+
+ .backlight = &wm1192_backlight_pdata,
+ .dcdc = {
+ &smdk6410_vddarm, /* DCDC1 */
+ &smdk6410_vddint, /* DCDC2 */
+ &wm1192_dcdc3,
+ },
+ .gpio_base = GPIO_BOARD_START,
+ .ldo = {
+ &wm1192_ldo1, /* LDO1 */
+ &smdk6410_vdduh_mmc, /* LDO2 */
+ NULL, /* LDO3 NC */
+ &smdk6410_vddotgi, /* LDO4 */
+ &smdk6410_vddotg, /* LDO5 */
+ &smdk6410_vddhi, /* LDO6 */
+ &smdk6410_vddaudio, /* LDO7 */
+ &smdk6410_vccm2mtv, /* LDO8 */
+ &smdk6410_vddpll, /* LDO9 */
+ &smdk6410_vccmc3bt, /* LDO10 */
+ &smdk6410_vddalive, /* LDO11 */
+ },
+ .status = {
+ &wm1192_led7_pdata,
+ &wm1192_led8_pdata,
+ },
+};
+#endif
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+ { I2C_BOARD_INFO("24c08", 0x50), },
+ { I2C_BOARD_INFO("wm8580", 0x1b), },
+
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+ { I2C_BOARD_INFO("wm8312", 0x34),
+ .platform_data = &smdk6410_wm1192_pdata,
+ .irq = S3C_EINT(12),
+ },
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+ { I2C_BOARD_INFO("wm8350", 0x1a),
+ .platform_data = &smdk6410_wm8350_pdata,
+ .irq = S3C_EINT(12),
+ },
+#endif
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+ { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */
+};
+
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
+ .no = S3C64XX_GPF(15),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct pwm_lookup smdk6410_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, 78770,
+ PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data smdk6410_bl_data = {
+ /* Intentionally blank */
+};
+
+static struct dwc2_hsotg_plat smdk6410_hsotg_pdata;
+
+static void __init smdk6410_map_io(void)
+{
+ u32 tmp;
+
+ s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
+ s3c64xx_set_xtal_freq(12000000);
+ s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+
+ /* set the LCD type */
+
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the lcd bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+static void __init smdk6410_machine_init(void)
+{
+ u32 cs1;
+
+ s3c_i2c0_set_platdata(NULL);
+ s3c_i2c1_set_platdata(NULL);
+ s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+ dwc2_hsotg_set_platdata(&smdk6410_hsotg_pdata);
+
+ samsung_keypad_set_platdata(&smdk6410_keypad_data);
+
+ s3c64xx_ts_set_platdata(NULL);
+
+ /* configure nCS1 width to 16 bits */
+
+ cs1 = __raw_readl(S3C64XX_SROM_BW) &
+ ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S3C64XX_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S3C64XX_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+
+ __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+ (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+ (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+ (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+ (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+ gpio_request(S3C64XX_GPN(5), "LCD power");
+ gpio_request(S3C64XX_GPF(13), "LCD power");
+
+ i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+ s3c_ide_set_platdata(&smdk6410_ide_pdata);
+
+ platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
+
+ pwm_add_table(smdk6410_pwm_lookup, ARRAY_SIZE(smdk6410_pwm_lookup));
+ samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
+}
+
+MACHINE_START(SMDK6410, "SMDK6410")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
+ .init_irq = s3c6410_init_irq,
+ .map_io = smdk6410_map_io,
+ .init_machine = smdk6410_machine_init,
+ .init_time = samsung_timer_init,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2007 TinCanTools
+// David Anders <danders@amltd.com>
+//
+// @History:
+// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
+// Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/gpio/machine.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+
+#include "s3c24xx.h"
+
+static struct resource tct_hammer_nor_resource =
+ DEFINE_RES_MEM(0x00000000, SZ_16M);
+
+static struct mtd_partition tct_hammer_mtd_partitions[] = {
+ {
+ .name = "System",
+ .size = 0x240000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "JFFS2",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct physmap_flash_data tct_hammer_flash_data = {
+ .width = 2,
+ .parts = tct_hammer_mtd_partitions,
+ .nr_parts = ARRAY_SIZE(tct_hammer_mtd_partitions),
+};
+
+static struct platform_device tct_hammer_device_nor = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &tct_hammer_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &tct_hammer_nor_resource,
+};
+
+static struct map_desc tct_hammer_iodesc[] __initdata = {
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+static struct gpiod_lookup_table tct_hammer_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct platform_device *tct_hammer_devices[] __initdata = {
+ &s3c_device_adc,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_ohci,
+ &s3c_device_rtc,
+ &s3c_device_usbgadget,
+ &s3c_device_sdi,
+ &tct_hammer_device_nor,
+};
+
+static void __init tct_hammer_map_io(void)
+{
+ s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
+ s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init tct_hammer_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void __init tct_hammer_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ gpiod_add_lookup_table(&tct_hammer_mmc_gpio_table);
+ platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
+}
+
+MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
+ .atag_offset = 0x100,
+ .map_io = tct_hammer_map_io,
+ .init_irq = s3c2410_init_irq,
+ .init_machine = tct_hammer_init,
+ .init_time = tct_hammer_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2003-2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// Machine support for Thorcom VR1000 board. Designed for Thorcom by
+// Simtec Electronics, http://www.simtec.co.uk/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/dm9000.h>
+#include <linux/i2c.h>
+
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_s3c.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+
+#include "bast.h"
+#include "s3c24xx.h"
+#include "simtec.h"
+#include "vr1000.h"
+
+/* macros for virtual address mods for the io space entries */
+#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
+#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
+#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
+#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
+
+/* macros to modify the physical addresses for io space */
+
+#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
+#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
+#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
+#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
+
+static struct map_desc vr1000_iodesc[] __initdata = {
+ /* ISA IO areas */
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = PA_CS2(BAST_PA_ISAIO),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = PA_CS3(BAST_PA_ISAIO),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ },
+
+ /* CPLD control registers, and external interrupt controls */
+ {
+ .virtual = (u32)VR1000_VA_CTRL1,
+ .pfn = __phys_to_pfn(VR1000_PA_CTRL1),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)VR1000_VA_CTRL2,
+ .pfn = __phys_to_pfn(VR1000_PA_CTRL2),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)VR1000_VA_CTRL3,
+ .pfn = __phys_to_pfn(VR1000_PA_CTRL3),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)VR1000_VA_CTRL4,
+ .pfn = __phys_to_pfn(VR1000_PA_CTRL4),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ /* port 2 is not actually used */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* definitions for the vr1000 extra 16550 serial ports */
+
+#define VR1000_BAUDBASE (3692307)
+
+#define VR1000_SERIAL_MAPBASE(x) (VR1000_PA_SERIAL + 0x80 + ((x) << 5))
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ [0] = {
+ .mapbase = VR1000_SERIAL_MAPBASE(0),
+ .irq = VR1000_IRQ_SERIAL + 0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = VR1000_BAUDBASE,
+ },
+ [1] = {
+ .mapbase = VR1000_SERIAL_MAPBASE(1),
+ .irq = VR1000_IRQ_SERIAL + 1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = VR1000_BAUDBASE,
+ },
+ [2] = {
+ .mapbase = VR1000_SERIAL_MAPBASE(2),
+ .irq = VR1000_IRQ_SERIAL + 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = VR1000_BAUDBASE,
+ },
+ [3] = {
+ .mapbase = VR1000_SERIAL_MAPBASE(3),
+ .irq = VR1000_IRQ_SERIAL + 3,
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = VR1000_BAUDBASE,
+ },
+ { },
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
+/* DM9000 ethernet devices */
+
+static struct resource vr1000_dm9k0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4),
+ [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40),
+ [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000A, 1, NULL, IORESOURCE_IRQ \
+ | IORESOURCE_IRQ_HIGHLEVEL),
+};
+
+static struct resource vr1000_dm9k1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4),
+ [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40),
+ [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000N, 1, NULL, IORESOURCE_IRQ \
+ | IORESOURCE_IRQ_HIGHLEVEL),
+};
+
+/* for the moment we limit ourselves to 16bit IO until some
+ * better IO routines can be written and tested
+*/
+
+static struct dm9000_plat_data vr1000_dm9k_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device vr1000_dm9k0 = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(vr1000_dm9k0_resource),
+ .resource = vr1000_dm9k0_resource,
+ .dev = {
+ .platform_data = &vr1000_dm9k_platdata,
+ }
+};
+
+static struct platform_device vr1000_dm9k1 = {
+ .name = "dm9000",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(vr1000_dm9k1_resource),
+ .resource = vr1000_dm9k1_resource,
+ .dev = {
+ .platform_data = &vr1000_dm9k_platdata,
+ }
+};
+
+/* LEDS */
+
+static struct gpiod_lookup_table vr1000_led1_gpio_table = {
+ .dev_id = "s3c24xx_led.1",
+ .table = {
+ GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table vr1000_led2_gpio_table = {
+ .dev_id = "s3c24xx_led.2",
+ .table = {
+ GPIO_LOOKUP("GPB", 1, NULL, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table vr1000_led3_gpio_table = {
+ .dev_id = "s3c24xx_led.3",
+ .table = {
+ GPIO_LOOKUP("GPB", 2, NULL, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct s3c24xx_led_platdata vr1000_led1_pdata = {
+ .name = "led1",
+ .def_trigger = "",
+};
+
+static struct s3c24xx_led_platdata vr1000_led2_pdata = {
+ .name = "led2",
+ .def_trigger = "",
+};
+
+static struct s3c24xx_led_platdata vr1000_led3_pdata = {
+ .name = "led3",
+ .def_trigger = "",
+};
+
+static struct platform_device vr1000_led1 = {
+ .name = "s3c24xx_led",
+ .id = 1,
+ .dev = {
+ .platform_data = &vr1000_led1_pdata,
+ },
+};
+
+static struct platform_device vr1000_led2 = {
+ .name = "s3c24xx_led",
+ .id = 2,
+ .dev = {
+ .platform_data = &vr1000_led2_pdata,
+ },
+};
+
+static struct platform_device vr1000_led3 = {
+ .name = "s3c24xx_led",
+ .id = 3,
+ .dev = {
+ .platform_data = &vr1000_led3_pdata,
+ },
+};
+
+/* I2C devices. */
+
+static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ }, {
+ I2C_BOARD_INFO("tmp101", 0x48),
+ }, {
+ I2C_BOARD_INFO("m41st87", 0x68),
+ },
+};
+
+/* devices for this board */
+
+static struct platform_device *vr1000_devices[] __initdata = {
+ &s3c2410_device_dclk,
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_adc,
+ &serial_device,
+ &vr1000_dm9k0,
+ &vr1000_dm9k1,
+ &vr1000_led1,
+ &vr1000_led2,
+ &vr1000_led3,
+};
+
+static void vr1000_power_off(void)
+{
+ gpio_direction_output(S3C2410_GPB(9), 1);
+}
+
+static void __init vr1000_map_io(void)
+{
+ pm_power_off = vr1000_power_off;
+
+ s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
+ s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init vr1000_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void __init vr1000_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+
+ /* Disable pull-up on LED lines and register GPIO lookups */
+ s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPB(2), S3C_GPIO_PULL_NONE);
+ gpiod_add_lookup_table(&vr1000_led1_gpio_table);
+ gpiod_add_lookup_table(&vr1000_led2_gpio_table);
+ gpiod_add_lookup_table(&vr1000_led3_gpio_table);
+
+ platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
+
+ i2c_register_board_info(0, vr1000_i2c_devs,
+ ARRAY_SIZE(vr1000_i2c_devs));
+
+ nor_simtec_init();
+ simtec_audio_add(NULL, true, NULL);
+
+ WARN_ON(gpio_request(S3C2410_GPB(9), "power off"));
+}
+
+MACHINE_START(VR1000, "Thorcom-VR1000")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .atag_offset = 0x100,
+ .map_io = vr1000_map_io,
+ .init_machine = vr1000_init,
+ .init_irq = s3c2410_init_irq,
+ .init_time = vr1000_init_time,
+MACHINE_END
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// (C) 2006 Thomas Gleixner <tglx@linutronix.de>
+//
+// Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/memblock.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <plat/gpio-cfg.h>
+
+#include <linux/platform_data/fb-s3c2410.h>
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "s3c24xx.h"
+
+static struct map_desc vstms_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ }
+};
+
+static struct mtd_partition __initdata vstms_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = 0x7C000,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "UBoot Config",
+ .offset = 0x7C000,
+ .size = 0x4000,
+ },
+ [2] = {
+ .name = "Kernel",
+ .offset = 0x80000,
+ .size = 0x200000,
+ },
+ [3] = {
+ .name = "RFS",
+ .offset = 0x280000,
+ .size = 0x3d80000,
+ },
+};
+
+static struct s3c2410_nand_set __initdata vstms_nand_sets[] = {
+ [0] = {
+ .name = "NAND",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(vstms_nand_part),
+ .partitions = vstms_nand_part,
+ },
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+*/
+
+static struct s3c2410_platform_nand __initdata vstms_nand_info = {
+ .tacls = 20,
+ .twrph0 = 60,
+ .twrph1 = 20,
+ .nr_sets = ARRAY_SIZE(vstms_nand_sets),
+ .sets = vstms_nand_sets,
+ .ecc_mode = NAND_ECC_SOFT,
+};
+
+static struct platform_device *vstms_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &s3c2412_device_dma,
+};
+
+static void __init vstms_fixup(struct tag *tags, char **cmdline)
+{
+ if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
+ memblock_add(0x30000000, SZ_64M);
+ }
+}
+
+static void __init vstms_map_io(void)
+{
+ s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
+ s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init vstms_init_time(void)
+{
+ s3c2412_init_clocks(12000000);
+ samsung_timer_init();
+}
+
+static void __init vstms_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&vstms_nand_info);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+ platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
+}
+
+MACHINE_START(VSTMS, "VSTMS")
+ .atag_offset = 0x100,
+
+ .fixup = vstms_fixup,
+ .init_irq = s3c2412_init_irq,
+ .init_machine = vstms_init,
+ .map_io = vstms_map_io,
+ .init_time = vstms_init_time,
+MACHINE_END
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S3C - Nand Controller core functions
+ */
+
+#ifndef __ASM_ARCH_NAND_CORE_S3C24XX_H
+#define __ASM_ARCH_NAND_CORE_S3C24XX_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_nand_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_NAND
+ s3c_device_nand.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_NAND_CORE_S3C24XX_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Samsung OneNAD Controller core functions
+ */
+
+#ifndef __ASM_ARCH_ONENAND_CORE_S3C64XX_H
+#define __ASM_ARCH_ONENAND_CORE_S3C64XX_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_onenand_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_ONENAND
+ s3c_device_onenand.name = name;
+#endif
+}
+
+static inline void s3c64xx_onenand1_setname(char *name)
+{
+#ifdef CONFIG_S3C64XX_DEV_ONENAND1
+ s3c64xx_device_onenand1.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_ONENAND_CORE_S3C64XX_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - CPLD control constants
+ * OSIRIS - Memory map definitions
+ */
+
+#ifndef __MACH_S3C24XX_OSIRIS_H
+#define __MACH_S3C24XX_OSIRIS_H __FILE__
+
+/* CTRL0 - NAND WP control */
+
+#define OSIRIS_CTRL0_NANDSEL (0x3)
+#define OSIRIS_CTRL0_BOOT_INT (1<<3)
+#define OSIRIS_CTRL0_PCMCIA (1<<4)
+#define OSIRIS_CTRL0_FIX8 (1<<5)
+#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6)
+#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7)
+
+#define OSIRIS_CTRL1_FIX8 (1<<0)
+
+#define OSIRIS_ID_REVMASK (0x7)
+
+/* start peripherals off after the S3C2410 */
+
+#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x04000000))
+
+#define OSIRIS_PA_CPLD (S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define OSIRIS_VA_CTRL0 OSIRIS_IOADDR(0x00000000)
+#define OSIRIS_PA_CTRL0 (OSIRIS_PA_CPLD)
+
+#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00100000)
+#define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD + (1<<23))
+
+#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00200000)
+#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (2<<23))
+
+#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00300000)
+#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<23))
+
+#define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000)
+#define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23))
+
+#endif /* __MACH_S3C24XX_OSIRIS_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (c) 2005 Guillaume GOURAT / NexVision
+ * guillaume.gourat@nexvision.fr
+ *
+ * NexVision OTOM board memory map definitions
+ */
+
+/*
+ * ok, we've used up to 0x01300000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space.
+ */
+
+#ifndef __MACH_S3C24XX_OTOM_H
+#define __MACH_S3C24XX_OTOM_H __FILE__
+
+#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */
+#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */
+
+/* physical offset addresses for the peripherals */
+
+#define OTOM_PA_FLASH0_BASE (S3C2410_CS0)
+
+#endif /* __MACH_S3C24XX_OTOM_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Samsung's S3C64XX generic DMA support using amba-pl08x driver.
+//
+// Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+
+#include <linux/kernel.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl080.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of.h>
+
+#include <plat/cpu.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include "regs-sys-s3c64xx.h"
+
+static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd)
+{
+ return cd->min_signal;
+}
+
+static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch)
+{
+}
+
+/*
+ * DMA0
+ */
+
+static struct pl08x_channel_data s3c64xx_dma0_info[] = {
+ {
+ .bus_id = "uart0_tx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart0_rx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart1_tx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart1_rx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart2_tx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart2_rx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart3_tx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart3_rx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pcm0_tx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pcm0_rx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s0_tx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s0_rx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi0_tx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi0_rx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s2_tx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s2_rx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .periph_buses = PL08X_AHB2,
+ }
+};
+
+static const struct dma_slave_map s3c64xx_dma0_slave_map[] = {
+ { "s3c6400-uart.0", "tx", &s3c64xx_dma0_info[0] },
+ { "s3c6400-uart.0", "rx", &s3c64xx_dma0_info[1] },
+ { "s3c6400-uart.1", "tx", &s3c64xx_dma0_info[2] },
+ { "s3c6400-uart.1", "rx", &s3c64xx_dma0_info[3] },
+ { "s3c6400-uart.2", "tx", &s3c64xx_dma0_info[4] },
+ { "s3c6400-uart.2", "rx", &s3c64xx_dma0_info[5] },
+ { "s3c6400-uart.3", "tx", &s3c64xx_dma0_info[6] },
+ { "s3c6400-uart.3", "rx", &s3c64xx_dma0_info[7] },
+ { "samsung-pcm.0", "tx", &s3c64xx_dma0_info[8] },
+ { "samsung-pcm.0", "rx", &s3c64xx_dma0_info[9] },
+ { "samsung-i2s.0", "tx", &s3c64xx_dma0_info[10] },
+ { "samsung-i2s.0", "rx", &s3c64xx_dma0_info[11] },
+ { "s3c6410-spi.0", "tx", &s3c64xx_dma0_info[12] },
+ { "s3c6410-spi.0", "rx", &s3c64xx_dma0_info[13] },
+ { "samsung-i2s.2", "tx", &s3c64xx_dma0_info[14] },
+ { "samsung-i2s.2", "rx", &s3c64xx_dma0_info[15] },
+};
+
+struct pl08x_platform_data s3c64xx_dma0_plat_data = {
+ .memcpy_burst_size = PL08X_BURST_SZ_4,
+ .memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+ .memcpy_prot_buff = true,
+ .memcpy_prot_cache = true,
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+ .get_xfer_signal = pl08x_get_xfer_signal,
+ .put_xfer_signal = pl08x_put_xfer_signal,
+ .slave_channels = s3c64xx_dma0_info,
+ .num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info),
+ .slave_map = s3c64xx_dma0_slave_map,
+ .slave_map_len = ARRAY_SIZE(s3c64xx_dma0_slave_map),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0,
+ 0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data);
+
+/*
+ * DMA1
+ */
+
+static struct pl08x_channel_data s3c64xx_dma1_info[] = {
+ {
+ .bus_id = "pcm1_tx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pcm1_rx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s1_tx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s1_rx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi1_tx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi1_rx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ac97_out",
+ .min_signal = 6,
+ .max_signal = 6,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ac97_in",
+ .min_signal = 7,
+ .max_signal = 7,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ac97_mic",
+ .min_signal = 8,
+ .max_signal = 8,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pwm",
+ .min_signal = 9,
+ .max_signal = 9,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "irda",
+ .min_signal = 10,
+ .max_signal = 10,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "external",
+ .min_signal = 11,
+ .max_signal = 11,
+ .periph_buses = PL08X_AHB2,
+ },
+};
+
+static const struct dma_slave_map s3c64xx_dma1_slave_map[] = {
+ { "samsung-pcm.1", "tx", &s3c64xx_dma1_info[0] },
+ { "samsung-pcm.1", "rx", &s3c64xx_dma1_info[1] },
+ { "samsung-i2s.1", "tx", &s3c64xx_dma1_info[2] },
+ { "samsung-i2s.1", "rx", &s3c64xx_dma1_info[3] },
+ { "s3c6410-spi.1", "tx", &s3c64xx_dma1_info[4] },
+ { "s3c6410-spi.1", "rx", &s3c64xx_dma1_info[5] },
+};
+
+struct pl08x_platform_data s3c64xx_dma1_plat_data = {
+ .memcpy_burst_size = PL08X_BURST_SZ_4,
+ .memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+ .memcpy_prot_buff = true,
+ .memcpy_prot_cache = true,
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+ .get_xfer_signal = pl08x_get_xfer_signal,
+ .put_xfer_signal = pl08x_put_xfer_signal,
+ .slave_channels = s3c64xx_dma1_info,
+ .num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info),
+ .slave_map = s3c64xx_dma1_slave_map,
+ .slave_map_len = ARRAY_SIZE(s3c64xx_dma1_slave_map),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
+ 0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data);
+
+static int __init s3c64xx_pl080_init(void)
+{
+ if (!soc_is_s3c64xx())
+ return 0;
+
+ /* Set all DMA configuration to be DMA, not SDMA */
+ writel(0xffffff, S3C64XX_SDMA_SEL);
+
+ if (of_have_populated_dt())
+ return 0;
+
+ amba_device_register(&s3c64xx_dma0_device, &iomem_resource);
+ amba_device_register(&s3c64xx_dma1_device, &iomem_resource);
+
+ return 0;
+}
+arch_initcall(s3c64xx_pl080_init);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2010 Ben Dooks <ben-linux <at> fluff.org>
+//
+// Helper for platform data setting
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+
+void __init *s3c_set_platdata(void *pd, size_t pdsize,
+ struct platform_device *pdev)
+{
+ void *npd;
+
+ if (!pd) {
+ /* too early to use dev_name(), may not be registered */
+ printk(KERN_ERR "%s: no platform data supplied\n", pdev->name);
+ return NULL;
+ }
+
+ npd = kmemdup(pd, pdsize, GFP_KERNEL);
+ if (!npd)
+ return NULL;
+
+ pdev->dev.platform_data = npd;
+ return npd;
+}
+
+void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+ struct s3c_sdhci_platdata *set)
+{
+ set->cd_type = pd->cd_type;
+ set->ext_cd_init = pd->ext_cd_init;
+ set->ext_cd_cleanup = pd->ext_cd_cleanup;
+ set->ext_cd_gpio = pd->ext_cd_gpio;
+ set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+
+ if (pd->max_width)
+ set->max_width = pd->max_width;
+ if (pd->cfg_gpio)
+ set->cfg_gpio = pd->cfg_gpio;
+ if (pd->host_caps)
+ set->host_caps |= pd->host_caps;
+ if (pd->host_caps2)
+ set->host_caps2 |= pd->host_caps2;
+ if (pd->pm_caps)
+ set->pm_caps |= pd->pm_caps;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2006-2007 Simtec Electronics
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>
+// Vincent Sanders <vince@arm.linux.org.uk>
+//
+// S3C2410 CPU PLL tables
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
+
+/* This array should be sorted in ascending order of the frequencies */
+static struct cpufreq_frequency_table pll_vals_12MHz[] = {
+ { .frequency = 34000000, .driver_data = PLLVAL(82, 2, 3), },
+ { .frequency = 45000000, .driver_data = PLLVAL(82, 1, 3), },
+ { .frequency = 48000000, .driver_data = PLLVAL(120, 2, 3), },
+ { .frequency = 51000000, .driver_data = PLLVAL(161, 3, 3), },
+ { .frequency = 56000000, .driver_data = PLLVAL(142, 2, 3), },
+ { .frequency = 68000000, .driver_data = PLLVAL(82, 2, 2), },
+ { .frequency = 79000000, .driver_data = PLLVAL(71, 1, 2), },
+ { .frequency = 85000000, .driver_data = PLLVAL(105, 2, 2), },
+ { .frequency = 90000000, .driver_data = PLLVAL(112, 2, 2), },
+ { .frequency = 101000000, .driver_data = PLLVAL(127, 2, 2), },
+ { .frequency = 113000000, .driver_data = PLLVAL(105, 1, 2), },
+ { .frequency = 118000000, .driver_data = PLLVAL(150, 2, 2), },
+ { .frequency = 124000000, .driver_data = PLLVAL(116, 1, 2), },
+ { .frequency = 135000000, .driver_data = PLLVAL(82, 2, 1), },
+ { .frequency = 147000000, .driver_data = PLLVAL(90, 2, 1), },
+ { .frequency = 152000000, .driver_data = PLLVAL(68, 1, 1), },
+ { .frequency = 158000000, .driver_data = PLLVAL(71, 1, 1), },
+ { .frequency = 170000000, .driver_data = PLLVAL(77, 1, 1), },
+ { .frequency = 180000000, .driver_data = PLLVAL(82, 1, 1), },
+ { .frequency = 186000000, .driver_data = PLLVAL(85, 1, 1), },
+ { .frequency = 192000000, .driver_data = PLLVAL(88, 1, 1), },
+ { .frequency = 203000000, .driver_data = PLLVAL(161, 3, 1), },
+
+ /* 2410A extras */
+
+ { .frequency = 210000000, .driver_data = PLLVAL(132, 2, 1), },
+ { .frequency = 226000000, .driver_data = PLLVAL(105, 1, 1), },
+ { .frequency = 266000000, .driver_data = PLLVAL(125, 1, 1), },
+ { .frequency = 268000000, .driver_data = PLLVAL(126, 1, 1), },
+ { .frequency = 270000000, .driver_data = PLLVAL(127, 1, 1), },
+};
+
+static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
+{
+ return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
+}
+
+static struct subsys_interface s3c2410_plls_interface = {
+ .name = "s3c2410_plls",
+ .subsys = &s3c2410_subsys,
+ .add_dev = s3c2410_plls_add,
+};
+
+static int __init s3c2410_pll_init(void)
+{
+ return subsys_interface_register(&s3c2410_plls_interface);
+
+}
+arch_initcall(s3c2410_pll_init);
+
+static struct subsys_interface s3c2410a_plls_interface = {
+ .name = "s3c2410a_plls",
+ .subsys = &s3c2410a_subsys,
+ .add_dev = s3c2410_plls_add,
+};
+
+static int __init s3c2410a_pll_init(void)
+{
+ return subsys_interface_register(&s3c2410a_plls_interface);
+}
+arch_initcall(s3c2410a_pll_init);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006-2007 Simtec Electronics
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>
+// Vincent Sanders <vince@arm.linux.org.uk>
+//
+// S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
+
+/* This array should be sorted in ascending order of the frequencies */
+static struct cpufreq_frequency_table s3c2440_plls_12[] = {
+ { .frequency = 75000000, .driver_data = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */
+ { .frequency = 80000000, .driver_data = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */
+ { .frequency = 90000000, .driver_data = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */
+ { .frequency = 100000000, .driver_data = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */
+ { .frequency = 110000000, .driver_data = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */
+ { .frequency = 120000000, .driver_data = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */
+ { .frequency = 150000000, .driver_data = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */
+ { .frequency = 160000000, .driver_data = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */
+ { .frequency = 170000000, .driver_data = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */
+ { .frequency = 180000000, .driver_data = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */
+ { .frequency = 190000000, .driver_data = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */
+ { .frequency = 200000000, .driver_data = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */
+ { .frequency = 210000000, .driver_data = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */
+ { .frequency = 220000000, .driver_data = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */
+ { .frequency = 230000000, .driver_data = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */
+ { .frequency = 240000000, .driver_data = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */
+ { .frequency = 300000000, .driver_data = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */
+ { .frequency = 310000000, .driver_data = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */
+ { .frequency = 320000000, .driver_data = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */
+ { .frequency = 330000000, .driver_data = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */
+ { .frequency = 340000000, .driver_data = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */
+ { .frequency = 350000000, .driver_data = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */
+ { .frequency = 360000000, .driver_data = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */
+ { .frequency = 370000000, .driver_data = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */
+ { .frequency = 380000000, .driver_data = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */
+ { .frequency = 390000000, .driver_data = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */
+ { .frequency = 400000000, .driver_data = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal_clk))
+ return PTR_ERR(xtal_clk);
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ if (xtal == 12000000) {
+ printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+ return s3c_plltab_register(s3c2440_plls_12,
+ ARRAY_SIZE(s3c2440_plls_12));
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_plls12_interface = {
+ .name = "s3c2440_plls12",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+ return subsys_interface_register(&s3c2440_plls12_interface);
+
+}
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct subsys_interface s3c2442_plls12_interface = {
+ .name = "s3c2442_plls12",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+ return subsys_interface_register(&s3c2442_plls12_interface);
+
+}
+arch_initcall(s3c2442_pll_12mhz);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006-2008 Simtec Electronics
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>
+// Vincent Sanders <vince@arm.linux.org.uk>
+//
+// S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
+
+/* This array should be sorted in ascending order of the frequencies */
+static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
+ { .frequency = 78019200, .driver_data = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */
+ { .frequency = 84067200, .driver_data = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */
+ { .frequency = 90115200, .driver_data = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */
+ { .frequency = 96163200, .driver_data = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */
+ { .frequency = 102135600, .driver_data = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */
+ { .frequency = 108259200, .driver_data = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */
+ { .frequency = 114307200, .driver_data = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */
+ { .frequency = 120234240, .driver_data = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */
+ { .frequency = 126161280, .driver_data = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */
+ { .frequency = 132088320, .driver_data = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */
+ { .frequency = 138015360, .driver_data = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */
+ { .frequency = 144789120, .driver_data = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */
+ { .frequency = 150100363, .driver_data = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */
+ { .frequency = 156038400, .driver_data = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */
+ { .frequency = 162086400, .driver_data = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */
+ { .frequency = 168134400, .driver_data = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */
+ { .frequency = 174048000, .driver_data = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */
+ { .frequency = 180230400, .driver_data = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */
+ { .frequency = 186278400, .driver_data = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */
+ { .frequency = 192326400, .driver_data = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */
+ { .frequency = 198132480, .driver_data = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */
+ { .frequency = 204271200, .driver_data = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */
+ { .frequency = 210268800, .driver_data = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */
+ { .frequency = 216518400, .driver_data = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */
+ { .frequency = 222264000, .driver_data = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */
+ { .frequency = 228614400, .driver_data = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */
+ { .frequency = 234259200, .driver_data = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */
+ { .frequency = 240468480, .driver_data = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */
+ { .frequency = 246960000, .driver_data = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */
+ { .frequency = 252322560, .driver_data = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */
+ { .frequency = 258249600, .driver_data = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */
+ { .frequency = 264176640, .driver_data = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */
+ { .frequency = 270950400, .driver_data = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */
+ { .frequency = 276030720, .driver_data = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */
+ { .frequency = 282240000, .driver_data = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */
+ { .frequency = 289578240, .driver_data = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */
+ { .frequency = 294235200, .driver_data = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */
+ { .frequency = 300200727, .driver_data = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */
+ { .frequency = 306358690, .driver_data = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */
+ { .frequency = 312076800, .driver_data = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */
+ { .frequency = 318366720, .driver_data = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */
+ { .frequency = 324172800, .driver_data = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */
+ { .frequency = 330220800, .driver_data = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */
+ { .frequency = 336268800, .driver_data = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */
+ { .frequency = 342074880, .driver_data = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */
+ { .frequency = 348096000, .driver_data = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */
+ { .frequency = 355622400, .driver_data = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */
+ { .frequency = 360460800, .driver_data = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */
+ { .frequency = 366206400, .driver_data = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */
+ { .frequency = 372556800, .driver_data = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */
+ { .frequency = 378201600, .driver_data = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */
+ { .frequency = 384652800, .driver_data = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */
+ { .frequency = 391608000, .driver_data = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */
+ { .frequency = 396264960, .driver_data = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */
+ { .frequency = 402192000, .driver_data = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct device *dev,
+ struct subsys_interface *sif)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal_clk))
+ return PTR_ERR(xtal_clk);
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ if (xtal == 169344000) {
+ printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+ return s3c_plltab_register(s3c2440_plls_169344,
+ ARRAY_SIZE(s3c2440_plls_169344));
+ }
+
+ return 0;
+}
+
+static struct subsys_interface s3c2440_plls169344_interface = {
+ .name = "s3c2440_plls169344",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+ return subsys_interface_register(&s3c2440_plls169344_interface);
+}
+arch_initcall(s3c2440_pll_16934400);
+
+static struct subsys_interface s3c2442_plls169344_interface = {
+ .name = "s3c2442_plls169344",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+ return subsys_interface_register(&s3c2442_plls169344_interface);
+}
+arch_initcall(s3c2442_pll_16934400);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Samsung Electronics Co., Ltd.
+// Tomasz Figa <t.figa@samsung.com>
+// Copyright (C) 2008 Openmoko, Inc.
+// Copyright (C) 2004-2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// Samsung common power management helper functions.
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <plat/pm-common.h>
+
+/* helper functions to save and restore register state */
+
+/**
+ * s3c_pm_do_save() - save a set of registers for restoration on resume.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Run through the list of registers given, saving their contents in the
+ * array for later restoration when we wakeup.
+ */
+void s3c_pm_do_save(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ ptr->val = readl_relaxed(ptr->reg);
+ S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+ }
+}
+
+/**
+ * s3c_pm_do_restore() - restore register values from the save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Restore the register values saved from s3c_pm_do_save().
+ *
+ * Note, we do not use S3C_PMDBG() in here, as the system may not have
+ * restore the UARTs state yet
+*/
+
+void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ pr_debug("restore %p (restore %08lx, was %08x)\n",
+ ptr->reg, ptr->val, readl_relaxed(ptr->reg));
+
+ writel_relaxed(ptr->val, ptr->reg);
+ }
+}
+
+/**
+ * s3c_pm_do_restore_core() - early restore register values from save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * This is similar to s3c_pm_do_restore() except we try and minimise the
+ * side effects of the function in case registers that hardware might need
+ * to work has been restored.
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++)
+ writel_relaxed(ptr->val, ptr->reg);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// S3C series GPIO PM code
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/gpio-samsung.h>
+
+#include <plat/gpio-core.h>
+#include <plat/pm.h>
+
+/* PM GPIO helpers */
+
+#define OFFS_CON (0x00)
+#define OFFS_DAT (0x04)
+#define OFFS_UP (0x08)
+
+static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip)
+{
+ chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+ chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+}
+
+static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip)
+{
+ void __iomem *base = chip->base;
+ u32 old_gpcon = __raw_readl(base + OFFS_CON);
+ u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+ u32 gps_gpcon = chip->pm_save[0];
+ u32 gps_gpdat = chip->pm_save[1];
+ u32 gpcon;
+
+ /* GPACON only has one bit per control / data and no PULLUPs.
+ * GPACON[x] = 0 => Output, 1 => SFN */
+
+ /* first set all SFN bits to SFN */
+
+ gpcon = old_gpcon | gps_gpcon;
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* now set all the other bits */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+
+ S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+ chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct samsung_gpio_pm samsung_gpio_pm_1bit = {
+ .save = samsung_gpio_pm_1bit_save,
+ .resume = samsung_gpio_pm_1bit_resume,
+};
+
+static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip)
+{
+ chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+ chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+ chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+ return con >= 2;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+ return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+ return con == 1;
+}
+
+/**
+ * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * @chip: The chip information to resume.
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT } Change DAT first
+ * { IN => SFN } Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN } Change CON first, so new data will not glitch
+ * { SFN => IN } Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ * state for when it is next output.
+ */
+static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip)
+{
+ void __iomem *base = chip->base;
+ u32 old_gpcon = __raw_readl(base + OFFS_CON);
+ u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+ u32 gps_gpcon = chip->pm_save[0];
+ u32 gps_gpdat = chip->pm_save[1];
+ u32 gpcon, old, new, mask;
+ u32 change_mask = 0x0;
+ int nr;
+
+ /* restore GPIO pull-up settings */
+ __raw_writel(chip->pm_save[2], base + OFFS_UP);
+
+ /* Create a change_mask of all the items that need to have
+ * their CON value changed before their DAT value, so that
+ * we minimise the work between the two settings.
+ */
+
+ for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+ old = (old_gpcon & mask) >> nr;
+ new = (gps_gpcon & mask) >> nr;
+
+ /* If there is no change, then skip */
+
+ if (old == new)
+ continue;
+
+ /* If both are special function, then skip */
+
+ if (is_sfn(old) && is_sfn(new))
+ continue;
+
+ /* Change is IN => OUT, do not change now */
+
+ if (is_in(old) && is_out(new))
+ continue;
+
+ /* Change is SFN => OUT, do not change now */
+
+ if (is_sfn(old) && is_out(new))
+ continue;
+
+ /* We should now be at the case of IN=>SFN,
+ * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+ change_mask |= mask;
+ }
+
+
+ /* Write the new CON settings */
+
+ gpcon = old_gpcon & ~change_mask;
+ gpcon |= gps_gpcon & change_mask;
+
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* Now change any items that require DAT,CON */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+
+ S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+ chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct samsung_gpio_pm samsung_gpio_pm_2bit = {
+ .save = samsung_gpio_pm_2bit_save,
+ .resume = samsung_gpio_pm_2bit_resume,
+};
+
+#if defined(CONFIG_ARCH_S3C64XX)
+static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
+{
+ chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
+ chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
+ chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
+
+ if (chip->chip.ngpio > 8)
+ chip->pm_save[0] = __raw_readl(chip->base - 4);
+}
+
+static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+{
+ u32 old, new, mask;
+ u32 change_mask = 0x0;
+ int nr;
+
+ for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
+ old = (old_gpcon & mask) >> nr;
+ new = (gps_gpcon & mask) >> nr;
+
+ /* If there is no change, then skip */
+
+ if (old == new)
+ continue;
+
+ /* If both are special function, then skip */
+
+ if (is_sfn(old) && is_sfn(new))
+ continue;
+
+ /* Change is IN => OUT, do not change now */
+
+ if (is_in(old) && is_out(new))
+ continue;
+
+ /* Change is SFN => OUT, do not change now */
+
+ if (is_sfn(old) && is_out(new))
+ continue;
+
+ /* We should now be at the case of IN=>SFN,
+ * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+ change_mask |= mask;
+ }
+
+ return change_mask;
+}
+
+static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index)
+{
+ void __iomem *con = chip->base + (index * 4);
+ u32 old_gpcon = __raw_readl(con);
+ u32 gps_gpcon = chip->pm_save[index + 1];
+ u32 gpcon, mask;
+
+ mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+
+ gpcon = old_gpcon & ~mask;
+ gpcon |= gps_gpcon & mask;
+
+ __raw_writel(gpcon, con);
+}
+
+static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip)
+{
+ void __iomem *base = chip->base;
+ u32 old_gpcon[2];
+ u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+ u32 gps_gpdat = chip->pm_save[2];
+
+ /* First, modify the CON settings */
+
+ old_gpcon[0] = 0;
+ old_gpcon[1] = __raw_readl(base + OFFS_CON);
+
+ samsung_gpio_pm_4bit_con(chip, 0);
+ if (chip->chip.ngpio > 8) {
+ old_gpcon[0] = __raw_readl(base - 4);
+ samsung_gpio_pm_4bit_con(chip, -1);
+ }
+
+ /* Now change the configurations that require DAT,CON */
+
+ __raw_writel(chip->pm_save[2], base + OFFS_DAT);
+ __raw_writel(chip->pm_save[1], base + OFFS_CON);
+ if (chip->chip.ngpio > 8)
+ __raw_writel(chip->pm_save[0], base - 4);
+
+ __raw_writel(chip->pm_save[2], base + OFFS_DAT);
+ __raw_writel(chip->pm_save[3], base + OFFS_UP);
+
+ if (chip->chip.ngpio > 8) {
+ S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
+ chip->chip.label, old_gpcon[0], old_gpcon[1],
+ __raw_readl(base - 4),
+ __raw_readl(base + OFFS_CON),
+ old_gpdat, gps_gpdat);
+ } else
+ S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
+ chip->chip.label, old_gpcon[1],
+ __raw_readl(base + OFFS_CON),
+ old_gpdat, gps_gpdat);
+}
+
+struct samsung_gpio_pm samsung_gpio_pm_4bit = {
+ .save = samsung_gpio_pm_4bit_save,
+ .resume = samsung_gpio_pm_4bit_resume,
+};
+#endif /* CONFIG_ARCH_S3C64XX */
+
+/**
+ * samsung_pm_save_gpio() - save gpio chip data for suspend
+ * @ourchip: The chip for suspend.
+ */
+static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip)
+{
+ struct samsung_gpio_pm *pm = ourchip->pm;
+
+ if (pm == NULL || pm->save == NULL)
+ S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+ else
+ pm->save(ourchip);
+}
+
+/**
+ * samsung_pm_save_gpios() - Save the state of the GPIO banks.
+ *
+ * For all the GPIO banks, save the state of each one ready for going
+ * into a suspend mode.
+ */
+void samsung_pm_save_gpios(void)
+{
+ struct samsung_gpio_chip *ourchip;
+ unsigned int gpio_nr;
+
+ for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
+ ourchip = samsung_gpiolib_getchip(gpio_nr);
+ if (!ourchip) {
+ gpio_nr++;
+ continue;
+ }
+
+ samsung_pm_save_gpio(ourchip);
+
+ S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
+ ourchip->chip.label,
+ ourchip->pm_save[0],
+ ourchip->pm_save[1],
+ ourchip->pm_save[2],
+ ourchip->pm_save[3]);
+
+ gpio_nr += ourchip->chip.ngpio;
+ gpio_nr += CONFIG_S3C_GPIO_SPACE;
+ }
+}
+
+/**
+ * samsung_pm_resume_gpio() - restore gpio chip data after suspend
+ * @ourchip: The suspended chip.
+ */
+static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip)
+{
+ struct samsung_gpio_pm *pm = ourchip->pm;
+
+ if (pm == NULL || pm->resume == NULL)
+ S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+ else
+ pm->resume(ourchip);
+}
+
+void samsung_pm_restore_gpios(void)
+{
+ struct samsung_gpio_chip *ourchip;
+ unsigned int gpio_nr;
+
+ for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
+ ourchip = samsung_gpiolib_getchip(gpio_nr);
+ if (!ourchip) {
+ gpio_nr++;
+ continue;
+ }
+
+ samsung_pm_resume_gpio(ourchip);
+
+ gpio_nr += ourchip->chip.ngpio;
+ gpio_nr += CONFIG_S3C_GPIO_SPACE;
+ }
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2006 Ben Dooks <ben-linux@fluff.org>
+ *
+ * H1940 Suspend to RAM
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#include <mach/regs-gpio.h>
+
+ .text
+ .global h1940_pm_return
+
+h1940_pm_return:
+ mov r0, #S3C2410_PA_GPIO
+ ldr pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO]
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2006 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include "h1940.h"
+
+static void s3c2410_pm_prepare(void)
+{
+ /* ensure at least GSTATUS3 has the resume address */
+
+ __raw_writel(__pa_symbol(s3c_cpu_resume), S3C2410_GSTATUS3);
+
+ S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+ S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+
+ if (machine_is_h1940()) {
+ void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+ unsigned long ptr;
+ unsigned long calc = 0;
+
+ /* generate check for the bootloader to check on resume */
+
+ for (ptr = 0; ptr < 0x40000; ptr += 0x400)
+ calc += __raw_readl(base+ptr);
+
+ __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
+ }
+
+ /* RX3715 and RX1950 use similar to H1940 code and the
+ * same offsets for resume and checksum pointers */
+
+ if (machine_is_rx3715() || machine_is_rx1950()) {
+ void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+ unsigned long ptr;
+ unsigned long calc = 0;
+
+ /* generate check for the bootloader to check on resume */
+
+ for (ptr = 0; ptr < 0x40000; ptr += 0x4)
+ calc += __raw_readl(base+ptr);
+
+ __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
+ }
+
+ if (machine_is_aml_m5900()) {
+ gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPF(2));
+ }
+
+ if (machine_is_rx1950()) {
+ /* According to S3C2442 user's manual, page 7-17,
+ * when the system is operating in NAND boot mode,
+ * the hardware pin configuration - EINT[23:21] –
+ * must be set as input for starting up after
+ * wakeup from sleep mode
+ */
+ s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT);
+ s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT);
+ s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT);
+ }
+}
+
+static void s3c2410_pm_resume(void)
+{
+ unsigned long tmp;
+
+ /* unset the return-from-sleep flag, to ensure reset */
+
+ tmp = __raw_readl(S3C2410_GSTATUS2);
+ tmp &= S3C2410_GSTATUS2_OFFRESET;
+ __raw_writel(tmp, S3C2410_GSTATUS2);
+
+ if (machine_is_aml_m5900()) {
+ gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
+ gpio_free(S3C2410_GPF(2));
+ }
+}
+
+struct syscore_ops s3c2410_pm_syscore_ops = {
+ .resume = s3c2410_pm_resume,
+};
+
+static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
+{
+ pm_cpu_prep = s3c2410_pm_prepare;
+ pm_cpu_sleep = s3c2410_cpu_suspend;
+
+ return 0;
+}
+
+#if defined(CONFIG_CPU_S3C2410)
+static struct subsys_interface s3c2410_pm_interface = {
+ .name = "s3c2410_pm",
+ .subsys = &s3c2410_subsys,
+ .add_dev = s3c2410_pm_add,
+};
+
+/* register ourselves */
+
+static int __init s3c2410_pm_drvinit(void)
+{
+ return subsys_interface_register(&s3c2410_pm_interface);
+}
+
+arch_initcall(s3c2410_pm_drvinit);
+
+static struct subsys_interface s3c2410a_pm_interface = {
+ .name = "s3c2410a_pm",
+ .subsys = &s3c2410a_subsys,
+ .add_dev = s3c2410_pm_add,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+ return subsys_interface_register(&s3c2410a_pm_interface);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
+#endif
+
+#if defined(CONFIG_CPU_S3C2440)
+static struct subsys_interface s3c2440_pm_interface = {
+ .name = "s3c2440_pm",
+ .subsys = &s3c2440_subsys,
+ .add_dev = s3c2410_pm_add,
+};
+
+static int __init s3c2440_pm_drvinit(void)
+{
+ return subsys_interface_register(&s3c2440_pm_interface);
+}
+
+arch_initcall(s3c2440_pm_drvinit);
+#endif
+
+#if defined(CONFIG_CPU_S3C2442)
+static struct subsys_interface s3c2442_pm_interface = {
+ .name = "s3c2442_pm",
+ .subsys = &s3c2442_subsys,
+ .add_dev = s3c2410_pm_add,
+};
+
+static int __init s3c2442_pm_drvinit(void)
+{
+ return subsys_interface_register(&s3c2442_pm_interface);
+}
+
+arch_initcall(s3c2442_pm_drvinit);
+#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// http://armlinux.simtec.co.uk/.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/irq.h>
+
+#include <mach/irqs.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/wakeup-mask.h>
+
+#include "regs-dsc-s3c24xx.h"
+#include "s3c2412-power.h"
+
+extern void s3c2412_sleep_enter(void);
+
+static int s3c2412_cpu_suspend(unsigned long arg)
+{
+ unsigned long tmp;
+
+ /* set our standby method to sleep */
+
+ tmp = __raw_readl(S3C2412_PWRCFG);
+ tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
+ __raw_writel(tmp, S3C2412_PWRCFG);
+
+ s3c2412_sleep_enter();
+
+ pr_info("Failed to suspend the system\n");
+ return 1; /* Aborting suspend */
+}
+
+/* mapping of interrupts to parts of the wakeup mask */
+static const struct samsung_wakeup_mask wake_irqs[] = {
+ { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, },
+};
+
+static void s3c2412_pm_prepare(void)
+{
+ samsung_sync_wakemask(S3C2412_PWRCFG,
+ wake_irqs, ARRAY_SIZE(wake_irqs));
+}
+
+static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
+{
+ pm_cpu_prep = s3c2412_pm_prepare;
+ pm_cpu_sleep = s3c2412_cpu_suspend;
+
+ return 0;
+}
+
+static struct sleep_save s3c2412_sleep[] = {
+ SAVE_ITEM(S3C2412_DSC0),
+ SAVE_ITEM(S3C2412_DSC1),
+ SAVE_ITEM(S3C2413_GPJDAT),
+ SAVE_ITEM(S3C2413_GPJCON),
+ SAVE_ITEM(S3C2413_GPJUP),
+
+ /* save the PWRCFG to get back to original sleep method */
+
+ SAVE_ITEM(S3C2412_PWRCFG),
+
+ /* save the sleep configuration anyway, just in case these
+ * get damaged during wakeup */
+
+ SAVE_ITEM(S3C2412_GPBSLPCON),
+ SAVE_ITEM(S3C2412_GPCSLPCON),
+ SAVE_ITEM(S3C2412_GPDSLPCON),
+ SAVE_ITEM(S3C2412_GPFSLPCON),
+ SAVE_ITEM(S3C2412_GPGSLPCON),
+ SAVE_ITEM(S3C2412_GPHSLPCON),
+ SAVE_ITEM(S3C2413_GPJSLPCON),
+};
+
+static struct subsys_interface s3c2412_pm_interface = {
+ .name = "s3c2412_pm",
+ .subsys = &s3c2412_subsys,
+ .add_dev = s3c2412_pm_add,
+};
+
+static __init int s3c2412_pm_init(void)
+{
+ return subsys_interface_register(&s3c2412_pm_interface);
+}
+
+arch_initcall(s3c2412_pm_init);
+
+static int s3c2412_pm_suspend(void)
+{
+ s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+ return 0;
+}
+
+static void s3c2412_pm_resume(void)
+{
+ unsigned long tmp;
+
+ tmp = __raw_readl(S3C2412_PWRCFG);
+ tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+ tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
+ __raw_writel(tmp, S3C2412_PWRCFG);
+
+ s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+}
+
+struct syscore_ops s3c2412_pm_syscore_ops = {
+ .suspend = s3c2412_pm_suspend,
+ .resume = s3c2412_pm_resume,
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2010 Samsung Electronics Co., Ltd.
+// http://www.samsung.com
+//
+// S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support)
+
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include "s3c2412-power.h"
+
+#ifdef CONFIG_PM_SLEEP
+extern void s3c2412_sleep_enter(void);
+
+static int s3c2416_cpu_suspend(unsigned long arg)
+{
+ /* enable wakeup sources regardless of battery state */
+ __raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG);
+
+ /* set the mode as sleep, 2BED represents "Go to BED" */
+ __raw_writel(0x2BED, S3C2443_PWRMODE);
+
+ s3c2412_sleep_enter();
+
+ pr_info("Failed to suspend the system\n");
+ return 1; /* Aborting suspend */
+}
+
+static void s3c2416_pm_prepare(void)
+{
+ /*
+ * write the magic value u-boot uses to check for resume into
+ * the INFORM0 register, and ensure INFORM1 is set to the
+ * correct address to resume from.
+ */
+ __raw_writel(0x2BED, S3C2412_INFORM0);
+ __raw_writel(__pa_symbol(s3c_cpu_resume), S3C2412_INFORM1);
+}
+
+static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif)
+{
+ pm_cpu_prep = s3c2416_pm_prepare;
+ pm_cpu_sleep = s3c2416_cpu_suspend;
+
+ return 0;
+}
+
+static struct subsys_interface s3c2416_pm_interface = {
+ .name = "s3c2416_pm",
+ .subsys = &s3c2416_subsys,
+ .add_dev = s3c2416_pm_add,
+};
+
+static __init int s3c2416_pm_init(void)
+{
+ return subsys_interface_register(&s3c2416_pm_interface);
+}
+
+arch_initcall(s3c2416_pm_init);
+#endif
+
+static void s3c2416_pm_resume(void)
+{
+ /* unset the return-from-sleep amd inform flags */
+ __raw_writel(0x0, S3C2443_PWRMODE);
+ __raw_writel(0x0, S3C2412_INFORM0);
+ __raw_writel(0x0, S3C2412_INFORM1);
+}
+
+struct syscore_ops s3c2416_pm_syscore_ops = {
+ .resume = s3c2416_pm_resume,
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2004-2006 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// S3C24XX Power Manager (Suspend-To-RAM) support
+//
+// See Documentation/arm/samsung-s3c24xx/suspend.rst for more information
+//
+// Parts based on arch/arm/mach-pxa/pm.c
+//
+// Thanks to Dimitry Andric for debugging
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/io.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/gpio-samsung.h>
+
+#include <asm/mach/time.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/pm.h>
+
+#include "regs-mem-s3c24xx.h"
+
+#define PFX "s3c24xx-pm: "
+
+#ifdef CONFIG_PM_SLEEP
+static struct sleep_save core_save[] = {
+ /* we restore the timings here, with the proviso that the board
+ * brings the system up in an slower, or equal frequency setting
+ * to the original system.
+ *
+ * if we cannot guarantee this, then things are going to go very
+ * wrong here, as we modify the refresh and both pll settings.
+ */
+
+ SAVE_ITEM(S3C2410_BWSCON),
+ SAVE_ITEM(S3C2410_BANKCON0),
+ SAVE_ITEM(S3C2410_BANKCON1),
+ SAVE_ITEM(S3C2410_BANKCON2),
+ SAVE_ITEM(S3C2410_BANKCON3),
+ SAVE_ITEM(S3C2410_BANKCON4),
+ SAVE_ITEM(S3C2410_BANKCON5),
+};
+#endif
+
+/* s3c_pm_check_resume_pin
+ *
+ * check to see if the pin is configured correctly for sleep mode, and
+ * make any necessary adjustments if it is not
+*/
+
+static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+{
+ unsigned long irqstate;
+ unsigned long pinstate;
+ int irq = gpio_to_irq(pin);
+
+ if (irqoffs < 4)
+ irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
+ else
+ irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
+
+ pinstate = s3c_gpio_getcfg(pin);
+
+ if (!irqstate) {
+ if (pinstate == S3C2410_GPIO_IRQ)
+ S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin);
+ } else {
+ if (pinstate == S3C2410_GPIO_IRQ) {
+ S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
+ s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
+ }
+ }
+}
+
+/* s3c_pm_configure_extint
+ *
+ * configure all external interrupt pins
+*/
+
+void s3c_pm_configure_extint(void)
+{
+ int pin;
+
+ /* for each of the external interrupts (EINT0..EINT15) we
+ * need to check whether it is an external interrupt source,
+ * and then configure it as an input if it is not
+ */
+
+ for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
+ s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
+ }
+
+ for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
+ s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
+ }
+}
+
+#ifdef CONFIG_PM_SLEEP
+void s3c_pm_restore_core(void)
+{
+ s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+}
+
+void s3c_pm_save_core(void)
+{
+ s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// S3C64XX CPU PM support.
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/pm_domain.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/wakeup-mask.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/gpio-samsung.h>
+
+#include "regs-gpio-memport-s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-sys-s3c64xx.h"
+#include "regs-syscon-power-s3c64xx.h"
+
+struct s3c64xx_pm_domain {
+ char *const name;
+ u32 ena;
+ u32 pwr_stat;
+ struct generic_pm_domain pd;
+};
+
+static int s3c64xx_pd_off(struct generic_pm_domain *domain)
+{
+ struct s3c64xx_pm_domain *pd;
+ u32 val;
+
+ pd = container_of(domain, struct s3c64xx_pm_domain, pd);
+
+ val = __raw_readl(S3C64XX_NORMAL_CFG);
+ val &= ~(pd->ena);
+ __raw_writel(val, S3C64XX_NORMAL_CFG);
+
+ return 0;
+}
+
+static int s3c64xx_pd_on(struct generic_pm_domain *domain)
+{
+ struct s3c64xx_pm_domain *pd;
+ u32 val;
+ long retry = 1000000L;
+
+ pd = container_of(domain, struct s3c64xx_pm_domain, pd);
+
+ val = __raw_readl(S3C64XX_NORMAL_CFG);
+ val |= pd->ena;
+ __raw_writel(val, S3C64XX_NORMAL_CFG);
+
+ /* Not all domains provide power status readback */
+ if (pd->pwr_stat) {
+ do {
+ cpu_relax();
+ if (__raw_readl(S3C64XX_BLK_PWR_STAT) & pd->pwr_stat)
+ break;
+ } while (retry--);
+
+ if (!retry) {
+ pr_err("Failed to start domain %s\n", pd->name);
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+static struct s3c64xx_pm_domain s3c64xx_pm_irom = {
+ .name = "IROM",
+ .ena = S3C64XX_NORMALCFG_IROM_ON,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_etm = {
+ .name = "ETM",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_ETM_ON,
+ .pwr_stat = S3C64XX_BLKPWRSTAT_ETM,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_s = {
+ .name = "S",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_S_ON,
+ .pwr_stat = S3C64XX_BLKPWRSTAT_S,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_f = {
+ .name = "F",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_F_ON,
+ .pwr_stat = S3C64XX_BLKPWRSTAT_F,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_p = {
+ .name = "P",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_P_ON,
+ .pwr_stat = S3C64XX_BLKPWRSTAT_P,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_i = {
+ .name = "I",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_I_ON,
+ .pwr_stat = S3C64XX_BLKPWRSTAT_I,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_g = {
+ .name = "G",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_G_ON,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_v = {
+ .name = "V",
+ .ena = S3C64XX_NORMALCFG_DOMAIN_V_ON,
+ .pwr_stat = S3C64XX_BLKPWRSTAT_V,
+ .pd = {
+ .power_off = s3c64xx_pd_off,
+ .power_on = s3c64xx_pd_on,
+ },
+};
+
+static struct s3c64xx_pm_domain *s3c64xx_always_on_pm_domains[] = {
+ &s3c64xx_pm_irom,
+};
+
+static struct s3c64xx_pm_domain *s3c64xx_pm_domains[] = {
+ &s3c64xx_pm_etm,
+ &s3c64xx_pm_g,
+ &s3c64xx_pm_v,
+ &s3c64xx_pm_i,
+ &s3c64xx_pm_p,
+ &s3c64xx_pm_s,
+ &s3c64xx_pm_f,
+};
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+void s3c_pm_debug_smdkled(u32 set, u32 clear)
+{
+ unsigned long flags;
+ int i;
+
+ local_irq_save(flags);
+ for (i = 0; i < 4; i++) {
+ if (clear & (1 << i))
+ gpio_set_value(S3C64XX_GPN(12 + i), 0);
+ if (set & (1 << i))
+ gpio_set_value(S3C64XX_GPN(12 + i), 1);
+ }
+ local_irq_restore(flags);
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static struct sleep_save core_save[] = {
+ SAVE_ITEM(S3C64XX_MEM0DRVCON),
+ SAVE_ITEM(S3C64XX_MEM1DRVCON),
+};
+
+static struct sleep_save misc_save[] = {
+ SAVE_ITEM(S3C64XX_AHB_CON0),
+ SAVE_ITEM(S3C64XX_AHB_CON1),
+ SAVE_ITEM(S3C64XX_AHB_CON2),
+
+ SAVE_ITEM(S3C64XX_SPCON),
+
+ SAVE_ITEM(S3C64XX_MEM0CONSTOP),
+ SAVE_ITEM(S3C64XX_MEM1CONSTOP),
+ SAVE_ITEM(S3C64XX_MEM0CONSLP0),
+ SAVE_ITEM(S3C64XX_MEM0CONSLP1),
+ SAVE_ITEM(S3C64XX_MEM1CONSLP),
+
+ SAVE_ITEM(S3C64XX_SDMA_SEL),
+ SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
+
+ SAVE_ITEM(S3C64XX_NORMAL_CFG),
+};
+
+void s3c_pm_configure_extint(void)
+{
+ __raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+ __raw_writel(0, S3C64XX_EINT_MASK);
+
+ s3c_pm_debug_smdkled(1 << 2, 0);
+
+ s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+ s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+ s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+ s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+#endif
+
+/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
+ * put the per-cpu code in here until any new cpu comes along and changes
+ * this.
+ */
+
+static int s3c64xx_cpu_suspend(unsigned long arg)
+{
+ unsigned long tmp;
+
+ /* set our standby method to sleep */
+
+ tmp = __raw_readl(S3C64XX_PWR_CFG);
+ tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+ tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
+ __raw_writel(tmp, S3C64XX_PWR_CFG);
+
+ /* clear any old wakeup */
+
+ __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
+ S3C64XX_WAKEUP_STAT);
+
+ /* set the LED state to 0110 over sleep */
+ s3c_pm_debug_smdkled(3 << 1, 0xf);
+
+ /* issue the standby signal into the pm unit. Note, we
+ * issue a write-buffer drain just in case */
+
+ tmp = 0;
+
+ asm("b 1f\n\t"
+ ".align 5\n\t"
+ "1:\n\t"
+ "mcr p15, 0, %0, c7, c10, 5\n\t"
+ "mcr p15, 0, %0, c7, c10, 4\n\t"
+ "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+ /* we should never get past here */
+
+ pr_info("Failed to suspend the system\n");
+ return 1; /* Aborting suspend */
+}
+
+/* mapping of interrupts to parts of the wakeup mask */
+static const struct samsung_wakeup_mask wake_irqs[] = {
+ { .irq = IRQ_RTC_ALARM, .bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, },
+ { .irq = IRQ_RTC_TIC, .bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, },
+ { .irq = IRQ_PENDN, .bit = S3C64XX_PWRCFG_TS_DISABLE, },
+ { .irq = IRQ_HSMMC0, .bit = S3C64XX_PWRCFG_MMC0_DISABLE, },
+ { .irq = IRQ_HSMMC1, .bit = S3C64XX_PWRCFG_MMC1_DISABLE, },
+ { .irq = IRQ_HSMMC2, .bit = S3C64XX_PWRCFG_MMC2_DISABLE, },
+ { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_BATF_DISABLE},
+ { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
+ { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_HSI_DISABLE },
+ { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
+};
+
+static void s3c64xx_pm_prepare(void)
+{
+ samsung_sync_wakemask(S3C64XX_PWR_CFG,
+ wake_irqs, ARRAY_SIZE(wake_irqs));
+
+ /* store address of resume. */
+ __raw_writel(__pa_symbol(s3c_cpu_resume), S3C64XX_INFORM0);
+
+ /* ensure previous wakeup state is cleared before sleeping */
+ __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
+}
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
+{
+ u32 ucon;
+ u32 ucon_clk
+ u32 save_clk;
+ u32 new_ucon;
+ u32 delta;
+
+ if (!soc_is_s3c64xx())
+ return;
+
+ ucon = __raw_readl(regs + S3C2410_UCON);
+ ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+ sav_clk = save->ucon & S3C6400_UCON_CLKMASK;
+
+ /* S3C64XX UART blocks only support level interrupts, so ensure that
+ * when we restore unused UART blocks we force the level interrupt
+ * settigs. */
+ save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+ /* We have a constraint on changing the clock type of the UART
+ * between UCLKx and PCLK, so ensure that when we restore UCON
+ * that the CLK field is correctly modified if the bootloader
+ * has changed anything.
+ */
+ if (ucon_clk != save_clk) {
+ new_ucon = save->ucon;
+ delta = ucon_clk ^ save_clk;
+
+ /* change from UCLKx => wrong PCLK,
+ * either UCLK can be tested for by a bit-test
+ * with UCLK0 */
+ if (ucon_clk & S3C6400_UCON_UCLK0 &&
+ !(save_clk & S3C6400_UCON_UCLK0) &&
+ delta & S3C6400_UCON_PCLK2) {
+ new_ucon &= ~S3C6400_UCON_UCLK0;
+ } else if (delta == S3C6400_UCON_PCLK2) {
+ /* as an precaution, don't change from
+ * PCLK2 => PCLK or vice-versa */
+ new_ucon ^= S3C6400_UCON_PCLK2;
+ }
+
+ S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+ ucon, new_ucon, save->ucon);
+ save->ucon = new_ucon;
+ }
+}
+#endif
+
+int __init s3c64xx_pm_init(void)
+{
+ int i;
+
+ s3c_pm_init();
+
+ for (i = 0; i < ARRAY_SIZE(s3c64xx_always_on_pm_domains); i++)
+ pm_genpd_init(&s3c64xx_always_on_pm_domains[i]->pd,
+ &pm_domain_always_on_gov, false);
+
+ for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
+ pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
+
+#ifdef CONFIG_S3C_DEV_FB
+ if (dev_get_platdata(&s3c_device_fb.dev))
+ pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
+#endif
+
+ return 0;
+}
+
+static __init int s3c64xx_pm_initcall(void)
+{
+ if (!soc_is_s3c64xx())
+ return 0;
+
+ pm_cpu_prep = s3c64xx_pm_prepare;
+ pm_cpu_sleep = s3c64xx_cpu_suspend;
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+ gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
+ gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
+ gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
+ gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
+ gpio_direction_output(S3C64XX_GPN(12), 0);
+ gpio_direction_output(S3C64XX_GPN(13), 0);
+ gpio_direction_output(S3C64XX_GPN(14), 0);
+ gpio_direction_output(S3C64XX_GPN(15), 0);
+#endif
+
+ return 0;
+}
+arch_initcall(s3c64xx_pm_initcall);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2004-2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// S3C common power management (suspend to ram) support.
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/serial_s3c.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/suspend.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-irq.h>
+#include <mach/irqs.h>
+
+#include <asm/irq.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <mach/pm-core.h>
+
+/* for external use */
+
+unsigned long s3c_pm_flags;
+
+/* The IRQ ext-int code goes here, it is too small to currently bother
+ * with its own file. */
+
+unsigned long s3c_irqwake_intmask = 0xffffffffL;
+unsigned long s3c_irqwake_eintmask = 0xffffffffL;
+
+int s3c_irqext_wake(struct irq_data *data, unsigned int state)
+{
+ unsigned long bit = 1L << IRQ_EINT_BIT(data->irq);
+
+ if (!(s3c_irqwake_eintallow & bit))
+ return -ENOENT;
+
+ printk(KERN_INFO "wake %s for irq %d\n",
+ state ? "enabled" : "disabled", data->irq);
+
+ if (!state)
+ s3c_irqwake_eintmask |= bit;
+ else
+ s3c_irqwake_eintmask &= ~bit;
+
+ return 0;
+}
+
+void (*pm_cpu_prep)(void);
+int (*pm_cpu_sleep)(unsigned long);
+
+#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+
+/* s3c_pm_enter
+ *
+ * central control for sleep/resume process
+*/
+
+static int s3c_pm_enter(suspend_state_t state)
+{
+ int ret;
+ /* ensure the debug is initialised (if enabled) */
+ s3c_pm_debug_init_uart();
+
+ S3C_PMDBG("%s(%d)\n", __func__, state);
+
+ if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+ printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
+ return -EINVAL;
+ }
+
+ /* check if we have anything to wake-up with... bad things seem
+ * to happen if you suspend with no wakeup (system will often
+ * require a full power-cycle)
+ */
+
+ if (!of_have_populated_dt() &&
+ !any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+ !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+ printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
+ printk(KERN_ERR "%s: Aborting sleep\n", __func__);
+ return -EINVAL;
+ }
+
+ /* save all necessary core registers not covered by the drivers */
+
+ if (!of_have_populated_dt()) {
+ samsung_pm_save_gpios();
+ samsung_pm_saved_gpios();
+ }
+
+ s3c_pm_save_uarts(soc_is_s3c2410());
+ s3c_pm_save_core();
+
+ /* set the irq configuration for wake */
+
+ s3c_pm_configure_extint();
+
+ S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+ s3c_irqwake_intmask, s3c_irqwake_eintmask);
+
+ s3c_pm_arch_prepare_irqs();
+
+ /* call cpu specific preparation */
+
+ pm_cpu_prep();
+
+ /* flush cache back to ram */
+
+ flush_cache_all();
+
+ s3c_pm_check_store();
+
+ /* send the cpu to sleep... */
+
+ s3c_pm_arch_stop_clocks();
+
+ /* this will also act as our return point from when
+ * we resume as it saves its own register state and restores it
+ * during the resume. */
+
+ ret = cpu_suspend(0, pm_cpu_sleep);
+ if (ret)
+ return ret;
+
+ /* restore the system state */
+
+ s3c_pm_restore_core();
+ s3c_pm_restore_uarts(soc_is_s3c2410());
+
+ if (!of_have_populated_dt()) {
+ samsung_pm_restore_gpios();
+ s3c_pm_restored_gpios();
+ }
+
+ s3c_pm_debug_init_uart();
+
+ /* check what irq (if any) restored the system */
+
+ s3c_pm_arch_show_resume_irqs();
+
+ S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
+
+ /* LEDs should now be 1110 */
+ s3c_pm_debug_smdkled(1 << 1, 0);
+
+ s3c_pm_check_restore();
+
+ /* ok, let's return from sleep */
+
+ S3C_PMDBG("S3C PM Resume (post-restore)\n");
+ return 0;
+}
+
+static int s3c_pm_prepare(void)
+{
+ /* prepare check area if configured */
+
+ s3c_pm_check_prepare();
+ return 0;
+}
+
+static void s3c_pm_finish(void)
+{
+ s3c_pm_check_cleanup();
+}
+
+static const struct platform_suspend_ops s3c_pm_ops = {
+ .enter = s3c_pm_enter,
+ .prepare = s3c_pm_prepare,
+ .finish = s3c_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+/* s3c_pm_init
+ *
+ * Attach the power management functions. This should be called
+ * from the board specific initialisation if the board supports
+ * it.
+*/
+
+int __init s3c_pm_init(void)
+{
+ printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
+
+ suspend_set_ops(&s3c_pm_ops);
+ return 0;
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * S3C2440/S3C2412 Signal Drive Strength Control
+ */
+
+
+#ifndef __ASM_ARCH_REGS_DSC_S3C24XX_H
+#define __ASM_ARCH_REGS_DSC_S3C24XX_H __FILE__
+
+/* S3C2412 */
+#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc)
+#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0)
+
+/* S3C2440 */
+#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
+#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8)
+
+#endif /* __ASM_ARCH_REGS_DSC_S3C24XX_H */
+
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO memory port register definitions
+ */
+
+#ifndef __MACH_S3C64XX_REGS_GPIO_MEMPORT_H
+#define __MACH_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
+
+#define S3C64XX_MEM0CONSTOP S3C64XX_GPIOREG(0x1B0)
+#define S3C64XX_MEM1CONSTOP S3C64XX_GPIOREG(0x1B4)
+
+#define S3C64XX_MEM0CONSLP0 S3C64XX_GPIOREG(0x1C0)
+#define S3C64XX_MEM0CONSLP1 S3C64XX_GPIOREG(0x1C4)
+#define S3C64XX_MEM1CONSLP S3C64XX_GPIOREG(0x1C8)
+
+#define S3C64XX_MEM0DRVCON S3C64XX_GPIOREG(0x1D0)
+#define S3C64XX_MEM1DRVCON S3C64XX_GPIOREG(0x1D4)
+
+#endif /* __MACH_S3C64XX_REGS_GPIO_MEMPORT_H */
+
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * S3C2410 Memory Control register definitions
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H
+#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__
+
+#include <plat/map-s3c.h>
+
+#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+
+#define S3C2410_BWSCON S3C2410_MEMREG(0x00)
+#define S3C2410_BANKCON0 S3C2410_MEMREG(0x04)
+#define S3C2410_BANKCON1 S3C2410_MEMREG(0x08)
+#define S3C2410_BANKCON2 S3C2410_MEMREG(0x0C)
+#define S3C2410_BANKCON3 S3C2410_MEMREG(0x10)
+#define S3C2410_BANKCON4 S3C2410_MEMREG(0x14)
+#define S3C2410_BANKCON5 S3C2410_MEMREG(0x18)
+#define S3C2410_BANKCON6 S3C2410_MEMREG(0x1C)
+#define S3C2410_BANKCON7 S3C2410_MEMREG(0x20)
+#define S3C2410_REFRESH S3C2410_MEMREG(0x24)
+#define S3C2410_BANKSIZE S3C2410_MEMREG(0x28)
+
+#define S3C2410_BWSCON_ST1 (1 << 7)
+#define S3C2410_BWSCON_ST2 (1 << 11)
+#define S3C2410_BWSCON_ST3 (1 << 15)
+#define S3C2410_BWSCON_ST4 (1 << 19)
+#define S3C2410_BWSCON_ST5 (1 << 23)
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_WS (1 << 2)
+
+#define S3C2410_BANKCON_PMC16 (0x3)
+
+#define S3C2410_BANKCON_Tacp_SHIFT (2)
+#define S3C2410_BANKCON_Tcah_SHIFT (4)
+#define S3C2410_BANKCON_Tcoh_SHIFT (6)
+#define S3C2410_BANKCON_Tacc_SHIFT (8)
+#define S3C2410_BANKCON_Tcos_SHIFT (11)
+#define S3C2410_BANKCON_Tacs_SHIFT (13)
+
+#define S3C2410_BANKCON_SDRAM (0x3 << 15)
+
+#define S3C2410_REFRESH_SELF (1 << 22)
+
+#define S3C2410_BANKSIZE_MASK (0x7 << 0)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - modem block registers
+ */
+
+#ifndef __MACH_S3C64XX_REGS_MODEM_H
+#define __MACH_S3C64XX_REGS_MODEM_H __FILE__
+
+#define S3C64XX_MODEMREG(x) (S3C64XX_VA_MODEM + (x))
+
+#define S3C64XX_MODEM_INT2AP S3C64XX_MODEMREG(0x0)
+#define S3C64XX_MODEM_INT2MODEM S3C64XX_MODEMREG(0x4)
+#define S3C64XX_MODEM_MIFCON S3C64XX_MODEMREG(0x8)
+#define S3C64XX_MODEM_MIFPCON S3C64XX_MODEMREG(0xC)
+#define S3C64XX_MODEM_INTCLR S3C64XX_MODEMREG(0x10)
+#define S3C64XX_MODEM_DMA_TXADDR S3C64XX_MODEMREG(0x14)
+#define S3C64XX_MODEM_DMA_RXADDR S3C64XX_MODEMREG(0x18)
+
+#define MIFPCON_INT2M_LEVEL (1 << 4)
+#define MIFPCON_LCD_BYPASS (1 << 3)
+
+#endif /* __MACH_S3C64XX_REGS_MODEM_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2009 Andy Green <andy@warmcat.com>
+ *
+ * S3C64XX SROM definitions
+ */
+
+#ifndef __MACH_S3C64XX_REGS_SROM_H
+#define __MACH_S3C64XX_REGS_SROM_H __FILE__
+
+#define S3C64XX_SROMREG(x) (S3C_VA_MEM + (x))
+
+#define S3C64XX_SROM_BW S3C64XX_SROMREG(0)
+#define S3C64XX_SROM_BC0 S3C64XX_SROMREG(4)
+#define S3C64XX_SROM_BC1 S3C64XX_SROMREG(8)
+#define S3C64XX_SROM_BC2 S3C64XX_SROMREG(0xc)
+#define S3C64XX_SROM_BC3 S3C64XX_SROMREG(0x10)
+#define S3C64XX_SROM_BC4 S3C64XX_SROMREG(0x14)
+#define S3C64XX_SROM_BC5 S3C64XX_SROMREG(0x18)
+
+/*
+ * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4
+ */
+
+#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT 0
+#define S3C64XX_SROM_BW__WAITENABLE__SHIFT 2
+#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT 3
+#define S3C64XX_SROM_BW__CS_MASK 0xf
+
+#define S3C64XX_SROM_BW__NCS0__SHIFT 0
+#define S3C64XX_SROM_BW__NCS1__SHIFT 4
+#define S3C64XX_SROM_BW__NCS2__SHIFT 8
+#define S3C64XX_SROM_BW__NCS3__SHIFT 0xc
+#define S3C64XX_SROM_BW__NCS4__SHIFT 0x10
+
+/*
+ * applies to same to BCS0 - BCS4
+ */
+
+#define S3C64XX_SROM_BCX__PMC__SHIFT 0
+#define S3C64XX_SROM_BCX__PMC__MASK 3
+#define S3C64XX_SROM_BCX__TACP__SHIFT 4
+#define S3C64XX_SROM_BCX__TACP__MASK 0xf
+#define S3C64XX_SROM_BCX__TCAH__SHIFT 8
+#define S3C64XX_SROM_BCX__TCAH__MASK 0xf
+#define S3C64XX_SROM_BCX__TCOH__SHIFT 12
+#define S3C64XX_SROM_BCX__TCOH__MASK 0xf
+#define S3C64XX_SROM_BCX__TACC__SHIFT 16
+#define S3C64XX_SROM_BCX__TACC__MASK 0x1f
+#define S3C64XX_SROM_BCX__TCOS__SHIFT 24
+#define S3C64XX_SROM_BCX__TCOS__MASK 0xf
+#define S3C64XX_SROM_BCX__TACS__SHIFT 28
+#define S3C64XX_SROM_BCX__TACS__MASK 0xf
+
+#endif /* __MACH_S3C64XX_REGS_SROM_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX system register definitions
+*/
+
+#ifndef __MACH_S3C64XX_REGS_SYS_H
+#define __MACH_S3C64XX_REGS_SYS_H __FILE__
+
+#define S3C_SYSREG(x) (S3C_VA_SYS + (x))
+
+#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100)
+#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104)
+#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108)
+
+#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110)
+
+#define S3C64XX_OTHERS S3C_SYSREG(0x900)
+
+#define S3C64XX_OTHERS_USBMASK (1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6)
+
+#endif /* __MACH_S3C64XX_REGS_SYS_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - syscon power and sleep control registers
+*/
+
+#ifndef __MACH_S3C64XX_REGS_SYSCON_POWER_H
+#define __MACH_S3C64XX_REGS_SYSCON_POWER_H __FILE__
+
+#define S3C64XX_PWR_CFG S3C_SYSREG(0x804)
+
+#define S3C64XX_PWRCFG_OSC_OTG_DISABLE (1 << 17)
+#define S3C64XX_PWRCFG_MMC2_DISABLE (1 << 16)
+#define S3C64XX_PWRCFG_MMC1_DISABLE (1 << 15)
+#define S3C64XX_PWRCFG_MMC0_DISABLE (1 << 14)
+#define S3C64XX_PWRCFG_HSI_DISABLE (1 << 13)
+#define S3C64XX_PWRCFG_TS_DISABLE (1 << 12)
+#define S3C64XX_PWRCFG_RTC_TICK_DISABLE (1 << 11)
+#define S3C64XX_PWRCFG_RTC_ALARM_DISABLE (1 << 10)
+#define S3C64XX_PWRCFG_MSM_DISABLE (1 << 9)
+#define S3C64XX_PWRCFG_KEY_DISABLE (1 << 8)
+#define S3C64XX_PWRCFG_BATF_DISABLE (1 << 7)
+
+#define S3C64XX_PWRCFG_CFG_WFI_MASK (0x3 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_SHIFT (5)
+#define S3C64XX_PWRCFG_CFG_WFI_IGNORE (0x0 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_IDLE (0x1 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_STOP (0x2 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_SLEEP (0x3 << 5)
+
+#define S3C64XX_PWRCFG_CFG_BATFLT_MASK (0x3 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_SHIFT (3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_IGNORE (0x0 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_IRQ (0x1 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_SLEEP (0x3 << 3)
+
+#define S3C64XX_PWRCFG_CFG_BAT_WAKE (1 << 2)
+#define S3C64XX_PWRCFG_OSC27_EN (1 << 0)
+
+#define S3C64XX_EINT_MASK S3C_SYSREG(0x808)
+
+#define S3C64XX_NORMAL_CFG S3C_SYSREG(0x810)
+
+#define S3C64XX_NORMALCFG_IROM_ON (1 << 30)
+#define S3C64XX_NORMALCFG_DOMAIN_ETM_ON (1 << 16)
+#define S3C64XX_NORMALCFG_DOMAIN_S_ON (1 << 15)
+#define S3C64XX_NORMALCFG_DOMAIN_F_ON (1 << 14)
+#define S3C64XX_NORMALCFG_DOMAIN_P_ON (1 << 13)
+#define S3C64XX_NORMALCFG_DOMAIN_I_ON (1 << 12)
+#define S3C64XX_NORMALCFG_DOMAIN_G_ON (1 << 10)
+#define S3C64XX_NORMALCFG_DOMAIN_V_ON (1 << 9)
+
+#define S3C64XX_STOP_CFG S3C_SYSREG(0x814)
+
+#define S3C64XX_STOPCFG_MEMORY_ARM_ON (1 << 29)
+#define S3C64XX_STOPCFG_TOP_MEMORY_ON (1 << 20)
+#define S3C64XX_STOPCFG_ARM_LOGIC_ON (1 << 17)
+#define S3C64XX_STOPCFG_TOP_LOGIC_ON (1 << 8)
+#define S3C64XX_STOPCFG_OSC_EN (1 << 0)
+
+#define S3C64XX_SLEEP_CFG S3C_SYSREG(0x818)
+
+#define S3C64XX_SLEEPCFG_OSC_EN (1 << 0)
+
+#define S3C64XX_STOP_MEM_CFG S3C_SYSREG(0x81c)
+
+#define S3C64XX_STOPMEMCFG_MODEMIF_RETAIN (1 << 6)
+#define S3C64XX_STOPMEMCFG_HOSTIF_RETAIN (1 << 5)
+#define S3C64XX_STOPMEMCFG_OTG_RETAIN (1 << 4)
+#define S3C64XX_STOPMEMCFG_HSMCC_RETAIN (1 << 3)
+#define S3C64XX_STOPMEMCFG_IROM_RETAIN (1 << 2)
+#define S3C64XX_STOPMEMCFG_IRDA_RETAIN (1 << 1)
+#define S3C64XX_STOPMEMCFG_NFCON_RETAIN (1 << 0)
+
+#define S3C64XX_OSC_STABLE S3C_SYSREG(0x824)
+#define S3C64XX_PWR_STABLE S3C_SYSREG(0x828)
+
+#define S3C64XX_WAKEUP_STAT S3C_SYSREG(0x908)
+
+#define S3C64XX_WAKEUPSTAT_MMC2 (1 << 11)
+#define S3C64XX_WAKEUPSTAT_MMC1 (1 << 10)
+#define S3C64XX_WAKEUPSTAT_MMC0 (1 << 9)
+#define S3C64XX_WAKEUPSTAT_HSI (1 << 8)
+#define S3C64XX_WAKEUPSTAT_BATFLT (1 << 6)
+#define S3C64XX_WAKEUPSTAT_MSM (1 << 5)
+#define S3C64XX_WAKEUPSTAT_KEY (1 << 4)
+#define S3C64XX_WAKEUPSTAT_TS (1 << 3)
+#define S3C64XX_WAKEUPSTAT_RTC_TICK (1 << 2)
+#define S3C64XX_WAKEUPSTAT_RTC_ALARM (1 << 1)
+#define S3C64XX_WAKEUPSTAT_EINT (1 << 0)
+
+#define S3C64XX_BLK_PWR_STAT S3C_SYSREG(0x90c)
+
+#define S3C64XX_BLKPWRSTAT_G (1 << 7)
+#define S3C64XX_BLKPWRSTAT_ETM (1 << 6)
+#define S3C64XX_BLKPWRSTAT_S (1 << 5)
+#define S3C64XX_BLKPWRSTAT_F (1 << 4)
+#define S3C64XX_BLKPWRSTAT_P (1 << 3)
+#define S3C64XX_BLKPWRSTAT_I (1 << 2)
+#define S3C64XX_BLKPWRSTAT_V (1 << 1)
+#define S3C64XX_BLKPWRSTAT_TOP (1 << 0)
+
+#define S3C64XX_INFORM0 S3C_SYSREG(0xA00)
+#define S3C64XX_INFORM1 S3C_SYSREG(0xA04)
+#define S3C64XX_INFORM2 S3C_SYSREG(0xA08)
+#define S3C64XX_INFORM3 S3C_SYSREG(0xA0C)
+
+#endif /* __MACH_S3C64XX_REGS_SYSCON_POWER_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB2.0 Highspeed/OtG device PHY registers
+*/
+
+/* Note, this is a separate header file as some of the clock framework
+ * needs to touch this if the clk_48m is used as the USB OHCI or other
+ * peripheral source.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
+#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
+
+/* S3C64XX_PA_USB_HSPHY */
+
+#define S3C_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
+
+#define S3C_PHYPWR S3C_HSOTG_PHYREG(0x00)
+#define S3C_PHYPWR_NORMAL_MASK (0x19 << 0)
+#define S3C_PHYPWR_OTG_DISABLE (1 << 4)
+#define S3C_PHYPWR_ANALOG_POWERDOWN (1 << 3)
+#define SRC_PHYPWR_FORCE_SUSPEND (1 << 1)
+
+#define S3C_PHYCLK S3C_HSOTG_PHYREG(0x04)
+#define S3C_PHYCLK_MODE_USB11 (1 << 6)
+#define S3C_PHYCLK_EXT_OSC (1 << 5)
+#define S3C_PHYCLK_CLK_FORCE (1 << 4)
+#define S3C_PHYCLK_ID_PULL (1 << 2)
+#define S3C_PHYCLK_CLKSEL_MASK (0x3 << 0)
+#define S3C_PHYCLK_CLKSEL_SHIFT (0)
+#define S3C_PHYCLK_CLKSEL_48M (0x0 << 0)
+#define S3C_PHYCLK_CLKSEL_12M (0x2 << 0)
+#define S3C_PHYCLK_CLKSEL_24M (0x3 << 0)
+
+#define S3C_RSTCON S3C_HSOTG_PHYREG(0x08)
+#define S3C_RSTCON_PHYCLK (1 << 2)
+#define S3C_RSTCON_HCLK (1 << 1)
+#define S3C_RSTCON_PHY (1 << 0)
+
+#define S3C_PHYTUNE S3C_HSOTG_PHYREG(0x20)
+
+#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2003-2005 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// http://www.simtec.co.uk/products/EB2410ITX/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+#include <mach/gpio-samsung.h>
+#include <asm/irq.h>
+#include <asm/system_misc.h>
+
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+#include "s3c24xx.h"
+
+/* Initial IO mappings */
+
+static struct map_desc s3c2410_iodesc[] __initdata = {
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(WATCHDOG),
+};
+
+/* our uart devices */
+
+/* uart registration process */
+
+void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2410-uart", s3c2410_uart_resources, cfg, no);
+}
+
+/* s3c2410_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+*/
+
+void __init s3c2410_map_io(void)
+{
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
+
+ iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
+}
+
+struct bus_type s3c2410_subsys = {
+ .name = "s3c2410-core",
+ .dev_name = "s3c2410-core",
+};
+
+/* Note, we would have liked to name this s3c2410-core, but we cannot
+ * register two subsystems with the same name.
+ */
+struct bus_type s3c2410a_subsys = {
+ .name = "s3c2410a-core",
+ .dev_name = "s3c2410a-core",
+};
+
+static struct device s3c2410_dev = {
+ .bus = &s3c2410_subsys,
+};
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2410 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+static int __init s3c2410_core_init(void)
+{
+ return subsys_system_register(&s3c2410_subsys, NULL);
+}
+
+core_initcall(s3c2410_core_init);
+
+static int __init s3c2410a_core_init(void)
+{
+ return subsys_system_register(&s3c2410a_subsys, NULL);
+}
+
+core_initcall(s3c2410a_core_init);
+
+int __init s3c2410_init(void)
+{
+ printk("S3C2410: Initialising architecture\n");
+
+#ifdef CONFIG_PM_SLEEP
+ register_syscore_ops(&s3c2410_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+#endif
+
+ return device_register(&s3c2410_dev);
+}
+
+int __init s3c2410a_init(void)
+{
+ s3c2410_dev.bus = &s3c2410a_subsys;
+ return s3c2410_init();
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H
+#define __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H __FILE__
+
+#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20)
+#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24)
+
+#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70)
+#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74)
+#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78)
+#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C)
+
+#define S3C2412_PWRCFG_BATF_IRQ (1 << 0)
+#define S3C2412_PWRCFG_BATF_IGNORE (2 << 0)
+#define S3C2412_PWRCFG_BATF_SLEEP (3 << 0)
+#define S3C2412_PWRCFG_BATF_MASK (3 << 0)
+
+#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_STOP (2 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_MASK (3 << 6)
+
+#define S3C2412_PWRCFG_RTC_MASKIRQ (1 << 8)
+#define S3C2412_PWRCFG_NAND_NORST (1 << 9)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2006 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// http://armlinux.simtec.co.uk/.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
+#include <asm/system_misc.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+
+#include "s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "regs-dsc-s3c24xx.h"
+#include "s3c2412-power.h"
+
+#ifndef CONFIG_CPU_S3C2412_ONLY
+void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
+
+static inline void s3c2412_init_gpio2(void)
+{
+ s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
+}
+#else
+#define s3c2412_init_gpio2() do { } while(0)
+#endif
+
+/* Initial IO mappings */
+
+static struct map_desc s3c2412_iodesc[] __initdata = {
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(WATCHDOG),
+ {
+ .virtual = (unsigned long)S3C2412_VA_SSMC,
+ .pfn = __phys_to_pfn(S3C2412_PA_SSMC),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)S3C2412_VA_EBI,
+ .pfn = __phys_to_pfn(S3C2412_PA_EBI),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+};
+
+/* uart registration process */
+
+void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
+
+ /* rename devices that are s3c2412/s3c2413 specific */
+ s3c_device_sdi.name = "s3c2412-sdi";
+ s3c_device_lcd.name = "s3c2412-lcd";
+ s3c_nand_setname("s3c2412-nand");
+
+ /* alter IRQ of SDI controller */
+
+ s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI;
+ s3c_device_sdi.resource[1].end = IRQ_S3C2412_SDI;
+
+ /* spi channel related changes, s3c2412/13 specific */
+ s3c_device_spi0.name = "s3c2412-spi";
+ s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24;
+ s3c_device_spi1.name = "s3c2412-spi";
+ s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1;
+ s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24;
+
+}
+
+/* s3c2412_idle
+ *
+ * use the standard idle call by ensuring the idle mode
+ * in power config, then issuing the idle co-processor
+ * instruction
+*/
+
+static void s3c2412_idle(void)
+{
+ unsigned long tmp;
+
+ /* ensure our idle mode is to go to idle */
+
+ tmp = __raw_readl(S3C2412_PWRCFG);
+ tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+ tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
+ __raw_writel(tmp, S3C2412_PWRCFG);
+
+ cpu_do_idle();
+}
+
+/* s3c2412_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+*/
+
+void __init s3c2412_map_io(void)
+{
+ /* move base of IO */
+
+ s3c2412_init_gpio2();
+
+ /* set our idle function */
+
+ arm_pm_idle = s3c2412_idle;
+
+ /* register our io-tables */
+
+ iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
+}
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2412 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+struct bus_type s3c2412_subsys = {
+ .name = "s3c2412-core",
+ .dev_name = "s3c2412-core",
+};
+
+static int __init s3c2412_core_init(void)
+{
+ return subsys_system_register(&s3c2412_subsys, NULL);
+}
+
+core_initcall(s3c2412_core_init);
+
+static struct device s3c2412_dev = {
+ .bus = &s3c2412_subsys,
+};
+
+int __init s3c2412_init(void)
+{
+ printk("S3C2412: Initialising architecture\n");
+
+#ifdef CONFIG_PM_SLEEP
+ register_syscore_ops(&s3c2412_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+#endif
+
+ return device_register(&s3c2412_dev);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+// as part of OpenInkpot project
+// Copyright (c) 2009 Promwad Innovation Company
+// Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+//
+// Samsung S3C2416 Mobile CPU support
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+#include <mach/gpio-samsung.h>
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
+#include <asm/system_misc.h>
+
+#include <mach/regs-s3c2443-clock.h>
+#include <mach/rtc-core-s3c24xx.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/sdhci.h>
+#include <plat/pm.h>
+
+#include <plat/iic-core.h>
+#include <plat/adc-core.h>
+
+#include "s3c24xx.h"
+#include "fb-core-s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "spi-core-s3c24xx.h"
+
+static struct map_desc s3c2416_iodesc[] __initdata = {
+ IODESC_ENT(WATCHDOG),
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+};
+
+struct bus_type s3c2416_subsys = {
+ .name = "s3c2416-core",
+ .dev_name = "s3c2416-core",
+};
+
+static struct device s3c2416_dev = {
+ .bus = &s3c2416_subsys,
+};
+
+int __init s3c2416_init(void)
+{
+ printk(KERN_INFO "S3C2416: Initializing architecture\n");
+
+ /* change WDT IRQ number */
+ s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
+ s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+
+ s3c_fb_setname("s3c2443-fb");
+
+ s3c_adc_setname("s3c2416-adc");
+ s3c_rtc_setname("s3c2416-rtc");
+
+#ifdef CONFIG_PM_SLEEP
+ register_syscore_ops(&s3c2416_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+ register_syscore_ops(&s3c2416_irq_syscore_ops);
+#endif
+
+ return device_register(&s3c2416_dev);
+}
+
+void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+
+ s3c_nand_setname("s3c2412-nand");
+}
+
+/* s3c2416_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2416_map_io(void)
+{
+ s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
+ s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
+
+ /* initialize device information early */
+ s3c2416_default_sdhci0();
+ s3c2416_default_sdhci1();
+ s3c24xx_spi_setname("s3c2443-spi");
+
+ iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
+}
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2416 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2416_core_init(void)
+{
+ return subsys_system_register(&s3c2416_subsys, NULL);
+}
+
+core_initcall(s3c2416_core_init);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2004-2006 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// Samsung S3C2440 Mobile CPU support
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/gpio-samsung.h>
+#include <asm/irq.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+#include "s3c24xx.h"
+
+static struct device s3c2440_dev = {
+ .bus = &s3c2440_subsys,
+};
+
+int __init s3c2440_init(void)
+{
+ printk("S3C2440: Initialising architecture\n");
+
+ /* change irq for watchdog */
+
+ s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
+ s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT;
+
+ /* register suspend/resume handlers */
+
+#ifdef CONFIG_PM_SLEEP
+ register_syscore_ops(&s3c2410_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+ register_syscore_ops(&s3c244x_pm_syscore_ops);
+#endif
+
+ /* register our system device for everything else */
+
+ return device_register(&s3c2440_dev);
+}
+
+void __init s3c2440_map_io(void)
+{
+ s3c244x_map_io();
+
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2004-2005 Simtec Electronics
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>
+//
+// S3C2442 core and lock support
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/gpio-samsung.h>
+#include <linux/atomic.h>
+#include <asm/irq.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+#include "s3c24xx.h"
+
+static struct device s3c2442_dev = {
+ .bus = &s3c2442_subsys,
+};
+
+int __init s3c2442_init(void)
+{
+ printk("S3C2442: Initialising architecture\n");
+
+#ifdef CONFIG_PM_SLEEP
+ register_syscore_ops(&s3c2410_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+ register_syscore_ops(&s3c244x_pm_syscore_ops);
+#endif
+
+ return device_register(&s3c2442_dev);
+}
+
+void __init s3c2442_map_io(void)
+{
+ s3c244x_map_io();
+
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2007 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// Samsung S3C2443 Mobile CPU support
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
+#include <asm/irq.h>
+#include <asm/system_misc.h>
+
+#include <mach/regs-s3c2443-clock.h>
+#include <mach/rtc-core-s3c24xx.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/adc-core.h>
+
+#include "s3c24xx.h"
+#include "fb-core-s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "spi-core-s3c24xx.h"
+
+static struct map_desc s3c2443_iodesc[] __initdata = {
+ IODESC_ENT(WATCHDOG),
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+};
+
+struct bus_type s3c2443_subsys = {
+ .name = "s3c2443-core",
+ .dev_name = "s3c2443-core",
+};
+
+static struct device s3c2443_dev = {
+ .bus = &s3c2443_subsys,
+};
+
+int __init s3c2443_init(void)
+{
+ printk("S3C2443: Initialising architecture\n");
+
+ s3c_nand_setname("s3c2412-nand");
+ s3c_fb_setname("s3c2443-fb");
+
+ s3c_adc_setname("s3c2443-adc");
+ s3c_rtc_setname("s3c2443-rtc");
+
+ /* change WDT IRQ number */
+ s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
+ s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
+
+ return device_register(&s3c2443_dev);
+}
+
+void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+/* s3c2443_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2443_map_io(void)
+{
+ s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
+ s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
+
+ /* initialize device information early */
+ s3c24xx_spi_setname("s3c2443-spi");
+
+ iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
+}
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2443 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2443_core_init(void)
+{
+ return subsys_system_register(&s3c2443_subsys, NULL);
+}
+
+core_initcall(s3c2443_core_init);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2004-2006 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/system_misc.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include "s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "regs-dsc-s3c24xx.h"
+
+static struct map_desc s3c244x_iodesc[] __initdata = {
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(WATCHDOG),
+};
+
+/* uart initialisation */
+
+void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+void __init s3c244x_map_io(void)
+{
+ /* register our io-tables */
+
+ iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
+
+ /* rename any peripherals used differing from the s3c2410 */
+
+ s3c_device_sdi.name = "s3c2440-sdi";
+ s3c_device_i2c0.name = "s3c2440-i2c";
+ s3c_nand_setname("s3c2440-nand");
+ s3c_device_ts.name = "s3c2440-ts";
+ s3c_device_usbgadget.name = "s3c2440-usbgadget";
+ s3c2410_device_dclk.name = "s3c2440-dclk";
+}
+
+/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
+
+struct bus_type s3c2440_subsys = {
+ .name = "s3c2440-core",
+ .dev_name = "s3c2440-core",
+};
+
+struct bus_type s3c2442_subsys = {
+ .name = "s3c2442-core",
+ .dev_name = "s3c2442-core",
+};
+
+/* need to register the subsystem before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2440 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+static int __init s3c2440_core_init(void)
+{
+ return subsys_system_register(&s3c2440_subsys, NULL);
+}
+
+core_initcall(s3c2440_core_init);
+
+static int __init s3c2442_core_init(void)
+{
+ return subsys_system_register(&s3c2442_subsys, NULL);
+}
+
+core_initcall(s3c2442_core_init);
+
+
+#ifdef CONFIG_PM_SLEEP
+static struct sleep_save s3c244x_sleep[] = {
+ SAVE_ITEM(S3C2440_DSC0),
+ SAVE_ITEM(S3C2440_DSC1),
+ SAVE_ITEM(S3C2440_GPJDAT),
+ SAVE_ITEM(S3C2440_GPJCON),
+ SAVE_ITEM(S3C2440_GPJUP)
+};
+
+static int s3c244x_suspend(void)
+{
+ s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+ return 0;
+}
+
+static void s3c244x_resume(void)
+{
+ s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+}
+
+struct syscore_ops s3c244x_pm_syscore_ops = {
+ .suspend = s3c244x_suspend,
+ .resume = s3c244x_resume,
+};
+#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2004-2005 Simtec Electronics
+// http://www.simtec.co.uk/products/SWLINUX/
+// Ben Dooks <ben@simtec.co.uk>
+//
+// Common code for S3C24XX machines
+
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <clocksource/samsung_pwm.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/platform_data/clk-s3c2410.h>
+#include <linux/platform_data/dma-s3c24xx.h>
+#include <linux/dmaengine.h>
+#include <linux/clk/samsung.h>
+
+#include <mach/hardware-s3c24xx.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <asm/irq.h>
+#include <asm/cacheflush.h>
+#include <asm/system_info.h>
+#include <asm/system_misc.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/dma.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/pwm-core.h>
+
+#include "s3c24xx.h"
+
+/* table of supported CPUs */
+
+static const char name_s3c2410[] = "S3C2410";
+static const char name_s3c2412[] = "S3C2412";
+static const char name_s3c2416[] = "S3C2416/S3C2450";
+static const char name_s3c2440[] = "S3C2440";
+static const char name_s3c2442[] = "S3C2442";
+static const char name_s3c2442b[] = "S3C2442B";
+static const char name_s3c2443[] = "S3C2443";
+static const char name_s3c2410a[] = "S3C2410A";
+static const char name_s3c2440a[] = "S3C2440A";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = 0x32410000,
+ .idmask = 0xffffffff,
+ .map_io = s3c2410_map_io,
+ .init_uarts = s3c2410_init_uarts,
+ .init = s3c2410_init,
+ .name = name_s3c2410
+ },
+ {
+ .idcode = 0x32410002,
+ .idmask = 0xffffffff,
+ .map_io = s3c2410_map_io,
+ .init_uarts = s3c2410_init_uarts,
+ .init = s3c2410a_init,
+ .name = name_s3c2410a
+ },
+ {
+ .idcode = 0x32440000,
+ .idmask = 0xffffffff,
+ .map_io = s3c2440_map_io,
+ .init_uarts = s3c244x_init_uarts,
+ .init = s3c2440_init,
+ .name = name_s3c2440
+ },
+ {
+ .idcode = 0x32440001,
+ .idmask = 0xffffffff,
+ .map_io = s3c2440_map_io,
+ .init_uarts = s3c244x_init_uarts,
+ .init = s3c2440_init,
+ .name = name_s3c2440a
+ },
+ {
+ .idcode = 0x32440aaa,
+ .idmask = 0xffffffff,
+ .map_io = s3c2442_map_io,
+ .init_uarts = s3c244x_init_uarts,
+ .init = s3c2442_init,
+ .name = name_s3c2442
+ },
+ {
+ .idcode = 0x32440aab,
+ .idmask = 0xffffffff,
+ .map_io = s3c2442_map_io,
+ .init_uarts = s3c244x_init_uarts,
+ .init = s3c2442_init,
+ .name = name_s3c2442b
+ },
+ {
+ .idcode = 0x32412001,
+ .idmask = 0xffffffff,
+ .map_io = s3c2412_map_io,
+ .init_uarts = s3c2412_init_uarts,
+ .init = s3c2412_init,
+ .name = name_s3c2412,
+ },
+ { /* a newer version of the s3c2412 */
+ .idcode = 0x32412003,
+ .idmask = 0xffffffff,
+ .map_io = s3c2412_map_io,
+ .init_uarts = s3c2412_init_uarts,
+ .init = s3c2412_init,
+ .name = name_s3c2412,
+ },
+ { /* a strange version of the s3c2416 */
+ .idcode = 0x32450003,
+ .idmask = 0xffffffff,
+ .map_io = s3c2416_map_io,
+ .init_uarts = s3c2416_init_uarts,
+ .init = s3c2416_init,
+ .name = name_s3c2416,
+ },
+ {
+ .idcode = 0x32443001,
+ .idmask = 0xffffffff,
+ .map_io = s3c2443_map_io,
+ .init_uarts = s3c2443_init_uarts,
+ .init = s3c2443_init,
+ .name = name_s3c2443,
+ },
+};
+
+/* minimal IO mapping */
+
+static struct map_desc s3c_iodesc[] __initdata = {
+ IODESC_ENT(GPIO),
+ IODESC_ENT(IRQ),
+ IODESC_ENT(MEMCTRL),
+ IODESC_ENT(UART)
+};
+
+/* read cpu identificaiton code */
+
+static unsigned long s3c24xx_read_idcode_v5(void)
+{
+#if defined(CONFIG_CPU_S3C2416)
+ /* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */
+
+ u32 gs = __raw_readl(S3C24XX_GSTATUS1);
+
+ /* test for s3c2416 or similar device */
+ if ((gs >> 16) == 0x3245)
+ return gs;
+#endif
+
+#if defined(CONFIG_CPU_S3C2412)
+ return __raw_readl(S3C2412_GSTATUS1);
+#else
+ return 1UL; /* don't look like an 2400 */
+#endif
+}
+
+static unsigned long s3c24xx_read_idcode_v4(void)
+{
+ return __raw_readl(S3C2410_GSTATUS1);
+}
+
+static void s3c24xx_default_idle(void)
+{
+ unsigned long tmp = 0;
+ int i;
+
+ /* idle the system by using the idle mode which will wait for an
+ * interrupt to happen before restarting the system.
+ */
+
+ /* Warning: going into idle state upsets jtag scanning */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+
+ /* the samsung port seems to do a loop and then unset idle.. */
+ for (i = 0; i < 50; i++)
+ tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+
+ /* this bit is not cleared on re-start... */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+}
+
+static struct samsung_pwm_variant s3c24xx_pwm_variant = {
+ .bits = 16,
+ .div_base = 1,
+ .has_tint_cstat = false,
+ .tclk_mask = (1 << 4),
+};
+
+void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
+{
+ arm_pm_idle = s3c24xx_default_idle;
+
+ /* initialise the io descriptors we need for initialisation */
+ iotable_init(mach_desc, size);
+ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+
+ if (cpu_architecture() >= CPU_ARCH_ARMv5) {
+ samsung_cpu_id = s3c24xx_read_idcode_v5();
+ } else {
+ samsung_cpu_id = s3c24xx_read_idcode_v4();
+ }
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+ samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
+}
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+ s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
+ };
+
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &s3c24xx_pwm_variant);
+}
+
+/* Serial port registrations */
+
+#define S3C2410_PA_UART0 (S3C24XX_PA_UART)
+#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 )
+#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 )
+#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 )
+
+static struct resource s3c2410_uart0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K),
+ [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \
+ IRQ_S3CUART_ERR0 - IRQ_S3CUART_RX0 + 1, \
+ NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_PA_UART1, SZ_16K),
+ [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX1, \
+ IRQ_S3CUART_ERR1 - IRQ_S3CUART_RX1 + 1, \
+ NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart2_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_PA_UART2, SZ_16K),
+ [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX2, \
+ IRQ_S3CUART_ERR2 - IRQ_S3CUART_RX2 + 1, \
+ NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart3_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2443_PA_UART3, SZ_16K),
+ [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX3, \
+ IRQ_S3CUART_ERR3 - IRQ_S3CUART_RX3 + 1, \
+ NULL, IORESOURCE_IRQ)
+};
+
+struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
+ [0] = {
+ .resources = s3c2410_uart0_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
+ },
+ [1] = {
+ .resources = s3c2410_uart1_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
+ },
+ [2] = {
+ .resources = s3c2410_uart2_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
+ },
+ [3] = {
+ .resources = s3c2410_uart3_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
+ },
+};
+
+#define s3c24xx_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+ defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dma_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+ [1] = DEFINE_RES_IRQ(IRQ_DMA0),
+ [2] = DEFINE_RES_IRQ(IRQ_DMA1),
+ [3] = DEFINE_RES_IRQ(IRQ_DMA2),
+ [4] = DEFINE_RES_IRQ(IRQ_DMA3),
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442)
+static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
+ [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
+ [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
+ [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
+ S3C24XX_DMA_CHANREQ(2, 2) |
+ S3C24XX_DMA_CHANREQ(1, 3),
+ },
+ [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
+ [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
+ [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
+ [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
+ [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
+ [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
+ S3C24XX_DMA_CHANREQ(3, 2) |
+ S3C24XX_DMA_CHANREQ(3, 3),
+ },
+ [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
+ S3C24XX_DMA_CHANREQ(1, 2),
+ },
+ [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), },
+ [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
+ [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
+ [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
+ [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
+};
+
+static const struct dma_slave_map s3c2410_dma_slave_map[] = {
+ { "s3c2410-sdi", "rx-tx", (void *)DMACH_SDI },
+ { "s3c2410-spi.0", "rx", (void *)DMACH_SPI0_RX },
+ { "s3c2410-spi.0", "tx", (void *)DMACH_SPI0_TX },
+ { "s3c2410-spi.1", "rx", (void *)DMACH_SPI1_RX },
+ { "s3c2410-spi.1", "tx", (void *)DMACH_SPI1_TX },
+ /*
+ * The DMA request source[1] (DMACH_UARTx_SRC2) are
+ * not used in the UART driver.
+ */
+ { "s3c2410-uart.0", "rx", (void *)DMACH_UART0 },
+ { "s3c2410-uart.0", "tx", (void *)DMACH_UART0 },
+ { "s3c2410-uart.1", "rx", (void *)DMACH_UART1 },
+ { "s3c2410-uart.1", "tx", (void *)DMACH_UART1 },
+ { "s3c2410-uart.2", "rx", (void *)DMACH_UART2 },
+ { "s3c2410-uart.2", "tx", (void *)DMACH_UART2 },
+ { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
+ { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
+ { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
+ { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
+};
+
+static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
+ .num_phy_channels = 4,
+ .channels = s3c2410_dma_channels,
+ .num_channels = DMACH_MAX,
+ .slave_map = s3c2410_dma_slave_map,
+ .slavecnt = ARRAY_SIZE(s3c2410_dma_slave_map),
+};
+
+struct platform_device s3c2410_device_dma = {
+ .name = "s3c2410-dma",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c2410_dma_resource),
+ .resource = s3c2410_dma_resource,
+ .dev = {
+ .dma_mask = &s3c24xx_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c2410_dma_platdata,
+ },
+};
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
+ [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+ [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+ [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+ [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+ [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+ [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+ [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+ [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+ [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+ [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+ [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+ [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+ [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+ [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+ [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+ [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+ [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 },
+ [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 },
+ [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 },
+ [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
+};
+
+static const struct dma_slave_map s3c2412_dma_slave_map[] = {
+ { "s3c2412-sdi", "rx-tx", (void *)DMACH_SDI },
+ { "s3c2412-spi.0", "rx", (void *)DMACH_SPI0_RX },
+ { "s3c2412-spi.0", "tx", (void *)DMACH_SPI0_TX },
+ { "s3c2412-spi.1", "rx", (void *)DMACH_SPI1_RX },
+ { "s3c2412-spi.1", "tx", (void *)DMACH_SPI1_TX },
+ { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
+ { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
+ { "s3c2412-iis", "rx", (void *)DMACH_I2S_IN },
+ { "s3c2412-iis", "tx", (void *)DMACH_I2S_OUT },
+ { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
+ { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
+};
+
+static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
+ .num_phy_channels = 4,
+ .channels = s3c2412_dma_channels,
+ .num_channels = DMACH_MAX,
+ .slave_map = s3c2412_dma_slave_map,
+ .slavecnt = ARRAY_SIZE(s3c2412_dma_slave_map),
+};
+
+struct platform_device s3c2412_device_dma = {
+ .name = "s3c2412-dma",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c2410_dma_resource),
+ .resource = s3c2410_dma_resource,
+ .dev = {
+ .dma_mask = &s3c24xx_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c2412_dma_platdata,
+ },
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2440)
+static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
+ [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
+ [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
+ [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
+ S3C24XX_DMA_CHANREQ(6, 1) |
+ S3C24XX_DMA_CHANREQ(2, 2) |
+ S3C24XX_DMA_CHANREQ(1, 3),
+ },
+ [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
+ [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
+ [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
+ [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
+ [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
+ [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
+ S3C24XX_DMA_CHANREQ(3, 2) |
+ S3C24XX_DMA_CHANREQ(3, 3),
+ },
+ [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
+ S3C24XX_DMA_CHANREQ(1, 2),
+ },
+ [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) |
+ S3C24XX_DMA_CHANREQ(0, 2),
+ },
+ [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) |
+ S3C24XX_DMA_CHANREQ(5, 2),
+ },
+ [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) |
+ S3C24XX_DMA_CHANREQ(6, 3),
+ },
+ [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) |
+ S3C24XX_DMA_CHANREQ(5, 3),
+ },
+ [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
+ [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
+ [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
+ [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
+};
+
+static const struct dma_slave_map s3c2440_dma_slave_map[] = {
+ /* TODO: DMACH_XD0 */
+ /* TODO: DMACH_XD1 */
+ { "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
+ { "s3c2410-spi.0", "rx", (void *)DMACH_SPI0 },
+ { "s3c2410-spi.0", "tx", (void *)DMACH_SPI0 },
+ { "s3c2410-spi.1", "rx", (void *)DMACH_SPI1 },
+ { "s3c2410-spi.1", "tx", (void *)DMACH_SPI1 },
+ { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
+ { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
+ { "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
+ { "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
+ /* TODO: DMACH_TIMER */
+ { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
+ { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
+ { "samsung-ac97", "rx", (void *)DMACH_PCM_IN },
+ { "samsung-ac97", "tx", (void *)DMACH_PCM_OUT },
+ { "samsung-ac97", "rx", (void *)DMACH_MIC_IN },
+ { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
+ { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
+};
+
+static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
+ .num_phy_channels = 4,
+ .channels = s3c2440_dma_channels,
+ .num_channels = DMACH_MAX,
+ .slave_map = s3c2440_dma_slave_map,
+ .slavecnt = ARRAY_SIZE(s3c2440_dma_slave_map),
+};
+
+struct platform_device s3c2440_device_dma = {
+ .name = "s3c2410-dma",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c2410_dma_resource),
+ .resource = s3c2410_dma_resource,
+ .dev = {
+ .dma_mask = &s3c24xx_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c2440_dma_platdata,
+ },
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+static struct resource s3c2443_dma_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+ [1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
+ [2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
+ [3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
+ [4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
+ [5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
+ [6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
+};
+
+static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
+ [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+ [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+ [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+ [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+ [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+ [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+ [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+ [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+ [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+ [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+ [DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 },
+ [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+ [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+ [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+ [DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 },
+ [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+ [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+ [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+ [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 },
+ [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 },
+ [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
+};
+
+static const struct dma_slave_map s3c2443_dma_slave_map[] = {
+ { "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
+ { "s3c2443-spi.0", "rx", (void *)DMACH_SPI0_RX },
+ { "s3c2443-spi.0", "tx", (void *)DMACH_SPI0_TX },
+ { "s3c2443-spi.1", "rx", (void *)DMACH_SPI1_RX },
+ { "s3c2443-spi.1", "tx", (void *)DMACH_SPI1_TX },
+ { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
+ { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
+ { "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
+ { "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
+ { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
+ { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
+};
+
+static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
+ .num_phy_channels = 6,
+ .channels = s3c2443_dma_channels,
+ .num_channels = DMACH_MAX,
+ .slave_map = s3c2443_dma_slave_map,
+ .slavecnt = ARRAY_SIZE(s3c2443_dma_slave_map),
+};
+
+struct platform_device s3c2443_device_dma = {
+ .name = "s3c2443-dma",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c2443_dma_resource),
+ .resource = s3c2443_dma_resource,
+ .dev = {
+ .dma_mask = &s3c24xx_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c2443_dma_platdata,
+ },
+};
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410)
+void __init s3c2410_init_clocks(int xtal)
+{
+ s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+void __init s3c2412_init_clocks(int xtal)
+{
+ s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+void __init s3c2416_init_clocks(int xtal)
+{
+ s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440)
+void __init s3c2440_init_clocks(int xtal)
+{
+ s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442)
+void __init s3c2442_init_clocks(int xtal)
+{
+ s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+void __init s3c2443_init_clocks(int xtal)
+{
+ s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \
+ defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dclk_resource[] = {
+ [0] = DEFINE_RES_MEM(0x56000084, 0x4),
+};
+
+static struct s3c2410_clk_platform_data s3c_clk_platform_data = {
+ .modify_misccr = s3c2410_modify_misccr,
+};
+
+struct platform_device s3c2410_device_dclk = {
+ .name = "s3c2410-dclk",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c2410_dclk_resource),
+ .resource = s3c2410_dclk_resource,
+ .dev = {
+ .platform_data = &s3c_clk_platform_data,
+ },
+};
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S3C24XX SoCs
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
+#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
+
+#include <linux/reboot.h>
+#include <mach/irqs.h>
+
+struct s3c2410_uartcfg;
+
+#ifdef CONFIG_CPU_S3C2410
+extern int s3c2410_init(void);
+extern int s3c2410a_init(void);
+extern void s3c2410_map_io(void);
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2410_init_clocks(int xtal);
+extern void s3c2410_init_irq(void);
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#define s3c2410a_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+extern int s3c2412_init(void);
+extern void s3c2412_map_io(void);
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2412_init_clocks(int xtal);
+extern int s3c2412_baseclk_add(void);
+extern void s3c2412_init_irq(void);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+extern int s3c2416_init(void);
+extern void s3c2416_map_io(void);
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2416_init_clocks(int xtal);
+extern int s3c2416_baseclk_add(void);
+extern void s3c2416_init_irq(void);
+
+extern struct syscore_ops s3c2416_irq_syscore_ops;
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+extern void s3c244x_map_io(void);
+extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+#else
+#define s3c244x_init_uarts NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern int s3c2440_init(void);
+extern void s3c2440_map_io(void);
+extern void s3c2440_init_clocks(int xtal);
+extern void s3c2440_init_irq(void);
+#else
+#define s3c2440_init NULL
+#define s3c2440_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern int s3c2442_init(void);
+extern void s3c2442_map_io(void);
+extern void s3c2442_init_clocks(int xtal);
+extern void s3c2442_init_irq(void);
+#else
+#define s3c2442_init NULL
+#define s3c2442_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+extern int s3c2443_init(void);
+extern void s3c2443_map_io(void);
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2443_init_clocks(int xtal);
+extern int s3c2443_baseclk_add(void);
+extern void s3c2443_init_irq(void);
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
+
+extern struct syscore_ops s3c24xx_irq_syscore_ops;
+
+extern struct platform_device s3c2410_device_dma;
+extern struct platform_device s3c2412_device_dma;
+extern struct platform_device s3c2440_device_dma;
+extern struct platform_device s3c2443_device_dma;
+
+extern struct platform_device s3c2410_device_dclk;
+
+enum samsung_timer_mode {
+ SAMSUNG_PWM0,
+ SAMSUNG_PWM1,
+ SAMSUNG_PWM2,
+ SAMSUNG_PWM3,
+ SAMSUNG_PWM4,
+};
+
+extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
+ enum samsung_timer_mode source);
+extern void __init samsung_timer_init(void);
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2009 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+
+#include "s3c64xx.h"
+#include "onenand-core-s3c64xx.h"
+
+void __init s3c6400_map_io(void)
+{
+ /* setup SDHCI */
+
+ s3c6400_default_sdhci0();
+ s3c6400_default_sdhci1();
+ s3c6400_default_sdhci2();
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+
+ s3c_device_nand.name = "s3c6400-nand";
+
+ s3c_onenand_setname("s3c6400-onenand");
+ s3c64xx_onenand1_setname("s3c6400-onenand");
+}
+
+void __init s3c6400_init_irq(void)
+{
+ /* VIC0 does not have IRQS 5..7,
+ * VIC1 is fully populated. */
+ s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
+}
+
+static struct bus_type s3c6400_subsys = {
+ .name = "s3c6400-core",
+ .dev_name = "s3c6400-core",
+};
+
+static struct device s3c6400_dev = {
+ .bus = &s3c6400_subsys,
+};
+
+static int __init s3c6400_core_init(void)
+{
+ /* Not applicable when using DT. */
+ if (of_have_populated_dt() || soc_is_s3c64xx())
+ return 0;
+
+ return subsys_system_register(&s3c6400_subsys, NULL);
+}
+
+core_initcall(s3c6400_core_init);
+
+int __init s3c6400_init(void)
+{
+ printk("S3C6400: Initialising architecture\n");
+
+ return device_register(&s3c6400_dev);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Simtec Electronics
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+
+#include <linux/soc/samsung/s3c-pm.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/adc-core.h>
+#include <plat/iic-core.h>
+
+#include "ata-core-s3c64xx.h"
+#include "s3c64xx.h"
+#include "onenand-core-s3c64xx.h"
+
+void __init s3c6410_map_io(void)
+{
+ /* initialise device information early */
+ s3c6410_default_sdhci0();
+ s3c6410_default_sdhci1();
+ s3c6410_default_sdhci2();
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+
+ s3c_adc_setname("s3c64xx-adc");
+ s3c_device_nand.name = "s3c6400-nand";
+ s3c_onenand_setname("s3c6410-onenand");
+ s3c64xx_onenand1_setname("s3c6410-onenand");
+ s3c_cfcon_setname("s3c64xx-pata");
+}
+
+void __init s3c6410_init_irq(void)
+{
+ /* VIC0 is missing IRQ7, VIC1 is fully populated. */
+ s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
+}
+
+struct bus_type s3c6410_subsys = {
+ .name = "s3c6410-core",
+ .dev_name = "s3c6410-core",
+};
+
+static struct device s3c6410_dev = {
+ .bus = &s3c6410_subsys,
+};
+
+static int __init s3c6410_core_init(void)
+{
+ /* Not applicable when using DT. */
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
+ return 0;
+
+ return subsys_system_register(&s3c6410_subsys, NULL);
+}
+
+core_initcall(s3c6410_core_init);
+
+int __init s3c6410_init(void)
+{
+ printk("S3C6410: Initialising architecture\n");
+
+ return device_register(&s3c6410_dev);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011 Samsung Electronics Co., Ltd.
+// http://www.samsung.com
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// Common Codes for S3C64XX machines
+
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/io.h>
+#include <linux/clk/samsung.h>
+#include <linux/dma-mapping.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/irqchip/arm-vic.h>
+#include <clocksource/samsung_pwm.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/gpio-cfg.h>
+#include <plat/pwm-core.h>
+#include <plat/regs-irqtype.h>
+
+#include "s3c64xx.h"
+#include "irq-uart-s3c64xx.h"
+
+/* External clock frequency */
+static unsigned long xtal_f __ro_after_init = 12000000;
+static unsigned long xusbxti_f __ro_after_init = 48000000;
+
+void __init s3c64xx_set_xtal_freq(unsigned long freq)
+{
+ xtal_f = freq;
+}
+
+void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
+{
+ xusbxti_f = freq;
+}
+
+/* uart registration process */
+
+static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
+
+/* table of supported CPUs */
+
+static const char name_s3c6400[] = "S3C6400";
+static const char name_s3c6410[] = "S3C6410";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S3C6400_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
+ .map_io = s3c6400_map_io,
+ .init_uarts = s3c64xx_init_uarts,
+ .init = s3c6400_init,
+ .name = name_s3c6400,
+ }, {
+ .idcode = S3C6410_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
+ .map_io = s3c6410_map_io,
+ .init_uarts = s3c64xx_init_uarts,
+ .init = s3c6410_init,
+ .name = name_s3c6410,
+ },
+};
+
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xfffff)
+
+static struct map_desc s3c_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_MEM,
+ .pfn = __phys_to_pfn(S3C64XX_PA_SROM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS),
+ .pfn = __phys_to_pfn(S3C_PA_UART),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC0,
+ .pfn = __phys_to_pfn(S3C64XX_PA_VIC0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC1,
+ .pfn = __phys_to_pfn(S3C64XX_PA_VIC1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S3C_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C64XX_VA_GPIO,
+ .pfn = __phys_to_pfn(S3C64XX_PA_GPIO),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C64XX_VA_MODEM,
+ .pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
+ .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+ .length = SZ_1K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct bus_type s3c64xx_subsys = {
+ .name = "s3c64xx-core",
+ .dev_name = "s3c64xx-core",
+};
+
+static struct device s3c64xx_dev = {
+ .bus = &s3c64xx_subsys,
+};
+
+static struct samsung_pwm_variant s3c64xx_pwm_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
+};
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+ s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+ IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+ };
+
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &s3c64xx_pwm_variant);
+}
+
+/* read cpu identification code */
+
+void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialise the io descriptors we need for initialisation */
+ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+ iotable_init(mach_desc, size);
+
+ /* detect cpu id */
+ s3c64xx_init_cpu();
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+ samsung_pwm_set_platdata(&s3c64xx_pwm_variant);
+}
+
+static __init int s3c64xx_dev_init(void)
+{
+ /* Not applicable when using DT. */
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
+ return 0;
+
+ subsys_system_register(&s3c64xx_subsys, NULL);
+ return device_register(&s3c64xx_dev);
+}
+core_initcall(s3c64xx_dev_init);
+
+/*
+ * setup the sources the vic should advertise resume
+ * for, even though it is not doing the wake
+ * (set_irq_wake needs to be valid)
+ */
+#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
+#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+ s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
+
+ printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+ /* initialise the pair of VICs */
+ vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
+ vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
+}
+
+#define eint_offset(irq) ((irq) - IRQ_EINT(0))
+#define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq)))
+
+static inline void s3c_irq_eint_mask(struct irq_data *data)
+{
+ u32 mask;
+
+ mask = __raw_readl(S3C64XX_EINT0MASK);
+ mask |= (u32)data->chip_data;
+ __raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static void s3c_irq_eint_unmask(struct irq_data *data)
+{
+ u32 mask;
+
+ mask = __raw_readl(S3C64XX_EINT0MASK);
+ mask &= ~((u32)data->chip_data);
+ __raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static inline void s3c_irq_eint_ack(struct irq_data *data)
+{
+ __raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
+}
+
+static void s3c_irq_eint_maskack(struct irq_data *data)
+{
+ /* compiler should in-line these */
+ s3c_irq_eint_mask(data);
+ s3c_irq_eint_ack(data);
+}
+
+static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+ int offs = eint_offset(data->irq);
+ int pin, pin_val;
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+ void __iomem *reg;
+
+ if (offs > 27)
+ return -EINVAL;
+
+ if (offs <= 15)
+ reg = S3C64XX_EINT0CON0;
+ else
+ reg = S3C64XX_EINT0CON1;
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ printk(KERN_WARNING "No edge setting!\n");
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S3C2410_EXTINT_RISEEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S3C2410_EXTINT_FALLEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S3C2410_EXTINT_BOTHEDGE;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S3C2410_EXTINT_LOWLEV;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S3C2410_EXTINT_HILEV;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -1;
+ }
+
+ if (offs <= 15)
+ shift = (offs / 2) * 4;
+ else
+ shift = ((offs - 16) / 2) * 4;
+ mask = 0x7 << shift;
+
+ ctrl = __raw_readl(reg);
+ ctrl &= ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, reg);
+
+ /* set the GPIO pin appropriately */
+
+ if (offs < 16) {
+ pin = S3C64XX_GPN(offs);
+ pin_val = S3C_GPIO_SFN(2);
+ } else if (offs < 23) {
+ pin = S3C64XX_GPL(offs + 8 - 16);
+ pin_val = S3C_GPIO_SFN(3);
+ } else {
+ pin = S3C64XX_GPM(offs - 23);
+ pin_val = S3C_GPIO_SFN(3);
+ }
+
+ s3c_gpio_cfgpin(pin, pin_val);
+
+ return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+ .name = "s3c-eint",
+ .irq_mask = s3c_irq_eint_mask,
+ .irq_unmask = s3c_irq_eint_unmask,
+ .irq_mask_ack = s3c_irq_eint_maskack,
+ .irq_ack = s3c_irq_eint_ack,
+ .irq_set_type = s3c_irq_eint_set_type,
+ .irq_set_wake = s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+ u32 status = __raw_readl(S3C64XX_EINT0PEND);
+ u32 mask = __raw_readl(S3C64XX_EINT0MASK);
+ unsigned int irq;
+
+ status &= ~mask;
+ status >>= start;
+ status &= (1 << (end - start + 1)) - 1;
+
+ for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+ if (status & 1)
+ generic_handle_irq(irq);
+
+ status >>= 1;
+ }
+}
+
+static void s3c_irq_demux_eint0_3(struct irq_desc *desc)
+{
+ s3c_irq_demux_eint(0, 3);
+}
+
+static void s3c_irq_demux_eint4_11(struct irq_desc *desc)
+{
+ s3c_irq_demux_eint(4, 11);
+}
+
+static void s3c_irq_demux_eint12_19(struct irq_desc *desc)
+{
+ s3c_irq_demux_eint(12, 19);
+}
+
+static void s3c_irq_demux_eint20_27(struct irq_desc *desc)
+{
+ s3c_irq_demux_eint(20, 27);
+}
+
+static int __init s3c64xx_init_irq_eint(void)
+{
+ int irq;
+
+ /* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
+ return -ENODEV;
+
+ for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
+ irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
+ irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
+ irq_clear_status_flags(irq, IRQ_NOREQUEST);
+ }
+
+ irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
+ irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
+ irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
+ irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
+
+ return 0;
+}
+arch_initcall(s3c64xx_init_irq_eint);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Common Header for S3C64XX machines
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C64XX_COMMON_H
+#define __ARCH_ARM_MACH_S3C64XX_COMMON_H
+
+#include <linux/reboot.h>
+
+void s3c64xx_init_irq(u32 vic0, u32 vic1);
+void s3c64xx_init_io(struct map_desc *mach_desc, int size);
+
+struct device_node;
+void s3c64xx_set_xtal_freq(unsigned long freq);
+void s3c64xx_set_xusbxti_freq(unsigned long freq);
+
+#ifdef CONFIG_CPU_S3C6400
+
+extern int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
+extern void s3c6400_map_io(void);
+
+#else
+#define s3c6400_map_io NULL
+#define s3c6400_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C6410
+
+extern int s3c6410_init(void);
+extern void s3c6410_init_irq(void);
+extern void s3c6410_map_io(void);
+
+#else
+#define s3c6410_map_io NULL
+#define s3c6410_init NULL
+#endif
+
+#ifdef CONFIG_S3C64XX_PL080
+extern struct pl08x_platform_data s3c64xx_dma0_plat_data;
+extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
+#endif
+
+/* Samsung HR-Timer Clock mode */
+enum samsung_timer_mode {
+ SAMSUNG_PWM0,
+ SAMSUNG_PWM1,
+ SAMSUNG_PWM2,
+ SAMSUNG_PWM3,
+ SAMSUNG_PWM4,
+};
+
+extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
+ enum samsung_timer_mode source);
+extern void __init samsung_timer_init(void);
+
+#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// Base S3C64XX setup information for 24bpp LCD framebuffer
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
+
+void s3c64xx_fb_gpio_setup_24bpp(void)
+{
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2));
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// S3C24XX Base setup for i2c device
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+struct platform_device;
+
+#include <plat/gpio-cfg.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
+ s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// Base S3C64XX I2C bus 0 gpio configuration
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S3C64XX_GPB(5), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Openmoko, Inc.
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// Base S3C64XX I2C bus 1 gpio configuration
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S3C64XX_GPB(2), 2,
+ S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2010 Samsung Electronics Co., Ltd.
+// http://www.samsung.com/
+//
+// S3C64XX setup information for IDE
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+
+void s3c64xx_ide_setup_gpio(void)
+{
+ u32 reg;
+
+ reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
+
+ /* Independent CF interface, CF chip select configuration */
+ writel(reg | MEM_SYS_CFG_INDEP_CF |
+ MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
+
+ s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
+
+ /* Set XhiDATA[15:0] pins as CF Data[15:0] */
+ s3c_gpio_cfgpin_range(S3C64XX_GPK(0), 16, S3C_GPIO_SFN(5));
+
+ /* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
+ s3c_gpio_cfgpin_range(S3C64XX_GPL(0), 3, S3C_GPIO_SFN(6));
+
+ /* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
+ s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
+ s3c_gpio_cfgpin_range(S3C64XX_GPM(0), 5, S3C_GPIO_SFN(6));
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2010 Samsung Electronics Co., Ltd.
+// http://www.samsung.com/
+//
+// GPIO configuration for S3C64XX KeyPad device
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/keypad.h>
+#include <mach/gpio-samsung.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+ /* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), rows, S3C_GPIO_SFN(3));
+
+ /* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3));
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2010 Promwad Innovation Company
+// Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+//
+// S3C2416 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+//
+// Based on mach-s3c64xx/setup-sdhci-gpio.c
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <plat/gpio-cfg.h>
+#include <plat/sdhci.h>
+
+void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ s3c_gpio_cfgrange_nopull(S3C2410_GPE(5), 2 + width, S3C_GPIO_SFN(2));
+}
+
+void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ s3c_gpio_cfgrange_nopull(S3C2410_GPL(0), width, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(S3C2410_GPL(8), 2, S3C_GPIO_SFN(2));
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2008 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+// http://armlinux.simtec.co.uk/
+//
+// S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/sdhci.h>
+#include <mach/gpio-samsung.h>
+
+void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+ /* Set all the necessary GPG pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+ }
+}
+
+void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+ /* Set all the necessary GPH pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPH(0), 2 + width, S3C_GPIO_SFN(2));
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+ }
+}
+
+void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ /* Set all the necessary GPH pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPH(6), width, S3C_GPIO_SFN(3));
+
+ /* Set all the necessary GPC pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPC(4), 2, S3C_GPIO_SFN(3));
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// HS-SPI device setup for S3C2443/S3C2416
+//
+// Copyright (C) 2011 Samsung Electronics Ltd.
+// http://www.samsung.com/
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+
+#include <mach/hardware-s3c24xx.h>
+#include <mach/regs-gpio.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+int s3c64xx_spi0_cfg_gpio(void)
+{
+ /* enable hsspi bit in misccr */
+ s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+ s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+ return 0;
+}
+#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2011 Samsung Electronics Ltd.
+// http://www.samsung.com/
+
+#include <linux/gpio.h>
+#include <linux/platform_data/spi-s3c64xx.h>
+#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+int s3c64xx_spi0_cfg_gpio(void)
+{
+ s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+int s3c64xx_spi1_cfg_gpio(void)
+{
+ s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2010 Samsung Electronics Co., Ltd.
+// http://www.samsung.com/
+//
+// Based on S3C24XX setup for i2c device
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
+#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
+
+/**
+ * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
+ * @dev: Device to configure GPIO for (ignored)
+ *
+ * Configure the GPIO for the S3C2410 system, where we have external FETs
+ * connected to the device (later systems such as the S3C2440 integrate
+ * these into the device).
+ */
+void s3c24xx_ts_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin_range(S3C2410_GPG(12), 4, S3C_GPIO_SFN(3));
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2011 Samsung Electronics Co.Ltd
+// Author: Joonyoung Shim <jy0922.shim@samsung.com>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/usb-phy.h>
+
+#include "regs-sys-s3c64xx.h"
+#include "regs-usb-hsotg-phy-s3c64xx.h"
+
+enum samsung_usb_phy_type {
+ USB_PHY_TYPE_DEVICE,
+ USB_PHY_TYPE_HOST,
+};
+
+static int s3c_usb_otgphy_init(struct platform_device *pdev)
+{
+ struct clk *xusbxti;
+ u32 phyclk;
+
+ writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
+
+ /* set clock frequency for PLL */
+ phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
+
+ xusbxti = clk_get(&pdev->dev, "xusbxti");
+ if (!IS_ERR(xusbxti)) {
+ switch (clk_get_rate(xusbxti)) {
+ case 12 * MHZ:
+ phyclk |= S3C_PHYCLK_CLKSEL_12M;
+ break;
+ case 24 * MHZ:
+ phyclk |= S3C_PHYCLK_CLKSEL_24M;
+ break;
+ default:
+ case 48 * MHZ:
+ /* default reference clock */
+ break;
+ }
+ clk_put(xusbxti);
+ }
+
+ /* TODO: select external clock/oscillator */
+ writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
+
+ /* set to normal OTG PHY */
+ writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
+ mdelay(1);
+
+ /* reset OTG PHY and Link */
+ writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
+ S3C_RSTCON);
+ udelay(20); /* at-least 10uS */
+ writel(0, S3C_RSTCON);
+
+ return 0;
+}
+
+static int s3c_usb_otgphy_exit(struct platform_device *pdev)
+{
+ writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
+ S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
+
+ writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
+
+ return 0;
+}
+
+int s3c_usb_phy_init(struct platform_device *pdev, int type)
+{
+ if (type == USB_PHY_TYPE_DEVICE)
+ return s3c_usb_otgphy_init(pdev);
+
+ return -EINVAL;
+}
+
+int s3c_usb_phy_exit(struct platform_device *pdev, int type)
+{
+ if (type == USB_PHY_TYPE_DEVICE)
+ return s3c_usb_otgphy_exit(pdev);
+
+ return -EINVAL;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2009 Simtec Electronics
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>
+//
+// Audio setup for various Simtec S3C24XX implementations
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+#include <plat/gpio-cfg.h>
+
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/devs.h>
+
+#include "bast.h"
+#include "simtec.h"
+
+/* platform ops for audio */
+
+static void simtec_audio_startup_lrroute(void)
+{
+ unsigned int tmp;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ tmp = __raw_readb(BAST_VA_CTRL1);
+ tmp &= ~BAST_CPLD_CTRL1_LRMASK;
+ tmp |= BAST_CPLD_CTRL1_LRCDAC;
+ __raw_writeb(tmp, BAST_VA_CTRL1);
+
+ local_irq_restore(flags);
+}
+
+static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata;
+static char our_name[32];
+
+static struct platform_device simtec_audio_dev = {
+ .name = our_name,
+ .id = -1,
+ .dev = {
+ .parent = &s3c_device_iis.dev,
+ .platform_data = &simtec_audio_platdata,
+ },
+};
+
+int __init simtec_audio_add(const char *name, bool has_lr_routing,
+ struct s3c24xx_audio_simtec_pdata *spd)
+{
+ if (!name)
+ name = "tlv320aic23";
+
+ snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name);
+
+ /* copy platform data so the source can be __initdata */
+ if (spd)
+ simtec_audio_platdata = *spd;
+
+ if (has_lr_routing)
+ simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
+
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
+ platform_device_register(&s3c_device_iis);
+ platform_device_register(&simtec_audio_dev);
+ return 0;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2008 Simtec Electronics
+// http://armlinux.simtec.co.uk/
+// Ben Dooks <ben@simtec.co.uk>
+//
+// Simtec NOR mapping
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+
+#include "bast.h"
+#include "simtec.h"
+
+static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
+{
+ unsigned int val;
+
+ val = __raw_readb(BAST_VA_CTRL3);
+
+ printk(KERN_DEBUG "%s(%d)\n", __func__, vpp);
+
+ if (vpp)
+ val |= BAST_CPLD_CTRL3_ROMWEN;
+ else
+ val &= ~BAST_CPLD_CTRL3_ROMWEN;
+
+ __raw_writeb(val, BAST_VA_CTRL3);
+}
+
+static struct physmap_flash_data simtec_nor_pdata = {
+ .width = 2,
+ .set_vpp = simtec_nor_vpp,
+ .nr_parts = 0,
+};
+
+static struct resource simtec_nor_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2410_CS1 + 0x4000000, SZ_8M),
+};
+
+static struct platform_device simtec_device_nor = {
+ .name = "physmap-flash",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(simtec_nor_resource),
+ .resource = simtec_nor_resource,
+ .dev = {
+ .platform_data = &simtec_nor_pdata,
+ },
+};
+
+void __init nor_simtec_init(void)
+{
+ int ret;
+
+ ret = platform_device_register(&simtec_device_nor);
+ if (ret < 0)
+ printk(KERN_ERR "failed to register physmap-flash device\n");
+ else
+ simtec_nor_vpp(NULL, 1);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2004 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// http://armlinux.simtec.co.uk/
+//
+// Power Management helpers for Simtec S3C24XX implementations
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+
+#include <asm/mach-types.h>
+
+#include <plat/pm.h>
+
+#include "regs-mem-s3c24xx.h"
+
+#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
+
+/* pm_simtec_init
+ *
+ * enable the power management functions
+*/
+
+static __init int pm_simtec_init(void)
+{
+ unsigned long gstatus4;
+
+ /* check which machine we are running on */
+
+ if (!machine_is_bast() && !machine_is_vr1000() &&
+ !machine_is_anubis() && !machine_is_osiris() &&
+ !machine_is_aml_m5900())
+ return 0;
+
+ printk(KERN_INFO "Simtec Board Power Management" COPYRIGHT "\n");
+
+ gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
+ gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
+ gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
+
+ __raw_writel(gstatus4, S3C2410_GSTATUS4);
+
+ return s3c_pm_init();
+}
+
+arch_initcall(pm_simtec_init);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2004-2005 Simtec Electronics
+// Ben Dooks <ben@simtec.co.uk>
+//
+// http://www.simtec.co.uk/products/EB2410ITX/
+//
+// Simtec BAST and Thorcom VR1000 USB port support functions
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/gpio.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
+#include <asm/irq.h>
+
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include <plat/devs.h>
+
+#include "bast.h"
+#include "simtec.h"
+
+/* control power and monitor over-current events on various Simtec
+ * designed boards.
+*/
+
+static unsigned int power_state[2];
+
+static void
+usb_simtec_powercontrol(int port, int to)
+{
+ pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
+
+ power_state[port] = to;
+
+ if (power_state[0] && power_state[1])
+ gpio_set_value(S3C2410_GPB(4), 0);
+ else
+ gpio_set_value(S3C2410_GPB(4), 1);
+}
+
+static irqreturn_t
+usb_simtec_ocirq(int irq, void *pw)
+{
+ struct s3c2410_hcd_info *info = pw;
+
+ if (gpio_get_value(S3C2410_GPG(10)) == 0) {
+ pr_debug("usb_simtec: over-current irq (oc detected)\n");
+ s3c2410_usb_report_oc(info, 3);
+ } else {
+ pr_debug("usb_simtec: over-current irq (oc cleared)\n");
+ s3c2410_usb_report_oc(info, 0);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
+{
+ int ret;
+
+ if (on) {
+ ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "USB Over-current", info);
+ if (ret != 0) {
+ printk(KERN_ERR "failed to request usb oc irq\n");
+ }
+ } else {
+ free_irq(BAST_IRQ_USBOC, info);
+ }
+}
+
+static struct s3c2410_hcd_info usb_simtec_info __initdata = {
+ .port[0] = {
+ .flags = S3C_HCDFLG_USED
+ },
+ .port[1] = {
+ .flags = S3C_HCDFLG_USED
+ },
+
+ .power_control = usb_simtec_powercontrol,
+ .enable_oc = usb_simtec_enableoc,
+};
+
+
+int __init usb_simtec_init(void)
+{
+ int ret;
+
+ printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
+
+ ret = gpio_request(S3C2410_GPB(4), "USB power control");
+ if (ret < 0) {
+ pr_err("%s: failed to get GPB4\n", __func__);
+ return ret;
+ }
+
+ ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
+ if (ret < 0) {
+ pr_err("%s: failed to get GPG10\n", __func__);
+ gpio_free(S3C2410_GPB(4));
+ return ret;
+ }
+
+ /* turn power on */
+ gpio_direction_output(S3C2410_GPB(4), 1);
+ gpio_direction_input(S3C2410_GPG(10));
+
+ s3c_ohci_set_platdata(&usb_simtec_info);
+ return 0;
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec common functions
+ */
+
+struct s3c24xx_audio_simtec_pdata;
+
+extern void nor_simtec_init(void);
+
+extern int usb_simtec_init(void);
+
+extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
+ struct s3c24xx_audio_simtec_pdata *pdata);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Power Manager (Suspend-To-RAM) support
+ *
+ * Based on PXA/SA1100 sleep code by:
+ * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ * Cliff Brake, (c) 2001
+ */
+
+#include <linux/linkage.h>
+#include <linux/serial_s3c.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+
+#include "regs-mem-s3c24xx.h"
+
+ /* s3c2410_cpu_suspend
+ *
+ * put the cpu into sleep mode
+ */
+
+ENTRY(s3c2410_cpu_suspend)
+ @@ prepare cpu to sleep
+
+ ldr r4, =S3C2410_REFRESH
+ ldr r5, =S3C24XX_MISCCR
+ ldr r6, =S3C2410_CLKCON
+ ldr r7, [r4] @ get REFRESH (and ensure in TLB)
+ ldr r8, [r5] @ get MISCCR (and ensure in TLB)
+ ldr r9, [r6] @ get CLKCON (and ensure in TLB)
+
+ orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
+ orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
+ orr r9, r9, #S3C2410_CLKCON_POWER @ power down command
+
+ teq pc, #0 @ first as a trial-run to load cache
+ bl s3c2410_do_sleep
+ teq r0, r0 @ now do it for real
+ b s3c2410_do_sleep @
+
+ @@ align next bit of code to cache line
+ .align 5
+s3c2410_do_sleep:
+ streq r7, [r4] @ SDRAM sleep command
+ streq r8, [r5] @ SDRAM power-down config
+ streq r9, [r6] @ CPU sleep
+1: beq 1b
+ ret lr
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 Power Manager low-level sleep support
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#include <mach/regs-irq.h>
+
+ .text
+
+ .global s3c2412_sleep_enter
+
+s3c2412_sleep_enter:
+ mov r0, #0 /* argument for coprocessors */
+ ldr r1, =S3C2410_INTPND
+ ldr r2, =S3C2410_SRCPND
+ ldr r3, =S3C2410_EINTPEND
+
+ teq r0, r0
+ bl s3c2412_sleep_enter1
+ teq pc, r0
+ bl s3c2412_sleep_enter1
+
+ .align 5
+
+ /* this is called twice, first with the Z flag to ensure that the
+ * instructions have been loaded into the cache, and the second
+ * time to try and suspend the system.
+ */
+s3c2412_sleep_enter1:
+ mcr p15, 0, r0, c7, c10, 4
+ mcrne p15, 0, r0, c7, c0, 4
+
+ /* if we return from here, it is because an interrupt was
+ * active when we tried to shutdown. Try and ack the IRQ and
+ * retry, as simply returning causes the system to lock.
+ */
+
+ ldrne r9, [r1]
+ strne r9, [r1]
+ ldrne r9, [r2]
+ strne r9, [r2]
+ ldrne r9, [r3]
+ strne r9, [r3]
+ bne s3c2412_sleep_enter1
+
+ ret lr
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Power Manager (Suspend-To-RAM) support
+ *
+ * Based on PXA/SA1100 sleep code by:
+ * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ * Cliff Brake, (c) 2001
+ */
+
+#include <linux/linkage.h>
+#include <linux/serial_s3c.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+
+/*
+ * S3C24XX_DEBUG_RESUME is dangerous if your bootloader does not
+ * reset the UART configuration, only enable if you really need this!
+ */
+//#define S3C24XX_DEBUG_RESUME
+
+ .text
+
+ /* sleep magic, to allow the bootloader to check for an valid
+ * image to resume to. Must be the first word before the
+ * s3c_cpu_resume entry.
+ */
+
+ .word 0x2bedf00d
+
+ /* s3c_cpu_resume
+ *
+ * resume code entry for bootloader to call
+ */
+
+ENTRY(s3c_cpu_resume)
+ mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+ msr cpsr_c, r0
+
+ @@ load UART to allow us to print the two characters for
+ @@ resume debug
+
+ mov r2, #S3C24XX_PA_UART & 0xff000000
+ orr r2, r2, #S3C24XX_PA_UART & 0xff000
+
+#if 0
+ /* SMDK2440 LED set */
+ mov r14, #S3C24XX_PA_GPIO
+ ldr r12, [ r14, #0x54 ]
+ bic r12, r12, #3<<4
+ orr r12, r12, #1<<7
+ str r12, [ r14, #0x54 ]
+#endif
+
+#ifdef S3C24XX_DEBUG_RESUME
+ mov r3, #'L'
+ strb r3, [ r2, #S3C2410_UTXH ]
+1001:
+ ldrb r14, [ r3, #S3C2410_UTRSTAT ]
+ tst r14, #S3C2410_UTRSTAT_TXE
+ beq 1001b
+#endif /* S3C24XX_DEBUG_RESUME */
+
+ b cpu_resume
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/* linux/arch/arm/plat-s3c64xx/sleep.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU sleep code
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#undef S3C64XX_VA_GPIO
+#define S3C64XX_VA_GPIO (0x0)
+
+#include <mach/regs-gpio.h>
+
+#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
+
+ .text
+
+ /* Sleep magic, the word before the resume entry point so that the
+ * bootloader can check for a resumeable image. */
+
+ .word 0x2bedf00d
+
+ /* s3c_cpu_reusme
+ *
+ * This is the entry point, stored by whatever method the bootloader
+ * requires to get the kernel runnign again. This code expects to be
+ * entered with no caches live and the MMU disabled. It will then
+ * restore the MMU and other basic CP registers saved and restart
+ * the kernel C code to finish the resume code.
+ */
+
+ENTRY(s3c_cpu_resume)
+ msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+ ldr r2, =LL_UART /* for debug */
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+
+#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00)
+#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04)
+
+#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
+
+ /* Initialise the GPIO state if we are debugging via the SMDK LEDs,
+ * as the uboot version supplied resets these to inputs during the
+ * resume checks.
+ */
+
+ ldr r3, =S3C64XX_PA_GPIO
+ ldr r0, [ r3, #S3C64XX_GPNCON ]
+ bic r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
+ S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
+ orr r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
+ S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
+ str r0, [ r3, #S3C64XX_GPNCON ]
+
+ ldr r0, [ r3, #S3C64XX_GPNDAT ]
+ bic r0, r0, #0xf << 12 @ GPN12..15
+ orr r0, r0, #1 << 15 @ GPN15
+ str r0, [ r3, #S3C64XX_GPNDAT ]
+#endif
+ b cpu_resume
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
+ */
+
+#ifndef __PLAT_S3C_SPI_CORE_S3C24XX_H
+#define __PLAT_S3C_SPI_CORE_S3C24XX_H
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c24xx_spi_setname(char *name)
+{
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+ s3c64xx_device_spi0.name = name;
+#endif
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+ s3c64xx_device_spi1.name = name;
+#endif
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+ s3c64xx_device_spi2.name = name;
+#endif
+}
+
+#endif /* __PLAT_S3C_SPI_CORE_S3C24XX_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * VR1000 - CPLD control constants
+ * Machine VR1000 - IRQ Number definitions
+ * Machine VR1000 - Memory map definitions
+ */
+
+#ifndef __MACH_S3C24XX_VR1000_H
+#define __MACH_S3C24XX_VR1000_H __FILE__
+
+#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */
+
+/* irq numbers to onboard peripherals */
+
+#define VR1000_IRQ_USBOC IRQ_EINT19
+#define VR1000_IRQ_IDE0 IRQ_EINT16
+#define VR1000_IRQ_IDE1 IRQ_EINT17
+#define VR1000_IRQ_SERIAL IRQ_EINT12
+#define VR1000_IRQ_DM9000A IRQ_EINT10
+#define VR1000_IRQ_DM9000N IRQ_EINT9
+#define VR1000_IRQ_SMALERT IRQ_EINT8
+
+/* map */
+
+#define VR1000_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */
+#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
+
+#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */
+#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
+
+#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */
+#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
+
+#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */
+#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000)
+
+#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000)
+
+#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000 8bit, slow
+ * 0x04000000 to 0x08000000 16bit, slow
+ * 0x08000000 to 0x0C000000 16bit, net
+ * 0x0C000000 to 0x10000000 16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x02000000 to 0x02100000 1MB IDE primary channel
+ * 0x02100000 to 0x02200000 1MB IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
+ * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers
+ * 0x02600000 to 0x02700000 1MB
+ *
+ * the phyiscal layout of the zones are:
+ * nGCS2 - 8bit, slow
+ * nGCS3 - 16bit, slow
+ * nGCS4 - 16bit, net
+ * nGCS5 - 16bit, fast
+ */
+
+#define VR1000_VA_MULTISPACE (0xE0000000)
+
+#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000)
+#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000)
+#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000)
+#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000)
+#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000)
+#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000)
+#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000)
+#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000)
+#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000)
+
+/* physical offset addresses for the peripherals */
+
+#define VR1000_PA_IDEPRI (0x02000000)
+#define VR1000_PA_IDEPRIAUX (0x02800000)
+#define VR1000_PA_IDESEC (0x03000000)
+#define VR1000_PA_IDESECAUX (0x03800000)
+#define VR1000_PA_DM9000 (0x05000000)
+
+#define VR1000_PA_SERIAL (0x11800000)
+#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000))
+
+/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
+#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000)
+
+/* some configurations for the peripherals */
+
+#define VR1000_DM9000_CS VR1000_VAM_CS4
+
+#endif /* __MACH_S3C24XX_VR1000_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+//
+// Support for wakeup mask interrupts on newer SoCs
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <plat/wakeup-mask.h>
+#include <plat/pm.h>
+
+void samsung_sync_wakemask(void __iomem *reg,
+ const struct samsung_wakeup_mask *mask, int nr_mask)
+{
+ struct irq_data *data;
+ u32 val;
+
+ val = __raw_readl(reg);
+
+ for (; nr_mask > 0; nr_mask--, mask++) {
+ if (mask->irq == NO_WAKEUP_IRQ) {
+ val |= mask->bit;
+ continue;
+ }
+
+ data = irq_get_irq_data(mask->irq);
+
+ /* bit of a liberty to read this directly from irq_data. */
+ if (irqd_is_wakeup_set(data))
+ val &= ~mask->bit;
+ else
+ val |= mask->bit;
+ }
+
+ printk(KERN_INFO "wakemask %08x => %08x\n", __raw_readl(reg), val);
+ __raw_writel(val, reg);
+}
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright (c) 2012 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Copyright 2007 Simtec Electronics
-
-if ARCH_S3C24XX
-
-config PLAT_S3C24XX
- def_bool y
- select GPIOLIB
- select NO_IOPORT_MAP
- select S3C_DEV_NAND
- select IRQ_DOMAIN
- select COMMON_CLK
- help
- Base platform code for any Samsung S3C24XX device
-
-
-
-menu "Samsung S3C24XX SoCs Support"
-
-comment "S3C24XX SoCs"
-
-config CPU_S3C2410
- bool "Samsung S3C2410"
- default y
- select CPU_ARM920T
- select S3C2410_COMMON_CLK
- select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
- select S3C2410_PM if PM
- help
- Support for S3C2410 and S3C2410A family from the S3C24XX line
- of Samsung Mobile CPUs.
-
-config CPU_S3C2412
- bool "Samsung S3C2412"
- select CPU_ARM926T
- select S3C2412_COMMON_CLK
- select S3C2412_PM if PM_SLEEP
- help
- Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
-
-config CPU_S3C2416
- bool "Samsung S3C2416/S3C2450"
- select CPU_ARM926T
- select S3C2416_PM if PM_SLEEP
- select S3C2443_COMMON_CLK
- help
- Support for the S3C2416 SoC from the S3C24XX line
-
-config CPU_S3C2440
- bool "Samsung S3C2440"
- select CPU_ARM920T
- select S3C2410_COMMON_CLK
- select S3C2410_PM if PM_SLEEP
- help
- Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
- bool "Samsung S3C2442"
- select CPU_ARM920T
- select S3C2410_COMMON_CLK
- select S3C2410_PM if PM_SLEEP
- help
- Support for S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C244X
- def_bool y
- depends on CPU_S3C2440 || CPU_S3C2442
-
-config CPU_S3C2443
- bool "Samsung S3C2443"
- select CPU_ARM920T
- select S3C2443_COMMON_CLK
- help
- Support for the S3C2443 SoC from the S3C24XX line
-
-# common code
-
-config S3C24XX_SMDK
- bool
- help
- Common machine code for SMDK2410 and SMDK2440
-
-config S3C24XX_SIMTEC_AUDIO
- bool
- depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
- default y
- help
- Add audio devices for common Simtec S3C24XX boards
-
-config S3C24XX_SIMTEC_PM
- bool
- help
- Common power management code for systems that are
- compatible with the Simtec style of power management
-
-config S3C24XX_SIMTEC_USB
- bool
- help
- USB management code for common Simtec S3C24XX boards
-
-config S3C24XX_SETUP_TS
- bool
- help
- Compile in platform device definition for Samsung TouchScreen.
-
-config S3C2410_PM
- bool
- help
- Power Management code common to S3C2410 and better
-
-config S3C24XX_PLL
- bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
- depends on ARM_S3C24XX_CPUFREQ
- help
- Compile in support for changing the PLL frequency from the
- S3C24XX series CPUfreq driver. The PLL takes time to settle
- after a frequency change, so by default it is not enabled.
-
- This also means that the PLL tables for the selected CPU(s) will
- be built which may increase the size of the kernel image.
-
-# cpu frequency items common between s3c2410 and s3c2440/s3c2442
-
-config S3C2410_IOTIMING
- bool
- depends on ARM_S3C24XX_CPUFREQ
- help
- Internal node to select io timing code that is common to the s3c2410
- and s3c2440/s3c2442 cpu frequency support.
-
-# cpu frequency support common to s3c2412, s3c2413 and s3c2442
-
-config S3C2412_IOTIMING
- bool
- depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443)
- help
- Intel node to select io timing code that is common to the s3c2412
- and the s3c2443.
-
-# cpu-specific sections
-
-if CPU_S3C2410
-
-config S3C2410_PLL
- bool
- depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL
- default y
- help
- Select the PLL table for the S3C2410
-
-config S3C24XX_SIMTEC_NOR
- bool
- help
- Internal node to specify machine has simtec NOR mapping
-
-config MACH_BAST_IDE
- bool
- select HAVE_PATA_PLATFORM
- help
- Internal node for machines with an BAST style IDE
- interface
-
-comment "S3C2410 Boards"
-
-#
-# The "S3C2410 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_AML_M5900
- bool "AML M5900 Series"
- select S3C24XX_SIMTEC_PM if PM
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the American Microsystems M5900 Series
- <http://www.amltd.com>
-
-config ARCH_BAST
- bool "Simtec Electronics BAST (EB2410ITX)"
- select ISA
- select MACH_BAST_IDE
- select S3C2410_COMMON_DCLK
- select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
- select S3C24XX_SIMTEC_NOR
- select S3C24XX_SIMTEC_PM if PM
- select S3C24XX_SIMTEC_USB
- select S3C_DEV_HWMON
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Simtec Electronics EB2410ITX
- development board (also known as BAST)
-
-config BAST_PC104_IRQ
- bool "BAST PC104 IRQ support"
- depends on ARCH_BAST
- default y
- help
- Say Y here to enable the PC104 IRQ routing on the
- Simtec BAST (EB2410ITX)
-
-config ARCH_H1940
- bool "IPAQ H1940"
- select PM_H1940 if PM
- select S3C24XX_SETUP_TS
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the HP IPAQ H1940
-
-config H1940BT
- tristate "Control the state of H1940 bluetooth chip"
- depends on ARCH_H1940
- depends on RFKILL
- help
- This is a simple driver that is able to control
- the state of built in bluetooth chip on h1940.
-
-config MACH_N30
- bool "Acer N30 family"
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here if you want suppt for the Acer N30, Acer N35,
- Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
-
-config MACH_OTOM
- bool "NexVision OTOM Board"
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_QT2410
- bool "QT2410"
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Armzone QT2410
-
-config ARCH_SMDK2410
- bool "SMDK2410/A9M2410"
- select S3C24XX_SMDK
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the SMDK2410 or the derived module A9M2410
- <http://www.fsforth.de>
-
-config MACH_TCT_HAMMER
- bool "TCT Hammer Board"
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the TinCanTools Hammer Board
- <https://www.tincantools.com>
-
-config MACH_VR1000
- bool "Thorcom VR1000"
- select MACH_BAST_IDE
- select S3C2410_COMMON_DCLK
- select S3C24XX_SIMTEC_NOR
- select S3C24XX_SIMTEC_PM if PM
- select S3C24XX_SIMTEC_USB
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Thorcom VR1000 board.
-
-endif # CPU_S3C2410
-
-config S3C2412_PM_SLEEP
- bool
- help
- Internal config node to apply sleep for S3C2412 power management.
- Can be selected by another SoCs such as S3C2416 with similar
- sleep procedure.
-
-if CPU_S3C2412
-
-config CPU_S3C2412_ONLY
- bool
- depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \
- !CPU_S3C2442 && !CPU_S3C2443
- default y
-
-config S3C2412_PM
- bool
- select S3C2412_PM_SLEEP
- select SAMSUNG_WAKEMASK
- help
- Internal config node to apply S3C2412 power management
-
-comment "S3C2412 Boards"
-
-#
-# The "S3C2412 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_JIVE
- bool "Logitech Jive"
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Logitech Jive.
-
-config MACH_JIVE_SHOW_BOOTLOADER
- bool "Allow access to bootloader partitions in MTD"
- depends on MACH_JIVE
-
-config MACH_S3C2413
- bool
- help
- Internal node for S3C2413 version of SMDK2413, so that
- machine_is_s3c2413() will work when MACH_SMDK2413 is
- selected
-
-config MACH_SMDK2412
- bool "SMDK2412"
- select MACH_SMDK2413
- help
- Say Y here if you are using an SMDK2412
-
- Note, this shares support with SMDK2413, so will automatically
- select MACH_SMDK2413.
-
-config MACH_SMDK2413
- bool "SMDK2413"
- select MACH_S3C2413
- select S3C24XX_SMDK
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using an SMDK2413
-
-config MACH_VSTMS
- bool "VMSTMS"
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using an VSTMS board
-
-endif # CPU_S3C2412
-
-if CPU_S3C2416
-
-config S3C2416_PM
- bool
- select S3C2412_PM_SLEEP
- select SAMSUNG_WAKEMASK
- help
- Internal config node to apply S3C2416 power management
-
-config S3C2416_SETUP_SDHCI
- bool
- select S3C2416_SETUP_SDHCI_GPIO
- help
- Internal helper functions for S3C2416 based SDHCI systems
-
-config S3C2416_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for SDHCI gpio.
-
-comment "S3C2416 Boards"
-
-config MACH_SMDK2416
- bool "SMDK2416"
- select S3C2416_SETUP_SDHCI
- select S3C24XX_SMDK
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using an SMDK2416
-
-config MACH_S3C2416_DT
- bool "Samsung S3C2416 machine using devicetree"
- select TIMER_OF
- select USE_OF
- select PINCTRL
- select PINCTRL_S3C24XX
- help
- Machine support for Samsung S3C2416 machines with device tree enabled.
- Select this if a fdt blob is available for the S3C2416 SoC based board.
- Note: This is under development and not all peripherals can be supported
- with this machine file.
-
-endif # CPU_S3C2416
-
-if CPU_S3C2440 || CPU_S3C2442
-
-config S3C2440_XTAL_12000000
- bool
- help
- Indicate that the build needs to support 12MHz system
- crystal.
-
-config S3C2440_XTAL_16934400
- bool
- help
- Indicate that the build needs to support 16.9344MHz system
- crystal.
-
-config S3C2440_PLL_12000000
- bool
- depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000
- default y if S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
- bool
- depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400
- default y if S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-endif
-
-if CPU_S3C2440
-
-comment "S3C2440 Boards"
-
-#
-# The "S3C2440 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_ANUBIS
- bool "Simtec Electronics ANUBIS"
- select HAVE_PATA_PLATFORM
- select S3C2410_COMMON_DCLK
- select S3C2440_XTAL_12000000
- select S3C24XX_SIMTEC_PM if PM
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Simtec Electronics ANUBIS
- development system
-
-config MACH_AT2440EVB
- bool "Avantech AT2440EVB development board"
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the AT2440EVB development board
-
-config MACH_MINI2440
- bool "MINI2440 development board"
- select LEDS_CLASS
- select LEDS_TRIGGERS
- select LEDS_TRIGGER_BACKLIGHT
- select NEW_LEDS
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
- available via various sources. It can come with a 3.5" or 7" touch LCD.
-
-config MACH_NEXCODER_2440
- bool "NexVision NEXCODER 2440 Light Board"
- select S3C2440_XTAL_12000000
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config MACH_OSIRIS
- bool "Simtec IM2440D20 (OSIRIS) module"
- select S3C2410_COMMON_DCLK
- select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
- select S3C2440_XTAL_12000000
- select S3C24XX_SIMTEC_PM if PM
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Simtec IM2440D20 module, also
- known as the Osiris.
-
-config MACH_OSIRIS_DVS
- tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
- depends on MACH_OSIRIS
- depends on TPS65010
- help
- Say Y/M here if you want to have dynamic voltage scaling support
- on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
-
- The DVS driver alters the voltage supplied to the ARM core
- depending on the frequency it is running at. The driver itself
- does not do any of the frequency alteration, which is left up
- to the cpufreq driver.
-
-config MACH_RX3715
- bool "HP iPAQ rx3715"
- select PM_H1940 if PM
- select S3C2440_XTAL_16934400
- select S3C_DEV_NAND
- help
- Say Y here if you are using the HP iPAQ rx3715.
-
-config ARCH_S3C2440
- bool "SMDK2440"
- select S3C2440_XTAL_16934400
- select S3C24XX_SMDK
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the SMDK2440.
-
-config SMDK2440_CPU2440
- bool "SMDK2440 with S3C2440 CPU module"
- default y if ARCH_S3C2440
- select S3C2440_XTAL_16934400
-
-endif # CPU_S3C2440
-
-if CPU_S3C2442
-
-comment "S3C2442 Boards"
-
-#
-# The "S3C2442 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_NEO1973_GTA02
- bool "Openmoko GTA02 / Freerunner phone"
- select I2C
- select MFD_PCF50633
- select PCF50633_GPIO
- select POWER_SUPPLY
- select S3C24XX_PWM
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-config MACH_RX1950
- bool "HP iPAQ rx1950"
- select I2C
- select PM_H1940 if PM
- select S3C2410_COMMON_DCLK
- select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
- select S3C2440_XTAL_16934400
- select S3C24XX_PWM
- select S3C_DEV_NAND
- help
- Say Y here if you're using HP iPAQ rx1950
-
-endif # CPU_S3C2442
-
-if CPU_S3C2443 || CPU_S3C2416
-
-config S3C2443_SETUP_SPI
- bool
- help
- Common setup code for SPI GPIO configurations
-
-endif # CPU_S3C2443 || CPU_S3C2416
-
-if CPU_S3C2443
-
-comment "S3C2443 Boards"
-
-config MACH_SMDK2443
- bool "SMDK2443"
- select S3C24XX_SMDK
- select S3C_DEV_HSMMC1
- help
- Say Y here if you are using an SMDK2443
-
-endif # CPU_S3C2443
-
-config PM_H1940
- bool
- help
- Internal node for H1940 and related PM
-
-endmenu # Samsung S3C24XX SoCs Support
-
-endif # ARCH_S3C24XX
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright (c) 2012 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Copyright 2007 Simtec Electronics
-
-# core
-
-obj-y += common.o
-obj-y += irq-s3c24xx.o
-obj-$(CONFIG_SPI_S3C24XX_FIQ) += irq-s3c24xx-fiq.o
-obj-$(CONFIG_SPI_S3C24XX_FIQ) += irq-s3c24xx-fiq-exports.o
-
-obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
-obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
-obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
-
-obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
-obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
-obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
-
-obj-$(CONFIG_CPU_S3C2416) += s3c2416.o
-obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
-
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o
-obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
-obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
-
-obj-$(CONFIG_CPU_S3C2443) += s3c2443.o
-
-# PM
-
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM_SLEEP) += irq-pm.o sleep.o
-
-# common code
-
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += cpufreq-utils.o
-
-obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o
-obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o
-
-#
-# machine support
-# following is ordered alphabetically by option text.
-#
-
-obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
-obj-$(CONFIG_ARCH_BAST) += mach-bast.o
-obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
-obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
-obj-$(CONFIG_H1940BT) += h1940-bluetooth.o
-obj-$(CONFIG_PM_H1940) += pm-h1940.o
-obj-$(CONFIG_MACH_N30) += mach-n30.o
-obj-$(CONFIG_MACH_OTOM) += mach-otom.o
-obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
-obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
-obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o
-obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o
-
-obj-$(CONFIG_MACH_JIVE) += mach-jive.o
-obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
-obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
-
-obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
-obj-$(CONFIG_MACH_S3C2416_DT) += mach-s3c2416-dt.o
-
-obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
-obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
-obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
-obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
-obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
-obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
-
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
-
-obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o
-
-# common bits of machine support
-
-obj-$(CONFIG_S3C24XX_SMDK) += common-smdk.o
-obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o
-obj-$(CONFIG_S3C24XX_SIMTEC_NOR) += simtec-nor.o
-obj-$(CONFIG_S3C24XX_SIMTEC_PM) += simtec-pm.o
-obj-$(CONFIG_S3C24XX_SIMTEC_USB) += simtec-usb.o
-
-# machine additions
-
-obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
-obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
-
-# device setup
-
-obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_S3C2443_SETUP_SPI) += setup-spi.o
-obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o
-obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts.o
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-
-ifeq ($(CONFIG_PM_H1940),y)
- zreladdr-y += 0x30108000
- params_phys-y := 0x30100100
-else
- zreladdr-y += 0x30008000
- params_phys-y := 0x30000100
-endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - CPLD control constants
- * ANUBIS - IRQ Number definitions
- * ANUBIS - Memory map definitions
- */
-
-#ifndef __MACH_S3C24XX_ANUBIS_H
-#define __MACH_S3C24XX_ANUBIS_H __FILE__
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define ANUBIS_CTRL1_NANDSEL (0x3)
-
-/* IDREG - revision */
-
-#define ANUBIS_IDREG_REVMASK (0x7)
-
-/* irq */
-
-#define ANUBIS_IRQ_IDE0 IRQ_EINT2
-#define ANUBIS_IRQ_IDE1 IRQ_EINT3
-#define ANUBIS_IRQ_ASIX IRQ_EINT1
-
-/* map */
-
-/* start peripherals off after the S3C2410 */
-
-#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000))
-
-#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000)
-#define ANUBIS_PA_CTRL1 ANUBIS_PA_CPLD
-
-#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000)
-#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3 << 23))
-
-#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000)
-#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000)
-#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000)
-#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000)
-
-#endif /* __MACH_S3C24XX_ANUBIS_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2007 Simtec Electronics
-// http://www.simtec.co.uk/products/EB2410ITX/
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include "bast.h"
-
-/* IDE ports */
-
-static struct pata_platform_info bast_ide_platdata = {
- .ioport_shift = 5,
-};
-
-static struct resource bast_ide0_resource[] = {
- [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
- [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
- [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE0),
-};
-
-static struct platform_device bast_device_ide0 = {
- .name = "pata_platform",
- .id = 0,
- .num_resources = ARRAY_SIZE(bast_ide0_resource),
- .resource = bast_ide0_resource,
- .dev = {
- .platform_data = &bast_ide_platdata,
- .coherent_dma_mask = ~0,
- }
-
-};
-
-static struct resource bast_ide1_resource[] = {
- [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
- [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
- [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE1),
-};
-
-static struct platform_device bast_device_ide1 = {
- .name = "pata_platform",
- .id = 1,
- .num_resources = ARRAY_SIZE(bast_ide1_resource),
- .resource = bast_ide1_resource,
- .dev = {
- .platform_data = &bast_ide_platdata,
- .coherent_dma_mask = ~0,
- }
-};
-
-static struct platform_device *bast_ide_devices[] __initdata = {
- &bast_device_ide0,
- &bast_device_ide1,
-};
-
-static __init int bast_ide_init(void)
-{
- if (machine_is_bast() || machine_is_vr1000())
- return platform_add_devices(bast_ide_devices,
- ARRAY_SIZE(bast_ide_devices));
-
- return 0;
-}
-
-fs_initcall(bast_ide_init);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2003-2005 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.simtec.co.uk/products/EB2410ITX/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/irqs.h>
-
-#include "bast.h"
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-/* handle PC104 ISA interrupts from the system CPLD */
-
-/* table of ISA irq nos to the relevant mask... zero means
- * the irq is not implemented
-*/
-static const unsigned char bast_pc104_irqmasks[] = {
- 0, /* 0 */
- 0, /* 1 */
- 0, /* 2 */
- 1, /* 3 */
- 0, /* 4 */
- 2, /* 5 */
- 0, /* 6 */
- 4, /* 7 */
- 0, /* 8 */
- 0, /* 9 */
- 8, /* 10 */
- 0, /* 11 */
- 0, /* 12 */
- 0, /* 13 */
- 0, /* 14 */
- 0, /* 15 */
-};
-
-static const unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 };
-
-static void
-bast_pc104_mask(struct irq_data *data)
-{
- unsigned long temp;
-
- temp = __raw_readb(BAST_VA_PC104_IRQMASK);
- temp &= ~bast_pc104_irqmasks[data->irq];
- __raw_writeb(temp, BAST_VA_PC104_IRQMASK);
-}
-
-static void
-bast_pc104_maskack(struct irq_data *data)
-{
- struct irq_desc *desc = irq_to_desc(BAST_IRQ_ISA);
-
- bast_pc104_mask(data);
- desc->irq_data.chip->irq_ack(&desc->irq_data);
-}
-
-static void
-bast_pc104_unmask(struct irq_data *data)
-{
- unsigned long temp;
-
- temp = __raw_readb(BAST_VA_PC104_IRQMASK);
- temp |= bast_pc104_irqmasks[data->irq];
- __raw_writeb(temp, BAST_VA_PC104_IRQMASK);
-}
-
-static struct irq_chip bast_pc104_chip = {
- .irq_mask = bast_pc104_mask,
- .irq_unmask = bast_pc104_unmask,
- .irq_ack = bast_pc104_maskack
-};
-
-static void bast_irq_pc104_demux(struct irq_desc *desc)
-{
- unsigned int stat;
- unsigned int irqno;
- int i;
-
- stat = __raw_readb(BAST_VA_PC104_IRQREQ) & 0xf;
-
- if (unlikely(stat == 0)) {
- /* ack if we get an irq with nothing (ie, startup) */
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- } else {
- /* handle the IRQ */
-
- for (i = 0; stat != 0; i++, stat >>= 1) {
- if (stat & 1) {
- irqno = bast_pc104_irqs[i];
- generic_handle_irq(irqno);
- }
- }
- }
-}
-
-static __init int bast_irq_init(void)
-{
- unsigned int i;
-
- if (machine_is_bast()) {
- printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n");
-
- /* zap all the IRQs */
-
- __raw_writeb(0x0, BAST_VA_PC104_IRQMASK);
-
- irq_set_chained_handler(BAST_IRQ_ISA, bast_irq_pc104_demux);
-
- /* register our IRQs */
-
- for (i = 0; i < 4; i++) {
- unsigned int irqno = bast_pc104_irqs[i];
-
- irq_set_chip_and_handler(irqno, &bast_pc104_chip,
- handle_level_irq);
- irq_clear_status_flags(irqno, IRQ_NOREQUEST);
- }
- }
-
- return 0;
-}
-
-arch_initcall(bast_irq_init);
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * BAST - CPLD control constants
- * BAST - IRQ Number definitions
- * BAST - Memory map definitions
- */
-
-#ifndef __MACH_S3C24XX_BAST_H
-#define __MACH_S3C24XX_BAST_H __FILE__
-
-/* CTRL1 - Audio LR routing */
-
-#define BAST_CPLD_CTRL1_LRCOFF (0x00)
-#define BAST_CPLD_CTRL1_LRCADC (0x01)
-#define BAST_CPLD_CTRL1_LRCDAC (0x02)
-#define BAST_CPLD_CTRL1_LRCARM (0x03)
-#define BAST_CPLD_CTRL1_LRMASK (0x03)
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define BAST_CPLD_CTRL2_WNAND (0x04)
-#define BAST_CPLD_CTLR2_IDERST (0x08)
-
-/* CTRL3 - rom write control, CPLD identity */
-
-#define BAST_CPLD_CTRL3_IDMASK (0x0e)
-#define BAST_CPLD_CTRL3_ROMWEN (0x01)
-
-/* CTRL4 - 8bit LCD interface control/status */
-
-#define BAST_CPLD_CTRL4_LLAT (0x01)
-#define BAST_CPLD_CTRL4_LCDRW (0x02)
-#define BAST_CPLD_CTRL4_LCDCMD (0x04)
-#define BAST_CPLD_CTRL4_LCDE2 (0x01)
-
-/* CTRL5 - DMA routing */
-
-#define BAST_CPLD_DMA0_PRIIDE (0)
-#define BAST_CPLD_DMA0_SECIDE (1)
-#define BAST_CPLD_DMA0_ISA15 (2)
-#define BAST_CPLD_DMA0_ISA36 (3)
-
-#define BAST_CPLD_DMA1_PRIIDE (0 << 2)
-#define BAST_CPLD_DMA1_SECIDE (1 << 2)
-#define BAST_CPLD_DMA1_ISA15 (2 << 2)
-#define BAST_CPLD_DMA1_ISA36 (3 << 2)
-
-/* irq numbers to onboard peripherals */
-
-#define BAST_IRQ_USBOC IRQ_EINT18
-#define BAST_IRQ_IDE0 IRQ_EINT16
-#define BAST_IRQ_IDE1 IRQ_EINT17
-#define BAST_IRQ_PCSERIAL1 IRQ_EINT15
-#define BAST_IRQ_PCSERIAL2 IRQ_EINT14
-#define BAST_IRQ_PCPARALLEL IRQ_EINT13
-#define BAST_IRQ_ASIX IRQ_EINT11
-#define BAST_IRQ_DM9000 IRQ_EINT10
-#define BAST_IRQ_ISA IRQ_EINT9
-#define BAST_IRQ_SMALERT IRQ_EINT8
-
-/* map */
-
-/*
- * ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000)
-#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
-
-#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000)
-#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
-
-#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000)
-#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
-
-#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000)
-#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000)
-#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000)
-
-#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000)
-#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000)
-
-#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000)
-#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
-
-#define BAST_PA_LCD_RCMD1 (0x8800000)
-#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000)
-
-#define BAST_PA_LCD_WCMD1 (0x8000000)
-#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000)
-
-#define BAST_PA_LCD_RDATA1 (0x9800000)
-#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000)
-
-#define BAST_PA_LCD_WDATA1 (0x9000000)
-#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000)
-
-#define BAST_PA_LCD_RCMD2 (0xA800000)
-#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000)
-
-#define BAST_PA_LCD_WCMD2 (0xA000000)
-#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000)
-
-#define BAST_PA_LCD_RDATA2 (0xB800000)
-#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000)
-
-#define BAST_PA_LCD_WDATA2 (0xB000000)
-#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000)
-
-
-/*
- * 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000 8bit, slow
- * 0x04000000 to 0x08000000 16bit, slow
- * 0x08000000 to 0x0C000000 16bit, net
- * 0x0C000000 to 0x10000000 16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x00000000 to 0x01000000 16MB ISA IO space
- * 0x01000000 to 0x02000000 16MB ISA memory space
- * 0x02000000 to 0x02100000 1MB IDE primary channel
- * 0x02100000 to 0x02200000 1MB IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB IDE secondary channel
- * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
- * 0x02400000 to 0x02500000 1MB ASIX ethernet controller
- * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller
- * 0x02600000 to 0x02700000 1MB PC SuperIO controller
- *
- * the phyiscal layout of the zones are:
- * nGCS2 - 8bit, slow
- * nGCS3 - 16bit, slow
- * nGCS4 - 16bit, net
- * nGCS5 - 16bit, fast
- */
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000)
-#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000)
-#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000)
-#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000)
-#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000)
-#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000)
-#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000)
-#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000)
-#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000)
-
-#define BAST_VAM_CS2 (0x00000000)
-#define BAST_VAM_CS3 (0x04000000)
-#define BAST_VAM_CS4 (0x08000000)
-#define BAST_VAM_CS5 (0x0C000000)
-
-/* physical offset addresses for the peripherals */
-
-#define BAST_PA_ISAIO (0x00000000)
-#define BAST_PA_ASIXNET (0x01000000)
-#define BAST_PA_SUPERIO (0x01800000)
-#define BAST_PA_IDEPRI (0x02000000)
-#define BAST_PA_IDEPRIAUX (0x02800000)
-#define BAST_PA_IDESEC (0x03000000)
-#define BAST_PA_IDESECAUX (0x03800000)
-#define BAST_PA_ISAMEM (0x04000000)
-#define BAST_PA_DM9000 (0x05000000)
-
-/* some configurations for the peripherals */
-
-#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
-
-#define BAST_ASIXNET_CS BAST_VAM_CS5
-#define BAST_DM9000_CS BAST_VAM_CS4
-
-#define BAST_IDE_CS S3C2410_CS5
-
-#endif /* __MACH_S3C24XX_BAST_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Common code for SMDK2410 and SMDK2440 boards
-//
-// http://www.fluff.org/ben/smdk2440/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-
-#include "common-smdk.h"
-
-/* LED devices */
-
-static struct gpiod_lookup_table smdk_led4_gpio_table = {
- .dev_id = "s3c24xx_led.0",
- .table = {
- GPIO_LOOKUP("GPF", 4, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
- { },
- },
-};
-
-static struct gpiod_lookup_table smdk_led5_gpio_table = {
- .dev_id = "s3c24xx_led.1",
- .table = {
- GPIO_LOOKUP("GPF", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
- { },
- },
-};
-
-static struct gpiod_lookup_table smdk_led6_gpio_table = {
- .dev_id = "s3c24xx_led.2",
- .table = {
- GPIO_LOOKUP("GPF", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
- { },
- },
-};
-
-static struct gpiod_lookup_table smdk_led7_gpio_table = {
- .dev_id = "s3c24xx_led.3",
- .table = {
- GPIO_LOOKUP("GPF", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
- { },
- },
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led4 = {
- .name = "led4",
- .def_trigger = "timer",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led5 = {
- .name = "led5",
- .def_trigger = "nand-disk",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led6 = {
- .name = "led6",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led7 = {
- .name = "led7",
-};
-
-static struct platform_device smdk_led4 = {
- .name = "s3c24xx_led",
- .id = 0,
- .dev = {
- .platform_data = &smdk_pdata_led4,
- },
-};
-
-static struct platform_device smdk_led5 = {
- .name = "s3c24xx_led",
- .id = 1,
- .dev = {
- .platform_data = &smdk_pdata_led5,
- },
-};
-
-static struct platform_device smdk_led6 = {
- .name = "s3c24xx_led",
- .id = 2,
- .dev = {
- .platform_data = &smdk_pdata_led6,
- },
-};
-
-static struct platform_device smdk_led7 = {
- .name = "s3c24xx_led",
- .id = 3,
- .dev = {
- .platform_data = &smdk_pdata_led7,
- },
-};
-
-/* NAND parititon from 2.4.18-swl5 */
-
-static struct mtd_partition smdk_default_nand_part[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_16K,
- .offset = 0,
- },
- [1] = {
- .name = "S3C2410 flash partition 1",
- .offset = 0,
- .size = SZ_2M,
- },
- [2] = {
- .name = "S3C2410 flash partition 2",
- .offset = SZ_4M,
- .size = SZ_4M,
- },
- [3] = {
- .name = "S3C2410 flash partition 3",
- .offset = SZ_8M,
- .size = SZ_2M,
- },
- [4] = {
- .name = "S3C2410 flash partition 4",
- .offset = SZ_1M * 10,
- .size = SZ_4M,
- },
- [5] = {
- .name = "S3C2410 flash partition 5",
- .offset = SZ_1M * 14,
- .size = SZ_1M * 10,
- },
- [6] = {
- .name = "S3C2410 flash partition 6",
- .offset = SZ_1M * 24,
- .size = SZ_1M * 24,
- },
- [7] = {
- .name = "S3C2410 flash partition 7",
- .offset = SZ_1M * 48,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct s3c2410_nand_set smdk_nand_sets[] = {
- [0] = {
- .name = "NAND",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(smdk_default_nand_part),
- .partitions = smdk_default_nand_part,
- },
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
-*/
-
-static struct s3c2410_platform_nand smdk_nand_info = {
- .tacls = 20,
- .twrph0 = 60,
- .twrph1 = 20,
- .nr_sets = ARRAY_SIZE(smdk_nand_sets),
- .sets = smdk_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-/* devices we initialise */
-
-static struct platform_device __initdata *smdk_devs[] = {
- &s3c_device_nand,
- &smdk_led4,
- &smdk_led5,
- &smdk_led6,
- &smdk_led7,
-};
-
-void __init smdk_machine_init(void)
-{
- if (machine_is_smdk2443())
- smdk_nand_info.twrph0 = 50;
-
- s3c_nand_set_platdata(&smdk_nand_info);
-
- /* Disable pull-up on the LED lines */
- s3c_gpio_setpull(S3C2410_GPF(4), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPF(5), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPF(6), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPF(7), S3C_GPIO_PULL_NONE);
-
- /* Add lookups for the lines */
- gpiod_add_lookup_table(&smdk_led4_gpio_table);
- gpiod_add_lookup_table(&smdk_led5_gpio_table);
- gpiod_add_lookup_table(&smdk_led6_gpio_table);
- gpiod_add_lookup_table(&smdk_led7_gpio_table);
-
- platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
-
- s3c_pm_init();
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- */
-
-extern void smdk_machine_init(void);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2004-2005 Simtec Electronics
-// http://www.simtec.co.uk/products/SWLINUX/
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Common code for S3C24XX machines
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <clocksource/samsung_pwm.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/platform_data/clk-s3c2410.h>
-#include <linux/platform_data/dma-s3c24xx.h>
-#include <linux/dmaengine.h>
-#include <linux/clk/samsung.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <asm/irq.h>
-#include <asm/cacheflush.h>
-#include <asm/system_info.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/dma.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pwm-core.h>
-
-#include "common.h"
-
-/* table of supported CPUs */
-
-static const char name_s3c2410[] = "S3C2410";
-static const char name_s3c2412[] = "S3C2412";
-static const char name_s3c2416[] = "S3C2416/S3C2450";
-static const char name_s3c2440[] = "S3C2440";
-static const char name_s3c2442[] = "S3C2442";
-static const char name_s3c2442b[] = "S3C2442B";
-static const char name_s3c2443[] = "S3C2443";
-static const char name_s3c2410a[] = "S3C2410A";
-static const char name_s3c2440a[] = "S3C2440A";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = 0x32410000,
- .idmask = 0xffffffff,
- .map_io = s3c2410_map_io,
- .init_uarts = s3c2410_init_uarts,
- .init = s3c2410_init,
- .name = name_s3c2410
- },
- {
- .idcode = 0x32410002,
- .idmask = 0xffffffff,
- .map_io = s3c2410_map_io,
- .init_uarts = s3c2410_init_uarts,
- .init = s3c2410a_init,
- .name = name_s3c2410a
- },
- {
- .idcode = 0x32440000,
- .idmask = 0xffffffff,
- .map_io = s3c2440_map_io,
- .init_uarts = s3c244x_init_uarts,
- .init = s3c2440_init,
- .name = name_s3c2440
- },
- {
- .idcode = 0x32440001,
- .idmask = 0xffffffff,
- .map_io = s3c2440_map_io,
- .init_uarts = s3c244x_init_uarts,
- .init = s3c2440_init,
- .name = name_s3c2440a
- },
- {
- .idcode = 0x32440aaa,
- .idmask = 0xffffffff,
- .map_io = s3c2442_map_io,
- .init_uarts = s3c244x_init_uarts,
- .init = s3c2442_init,
- .name = name_s3c2442
- },
- {
- .idcode = 0x32440aab,
- .idmask = 0xffffffff,
- .map_io = s3c2442_map_io,
- .init_uarts = s3c244x_init_uarts,
- .init = s3c2442_init,
- .name = name_s3c2442b
- },
- {
- .idcode = 0x32412001,
- .idmask = 0xffffffff,
- .map_io = s3c2412_map_io,
- .init_uarts = s3c2412_init_uarts,
- .init = s3c2412_init,
- .name = name_s3c2412,
- },
- { /* a newer version of the s3c2412 */
- .idcode = 0x32412003,
- .idmask = 0xffffffff,
- .map_io = s3c2412_map_io,
- .init_uarts = s3c2412_init_uarts,
- .init = s3c2412_init,
- .name = name_s3c2412,
- },
- { /* a strange version of the s3c2416 */
- .idcode = 0x32450003,
- .idmask = 0xffffffff,
- .map_io = s3c2416_map_io,
- .init_uarts = s3c2416_init_uarts,
- .init = s3c2416_init,
- .name = name_s3c2416,
- },
- {
- .idcode = 0x32443001,
- .idmask = 0xffffffff,
- .map_io = s3c2443_map_io,
- .init_uarts = s3c2443_init_uarts,
- .init = s3c2443_init,
- .name = name_s3c2443,
- },
-};
-
-/* minimal IO mapping */
-
-static struct map_desc s3c_iodesc[] __initdata = {
- IODESC_ENT(GPIO),
- IODESC_ENT(IRQ),
- IODESC_ENT(MEMCTRL),
- IODESC_ENT(UART)
-};
-
-/* read cpu identificaiton code */
-
-static unsigned long s3c24xx_read_idcode_v5(void)
-{
-#if defined(CONFIG_CPU_S3C2416)
- /* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */
-
- u32 gs = __raw_readl(S3C24XX_GSTATUS1);
-
- /* test for s3c2416 or similar device */
- if ((gs >> 16) == 0x3245)
- return gs;
-#endif
-
-#if defined(CONFIG_CPU_S3C2412)
- return __raw_readl(S3C2412_GSTATUS1);
-#else
- return 1UL; /* don't look like an 2400 */
-#endif
-}
-
-static unsigned long s3c24xx_read_idcode_v4(void)
-{
- return __raw_readl(S3C2410_GSTATUS1);
-}
-
-static void s3c24xx_default_idle(void)
-{
- unsigned long tmp = 0;
- int i;
-
- /* idle the system by using the idle mode which will wait for an
- * interrupt to happen before restarting the system.
- */
-
- /* Warning: going into idle state upsets jtag scanning */
-
- __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
- S3C2410_CLKCON);
-
- /* the samsung port seems to do a loop and then unset idle.. */
- for (i = 0; i < 50; i++)
- tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
-
- /* this bit is not cleared on re-start... */
-
- __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
- S3C2410_CLKCON);
-}
-
-static struct samsung_pwm_variant s3c24xx_pwm_variant = {
- .bits = 16,
- .div_base = 1,
- .has_tint_cstat = false,
- .tclk_mask = (1 << 4),
-};
-
-void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
-{
- arm_pm_idle = s3c24xx_default_idle;
-
- /* initialise the io descriptors we need for initialisation */
- iotable_init(mach_desc, size);
- iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
-
- if (cpu_architecture() >= CPU_ARCH_ARMv5) {
- samsung_cpu_id = s3c24xx_read_idcode_v5();
- } else {
- samsung_cpu_id = s3c24xx_read_idcode_v4();
- }
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-
- samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
-}
-
-void __init samsung_set_timer_source(unsigned int event, unsigned int source)
-{
- s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
- s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
-}
-
-void __init samsung_timer_init(void)
-{
- unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
- IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
- };
-
- samsung_pwm_clocksource_init(S3C_VA_TIMER,
- timer_irqs, &s3c24xx_pwm_variant);
-}
-
-/* Serial port registrations */
-
-#define S3C2410_PA_UART0 (S3C24XX_PA_UART)
-#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 )
-#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 )
-#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 )
-
-static struct resource s3c2410_uart0_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K),
- [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \
- IRQ_S3CUART_ERR0 - IRQ_S3CUART_RX0 + 1, \
- NULL, IORESOURCE_IRQ)
-};
-
-static struct resource s3c2410_uart1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_PA_UART1, SZ_16K),
- [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX1, \
- IRQ_S3CUART_ERR1 - IRQ_S3CUART_RX1 + 1, \
- NULL, IORESOURCE_IRQ)
-};
-
-static struct resource s3c2410_uart2_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_PA_UART2, SZ_16K),
- [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX2, \
- IRQ_S3CUART_ERR2 - IRQ_S3CUART_RX2 + 1, \
- NULL, IORESOURCE_IRQ)
-};
-
-static struct resource s3c2410_uart3_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2443_PA_UART3, SZ_16K),
- [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX3, \
- IRQ_S3CUART_ERR3 - IRQ_S3CUART_RX3 + 1, \
- NULL, IORESOURCE_IRQ)
-};
-
-struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
- [0] = {
- .resources = s3c2410_uart0_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
- },
- [1] = {
- .resources = s3c2410_uart1_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
- },
- [2] = {
- .resources = s3c2410_uart2_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
- },
- [3] = {
- .resources = s3c2410_uart3_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
- },
-};
-
-#define s3c24xx_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
-
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
- defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-static struct resource s3c2410_dma_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
- [1] = DEFINE_RES_IRQ(IRQ_DMA0),
- [2] = DEFINE_RES_IRQ(IRQ_DMA1),
- [3] = DEFINE_RES_IRQ(IRQ_DMA2),
- [4] = DEFINE_RES_IRQ(IRQ_DMA3),
-};
-#endif
-
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442)
-static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
- [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
- [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
- [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
- S3C24XX_DMA_CHANREQ(2, 2) |
- S3C24XX_DMA_CHANREQ(1, 3),
- },
- [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
- [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
- [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
- [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
- [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
- [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
- S3C24XX_DMA_CHANREQ(3, 2) |
- S3C24XX_DMA_CHANREQ(3, 3),
- },
- [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
- S3C24XX_DMA_CHANREQ(1, 2),
- },
- [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), },
- [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
- [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
- [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
- [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
-};
-
-static const struct dma_slave_map s3c2410_dma_slave_map[] = {
- { "s3c2410-sdi", "rx-tx", (void *)DMACH_SDI },
- { "s3c2410-spi.0", "rx", (void *)DMACH_SPI0_RX },
- { "s3c2410-spi.0", "tx", (void *)DMACH_SPI0_TX },
- { "s3c2410-spi.1", "rx", (void *)DMACH_SPI1_RX },
- { "s3c2410-spi.1", "tx", (void *)DMACH_SPI1_TX },
- /*
- * The DMA request source[1] (DMACH_UARTx_SRC2) are
- * not used in the UART driver.
- */
- { "s3c2410-uart.0", "rx", (void *)DMACH_UART0 },
- { "s3c2410-uart.0", "tx", (void *)DMACH_UART0 },
- { "s3c2410-uart.1", "rx", (void *)DMACH_UART1 },
- { "s3c2410-uart.1", "tx", (void *)DMACH_UART1 },
- { "s3c2410-uart.2", "rx", (void *)DMACH_UART2 },
- { "s3c2410-uart.2", "tx", (void *)DMACH_UART2 },
- { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
- { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
- { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
- { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
- { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
- { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
- { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
- { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
- { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
- { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
-};
-
-static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
- .num_phy_channels = 4,
- .channels = s3c2410_dma_channels,
- .num_channels = DMACH_MAX,
- .slave_map = s3c2410_dma_slave_map,
- .slavecnt = ARRAY_SIZE(s3c2410_dma_slave_map),
-};
-
-struct platform_device s3c2410_device_dma = {
- .name = "s3c2410-dma",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c2410_dma_resource),
- .resource = s3c2410_dma_resource,
- .dev = {
- .dma_mask = &s3c24xx_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s3c2410_dma_platdata,
- },
-};
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
- [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
- [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
- [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
- [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
- [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
- [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
- [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
- [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
- [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
- [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
- [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
- [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
- [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
- [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
- [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
- [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
- [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 },
- [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 },
- [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 },
- [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
-};
-
-static const struct dma_slave_map s3c2412_dma_slave_map[] = {
- { "s3c2412-sdi", "rx-tx", (void *)DMACH_SDI },
- { "s3c2412-spi.0", "rx", (void *)DMACH_SPI0_RX },
- { "s3c2412-spi.0", "tx", (void *)DMACH_SPI0_TX },
- { "s3c2412-spi.1", "rx", (void *)DMACH_SPI1_RX },
- { "s3c2412-spi.1", "tx", (void *)DMACH_SPI1_TX },
- { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
- { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
- { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
- { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
- { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
- { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
- { "s3c2412-iis", "rx", (void *)DMACH_I2S_IN },
- { "s3c2412-iis", "tx", (void *)DMACH_I2S_OUT },
- { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
- { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
- { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
- { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
- { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
- { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
- { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
- { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
-};
-
-static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
- .num_phy_channels = 4,
- .channels = s3c2412_dma_channels,
- .num_channels = DMACH_MAX,
- .slave_map = s3c2412_dma_slave_map,
- .slavecnt = ARRAY_SIZE(s3c2412_dma_slave_map),
-};
-
-struct platform_device s3c2412_device_dma = {
- .name = "s3c2412-dma",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c2410_dma_resource),
- .resource = s3c2410_dma_resource,
- .dev = {
- .dma_mask = &s3c24xx_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s3c2412_dma_platdata,
- },
-};
-#endif
-
-#if defined(CONFIG_CPU_S3C2440)
-static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
- [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
- [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
- [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
- S3C24XX_DMA_CHANREQ(6, 1) |
- S3C24XX_DMA_CHANREQ(2, 2) |
- S3C24XX_DMA_CHANREQ(1, 3),
- },
- [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
- [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
- [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
- [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
- [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
- [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
- S3C24XX_DMA_CHANREQ(3, 2) |
- S3C24XX_DMA_CHANREQ(3, 3),
- },
- [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
- S3C24XX_DMA_CHANREQ(1, 2),
- },
- [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) |
- S3C24XX_DMA_CHANREQ(0, 2),
- },
- [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) |
- S3C24XX_DMA_CHANREQ(5, 2),
- },
- [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) |
- S3C24XX_DMA_CHANREQ(6, 3),
- },
- [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) |
- S3C24XX_DMA_CHANREQ(5, 3),
- },
- [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
- [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
- [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
- [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
-};
-
-static const struct dma_slave_map s3c2440_dma_slave_map[] = {
- /* TODO: DMACH_XD0 */
- /* TODO: DMACH_XD1 */
- { "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
- { "s3c2410-spi.0", "rx", (void *)DMACH_SPI0 },
- { "s3c2410-spi.0", "tx", (void *)DMACH_SPI0 },
- { "s3c2410-spi.1", "rx", (void *)DMACH_SPI1 },
- { "s3c2410-spi.1", "tx", (void *)DMACH_SPI1 },
- { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
- { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
- { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
- { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
- { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
- { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
- { "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
- { "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
- /* TODO: DMACH_TIMER */
- { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
- { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
- { "samsung-ac97", "rx", (void *)DMACH_PCM_IN },
- { "samsung-ac97", "tx", (void *)DMACH_PCM_OUT },
- { "samsung-ac97", "rx", (void *)DMACH_MIC_IN },
- { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
- { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
- { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
- { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
- { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
- { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
- { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
- { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
-};
-
-static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
- .num_phy_channels = 4,
- .channels = s3c2440_dma_channels,
- .num_channels = DMACH_MAX,
- .slave_map = s3c2440_dma_slave_map,
- .slavecnt = ARRAY_SIZE(s3c2440_dma_slave_map),
-};
-
-struct platform_device s3c2440_device_dma = {
- .name = "s3c2410-dma",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c2410_dma_resource),
- .resource = s3c2410_dma_resource,
- .dev = {
- .dma_mask = &s3c24xx_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s3c2440_dma_platdata,
- },
-};
-#endif
-
-#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
-static struct resource s3c2443_dma_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
- [1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
- [2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
- [3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
- [4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
- [5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
- [6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
-};
-
-static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
- [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
- [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
- [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
- [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
- [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
- [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
- [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
- [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
- [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
- [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
- [DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 },
- [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
- [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
- [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
- [DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 },
- [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
- [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
- [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
- [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 },
- [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 },
- [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
-};
-
-static const struct dma_slave_map s3c2443_dma_slave_map[] = {
- { "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
- { "s3c2443-spi.0", "rx", (void *)DMACH_SPI0_RX },
- { "s3c2443-spi.0", "tx", (void *)DMACH_SPI0_TX },
- { "s3c2443-spi.1", "rx", (void *)DMACH_SPI1_RX },
- { "s3c2443-spi.1", "tx", (void *)DMACH_SPI1_TX },
- { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
- { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
- { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
- { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
- { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
- { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
- { "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
- { "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
- { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
- { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
-};
-
-static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
- .num_phy_channels = 6,
- .channels = s3c2443_dma_channels,
- .num_channels = DMACH_MAX,
- .slave_map = s3c2443_dma_slave_map,
- .slavecnt = ARRAY_SIZE(s3c2443_dma_slave_map),
-};
-
-struct platform_device s3c2443_device_dma = {
- .name = "s3c2443-dma",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c2443_dma_resource),
- .resource = s3c2443_dma_resource,
- .dev = {
- .dma_mask = &s3c24xx_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s3c2443_dma_platdata,
- },
-};
-#endif
-
-#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410)
-void __init s3c2410_init_clocks(int xtal)
-{
- s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-void __init s3c2412_init_clocks(int xtal)
-{
- s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2416
-void __init s3c2416_init_clocks(int xtal)
-{
- s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440)
-void __init s3c2440_init_clocks(int xtal)
-{
- s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442)
-void __init s3c2442_init_clocks(int xtal)
-{
- s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-void __init s3c2443_init_clocks(int xtal)
-{
- s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \
- defined(CONFIG_CPU_S3C2442)
-static struct resource s3c2410_dclk_resource[] = {
- [0] = DEFINE_RES_MEM(0x56000084, 0x4),
-};
-
-static struct s3c2410_clk_platform_data s3c_clk_platform_data = {
- .modify_misccr = s3c2410_modify_misccr,
-};
-
-struct platform_device s3c2410_device_dclk = {
- .name = "s3c2410-dclk",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c2410_dclk_resource),
- .resource = s3c2410_dclk_resource,
- .dev = {
- .platform_data = &s3c_clk_platform_data,
- },
-};
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common Header for S3C24XX SoCs
- */
-
-#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
-#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
-
-#include <linux/reboot.h>
-#include <mach/irqs.h>
-
-struct s3c2410_uartcfg;
-
-#ifdef CONFIG_CPU_S3C2410
-extern int s3c2410_init(void);
-extern int s3c2410a_init(void);
-extern void s3c2410_map_io(void);
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c2410_init_clocks(int xtal);
-extern void s3c2410_init_irq(void);
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#define s3c2410a_init NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-extern int s3c2412_init(void);
-extern void s3c2412_map_io(void);
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c2412_init_clocks(int xtal);
-extern int s3c2412_baseclk_add(void);
-extern void s3c2412_init_irq(void);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2416
-extern int s3c2416_init(void);
-extern void s3c2416_map_io(void);
-extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c2416_init_clocks(int xtal);
-extern int s3c2416_baseclk_add(void);
-extern void s3c2416_init_irq(void);
-
-extern struct syscore_ops s3c2416_irq_syscore_ops;
-#else
-#define s3c2416_init_clocks NULL
-#define s3c2416_init_uarts NULL
-#define s3c2416_map_io NULL
-#define s3c2416_init NULL
-#endif
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-extern void s3c244x_map_io(void);
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-#else
-#define s3c244x_init_uarts NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-extern int s3c2440_init(void);
-extern void s3c2440_map_io(void);
-extern void s3c2440_init_clocks(int xtal);
-extern void s3c2440_init_irq(void);
-#else
-#define s3c2440_init NULL
-#define s3c2440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-extern int s3c2442_init(void);
-extern void s3c2442_map_io(void);
-extern void s3c2442_init_clocks(int xtal);
-extern void s3c2442_init_irq(void);
-#else
-#define s3c2442_init NULL
-#define s3c2442_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-extern int s3c2443_init(void);
-extern void s3c2443_map_io(void);
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c2443_init_clocks(int xtal);
-extern int s3c2443_baseclk_add(void);
-extern void s3c2443_init_irq(void);
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#endif
-
-extern struct syscore_ops s3c24xx_irq_syscore_ops;
-
-extern struct platform_device s3c2410_device_dma;
-extern struct platform_device s3c2412_device_dma;
-extern struct platform_device s3c2440_device_dma;
-extern struct platform_device s3c2443_device_dma;
-
-extern struct platform_device s3c2410_device_dclk;
-
-enum samsung_timer_mode {
- SAMSUNG_PWM0,
- SAMSUNG_PWM1,
- SAMSUNG_PWM2,
- SAMSUNG_PWM3,
- SAMSUNG_PWM4,
-};
-
-extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
- enum samsung_timer_mode source);
-extern void __init samsung_timer_init(void);
-
-#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009 Simtec Electronics
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>
-//
-// S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-
-#include "regs-mem.h"
-
-/**
- * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
- * @cfg: The frequency configuration
- *
- * Set the SDRAM refresh value appropriately for the configured
- * frequency.
- */
-void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
- struct s3c_cpufreq_board *board = cfg->board;
- unsigned long refresh;
- unsigned long refval;
-
- /* Reduce both the refresh time (in ns) and the frequency (in MHz)
- * down to ensure that we do not overflow 32 bit numbers.
- *
- * This should work for HCLK up to 133MHz and refresh period up
- * to 30usec.
- */
-
- refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
- refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
- refresh = (1 << 11) + 1 - refresh;
-
- s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
-
- refval = __raw_readl(S3C2410_REFRESH);
- refval &= ~((1 << 12) - 1);
- refval |= refresh;
- __raw_writel(refval, S3C2410_REFRESH);
-}
-
-/**
- * s3c2410_set_fvco - set the PLL value
- * @cfg: The frequency configuration
- */
-void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
-{
- if (!IS_ERR(cfg->mpll))
- clk_set_rate(cfg->mpll, cfg->pll.frequency);
-}
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-u32 s3c2440_read_camdivn(void)
-{
- return __raw_readl(S3C2440_CAMDIVN);
-}
-
-void s3c2440_write_camdivn(u32 camdiv)
-{
- __raw_writel(camdiv, S3C2440_CAMDIVN);
-}
-#endif
-
-u32 s3c24xx_read_clkdivn(void)
-{
- return __raw_readl(S3C2410_CLKDIVN);
-}
-
-void s3c24xx_write_clkdivn(u32 clkdiv)
-{
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
-}
-
-u32 s3c24xx_read_mpllcon(void)
-{
- return __raw_readl(S3C2410_MPLLCON);
-}
-
-void s3c24xx_write_locktime(u32 locktime)
-{
- return __raw_writel(locktime, S3C2410_LOCKTIME);
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2010 Samsung Electronics Co., Ltd.
- * Pawel Osciak <p.osciak@samsung.com>
- *
- * Samsung framebuffer driver core functions
- */
-#ifndef __ASM_PLAT_FB_CORE_H
-#define __ASM_PLAT_FB_CORE_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name depending on support. */
-static inline void s3c_fb_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_FB
- s3c_device_fb.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_FB_CORE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * GTA02 header
- */
-
-#ifndef __MACH_S3C24XX_GTA02_H
-#define __MACH_S3C24XX_GTA02_H __FILE__
-
-#include <mach/regs-gpio.h>
-
-#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
-#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
-#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6)
-#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7)
-#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
-
-#define GTA02_IRQ_PCF50633 IRQ_EINT9
-
-#endif /* __MACH_S3C24XX_GTA02_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-1.0+
-//
-// Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org>
-//
-// S3C2410 bluetooth "driver"
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/rfkill.h>
-
-#include <plat/gpio-cfg.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include "h1940.h"
-
-#define DRV_NAME "h1940-bt"
-
-/* Bluetooth control */
-static void h1940bt_enable(int on)
-{
- if (on) {
- /* Power on the chip */
- gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1);
- /* Reset the chip */
- mdelay(10);
-
- gpio_set_value(S3C2410_GPH(1), 1);
- mdelay(10);
- gpio_set_value(S3C2410_GPH(1), 0);
-
- h1940_led_blink_set(NULL, GPIO_LED_BLINK, NULL, NULL);
- }
- else {
- gpio_set_value(S3C2410_GPH(1), 1);
- mdelay(10);
- gpio_set_value(S3C2410_GPH(1), 0);
- mdelay(10);
- gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0);
-
- h1940_led_blink_set(NULL, GPIO_LED_NO_BLINK_LOW, NULL, NULL);
- }
-}
-
-static int h1940bt_set_block(void *data, bool blocked)
-{
- h1940bt_enable(!blocked);
- return 0;
-}
-
-static const struct rfkill_ops h1940bt_rfkill_ops = {
- .set_block = h1940bt_set_block,
-};
-
-static int h1940bt_probe(struct platform_device *pdev)
-{
- struct rfkill *rfk;
- int ret = 0;
-
- ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev));
- if (ret) {
- dev_err(&pdev->dev, "could not get GPH1\n");
- return ret;
- }
-
- ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev));
- if (ret) {
- gpio_free(S3C2410_GPH(1));
- dev_err(&pdev->dev, "could not get BT_POWER\n");
- return ret;
- }
-
- /* Configures BT serial port GPIOs */
- s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
- s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
- s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
- s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
- s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
-
- rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
- &h1940bt_rfkill_ops, NULL);
- if (!rfk) {
- ret = -ENOMEM;
- goto err_rfk_alloc;
- }
-
- ret = rfkill_register(rfk);
- if (ret)
- goto err_rfkill;
-
- platform_set_drvdata(pdev, rfk);
-
- return 0;
-
-err_rfkill:
- rfkill_destroy(rfk);
-err_rfk_alloc:
- return ret;
-}
-
-static int h1940bt_remove(struct platform_device *pdev)
-{
- struct rfkill *rfk = platform_get_drvdata(pdev);
-
- platform_set_drvdata(pdev, NULL);
- gpio_free(S3C2410_GPH(1));
-
- if (rfk) {
- rfkill_unregister(rfk);
- rfkill_destroy(rfk);
- }
- rfk = NULL;
-
- h1940bt_enable(0);
-
- return 0;
-}
-
-
-static struct platform_driver h1940bt_driver = {
- .driver = {
- .name = DRV_NAME,
- },
- .probe = h1940bt_probe,
- .remove = h1940bt_remove,
-};
-
-module_platform_driver(h1940bt_driver);
-
-MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
-MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * Copyright (c) 2005 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * iPAQ H1940 series definitions
- */
-
-#ifndef __MACH_S3C24XX_H1940_H
-#define __MACH_S3C24XX_H1940_H __FILE__
-
-#define H1940_SUSPEND_CHECKSUM (0x30003ff8)
-#define H1940_SUSPEND_RESUMEAT (0x30081000)
-#define H1940_SUSPEND_CHECK (0x30080000)
-
-struct gpio_desc;
-
-extern void h1940_pm_return(void);
-extern int h1940_led_blink_set(struct gpio_desc *desc, int state,
- unsigned long *delay_on,
- unsigned long *delay_off);
-
-#include <linux/gpio.h>
-
-#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x))
-
-/* SD layer latch */
-
-#define H1940_LATCH_LCD_P0 H1940_LATCH_GPIO(0)
-#define H1940_LATCH_LCD_P1 H1940_LATCH_GPIO(1)
-#define H1940_LATCH_LCD_P2 H1940_LATCH_GPIO(2)
-#define H1940_LATCH_LCD_P3 H1940_LATCH_GPIO(3)
-#define H1940_LATCH_MAX1698_nSHUTDOWN H1940_LATCH_GPIO(4)
-#define H1940_LATCH_LED_RED H1940_LATCH_GPIO(5)
-#define H1940_LATCH_SDQ7 H1940_LATCH_GPIO(6)
-#define H1940_LATCH_USB_DP H1940_LATCH_GPIO(7)
-
-/* CPU layer latch */
-
-#define H1940_LATCH_UDA_POWER H1940_LATCH_GPIO(8)
-#define H1940_LATCH_AUDIO_POWER H1940_LATCH_GPIO(9)
-#define H1940_LATCH_SM803_ENABLE H1940_LATCH_GPIO(10)
-#define H1940_LATCH_LCD_P4 H1940_LATCH_GPIO(11)
-#define H1940_LATCH_SD_POWER H1940_LATCH_GPIO(12)
-#define H1940_LATCH_BLUETOOTH_POWER H1940_LATCH_GPIO(13)
-#define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14)
-#define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15)
-
-#endif /* __MACH_S3C24XX_H1940_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2003-2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#include <linux/device.h>
-
-/* We use `virtual` dma channels to hide the fact we have only a limited
- * number of DMA channels, and not of all of them (dependent on the device)
- * can be attached to any DMA source. We therefore let the DMA core handle
- * the allocation of hardware channels to clients.
-*/
-
-enum dma_ch {
- DMACH_XD0 = 0,
- DMACH_XD1,
- DMACH_SDI,
- DMACH_SPI0,
- DMACH_SPI1,
- DMACH_UART0,
- DMACH_UART1,
- DMACH_UART2,
- DMACH_TIMER,
- DMACH_I2S_IN,
- DMACH_I2S_OUT,
- DMACH_PCM_IN,
- DMACH_PCM_OUT,
- DMACH_MIC_IN,
- DMACH_USB_EP1,
- DMACH_USB_EP2,
- DMACH_USB_EP3,
- DMACH_USB_EP4,
- DMACH_UART0_SRC2, /* s3c2412 second uart sources */
- DMACH_UART1_SRC2,
- DMACH_UART2_SRC2,
- DMACH_UART3, /* s3c2443 has extra uart */
- DMACH_UART3_SRC2,
- DMACH_SPI0_TX, /* s3c2443/2416/2450 hsspi0 */
- DMACH_SPI0_RX, /* s3c2443/2416/2450 hsspi0 */
- DMACH_SPI1_TX, /* s3c2443/2450 hsspi1 */
- DMACH_SPI1_RX, /* s3c2443/2450 hsspi1 */
- DMACH_MAX, /* the end entry */
-};
-
-#endif /* __ASM_ARCH_DMA_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO lib support
- */
-
-/* some boards require extra gpio capacity to support external
- * devices that need GPIO.
- */
-
-#ifndef GPIO_SAMSUNG_S3C24XX_H
-#define GPIO_SAMSUNG_S3C24XX_H
-
-#include <mach/map.h>
-
-/*
- * GPIO sizes for various SoCs:
- *
- * 2410 2412 2440 2443 2416
- * 2442
- * ---- ---- ---- ---- ----
- * A 23 22 25 16 27
- * B 11 11 11 11 11
- * C 16 16 16 16 16
- * D 16 16 16 16 16
- * E 16 16 16 16 16
- * F 8 8 8 8 8
- * G 16 16 16 16 8
- * H 11 11 11 15 15
- * J -- -- 13 16 --
- * K -- -- -- -- 16
- * L -- -- -- 15 14
- * M -- -- -- 2 2
- */
-
-/* GPIO bank sizes */
-
-#define S3C2410_GPIO_A_NR (32)
-#define S3C2410_GPIO_B_NR (32)
-#define S3C2410_GPIO_C_NR (32)
-#define S3C2410_GPIO_D_NR (32)
-#define S3C2410_GPIO_E_NR (32)
-#define S3C2410_GPIO_F_NR (32)
-#define S3C2410_GPIO_G_NR (32)
-#define S3C2410_GPIO_H_NR (32)
-#define S3C2410_GPIO_J_NR (32) /* technically 16. */
-#define S3C2410_GPIO_K_NR (32) /* technically 16. */
-#define S3C2410_GPIO_L_NR (32) /* technically 15. */
-#define S3C2410_GPIO_M_NR (32) /* technically 2. */
-
-#if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
-#endif
-
-#define S3C2410_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
-
-#ifndef __ASSEMBLY__
-
-enum s3c_gpio_number {
- S3C2410_GPIO_A_START = 0,
- S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
- S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
- S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
- S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
- S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
- S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
- S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
- S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
- S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
- S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
- S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
-};
-
-#endif /* __ASSEMBLY__ */
-
-/* S3C2410 GPIO number definitions. */
-
-#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr))
-#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr))
-#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr))
-#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr))
-#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr))
-#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr))
-#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr))
-#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr))
-#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr))
-#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr))
-#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr))
-#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr))
-
-#ifdef CONFIG_CPU_S3C244X
-#define S3C_GPIO_END (S3C2410_GPJ(0) + 32)
-#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
-#define S3C_GPIO_END (S3C2410_GPM(0) + 32)
-#else
-#define S3C_GPIO_END (S3C2410_GPH(0) + 32)
-#endif
-
-#endif /* GPIO_SAMSUNG_S3C24XX_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
-
-#endif /* __ASM_ARCH_HARDWARE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-s3c2410/include/mach/io.h
- * from arch/arm/mach-rpc/include/mach/io.h
- *
- * Copyright (C) 1997 Russell King
- * (C) 2003 Simtec Electronics
-*/
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <plat/map-base.h>
-
-/*
- * ISA style IO, for each machine to sort out mappings for,
- * if it implements it. We reserve two 16M regions for ISA,
- * so the PC/104 can use separate addresses for 8-bit and
- * 16-bit port I/O.
- */
-#define PCIO_BASE S3C_ADDR(0x02000000)
-#define IO_SPACE_LIMIT 0x00ffffff
-#define S3C24XX_VA_ISA_WORD (PCIO_BASE)
-#define S3C24XX_VA_ISA_BYTE (PCIO_BASE + 0x01000000)
-
-#ifdef CONFIG_ISA
-
-#define inb(p) readb(S3C24XX_VA_ISA_BYTE + (p))
-#define inw(p) readw(S3C24XX_VA_ISA_WORD + (p))
-#define inl(p) readl(S3C24XX_VA_ISA_WORD + (p))
-
-#define outb(v,p) writeb((v), S3C24XX_VA_ISA_BYTE + (p))
-#define outw(v,p) writew((v), S3C24XX_VA_ISA_WORD + (p))
-#define outl(v,p) writel((v), S3C24XX_VA_ISA_WORD + (p))
-
-#define insb(p,d,l) readsb(S3C24XX_VA_ISA_BYTE + (p),d,l)
-#define insw(p,d,l) readsw(S3C24XX_VA_ISA_WORD + (p),d,l)
-#define insl(p,d,l) readsl(S3C24XX_VA_ISA_WORD + (p),d,l)
-
-#define outsb(p,d,l) writesb(S3C24XX_VA_ISA_BYTE + (p),d,l)
-#define outsw(p,d,l) writesw(S3C24XX_VA_ISA_WORD + (p),d,l)
-#define outsl(p,d,l) writesl(S3C24XX_VA_ISA_WORD + (p),d,l)
-
-#else
-
-#define __io(x) (PCIO_BASE + (x))
-
-#endif
-
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- */
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- */
-
-#define S3C2410_CPUIRQ_OFFSET (16)
-
-#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
-
-/* main cpu interrupts */
-#define IRQ_EINT0 S3C2410_IRQ(0) /* 16 */
-#define IRQ_EINT1 S3C2410_IRQ(1)
-#define IRQ_EINT2 S3C2410_IRQ(2)
-#define IRQ_EINT3 S3C2410_IRQ(3)
-#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */
-#define IRQ_EINT8t23 S3C2410_IRQ(5)
-#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */
-#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440,s3c2443 */
-#define IRQ_BATT_FLT S3C2410_IRQ(7)
-#define IRQ_TICK S3C2410_IRQ(8) /* 24 */
-#define IRQ_WDT S3C2410_IRQ(9) /* WDT/AC97 for s3c2443 */
-#define IRQ_TIMER0 S3C2410_IRQ(10)
-#define IRQ_TIMER1 S3C2410_IRQ(11)
-#define IRQ_TIMER2 S3C2410_IRQ(12)
-#define IRQ_TIMER3 S3C2410_IRQ(13)
-#define IRQ_TIMER4 S3C2410_IRQ(14)
-#define IRQ_UART2 S3C2410_IRQ(15)
-#define IRQ_LCD S3C2410_IRQ(16) /* 32 */
-#define IRQ_DMA0 S3C2410_IRQ(17) /* IRQ_DMA for s3c2443 */
-#define IRQ_DMA1 S3C2410_IRQ(18)
-#define IRQ_DMA2 S3C2410_IRQ(19)
-#define IRQ_DMA3 S3C2410_IRQ(20)
-#define IRQ_SDI S3C2410_IRQ(21)
-#define IRQ_SPI0 S3C2410_IRQ(22)
-#define IRQ_UART1 S3C2410_IRQ(23)
-#define IRQ_RESERVED24 S3C2410_IRQ(24) /* 40 */
-#define IRQ_NFCON S3C2410_IRQ(24) /* for s3c2440 */
-#define IRQ_USBD S3C2410_IRQ(25)
-#define IRQ_USBH S3C2410_IRQ(26)
-#define IRQ_IIC S3C2410_IRQ(27)
-#define IRQ_UART0 S3C2410_IRQ(28) /* 44 */
-#define IRQ_SPI1 S3C2410_IRQ(29)
-#define IRQ_RTC S3C2410_IRQ(30)
-#define IRQ_ADCPARENT S3C2410_IRQ(31)
-
-/* interrupts generated from the external interrupts sources */
-#define IRQ_EINT0_2412 S3C2410_IRQ(32)
-#define IRQ_EINT1_2412 S3C2410_IRQ(33)
-#define IRQ_EINT2_2412 S3C2410_IRQ(34)
-#define IRQ_EINT3_2412 S3C2410_IRQ(35)
-#define IRQ_EINT4 S3C2410_IRQ(36) /* 52 */
-#define IRQ_EINT5 S3C2410_IRQ(37)
-#define IRQ_EINT6 S3C2410_IRQ(38)
-#define IRQ_EINT7 S3C2410_IRQ(39)
-#define IRQ_EINT8 S3C2410_IRQ(40)
-#define IRQ_EINT9 S3C2410_IRQ(41)
-#define IRQ_EINT10 S3C2410_IRQ(42)
-#define IRQ_EINT11 S3C2410_IRQ(43)
-#define IRQ_EINT12 S3C2410_IRQ(44)
-#define IRQ_EINT13 S3C2410_IRQ(45)
-#define IRQ_EINT14 S3C2410_IRQ(46)
-#define IRQ_EINT15 S3C2410_IRQ(47)
-#define IRQ_EINT16 S3C2410_IRQ(48)
-#define IRQ_EINT17 S3C2410_IRQ(49)
-#define IRQ_EINT18 S3C2410_IRQ(50)
-#define IRQ_EINT19 S3C2410_IRQ(51)
-#define IRQ_EINT20 S3C2410_IRQ(52) /* 68 */
-#define IRQ_EINT21 S3C2410_IRQ(53)
-#define IRQ_EINT22 S3C2410_IRQ(54)
-#define IRQ_EINT23 S3C2410_IRQ(55)
-
-#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4)
-#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
-
-#define IRQ_LCD_FIFO S3C2410_IRQ(56)
-#define IRQ_LCD_FRAME S3C2410_IRQ(57)
-
-/* IRQs for the interal UARTs, and ADC
- * these need to be ordered in number of appearance in the
- * SUBSRC mask register
-*/
-
-#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+58)
-
-#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 74 */
-#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1)
-#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2)
-
-#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 77 */
-#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4)
-#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5)
-
-#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 80 */
-#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7)
-#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8)
-
-#define IRQ_TC S3C2410_IRQSUB(9)
-#define IRQ_ADC S3C2410_IRQSUB(10)
-
-/* extra irqs for s3c2412 */
-
-#define IRQ_S3C2412_CFSDI S3C2410_IRQ(21)
-
-#define IRQ_S3C2412_SDI S3C2410_IRQSUB(13)
-#define IRQ_S3C2412_CF S3C2410_IRQSUB(14)
-
-
-#define IRQ_S3C2416_EINT8t15 S3C2410_IRQ(5)
-#define IRQ_S3C2416_DMA S3C2410_IRQ(17)
-#define IRQ_S3C2416_UART3 S3C2410_IRQ(18)
-#define IRQ_S3C2416_SDI1 S3C2410_IRQ(20)
-#define IRQ_S3C2416_SDI0 S3C2410_IRQ(21)
-
-#define IRQ_S3C2416_LCD2 S3C2410_IRQSUB(15)
-#define IRQ_S3C2416_LCD3 S3C2410_IRQSUB(16)
-#define IRQ_S3C2416_LCD4 S3C2410_IRQSUB(17)
-#define IRQ_S3C2416_DMA0 S3C2410_IRQSUB(18)
-#define IRQ_S3C2416_DMA1 S3C2410_IRQSUB(19)
-#define IRQ_S3C2416_DMA2 S3C2410_IRQSUB(20)
-#define IRQ_S3C2416_DMA3 S3C2410_IRQSUB(21)
-#define IRQ_S3C2416_DMA4 S3C2410_IRQSUB(22)
-#define IRQ_S3C2416_DMA5 S3C2410_IRQSUB(23)
-#define IRQ_S32416_WDT S3C2410_IRQSUB(27)
-#define IRQ_S32416_AC97 S3C2410_IRQSUB(28)
-
-/* second interrupt-register of s3c2416/s3c2450 */
-
-#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 58 + 29)
-#define IRQ_S3C2416_2D S3C2416_IRQ(0)
-#define IRQ_S3C2416_IIC1 S3C2416_IRQ(1)
-#define IRQ_S3C2416_RESERVED2 S3C2416_IRQ(2)
-#define IRQ_S3C2416_RESERVED3 S3C2416_IRQ(3)
-#define IRQ_S3C2416_PCM0 S3C2416_IRQ(4)
-#define IRQ_S3C2416_PCM1 S3C2416_IRQ(5)
-#define IRQ_S3C2416_I2S0 S3C2416_IRQ(6)
-#define IRQ_S3C2416_I2S1 S3C2416_IRQ(7)
-
-/* extra irqs for s3c2440 */
-
-#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */
-#define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */
-#define IRQ_S3C2440_WDT S3C2410_IRQSUB(13)
-#define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14)
-
-/* irqs for s3c2443 */
-
-#define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */
-#define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */
-#define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */
-#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */
-#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */
-
-#define IRQ_S3C2416_HSMMC0 S3C2410_IRQ(21) /* S3C2416/S3C2450 */
-
-#define IRQ_HSMMC0 IRQ_S3C2416_HSMMC0
-#define IRQ_HSMMC1 IRQ_S3C2443_HSMMC
-
-#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14)
-#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15)
-#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16)
-#define IRQ_S3C2443_LCD4 S3C2410_IRQSUB(17)
-
-#define IRQ_S3C2443_DMA0 S3C2410_IRQSUB(18)
-#define IRQ_S3C2443_DMA1 S3C2410_IRQSUB(19)
-#define IRQ_S3C2443_DMA2 S3C2410_IRQSUB(20)
-#define IRQ_S3C2443_DMA3 S3C2410_IRQSUB(21)
-#define IRQ_S3C2443_DMA4 S3C2410_IRQSUB(22)
-#define IRQ_S3C2443_DMA5 S3C2410_IRQSUB(23)
-
-/* UART3 */
-#define IRQ_S3C2443_RX3 S3C2410_IRQSUB(24)
-#define IRQ_S3C2443_TX3 S3C2410_IRQSUB(25)
-#define IRQ_S3C2443_ERR3 S3C2410_IRQSUB(26)
-
-#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27)
-#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28)
-
-#if defined(CONFIG_CPU_S3C2416)
-#define NR_IRQS (IRQ_S3C2416_I2S1 + 1)
-#else
-#define NR_IRQS (IRQ_S3C2443_AC97 + 1)
-#endif
-
-/* compatibility define. */
-#define IRQ_UART3 IRQ_S3C2443_UART3
-#define IRQ_S3CUART_RX3 IRQ_S3C2443_RX3
-#define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3
-#define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3
-
-#define IRQ_LCD_VSYNC IRQ_S3C2443_LCD3
-#define IRQ_LCD_SYSTEM IRQ_S3C2443_LCD2
-
-#ifdef CONFIG_CPU_S3C2440
-#define IRQ_S3C244X_AC97 IRQ_S3C2440_AC97
-#else
-#define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97
-#endif
-
-/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
-#define FIQ_START IRQ_EINT0
-
-#endif /* __ASM_ARCH_IRQ_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - Memory map definitions
- */
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H
-
-#include <plat/map-base.h>
-#include <plat/map-s3c.h>
-
-/*
- * interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C2410_PA_IRQ (0x4A000000)
-#define S3C24XX_SZ_IRQ SZ_1M
-
-/* memory controller registers */
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
-/* Timers */
-#define S3C2410_PA_TIMER (0x51000000)
-#define S3C24XX_SZ_TIMER SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_SZ_CLKPWR SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV (0x52000000)
-#define S3C24XX_SZ_USBDEV SZ_1M
-
-/* Watchdog */
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
-
-/* Standard size definitions for peripheral blocks. */
-
-#define S3C24XX_SZ_UART SZ_1M
-#define S3C24XX_SZ_IIS SZ_1M
-#define S3C24XX_SZ_ADC SZ_1M
-#define S3C24XX_SZ_SPI SZ_1M
-#define S3C24XX_SZ_SDI SZ_1M
-#define S3C24XX_SZ_NAND SZ_1M
-#define S3C24XX_SZ_GPIO SZ_1M
-
-/* USB host controller */
-#define S3C2410_PA_USBHOST (0x49000000)
-
-/* S3C2416/S3C2443/S3C2450 High-Speed USB Gadget */
-#define S3C2416_PA_HSUDC (0x49800000)
-#define S3C2416_SZ_HSUDC (SZ_4K)
-
-/* DMA controller */
-#define S3C2410_PA_DMA (0x4B000000)
-#define S3C24XX_SZ_DMA SZ_1M
-
-/* Clock and Power management */
-#define S3C2410_PA_CLKPWR (0x4C000000)
-
-/* LCD controller */
-#define S3C2410_PA_LCD (0x4D000000)
-#define S3C24XX_SZ_LCD SZ_1M
-
-/* NAND flash controller */
-#define S3C2410_PA_NAND (0x4E000000)
-
-/* IIC hardware controller */
-#define S3C2410_PA_IIC (0x54000000)
-
-/* IIS controller */
-#define S3C2410_PA_IIS (0x55000000)
-
-/* RTC */
-#define S3C2410_PA_RTC (0x57000000)
-#define S3C24XX_SZ_RTC SZ_1M
-
-/* ADC */
-#define S3C2410_PA_ADC (0x58000000)
-
-/* SPI */
-#define S3C2410_PA_SPI (0x59000000)
-#define S3C2443_PA_SPI0 (0x52000000)
-#define S3C2443_PA_SPI1 S3C2410_PA_SPI
-#define S3C2410_SPI1 (0x20)
-#define S3C2412_SPI1 (0x100)
-
-/* SDI */
-#define S3C2410_PA_SDI (0x5A000000)
-
-/* CAMIF */
-#define S3C2440_PA_CAMIF (0x4F000000)
-#define S3C2440_SZ_CAMIF SZ_1M
-
-/* AC97 */
-
-#define S3C2440_PA_AC97 (0x5B000000)
-#define S3C2440_SZ_AC97 SZ_1M
-
-/* S3C2443/S3C2416 High-speed SD/MMC */
-#define S3C2443_PA_HSMMC (0x4A800000)
-#define S3C2416_PA_HSMMC0 (0x4AC00000)
-
-#define S3C2443_PA_FB (0x4C800000)
-
-/* S3C2412 memory and IO controls */
-#define S3C2412_PA_SSMC (0x4F000000)
-
-#define S3C2412_PA_EBI (0x48800000)
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C2410_CS0 (0x00000000)
-#define S3C2410_CS1 (0x08000000)
-#define S3C2410_CS2 (0x10000000)
-#define S3C2410_CS3 (0x18000000)
-#define S3C2410_CS4 (0x20000000)
-#define S3C2410_CS5 (0x28000000)
-#define S3C2410_CS6 (0x30000000)
-#define S3C2410_CS7 (0x38000000)
-
-#define S3C2410_SDRAM_PA (S3C2410_CS6)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ S3C2410_PA_IRQ
-#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_DMA S3C2410_PA_DMA
-#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
-#define S3C24XX_PA_LCD S3C2410_PA_LCD
-#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
-#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
-#define S3C24XX_PA_IIS S3C2410_PA_IIS
-#define S3C24XX_PA_RTC S3C2410_PA_RTC
-#define S3C24XX_PA_ADC S3C2410_PA_ADC
-#define S3C24XX_PA_SPI S3C2410_PA_SPI
-#define S3C24XX_PA_SPI1 (S3C2410_PA_SPI + S3C2410_SPI1)
-#define S3C24XX_PA_SDI S3C2410_PA_SDI
-#define S3C24XX_PA_NAND S3C2410_PA_NAND
-
-#define S3C_PA_FB S3C2443_PA_FB
-#define S3C_PA_IIC S3C2410_PA_IIC
-#define S3C_PA_USBHOST S3C2410_PA_USBHOST
-#define S3C_PA_HSMMC0 S3C2416_PA_HSMMC0
-#define S3C_PA_HSMMC1 S3C2443_PA_HSMMC
-#define S3C_PA_WDT S3C2410_PA_WATCHDOG
-#define S3C_PA_NAND S3C24XX_PA_NAND
-
-#define S3C_PA_SPI0 S3C2443_PA_SPI0
-#define S3C_PA_SPI1 S3C2443_PA_SPI1
-
-#define SAMSUNG_PA_TIMER S3C2410_PA_TIMER
-
-#endif /* __ASM_ARCH_MAP_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include "regs-clock.h"
-#include "regs-irq.h"
-#include <mach/irqs.h>
-
-static inline void s3c_pm_debug_init_uart(void)
-{
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
- unsigned long tmp = __raw_readl(S3C2410_CLKCON);
-
- /* re-start uart clocks */
- tmp |= S3C2410_CLKCON_UART0;
- tmp |= S3C2410_CLKCON_UART1;
- tmp |= S3C2410_CLKCON_UART2;
-
- __raw_writel(tmp, S3C2410_CLKCON);
- udelay(10);
-#endif
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
- __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
- __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
- /* ack any outstanding external interrupts before we go to sleep */
-
- __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
- __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
- __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
- __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
-}
-
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-static inline void s3c_pm_show_resume_irqs(int start, unsigned long which,
- unsigned long mask)
-{
- int i;
-
- which &= ~mask;
-
- for (i = 0; i <= 31; i++) {
- if (which & (1L<<i)) {
- S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
- }
- }
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
- S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
- __raw_readl(S3C2410_SRCPND),
- __raw_readl(S3C2410_EINTPEND));
-
- s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
- s3c_irqwake_intmask);
-
- s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
- s3c_irqwake_eintmask);
-}
-
-static inline void s3c_pm_restored_gpios(void) { }
-static inline void samsung_pm_saved_gpios(void) { }
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-#ifdef CONFIG_PM_SLEEP
-#define s3c_irqwake_intallow (1L << 30 | 0xfL)
-#define s3c_irqwake_eintallow (0x0000fff0L)
-#else
-#define s3c_irqwake_eintallow 0
-#define s3c_irqwake_intallow 0
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C2410 clock register definitions
- */
-
-#ifndef __ASM_ARM_REGS_CLOCK
-#define __ASM_ARM_REGS_CLOCK
-
-#include <mach/map.h>
-
-#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
-
-#define S3C2410_LOCKTIME S3C2410_CLKREG(0x00)
-#define S3C2410_MPLLCON S3C2410_CLKREG(0x04)
-#define S3C2410_UPLLCON S3C2410_CLKREG(0x08)
-#define S3C2410_CLKCON S3C2410_CLKREG(0x0C)
-#define S3C2410_CLKSLOW S3C2410_CLKREG(0x10)
-#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
-
-#define S3C2410_CLKCON_IDLE (1<<2)
-#define S3C2410_CLKCON_POWER (1<<3)
-#define S3C2410_CLKCON_NAND (1<<4)
-#define S3C2410_CLKCON_LCDC (1<<5)
-#define S3C2410_CLKCON_USBH (1<<6)
-#define S3C2410_CLKCON_USBD (1<<7)
-#define S3C2410_CLKCON_PWMT (1<<8)
-#define S3C2410_CLKCON_SDI (1<<9)
-#define S3C2410_CLKCON_UART0 (1<<10)
-#define S3C2410_CLKCON_UART1 (1<<11)
-#define S3C2410_CLKCON_UART2 (1<<12)
-#define S3C2410_CLKCON_GPIO (1<<13)
-#define S3C2410_CLKCON_RTC (1<<14)
-#define S3C2410_CLKCON_ADC (1<<15)
-#define S3C2410_CLKCON_IIC (1<<16)
-#define S3C2410_CLKCON_IIS (1<<17)
-#define S3C2410_CLKCON_SPI (1<<18)
-
-#define S3C2410_CLKDIVN_PDIVN (1<<0)
-#define S3C2410_CLKDIVN_HDIVN (1<<1)
-
-#define S3C2410_CLKSLOW_UCLK_OFF (1<<7)
-#define S3C2410_CLKSLOW_MPLL_OFF (1<<5)
-#define S3C2410_CLKSLOW_SLOW (1<<4)
-#define S3C2410_CLKSLOW_SLOWVAL(x) (x)
-#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7)
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-/* extra registers */
-#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18)
-
-#define S3C2440_CLKCON_CAMERA (1<<19)
-#define S3C2440_CLKCON_AC97 (1<<20)
-
-#define S3C2440_CLKDIVN_PDIVN (1<<0)
-#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1)
-#define S3C2440_CLKDIVN_HDIVN_1 (0<<1)
-#define S3C2440_CLKDIVN_HDIVN_2 (1<<1)
-#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1)
-#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1)
-#define S3C2440_CLKDIVN_UCLK (1<<3)
-
-#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0)
-#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4)
-#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8)
-#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9)
-#define S3C2440_CAMDIVN_DVSEN (1<<12)
-
-#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5)
-
-#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
-
-#if defined(CONFIG_CPU_S3C2412)
-
-#define S3C2412_OSCSET S3C2410_CLKREG(0x18)
-#define S3C2412_CLKSRC S3C2410_CLKREG(0x1C)
-
-#define S3C2412_PLLCON_OFF (1<<20)
-
-#define S3C2412_CLKDIVN_PDIVN (1<<2)
-#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0)
-#define S3C2412_CLKDIVN_ARMDIVN (1<<3)
-#define S3C2412_CLKDIVN_DVSEN (1<<4)
-#define S3C2412_CLKDIVN_HALFHCLK (1<<5)
-#define S3C2412_CLKDIVN_USB48DIV (1<<6)
-#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8)
-#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8)
-#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12)
-#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12)
-#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16)
-#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16)
-
-#define S3C2412_CLKCON_WDT (1<<28)
-#define S3C2412_CLKCON_SPI (1<<27)
-#define S3C2412_CLKCON_IIS (1<<26)
-#define S3C2412_CLKCON_IIC (1<<25)
-#define S3C2412_CLKCON_ADC (1<<24)
-#define S3C2412_CLKCON_RTC (1<<23)
-#define S3C2412_CLKCON_GPIO (1<<22)
-#define S3C2412_CLKCON_UART2 (1<<21)
-#define S3C2412_CLKCON_UART1 (1<<20)
-#define S3C2412_CLKCON_UART0 (1<<19)
-#define S3C2412_CLKCON_SDI (1<<18)
-#define S3C2412_CLKCON_PWMT (1<<17)
-#define S3C2412_CLKCON_USBD (1<<16)
-#define S3C2412_CLKCON_CAMCLK (1<<15)
-#define S3C2412_CLKCON_UARTCLK (1<<14)
-/* missing 13 */
-#define S3C2412_CLKCON_USB_HOST48 (1<<12)
-#define S3C2412_CLKCON_USB_DEV48 (1<<11)
-#define S3C2412_CLKCON_HCLKdiv2 (1<<10)
-#define S3C2412_CLKCON_HCLKx2 (1<<9)
-#define S3C2412_CLKCON_SDRAM (1<<8)
-/* missing 7 */
-#define S3C2412_CLKCON_USBH S3C2410_CLKCON_USBH
-#define S3C2412_CLKCON_LCDC S3C2410_CLKCON_LCDC
-#define S3C2412_CLKCON_NAND S3C2410_CLKCON_NAND
-#define S3C2412_CLKCON_DMA3 (1<<3)
-#define S3C2412_CLKCON_DMA2 (1<<2)
-#define S3C2412_CLKCON_DMA1 (1<<1)
-#define S3C2412_CLKCON_DMA0 (1<<0)
-
-/* clock sourec controls */
-
-#define S3C2412_CLKSRC_EXTCLKDIV_MASK (7 << 0)
-#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT (0)
-#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV (1<<3)
-#define S3C2412_CLKSRC_MSYSCLK_MPLL (1<<4)
-#define S3C2412_CLKSRC_USYSCLK_UPLL (1<<5)
-#define S3C2412_CLKSRC_UARTCLK_MPLL (1<<8)
-#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9)
-#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10)
-#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11)
-#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12)
-#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14)
-
-#endif /* CONFIG_CPU_S3C2412 */
-
-#define S3C2416_CLKDIV2 S3C2410_CLKREG(0x28)
-
-#endif /* __ASM_ARM_REGS_CLOCK */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * S3C2410 GPIO register definitions
- */
-
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H
-
-#include <plat/map-s3c.h>
-
-#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
-
-/* general configuration options */
-
-#define S3C2410_GPIO_LEAVE (0xFFFFFFFF)
-#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */
-#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1)
-#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */
-#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */
-#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */
-
-/* register address for the GPIO registers.
- * S3C24XX_GPIOREG2 is for the second set of registers in the
- * GPIO which move between s3c2410 and s3c2412 type systems */
-
-#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
-
-
-/* configure GPIO ports A..G */
-
-/* port A - S3C2410: 22bits, zero in bit X makes pin X output
- * 1 makes port special function, this is default
-*/
-#define S3C2410_GPACON S3C2410_GPIOREG(0x00)
-#define S3C2410_GPADAT S3C2410_GPIOREG(0x04)
-
-#define S3C2410_GPA0_ADDR0 (1<<0)
-#define S3C2410_GPA1_ADDR16 (1<<1)
-#define S3C2410_GPA2_ADDR17 (1<<2)
-#define S3C2410_GPA3_ADDR18 (1<<3)
-#define S3C2410_GPA4_ADDR19 (1<<4)
-#define S3C2410_GPA5_ADDR20 (1<<5)
-#define S3C2410_GPA6_ADDR21 (1<<6)
-#define S3C2410_GPA7_ADDR22 (1<<7)
-#define S3C2410_GPA8_ADDR23 (1<<8)
-#define S3C2410_GPA9_ADDR24 (1<<9)
-#define S3C2410_GPA10_ADDR25 (1<<10)
-#define S3C2410_GPA11_ADDR26 (1<<11)
-#define S3C2410_GPA12_nGCS1 (1<<12)
-#define S3C2410_GPA13_nGCS2 (1<<13)
-#define S3C2410_GPA14_nGCS3 (1<<14)
-#define S3C2410_GPA15_nGCS4 (1<<15)
-#define S3C2410_GPA16_nGCS5 (1<<16)
-#define S3C2410_GPA17_CLE (1<<17)
-#define S3C2410_GPA18_ALE (1<<18)
-#define S3C2410_GPA19_nFWE (1<<19)
-#define S3C2410_GPA20_nFRE (1<<20)
-#define S3C2410_GPA21_nRSTOUT (1<<21)
-#define S3C2410_GPA22_nFCE (1<<22)
-
-/* 0x08 and 0x0c are reserved on S3C2410 */
-
-/* S3C2410:
- * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
- * 00 = input, 01 = output, 10=special function, 11=reserved
-
- * bit 0,1 = pin 0, 2,3= pin 1...
- *
- * CPBUP = pull up resistor control, 1=disabled, 0=enabled
-*/
-
-#define S3C2410_GPBCON S3C2410_GPIOREG(0x10)
-#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14)
-#define S3C2410_GPBUP S3C2410_GPIOREG(0x18)
-
-/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
-
-#define S3C2410_GPB0_TOUT0 (0x02 << 0)
-
-#define S3C2410_GPB1_TOUT1 (0x02 << 2)
-
-#define S3C2410_GPB2_TOUT2 (0x02 << 4)
-
-#define S3C2410_GPB3_TOUT3 (0x02 << 6)
-
-#define S3C2410_GPB4_TCLK0 (0x02 << 8)
-#define S3C2410_GPB4_MASK (0x03 << 8)
-
-#define S3C2410_GPB5_nXBACK (0x02 << 10)
-#define S3C2443_GPB5_XBACK (0x03 << 10)
-
-#define S3C2410_GPB6_nXBREQ (0x02 << 12)
-#define S3C2443_GPB6_XBREQ (0x03 << 12)
-
-#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
-#define S3C2443_GPB7_XDACK1 (0x03 << 14)
-
-#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
-
-#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
-#define S3C2443_GPB9_XDACK0 (0x03 << 18)
-
-#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
-#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
-
-#define S3C2410_GPB_PUPDIS(x) (1<<(x))
-
-/* Port C consits of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's sync/etc.
-*/
-
-#define S3C2410_GPCCON S3C2410_GPIOREG(0x20)
-#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24)
-#define S3C2410_GPCUP S3C2410_GPIOREG(0x28)
-#define S3C2410_GPC0_LEND (0x02 << 0)
-#define S3C2410_GPC1_VCLK (0x02 << 2)
-#define S3C2410_GPC2_VLINE (0x02 << 4)
-#define S3C2410_GPC3_VFRAME (0x02 << 6)
-#define S3C2410_GPC4_VM (0x02 << 8)
-#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
-#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
-#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
-#define S3C2410_GPC8_VD0 (0x02 << 16)
-#define S3C2410_GPC9_VD1 (0x02 << 18)
-#define S3C2410_GPC10_VD2 (0x02 << 20)
-#define S3C2410_GPC11_VD3 (0x02 << 22)
-#define S3C2410_GPC12_VD4 (0x02 << 24)
-#define S3C2410_GPC13_VD5 (0x02 << 26)
-#define S3C2410_GPC14_VD6 (0x02 << 28)
-#define S3C2410_GPC15_VD7 (0x02 << 30)
-#define S3C2410_GPC_PUPDIS(x) (1<<(x))
-
-/*
- * S3C2410: Port D consists of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's data.
- *
- * almost identical setup to port c
-*/
-
-#define S3C2410_GPDCON S3C2410_GPIOREG(0x30)
-#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34)
-#define S3C2410_GPDUP S3C2410_GPIOREG(0x38)
-
-#define S3C2410_GPD0_VD8 (0x02 << 0)
-#define S3C2442_GPD0_nSPICS1 (0x03 << 0)
-
-#define S3C2410_GPD1_VD9 (0x02 << 2)
-#define S3C2442_GPD1_SPICLK1 (0x03 << 2)
-
-#define S3C2410_GPD2_VD10 (0x02 << 4)
-
-#define S3C2410_GPD3_VD11 (0x02 << 6)
-
-#define S3C2410_GPD4_VD12 (0x02 << 8)
-
-#define S3C2410_GPD5_VD13 (0x02 << 10)
-
-#define S3C2410_GPD6_VD14 (0x02 << 12)
-
-#define S3C2410_GPD7_VD15 (0x02 << 14)
-
-#define S3C2410_GPD8_VD16 (0x02 << 16)
-#define S3C2440_GPD8_SPIMISO1 (0x03 << 16)
-
-#define S3C2410_GPD9_VD17 (0x02 << 18)
-#define S3C2440_GPD9_SPIMOSI1 (0x03 << 18)
-
-#define S3C2410_GPD10_VD18 (0x02 << 20)
-#define S3C2440_GPD10_SPICLK1 (0x03 << 20)
-
-#define S3C2410_GPD11_VD19 (0x02 << 22)
-
-#define S3C2410_GPD12_VD20 (0x02 << 24)
-
-#define S3C2410_GPD13_VD21 (0x02 << 26)
-
-#define S3C2410_GPD14_VD22 (0x02 << 28)
-#define S3C2410_GPD14_nSS1 (0x03 << 28)
-
-#define S3C2410_GPD15_VD23 (0x02 << 30)
-#define S3C2410_GPD15_nSS0 (0x03 << 30)
-
-#define S3C2410_GPD_PUPDIS(x) (1<<(x))
-
-/* S3C2410:
- * Port E consists of 16 GPIO/Special function
- *
- * again, the same as port B, but dealing with I2S, SDI, and
- * more miscellaneous functions
- *
- * GPIO / interrupt inputs
-*/
-
-#define S3C2410_GPECON S3C2410_GPIOREG(0x40)
-#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44)
-#define S3C2410_GPEUP S3C2410_GPIOREG(0x48)
-
-#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
-#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
-#define S3C2410_GPE0_MASK (0x03 << 0)
-
-#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
-#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
-#define S3C2410_GPE1_MASK (0x03 << 2)
-
-#define S3C2410_GPE2_CDCLK (0x02 << 4)
-#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
-
-#define S3C2410_GPE3_I2SSDI (0x02 << 6)
-#define S3C2443_GPE3_AC_SDI (0x03 << 6)
-#define S3C2410_GPE3_nSS0 (0x03 << 6)
-#define S3C2410_GPE3_MASK (0x03 << 6)
-
-#define S3C2410_GPE4_I2SSDO (0x02 << 8)
-#define S3C2443_GPE4_AC_SDO (0x03 << 8)
-#define S3C2410_GPE4_I2SSDI (0x03 << 8)
-#define S3C2410_GPE4_MASK (0x03 << 8)
-
-#define S3C2410_GPE5_SDCLK (0x02 << 10)
-#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
-#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
-
-#define S3C2410_GPE6_SDCMD (0x02 << 12)
-#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
-#define S3C2443_GPE6_AC_SDI (0x03 << 12)
-
-#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
-#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
-#define S3C2443_GPE7_AC_SDO (0x03 << 14)
-
-#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
-#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
-#define S3C2443_GPE8_AC_SYNC (0x03 << 16)
-
-#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
-#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
-#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
-
-#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
-#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-
-#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
-
-#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
-
-#define S3C2410_GPE13_SPICLK0 (0x02 << 26)
-
-#define S3C2410_GPE14_IICSCL (0x02 << 28)
-#define S3C2410_GPE14_MASK (0x03 << 28)
-
-#define S3C2410_GPE15_IICSDA (0x02 << 30)
-#define S3C2410_GPE15_MASK (0x03 << 30)
-
-#define S3C2440_GPE0_ACSYNC (0x03 << 0)
-#define S3C2440_GPE1_ACBITCLK (0x03 << 2)
-#define S3C2440_GPE2_ACRESET (0x03 << 4)
-#define S3C2440_GPE3_ACIN (0x03 << 6)
-#define S3C2440_GPE4_ACOUT (0x03 << 8)
-
-#define S3C2410_GPE_PUPDIS(x) (1<<(x))
-
-/* S3C2410:
- * Port F consists of 8 GPIO/Special function
- *
- * GPIO / interrupt inputs
- *
- * GPFCON has 2 bits for each of the input pins on port F
- * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
- *
- * pull up works like all other ports.
- *
- * GPIO/serial/misc pins
-*/
-
-#define S3C2410_GPFCON S3C2410_GPIOREG(0x50)
-#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54)
-#define S3C2410_GPFUP S3C2410_GPIOREG(0x58)
-
-#define S3C2410_GPF0_EINT0 (0x02 << 0)
-#define S3C2410_GPF1_EINT1 (0x02 << 2)
-#define S3C2410_GPF2_EINT2 (0x02 << 4)
-#define S3C2410_GPF3_EINT3 (0x02 << 6)
-#define S3C2410_GPF4_EINT4 (0x02 << 8)
-#define S3C2410_GPF5_EINT5 (0x02 << 10)
-#define S3C2410_GPF6_EINT6 (0x02 << 12)
-#define S3C2410_GPF7_EINT7 (0x02 << 14)
-#define S3C2410_GPF_PUPDIS(x) (1<<(x))
-
-/* S3C2410:
- * Port G consists of 8 GPIO/IRQ/Special function
- *
- * GPGCON has 2 bits for each of the input pins on port G
- * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2410_GPGCON S3C2410_GPIOREG(0x60)
-#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64)
-#define S3C2410_GPGUP S3C2410_GPIOREG(0x68)
-
-#define S3C2410_GPG0_EINT8 (0x02 << 0)
-
-#define S3C2410_GPG1_EINT9 (0x02 << 2)
-
-#define S3C2410_GPG2_EINT10 (0x02 << 4)
-#define S3C2410_GPG2_nSS0 (0x03 << 4)
-
-#define S3C2410_GPG3_EINT11 (0x02 << 6)
-#define S3C2410_GPG3_nSS1 (0x03 << 6)
-
-#define S3C2410_GPG4_EINT12 (0x02 << 8)
-#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
-#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
-
-#define S3C2410_GPG5_EINT13 (0x02 << 10)
-#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
-
-#define S3C2410_GPG6_EINT14 (0x02 << 12)
-#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
-
-#define S3C2410_GPG7_EINT15 (0x02 << 14)
-#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
-
-#define S3C2410_GPG8_EINT16 (0x02 << 16)
-
-#define S3C2410_GPG9_EINT17 (0x02 << 18)
-
-#define S3C2410_GPG10_EINT18 (0x02 << 20)
-
-#define S3C2410_GPG11_EINT19 (0x02 << 22)
-#define S3C2410_GPG11_TCLK1 (0x03 << 22)
-#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
-
-#define S3C2410_GPG12_EINT20 (0x02 << 24)
-#define S3C2410_GPG12_XMON (0x03 << 24)
-#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
-#define S3C2443_GPG12_nINPACK (0x03 << 24)
-
-#define S3C2410_GPG13_EINT21 (0x02 << 26)
-#define S3C2410_GPG13_nXPON (0x03 << 26)
-#define S3C2443_GPG13_CF_nREG (0x03 << 26)
-
-#define S3C2410_GPG14_EINT22 (0x02 << 28)
-#define S3C2410_GPG14_YMON (0x03 << 28)
-#define S3C2443_GPG14_CF_RESET (0x03 << 28)
-
-#define S3C2410_GPG15_EINT23 (0x02 << 30)
-#define S3C2410_GPG15_nYPON (0x03 << 30)
-#define S3C2443_GPG15_CF_PWR (0x03 << 30)
-
-#define S3C2410_GPG_PUPDIS(x) (1<<(x))
-
-/* Port H consists of11 GPIO/serial/Misc pins
- *
- * GPHCON has 2 bits for each of the input pins on port H
- * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2410_GPHCON S3C2410_GPIOREG(0x70)
-#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74)
-#define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
-
-#define S3C2410_GPH0_nCTS0 (0x02 << 0)
-#define S3C2416_GPH0_TXD0 (0x02 << 0)
-
-#define S3C2410_GPH1_nRTS0 (0x02 << 2)
-#define S3C2416_GPH1_RXD0 (0x02 << 2)
-
-#define S3C2410_GPH2_TXD0 (0x02 << 4)
-#define S3C2416_GPH2_TXD1 (0x02 << 4)
-
-#define S3C2410_GPH3_RXD0 (0x02 << 6)
-#define S3C2416_GPH3_RXD1 (0x02 << 6)
-
-#define S3C2410_GPH4_TXD1 (0x02 << 8)
-#define S3C2416_GPH4_TXD2 (0x02 << 8)
-
-#define S3C2410_GPH5_RXD1 (0x02 << 10)
-#define S3C2416_GPH5_RXD2 (0x02 << 10)
-
-#define S3C2410_GPH6_TXD2 (0x02 << 12)
-#define S3C2416_GPH6_TXD3 (0x02 << 12)
-#define S3C2410_GPH6_nRTS1 (0x03 << 12)
-#define S3C2416_GPH6_nRTS2 (0x03 << 12)
-
-#define S3C2410_GPH7_RXD2 (0x02 << 14)
-#define S3C2416_GPH7_RXD3 (0x02 << 14)
-#define S3C2410_GPH7_nCTS1 (0x03 << 14)
-#define S3C2416_GPH7_nCTS2 (0x03 << 14)
-
-#define S3C2410_GPH8_UCLK (0x02 << 16)
-#define S3C2416_GPH8_nCTS0 (0x02 << 16)
-
-#define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
-#define S3C2442_GPH9_nSPICS0 (0x03 << 18)
-#define S3C2416_GPH9_nRTS0 (0x02 << 18)
-
-#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
-#define S3C2416_GPH10_nCTS1 (0x02 << 20)
-
-#define S3C2416_GPH11_nRTS1 (0x02 << 22)
-
-#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24)
-
-#define S3C2416_GPH13_CLKOUT0 (0x02 << 26)
-
-#define S3C2416_GPH14_CLKOUT1 (0x02 << 28)
-
-/* The S3C2412 and S3C2413 move the GPJ register set to after
- * GPH, which means all registers after 0x80 are now offset by 0x10
- * for the 2412/2413 from the 2410/2440/2442
-*/
-
-/*
- * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits
- * for each of the pins on port J.
- * 00 - input, 01 output, 10 - camera
- *
- * Pull up works like all other ports.
- */
-
-#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
-#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
-#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
-#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C)
-
-/* S3C2443 and above */
-#define S3C2440_GPJCON S3C2410_GPIOREG(0xD0)
-#define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4)
-#define S3C2440_GPJUP S3C2410_GPIOREG(0xD8)
-
-#define S3C2443_GPKCON S3C2410_GPIOREG(0xE0)
-#define S3C2443_GPKDAT S3C2410_GPIOREG(0xE4)
-#define S3C2443_GPKUP S3C2410_GPIOREG(0xE8)
-
-#define S3C2443_GPLCON S3C2410_GPIOREG(0xF0)
-#define S3C2443_GPLDAT S3C2410_GPIOREG(0xF4)
-#define S3C2443_GPLUP S3C2410_GPIOREG(0xF8)
-
-#define S3C2443_GPMCON S3C2410_GPIOREG(0x100)
-#define S3C2443_GPMDAT S3C2410_GPIOREG(0x104)
-#define S3C2443_GPMUP S3C2410_GPIOREG(0x108)
-
-/* miscellaneous control */
-#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
-
-/* see clock.h for dclk definitions */
-
-/* pullup control on databus */
-#define S3C2410_MISCCR_SPUCR_HEN (0<<0)
-#define S3C2410_MISCCR_SPUCR_HDIS (1<<0)
-#define S3C2410_MISCCR_SPUCR_LEN (0<<1)
-#define S3C2410_MISCCR_SPUCR_LDIS (1<<1)
-
-#define S3C2410_MISCCR_USBDEV (0<<3)
-#define S3C2410_MISCCR_USBHOST (1<<3)
-
-#define S3C2410_MISCCR_CLK0_MPLL (0<<4)
-#define S3C2410_MISCCR_CLK0_UPLL (1<<4)
-#define S3C2410_MISCCR_CLK0_FCLK (2<<4)
-#define S3C2410_MISCCR_CLK0_HCLK (3<<4)
-#define S3C2410_MISCCR_CLK0_PCLK (4<<4)
-#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4)
-#define S3C2410_MISCCR_CLK0_MASK (7<<4)
-
-#define S3C2412_MISCCR_CLK0_RTC (2<<4)
-
-#define S3C2410_MISCCR_CLK1_MPLL (0<<8)
-#define S3C2410_MISCCR_CLK1_UPLL (1<<8)
-#define S3C2410_MISCCR_CLK1_FCLK (2<<8)
-#define S3C2410_MISCCR_CLK1_HCLK (3<<8)
-#define S3C2410_MISCCR_CLK1_PCLK (4<<8)
-#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8)
-#define S3C2410_MISCCR_CLK1_MASK (7<<8)
-
-#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8)
-
-#define S3C2410_MISCCR_USBSUSPND0 (1<<12)
-#define S3C2416_MISCCR_SEL_SUSPND (1<<12)
-#define S3C2410_MISCCR_USBSUSPND1 (1<<13)
-
-#define S3C2410_MISCCR_nRSTCON (1<<16)
-
-#define S3C2410_MISCCR_nEN_SCLK0 (1<<17)
-#define S3C2410_MISCCR_nEN_SCLK1 (1<<18)
-#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */
-#define S3C2410_MISCCR_SDSLEEP (7<<17)
-
-#define S3C2416_MISCCR_FLT_I2C (1<<24)
-#define S3C2416_MISCCR_HSSPI_EN2 (1<<31)
-
-/* external interrupt control... */
-/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
- * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
- * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
- *
- * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
- *
- * Samsung datasheet p9-25
-*/
-#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88)
-#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C)
-#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90)
-
-#define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88)
-#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C)
-#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90)
-
-/* interrupt filtering control for EINT16..EINT23 */
-#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94)
-#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98)
-#define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C)
-#define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0)
-
-#define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94)
-#define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98)
-#define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C)
-#define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0)
-
-/* values for interrupt filtering */
-#define S3C2410_EINTFLT_PCLK (0x00)
-#define S3C2410_EINTFLT_EXTCLK (1<<7)
-#define S3C2410_EINTFLT_WIDTHMSK(x) ((x) & 0x3f)
-
-/* removed EINTxxxx defs from here, not meant for this */
-
-/* GSTATUS have miscellaneous information in them
- *
- * These move between s3c2410 and s3c2412 style systems.
- */
-
-#define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC)
-#define S3C2410_GSTATUS1 S3C2410_GPIOREG(0x0B0)
-#define S3C2410_GSTATUS2 S3C2410_GPIOREG(0x0B4)
-#define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8)
-#define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC)
-
-#define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC)
-#define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0)
-#define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4)
-#define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8)
-#define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC)
-
-#define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC)
-#define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0)
-#define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4)
-#define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8)
-#define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC)
-
-#define S3C2410_GSTATUS0_nWAIT (1<<3)
-#define S3C2410_GSTATUS0_NCON (1<<2)
-#define S3C2410_GSTATUS0_RnB (1<<1)
-#define S3C2410_GSTATUS0_nBATTFLT (1<<0)
-
-#define S3C2410_GSTATUS1_IDMASK (0xffff0000)
-#define S3C2410_GSTATUS1_2410 (0x32410000)
-#define S3C2410_GSTATUS1_2412 (0x32412001)
-#define S3C2410_GSTATUS1_2416 (0x32416003)
-#define S3C2410_GSTATUS1_2440 (0x32440000)
-#define S3C2410_GSTATUS1_2442 (0x32440aaa)
-/* some 2416 CPUs report this value also */
-#define S3C2410_GSTATUS1_2450 (0x32450003)
-
-#define S3C2410_GSTATUS2_WTRESET (1<<2)
-#define S3C2410_GSTATUS2_OFFRESET (1<<1)
-#define S3C2410_GSTATUS2_PONRESET (1<<0)
-
-/* 2412/2413 sleep configuration registers */
-
-#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C)
-#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C)
-#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C)
-#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C)
-#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C)
-#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C)
-
-/* definitions for each pin bit */
-#define S3C2412_GPIO_SLPCON_LOW ( 0x00 )
-#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
-#define S3C2412_GPIO_SLPCON_IN ( 0x02 )
-#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
-
-#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2))
-#define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2))
-#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2))
-#define S3C2412_SLPCON_PULL(x) ( 0x03 << ((x) * 2))
-#define S3C2412_SLPCON_EINT(x) ( 0x02 << ((x) * 2)) /* only IRQ pins */
-#define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2))
-
-#define S3C2412_SLPCON_ALL_LOW (0x0)
-#define S3C2412_SLPCON_ALL_HIGH (0x11111111 | 0x44444444)
-#define S3C2412_SLPCON_ALL_IN (0x22222222 | 0x88888888)
-#define S3C2412_SLPCON_ALL_PULL (0x33333333)
-
-#endif /* __ASM_ARCH_REGS_GPIO_H */
-
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- */
-
-
-#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H
-
-#include <plat/map-s3c.h>
-
-/* interrupt controller */
-
-#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ)
-#define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_EINTREG(x) ((x) + S3C24XX_VA_GPIO2)
-
-#define S3C2410_SRCPND S3C2410_IRQREG(0x000)
-#define S3C2410_INTMOD S3C2410_IRQREG(0x004)
-#define S3C2410_INTMSK S3C2410_IRQREG(0x008)
-#define S3C2410_PRIORITY S3C2410_IRQREG(0x00C)
-#define S3C2410_INTPND S3C2410_IRQREG(0x010)
-#define S3C2410_INTOFFSET S3C2410_IRQREG(0x014)
-#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018)
-#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C)
-
-#define S3C2416_PRIORITY_MODE1 S3C2410_IRQREG(0x030)
-#define S3C2416_PRIORITY_UPDATE1 S3C2410_IRQREG(0x034)
-#define S3C2416_SRCPND2 S3C2410_IRQREG(0x040)
-#define S3C2416_INTMOD2 S3C2410_IRQREG(0x044)
-#define S3C2416_INTMSK2 S3C2410_IRQREG(0x048)
-#define S3C2416_INTPND2 S3C2410_IRQREG(0x050)
-#define S3C2416_INTOFFSET2 S3C2410_IRQREG(0x054)
-#define S3C2416_PRIORITY_MODE2 S3C2410_IRQREG(0x070)
-#define S3C2416_PRIORITY_UPDATE2 S3C2410_IRQREG(0x074)
-
-/* mask: 0=enable, 1=disable
- * 1 bit EINT, 4=EINT4, 23=EINT23
- * EINT0,1,2,3 are not handled here.
-*/
-
-#define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4)
-#define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8)
-#define S3C2412_EINTMASK S3C2410_EINTREG(0x0B4)
-#define S3C2412_EINTPEND S3C2410_EINTREG(0X0B8)
-
-#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x0A4)
-#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X0A8)
-
-#endif /* ___ASM_ARCH_REGS_IRQ_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C2443 clock register definitions
- */
-
-#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
-#define __ASM_ARM_REGS_S3C2443_CLOCK
-
-#include <linux/delay.h>
-#include <plat/map-s3c.h>
-
-#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2443_PLLCON_MDIVSHIFT 16
-#define S3C2443_PLLCON_PDIVSHIFT 8
-#define S3C2443_PLLCON_SDIVSHIFT 0
-#define S3C2443_PLLCON_MDIVMASK ((1<<(1+(23-16)))-1)
-#define S3C2443_PLLCON_PDIVMASK ((1<<(1+(9-8)))-1)
-#define S3C2443_PLLCON_SDIVMASK (3)
-
-#define S3C2443_MPLLCON S3C2443_CLKREG(0x10)
-#define S3C2443_EPLLCON S3C2443_CLKREG(0x18)
-#define S3C2443_CLKSRC S3C2443_CLKREG(0x20)
-#define S3C2443_CLKDIV0 S3C2443_CLKREG(0x24)
-#define S3C2443_CLKDIV1 S3C2443_CLKREG(0x28)
-#define S3C2443_HCLKCON S3C2443_CLKREG(0x30)
-#define S3C2443_PCLKCON S3C2443_CLKREG(0x34)
-#define S3C2443_SCLKCON S3C2443_CLKREG(0x38)
-#define S3C2443_PWRMODE S3C2443_CLKREG(0x40)
-#define S3C2443_SWRST S3C2443_CLKREG(0x44)
-#define S3C2443_BUSPRI0 S3C2443_CLKREG(0x50)
-#define S3C2443_SYSID S3C2443_CLKREG(0x5C)
-#define S3C2443_PWRCFG S3C2443_CLKREG(0x60)
-#define S3C2443_RSTCON S3C2443_CLKREG(0x64)
-#define S3C2443_PHYCTRL S3C2443_CLKREG(0x80)
-#define S3C2443_PHYPWR S3C2443_CLKREG(0x84)
-#define S3C2443_URSTCON S3C2443_CLKREG(0x88)
-#define S3C2443_UCLKCON S3C2443_CLKREG(0x8C)
-
-#define S3C2443_PLLCON_OFF (1<<24)
-
-#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<7)
-#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<7)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<7)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<7)
-#define S3C2443_CLKSRC_EPLLREF_MASK (3<<7)
-
-#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3)
-
-#define S3C2443_CLKDIV0_HALF_HCLK (1<<3)
-#define S3C2443_CLKDIV0_HALF_PCLK (1<<2)
-
-#define S3C2443_CLKDIV0_HCLKDIV_MASK (3<<0)
-
-#define S3C2443_CLKDIV0_EXTDIV_MASK (3<<6)
-#define S3C2443_CLKDIV0_EXTDIV_SHIFT (6)
-
-#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4)
-#define S3C2443_CLKDIV0_PREDIV_SHIFT (4)
-
-#define S3C2416_CLKDIV0_ARMDIV_MASK (7 << 9)
-#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9)
-#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9)
-#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9)
-#define S3C2443_CLKDIV0_ARMDIV_2 (8<<9)
-#define S3C2443_CLKDIV0_ARMDIV_3 (2<<9)
-#define S3C2443_CLKDIV0_ARMDIV_4 (9<<9)
-#define S3C2443_CLKDIV0_ARMDIV_6 (10<<9)
-#define S3C2443_CLKDIV0_ARMDIV_8 (11<<9)
-#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9)
-#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9)
-
-/* S3C2443_CLKDIV1 removed, only used in clock.c code */
-
-#define S3C2443_CLKCON_NAND
-
-#define S3C2443_HCLKCON_DMA0 (1<<0)
-#define S3C2443_HCLKCON_DMA1 (1<<1)
-#define S3C2443_HCLKCON_DMA2 (1<<2)
-#define S3C2443_HCLKCON_DMA3 (1<<3)
-#define S3C2443_HCLKCON_DMA4 (1<<4)
-#define S3C2443_HCLKCON_DMA5 (1<<5)
-#define S3C2443_HCLKCON_CAMIF (1<<8)
-#define S3C2443_HCLKCON_LCDC (1<<9)
-#define S3C2443_HCLKCON_USBH (1<<11)
-#define S3C2443_HCLKCON_USBD (1<<12)
-#define S3C2416_HCLKCON_HSMMC0 (1<<15)
-#define S3C2443_HCLKCON_HSMMC (1<<16)
-#define S3C2443_HCLKCON_CFC (1<<17)
-#define S3C2443_HCLKCON_SSMC (1<<18)
-#define S3C2443_HCLKCON_DRAMC (1<<19)
-
-#define S3C2443_PCLKCON_UART0 (1<<0)
-#define S3C2443_PCLKCON_UART1 (1<<1)
-#define S3C2443_PCLKCON_UART2 (1<<2)
-#define S3C2443_PCLKCON_UART3 (1<<3)
-#define S3C2443_PCLKCON_IIC (1<<4)
-#define S3C2443_PCLKCON_SDI (1<<5)
-#define S3C2443_PCLKCON_HSSPI (1<<6)
-#define S3C2443_PCLKCON_ADC (1<<7)
-#define S3C2443_PCLKCON_AC97 (1<<8)
-#define S3C2443_PCLKCON_IIS (1<<9)
-#define S3C2443_PCLKCON_PWMT (1<<10)
-#define S3C2443_PCLKCON_WDT (1<<11)
-#define S3C2443_PCLKCON_RTC (1<<12)
-#define S3C2443_PCLKCON_GPIO (1<<13)
-#define S3C2443_PCLKCON_SPI0 (1<<14)
-#define S3C2443_PCLKCON_SPI1 (1<<15)
-
-#define S3C2443_SCLKCON_DDRCLK (1<<16)
-#define S3C2443_SCLKCON_SSMCCLK (1<<15)
-#define S3C2443_SCLKCON_HSSPICLK (1<<14)
-#define S3C2443_SCLKCON_HSMMCCLK_EXT (1<<13)
-#define S3C2443_SCLKCON_HSMMCCLK_EPLL (1<<12)
-#define S3C2443_SCLKCON_CAMCLK (1<<11)
-#define S3C2443_SCLKCON_DISPCLK (1<<10)
-#define S3C2443_SCLKCON_I2SCLK (1<<9)
-#define S3C2443_SCLKCON_UARTCLK (1<<8)
-#define S3C2443_SCLKCON_USBHOST (1<<1)
-
-#define S3C2443_PWRCFG_SLEEP (1<<15)
-
-#define S3C2443_PWRCFG_USBPHY (1 << 4)
-
-#define S3C2443_URSTCON_FUNCRST (1 << 2)
-#define S3C2443_URSTCON_PHYRST (1 << 0)
-
-#define S3C2443_PHYCTRL_CLKSEL (1 << 3)
-#define S3C2443_PHYCTRL_EXTCLK (1 << 2)
-#define S3C2443_PHYCTRL_PLLSEL (1 << 1)
-#define S3C2443_PHYCTRL_DSPORT (1 << 0)
-
-#define S3C2443_PHYPWR_COMMON_ON (1 << 31)
-#define S3C2443_PHYPWR_ANALOG_PD (1 << 4)
-#define S3C2443_PHYPWR_PLL_REFCLK (1 << 3)
-#define S3C2443_PHYPWR_XO_ON (1 << 2)
-#define S3C2443_PHYPWR_PLL_PWRDN (1 << 1)
-#define S3C2443_PHYPWR_FSUSPEND (1 << 0)
-
-#define S3C2443_UCLKCON_DETECT_VBUS (1 << 31)
-#define S3C2443_UCLKCON_FUNC_CLKEN (1 << 2)
-#define S3C2443_UCLKCON_TCLKEN (1 << 0)
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
-{
- unsigned int mdiv, pdiv, sdiv;
- uint64_t fvco;
-
- mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
- pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
- sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
- mdiv &= S3C2443_PLLCON_MDIVMASK;
- pdiv &= S3C2443_PLLCON_PDIVMASK;
- sdiv &= S3C2443_PLLCON_SDIVMASK;
-
- fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
- do_div(fvco, pdiv << sdiv);
-
- return (unsigned int)fvco;
-}
-
-static inline unsigned int
-s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
-{
- unsigned int mdiv, pdiv, sdiv;
- uint64_t fvco;
-
- mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
- pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
- sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
- mdiv &= S3C2443_PLLCON_MDIVMASK;
- pdiv &= S3C2443_PLLCON_PDIVMASK;
- sdiv &= S3C2443_PLLCON_SDIVMASK;
-
- fvco = (uint64_t)baseclk * (mdiv + 8);
- do_div(fvco, (pdiv + 2) << sdiv);
-
- return (unsigned int)fvco;
-}
-
-static inline void s3c_hsudc_init_phy(void)
-{
- u32 cfg;
-
- cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
- writel(cfg, S3C2443_PWRCFG);
-
- cfg = readl(S3C2443_URSTCON);
- cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
- writel(cfg, S3C2443_URSTCON);
- mdelay(1);
-
- cfg = readl(S3C2443_URSTCON);
- cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
- writel(cfg, S3C2443_URSTCON);
-
- cfg = readl(S3C2443_PHYCTRL);
- cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
- cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
- writel(cfg, S3C2443_PHYCTRL);
-
- cfg = readl(S3C2443_PHYPWR);
- cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
- S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
- S3C2443_PHYPWR_ANALOG_PD);
- cfg |= S3C2443_PHYPWR_COMMON_ON;
- writel(cfg, S3C2443_PHYPWR);
-
- cfg = readl(S3C2443_UCLKCON);
- cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
- S3C2443_UCLKCON_TCLKEN);
- writel(cfg, S3C2443_UCLKCON);
-}
-
-static inline void s3c_hsudc_uninit_phy(void)
-{
- u32 cfg;
-
- cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
- writel(cfg, S3C2443_PWRCFG);
-
- writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
-
- cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
- writel(cfg, S3C2443_UCLKCON);
-}
-
-#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */
-
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
- *
- * Samsung RTC Controller core functions
- */
-
-#ifndef __RTC_CORE_H
-#define __RTC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-extern struct platform_device s3c_device_rtc;
-
-/* re-define device name depending on support. */
-static inline void s3c_rtc_setname(char *name)
-{
- s3c_device_rtc.name = name;
-}
-
-#endif /* __RTC_CORE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- */
-
-#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H
-#define __ARCH_ARM_MACH_S3C24XX_S3C2412_H __FILE__
-
-#include <plat/map-s3c.h>
-
-#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
-
-#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
-#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
-
-#define S3C2412_REFRESH S3C2412_MEMREG(0x10)
-
-#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x4)
-
-#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x0)
-
-#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2009 Simtec Electronics
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>
-//
-// S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/seq_file.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-
-#include "regs-mem.h"
-
-#define print_ns(x) ((x) / 10), ((x) % 10)
-
-/**
- * s3c2410_print_timing - print bank timing data for debug purposes
- * @pfx: The prefix to put on the output
- * @timings: The timing inforamtion to print.
-*/
-static void s3c2410_print_timing(const char *pfx,
- struct s3c_iotimings *timings)
-{
- struct s3c2410_iobank_timing *bt;
- int bank;
-
- for (bank = 0; bank < MAX_BANKS; bank++) {
- bt = timings->bank[bank].io_2410;
- if (!bt)
- continue;
-
- printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
- "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
- print_ns(bt->tacs),
- print_ns(bt->tcos),
- print_ns(bt->tacc),
- print_ns(bt->tcoh),
- print_ns(bt->tcah));
- }
-}
-
-/**
- * bank_reg - convert bank number to pointer to the control register.
- * @bank: The IO bank number.
- */
-static inline void __iomem *bank_reg(unsigned int bank)
-{
- return S3C2410_BANKCON0 + (bank << 2);
-}
-
-/**
- * bank_is_io - test whether bank is used for IO
- * @bankcon: The bank control register.
- *
- * This is a simplistic test to see if any BANKCON[x] is not an IO
- * bank. It currently does not take into account whether BWSCON has
- * an illegal width-setting in it, or if the pin connected to nCS[x]
- * is actually being handled as a chip-select.
- */
-static inline int bank_is_io(unsigned long bankcon)
-{
- return !(bankcon & S3C2410_BANKCON_SDRAM);
-}
-
-/**
- * to_div - convert cycle time to divisor
- * @cyc: The cycle time, in 10ths of nanoseconds.
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- *
- * Convert the given cycle time into the divisor to use to obtain it from
- * HCLK.
-*/
-static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
-{
- if (cyc == 0)
- return 0;
-
- return DIV_ROUND_UP(cyc, hclk_tns);
-}
-
-/**
- * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
- * @cyc: The cycle time, in 10ths of nanoseconds.
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @v: Pointer to register to alter.
- * @shift: The shift to get to the control bits.
- *
- * Calculate the divisor, and turn it into the correct control bits to
- * set in the result, @v.
- */
-static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
- unsigned long *v, int shift)
-{
- unsigned int div = to_div(cyc, hclk_tns);
- unsigned long val;
-
- s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
- __func__, cyc, hclk_tns, shift, div);
-
- switch (div) {
- case 0:
- val = 0;
- break;
- case 1:
- val = 1;
- break;
- case 2:
- val = 2;
- break;
- case 3:
- case 4:
- val = 3;
- break;
- default:
- return -1;
- }
-
- *v |= val << shift;
- return 0;
-}
-
-static int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
-{
- /* Currently no support for Tacp calculations. */
- return 0;
-}
-
-/**
- * calc_tacc - calculate divisor control for tacc.
- * @cyc: The cycle time, in 10ths of nanoseconds.
- * @nwait_en: IS nWAIT enabled for this bank.
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @v: Pointer to register to alter.
- *
- * Calculate the divisor control for tACC, taking into account whether
- * the bank has nWAIT enabled. The result is used to modify the value
- * pointed to by @v.
-*/
-static int calc_tacc(unsigned int cyc, int nwait_en,
- unsigned long hclk_tns, unsigned long *v)
-{
- unsigned int div = to_div(cyc, hclk_tns);
- unsigned long val;
-
- s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
- __func__, cyc, nwait_en, hclk_tns, div);
-
- /* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
- if (nwait_en && div < 4)
- div = 4;
-
- switch (div) {
- case 0:
- val = 0;
- break;
-
- case 1:
- case 2:
- case 3:
- case 4:
- val = div - 1;
- break;
-
- case 5:
- case 6:
- val = 4;
- break;
-
- case 7:
- case 8:
- val = 5;
- break;
-
- case 9:
- case 10:
- val = 6;
- break;
-
- case 11:
- case 12:
- case 13:
- case 14:
- val = 7;
- break;
-
- default:
- return -1;
- }
-
- *v |= val << 8;
- return 0;
-}
-
-/**
- * s3c2410_calc_bank - calculate bank timing information
- * @cfg: The configuration we need to calculate for.
- * @bt: The bank timing information.
- *
- * Given the cycle timine for a bank @bt, calculate the new BANKCON
- * setting for the @cfg timing. This updates the timing information
- * ready for the cpu frequency change.
- */
-static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
- struct s3c2410_iobank_timing *bt)
-{
- unsigned long hclk = cfg->freq.hclk_tns;
- unsigned long res;
- int ret;
-
- res = bt->bankcon;
- res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
-
- /* tacp: 2,3,4,5 */
- /* tcah: 0,1,2,4 */
- /* tcoh: 0,1,2,4 */
- /* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
- /* tcos: 0,1,2,4 */
- /* tacs: 0,1,2,4 */
-
- ret = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
- ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
- ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
- ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
-
- if (ret)
- return -EINVAL;
-
- ret |= calc_tacp(bt->tacp, hclk, &res);
- ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
-
- if (ret)
- return -EINVAL;
-
- bt->bankcon = res;
- return 0;
-}
-
-static const unsigned int tacc_tab[] = {
- [0] = 1,
- [1] = 2,
- [2] = 3,
- [3] = 4,
- [4] = 6,
- [5] = 9,
- [6] = 10,
- [7] = 14,
-};
-
-/**
- * get_tacc - turn tACC value into cycle time
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @val: The bank timing register value, shifed down.
- */
-static unsigned int get_tacc(unsigned long hclk_tns,
- unsigned long val)
-{
- val &= 7;
- return hclk_tns * tacc_tab[val];
-}
-
-/**
- * get_0124 - turn 0/1/2/4 divider into cycle time
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @val: The bank timing register value, shifed down.
- */
-static unsigned int get_0124(unsigned long hclk_tns,
- unsigned long val)
-{
- val &= 3;
- return hclk_tns * ((val == 3) ? 4 : val);
-}
-
-/**
- * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
- * @cfg: The frequency configuration
- * @bt: The bank timing to fill in (uses cached BANKCON)
- *
- * Given the BANKCON setting in @bt and the current frequency settings
- * in @cfg, update the cycle timing information.
- */
-static void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
- struct s3c2410_iobank_timing *bt)
-{
- unsigned long bankcon = bt->bankcon;
- unsigned long hclk = cfg->freq.hclk_tns;
-
- bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
- bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
- bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
- bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
- bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
-}
-
-/**
- * s3c2410_iotiming_debugfs - debugfs show io bank timing information
- * @seq: The seq_file to write output to using seq_printf().
- * @cfg: The current configuration.
- * @iob: The IO bank information to decode.
- */
-void s3c2410_iotiming_debugfs(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob)
-{
- struct s3c2410_iobank_timing *bt = iob->io_2410;
- unsigned long bankcon = bt->bankcon;
- unsigned long hclk = cfg->freq.hclk_tns;
- unsigned int tacs;
- unsigned int tcos;
- unsigned int tacc;
- unsigned int tcoh;
- unsigned int tcah;
-
- seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
-
- tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
- tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
- tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
- tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
- tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
-
- seq_printf(seq,
- "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
- print_ns(bt->tacs),
- print_ns(bt->tcos),
- print_ns(bt->tacc),
- print_ns(bt->tcoh),
- print_ns(bt->tcah));
-
- seq_printf(seq,
- "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
- print_ns(tacs),
- print_ns(tcos),
- print_ns(tacc),
- print_ns(tcoh),
- print_ns(tcah));
-}
-
-/**
- * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
- * @cfg: The frequency configuration
- * @iot: The IO timing information to fill out.
- *
- * Calculate the new values for the banks in @iot based on the new
- * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
- * to update the timing when necessary.
- */
-int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *iot)
-{
- struct s3c2410_iobank_timing *bt;
- unsigned long bankcon;
- int bank;
- int ret;
-
- for (bank = 0; bank < MAX_BANKS; bank++) {
- bankcon = __raw_readl(bank_reg(bank));
- bt = iot->bank[bank].io_2410;
-
- if (!bt)
- continue;
-
- bt->bankcon = bankcon;
-
- ret = s3c2410_calc_bank(cfg, bt);
- if (ret) {
- printk(KERN_ERR "%s: cannot calculate bank %d io\n",
- __func__, bank);
- goto err;
- }
-
- s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
- __func__, bank, bt->bankcon);
- }
-
- return 0;
- err:
- return ret;
-}
-
-/**
- * s3c2410_iotiming_set - set the IO timings from the given setup.
- * @cfg: The frequency configuration
- * @iot: The IO timing information to use.
- *
- * Set all the currently used IO bank timing information generated
- * by s3c2410_iotiming_calc() once the core has validated that all
- * the new values are within permitted bounds.
- */
-void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *iot)
-{
- struct s3c2410_iobank_timing *bt;
- int bank;
-
- /* set the io timings from the specifier */
-
- for (bank = 0; bank < MAX_BANKS; bank++) {
- bt = iot->bank[bank].io_2410;
- if (!bt)
- continue;
-
- __raw_writel(bt->bankcon, bank_reg(bank));
- }
-}
-
-/**
- * s3c2410_iotiming_get - Get the timing information from current registers.
- * @cfg: The frequency configuration
- * @timings: The IO timing information to fill out.
- *
- * Calculate the @timings timing information from the current frequency
- * information in @cfg, and the new frequency configuration
- * through all the IO banks, reading the state and then updating @iot
- * as necessary.
- *
- * This is used at the moment on initialisation to get the current
- * configuration so that boards do not have to carry their own setup
- * if the timings are correct on initialisation.
- */
-
-int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings)
-{
- struct s3c2410_iobank_timing *bt;
- unsigned long bankcon;
- unsigned long bwscon;
- int bank;
-
- bwscon = __raw_readl(S3C2410_BWSCON);
-
- /* look through all banks to see what is currently set. */
-
- for (bank = 0; bank < MAX_BANKS; bank++) {
- bankcon = __raw_readl(bank_reg(bank));
-
- if (!bank_is_io(bankcon))
- continue;
-
- s3c_freq_iodbg("%s: bank %d: con %08lx\n",
- __func__, bank, bankcon);
-
- bt = kzalloc(sizeof(*bt), GFP_KERNEL);
- if (!bt)
- return -ENOMEM;
-
- /* find out in nWait is enabled for bank. */
-
- if (bank != 0) {
- unsigned long tmp = S3C2410_BWSCON_GET(bwscon, bank);
- if (tmp & S3C2410_BWSCON_WS)
- bt->nwait_en = 1;
- }
-
- timings->bank[bank].io_2410 = bt;
- bt->bankcon = bankcon;
-
- s3c2410_iotiming_getbank(cfg, bt);
- }
-
- s3c2410_print_timing("get", timings);
- return 0;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2008 Simtec Electronics
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>
-//
-// S3C2412/S3C2443 (PL093 based) IO timing support
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/seq_file.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include <linux/amba/pl093.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/cpu.h>
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-
-#include <mach/s3c2412.h>
-
-#define print_ns(x) ((x) / 10), ((x) % 10)
-
-/**
- * s3c2412_print_timing - print timing information via printk.
- * @pfx: The prefix to print each line with.
- * @iot: The IO timing information
- */
-static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
-{
- struct s3c2412_iobank_timing *bt;
- unsigned int bank;
-
- for (bank = 0; bank < MAX_BANKS; bank++) {
- bt = iot->bank[bank].io_2412;
- if (!bt)
- continue;
-
- printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
- "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
- print_ns(bt->idcy),
- print_ns(bt->wstrd),
- print_ns(bt->wstwr),
- print_ns(bt->wstoen),
- print_ns(bt->wstwen),
- print_ns(bt->wstbrd));
- }
-}
-
-/**
- * to_div - turn a cycle length into a divisor setting.
- * @cyc_tns: The cycle time in 10ths of nanoseconds.
- * @clk_tns: The clock period in 10ths of nanoseconds.
- */
-static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
-{
- return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
-}
-
-/**
- * calc_timing - calculate timing divisor value and check in range.
- * @hwtm: The hardware timing in 10ths of nanoseconds.
- * @clk_tns: The clock period in 10ths of nanoseconds.
- * @err: Pointer to err variable to update in event of failure.
- */
-static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
- unsigned int *err)
-{
- unsigned int ret = to_div(hwtm, clk_tns);
-
- if (ret > 0xf)
- *err = -EINVAL;
-
- return ret;
-}
-
-/**
- * s3c2412_calc_bank - calculate the bank divisor settings.
- * @cfg: The current frequency configuration.
- * @bt: The bank timing.
- */
-static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
- struct s3c2412_iobank_timing *bt)
-{
- unsigned int hclk = cfg->freq.hclk_tns;
- int err = 0;
-
- bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
- bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
- bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
- bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
- bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
- bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
-
- return err;
-}
-
-/**
- * s3c2412_iotiming_debugfs - debugfs show io bank timing information
- * @seq: The seq_file to write output to using seq_printf().
- * @cfg: The current configuration.
- * @iob: The IO bank information to decode.
-*/
-void s3c2412_iotiming_debugfs(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob)
-{
- struct s3c2412_iobank_timing *bt = iob->io_2412;
-
- seq_printf(seq,
- "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
- "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
- print_ns(bt->idcy),
- print_ns(bt->wstrd),
- print_ns(bt->wstwr),
- print_ns(bt->wstoen),
- print_ns(bt->wstwen),
- print_ns(bt->wstbrd));
-}
-
-/**
- * s3c2412_iotiming_calc - calculate all the bank divisor settings.
- * @cfg: The current frequency configuration.
- * @iot: The bank timing information.
- *
- * Calculate the timing information for all the banks that are
- * configured as IO, using s3c2412_calc_bank().
- */
-int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *iot)
-{
- struct s3c2412_iobank_timing *bt;
- int bank;
- int ret;
-
- for (bank = 0; bank < MAX_BANKS; bank++) {
- bt = iot->bank[bank].io_2412;
- if (!bt)
- continue;
-
- ret = s3c2412_calc_bank(cfg, bt);
- if (ret) {
- printk(KERN_ERR "%s: cannot calculate bank %d io\n",
- __func__, bank);
- goto err;
- }
- }
-
- return 0;
- err:
- return ret;
-}
-
-/**
- * s3c2412_iotiming_set - set the timing information
- * @cfg: The current frequency configuration.
- * @iot: The bank timing information.
- *
- * Set the IO bank information from the details calculated earlier from
- * calling s3c2412_iotiming_calc().
- */
-void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *iot)
-{
- struct s3c2412_iobank_timing *bt;
- void __iomem *regs;
- int bank;
-
- /* set the io timings from the specifier */
-
- for (bank = 0; bank < MAX_BANKS; bank++) {
- bt = iot->bank[bank].io_2412;
- if (!bt)
- continue;
-
- regs = S3C2412_SSMC_BANK(bank);
-
- __raw_writel(bt->smbidcyr, regs + SMBIDCYR);
- __raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
- __raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
- __raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
- __raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
- __raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
- }
-}
-
-static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
-{
- return (reg & 0xf) * clock;
-}
-
-static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
- struct s3c2412_iobank_timing *bt,
- unsigned int bank)
-{
- unsigned long clk = cfg->freq.hclk_tns; /* ssmc clock??? */
- void __iomem *regs = S3C2412_SSMC_BANK(bank);
-
- bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
- bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
- bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
- bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
- bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
-}
-
-/**
- * bank_is_io - return true if bank is (possibly) IO.
- * @bank: The bank number.
- * @bankcfg: The value of S3C2412_EBI_BANKCFG.
- */
-static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
-{
- if (bank < 2)
- return true;
-
- return !(bankcfg & (1 << bank));
-}
-
-int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings)
-{
- struct s3c2412_iobank_timing *bt;
- u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
- unsigned int bank;
-
- /* look through all banks to see what is currently set. */
-
- for (bank = 0; bank < MAX_BANKS; bank++) {
- if (!bank_is_io(bank, bankcfg))
- continue;
-
- bt = kzalloc(sizeof(*bt), GFP_KERNEL);
- if (!bt)
- return -ENOMEM;
-
- timings->bank[bank].io_2412 = bt;
- s3c2412_iotiming_getbank(cfg, bt, bank);
- }
-
- s3c2412_print_timing("get", timings);
- return 0;
-}
-
-/* this is in here as it is so small, it doesn't currently warrant a file
- * to itself. We expect that any s3c24xx needing this is going to also
- * need the iotiming support.
- */
-void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
- struct s3c_cpufreq_board *board = cfg->board;
- u32 refresh;
-
- WARN_ON(board == NULL);
-
- /* Reduce both the refresh time (in ns) and the frequency (in MHz)
- * down to ensure that we do not overflow 32 bit numbers.
- *
- * This should work for HCLK up to 133MHz and refresh period up
- * to 30usec.
- */
-
- refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
- refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
- refresh &= ((1 << 16) - 1);
-
- s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
-
- __raw_writel(refresh, S3C2412_REFRESH);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2004 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// S3C24XX - IRQ PM code
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/map-base.h>
-#include <plat/map-s3c.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/pm-core.h>
-
-#include <asm/irq.h>
-
-int s3c_irq_wake(struct irq_data *data, unsigned int state)
-{
- unsigned long irqbit = 1 << data->hwirq;
-
- if (!(s3c_irqwake_intallow & irqbit))
- return -ENOENT;
-
- pr_info("wake %s for hwirq %lu\n",
- state ? "enabled" : "disabled", data->hwirq);
-
- if (!state)
- s3c_irqwake_intmask |= irqbit;
- else
- s3c_irqwake_intmask &= ~irqbit;
-
- return 0;
-}
-
-static struct sleep_save irq_save[] = {
- SAVE_ITEM(S3C2410_INTMSK),
- SAVE_ITEM(S3C2410_INTSUBMSK),
-};
-
-/* the extint values move between the s3c2410/s3c2440 and the s3c2412
- * so we use an array to hold them, and to calculate the address of
- * the register at run-time
-*/
-
-static unsigned long save_extint[3];
-static unsigned long save_eintflt[4];
-static unsigned long save_eintmask;
-
-static int s3c24xx_irq_suspend(void)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(save_extint); i++)
- save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
-
- for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
- save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
-
- s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
- save_eintmask = __raw_readl(S3C24XX_EINTMASK);
-
- return 0;
-}
-
-static void s3c24xx_irq_resume(void)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(save_extint); i++)
- __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
-
- for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
- __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
-
- s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
- __raw_writel(save_eintmask, S3C24XX_EINTMASK);
-}
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
-};
-
-#ifdef CONFIG_CPU_S3C2416
-static struct sleep_save s3c2416_irq_save[] = {
- SAVE_ITEM(S3C2416_INTMSK2),
-};
-
-static int s3c2416_irq_suspend(void)
-{
- s3c_pm_do_save(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
-
- return 0;
-}
-
-static void s3c2416_irq_resume(void)
-{
- s3c_pm_do_restore(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
-}
-
-struct syscore_ops s3c2416_irq_syscore_ops = {
- .suspend = s3c2416_irq_suspend,
- .resume = s3c2416_irq_resume,
-};
-#endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/stddef.h>
-#include <linux/export.h>
-#include <linux/spi/s3c24xx-fiq.h>
-
-EXPORT_SYMBOL(s3c24xx_spi_fiq_rx);
-EXPORT_SYMBOL(s3c24xx_spi_fiq_txrx);
-EXPORT_SYMBOL(s3c24xx_spi_fiq_tx);
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* linux/drivers/spi/spi_s3c24xx_fiq.S
- *
- * Copyright 2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - FIQ pseudo-DMA transfer code
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-#include <mach/map.h>
-#include <mach/regs-irq.h>
-
-#include <linux/spi/s3c24xx-fiq.h>
-
-#define S3C2410_SPTDAT (0x10)
-#define S3C2410_SPRDAT (0x14)
-
- .text
-
- @ entry to these routines is as follows, with the register names
- @ defined in fiq.h so that they can be shared with the C files which
- @ setup the calling registers.
- @
- @ fiq_rirq The base of the IRQ registers to find S3C2410_SRCPND
- @ fiq_rtmp Temporary register to hold tx/rx data
- @ fiq_rspi The base of the SPI register block
- @ fiq_rtx The tx buffer pointer
- @ fiq_rrx The rx buffer pointer
- @ fiq_rcount The number of bytes to move
-
- @ each entry starts with a word entry of how long it is
- @ and an offset to the irq acknowledgment word
-
-ENTRY(s3c24xx_spi_fiq_rx)
-s3c24xx_spi_fix_rx:
- .word fiq_rx_end - fiq_rx_start
- .word fiq_rx_irq_ack - fiq_rx_start
-fiq_rx_start:
- ldr fiq_rtmp, fiq_rx_irq_ack
- str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
- ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ]
- strb fiq_rtmp, [ fiq_rrx ], #1
-
- mov fiq_rtmp, #0xff
- strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
- subs fiq_rcount, fiq_rcount, #1
- subnes pc, lr, #4 @@ return, still have work to do
-
- @@ set IRQ controller so that next op will trigger IRQ
- mov fiq_rtmp, #0
- str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ]
- subs pc, lr, #4
-
-fiq_rx_irq_ack:
- .word 0
-fiq_rx_end:
-
-ENTRY(s3c24xx_spi_fiq_txrx)
-s3c24xx_spi_fiq_txrx:
- .word fiq_txrx_end - fiq_txrx_start
- .word fiq_txrx_irq_ack - fiq_txrx_start
-fiq_txrx_start:
-
- ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ]
- strb fiq_rtmp, [ fiq_rrx ], #1
-
- ldr fiq_rtmp, fiq_txrx_irq_ack
- str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
- ldrb fiq_rtmp, [ fiq_rtx ], #1
- strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
- subs fiq_rcount, fiq_rcount, #1
- subnes pc, lr, #4 @@ return, still have work to do
-
- mov fiq_rtmp, #0
- str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ]
- subs pc, lr, #4
-
-fiq_txrx_irq_ack:
- .word 0
-
-fiq_txrx_end:
-
-ENTRY(s3c24xx_spi_fiq_tx)
-s3c24xx_spi_fix_tx:
- .word fiq_tx_end - fiq_tx_start
- .word fiq_tx_irq_ack - fiq_tx_start
-fiq_tx_start:
- ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ]
-
- ldr fiq_rtmp, fiq_tx_irq_ack
- str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
- ldrb fiq_rtmp, [ fiq_rtx ], #1
- strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
- subs fiq_rcount, fiq_rcount, #1
- subnes pc, lr, #4 @@ return, still have work to do
-
- mov fiq_rtmp, #0
- str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ]
- subs pc, lr, #4
-
-fiq_tx_irq_ack:
- .word 0
-
-fiq_tx_end:
-
- .end
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * S3C24XX IRQ handling
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
-*/
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/irqdomain.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-
-#include <asm/exception.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-irqtype.h>
-#include <plat/pm.h>
-
-#define S3C_IRQTYPE_NONE 0
-#define S3C_IRQTYPE_EINT 1
-#define S3C_IRQTYPE_EDGE 2
-#define S3C_IRQTYPE_LEVEL 3
-
-struct s3c_irq_data {
- unsigned int type;
- unsigned long offset;
- unsigned long parent_irq;
-
- /* data gets filled during init */
- struct s3c_irq_intc *intc;
- unsigned long sub_bits;
- struct s3c_irq_intc *sub_intc;
-};
-
-/*
- * Structure holding the controller data
- * @reg_pending register holding pending irqs
- * @reg_intpnd special register intpnd in main intc
- * @reg_mask mask register
- * @domain irq_domain of the controller
- * @parent parent controller for ext and sub irqs
- * @irqs irq-data, always s3c_irq_data[32]
- */
-struct s3c_irq_intc {
- void __iomem *reg_pending;
- void __iomem *reg_intpnd;
- void __iomem *reg_mask;
- struct irq_domain *domain;
- struct s3c_irq_intc *parent;
- struct s3c_irq_data *irqs;
-};
-
-/*
- * Array holding pointers to the global controller structs
- * [0] ... main_intc
- * [1] ... sub_intc
- * [2] ... main_intc2 on s3c2416
- */
-static struct s3c_irq_intc *s3c_intc[3];
-
-static void s3c_irq_mask(struct irq_data *data)
-{
- struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
- struct s3c_irq_intc *intc = irq_data->intc;
- struct s3c_irq_intc *parent_intc = intc->parent;
- struct s3c_irq_data *parent_data;
- unsigned long mask;
- unsigned int irqno;
-
- mask = readl_relaxed(intc->reg_mask);
- mask |= (1UL << irq_data->offset);
- writel_relaxed(mask, intc->reg_mask);
-
- if (parent_intc) {
- parent_data = &parent_intc->irqs[irq_data->parent_irq];
-
- /* check to see if we need to mask the parent IRQ
- * The parent_irq is always in main_intc, so the hwirq
- * for find_mapping does not need an offset in any case.
- */
- if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
- irqno = irq_find_mapping(parent_intc->domain,
- irq_data->parent_irq);
- s3c_irq_mask(irq_get_irq_data(irqno));
- }
- }
-}
-
-static void s3c_irq_unmask(struct irq_data *data)
-{
- struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
- struct s3c_irq_intc *intc = irq_data->intc;
- struct s3c_irq_intc *parent_intc = intc->parent;
- unsigned long mask;
- unsigned int irqno;
-
- mask = readl_relaxed(intc->reg_mask);
- mask &= ~(1UL << irq_data->offset);
- writel_relaxed(mask, intc->reg_mask);
-
- if (parent_intc) {
- irqno = irq_find_mapping(parent_intc->domain,
- irq_data->parent_irq);
- s3c_irq_unmask(irq_get_irq_data(irqno));
- }
-}
-
-static inline void s3c_irq_ack(struct irq_data *data)
-{
- struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
- struct s3c_irq_intc *intc = irq_data->intc;
- unsigned long bitval = 1UL << irq_data->offset;
-
- writel_relaxed(bitval, intc->reg_pending);
- if (intc->reg_intpnd)
- writel_relaxed(bitval, intc->reg_intpnd);
-}
-
-static int s3c_irq_type(struct irq_data *data, unsigned int type)
-{
- switch (type) {
- case IRQ_TYPE_NONE:
- break;
- case IRQ_TYPE_EDGE_RISING:
- case IRQ_TYPE_EDGE_FALLING:
- case IRQ_TYPE_EDGE_BOTH:
- irq_set_handler(data->irq, handle_edge_irq);
- break;
- case IRQ_TYPE_LEVEL_LOW:
- case IRQ_TYPE_LEVEL_HIGH:
- irq_set_handler(data->irq, handle_level_irq);
- break;
- default:
- pr_err("No such irq type %d\n", type);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int s3c_irqext_type_set(void __iomem *gpcon_reg,
- void __iomem *extint_reg,
- unsigned long gpcon_offset,
- unsigned long extint_offset,
- unsigned int type)
-{
- unsigned long newvalue = 0, value;
-
- /* Set the GPIO to external interrupt mode */
- value = readl_relaxed(gpcon_reg);
- value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
- writel_relaxed(value, gpcon_reg);
-
- /* Set the external interrupt to pointed trigger type */
- switch (type)
- {
- case IRQ_TYPE_NONE:
- pr_warn("No edge setting!\n");
- break;
-
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S3C2410_EXTINT_RISEEDGE;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S3C2410_EXTINT_FALLEDGE;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S3C2410_EXTINT_BOTHEDGE;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S3C2410_EXTINT_LOWLEV;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S3C2410_EXTINT_HILEV;
- break;
-
- default:
- pr_err("No such irq type %d\n", type);
- return -EINVAL;
- }
-
- value = readl_relaxed(extint_reg);
- value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
- writel_relaxed(value, extint_reg);
-
- return 0;
-}
-
-static int s3c_irqext_type(struct irq_data *data, unsigned int type)
-{
- void __iomem *extint_reg;
- void __iomem *gpcon_reg;
- unsigned long gpcon_offset, extint_offset;
-
- if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
- gpcon_reg = S3C2410_GPFCON;
- extint_reg = S3C24XX_EXTINT0;
- gpcon_offset = (data->hwirq) * 2;
- extint_offset = (data->hwirq) * 4;
- } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
- gpcon_reg = S3C2410_GPGCON;
- extint_reg = S3C24XX_EXTINT1;
- gpcon_offset = (data->hwirq - 8) * 2;
- extint_offset = (data->hwirq - 8) * 4;
- } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
- gpcon_reg = S3C2410_GPGCON;
- extint_reg = S3C24XX_EXTINT2;
- gpcon_offset = (data->hwirq - 8) * 2;
- extint_offset = (data->hwirq - 16) * 4;
- } else {
- return -EINVAL;
- }
-
- return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
- extint_offset, type);
-}
-
-static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
-{
- void __iomem *extint_reg;
- void __iomem *gpcon_reg;
- unsigned long gpcon_offset, extint_offset;
-
- if (data->hwirq <= 3) {
- gpcon_reg = S3C2410_GPFCON;
- extint_reg = S3C24XX_EXTINT0;
- gpcon_offset = (data->hwirq) * 2;
- extint_offset = (data->hwirq) * 4;
- } else {
- return -EINVAL;
- }
-
- return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
- extint_offset, type);
-}
-
-static struct irq_chip s3c_irq_chip = {
- .name = "s3c",
- .irq_ack = s3c_irq_ack,
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_set_type = s3c_irq_type,
- .irq_set_wake = s3c_irq_wake
-};
-
-static struct irq_chip s3c_irq_level_chip = {
- .name = "s3c-level",
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_ack = s3c_irq_ack,
- .irq_set_type = s3c_irq_type,
-};
-
-static struct irq_chip s3c_irqext_chip = {
- .name = "s3c-ext",
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_ack = s3c_irq_ack,
- .irq_set_type = s3c_irqext_type,
- .irq_set_wake = s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
- .name = "s3c-ext0",
- .irq_ack = s3c_irq_ack,
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_set_wake = s3c_irq_wake,
- .irq_set_type = s3c_irqext0_type,
-};
-
-static void s3c_irq_demux(struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc);
- struct s3c_irq_intc *intc = irq_data->intc;
- struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
- unsigned int n, offset, irq;
- unsigned long src, msk;
-
- /* we're using individual domains for the non-dt case
- * and one big domain for the dt case where the subintc
- * starts at hwirq number 32.
- */
- offset = irq_domain_get_of_node(intc->domain) ? 32 : 0;
-
- chained_irq_enter(chip, desc);
-
- src = readl_relaxed(sub_intc->reg_pending);
- msk = readl_relaxed(sub_intc->reg_mask);
-
- src &= ~msk;
- src &= irq_data->sub_bits;
-
- while (src) {
- n = __ffs(src);
- src &= ~(1 << n);
- irq = irq_find_mapping(sub_intc->domain, offset + n);
- generic_handle_irq(irq);
- }
-
- chained_irq_exit(chip, desc);
-}
-
-static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
- struct pt_regs *regs, int intc_offset)
-{
- int pnd;
- int offset;
-
- pnd = readl_relaxed(intc->reg_intpnd);
- if (!pnd)
- return false;
-
- /* non-dt machines use individual domains */
- if (!irq_domain_get_of_node(intc->domain))
- intc_offset = 0;
-
- /* We have a problem that the INTOFFSET register does not always
- * show one interrupt. Occasionally we get two interrupts through
- * the prioritiser, and this causes the INTOFFSET register to show
- * what looks like the logical-or of the two interrupt numbers.
- *
- * Thanks to Klaus, Shannon, et al for helping to debug this problem
- */
- offset = readl_relaxed(intc->reg_intpnd + 4);
-
- /* Find the bit manually, when the offset is wrong.
- * The pending register only ever contains the one bit of the next
- * interrupt to handle.
- */
- if (!(pnd & (1 << offset)))
- offset = __ffs(pnd);
-
- handle_domain_irq(intc->domain, intc_offset + offset, regs);
- return true;
-}
-
-asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
-{
- do {
- if (likely(s3c_intc[0]))
- if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
- continue;
-
- if (s3c_intc[2])
- if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
- continue;
-
- break;
- } while (1);
-}
-
-#ifdef CONFIG_FIQ
-/**
- * s3c24xx_set_fiq - set the FIQ routing
- * @irq: IRQ number to route to FIQ on processor.
- * @ack_ptr: pointer to a location for storing the bit mask
- * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
- *
- * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
- * @on is true, the @irq is checked to see if it can be routed and the
- * interrupt controller updated to route the IRQ. If @on is false, the FIQ
- * routing is cleared, regardless of which @irq is specified.
- *
- * returns the mask value for the register.
- */
-int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on)
-{
- u32 intmod;
- unsigned offs;
-
- if (on) {
- offs = irq - FIQ_START;
- if (offs > 31)
- return 0;
-
- intmod = 1 << offs;
- } else {
- intmod = 0;
- }
-
- if (ack_ptr)
- *ack_ptr = intmod;
- writel_relaxed(intmod, S3C2410_INTMOD);
-
- return intmod;
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
-#endif
-
-static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw)
-{
- struct s3c_irq_intc *intc = h->host_data;
- struct s3c_irq_data *irq_data = &intc->irqs[hw];
- struct s3c_irq_intc *parent_intc;
- struct s3c_irq_data *parent_irq_data;
- unsigned int irqno;
-
- /* attach controller pointer to irq_data */
- irq_data->intc = intc;
- irq_data->offset = hw;
-
- parent_intc = intc->parent;
-
- /* set handler and flags */
- switch (irq_data->type) {
- case S3C_IRQTYPE_NONE:
- return 0;
- case S3C_IRQTYPE_EINT:
- /* On the S3C2412, the EINT0to3 have a parent irq
- * but need the s3c_irq_eint0t4 chip
- */
- if (parent_intc && (!soc_is_s3c2412() || hw >= 4))
- irq_set_chip_and_handler(virq, &s3c_irqext_chip,
- handle_edge_irq);
- else
- irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
- handle_edge_irq);
- break;
- case S3C_IRQTYPE_EDGE:
- if (parent_intc || intc->reg_pending == S3C2416_SRCPND2)
- irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
- handle_edge_irq);
- else
- irq_set_chip_and_handler(virq, &s3c_irq_chip,
- handle_edge_irq);
- break;
- case S3C_IRQTYPE_LEVEL:
- if (parent_intc)
- irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
- handle_level_irq);
- else
- irq_set_chip_and_handler(virq, &s3c_irq_chip,
- handle_level_irq);
- break;
- default:
- pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
- return -EINVAL;
- }
-
- irq_set_chip_data(virq, irq_data);
-
- if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) {
- if (irq_data->parent_irq > 31) {
- pr_err("irq-s3c24xx: parent irq %lu is out of range\n",
- irq_data->parent_irq);
- return -EINVAL;
- }
-
- parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
- parent_irq_data->sub_intc = intc;
- parent_irq_data->sub_bits |= (1UL << hw);
-
- /* attach the demuxer to the parent irq */
- irqno = irq_find_mapping(parent_intc->domain,
- irq_data->parent_irq);
- if (!irqno) {
- pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
- irq_data->parent_irq);
- return -EINVAL;
- }
- irq_set_chained_handler(irqno, s3c_irq_demux);
- }
-
- return 0;
-}
-
-static const struct irq_domain_ops s3c24xx_irq_ops = {
- .map = s3c24xx_irq_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
-{
- void __iomem *reg_source;
- unsigned long pend;
- unsigned long last;
- int i;
-
- /* if intpnd is set, read the next pending irq from there */
- reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = readl_relaxed(reg_source);
-
- if (pend == 0 || pend == last)
- break;
-
- writel_relaxed(pend, intc->reg_pending);
- if (intc->reg_intpnd)
- writel_relaxed(pend, intc->reg_intpnd);
-
- pr_info("irq: clearing pending status %08x\n", (int)pend);
- last = pend;
- }
-}
-
-static struct s3c_irq_intc * __init s3c24xx_init_intc(struct device_node *np,
- struct s3c_irq_data *irq_data,
- struct s3c_irq_intc *parent,
- unsigned long address)
-{
- struct s3c_irq_intc *intc;
- void __iomem *base = (void *)0xf6000000; /* static mapping */
- int irq_num;
- int irq_start;
- int ret;
-
- intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
- if (!intc)
- return ERR_PTR(-ENOMEM);
-
- intc->irqs = irq_data;
-
- if (parent)
- intc->parent = parent;
-
- /* select the correct data for the controller.
- * Need to hard code the irq num start and offset
- * to preserve the static mapping for now
- */
- switch (address) {
- case 0x4a000000:
- pr_debug("irq: found main intc\n");
- intc->reg_pending = base;
- intc->reg_mask = base + 0x08;
- intc->reg_intpnd = base + 0x10;
- irq_num = 32;
- irq_start = S3C2410_IRQ(0);
- break;
- case 0x4a000018:
- pr_debug("irq: found subintc\n");
- intc->reg_pending = base + 0x18;
- intc->reg_mask = base + 0x1c;
- irq_num = 29;
- irq_start = S3C2410_IRQSUB(0);
- break;
- case 0x4a000040:
- pr_debug("irq: found intc2\n");
- intc->reg_pending = base + 0x40;
- intc->reg_mask = base + 0x48;
- intc->reg_intpnd = base + 0x50;
- irq_num = 8;
- irq_start = S3C2416_IRQ(0);
- break;
- case 0x560000a4:
- pr_debug("irq: found eintc\n");
- base = (void *)0xfd000000;
-
- intc->reg_mask = base + 0xa4;
- intc->reg_pending = base + 0xa8;
- irq_num = 24;
- irq_start = S3C2410_IRQ(32);
- break;
- default:
- pr_err("irq: unsupported controller address\n");
- ret = -EINVAL;
- goto err;
- }
-
- /* now that all the data is complete, init the irq-domain */
- s3c24xx_clear_intc(intc);
- intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
- 0, &s3c24xx_irq_ops,
- intc);
- if (!intc->domain) {
- pr_err("irq: could not create irq-domain\n");
- ret = -EINVAL;
- goto err;
- }
-
- set_handle_irq(s3c24xx_handle_irq);
-
- return intc;
-
-err:
- kfree(intc);
- return ERR_PTR(ret);
-}
-
-static struct s3c_irq_data __maybe_unused init_eint[32] = {
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
-};
-
-#ifdef CONFIG_CPU_S3C2410
-static struct s3c_irq_data init_s3c2410base[32] = {
- { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
- { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
- { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2410subint[32] = {
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-};
-
-void __init s3c2410_init_irq(void)
-{
-#ifdef CONFIG_FIQ
- init_FIQ(FIQ_START);
-#endif
-
- s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL,
- 0x4a000000);
- if (IS_ERR(s3c_intc[0])) {
- pr_err("irq: could not create main interrupt controller\n");
- return;
- }
-
- s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0],
- s3c_intc[0], 0x4a000018);
- s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-static struct s3c_irq_data init_s3c2412base[32] = {
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
- { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
- { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2412eint[32] = {
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
- { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
-};
-
-static struct s3c_irq_data init_s3c2412subint[32] = {
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
- { .type = S3C_IRQTYPE_NONE, },
- { .type = S3C_IRQTYPE_NONE, },
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */
-};
-
-void __init s3c2412_init_irq(void)
-{
- pr_info("S3C2412: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
- init_FIQ(FIQ_START);
-#endif
-
- s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL,
- 0x4a000000);
- if (IS_ERR(s3c_intc[0])) {
- pr_err("irq: could not create main interrupt controller\n");
- return;
- }
-
- s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4);
- s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0],
- s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2416
-static struct s3c_irq_data init_s3c2416base[32] = {
- { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
- { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
- { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* NAND */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
- { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
- { .type = S3C_IRQTYPE_NONE, },
- { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2416subint[32] = {
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-static struct s3c_irq_data init_s3c2416_second[32] = {
- { .type = S3C_IRQTYPE_EDGE }, /* 2D */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
-};
-
-void __init s3c2416_init_irq(void)
-{
- pr_info("S3C2416: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
- init_FIQ(FIQ_START);
-#endif
-
- s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL,
- 0x4a000000);
- if (IS_ERR(s3c_intc[0])) {
- pr_err("irq: could not create main interrupt controller\n");
- return;
- }
-
- s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
- s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0],
- s3c_intc[0], 0x4a000018);
-
- s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0],
- NULL, 0x4a000040);
-}
-
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-static struct s3c_irq_data init_s3c2440base[32] = {
- { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
- { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
- { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
- { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2440subint[32] = {
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-void __init s3c2440_init_irq(void)
-{
- pr_info("S3C2440: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
- init_FIQ(FIQ_START);
-#endif
-
- s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL,
- 0x4a000000);
- if (IS_ERR(s3c_intc[0])) {
- pr_err("irq: could not create main interrupt controller\n");
- return;
- }
-
- s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
- s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0],
- s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-static struct s3c_irq_data init_s3c2442base[32] = {
- { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
- { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
- { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
- { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2442subint[32] = {
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
-};
-
-void __init s3c2442_init_irq(void)
-{
- pr_info("S3C2442: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
- init_FIQ(FIQ_START);
-#endif
-
- s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL,
- 0x4a000000);
- if (IS_ERR(s3c_intc[0])) {
- pr_err("irq: could not create main interrupt controller\n");
- return;
- }
-
- s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
- s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0],
- s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-static struct s3c_irq_data init_s3c2443base[32] = {
- { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
- { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
- { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
- { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
- { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
- { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
- { .type = S3C_IRQTYPE_EDGE, }, /* CFON */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* NAND */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
- { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
- { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
- { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
- { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
- { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-
-static struct s3c_irq_data init_s3c2443subint[32] = {
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
- { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
- { .type = S3C_IRQTYPE_NONE }, /* reserved */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
- { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-void __init s3c2443_init_irq(void)
-{
- pr_info("S3C2443: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
- init_FIQ(FIQ_START);
-#endif
-
- s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL,
- 0x4a000000);
- if (IS_ERR(s3c_intc[0])) {
- pr_err("irq: could not create main interrupt controller\n");
- return;
- }
-
- s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
- s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0],
- s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_OF
-static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw)
-{
- unsigned int ctrl_num = hw / 32;
- unsigned int intc_hw = hw % 32;
- struct s3c_irq_intc *intc = s3c_intc[ctrl_num];
- struct s3c_irq_intc *parent_intc = intc->parent;
- struct s3c_irq_data *irq_data = &intc->irqs[intc_hw];
-
- /* attach controller pointer to irq_data */
- irq_data->intc = intc;
- irq_data->offset = intc_hw;
-
- if (!parent_intc)
- irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq);
- else
- irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
- handle_edge_irq);
-
- irq_set_chip_data(virq, irq_data);
-
- return 0;
-}
-
-/* Translate our of irq notation
- * format: <ctrl_num ctrl_irq parent_irq type>
- */
-static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_type)
-{
- struct s3c_irq_intc *intc;
- struct s3c_irq_intc *parent_intc;
- struct s3c_irq_data *irq_data;
- struct s3c_irq_data *parent_irq_data;
- int irqno;
-
- if (WARN_ON(intsize < 4))
- return -EINVAL;
-
- if (intspec[0] > 2 || !s3c_intc[intspec[0]]) {
- pr_err("controller number %d invalid\n", intspec[0]);
- return -EINVAL;
- }
- intc = s3c_intc[intspec[0]];
-
- *out_hwirq = intspec[0] * 32 + intspec[2];
- *out_type = intspec[3] & IRQ_TYPE_SENSE_MASK;
-
- parent_intc = intc->parent;
- if (parent_intc) {
- irq_data = &intc->irqs[intspec[2]];
- irq_data->parent_irq = intspec[1];
- parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
- parent_irq_data->sub_intc = intc;
- parent_irq_data->sub_bits |= (1UL << intspec[2]);
-
- /* parent_intc is always s3c_intc[0], so no offset */
- irqno = irq_create_mapping(parent_intc->domain, intspec[1]);
- if (irqno < 0) {
- pr_err("irq: could not map parent interrupt\n");
- return irqno;
- }
-
- irq_set_chained_handler(irqno, s3c_irq_demux);
- }
-
- return 0;
-}
-
-static const struct irq_domain_ops s3c24xx_irq_ops_of = {
- .map = s3c24xx_irq_map_of,
- .xlate = s3c24xx_irq_xlate_of,
-};
-
-struct s3c24xx_irq_of_ctrl {
- char *name;
- unsigned long offset;
- struct s3c_irq_intc **handle;
- struct s3c_irq_intc **parent;
- struct irq_domain_ops *ops;
-};
-
-static int __init s3c_init_intc_of(struct device_node *np,
- struct device_node *interrupt_parent,
- struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl)
-{
- struct s3c_irq_intc *intc;
- struct s3c24xx_irq_of_ctrl *ctrl;
- struct irq_domain *domain;
- void __iomem *reg_base;
- int i;
-
- reg_base = of_iomap(np, 0);
- if (!reg_base) {
- pr_err("irq-s3c24xx: could not map irq registers\n");
- return -EINVAL;
- }
-
- domain = irq_domain_add_linear(np, num_ctrl * 32,
- &s3c24xx_irq_ops_of, NULL);
- if (!domain) {
- pr_err("irq: could not create irq-domain\n");
- return -EINVAL;
- }
-
- for (i = 0; i < num_ctrl; i++) {
- ctrl = &s3c_ctrl[i];
-
- pr_debug("irq: found controller %s\n", ctrl->name);
-
- intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
- if (!intc)
- return -ENOMEM;
-
- intc->domain = domain;
- intc->irqs = kcalloc(32, sizeof(struct s3c_irq_data),
- GFP_KERNEL);
- if (!intc->irqs) {
- kfree(intc);
- return -ENOMEM;
- }
-
- if (ctrl->parent) {
- intc->reg_pending = reg_base + ctrl->offset;
- intc->reg_mask = reg_base + ctrl->offset + 0x4;
-
- if (*(ctrl->parent)) {
- intc->parent = *(ctrl->parent);
- } else {
- pr_warn("irq: parent of %s missing\n",
- ctrl->name);
- kfree(intc->irqs);
- kfree(intc);
- continue;
- }
- } else {
- intc->reg_pending = reg_base + ctrl->offset;
- intc->reg_mask = reg_base + ctrl->offset + 0x08;
- intc->reg_intpnd = reg_base + ctrl->offset + 0x10;
- }
-
- s3c24xx_clear_intc(intc);
- s3c_intc[i] = intc;
- }
-
- set_handle_irq(s3c24xx_handle_irq);
-
- return 0;
-}
-
-static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = {
- {
- .name = "intc",
- .offset = 0,
- }, {
- .name = "subintc",
- .offset = 0x18,
- .parent = &s3c_intc[0],
- }
-};
-
-int __init s3c2410_init_intc_of(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- return s3c_init_intc_of(np, interrupt_parent,
- s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl));
-}
-IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of);
-
-static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = {
- {
- .name = "intc",
- .offset = 0,
- }, {
- .name = "subintc",
- .offset = 0x18,
- .parent = &s3c_intc[0],
- }, {
- .name = "intc2",
- .offset = 0x40,
- }
-};
-
-int __init s3c2416_init_intc_of(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- return s3c_init_intc_of(np, interrupt_parent,
- s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl));
-}
-IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of);
-#endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2006 American Microsystems Limited
-// David Anders <danders@amltd.com>
-//
-// @History:
-// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/gpio-cfg.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-
-#include "common.h"
-
-static struct resource amlm5900_nor_resource =
- DEFINE_RES_MEM(0x00000000, SZ_16M);
-
-static struct mtd_partition amlm5900_mtd_partitions[] = {
- {
- .name = "System",
- .size = 0x240000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- .name = "Kernel",
- .size = 0x100000,
- .offset = MTDPART_OFS_APPEND,
- }, {
- .name = "Ramdisk",
- .size = 0x300000,
- .offset = MTDPART_OFS_APPEND,
- }, {
- .name = "JFFS2",
- .size = 0x9A0000,
- .offset = MTDPART_OFS_APPEND,
- }, {
- .name = "Settings",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND,
- }
-};
-
-static struct physmap_flash_data amlm5900_flash_data = {
- .width = 2,
- .parts = amlm5900_mtd_partitions,
- .nr_parts = ARRAY_SIZE(amlm5900_mtd_partitions),
-};
-
-static struct platform_device amlm5900_device_nor = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &amlm5900_flash_data,
- },
- .num_resources = 1,
- .resource = &amlm5900_nor_resource,
-};
-
-static struct map_desc amlm5900_iodesc[] __initdata = {
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- }
-};
-
-static struct gpiod_lookup_table amlm5900_mmc_gpio_table = {
- .dev_id = "s3c2410-sdi",
- .table = {
- /* bus pins */
- GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct platform_device *amlm5900_devices[] __initdata = {
-#ifdef CONFIG_FB_S3C2410
- &s3c_device_lcd,
-#endif
- &s3c_device_adc,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_ohci,
- &s3c_device_rtc,
- &s3c_device_usbgadget,
- &s3c_device_sdi,
- &amlm5900_device_nor,
-};
-
-static void __init amlm5900_map_io(void)
-{
- s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
- s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init amlm5900_init_time(void)
-{
- s3c2410_init_clocks(12000000);
- samsung_timer_init();
-}
-
-#ifdef CONFIG_FB_S3C2410
-static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
- .width = 160,
- .height = 160,
-
- .type = S3C2410_LCDCON1_STN4,
-
- .pixclock = 680000, /* HCLK = 100MHz */
- .xres = 160,
- .yres = 160,
- .bpp = 4,
- .left_margin = 1 << (4 + 3),
- .right_margin = 8 << 3,
- .hsync_len = 48,
- .upper_margin = 0,
- .lower_margin = 0,
-
- .lcdcon5 = 0x00000001,
-};
-
-static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = {
-
- .displays = &amlm5900_lcd_info,
- .num_displays = 1,
- .default_display = 0,
-
- .gpccon = 0xaaaaaaaa,
- .gpccon_mask = 0xffffffff,
- .gpccon_reg = S3C2410_GPCCON,
- .gpcup = 0x0000ffff,
- .gpcup_mask = 0xffffffff,
- .gpcup_reg = S3C2410_GPCUP,
-
- .gpdcon = 0xaaaaaaaa,
- .gpdcon_mask = 0xffffffff,
- .gpdcon_reg = S3C2410_GPDCON,
- .gpdup = 0x0000ffff,
- .gpdup_mask = 0xffffffff,
- .gpdup_reg = S3C2410_GPDUP,
-};
-#endif
-
-static irqreturn_t
-amlm5900_wake_interrupt(int irq, void *ignored)
-{
- return IRQ_HANDLED;
-}
-
-static void amlm5900_init_pm(void)
-{
- int ret = 0;
-
- ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt,
- IRQF_TRIGGER_RISING | IRQF_SHARED,
- "amlm5900_wakeup", &amlm5900_wake_interrupt);
- if (ret != 0) {
- printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret);
- } else {
- enable_irq_wake(IRQ_EINT9);
- /* configure the suspend/resume status pin */
- s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
- s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP);
- }
-}
-static void __init amlm5900_init(void)
-{
- amlm5900_init_pm();
-#ifdef CONFIG_FB_S3C2410
- s3c24xx_fb_set_platdata(&amlm5900_fb_info);
-#endif
- s3c_i2c0_set_platdata(NULL);
- gpiod_add_lookup_table(&amlm5900_mmc_gpio_table);
- platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
-}
-
-MACHINE_START(AML_M5900, "AML_M5900")
- .atag_offset = 0x100,
- .map_io = amlm5900_map_io,
- .init_irq = s3c2410_init_irq,
- .init_machine = amlm5900_init,
- .init_time = amlm5900_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2003-2009 Simtec Electronics
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <net/ax88796.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-
-#include "anubis.h"
-#include "common.h"
-#include "simtec.h"
-
-#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
-
-static struct map_desc anubis_iodesc[] __initdata = {
- /* ISA IO areas */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(0x0),
- .length = SZ_4M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(0x0),
- .length = SZ_4M,
- .type = MT_DEVICE,
- },
-
- /* we could possibly compress the next set down into a set of smaller tables
- * pagetables, but that would mean using an L2 section, and it still means
- * we cannot actually feed the same register to an LDR due to 16K spacing
- */
-
- /* CPLD control registers */
-
- {
- .virtual = (u32)ANUBIS_VA_CTRL1,
- .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)ANUBIS_VA_IDREG,
- .pfn = __phys_to_pfn(ANUBIS_PA_IDREG),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- },
- [1] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- },
-};
-
-/* NAND Flash on Anubis board */
-
-static int external_map[] = { 2 };
-static int chip0_map[] = { 0 };
-static int chip1_map[] = { 1 };
-
-static struct mtd_partition __initdata anubis_default_nand_part[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_16K,
- .offset = 0,
- },
- [1] = {
- .name = "/boot",
- .size = SZ_4M - SZ_16K,
- .offset = SZ_16K,
- },
- [2] = {
- .name = "user1",
- .offset = SZ_4M,
- .size = SZ_32M - SZ_4M,
- },
- [3] = {
- .name = "user2",
- .offset = SZ_32M,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_128K,
- .offset = 0,
- },
- [1] = {
- .name = "/boot",
- .size = SZ_4M - SZ_128K,
- .offset = SZ_128K,
- },
- [2] = {
- .name = "user1",
- .offset = SZ_4M,
- .size = SZ_32M - SZ_4M,
- },
- [3] = {
- .name = "user2",
- .offset = SZ_32M,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-/* the Anubis has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
- [1] = {
- .name = "External",
- .nr_chips = 1,
- .nr_map = external_map,
- .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
- .partitions = anubis_default_nand_part,
- },
- [0] = {
- .name = "chip0",
- .nr_chips = 1,
- .nr_map = chip0_map,
- .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
- .partitions = anubis_default_nand_part,
- },
- [2] = {
- .name = "chip1",
- .nr_chips = 1,
- .nr_map = chip1_map,
- .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
- .partitions = anubis_default_nand_part,
- },
-};
-
-static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
-{
- unsigned int tmp;
-
- slot = set->nr_map[slot] & 3;
-
- pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
- slot, set, set->nr_map);
-
- tmp = __raw_readb(ANUBIS_VA_CTRL1);
- tmp &= ~ANUBIS_CTRL1_NANDSEL;
- tmp |= slot;
-
- pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
-
- __raw_writeb(tmp, ANUBIS_VA_CTRL1);
-}
-
-static struct s3c2410_platform_nand __initdata anubis_nand_info = {
- .tacls = 25,
- .twrph0 = 55,
- .twrph1 = 40,
- .nr_sets = ARRAY_SIZE(anubis_nand_sets),
- .sets = anubis_nand_sets,
- .select_chip = anubis_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-/* IDE channels */
-
-static struct pata_platform_info anubis_ide_platdata = {
- .ioport_shift = 5,
-};
-
-static struct resource anubis_ide0_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
- [2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
- [3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
-};
-
-static struct platform_device anubis_device_ide0 = {
- .name = "pata_platform",
- .id = 0,
- .num_resources = ARRAY_SIZE(anubis_ide0_resource),
- .resource = anubis_ide0_resource,
- .dev = {
- .platform_data = &anubis_ide_platdata,
- .coherent_dma_mask = ~0,
- },
-};
-
-static struct resource anubis_ide1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
- [1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
- [2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
-};
-
-static struct platform_device anubis_device_ide1 = {
- .name = "pata_platform",
- .id = 1,
- .num_resources = ARRAY_SIZE(anubis_ide1_resource),
- .resource = anubis_ide1_resource,
- .dev = {
- .platform_data = &anubis_ide_platdata,
- .coherent_dma_mask = ~0,
- },
-};
-
-/* Asix AX88796 10/100 ethernet controller */
-
-static struct ax_plat_data anubis_asix_platdata = {
- .flags = AXFLG_MAC_FROMDEV,
- .wordlength = 2,
- .dcr_val = 0x48,
- .rcr_val = 0x40,
-};
-
-static struct resource anubis_asix_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
- [1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX),
-};
-
-static struct platform_device anubis_device_asix = {
- .name = "ax88796",
- .id = 0,
- .num_resources = ARRAY_SIZE(anubis_asix_resource),
- .resource = anubis_asix_resource,
- .dev = {
- .platform_data = &anubis_asix_platdata,
- }
-};
-
-/* SM501 */
-
-static struct resource anubis_sm501_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_CS2, SZ_8M),
- [1] = DEFINE_RES_MEM(S3C2410_CS2 + SZ_64M - SZ_2M, SZ_2M),
- [2] = DEFINE_RES_IRQ(IRQ_EINT0),
-};
-
-static struct sm501_initdata anubis_sm501_initdata = {
- .gpio_high = {
- .set = 0x3F000000, /* 24bit panel */
- .mask = 0x0,
- },
- .misc_timing = {
- .set = 0x010100, /* SDRAM timing */
- .mask = 0x1F1F00,
- },
- .misc_control = {
- .set = SM501_MISC_PNL_24BIT,
- .mask = 0,
- },
-
- .devices = SM501_USE_GPIO,
-
- /* set the SDRAM and bus clocks */
- .mclk = 72 * MHZ,
- .m1xclk = 144 * MHZ,
-};
-
-static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
- [0] = {
- .bus_num = 1,
- .pin_scl = 44,
- .pin_sda = 45,
- },
- [1] = {
- .bus_num = 2,
- .pin_scl = 40,
- .pin_sda = 41,
- },
-};
-
-static struct sm501_platdata anubis_sm501_platdata = {
- .init = &anubis_sm501_initdata,
- .gpio_base = -1,
- .gpio_i2c = anubis_sm501_gpio_i2c,
- .gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c),
-};
-
-static struct platform_device anubis_device_sm501 = {
- .name = "sm501",
- .id = 0,
- .num_resources = ARRAY_SIZE(anubis_sm501_resource),
- .resource = anubis_sm501_resource,
- .dev = {
- .platform_data = &anubis_sm501_platdata,
- },
-};
-
-/* Standard Anubis devices */
-
-static struct platform_device *anubis_devices[] __initdata = {
- &s3c2410_device_dclk,
- &s3c_device_ohci,
- &s3c_device_wdt,
- &s3c_device_adc,
- &s3c_device_i2c0,
- &s3c_device_rtc,
- &s3c_device_nand,
- &anubis_device_ide0,
- &anubis_device_ide1,
- &anubis_device_asix,
- &anubis_device_sm501,
-};
-
-/* I2C devices. */
-
-static struct i2c_board_info anubis_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("tps65011", 0x48),
- .irq = IRQ_EINT20,
- }
-};
-
-/* Audio setup */
-static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
- .have_mic = 1,
- .have_lout = 1,
- .output_cdclk = 1,
- .use_mpllin = 1,
- .amp_gpio = S3C2410_GPB(2),
- .amp_gain[0] = S3C2410_GPD(10),
- .amp_gain[1] = S3C2410_GPD(11),
-};
-
-static void __init anubis_map_io(void)
-{
- s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
- s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-
- /* check for the newer revision boards with large page nand */
-
- if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
- printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
- __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
- anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
- anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
- } else {
- /* ensure that the GPIO is setup */
- gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
- gpio_free(S3C2410_GPA(0));
- }
-}
-
-static void __init anubis_init_time(void)
-{
- s3c2440_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void __init anubis_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- s3c_nand_set_platdata(&anubis_nand_info);
- simtec_audio_add(NULL, false, &anubis_audio);
-
- platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
-
- i2c_register_board_info(0, anubis_i2c_devs,
- ARRAY_SIZE(anubis_i2c_devs));
-}
-
-
-MACHINE_START(ANUBIS, "Simtec-Anubis")
- /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .atag_offset = 0x100,
- .map_io = anubis_map_io,
- .init_machine = anubis_init,
- .init_irq = s3c2440_init_irq,
- .init_time = anubis_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
-// Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
-// and modifications by SBZ <sbz@spgui.org> and
-// Weibing <http://weibing.blogbus.com>
-//
-// For product information, visit http://www.arm.com/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio/machine.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/dm9000.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-
-#include "common.h"
-
-static struct map_desc at2440evb_iodesc[] __initdata = {
- /* Nothing here */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- },
-};
-
-/* NAND Flash on AT2440EVB board */
-
-static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_256K,
- .offset = 0,
- },
- [1] = {
- .name = "Kernel",
- .size = SZ_2M,
- .offset = SZ_256K,
- },
- [2] = {
- .name = "Root",
- .offset = SZ_256K + SZ_2M,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
- [0] = {
- .name = "nand",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(at2440evb_default_nand_part),
- .partitions = at2440evb_default_nand_part,
- },
-};
-
-static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
- .tacls = 25,
- .twrph0 = 55,
- .twrph1 = 40,
- .nr_sets = ARRAY_SIZE(at2440evb_nand_sets),
- .sets = at2440evb_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource at2440evb_dm9k_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_CS3, 4),
- [1] = DEFINE_RES_MEM(S3C2410_CS3 + 4, 4),
- [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
- | IORESOURCE_IRQ_HIGHEDGE),
-};
-
-static struct dm9000_plat_data at2440evb_dm9k_pdata = {
- .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device at2440evb_device_eth = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(at2440evb_dm9k_resource),
- .resource = at2440evb_dm9k_resource,
- .dev = {
- .platform_data = &at2440evb_dm9k_pdata,
- },
-};
-
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
- .set_power = s3c24xx_mci_def_set_power,
-};
-
-static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
- .dev_id = "s3c2410-sdi",
- .table = {
- /* Card detect S3C2410_GPG(10) */
- GPIO_LOOKUP("GPIOG", 10, "cd", GPIO_ACTIVE_LOW),
- /* bus pins */
- GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-
-/* 7" LCD panel */
-
-static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
-
- .lcdcon5 = S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_PWREN |
- S3C2410_LCDCON5_HWSWP,
-
- .type = S3C2410_LCDCON1_TFT,
-
- .width = 800,
- .height = 480,
-
- .pixclock = 33333, /* HCLK 60 MHz, divisor 2 */
- .xres = 800,
- .yres = 480,
- .bpp = 16,
- .left_margin = 88,
- .right_margin = 40,
- .hsync_len = 128,
- .upper_margin = 32,
- .lower_margin = 11,
- .vsync_len = 2,
-};
-
-static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
- .displays = &at2440evb_lcd_cfg,
- .num_displays = 1,
- .default_display = 0,
-};
-
-static struct platform_device *at2440evb_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_wdt,
- &s3c_device_adc,
- &s3c_device_i2c0,
- &s3c_device_rtc,
- &s3c_device_nand,
- &s3c_device_sdi,
- &s3c_device_lcd,
- &at2440evb_device_eth,
-};
-
-static void __init at2440evb_map_io(void)
-{
- s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
- s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init at2440evb_init_time(void)
-{
- s3c2440_init_clocks(16934400);
- samsung_timer_init();
-}
-
-static void __init at2440evb_init(void)
-{
- s3c24xx_fb_set_platdata(&at2440evb_fb_info);
- gpiod_add_lookup_table(&at2440evb_mci_gpio_table);
- s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
- s3c_nand_set_platdata(&at2440evb_nand_info);
- s3c_i2c0_set_platdata(NULL);
-
- platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
-}
-
-
-MACHINE_START(AT2440EVB, "AT2440EVB")
- .atag_offset = 0x100,
- .map_io = at2440evb_map_io,
- .init_machine = at2440evb_init,
- .init_irq = s3c2440_init_irq,
- .init_time = at2440evb_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2003-2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.simtec.co.uk/products/EB2410ITX/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/dm9000.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include <linux/platform_data/hwmon-s3c.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-
-#include <net/ax88796.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <linux/soc/samsung/s3c-cpu-freq.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-
-#include "bast.h"
-#include "common.h"
-#include "simtec.h"
-
-#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
-
-/* macros for virtual address mods for the io space entries */
-#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
-#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
-#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
-#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
-
-/* macros to modify the physical addresses for io space */
-
-#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
-#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
-#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
-#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
-
-static struct map_desc bast_iodesc[] __initdata = {
- /* ISA IO areas */
- {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = PA_CS2(BAST_PA_ISAIO),
- .length = SZ_16M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = PA_CS3(BAST_PA_ISAIO),
- .length = SZ_16M,
- .type = MT_DEVICE,
- },
- /* bast CPLD control registers, and external interrupt controls */
- {
- .virtual = (u32)BAST_VA_CTRL1,
- .pfn = __phys_to_pfn(BAST_PA_CTRL1),
- .length = SZ_1M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)BAST_VA_CTRL2,
- .pfn = __phys_to_pfn(BAST_PA_CTRL2),
- .length = SZ_1M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)BAST_VA_CTRL3,
- .pfn = __phys_to_pfn(BAST_PA_CTRL3),
- .length = SZ_1M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)BAST_VA_CTRL4,
- .pfn = __phys_to_pfn(BAST_PA_CTRL4),
- .length = SZ_1M,
- .type = MT_DEVICE,
- },
- /* PC104 IRQ mux */
- {
- .virtual = (u32)BAST_VA_PC104_IRQREQ,
- .pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ),
- .length = SZ_1M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)BAST_VA_PC104_IRQRAW,
- .pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW),
- .length = SZ_1M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)BAST_VA_PC104_IRQMASK,
- .pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK),
- .length = SZ_1M,
- .type = MT_DEVICE,
- },
-
- /* peripheral space... one for each of fast/slow/byte/16bit */
- /* note, ide is only decoded in word space, even though some registers
- * are only 8bit */
-
- /* slow, byte */
- { VA_C2(BAST_VA_ISAIO), PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
- { VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
- { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
-
- /* slow, word */
- { VA_C3(BAST_VA_ISAIO), PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
- { VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
- { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
-
- /* fast, byte */
- { VA_C4(BAST_VA_ISAIO), PA_CS4(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
- { VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
- { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
-
- /* fast, word */
- { VA_C5(BAST_VA_ISAIO), PA_CS5(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
- { VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
- { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- /* port 2 is not actually used */
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- }
-};
-
-/* NAND Flash on BAST board */
-
-#ifdef CONFIG_PM
-static int bast_pm_suspend(void)
-{
- /* ensure that an nRESET is not generated on resume. */
- gpio_direction_output(S3C2410_GPA(21), 1);
- return 0;
-}
-
-static void bast_pm_resume(void)
-{
- s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-}
-
-#else
-#define bast_pm_suspend NULL
-#define bast_pm_resume NULL
-#endif
-
-static struct syscore_ops bast_pm_syscore_ops = {
- .suspend = bast_pm_suspend,
- .resume = bast_pm_resume,
-};
-
-static int smartmedia_map[] = { 0 };
-static int chip0_map[] = { 1 };
-static int chip1_map[] = { 2 };
-static int chip2_map[] = { 3 };
-
-static struct mtd_partition __initdata bast_default_nand_part[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_16K,
- .offset = 0,
- },
- [1] = {
- .name = "/boot",
- .size = SZ_4M - SZ_16K,
- .offset = SZ_16K,
- },
- [2] = {
- .name = "user",
- .offset = SZ_4M,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-/* the bast has 4 selectable slots for nand-flash, the three
- * on-board chip areas, as well as the external SmartMedia
- * slot.
- *
- * Note, there is no current hot-plug support for the SmartMedia
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
- [0] = {
- .name = "SmartMedia",
- .nr_chips = 1,
- .nr_map = smartmedia_map,
- .options = NAND_SCAN_SILENT_NODEV,
- .nr_partitions = ARRAY_SIZE(bast_default_nand_part),
- .partitions = bast_default_nand_part,
- },
- [1] = {
- .name = "chip0",
- .nr_chips = 1,
- .nr_map = chip0_map,
- .nr_partitions = ARRAY_SIZE(bast_default_nand_part),
- .partitions = bast_default_nand_part,
- },
- [2] = {
- .name = "chip1",
- .nr_chips = 1,
- .nr_map = chip1_map,
- .options = NAND_SCAN_SILENT_NODEV,
- .nr_partitions = ARRAY_SIZE(bast_default_nand_part),
- .partitions = bast_default_nand_part,
- },
- [3] = {
- .name = "chip2",
- .nr_chips = 1,
- .nr_map = chip2_map,
- .options = NAND_SCAN_SILENT_NODEV,
- .nr_partitions = ARRAY_SIZE(bast_default_nand_part),
- .partitions = bast_default_nand_part,
- }
-};
-
-static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
-{
- unsigned int tmp;
-
- slot = set->nr_map[slot] & 3;
-
- pr_debug("bast_nand: selecting slot %d (set %p,%p)\n",
- slot, set, set->nr_map);
-
- tmp = __raw_readb(BAST_VA_CTRL2);
- tmp &= BAST_CPLD_CTLR2_IDERST;
- tmp |= slot;
- tmp |= BAST_CPLD_CTRL2_WNAND;
-
- pr_debug("bast_nand: ctrl2 now %02x\n", tmp);
-
- __raw_writeb(tmp, BAST_VA_CTRL2);
-}
-
-static struct s3c2410_platform_nand __initdata bast_nand_info = {
- .tacls = 30,
- .twrph0 = 60,
- .twrph1 = 60,
- .nr_sets = ARRAY_SIZE(bast_nand_sets),
- .sets = bast_nand_sets,
- .select_chip = bast_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-/* DM9000 */
-
-static struct resource bast_dm9k_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
- [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
- [2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
- | IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-/* for the moment we limit ourselves to 16bit IO until some
- * better IO routines can be written and tested
-*/
-
-static struct dm9000_plat_data bast_dm9k_platdata = {
- .flags = DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device bast_device_dm9k = {
- .name = "dm9000",
- .id = 0,
- .num_resources = ARRAY_SIZE(bast_dm9k_resource),
- .resource = bast_dm9k_resource,
- .dev = {
- .platform_data = &bast_dm9k_platdata,
- }
-};
-
-/* serial devices */
-
-#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO)
-#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
-#define SERIAL_CLK (1843200)
-
-static struct plat_serial8250_port bast_sio_data[] = {
- [0] = {
- .mapbase = SERIAL_BASE + 0x2f8,
- .irq = BAST_IRQ_PCSERIAL1,
- .flags = SERIAL_FLAGS,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = SERIAL_CLK,
- },
- [1] = {
- .mapbase = SERIAL_BASE + 0x3f8,
- .irq = BAST_IRQ_PCSERIAL2,
- .flags = SERIAL_FLAGS,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = SERIAL_CLK,
- },
- { }
-};
-
-static struct platform_device bast_sio = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = &bast_sio_data,
- },
-};
-
-/* we have devices on the bus which cannot work much over the
- * standard 100KHz i2c bus frequency
-*/
-
-static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
- .flags = 0,
- .slave_addr = 0x10,
- .frequency = 100*1000,
-};
-
-/* Asix AX88796 10/100 ethernet controller */
-
-static struct ax_plat_data bast_asix_platdata = {
- .flags = AXFLG_MAC_FROMDEV,
- .wordlength = 2,
- .dcr_val = 0x48,
- .rcr_val = 0x40,
-};
-
-static struct resource bast_asix_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
- [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
- [2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX),
-};
-
-static struct platform_device bast_device_asix = {
- .name = "ax88796",
- .id = 0,
- .num_resources = ARRAY_SIZE(bast_asix_resource),
- .resource = bast_asix_resource,
- .dev = {
- .platform_data = &bast_asix_platdata
- }
-};
-
-/* Asix AX88796 10/100 ethernet controller parallel port */
-
-static struct resource bast_asixpp_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \
- 0x30 * 0x20),
-};
-
-static struct platform_device bast_device_axpp = {
- .name = "ax88796-pp",
- .id = 0,
- .num_resources = ARRAY_SIZE(bast_asixpp_resource),
- .resource = bast_asixpp_resource,
-};
-
-/* LCD/VGA controller */
-
-static struct s3c2410fb_display __initdata bast_lcd_info[] = {
- {
- .type = S3C2410_LCDCON1_TFT,
- .width = 640,
- .height = 480,
-
- .pixclock = 33333,
- .xres = 640,
- .yres = 480,
- .bpp = 4,
- .left_margin = 40,
- .right_margin = 20,
- .hsync_len = 88,
- .upper_margin = 30,
- .lower_margin = 32,
- .vsync_len = 3,
-
- .lcdcon5 = 0x00014b02,
- },
- {
- .type = S3C2410_LCDCON1_TFT,
- .width = 640,
- .height = 480,
-
- .pixclock = 33333,
- .xres = 640,
- .yres = 480,
- .bpp = 8,
- .left_margin = 40,
- .right_margin = 20,
- .hsync_len = 88,
- .upper_margin = 30,
- .lower_margin = 32,
- .vsync_len = 3,
-
- .lcdcon5 = 0x00014b02,
- },
- {
- .type = S3C2410_LCDCON1_TFT,
- .width = 640,
- .height = 480,
-
- .pixclock = 33333,
- .xres = 640,
- .yres = 480,
- .bpp = 16,
- .left_margin = 40,
- .right_margin = 20,
- .hsync_len = 88,
- .upper_margin = 30,
- .lower_margin = 32,
- .vsync_len = 3,
-
- .lcdcon5 = 0x00014b02,
- },
-};
-
-/* LCD/VGA controller */
-
-static struct s3c2410fb_mach_info __initdata bast_fb_info = {
-
- .displays = bast_lcd_info,
- .num_displays = ARRAY_SIZE(bast_lcd_info),
- .default_display = 1,
-};
-
-/* I2C devices fitted. */
-
-static struct i2c_board_info bast_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- }, {
- I2C_BOARD_INFO("simtec-pmu", 0x6b),
- }, {
- I2C_BOARD_INFO("ch7013", 0x75),
- },
-};
-
-static struct s3c_hwmon_pdata bast_hwmon_info = {
- /* LCD contrast (0-6.6V) */
- .in[0] = &(struct s3c_hwmon_chcfg) {
- .name = "lcd-contrast",
- .mult = 3300,
- .div = 512,
- },
- /* LED current feedback */
- .in[1] = &(struct s3c_hwmon_chcfg) {
- .name = "led-feedback",
- .mult = 3300,
- .div = 1024,
- },
- /* LCD feedback (0-6.6V) */
- .in[2] = &(struct s3c_hwmon_chcfg) {
- .name = "lcd-feedback",
- .mult = 3300,
- .div = 512,
- },
- /* Vcore (1.8-2.0V), Vref 3.3V */
- .in[3] = &(struct s3c_hwmon_chcfg) {
- .name = "vcore",
- .mult = 3300,
- .div = 1024,
- },
-};
-
-/* Standard BAST devices */
-// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
-
-static struct platform_device *bast_devices[] __initdata = {
- &s3c2410_device_dclk,
- &s3c_device_ohci,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_rtc,
- &s3c_device_nand,
- &s3c_device_adc,
- &s3c_device_hwmon,
- &bast_device_dm9k,
- &bast_device_asix,
- &bast_device_axpp,
- &bast_sio,
-};
-
-static struct s3c_cpufreq_board __initdata bast_cpufreq = {
- .refresh = 7800, /* 7.8usec */
- .auto_io = 1,
- .need_io = 1,
-};
-
-static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
- .have_mic = 1,
- .have_lout = 1,
-};
-
-static void __init bast_map_io(void)
-{
- s3c_hwmon_set_platdata(&bast_hwmon_info);
-
- s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
- s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init bast_init_time(void)
-{
- s3c2410_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void __init bast_init(void)
-{
- register_syscore_ops(&bast_pm_syscore_ops);
-
- s3c_i2c0_set_platdata(&bast_i2c_info);
- s3c_nand_set_platdata(&bast_nand_info);
- s3c24xx_fb_set_platdata(&bast_fb_info);
- platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
-
- i2c_register_board_info(0, bast_i2c_devs,
- ARRAY_SIZE(bast_i2c_devs));
-
- usb_simtec_init();
- nor_simtec_init();
- simtec_audio_add(NULL, true, &bast_audio);
-
- WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset"));
-
- s3c_cpufreq_setboard(&bast_cpufreq);
-}
-
-MACHINE_START(BAST, "Simtec-BAST")
- /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .atag_offset = 0x100,
- .map_io = bast_map_io,
- .init_irq = s3c2410_init_irq,
- .init_machine = bast_init,
- .init_time = bast_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
-//
-// Copyright (C) 2006-2009 by Openmoko, Inc.
-// Authors: Harald Welte <laforge@openmoko.org>
-// Andy Green <andy@openmoko.org>
-// Werner Almesberger <werner@openmoko.org>
-// All rights reserved.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-
-#include <linux/mmc/host.h>
-
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/backlight.h>
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/pmic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <linux/regulator/machine.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/s3c24xx.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-irq.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
-
-#include "common.h"
-#include "gta02.h"
-
-static struct pcf50633 *gta02_pcf;
-
-/*
- * This gets called frequently when we paniced.
- */
-
-static long gta02_panic_blink(int state)
-{
- long delay = 0;
- char led;
-
- led = (state) ? 1 : 0;
- gpio_direction_output(GTA02_GPIO_AUX_LED, led);
-
- return delay;
-}
-
-
-static struct map_desc gta02_iodesc[] __initdata = {
- {
- .virtual = 0xe0000000,
- .pfn = __phys_to_pfn(S3C2410_CS3 + 0x01000000),
- .length = SZ_1M,
- .type = MT_DEVICE
- },
-};
-
-#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg gta02_uartcfgs[] = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-#ifdef CONFIG_CHARGER_PCF50633
-/*
- * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
- * We use this to recognize that we can pull 1A from the USB socket.
- *
- * These constants are the measured pcf50633 ADC levels with the 1A
- * charger / 48K resistor, and with no pulldown resistor.
- */
-
-#define ADC_NOM_CHG_DETECT_1A 6
-#define ADC_NOM_CHG_DETECT_USB 43
-
-#ifdef CONFIG_PCF50633_ADC
-static void
-gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
-{
- int ma;
-
- /* Interpret charger type */
- if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
-
- /*
- * Sanity - stop GPO driving out now that we have a 1A charger
- * GPO controls USB Host power generation on GTA02
- */
- pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
-
- ma = 1000;
- } else
- ma = 100;
-
- pcf50633_mbc_usb_curlim_set(pcf, ma);
-}
-#endif
-
-static struct delayed_work gta02_charger_work;
-static int gta02_usb_vbus_draw;
-
-static void gta02_charger_worker(struct work_struct *work)
-{
- if (gta02_usb_vbus_draw) {
- pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
- return;
- }
-
-#ifdef CONFIG_PCF50633_ADC
- pcf50633_adc_async_read(gta02_pcf,
- PCF50633_ADCC1_MUX_ADCIN1,
- PCF50633_ADCC1_AVERAGE_16,
- gta02_configure_pmu_for_charger,
- NULL);
-#else
- /*
- * If the PCF50633 ADC is disabled we fallback to a
- * 100mA limit for safety.
- */
- pcf50633_mbc_usb_curlim_set(gta02_pcf, 100);
-#endif
-}
-
-#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
-
-static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
-{
- if (irq == PCF50633_IRQ_USBINS) {
- schedule_delayed_work(>a02_charger_work,
- GTA02_CHARGER_CONFIGURE_TIMEOUT);
-
- return;
- }
-
- if (irq == PCF50633_IRQ_USBREM) {
- cancel_delayed_work_sync(>a02_charger_work);
- gta02_usb_vbus_draw = 0;
- }
-}
-
-static void gta02_udc_vbus_draw(unsigned int ma)
-{
- if (!gta02_pcf)
- return;
-
- gta02_usb_vbus_draw = ma;
-
- schedule_delayed_work(>a02_charger_work,
- GTA02_CHARGER_CONFIGURE_TIMEOUT);
-}
-#else /* !CONFIG_CHARGER_PCF50633 */
-#define gta02_pmu_event_callback NULL
-#define gta02_udc_vbus_draw NULL
-#endif
-
-static char *gta02_batteries[] = {
- "battery",
-};
-
-static struct pcf50633_bl_platform_data gta02_backlight_data = {
- .default_brightness = 0x3f,
- .default_brightness_limit = 0,
- .ramp_time = 5,
-};
-
-static struct pcf50633_platform_data gta02_pcf_pdata = {
- .resumers = {
- [0] = PCF50633_INT1_USBINS |
- PCF50633_INT1_USBREM |
- PCF50633_INT1_ALARM,
- [1] = PCF50633_INT2_ONKEYF,
- [2] = PCF50633_INT3_ONKEY1S,
- [3] = PCF50633_INT4_LOWSYS |
- PCF50633_INT4_LOWBAT |
- PCF50633_INT4_HIGHTMP,
- },
-
- .batteries = gta02_batteries,
- .num_batteries = ARRAY_SIZE(gta02_batteries),
-
- .charger_reference_current_ma = 1000,
-
- .backlight_data = >a02_backlight_data,
-
- .reg_init_data = {
- [PCF50633_REGULATOR_AUTO] = {
- .constraints = {
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .always_on = 1,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_DOWN1] = {
- .constraints = {
- .min_uV = 1300000,
- .max_uV = 1600000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .always_on = 1,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_DOWN2] = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- .always_on = 1,
- },
- },
- [PCF50633_REGULATOR_HCLDO] = {
- .constraints = {
- .min_uV = 2000000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- },
- },
- [PCF50633_REGULATOR_LDO1] = {
- .constraints = {
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_LDO2] = {
- .constraints = {
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_LDO3] = {
- .constraints = {
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_LDO4] = {
- .constraints = {
- .min_uV = 3200000,
- .max_uV = 3200000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_LDO5] = {
- .constraints = {
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
- },
- [PCF50633_REGULATOR_LDO6] = {
- .constraints = {
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- },
- },
- [PCF50633_REGULATOR_MEMLDO] = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- },
- },
-
- },
- .mbc_event_callback = gta02_pmu_event_callback,
-};
-
-
-/* NOR Flash. */
-
-#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */
-#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */
-
-static struct physmap_flash_data gta02_nor_flash_data = {
- .width = 2,
-};
-
-static struct resource gta02_nor_flash_resource =
- DEFINE_RES_MEM(GTA02_FLASH_BASE, GTA02_FLASH_SIZE);
-
-static struct platform_device gta02_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = >a02_nor_flash_data,
- },
- .resource = >a02_nor_flash_resource,
- .num_resources = 1,
-};
-
-
-static struct platform_device s3c24xx_pwm_device = {
- .name = "s3c24xx_pwm",
- .num_resources = 0,
-};
-
-static struct platform_device gta02_dfbmcs320_device = {
- .name = "dfbmcs320",
-};
-
-static struct i2c_board_info gta02_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("pcf50633", 0x73),
- .irq = GTA02_IRQ_PCF50633,
- .platform_data = >a02_pcf_pdata,
- },
- {
- I2C_BOARD_INFO("wm8753", 0x1a),
- },
-};
-
-static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
- [0] = {
- /*
- * This name is also hard-coded in the boot loaders, so
- * changing it would would require all users to upgrade
- * their boot loaders, some of which are stored in a NOR
- * that is considered to be immutable.
- */
- .name = "neo1973-nand",
- .nr_chips = 1,
- .flash_bbt = 1,
- },
-};
-
-/*
- * Choose a set of timings derived from S3C@2442B MCP54
- * data sheet (K5D2G13ACM-D075 MCP Memory).
- */
-
-static struct s3c2410_platform_nand __initdata gta02_nand_info = {
- .tacls = 0,
- .twrph0 = 25,
- .twrph1 = 15,
- .nr_sets = ARRAY_SIZE(gta02_nand_sets),
- .sets = gta02_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-
-/* Get PMU to set USB current limit accordingly. */
-static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
- .vbus_draw = gta02_udc_vbus_draw,
- .pullup_pin = GTA02_GPIO_USB_PULLUP,
-};
-
-/* USB */
-static struct s3c2410_hcd_info gta02_usb_info __initdata = {
- .port[0] = {
- .flags = S3C_HCDFLG_USED,
- },
- .port[1] = {
- .flags = 0,
- },
-};
-
-/* Touchscreen */
-static struct s3c2410_ts_mach_info gta02_ts_info = {
- .delay = 10000,
- .presc = 0xff, /* slow as we can go */
- .oversampling_shift = 2,
-};
-
-/* Buttons */
-static struct gpio_keys_button gta02_buttons[] = {
- {
- .gpio = GTA02_GPIO_AUX_KEY,
- .code = KEY_PHONE,
- .desc = "Aux",
- .type = EV_KEY,
- .debounce_interval = 100,
- },
- {
- .gpio = GTA02_GPIO_HOLD_KEY,
- .code = KEY_PAUSE,
- .desc = "Hold",
- .type = EV_KEY,
- .debounce_interval = 100,
- },
-};
-
-static struct gpio_keys_platform_data gta02_buttons_pdata = {
- .buttons = gta02_buttons,
- .nbuttons = ARRAY_SIZE(gta02_buttons),
-};
-
-static struct platform_device gta02_buttons_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = >a02_buttons_pdata,
- },
-};
-
-static struct gpiod_lookup_table gta02_audio_gpio_table = {
- .dev_id = "neo1973-audio",
- .table = {
- GPIO_LOOKUP("GPIOJ", 2, "amp-shut", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPIOJ", 1, "hp", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct platform_device gta02_audio = {
- .name = "neo1973-audio",
- .id = -1,
-};
-
-static struct gpiod_lookup_table gta02_mmc_gpio_table = {
- .dev_id = "s3c2410-sdi",
- .table = {
- /* bus pins */
- GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static void __init gta02_map_io(void)
-{
- s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
- s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-
-/* These are the guys that don't need to be children of PMU. */
-
-static struct platform_device *gta02_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_wdt,
- &s3c_device_sdi,
- &s3c_device_usbgadget,
- &s3c_device_nand,
- >a02_nor_flash,
- &s3c24xx_pwm_device,
- &s3c_device_iis,
- &s3c_device_i2c0,
- >a02_dfbmcs320_device,
- >a02_buttons_device,
- &s3c_device_adc,
- &s3c_device_ts,
- >a02_audio,
-};
-
-static void gta02_poweroff(void)
-{
- pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
-}
-
-static void __init gta02_machine_init(void)
-{
- /* Set the panic callback to turn AUX LED on or off. */
- panic_blink = gta02_panic_blink;
-
- s3c_pm_init();
-
-#ifdef CONFIG_CHARGER_PCF50633
- INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker);
-#endif
-
- s3c24xx_udc_set_platdata(>a02_udc_cfg);
- s3c24xx_ts_set_platdata(>a02_ts_info);
- s3c_ohci_set_platdata(>a02_usb_info);
- s3c_nand_set_platdata(>a02_nand_info);
- s3c_i2c0_set_platdata(NULL);
-
- i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
-
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
- gpiod_add_lookup_table(>a02_audio_gpio_table);
- gpiod_add_lookup_table(>a02_mmc_gpio_table);
- platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
- pm_power_off = gta02_poweroff;
-
- regulator_has_full_constraints();
-}
-
-static void __init gta02_init_time(void)
-{
- s3c2442_init_clocks(12000000);
- samsung_timer_init();
-}
-
-MACHINE_START(NEO1973_GTA02, "GTA02")
- /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
- .atag_offset = 0x100,
- .map_io = gta02_map_io,
- .init_irq = s3c2442_init_irq,
- .init_machine = gta02_machine_init,
- .init_time = gta02_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2005 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// https://www.handhelds.org/projects/h1940.html
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/pda_power.h>
-#include <linux/s3c_adc_battery.h>
-#include <linux/delay.h>
-
-#include <video/platform_lcd.h>
-
-#include <linux/mmc/host.h>
-#include <linux/export.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-
-#include <sound/uda1380.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/map.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
-
-#include "common.h"
-#include "h1940.h"
-
-#define H1940_LATCH ((void __force __iomem *)0xF8000000)
-
-#define H1940_PA_LATCH S3C2410_CS2
-
-#define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END))
-
-#define S3C24XX_PLL_MDIV_SHIFT (12)
-#define S3C24XX_PLL_PDIV_SHIFT (4)
-#define S3C24XX_PLL_SDIV_SHIFT (0)
-
-static struct map_desc h1940_iodesc[] __initdata = {
- [0] = {
- .virtual = (unsigned long)H1940_LATCH,
- .pfn = __phys_to_pfn(H1940_PA_LATCH),
- .length = SZ_16K,
- .type = MT_DEVICE
- },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x245,
- .ulcon = 0x03,
- .ufcon = 0x00,
- },
- /* IR port */
- [2] = {
- .hwport = 2,
- .flags = 0,
- .uart_flags = UPF_CONS_FLOW,
- .ucon = 0x3c5,
- .ulcon = 0x43,
- .ufcon = 0x51,
- }
-};
-
-/* Board control latch control */
-
-static unsigned int latch_state;
-
-static void h1940_latch_control(unsigned int clear, unsigned int set)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- latch_state &= ~clear;
- latch_state |= set;
-
- __raw_writel(latch_state, H1940_LATCH);
-
- local_irq_restore(flags);
-}
-
-static inline int h1940_gpiolib_to_latch(int offset)
-{
- return 1 << (offset + 16);
-}
-
-static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- int latch_bit = h1940_gpiolib_to_latch(offset);
-
- h1940_latch_control(value ? 0 : latch_bit,
- value ? latch_bit : 0);
-}
-
-static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- h1940_gpiolib_latch_set(chip, offset, value);
- return 0;
-}
-
-static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
- unsigned offset)
-{
- return (latch_state >> (offset + 16)) & 1;
-}
-
-static struct gpio_chip h1940_latch_gpiochip = {
- .base = H1940_LATCH_GPIO(0),
- .owner = THIS_MODULE,
- .label = "H1940_LATCH",
- .ngpio = 16,
- .direction_output = h1940_gpiolib_latch_output,
- .set = h1940_gpiolib_latch_set,
- .get = h1940_gpiolib_latch_get,
-};
-
-static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG(5),
- .vbus_pin_inverted = 1,
- .pullup_pin = H1940_LATCH_USB_DP,
-};
-
-static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
- .cfg_gpio = s3c24xx_ts_cfg_gpio,
-};
-
-/*
- * Set lcd on or off
- */
-static struct s3c2410fb_display h1940_lcd __initdata = {
- .lcdcon5= S3C2410_LCDCON5_FRM565 | \
- S3C2410_LCDCON5_INVVLINE | \
- S3C2410_LCDCON5_HWSWP,
-
- .type = S3C2410_LCDCON1_TFT,
- .width = 240,
- .height = 320,
- .pixclock = 260000,
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .left_margin = 8,
- .right_margin = 20,
- .hsync_len = 4,
- .upper_margin = 8,
- .lower_margin = 7,
- .vsync_len = 1,
-};
-
-static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
- .displays = &h1940_lcd,
- .num_displays = 1,
- .default_display = 0,
-
- .lpcsel = 0x02,
- .gpccon = 0xaa940659,
- .gpccon_mask = 0xffffc0f0,
- .gpccon_reg = S3C2410_GPCCON,
- .gpcup = 0x0000ffff,
- .gpcup_mask = 0xffffffff,
- .gpcup_reg = S3C2410_GPCUP,
- .gpdcon = 0xaa84aaa0,
- .gpdcon_mask = 0xffffffff,
- .gpdcon_reg = S3C2410_GPDCON,
- .gpdup = 0x0000faff,
- .gpdup_mask = 0xffffffff,
- .gpdup_reg = S3C2410_GPDUP,
-};
-
-static int power_supply_init(struct device *dev)
-{
- return gpio_request(S3C2410_GPF(2), "cable plugged");
-}
-
-static int h1940_is_ac_online(void)
-{
- return !gpio_get_value(S3C2410_GPF(2));
-}
-
-static void power_supply_exit(struct device *dev)
-{
- gpio_free(S3C2410_GPF(2));
-}
-
-static char *h1940_supplicants[] = {
- "main-battery",
- "backup-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = h1940_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = h1940_supplicants,
- .num_supplicants = ARRAY_SIZE(h1940_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
- [0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
- | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data =
- &power_supply_info,
- },
- .resource = power_supply_resources,
- .num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
- { .volt = 4070, .cur = 162, .level = 100},
- { .volt = 4040, .cur = 165, .level = 95},
- { .volt = 4016, .cur = 164, .level = 90},
- { .volt = 3996, .cur = 166, .level = 85},
- { .volt = 3971, .cur = 168, .level = 80},
- { .volt = 3951, .cur = 168, .level = 75},
- { .volt = 3931, .cur = 170, .level = 70},
- { .volt = 3903, .cur = 172, .level = 65},
- { .volt = 3886, .cur = 172, .level = 60},
- { .volt = 3858, .cur = 176, .level = 55},
- { .volt = 3842, .cur = 176, .level = 50},
- { .volt = 3818, .cur = 176, .level = 45},
- { .volt = 3789, .cur = 180, .level = 40},
- { .volt = 3769, .cur = 180, .level = 35},
- { .volt = 3749, .cur = 184, .level = 30},
- { .volt = 3732, .cur = 184, .level = 25},
- { .volt = 3716, .cur = 184, .level = 20},
- { .volt = 3708, .cur = 184, .level = 15},
- { .volt = 3716, .cur = 96, .level = 10},
- { .volt = 3700, .cur = 96, .level = 5},
- { .volt = 3684, .cur = 96, .level = 0},
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
- { .volt = 4130, .cur = 0, .level = 100},
- { .volt = 3982, .cur = 0, .level = 50},
- { .volt = 3854, .cur = 0, .level = 10},
- { .volt = 3841, .cur = 0, .level = 0},
-};
-
-static int h1940_bat_init(void)
-{
- int ret;
-
- ret = gpio_request(H1940_LATCH_SM803_ENABLE, "h1940-charger-enable");
- if (ret)
- return ret;
- gpio_direction_output(H1940_LATCH_SM803_ENABLE, 0);
-
- return 0;
-
-}
-
-static void h1940_bat_exit(void)
-{
- gpio_free(H1940_LATCH_SM803_ENABLE);
-}
-
-static void h1940_enable_charger(void)
-{
- gpio_set_value(H1940_LATCH_SM803_ENABLE, 1);
-}
-
-static void h1940_disable_charger(void)
-{
- gpio_set_value(H1940_LATCH_SM803_ENABLE, 0);
-}
-
-static struct s3c_adc_bat_pdata h1940_bat_cfg = {
- .init = h1940_bat_init,
- .exit = h1940_bat_exit,
- .enable_charger = h1940_enable_charger,
- .disable_charger = h1940_disable_charger,
- .gpio_charge_finished = S3C2410_GPF(3),
- .gpio_inverted = 1,
- .lut_noac = bat_lut_noac,
- .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
- .lut_acin = bat_lut_acin,
- .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
- .volt_channel = 0,
- .current_channel = 1,
- .volt_mult = 4056,
- .current_mult = 1893,
- .internal_impedance = 200,
- .backup_volt_channel = 3,
- /* TODO Check backup volt multiplier */
- .backup_volt_mult = 4056,
- .backup_volt_min = 0,
- .backup_volt_max = 4149288
-};
-
-static struct platform_device h1940_battery = {
- .name = "s3c-adc-battery",
- .id = -1,
- .dev = {
- .parent = &s3c_device_adc.dev,
- .platform_data = &h1940_bat_cfg,
- },
-};
-
-static DEFINE_SPINLOCK(h1940_blink_spin);
-
-int h1940_led_blink_set(struct gpio_desc *desc, int state,
- unsigned long *delay_on, unsigned long *delay_off)
-{
- int blink_gpio, check_gpio1, check_gpio2;
- int gpio = desc ? desc_to_gpio(desc) : -EINVAL;
-
- switch (gpio) {
- case H1940_LATCH_LED_GREEN:
- blink_gpio = S3C2410_GPA(7);
- check_gpio1 = S3C2410_GPA(1);
- check_gpio2 = S3C2410_GPA(3);
- break;
- case H1940_LATCH_LED_RED:
- blink_gpio = S3C2410_GPA(1);
- check_gpio1 = S3C2410_GPA(7);
- check_gpio2 = S3C2410_GPA(3);
- break;
- default:
- blink_gpio = S3C2410_GPA(3);
- check_gpio1 = S3C2410_GPA(1);
- check_gpio2 = S3C2410_GPA(7);
- break;
- }
-
- if (delay_on && delay_off && !*delay_on && !*delay_off)
- *delay_on = *delay_off = 500;
-
- spin_lock(&h1940_blink_spin);
-
- switch (state) {
- case GPIO_LED_NO_BLINK_LOW:
- case GPIO_LED_NO_BLINK_HIGH:
- if (!gpio_get_value(check_gpio1) &&
- !gpio_get_value(check_gpio2))
- gpio_set_value(H1940_LATCH_LED_FLASH, 0);
- gpio_set_value(blink_gpio, 0);
- if (gpio_is_valid(gpio))
- gpio_set_value(gpio, state);
- break;
- case GPIO_LED_BLINK:
- if (gpio_is_valid(gpio))
- gpio_set_value(gpio, 0);
- gpio_set_value(H1940_LATCH_LED_FLASH, 1);
- gpio_set_value(blink_gpio, 1);
- break;
- }
-
- spin_unlock(&h1940_blink_spin);
-
- return 0;
-}
-EXPORT_SYMBOL(h1940_led_blink_set);
-
-static struct gpio_led h1940_leds_desc[] = {
- {
- .name = "Green",
- .default_trigger = "main-battery-full",
- .gpio = H1940_LATCH_LED_GREEN,
- .retain_state_suspended = 1,
- },
- {
- .name = "Red",
- .default_trigger
- = "main-battery-charging-blink-full-solid",
- .gpio = H1940_LATCH_LED_RED,
- .retain_state_suspended = 1,
- },
-};
-
-static struct gpio_led_platform_data h1940_leds_pdata = {
- .num_leds = ARRAY_SIZE(h1940_leds_desc),
- .leds = h1940_leds_desc,
- .gpio_blink_set = h1940_led_blink_set,
-};
-
-static struct platform_device h1940_device_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &h1940_leds_pdata,
- },
-};
-
-static struct platform_device h1940_device_bluetooth = {
- .name = "h1940-bt",
- .id = -1,
-};
-
-static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
-{
- s3c24xx_mci_def_set_power(power_mode, vdd);
-
- switch (power_mode) {
- case MMC_POWER_OFF:
- gpio_set_value(H1940_LATCH_SD_POWER, 0);
- break;
- case MMC_POWER_UP:
- case MMC_POWER_ON:
- gpio_set_value(H1940_LATCH_SD_POWER, 1);
- break;
- default:
- break;
- }
-}
-
-static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
- .set_power = h1940_set_mmc_power,
- .ocr_avail = MMC_VDD_32_33,
-};
-
-static struct gpiod_lookup_table h1940_mmc_gpio_table = {
- .dev_id = "s3c2410-sdi",
- .table = {
- /* Card detect S3C2410_GPF(5) */
- GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
- /* Write protect S3C2410_GPH(8) */
- GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
- /* bus pins */
- GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct gpiod_lookup_table h1940_audio_gpio_table = {
- .dev_id = "h1940-audio",
- .table = {
- GPIO_LOOKUP("H1940_LATCH",
- H1940_LATCH_AUDIO_POWER - H1940_LATCH_GPIO(0),
- "speaker-power", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPIOG", 4, "hp", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct platform_device h1940_audio = {
- .name = "h1940-audio",
- .id = -1,
-};
-
-static struct pwm_lookup h1940_pwm_lookup[] = {
- PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
- PWM_POLARITY_NORMAL),
-};
-
-static int h1940_backlight_init(struct device *dev)
-{
- gpio_request(S3C2410_GPB(0), "Backlight");
-
- gpio_direction_output(S3C2410_GPB(0), 0);
- s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
- gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
-
- return 0;
-}
-
-static int h1940_backlight_notify(struct device *dev, int brightness)
-{
- if (!brightness) {
- gpio_direction_output(S3C2410_GPB(0), 1);
- gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
- } else {
- gpio_direction_output(S3C2410_GPB(0), 0);
- s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
- gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
- }
- return brightness;
-}
-
-static void h1940_backlight_exit(struct device *dev)
-{
- gpio_direction_output(S3C2410_GPB(0), 1);
- gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
-}
-
-
-static struct platform_pwm_backlight_data backlight_data = {
- .max_brightness = 100,
- .dft_brightness = 50,
- .init = h1940_backlight_init,
- .notify = h1940_backlight_notify,
- .exit = h1940_backlight_exit,
-};
-
-static struct platform_device h1940_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &samsung_device_pwm.dev,
- .platform_data = &backlight_data,
- },
- .id = -1,
-};
-
-static void h1940_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- int value, retries = 100;
-
- if (!power) {
- gpio_set_value(S3C2410_GPC(0), 0);
- /* wait for 3ac */
- do {
- value = gpio_get_value(S3C2410_GPC(6));
- } while (value && retries--);
-
- gpio_set_value(H1940_LATCH_LCD_P2, 0);
- gpio_set_value(H1940_LATCH_LCD_P3, 0);
- gpio_set_value(H1940_LATCH_LCD_P4, 0);
-
- gpio_direction_output(S3C2410_GPC(1), 0);
- gpio_direction_output(S3C2410_GPC(4), 0);
-
- gpio_set_value(H1940_LATCH_LCD_P1, 0);
- gpio_set_value(H1940_LATCH_LCD_P0, 0);
-
- gpio_set_value(S3C2410_GPC(5), 0);
-
- } else {
- gpio_set_value(H1940_LATCH_LCD_P0, 1);
- gpio_set_value(H1940_LATCH_LCD_P1, 1);
-
- gpio_direction_input(S3C2410_GPC(1));
- gpio_direction_input(S3C2410_GPC(4));
- mdelay(10);
- s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
-
- gpio_set_value(S3C2410_GPC(5), 1);
- gpio_set_value(S3C2410_GPC(0), 1);
-
- gpio_set_value(H1940_LATCH_LCD_P3, 1);
- gpio_set_value(H1940_LATCH_LCD_P2, 1);
- gpio_set_value(H1940_LATCH_LCD_P4, 1);
- }
-}
-
-static struct plat_lcd_data h1940_lcd_power_data = {
- .set_power = h1940_lcd_power_set,
-};
-
-static struct platform_device h1940_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_lcd.dev,
- .dev.platform_data = &h1940_lcd_power_data,
-};
-
-static struct uda1380_platform_data uda1380_info = {
- .gpio_power = H1940_LATCH_UDA_POWER,
- .gpio_reset = S3C2410_GPA(12),
- .dac_clk = UDA1380_DAC_CLK_SYSCLK,
-};
-
-static struct i2c_board_info h1940_i2c_devices[] = {
- {
- I2C_BOARD_INFO("uda1380", 0x1a),
- .platform_data = &uda1380_info,
- },
-};
-
-#define DECLARE_BUTTON(p, k, n, w) \
- { \
- .gpio = p, \
- .code = k, \
- .desc = n, \
- .wakeup = w, \
- .active_low = 1, \
- }
-
-static struct gpio_keys_button h1940_buttons[] = {
- DECLARE_BUTTON(S3C2410_GPF(0), KEY_POWER, "Power", 1),
- DECLARE_BUTTON(S3C2410_GPF(6), KEY_ENTER, "Select", 1),
- DECLARE_BUTTON(S3C2410_GPF(7), KEY_RECORD, "Record", 0),
- DECLARE_BUTTON(S3C2410_GPG(0), KEY_F11, "Calendar", 0),
- DECLARE_BUTTON(S3C2410_GPG(2), KEY_F12, "Contacts", 0),
- DECLARE_BUTTON(S3C2410_GPG(3), KEY_MAIL, "Mail", 0),
- DECLARE_BUTTON(S3C2410_GPG(6), KEY_LEFT, "Left_arrow", 0),
- DECLARE_BUTTON(S3C2410_GPG(7), KEY_HOMEPAGE, "Home", 0),
- DECLARE_BUTTON(S3C2410_GPG(8), KEY_RIGHT, "Right_arrow", 0),
- DECLARE_BUTTON(S3C2410_GPG(9), KEY_UP, "Up_arrow", 0),
- DECLARE_BUTTON(S3C2410_GPG(10), KEY_DOWN, "Down_arrow", 0),
-};
-
-static struct gpio_keys_platform_data h1940_buttons_data = {
- .buttons = h1940_buttons,
- .nbuttons = ARRAY_SIZE(h1940_buttons),
-};
-
-static struct platform_device h1940_dev_buttons = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &h1940_buttons_data,
- }
-};
-
-static struct platform_device *h1940_devices[] __initdata = {
- &h1940_dev_buttons,
- &s3c_device_ohci,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_usbgadget,
- &h1940_device_leds,
- &h1940_device_bluetooth,
- &s3c_device_sdi,
- &s3c_device_rtc,
- &samsung_device_pwm,
- &h1940_backlight,
- &h1940_lcd_powerdev,
- &s3c_device_adc,
- &s3c_device_ts,
- &power_supply,
- &h1940_battery,
- &h1940_audio,
-};
-
-static void __init h1940_map_io(void)
-{
- s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
- s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-
- /* setup PM */
-
-#ifdef CONFIG_PM_H1940
- memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
-#endif
- s3c_pm_init();
-
- /* Add latch gpio chip, set latch initial value */
- h1940_latch_control(0, 0);
- WARN_ON(gpiochip_add_data(&h1940_latch_gpiochip, NULL));
-}
-
-static void __init h1940_init_time(void)
-{
- s3c2410_init_clocks(12000000);
- samsung_timer_init();
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init h1940_reserve(void)
-{
- memblock_reserve(0x30003000, 0x1000);
- memblock_reserve(0x30081000, 0x1000);
-}
-
-static void __init h1940_init(void)
-{
- u32 tmp;
-
- s3c24xx_fb_set_platdata(&h1940_fb_info);
- gpiod_add_lookup_table(&h1940_mmc_gpio_table);
- gpiod_add_lookup_table(&h1940_audio_gpio_table);
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
- s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
- s3c24xx_udc_set_platdata(&h1940_udc_cfg);
- s3c24xx_ts_set_platdata(&h1940_ts_cfg);
- s3c_i2c0_set_platdata(NULL);
-
- /* Turn off suspend on both USB ports, and switch the
- * selectable USB port to USB device mode. */
-
- s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
- S3C2410_MISCCR_USBSUSPND0 |
- S3C2410_MISCCR_USBSUSPND1, 0x0);
-
- tmp = (0x78 << S3C24XX_PLL_MDIV_SHIFT)
- | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
- | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
- writel(tmp, S3C2410_UPLLCON);
-
- gpio_request(S3C2410_GPC(0), "LCD power");
- gpio_request(S3C2410_GPC(1), "LCD power");
- gpio_request(S3C2410_GPC(4), "LCD power");
- gpio_request(S3C2410_GPC(5), "LCD power");
- gpio_request(S3C2410_GPC(6), "LCD power");
- gpio_request(H1940_LATCH_LCD_P0, "LCD power");
- gpio_request(H1940_LATCH_LCD_P1, "LCD power");
- gpio_request(H1940_LATCH_LCD_P2, "LCD power");
- gpio_request(H1940_LATCH_LCD_P3, "LCD power");
- gpio_request(H1940_LATCH_LCD_P4, "LCD power");
- gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
- gpio_direction_output(S3C2410_GPC(0), 0);
- gpio_direction_output(S3C2410_GPC(1), 0);
- gpio_direction_output(S3C2410_GPC(4), 0);
- gpio_direction_output(S3C2410_GPC(5), 0);
- gpio_direction_input(S3C2410_GPC(6));
- gpio_direction_output(H1940_LATCH_LCD_P0, 0);
- gpio_direction_output(H1940_LATCH_LCD_P1, 0);
- gpio_direction_output(H1940_LATCH_LCD_P2, 0);
- gpio_direction_output(H1940_LATCH_LCD_P3, 0);
- gpio_direction_output(H1940_LATCH_LCD_P4, 0);
- gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
-
- gpio_request(H1940_LATCH_SD_POWER, "SD power");
- gpio_direction_output(H1940_LATCH_SD_POWER, 0);
-
- pwm_add_table(h1940_pwm_lookup, ARRAY_SIZE(h1940_pwm_lookup));
- platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
-
- gpio_request(S3C2410_GPA(1), "Red LED blink");
- gpio_request(S3C2410_GPA(3), "Blue LED blink");
- gpio_request(S3C2410_GPA(7), "Green LED blink");
- gpio_request(H1940_LATCH_LED_FLASH, "LED blink");
- gpio_direction_output(S3C2410_GPA(1), 0);
- gpio_direction_output(S3C2410_GPA(3), 0);
- gpio_direction_output(S3C2410_GPA(7), 0);
- gpio_direction_output(H1940_LATCH_LED_FLASH, 0);
-
- i2c_register_board_info(0, h1940_i2c_devices,
- ARRAY_SIZE(h1940_i2c_devices));
-}
-
-MACHINE_START(H1940, "IPAQ-H1940")
- /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .atag_offset = 0x100,
- .map_io = h1940_map_io,
- .reserve = h1940_reserve,
- .init_irq = s3c2410_init_irq,
- .init_machine = h1940_init,
- .init_time = h1940_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2007 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// http://armlinux.simtec.co.uk/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-
-#include <video/ili9320.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/gpio-samsung.h>
-
-#include <asm/mach-types.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-
-#include "common.h"
-#include "s3c2412-power.h"
-
-static struct map_desc jive_iodesc[] __initdata = {
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg jive_uartcfgs[] = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- }
-};
-
-/* Jive flash assignment
- *
- * 0x00000000-0x00028000 : uboot
- * 0x00028000-0x0002c000 : uboot env
- * 0x0002c000-0x00030000 : spare
- * 0x00030000-0x00200000 : zimage A
- * 0x00200000-0x01600000 : cramfs A
- * 0x01600000-0x017d0000 : zimage B
- * 0x017d0000-0x02bd0000 : cramfs B
- * 0x02bd0000-0x03fd0000 : yaffs
- */
-static struct mtd_partition __initdata jive_imageA_nand_part[] = {
-
-#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
- /* Don't allow access to the bootloader from linux */
- {
- .name = "uboot",
- .offset = 0,
- .size = (160 * SZ_1K),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-
- /* spare */
- {
- .name = "spare",
- .offset = (176 * SZ_1K),
- .size = (16 * SZ_1K),
- },
-#endif
-
- /* booted images */
- {
- .name = "kernel (ro)",
- .offset = (192 * SZ_1K),
- .size = (SZ_2M) - (192 * SZ_1K),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- .name = "root (ro)",
- .offset = (SZ_2M),
- .size = (20 * SZ_1M),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-
- /* yaffs */
- {
- .name = "yaffs",
- .offset = (44 * SZ_1M),
- .size = (20 * SZ_1M),
- },
-
- /* bootloader environment */
- {
- .name = "env",
- .offset = (160 * SZ_1K),
- .size = (16 * SZ_1K),
- },
-
- /* upgrade images */
- {
- .name = "zimage",
- .offset = (22 * SZ_1M),
- .size = (2 * SZ_1M) - (192 * SZ_1K),
- }, {
- .name = "cramfs",
- .offset = (24 * SZ_1M) - (192*SZ_1K),
- .size = (20 * SZ_1M),
- },
-};
-
-static struct mtd_partition __initdata jive_imageB_nand_part[] = {
-
-#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
- /* Don't allow access to the bootloader from linux */
- {
- .name = "uboot",
- .offset = 0,
- .size = (160 * SZ_1K),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-
- /* spare */
- {
- .name = "spare",
- .offset = (176 * SZ_1K),
- .size = (16 * SZ_1K),
- },
-#endif
-
- /* booted images */
- {
- .name = "kernel (ro)",
- .offset = (22 * SZ_1M),
- .size = (2 * SZ_1M) - (192 * SZ_1K),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "root (ro)",
- .offset = (24 * SZ_1M) - (192 * SZ_1K),
- .size = (20 * SZ_1M),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-
- /* yaffs */
- {
- .name = "yaffs",
- .offset = (44 * SZ_1M),
- .size = (20 * SZ_1M),
- },
-
- /* bootloader environment */
- {
- .name = "env",
- .offset = (160 * SZ_1K),
- .size = (16 * SZ_1K),
- },
-
- /* upgrade images */
- {
- .name = "zimage",
- .offset = (192 * SZ_1K),
- .size = (2 * SZ_1M) - (192 * SZ_1K),
- }, {
- .name = "cramfs",
- .offset = (2 * SZ_1M),
- .size = (20 * SZ_1M),
- },
-};
-
-static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
- [0] = {
- .name = "flash",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(jive_imageA_nand_part),
- .partitions = jive_imageA_nand_part,
- },
-};
-
-static struct s3c2410_platform_nand __initdata jive_nand_info = {
- /* set taken from osiris nand timings, possibly still conservative */
- .tacls = 30,
- .twrph0 = 55,
- .twrph1 = 40,
- .sets = jive_nand_sets,
- .nr_sets = ARRAY_SIZE(jive_nand_sets),
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-static int __init jive_mtdset(char *options)
-{
- struct s3c2410_nand_set *nand = &jive_nand_sets[0];
- unsigned long set;
-
- if (options == NULL || options[0] == '\0')
- return 0;
-
- if (kstrtoul(options, 10, &set)) {
- printk(KERN_ERR "failed to parse mtdset=%s\n", options);
- return 0;
- }
-
- switch (set) {
- case 1:
- nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
- nand->partitions = jive_imageB_nand_part;
- case 0:
- /* this is already setup in the nand info */
- break;
- default:
- printk(KERN_ERR "Unknown mtd set %ld specified,"
- "using default.", set);
- }
-
- return 0;
-}
-
-/* parse the mtdset= option given to the kernel command line */
-__setup("mtdset=", jive_mtdset);
-
-/* LCD timing and setup */
-
-#define LCD_XRES (240)
-#define LCD_YRES (320)
-#define LCD_LEFT_MARGIN (12)
-#define LCD_RIGHT_MARGIN (12)
-#define LCD_LOWER_MARGIN (12)
-#define LCD_UPPER_MARGIN (12)
-#define LCD_VSYNC (2)
-#define LCD_HSYNC (2)
-
-#define LCD_REFRESH (60)
-
-#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
-#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
-
-static struct s3c2410fb_display jive_vgg2432a4_display[] = {
- [0] = {
- .width = LCD_XRES,
- .height = LCD_YRES,
- .xres = LCD_XRES,
- .yres = LCD_YRES,
- .left_margin = LCD_LEFT_MARGIN,
- .right_margin = LCD_RIGHT_MARGIN,
- .upper_margin = LCD_UPPER_MARGIN,
- .lower_margin = LCD_LOWER_MARGIN,
- .hsync_len = LCD_HSYNC,
- .vsync_len = LCD_VSYNC,
-
- .pixclock = (1000000000000LL /
- (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
-
- .bpp = 16,
- .type = (S3C2410_LCDCON1_TFT16BPP |
- S3C2410_LCDCON1_TFT),
-
- .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_INVVDEN |
- S3C2410_LCDCON5_PWREN),
- },
-};
-
-/* todo - put into gpio header */
-
-#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
-#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
-
-static struct s3c2410fb_mach_info jive_lcd_config = {
- .displays = jive_vgg2432a4_display,
- .num_displays = ARRAY_SIZE(jive_vgg2432a4_display),
- .default_display = 0,
-
- /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
- * and disable the pull down resistors on pins we are using for LCD
- * data. */
-
- .gpcup = (0xf << 1) | (0x3f << 10),
- .gpcup_reg = S3C2410_GPCUP,
-
- .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
- S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
- S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 |
- S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 |
- S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7),
-
- .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) |
- S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) |
- S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
- S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
- S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
-
- .gpccon_reg = S3C2410_GPCCON,
-
- .gpdup = (0x3f << 2) | (0x3f << 10),
-
- .gpdup_reg = S3C2410_GPDUP,
-
- .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
- S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
- S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
- S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
- S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
- S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
-
- .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) |
- S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) |
- S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) |
- S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
- S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
- S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
-
- .gpdcon_reg = S3C2410_GPDCON,
-};
-
-/* ILI9320 support. */
-
-static void jive_lcm_reset(unsigned int set)
-{
- printk(KERN_DEBUG "%s(%d)\n", __func__, set);
-
- gpio_set_value(S3C2410_GPG(13), set);
-}
-
-#undef LCD_UPPER_MARGIN
-#define LCD_UPPER_MARGIN 2
-
-static struct ili9320_platdata jive_lcm_config = {
- .hsize = LCD_XRES,
- .vsize = LCD_YRES,
-
- .reset = jive_lcm_reset,
- .suspend = ILI9320_SUSPEND_DEEP,
-
- .entry_mode = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
- .display2 = (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
- ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
- .display3 = 0x0,
- .display4 = 0x0,
- .rgb_if1 = (ILI9320_RGBIF1_RIM_RGB18 |
- ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
- .rgb_if2 = ILI9320_RGBIF2_DPL,
- .interface2 = 0x0,
- .interface3 = 0x3,
- .interface4 = (ILI9320_INTERFACE4_RTNE(16) |
- ILI9320_INTERFACE4_DIVE(1)),
- .interface5 = 0x0,
- .interface6 = 0x0,
-};
-
-/* LCD SPI support */
-
-static struct spi_gpio_platform_data jive_lcd_spi = {
- .num_chipselect = 1,
-};
-
-static struct platform_device jive_device_lcdspi = {
- .name = "spi_gpio",
- .id = 1,
- .dev.platform_data = &jive_lcd_spi,
-};
-
-static struct gpiod_lookup_table jive_lcdspi_gpiod_table = {
- .dev_id = "spi_gpio",
- .table = {
- GPIO_LOOKUP("GPIOG", 8,
- "sck", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPIOB", 8,
- "mosi", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPIOB", 7,
- "cs", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-/* WM8750 audio code SPI definition */
-
-static struct spi_gpio_platform_data jive_wm8750_spi = {
- .num_chipselect = 1,
-};
-
-static struct platform_device jive_device_wm8750 = {
- .name = "spi_gpio",
- .id = 2,
- .dev.platform_data = &jive_wm8750_spi,
-};
-
-static struct gpiod_lookup_table jive_wm8750_gpiod_table = {
- .dev_id = "spi_gpio",
- .table = {
- GPIO_LOOKUP("GPIOB", 4,
- "sck", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPIOB", 9,
- "mosi", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPIOH", 10,
- "cs", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-/* JIVE SPI devices. */
-
-static struct spi_board_info __initdata jive_spi_devs[] = {
- [0] = {
- .modalias = "VGG2432A4",
- .bus_num = 1,
- .chip_select = 0,
- .mode = SPI_MODE_3, /* CPOL=1, CPHA=1 */
- .max_speed_hz = 100000,
- .platform_data = &jive_lcm_config,
- }, {
- .modalias = "WM8750",
- .bus_num = 2,
- .chip_select = 0,
- .mode = SPI_MODE_0, /* CPOL=0, CPHA=0 */
- .max_speed_hz = 100000,
- },
-};
-
-/* I2C bus and device configuration. */
-
-static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
- .frequency = 80 * 1000,
- .flags = S3C_IICFLG_FILTER,
- .sda_delay = 2,
-};
-
-static struct i2c_board_info jive_i2c_devs[] __initdata = {
- [0] = {
- I2C_BOARD_INFO("lis302dl", 0x1c),
- .irq = IRQ_EINT14,
- },
-};
-
-/* The platform devices being used. */
-
-static struct platform_device *jive_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_rtc,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_lcd,
- &jive_device_lcdspi,
- &jive_device_wm8750,
- &s3c_device_nand,
- &s3c_device_usbgadget,
- &s3c2412_device_dma,
-};
-
-static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */
-};
-
-/* Jive power management device */
-
-#ifdef CONFIG_PM
-static int jive_pm_suspend(void)
-{
- /* Write the magic value u-boot uses to check for resume into
- * the INFORM0 register, and ensure INFORM1 is set to the
- * correct address to resume from. */
-
- __raw_writel(0x2BED, S3C2412_INFORM0);
- __raw_writel(__pa_symbol(s3c_cpu_resume), S3C2412_INFORM1);
-
- return 0;
-}
-
-static void jive_pm_resume(void)
-{
- __raw_writel(0x0, S3C2412_INFORM0);
-}
-
-#else
-#define jive_pm_suspend NULL
-#define jive_pm_resume NULL
-#endif
-
-static struct syscore_ops jive_pm_syscore_ops = {
- .suspend = jive_pm_suspend,
- .resume = jive_pm_resume,
-};
-
-static void __init jive_map_io(void)
-{
- s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
- s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init jive_init_time(void)
-{
- s3c2412_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void jive_power_off(void)
-{
- printk(KERN_INFO "powering system down...\n");
-
- gpio_request_one(S3C2410_GPC(5), GPIOF_OUT_INIT_HIGH, NULL);
- gpio_free(S3C2410_GPC(5));
-}
-
-static void __init jive_machine_init(void)
-{
- /* register system core operations for managing low level suspend */
-
- register_syscore_ops(&jive_pm_syscore_ops);
-
- /* write our sleep configurations for the IO. Pull down all unused
- * IO, ensure that we have turned off all peripherals we do not
- * need, and configure the ones we do need. */
-
- /* Port B sleep */
-
- __raw_writel(S3C2412_SLPCON_IN(0) |
- S3C2412_SLPCON_PULL(1) |
- S3C2412_SLPCON_HIGH(2) |
- S3C2412_SLPCON_PULL(3) |
- S3C2412_SLPCON_PULL(4) |
- S3C2412_SLPCON_PULL(5) |
- S3C2412_SLPCON_PULL(6) |
- S3C2412_SLPCON_HIGH(7) |
- S3C2412_SLPCON_PULL(8) |
- S3C2412_SLPCON_PULL(9) |
- S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
-
- /* Port C sleep */
-
- __raw_writel(S3C2412_SLPCON_PULL(0) |
- S3C2412_SLPCON_PULL(1) |
- S3C2412_SLPCON_PULL(2) |
- S3C2412_SLPCON_PULL(3) |
- S3C2412_SLPCON_PULL(4) |
- S3C2412_SLPCON_PULL(5) |
- S3C2412_SLPCON_LOW(6) |
- S3C2412_SLPCON_PULL(6) |
- S3C2412_SLPCON_PULL(7) |
- S3C2412_SLPCON_PULL(8) |
- S3C2412_SLPCON_PULL(9) |
- S3C2412_SLPCON_PULL(10) |
- S3C2412_SLPCON_PULL(11) |
- S3C2412_SLPCON_PULL(12) |
- S3C2412_SLPCON_PULL(13) |
- S3C2412_SLPCON_PULL(14) |
- S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
-
- /* Port D sleep */
-
- __raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
-
- /* Port F sleep */
-
- __raw_writel(S3C2412_SLPCON_LOW(0) |
- S3C2412_SLPCON_LOW(1) |
- S3C2412_SLPCON_LOW(2) |
- S3C2412_SLPCON_EINT(3) |
- S3C2412_SLPCON_EINT(4) |
- S3C2412_SLPCON_EINT(5) |
- S3C2412_SLPCON_EINT(6) |
- S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
-
- /* Port G sleep */
-
- __raw_writel(S3C2412_SLPCON_IN(0) |
- S3C2412_SLPCON_IN(1) |
- S3C2412_SLPCON_IN(2) |
- S3C2412_SLPCON_IN(3) |
- S3C2412_SLPCON_IN(4) |
- S3C2412_SLPCON_IN(5) |
- S3C2412_SLPCON_IN(6) |
- S3C2412_SLPCON_IN(7) |
- S3C2412_SLPCON_PULL(8) |
- S3C2412_SLPCON_PULL(9) |
- S3C2412_SLPCON_IN(10) |
- S3C2412_SLPCON_PULL(11) |
- S3C2412_SLPCON_PULL(12) |
- S3C2412_SLPCON_PULL(13) |
- S3C2412_SLPCON_IN(14) |
- S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
-
- /* Port H sleep */
-
- __raw_writel(S3C2412_SLPCON_PULL(0) |
- S3C2412_SLPCON_PULL(1) |
- S3C2412_SLPCON_PULL(2) |
- S3C2412_SLPCON_PULL(3) |
- S3C2412_SLPCON_PULL(4) |
- S3C2412_SLPCON_PULL(5) |
- S3C2412_SLPCON_PULL(6) |
- S3C2412_SLPCON_IN(7) |
- S3C2412_SLPCON_IN(8) |
- S3C2412_SLPCON_PULL(9) |
- S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
-
- /* initialise the power management now we've setup everything. */
-
- s3c_pm_init();
-
- /** TODO - check that this is after the cmdline option! */
- s3c_nand_set_platdata(&jive_nand_info);
-
- gpio_request(S3C2410_GPG(13), "lcm reset");
- gpio_direction_output(S3C2410_GPG(13), 0);
-
- gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL);
- gpio_free(S3C2410_GPB(6));
-
- /* Turn off suspend on both USB ports, and switch the
- * selectable USB port to USB device mode. */
-
- s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
- S3C2410_MISCCR_USBSUSPND0 |
- S3C2410_MISCCR_USBSUSPND1, 0x0);
-
- s3c24xx_udc_set_platdata(&jive_udc_cfg);
- s3c24xx_fb_set_platdata(&jive_lcd_config);
-
- spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
-
- s3c_i2c0_set_platdata(&jive_i2c_cfg);
- i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
-
- pm_power_off = jive_power_off;
-
- gpiod_add_lookup_table(&jive_lcdspi_gpiod_table);
- gpiod_add_lookup_table(&jive_wm8750_gpiod_table);
- platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
-}
-
-MACHINE_START(JIVE, "JIVE")
- /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .atag_offset = 0x100,
-
- .init_irq = s3c2412_init_irq,
- .map_io = jive_map_io,
- .init_machine = jive_machine_init,
- .init_time = jive_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
-// Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
-// and modifications by SBZ <sbz@spgui.org> and
-// Weibing <http://weibing.blogbus.com> and
-// Michel Pollet <buserror@gmail.com>
-//
-// For product information, visit https://code.google.com/p/mini2440/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/dm9000.h>
-#include <linux/property.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/mmc/host.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/irqs.h>
-#include <mach/gpio-samsung.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <sound/s3c24xx_uda134x.h>
-
-#include "common.h"
-
-#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
-
-static struct map_desc mini2440_iodesc[] __initdata = {
- /* nothing to declare, move along */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-
-static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-/* USB device UDC support */
-
-static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
- .pullup_pin = S3C2410_GPC(5),
-};
-
-
-/* LCD timing and setup */
-
-/*
- * This macro simplifies the table bellow
- */
-#define _LCD_DECLARE(_clock, _xres, margin_left, margin_right, hsync, \
- _yres, margin_top, margin_bottom, vsync, refresh) \
- .width = _xres, \
- .xres = _xres, \
- .height = _yres, \
- .yres = _yres, \
- .left_margin = margin_left, \
- .right_margin = margin_right, \
- .upper_margin = margin_top, \
- .lower_margin = margin_bottom, \
- .hsync_len = hsync, \
- .vsync_len = vsync, \
- .pixclock = ((_clock*100000000000LL) / \
- ((refresh) * \
- (hsync + margin_left + _xres + margin_right) * \
- (vsync + margin_top + _yres + margin_bottom))), \
- .bpp = 16,\
- .type = (S3C2410_LCDCON1_TFT16BPP |\
- S3C2410_LCDCON1_TFT)
-
-static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
- [0] = { /* mini2440 + 3.5" TFT + touchscreen */
- _LCD_DECLARE(
- 7, /* The 3.5 is quite fast */
- 240, 21, 38, 6, /* x timing */
- 320, 4, 4, 2, /* y timing */
- 60), /* refresh rate */
- .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_INVVDEN |
- S3C2410_LCDCON5_PWREN),
- },
- [1] = { /* mini2440 + 7" TFT + touchscreen */
- _LCD_DECLARE(
- 10, /* the 7" runs slower */
- 800, 40, 40, 48, /* x timing */
- 480, 29, 3, 3, /* y timing */
- 50), /* refresh rate */
- .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_PWREN),
- },
- /* The VGA shield can outout at several resolutions. All share
- * the same timings, however, anything smaller than 1024x768
- * will only be displayed in the top left corner of a 1024x768
- * XGA output unless you add optional dip switches to the shield.
- * Therefore timings for other resolutions have been omitted here.
- */
- [2] = {
- _LCD_DECLARE(
- 10,
- 1024, 1, 2, 2, /* y timing */
- 768, 200, 16, 16, /* x timing */
- 24), /* refresh rate, maximum stable,
- * tested with the FPGA shield
- */
- .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_HWSWP),
- },
- /* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/
- [3] = {
- _LCD_DECLARE(
- /* clock */
- 7,
- /* xres, margin_right, margin_left, hsync */
- 320, 68, 66, 4,
- /* yres, margin_top, margin_bottom, vsync */
- 240, 4, 4, 9,
- /* refresh rate */
- 60),
- .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVDEN |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVCLK |
- S3C2410_LCDCON5_HWSWP),
- },
-};
-
-/* todo - put into gpio header */
-
-#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
-#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
-
-static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
- .displays = &mini2440_lcd_cfg[0], /* not constant! see init */
- .num_displays = 1,
- .default_display = 0,
-
- /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
- * and disable the pull down resistors on pins we are using for LCD
- * data.
- */
-
- .gpcup = (0xf << 1) | (0x3f << 10),
-
- .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
- S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
- S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 |
- S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 |
- S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7),
-
- .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) |
- S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) |
- S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
- S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
- S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
-
- .gpccon_reg = S3C2410_GPCCON,
- .gpcup_reg = S3C2410_GPCUP,
-
- .gpdup = (0x3f << 2) | (0x3f << 10),
-
- .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
- S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
- S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
- S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
- S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
- S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
-
- .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) |
- S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) |
- S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) |
- S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
- S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
- S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
-
- .gpdcon_reg = S3C2410_GPDCON,
- .gpdup_reg = S3C2410_GPDUP,
-};
-
-/* MMC/SD */
-
-static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
- .wprotect_invert = 1,
- .set_power = s3c24xx_mci_def_set_power,
- .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table mini2440_mmc_gpio_table = {
- .dev_id = "s3c2410-sdi",
- .table = {
- /* Card detect S3C2410_GPG(8) */
- GPIO_LOOKUP("GPIOG", 8, "cd", GPIO_ACTIVE_LOW),
- /* Write protect S3C2410_GPH(8) */
- GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_HIGH),
- /* bus pins */
- GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-/* NAND Flash on MINI2440 board */
-
-static struct mtd_partition mini2440_default_nand_part[] __initdata = {
- [0] = {
- .name = "u-boot",
- .size = SZ_256K,
- .offset = 0,
- },
- [1] = {
- .name = "u-boot-env",
- .size = SZ_128K,
- .offset = SZ_256K,
- },
- [2] = {
- .name = "kernel",
- /* 5 megabytes, for a kernel with no modules
- * or a uImage with a ramdisk attached
- */
- .size = 0x00500000,
- .offset = SZ_256K + SZ_128K,
- },
- [3] = {
- .name = "root",
- .offset = SZ_256K + SZ_128K + 0x00500000,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
- [0] = {
- .name = "nand",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
- .partitions = mini2440_default_nand_part,
- .flash_bbt = 1, /* we use u-boot to create a BBT */
- },
-};
-
-static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
- .tacls = 0,
- .twrph0 = 25,
- .twrph1 = 15,
- .nr_sets = ARRAY_SIZE(mini2440_nand_sets),
- .sets = mini2440_nand_sets,
- .ignore_unset_ecc = 1,
- .ecc_mode = NAND_ECC_HW,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource mini2440_dm9k_resource[] = {
- [0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4),
- [1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4),
- [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ
- | IORESOURCE_IRQ_HIGHEDGE),
-};
-
-/*
- * The DM9000 has no eeprom, and it's MAC address is set by
- * the bootloader before starting the kernel.
- */
-static struct dm9000_plat_data mini2440_dm9k_pdata = {
- .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device mini2440_device_eth = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(mini2440_dm9k_resource),
- .resource = mini2440_dm9k_resource,
- .dev = {
- .platform_data = &mini2440_dm9k_pdata,
- },
-};
-
-/* CON5
- * +--+ /-----\
- * | | | |
- * | | | BAT |
- * | | \_____/
- * | |
- * | | +----+ +----+
- * | | | K5 | | K1 |
- * | | +----+ +----+
- * | | +----+ +----+
- * | | | K4 | | K2 |
- * | | +----+ +----+
- * | | +----+ +----+
- * | | | K6 | | K3 |
- * | | +----+ +----+
- * .....
- */
-static struct gpio_keys_button mini2440_buttons[] = {
- {
- .gpio = S3C2410_GPG(0), /* K1 */
- .code = KEY_F1,
- .desc = "Button 1",
- .active_low = 1,
- },
- {
- .gpio = S3C2410_GPG(3), /* K2 */
- .code = KEY_F2,
- .desc = "Button 2",
- .active_low = 1,
- },
- {
- .gpio = S3C2410_GPG(5), /* K3 */
- .code = KEY_F3,
- .desc = "Button 3",
- .active_low = 1,
- },
- {
- .gpio = S3C2410_GPG(6), /* K4 */
- .code = KEY_POWER,
- .desc = "Power",
- .active_low = 1,
- },
- {
- .gpio = S3C2410_GPG(7), /* K5 */
- .code = KEY_F5,
- .desc = "Button 5",
- .active_low = 1,
- },
-#if 0
- /* this pin is also known as TCLK1 and seems to already
- * marked as "in use" somehow in the kernel -- possibly wrongly
- */
- {
- .gpio = S3C2410_GPG(11), /* K6 */
- .code = KEY_F6,
- .desc = "Button 6",
- .active_low = 1,
- },
-#endif
-};
-
-static struct gpio_keys_platform_data mini2440_button_data = {
- .buttons = mini2440_buttons,
- .nbuttons = ARRAY_SIZE(mini2440_buttons),
-};
-
-static struct platform_device mini2440_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &mini2440_button_data,
- }
-};
-
-/* LEDS */
-
-static struct gpiod_lookup_table mini2440_led1_gpio_table = {
- .dev_id = "s3c24xx_led.1",
- .table = {
- GPIO_LOOKUP("GPB", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
- { },
- },
-};
-
-static struct gpiod_lookup_table mini2440_led2_gpio_table = {
- .dev_id = "s3c24xx_led.2",
- .table = {
- GPIO_LOOKUP("GPB", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
- { },
- },
-};
-
-static struct gpiod_lookup_table mini2440_led3_gpio_table = {
- .dev_id = "s3c24xx_led.3",
- .table = {
- GPIO_LOOKUP("GPB", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
- { },
- },
-};
-
-static struct gpiod_lookup_table mini2440_led4_gpio_table = {
- .dev_id = "s3c24xx_led.4",
- .table = {
- GPIO_LOOKUP("GPB", 8, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
- { },
- },
-};
-
-static struct gpiod_lookup_table mini2440_backlight_gpio_table = {
- .dev_id = "s3c24xx_led.5",
- .table = {
- GPIO_LOOKUP("GPG", 4, NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct s3c24xx_led_platdata mini2440_led1_pdata = {
- .name = "led1",
- .def_trigger = "heartbeat",
-};
-
-static struct s3c24xx_led_platdata mini2440_led2_pdata = {
- .name = "led2",
- .def_trigger = "nand-disk",
-};
-
-static struct s3c24xx_led_platdata mini2440_led3_pdata = {
- .name = "led3",
- .def_trigger = "mmc0",
-};
-
-static struct s3c24xx_led_platdata mini2440_led4_pdata = {
- .name = "led4",
- .def_trigger = "",
-};
-
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
- .name = "backlight",
- .def_trigger = "backlight",
-};
-
-static struct platform_device mini2440_led1 = {
- .name = "s3c24xx_led",
- .id = 1,
- .dev = {
- .platform_data = &mini2440_led1_pdata,
- },
-};
-
-static struct platform_device mini2440_led2 = {
- .name = "s3c24xx_led",
- .id = 2,
- .dev = {
- .platform_data = &mini2440_led2_pdata,
- },
-};
-
-static struct platform_device mini2440_led3 = {
- .name = "s3c24xx_led",
- .id = 3,
- .dev = {
- .platform_data = &mini2440_led3_pdata,
- },
-};
-
-static struct platform_device mini2440_led4 = {
- .name = "s3c24xx_led",
- .id = 4,
- .dev = {
- .platform_data = &mini2440_led4_pdata,
- },
-};
-
-static struct platform_device mini2440_led_backlight = {
- .name = "s3c24xx_led",
- .id = 5,
- .dev = {
- .platform_data = &mini2440_led_backlight_pdata,
- },
-};
-
-/* AUDIO */
-
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
- .l3_clk = S3C2410_GPB(4),
- .l3_mode = S3C2410_GPB(2),
- .l3_data = S3C2410_GPB(3),
- .model = UDA134X_UDA1341
-};
-
-static struct platform_device mini2440_audio = {
- .name = "s3c24xx_uda134x",
- .id = 0,
- .dev = {
- .platform_data = &mini2440_audio_pins,
- },
-};
-
-/*
- * I2C devices
- */
-static const struct property_entry mini2440_at24_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 16),
- { }
-};
-
-static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("24c08", 0x50),
- .properties = mini2440_at24_properties,
- },
-};
-
-static struct uda134x_platform_data s3c24xx_uda134x = {
- .l3 = {
- .gpio_clk = S3C2410_GPB(4),
- .gpio_data = S3C2410_GPB(3),
- .gpio_mode = S3C2410_GPB(2),
- .use_gpios = 1,
- .data_hold = 1,
- .data_setup = 1,
- .clock_high = 1,
- .mode_hold = 1,
- .mode = 1,
- .mode_setup = 1,
- },
- .model = UDA134X_UDA1341,
-};
-
-static struct platform_device uda1340_codec = {
- .name = "uda134x-codec",
- .id = -1,
- .dev = {
- .platform_data = &s3c24xx_uda134x,
- },
-};
-
-static struct platform_device *mini2440_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_rtc,
- &s3c_device_usbgadget,
- &mini2440_device_eth,
- &mini2440_led1,
- &mini2440_led2,
- &mini2440_led3,
- &mini2440_led4,
- &mini2440_button_device,
- &s3c_device_nand,
- &s3c_device_sdi,
- &s3c2440_device_dma,
- &s3c_device_iis,
- &uda1340_codec,
- &mini2440_audio,
-};
-
-static void __init mini2440_map_io(void)
-{
- s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
- s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init mini2440_init_time(void)
-{
- s3c2440_init_clocks(12000000);
- samsung_timer_init();
-}
-
-/*
- * mini2440_features string
- *
- * t = Touchscreen present
- * b = backlight control
- * c = camera [TODO]
- * 0-9 LCD configuration
- *
- */
-static char mini2440_features_str[12] __initdata = "0tb";
-
-static int __init mini2440_features_setup(char *str)
-{
- if (str)
- strlcpy(mini2440_features_str, str,
- sizeof(mini2440_features_str));
- return 1;
-}
-
-__setup("mini2440=", mini2440_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-#define FEATURE_BACKLIGHT (1 << 1)
-#define FEATURE_TOUCH (1 << 2)
-#define FEATURE_CAMERA (1 << 3)
-
-struct mini2440_features_t {
- int count;
- int done;
- int lcd_index;
- struct platform_device *optional[8];
-};
-
-static void __init mini2440_parse_features(
- struct mini2440_features_t *features,
- const char *features_str)
-{
- const char *fp = features_str;
-
- features->count = 0;
- features->done = 0;
- features->lcd_index = -1;
-
- while (*fp) {
- char f = *fp++;
-
- switch (f) {
- case '0'...'9': /* tft screen */
- if (features->done & FEATURE_SCREEN) {
- pr_info("MINI2440: '%c' ignored, screen type already set\n",
- f);
- } else {
- int li = f - '0';
-
- if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
- pr_info("MINI2440: '%c' out of range LCD mode\n",
- f);
- else {
- features->optional[features->count++] =
- &s3c_device_lcd;
- features->lcd_index = li;
- }
- }
- features->done |= FEATURE_SCREEN;
- break;
- case 'b':
- if (features->done & FEATURE_BACKLIGHT)
- pr_info("MINI2440: '%c' ignored, backlight already set\n",
- f);
- else {
- features->optional[features->count++] =
- &mini2440_led_backlight;
- }
- features->done |= FEATURE_BACKLIGHT;
- break;
- case 't':
- pr_info("MINI2440: '%c' ignored, touchscreen not compiled in\n",
- f);
- break;
- case 'c':
- if (features->done & FEATURE_CAMERA)
- pr_info("MINI2440: '%c' ignored, camera already registered\n",
- f);
- else
- features->optional[features->count++] =
- &s3c_device_camif;
- features->done |= FEATURE_CAMERA;
- break;
- }
- }
-}
-
-static void __init mini2440_init(void)
-{
- struct mini2440_features_t features = { 0 };
- int i;
-
- pr_info("MINI2440: Option string mini2440=%s\n",
- mini2440_features_str);
-
- /* Parse the feature string */
- mini2440_parse_features(&features, mini2440_features_str);
-
- /* turn LCD on */
- s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
-
- /* Turn the backlight early on */
- WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL));
- gpio_free(S3C2410_GPG(4));
-
- /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
- gpio_request_one(S3C2410_GPB(1), GPIOF_IN, NULL);
- s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
- gpio_free(S3C2410_GPB(1));
-
- /* mark the key as input, without pullups (there is one on the board) */
- for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
- s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
- }
-
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
- if (features.lcd_index != -1) {
- int li;
-
- mini2440_fb_info.displays =
- &mini2440_lcd_cfg[features.lcd_index];
-
- pr_info("MINI2440: LCD");
- for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
- if (li == features.lcd_index)
- pr_cont(" [%d:%dx%d]", li,
- mini2440_lcd_cfg[li].width,
- mini2440_lcd_cfg[li].height);
- else
- pr_cont(" %d:%dx%d", li,
- mini2440_lcd_cfg[li].width,
- mini2440_lcd_cfg[li].height);
- pr_cont("\n");
- s3c24xx_fb_set_platdata(&mini2440_fb_info);
- }
-
- s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
- gpiod_add_lookup_table(&mini2440_mmc_gpio_table);
- s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
- s3c_nand_set_platdata(&mini2440_nand_info);
- s3c_i2c0_set_platdata(NULL);
-
- i2c_register_board_info(0, mini2440_i2c_devs,
- ARRAY_SIZE(mini2440_i2c_devs));
-
- /* Disable pull-up on the LED lines */
- s3c_gpio_setpull(S3C2410_GPB(5), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPB(6), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPB(7), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPB(8), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPG(4), S3C_GPIO_PULL_NONE);
-
- /* Add lookups for the lines */
- gpiod_add_lookup_table(&mini2440_led1_gpio_table);
- gpiod_add_lookup_table(&mini2440_led2_gpio_table);
- gpiod_add_lookup_table(&mini2440_led3_gpio_table);
- gpiod_add_lookup_table(&mini2440_led4_gpio_table);
- gpiod_add_lookup_table(&mini2440_backlight_gpio_table);
-
- platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
-
- if (features.count) /* the optional features */
- platform_add_devices(features.optional, features.count);
-
-}
-
-
-MACHINE_START(MINI2440, "MINI2440")
- /* Maintainer: Michel Pollet <buserror@gmail.com> */
- .atag_offset = 0x100,
- .map_io = mini2440_map_io,
- .init_machine = mini2440_init,
- .init_irq = s3c2440_init_irq,
- .init_time = mini2440_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Machine specific code for the Acer n30, Acer N35, Navman PiN 570,
-// Yakumo AlphaX and Airis NC05 PDAs.
-//
-// Copyright (c) 2003-2005 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se>
-//
-// There is a wiki with more information about the n30 port at
-// https://handhelds.org/moin/moin.cgi/AcerN30Documentation .
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <linux/gpio_keys.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-
-#include "common.h"
-
-static struct map_desc n30_iodesc[] __initdata = {
- /* nothing here yet */
-};
-
-static struct s3c2410_uartcfg n30_uartcfgs[] = {
- /* Normal serial port */
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x2c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- /* IR port */
- [1] = {
- .hwport = 1,
- .flags = 0,
- .uart_flags = UPF_CONS_FLOW,
- .ucon = 0x2c5,
- .ulcon = 0x43,
- .ufcon = 0x51,
- },
- /* On the N30 the bluetooth controller is connected here.
- * On the N35 and variants the GPS receiver is connected here. */
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = 0x2c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
-};
-
-static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG(1),
- .vbus_pin_inverted = 0,
- .pullup_pin = S3C2410_GPB(3),
-};
-
-static struct gpio_keys_button n30_buttons[] = {
- {
- .gpio = S3C2410_GPF(0),
- .code = KEY_POWER,
- .desc = "Power",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPG(9),
- .code = KEY_UP,
- .desc = "Thumbwheel Up",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPG(8),
- .code = KEY_DOWN,
- .desc = "Thumbwheel Down",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPG(7),
- .code = KEY_ENTER,
- .desc = "Thumbwheel Press",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPF(7),
- .code = KEY_HOMEPAGE,
- .desc = "Home",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPF(6),
- .code = KEY_CALENDAR,
- .desc = "Calendar",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPF(5),
- .code = KEY_ADDRESSBOOK,
- .desc = "Contacts",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPF(4),
- .code = KEY_MAIL,
- .desc = "Mail",
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_platform_data n30_button_data = {
- .buttons = n30_buttons,
- .nbuttons = ARRAY_SIZE(n30_buttons),
-};
-
-static struct platform_device n30_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &n30_button_data,
- }
-};
-
-static struct gpio_keys_button n35_buttons[] = {
- {
- .gpio = S3C2410_GPF(0),
- .code = KEY_POWER,
- .type = EV_PWR,
- .desc = "Power",
- .active_low = 0,
- .wakeup = 1,
- },
- {
- .gpio = S3C2410_GPG(9),
- .code = KEY_UP,
- .desc = "Joystick Up",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPG(8),
- .code = KEY_DOWN,
- .desc = "Joystick Down",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPG(6),
- .code = KEY_DOWN,
- .desc = "Joystick Left",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPG(5),
- .code = KEY_DOWN,
- .desc = "Joystick Right",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPG(7),
- .code = KEY_ENTER,
- .desc = "Joystick Press",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPF(7),
- .code = KEY_HOMEPAGE,
- .desc = "Home",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPF(6),
- .code = KEY_CALENDAR,
- .desc = "Calendar",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPF(5),
- .code = KEY_ADDRESSBOOK,
- .desc = "Contacts",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPF(4),
- .code = KEY_MAIL,
- .desc = "Mail",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPF(3),
- .code = SW_RADIO,
- .desc = "GPS Antenna",
- .active_low = 0,
- },
- {
- .gpio = S3C2410_GPG(2),
- .code = SW_HEADPHONE_INSERT,
- .desc = "Headphone",
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_platform_data n35_button_data = {
- .buttons = n35_buttons,
- .nbuttons = ARRAY_SIZE(n35_buttons),
-};
-
-static struct platform_device n35_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &n35_button_data,
- }
-};
-
-/* This is the bluetooth LED on the device. */
-
-static struct gpiod_lookup_table n30_blue_led_gpio_table = {
- .dev_id = "s3c24xx_led.1",
- .table = {
- GPIO_LOOKUP("GPG", 6, NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct s3c24xx_led_platdata n30_blue_led_pdata = {
- .name = "blue_led",
- .def_trigger = "",
-};
-
-/* This is the blue LED on the device. Originally used to indicate GPS activity
- * by flashing. */
-
-static struct gpiod_lookup_table n35_blue_led_gpio_table = {
- .dev_id = "s3c24xx_led.1",
- .table = {
- GPIO_LOOKUP("GPD", 8, NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct s3c24xx_led_platdata n35_blue_led_pdata = {
- .name = "blue_led",
- .def_trigger = "",
-};
-
-/* This LED is driven by the battery microcontroller, and is blinking
- * red, blinking green or solid green when the battery is low,
- * charging or full respectively. By driving GPD9 low, it's possible
- * to force the LED to blink red, so call that warning LED. */
-
-static struct gpiod_lookup_table n30_warning_led_gpio_table = {
- .dev_id = "s3c24xx_led.2",
- .table = {
- GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct s3c24xx_led_platdata n30_warning_led_pdata = {
- .name = "warning_led",
- .def_trigger = "",
-};
-
-static struct gpiod_lookup_table n35_warning_led_gpio_table = {
- .dev_id = "s3c24xx_led.2",
- .table = {
- GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
- { },
- },
-};
-
-static struct s3c24xx_led_platdata n35_warning_led_pdata = {
- .name = "warning_led",
- .def_trigger = "",
-};
-
-static struct platform_device n30_blue_led = {
- .name = "s3c24xx_led",
- .id = 1,
- .dev = {
- .platform_data = &n30_blue_led_pdata,
- },
-};
-
-static struct platform_device n35_blue_led = {
- .name = "s3c24xx_led",
- .id = 1,
- .dev = {
- .platform_data = &n35_blue_led_pdata,
- },
-};
-
-static struct platform_device n30_warning_led = {
- .name = "s3c24xx_led",
- .id = 2,
- .dev = {
- .platform_data = &n30_warning_led_pdata,
- },
-};
-
-static struct platform_device n35_warning_led = {
- .name = "s3c24xx_led",
- .id = 2,
- .dev = {
- .platform_data = &n35_warning_led_pdata,
- },
-};
-
-static struct s3c2410fb_display n30_display __initdata = {
- .type = S3C2410_LCDCON1_TFT,
- .width = 240,
- .height = 320,
- .pixclock = 170000,
-
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .left_margin = 3,
- .right_margin = 40,
- .hsync_len = 40,
- .upper_margin = 2,
- .lower_margin = 3,
- .vsync_len = 2,
-
- .lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME,
-};
-
-static struct s3c2410fb_mach_info n30_fb_info __initdata = {
- .displays = &n30_display,
- .num_displays = 1,
- .default_display = 0,
- .lpcsel = 0x06,
-};
-
-static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
-{
- s3c24xx_mci_def_set_power(power_mode, vdd);
-
- switch (power_mode) {
- case MMC_POWER_ON:
- case MMC_POWER_UP:
- gpio_set_value(S3C2410_GPG(4), 1);
- break;
- case MMC_POWER_OFF:
- default:
- gpio_set_value(S3C2410_GPG(4), 0);
- break;
- }
-}
-
-static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = {
- .ocr_avail = MMC_VDD_32_33,
- .set_power = n30_sdi_set_power,
-};
-
-static struct gpiod_lookup_table n30_mci_gpio_table = {
- .dev_id = "s3c2410-sdi",
- .table = {
- /* Card detect S3C2410_GPF(1) */
- GPIO_LOOKUP("GPIOF", 1, "cd", GPIO_ACTIVE_LOW),
- /* Write protect S3C2410_GPG(10) */
- GPIO_LOOKUP("GPIOG", 10, "wp", GPIO_ACTIVE_LOW),
- { },
- /* bus pins */
- GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
- },
-};
-
-static struct platform_device *n30_devices[] __initdata = {
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_ohci,
- &s3c_device_rtc,
- &s3c_device_usbgadget,
- &s3c_device_sdi,
- &n30_button_device,
- &n30_blue_led,
- &n30_warning_led,
-};
-
-static struct platform_device *n35_devices[] __initdata = {
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_rtc,
- &s3c_device_usbgadget,
- &s3c_device_sdi,
- &n35_button_device,
- &n35_blue_led,
- &n35_warning_led,
-};
-
-static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
- .flags = 0,
- .slave_addr = 0x10,
- .frequency = 10*1000,
-};
-
-/* Lots of hardcoded stuff, but it sets up the hardware in a useful
- * state so that we can boot Linux directly from flash. */
-static void __init n30_hwinit(void)
-{
- /* GPA0-11 special functions -- unknown what they do
- * GPA12 N30 special function -- unknown what it does
- * N35/PiN output -- unknown what it does
- *
- * A12 is nGCS1 on the N30 and an output on the N35/PiN. I
- * don't think it does anything useful on the N30, so I ought
- * to make it an output there too since it always driven to 0
- * as far as I can tell. */
- if (machine_is_n30())
- __raw_writel(0x007fffff, S3C2410_GPACON);
- if (machine_is_n35())
- __raw_writel(0x007fefff, S3C2410_GPACON);
- __raw_writel(0x00000000, S3C2410_GPADAT);
-
- /* GPB0 TOUT0 backlight level
- * GPB1 output 1=backlight on
- * GPB2 output IrDA enable 0=transceiver enabled, 1=disabled
- * GPB3 output USB D+ pull up 0=disabled, 1=enabled
- * GPB4 N30 output -- unknown function
- * N30/PiN GPS control 0=GPS enabled, 1=GPS disabled
- * GPB5 output -- unknown function
- * GPB6 input -- unknown function
- * GPB7 output -- unknown function
- * GPB8 output -- probably LCD driver enable
- * GPB9 output -- probably LCD VSYNC driver enable
- * GPB10 output -- probably LCD HSYNC driver enable
- */
- __raw_writel(0x00154556, S3C2410_GPBCON);
- __raw_writel(0x00000750, S3C2410_GPBDAT);
- __raw_writel(0x00000073, S3C2410_GPBUP);
-
- /* GPC0 input RS232 DCD/DSR/RI
- * GPC1 LCD
- * GPC2 output RS232 DTR?
- * GPC3 input RS232 DCD/DSR/RI
- * GPC4 LCD
- * GPC5 output 0=NAND write enabled, 1=NAND write protect
- * GPC6 input -- unknown function
- * GPC7 input charger status 0=charger connected
- * this input can be triggered by power on the USB device
- * port too, but will go back to disconnected soon after.
- * GPC8 N30/N35 output -- unknown function, always driven to 1
- * PiN input -- unknown function, always read as 1
- * Make it an input with a pull up for all models.
- * GPC9-15 LCD
- */
- __raw_writel(0xaaa80618, S3C2410_GPCCON);
- __raw_writel(0x0000014c, S3C2410_GPCDAT);
- __raw_writel(0x0000fef2, S3C2410_GPCUP);
-
- /* GPD0 input -- unknown function
- * GPD1-D7 LCD
- * GPD8 N30 output -- unknown function
- * N35/PiN output 1=GPS LED on
- * GPD9 output 0=power led blinks red, 1=normal power led function
- * GPD10 output -- unknown function
- * GPD11-15 LCD drivers
- */
- __raw_writel(0xaa95aaa4, S3C2410_GPDCON);
- __raw_writel(0x00000601, S3C2410_GPDDAT);
- __raw_writel(0x0000fbfe, S3C2410_GPDUP);
-
- /* GPE0-4 I2S audio bus
- * GPE5-10 SD/MMC bus
- * E11-13 outputs -- unknown function, probably power management
- * E14-15 I2C bus connected to the battery controller
- */
- __raw_writel(0xa56aaaaa, S3C2410_GPECON);
- __raw_writel(0x0000efc5, S3C2410_GPEDAT);
- __raw_writel(0x0000f81f, S3C2410_GPEUP);
-
- /* GPF0 input 0=power button pressed
- * GPF1 input SD/MMC switch 0=card present
- * GPF2 N30 1=reset button pressed (inverted compared to the rest)
- * N35/PiN 0=reset button pressed
- * GPF3 N30/PiN input -- unknown function
- * N35 input GPS antenna position, 0=antenna closed, 1=open
- * GPF4 input 0=button 4 pressed
- * GPF5 input 0=button 3 pressed
- * GPF6 input 0=button 2 pressed
- * GPF7 input 0=button 1 pressed
- */
- __raw_writel(0x0000aaaa, S3C2410_GPFCON);
- __raw_writel(0x00000000, S3C2410_GPFDAT);
- __raw_writel(0x000000ff, S3C2410_GPFUP);
-
- /* GPG0 input RS232 DCD/DSR/RI
- * GPG1 input 1=USB gadget port has power from a host
- * GPG2 N30 input -- unknown function
- * N35/PiN input 0=headphones plugged in, 1=not plugged in
- * GPG3 N30 output -- unknown function
- * N35/PiN input with unknown function
- * GPG4 N30 output 0=MMC enabled, 1=MMC disabled
- * GPG5 N30 output 0=BlueTooth chip disabled, 1=enabled
- * N35/PiN input joystick right
- * GPG6 N30 output 0=blue led on, 1=off
- * N35/PiN input joystick left
- * GPG7 input 0=thumbwheel pressed
- * GPG8 input 0=thumbwheel down
- * GPG9 input 0=thumbwheel up
- * GPG10 input SD/MMC write protect switch
- * GPG11 N30 input -- unknown function
- * N35 output 0=GPS antenna powered, 1=not powered
- * PiN output -- unknown function
- * GPG12-15 touch screen functions
- *
- * The pullups differ between the models, so enable all
- * pullups that are enabled on any of the models.
- */
- if (machine_is_n30())
- __raw_writel(0xff0a956a, S3C2410_GPGCON);
- if (machine_is_n35())
- __raw_writel(0xff4aa92a, S3C2410_GPGCON);
- __raw_writel(0x0000e800, S3C2410_GPGDAT);
- __raw_writel(0x0000f86f, S3C2410_GPGUP);
-
- /* GPH0/1/2/3 RS232 serial port
- * GPH4/5 IrDA serial port
- * GPH6/7 N30 BlueTooth serial port
- * N35/PiN GPS receiver
- * GPH8 input -- unknown function
- * GPH9 CLKOUT0 HCLK -- unknown use
- * GPH10 CLKOUT1 FCLK -- unknown use
- *
- * The pull ups for H6/H7 are enabled on N30 but not on the
- * N35/PiN. I suppose is useful for a budget model of the N30
- * with no bluetooth. It doesn't hurt to have the pull ups
- * enabled on the N35, so leave them enabled for all models.
- */
- __raw_writel(0x0028aaaa, S3C2410_GPHCON);
- __raw_writel(0x000005ef, S3C2410_GPHDAT);
- __raw_writel(0x0000063f, S3C2410_GPHUP);
-}
-
-static void __init n30_map_io(void)
-{
- s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
- n30_hwinit();
- s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init n30_init_time(void)
-{
- s3c2410_init_clocks(12000000);
- samsung_timer_init();
-}
-
-/* GPB3 is the line that controls the pull-up for the USB D+ line */
-
-static void __init n30_init(void)
-{
- WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
-
- s3c24xx_fb_set_platdata(&n30_fb_info);
- s3c24xx_udc_set_platdata(&n30_udc_cfg);
- gpiod_add_lookup_table(&n30_mci_gpio_table);
- s3c24xx_mci_set_platdata(&n30_mci_cfg);
- s3c_i2c0_set_platdata(&n30_i2ccfg);
-
- /* Turn off suspend on both USB ports, and switch the
- * selectable USB port to USB device mode. */
-
- s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
- S3C2410_MISCCR_USBSUSPND0 |
- S3C2410_MISCCR_USBSUSPND1, 0x0);
-
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
- if (machine_is_n30()) {
- /* Turn off suspend on both USB ports, and switch the
- * selectable USB port to USB device mode. */
- s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
- S3C2410_MISCCR_USBSUSPND0 |
- S3C2410_MISCCR_USBSUSPND1, 0x0);
-
- /* Disable pull-up and add GPIO tables */
- s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
- gpiod_add_lookup_table(&n30_blue_led_gpio_table);
- gpiod_add_lookup_table(&n30_warning_led_gpio_table);
-
- platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
- }
-
- if (machine_is_n35()) {
- /* Turn off suspend and switch the selectable USB port
- * to USB device mode. Turn on suspend for the host
- * port since it is not connected on the N35.
- *
- * Actually, the host port is available at some pads
- * on the back of the device, so it would actually be
- * possible to add a USB device inside the N35 if you
- * are willing to do some hardware modifications. */
- s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
- S3C2410_MISCCR_USBSUSPND0 |
- S3C2410_MISCCR_USBSUSPND1,
- S3C2410_MISCCR_USBSUSPND0);
-
- /* Disable pull-up and add GPIO tables */
- s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
- gpiod_add_lookup_table(&n35_blue_led_gpio_table);
- gpiod_add_lookup_table(&n35_warning_led_gpio_table);
-
- platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
- }
-}
-
-MACHINE_START(N30, "Acer-N30")
- /* Maintainer: Christer Weinigel <christer@weinigel.se>,
- Ben Dooks <ben-linux@fluff.org>
- */
- .atag_offset = 0x100,
- .init_time = n30_init_time,
- .init_machine = n30_init,
- .init_irq = s3c2410_init_irq,
- .map_io = n30_map_io,
-MACHINE_END
-
-MACHINE_START(N35, "Acer-N35")
- /* Maintainer: Christer Weinigel <christer@weinigel.se>
- */
- .atag_offset = 0x100,
- .init_time = n30_init_time,
- .init_machine = n30_init,
- .init_irq = s3c2410_init_irq,
- .map_io = n30_map_io,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-// linux/arch/arm/mach-s3c2440/mach-nexcoder.c
-//
-// Copyright (c) 2004 Nex Vision
-// Guillaume GOURAT <guillaume.gourat@nexvision.tv>
-//
-// Modifications:
-// 15-10-2004 GG Created initial version
-// 12-03-2005 BJD Updated for release
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mtd/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-
-static struct map_desc nexcoder_iodesc[] __initdata = {
- /* nothing here yet */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- }
-};
-
-/* NOR Flash on NexVision NexCoder 2440 board */
-
-static struct resource nexcoder_nor_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_8M),
-};
-
-static struct map_info nexcoder_nor_map = {
- .bankwidth = 2,
-};
-
-static struct platform_device nexcoder_device_nor = {
- .name = "mtd-flash",
- .id = -1,
- .num_resources = ARRAY_SIZE(nexcoder_nor_resource),
- .resource = nexcoder_nor_resource,
- .dev =
- {
- .platform_data = &nexcoder_nor_map,
- }
-};
-
-/* Standard Nexcoder devices */
-
-static struct platform_device *nexcoder_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_rtc,
- &s3c_device_camif,
- &s3c_device_spi0,
- &s3c_device_spi1,
- &nexcoder_device_nor,
-};
-
-static void __init nexcoder_sensorboard_init(void)
-{
- /* Initialize SCCB bus */
- gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL);
- gpio_free(S3C2410_GPE(14)); /* IICSCL */
- gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL);
- gpio_free(S3C2410_GPE(15)); /* IICSDA */
-
- /* Power up the sensor board */
- gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL);
- gpio_free(S3C2410_GPF(1)); /* CAM_GPIO7 => nLDO_PWRDN */
- gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
- gpio_free(S3C2410_GPF(2)); /* CAM_GPIO6 => CAM_PWRDN */
-}
-
-static void __init nexcoder_map_io(void)
-{
- s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
- s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-
- nexcoder_sensorboard_init();
-}
-
-static void __init nexcoder_init_time(void)
-{
- s3c2440_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void __init nexcoder_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
-
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
- platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
-};
-
-MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
- /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
- .atag_offset = 0x100,
- .map_io = nexcoder_map_io,
- .init_machine = nexcoder_init,
- .init_irq = s3c2440_init_irq,
- .init_time = nexcoder_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009 Simtec Electronics
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Simtec Osiris Dynamic Voltage Scaling support.
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
-#include <linux/gpio.h>
-
-#include <linux/mfd/tps65010.h>
-
-#include <linux/soc/samsung/s3c-cpu-freq.h>
-#include <mach/gpio-samsung.h>
-
-#define OSIRIS_GPIO_DVS S3C2410_GPB(5)
-
-static bool dvs_en;
-
-static void osiris_dvs_tps_setdvs(bool on)
-{
- unsigned vregs1 = 0, vdcdc2 = 0;
-
- if (!on) {
- vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
- vregs1 = TPS_LDO1_OFF; /* turn off in low-power mode */
- }
-
- dvs_en = on;
- vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
- vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
-
- tps65010_config_vregs1(vregs1);
- tps65010_config_vdcdc2(vdcdc2);
-}
-
-static bool is_dvs(struct s3c_freq *f)
-{
- /* at the moment, we assume ARMCLK = HCLK => DVS */
- return f->armclk == f->hclk;
-}
-
-/* keep track of current state */
-static bool cur_dvs = false;
-
-static int osiris_dvs_notify(struct notifier_block *nb,
- unsigned long val, void *data)
-{
- struct cpufreq_freqs *cf = data;
- struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
- bool old_dvs = is_dvs(&freqs->old);
- bool new_dvs = is_dvs(&freqs->new);
- int ret = 0;
-
- if (!dvs_en)
- return 0;
-
- printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
- freqs->old.armclk, freqs->old.hclk,
- freqs->new.armclk, freqs->new.hclk);
-
- switch (val) {
- case CPUFREQ_PRECHANGE:
- if ((old_dvs && !new_dvs) ||
- (cur_dvs && !new_dvs)) {
- pr_debug("%s: exiting dvs\n", __func__);
- cur_dvs = false;
- gpio_set_value(OSIRIS_GPIO_DVS, 1);
- }
- break;
- case CPUFREQ_POSTCHANGE:
- if ((!old_dvs && new_dvs) ||
- (!cur_dvs && new_dvs)) {
- pr_debug("entering dvs\n");
- cur_dvs = true;
- gpio_set_value(OSIRIS_GPIO_DVS, 0);
- }
- break;
- }
-
- return ret;
-}
-
-static struct notifier_block osiris_dvs_nb = {
- .notifier_call = osiris_dvs_notify,
-};
-
-static int osiris_dvs_probe(struct platform_device *pdev)
-{
- int ret;
-
- dev_info(&pdev->dev, "initialising\n");
-
- ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
- if (ret) {
- dev_err(&pdev->dev, "cannot claim gpio\n");
- goto err_nogpio;
- }
-
- /* start with dvs disabled */
- gpio_direction_output(OSIRIS_GPIO_DVS, 1);
-
- ret = cpufreq_register_notifier(&osiris_dvs_nb,
- CPUFREQ_TRANSITION_NOTIFIER);
- if (ret) {
- dev_err(&pdev->dev, "failed to register with cpufreq\n");
- goto err_nofreq;
- }
-
- osiris_dvs_tps_setdvs(true);
-
- return 0;
-
-err_nofreq:
- gpio_free(OSIRIS_GPIO_DVS);
-
-err_nogpio:
- return ret;
-}
-
-static int osiris_dvs_remove(struct platform_device *pdev)
-{
- dev_info(&pdev->dev, "exiting\n");
-
- /* disable any current dvs */
- gpio_set_value(OSIRIS_GPIO_DVS, 1);
- osiris_dvs_tps_setdvs(false);
-
- cpufreq_unregister_notifier(&osiris_dvs_nb,
- CPUFREQ_TRANSITION_NOTIFIER);
-
- gpio_free(OSIRIS_GPIO_DVS);
-
- return 0;
-}
-
-/* the CONFIG_PM block is so small, it isn't worth actually compiling it
- * out if the configuration isn't set. */
-
-static int osiris_dvs_suspend(struct device *dev)
-{
- gpio_set_value(OSIRIS_GPIO_DVS, 1);
- osiris_dvs_tps_setdvs(false);
- cur_dvs = false;
-
- return 0;
-}
-
-static int osiris_dvs_resume(struct device *dev)
-{
- osiris_dvs_tps_setdvs(true);
- return 0;
-}
-
-static const struct dev_pm_ops osiris_dvs_pm = {
- .suspend = osiris_dvs_suspend,
- .resume = osiris_dvs_resume,
-};
-
-static struct platform_driver osiris_dvs_driver = {
- .probe = osiris_dvs_probe,
- .remove = osiris_dvs_remove,
- .driver = {
- .name = "osiris-dvs",
- .pm = &osiris_dvs_pm,
- },
-};
-
-module_platform_driver(osiris_dvs_driver);
-
-MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:osiris-dvs");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2005-2008 Simtec Electronics
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <linux/mfd/tps65010.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/cpu.h>
-#include <linux/soc/samsung/s3c-cpu-freq.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include "common.h"
-#include "osiris.h"
-#include "regs-mem.h"
-
-/* onboard perihperal map */
-
-static struct map_desc osiris_iodesc[] __initdata = {
- /* ISA IO areas (may be over-written later) */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(S3C2410_CS5),
- .length = SZ_16M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(S3C2410_CS5),
- .length = SZ_16M,
- .type = MT_DEVICE,
- },
-
- /* CPLD control registers */
-
- {
- .virtual = (u32)OSIRIS_VA_CTRL0,
- .pfn = __phys_to_pfn(OSIRIS_PA_CTRL0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)OSIRIS_VA_CTRL1,
- .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)OSIRIS_VA_CTRL2,
- .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)OSIRIS_VA_IDREG,
- .pfn = __phys_to_pfn(OSIRIS_PA_IDREG),
- .length = SZ_16K,
- .type = MT_DEVICE,
- },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
- }
-};
-
-/* NAND Flash on Osiris board */
-
-static int external_map[] = { 2 };
-static int chip0_map[] = { 0 };
-static int chip1_map[] = { 1 };
-
-static struct mtd_partition __initdata osiris_default_nand_part[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_16K,
- .offset = 0,
- },
- [1] = {
- .name = "/boot",
- .size = SZ_4M - SZ_16K,
- .offset = SZ_16K,
- },
- [2] = {
- .name = "user1",
- .offset = SZ_4M,
- .size = SZ_32M - SZ_4M,
- },
- [3] = {
- .name = "user2",
- .offset = SZ_32M,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_128K,
- .offset = 0,
- },
- [1] = {
- .name = "/boot",
- .size = SZ_4M - SZ_128K,
- .offset = SZ_128K,
- },
- [2] = {
- .name = "user1",
- .offset = SZ_4M,
- .size = SZ_32M - SZ_4M,
- },
- [3] = {
- .name = "user2",
- .offset = SZ_32M,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-/* the Osiris has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
- [1] = {
- .name = "External",
- .nr_chips = 1,
- .nr_map = external_map,
- .options = NAND_SCAN_SILENT_NODEV,
- .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
- .partitions = osiris_default_nand_part,
- },
- [0] = {
- .name = "chip0",
- .nr_chips = 1,
- .nr_map = chip0_map,
- .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
- .partitions = osiris_default_nand_part,
- },
- [2] = {
- .name = "chip1",
- .nr_chips = 1,
- .nr_map = chip1_map,
- .options = NAND_SCAN_SILENT_NODEV,
- .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
- .partitions = osiris_default_nand_part,
- },
-};
-
-static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
-{
- unsigned int tmp;
-
- slot = set->nr_map[slot] & 3;
-
- pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
- slot, set, set->nr_map);
-
- tmp = __raw_readb(OSIRIS_VA_CTRL0);
- tmp &= ~OSIRIS_CTRL0_NANDSEL;
- tmp |= slot;
-
- pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
-
- __raw_writeb(tmp, OSIRIS_VA_CTRL0);
-}
-
-static struct s3c2410_platform_nand __initdata osiris_nand_info = {
- .tacls = 25,
- .twrph0 = 60,
- .twrph1 = 60,
- .nr_sets = ARRAY_SIZE(osiris_nand_sets),
- .sets = osiris_nand_sets,
- .select_chip = osiris_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-/* PCMCIA control and configuration */
-
-static struct resource osiris_pcmcia_resource[] = {
- [0] = DEFINE_RES_MEM(0x0f000000, SZ_1M),
- [1] = DEFINE_RES_MEM(0x0c000000, SZ_1M),
-};
-
-static struct platform_device osiris_pcmcia = {
- .name = "osiris-pcmcia",
- .id = -1,
- .num_resources = ARRAY_SIZE(osiris_pcmcia_resource),
- .resource = osiris_pcmcia_resource,
-};
-
-/* Osiris power management device */
-
-#ifdef CONFIG_PM
-static unsigned char pm_osiris_ctrl0;
-
-static int osiris_pm_suspend(void)
-{
- unsigned int tmp;
-
- pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
- tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
-
- /* ensure correct NAND slot is selected on resume */
- if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
- tmp |= 2;
-
- __raw_writeb(tmp, OSIRIS_VA_CTRL0);
-
- /* ensure that an nRESET is not generated on resume. */
- gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL);
- gpio_free(S3C2410_GPA(21));
-
- return 0;
-}
-
-static void osiris_pm_resume(void)
-{
- if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
- __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
-
- __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
-
- s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-}
-
-#else
-#define osiris_pm_suspend NULL
-#define osiris_pm_resume NULL
-#endif
-
-static struct syscore_ops osiris_pm_syscore_ops = {
- .suspend = osiris_pm_suspend,
- .resume = osiris_pm_resume,
-};
-
-/* Link for DVS driver to TPS65011 */
-
-static void osiris_tps_release(struct device *dev)
-{
- /* static device, do not need to release anything */
-}
-
-static struct platform_device osiris_tps_device = {
- .name = "osiris-dvs",
- .id = -1,
- .dev.release = osiris_tps_release,
-};
-
-static int osiris_tps_setup(struct i2c_client *client, void *context)
-{
- osiris_tps_device.dev.parent = &client->dev;
- return platform_device_register(&osiris_tps_device);
-}
-
-static int osiris_tps_remove(struct i2c_client *client, void *context)
-{
- platform_device_unregister(&osiris_tps_device);
- return 0;
-}
-
-static struct tps65010_board osiris_tps_board = {
- .base = -1, /* GPIO can go anywhere at the moment */
- .setup = osiris_tps_setup,
- .teardown = osiris_tps_remove,
-};
-
-/* I2C devices fitted. */
-
-static struct i2c_board_info osiris_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("tps65011", 0x48),
- .irq = IRQ_EINT20,
- .platform_data = &osiris_tps_board,
- },
-};
-
-/* Standard Osiris devices */
-
-static struct platform_device *osiris_devices[] __initdata = {
- &s3c2410_device_dclk,
- &s3c_device_i2c0,
- &s3c_device_wdt,
- &s3c_device_nand,
- &osiris_pcmcia,
-};
-
-static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
- .refresh = 7800, /* refresh period is 7.8usec */
- .auto_io = 1,
- .need_io = 1,
-};
-
-static void __init osiris_map_io(void)
-{
- unsigned long flags;
-
- s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
- s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-
- /* check for the newer revision boards with large page nand */
-
- if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
- printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
- __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
- osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
- osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
- } else {
- /* write-protect line to the NAND */
- gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
- gpio_free(S3C2410_GPA(0));
- }
-
- /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
-
- local_irq_save(flags);
- __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
- local_irq_restore(flags);
-}
-
-static void __init osiris_init_time(void)
-{
- s3c2440_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void __init osiris_init(void)
-{
- register_syscore_ops(&osiris_pm_syscore_ops);
-
- s3c_i2c0_set_platdata(NULL);
- s3c_nand_set_platdata(&osiris_nand_info);
-
- s3c_cpufreq_setboard(&osiris_cpufreq);
-
- i2c_register_board_info(0, osiris_i2c_devs,
- ARRAY_SIZE(osiris_i2c_devs));
-
- platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
-};
-
-MACHINE_START(OSIRIS, "Simtec-OSIRIS")
- /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .atag_offset = 0x100,
- .map_io = osiris_map_io,
- .init_irq = s3c2440_init_irq,
- .init_machine = osiris_init,
- .init_time = osiris_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2004 Nex Vision
-// Guillaume GOURAT <guillaume.gourat@nexvision.fr>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-
-#include "common.h"
-#include "otom.h"
-
-static struct map_desc otom11_iodesc[] __initdata = {
- /* Device area */
- { (u32)OTOM_VA_CS8900A_BASE, OTOM_PA_CS8900A_BASE, SZ_16M, MT_DEVICE },
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg otom11_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- /* port 2 is not actually used */
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- }
-};
-
-/* NOR Flash on NexVision OTOM board */
-
-static struct resource otom_nor_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_4M),
-};
-
-static struct platform_device otom_device_nor = {
- .name = "mtd-flash",
- .id = -1,
- .num_resources = ARRAY_SIZE(otom_nor_resource),
- .resource = otom_nor_resource,
-};
-
-/* Standard OTOM devices */
-
-static struct platform_device *otom11_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_rtc,
- &otom_device_nor,
-};
-
-static void __init otom11_map_io(void)
-{
- s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
- s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init otom11_init_time(void)
-{
- s3c2410_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void __init otom11_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
-
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
- platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
-}
-
-MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
- /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
- .atag_offset = 0x100,
- .map_io = otom11_map_io,
- .init_machine = otom11_init,
- .init_irq = s3c2410_init_irq,
- .init_time = otom11_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2006 by OpenMoko, Inc.
-// Author: Harald Welte <laforge@openmoko.org>
-// All rights reserved.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include "common.h"
-#include "common-smdk.h"
-
-static struct map_desc qt2410_iodesc[] __initdata = {
- { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- }
-};
-
-/* LCD driver info */
-
-static struct s3c2410fb_display qt2410_lcd_cfg[] __initdata = {
- {
- /* Configuration for 640x480 SHARP LQ080V3DG01 */
- .lcdcon5 = S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_PWREN |
- S3C2410_LCDCON5_HWSWP,
-
- .type = S3C2410_LCDCON1_TFT,
- .width = 640,
- .height = 480,
-
- .pixclock = 40000, /* HCLK/4 */
- .xres = 640,
- .yres = 480,
- .bpp = 16,
- .left_margin = 44,
- .right_margin = 116,
- .hsync_len = 96,
- .upper_margin = 19,
- .lower_margin = 11,
- .vsync_len = 15,
- },
- {
- /* Configuration for 480x640 toppoly TD028TTEC1 */
- .lcdcon5 = S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_PWREN |
- S3C2410_LCDCON5_HWSWP,
-
- .type = S3C2410_LCDCON1_TFT,
- .width = 480,
- .height = 640,
- .pixclock = 40000, /* HCLK/4 */
- .xres = 480,
- .yres = 640,
- .bpp = 16,
- .left_margin = 8,
- .right_margin = 24,
- .hsync_len = 8,
- .upper_margin = 2,
- .lower_margin = 4,
- .vsync_len = 2,
- },
- {
- /* Config for 240x320 LCD */
- .lcdcon5 = S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_PWREN |
- S3C2410_LCDCON5_HWSWP,
-
- .type = S3C2410_LCDCON1_TFT,
- .width = 240,
- .height = 320,
- .pixclock = 100000, /* HCLK/10 */
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .left_margin = 13,
- .right_margin = 8,
- .hsync_len = 4,
- .upper_margin = 2,
- .lower_margin = 7,
- .vsync_len = 4,
- },
-};
-
-
-static struct s3c2410fb_mach_info qt2410_fb_info __initdata = {
- .displays = qt2410_lcd_cfg,
- .num_displays = ARRAY_SIZE(qt2410_lcd_cfg),
- .default_display = 0,
-
- .lpcsel = ((0xCE6) & ~7) | 1<<4,
-};
-
-/* CS8900 */
-
-static struct resource qt2410_cs89x0_resources[] = {
- [0] = DEFINE_RES_MEM(0x19000000, 17),
- [1] = DEFINE_RES_IRQ(IRQ_EINT9),
-};
-
-static struct platform_device qt2410_cs89x0 = {
- .name = "cirrus-cs89x0",
- .num_resources = ARRAY_SIZE(qt2410_cs89x0_resources),
- .resource = qt2410_cs89x0_resources,
-};
-
-/* LED */
-
-static struct gpiod_lookup_table qt2410_led_gpio_table = {
- .dev_id = "s3c24xx_led.0",
- .table = {
- GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
- { },
- },
-};
-
-static struct s3c24xx_led_platdata qt2410_pdata_led = {
- .name = "led",
- .def_trigger = "timer",
-};
-
-static struct platform_device qt2410_led = {
- .name = "s3c24xx_led",
- .id = 0,
- .dev = {
- .platform_data = &qt2410_pdata_led,
- },
-};
-
-/* SPI */
-
-static struct spi_gpio_platform_data spi_gpio_cfg = {
- .num_chipselect = 1,
-};
-
-static struct platform_device qt2410_spi = {
- .name = "spi_gpio",
- .id = 1,
- .dev.platform_data = &spi_gpio_cfg,
-};
-
-static struct gpiod_lookup_table qt2410_spi_gpiod_table = {
- .dev_id = "spi_gpio",
- .table = {
- GPIO_LOOKUP("GPIOG", 7,
- "sck", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPIOG", 6,
- "mosi", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPIOG", 5,
- "miso", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPIOB", 5,
- "cs", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct gpiod_lookup_table qt2410_mmc_gpiod_table = {
- .dev_id = "s3c2410-sdi",
- .table = {
- /* bus pins */
- GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-/* Board devices */
-
-static struct platform_device *qt2410_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_sdi,
- &s3c_device_usbgadget,
- &qt2410_spi,
- &qt2410_cs89x0,
- &qt2410_led,
-};
-
-static struct mtd_partition __initdata qt2410_nand_part[] = {
- [0] = {
- .name = "U-Boot",
- .size = 0x30000,
- .offset = 0,
- },
- [1] = {
- .name = "U-Boot environment",
- .offset = 0x30000,
- .size = 0x4000,
- },
- [2] = {
- .name = "kernel",
- .offset = 0x34000,
- .size = SZ_2M,
- },
- [3] = {
- .name = "initrd",
- .offset = 0x234000,
- .size = SZ_4M,
- },
- [4] = {
- .name = "jffs2",
- .offset = 0x634000,
- .size = 0x39cc000,
- },
-};
-
-static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = {
- [0] = {
- .name = "NAND",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(qt2410_nand_part),
- .partitions = qt2410_nand_part,
- },
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
- */
-
-static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
- .tacls = 20,
- .twrph0 = 60,
- .twrph1 = 20,
- .nr_sets = ARRAY_SIZE(qt2410_nand_sets),
- .sets = qt2410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-/* UDC */
-
-static struct s3c2410_udc_mach_info qt2410_udc_cfg = {
-};
-
-static char tft_type = 's';
-
-static int __init qt2410_tft_setup(char *str)
-{
- tft_type = str[0];
- return 1;
-}
-
-__setup("tft=", qt2410_tft_setup);
-
-static void __init qt2410_map_io(void)
-{
- s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
- s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init qt2410_init_time(void)
-{
- s3c2410_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void __init qt2410_machine_init(void)
-{
- s3c_nand_set_platdata(&qt2410_nand_info);
-
- switch (tft_type) {
- case 'p': /* production */
- qt2410_fb_info.default_display = 1;
- break;
- case 'b': /* big */
- qt2410_fb_info.default_display = 0;
- break;
- case 's': /* small */
- default:
- qt2410_fb_info.default_display = 2;
- break;
- }
- s3c24xx_fb_set_platdata(&qt2410_fb_info);
-
- /* set initial state of the LED GPIO */
- WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL));
- gpio_free(S3C2410_GPB(0));
-
- s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
- s3c_i2c0_set_platdata(NULL);
-
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
- gpiod_add_lookup_table(&qt2410_spi_gpiod_table);
- s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
- gpiod_add_lookup_table(&qt2410_led_gpio_table);
- gpiod_add_lookup_table(&qt2410_mmc_gpiod_table);
- platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
- s3c_pm_init();
-}
-
-MACHINE_START(QT2410, "QT2410")
- .atag_offset = 0x100,
- .map_io = qt2410_map_io,
- .init_irq = s3c2410_init_irq,
- .init_machine = qt2410_machine_init,
- .init_time = qt2410_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
-// Copyright (c) 2007-2010 Vasily Khoruzhick
-//
-// based on smdk2440 written by Ben Dooks
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/device.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/pwm.h>
-#include <linux/s3c_adc_battery.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/mmc/host.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include <sound/uda1380.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/gpio-cfg.h>
-
-#include "common.h"
-#include "h1940.h"
-
-#define LCD_PWM_PERIOD 192960
-#define LCD_PWM_DUTY 127353
-
-static struct map_desc rx1950_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- .clk_sel = S3C2410_UCON_CLKSEL3,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- .clk_sel = S3C2410_UCON_CLKSEL3,
- },
- /* IR port */
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x43,
- .ufcon = 0xf1,
- .clk_sel = S3C2410_UCON_CLKSEL3,
- },
-};
-
-static struct s3c2410fb_display rx1950_display = {
- .type = S3C2410_LCDCON1_TFT,
- .width = 240,
- .height = 320,
- .xres = 240,
- .yres = 320,
- .bpp = 16,
-
- .pixclock = 260000,
- .left_margin = 10,
- .right_margin = 20,
- .hsync_len = 10,
- .upper_margin = 2,
- .lower_margin = 2,
- .vsync_len = 2,
-
- .lcdcon5 = S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVCLK |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_HWSWP |
- (0x02 << 13) |
- (0x02 << 15),
-
-};
-
-static int power_supply_init(struct device *dev)
-{
- return gpio_request(S3C2410_GPF(2), "cable plugged");
-}
-
-static int rx1950_is_ac_online(void)
-{
- return !gpio_get_value(S3C2410_GPF(2));
-}
-
-static void power_supply_exit(struct device *dev)
-{
- gpio_free(S3C2410_GPF(2));
-}
-
-static char *rx1950_supplicants[] = {
- "main-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = rx1950_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = rx1950_supplicants,
- .num_supplicants = ARRAY_SIZE(rx1950_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
- [0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
- | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data =
- &power_supply_info,
- },
- .resource = power_supply_resources,
- .num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
- { .volt = 4100, .cur = 156, .level = 100},
- { .volt = 4050, .cur = 156, .level = 95},
- { .volt = 4025, .cur = 141, .level = 90},
- { .volt = 3995, .cur = 144, .level = 85},
- { .volt = 3957, .cur = 162, .level = 80},
- { .volt = 3931, .cur = 147, .level = 75},
- { .volt = 3902, .cur = 147, .level = 70},
- { .volt = 3863, .cur = 153, .level = 65},
- { .volt = 3838, .cur = 150, .level = 60},
- { .volt = 3800, .cur = 153, .level = 55},
- { .volt = 3765, .cur = 153, .level = 50},
- { .volt = 3748, .cur = 172, .level = 45},
- { .volt = 3740, .cur = 153, .level = 40},
- { .volt = 3714, .cur = 175, .level = 35},
- { .volt = 3710, .cur = 156, .level = 30},
- { .volt = 3963, .cur = 156, .level = 25},
- { .volt = 3672, .cur = 178, .level = 20},
- { .volt = 3651, .cur = 178, .level = 15},
- { .volt = 3629, .cur = 178, .level = 10},
- { .volt = 3612, .cur = 162, .level = 5},
- { .volt = 3605, .cur = 162, .level = 0},
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
- { .volt = 4200, .cur = 0, .level = 100},
- { .volt = 4190, .cur = 0, .level = 99},
- { .volt = 4178, .cur = 0, .level = 95},
- { .volt = 4110, .cur = 0, .level = 70},
- { .volt = 4076, .cur = 0, .level = 65},
- { .volt = 4046, .cur = 0, .level = 60},
- { .volt = 4021, .cur = 0, .level = 55},
- { .volt = 3999, .cur = 0, .level = 50},
- { .volt = 3982, .cur = 0, .level = 45},
- { .volt = 3965, .cur = 0, .level = 40},
- { .volt = 3957, .cur = 0, .level = 35},
- { .volt = 3948, .cur = 0, .level = 30},
- { .volt = 3936, .cur = 0, .level = 25},
- { .volt = 3927, .cur = 0, .level = 20},
- { .volt = 3906, .cur = 0, .level = 15},
- { .volt = 3880, .cur = 0, .level = 10},
- { .volt = 3829, .cur = 0, .level = 5},
- { .volt = 3820, .cur = 0, .level = 0},
-};
-
-static int rx1950_bat_init(void)
-{
- int ret;
-
- ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
- if (ret)
- goto err_gpio1;
- ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
- if (ret)
- goto err_gpio2;
-
- return 0;
-
-err_gpio2:
- gpio_free(S3C2410_GPJ(2));
-err_gpio1:
- return ret;
-}
-
-static void rx1950_bat_exit(void)
-{
- gpio_free(S3C2410_GPJ(2));
- gpio_free(S3C2410_GPJ(3));
-}
-
-static void rx1950_enable_charger(void)
-{
- gpio_direction_output(S3C2410_GPJ(2), 1);
- gpio_direction_output(S3C2410_GPJ(3), 1);
-}
-
-static void rx1950_disable_charger(void)
-{
- gpio_direction_output(S3C2410_GPJ(2), 0);
- gpio_direction_output(S3C2410_GPJ(3), 0);
-}
-
-static DEFINE_SPINLOCK(rx1950_blink_spin);
-
-static int rx1950_led_blink_set(struct gpio_desc *desc, int state,
- unsigned long *delay_on, unsigned long *delay_off)
-{
- int gpio = desc_to_gpio(desc);
- int blink_gpio, check_gpio;
-
- switch (gpio) {
- case S3C2410_GPA(6):
- blink_gpio = S3C2410_GPA(4);
- check_gpio = S3C2410_GPA(3);
- break;
- case S3C2410_GPA(7):
- blink_gpio = S3C2410_GPA(3);
- check_gpio = S3C2410_GPA(4);
- break;
- default:
- return -EINVAL;
- break;
- }
-
- if (delay_on && delay_off && !*delay_on && !*delay_off)
- *delay_on = *delay_off = 500;
-
- spin_lock(&rx1950_blink_spin);
-
- switch (state) {
- case GPIO_LED_NO_BLINK_LOW:
- case GPIO_LED_NO_BLINK_HIGH:
- if (!gpio_get_value(check_gpio))
- gpio_set_value(S3C2410_GPJ(6), 0);
- gpio_set_value(blink_gpio, 0);
- gpio_set_value(gpio, state);
- break;
- case GPIO_LED_BLINK:
- gpio_set_value(gpio, 0);
- gpio_set_value(S3C2410_GPJ(6), 1);
- gpio_set_value(blink_gpio, 1);
- break;
- }
-
- spin_unlock(&rx1950_blink_spin);
-
- return 0;
-}
-
-static struct gpio_led rx1950_leds_desc[] = {
- {
- .name = "Green",
- .default_trigger = "main-battery-full",
- .gpio = S3C2410_GPA(6),
- .retain_state_suspended = 1,
- },
- {
- .name = "Red",
- .default_trigger
- = "main-battery-charging-blink-full-solid",
- .gpio = S3C2410_GPA(7),
- .retain_state_suspended = 1,
- },
- {
- .name = "Blue",
- .default_trigger = "rx1950-acx-mem",
- .gpio = S3C2410_GPA(11),
- .retain_state_suspended = 1,
- },
-};
-
-static struct gpio_led_platform_data rx1950_leds_pdata = {
- .num_leds = ARRAY_SIZE(rx1950_leds_desc),
- .leds = rx1950_leds_desc,
- .gpio_blink_set = rx1950_led_blink_set,
-};
-
-static struct platform_device rx1950_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &rx1950_leds_pdata,
- },
-};
-
-static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
- .init = rx1950_bat_init,
- .exit = rx1950_bat_exit,
- .enable_charger = rx1950_enable_charger,
- .disable_charger = rx1950_disable_charger,
- .gpio_charge_finished = S3C2410_GPF(3),
- .lut_noac = bat_lut_noac,
- .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
- .lut_acin = bat_lut_acin,
- .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
- .volt_channel = 0,
- .current_channel = 1,
- .volt_mult = 4235,
- .current_mult = 2900,
- .internal_impedance = 200,
-};
-
-static struct platform_device rx1950_battery = {
- .name = "s3c-adc-battery",
- .id = -1,
- .dev = {
- .parent = &s3c_device_adc.dev,
- .platform_data = &rx1950_bat_cfg,
- },
-};
-
-static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
- .displays = &rx1950_display,
- .num_displays = 1,
- .default_display = 0,
-
- .lpcsel = 0x02,
- .gpccon = 0xaa9556a9,
- .gpccon_mask = 0xffc003fc,
- .gpccon_reg = S3C2410_GPCCON,
- .gpcup = 0x0000ffff,
- .gpcup_mask = 0xffffffff,
- .gpcup_reg = S3C2410_GPCUP,
-
- .gpdcon = 0xaa90aaa1,
- .gpdcon_mask = 0xffc0fff0,
- .gpdcon_reg = S3C2410_GPDCON,
- .gpdup = 0x0000fcfd,
- .gpdup_mask = 0xffffffff,
- .gpdup_reg = S3C2410_GPDUP,
-};
-
-static struct pwm_lookup rx1950_pwm_lookup[] = {
- PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000,
- PWM_POLARITY_NORMAL),
-};
-
-static struct pwm_device *lcd_pwm;
-static struct pwm_state lcd_pwm_state;
-
-static void rx1950_lcd_power(int enable)
-{
- int i;
- static int enabled;
- if (enabled == enable)
- return;
- if (!enable) {
-
- /* GPC11-GPC15->OUTPUT */
- for (i = 11; i < 16; i++)
- gpio_direction_output(S3C2410_GPC(i), 1);
-
- /* Wait a bit here... */
- mdelay(100);
-
- /* GPD2-GPD7->OUTPUT */
- /* GPD11-GPD15->OUTPUT */
- /* GPD2-GPD7->1, GPD11-GPD15->1 */
- for (i = 2; i < 8; i++)
- gpio_direction_output(S3C2410_GPD(i), 1);
- for (i = 11; i < 16; i++)
- gpio_direction_output(S3C2410_GPD(i), 1);
-
- /* Wait a bit here...*/
- mdelay(100);
-
- /* GPB0->OUTPUT, GPB0->0 */
- gpio_direction_output(S3C2410_GPB(0), 0);
-
- /* GPC1-GPC4->OUTPUT, GPC1-4->0 */
- for (i = 1; i < 5; i++)
- gpio_direction_output(S3C2410_GPC(i), 0);
-
- /* GPC15-GPC11->0 */
- for (i = 11; i < 16; i++)
- gpio_direction_output(S3C2410_GPC(i), 0);
-
- /* GPD15-GPD11->0, GPD2->GPD7->0 */
- for (i = 11; i < 16; i++)
- gpio_direction_output(S3C2410_GPD(i), 0);
-
- for (i = 2; i < 8; i++)
- gpio_direction_output(S3C2410_GPD(i), 0);
-
- /* GPC6->0, GPC7->0, GPC5->0 */
- gpio_direction_output(S3C2410_GPC(6), 0);
- gpio_direction_output(S3C2410_GPC(7), 0);
- gpio_direction_output(S3C2410_GPC(5), 0);
-
- /* GPB1->OUTPUT, GPB1->0 */
- gpio_direction_output(S3C2410_GPB(1), 0);
-
- lcd_pwm_state.enabled = false;
- pwm_apply_state(lcd_pwm, &lcd_pwm_state);
-
- /* GPC0->0, GPC10->0 */
- gpio_direction_output(S3C2410_GPC(0), 0);
- gpio_direction_output(S3C2410_GPC(10), 0);
- } else {
- lcd_pwm_state.enabled = true;
- pwm_apply_state(lcd_pwm, &lcd_pwm_state);
-
- gpio_direction_output(S3C2410_GPC(0), 1);
- gpio_direction_output(S3C2410_GPC(5), 1);
-
- s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
- gpio_direction_output(S3C2410_GPC(7), 1);
-
- for (i = 1; i < 5; i++)
- s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
-
- for (i = 11; i < 16; i++)
- s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
-
- for (i = 2; i < 8; i++)
- s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
-
- for (i = 11; i < 16; i++)
- s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
-
- gpio_direction_output(S3C2410_GPC(10), 1);
- gpio_direction_output(S3C2410_GPC(6), 1);
- }
- enabled = enable;
-}
-
-static void rx1950_bl_power(int enable)
-{
- static int enabled;
- if (enabled == enable)
- return;
- if (!enable) {
- gpio_direction_output(S3C2410_GPB(0), 0);
- } else {
- /* LED driver need a "push" to power on */
- gpio_direction_output(S3C2410_GPB(0), 1);
- /* Warm up backlight for one period of PWM.
- * Without this trick its almost impossible to
- * enable backlight with low brightness value
- */
- ndelay(48000);
- s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
- }
- enabled = enable;
-}
-
-static int rx1950_backlight_init(struct device *dev)
-{
- WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
- lcd_pwm = pwm_request(1, "RX1950 LCD");
- if (IS_ERR(lcd_pwm)) {
- dev_err(dev, "Unable to request PWM for LCD power!\n");
- return PTR_ERR(lcd_pwm);
- }
-
- /*
- * This is only required to initialize .polarity; all other values are
- * fixed in this driver.
- */
- pwm_init_state(lcd_pwm, &lcd_pwm_state);
-
- lcd_pwm_state.period = LCD_PWM_PERIOD;
- lcd_pwm_state.duty_cycle = LCD_PWM_DUTY;
-
- rx1950_lcd_power(1);
- rx1950_bl_power(1);
-
- return 0;
-}
-
-static void rx1950_backlight_exit(struct device *dev)
-{
- rx1950_bl_power(0);
- rx1950_lcd_power(0);
-
- pwm_free(lcd_pwm);
- gpio_free(S3C2410_GPB(0));
-}
-
-
-static int rx1950_backlight_notify(struct device *dev, int brightness)
-{
- if (!brightness) {
- rx1950_bl_power(0);
- rx1950_lcd_power(0);
- } else {
- rx1950_lcd_power(1);
- rx1950_bl_power(1);
- }
- return brightness;
-}
-
-static struct platform_pwm_backlight_data rx1950_backlight_data = {
- .max_brightness = 24,
- .dft_brightness = 4,
- .init = rx1950_backlight_init,
- .notify = rx1950_backlight_notify,
- .exit = rx1950_backlight_exit,
-};
-
-static struct platform_device rx1950_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &samsung_device_pwm.dev,
- .platform_data = &rx1950_backlight_data,
- },
-};
-
-static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
-{
- s3c24xx_mci_def_set_power(power_mode, vdd);
-
- switch (power_mode) {
- case MMC_POWER_OFF:
- gpio_direction_output(S3C2410_GPJ(1), 0);
- break;
- case MMC_POWER_UP:
- case MMC_POWER_ON:
- gpio_direction_output(S3C2410_GPJ(1), 1);
- break;
- default:
- break;
- }
-}
-
-static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
- .set_power = rx1950_set_mmc_power,
- .ocr_avail = MMC_VDD_32_33,
-};
-
-static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
- .dev_id = "s3c2410-sdi",
- .table = {
- /* Card detect S3C2410_GPF(5) */
- GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
- /* Write protect S3C2410_GPH(8) */
- GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
- /* bus pins */
- GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct mtd_partition rx1950_nand_part[] = {
- [0] = {
- .name = "Boot0",
- .offset = 0,
- .size = 0x4000,
- .mask_flags = MTD_WRITEABLE,
- },
- [1] = {
- .name = "Boot1",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x40000,
- .mask_flags = MTD_WRITEABLE,
- },
- [2] = {
- .name = "Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x300000,
- .mask_flags = 0,
- },
- [3] = {
- .name = "Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- },
-};
-
-static struct s3c2410_nand_set rx1950_nand_sets[] = {
- [0] = {
- .name = "Internal",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(rx1950_nand_part),
- .partitions = rx1950_nand_part,
- },
-};
-
-static struct s3c2410_platform_nand rx1950_nand_info = {
- .tacls = 25,
- .twrph0 = 50,
- .twrph1 = 15,
- .nr_sets = ARRAY_SIZE(rx1950_nand_sets),
- .sets = rx1950_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG(5),
- .vbus_pin_inverted = 1,
- .pullup_pin = S3C2410_GPJ(5),
-};
-
-static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 3,
-};
-
-static struct gpio_keys_button rx1950_gpio_keys_table[] = {
- {
- .code = KEY_POWER,
- .gpio = S3C2410_GPF(0),
- .active_low = 1,
- .desc = "Power button",
- .wakeup = 1,
- },
- {
- .code = KEY_F5,
- .gpio = S3C2410_GPF(7),
- .active_low = 1,
- .desc = "Record button",
- },
- {
- .code = KEY_F1,
- .gpio = S3C2410_GPG(0),
- .active_low = 1,
- .desc = "Calendar button",
- },
- {
- .code = KEY_F2,
- .gpio = S3C2410_GPG(2),
- .active_low = 1,
- .desc = "Contacts button",
- },
- {
- .code = KEY_F3,
- .gpio = S3C2410_GPG(3),
- .active_low = 1,
- .desc = "Mail button",
- },
- {
- .code = KEY_F4,
- .gpio = S3C2410_GPG(7),
- .active_low = 1,
- .desc = "WLAN button",
- },
- {
- .code = KEY_LEFT,
- .gpio = S3C2410_GPG(10),
- .active_low = 1,
- .desc = "Left button",
- },
- {
- .code = KEY_RIGHT,
- .gpio = S3C2410_GPG(11),
- .active_low = 1,
- .desc = "Right button",
- },
- {
- .code = KEY_UP,
- .gpio = S3C2410_GPG(4),
- .active_low = 1,
- .desc = "Up button",
- },
- {
- .code = KEY_DOWN,
- .gpio = S3C2410_GPG(6),
- .active_low = 1,
- .desc = "Down button",
- },
- {
- .code = KEY_ENTER,
- .gpio = S3C2410_GPG(9),
- .active_low = 1,
- .desc = "Ok button"
- },
-};
-
-static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
- .buttons = rx1950_gpio_keys_table,
- .nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
-};
-
-static struct platform_device rx1950_device_gpiokeys = {
- .name = "gpio-keys",
- .dev.platform_data = &rx1950_gpio_keys_data,
-};
-
-static struct uda1380_platform_data uda1380_info = {
- .gpio_power = S3C2410_GPJ(0),
- .gpio_reset = S3C2410_GPD(0),
- .dac_clk = UDA1380_DAC_CLK_SYSCLK,
-};
-
-static struct i2c_board_info rx1950_i2c_devices[] = {
- {
- I2C_BOARD_INFO("uda1380", 0x1a),
- .platform_data = &uda1380_info,
- },
-};
-
-static struct gpiod_lookup_table rx1950_audio_gpio_table = {
- .dev_id = "rx1950-audio",
- .table = {
- GPIO_LOOKUP("GPIOG", 12, "hp-gpio", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPIOA", 1, "speaker-power", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct platform_device rx1950_audio = {
- .name = "rx1950-audio",
- .id = -1,
-};
-
-static struct platform_device *rx1950_devices[] __initdata = {
- &s3c2410_device_dclk,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_usbgadget,
- &s3c_device_rtc,
- &s3c_device_nand,
- &s3c_device_sdi,
- &s3c_device_adc,
- &s3c_device_ts,
- &samsung_device_pwm,
- &rx1950_backlight,
- &rx1950_device_gpiokeys,
- &power_supply,
- &rx1950_battery,
- &rx1950_leds,
- &rx1950_audio,
-};
-
-static void __init rx1950_map_io(void)
-{
- s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
- s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-
- /* setup PM */
-
-#ifdef CONFIG_PM_H1940
- memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
-#endif
-
- s3c_pm_init();
-}
-
-static void __init rx1950_init_time(void)
-{
- s3c2442_init_clocks(16934000);
- samsung_timer_init();
-}
-
-static void __init rx1950_init_machine(void)
-{
- int i;
-
- s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
- s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
- s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
- gpiod_add_lookup_table(&rx1950_mmc_gpio_table);
- s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
- s3c_i2c0_set_platdata(NULL);
- s3c_nand_set_platdata(&rx1950_nand_info);
-
- /* Turn off suspend on both USB ports, and switch the
- * selectable USB port to USB device mode. */
- s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
- S3C2410_MISCCR_USBSUSPND0 |
- S3C2410_MISCCR_USBSUSPND1, 0x0);
-
- /* mmc power is disabled by default */
- WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
- gpio_direction_output(S3C2410_GPJ(1), 0);
-
- for (i = 0; i < 8; i++)
- WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
-
- for (i = 10; i < 16; i++)
- WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
-
- for (i = 2; i < 8; i++)
- WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
-
- for (i = 11; i < 16; i++)
- WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
-
- WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
-
- WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
- WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
- WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
- gpio_direction_output(S3C2410_GPA(3), 0);
- gpio_direction_output(S3C2410_GPA(4), 0);
- gpio_direction_output(S3C2410_GPJ(6), 0);
-
- pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
- gpiod_add_lookup_table(&rx1950_audio_gpio_table);
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
- platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
-
- i2c_register_board_info(0, rx1950_i2c_devices,
- ARRAY_SIZE(rx1950_i2c_devices));
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init rx1950_reserve(void)
-{
- memblock_reserve(0x30003000, 0x1000);
- memblock_reserve(0x30081000, 0x1000);
-}
-
-MACHINE_START(RX1950, "HP iPAQ RX1950")
- /* Maintainers: Vasily Khoruzhick */
- .atag_offset = 0x100,
- .map_io = rx1950_map_io,
- .reserve = rx1950_reserve,
- .init_irq = s3c2442_init_irq,
- .init_machine = rx1950_init_machine,
- .init_time = rx1950_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2004 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// https://www.handhelds.org/projects/rx3715.html
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-
-#include "common.h"
-#include "h1940.h"
-
-static struct map_desc rx3715_iodesc[] __initdata = {
- /* dump ISA space somewhere unused */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(S3C2410_CS3),
- .length = SZ_1M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(S3C2410_CS3),
- .length = SZ_1M,
- .type = MT_DEVICE,
- },
-};
-
-static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- .clk_sel = S3C2410_UCON_CLKSEL3,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x00,
- .clk_sel = S3C2410_UCON_CLKSEL3,
- },
- /* IR port */
- [2] = {
- .hwport = 2,
- .uart_flags = UPF_CONS_FLOW,
- .ucon = 0x3c5,
- .ulcon = 0x43,
- .ufcon = 0x51,
- .clk_sel = S3C2410_UCON_CLKSEL3,
- }
-};
-
-/* framebuffer lcd controller information */
-
-static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
- .lcdcon5 = S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_HWSWP,
-
- .type = S3C2410_LCDCON1_TFT,
- .width = 240,
- .height = 320,
-
- .pixclock = 260000,
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .left_margin = 36,
- .right_margin = 36,
- .hsync_len = 8,
- .upper_margin = 6,
- .lower_margin = 7,
- .vsync_len = 3,
-};
-
-static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
-
- .displays = &rx3715_lcdcfg,
- .num_displays = 1,
- .default_display = 0,
-
- .lpcsel = 0xf82,
-
- .gpccon = 0xaa955699,
- .gpccon_mask = 0xffc003cc,
- .gpccon_reg = S3C2410_GPCCON,
- .gpcup = 0x0000ffff,
- .gpcup_mask = 0xffffffff,
- .gpcup_reg = S3C2410_GPCUP,
-
- .gpdcon = 0xaa95aaa1,
- .gpdcon_mask = 0xffc0fff0,
- .gpdcon_reg = S3C2410_GPDCON,
- .gpdup = 0x0000faff,
- .gpdup_mask = 0xffffffff,
- .gpdup_reg = S3C2410_GPDUP,
-};
-
-static struct mtd_partition __initdata rx3715_nand_part[] = {
- [0] = {
- .name = "Whole Flash",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
- [0] = {
- .name = "Internal",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(rx3715_nand_part),
- .partitions = rx3715_nand_part,
- },
-};
-
-static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
- .tacls = 25,
- .twrph0 = 50,
- .twrph1 = 15,
- .nr_sets = ARRAY_SIZE(rx3715_nand_sets),
- .sets = rx3715_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-static struct platform_device *rx3715_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_nand,
-};
-
-static void __init rx3715_map_io(void)
-{
- s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
- s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init rx3715_init_time(void)
-{
- s3c2440_init_clocks(16934000);
- samsung_timer_init();
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init rx3715_reserve(void)
-{
- memblock_reserve(0x30003000, 0x1000);
- memblock_reserve(0x30081000, 0x1000);
-}
-
-static void __init rx3715_init_machine(void)
-{
-#ifdef CONFIG_PM_H1940
- memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
-#endif
- s3c_pm_init();
-
- s3c_nand_set_platdata(&rx3715_nand_info);
- s3c24xx_fb_set_platdata(&rx3715_fb_info);
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
- platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
-}
-
-MACHINE_START(RX3715, "IPAQ-RX3715")
- /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .atag_offset = 0x100,
- .map_io = rx3715_map_io,
- .reserve = rx3715_reserve,
- .init_irq = s3c2440_init_irq,
- .init_machine = rx3715_init_machine,
- .init_time = rx3715_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Samsung's S3C2416 flattened device tree enabled machine
-//
-// Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
-//
-// based on mach-exynos/mach-exynos4-dt.c
-//
-// Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
-// http://www.samsung.com
-// Copyright (c) 2010-2011 Linaro Ltd.
-// www.linaro.org
-
-#include <linux/clocksource.h>
-#include <linux/irqchip.h>
-#include <linux/serial_s3c.h>
-
-#include <asm/mach/arch.h>
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include "common.h"
-
-static void __init s3c2416_dt_map_io(void)
-{
- s3c24xx_init_io(NULL, 0);
-}
-
-static void __init s3c2416_dt_machine_init(void)
-{
- s3c_pm_init();
-}
-
-static const char *const s3c2416_dt_compat[] __initconst = {
- "samsung,s3c2416",
- "samsung,s3c2450",
- NULL
-};
-
-DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
- /* Maintainer: Heiko Stuebner <heiko@sntech.de> */
- .dt_compat = s3c2416_dt_compat,
- .map_io = s3c2416_dt_map_io,
- .init_irq = irqchip_init,
- .init_machine = s3c2416_dt_machine_init,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2004 by FS Forth-Systeme GmbH
-// All rights reserved.
-//
-// @Author: Jonas Dietsche
-//
-// @History:
-// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-#include "common-smdk.h"
-
-static struct map_desc smdk2410_iodesc[] __initdata = {
- /* nothing here yet */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- }
-};
-
-static struct platform_device *smdk2410_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
-};
-
-static void __init smdk2410_map_io(void)
-{
- s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
- s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init smdk2410_init_time(void)
-{
- s3c2410_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void __init smdk2410_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
- smdk_machine_init();
-}
-
-MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
- * to SMDK2410 */
- /* Maintainer: Jonas Dietsche */
- .atag_offset = 0x100,
- .map_io = smdk2410_map_io,
- .init_irq = s3c2410_init_irq,
- .init_machine = smdk2410_init,
- .init_time = smdk2410_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the
-// loans of SMDK2413 to work with.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/memblock.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include <mach/regs-gpio.h>
-
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-#include "common-smdk.h"
-
-static struct map_desc smdk2413_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- /* IR port */
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x43,
- .ufcon = 0x51,
- }
-};
-
-
-static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
- .pullup_pin = S3C2410_GPF(2),
-};
-
-
-static struct platform_device *smdk2413_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_usbgadget,
- &s3c2412_device_dma,
-};
-
-static void __init smdk2413_fixup(struct tag *tags, char **cmdline)
-{
- if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
- memblock_add(0x30000000, SZ_64M);
- }
-}
-
-static void __init smdk2413_map_io(void)
-{
- s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
- s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init smdk2413_init_time(void)
-{
- s3c2412_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void __init smdk2413_machine_init(void)
-{ /* Turn off suspend on both USB ports, and switch the
- * selectable USB port to USB device mode. */
-
- s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
- S3C2410_MISCCR_USBSUSPND0 |
- S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-
- s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
- s3c_i2c0_set_platdata(NULL);
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
- platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
- smdk_machine_init();
-}
-
-MACHINE_START(S3C2413, "S3C2413")
- /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .atag_offset = 0x100,
-
- .fixup = smdk2413_fixup,
- .init_irq = s3c2412_init_irq,
- .map_io = smdk2413_map_io,
- .init_machine = smdk2413_machine_init,
- .init_time = samsung_timer_init,
-MACHINE_END
-
-MACHINE_START(SMDK2412, "SMDK2412")
- /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .atag_offset = 0x100,
-
- .fixup = smdk2413_fixup,
- .init_irq = s3c2412_init_irq,
- .map_io = smdk2413_map_io,
- .init_machine = smdk2413_machine_init,
- .init_time = samsung_timer_init,
-MACHINE_END
-
-MACHINE_START(SMDK2413, "SMDK2413")
- /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .atag_offset = 0x100,
-
- .fixup = smdk2413_fixup,
- .init_irq = s3c2412_init_irq,
- .map_io = smdk2413_map_io,
- .init_machine = smdk2413_machine_init,
- .init_time = smdk2413_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
-// as part of OpenInkpot project
-// Copyright (c) 2009 Promwad Innovation Company
-// Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <video/samsung_fimd.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-s3c2443-clock.h>
-#include <mach/gpio-samsung.h>
-
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/sdhci.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/s3c-hsudc.h>
-
-#include <plat/fb.h>
-
-#include "common.h"
-#include "common-smdk.h"
-
-static struct map_desc smdk2416_iodesc[] __initdata = {
- /* ISA IO Space map (memory space selected by A24) */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(S3C2410_CS2),
- .length = 0x10000,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
- .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
- .length = SZ_4M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(S3C2410_CS2),
- .length = 0x10000,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
- .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
- .length = SZ_4M,
- .type = MT_DEVICE,
- }
-};
-
-#define UCON (S3C2410_UCON_DEFAULT | \
- S3C2440_UCON_PCLK | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-
-#define UFCON (S3C2410_UFCON_RXTRIG8 | \
- S3C2410_UFCON_FIFOMODE | \
- S3C2440_UFCON_TXTRIG16)
-
-static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- /* IR port */
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON | 0x50,
- .ufcon = UFCON,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- }
-};
-
-static void smdk2416_hsudc_gpio_init(void)
-{
- s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(1));
- s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 0);
-}
-
-static void smdk2416_hsudc_gpio_uninit(void)
-{
- s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 1);
- s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_NONE);
- s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(0));
-}
-
-static struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = {
- .epnum = 9,
- .gpio_init = smdk2416_hsudc_gpio_init,
- .gpio_uninit = smdk2416_hsudc_gpio_uninit,
-};
-
-static struct s3c_fb_pd_win smdk2416_fb_win[] = {
- [0] = {
- .default_bpp = 16,
- .max_bpp = 32,
- .xres = 800,
- .yres = 480,
- },
-};
-
-static struct fb_videomode smdk2416_lcd_timing = {
- .pixclock = 41094,
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
-};
-
-static void s3c2416_fb_gpio_setup_24bpp(void)
-{
- unsigned int gpio;
-
- for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-}
-
-static struct s3c_fb_platdata smdk2416_fb_platdata = {
- .win[0] = &smdk2416_fb_win[0],
- .vtiming = &smdk2416_lcd_timing,
- .setup_gpio = s3c2416_fb_gpio_setup_24bpp,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static struct s3c_sdhci_platdata smdk2416_hsmmc0_pdata __initdata = {
- .max_width = 4,
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = S3C2410_GPF(1),
- .ext_cd_gpio_invert = 1,
-};
-
-static struct s3c_sdhci_platdata smdk2416_hsmmc1_pdata __initdata = {
- .max_width = 4,
- .cd_type = S3C_SDHCI_CD_NONE,
-};
-
-static struct platform_device *smdk2416_devices[] __initdata = {
- &s3c_device_fb,
- &s3c_device_wdt,
- &s3c_device_ohci,
- &s3c_device_i2c0,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_usb_hsudc,
- &s3c2443_device_dma,
-};
-
-static void __init smdk2416_init_time(void)
-{
- s3c2416_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void __init smdk2416_map_io(void)
-{
- s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
- s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init smdk2416_machine_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- s3c_fb_set_platdata(&smdk2416_fb_platdata);
-
- s3c_sdhci0_set_platdata(&smdk2416_hsmmc0_pdata);
- s3c_sdhci1_set_platdata(&smdk2416_hsmmc1_pdata);
-
- s3c24xx_hsudc_set_platdata(&smdk2416_hsudc_platdata);
-
- gpio_request(S3C2410_GPB(4), "USBHost Power");
- gpio_direction_output(S3C2410_GPB(4), 1);
-
- gpio_request(S3C2410_GPB(3), "Display Power");
- gpio_direction_output(S3C2410_GPB(3), 1);
-
- gpio_request(S3C2410_GPB(1), "Display Reset");
- gpio_direction_output(S3C2410_GPB(1), 1);
-
- platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices));
- smdk_machine_init();
-}
-
-MACHINE_START(SMDK2416, "SMDK2416")
- /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
- .atag_offset = 0x100,
-
- .init_irq = s3c2416_init_irq,
- .map_io = smdk2416_map_io,
- .init_machine = smdk2416_machine_init,
- .init_time = smdk2416_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-// linux/arch/arm/mach-s3c2440/mach-smdk2440.c
-//
-// Copyright (c) 2004-2005 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.fluff.org/ben/smdk2440/
-//
-// Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-#include "common-smdk.h"
-
-static struct map_desc smdk2440_iodesc[] __initdata = {
- /* ISA IO Space map (memory space selected by A24) */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(S3C2410_CS2),
- .length = 0x10000,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
- .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
- .length = SZ_4M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(S3C2410_CS2),
- .length = 0x10000,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
- .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
- .length = SZ_4M,
- .type = MT_DEVICE,
- }
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- /* IR port */
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x43,
- .ufcon = 0x51,
- }
-};
-
-/* LCD driver info */
-
-static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {
-
- .lcdcon5 = S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_INVVFRAME |
- S3C2410_LCDCON5_PWREN |
- S3C2410_LCDCON5_HWSWP,
-
- .type = S3C2410_LCDCON1_TFT,
-
- .width = 240,
- .height = 320,
-
- .pixclock = 166667, /* HCLK 60 MHz, divisor 10 */
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .left_margin = 20,
- .right_margin = 8,
- .hsync_len = 4,
- .upper_margin = 8,
- .lower_margin = 7,
- .vsync_len = 4,
-};
-
-static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
- .displays = &smdk2440_lcd_cfg,
- .num_displays = 1,
- .default_display = 0,
-
-#if 0
- /* currently setup by downloader */
- .gpccon = 0xaa940659,
- .gpccon_mask = 0xffffffff,
- .gpcup = 0x0000ffff,
- .gpcup_mask = 0xffffffff,
- .gpdcon = 0xaa84aaa0,
- .gpdcon_mask = 0xffffffff,
- .gpdup = 0x0000faff,
- .gpdup_mask = 0xffffffff,
-
- .gpccon_reg = S3C2410_GPCCON,
- .gpcup_reg = S3C2410_GPCUP,
- .gpdcon_reg = S3C2410_GPDCON,
- .gpdup_reg = S3C2410_GPDUP,
-#endif
-
- .lpcsel = ((0xCE6) & ~7) | 1<<4,
-};
-
-static struct platform_device *smdk2440_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
-};
-
-static void __init smdk2440_map_io(void)
-{
- s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
- s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init smdk2440_init_time(void)
-{
- s3c2440_init_clocks(16934400);
- samsung_timer_init();
-}
-
-static void __init smdk2440_machine_init(void)
-{
- s3c24xx_fb_set_platdata(&smdk2440_fb_info);
- s3c_i2c0_set_platdata(NULL);
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
- platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
- smdk_machine_init();
-}
-
-MACHINE_START(S3C2440, "SMDK2440")
- /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .atag_offset = 0x100,
-
- .init_irq = s3c2440_init_irq,
- .map_io = smdk2440_map_io,
- .init_machine = smdk2440_machine_init,
- .init_time = smdk2440_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2007 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.fluff.org/ben/smdk2443/
-//
-// Thanks to Samsung for the loan of an SMDK2443
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-#include "common-smdk.h"
-
-static struct map_desc smdk2443_iodesc[] __initdata = {
- /* ISA IO Space map (memory space selected by A24) */
-
- {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = __phys_to_pfn(S3C2410_CS2),
- .length = 0x10000,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
- .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
- .length = SZ_4M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = __phys_to_pfn(S3C2410_CS2),
- .length = 0x10000,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
- .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
- .length = SZ_4M,
- .type = MT_DEVICE,
- }
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- /* IR port */
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x43,
- .ufcon = 0x51,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- }
-};
-
-static struct platform_device *smdk2443_devices[] __initdata = {
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_hsmmc1,
- &s3c2443_device_dma,
-};
-
-static void __init smdk2443_map_io(void)
-{
- s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
- s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init smdk2443_init_time(void)
-{
- s3c2443_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void __init smdk2443_machine_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
- smdk_machine_init();
-}
-
-MACHINE_START(SMDK2443, "SMDK2443")
- /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .atag_offset = 0x100,
-
- .init_irq = s3c2443_init_irq,
- .map_io = smdk2443_map_io,
- .init_machine = smdk2443_machine_init,
- .init_time = smdk2443_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2007 TinCanTools
-// David Anders <danders@amltd.com>
-//
-// @History:
-// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-
-#include "common.h"
-
-static struct resource tct_hammer_nor_resource =
- DEFINE_RES_MEM(0x00000000, SZ_16M);
-
-static struct mtd_partition tct_hammer_mtd_partitions[] = {
- {
- .name = "System",
- .size = 0x240000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- .name = "JFFS2",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND,
- }
-};
-
-static struct physmap_flash_data tct_hammer_flash_data = {
- .width = 2,
- .parts = tct_hammer_mtd_partitions,
- .nr_parts = ARRAY_SIZE(tct_hammer_mtd_partitions),
-};
-
-static struct platform_device tct_hammer_device_nor = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &tct_hammer_flash_data,
- },
- .num_resources = 1,
- .resource = &tct_hammer_nor_resource,
-};
-
-static struct map_desc tct_hammer_iodesc[] __initdata = {
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- }
-};
-
-static struct gpiod_lookup_table tct_hammer_mmc_gpio_table = {
- .dev_id = "s3c2410-sdi",
- .table = {
- /* bus pins */
- GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct platform_device *tct_hammer_devices[] __initdata = {
- &s3c_device_adc,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_ohci,
- &s3c_device_rtc,
- &s3c_device_usbgadget,
- &s3c_device_sdi,
- &tct_hammer_device_nor,
-};
-
-static void __init tct_hammer_map_io(void)
-{
- s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
- s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init tct_hammer_init_time(void)
-{
- s3c2410_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void __init tct_hammer_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- gpiod_add_lookup_table(&tct_hammer_mmc_gpio_table);
- platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
-}
-
-MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
- .atag_offset = 0x100,
- .map_io = tct_hammer_map_io,
- .init_irq = s3c2410_init_irq,
- .init_machine = tct_hammer_init,
- .init_time = tct_hammer_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Machine support for Thorcom VR1000 board. Designed for Thorcom by
-// Simtec Electronics, http://www.simtec.co.uk/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/dm9000.h>
-#include <linux/i2c.h>
-
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-
-#include "bast.h"
-#include "common.h"
-#include "simtec.h"
-#include "vr1000.h"
-
-/* macros for virtual address mods for the io space entries */
-#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
-#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
-#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
-#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
-
-/* macros to modify the physical addresses for io space */
-
-#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
-#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
-#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
-#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
-
-static struct map_desc vr1000_iodesc[] __initdata = {
- /* ISA IO areas */
- {
- .virtual = (u32)S3C24XX_VA_ISA_BYTE,
- .pfn = PA_CS2(BAST_PA_ISAIO),
- .length = SZ_16M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)S3C24XX_VA_ISA_WORD,
- .pfn = PA_CS3(BAST_PA_ISAIO),
- .length = SZ_16M,
- .type = MT_DEVICE,
- },
-
- /* CPLD control registers, and external interrupt controls */
- {
- .virtual = (u32)VR1000_VA_CTRL1,
- .pfn = __phys_to_pfn(VR1000_PA_CTRL1),
- .length = SZ_1M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)VR1000_VA_CTRL2,
- .pfn = __phys_to_pfn(VR1000_PA_CTRL2),
- .length = SZ_1M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)VR1000_VA_CTRL3,
- .pfn = __phys_to_pfn(VR1000_PA_CTRL3),
- .length = SZ_1M,
- .type = MT_DEVICE,
- }, {
- .virtual = (u32)VR1000_VA_CTRL4,
- .pfn = __phys_to_pfn(VR1000_PA_CTRL4),
- .length = SZ_1M,
- .type = MT_DEVICE,
- },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- /* port 2 is not actually used */
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- }
-};
-
-/* definitions for the vr1000 extra 16550 serial ports */
-
-#define VR1000_BAUDBASE (3692307)
-
-#define VR1000_SERIAL_MAPBASE(x) (VR1000_PA_SERIAL + 0x80 + ((x) << 5))
-
-static struct plat_serial8250_port serial_platform_data[] = {
- [0] = {
- .mapbase = VR1000_SERIAL_MAPBASE(0),
- .irq = VR1000_IRQ_SERIAL + 0,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = VR1000_BAUDBASE,
- },
- [1] = {
- .mapbase = VR1000_SERIAL_MAPBASE(1),
- .irq = VR1000_IRQ_SERIAL + 1,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = VR1000_BAUDBASE,
- },
- [2] = {
- .mapbase = VR1000_SERIAL_MAPBASE(2),
- .irq = VR1000_IRQ_SERIAL + 2,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = VR1000_BAUDBASE,
- },
- [3] = {
- .mapbase = VR1000_SERIAL_MAPBASE(3),
- .irq = VR1000_IRQ_SERIAL + 3,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = VR1000_BAUDBASE,
- },
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-/* DM9000 ethernet devices */
-
-static struct resource vr1000_dm9k0_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4),
- [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40),
- [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000A, 1, NULL, IORESOURCE_IRQ \
- | IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-static struct resource vr1000_dm9k1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4),
- [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40),
- [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000N, 1, NULL, IORESOURCE_IRQ \
- | IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-/* for the moment we limit ourselves to 16bit IO until some
- * better IO routines can be written and tested
-*/
-
-static struct dm9000_plat_data vr1000_dm9k_platdata = {
- .flags = DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device vr1000_dm9k0 = {
- .name = "dm9000",
- .id = 0,
- .num_resources = ARRAY_SIZE(vr1000_dm9k0_resource),
- .resource = vr1000_dm9k0_resource,
- .dev = {
- .platform_data = &vr1000_dm9k_platdata,
- }
-};
-
-static struct platform_device vr1000_dm9k1 = {
- .name = "dm9000",
- .id = 1,
- .num_resources = ARRAY_SIZE(vr1000_dm9k1_resource),
- .resource = vr1000_dm9k1_resource,
- .dev = {
- .platform_data = &vr1000_dm9k_platdata,
- }
-};
-
-/* LEDS */
-
-static struct gpiod_lookup_table vr1000_led1_gpio_table = {
- .dev_id = "s3c24xx_led.1",
- .table = {
- GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct gpiod_lookup_table vr1000_led2_gpio_table = {
- .dev_id = "s3c24xx_led.2",
- .table = {
- GPIO_LOOKUP("GPB", 1, NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct gpiod_lookup_table vr1000_led3_gpio_table = {
- .dev_id = "s3c24xx_led.3",
- .table = {
- GPIO_LOOKUP("GPB", 2, NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct s3c24xx_led_platdata vr1000_led1_pdata = {
- .name = "led1",
- .def_trigger = "",
-};
-
-static struct s3c24xx_led_platdata vr1000_led2_pdata = {
- .name = "led2",
- .def_trigger = "",
-};
-
-static struct s3c24xx_led_platdata vr1000_led3_pdata = {
- .name = "led3",
- .def_trigger = "",
-};
-
-static struct platform_device vr1000_led1 = {
- .name = "s3c24xx_led",
- .id = 1,
- .dev = {
- .platform_data = &vr1000_led1_pdata,
- },
-};
-
-static struct platform_device vr1000_led2 = {
- .name = "s3c24xx_led",
- .id = 2,
- .dev = {
- .platform_data = &vr1000_led2_pdata,
- },
-};
-
-static struct platform_device vr1000_led3 = {
- .name = "s3c24xx_led",
- .id = 3,
- .dev = {
- .platform_data = &vr1000_led3_pdata,
- },
-};
-
-/* I2C devices. */
-
-static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- }, {
- I2C_BOARD_INFO("tmp101", 0x48),
- }, {
- I2C_BOARD_INFO("m41st87", 0x68),
- },
-};
-
-/* devices for this board */
-
-static struct platform_device *vr1000_devices[] __initdata = {
- &s3c2410_device_dclk,
- &s3c_device_ohci,
- &s3c_device_lcd,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_adc,
- &serial_device,
- &vr1000_dm9k0,
- &vr1000_dm9k1,
- &vr1000_led1,
- &vr1000_led2,
- &vr1000_led3,
-};
-
-static void vr1000_power_off(void)
-{
- gpio_direction_output(S3C2410_GPB(9), 1);
-}
-
-static void __init vr1000_map_io(void)
-{
- pm_power_off = vr1000_power_off;
-
- s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
- s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init vr1000_init_time(void)
-{
- s3c2410_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void __init vr1000_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
-
- /* Disable pull-up on LED lines and register GPIO lookups */
- s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPB(2), S3C_GPIO_PULL_NONE);
- gpiod_add_lookup_table(&vr1000_led1_gpio_table);
- gpiod_add_lookup_table(&vr1000_led2_gpio_table);
- gpiod_add_lookup_table(&vr1000_led3_gpio_table);
-
- platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
-
- i2c_register_board_info(0, vr1000_i2c_devs,
- ARRAY_SIZE(vr1000_i2c_devs));
-
- nor_simtec_init();
- simtec_audio_add(NULL, true, NULL);
-
- WARN_ON(gpio_request(S3C2410_GPB(9), "power off"));
-}
-
-MACHINE_START(VR1000, "Thorcom-VR1000")
- /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .atag_offset = 0x100,
- .map_io = vr1000_map_io,
- .init_machine = vr1000_init,
- .init_irq = s3c2410_init_irq,
- .init_time = vr1000_init_time,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// (C) 2006 Thomas Gleixner <tglx@linutronix.de>
-//
-// Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-#include <linux/memblock.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-
-static struct map_desc vstms_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- }
-};
-
-static struct mtd_partition __initdata vstms_nand_part[] = {
- [0] = {
- .name = "Boot Agent",
- .size = 0x7C000,
- .offset = 0,
- },
- [1] = {
- .name = "UBoot Config",
- .offset = 0x7C000,
- .size = 0x4000,
- },
- [2] = {
- .name = "Kernel",
- .offset = 0x80000,
- .size = 0x200000,
- },
- [3] = {
- .name = "RFS",
- .offset = 0x280000,
- .size = 0x3d80000,
- },
-};
-
-static struct s3c2410_nand_set __initdata vstms_nand_sets[] = {
- [0] = {
- .name = "NAND",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(vstms_nand_part),
- .partitions = vstms_nand_part,
- },
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
-*/
-
-static struct s3c2410_platform_nand __initdata vstms_nand_info = {
- .tacls = 20,
- .twrph0 = 60,
- .twrph1 = 20,
- .nr_sets = ARRAY_SIZE(vstms_nand_sets),
- .sets = vstms_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-static struct platform_device *vstms_devices[] __initdata = {
- &s3c_device_ohci,
- &s3c_device_wdt,
- &s3c_device_i2c0,
- &s3c_device_iis,
- &s3c_device_rtc,
- &s3c_device_nand,
- &s3c2412_device_dma,
-};
-
-static void __init vstms_fixup(struct tag *tags, char **cmdline)
-{
- if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
- memblock_add(0x30000000, SZ_64M);
- }
-}
-
-static void __init vstms_map_io(void)
-{
- s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
- s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init vstms_init_time(void)
-{
- s3c2412_init_clocks(12000000);
- samsung_timer_init();
-}
-
-static void __init vstms_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- s3c_nand_set_platdata(&vstms_nand_info);
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
- platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
-}
-
-MACHINE_START(VSTMS, "VSTMS")
- .atag_offset = 0x100,
-
- .fixup = vstms_fixup,
- .init_irq = s3c2412_init_irq,
- .init_machine = vstms_init,
- .map_io = vstms_map_io,
- .init_time = vstms_init_time,
-MACHINE_END
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S3C - Nand Controller core functions
- */
-
-#ifndef __ASM_ARCH_NAND_CORE_H
-#define __ASM_ARCH_NAND_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_nand_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_NAND
- s3c_device_nand.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_NAND_CORE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - CPLD control constants
- * OSIRIS - Memory map definitions
- */
-
-#ifndef __MACH_S3C24XX_OSIRIS_H
-#define __MACH_S3C24XX_OSIRIS_H __FILE__
-
-/* CTRL0 - NAND WP control */
-
-#define OSIRIS_CTRL0_NANDSEL (0x3)
-#define OSIRIS_CTRL0_BOOT_INT (1<<3)
-#define OSIRIS_CTRL0_PCMCIA (1<<4)
-#define OSIRIS_CTRL0_FIX8 (1<<5)
-#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6)
-#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7)
-
-#define OSIRIS_CTRL1_FIX8 (1<<0)
-
-#define OSIRIS_ID_REVMASK (0x7)
-
-/* start peripherals off after the S3C2410 */
-
-#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x04000000))
-
-#define OSIRIS_PA_CPLD (S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define OSIRIS_VA_CTRL0 OSIRIS_IOADDR(0x00000000)
-#define OSIRIS_PA_CTRL0 (OSIRIS_PA_CPLD)
-
-#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00100000)
-#define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD + (1<<23))
-
-#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00200000)
-#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00300000)
-#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000)
-#define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23))
-
-#endif /* __MACH_S3C24XX_OSIRIS_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * (c) 2005 Guillaume GOURAT / NexVision
- * guillaume.gourat@nexvision.fr
- *
- * NexVision OTOM board memory map definitions
- */
-
-/*
- * ok, we've used up to 0x01300000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space.
- */
-
-#ifndef __MACH_S3C24XX_OTOM_H
-#define __MACH_S3C24XX_OTOM_H __FILE__
-
-#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */
-#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */
-
-/* physical offset addresses for the peripherals */
-
-#define OTOM_PA_FLASH0_BASE (S3C2410_CS0)
-
-#endif /* __MACH_S3C24XX_OTOM_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2006-2007 Simtec Electronics
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>
-// Vincent Sanders <vince@arm.linux.org.uk>
-//
-// S3C2410 CPU PLL tables
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-/* This array should be sorted in ascending order of the frequencies */
-static struct cpufreq_frequency_table pll_vals_12MHz[] = {
- { .frequency = 34000000, .driver_data = PLLVAL(82, 2, 3), },
- { .frequency = 45000000, .driver_data = PLLVAL(82, 1, 3), },
- { .frequency = 48000000, .driver_data = PLLVAL(120, 2, 3), },
- { .frequency = 51000000, .driver_data = PLLVAL(161, 3, 3), },
- { .frequency = 56000000, .driver_data = PLLVAL(142, 2, 3), },
- { .frequency = 68000000, .driver_data = PLLVAL(82, 2, 2), },
- { .frequency = 79000000, .driver_data = PLLVAL(71, 1, 2), },
- { .frequency = 85000000, .driver_data = PLLVAL(105, 2, 2), },
- { .frequency = 90000000, .driver_data = PLLVAL(112, 2, 2), },
- { .frequency = 101000000, .driver_data = PLLVAL(127, 2, 2), },
- { .frequency = 113000000, .driver_data = PLLVAL(105, 1, 2), },
- { .frequency = 118000000, .driver_data = PLLVAL(150, 2, 2), },
- { .frequency = 124000000, .driver_data = PLLVAL(116, 1, 2), },
- { .frequency = 135000000, .driver_data = PLLVAL(82, 2, 1), },
- { .frequency = 147000000, .driver_data = PLLVAL(90, 2, 1), },
- { .frequency = 152000000, .driver_data = PLLVAL(68, 1, 1), },
- { .frequency = 158000000, .driver_data = PLLVAL(71, 1, 1), },
- { .frequency = 170000000, .driver_data = PLLVAL(77, 1, 1), },
- { .frequency = 180000000, .driver_data = PLLVAL(82, 1, 1), },
- { .frequency = 186000000, .driver_data = PLLVAL(85, 1, 1), },
- { .frequency = 192000000, .driver_data = PLLVAL(88, 1, 1), },
- { .frequency = 203000000, .driver_data = PLLVAL(161, 3, 1), },
-
- /* 2410A extras */
-
- { .frequency = 210000000, .driver_data = PLLVAL(132, 2, 1), },
- { .frequency = 226000000, .driver_data = PLLVAL(105, 1, 1), },
- { .frequency = 266000000, .driver_data = PLLVAL(125, 1, 1), },
- { .frequency = 268000000, .driver_data = PLLVAL(126, 1, 1), },
- { .frequency = 270000000, .driver_data = PLLVAL(127, 1, 1), },
-};
-
-static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
-{
- return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
-}
-
-static struct subsys_interface s3c2410_plls_interface = {
- .name = "s3c2410_plls",
- .subsys = &s3c2410_subsys,
- .add_dev = s3c2410_plls_add,
-};
-
-static int __init s3c2410_pll_init(void)
-{
- return subsys_interface_register(&s3c2410_plls_interface);
-
-}
-arch_initcall(s3c2410_pll_init);
-
-static struct subsys_interface s3c2410a_plls_interface = {
- .name = "s3c2410a_plls",
- .subsys = &s3c2410a_subsys,
- .add_dev = s3c2410_plls_add,
-};
-
-static int __init s3c2410a_pll_init(void)
-{
- return subsys_interface_register(&s3c2410a_plls_interface);
-}
-arch_initcall(s3c2410a_pll_init);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2007 Simtec Electronics
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>
-// Vincent Sanders <vince@arm.linux.org.uk>
-//
-// S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-/* This array should be sorted in ascending order of the frequencies */
-static struct cpufreq_frequency_table s3c2440_plls_12[] = {
- { .frequency = 75000000, .driver_data = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */
- { .frequency = 80000000, .driver_data = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */
- { .frequency = 90000000, .driver_data = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */
- { .frequency = 100000000, .driver_data = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */
- { .frequency = 110000000, .driver_data = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */
- { .frequency = 120000000, .driver_data = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */
- { .frequency = 150000000, .driver_data = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */
- { .frequency = 160000000, .driver_data = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */
- { .frequency = 170000000, .driver_data = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */
- { .frequency = 180000000, .driver_data = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */
- { .frequency = 190000000, .driver_data = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */
- { .frequency = 200000000, .driver_data = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */
- { .frequency = 210000000, .driver_data = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */
- { .frequency = 220000000, .driver_data = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */
- { .frequency = 230000000, .driver_data = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */
- { .frequency = 240000000, .driver_data = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */
- { .frequency = 300000000, .driver_data = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */
- { .frequency = 310000000, .driver_data = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */
- { .frequency = 320000000, .driver_data = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */
- { .frequency = 330000000, .driver_data = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */
- { .frequency = 340000000, .driver_data = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */
- { .frequency = 350000000, .driver_data = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */
- { .frequency = 360000000, .driver_data = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */
- { .frequency = 370000000, .driver_data = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */
- { .frequency = 380000000, .driver_data = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */
- { .frequency = 390000000, .driver_data = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */
- { .frequency = 400000000, .driver_data = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */
-};
-
-static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif)
-{
- struct clk *xtal_clk;
- unsigned long xtal;
-
- xtal_clk = clk_get(NULL, "xtal");
- if (IS_ERR(xtal_clk))
- return PTR_ERR(xtal_clk);
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- if (xtal == 12000000) {
- printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
- return s3c_plltab_register(s3c2440_plls_12,
- ARRAY_SIZE(s3c2440_plls_12));
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_plls12_interface = {
- .name = "s3c2440_plls12",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_plls12_add,
-};
-
-static int __init s3c2440_pll_12mhz(void)
-{
- return subsys_interface_register(&s3c2440_plls12_interface);
-
-}
-arch_initcall(s3c2440_pll_12mhz);
-
-static struct subsys_interface s3c2442_plls12_interface = {
- .name = "s3c2442_plls12",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c2440_plls12_add,
-};
-
-static int __init s3c2442_pll_12mhz(void)
-{
- return subsys_interface_register(&s3c2442_plls12_interface);
-
-}
-arch_initcall(s3c2442_pll_12mhz);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2008 Simtec Electronics
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>
-// Vincent Sanders <vince@arm.linux.org.uk>
-//
-// S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-/* This array should be sorted in ascending order of the frequencies */
-static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
- { .frequency = 78019200, .driver_data = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */
- { .frequency = 84067200, .driver_data = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */
- { .frequency = 90115200, .driver_data = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */
- { .frequency = 96163200, .driver_data = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */
- { .frequency = 102135600, .driver_data = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */
- { .frequency = 108259200, .driver_data = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */
- { .frequency = 114307200, .driver_data = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */
- { .frequency = 120234240, .driver_data = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */
- { .frequency = 126161280, .driver_data = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */
- { .frequency = 132088320, .driver_data = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */
- { .frequency = 138015360, .driver_data = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */
- { .frequency = 144789120, .driver_data = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */
- { .frequency = 150100363, .driver_data = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */
- { .frequency = 156038400, .driver_data = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */
- { .frequency = 162086400, .driver_data = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */
- { .frequency = 168134400, .driver_data = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */
- { .frequency = 174048000, .driver_data = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */
- { .frequency = 180230400, .driver_data = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */
- { .frequency = 186278400, .driver_data = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */
- { .frequency = 192326400, .driver_data = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */
- { .frequency = 198132480, .driver_data = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */
- { .frequency = 204271200, .driver_data = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */
- { .frequency = 210268800, .driver_data = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */
- { .frequency = 216518400, .driver_data = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */
- { .frequency = 222264000, .driver_data = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */
- { .frequency = 228614400, .driver_data = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */
- { .frequency = 234259200, .driver_data = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */
- { .frequency = 240468480, .driver_data = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */
- { .frequency = 246960000, .driver_data = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */
- { .frequency = 252322560, .driver_data = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */
- { .frequency = 258249600, .driver_data = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */
- { .frequency = 264176640, .driver_data = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */
- { .frequency = 270950400, .driver_data = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */
- { .frequency = 276030720, .driver_data = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */
- { .frequency = 282240000, .driver_data = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */
- { .frequency = 289578240, .driver_data = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */
- { .frequency = 294235200, .driver_data = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */
- { .frequency = 300200727, .driver_data = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */
- { .frequency = 306358690, .driver_data = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */
- { .frequency = 312076800, .driver_data = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */
- { .frequency = 318366720, .driver_data = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */
- { .frequency = 324172800, .driver_data = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */
- { .frequency = 330220800, .driver_data = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */
- { .frequency = 336268800, .driver_data = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */
- { .frequency = 342074880, .driver_data = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */
- { .frequency = 348096000, .driver_data = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */
- { .frequency = 355622400, .driver_data = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */
- { .frequency = 360460800, .driver_data = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */
- { .frequency = 366206400, .driver_data = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */
- { .frequency = 372556800, .driver_data = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */
- { .frequency = 378201600, .driver_data = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */
- { .frequency = 384652800, .driver_data = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */
- { .frequency = 391608000, .driver_data = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */
- { .frequency = 396264960, .driver_data = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */
- { .frequency = 402192000, .driver_data = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */
-};
-
-static int s3c2440_plls169344_add(struct device *dev,
- struct subsys_interface *sif)
-{
- struct clk *xtal_clk;
- unsigned long xtal;
-
- xtal_clk = clk_get(NULL, "xtal");
- if (IS_ERR(xtal_clk))
- return PTR_ERR(xtal_clk);
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- if (xtal == 169344000) {
- printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
- return s3c_plltab_register(s3c2440_plls_169344,
- ARRAY_SIZE(s3c2440_plls_169344));
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_plls169344_interface = {
- .name = "s3c2440_plls169344",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_plls169344_add,
-};
-
-static int __init s3c2440_pll_16934400(void)
-{
- return subsys_interface_register(&s3c2440_plls169344_interface);
-}
-arch_initcall(s3c2440_pll_16934400);
-
-static struct subsys_interface s3c2442_plls169344_interface = {
- .name = "s3c2442_plls169344",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c2440_plls169344_add,
-};
-
-static int __init s3c2442_pll_16934400(void)
-{
- return subsys_interface_register(&s3c2442_plls169344_interface);
-}
-arch_initcall(s3c2442_pll_16934400);
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * H1940 Suspend to RAM
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/map.h>
-
-#include <mach/regs-gpio.h>
-
- .text
- .global h1940_pm_return
-
-h1940_pm_return:
- mov r0, #S3C2410_PA_GPIO
- ldr pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO]
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2006 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include "h1940.h"
-
-static void s3c2410_pm_prepare(void)
-{
- /* ensure at least GSTATUS3 has the resume address */
-
- __raw_writel(__pa_symbol(s3c_cpu_resume), S3C2410_GSTATUS3);
-
- S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
- S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-
- if (machine_is_h1940()) {
- void *base = phys_to_virt(H1940_SUSPEND_CHECK);
- unsigned long ptr;
- unsigned long calc = 0;
-
- /* generate check for the bootloader to check on resume */
-
- for (ptr = 0; ptr < 0x40000; ptr += 0x400)
- calc += __raw_readl(base+ptr);
-
- __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
- }
-
- /* RX3715 and RX1950 use similar to H1940 code and the
- * same offsets for resume and checksum pointers */
-
- if (machine_is_rx3715() || machine_is_rx1950()) {
- void *base = phys_to_virt(H1940_SUSPEND_CHECK);
- unsigned long ptr;
- unsigned long calc = 0;
-
- /* generate check for the bootloader to check on resume */
-
- for (ptr = 0; ptr < 0x40000; ptr += 0x4)
- calc += __raw_readl(base+ptr);
-
- __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
- }
-
- if (machine_is_aml_m5900()) {
- gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL);
- gpio_free(S3C2410_GPF(2));
- }
-
- if (machine_is_rx1950()) {
- /* According to S3C2442 user's manual, page 7-17,
- * when the system is operating in NAND boot mode,
- * the hardware pin configuration - EINT[23:21] –
- * must be set as input for starting up after
- * wakeup from sleep mode
- */
- s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT);
- }
-}
-
-static void s3c2410_pm_resume(void)
-{
- unsigned long tmp;
-
- /* unset the return-from-sleep flag, to ensure reset */
-
- tmp = __raw_readl(S3C2410_GSTATUS2);
- tmp &= S3C2410_GSTATUS2_OFFRESET;
- __raw_writel(tmp, S3C2410_GSTATUS2);
-
- if (machine_is_aml_m5900()) {
- gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
- gpio_free(S3C2410_GPF(2));
- }
-}
-
-struct syscore_ops s3c2410_pm_syscore_ops = {
- .resume = s3c2410_pm_resume,
-};
-
-static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
-{
- pm_cpu_prep = s3c2410_pm_prepare;
- pm_cpu_sleep = s3c2410_cpu_suspend;
-
- return 0;
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct subsys_interface s3c2410_pm_interface = {
- .name = "s3c2410_pm",
- .subsys = &s3c2410_subsys,
- .add_dev = s3c2410_pm_add,
-};
-
-/* register ourselves */
-
-static int __init s3c2410_pm_drvinit(void)
-{
- return subsys_interface_register(&s3c2410_pm_interface);
-}
-
-arch_initcall(s3c2410_pm_drvinit);
-
-static struct subsys_interface s3c2410a_pm_interface = {
- .name = "s3c2410a_pm",
- .subsys = &s3c2410a_subsys,
- .add_dev = s3c2410_pm_add,
-};
-
-static int __init s3c2410a_pm_drvinit(void)
-{
- return subsys_interface_register(&s3c2410a_pm_interface);
-}
-
-arch_initcall(s3c2410a_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2440)
-static struct subsys_interface s3c2440_pm_interface = {
- .name = "s3c2440_pm",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2410_pm_add,
-};
-
-static int __init s3c2440_pm_drvinit(void)
-{
- return subsys_interface_register(&s3c2440_pm_interface);
-}
-
-arch_initcall(s3c2440_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-static struct subsys_interface s3c2442_pm_interface = {
- .name = "s3c2442_pm",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c2410_pm_add,
-};
-
-static int __init s3c2442_pm_drvinit(void)
-{
- return subsys_interface_register(&s3c2442_pm_interface);
-}
-
-arch_initcall(s3c2442_pm_drvinit);
-#endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// http://armlinux.simtec.co.uk/.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/wakeup-mask.h>
-
-#include "regs-dsc.h"
-#include "s3c2412-power.h"
-
-extern void s3c2412_sleep_enter(void);
-
-static int s3c2412_cpu_suspend(unsigned long arg)
-{
- unsigned long tmp;
-
- /* set our standby method to sleep */
-
- tmp = __raw_readl(S3C2412_PWRCFG);
- tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
- __raw_writel(tmp, S3C2412_PWRCFG);
-
- s3c2412_sleep_enter();
-
- pr_info("Failed to suspend the system\n");
- return 1; /* Aborting suspend */
-}
-
-/* mapping of interrupts to parts of the wakeup mask */
-static const struct samsung_wakeup_mask wake_irqs[] = {
- { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, },
-};
-
-static void s3c2412_pm_prepare(void)
-{
- samsung_sync_wakemask(S3C2412_PWRCFG,
- wake_irqs, ARRAY_SIZE(wake_irqs));
-}
-
-static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
-{
- pm_cpu_prep = s3c2412_pm_prepare;
- pm_cpu_sleep = s3c2412_cpu_suspend;
-
- return 0;
-}
-
-static struct sleep_save s3c2412_sleep[] = {
- SAVE_ITEM(S3C2412_DSC0),
- SAVE_ITEM(S3C2412_DSC1),
- SAVE_ITEM(S3C2413_GPJDAT),
- SAVE_ITEM(S3C2413_GPJCON),
- SAVE_ITEM(S3C2413_GPJUP),
-
- /* save the PWRCFG to get back to original sleep method */
-
- SAVE_ITEM(S3C2412_PWRCFG),
-
- /* save the sleep configuration anyway, just in case these
- * get damaged during wakeup */
-
- SAVE_ITEM(S3C2412_GPBSLPCON),
- SAVE_ITEM(S3C2412_GPCSLPCON),
- SAVE_ITEM(S3C2412_GPDSLPCON),
- SAVE_ITEM(S3C2412_GPFSLPCON),
- SAVE_ITEM(S3C2412_GPGSLPCON),
- SAVE_ITEM(S3C2412_GPHSLPCON),
- SAVE_ITEM(S3C2413_GPJSLPCON),
-};
-
-static struct subsys_interface s3c2412_pm_interface = {
- .name = "s3c2412_pm",
- .subsys = &s3c2412_subsys,
- .add_dev = s3c2412_pm_add,
-};
-
-static __init int s3c2412_pm_init(void)
-{
- return subsys_interface_register(&s3c2412_pm_interface);
-}
-
-arch_initcall(s3c2412_pm_init);
-
-static int s3c2412_pm_suspend(void)
-{
- s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
- return 0;
-}
-
-static void s3c2412_pm_resume(void)
-{
- unsigned long tmp;
-
- tmp = __raw_readl(S3C2412_PWRCFG);
- tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
- tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
- __raw_writel(tmp, S3C2412_PWRCFG);
-
- s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
-}
-
-struct syscore_ops s3c2412_pm_syscore_ops = {
- .suspend = s3c2412_pm_suspend,
- .resume = s3c2412_pm_resume,
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2010 Samsung Electronics Co., Ltd.
-// http://www.samsung.com
-//
-// S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support)
-
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include "s3c2412-power.h"
-
-#ifdef CONFIG_PM_SLEEP
-extern void s3c2412_sleep_enter(void);
-
-static int s3c2416_cpu_suspend(unsigned long arg)
-{
- /* enable wakeup sources regardless of battery state */
- __raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG);
-
- /* set the mode as sleep, 2BED represents "Go to BED" */
- __raw_writel(0x2BED, S3C2443_PWRMODE);
-
- s3c2412_sleep_enter();
-
- pr_info("Failed to suspend the system\n");
- return 1; /* Aborting suspend */
-}
-
-static void s3c2416_pm_prepare(void)
-{
- /*
- * write the magic value u-boot uses to check for resume into
- * the INFORM0 register, and ensure INFORM1 is set to the
- * correct address to resume from.
- */
- __raw_writel(0x2BED, S3C2412_INFORM0);
- __raw_writel(__pa_symbol(s3c_cpu_resume), S3C2412_INFORM1);
-}
-
-static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif)
-{
- pm_cpu_prep = s3c2416_pm_prepare;
- pm_cpu_sleep = s3c2416_cpu_suspend;
-
- return 0;
-}
-
-static struct subsys_interface s3c2416_pm_interface = {
- .name = "s3c2416_pm",
- .subsys = &s3c2416_subsys,
- .add_dev = s3c2416_pm_add,
-};
-
-static __init int s3c2416_pm_init(void)
-{
- return subsys_interface_register(&s3c2416_pm_interface);
-}
-
-arch_initcall(s3c2416_pm_init);
-#endif
-
-static void s3c2416_pm_resume(void)
-{
- /* unset the return-from-sleep amd inform flags */
- __raw_writel(0x0, S3C2443_PWRMODE);
- __raw_writel(0x0, S3C2412_INFORM0);
- __raw_writel(0x0, S3C2412_INFORM1);
-}
-
-struct syscore_ops s3c2416_pm_syscore_ops = {
- .resume = s3c2416_pm_resume,
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2004-2006 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// S3C24XX Power Manager (Suspend-To-RAM) support
-//
-// See Documentation/arm/samsung-s3c24xx/suspend.rst for more information
-//
-// Parts based on arch/arm/mach-pxa/pm.c
-//
-// Thanks to Dimitry Andric for debugging
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-irq.h>
-#include <mach/gpio-samsung.h>
-
-#include <asm/mach/time.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
-
-#include "regs-mem.h"
-
-#define PFX "s3c24xx-pm: "
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save core_save[] = {
- /* we restore the timings here, with the proviso that the board
- * brings the system up in an slower, or equal frequency setting
- * to the original system.
- *
- * if we cannot guarantee this, then things are going to go very
- * wrong here, as we modify the refresh and both pll settings.
- */
-
- SAVE_ITEM(S3C2410_BWSCON),
- SAVE_ITEM(S3C2410_BANKCON0),
- SAVE_ITEM(S3C2410_BANKCON1),
- SAVE_ITEM(S3C2410_BANKCON2),
- SAVE_ITEM(S3C2410_BANKCON3),
- SAVE_ITEM(S3C2410_BANKCON4),
- SAVE_ITEM(S3C2410_BANKCON5),
-};
-#endif
-
-/* s3c_pm_check_resume_pin
- *
- * check to see if the pin is configured correctly for sleep mode, and
- * make any necessary adjustments if it is not
-*/
-
-static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
-{
- unsigned long irqstate;
- unsigned long pinstate;
- int irq = gpio_to_irq(pin);
-
- if (irqoffs < 4)
- irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
- else
- irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
-
- pinstate = s3c_gpio_getcfg(pin);
-
- if (!irqstate) {
- if (pinstate == S3C2410_GPIO_IRQ)
- S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin);
- } else {
- if (pinstate == S3C2410_GPIO_IRQ) {
- S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
- s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
- }
- }
-}
-
-/* s3c_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
-
-void s3c_pm_configure_extint(void)
-{
- int pin;
-
- /* for each of the external interrupts (EINT0..EINT15) we
- * need to check whether it is an external interrupt source,
- * and then configure it as an input if it is not
- */
-
- for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
- s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
- }
-
- for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
- s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
- }
-}
-
-#ifdef CONFIG_PM_SLEEP
-void s3c_pm_restore_core(void)
-{
- s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-}
-
-void s3c_pm_save_core(void)
-{
- s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
-}
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * S3C2440/S3C2412 Signal Drive Strength Control
- */
-
-
-#ifndef __ASM_ARCH_REGS_DSC_H
-#define __ASM_ARCH_REGS_DSC_H __FILE__
-
-/* S3C2412 */
-#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc)
-#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0)
-
-/* S3C2440 */
-#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
-#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8)
-
-#endif /* __ASM_ARCH_REGS_DSC_H */
-
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * S3C2410 Memory Control register definitions
- */
-
-#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H
-#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__
-
-#include <plat/map-s3c.h>
-
-#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-
-#define S3C2410_BWSCON S3C2410_MEMREG(0x00)
-#define S3C2410_BANKCON0 S3C2410_MEMREG(0x04)
-#define S3C2410_BANKCON1 S3C2410_MEMREG(0x08)
-#define S3C2410_BANKCON2 S3C2410_MEMREG(0x0C)
-#define S3C2410_BANKCON3 S3C2410_MEMREG(0x10)
-#define S3C2410_BANKCON4 S3C2410_MEMREG(0x14)
-#define S3C2410_BANKCON5 S3C2410_MEMREG(0x18)
-#define S3C2410_BANKCON6 S3C2410_MEMREG(0x1C)
-#define S3C2410_BANKCON7 S3C2410_MEMREG(0x20)
-#define S3C2410_REFRESH S3C2410_MEMREG(0x24)
-#define S3C2410_BANKSIZE S3C2410_MEMREG(0x28)
-
-#define S3C2410_BWSCON_ST1 (1 << 7)
-#define S3C2410_BWSCON_ST2 (1 << 11)
-#define S3C2410_BWSCON_ST3 (1 << 15)
-#define S3C2410_BWSCON_ST4 (1 << 19)
-#define S3C2410_BWSCON_ST5 (1 << 23)
-
-#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
-
-#define S3C2410_BWSCON_WS (1 << 2)
-
-#define S3C2410_BANKCON_PMC16 (0x3)
-
-#define S3C2410_BANKCON_Tacp_SHIFT (2)
-#define S3C2410_BANKCON_Tcah_SHIFT (4)
-#define S3C2410_BANKCON_Tcoh_SHIFT (6)
-#define S3C2410_BANKCON_Tacc_SHIFT (8)
-#define S3C2410_BANKCON_Tcos_SHIFT (11)
-#define S3C2410_BANKCON_Tacs_SHIFT (13)
-
-#define S3C2410_BANKCON_SDRAM (0x3 << 15)
-
-#define S3C2410_REFRESH_SELF (1 << 22)
-
-#define S3C2410_BANKSIZE_MASK (0x7 << 0)
-
-#endif /* __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2005 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.simtec.co.uk/products/EB2410ITX/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/gpio-samsung.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-#include "common.h"
-
-/* Initial IO mappings */
-
-static struct map_desc s3c2410_iodesc[] __initdata = {
- IODESC_ENT(CLKPWR),
- IODESC_ENT(TIMER),
- IODESC_ENT(WATCHDOG),
-};
-
-/* our uart devices */
-
-/* uart registration process */
-
-void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c2410-uart", s3c2410_uart_resources, cfg, no);
-}
-
-/* s3c2410_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
-*/
-
-void __init s3c2410_map_io(void)
-{
- s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
- s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
-
- iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
-}
-
-struct bus_type s3c2410_subsys = {
- .name = "s3c2410-core",
- .dev_name = "s3c2410-core",
-};
-
-/* Note, we would have liked to name this s3c2410-core, but we cannot
- * register two subsystems with the same name.
- */
-struct bus_type s3c2410a_subsys = {
- .name = "s3c2410a-core",
- .dev_name = "s3c2410a-core",
-};
-
-static struct device s3c2410_dev = {
- .bus = &s3c2410_subsys,
-};
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2410 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2410_core_init(void)
-{
- return subsys_system_register(&s3c2410_subsys, NULL);
-}
-
-core_initcall(s3c2410_core_init);
-
-static int __init s3c2410a_core_init(void)
-{
- return subsys_system_register(&s3c2410a_subsys, NULL);
-}
-
-core_initcall(s3c2410a_core_init);
-
-int __init s3c2410_init(void)
-{
- printk("S3C2410: Initialising architecture\n");
-
-#ifdef CONFIG_PM_SLEEP
- register_syscore_ops(&s3c2410_pm_syscore_ops);
- register_syscore_ops(&s3c24xx_irq_syscore_ops);
-#endif
-
- return device_register(&s3c2410_dev);
-}
-
-int __init s3c2410a_init(void)
-{
- s3c2410_dev.bus = &s3c2410a_subsys;
- return s3c2410_init();
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- */
-
-#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H
-#define __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H __FILE__
-
-#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20)
-#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24)
-
-#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70)
-#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74)
-#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78)
-#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C)
-
-#define S3C2412_PWRCFG_BATF_IRQ (1 << 0)
-#define S3C2412_PWRCFG_BATF_IGNORE (2 << 0)
-#define S3C2412_PWRCFG_BATF_SLEEP (3 << 0)
-#define S3C2412_PWRCFG_BATF_MASK (3 << 0)
-
-#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0 << 6)
-#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1 << 6)
-#define S3C2412_PWRCFG_STANDBYWFI_STOP (2 << 6)
-#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3 << 6)
-#define S3C2412_PWRCFG_STANDBYWFI_MASK (3 << 6)
-
-#define S3C2412_PWRCFG_RTC_MASKIRQ (1 << 8)
-#define S3C2412_PWRCFG_NAND_NORST (1 << 9)
-
-#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// http://armlinux.simtec.co.uk/.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-
-#include "common.h"
-#include "nand-core.h"
-#include "regs-dsc.h"
-#include "s3c2412-power.h"
-
-#ifndef CONFIG_CPU_S3C2412_ONLY
-void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
-
-static inline void s3c2412_init_gpio2(void)
-{
- s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
-}
-#else
-#define s3c2412_init_gpio2() do { } while(0)
-#endif
-
-/* Initial IO mappings */
-
-static struct map_desc s3c2412_iodesc[] __initdata = {
- IODESC_ENT(CLKPWR),
- IODESC_ENT(TIMER),
- IODESC_ENT(WATCHDOG),
- {
- .virtual = (unsigned long)S3C2412_VA_SSMC,
- .pfn = __phys_to_pfn(S3C2412_PA_SSMC),
- .length = SZ_1M,
- .type = MT_DEVICE,
- },
- {
- .virtual = (unsigned long)S3C2412_VA_EBI,
- .pfn = __phys_to_pfn(S3C2412_PA_EBI),
- .length = SZ_1M,
- .type = MT_DEVICE,
- },
-};
-
-/* uart registration process */
-
-void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
-
- /* rename devices that are s3c2412/s3c2413 specific */
- s3c_device_sdi.name = "s3c2412-sdi";
- s3c_device_lcd.name = "s3c2412-lcd";
- s3c_nand_setname("s3c2412-nand");
-
- /* alter IRQ of SDI controller */
-
- s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI;
- s3c_device_sdi.resource[1].end = IRQ_S3C2412_SDI;
-
- /* spi channel related changes, s3c2412/13 specific */
- s3c_device_spi0.name = "s3c2412-spi";
- s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24;
- s3c_device_spi1.name = "s3c2412-spi";
- s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1;
- s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24;
-
-}
-
-/* s3c2412_idle
- *
- * use the standard idle call by ensuring the idle mode
- * in power config, then issuing the idle co-processor
- * instruction
-*/
-
-static void s3c2412_idle(void)
-{
- unsigned long tmp;
-
- /* ensure our idle mode is to go to idle */
-
- tmp = __raw_readl(S3C2412_PWRCFG);
- tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
- tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
- __raw_writel(tmp, S3C2412_PWRCFG);
-
- cpu_do_idle();
-}
-
-/* s3c2412_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
-*/
-
-void __init s3c2412_map_io(void)
-{
- /* move base of IO */
-
- s3c2412_init_gpio2();
-
- /* set our idle function */
-
- arm_pm_idle = s3c2412_idle;
-
- /* register our io-tables */
-
- iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
-}
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2412 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-struct bus_type s3c2412_subsys = {
- .name = "s3c2412-core",
- .dev_name = "s3c2412-core",
-};
-
-static int __init s3c2412_core_init(void)
-{
- return subsys_system_register(&s3c2412_subsys, NULL);
-}
-
-core_initcall(s3c2412_core_init);
-
-static struct device s3c2412_dev = {
- .bus = &s3c2412_subsys,
-};
-
-int __init s3c2412_init(void)
-{
- printk("S3C2412: Initialising architecture\n");
-
-#ifdef CONFIG_PM_SLEEP
- register_syscore_ops(&s3c2412_pm_syscore_ops);
- register_syscore_ops(&s3c24xx_irq_syscore_ops);
-#endif
-
- return device_register(&s3c2412_dev);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
-// as part of OpenInkpot project
-// Copyright (c) 2009 Promwad Innovation Company
-// Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
-//
-// Samsung S3C2416 Mobile CPU support
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/gpio-samsung.h>
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include <mach/regs-s3c2443-clock.h>
-#include <mach/rtc-core.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/sdhci.h>
-#include <plat/pm.h>
-
-#include <plat/iic-core.h>
-#include <plat/adc-core.h>
-
-#include "common.h"
-#include "fb-core.h"
-#include "nand-core.h"
-#include "spi-core.h"
-
-static struct map_desc s3c2416_iodesc[] __initdata = {
- IODESC_ENT(WATCHDOG),
- IODESC_ENT(CLKPWR),
- IODESC_ENT(TIMER),
-};
-
-struct bus_type s3c2416_subsys = {
- .name = "s3c2416-core",
- .dev_name = "s3c2416-core",
-};
-
-static struct device s3c2416_dev = {
- .bus = &s3c2416_subsys,
-};
-
-int __init s3c2416_init(void)
-{
- printk(KERN_INFO "S3C2416: Initializing architecture\n");
-
- /* change WDT IRQ number */
- s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
- s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
-
- /* the i2c devices are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
-
- s3c_fb_setname("s3c2443-fb");
-
- s3c_adc_setname("s3c2416-adc");
- s3c_rtc_setname("s3c2416-rtc");
-
-#ifdef CONFIG_PM_SLEEP
- register_syscore_ops(&s3c2416_pm_syscore_ops);
- register_syscore_ops(&s3c24xx_irq_syscore_ops);
- register_syscore_ops(&s3c2416_irq_syscore_ops);
-#endif
-
- return device_register(&s3c2416_dev);
-}
-
-void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-
- s3c_nand_setname("s3c2412-nand");
-}
-
-/* s3c2416_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
- */
-
-void __init s3c2416_map_io(void)
-{
- s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
- s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
-
- /* initialize device information early */
- s3c2416_default_sdhci0();
- s3c2416_default_sdhci1();
- s3c24xx_spi_setname("s3c2443-spi");
-
- iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
-}
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2416 based system)
- * as a driver which may support both 2443 and 2440 may try and use it.
-*/
-
-static int __init s3c2416_core_init(void)
-{
- return subsys_system_register(&s3c2416_subsys, NULL);
-}
-
-core_initcall(s3c2416_core_init);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2004-2006 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Samsung S3C2440 Mobile CPU support
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/gpio-samsung.h>
-#include <asm/irq.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-#include "common.h"
-
-static struct device s3c2440_dev = {
- .bus = &s3c2440_subsys,
-};
-
-int __init s3c2440_init(void)
-{
- printk("S3C2440: Initialising architecture\n");
-
- /* change irq for watchdog */
-
- s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
- s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT;
-
- /* register suspend/resume handlers */
-
-#ifdef CONFIG_PM_SLEEP
- register_syscore_ops(&s3c2410_pm_syscore_ops);
- register_syscore_ops(&s3c24xx_irq_syscore_ops);
- register_syscore_ops(&s3c244x_pm_syscore_ops);
-#endif
-
- /* register our system device for everything else */
-
- return device_register(&s3c2440_dev);
-}
-
-void __init s3c2440_map_io(void)
-{
- s3c244x_map_io();
-
- s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
- s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2004-2005 Simtec Electronics
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>
-//
-// S3C2442 core and lock support
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/gpio-samsung.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-#include "common.h"
-
-static struct device s3c2442_dev = {
- .bus = &s3c2442_subsys,
-};
-
-int __init s3c2442_init(void)
-{
- printk("S3C2442: Initialising architecture\n");
-
-#ifdef CONFIG_PM_SLEEP
- register_syscore_ops(&s3c2410_pm_syscore_ops);
- register_syscore_ops(&s3c24xx_irq_syscore_ops);
- register_syscore_ops(&s3c244x_pm_syscore_ops);
-#endif
-
- return device_register(&s3c2442_dev);
-}
-
-void __init s3c2442_map_io(void)
-{
- s3c244x_map_io();
-
- s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
- s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2007 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Samsung S3C2443 Mobile CPU support
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/gpio-samsung.h>
-#include <mach/irqs.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include <mach/regs-s3c2443-clock.h>
-#include <mach/rtc-core.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/adc-core.h>
-
-#include "common.h"
-#include "fb-core.h"
-#include "nand-core.h"
-#include "spi-core.h"
-
-static struct map_desc s3c2443_iodesc[] __initdata = {
- IODESC_ENT(WATCHDOG),
- IODESC_ENT(CLKPWR),
- IODESC_ENT(TIMER),
-};
-
-struct bus_type s3c2443_subsys = {
- .name = "s3c2443-core",
- .dev_name = "s3c2443-core",
-};
-
-static struct device s3c2443_dev = {
- .bus = &s3c2443_subsys,
-};
-
-int __init s3c2443_init(void)
-{
- printk("S3C2443: Initialising architecture\n");
-
- s3c_nand_setname("s3c2412-nand");
- s3c_fb_setname("s3c2443-fb");
-
- s3c_adc_setname("s3c2443-adc");
- s3c_rtc_setname("s3c2443-rtc");
-
- /* change WDT IRQ number */
- s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
- s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
-
- return device_register(&s3c2443_dev);
-}
-
-void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-}
-
-/* s3c2443_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
- */
-
-void __init s3c2443_map_io(void)
-{
- s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
- s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
-
- /* initialize device information early */
- s3c24xx_spi_setname("s3c2443-spi");
-
- iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
-}
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2443 based system)
- * as a driver which may support both 2443 and 2440 may try and use it.
-*/
-
-static int __init s3c2443_core_init(void)
-{
- return subsys_system_register(&s3c2443_subsys, NULL);
-}
-
-core_initcall(s3c2443_core_init);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2004-2006 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include "common.h"
-#include "nand-core.h"
-#include "regs-dsc.h"
-
-static struct map_desc s3c244x_iodesc[] __initdata = {
- IODESC_ENT(CLKPWR),
- IODESC_ENT(TIMER),
- IODESC_ENT(WATCHDOG),
-};
-
-/* uart initialisation */
-
-void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-}
-
-void __init s3c244x_map_io(void)
-{
- /* register our io-tables */
-
- iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
-
- /* rename any peripherals used differing from the s3c2410 */
-
- s3c_device_sdi.name = "s3c2440-sdi";
- s3c_device_i2c0.name = "s3c2440-i2c";
- s3c_nand_setname("s3c2440-nand");
- s3c_device_ts.name = "s3c2440-ts";
- s3c_device_usbgadget.name = "s3c2440-usbgadget";
- s3c2410_device_dclk.name = "s3c2440-dclk";
-}
-
-/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
-
-struct bus_type s3c2440_subsys = {
- .name = "s3c2440-core",
- .dev_name = "s3c2440-core",
-};
-
-struct bus_type s3c2442_subsys = {
- .name = "s3c2442-core",
- .dev_name = "s3c2442-core",
-};
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2440_core_init(void)
-{
- return subsys_system_register(&s3c2440_subsys, NULL);
-}
-
-core_initcall(s3c2440_core_init);
-
-static int __init s3c2442_core_init(void)
-{
- return subsys_system_register(&s3c2442_subsys, NULL);
-}
-
-core_initcall(s3c2442_core_init);
-
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save s3c244x_sleep[] = {
- SAVE_ITEM(S3C2440_DSC0),
- SAVE_ITEM(S3C2440_DSC1),
- SAVE_ITEM(S3C2440_GPJDAT),
- SAVE_ITEM(S3C2440_GPJCON),
- SAVE_ITEM(S3C2440_GPJUP)
-};
-
-static int s3c244x_suspend(void)
-{
- s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
- return 0;
-}
-
-static void s3c244x_resume(void)
-{
- s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-}
-
-struct syscore_ops s3c244x_pm_syscore_ops = {
- .suspend = s3c244x_suspend,
- .resume = s3c244x_resume,
-};
-#endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// S3C24XX Base setup for i2c device
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-struct platform_device;
-
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
- s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2010 Promwad Innovation Company
-// Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
-//
-// S3C2416 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
-//
-// Based on mach-s3c64xx/setup-sdhci-gpio.c
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-
-void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
- s3c_gpio_cfgrange_nopull(S3C2410_GPE(5), 2 + width, S3C_GPIO_SFN(2));
-}
-
-void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
- s3c_gpio_cfgrange_nopull(S3C2410_GPL(0), width, S3C_GPIO_SFN(2));
- s3c_gpio_cfgrange_nopull(S3C2410_GPL(8), 2, S3C_GPIO_SFN(2));
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// HS-SPI device setup for S3C2443/S3C2416
-//
-// Copyright (C) 2011 Samsung Electronics Ltd.
-// http://www.samsung.com/
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <plat/gpio-cfg.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-int s3c64xx_spi0_cfg_gpio(void)
-{
- /* enable hsspi bit in misccr */
- s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
-
- s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-
- return 0;
-}
-#endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2010 Samsung Electronics Co., Ltd.
-// http://www.samsung.com/
-//
-// Based on S3C24XX setup for i2c device
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
-
-/**
- * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
- * @dev: Device to configure GPIO for (ignored)
- *
- * Configure the GPIO for the S3C2410 system, where we have external FETs
- * connected to the device (later systems such as the S3C2440 integrate
- * these into the device).
- */
-void s3c24xx_ts_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgpin_range(S3C2410_GPG(12), 4, S3C_GPIO_SFN(3));
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009 Simtec Electronics
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Audio setup for various Simtec S3C24XX implementations
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
-
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include <plat/devs.h>
-
-#include "bast.h"
-#include "simtec.h"
-
-/* platform ops for audio */
-
-static void simtec_audio_startup_lrroute(void)
-{
- unsigned int tmp;
- unsigned long flags;
-
- local_irq_save(flags);
-
- tmp = __raw_readb(BAST_VA_CTRL1);
- tmp &= ~BAST_CPLD_CTRL1_LRMASK;
- tmp |= BAST_CPLD_CTRL1_LRCDAC;
- __raw_writeb(tmp, BAST_VA_CTRL1);
-
- local_irq_restore(flags);
-}
-
-static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata;
-static char our_name[32];
-
-static struct platform_device simtec_audio_dev = {
- .name = our_name,
- .id = -1,
- .dev = {
- .parent = &s3c_device_iis.dev,
- .platform_data = &simtec_audio_platdata,
- },
-};
-
-int __init simtec_audio_add(const char *name, bool has_lr_routing,
- struct s3c24xx_audio_simtec_pdata *spd)
-{
- if (!name)
- name = "tlv320aic23";
-
- snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name);
-
- /* copy platform data so the source can be __initdata */
- if (spd)
- simtec_audio_platdata = *spd;
-
- if (has_lr_routing)
- simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
-
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
- platform_device_register(&s3c_device_iis);
- platform_device_register(&simtec_audio_dev);
- return 0;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2008 Simtec Electronics
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Simtec NOR mapping
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-
-#include "bast.h"
-#include "simtec.h"
-
-static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
-{
- unsigned int val;
-
- val = __raw_readb(BAST_VA_CTRL3);
-
- printk(KERN_DEBUG "%s(%d)\n", __func__, vpp);
-
- if (vpp)
- val |= BAST_CPLD_CTRL3_ROMWEN;
- else
- val &= ~BAST_CPLD_CTRL3_ROMWEN;
-
- __raw_writeb(val, BAST_VA_CTRL3);
-}
-
-static struct physmap_flash_data simtec_nor_pdata = {
- .width = 2,
- .set_vpp = simtec_nor_vpp,
- .nr_parts = 0,
-};
-
-static struct resource simtec_nor_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2410_CS1 + 0x4000000, SZ_8M),
-};
-
-static struct platform_device simtec_device_nor = {
- .name = "physmap-flash",
- .id = -1,
- .num_resources = ARRAY_SIZE(simtec_nor_resource),
- .resource = simtec_nor_resource,
- .dev = {
- .platform_data = &simtec_nor_pdata,
- },
-};
-
-void __init nor_simtec_init(void)
-{
- int ret;
-
- ret = platform_device_register(&simtec_device_nor);
- if (ret < 0)
- printk(KERN_ERR "failed to register physmap-flash device\n");
- else
- simtec_nor_vpp(NULL, 1);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2004 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// http://armlinux.simtec.co.uk/
-//
-// Power Management helpers for Simtec S3C24XX implementations
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <asm/mach-types.h>
-
-#include <plat/pm.h>
-
-#include "regs-mem.h"
-
-#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
-
-/* pm_simtec_init
- *
- * enable the power management functions
-*/
-
-static __init int pm_simtec_init(void)
-{
- unsigned long gstatus4;
-
- /* check which machine we are running on */
-
- if (!machine_is_bast() && !machine_is_vr1000() &&
- !machine_is_anubis() && !machine_is_osiris() &&
- !machine_is_aml_m5900())
- return 0;
-
- printk(KERN_INFO "Simtec Board Power Management" COPYRIGHT "\n");
-
- gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
- gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
- gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
-
- __raw_writel(gstatus4, S3C2410_GSTATUS4);
-
- return s3c_pm_init();
-}
-
-arch_initcall(pm_simtec_init);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2004-2005 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.simtec.co.uk/products/EB2410ITX/
-//
-// Simtec BAST and Thorcom VR1000 USB port support functions
-
-#define DEBUG
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/gpio.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/gpio-samsung.h>
-#include <mach/irqs.h>
-#include <asm/irq.h>
-
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <plat/devs.h>
-
-#include "bast.h"
-#include "simtec.h"
-
-/* control power and monitor over-current events on various Simtec
- * designed boards.
-*/
-
-static unsigned int power_state[2];
-
-static void
-usb_simtec_powercontrol(int port, int to)
-{
- pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
-
- power_state[port] = to;
-
- if (power_state[0] && power_state[1])
- gpio_set_value(S3C2410_GPB(4), 0);
- else
- gpio_set_value(S3C2410_GPB(4), 1);
-}
-
-static irqreturn_t
-usb_simtec_ocirq(int irq, void *pw)
-{
- struct s3c2410_hcd_info *info = pw;
-
- if (gpio_get_value(S3C2410_GPG(10)) == 0) {
- pr_debug("usb_simtec: over-current irq (oc detected)\n");
- s3c2410_usb_report_oc(info, 3);
- } else {
- pr_debug("usb_simtec: over-current irq (oc cleared)\n");
- s3c2410_usb_report_oc(info, 0);
- }
-
- return IRQ_HANDLED;
-}
-
-static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
-{
- int ret;
-
- if (on) {
- ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "USB Over-current", info);
- if (ret != 0) {
- printk(KERN_ERR "failed to request usb oc irq\n");
- }
- } else {
- free_irq(BAST_IRQ_USBOC, info);
- }
-}
-
-static struct s3c2410_hcd_info usb_simtec_info __initdata = {
- .port[0] = {
- .flags = S3C_HCDFLG_USED
- },
- .port[1] = {
- .flags = S3C_HCDFLG_USED
- },
-
- .power_control = usb_simtec_powercontrol,
- .enable_oc = usb_simtec_enableoc,
-};
-
-
-int __init usb_simtec_init(void)
-{
- int ret;
-
- printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
-
- ret = gpio_request(S3C2410_GPB(4), "USB power control");
- if (ret < 0) {
- pr_err("%s: failed to get GPB4\n", __func__);
- return ret;
- }
-
- ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
- if (ret < 0) {
- pr_err("%s: failed to get GPG10\n", __func__);
- gpio_free(S3C2410_GPB(4));
- return ret;
- }
-
- /* turn power on */
- gpio_direction_output(S3C2410_GPB(4), 1);
- gpio_direction_input(S3C2410_GPG(10));
-
- s3c_ohci_set_platdata(&usb_simtec_info);
- return 0;
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec common functions
- */
-
-struct s3c24xx_audio_simtec_pdata;
-
-extern void nor_simtec_init(void);
-
-extern int usb_simtec_init(void);
-
-extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
- struct s3c24xx_audio_simtec_pdata *pdata);
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 Power Manager (Suspend-To-RAM) support
- *
- * Based on PXA/SA1100 sleep code by:
- * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- * Cliff Brake, (c) 2001
- */
-
-#include <linux/linkage.h>
-#include <linux/serial_s3c.h>
-#include <asm/assembler.h>
-#include <mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#include "regs-mem.h"
-
- /* s3c2410_cpu_suspend
- *
- * put the cpu into sleep mode
- */
-
-ENTRY(s3c2410_cpu_suspend)
- @@ prepare cpu to sleep
-
- ldr r4, =S3C2410_REFRESH
- ldr r5, =S3C24XX_MISCCR
- ldr r6, =S3C2410_CLKCON
- ldr r7, [r4] @ get REFRESH (and ensure in TLB)
- ldr r8, [r5] @ get MISCCR (and ensure in TLB)
- ldr r9, [r6] @ get CLKCON (and ensure in TLB)
-
- orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
- orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
- orr r9, r9, #S3C2410_CLKCON_POWER @ power down command
-
- teq pc, #0 @ first as a trial-run to load cache
- bl s3c2410_do_sleep
- teq r0, r0 @ now do it for real
- b s3c2410_do_sleep @
-
- @@ align next bit of code to cache line
- .align 5
-s3c2410_do_sleep:
- streq r7, [r4] @ SDRAM sleep command
- streq r8, [r5] @ SDRAM power-down config
- streq r9, [r6] @ CPU sleep
-1: beq 1b
- ret lr
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412 Power Manager low-level sleep support
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/map.h>
-
-#include <mach/regs-irq.h>
-
- .text
-
- .global s3c2412_sleep_enter
-
-s3c2412_sleep_enter:
- mov r0, #0 /* argument for coprocessors */
- ldr r1, =S3C2410_INTPND
- ldr r2, =S3C2410_SRCPND
- ldr r3, =S3C2410_EINTPEND
-
- teq r0, r0
- bl s3c2412_sleep_enter1
- teq pc, r0
- bl s3c2412_sleep_enter1
-
- .align 5
-
- /* this is called twice, first with the Z flag to ensure that the
- * instructions have been loaded into the cache, and the second
- * time to try and suspend the system.
- */
-s3c2412_sleep_enter1:
- mcr p15, 0, r0, c7, c10, 4
- mcrne p15, 0, r0, c7, c0, 4
-
- /* if we return from here, it is because an interrupt was
- * active when we tried to shutdown. Try and ack the IRQ and
- * retry, as simply returning causes the system to lock.
- */
-
- ldrne r9, [r1]
- strne r9, [r1]
- ldrne r9, [r2]
- strne r9, [r2]
- ldrne r9, [r3]
- strne r9, [r3]
- bne s3c2412_sleep_enter1
-
- ret lr
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 Power Manager (Suspend-To-RAM) support
- *
- * Based on PXA/SA1100 sleep code by:
- * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- * Cliff Brake, (c) 2001
- */
-
-#include <linux/linkage.h>
-#include <linux/serial_s3c.h>
-#include <asm/assembler.h>
-#include <mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-/*
- * S3C24XX_DEBUG_RESUME is dangerous if your bootloader does not
- * reset the UART configuration, only enable if you really need this!
- */
-//#define S3C24XX_DEBUG_RESUME
-
- .text
-
- /* sleep magic, to allow the bootloader to check for an valid
- * image to resume to. Must be the first word before the
- * s3c_cpu_resume entry.
- */
-
- .word 0x2bedf00d
-
- /* s3c_cpu_resume
- *
- * resume code entry for bootloader to call
- */
-
-ENTRY(s3c_cpu_resume)
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
- msr cpsr_c, r0
-
- @@ load UART to allow us to print the two characters for
- @@ resume debug
-
- mov r2, #S3C24XX_PA_UART & 0xff000000
- orr r2, r2, #S3C24XX_PA_UART & 0xff000
-
-#if 0
- /* SMDK2440 LED set */
- mov r14, #S3C24XX_PA_GPIO
- ldr r12, [ r14, #0x54 ]
- bic r12, r12, #3<<4
- orr r12, r12, #1<<7
- str r12, [ r14, #0x54 ]
-#endif
-
-#ifdef S3C24XX_DEBUG_RESUME
- mov r3, #'L'
- strb r3, [ r2, #S3C2410_UTXH ]
-1001:
- ldrb r14, [ r3, #S3C2410_UTRSTAT ]
- tst r14, #S3C2410_UTRSTAT_TXE
- beq 1001b
-#endif /* S3C24XX_DEBUG_RESUME */
-
- b cpu_resume
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
- */
-
-#ifndef __PLAT_S3C_SPI_CORE_H
-#define __PLAT_S3C_SPI_CORE_H
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c24xx_spi_setname(char *name)
-{
-#ifdef CONFIG_S3C64XX_DEV_SPI0
- s3c64xx_device_spi0.name = name;
-#endif
-#ifdef CONFIG_S3C64XX_DEV_SPI1
- s3c64xx_device_spi1.name = name;
-#endif
-#ifdef CONFIG_S3C64XX_DEV_SPI2
- s3c64xx_device_spi2.name = name;
-#endif
-}
-
-#endif /* __PLAT_S3C_SPI_CORE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * VR1000 - CPLD control constants
- * Machine VR1000 - IRQ Number definitions
- * Machine VR1000 - Memory map definitions
- */
-
-#ifndef __MACH_S3C24XX_VR1000_H
-#define __MACH_S3C24XX_VR1000_H __FILE__
-
-#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */
-
-/* irq numbers to onboard peripherals */
-
-#define VR1000_IRQ_USBOC IRQ_EINT19
-#define VR1000_IRQ_IDE0 IRQ_EINT16
-#define VR1000_IRQ_IDE1 IRQ_EINT17
-#define VR1000_IRQ_SERIAL IRQ_EINT12
-#define VR1000_IRQ_DM9000A IRQ_EINT10
-#define VR1000_IRQ_DM9000N IRQ_EINT9
-#define VR1000_IRQ_SMALERT IRQ_EINT8
-
-/* map */
-
-#define VR1000_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */
-#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
-
-#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */
-#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
-
-#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */
-#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
-
-#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */
-#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000)
-
-#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000)
-
-#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
-
-/*
- * 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000 8bit, slow
- * 0x04000000 to 0x08000000 16bit, slow
- * 0x08000000 to 0x0C000000 16bit, net
- * 0x0C000000 to 0x10000000 16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x02000000 to 0x02100000 1MB IDE primary channel
- * 0x02100000 to 0x02200000 1MB IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB IDE secondary channel
- * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
- * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers
- * 0x02600000 to 0x02700000 1MB
- *
- * the phyiscal layout of the zones are:
- * nGCS2 - 8bit, slow
- * nGCS3 - 16bit, slow
- * nGCS4 - 16bit, net
- * nGCS5 - 16bit, fast
- */
-
-#define VR1000_VA_MULTISPACE (0xE0000000)
-
-#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000)
-#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000)
-#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000)
-#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000)
-#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000)
-#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000)
-#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000)
-#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000)
-#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000)
-
-/* physical offset addresses for the peripherals */
-
-#define VR1000_PA_IDEPRI (0x02000000)
-#define VR1000_PA_IDEPRIAUX (0x02800000)
-#define VR1000_PA_IDESEC (0x03000000)
-#define VR1000_PA_IDESECAUX (0x03800000)
-#define VR1000_PA_DM9000 (0x05000000)
-
-#define VR1000_PA_SERIAL (0x11800000)
-#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000))
-
-/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
-#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000)
-
-/* some configurations for the peripherals */
-
-#define VR1000_DM9000_CS VR1000_VAM_CS4
-
-#endif /* __MACH_S3C24XX_VR1000_H */
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright 2008 Openmoko, Inc.
-# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
-
-menuconfig ARCH_S3C64XX
- bool "Samsung S3C64XX"
- depends on ARCH_MULTI_V6
- select ARM_AMBA
- select ARM_VIC
- select CLKSRC_SAMSUNG_PWM
- select COMMON_CLK_SAMSUNG
- select GPIO_SAMSUNG if ATAGS
- select GPIOLIB
- select HAVE_S3C2410_I2C if I2C
- select HAVE_TCM
- select PLAT_SAMSUNG
- select PM_GENERIC_DOMAINS if PM
- select S3C_DEV_NAND if ATAGS
- select S3C_GPIO_TRACK if ATAGS
- select S3C2410_WATCHDOG
- select SAMSUNG_ATAGS if ATAGS
- select SAMSUNG_WAKEMASK if PM
- select WATCHDOG
- help
- Samsung S3C64XX series based systems
-
-if ARCH_S3C64XX
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6400
- bool
- help
- Enable S3C6400 CPU support
-
-config CPU_S3C6410
- bool
- help
- Enable S3C6410 CPU support
-
-config S3C64XX_PL080
- def_bool DMADEVICES
- select AMBA_PL08X
-
-config S3C64XX_SETUP_SDHCI
- bool
- select S3C64XX_SETUP_SDHCI_GPIO
- help
- Internal configuration for default SDHCI setup for S3C6400 and
- S3C6410 SoCs.
-
-config S3C64XX_DEV_ONENAND1
- bool
- help
- Compile in platform device definition for OneNAND1 controller
-
-config SAMSUNG_DEV_BACKLIGHT
- bool
- depends on SAMSUNG_DEV_PWM
- help
- Compile in platform device definition LCD backlight with PWM Timer
-
-# platform specific device setup
-
-config S3C64XX_SETUP_I2C0
- bool
- default y
- help
- Common setup code for i2c bus 0.
-
- Note, currently since i2c0 is always compiled, this setup helper
- is always compiled with it.
-
-config S3C64XX_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
-config S3C64XX_SETUP_IDE
- bool
- help
- Common setup code for S3C64XX IDE.
-
-config S3C64XX_SETUP_FB_24BPP
- bool
- help
- Common setup code for S3C64XX with an 24bpp RGB display helper.
-
-config S3C64XX_SETUP_KEYPAD
- bool
- help
- Common setup code for S3C64XX KEYPAD GPIO configurations
-
-config S3C64XX_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for S3C64XX SDHCI GPIO configurations
-
-config S3C64XX_SETUP_SPI
- bool
- help
- Common setup code for SPI GPIO configurations
-
-config S3C64XX_SETUP_USB_PHY
- bool
- help
- Common setup code for USB PHY controller
-
-# S36400 Macchine support
-
-config MACH_SMDK6400
- bool "SMDK6400"
- depends on ATAGS
- select CPU_S3C6400
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_HSMMC1
- help
- Machine support for the Samsung SMDK6400
-
-# S3C6410 machine support
-
-config MACH_ANW6410
- bool "A&W6410"
- depends on ATAGS
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C_DEV_FB
- help
- Machine support for the A&W6410
-
-config MACH_MINI6410
- bool "MINI6410"
- depends on ATAGS
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_TS
- help
- Machine support for the FriendlyARM MINI6410
-
-config MACH_REAL6410
- bool "REAL6410"
- depends on ATAGS
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_TS
- help
- Machine support for the CoreWind REAL6410
-
-config MACH_SMDK6410
- bool "SMDK6410"
- depends on ATAGS
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_I2C1
- select S3C64XX_SETUP_IDE
- select S3C64XX_SETUP_KEYPAD
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_USB_PHY
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_IDE
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
- prompt "SMDK6410 MMC/SD slot setup"
- depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
- bool "Use channel 0 only"
- depends on MACH_SMDK6410
- help
- Select CON7 (channel 0) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
- bool "Use channel 1 only"
- depends on MACH_SMDK6410
- help
- Select CON6 (channel 1) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
- bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
- depends on MACH_SMDK6410
- depends on I2C=y
- select MFD_WM8350_I2C
- select REGULATOR
- select REGULATOR_WM8350
- help
- The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
- and audio daughtercard for the Samsung SMDK6410 reference
- platform. Enabling this option will build support for this
- module into the kernel. The presence of the module will be
- detected at runtime so the resulting kernel can be used
- with or without the 1190-EV1 fitted.
-
-config SMDK6410_WM1192_EV1
- bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
- depends on MACH_SMDK6410
- depends on I2C=y
- select MFD_WM831X
- select MFD_WM831X_I2C
- select REGULATOR
- select REGULATOR_WM831X
- help
- The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
- daughtercard for the Samsung SMDK6410 reference platform.
- Enabling this option will build support for this module into
- the kernel. The presence of the daughtercard will be
- detected at runtime so the resulting kernel can be used
- with or without the 1192-EV1 fitted.
-
-config MACH_NCP
- bool "NCP"
- depends on ATAGS
- select CPU_S3C6410
- select S3C64XX_SETUP_I2C1
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- help
- Machine support for the Samsung NCP
-
-config MACH_HMT
- bool "Airgoo HMT"
- depends on ATAGS
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C_DEV_FB
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_PWM
- help
- Machine support for the Airgoo HMT
-
-config MACH_SMARTQ
- bool
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_USB_PHY
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HWMON
- select S3C_DEV_RTC
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Shared machine support for SmartQ 5/7
-
-config MACH_SMARTQ5
- bool "SmartQ 5"
- depends on ATAGS
- select MACH_SMARTQ
- help
- Machine support for the SmartQ 5
-
-config MACH_SMARTQ7
- bool "SmartQ 7"
- depends on ATAGS
- select MACH_SMARTQ
- help
- Machine support for the SmartQ 7
-
-config MACH_WLF_CRAGG_6410
- bool "Wolfson Cragganmore 6410"
- depends on ATAGS
- depends on I2C=y
- select CPU_S3C6410
- select LEDS_GPIO_REGISTER
- select S3C64XX_DEV_SPI0
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_I2C1
- select S3C64XX_SETUP_IDE
- select S3C64XX_SETUP_KEYPAD
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_SPI
- select S3C64XX_SETUP_USB_PHY
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- help
- Machine support for the Wolfson Cragganmore S3C6410 variant.
-
-config MACH_S3C64XX_DT
- bool "Samsung S3C6400/S3C6410 machine using Device Tree"
- select CPU_S3C6400
- select CPU_S3C6410
- select PINCTRL
- select PINCTRL_S3C64XX
- help
- Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
- enabled.
- Select this if a fdt blob is available for your S3C64XX SoC based
- board.
- Note: This is under development and not all peripherals can be
- supported with this machine file.
-
-endif
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-
-# PM
-
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM_SLEEP) += sleep.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-
-ifdef CONFIG_SAMSUNG_ATAGS
-
-obj-$(CONFIG_PM_SLEEP) += irq-pm.o
-
-# Core
-
-obj-y += common.o
-obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
-obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
-
-# DMA support
-
-obj-$(CONFIG_S3C64XX_PL080) += pl080.o
-
-# Device support
-
-obj-y += dev-uart.o
-obj-y += dev-audio.o
-
-# Device setup
-
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi.o
-obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy.o
-
-obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
-obj-$(CONFIG_MACH_HMT) += mach-hmt.o
-obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
-obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
-obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
-obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
-endif
-
-obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Samsung CF-ATA Controller core functions
- */
-
-#ifndef __ASM_PLAT_ATA_CORE_H
-#define __ASM_PLAT_ATA_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
-*/
-
-/* re-define device name depending on support. */
-static inline void s3c_cfcon_setname(char *name)
-{
-#ifdef CONFIG_SAMSUNG_DEV_IDE
- s3c_device_cfcon.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_ATA_CORE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- */
-
-#ifndef __ASM_PLAT_BACKLIGHT_H
-#define __ASM_PLAT_BACKLIGHT_H __FILE__
-
-/* samsung_bl_gpio_info - GPIO info for PWM Backlight control
- * @no: GPIO number for PWM timer out
- * @func: Special function of GPIO line for PWM timer
- */
-struct samsung_bl_gpio_info {
- int no;
- int func;
-};
-
-extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
- struct platform_pwm_backlight_data *bl_data);
-
-#endif /* __ASM_PLAT_BACKLIGHT_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2011 Samsung Electronics Co., Ltd.
-// http://www.samsung.com
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// Common Codes for S3C64XX machines
-
-/*
- * NOTE: Code in this file is not used when booting with Device Tree support.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/io.h>
-#include <linux/clk/samsung.h>
-#include <linux/dma-mapping.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/irqchip/arm-vic.h>
-#include <clocksource/samsung_pwm.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pwm-core.h>
-#include <plat/regs-irqtype.h>
-
-#include "common.h"
-#include "irq-uart.h"
-
-/* External clock frequency */
-static unsigned long xtal_f __ro_after_init = 12000000;
-static unsigned long xusbxti_f __ro_after_init = 48000000;
-
-void __init s3c64xx_set_xtal_freq(unsigned long freq)
-{
- xtal_f = freq;
-}
-
-void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
-{
- xusbxti_f = freq;
-}
-
-/* uart registration process */
-
-static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
-}
-
-/* table of supported CPUs */
-
-static const char name_s3c6400[] = "S3C6400";
-static const char name_s3c6410[] = "S3C6410";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = S3C6400_CPU_ID,
- .idmask = S3C64XX_CPU_MASK,
- .map_io = s3c6400_map_io,
- .init_uarts = s3c64xx_init_uarts,
- .init = s3c6400_init,
- .name = name_s3c6400,
- }, {
- .idcode = S3C6410_CPU_ID,
- .idmask = S3C64XX_CPU_MASK,
- .map_io = s3c6410_map_io,
- .init_uarts = s3c64xx_init_uarts,
- .init = s3c6410_init,
- .name = name_s3c6410,
- },
-};
-
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xfffff)
-
-static struct map_desc s3c_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_MEM,
- .pfn = __phys_to_pfn(S3C64XX_PA_SROM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS),
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S3C64XX_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S3C64XX_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(S3C_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C64XX_VA_GPIO,
- .pfn = __phys_to_pfn(S3C64XX_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C64XX_VA_MODEM,
- .pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_USB_HSPHY,
- .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
- .length = SZ_1K,
- .type = MT_DEVICE,
- },
-};
-
-static struct bus_type s3c64xx_subsys = {
- .name = "s3c64xx-core",
- .dev_name = "s3c64xx-core",
-};
-
-static struct device s3c64xx_dev = {
- .bus = &s3c64xx_subsys,
-};
-
-static struct samsung_pwm_variant s3c64xx_pwm_variant = {
- .bits = 32,
- .div_base = 0,
- .has_tint_cstat = true,
- .tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
-};
-
-void __init samsung_set_timer_source(unsigned int event, unsigned int source)
-{
- s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
- s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
-}
-
-void __init samsung_timer_init(void)
-{
- unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
- IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
- IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
- };
-
- samsung_pwm_clocksource_init(S3C_VA_TIMER,
- timer_irqs, &s3c64xx_pwm_variant);
-}
-
-/* read cpu identification code */
-
-void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
-{
- /* initialise the io descriptors we need for initialisation */
- iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
- iotable_init(mach_desc, size);
-
- /* detect cpu id */
- s3c64xx_init_cpu();
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-
- samsung_pwm_set_platdata(&s3c64xx_pwm_variant);
-}
-
-static __init int s3c64xx_dev_init(void)
-{
- /* Not applicable when using DT. */
- if (of_have_populated_dt() || !soc_is_s3c64xx())
- return 0;
-
- subsys_system_register(&s3c64xx_subsys, NULL);
- return device_register(&s3c64xx_dev);
-}
-core_initcall(s3c64xx_dev_init);
-
-/*
- * setup the sources the vic should advertise resume
- * for, even though it is not doing the wake
- * (set_irq_wake needs to be valid)
- */
-#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
-#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
- 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
- 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
- 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
- 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
-
-void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
-{
- s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
-
- printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
- /* initialise the pair of VICs */
- vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
- vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
-}
-
-#define eint_offset(irq) ((irq) - IRQ_EINT(0))
-#define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq)))
-
-static inline void s3c_irq_eint_mask(struct irq_data *data)
-{
- u32 mask;
-
- mask = __raw_readl(S3C64XX_EINT0MASK);
- mask |= (u32)data->chip_data;
- __raw_writel(mask, S3C64XX_EINT0MASK);
-}
-
-static void s3c_irq_eint_unmask(struct irq_data *data)
-{
- u32 mask;
-
- mask = __raw_readl(S3C64XX_EINT0MASK);
- mask &= ~((u32)data->chip_data);
- __raw_writel(mask, S3C64XX_EINT0MASK);
-}
-
-static inline void s3c_irq_eint_ack(struct irq_data *data)
-{
- __raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
-}
-
-static void s3c_irq_eint_maskack(struct irq_data *data)
-{
- /* compiler should in-line these */
- s3c_irq_eint_mask(data);
- s3c_irq_eint_ack(data);
-}
-
-static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = eint_offset(data->irq);
- int pin, pin_val;
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
- void __iomem *reg;
-
- if (offs > 27)
- return -EINVAL;
-
- if (offs <= 15)
- reg = S3C64XX_EINT0CON0;
- else
- reg = S3C64XX_EINT0CON1;
-
- switch (type) {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
-
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S3C2410_EXTINT_RISEEDGE;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S3C2410_EXTINT_FALLEDGE;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S3C2410_EXTINT_BOTHEDGE;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S3C2410_EXTINT_LOWLEV;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S3C2410_EXTINT_HILEV;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -1;
- }
-
- if (offs <= 15)
- shift = (offs / 2) * 4;
- else
- shift = ((offs - 16) / 2) * 4;
- mask = 0x7 << shift;
-
- ctrl = __raw_readl(reg);
- ctrl &= ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, reg);
-
- /* set the GPIO pin appropriately */
-
- if (offs < 16) {
- pin = S3C64XX_GPN(offs);
- pin_val = S3C_GPIO_SFN(2);
- } else if (offs < 23) {
- pin = S3C64XX_GPL(offs + 8 - 16);
- pin_val = S3C_GPIO_SFN(3);
- } else {
- pin = S3C64XX_GPM(offs - 23);
- pin_val = S3C_GPIO_SFN(3);
- }
-
- s3c_gpio_cfgpin(pin, pin_val);
-
- return 0;
-}
-
-static struct irq_chip s3c_irq_eint = {
- .name = "s3c-eint",
- .irq_mask = s3c_irq_eint_mask,
- .irq_unmask = s3c_irq_eint_unmask,
- .irq_mask_ack = s3c_irq_eint_maskack,
- .irq_ack = s3c_irq_eint_ack,
- .irq_set_type = s3c_irq_eint_set_type,
- .irq_set_wake = s3c_irqext_wake,
-};
-
-/* s3c_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
- * the specific handlers s3c_irq_demux_eintX_Y.
- */
-static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
-{
- u32 status = __raw_readl(S3C64XX_EINT0PEND);
- u32 mask = __raw_readl(S3C64XX_EINT0MASK);
- unsigned int irq;
-
- status &= ~mask;
- status >>= start;
- status &= (1 << (end - start + 1)) - 1;
-
- for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
- if (status & 1)
- generic_handle_irq(irq);
-
- status >>= 1;
- }
-}
-
-static void s3c_irq_demux_eint0_3(struct irq_desc *desc)
-{
- s3c_irq_demux_eint(0, 3);
-}
-
-static void s3c_irq_demux_eint4_11(struct irq_desc *desc)
-{
- s3c_irq_demux_eint(4, 11);
-}
-
-static void s3c_irq_demux_eint12_19(struct irq_desc *desc)
-{
- s3c_irq_demux_eint(12, 19);
-}
-
-static void s3c_irq_demux_eint20_27(struct irq_desc *desc)
-{
- s3c_irq_demux_eint(20, 27);
-}
-
-static int __init s3c64xx_init_irq_eint(void)
-{
- int irq;
-
- /* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
- if (of_have_populated_dt() || !soc_is_s3c64xx())
- return -ENODEV;
-
- for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
- irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
- irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
- irq_clear_status_flags(irq, IRQ_NOREQUEST);
- }
-
- irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
- irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
- irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
- irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
-
- return 0;
-}
-arch_initcall(s3c64xx_init_irq_eint);
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Common Header for S3C64XX machines
- */
-
-#ifndef __ARCH_ARM_MACH_S3C64XX_COMMON_H
-#define __ARCH_ARM_MACH_S3C64XX_COMMON_H
-
-#include <linux/reboot.h>
-
-void s3c64xx_init_irq(u32 vic0, u32 vic1);
-void s3c64xx_init_io(struct map_desc *mach_desc, int size);
-
-struct device_node;
-void s3c64xx_set_xtal_freq(unsigned long freq);
-void s3c64xx_set_xusbxti_freq(unsigned long freq);
-
-#ifdef CONFIG_CPU_S3C6400
-
-extern int s3c6400_init(void);
-extern void s3c6400_init_irq(void);
-extern void s3c6400_map_io(void);
-
-#else
-#define s3c6400_map_io NULL
-#define s3c6400_init NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C6410
-
-extern int s3c6410_init(void);
-extern void s3c6410_init_irq(void);
-extern void s3c6410_map_io(void);
-
-#else
-#define s3c6410_map_io NULL
-#define s3c6410_init NULL
-#endif
-
-#ifdef CONFIG_S3C64XX_PL080
-extern struct pl08x_platform_data s3c64xx_dma0_plat_data;
-extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
-#endif
-
-/* Samsung HR-Timer Clock mode */
-enum samsung_timer_mode {
- SAMSUNG_PWM0,
- SAMSUNG_PWM1,
- SAMSUNG_PWM2,
- SAMSUNG_PWM3,
- SAMSUNG_PWM4,
-};
-
-extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
- enum samsung_timer_mode source);
-extern void __init samsung_timer_init(void);
-
-#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2011 Wolfson Microelectronics, plc
-// Copyright (c) 2011 Samsung Electronics Co., Ltd.
-// http://www.samsung.com
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/cpuidle.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/time.h>
-
-#include <asm/cpuidle.h>
-
-#include <plat/cpu.h>
-#include <mach/map.h>
-
-#include "regs-sys.h"
-#include "regs-syscon-power.h"
-
-static int s3c64xx_enter_idle(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- unsigned long tmp;
-
- /* Setup PWRCFG to enter idle mode */
- tmp = __raw_readl(S3C64XX_PWR_CFG);
- tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
- tmp |= S3C64XX_PWRCFG_CFG_WFI_IDLE;
- __raw_writel(tmp, S3C64XX_PWR_CFG);
-
- cpu_do_idle();
-
- return index;
-}
-
-static struct cpuidle_driver s3c64xx_cpuidle_driver = {
- .name = "s3c64xx_cpuidle",
- .owner = THIS_MODULE,
- .states = {
- {
- .enter = s3c64xx_enter_idle,
- .exit_latency = 1,
- .target_residency = 1,
- .name = "IDLE",
- .desc = "System active, ARM gated",
- },
- },
- .state_count = 1,
-};
-
-static int __init s3c64xx_init_cpuidle(void)
-{
- if (soc_is_s3c64xx())
- return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
- return 0;
-}
-device_initcall(s3c64xx_init_cpuidle);
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Cragganmore 6410 shared definitions
- *
- * Copyright 2011 Wolfson Microelectronics plc
- * Mark Brown <broonie@opensource.wolfsonmicro.com>
- */
-
-#ifndef MACH_CRAG6410_H
-#define MACH_CRAG6410_H
-
-#include <mach/gpio-samsung.h>
-
-#define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START
-#define BANFF_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
-
-#define PCA935X_GPIO_BASE GPIO_BOARD_START
-#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 32)
-#define BANFF_PMIC_GPIO_BASE (GPIO_BOARD_START + 64)
-#define MMGPIO_GPIO_BASE (GPIO_BOARD_START + 96)
-
-#endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2009 Wolfson Microelectronics
-// Mark Brown <broonie@opensource.wolfsonmicro.com>
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/export.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-#include <linux/platform_data/asoc-s3c.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
-
-static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
-{
- unsigned int base;
-
- switch (pdev->id) {
- case 0:
- base = S3C64XX_GPD(0);
- break;
- case 1:
- base = S3C64XX_GPE(0);
- break;
- case 2:
- s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
- return 0;
- default:
- printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
- pdev->id);
- return -EINVAL;
- }
-
- s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
-
- return 0;
-}
-
-static struct resource s3c64xx_iis0_resource[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_IIS0, SZ_256),
-};
-
-static struct s3c_audio_pdata i2s0_pdata = {
- .cfg_gpio = s3c64xx_i2s_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_iis0 = {
- .name = "samsung-i2s",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c64xx_iis0_resource),
- .resource = s3c64xx_iis0_resource,
- .dev = {
- .platform_data = &i2s0_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_iis0);
-
-static struct resource s3c64xx_iis1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_IIS1, SZ_256),
-};
-
-static struct s3c_audio_pdata i2s1_pdata = {
- .cfg_gpio = s3c64xx_i2s_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_iis1 = {
- .name = "samsung-i2s",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_iis1_resource),
- .resource = s3c64xx_iis1_resource,
- .dev = {
- .platform_data = &i2s1_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_iis1);
-
-static struct resource s3c64xx_iisv4_resource[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_IISV4, SZ_256),
-};
-
-static struct s3c_audio_pdata i2sv4_pdata = {
- .cfg_gpio = s3c64xx_i2s_cfg_gpio,
- .type = {
- .quirks = QUIRK_PRI_6CHAN,
- },
-};
-
-struct platform_device s3c64xx_device_iisv4 = {
- .name = "samsung-i2s",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource),
- .resource = s3c64xx_iisv4_resource,
- .dev = {
- .platform_data = &i2sv4_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_iisv4);
-
-
-/* PCM Controller platform_devices */
-
-static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
-{
- unsigned int base;
-
- switch (pdev->id) {
- case 0:
- base = S3C64XX_GPD(0);
- break;
- case 1:
- base = S3C64XX_GPE(0);
- break;
- default:
- printk(KERN_DEBUG "Invalid PCM Controller number: %d\n",
- pdev->id);
- return -EINVAL;
- }
-
- s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
- return 0;
-}
-
-static struct resource s3c64xx_pcm0_resource[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_PCM0, SZ_256),
-};
-
-static struct s3c_audio_pdata s3c_pcm0_pdata = {
- .cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm0 = {
- .name = "samsung-pcm",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c64xx_pcm0_resource),
- .resource = s3c64xx_pcm0_resource,
- .dev = {
- .platform_data = &s3c_pcm0_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm0);
-
-static struct resource s3c64xx_pcm1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_PCM1, SZ_256),
-};
-
-static struct s3c_audio_pdata s3c_pcm1_pdata = {
- .cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm1 = {
- .name = "samsung-pcm",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_pcm1_resource),
- .resource = s3c64xx_pcm1_resource,
- .dev = {
- .platform_data = &s3c_pcm1_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm1);
-
-/* AC97 Controller platform devices */
-
-static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
-{
- return s3c_gpio_cfgpin_range(S3C64XX_GPD(0), 5, S3C_GPIO_SFN(4));
-}
-
-static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
-{
- return s3c_gpio_cfgpin_range(S3C64XX_GPE(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource s3c64xx_ac97_resource[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_AC97, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_AC97),
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
-};
-
-static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c64xx_device_ac97 = {
- .name = "samsung-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c64xx_ac97_resource),
- .resource = s3c64xx_ac97_resource,
- .dev = {
- .platform_data = &s3c_ac97_pdata,
- .dma_mask = &s3c64xx_ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_ac97);
-
-void __init s3c64xx_ac97_setup_gpio(int num)
-{
- if (num == S3C64XX_AC97_GPD)
- s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
- else
- s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2011 Samsung Electronics Co., Ltd.
-// http://www.samsung.com
-//
-// Common infrastructure for PWM Backlight for Samsung boards
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/pwm_backlight.h>
-
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-
-#include "backlight.h"
-
-struct samsung_bl_drvdata {
- struct platform_pwm_backlight_data plat_data;
- struct samsung_bl_gpio_info *gpio_info;
-};
-
-static int samsung_bl_init(struct device *dev)
-{
- int ret = 0;
- struct platform_pwm_backlight_data *pdata = dev->platform_data;
- struct samsung_bl_drvdata *drvdata = container_of(pdata,
- struct samsung_bl_drvdata, plat_data);
- struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
-
- ret = gpio_request(bl_gpio_info->no, "Backlight");
- if (ret) {
- printk(KERN_ERR "failed to request GPIO for LCD Backlight\n");
- return ret;
- }
-
- /* Configure GPIO pin with specific GPIO function for PWM timer */
- s3c_gpio_cfgpin(bl_gpio_info->no, bl_gpio_info->func);
-
- return 0;
-}
-
-static void samsung_bl_exit(struct device *dev)
-{
- struct platform_pwm_backlight_data *pdata = dev->platform_data;
- struct samsung_bl_drvdata *drvdata = container_of(pdata,
- struct samsung_bl_drvdata, plat_data);
- struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
-
- s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT);
- gpio_free(bl_gpio_info->no);
-}
-
-/* Initialize few important fields of platform_pwm_backlight_data
- * structure with default values. These fields can be overridden by
- * board-specific values sent from machine file.
- * For ease of operation, these fields are initialized with values
- * used by most samsung boards.
- * Users has the option of sending info about other parameters
- * for their specific boards
- */
-
-static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
- .plat_data = {
- .max_brightness = 255,
- .dft_brightness = 255,
- .init = samsung_bl_init,
- .exit = samsung_bl_exit,
- },
-};
-
-static struct platform_device samsung_dfl_bl_device __initdata = {
- .name = "pwm-backlight",
-};
-
-/* samsung_bl_set - Set board specific data (if any) provided by user for
- * PWM Backlight control and register specific PWM and backlight device.
- * @gpio_info: structure containing GPIO info for PWM timer
- * @bl_data: structure containing Backlight control data
- */
-void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
- struct platform_pwm_backlight_data *bl_data)
-{
- int ret = 0;
- struct platform_device *samsung_bl_device;
- struct samsung_bl_drvdata *samsung_bl_drvdata;
- struct platform_pwm_backlight_data *samsung_bl_data;
-
- samsung_bl_device = kmemdup(&samsung_dfl_bl_device,
- sizeof(struct platform_device), GFP_KERNEL);
- if (!samsung_bl_device)
- return;
-
- samsung_bl_drvdata = kmemdup(&samsung_dfl_bl_data,
- sizeof(samsung_dfl_bl_data), GFP_KERNEL);
- if (!samsung_bl_drvdata)
- goto err_data;
-
- samsung_bl_device->dev.platform_data = &samsung_bl_drvdata->plat_data;
- samsung_bl_drvdata->gpio_info = gpio_info;
- samsung_bl_data = &samsung_bl_drvdata->plat_data;
-
- /* Copy board specific data provided by user */
- samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
-
- if (bl_data->max_brightness)
- samsung_bl_data->max_brightness = bl_data->max_brightness;
- if (bl_data->dft_brightness)
- samsung_bl_data->dft_brightness = bl_data->dft_brightness;
- if (bl_data->lth_brightness)
- samsung_bl_data->lth_brightness = bl_data->lth_brightness;
- if (bl_data->init)
- samsung_bl_data->init = bl_data->init;
- if (bl_data->notify)
- samsung_bl_data->notify = bl_data->notify;
- if (bl_data->notify_after)
- samsung_bl_data->notify_after = bl_data->notify_after;
- if (bl_data->exit)
- samsung_bl_data->exit = bl_data->exit;
- if (bl_data->check_fb)
- samsung_bl_data->check_fb = bl_data->check_fb;
-
- /* Register the Backlight dev */
- ret = platform_device_register(samsung_bl_device);
- if (ret) {
- printk(KERN_ERR "failed to register backlight device: %d\n", ret);
- goto err_plat_reg2;
- }
-
- return;
-
-err_plat_reg2:
- kfree(samsung_bl_data);
-err_data:
- kfree(samsung_bl_device);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// Base S3C64XX UART resource and device definitions
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <plat/devs.h>
-
-/* Serial port registrations */
-
-/* 64xx uarts are closer together */
-
-static struct resource s3c64xx_uart0_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_UART0, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_UART0),
-};
-
-static struct resource s3c64xx_uart1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_UART1, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_UART1),
-};
-
-static struct resource s3c6xx_uart2_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_UART2, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_UART2),
-};
-
-static struct resource s3c64xx_uart3_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_UART3, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_UART3),
-};
-
-
-struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
- [0] = {
- .resources = s3c64xx_uart0_resource,
- .nr_resources = ARRAY_SIZE(s3c64xx_uart0_resource),
- },
- [1] = {
- .resources = s3c64xx_uart1_resource,
- .nr_resources = ARRAY_SIZE(s3c64xx_uart1_resource),
- },
- [2] = {
- .resources = s3c6xx_uart2_resource,
- .nr_resources = ARRAY_SIZE(s3c6xx_uart2_resource),
- },
- [3] = {
- .resources = s3c64xx_uart3_resource,
- .nr_resources = ARRAY_SIZE(s3c64xx_uart3_resource),
- },
-};
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#define S3C64XX_DMA_CHAN(name) ((unsigned long)(name))
-
-/* DMA0/SDMA0 */
-#define DMACH_UART0 "uart0_tx"
-#define DMACH_UART0_SRC2 "uart0_rx"
-#define DMACH_UART1 "uart1_tx"
-#define DMACH_UART1_SRC2 "uart1_rx"
-#define DMACH_UART2 "uart2_tx"
-#define DMACH_UART2_SRC2 "uart2_rx"
-#define DMACH_UART3 "uart3_tx"
-#define DMACH_UART3_SRC2 "uart3_rx"
-#define DMACH_PCM0_TX "pcm0_tx"
-#define DMACH_PCM0_RX "pcm0_rx"
-#define DMACH_I2S0_OUT "i2s0_tx"
-#define DMACH_I2S0_IN "i2s0_rx"
-#define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx")
-#define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx")
-#define DMACH_HSI_I2SV40_TX "i2s2_tx"
-#define DMACH_HSI_I2SV40_RX "i2s2_rx"
-
-/* DMA1/SDMA1 */
-#define DMACH_PCM1_TX "pcm1_tx"
-#define DMACH_PCM1_RX "pcm1_rx"
-#define DMACH_I2S1_OUT "i2s1_tx"
-#define DMACH_I2S1_IN "i2s1_rx"
-#define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx")
-#define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx")
-#define DMACH_AC97_PCMOUT "ac97_out"
-#define DMACH_AC97_PCMIN "ac97_in"
-#define DMACH_AC97_MICIN "ac97_mic"
-#define DMACH_PWM "pwm"
-#define DMACH_IRDA "irda"
-#define DMACH_EXTERNAL "external"
-#define DMACH_SECURITY_RX "sec_rx"
-#define DMACH_SECURITY_TX "sec_tx"
-
-enum dma_ch {
- DMACH_MAX = 32
-};
-
-#include <linux/amba/pl08x.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - GPIO lib support
- */
-
-#ifndef GPIO_SAMSUNG_S3C64XX_H
-#define GPIO_SAMSUNG_S3C64XX_H
-
-#ifdef CONFIG_GPIO_SAMSUNG
-
-/* GPIO bank sizes */
-#define S3C64XX_GPIO_A_NR (8)
-#define S3C64XX_GPIO_B_NR (7)
-#define S3C64XX_GPIO_C_NR (8)
-#define S3C64XX_GPIO_D_NR (5)
-#define S3C64XX_GPIO_E_NR (5)
-#define S3C64XX_GPIO_F_NR (16)
-#define S3C64XX_GPIO_G_NR (7)
-#define S3C64XX_GPIO_H_NR (10)
-#define S3C64XX_GPIO_I_NR (16)
-#define S3C64XX_GPIO_J_NR (12)
-#define S3C64XX_GPIO_K_NR (16)
-#define S3C64XX_GPIO_L_NR (15)
-#define S3C64XX_GPIO_M_NR (6)
-#define S3C64XX_GPIO_N_NR (16)
-#define S3C64XX_GPIO_O_NR (16)
-#define S3C64XX_GPIO_P_NR (15)
-#define S3C64XX_GPIO_Q_NR (9)
-
-/* GPIO bank numbes */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S3C64XX_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s3c_gpio_number {
- S3C64XX_GPIO_A_START = 0,
- S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
- S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
- S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
- S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
- S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
- S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
- S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
- S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
- S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
- S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
- S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
- S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
- S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
- S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
- S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
- S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
-};
-
-/* S3C64XX GPIO number definitions. */
-
-#define S3C64XX_GPA(_nr) (S3C64XX_GPIO_A_START + (_nr))
-#define S3C64XX_GPB(_nr) (S3C64XX_GPIO_B_START + (_nr))
-#define S3C64XX_GPC(_nr) (S3C64XX_GPIO_C_START + (_nr))
-#define S3C64XX_GPD(_nr) (S3C64XX_GPIO_D_START + (_nr))
-#define S3C64XX_GPE(_nr) (S3C64XX_GPIO_E_START + (_nr))
-#define S3C64XX_GPF(_nr) (S3C64XX_GPIO_F_START + (_nr))
-#define S3C64XX_GPG(_nr) (S3C64XX_GPIO_G_START + (_nr))
-#define S3C64XX_GPH(_nr) (S3C64XX_GPIO_H_START + (_nr))
-#define S3C64XX_GPI(_nr) (S3C64XX_GPIO_I_START + (_nr))
-#define S3C64XX_GPJ(_nr) (S3C64XX_GPIO_J_START + (_nr))
-#define S3C64XX_GPK(_nr) (S3C64XX_GPIO_K_START + (_nr))
-#define S3C64XX_GPL(_nr) (S3C64XX_GPIO_L_START + (_nr))
-#define S3C64XX_GPM(_nr) (S3C64XX_GPIO_M_START + (_nr))
-#define S3C64XX_GPN(_nr) (S3C64XX_GPIO_N_START + (_nr))
-#define S3C64XX_GPO(_nr) (S3C64XX_GPIO_O_START + (_nr))
-#define S3C64XX_GPP(_nr) (S3C64XX_GPIO_P_START + (_nr))
-#define S3C64XX_GPQ(_nr) (S3C64XX_GPIO_Q_START + (_nr))
-
-/* the end of the S3C64XX specific gpios */
-#define S3C64XX_GPIO_END (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
-#define S3C_GPIO_END S3C64XX_GPIO_END
-
-/* define the number of gpios we need to the one after the GPQ() range */
-#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
-
-#endif /* GPIO_SAMSUNG */
-#endif /* GPIO_SAMSUNG_S3C64XX_H */
-
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - IRQ support
- */
-
-#ifndef __ASM_MACH_S3C64XX_IRQS_H
-#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S3C_IRQ_OFFSET (32)
-
-#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
-
-#define IRQ_VIC0_BASE S3C_IRQ(0)
-#define IRQ_VIC1_BASE S3C_IRQ(32)
-
-/* VIC based IRQs */
-
-#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x))
-#define S3C64XX_IRQ_VIC1(x) (IRQ_VIC1_BASE + (x))
-
-/* VIC0 */
-
-#define IRQ_EINT0_3 S3C64XX_IRQ_VIC0(0)
-#define IRQ_EINT4_11 S3C64XX_IRQ_VIC0(1)
-#define IRQ_RTC_TIC S3C64XX_IRQ_VIC0(2)
-#define IRQ_CAMIF_C S3C64XX_IRQ_VIC0(3)
-#define IRQ_CAMIF_P S3C64XX_IRQ_VIC0(4)
-#define IRQ_CAMIF_MC S3C64XX_IRQ_VIC0(5)
-#define IRQ_S3C6410_IIC1 S3C64XX_IRQ_VIC0(5)
-#define IRQ_S3C6410_IIS S3C64XX_IRQ_VIC0(6)
-#define IRQ_S3C6400_CAMIF_MP S3C64XX_IRQ_VIC0(6)
-#define IRQ_CAMIF_WE_C S3C64XX_IRQ_VIC0(7)
-#define IRQ_S3C6410_G3D S3C64XX_IRQ_VIC0(8)
-#define IRQ_S3C6400_CAMIF_WE_P S3C64XX_IRQ_VIC0(8)
-#define IRQ_POST0 S3C64XX_IRQ_VIC0(9)
-#define IRQ_ROTATOR S3C64XX_IRQ_VIC0(10)
-#define IRQ_2D S3C64XX_IRQ_VIC0(11)
-#define IRQ_TVENC S3C64XX_IRQ_VIC0(12)
-#define IRQ_SCALER S3C64XX_IRQ_VIC0(13)
-#define IRQ_BATF S3C64XX_IRQ_VIC0(14)
-#define IRQ_JPEG S3C64XX_IRQ_VIC0(15)
-#define IRQ_MFC S3C64XX_IRQ_VIC0(16)
-#define IRQ_SDMA0 S3C64XX_IRQ_VIC0(17)
-#define IRQ_SDMA1 S3C64XX_IRQ_VIC0(18)
-#define IRQ_ARM_DMAERR S3C64XX_IRQ_VIC0(19)
-#define IRQ_ARM_DMA S3C64XX_IRQ_VIC0(20)
-#define IRQ_ARM_DMAS S3C64XX_IRQ_VIC0(21)
-#define IRQ_KEYPAD S3C64XX_IRQ_VIC0(22)
-#define IRQ_TIMER0_VIC S3C64XX_IRQ_VIC0(23)
-#define IRQ_TIMER1_VIC S3C64XX_IRQ_VIC0(24)
-#define IRQ_TIMER2_VIC S3C64XX_IRQ_VIC0(25)
-#define IRQ_WDT S3C64XX_IRQ_VIC0(26)
-#define IRQ_TIMER3_VIC S3C64XX_IRQ_VIC0(27)
-#define IRQ_TIMER4_VIC S3C64XX_IRQ_VIC0(28)
-#define IRQ_LCD_FIFO S3C64XX_IRQ_VIC0(29)
-#define IRQ_LCD_VSYNC S3C64XX_IRQ_VIC0(30)
-#define IRQ_LCD_SYSTEM S3C64XX_IRQ_VIC0(31)
-
-/* VIC1 */
-
-#define IRQ_EINT12_19 S3C64XX_IRQ_VIC1(0)
-#define IRQ_EINT20_27 S3C64XX_IRQ_VIC1(1)
-#define IRQ_PCM0 S3C64XX_IRQ_VIC1(2)
-#define IRQ_PCM1 S3C64XX_IRQ_VIC1(3)
-#define IRQ_AC97 S3C64XX_IRQ_VIC1(4)
-#define IRQ_UART0 S3C64XX_IRQ_VIC1(5)
-#define IRQ_UART1 S3C64XX_IRQ_VIC1(6)
-#define IRQ_UART2 S3C64XX_IRQ_VIC1(7)
-#define IRQ_UART3 S3C64XX_IRQ_VIC1(8)
-#define IRQ_DMA0 S3C64XX_IRQ_VIC1(9)
-#define IRQ_DMA1 S3C64XX_IRQ_VIC1(10)
-#define IRQ_ONENAND0 S3C64XX_IRQ_VIC1(11)
-#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12)
-#define IRQ_NFC S3C64XX_IRQ_VIC1(13)
-#define IRQ_CFCON S3C64XX_IRQ_VIC1(14)
-#define IRQ_USBH S3C64XX_IRQ_VIC1(15)
-#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16)
-#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17)
-#define IRQ_IIC S3C64XX_IRQ_VIC1(18)
-#define IRQ_HSItx S3C64XX_IRQ_VIC1(19)
-#define IRQ_HSIrx S3C64XX_IRQ_VIC1(20)
-#define IRQ_RESERVED S3C64XX_IRQ_VIC1(21)
-#define IRQ_MSM S3C64XX_IRQ_VIC1(22)
-#define IRQ_HOSTIF S3C64XX_IRQ_VIC1(23)
-#define IRQ_HSMMC0 S3C64XX_IRQ_VIC1(24)
-#define IRQ_HSMMC1 S3C64XX_IRQ_VIC1(25)
-#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */
-#define IRQ_OTG S3C64XX_IRQ_VIC1(26)
-#define IRQ_IRDA S3C64XX_IRQ_VIC1(27)
-#define IRQ_RTC_ALARM S3C64XX_IRQ_VIC1(28)
-#define IRQ_SEC S3C64XX_IRQ_VIC1(29)
-#define IRQ_PENDN S3C64XX_IRQ_VIC1(30)
-#define IRQ_TC IRQ_PENDN
-#define IRQ_ADC S3C64XX_IRQ_VIC1(31)
-
-/* compatibility for device defines */
-
-#define IRQ_IIC1 IRQ_S3C6410_IIC1
-
-/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
- * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
- * which we place after the pair of VICs. */
-
-#define S3C_IRQ_EINT_BASE S3C_IRQ(64+5)
-
-#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
-#define IRQ_EINT(x) S3C_EINT(x)
-#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0))
-
-/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
- * that they are sourced from the GPIO pins but with a different scheme for
- * priority and source indication.
- *
- * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
- * interrupts, but for historical reasons they are kept apart from these
- * next interrupts.
- *
- * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
- * machine specific support files.
- */
-
-#define IRQ_EINT_GROUP1_NR (15)
-#define IRQ_EINT_GROUP2_NR (8)
-#define IRQ_EINT_GROUP3_NR (5)
-#define IRQ_EINT_GROUP4_NR (14)
-#define IRQ_EINT_GROUP5_NR (7)
-#define IRQ_EINT_GROUP6_NR (10)
-#define IRQ_EINT_GROUP7_NR (16)
-#define IRQ_EINT_GROUP8_NR (15)
-#define IRQ_EINT_GROUP9_NR (9)
-
-#define IRQ_EINT_GROUP_BASE S3C_EINT(28)
-#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0x00)
-#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
-#define IRQ_EINT_GROUP3_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
-#define IRQ_EINT_GROUP4_BASE (IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
-#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
-#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
-#define IRQ_EINT_GROUP7_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
-#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
-#define IRQ_EINT_GROUP9_BASE (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
-
-#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
-
-/* Some boards have their own IRQs behind this */
-#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
-
-/* Set the default nr_irqs, boards can override if necessary */
-#define S3C64XX_NR_IRQS IRQ_BOARD_START
-
-/* Compatibility */
-
-#define IRQ_ONENAND IRQ_ONENAND0
-#define IRQ_I2S0 IRQ_S3C6410_IIS
-
-#endif /* __ASM_MACH_S3C64XX_IRQS_H */
-
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - Memory map definitions
- */
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s3c.h>
-
-/*
- * Post-mux Chip Select Regions Xm0CSn_
- * These may be used by SROM, NAND or CF depending on settings
- */
-
-#define S3C64XX_PA_XM0CSN0 (0x10000000)
-#define S3C64XX_PA_XM0CSN1 (0x18000000)
-#define S3C64XX_PA_XM0CSN2 (0x20000000)
-#define S3C64XX_PA_XM0CSN3 (0x28000000)
-#define S3C64XX_PA_XM0CSN4 (0x30000000)
-#define S3C64XX_PA_XM0CSN5 (0x38000000)
-
-/* HSMMC units */
-#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000))
-#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0)
-#define S3C64XX_PA_HSMMC1 S3C64XX_PA_HSMMC(1)
-#define S3C64XX_PA_HSMMC2 S3C64XX_PA_HSMMC(2)
-
-#define S3C_PA_UART (0x7F005000)
-#define S3C_PA_UART0 (S3C_PA_UART + 0x00)
-#define S3C_PA_UART1 (S3C_PA_UART + 0x400)
-#define S3C_PA_UART2 (S3C_PA_UART + 0x800)
-#define S3C_PA_UART3 (S3C_PA_UART + 0xC00)
-#define S3C_UART_OFFSET (0x400)
-
-/* See notes on UART VA mapping in debug-macro.S */
-#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
-
-#define S3C_VA_UART0 S3C_VA_UARTx(0)
-#define S3C_VA_UART1 S3C_VA_UARTx(1)
-#define S3C_VA_UART2 S3C_VA_UARTx(2)
-#define S3C_VA_UART3 S3C_VA_UARTx(3)
-
-#define S3C64XX_PA_SROM (0x70000000)
-
-#define S3C64XX_PA_ONENAND0 (0x70100000)
-#define S3C64XX_PA_ONENAND0_BUF (0x20000000)
-#define S3C64XX_SZ_ONENAND0_BUF (SZ_64M)
-
-/* NAND and OneNAND1 controllers occupy the same register region
- (depending on SoC POP version) */
-#define S3C64XX_PA_ONENAND1 (0x70200000)
-#define S3C64XX_PA_ONENAND1_BUF (0x28000000)
-#define S3C64XX_SZ_ONENAND1_BUF (SZ_64M)
-
-#define S3C64XX_PA_NAND (0x70200000)
-#define S3C64XX_PA_FB (0x77100000)
-#define S3C64XX_PA_USB_HSOTG (0x7C000000)
-#define S3C64XX_PA_WATCHDOG (0x7E004000)
-#define S3C64XX_PA_RTC (0x7E005000)
-#define S3C64XX_PA_KEYPAD (0x7E00A000)
-#define S3C64XX_PA_ADC (0x7E00B000)
-#define S3C64XX_PA_SYSCON (0x7E00F000)
-#define S3C64XX_PA_AC97 (0x7F001000)
-#define S3C64XX_PA_IIS0 (0x7F002000)
-#define S3C64XX_PA_IIS1 (0x7F003000)
-#define S3C64XX_PA_TIMER (0x7F006000)
-#define S3C64XX_PA_IIC0 (0x7F004000)
-#define S3C64XX_PA_SPI0 (0x7F00B000)
-#define S3C64XX_PA_SPI1 (0x7F00C000)
-#define S3C64XX_PA_PCM0 (0x7F009000)
-#define S3C64XX_PA_PCM1 (0x7F00A000)
-#define S3C64XX_PA_IISV4 (0x7F00D000)
-#define S3C64XX_PA_IIC1 (0x7F00F000)
-
-#define S3C64XX_PA_GPIO (0x7F008000)
-#define S3C64XX_SZ_GPIO SZ_4K
-
-#define S3C64XX_PA_SDRAM (0x50000000)
-
-#define S3C64XX_PA_CFCON (0x70300000)
-
-#define S3C64XX_PA_VIC0 (0x71200000)
-#define S3C64XX_PA_VIC1 (0x71300000)
-
-#define S3C64XX_PA_MODEM (0x74108000)
-
-#define S3C64XX_PA_USBHOST (0x74300000)
-
-#define S3C64XX_PA_USB_HSPHY (0x7C100000)
-
-/* compatibility defines. */
-#define S3C_PA_TIMER S3C64XX_PA_TIMER
-#define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0
-#define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1
-#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2
-#define S3C_PA_IIC S3C64XX_PA_IIC0
-#define S3C_PA_IIC1 S3C64XX_PA_IIC1
-#define S3C_PA_NAND S3C64XX_PA_NAND
-#define S3C_PA_ONENAND S3C64XX_PA_ONENAND0
-#define S3C_PA_ONENAND_BUF S3C64XX_PA_ONENAND0_BUF
-#define S3C_SZ_ONENAND_BUF S3C64XX_SZ_ONENAND0_BUF
-#define S3C_PA_FB S3C64XX_PA_FB
-#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
-#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
-#define S3C_PA_RTC S3C64XX_PA_RTC
-#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
-#define S3C_PA_SPI0 S3C64XX_PA_SPI0
-#define S3C_PA_SPI1 S3C64XX_PA_SPI1
-
-#define SAMSUNG_PA_ADC S3C64XX_PA_ADC
-#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON
-#define SAMSUNG_PA_KEYPAD S3C64XX_PA_KEYPAD
-#define SAMSUNG_PA_TIMER S3C64XX_PA_TIMER
-
-#endif /* __ASM_ARCH_6400_MAP_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
- */
-
-#ifndef __MACH_S3C64XX_PM_CORE_H
-#define __MACH_S3C64XX_PM_CORE_H __FILE__
-
-#include <linux/serial_s3c.h>
-#include <linux/delay.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <mach/map.h>
-
-static inline void s3c_pm_debug_init_uart(void)
-{
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
- u32 tmp = __raw_readl(S3C_PCLK_GATE);
-
- /* As a note, since the S3C64XX UARTs generally have multiple
- * clock sources, we simply enable PCLK at the moment and hope
- * that the resume settings for the UART are suitable for the
- * use with PCLK.
- */
-
- tmp |= S3C_CLKCON_PCLK_UART0;
- tmp |= S3C_CLKCON_PCLK_UART1;
- tmp |= S3C_CLKCON_PCLK_UART2;
- tmp |= S3C_CLKCON_PCLK_UART3;
-
- __raw_writel(tmp, S3C_PCLK_GATE);
- udelay(10);
-#endif
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
- /* VIC should have already been taken care of */
-
- /* clear any pending EINT0 interrupts */
- __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
-}
-
-/* make these defines, we currently do not have any need to change
- * the IRQ wake controls depending on the CPU we are running on */
-#ifdef CONFIG_PM_SLEEP
-#define s3c_irqwake_eintallow ((1 << 28) - 1)
-#define s3c_irqwake_intallow (~0)
-#else
-#define s3c_irqwake_eintallow 0
-#define s3c_irqwake_intallow 0
-#endif
-
-static inline void s3c_pm_restored_gpios(void)
-{
- /* ensure sleep mode has been cleared from the system */
-
- __raw_writel(0, S3C64XX_SLPEN);
-}
-
-static inline void samsung_pm_saved_gpios(void)
-{
- /* turn on the sleep mode and keep it there, as it seems that during
- * suspend the xCON registers get re-set and thus you can end up with
- * problems between going to sleep and resuming.
- */
-
- __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN);
-}
-#endif /* __MACH_S3C64XX_PM_CORE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX clock register definitions
- */
-
-#ifndef __PLAT_REGS_CLOCK_H
-#define __PLAT_REGS_CLOCK_H __FILE__
-
-/*
- * FIXME: Remove remaining definitions
- */
-
-#define S3C_CLKREG(x) (S3C_VA_SYS + (x))
-
-#define S3C_PCLK_GATE S3C_CLKREG(0x34)
-#define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
-#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120)
-
-/* PCLK GATE Registers */
-#define S3C_CLKCON_PCLK_UART3 (1<<4)
-#define S3C_CLKCON_PCLK_UART2 (1<<3)
-#define S3C_CLKCON_PCLK_UART1 (1<<2)
-#define S3C_CLKCON_PCLK_UART0 (1<<1)
-
-/* MEM_SYS_CFG */
-#define MEM_SYS_CFG_INDEP_CF 0x4000
-#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
-
-#endif /* _PLAT_REGS_CLOCK_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIO register definitions
- */
-
-#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H
-#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__
-
-/* Base addresses for each of the banks */
-
-#define S3C64XX_GPIOREG(reg) (S3C64XX_VA_GPIO + (reg))
-
-#define S3C64XX_GPA_BASE S3C64XX_GPIOREG(0x0000)
-#define S3C64XX_GPB_BASE S3C64XX_GPIOREG(0x0020)
-#define S3C64XX_GPC_BASE S3C64XX_GPIOREG(0x0040)
-#define S3C64XX_GPD_BASE S3C64XX_GPIOREG(0x0060)
-#define S3C64XX_GPE_BASE S3C64XX_GPIOREG(0x0080)
-#define S3C64XX_GPF_BASE S3C64XX_GPIOREG(0x00A0)
-#define S3C64XX_GPG_BASE S3C64XX_GPIOREG(0x00C0)
-#define S3C64XX_GPH_BASE S3C64XX_GPIOREG(0x00E0)
-#define S3C64XX_GPI_BASE S3C64XX_GPIOREG(0x0100)
-#define S3C64XX_GPJ_BASE S3C64XX_GPIOREG(0x0120)
-#define S3C64XX_GPK_BASE S3C64XX_GPIOREG(0x0800)
-#define S3C64XX_GPL_BASE S3C64XX_GPIOREG(0x0810)
-#define S3C64XX_GPM_BASE S3C64XX_GPIOREG(0x0820)
-#define S3C64XX_GPN_BASE S3C64XX_GPIOREG(0x0830)
-#define S3C64XX_GPO_BASE S3C64XX_GPIOREG(0x0140)
-#define S3C64XX_GPP_BASE S3C64XX_GPIOREG(0x0160)
-#define S3C64XX_GPQ_BASE S3C64XX_GPIOREG(0x0180)
-
-/* SPCON */
-
-#define S3C64XX_SPCON S3C64XX_GPIOREG(0x1A0)
-
-#define S3C64XX_SPCON_DRVCON_CAM_MASK (0x3 << 30)
-#define S3C64XX_SPCON_DRVCON_CAM_SHIFT (30)
-#define S3C64XX_SPCON_DRVCON_CAM_2mA (0x0 << 30)
-#define S3C64XX_SPCON_DRVCON_CAM_4mA (0x1 << 30)
-#define S3C64XX_SPCON_DRVCON_CAM_7mA (0x2 << 30)
-#define S3C64XX_SPCON_DRVCON_CAM_9mA (0x3 << 30)
-
-#define S3C64XX_SPCON_DRVCON_HSSPI_MASK (0x3 << 28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT (28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_2mA (0x0 << 28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_4mA (0x1 << 28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_7mA (0x2 << 28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_9mA (0x3 << 28)
-
-#define S3C64XX_SPCON_DRVCON_HSMMC_MASK (0x3 << 26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT (26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_2mA (0x0 << 26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_4mA (0x1 << 26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_7mA (0x2 << 26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_9mA (0x3 << 26)
-
-#define S3C64XX_SPCON_DRVCON_LCD_MASK (0x3 << 24)
-#define S3C64XX_SPCON_DRVCON_LCD_SHIFT (24)
-#define S3C64XX_SPCON_DRVCON_LCD_2mA (0x0 << 24)
-#define S3C64XX_SPCON_DRVCON_LCD_4mA (0x1 << 24)
-#define S3C64XX_SPCON_DRVCON_LCD_7mA (0x2 << 24)
-#define S3C64XX_SPCON_DRVCON_LCD_9mA (0x3 << 24)
-
-#define S3C64XX_SPCON_DRVCON_MODEM_MASK (0x3 << 22)
-#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT (22)
-#define S3C64XX_SPCON_DRVCON_MODEM_2mA (0x0 << 22)
-#define S3C64XX_SPCON_DRVCON_MODEM_4mA (0x1 << 22)
-#define S3C64XX_SPCON_DRVCON_MODEM_7mA (0x2 << 22)
-#define S3C64XX_SPCON_DRVCON_MODEM_9mA (0x3 << 22)
-
-#define S3C64XX_SPCON_nRSTOUT_OEN (1 << 21)
-
-#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK (0x3 << 18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT (18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA (0x0 << 18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA (0x1 << 18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA (0x2 << 18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA (0x3 << 18)
-
-#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK (0x3 << 16)
-#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT (16)
-#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED (0x0 << 16)
-#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN (0x1 << 16)
-#define S3C64XX_SPCON_MEM1_DQS_PUD_UP (0x2 << 16)
-
-#define S3C64XX_SPCON_MEM1_D_PUD1_MASK (0x3 << 14)
-#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT (14)
-#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED (0x0 << 14)
-#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN (0x1 << 14)
-#define S3C64XX_SPCON_MEM1_D_PUD1_UP (0x2 << 14)
-
-#define S3C64XX_SPCON_MEM1_D_PUD0_MASK (0x3 << 12)
-#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT (12)
-#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED (0x0 << 12)
-#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN (0x1 << 12)
-#define S3C64XX_SPCON_MEM1_D_PUD0_UP (0x2 << 12)
-
-#define S3C64XX_SPCON_MEM0_D_PUD_MASK (0x3 << 8)
-#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT (8)
-#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED (0x0 << 8)
-#define S3C64XX_SPCON_MEM0_D_PUD_DOWN (0x1 << 8)
-#define S3C64XX_SPCON_MEM0_D_PUD_UP (0x2 << 8)
-
-#define S3C64XX_SPCON_USBH_DMPD (1 << 7)
-#define S3C64XX_SPCON_USBH_DPPD (1 << 6)
-#define S3C64XX_SPCON_USBH_PUSW2 (1 << 5)
-#define S3C64XX_SPCON_USBH_PUSW1 (1 << 4)
-#define S3C64XX_SPCON_USBH_SUSPND (1 << 3)
-
-#define S3C64XX_SPCON_LCD_SEL_MASK (0x3 << 0)
-#define S3C64XX_SPCON_LCD_SEL_SHIFT (0)
-#define S3C64XX_SPCON_LCD_SEL_HOST (0x0 << 0)
-#define S3C64XX_SPCON_LCD_SEL_RGB (0x1 << 0)
-#define S3C64XX_SPCON_LCD_SEL_606_656 (0x2 << 0)
-
-
-/* External interrupt registers */
-
-#define S3C64XX_EINT12CON S3C64XX_GPIOREG(0x200)
-#define S3C64XX_EINT34CON S3C64XX_GPIOREG(0x204)
-#define S3C64XX_EINT56CON S3C64XX_GPIOREG(0x208)
-#define S3C64XX_EINT78CON S3C64XX_GPIOREG(0x20C)
-#define S3C64XX_EINT9CON S3C64XX_GPIOREG(0x210)
-
-#define S3C64XX_EINT12FLTCON S3C64XX_GPIOREG(0x220)
-#define S3C64XX_EINT34FLTCON S3C64XX_GPIOREG(0x224)
-#define S3C64XX_EINT56FLTCON S3C64XX_GPIOREG(0x228)
-#define S3C64XX_EINT78FLTCON S3C64XX_GPIOREG(0x22C)
-#define S3C64XX_EINT9FLTCON S3C64XX_GPIOREG(0x230)
-
-#define S3C64XX_EINT12MASK S3C64XX_GPIOREG(0x240)
-#define S3C64XX_EINT34MASK S3C64XX_GPIOREG(0x244)
-#define S3C64XX_EINT56MASK S3C64XX_GPIOREG(0x248)
-#define S3C64XX_EINT78MASK S3C64XX_GPIOREG(0x24C)
-#define S3C64XX_EINT9MASK S3C64XX_GPIOREG(0x250)
-
-#define S3C64XX_EINT12PEND S3C64XX_GPIOREG(0x260)
-#define S3C64XX_EINT34PEND S3C64XX_GPIOREG(0x264)
-#define S3C64XX_EINT56PEND S3C64XX_GPIOREG(0x268)
-#define S3C64XX_EINT78PEND S3C64XX_GPIOREG(0x26C)
-#define S3C64XX_EINT9PEND S3C64XX_GPIOREG(0x270)
-
-#define S3C64XX_PRIORITY S3C64XX_GPIOREG(0x280)
-#define S3C64XX_PRIORITY_ARB(x) (1 << (x))
-
-#define S3C64XX_SERVICE S3C64XX_GPIOREG(0x284)
-#define S3C64XX_SERVICEPEND S3C64XX_GPIOREG(0x288)
-
-#define S3C64XX_EINT0CON0 S3C64XX_GPIOREG(0x900)
-#define S3C64XX_EINT0CON1 S3C64XX_GPIOREG(0x904)
-#define S3C64XX_EINT0FLTCON0 S3C64XX_GPIOREG(0x910)
-#define S3C64XX_EINT0FLTCON1 S3C64XX_GPIOREG(0x914)
-#define S3C64XX_EINT0FLTCON2 S3C64XX_GPIOREG(0x918)
-#define S3C64XX_EINT0FLTCON3 S3C64XX_GPIOREG(0x91C)
-
-#define S3C64XX_EINT0MASK S3C64XX_GPIOREG(0x920)
-#define S3C64XX_EINT0PEND S3C64XX_GPIOREG(0x924)
-
-/* GPIO sleep configuration */
-
-#define S3C64XX_SPCONSLP S3C64XX_GPIOREG(0x880)
-
-#define S3C64XX_SPCONSLP_TDO_PULLDOWN (1 << 14)
-#define S3C64XX_SPCONSLP_CKE1INIT (1 << 5)
-
-#define S3C64XX_SPCONSLP_RSTOUT_MASK (0x3 << 12)
-#define S3C64XX_SPCONSLP_RSTOUT_OUT0 (0x0 << 12)
-#define S3C64XX_SPCONSLP_RSTOUT_OUT1 (0x1 << 12)
-#define S3C64XX_SPCONSLP_RSTOUT_HIZ (0x2 << 12)
-
-#define S3C64XX_SPCONSLP_KPCOL_MASK (0x3 << 0)
-#define S3C64XX_SPCONSLP_KPCOL_OUT0 (0x0 << 0)
-#define S3C64XX_SPCONSLP_KPCOL_OUT1 (0x1 << 0)
-#define S3C64XX_SPCONSLP_KPCOL_INP (0x2 << 0)
-
-
-#define S3C64XX_SLPEN S3C64XX_GPIOREG(0x930)
-
-#define S3C64XX_SLPEN_USE_xSLP (1 << 0)
-#define S3C64XX_SLPEN_CFG_BYSLPEN (1 << 1)
-
-#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
-
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - IRQ register definitions
- */
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-
-#endif /* __ASM_ARCH_6400_REGS_IRQ_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// S3C64XX - Interrupt handling Power Management
-
-/*
- * NOTE: Code in this file is not used when booting with Device Tree support.
- */
-
-#include <linux/kernel.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/of.h>
-
-#include <mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-/* We handled all the IRQ types in this code, to save having to make several
- * small files to handle each different type separately. Having the EINT_GRP
- * code here shouldn't be as much bloat as the IRQ table space needed when
- * they are enabled. The added benefit is we ensure that these registers are
- * in the same state as we suspended.
- */
-
-static struct sleep_save irq_save[] = {
- SAVE_ITEM(S3C64XX_PRIORITY),
- SAVE_ITEM(S3C64XX_EINT0CON0),
- SAVE_ITEM(S3C64XX_EINT0CON1),
- SAVE_ITEM(S3C64XX_EINT0FLTCON0),
- SAVE_ITEM(S3C64XX_EINT0FLTCON1),
- SAVE_ITEM(S3C64XX_EINT0FLTCON2),
- SAVE_ITEM(S3C64XX_EINT0FLTCON3),
- SAVE_ITEM(S3C64XX_EINT0MASK),
-};
-
-static struct irq_grp_save {
- u32 fltcon;
- u32 con;
- u32 mask;
-} eint_grp_save[5];
-
-#ifndef CONFIG_SERIAL_SAMSUNG_UARTS
-#define SERIAL_SAMSUNG_UARTS 0
-#else
-#define SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS
-#endif
-
-static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS];
-
-static int s3c64xx_irq_pm_suspend(void)
-{
- struct irq_grp_save *grp = eint_grp_save;
- int i;
-
- S3C_PMDBG("%s: suspending IRQs\n", __func__);
-
- s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-
- for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
- irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
-
- for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
- grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
- grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
- grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
- }
-
- return 0;
-}
-
-static void s3c64xx_irq_pm_resume(void)
-{
- struct irq_grp_save *grp = eint_grp_save;
- int i;
-
- S3C_PMDBG("%s: resuming IRQs\n", __func__);
-
- s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-
- for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
- __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
-
- for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
- __raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
- __raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
- __raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
- }
-
- S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
-}
-
-static struct syscore_ops s3c64xx_irq_syscore_ops = {
- .suspend = s3c64xx_irq_pm_suspend,
- .resume = s3c64xx_irq_pm_resume,
-};
-
-static __init int s3c64xx_syscore_init(void)
-{
- /* Appropriate drivers (pinctrl, uart) handle this when using DT. */
- if (of_have_populated_dt() || !soc_is_s3c64xx())
- return 0;
-
- register_syscore_ops(&s3c64xx_irq_syscore_ops);
-
- return 0;
-}
-
-core_initcall(s3c64xx_syscore_init);
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for Samsung SoC UART IRQ demux for S3C64XX and later
- */
-
-struct s3c_uart_irq {
- void __iomem *regs;
- unsigned int base_irq;
- unsigned int parent_irq;
-};
-
-extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs);
-
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-// Copyright 2009 Kwangwoo Lee
-// Kwangwoo Lee <kwangwoo.lee@gmail.com>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/dm9000.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/fb.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <mach/irqs.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include "common.h"
-#include "regs-modem.h"
-
-/* DM9000 */
-#define ANW6410_PA_DM9000 (0x18000000)
-
-/* A hardware buffer to control external devices is mapped at 0x30000000.
- * It can not be read. So current status must be kept in anw6410_extdev_status.
- */
-#define ANW6410_VA_EXTDEV S3C_ADDR(0x02000000)
-#define ANW6410_PA_EXTDEV (0x30000000)
-
-#define ANW6410_EN_DM9000 (1<<11)
-#define ANW6410_EN_LCD (1<<14)
-
-static __u32 anw6410_extdev_status;
-
-static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
-};
-
-/* framebuffer and LCD setup. */
-static void __init anw6410_lcd_mode_set(void)
-{
- u32 tmp;
-
- /* set the LCD type */
- tmp = __raw_readl(S3C64XX_SPCON);
- tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
- tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
- __raw_writel(tmp, S3C64XX_SPCON);
-
- /* remove the LCD bypass */
- tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
- tmp &= ~MIFPCON_LCD_BYPASS;
- __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/* GPF1 = LCD panel power
- * GPF4 = LCD backlight control
- */
-static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
- anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
- __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-
- gpio_direction_output(S3C64XX_GPF(1), 1);
- gpio_direction_output(S3C64XX_GPF(4), 1);
- } else {
- anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
- __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-
- gpio_direction_output(S3C64XX_GPF(1), 0);
- gpio_direction_output(S3C64XX_GPF(4), 0);
- }
-}
-
-static struct plat_lcd_data anw6410_lcd_power_data = {
- .set_power = anw6410_lcd_power_set,
-};
-
-static struct platform_device anw6410_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &anw6410_lcd_power_data,
-};
-
-static struct s3c_fb_pd_win anw6410_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode anw6410_lcd_timing = {
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .vtiming = &anw6410_lcd_timing,
- .win[0] = &anw6410_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-static void __init anw6410_dm9000_enable(void)
-{
- anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
- __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-}
-
-static struct resource anw6410_dm9000_resource[] = {
- [0] = DEFINE_RES_MEM(ANW6410_PA_DM9000, 4),
- [1] = DEFINE_RES_MEM(ANW6410_PA_DM9000 + 4, 501),
- [2] = DEFINE_RES_NAMED(IRQ_EINT(15), 1, NULL, IORESOURCE_IRQ \
- | IRQF_TRIGGER_HIGH),
-};
-
-static struct dm9000_plat_data anw6410_dm9000_pdata = {
- .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
- /* dev_addr can be set to provide hwaddr. */
-};
-
-static struct platform_device anw6410_device_eth = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(anw6410_dm9000_resource),
- .resource = anw6410_dm9000_resource,
- .dev = {
- .platform_data = &anw6410_dm9000_pdata,
- },
-};
-
-static struct map_desc anw6410_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)ANW6410_VA_EXTDEV,
- .pfn = __phys_to_pfn(ANW6410_PA_EXTDEV),
- .length = SZ_64K,
- .type = MT_DEVICE,
- },
-};
-
-static struct platform_device *anw6410_devices[] __initdata = {
- &s3c_device_fb,
- &anw6410_lcd_powerdev,
- &anw6410_device_eth,
-};
-
-static void __init anw6410_map_io(void)
-{
- s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
- s3c64xx_set_xtal_freq(12000000);
- s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-
- anw6410_lcd_mode_set();
-}
-
-static void __init anw6410_machine_init(void)
-{
- s3c_fb_set_platdata(&anw6410_lcd_pdata);
-
- gpio_request(S3C64XX_GPF(1), "panel power");
- gpio_request(S3C64XX_GPF(4), "LCD backlight");
-
- anw6410_dm9000_enable();
-
- platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
-}
-
-MACHINE_START(ANW6410, "A&W6410")
- /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
- .atag_offset = 0x100,
- .nr_irqs = S3C64XX_NR_IRQS,
- .init_irq = s3c6410_init_irq,
- .map_io = anw6410_map_io,
- .init_machine = anw6410_machine_init,
- .init_time = samsung_timer_init,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Speyside modules for Cragganmore - board data probing
-//
-// Copyright 2011 Wolfson Microelectronics plc
-// Mark Brown <broonie@opensource.wolfsonmicro.com>
-
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio/machine.h>
-
-#include <linux/mfd/wm831x/irq.h>
-#include <linux/mfd/wm831x/gpio.h>
-#include <linux/mfd/wm8994/pdata.h>
-#include <linux/mfd/arizona/pdata.h>
-
-#include <linux/regulator/machine.h>
-
-#include <sound/wm0010.h>
-#include <sound/wm2200.h>
-#include <sound/wm5100.h>
-#include <sound/wm8996.h>
-#include <sound/wm8962.h>
-#include <sound/wm9081.h>
-
-#include <linux/platform_data/spi-s3c64xx.h>
-
-#include <plat/cpu.h>
-#include <mach/irqs.h>
-
-#include "crag6410.h"
-
-static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
- .line = S3C64XX_GPC(3),
-};
-
-static struct wm0010_pdata wm0010_pdata = {
- .gpio_reset = S3C64XX_GPN(6),
- .reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
-};
-
-static struct spi_board_info wm1253_devs[] = {
- [0] = {
- .modalias = "wm0010",
- .max_speed_hz = 26 * 1000 * 1000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- .irq = S3C_EINT(4),
- .controller_data = &wm0010_spi_csinfo,
- .platform_data = &wm0010_pdata,
- },
-};
-
-static struct spi_board_info balblair_devs[] = {
- [0] = {
- .modalias = "wm0010",
- .max_speed_hz = 26 * 1000 * 1000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- .irq = S3C_EINT(4),
- .controller_data = &wm0010_spi_csinfo,
- .platform_data = &wm0010_pdata,
- },
-};
-
-static struct wm5100_pdata wm5100_pdata = {
- .ldo_ena = S3C64XX_GPN(7),
- .irq_flags = IRQF_TRIGGER_HIGH,
- .gpio_base = CODEC_GPIO_BASE,
-
- .in_mode = {
- WM5100_IN_DIFF,
- WM5100_IN_DIFF,
- WM5100_IN_DIFF,
- WM5100_IN_SE,
- },
-
- .hp_pol = CODEC_GPIO_BASE + 3,
- .jack_modes = {
- { WM5100_MICDET_MICBIAS3, 0, 0 },
- { WM5100_MICDET_MICBIAS2, 1, 1 },
- },
-
- .gpio_defaults = {
- 0,
- 0,
- 0,
- 0,
- 0x2, /* IRQ: CMOS output */
- 0x3, /* CLKOUT: CMOS output */
- },
-};
-
-static struct wm8996_retune_mobile_config wm8996_retune[] = {
- {
- .name = "Sub LPF",
- .rate = 48000,
- .regs = {
- 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
- 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
- 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
- },
- },
- {
- .name = "Sub HPF",
- .rate = 48000,
- .regs = {
- 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
- 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
- 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
- },
- },
-};
-
-static struct wm8996_pdata wm8996_pdata __initdata = {
- .ldo_ena = S3C64XX_GPN(7),
- .gpio_base = CODEC_GPIO_BASE,
- .micdet_def = 1,
- .inl_mode = WM8996_DIFFERRENTIAL_1,
- .inr_mode = WM8996_DIFFERRENTIAL_1,
-
- .irq_flags = IRQF_TRIGGER_RISING,
-
- .gpio_default = {
- 0x8001, /* GPIO1 == ADCLRCLK1 */
- 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
- 0x0141, /* GPIO3 == HP_SEL */
- 0x0002, /* GPIO4 == IRQ */
- 0x020e, /* GPIO5 == CLKOUT */
- },
-
- .retune_mobile_cfgs = wm8996_retune,
- .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
-};
-
-static struct wm8962_pdata wm8962_pdata __initdata = {
- .gpio_init = {
- 0,
- WM8962_GPIO_FN_OPCLK,
- WM8962_GPIO_FN_DMICCLK,
- 0,
- 0x8000 | WM8962_GPIO_FN_DMICDAT,
- WM8962_GPIO_FN_IRQ, /* Open drain mode */
- },
- .in4_dc_measure = true,
-};
-
-static struct wm9081_pdata wm9081_pdata __initdata = {
- .irq_high = false,
- .irq_cmos = false,
-};
-
-static const struct i2c_board_info wm1254_devs[] = {
- { I2C_BOARD_INFO("wm8996", 0x1a),
- .platform_data = &wm8996_pdata,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
- },
- { I2C_BOARD_INFO("wm9081", 0x6c),
- .platform_data = &wm9081_pdata, },
-};
-
-static const struct i2c_board_info wm1255_devs[] = {
- { I2C_BOARD_INFO("wm5100", 0x1a),
- .platform_data = &wm5100_pdata,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
- },
- { I2C_BOARD_INFO("wm9081", 0x6c),
- .platform_data = &wm9081_pdata, },
-};
-
-static const struct i2c_board_info wm1259_devs[] = {
- { I2C_BOARD_INFO("wm8962", 0x1a),
- .platform_data = &wm8962_pdata,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
- },
-};
-
-static struct regulator_init_data wm8994_ldo1 = {
- .supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data wm8994_ldo2 = {
- .supply_regulator = "WALLVDD",
-};
-
-static struct wm8994_pdata wm8994_pdata = {
- .gpio_base = CODEC_GPIO_BASE,
- .micb2_delay = 150,
- .gpio_defaults = {
- 0x3, /* IRQ out, active high, CMOS */
- },
- .ldo = {
- { .init_data = &wm8994_ldo1, },
- { .init_data = &wm8994_ldo2, },
- },
-};
-
-static const struct i2c_board_info wm1277_devs[] = {
- { I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */
- .platform_data = &wm8994_pdata,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
- .dev_name = "wm8958",
- },
-};
-
-static struct gpiod_lookup_table wm8994_gpiod_table = {
- .dev_id = "i2c-wm8958", /* I2C device name */
- .table = {
- GPIO_LOOKUP("GPION", 6,
- "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPION", 4,
- "wlf,ldo2ena", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct arizona_pdata wm5102_reva_pdata = {
- .gpio_base = CODEC_GPIO_BASE,
- .irq_flags = IRQF_TRIGGER_HIGH,
- .micd_pol_gpio = CODEC_GPIO_BASE + 4,
- .micd_rate = 6,
- .gpio_defaults = {
- [2] = 0x10000, /* AIF3TXLRCLK */
- [3] = 0x4, /* OPCLK */
- },
-};
-
-static struct s3c64xx_spi_csinfo codec_spi_csinfo = {
- .line = S3C64XX_GPN(5),
-};
-
-static struct spi_board_info wm5102_reva_spi_devs[] = {
- [0] = {
- .modalias = "wm5102",
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE +
- WM831X_IRQ_GPIO_2,
- .controller_data = &codec_spi_csinfo,
- .platform_data = &wm5102_reva_pdata,
- },
-};
-
-static struct gpiod_lookup_table wm5102_reva_gpiod_table = {
- .dev_id = "spi0.1", /* SPI device name */
- .table = {
- GPIO_LOOKUP("GPION", 7,
- "wlf,ldoena", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct arizona_pdata wm5102_pdata = {
- .gpio_base = CODEC_GPIO_BASE,
- .irq_flags = IRQF_TRIGGER_HIGH,
- .micd_pol_gpio = CODEC_GPIO_BASE + 2,
- .gpio_defaults = {
- [2] = 0x10000, /* AIF3TXLRCLK */
- [3] = 0x4, /* OPCLK */
- },
-};
-
-static struct spi_board_info wm5102_spi_devs[] = {
- [0] = {
- .modalias = "wm5102",
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE +
- WM831X_IRQ_GPIO_2,
- .controller_data = &codec_spi_csinfo,
- .platform_data = &wm5102_pdata,
- },
-};
-
-static struct gpiod_lookup_table wm5102_gpiod_table = {
- .dev_id = "spi0.1", /* SPI device name */
- .table = {
- GPIO_LOOKUP("GPION", 7,
- "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct spi_board_info wm5110_spi_devs[] = {
- [0] = {
- .modalias = "wm5110",
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE +
- WM831X_IRQ_GPIO_2,
- .controller_data = &codec_spi_csinfo,
- .platform_data = &wm5102_reva_pdata,
- },
-};
-
-static const struct i2c_board_info wm6230_i2c_devs[] = {
- { I2C_BOARD_INFO("wm9081", 0x6c),
- .platform_data = &wm9081_pdata, },
-};
-
-static struct wm2200_pdata wm2200_pdata = {
- .ldo_ena = S3C64XX_GPN(7),
- .gpio_defaults = {
- [2] = 0x0005, /* GPIO3 24.576MHz output clock */
- },
-};
-
-static const struct i2c_board_info wm2200_i2c[] = {
- { I2C_BOARD_INFO("wm2200", 0x3a),
- .platform_data = &wm2200_pdata, },
-};
-
-static const struct {
- u8 id;
- u8 rev;
- const char *name;
- const struct i2c_board_info *i2c_devs;
- int num_i2c_devs;
- const struct spi_board_info *spi_devs;
- int num_spi_devs;
-
- struct gpiod_lookup_table *gpiod_table;
-} gf_mods[] = {
- { .id = 0x01, .rev = 0xff, .name = "1250-EV1 Springbank" },
- { .id = 0x02, .rev = 0xff, .name = "1251-EV1 Jura" },
- { .id = 0x03, .rev = 0xff, .name = "1252-EV1 Glenlivet" },
- { .id = 0x06, .rev = 0xff, .name = "WM8997-6721-CS96-EV1 Lapraoig" },
- { .id = 0x07, .rev = 0xff, .name = "WM5110-6271 Deanston",
- .spi_devs = wm5110_spi_devs,
- .num_spi_devs = ARRAY_SIZE(wm5110_spi_devs) },
- { .id = 0x08, .rev = 0xff, .name = "WM8903-6102 Tamdhu" },
- { .id = 0x09, .rev = 0xff, .name = "WM1811A-6305 Adelphi" },
- { .id = 0x0a, .rev = 0xff, .name = "WM8996-6272 Blackadder" },
- { .id = 0x0b, .rev = 0xff, .name = "WM8994-6235 Benromach" },
- { .id = 0x11, .rev = 0xff, .name = "6249-EV2 Glenfarclas", },
- { .id = 0x14, .rev = 0xff, .name = "6271-EV1 Lochnagar" },
- { .id = 0x15, .rev = 0xff, .name = "6320-EV1 Bells",
- .i2c_devs = wm6230_i2c_devs,
- .num_i2c_devs = ARRAY_SIZE(wm6230_i2c_devs) },
- { .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
- { .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
- { .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
- .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
- { .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
- { .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
- { .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",
- .spi_devs = balblair_devs,
- .num_spi_devs = ARRAY_SIZE(balblair_devs) },
- { .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu",
- .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
- { .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory",
- .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
- { .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman",
- .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
- { .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
- { .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
- .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs),
- .gpiod_table = &wm8994_gpiod_table },
- { .id = 0x3e, .rev = 0, .name = "WM5102-6271-EV1-CS127 Amrut",
- .spi_devs = wm5102_reva_spi_devs,
- .num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs),
- .gpiod_table = &wm5102_reva_gpiod_table },
- { .id = 0x3e, .rev = -1, .name = "WM5102-6271-EV1-CS127 Amrut",
- .spi_devs = wm5102_spi_devs,
- .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs),
- .gpiod_table = &wm5102_gpiod_table },
- { .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1",
- .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
-};
-
-static int wlf_gf_module_probe(struct i2c_client *i2c)
-{
- int ret, i, j, id, rev;
-
- ret = i2c_smbus_read_byte_data(i2c, 0);
- if (ret < 0) {
- dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
- return ret;
- }
-
- id = (ret & 0xfe) >> 2;
- rev = ret & 0x3;
- for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
- if (id == gf_mods[i].id && (gf_mods[i].rev == 0xff ||
- rev == gf_mods[i].rev))
- break;
-
- gpiod_add_lookup_table(&wm5102_reva_gpiod_table);
- gpiod_add_lookup_table(&wm5102_gpiod_table);
- gpiod_add_lookup_table(&wm8994_gpiod_table);
-
- if (i < ARRAY_SIZE(gf_mods)) {
- dev_info(&i2c->dev, "%s revision %d\n",
- gf_mods[i].name, rev + 1);
-
- for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
- if (IS_ERR(i2c_new_client_device(i2c->adapter,
- &(gf_mods[i].i2c_devs[j]))))
- dev_err(&i2c->dev, "Failed to register\n");
- }
-
- spi_register_board_info(gf_mods[i].spi_devs,
- gf_mods[i].num_spi_devs);
-
- if (gf_mods[i].gpiod_table)
- gpiod_add_lookup_table(gf_mods[i].gpiod_table);
- } else {
- dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
- id, rev + 1);
- }
-
- return 0;
-}
-
-static const struct i2c_device_id wlf_gf_module_id[] = {
- { "wlf-gf-module", 0 },
- { }
-};
-
-static struct i2c_driver wlf_gf_module_driver = {
- .driver = {
- .name = "wlf-gf-module"
- },
- .probe_new = wlf_gf_module_probe,
- .id_table = wlf_gf_module_id,
-};
-
-static int __init wlf_gf_module_register(void)
-{
- if (!soc_is_s3c64xx())
- return 0;
-
- return i2c_add_driver(&wlf_gf_module_driver);
-}
-device_initcall(wlf_gf_module_register);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2011 Wolfson Microelectronics plc
-// Mark Brown <broonie@opensource.wolfsonmicro.com>
-//
-// Copyright 2011 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/leds.h>
-#include <linux/delay.h>
-#include <linux/mmc/host.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/dm9000.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio/driver.h>
-#include <linux/spi/spi.h>
-
-#include <linux/platform_data/pca953x.h>
-#include <linux/platform_data/s3c-hsotg.h>
-
-#include <video/platform_lcd.h>
-
-#include <linux/mfd/wm831x/core.h>
-#include <linux/mfd/wm831x/pdata.h>
-#include <linux/mfd/wm831x/irq.h>
-#include <linux/mfd/wm831x/gpio.h>
-
-#include <sound/wm1250-ev1.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/samsung_fimd.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <mach/irqs.h>
-
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/spi-s3c64xx.h>
-
-#include <plat/keypad.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <linux/soc/samsung/s3c-adc.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/pm.h>
-
-#include "common.h"
-#include "crag6410.h"
-#include "regs-gpio-memport.h"
-#include "regs-modem.h"
-#include "regs-sys.h"
-
-/* serial port setup */
-
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-static struct pwm_lookup crag6410_pwm_lookup[] = {
- PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 100000,
- PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data crag6410_backlight_data = {
- .max_brightness = 1000,
- .dft_brightness = 600,
-};
-
-static struct platform_device crag6410_backlight_device = {
- .name = "pwm-backlight",
- .id = -1,
- .dev = {
- .parent = &samsung_device_pwm.dev,
- .platform_data = &crag6410_backlight_data,
- },
-};
-
-static void crag6410_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
-{
- pr_debug("%s: setting power %d\n", __func__, power);
-
- if (power) {
- gpio_set_value(S3C64XX_GPB(0), 1);
- msleep(1);
- s3c_gpio_cfgpin(S3C64XX_GPF(14), S3C_GPIO_SFN(2));
- } else {
- gpio_direction_output(S3C64XX_GPF(14), 0);
- gpio_set_value(S3C64XX_GPB(0), 0);
- }
-}
-
-static struct platform_device crag6410_lcd_powerdev = {
- .name = "platform-lcd",
- .id = -1,
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &(struct plat_lcd_data) {
- .set_power = crag6410_lcd_power_set,
- },
-};
-
-/* 640x480 URT */
-static struct s3c_fb_pd_win crag6410_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 640,
- .yres = 480,
- .virtual_y = 480 * 2,
- .virtual_x = 640,
-};
-
-static struct fb_videomode crag6410_lcd_timing = {
- .left_margin = 150,
- .right_margin = 80,
- .upper_margin = 40,
- .lower_margin = 5,
- .hsync_len = 40,
- .vsync_len = 5,
- .xres = 640,
- .yres = 480,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata crag6410_lcd_pdata = {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .vtiming = &crag6410_lcd_timing,
- .win[0] = &crag6410_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-/* 2x6 keypad */
-
-static uint32_t crag6410_keymap[] = {
- /* KEY(row, col, keycode) */
- KEY(0, 0, KEY_VOLUMEUP),
- KEY(0, 1, KEY_HOME),
- KEY(0, 2, KEY_VOLUMEDOWN),
- KEY(0, 3, KEY_HELP),
- KEY(0, 4, KEY_MENU),
- KEY(0, 5, KEY_MEDIA),
- KEY(1, 0, 232),
- KEY(1, 1, KEY_DOWN),
- KEY(1, 2, KEY_LEFT),
- KEY(1, 3, KEY_UP),
- KEY(1, 4, KEY_RIGHT),
- KEY(1, 5, KEY_CAMERA),
-};
-
-static struct matrix_keymap_data crag6410_keymap_data = {
- .keymap = crag6410_keymap,
- .keymap_size = ARRAY_SIZE(crag6410_keymap),
-};
-
-static struct samsung_keypad_platdata crag6410_keypad_data = {
- .keymap_data = &crag6410_keymap_data,
- .rows = 2,
- .cols = 6,
-};
-
-static struct gpio_keys_button crag6410_gpio_keys[] = {
- [0] = {
- .code = KEY_SUSPEND,
- .gpio = S3C64XX_GPL(10), /* EINT 18 */
- .type = EV_KEY,
- .wakeup = 1,
- .active_low = 1,
- },
- [1] = {
- .code = SW_FRONT_PROXIMITY,
- .gpio = S3C64XX_GPN(11), /* EINT 11 */
- .type = EV_SW,
- },
-};
-
-static struct gpio_keys_platform_data crag6410_gpio_keydata = {
- .buttons = crag6410_gpio_keys,
- .nbuttons = ARRAY_SIZE(crag6410_gpio_keys),
-};
-
-static struct platform_device crag6410_gpio_keydev = {
- .name = "gpio-keys",
- .id = 0,
- .dev.platform_data = &crag6410_gpio_keydata,
-};
-
-static struct resource crag6410_dm9k_resource[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5, 2),
- [1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5 + (1 << 8), 2),
- [2] = DEFINE_RES_NAMED(S3C_EINT(17), 1, NULL, IORESOURCE_IRQ \
- | IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-static struct dm9000_plat_data mini6410_dm9k_pdata = {
- .flags = DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device crag6410_dm9k_device = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(crag6410_dm9k_resource),
- .resource = crag6410_dm9k_resource,
- .dev.platform_data = &mini6410_dm9k_pdata,
-};
-
-static struct resource crag6410_mmgpio_resource[] = {
- [0] = DEFINE_RES_MEM_NAMED(S3C64XX_PA_XM0CSN4, 1, "dat"),
-};
-
-static struct platform_device crag6410_mmgpio = {
- .name = "basic-mmio-gpio",
- .id = -1,
- .resource = crag6410_mmgpio_resource,
- .num_resources = ARRAY_SIZE(crag6410_mmgpio_resource),
- .dev.platform_data = &(struct bgpio_pdata) {
- .base = MMGPIO_GPIO_BASE,
- },
-};
-
-static struct platform_device speyside_device = {
- .name = "speyside",
- .id = -1,
-};
-
-static struct platform_device lowland_device = {
- .name = "lowland",
- .id = -1,
-};
-
-static struct platform_device tobermory_device = {
- .name = "tobermory",
- .id = -1,
-};
-
-static struct platform_device littlemill_device = {
- .name = "littlemill",
- .id = -1,
-};
-
-static struct platform_device bells_wm2200_device = {
- .name = "bells",
- .id = 0,
-};
-
-static struct platform_device bells_wm5102_device = {
- .name = "bells",
- .id = 1,
-};
-
-static struct platform_device bells_wm5110_device = {
- .name = "bells",
- .id = 2,
-};
-
-static struct regulator_consumer_supply wallvdd_consumers[] = {
- REGULATOR_SUPPLY("SPKVDD", "1-001a"),
- REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
- REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
- REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
- REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
-
- REGULATOR_SUPPLY("SPKVDDL", "spi0.1"),
- REGULATOR_SUPPLY("SPKVDDR", "spi0.1"),
-
- REGULATOR_SUPPLY("DC1VDD", "0-0034"),
- REGULATOR_SUPPLY("DC2VDD", "0-0034"),
- REGULATOR_SUPPLY("DC3VDD", "0-0034"),
- REGULATOR_SUPPLY("LDO1VDD", "0-0034"),
- REGULATOR_SUPPLY("LDO2VDD", "0-0034"),
- REGULATOR_SUPPLY("LDO4VDD", "0-0034"),
- REGULATOR_SUPPLY("LDO5VDD", "0-0034"),
- REGULATOR_SUPPLY("LDO6VDD", "0-0034"),
- REGULATOR_SUPPLY("LDO7VDD", "0-0034"),
- REGULATOR_SUPPLY("LDO8VDD", "0-0034"),
- REGULATOR_SUPPLY("LDO9VDD", "0-0034"),
- REGULATOR_SUPPLY("LDO10VDD", "0-0034"),
- REGULATOR_SUPPLY("LDO11VDD", "0-0034"),
-
- REGULATOR_SUPPLY("DC1VDD", "1-0034"),
- REGULATOR_SUPPLY("DC2VDD", "1-0034"),
- REGULATOR_SUPPLY("DC3VDD", "1-0034"),
- REGULATOR_SUPPLY("LDO1VDD", "1-0034"),
- REGULATOR_SUPPLY("LDO2VDD", "1-0034"),
- REGULATOR_SUPPLY("LDO4VDD", "1-0034"),
- REGULATOR_SUPPLY("LDO5VDD", "1-0034"),
- REGULATOR_SUPPLY("LDO6VDD", "1-0034"),
- REGULATOR_SUPPLY("LDO7VDD", "1-0034"),
- REGULATOR_SUPPLY("LDO8VDD", "1-0034"),
- REGULATOR_SUPPLY("LDO9VDD", "1-0034"),
- REGULATOR_SUPPLY("LDO10VDD", "1-0034"),
- REGULATOR_SUPPLY("LDO11VDD", "1-0034"),
-};
-
-static struct regulator_init_data wallvdd_data = {
- .constraints = {
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(wallvdd_consumers),
- .consumer_supplies = wallvdd_consumers,
-};
-
-static struct fixed_voltage_config wallvdd_pdata = {
- .supply_name = "WALLVDD",
- .microvolts = 5000000,
- .init_data = &wallvdd_data,
-};
-
-static struct platform_device wallvdd_device = {
- .name = "reg-fixed-voltage",
- .id = -1,
- .dev = {
- .platform_data = &wallvdd_pdata,
- },
-};
-
-static struct platform_device *crag6410_devices[] __initdata = {
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc2,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &s3c_device_fb,
- &s3c_device_ohci,
- &s3c_device_usb_hsotg,
- &samsung_device_pwm,
- &s3c64xx_device_iis0,
- &s3c64xx_device_iis1,
- &samsung_device_keypad,
- &crag6410_gpio_keydev,
- &crag6410_dm9k_device,
- &s3c64xx_device_spi0,
- &crag6410_mmgpio,
- &crag6410_lcd_powerdev,
- &crag6410_backlight_device,
- &speyside_device,
- &tobermory_device,
- &littlemill_device,
- &lowland_device,
- &bells_wm2200_device,
- &bells_wm5102_device,
- &bells_wm5110_device,
- &wallvdd_device,
-};
-
-static struct pca953x_platform_data crag6410_pca_data = {
- .gpio_base = PCA935X_GPIO_BASE,
- .irq_base = -1,
-};
-
-/* VDDARM is controlled by DVS1 connected to GPK(0) */
-static struct wm831x_buckv_pdata vddarm_pdata = {
- .dvs_control_src = 1,
-};
-
-static struct regulator_consumer_supply vddarm_consumers[] = {
- REGULATOR_SUPPLY("vddarm", NULL),
-};
-
-static struct regulator_init_data vddarm = {
- .constraints = {
- .name = "VDDARM",
- .min_uV = 1000000,
- .max_uV = 1300000,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
- .consumer_supplies = vddarm_consumers,
- .supply_regulator = "WALLVDD",
- .driver_data = &vddarm_pdata,
-};
-
-static struct regulator_consumer_supply vddint_consumers[] = {
- REGULATOR_SUPPLY("vddint", NULL),
-};
-
-static struct regulator_init_data vddint = {
- .constraints = {
- .name = "VDDINT",
- .min_uV = 1000000,
- .max_uV = 1200000,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(vddint_consumers),
- .consumer_supplies = vddint_consumers,
- .supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddmem = {
- .constraints = {
- .name = "VDDMEM",
- .always_on = 1,
- },
-};
-
-static struct regulator_init_data vddsys = {
- .constraints = {
- .name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
- .always_on = 1,
- },
-};
-
-static struct regulator_consumer_supply vddmmc_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
- REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
- REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
-};
-
-static struct regulator_init_data vddmmc = {
- .constraints = {
- .name = "VDDMMC,UH",
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(vddmmc_consumers),
- .consumer_supplies = vddmmc_consumers,
- .supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddotgi = {
- .constraints = {
- .name = "VDDOTGi",
- .always_on = 1,
- },
- .supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddotg = {
- .constraints = {
- .name = "VDDOTG",
- .always_on = 1,
- },
- .supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddhi = {
- .constraints = {
- .name = "VDDHI",
- .always_on = 1,
- },
- .supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddadc = {
- .constraints = {
- .name = "VDDADC,VDDDAC",
- .always_on = 1,
- },
- .supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddmem0 = {
- .constraints = {
- .name = "VDDMEM0",
- .always_on = 1,
- },
- .supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddpll = {
- .constraints = {
- .name = "VDDPLL",
- .always_on = 1,
- },
- .supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddlcd = {
- .constraints = {
- .name = "VDDLCD",
- .always_on = 1,
- },
- .supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddalive = {
- .constraints = {
- .name = "VDDALIVE",
- .always_on = 1,
- },
- .supply_regulator = "WALLVDD",
-};
-
-static struct wm831x_backup_pdata banff_backup_pdata = {
- .charger_enable = 1,
- .vlim = 2500, /* mV */
- .ilim = 200, /* uA */
-};
-
-static struct wm831x_status_pdata banff_red_led = {
- .name = "banff:red:",
- .default_src = WM831X_STATUS_MANUAL,
-};
-
-static struct wm831x_status_pdata banff_green_led = {
- .name = "banff:green:",
- .default_src = WM831X_STATUS_MANUAL,
-};
-
-static struct wm831x_touch_pdata touch_pdata = {
- .data_irq = S3C_EINT(26),
- .pd_irq = S3C_EINT(27),
-};
-
-static struct wm831x_pdata crag_pmic_pdata = {
- .wm831x_num = 1,
- .irq_base = BANFF_PMIC_IRQ_BASE,
- .gpio_base = BANFF_PMIC_GPIO_BASE,
- .soft_shutdown = true,
-
- .backup = &banff_backup_pdata,
-
- .gpio_defaults = {
- /* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
- [4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
- /* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
- [10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
- /* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
- [11] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x7,
- },
-
- .dcdc = {
- &vddarm, /* DCDC1 */
- &vddint, /* DCDC2 */
- &vddmem, /* DCDC3 */
- },
-
- .ldo = {
- &vddsys, /* LDO1 */
- &vddmmc, /* LDO2 */
- NULL, /* LDO3 */
- &vddotgi, /* LDO4 */
- &vddotg, /* LDO5 */
- &vddhi, /* LDO6 */
- &vddadc, /* LDO7 */
- &vddmem0, /* LDO8 */
- &vddpll, /* LDO9 */
- &vddlcd, /* LDO10 */
- &vddalive, /* LDO11 */
- },
-
- .status = {
- &banff_green_led,
- &banff_red_led,
- },
-
- .touch = &touch_pdata,
-};
-
-/*
- * VDDARM is eventually ending up as a regulator hanging on the MFD cell device
- * "wm831x-buckv.1" spawn from drivers/mfd/wm831x-core.c.
- *
- * From the note on the platform data we can see that this is clearly DVS1
- * and assigned as dcdc1 resource to the MFD core which sets .id of the cell
- * spawning the DVS1 platform device to 1, then the cell platform device
- * name is calculated from 10*instance + id resulting in the device name
- * "wm831x-buckv.11"
- */
-static struct gpiod_lookup_table crag_pmic_gpiod_table = {
- .dev_id = "wm831x-buckv.11",
- .table = {
- GPIO_LOOKUP("GPIOK", 0, "dvs", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct i2c_board_info i2c_devs0[] = {
- { I2C_BOARD_INFO("24c08", 0x50), },
- { I2C_BOARD_INFO("tca6408", 0x20),
- .platform_data = &crag6410_pca_data,
- },
- { I2C_BOARD_INFO("wm8312", 0x34),
- .platform_data = &crag_pmic_pdata,
- .irq = S3C_EINT(23),
- },
-};
-
-static struct s3c2410_platform_i2c i2c0_pdata = {
- .frequency = 400000,
-};
-
-static struct regulator_consumer_supply pvdd_1v2_consumers[] = {
- REGULATOR_SUPPLY("DCVDD", "spi0.0"),
- REGULATOR_SUPPLY("AVDD", "spi0.0"),
- REGULATOR_SUPPLY("AVDD", "spi0.1"),
-};
-
-static struct regulator_init_data pvdd_1v2 = {
- .constraints = {
- .name = "PVDD_1V2",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
-
- .consumer_supplies = pvdd_1v2_consumers,
- .num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers),
-};
-
-static struct regulator_consumer_supply pvdd_1v8_consumers[] = {
- REGULATOR_SUPPLY("LDOVDD", "1-001a"),
- REGULATOR_SUPPLY("PLLVDD", "1-001a"),
- REGULATOR_SUPPLY("DBVDD", "1-001a"),
- REGULATOR_SUPPLY("DBVDD1", "1-001a"),
- REGULATOR_SUPPLY("DBVDD2", "1-001a"),
- REGULATOR_SUPPLY("DBVDD3", "1-001a"),
- REGULATOR_SUPPLY("CPVDD", "1-001a"),
- REGULATOR_SUPPLY("AVDD2", "1-001a"),
- REGULATOR_SUPPLY("DCVDD", "1-001a"),
- REGULATOR_SUPPLY("AVDD", "1-001a"),
- REGULATOR_SUPPLY("DBVDD", "spi0.0"),
-
- REGULATOR_SUPPLY("DBVDD", "1-003a"),
- REGULATOR_SUPPLY("LDOVDD", "1-003a"),
- REGULATOR_SUPPLY("CPVDD", "1-003a"),
- REGULATOR_SUPPLY("AVDD", "1-003a"),
- REGULATOR_SUPPLY("DBVDD1", "spi0.1"),
- REGULATOR_SUPPLY("DBVDD2", "spi0.1"),
- REGULATOR_SUPPLY("DBVDD3", "spi0.1"),
- REGULATOR_SUPPLY("LDOVDD", "spi0.1"),
- REGULATOR_SUPPLY("CPVDD", "spi0.1"),
-};
-
-static struct regulator_init_data pvdd_1v8 = {
- .constraints = {
- .name = "PVDD_1V8",
- .always_on = 1,
- },
-
- .consumer_supplies = pvdd_1v8_consumers,
- .num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
-};
-
-static struct regulator_consumer_supply pvdd_3v3_consumers[] = {
- REGULATOR_SUPPLY("MICVDD", "1-001a"),
- REGULATOR_SUPPLY("AVDD1", "1-001a"),
-};
-
-static struct regulator_init_data pvdd_3v3 = {
- .constraints = {
- .name = "PVDD_3V3",
- .always_on = 1,
- },
-
- .consumer_supplies = pvdd_3v3_consumers,
- .num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
-};
-
-static struct wm831x_pdata glenfarclas_pmic_pdata = {
- .wm831x_num = 2,
- .irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
- .gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
- .soft_shutdown = true,
-
- .gpio_defaults = {
- /* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */
- [0] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
- [1] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
- [2] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
- },
-
- .dcdc = {
- &pvdd_1v2, /* DCDC1 */
- &pvdd_1v8, /* DCDC2 */
- &pvdd_3v3, /* DCDC3 */
- },
-
- .disable_touch = true,
-};
-
-static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
- .gpios = {
- [WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12),
- [WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12),
- [WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13),
- [WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14),
- [WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8),
- },
-};
-
-static struct i2c_board_info i2c_devs1[] = {
- { I2C_BOARD_INFO("wm8311", 0x34),
- .irq = S3C_EINT(0),
- .platform_data = &glenfarclas_pmic_pdata },
-
- { I2C_BOARD_INFO("wlf-gf-module", 0x20) },
- { I2C_BOARD_INFO("wlf-gf-module", 0x22) },
- { I2C_BOARD_INFO("wlf-gf-module", 0x24) },
- { I2C_BOARD_INFO("wlf-gf-module", 0x25) },
- { I2C_BOARD_INFO("wlf-gf-module", 0x26) },
-
- { I2C_BOARD_INFO("wm1250-ev1", 0x27),
- .platform_data = &wm1250_ev1_pdata },
-};
-
-static struct s3c2410_platform_i2c i2c1_pdata = {
- .frequency = 400000,
- .bus_num = 1,
-};
-
-static void __init crag6410_map_io(void)
-{
- s3c64xx_init_io(NULL, 0);
- s3c64xx_set_xtal_freq(12000000);
- s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-
- /* LCD type and Bypass set by bootloader */
-}
-
-static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = {
- .max_width = 4,
- .cd_type = S3C_SDHCI_CD_PERMANENT,
- .host_caps = MMC_CAP_POWER_OFF_CARD,
-};
-
-static void crag6410_cfg_sdhci0(struct platform_device *dev, int width)
-{
- /* Set all the necessary GPG pins to special-function 2 */
- s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
-
- /* force card-detected for prototype 0 */
- s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_DOWN);
-}
-
-static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
- .max_width = 4,
- .cd_type = S3C_SDHCI_CD_INTERNAL,
- .cfg_gpio = crag6410_cfg_sdhci0,
- .host_caps = MMC_CAP_POWER_OFF_CARD,
-};
-
-static const struct gpio_led gpio_leds[] = {
- {
- .name = "d13:green:",
- .gpio = MMGPIO_GPIO_BASE + 0,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "d14:green:",
- .gpio = MMGPIO_GPIO_BASE + 1,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "d15:green:",
- .gpio = MMGPIO_GPIO_BASE + 2,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "d16:green:",
- .gpio = MMGPIO_GPIO_BASE + 3,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "d17:green:",
- .gpio = MMGPIO_GPIO_BASE + 4,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "d18:green:",
- .gpio = MMGPIO_GPIO_BASE + 5,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "d19:green:",
- .gpio = MMGPIO_GPIO_BASE + 6,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "d20:green:",
- .gpio = MMGPIO_GPIO_BASE + 7,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
-};
-
-static const struct gpio_led_platform_data gpio_leds_pdata = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct dwc2_hsotg_plat crag6410_hsotg_pdata;
-
-static void __init crag6410_machine_init(void)
-{
- /* Open drain IRQs need pullups */
- s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);
-
- gpio_request(S3C64XX_GPB(0), "LCD power");
- gpio_direction_output(S3C64XX_GPB(0), 0);
-
- gpio_request(S3C64XX_GPF(14), "LCD PWM");
- gpio_direction_output(S3C64XX_GPF(14), 0); /* turn off */
-
- gpio_request(S3C64XX_GPB(1), "SD power");
- gpio_direction_output(S3C64XX_GPB(1), 0);
-
- gpio_request(S3C64XX_GPF(10), "nRESETSEL");
- gpio_direction_output(S3C64XX_GPF(10), 1);
-
- s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
- s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);
-
- s3c_i2c0_set_platdata(&i2c0_pdata);
- s3c_i2c1_set_platdata(&i2c1_pdata);
- s3c_fb_set_platdata(&crag6410_lcd_pdata);
- dwc2_hsotg_set_platdata(&crag6410_hsotg_pdata);
-
- gpiod_add_lookup_table(&crag_pmic_gpiod_table);
- i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- samsung_keypad_set_platdata(&crag6410_keypad_data);
- s3c64xx_spi0_set_platdata(NULL, 0, 2);
-
- pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
- platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
-
- gpio_led_register_device(-1, &gpio_leds_pdata);
-
- regulator_has_full_constraints();
-
- s3c64xx_pm_init();
-}
-
-MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
- /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
- .atag_offset = 0x100,
- .nr_irqs = S3C64XX_NR_IRQS,
- .init_irq = s3c6410_init_irq,
- .map_io = crag6410_map_io,
- .init_machine = crag6410_machine_init,
- .init_time = samsung_timer_init,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// mach-hmt.c - Platform code for Airgoo HMT
-//
-// Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <video/samsung_fimd.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
-#include <plat/fb.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-static struct pwm_lookup hmt_pwm_lookup[] = {
- PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
- 1000000000 / (100 * 256 * 20), PWM_POLARITY_NORMAL),
-};
-
-static int hmt_bl_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
- if (!ret)
- ret = gpio_direction_output(S3C64XX_GPB(4), 0);
-
- return ret;
-}
-
-static int hmt_bl_notify(struct device *dev, int brightness)
-{
- /*
- * translate from CIELUV/CIELAB L*->brightness, E.G. from
- * perceived luminance to light output. Assumes range 0..25600
- */
- if (brightness < 0x800) {
- /* Y = Yn * L / 903.3 */
- brightness = (100*256 * brightness + 231245/2) / 231245;
- } else {
- /* Y = Yn * ((L + 16) / 116 )^3 */
- int t = (brightness*4 + 16*1024 + 58)/116;
- brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
- }
-
- gpio_set_value(S3C64XX_GPB(4), brightness);
-
- return brightness;
-}
-
-static void hmt_bl_exit(struct device *dev)
-{
- gpio_free(S3C64XX_GPB(4));
-}
-
-static struct platform_pwm_backlight_data hmt_backlight_data = {
- .max_brightness = 100 * 256,
- .dft_brightness = 40 * 256,
- .init = hmt_bl_init,
- .notify = hmt_bl_notify,
- .exit = hmt_bl_exit,
-
-};
-
-static struct platform_device hmt_backlight_device = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &samsung_device_pwm.dev,
- .platform_data = &hmt_backlight_data,
- },
-};
-
-static struct s3c_fb_pd_win hmt_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode hmt_lcd_timing = {
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .vtiming = &hmt_lcd_timing,
- .win[0] = &hmt_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static struct mtd_partition hmt_nand_part[] = {
- [0] = {
- .name = "uboot",
- .size = SZ_512K,
- .offset = 0,
- },
- [1] = {
- .name = "uboot-env1",
- .size = SZ_256K,
- .offset = SZ_512K,
- },
- [2] = {
- .name = "uboot-env2",
- .size = SZ_256K,
- .offset = SZ_512K + SZ_256K,
- },
- [3] = {
- .name = "kernel",
- .size = SZ_2M,
- .offset = SZ_1M,
- },
- [4] = {
- .name = "rootfs",
- .size = MTDPART_SIZ_FULL,
- .offset = SZ_1M + SZ_2M,
- },
-};
-
-static struct s3c2410_nand_set hmt_nand_sets[] = {
- [0] = {
- .name = "nand",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(hmt_nand_part),
- .partitions = hmt_nand_part,
- },
-};
-
-static struct s3c2410_platform_nand hmt_nand_info = {
- .tacls = 25,
- .twrph0 = 55,
- .twrph1 = 40,
- .nr_sets = ARRAY_SIZE(hmt_nand_sets),
- .sets = hmt_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-static struct gpio_led hmt_leds[] = {
- { /* left function keys */
- .name = "left:blue",
- .gpio = S3C64XX_GPO(12),
- .default_trigger = "default-on",
- },
- { /* right function keys - red */
- .name = "right:red",
- .gpio = S3C64XX_GPO(13),
- },
- { /* right function keys - green */
- .name = "right:green",
- .gpio = S3C64XX_GPO(14),
- },
- { /* right function keys - blue */
- .name = "right:blue",
- .gpio = S3C64XX_GPO(15),
- .default_trigger = "default-on",
- },
-};
-
-static struct gpio_led_platform_data hmt_led_data = {
- .num_leds = ARRAY_SIZE(hmt_leds),
- .leds = hmt_leds,
-};
-
-static struct platform_device hmt_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev.platform_data = &hmt_led_data,
-};
-
-static struct map_desc hmt_iodesc[] = {};
-
-static struct platform_device *hmt_devices[] __initdata = {
- &s3c_device_i2c0,
- &s3c_device_nand,
- &s3c_device_fb,
- &s3c_device_ohci,
- &samsung_device_pwm,
- &hmt_backlight_device,
- &hmt_leds_device,
-};
-
-static void __init hmt_map_io(void)
-{
- s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
- s3c64xx_set_xtal_freq(12000000);
- s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init hmt_machine_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- s3c_fb_set_platdata(&hmt_lcd_pdata);
- s3c_nand_set_platdata(&hmt_nand_info);
-
- gpio_request(S3C64XX_GPC(7), "usb power");
- gpio_direction_output(S3C64XX_GPC(7), 0);
- gpio_request(S3C64XX_GPM(0), "usb power");
- gpio_direction_output(S3C64XX_GPM(0), 1);
- gpio_request(S3C64XX_GPK(7), "usb power");
- gpio_direction_output(S3C64XX_GPK(7), 1);
- gpio_request(S3C64XX_GPF(13), "usb power");
- gpio_direction_output(S3C64XX_GPF(13), 1);
-
- pwm_add_table(hmt_pwm_lookup, ARRAY_SIZE(hmt_pwm_lookup));
- platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
-}
-
-MACHINE_START(HMT, "Airgoo-HMT")
- /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
- .atag_offset = 0x100,
- .nr_irqs = S3C64XX_NR_IRQS,
- .init_irq = s3c6410_init_irq,
- .map_io = hmt_map_io,
- .init_machine = hmt_machine_init,
- .init_time = samsung_timer_init,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/dm9000.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/types.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <linux/soc/samsung/s3c-adc.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/mmc-sdhci-s3c.h>
-#include <plat/sdhci.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <mach/irqs.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include "common.h"
-#include "regs-modem.h"
-#include "regs-srom.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource mini6410_dm9k_resource[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
- [1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
- [2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
- | IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-static struct dm9000_plat_data mini6410_dm9k_pdata = {
- .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device mini6410_device_eth = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(mini6410_dm9k_resource),
- .resource = mini6410_dm9k_resource,
- .dev = {
- .platform_data = &mini6410_dm9k_pdata,
- },
-};
-
-static struct mtd_partition mini6410_nand_part[] = {
- [0] = {
- .name = "uboot",
- .size = SZ_1M,
- .offset = 0,
- },
- [1] = {
- .name = "kernel",
- .size = SZ_2M,
- .offset = SZ_1M,
- },
- [2] = {
- .name = "rootfs",
- .size = MTDPART_SIZ_FULL,
- .offset = SZ_1M + SZ_2M,
- },
-};
-
-static struct s3c2410_nand_set mini6410_nand_sets[] = {
- [0] = {
- .name = "nand",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(mini6410_nand_part),
- .partitions = mini6410_nand_part,
- },
-};
-
-static struct s3c2410_platform_nand mini6410_nand_info = {
- .tacls = 25,
- .twrph0 = 55,
- .twrph1 = 40,
- .nr_sets = ARRAY_SIZE(mini6410_nand_sets),
- .sets = mini6410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 480,
- .yres = 272,
-};
-
-static struct fb_videomode mini6410_lcd_type0_timing = {
- /* 4.3" 480x272 */
- .left_margin = 3,
- .right_margin = 2,
- .upper_margin = 1,
- .lower_margin = 1,
- .hsync_len = 40,
- .vsync_len = 1,
- .xres = 480,
- .yres = 272,
-};
-
-static struct s3c_fb_pd_win mini6410_lcd_type1_fb_win = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode mini6410_lcd_type1_timing = {
- /* 7.0" 800x480 */
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
-};
-
-static struct s3c_fb_platdata mini6410_lcd_pdata[] __initdata = {
- {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .vtiming = &mini6410_lcd_type0_timing,
- .win[0] = &mini6410_lcd_type0_fb_win,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- }, {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .vtiming = &mini6410_lcd_type1_timing,
- .win[0] = &mini6410_lcd_type1_fb_win,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- },
- { },
-};
-
-static void mini6410_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power)
- gpio_direction_output(S3C64XX_GPE(0), 1);
- else
- gpio_direction_output(S3C64XX_GPE(0), 0);
-}
-
-static struct plat_lcd_data mini6410_lcd_power_data = {
- .set_power = mini6410_lcd_power_set,
-};
-
-static struct platform_device mini6410_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &mini6410_lcd_power_data,
-};
-
-static struct s3c_sdhci_platdata mini6410_hsmmc1_pdata = {
- .max_width = 4,
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = S3C64XX_GPN(10),
- .ext_cd_gpio_invert = true,
-};
-
-static struct platform_device *mini6410_devices[] __initdata = {
- &mini6410_device_eth,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_ohci,
- &s3c_device_nand,
- &s3c_device_fb,
- &mini6410_lcd_powerdev,
- &s3c_device_adc,
-};
-
-static void __init mini6410_map_io(void)
-{
- u32 tmp;
-
- s3c64xx_init_io(NULL, 0);
- s3c64xx_set_xtal_freq(12000000);
- s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-
- /* set the LCD type */
- tmp = __raw_readl(S3C64XX_SPCON);
- tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
- tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
- __raw_writel(tmp, S3C64XX_SPCON);
-
- /* remove the LCD bypass */
- tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
- tmp &= ~MIFPCON_LCD_BYPASS;
- __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/*
- * mini6410_features string
- *
- * 0-9 LCD configuration
- *
- */
-static char mini6410_features_str[12] __initdata = "0";
-
-static int __init mini6410_features_setup(char *str)
-{
- if (str)
- strlcpy(mini6410_features_str, str,
- sizeof(mini6410_features_str));
- return 1;
-}
-
-__setup("mini6410=", mini6410_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-
-struct mini6410_features_t {
- int done;
- int lcd_index;
-};
-
-static void mini6410_parse_features(
- struct mini6410_features_t *features,
- const char *features_str)
-{
- const char *fp = features_str;
-
- features->done = 0;
- features->lcd_index = 0;
-
- while (*fp) {
- char f = *fp++;
-
- switch (f) {
- case '0'...'9': /* tft screen */
- if (features->done & FEATURE_SCREEN) {
- printk(KERN_INFO "MINI6410: '%c' ignored, "
- "screen type already set\n", f);
- } else {
- int li = f - '0';
- if (li >= ARRAY_SIZE(mini6410_lcd_pdata))
- printk(KERN_INFO "MINI6410: '%c' out "
- "of range LCD mode\n", f);
- else {
- features->lcd_index = li;
- }
- }
- features->done |= FEATURE_SCREEN;
- break;
- }
- }
-}
-
-static void __init mini6410_machine_init(void)
-{
- u32 cs1;
- struct mini6410_features_t features = { 0 };
-
- printk(KERN_INFO "MINI6410: Option string mini6410=%s\n",
- mini6410_features_str);
-
- /* Parse the feature string */
- mini6410_parse_features(&features, mini6410_features_str);
-
- printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n",
- mini6410_lcd_pdata[features.lcd_index].win[0]->xres,
- mini6410_lcd_pdata[features.lcd_index].win[0]->yres);
-
- s3c_nand_set_platdata(&mini6410_nand_info);
- s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
- s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
- s3c64xx_ts_set_platdata(NULL);
-
- /* configure nCS1 width to 16 bits */
-
- cs1 = __raw_readl(S3C64XX_SROM_BW) &
- ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
- (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
- S3C64XX_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S3C64XX_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
-
- __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
- (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
- (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
- (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
- (13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
- (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
- (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
- gpio_request(S3C64XX_GPF(15), "LCD power");
- gpio_request(S3C64XX_GPE(0), "LCD power");
-
- platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
-}
-
-MACHINE_START(MINI6410, "MINI6410")
- /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
- .atag_offset = 0x100,
- .nr_irqs = S3C64XX_NR_IRQS,
- .init_irq = s3c6410_init_irq,
- .map_io = mini6410_map_io,
- .init_machine = mini6410_machine_init,
- .init_time = samsung_timer_init,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2008-2009 Samsung Electronics
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/fb.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
- /* REVISIT: NCP uses only serial 1, 2 */
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-static struct platform_device *ncp_devices[] __initdata = {
- &s3c_device_hsmmc1,
- &s3c_device_i2c0,
-};
-
-static struct map_desc ncp_iodesc[] __initdata = {};
-
-static void __init ncp_map_io(void)
-{
- s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
- s3c64xx_set_xtal_freq(12000000);
- s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init ncp_machine_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
-
- platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
-}
-
-MACHINE_START(NCP, "NCP")
- /* Maintainer: Samsung Electronics */
- .atag_offset = 0x100,
- .nr_irqs = S3C64XX_NR_IRQS,
- .init_irq = s3c6410_init_irq,
- .map_io = ncp_map_io,
- .init_machine = ncp_machine_init,
- .init_time = samsung_timer_init,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/dm9000.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/types.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <mach/irqs.h>
-
-#include <linux/soc/samsung/s3c-adc.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include "common.h"
-#include "regs-modem.h"
-#include "regs-srom.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource real6410_dm9k_resource[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
- [1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
- [2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
- | IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-static struct dm9000_plat_data real6410_dm9k_pdata = {
- .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device real6410_device_eth = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(real6410_dm9k_resource),
- .resource = real6410_dm9k_resource,
- .dev = {
- .platform_data = &real6410_dm9k_pdata,
- },
-};
-
-static struct s3c_fb_pd_win real6410_lcd_type0_fb_win = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 480,
- .yres = 272,
-};
-
-static struct fb_videomode real6410_lcd_type0_timing = {
- /* 4.3" 480x272 */
- .left_margin = 3,
- .right_margin = 2,
- .upper_margin = 1,
- .lower_margin = 1,
- .hsync_len = 40,
- .vsync_len = 1,
-};
-
-static struct s3c_fb_pd_win real6410_lcd_type1_fb_win = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode real6410_lcd_type1_timing = {
- /* 7.0" 800x480 */
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
-};
-
-static struct s3c_fb_platdata real6410_lcd_pdata[] __initdata = {
- {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .vtiming = &real6410_lcd_type0_timing,
- .win[0] = &real6410_lcd_type0_fb_win,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- }, {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .vtiming = &real6410_lcd_type1_timing,
- .win[0] = &real6410_lcd_type1_fb_win,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- },
- { },
-};
-
-static struct mtd_partition real6410_nand_part[] = {
- [0] = {
- .name = "uboot",
- .size = SZ_1M,
- .offset = 0,
- },
- [1] = {
- .name = "kernel",
- .size = SZ_2M,
- .offset = SZ_1M,
- },
- [2] = {
- .name = "rootfs",
- .size = MTDPART_SIZ_FULL,
- .offset = SZ_1M + SZ_2M,
- },
-};
-
-static struct s3c2410_nand_set real6410_nand_sets[] = {
- [0] = {
- .name = "nand",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(real6410_nand_part),
- .partitions = real6410_nand_part,
- },
-};
-
-static struct s3c2410_platform_nand real6410_nand_info = {
- .tacls = 25,
- .twrph0 = 55,
- .twrph1 = 40,
- .nr_sets = ARRAY_SIZE(real6410_nand_sets),
- .sets = real6410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-static struct platform_device *real6410_devices[] __initdata = {
- &real6410_device_eth,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_fb,
- &s3c_device_nand,
- &s3c_device_adc,
- &s3c_device_ohci,
-};
-
-static void __init real6410_map_io(void)
-{
- u32 tmp;
-
- s3c64xx_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-
- /* set the LCD type */
- tmp = __raw_readl(S3C64XX_SPCON);
- tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
- tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
- __raw_writel(tmp, S3C64XX_SPCON);
-
- /* remove the LCD bypass */
- tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
- tmp &= ~MIFPCON_LCD_BYPASS;
- __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/*
- * real6410_features string
- *
- * 0-9 LCD configuration
- *
- */
-static char real6410_features_str[12] __initdata = "0";
-
-static int __init real6410_features_setup(char *str)
-{
- if (str)
- strlcpy(real6410_features_str, str,
- sizeof(real6410_features_str));
- return 1;
-}
-
-__setup("real6410=", real6410_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-
-struct real6410_features_t {
- int done;
- int lcd_index;
-};
-
-static void real6410_parse_features(
- struct real6410_features_t *features,
- const char *features_str)
-{
- const char *fp = features_str;
-
- features->done = 0;
- features->lcd_index = 0;
-
- while (*fp) {
- char f = *fp++;
-
- switch (f) {
- case '0'...'9': /* tft screen */
- if (features->done & FEATURE_SCREEN) {
- printk(KERN_INFO "REAL6410: '%c' ignored, "
- "screen type already set\n", f);
- } else {
- int li = f - '0';
- if (li >= ARRAY_SIZE(real6410_lcd_pdata))
- printk(KERN_INFO "REAL6410: '%c' out "
- "of range LCD mode\n", f);
- else {
- features->lcd_index = li;
- }
- }
- features->done |= FEATURE_SCREEN;
- break;
- }
- }
-}
-
-static void __init real6410_machine_init(void)
-{
- u32 cs1;
- struct real6410_features_t features = { 0 };
-
- printk(KERN_INFO "REAL6410: Option string real6410=%s\n",
- real6410_features_str);
-
- /* Parse the feature string */
- real6410_parse_features(&features, real6410_features_str);
-
- printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
- real6410_lcd_pdata[features.lcd_index].win[0]->xres,
- real6410_lcd_pdata[features.lcd_index].win[0]->yres);
-
- s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
- s3c_nand_set_platdata(&real6410_nand_info);
- s3c64xx_ts_set_platdata(NULL);
-
- /* configure nCS1 width to 16 bits */
-
- cs1 = __raw_readl(S3C64XX_SROM_BW) &
- ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
- (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
- S3C64XX_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S3C64XX_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
-
- __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
- (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
- (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
- (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
- (13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
- (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
- (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
- gpio_request(S3C64XX_GPF(15), "LCD power");
-
- platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
-}
-
-MACHINE_START(REAL6410, "REAL6410")
- /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
- .atag_offset = 0x100,
- .nr_irqs = S3C64XX_NR_IRQS,
- .init_irq = s3c6410_init_irq,
- .map_io = real6410_map_io,
- .init_machine = real6410_machine_init,
- .init_time = samsung_timer_init,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Samsung's S3C64XX flattened device tree enabled machine
-//
-// Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-
-#include <plat/cpu.h>
-#include <mach/map.h>
-
-#include "common.h"
-
-/*
- * IO mapping for shared system controller IP.
- *
- * FIXME: Make remaining drivers use dynamic mapping.
- */
-static struct map_desc s3c64xx_dt_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static void __init s3c64xx_dt_map_io(void)
-{
- debug_ll_io_init();
- iotable_init(s3c64xx_dt_iodesc, ARRAY_SIZE(s3c64xx_dt_iodesc));
-
- s3c64xx_init_cpu();
-
- if (!soc_is_s3c64xx())
- panic("SoC is not S3C64xx!");
-}
-
-static const char *const s3c64xx_dt_compat[] __initconst = {
- "samsung,s3c6400",
- "samsung,s3c6410",
- NULL
-};
-
-DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
- /* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
- .dt_compat = s3c64xx_dt_compat,
- .map_io = s3c64xx_dt_map_io,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2010 Maurus Cuelenaere
-
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/platform_data/s3c-hsotg.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/hwmon-s3c.h>
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <plat/sdhci.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include <video/platform_lcd.h>
-
-#include "common.h"
-#include "mach-smartq.h"
-#include "regs-modem.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg smartq_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-static void smartq_usb_host_powercontrol(int port, int to)
-{
- pr_debug("%s(%d, %d)\n", __func__, port, to);
-
- if (port == 0) {
- gpio_set_value(S3C64XX_GPL(0), to);
- gpio_set_value(S3C64XX_GPL(1), to);
- }
-}
-
-static irqreturn_t smartq_usb_host_ocirq(int irq, void *pw)
-{
- struct s3c2410_hcd_info *info = pw;
-
- if (gpio_get_value(S3C64XX_GPL(10)) == 0) {
- pr_debug("%s: over-current irq (oc detected)\n", __func__);
- s3c2410_usb_report_oc(info, 3);
- } else {
- pr_debug("%s: over-current irq (oc cleared)\n", __func__);
- s3c2410_usb_report_oc(info, 0);
- }
-
- return IRQ_HANDLED;
-}
-
-static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)
-{
- int ret;
-
- /* This isn't present on a SmartQ 5 board */
- if (machine_is_smartq5())
- return;
-
- if (on) {
- ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)),
- smartq_usb_host_ocirq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "USB host overcurrent", info);
- if (ret != 0)
- pr_err("failed to request usb oc irq: %d\n", ret);
- } else {
- free_irq(gpio_to_irq(S3C64XX_GPL(10)), info);
- }
-}
-
-static struct s3c2410_hcd_info smartq_usb_host_info = {
- .port[0] = {
- .flags = S3C_HCDFLG_USED
- },
- .port[1] = {
- .flags = 0
- },
-
- .power_control = smartq_usb_host_powercontrol,
- .enable_oc = smartq_usb_host_enableoc,
-};
-
-static struct gpiod_lookup_table smartq_usb_otg_vbus_gpiod_table = {
- .dev_id = "gpio-vbus",
- .table = {
- GPIO_LOOKUP("GPL", 9, "vbus", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct platform_device smartq_usb_otg_vbus_dev = {
- .name = "gpio-vbus",
-};
-
-static struct pwm_lookup smartq_pwm_lookup[] = {
- PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
- 1000000000 / (1000 * 20), PWM_POLARITY_NORMAL),
-};
-
-static int smartq_bl_init(struct device *dev)
-{
- s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
-
- return 0;
-}
-
-static struct platform_pwm_backlight_data smartq_backlight_data = {
- .max_brightness = 1000,
- .dft_brightness = 600,
- .init = smartq_bl_init,
-};
-
-static struct platform_device smartq_backlight_device = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &samsung_device_pwm.dev,
- .platform_data = &smartq_backlight_data,
- },
-};
-
-static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = {
- .delay = 65535,
- .presc = 99,
- .oversampling_shift = 4,
-};
-
-static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
- .max_width = 4,
- .cd_type = S3C_SDHCI_CD_PERMANENT,
-};
-
-static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
- /* Battery voltage (?-4.2V) */
- .in[0] = &(struct s3c_hwmon_chcfg) {
- .name = "smartq:battery-voltage",
- .mult = 3300,
- .div = 2048,
- },
- /* Reference voltage (1.2V) */
- .in[1] = &(struct s3c_hwmon_chcfg) {
- .name = "smartq:reference-voltage",
- .mult = 3300,
- .div = 4096,
- },
-};
-
-static struct dwc2_hsotg_plat smartq_hsotg_pdata;
-
-static int __init smartq_lcd_setup_gpio(void)
-{
- int ret;
-
- ret = gpio_request(S3C64XX_GPM(3), "LCD power");
- if (ret < 0)
- return ret;
-
- /* turn power off */
- gpio_direction_output(S3C64XX_GPM(3), 0);
-
- return 0;
-}
-
-/* GPM0 -> CS */
-static struct spi_gpio_platform_data smartq_lcd_control = {
- .num_chipselect = 1,
-};
-
-static struct platform_device smartq_lcd_control_device = {
- .name = "spi_gpio",
- .id = 1,
- .dev.platform_data = &smartq_lcd_control,
-};
-
-static struct gpiod_lookup_table smartq_lcd_control_gpiod_table = {
- .dev_id = "spi_gpio",
- .table = {
- GPIO_LOOKUP("GPIOM", 1,
- "sck", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPIOM", 2,
- "mosi", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPIOM", 3,
- "miso", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("GPIOM", 0,
- "cs", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
-{
- gpio_direction_output(S3C64XX_GPM(3), power);
-}
-
-static struct plat_lcd_data smartq_lcd_power_data = {
- .set_power = smartq_lcd_power_set,
-};
-
-static struct platform_device smartq_lcd_power_device = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &smartq_lcd_power_data,
-};
-
-static struct i2c_board_info smartq_i2c_devs[] __initdata = {
- { I2C_BOARD_INFO("wm8987", 0x1a), },
-};
-
-static struct platform_device *smartq_devices[] __initdata = {
- &s3c_device_hsmmc1, /* Init iNAND first, ... */
- &s3c_device_hsmmc0, /* ... then the external SD card */
- &s3c_device_hsmmc2,
- &s3c_device_adc,
- &s3c_device_fb,
- &s3c_device_hwmon,
- &s3c_device_i2c0,
- &s3c_device_ohci,
- &s3c_device_rtc,
- &samsung_device_pwm,
- &s3c_device_usb_hsotg,
- &s3c64xx_device_iis0,
- &smartq_backlight_device,
- &smartq_lcd_control_device,
- &smartq_lcd_power_device,
- &smartq_usb_otg_vbus_dev,
-};
-
-static void __init smartq_lcd_mode_set(void)
-{
- u32 tmp;
-
- /* set the LCD type */
- tmp = __raw_readl(S3C64XX_SPCON);
- tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
- tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
- __raw_writel(tmp, S3C64XX_SPCON);
-
- /* remove the LCD bypass */
- tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
- tmp &= ~MIFPCON_LCD_BYPASS;
- __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-static void smartq_power_off(void)
-{
- gpio_direction_output(S3C64XX_GPK(15), 1);
-}
-
-static int __init smartq_power_off_init(void)
-{
- int ret;
-
- ret = gpio_request(S3C64XX_GPK(15), "Power control");
- if (ret < 0) {
- pr_err("%s: failed to get GPK15\n", __func__);
- return ret;
- }
-
- /* leave power on */
- gpio_direction_output(S3C64XX_GPK(15), 0);
-
- pm_power_off = smartq_power_off;
-
- return ret;
-}
-
-static int __init smartq_usb_host_init(void)
-{
- int ret;
-
- ret = gpio_request(S3C64XX_GPL(0), "USB power control");
- if (ret < 0) {
- pr_err("%s: failed to get GPL0\n", __func__);
- return ret;
- }
-
- ret = gpio_request(S3C64XX_GPL(1), "USB host power control");
- if (ret < 0) {
- pr_err("%s: failed to get GPL1\n", __func__);
- goto err;
- }
-
- if (!machine_is_smartq5()) {
- /* This isn't present on a SmartQ 5 board */
- ret = gpio_request(S3C64XX_GPL(10), "USB host overcurrent");
- if (ret < 0) {
- pr_err("%s: failed to get GPL10\n", __func__);
- goto err2;
- }
- }
-
- /* turn power off */
- gpio_direction_output(S3C64XX_GPL(0), 0);
- gpio_direction_output(S3C64XX_GPL(1), 0);
- if (!machine_is_smartq5())
- gpio_direction_input(S3C64XX_GPL(10));
-
- s3c_device_ohci.dev.platform_data = &smartq_usb_host_info;
-
- return 0;
-
-err2:
- gpio_free(S3C64XX_GPL(1));
-err:
- gpio_free(S3C64XX_GPL(0));
- return ret;
-}
-
-static int __init smartq_wifi_init(void)
-{
- int ret;
-
- ret = gpio_request(S3C64XX_GPK(1), "wifi control");
- if (ret < 0) {
- pr_err("%s: failed to get GPK1\n", __func__);
- return ret;
- }
-
- ret = gpio_request(S3C64XX_GPK(2), "wifi reset");
- if (ret < 0) {
- pr_err("%s: failed to get GPK2\n", __func__);
- gpio_free(S3C64XX_GPK(1));
- return ret;
- }
-
- /* turn power on */
- gpio_direction_output(S3C64XX_GPK(1), 1);
-
- /* reset device */
- gpio_direction_output(S3C64XX_GPK(2), 0);
- mdelay(100);
- gpio_set_value(S3C64XX_GPK(2), 1);
- gpio_direction_input(S3C64XX_GPK(2));
-
- return 0;
-}
-
-static struct map_desc smartq_iodesc[] __initdata = {};
-void __init smartq_map_io(void)
-{
- s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
- s3c64xx_set_xtal_freq(12000000);
- s3c64xx_set_xusbxti_freq(12000000);
- s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-
- smartq_lcd_mode_set();
-}
-
-static struct gpiod_lookup_table smartq_audio_gpios = {
- .dev_id = "smartq-audio",
- .table = {
- GPIO_LOOKUP("GPL", 12, "headphone detect", 0),
- GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0),
- { },
- },
-};
-
-void __init smartq_machine_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- dwc2_hsotg_set_platdata(&smartq_hsotg_pdata);
- s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
- s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
- s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
- s3c64xx_ts_set_platdata(&smartq_touchscreen_pdata);
-
- i2c_register_board_info(0, smartq_i2c_devs,
- ARRAY_SIZE(smartq_i2c_devs));
-
- WARN_ON(smartq_lcd_setup_gpio());
- WARN_ON(smartq_power_off_init());
- WARN_ON(smartq_usb_host_init());
- WARN_ON(smartq_wifi_init());
-
- pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
- gpiod_add_lookup_table(&smartq_lcd_control_gpiod_table);
- gpiod_add_lookup_table(&smartq_usb_otg_vbus_gpiod_table);
- platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
-
- gpiod_add_lookup_table(&smartq_audio_gpios);
- platform_device_register_simple("smartq-audio", -1, NULL, 0);
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/arch/arm/mach-s3c64xx/mach-smartq.h
- *
- * Copyright (C) 2010 Maurus Cuelenaere
- */
-
-#ifndef __MACH_SMARTQ_H
-#define __MACH_SMARTQ_H __FILE__
-
-#include <linux/init.h>
-
-extern void __init smartq_map_io(void);
-extern void __init smartq_machine_init(void);
-
-#endif /* __MACH_SMARTQ_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2010 Maurus Cuelenaere
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <video/samsung_fimd.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-#include "common.h"
-#include "mach-smartq.h"
-
-static struct gpio_led smartq5_leds[] = {
- {
- .name = "smartq5:green",
- .active_low = 1,
- .gpio = S3C64XX_GPN(8),
- },
- {
- .name = "smartq5:red",
- .active_low = 1,
- .gpio = S3C64XX_GPN(9),
- },
-};
-
-static struct gpio_led_platform_data smartq5_led_data = {
- .num_leds = ARRAY_SIZE(smartq5_leds),
- .leds = smartq5_leds,
-};
-
-static struct platform_device smartq5_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev.platform_data = &smartq5_led_data,
-};
-
-/* Labels according to the SmartQ manual */
-static struct gpio_keys_button smartq5_buttons[] = {
- {
- .gpio = S3C64XX_GPL(14),
- .code = KEY_POWER,
- .desc = "Power",
- .active_low = 1,
- .debounce_interval = 5,
- .type = EV_KEY,
- },
- {
- .gpio = S3C64XX_GPN(2),
- .code = KEY_KPMINUS,
- .desc = "Minus",
- .active_low = 1,
- .debounce_interval = 5,
- .type = EV_KEY,
- },
- {
- .gpio = S3C64XX_GPN(12),
- .code = KEY_KPPLUS,
- .desc = "Plus",
- .active_low = 1,
- .debounce_interval = 5,
- .type = EV_KEY,
- },
- {
- .gpio = S3C64XX_GPN(15),
- .code = KEY_ENTER,
- .desc = "Move",
- .active_low = 1,
- .debounce_interval = 5,
- .type = EV_KEY,
- },
-};
-
-static struct gpio_keys_platform_data smartq5_buttons_data = {
- .buttons = smartq5_buttons,
- .nbuttons = ARRAY_SIZE(smartq5_buttons),
-};
-
-static struct platform_device smartq5_buttons_device = {
- .name = "gpio-keys",
- .id = 0,
- .num_resources = 0,
- .dev = {
- .platform_data = &smartq5_buttons_data,
- }
-};
-
-static struct s3c_fb_pd_win smartq5_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode smartq5_lcd_timing = {
- .left_margin = 216,
- .right_margin = 40,
- .upper_margin = 35,
- .lower_margin = 10,
- .hsync_len = 1,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- .refresh = 80,
-};
-
-static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .vtiming = &smartq5_lcd_timing,
- .win[0] = &smartq5_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
- VIDCON1_INV_VDEN,
-};
-
-static struct platform_device *smartq5_devices[] __initdata = {
- &smartq5_leds_device,
- &smartq5_buttons_device,
-};
-
-static void __init smartq5_machine_init(void)
-{
- s3c_fb_set_platdata(&smartq5_lcd_pdata);
-
- smartq_machine_init();
-
- platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
-}
-
-MACHINE_START(SMARTQ5, "SmartQ 5")
- /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
- .atag_offset = 0x100,
- .nr_irqs = S3C64XX_NR_IRQS,
- .init_irq = s3c6410_init_irq,
- .map_io = smartq_map_io,
- .init_machine = smartq5_machine_init,
- .init_time = samsung_timer_init,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2010 Maurus Cuelenaere
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <video/samsung_fimd.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-#include "common.h"
-#include "mach-smartq.h"
-
-static struct gpio_led smartq7_leds[] = {
- {
- .name = "smartq7:red",
- .active_low = 1,
- .gpio = S3C64XX_GPN(8),
- },
- {
- .name = "smartq7:green",
- .active_low = 1,
- .gpio = S3C64XX_GPN(9),
- },
-};
-
-static struct gpio_led_platform_data smartq7_led_data = {
- .num_leds = ARRAY_SIZE(smartq7_leds),
- .leds = smartq7_leds,
-};
-
-static struct platform_device smartq7_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev.platform_data = &smartq7_led_data,
-};
-
-/* Labels according to the SmartQ manual */
-static struct gpio_keys_button smartq7_buttons[] = {
- {
- .gpio = S3C64XX_GPL(14),
- .code = KEY_POWER,
- .desc = "Power",
- .active_low = 1,
- .debounce_interval = 5,
- .type = EV_KEY,
- },
- {
- .gpio = S3C64XX_GPN(2),
- .code = KEY_FN,
- .desc = "Function",
- .active_low = 1,
- .debounce_interval = 5,
- .type = EV_KEY,
- },
- {
- .gpio = S3C64XX_GPN(3),
- .code = KEY_KPMINUS,
- .desc = "Minus",
- .active_low = 1,
- .debounce_interval = 5,
- .type = EV_KEY,
- },
- {
- .gpio = S3C64XX_GPN(4),
- .code = KEY_KPPLUS,
- .desc = "Plus",
- .active_low = 1,
- .debounce_interval = 5,
- .type = EV_KEY,
- },
- {
- .gpio = S3C64XX_GPN(12),
- .code = KEY_ENTER,
- .desc = "Enter",
- .active_low = 1,
- .debounce_interval = 5,
- .type = EV_KEY,
- },
- {
- .gpio = S3C64XX_GPN(15),
- .code = KEY_ESC,
- .desc = "Cancel",
- .active_low = 1,
- .debounce_interval = 5,
- .type = EV_KEY,
- },
-};
-
-static struct gpio_keys_platform_data smartq7_buttons_data = {
- .buttons = smartq7_buttons,
- .nbuttons = ARRAY_SIZE(smartq7_buttons),
-};
-
-static struct platform_device smartq7_buttons_device = {
- .name = "gpio-keys",
- .id = 0,
- .num_resources = 0,
- .dev = {
- .platform_data = &smartq7_buttons_data,
- }
-};
-
-static struct s3c_fb_pd_win smartq7_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode smartq7_lcd_timing = {
- .left_margin = 3,
- .right_margin = 5,
- .upper_margin = 1,
- .lower_margin = 20,
- .hsync_len = 10,
- .vsync_len = 3,
- .xres = 800,
- .yres = 480,
- .refresh = 80,
-};
-
-static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .vtiming = &smartq7_lcd_timing,
- .win[0] = &smartq7_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
- VIDCON1_INV_VCLK,
-};
-
-static struct platform_device *smartq7_devices[] __initdata = {
- &smartq7_leds_device,
- &smartq7_buttons_device,
-};
-
-static void __init smartq7_machine_init(void)
-{
- s3c_fb_set_platdata(&smartq7_lcd_pdata);
-
- smartq_machine_init();
-
- platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
-}
-
-MACHINE_START(SMARTQ7, "SmartQ 7")
- /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
- .atag_offset = 0x100,
- .nr_irqs = S3C64XX_NR_IRQS,
- .init_irq = s3c6410_init_irq,
- .map_io = smartq_map_io,
- .init_machine = smartq7_machine_init,
- .init_time = samsung_timer_init,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
-
-#include "common.h"
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
- },
-};
-
-static struct map_desc smdk6400_iodesc[] = {};
-
-static void __init smdk6400_map_io(void)
-{
- s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
- s3c64xx_set_xtal_freq(12000000);
- s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static struct platform_device *smdk6400_devices[] __initdata = {
- &s3c_device_hsmmc1,
- &s3c_device_i2c0,
-};
-
-static struct i2c_board_info i2c_devs[] __initdata = {
- { I2C_BOARD_INFO("wm8753", 0x1A), },
- { I2C_BOARD_INFO("24c08", 0x50), },
-};
-
-static void __init smdk6400_machine_init(void)
-{
- i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
- platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
-}
-
-MACHINE_START(SMDK6400, "SMDK6400")
- /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .atag_offset = 0x100,
- .nr_irqs = S3C64XX_NR_IRQS,
- .init_irq = s3c6400_init_irq,
- .map_io = smdk6400_map_io,
- .init_machine = smdk6400_machine_init,
- .init_time = samsung_timer_init,
-MACHINE_END
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/platform_data/s3c-hsotg.h>
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-#include <linux/mfd/wm8350/core.h>
-#include <linux/mfd/wm8350/pmic.h>
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1192_EV1
-#include <linux/mfd/wm831x/core.h>
-#include <linux/mfd/wm831x/pdata.h>
-#endif
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <linux/platform_data/ata-samsung_cf.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <linux/soc/samsung/s3c-adc.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/keypad.h>
-
-#include "backlight.h"
-#include "common.h"
-#include "regs-modem.h"
-#include "regs-srom.h"
-#include "regs-sys.h"
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
- },
-};
-
-/* framebuffer and LCD setup. */
-
-/* GPF15 = LCD backlight control
- * GPF13 => Panel power
- * GPN5 = LCD nRESET signal
- * PWM_TOUT1 => backlight brightness
- */
-
-static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
- gpio_direction_output(S3C64XX_GPF(13), 1);
-
- /* fire nRESET on power up */
- gpio_direction_output(S3C64XX_GPN(5), 0);
- msleep(10);
- gpio_direction_output(S3C64XX_GPN(5), 1);
- msleep(1);
- } else {
- gpio_direction_output(S3C64XX_GPF(13), 0);
- }
-}
-
-static struct plat_lcd_data smdk6410_lcd_power_data = {
- .set_power = smdk6410_lcd_power_set,
-};
-
-static struct platform_device smdk6410_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &smdk6410_lcd_power_data,
-};
-
-static struct s3c_fb_pd_win smdk6410_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 800,
- .yres = 480,
- .virtual_y = 480 * 2,
- .virtual_x = 800,
-};
-
-static struct fb_videomode smdk6410_lcd_timing = {
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
- .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
- .vtiming = &smdk6410_lcd_timing,
- .win[0] = &smdk6410_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-/*
- * Configuring Ethernet on SMDK6410
- *
- * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
- * The constant address below corresponds to nCS1
- *
- * 1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
- * 2) CFG6 needs to be switched to "LAN9115" side
- */
-
-static struct resource smdk6410_smsc911x_resources[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, SZ_64K),
- [1] = DEFINE_RES_NAMED(S3C_EINT(10), 1, NULL, IORESOURCE_IRQ \
- | IRQ_TYPE_LEVEL_LOW),
-};
-
-static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-
-static struct platform_device smdk6410_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
- .resource = &smdk6410_smsc911x_resources[0],
- .dev = {
- .platform_data = &smdk6410_smsc911x_pdata,
- },
-};
-
-#ifdef CONFIG_REGULATOR
-static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
- REGULATOR_SUPPLY("PVDD", "0-001b"),
- REGULATOR_SUPPLY("AVDD", "0-001b"),
-};
-
-static struct regulator_init_data __maybe_unused smdk6410_b_pwr_5v_data = {
- .constraints = {
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
- .consumer_supplies = smdk6410_b_pwr_5v_consumers,
-};
-
-static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
- .supply_name = "B_PWR_5V",
- .microvolts = 5000000,
- .init_data = &smdk6410_b_pwr_5v_data,
-};
-
-static struct platform_device smdk6410_b_pwr_5v = {
- .name = "reg-fixed-voltage",
- .id = -1,
- .dev = {
- .platform_data = &smdk6410_b_pwr_5v_pdata,
- },
-};
-#endif
-
-static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
- .setup_gpio = s3c64xx_ide_setup_gpio,
-};
-
-static uint32_t smdk6410_keymap[] __initdata = {
- /* KEY(row, col, keycode) */
- KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
- KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
- KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
- KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
- .keymap = smdk6410_keymap,
- .keymap_size = ARRAY_SIZE(smdk6410_keymap),
-};
-
-static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
- .keymap_data = &smdk6410_keymap_data,
- .rows = 2,
- .cols = 8,
-};
-
-static struct map_desc smdk6410_iodesc[] = {};
-
-static struct platform_device *smdk6410_devices[] __initdata = {
-#ifdef CONFIG_SMDK6410_SD_CH0
- &s3c_device_hsmmc0,
-#endif
-#ifdef CONFIG_SMDK6410_SD_CH1
- &s3c_device_hsmmc1,
-#endif
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &s3c_device_fb,
- &s3c_device_ohci,
- &samsung_device_pwm,
- &s3c_device_usb_hsotg,
- &s3c64xx_device_iisv4,
- &samsung_device_keypad,
-
-#ifdef CONFIG_REGULATOR
- &smdk6410_b_pwr_5v,
-#endif
- &smdk6410_lcd_powerdev,
-
- &smdk6410_smsc911x,
- &s3c_device_adc,
- &s3c_device_cfcon,
- &s3c_device_rtc,
- &s3c_device_wdt,
-};
-
-#ifdef CONFIG_REGULATOR
-/* ARM core */
-static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
- REGULATOR_SUPPLY("vddarm", NULL),
-};
-
-/* VDDARM, BUCK1 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddarm = {
- .constraints = {
- .name = "PVDD_ARM",
- .min_uV = 1000000,
- .max_uV = 1300000,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
- .consumer_supplies = smdk6410_vddarm_consumers,
-};
-
-/* VDD_INT, BUCK2 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddint = {
- .constraints = {
- .name = "PVDD_INT",
- .min_uV = 1000000,
- .max_uV = 1200000,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- },
-};
-
-/* VDD_HI, LDO3 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddhi = {
- .constraints = {
- .name = "PVDD_HI",
- .always_on = 1,
- },
-};
-
-/* VDD_PLL, LDO2 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddpll = {
- .constraints = {
- .name = "PVDD_PLL",
- .always_on = 1,
- },
-};
-
-/* VDD_UH_MMC, LDO5 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vdduh_mmc = {
- .constraints = {
- .name = "PVDD_UH+PVDD_MMC",
- .always_on = 1,
- },
-};
-
-/* VCCM3BT, LDO8 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vccmc3bt = {
- .constraints = {
- .name = "PVCCM3BT",
- .always_on = 1,
- },
-};
-
-/* VCCM2MTV, LDO11 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vccm2mtv = {
- .constraints = {
- .name = "PVCCM2MTV",
- .always_on = 1,
- },
-};
-
-/* VDD_LCD, LDO12 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddlcd = {
- .constraints = {
- .name = "PVDD_LCD",
- .always_on = 1,
- },
-};
-
-/* VDD_OTGI, LDO9 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddotgi = {
- .constraints = {
- .name = "PVDD_OTGI",
- .always_on = 1,
- },
-};
-
-/* VDD_OTG, LDO14 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddotg = {
- .constraints = {
- .name = "PVDD_OTG",
- .always_on = 1,
- },
-};
-
-/* VDD_ALIVE, LDO15 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddalive = {
- .constraints = {
- .name = "PVDD_ALIVE",
- .always_on = 1,
- },
-};
-
-/* VDD_AUDIO, VLDO_AUDIO on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddaudio = {
- .constraints = {
- .name = "PVDD_AUDIO",
- .always_on = 1,
- },
-};
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-/* S3C64xx internal logic & PLL */
-static struct regulator_init_data __maybe_unused wm8350_dcdc1_data = {
- .constraints = {
- .name = "PVDD_INT+PVDD_PLL",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .always_on = 1,
- .apply_uV = 1,
- },
-};
-
-/* Memory */
-static struct regulator_init_data __maybe_unused wm8350_dcdc3_data = {
- .constraints = {
- .name = "PVDD_MEM",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .always_on = 1,
- .state_mem = {
- .uV = 1800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- },
-};
-
-/* USB, EXT, PCM, ADC/DAC, USB, MMC */
-static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
- REGULATOR_SUPPLY("DVDD", "0-001b"),
-};
-
-static struct regulator_init_data __maybe_unused wm8350_dcdc4_data = {
- .constraints = {
- .name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
- .consumer_supplies = wm8350_dcdc4_consumers,
-};
-
-/* OTGi/1190-EV1 HPVDD & AVDD */
-static struct regulator_init_data __maybe_unused wm8350_ldo4_data = {
- .constraints = {
- .name = "PVDD_OTGI+HPVDD+AVDD",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- },
-};
-
-static struct {
- int regulator;
- struct regulator_init_data *initdata;
-} wm1190_regulators[] = {
- { WM8350_DCDC_1, &wm8350_dcdc1_data },
- { WM8350_DCDC_3, &wm8350_dcdc3_data },
- { WM8350_DCDC_4, &wm8350_dcdc4_data },
- { WM8350_DCDC_6, &smdk6410_vddarm },
- { WM8350_LDO_1, &smdk6410_vddalive },
- { WM8350_LDO_2, &smdk6410_vddotg },
- { WM8350_LDO_3, &smdk6410_vddlcd },
- { WM8350_LDO_4, &wm8350_ldo4_data },
-};
-
-static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
-{
- int i;
-
- /* Configure the IRQ line */
- s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
-
- /* Instantiate the regulators */
- for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
- wm8350_register_regulator(wm8350,
- wm1190_regulators[i].regulator,
- wm1190_regulators[i].initdata);
-
- return 0;
-}
-
-static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
- .init = smdk6410_wm8350_init,
- .irq_high = 1,
- .irq_base = IRQ_BOARD_START,
-};
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1192_EV1
-static struct gpio_led wm1192_pmic_leds[] = {
- {
- .name = "PMIC:red:power",
- .gpio = GPIO_BOARD_START + 3,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
-};
-
-static struct gpio_led_platform_data wm1192_pmic_led = {
- .num_leds = ARRAY_SIZE(wm1192_pmic_leds),
- .leds = wm1192_pmic_leds,
-};
-
-static struct platform_device wm1192_pmic_led_dev = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &wm1192_pmic_led,
- },
-};
-
-static int wm1192_pre_init(struct wm831x *wm831x)
-{
- int ret;
-
- /* Configure the IRQ line */
- s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
-
- ret = platform_device_register(&wm1192_pmic_led_dev);
- if (ret != 0)
- dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
-
- return 0;
-}
-
-static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
- .isink = 1,
- .max_uA = 27554,
-};
-
-static struct regulator_init_data __maybe_unused wm1192_dcdc3 = {
- .constraints = {
- .name = "PVDD_MEM+PVDD_GPS",
- .always_on = 1,
- },
-};
-
-static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
- REGULATOR_SUPPLY("DVDD", "0-001b"), /* WM8580 */
-};
-
-static struct regulator_init_data __maybe_unused wm1192_ldo1 = {
- .constraints = {
- .name = "PVDD_LCD+PVDD_EXT",
- .always_on = 1,
- },
- .consumer_supplies = wm1192_ldo1_consumers,
- .num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
-};
-
-static struct wm831x_status_pdata wm1192_led7_pdata = {
- .name = "LED7:green:",
-};
-
-static struct wm831x_status_pdata wm1192_led8_pdata = {
- .name = "LED8:green:",
-};
-
-static struct wm831x_pdata smdk6410_wm1192_pdata = {
- .pre_init = wm1192_pre_init,
-
- .backlight = &wm1192_backlight_pdata,
- .dcdc = {
- &smdk6410_vddarm, /* DCDC1 */
- &smdk6410_vddint, /* DCDC2 */
- &wm1192_dcdc3,
- },
- .gpio_base = GPIO_BOARD_START,
- .ldo = {
- &wm1192_ldo1, /* LDO1 */
- &smdk6410_vdduh_mmc, /* LDO2 */
- NULL, /* LDO3 NC */
- &smdk6410_vddotgi, /* LDO4 */
- &smdk6410_vddotg, /* LDO5 */
- &smdk6410_vddhi, /* LDO6 */
- &smdk6410_vddaudio, /* LDO7 */
- &smdk6410_vccm2mtv, /* LDO8 */
- &smdk6410_vddpll, /* LDO9 */
- &smdk6410_vccmc3bt, /* LDO10 */
- &smdk6410_vddalive, /* LDO11 */
- },
- .status = {
- &wm1192_led7_pdata,
- &wm1192_led8_pdata,
- },
-};
-#endif
-
-static struct i2c_board_info i2c_devs0[] __initdata = {
- { I2C_BOARD_INFO("24c08", 0x50), },
- { I2C_BOARD_INFO("wm8580", 0x1b), },
-
-#ifdef CONFIG_SMDK6410_WM1192_EV1
- { I2C_BOARD_INFO("wm8312", 0x34),
- .platform_data = &smdk6410_wm1192_pdata,
- .irq = S3C_EINT(12),
- },
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
- { I2C_BOARD_INFO("wm8350", 0x1a),
- .platform_data = &smdk6410_wm8350_pdata,
- .irq = S3C_EINT(12),
- },
-#endif
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
- { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
- .no = S3C64XX_GPF(15),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct pwm_lookup smdk6410_pwm_lookup[] = {
- PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, 78770,
- PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data smdk6410_bl_data = {
- /* Intentionally blank */
-};
-
-static struct dwc2_hsotg_plat smdk6410_hsotg_pdata;
-
-static void __init smdk6410_map_io(void)
-{
- u32 tmp;
-
- s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
- s3c64xx_set_xtal_freq(12000000);
- s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-
- /* set the LCD type */
-
- tmp = __raw_readl(S3C64XX_SPCON);
- tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
- tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
- __raw_writel(tmp, S3C64XX_SPCON);
-
- /* remove the lcd bypass */
- tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
- tmp &= ~MIFPCON_LCD_BYPASS;
- __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-static void __init smdk6410_machine_init(void)
-{
- u32 cs1;
-
- s3c_i2c0_set_platdata(NULL);
- s3c_i2c1_set_platdata(NULL);
- s3c_fb_set_platdata(&smdk6410_lcd_pdata);
- dwc2_hsotg_set_platdata(&smdk6410_hsotg_pdata);
-
- samsung_keypad_set_platdata(&smdk6410_keypad_data);
-
- s3c64xx_ts_set_platdata(NULL);
-
- /* configure nCS1 width to 16 bits */
-
- cs1 = __raw_readl(S3C64XX_SROM_BW) &
- ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
- (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
- S3C64XX_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S3C64XX_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
-
- __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
- (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
- (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
- (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
- (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
- (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
- (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
- gpio_request(S3C64XX_GPN(5), "LCD power");
- gpio_request(S3C64XX_GPF(13), "LCD power");
-
- i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- s3c_ide_set_platdata(&smdk6410_ide_pdata);
-
- platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
-
- pwm_add_table(smdk6410_pwm_lookup, ARRAY_SIZE(smdk6410_pwm_lookup));
- samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
-}
-
-MACHINE_START(SMDK6410, "SMDK6410")
- /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .atag_offset = 0x100,
- .nr_irqs = S3C64XX_NR_IRQS,
- .init_irq = s3c6410_init_irq,
- .map_io = smdk6410_map_io,
- .init_machine = smdk6410_machine_init,
- .init_time = samsung_timer_init,
-MACHINE_END
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- * Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * Samsung OneNAD Controller core functions
- */
-
-#ifndef __ASM_ARCH_ONENAND_CORE_H
-#define __ASM_ARCH_ONENAND_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_onenand_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_ONENAND
- s3c_device_onenand.name = name;
-#endif
-}
-
-static inline void s3c64xx_onenand1_setname(char *name)
-{
-#ifdef CONFIG_S3C64XX_DEV_ONENAND1
- s3c64xx_device_onenand1.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_ONENAND_CORE_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Samsung's S3C64XX generic DMA support using amba-pl08x driver.
-//
-// Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
-
-#include <linux/kernel.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl080.h>
-#include <linux/amba/pl08x.h>
-#include <linux/of.h>
-
-#include <plat/cpu.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include "regs-sys.h"
-
-static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd)
-{
- return cd->min_signal;
-}
-
-static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch)
-{
-}
-
-/*
- * DMA0
- */
-
-static struct pl08x_channel_data s3c64xx_dma0_info[] = {
- {
- .bus_id = "uart0_tx",
- .min_signal = 0,
- .max_signal = 0,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "uart0_rx",
- .min_signal = 1,
- .max_signal = 1,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "uart1_tx",
- .min_signal = 2,
- .max_signal = 2,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "uart1_rx",
- .min_signal = 3,
- .max_signal = 3,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "uart2_tx",
- .min_signal = 4,
- .max_signal = 4,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "uart2_rx",
- .min_signal = 5,
- .max_signal = 5,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "uart3_tx",
- .min_signal = 6,
- .max_signal = 6,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "uart3_rx",
- .min_signal = 7,
- .max_signal = 7,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "pcm0_tx",
- .min_signal = 8,
- .max_signal = 8,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "pcm0_rx",
- .min_signal = 9,
- .max_signal = 9,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "i2s0_tx",
- .min_signal = 10,
- .max_signal = 10,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "i2s0_rx",
- .min_signal = 11,
- .max_signal = 11,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "spi0_tx",
- .min_signal = 12,
- .max_signal = 12,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "spi0_rx",
- .min_signal = 13,
- .max_signal = 13,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "i2s2_tx",
- .min_signal = 14,
- .max_signal = 14,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "i2s2_rx",
- .min_signal = 15,
- .max_signal = 15,
- .periph_buses = PL08X_AHB2,
- }
-};
-
-static const struct dma_slave_map s3c64xx_dma0_slave_map[] = {
- { "s3c6400-uart.0", "tx", &s3c64xx_dma0_info[0] },
- { "s3c6400-uart.0", "rx", &s3c64xx_dma0_info[1] },
- { "s3c6400-uart.1", "tx", &s3c64xx_dma0_info[2] },
- { "s3c6400-uart.1", "rx", &s3c64xx_dma0_info[3] },
- { "s3c6400-uart.2", "tx", &s3c64xx_dma0_info[4] },
- { "s3c6400-uart.2", "rx", &s3c64xx_dma0_info[5] },
- { "s3c6400-uart.3", "tx", &s3c64xx_dma0_info[6] },
- { "s3c6400-uart.3", "rx", &s3c64xx_dma0_info[7] },
- { "samsung-pcm.0", "tx", &s3c64xx_dma0_info[8] },
- { "samsung-pcm.0", "rx", &s3c64xx_dma0_info[9] },
- { "samsung-i2s.0", "tx", &s3c64xx_dma0_info[10] },
- { "samsung-i2s.0", "rx", &s3c64xx_dma0_info[11] },
- { "s3c6410-spi.0", "tx", &s3c64xx_dma0_info[12] },
- { "s3c6410-spi.0", "rx", &s3c64xx_dma0_info[13] },
- { "samsung-i2s.2", "tx", &s3c64xx_dma0_info[14] },
- { "samsung-i2s.2", "rx", &s3c64xx_dma0_info[15] },
-};
-
-struct pl08x_platform_data s3c64xx_dma0_plat_data = {
- .memcpy_burst_size = PL08X_BURST_SZ_4,
- .memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
- .memcpy_prot_buff = true,
- .memcpy_prot_cache = true,
- .lli_buses = PL08X_AHB1,
- .mem_buses = PL08X_AHB1,
- .get_xfer_signal = pl08x_get_xfer_signal,
- .put_xfer_signal = pl08x_put_xfer_signal,
- .slave_channels = s3c64xx_dma0_info,
- .num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info),
- .slave_map = s3c64xx_dma0_slave_map,
- .slave_map_len = ARRAY_SIZE(s3c64xx_dma0_slave_map),
-};
-
-static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0,
- 0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data);
-
-/*
- * DMA1
- */
-
-static struct pl08x_channel_data s3c64xx_dma1_info[] = {
- {
- .bus_id = "pcm1_tx",
- .min_signal = 0,
- .max_signal = 0,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "pcm1_rx",
- .min_signal = 1,
- .max_signal = 1,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "i2s1_tx",
- .min_signal = 2,
- .max_signal = 2,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "i2s1_rx",
- .min_signal = 3,
- .max_signal = 3,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "spi1_tx",
- .min_signal = 4,
- .max_signal = 4,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "spi1_rx",
- .min_signal = 5,
- .max_signal = 5,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "ac97_out",
- .min_signal = 6,
- .max_signal = 6,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "ac97_in",
- .min_signal = 7,
- .max_signal = 7,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "ac97_mic",
- .min_signal = 8,
- .max_signal = 8,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "pwm",
- .min_signal = 9,
- .max_signal = 9,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "irda",
- .min_signal = 10,
- .max_signal = 10,
- .periph_buses = PL08X_AHB2,
- }, {
- .bus_id = "external",
- .min_signal = 11,
- .max_signal = 11,
- .periph_buses = PL08X_AHB2,
- },
-};
-
-static const struct dma_slave_map s3c64xx_dma1_slave_map[] = {
- { "samsung-pcm.1", "tx", &s3c64xx_dma1_info[0] },
- { "samsung-pcm.1", "rx", &s3c64xx_dma1_info[1] },
- { "samsung-i2s.1", "tx", &s3c64xx_dma1_info[2] },
- { "samsung-i2s.1", "rx", &s3c64xx_dma1_info[3] },
- { "s3c6410-spi.1", "tx", &s3c64xx_dma1_info[4] },
- { "s3c6410-spi.1", "rx", &s3c64xx_dma1_info[5] },
-};
-
-struct pl08x_platform_data s3c64xx_dma1_plat_data = {
- .memcpy_burst_size = PL08X_BURST_SZ_4,
- .memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
- .memcpy_prot_buff = true,
- .memcpy_prot_cache = true,
- .lli_buses = PL08X_AHB1,
- .mem_buses = PL08X_AHB1,
- .get_xfer_signal = pl08x_get_xfer_signal,
- .put_xfer_signal = pl08x_put_xfer_signal,
- .slave_channels = s3c64xx_dma1_info,
- .num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info),
- .slave_map = s3c64xx_dma1_slave_map,
- .slave_map_len = ARRAY_SIZE(s3c64xx_dma1_slave_map),
-};
-
-static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
- 0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data);
-
-static int __init s3c64xx_pl080_init(void)
-{
- if (!soc_is_s3c64xx())
- return 0;
-
- /* Set all DMA configuration to be DMA, not SDMA */
- writel(0xffffff, S3C64XX_SDMA_SEL);
-
- if (of_have_populated_dt())
- return 0;
-
- amba_device_register(&s3c64xx_dma0_device, &iomem_resource);
- amba_device_register(&s3c64xx_dma1_device, &iomem_resource);
-
- return 0;
-}
-arch_initcall(s3c64xx_pl080_init);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// S3C64XX CPU PM support.
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/pm_domain.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/wakeup-mask.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <mach/gpio-samsung.h>
-
-#include "regs-gpio-memport.h"
-#include "regs-modem.h"
-#include "regs-sys.h"
-#include "regs-syscon-power.h"
-
-struct s3c64xx_pm_domain {
- char *const name;
- u32 ena;
- u32 pwr_stat;
- struct generic_pm_domain pd;
-};
-
-static int s3c64xx_pd_off(struct generic_pm_domain *domain)
-{
- struct s3c64xx_pm_domain *pd;
- u32 val;
-
- pd = container_of(domain, struct s3c64xx_pm_domain, pd);
-
- val = __raw_readl(S3C64XX_NORMAL_CFG);
- val &= ~(pd->ena);
- __raw_writel(val, S3C64XX_NORMAL_CFG);
-
- return 0;
-}
-
-static int s3c64xx_pd_on(struct generic_pm_domain *domain)
-{
- struct s3c64xx_pm_domain *pd;
- u32 val;
- long retry = 1000000L;
-
- pd = container_of(domain, struct s3c64xx_pm_domain, pd);
-
- val = __raw_readl(S3C64XX_NORMAL_CFG);
- val |= pd->ena;
- __raw_writel(val, S3C64XX_NORMAL_CFG);
-
- /* Not all domains provide power status readback */
- if (pd->pwr_stat) {
- do {
- cpu_relax();
- if (__raw_readl(S3C64XX_BLK_PWR_STAT) & pd->pwr_stat)
- break;
- } while (retry--);
-
- if (!retry) {
- pr_err("Failed to start domain %s\n", pd->name);
- return -EBUSY;
- }
- }
-
- return 0;
-}
-
-static struct s3c64xx_pm_domain s3c64xx_pm_irom = {
- .name = "IROM",
- .ena = S3C64XX_NORMALCFG_IROM_ON,
- .pd = {
- .power_off = s3c64xx_pd_off,
- .power_on = s3c64xx_pd_on,
- },
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_etm = {
- .name = "ETM",
- .ena = S3C64XX_NORMALCFG_DOMAIN_ETM_ON,
- .pwr_stat = S3C64XX_BLKPWRSTAT_ETM,
- .pd = {
- .power_off = s3c64xx_pd_off,
- .power_on = s3c64xx_pd_on,
- },
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_s = {
- .name = "S",
- .ena = S3C64XX_NORMALCFG_DOMAIN_S_ON,
- .pwr_stat = S3C64XX_BLKPWRSTAT_S,
- .pd = {
- .power_off = s3c64xx_pd_off,
- .power_on = s3c64xx_pd_on,
- },
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_f = {
- .name = "F",
- .ena = S3C64XX_NORMALCFG_DOMAIN_F_ON,
- .pwr_stat = S3C64XX_BLKPWRSTAT_F,
- .pd = {
- .power_off = s3c64xx_pd_off,
- .power_on = s3c64xx_pd_on,
- },
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_p = {
- .name = "P",
- .ena = S3C64XX_NORMALCFG_DOMAIN_P_ON,
- .pwr_stat = S3C64XX_BLKPWRSTAT_P,
- .pd = {
- .power_off = s3c64xx_pd_off,
- .power_on = s3c64xx_pd_on,
- },
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_i = {
- .name = "I",
- .ena = S3C64XX_NORMALCFG_DOMAIN_I_ON,
- .pwr_stat = S3C64XX_BLKPWRSTAT_I,
- .pd = {
- .power_off = s3c64xx_pd_off,
- .power_on = s3c64xx_pd_on,
- },
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_g = {
- .name = "G",
- .ena = S3C64XX_NORMALCFG_DOMAIN_G_ON,
- .pd = {
- .power_off = s3c64xx_pd_off,
- .power_on = s3c64xx_pd_on,
- },
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_v = {
- .name = "V",
- .ena = S3C64XX_NORMALCFG_DOMAIN_V_ON,
- .pwr_stat = S3C64XX_BLKPWRSTAT_V,
- .pd = {
- .power_off = s3c64xx_pd_off,
- .power_on = s3c64xx_pd_on,
- },
-};
-
-static struct s3c64xx_pm_domain *s3c64xx_always_on_pm_domains[] = {
- &s3c64xx_pm_irom,
-};
-
-static struct s3c64xx_pm_domain *s3c64xx_pm_domains[] = {
- &s3c64xx_pm_etm,
- &s3c64xx_pm_g,
- &s3c64xx_pm_v,
- &s3c64xx_pm_i,
- &s3c64xx_pm_p,
- &s3c64xx_pm_s,
- &s3c64xx_pm_f,
-};
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-void s3c_pm_debug_smdkled(u32 set, u32 clear)
-{
- unsigned long flags;
- int i;
-
- local_irq_save(flags);
- for (i = 0; i < 4; i++) {
- if (clear & (1 << i))
- gpio_set_value(S3C64XX_GPN(12 + i), 0);
- if (set & (1 << i))
- gpio_set_value(S3C64XX_GPN(12 + i), 1);
- }
- local_irq_restore(flags);
-}
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save core_save[] = {
- SAVE_ITEM(S3C64XX_MEM0DRVCON),
- SAVE_ITEM(S3C64XX_MEM1DRVCON),
-};
-
-static struct sleep_save misc_save[] = {
- SAVE_ITEM(S3C64XX_AHB_CON0),
- SAVE_ITEM(S3C64XX_AHB_CON1),
- SAVE_ITEM(S3C64XX_AHB_CON2),
-
- SAVE_ITEM(S3C64XX_SPCON),
-
- SAVE_ITEM(S3C64XX_MEM0CONSTOP),
- SAVE_ITEM(S3C64XX_MEM1CONSTOP),
- SAVE_ITEM(S3C64XX_MEM0CONSLP0),
- SAVE_ITEM(S3C64XX_MEM0CONSLP1),
- SAVE_ITEM(S3C64XX_MEM1CONSLP),
-
- SAVE_ITEM(S3C64XX_SDMA_SEL),
- SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
-
- SAVE_ITEM(S3C64XX_NORMAL_CFG),
-};
-
-void s3c_pm_configure_extint(void)
-{
- __raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
-}
-
-void s3c_pm_restore_core(void)
-{
- __raw_writel(0, S3C64XX_EINT_MASK);
-
- s3c_pm_debug_smdkled(1 << 2, 0);
-
- s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
- s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
-}
-
-void s3c_pm_save_core(void)
-{
- s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
- s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
-}
-#endif
-
-/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
- * put the per-cpu code in here until any new cpu comes along and changes
- * this.
- */
-
-static int s3c64xx_cpu_suspend(unsigned long arg)
-{
- unsigned long tmp;
-
- /* set our standby method to sleep */
-
- tmp = __raw_readl(S3C64XX_PWR_CFG);
- tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
- tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
- __raw_writel(tmp, S3C64XX_PWR_CFG);
-
- /* clear any old wakeup */
-
- __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
- S3C64XX_WAKEUP_STAT);
-
- /* set the LED state to 0110 over sleep */
- s3c_pm_debug_smdkled(3 << 1, 0xf);
-
- /* issue the standby signal into the pm unit. Note, we
- * issue a write-buffer drain just in case */
-
- tmp = 0;
-
- asm("b 1f\n\t"
- ".align 5\n\t"
- "1:\n\t"
- "mcr p15, 0, %0, c7, c10, 5\n\t"
- "mcr p15, 0, %0, c7, c10, 4\n\t"
- "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
-
- /* we should never get past here */
-
- pr_info("Failed to suspend the system\n");
- return 1; /* Aborting suspend */
-}
-
-/* mapping of interrupts to parts of the wakeup mask */
-static const struct samsung_wakeup_mask wake_irqs[] = {
- { .irq = IRQ_RTC_ALARM, .bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, },
- { .irq = IRQ_RTC_TIC, .bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, },
- { .irq = IRQ_PENDN, .bit = S3C64XX_PWRCFG_TS_DISABLE, },
- { .irq = IRQ_HSMMC0, .bit = S3C64XX_PWRCFG_MMC0_DISABLE, },
- { .irq = IRQ_HSMMC1, .bit = S3C64XX_PWRCFG_MMC1_DISABLE, },
- { .irq = IRQ_HSMMC2, .bit = S3C64XX_PWRCFG_MMC2_DISABLE, },
- { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_BATF_DISABLE},
- { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
- { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_HSI_DISABLE },
- { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
-};
-
-static void s3c64xx_pm_prepare(void)
-{
- samsung_sync_wakemask(S3C64XX_PWR_CFG,
- wake_irqs, ARRAY_SIZE(wake_irqs));
-
- /* store address of resume. */
- __raw_writel(__pa_symbol(s3c_cpu_resume), S3C64XX_INFORM0);
-
- /* ensure previous wakeup state is cleared before sleeping */
- __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
-}
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
-{
- u32 ucon;
- u32 ucon_clk
- u32 save_clk;
- u32 new_ucon;
- u32 delta;
-
- if (!soc_is_s3c64xx())
- return;
-
- ucon = __raw_readl(regs + S3C2410_UCON);
- ucon_clk = ucon & S3C6400_UCON_CLKMASK;
- sav_clk = save->ucon & S3C6400_UCON_CLKMASK;
-
- /* S3C64XX UART blocks only support level interrupts, so ensure that
- * when we restore unused UART blocks we force the level interrupt
- * settigs. */
- save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
-
- /* We have a constraint on changing the clock type of the UART
- * between UCLKx and PCLK, so ensure that when we restore UCON
- * that the CLK field is correctly modified if the bootloader
- * has changed anything.
- */
- if (ucon_clk != save_clk) {
- new_ucon = save->ucon;
- delta = ucon_clk ^ save_clk;
-
- /* change from UCLKx => wrong PCLK,
- * either UCLK can be tested for by a bit-test
- * with UCLK0 */
- if (ucon_clk & S3C6400_UCON_UCLK0 &&
- !(save_clk & S3C6400_UCON_UCLK0) &&
- delta & S3C6400_UCON_PCLK2) {
- new_ucon &= ~S3C6400_UCON_UCLK0;
- } else if (delta == S3C6400_UCON_PCLK2) {
- /* as an precaution, don't change from
- * PCLK2 => PCLK or vice-versa */
- new_ucon ^= S3C6400_UCON_PCLK2;
- }
-
- S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
- ucon, new_ucon, save->ucon);
- save->ucon = new_ucon;
- }
-}
-#endif
-
-int __init s3c64xx_pm_init(void)
-{
- int i;
-
- s3c_pm_init();
-
- for (i = 0; i < ARRAY_SIZE(s3c64xx_always_on_pm_domains); i++)
- pm_genpd_init(&s3c64xx_always_on_pm_domains[i]->pd,
- &pm_domain_always_on_gov, false);
-
- for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
- pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
-
-#ifdef CONFIG_S3C_DEV_FB
- if (dev_get_platdata(&s3c_device_fb.dev))
- pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
-#endif
-
- return 0;
-}
-
-static __init int s3c64xx_pm_initcall(void)
-{
- if (!soc_is_s3c64xx())
- return 0;
-
- pm_cpu_prep = s3c64xx_pm_prepare;
- pm_cpu_sleep = s3c64xx_cpu_suspend;
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
- gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
- gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
- gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
- gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
- gpio_direction_output(S3C64XX_GPN(12), 0);
- gpio_direction_output(S3C64XX_GPN(13), 0);
- gpio_direction_output(S3C64XX_GPN(14), 0);
- gpio_direction_output(S3C64XX_GPN(15), 0);
-#endif
-
- return 0;
-}
-arch_initcall(s3c64xx_pm_initcall);
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIO memory port register definitions
- */
-
-#ifndef __MACH_S3C64XX_REGS_GPIO_MEMPORT_H
-#define __MACH_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
-
-#define S3C64XX_MEM0CONSTOP S3C64XX_GPIOREG(0x1B0)
-#define S3C64XX_MEM1CONSTOP S3C64XX_GPIOREG(0x1B4)
-
-#define S3C64XX_MEM0CONSLP0 S3C64XX_GPIOREG(0x1C0)
-#define S3C64XX_MEM0CONSLP1 S3C64XX_GPIOREG(0x1C4)
-#define S3C64XX_MEM1CONSLP S3C64XX_GPIOREG(0x1C8)
-
-#define S3C64XX_MEM0DRVCON S3C64XX_GPIOREG(0x1D0)
-#define S3C64XX_MEM1DRVCON S3C64XX_GPIOREG(0x1D4)
-
-#endif /* __MACH_S3C64XX_REGS_GPIO_MEMPORT_H */
-
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - modem block registers
- */
-
-#ifndef __MACH_S3C64XX_REGS_MODEM_H
-#define __MACH_S3C64XX_REGS_MODEM_H __FILE__
-
-#define S3C64XX_MODEMREG(x) (S3C64XX_VA_MODEM + (x))
-
-#define S3C64XX_MODEM_INT2AP S3C64XX_MODEMREG(0x0)
-#define S3C64XX_MODEM_INT2MODEM S3C64XX_MODEMREG(0x4)
-#define S3C64XX_MODEM_MIFCON S3C64XX_MODEMREG(0x8)
-#define S3C64XX_MODEM_MIFPCON S3C64XX_MODEMREG(0xC)
-#define S3C64XX_MODEM_INTCLR S3C64XX_MODEMREG(0x10)
-#define S3C64XX_MODEM_DMA_TXADDR S3C64XX_MODEMREG(0x14)
-#define S3C64XX_MODEM_DMA_RXADDR S3C64XX_MODEMREG(0x18)
-
-#define MIFPCON_INT2M_LEVEL (1 << 4)
-#define MIFPCON_LCD_BYPASS (1 << 3)
-
-#endif /* __MACH_S3C64XX_REGS_MODEM_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2009 Andy Green <andy@warmcat.com>
- *
- * S3C64XX SROM definitions
- */
-
-#ifndef __MACH_S3C64XX_REGS_SROM_H
-#define __MACH_S3C64XX_REGS_SROM_H __FILE__
-
-#define S3C64XX_SROMREG(x) (S3C_VA_MEM + (x))
-
-#define S3C64XX_SROM_BW S3C64XX_SROMREG(0)
-#define S3C64XX_SROM_BC0 S3C64XX_SROMREG(4)
-#define S3C64XX_SROM_BC1 S3C64XX_SROMREG(8)
-#define S3C64XX_SROM_BC2 S3C64XX_SROMREG(0xc)
-#define S3C64XX_SROM_BC3 S3C64XX_SROMREG(0x10)
-#define S3C64XX_SROM_BC4 S3C64XX_SROMREG(0x14)
-#define S3C64XX_SROM_BC5 S3C64XX_SROMREG(0x18)
-
-/*
- * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4
- */
-
-#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT 0
-#define S3C64XX_SROM_BW__WAITENABLE__SHIFT 2
-#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT 3
-#define S3C64XX_SROM_BW__CS_MASK 0xf
-
-#define S3C64XX_SROM_BW__NCS0__SHIFT 0
-#define S3C64XX_SROM_BW__NCS1__SHIFT 4
-#define S3C64XX_SROM_BW__NCS2__SHIFT 8
-#define S3C64XX_SROM_BW__NCS3__SHIFT 0xc
-#define S3C64XX_SROM_BW__NCS4__SHIFT 0x10
-
-/*
- * applies to same to BCS0 - BCS4
- */
-
-#define S3C64XX_SROM_BCX__PMC__SHIFT 0
-#define S3C64XX_SROM_BCX__PMC__MASK 3
-#define S3C64XX_SROM_BCX__TACP__SHIFT 4
-#define S3C64XX_SROM_BCX__TACP__MASK 0xf
-#define S3C64XX_SROM_BCX__TCAH__SHIFT 8
-#define S3C64XX_SROM_BCX__TCAH__MASK 0xf
-#define S3C64XX_SROM_BCX__TCOH__SHIFT 12
-#define S3C64XX_SROM_BCX__TCOH__MASK 0xf
-#define S3C64XX_SROM_BCX__TACC__SHIFT 16
-#define S3C64XX_SROM_BCX__TACC__MASK 0x1f
-#define S3C64XX_SROM_BCX__TCOS__SHIFT 24
-#define S3C64XX_SROM_BCX__TCOS__MASK 0xf
-#define S3C64XX_SROM_BCX__TACS__SHIFT 28
-#define S3C64XX_SROM_BCX__TACS__MASK 0xf
-
-#endif /* __MACH_S3C64XX_REGS_SROM_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX system register definitions
-*/
-
-#ifndef __MACH_S3C64XX_REGS_SYS_H
-#define __MACH_S3C64XX_REGS_SYS_H __FILE__
-
-#define S3C_SYSREG(x) (S3C_VA_SYS + (x))
-
-#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100)
-#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104)
-#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108)
-
-#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110)
-
-#define S3C64XX_OTHERS S3C_SYSREG(0x900)
-
-#define S3C64XX_OTHERS_USBMASK (1 << 16)
-#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6)
-
-#endif /* __MACH_S3C64XX_REGS_SYS_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - syscon power and sleep control registers
-*/
-
-#ifndef __MACH_S3C64XX_REGS_SYSCON_POWER_H
-#define __MACH_S3C64XX_REGS_SYSCON_POWER_H __FILE__
-
-#define S3C64XX_PWR_CFG S3C_SYSREG(0x804)
-
-#define S3C64XX_PWRCFG_OSC_OTG_DISABLE (1 << 17)
-#define S3C64XX_PWRCFG_MMC2_DISABLE (1 << 16)
-#define S3C64XX_PWRCFG_MMC1_DISABLE (1 << 15)
-#define S3C64XX_PWRCFG_MMC0_DISABLE (1 << 14)
-#define S3C64XX_PWRCFG_HSI_DISABLE (1 << 13)
-#define S3C64XX_PWRCFG_TS_DISABLE (1 << 12)
-#define S3C64XX_PWRCFG_RTC_TICK_DISABLE (1 << 11)
-#define S3C64XX_PWRCFG_RTC_ALARM_DISABLE (1 << 10)
-#define S3C64XX_PWRCFG_MSM_DISABLE (1 << 9)
-#define S3C64XX_PWRCFG_KEY_DISABLE (1 << 8)
-#define S3C64XX_PWRCFG_BATF_DISABLE (1 << 7)
-
-#define S3C64XX_PWRCFG_CFG_WFI_MASK (0x3 << 5)
-#define S3C64XX_PWRCFG_CFG_WFI_SHIFT (5)
-#define S3C64XX_PWRCFG_CFG_WFI_IGNORE (0x0 << 5)
-#define S3C64XX_PWRCFG_CFG_WFI_IDLE (0x1 << 5)
-#define S3C64XX_PWRCFG_CFG_WFI_STOP (0x2 << 5)
-#define S3C64XX_PWRCFG_CFG_WFI_SLEEP (0x3 << 5)
-
-#define S3C64XX_PWRCFG_CFG_BATFLT_MASK (0x3 << 3)
-#define S3C64XX_PWRCFG_CFG_BATFLT_SHIFT (3)
-#define S3C64XX_PWRCFG_CFG_BATFLT_IGNORE (0x0 << 3)
-#define S3C64XX_PWRCFG_CFG_BATFLT_IRQ (0x1 << 3)
-#define S3C64XX_PWRCFG_CFG_BATFLT_SLEEP (0x3 << 3)
-
-#define S3C64XX_PWRCFG_CFG_BAT_WAKE (1 << 2)
-#define S3C64XX_PWRCFG_OSC27_EN (1 << 0)
-
-#define S3C64XX_EINT_MASK S3C_SYSREG(0x808)
-
-#define S3C64XX_NORMAL_CFG S3C_SYSREG(0x810)
-
-#define S3C64XX_NORMALCFG_IROM_ON (1 << 30)
-#define S3C64XX_NORMALCFG_DOMAIN_ETM_ON (1 << 16)
-#define S3C64XX_NORMALCFG_DOMAIN_S_ON (1 << 15)
-#define S3C64XX_NORMALCFG_DOMAIN_F_ON (1 << 14)
-#define S3C64XX_NORMALCFG_DOMAIN_P_ON (1 << 13)
-#define S3C64XX_NORMALCFG_DOMAIN_I_ON (1 << 12)
-#define S3C64XX_NORMALCFG_DOMAIN_G_ON (1 << 10)
-#define S3C64XX_NORMALCFG_DOMAIN_V_ON (1 << 9)
-
-#define S3C64XX_STOP_CFG S3C_SYSREG(0x814)
-
-#define S3C64XX_STOPCFG_MEMORY_ARM_ON (1 << 29)
-#define S3C64XX_STOPCFG_TOP_MEMORY_ON (1 << 20)
-#define S3C64XX_STOPCFG_ARM_LOGIC_ON (1 << 17)
-#define S3C64XX_STOPCFG_TOP_LOGIC_ON (1 << 8)
-#define S3C64XX_STOPCFG_OSC_EN (1 << 0)
-
-#define S3C64XX_SLEEP_CFG S3C_SYSREG(0x818)
-
-#define S3C64XX_SLEEPCFG_OSC_EN (1 << 0)
-
-#define S3C64XX_STOP_MEM_CFG S3C_SYSREG(0x81c)
-
-#define S3C64XX_STOPMEMCFG_MODEMIF_RETAIN (1 << 6)
-#define S3C64XX_STOPMEMCFG_HOSTIF_RETAIN (1 << 5)
-#define S3C64XX_STOPMEMCFG_OTG_RETAIN (1 << 4)
-#define S3C64XX_STOPMEMCFG_HSMCC_RETAIN (1 << 3)
-#define S3C64XX_STOPMEMCFG_IROM_RETAIN (1 << 2)
-#define S3C64XX_STOPMEMCFG_IRDA_RETAIN (1 << 1)
-#define S3C64XX_STOPMEMCFG_NFCON_RETAIN (1 << 0)
-
-#define S3C64XX_OSC_STABLE S3C_SYSREG(0x824)
-#define S3C64XX_PWR_STABLE S3C_SYSREG(0x828)
-
-#define S3C64XX_WAKEUP_STAT S3C_SYSREG(0x908)
-
-#define S3C64XX_WAKEUPSTAT_MMC2 (1 << 11)
-#define S3C64XX_WAKEUPSTAT_MMC1 (1 << 10)
-#define S3C64XX_WAKEUPSTAT_MMC0 (1 << 9)
-#define S3C64XX_WAKEUPSTAT_HSI (1 << 8)
-#define S3C64XX_WAKEUPSTAT_BATFLT (1 << 6)
-#define S3C64XX_WAKEUPSTAT_MSM (1 << 5)
-#define S3C64XX_WAKEUPSTAT_KEY (1 << 4)
-#define S3C64XX_WAKEUPSTAT_TS (1 << 3)
-#define S3C64XX_WAKEUPSTAT_RTC_TICK (1 << 2)
-#define S3C64XX_WAKEUPSTAT_RTC_ALARM (1 << 1)
-#define S3C64XX_WAKEUPSTAT_EINT (1 << 0)
-
-#define S3C64XX_BLK_PWR_STAT S3C_SYSREG(0x90c)
-
-#define S3C64XX_BLKPWRSTAT_G (1 << 7)
-#define S3C64XX_BLKPWRSTAT_ETM (1 << 6)
-#define S3C64XX_BLKPWRSTAT_S (1 << 5)
-#define S3C64XX_BLKPWRSTAT_F (1 << 4)
-#define S3C64XX_BLKPWRSTAT_P (1 << 3)
-#define S3C64XX_BLKPWRSTAT_I (1 << 2)
-#define S3C64XX_BLKPWRSTAT_V (1 << 1)
-#define S3C64XX_BLKPWRSTAT_TOP (1 << 0)
-
-#define S3C64XX_INFORM0 S3C_SYSREG(0xA00)
-#define S3C64XX_INFORM1 S3C_SYSREG(0xA04)
-#define S3C64XX_INFORM2 S3C_SYSREG(0xA08)
-#define S3C64XX_INFORM3 S3C_SYSREG(0xA0C)
-
-#endif /* __MACH_S3C64XX_REGS_SYSCON_POWER_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB2.0 Highspeed/OtG device PHY registers
-*/
-
-/* Note, this is a separate header file as some of the clock framework
- * needs to touch this if the clk_48m is used as the USB OHCI or other
- * peripheral source.
-*/
-
-#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
-#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
-
-/* S3C64XX_PA_USB_HSPHY */
-
-#define S3C_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
-
-#define S3C_PHYPWR S3C_HSOTG_PHYREG(0x00)
-#define S3C_PHYPWR_NORMAL_MASK (0x19 << 0)
-#define S3C_PHYPWR_OTG_DISABLE (1 << 4)
-#define S3C_PHYPWR_ANALOG_POWERDOWN (1 << 3)
-#define SRC_PHYPWR_FORCE_SUSPEND (1 << 1)
-
-#define S3C_PHYCLK S3C_HSOTG_PHYREG(0x04)
-#define S3C_PHYCLK_MODE_USB11 (1 << 6)
-#define S3C_PHYCLK_EXT_OSC (1 << 5)
-#define S3C_PHYCLK_CLK_FORCE (1 << 4)
-#define S3C_PHYCLK_ID_PULL (1 << 2)
-#define S3C_PHYCLK_CLKSEL_MASK (0x3 << 0)
-#define S3C_PHYCLK_CLKSEL_SHIFT (0)
-#define S3C_PHYCLK_CLKSEL_48M (0x0 << 0)
-#define S3C_PHYCLK_CLKSEL_12M (0x2 << 0)
-#define S3C_PHYCLK_CLKSEL_24M (0x3 << 0)
-
-#define S3C_RSTCON S3C_HSOTG_PHYREG(0x08)
-#define S3C_RSTCON_PHYCLK (1 << 2)
-#define S3C_RSTCON_HCLK (1 << 1)
-#define S3C_RSTCON_PHY (1 << 0)
-
-#define S3C_PHYTUNE S3C_HSOTG_PHYREG(0x20)
-
-#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2009 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-
-/*
- * NOTE: Code in this file is not used when booting with Device Tree support.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/iic-core.h>
-
-#include "common.h"
-#include "onenand-core.h"
-
-void __init s3c6400_map_io(void)
-{
- /* setup SDHCI */
-
- s3c6400_default_sdhci0();
- s3c6400_default_sdhci1();
- s3c6400_default_sdhci2();
-
- /* the i2c devices are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
-
- s3c_device_nand.name = "s3c6400-nand";
-
- s3c_onenand_setname("s3c6400-onenand");
- s3c64xx_onenand1_setname("s3c6400-onenand");
-}
-
-void __init s3c6400_init_irq(void)
-{
- /* VIC0 does not have IRQS 5..7,
- * VIC1 is fully populated. */
- s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
-}
-
-static struct bus_type s3c6400_subsys = {
- .name = "s3c6400-core",
- .dev_name = "s3c6400-core",
-};
-
-static struct device s3c6400_dev = {
- .bus = &s3c6400_subsys,
-};
-
-static int __init s3c6400_core_init(void)
-{
- /* Not applicable when using DT. */
- if (of_have_populated_dt() || soc_is_s3c64xx())
- return 0;
-
- return subsys_system_register(&s3c6400_subsys, NULL);
-}
-
-core_initcall(s3c6400_core_init);
-
-int __init s3c6400_init(void)
-{
- printk("S3C6400: Initialising architecture\n");
-
- return device_register(&s3c6400_dev);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Simtec Electronics
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-
-/*
- * NOTE: Code in this file is not used when booting with Device Tree support.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-
-#include <linux/soc/samsung/s3c-pm.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/iic-core.h>
-
-#include "ata-core.h"
-#include "common.h"
-#include "onenand-core.h"
-
-void __init s3c6410_map_io(void)
-{
- /* initialise device information early */
- s3c6410_default_sdhci0();
- s3c6410_default_sdhci1();
- s3c6410_default_sdhci2();
-
- /* the i2c devices are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
-
- s3c_adc_setname("s3c64xx-adc");
- s3c_device_nand.name = "s3c6400-nand";
- s3c_onenand_setname("s3c6410-onenand");
- s3c64xx_onenand1_setname("s3c6410-onenand");
- s3c_cfcon_setname("s3c64xx-pata");
-}
-
-void __init s3c6410_init_irq(void)
-{
- /* VIC0 is missing IRQ7, VIC1 is fully populated. */
- s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
-}
-
-struct bus_type s3c6410_subsys = {
- .name = "s3c6410-core",
- .dev_name = "s3c6410-core",
-};
-
-static struct device s3c6410_dev = {
- .bus = &s3c6410_subsys,
-};
-
-static int __init s3c6410_core_init(void)
-{
- /* Not applicable when using DT. */
- if (of_have_populated_dt() || !soc_is_s3c64xx())
- return 0;
-
- return subsys_system_register(&s3c6410_subsys, NULL);
-}
-
-core_initcall(s3c6410_core_init);
-
-int __init s3c6410_init(void)
-{
- printk("S3C6410: Initialising architecture\n");
-
- return device_register(&s3c6410_dev);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// Base S3C64XX setup information for 24bpp LCD framebuffer
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
-
-void s3c64xx_fb_gpio_setup_24bpp(void)
-{
- s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2));
- s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2));
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// Base S3C64XX I2C bus 0 gpio configuration
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S3C64XX_GPB(5), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// Base S3C64XX I2C bus 1 gpio configuration
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S3C64XX_GPB(2), 2,
- S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2010 Samsung Electronics Co., Ltd.
-// http://www.samsung.com/
-//
-// S3C64XX setup information for IDE
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
-#include <linux/platform_data/ata-samsung_cf.h>
-
-void s3c64xx_ide_setup_gpio(void)
-{
- u32 reg;
-
- reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
-
- /* Independent CF interface, CF chip select configuration */
- writel(reg | MEM_SYS_CFG_INDEP_CF |
- MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
-
- s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
-
- /* Set XhiDATA[15:0] pins as CF Data[15:0] */
- s3c_gpio_cfgpin_range(S3C64XX_GPK(0), 16, S3C_GPIO_SFN(5));
-
- /* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
- s3c_gpio_cfgpin_range(S3C64XX_GPL(0), 3, S3C_GPIO_SFN(6));
-
- /* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
- s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
- s3c_gpio_cfgpin_range(S3C64XX_GPM(0), 5, S3C_GPIO_SFN(6));
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2010 Samsung Electronics Co., Ltd.
-// http://www.samsung.com/
-//
-// GPIO configuration for S3C64XX KeyPad device
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/keypad.h>
-#include <mach/gpio-samsung.h>
-
-void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
-{
- /* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
- s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), rows, S3C_GPIO_SFN(3));
-
- /* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
- s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3));
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-#include <mach/gpio-samsung.h>
-
-void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPG pins to special-function 2 */
- s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
- }
-}
-
-void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPH pins to special-function 2 */
- s3c_gpio_cfgrange_nopull(S3C64XX_GPH(0), 2 + width, S3C_GPIO_SFN(2));
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
- }
-}
-
-void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
- /* Set all the necessary GPH pins to special-function 3 */
- s3c_gpio_cfgrange_nopull(S3C64XX_GPH(6), width, S3C_GPIO_SFN(3));
-
- /* Set all the necessary GPC pins to special-function 3 */
- s3c_gpio_cfgrange_nopull(S3C64XX_GPC(4), 2, S3C_GPIO_SFN(3));
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2011 Samsung Electronics Ltd.
-// http://www.samsung.com/
-
-#include <linux/gpio.h>
-#include <linux/platform_data/spi-s3c64xx.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-int s3c64xx_spi0_cfg_gpio(void)
-{
- s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-int s3c64xx_spi1_cfg_gpio(void)
-{
- s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2011 Samsung Electronics Co.Ltd
-// Author: Joonyoung Shim <jy0922.shim@samsung.com>
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/usb-phy.h>
-
-#include "regs-sys.h"
-#include "regs-usb-hsotg-phy.h"
-
-enum samsung_usb_phy_type {
- USB_PHY_TYPE_DEVICE,
- USB_PHY_TYPE_HOST,
-};
-
-static int s3c_usb_otgphy_init(struct platform_device *pdev)
-{
- struct clk *xusbxti;
- u32 phyclk;
-
- writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
-
- /* set clock frequency for PLL */
- phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
-
- xusbxti = clk_get(&pdev->dev, "xusbxti");
- if (!IS_ERR(xusbxti)) {
- switch (clk_get_rate(xusbxti)) {
- case 12 * MHZ:
- phyclk |= S3C_PHYCLK_CLKSEL_12M;
- break;
- case 24 * MHZ:
- phyclk |= S3C_PHYCLK_CLKSEL_24M;
- break;
- default:
- case 48 * MHZ:
- /* default reference clock */
- break;
- }
- clk_put(xusbxti);
- }
-
- /* TODO: select external clock/oscillator */
- writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
-
- /* set to normal OTG PHY */
- writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
- mdelay(1);
-
- /* reset OTG PHY and Link */
- writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
- S3C_RSTCON);
- udelay(20); /* at-least 10uS */
- writel(0, S3C_RSTCON);
-
- return 0;
-}
-
-static int s3c_usb_otgphy_exit(struct platform_device *pdev)
-{
- writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
- S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
-
- writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
-
- return 0;
-}
-
-int s3c_usb_phy_init(struct platform_device *pdev, int type)
-{
- if (type == USB_PHY_TYPE_DEVICE)
- return s3c_usb_otgphy_init(pdev);
-
- return -EINVAL;
-}
-
-int s3c_usb_phy_exit(struct platform_device *pdev, int type)
-{
- if (type == USB_PHY_TYPE_DEVICE)
- return s3c_usb_otgphy_exit(pdev);
-
- return -EINVAL;
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/* linux/arch/arm/plat-s3c64xx/sleep.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU sleep code
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/map.h>
-
-#undef S3C64XX_VA_GPIO
-#define S3C64XX_VA_GPIO (0x0)
-
-#include <mach/regs-gpio.h>
-
-#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
-
- .text
-
- /* Sleep magic, the word before the resume entry point so that the
- * bootloader can check for a resumeable image. */
-
- .word 0x2bedf00d
-
- /* s3c_cpu_reusme
- *
- * This is the entry point, stored by whatever method the bootloader
- * requires to get the kernel runnign again. This code expects to be
- * entered with no caches live and the MMU disabled. It will then
- * restore the MMU and other basic CP registers saved and restart
- * the kernel C code to finish the resume code.
- */
-
-ENTRY(s3c_cpu_resume)
- msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
- ldr r2, =LL_UART /* for debug */
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-
-#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00)
-#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04)
-
-#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
- /* Initialise the GPIO state if we are debugging via the SMDK LEDs,
- * as the uboot version supplied resets these to inputs during the
- * resume checks.
- */
-
- ldr r3, =S3C64XX_PA_GPIO
- ldr r0, [ r3, #S3C64XX_GPNCON ]
- bic r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
- S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
- orr r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
- S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
- str r0, [ r3, #S3C64XX_GPNCON ]
-
- ldr r0, [ r3, #S3C64XX_GPNDAT ]
- bic r0, r0, #0xf << 12 @ GPN12..15
- orr r0, r0, #1 << 15 @ GPN15
- str r0, [ r3, #S3C64XX_GPNDAT ]
-#endif
- b cpu_resume
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright 2009 Simtec Electronics
-
-config PLAT_SAMSUNG
- bool
- depends on PLAT_S3C24XX || ARCH_S3C64XX
- default y
- select GENERIC_IRQ_CHIP
- select NO_IOPORT_MAP
- select SOC_SAMSUNG
- help
- Base platform code for all Samsung SoC based systems
-
-config SAMSUNG_PM
- bool
- depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX)
- default y
- help
- Base platform power management code for samsung code
-
-if PLAT_SAMSUNG
-menu "Samsung Common options"
-
-# boot configurations
-
-comment "Boot options"
-
-config S3C_LOWLEVEL_UART_PORT
- int "S3C UART to use for low-level messages"
- depends on ARCH_S3C64XX
- default 0
- help
- Choice of which UART port to use for the low-level messages,
- such as the `Uncompressing...` at start time. The value of
- this configuration should be between zero and two. The port
- must have been initialised by the boot-loader before use.
-
-config SAMSUNG_ATAGS
- def_bool n
- depends on ATAGS
- help
- This option enables ATAGS based boot support code for
- Samsung platforms, including static platform devices, legacy
- clock, timer and interrupt initialization, etc.
-
- Platforms that support only DT based boot need not to select
- this option.
-
-if SAMSUNG_ATAGS
-
-config S3C_GPIO_SPACE
- int "Space between gpio banks"
- default 0
- help
- Add a number of spare GPIO entries between each bank for debugging
- purposes. This allows any problems where an counter overflows from
- one bank to another to be caught, at the expense of using a little
- more memory.
-
-config S3C_GPIO_TRACK
- bool
- help
- Internal configuration option to enable the s3c specific gpio
- chip tracking if the platform requires it.
-
-# ADC driver
-
-config S3C_ADC
- bool "ADC common driver support"
- depends on !ARCH_MULTIPLATFORM
- help
- Core support for the ADC block found in the Samsung SoC systems
- for drivers such as the touchscreen and hwmon to use to share
- this resource.
-
-# device definitions to compile in
-
-config S3C_DEV_HSMMC
- bool
- help
- Compile in platform device definitions for HSMMC code
-
-config S3C_DEV_HSMMC1
- bool
- help
- Compile in platform device definitions for HSMMC channel 1
-
-config S3C_DEV_HSMMC2
- bool
- help
- Compile in platform device definitions for HSMMC channel 2
-
-config S3C_DEV_HSMMC3
- bool
- help
- Compile in platform device definitions for HSMMC channel 3
-
-config S3C_DEV_HWMON
- bool
- help
- Compile in platform device definitions for HWMON
-
-config S3C_DEV_I2C1
- bool
- help
- Compile in platform device definitions for I2C channel 1
-
-config S3C_DEV_I2C2
- bool
- help
- Compile in platform device definitions for I2C channel 2
-
-config S3C_DEV_I2C3
- bool
- help
- Compile in platform device definition for I2C controller 3
-
-config S3C_DEV_I2C4
- bool
- help
- Compile in platform device definition for I2C controller 4
-
-config S3C_DEV_I2C5
- bool
- help
- Compile in platform device definition for I2C controller 5
-
-config S3C_DEV_I2C6
- bool
- help
- Compile in platform device definition for I2C controller 6
-
-config S3C_DEV_I2C7
- bool
- help
- Compile in platform device definition for I2C controller 7
-
-config S3C_DEV_FB
- bool
- help
- Compile in platform device definition for framebuffer
-
-config S3C_DEV_USB_HOST
- bool
- help
- Compile in platform device definition for USB host.
-
-config S3C_DEV_USB_HSOTG
- bool
- help
- Compile in platform device definition for USB high-speed OtG
-
-config S3C_DEV_WDT
- bool
- default y if ARCH_S3C24XX
- help
- Compile in platform device definition for Watchdog Timer
-
-config S3C_DEV_NAND
- bool
- help
- Compile in platform device definition for NAND controller
-
-config S3C_DEV_ONENAND
- bool
- help
- Compile in platform device definition for OneNAND controller
-
-config S3C_DEV_RTC
- bool
- help
- Compile in platform device definition for RTC
-
-config SAMSUNG_DEV_ADC
- bool
- help
- Compile in platform device definition for ADC controller
-
-config SAMSUNG_DEV_IDE
- bool
- help
- Compile in platform device definitions for IDE
-
-config S3C64XX_DEV_SPI0
- bool
- help
- Compile in platform device definitions for S3C64XX's type
- SPI controller 0
-
-config S3C64XX_DEV_SPI1
- bool
- help
- Compile in platform device definitions for S3C64XX's type
- SPI controller 1
-
-config S3C64XX_DEV_SPI2
- bool
- help
- Compile in platform device definitions for S3C64XX's type
- SPI controller 2
-
-config SAMSUNG_DEV_TS
- bool
- help
- Common in platform device definitions for touchscreen device
-
-config SAMSUNG_DEV_KEYPAD
- bool
- help
- Compile in platform device definitions for keypad
-
-config SAMSUNG_DEV_PWM
- bool
- default y if ARCH_S3C24XX
- help
- Compile in platform device definition for PWM Timer
-
-config S3C24XX_PWM
- bool "PWM device support"
- select PWM
- select PWM_SAMSUNG
- help
- Support for exporting the PWM timer blocks via the pwm device
- system
-
-config GPIO_SAMSUNG
- def_bool y
-
-config SAMSUNG_PM_GPIO
- bool
- default y if GPIO_SAMSUNG && PM
- help
- Include legacy GPIO power management code for platforms not using
- pinctrl-samsung driver.
-endif
-
-config SAMSUNG_WAKEMASK
- bool
- depends on PM
- help
- Compile support for wakeup-mask controls found on the S3C6400
- and above. This code allows a set of interrupt to wakeup-mask
- mappings. See <plat/wakeup-mask.h>
-
-endmenu
-endif
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright 2009 Simtec Electronics
-
-ccflags-$(CONFIG_ARCH_S3C64XX) := -I$(srctree)/arch/arm/mach-s3c64xx/include
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include
-
-# Objects we always build independent of SoC choice
-
-obj-y += init.o cpu.o
-
-# ADC
-
-obj-$(CONFIG_S3C_ADC) += adc.o
-
-# devices
-
-obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o
-
-obj-$(CONFIG_SAMSUNG_ATAGS) += devs.o
-obj-$(CONFIG_SAMSUNG_ATAGS) += dev-uart.o
-
-obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o
-
-# PM support
-
-obj-$(CONFIG_SAMSUNG_PM) += pm.o pm-common.o
-obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
-
-obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-1.0+
-//
-// Copyright (c) 2008 Simtec Electronics
-// http://armlinux.simtec.co.uk/
-// Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
-//
-// Samsung ADC device core
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/regulator/consumer.h>
-
-#include <plat/regs-adc.h>
-#include <linux/soc/samsung/s3c-adc.h>
-
-/* This driver is designed to control the usage of the ADC block between
- * the touchscreen and any other drivers that may need to use it, such as
- * the hwmon driver.
- *
- * Priority will be given to the touchscreen driver, but as this itself is
- * rate limited it should not starve other requests which are processed in
- * order that they are received.
- *
- * Each user registers to get a client block which uniquely identifies it
- * and stores information such as the necessary functions to callback when
- * action is required.
- */
-
-enum s3c_cpu_type {
- TYPE_ADCV1, /* S3C24XX */
- TYPE_ADCV11, /* S3C2443 */
- TYPE_ADCV12, /* S3C2416, S3C2450 */
- TYPE_ADCV2, /* S3C64XX */
- TYPE_ADCV3, /* S5PV210, S5PC110, Exynos4210 */
-};
-
-struct s3c_adc_client {
- struct platform_device *pdev;
- struct list_head pend;
- wait_queue_head_t *wait;
-
- unsigned int nr_samples;
- int result;
- unsigned char is_ts;
- unsigned char channel;
-
- void (*select_cb)(struct s3c_adc_client *c, unsigned selected);
- void (*convert_cb)(struct s3c_adc_client *c,
- unsigned val1, unsigned val2,
- unsigned *samples_left);
-};
-
-struct adc_device {
- struct platform_device *pdev;
- struct platform_device *owner;
- struct clk *clk;
- struct s3c_adc_client *cur;
- struct s3c_adc_client *ts_pend;
- void __iomem *regs;
- spinlock_t lock;
-
- unsigned int prescale;
-
- int irq;
- struct regulator *vdd;
-};
-
-static struct adc_device *adc_dev;
-
-static LIST_HEAD(adc_pending); /* protected by adc_device.lock */
-
-#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
-
-static inline void s3c_adc_convert(struct adc_device *adc)
-{
- unsigned con = readl(adc->regs + S3C2410_ADCCON);
-
- con |= S3C2410_ADCCON_ENABLE_START;
- writel(con, adc->regs + S3C2410_ADCCON);
-}
-
-static inline void s3c_adc_select(struct adc_device *adc,
- struct s3c_adc_client *client)
-{
- unsigned con = readl(adc->regs + S3C2410_ADCCON);
- enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
-
- client->select_cb(client, 1);
-
- if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV2)
- con &= ~S3C2410_ADCCON_MUXMASK;
- con &= ~S3C2410_ADCCON_STDBM;
- con &= ~S3C2410_ADCCON_STARTMASK;
-
- if (!client->is_ts) {
- if (cpu == TYPE_ADCV3)
- writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
- else if (cpu == TYPE_ADCV11 || cpu == TYPE_ADCV12)
- writel(client->channel & 0xf,
- adc->regs + S3C2443_ADCMUX);
- else
- con |= S3C2410_ADCCON_SELMUX(client->channel);
- }
-
- writel(con, adc->regs + S3C2410_ADCCON);
-}
-
-static void s3c_adc_dbgshow(struct adc_device *adc)
-{
- adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
- readl(adc->regs + S3C2410_ADCCON),
- readl(adc->regs + S3C2410_ADCTSC),
- readl(adc->regs + S3C2410_ADCDLY));
-}
-
-static void s3c_adc_try(struct adc_device *adc)
-{
- struct s3c_adc_client *next = adc->ts_pend;
-
- if (!next && !list_empty(&adc_pending)) {
- next = list_first_entry(&adc_pending,
- struct s3c_adc_client, pend);
- list_del(&next->pend);
- } else
- adc->ts_pend = NULL;
-
- if (next) {
- adc_dbg(adc, "new client is %p\n", next);
- adc->cur = next;
- s3c_adc_select(adc, next);
- s3c_adc_convert(adc);
- s3c_adc_dbgshow(adc);
- }
-}
-
-int s3c_adc_start(struct s3c_adc_client *client,
- unsigned int channel, unsigned int nr_samples)
-{
- struct adc_device *adc = adc_dev;
- unsigned long flags;
-
- if (!adc) {
- printk(KERN_ERR "%s: failed to find adc\n", __func__);
- return -EINVAL;
- }
-
- spin_lock_irqsave(&adc->lock, flags);
-
- if (client->is_ts && adc->ts_pend) {
- spin_unlock_irqrestore(&adc->lock, flags);
- return -EAGAIN;
- }
-
- client->channel = channel;
- client->nr_samples = nr_samples;
-
- if (client->is_ts)
- adc->ts_pend = client;
- else
- list_add_tail(&client->pend, &adc_pending);
-
- if (!adc->cur)
- s3c_adc_try(adc);
-
- spin_unlock_irqrestore(&adc->lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_start);
-
-static void s3c_convert_done(struct s3c_adc_client *client,
- unsigned v, unsigned u, unsigned *left)
-{
- client->result = v;
- wake_up(client->wait);
-}
-
-int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
-{
- DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
- int ret;
-
- client->convert_cb = s3c_convert_done;
- client->wait = &wake;
- client->result = -1;
-
- ret = s3c_adc_start(client, ch, 1);
- if (ret < 0)
- goto err;
-
- ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
- if (client->result < 0) {
- ret = -ETIMEDOUT;
- goto err;
- }
-
- client->convert_cb = NULL;
- return client->result;
-
-err:
- return ret;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_read);
-
-static void s3c_adc_default_select(struct s3c_adc_client *client,
- unsigned select)
-{
-}
-
-struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
- void (*select)(struct s3c_adc_client *client,
- unsigned int selected),
- void (*conv)(struct s3c_adc_client *client,
- unsigned d0, unsigned d1,
- unsigned *samples_left),
- unsigned int is_ts)
-{
- struct s3c_adc_client *client;
-
- WARN_ON(!pdev);
-
- if (!select)
- select = s3c_adc_default_select;
-
- if (!pdev)
- return ERR_PTR(-EINVAL);
-
- client = kzalloc(sizeof(*client), GFP_KERNEL);
- if (!client)
- return ERR_PTR(-ENOMEM);
-
- client->pdev = pdev;
- client->is_ts = is_ts;
- client->select_cb = select;
- client->convert_cb = conv;
-
- return client;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_register);
-
-void s3c_adc_release(struct s3c_adc_client *client)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&adc_dev->lock, flags);
-
- /* We should really check that nothing is in progress. */
- if (adc_dev->cur == client)
- adc_dev->cur = NULL;
- if (adc_dev->ts_pend == client)
- adc_dev->ts_pend = NULL;
- else {
- struct list_head *p, *n;
- struct s3c_adc_client *tmp;
-
- list_for_each_safe(p, n, &adc_pending) {
- tmp = list_entry(p, struct s3c_adc_client, pend);
- if (tmp == client)
- list_del(&tmp->pend);
- }
- }
-
- if (adc_dev->cur == NULL)
- s3c_adc_try(adc_dev);
-
- spin_unlock_irqrestore(&adc_dev->lock, flags);
- kfree(client);
-}
-EXPORT_SYMBOL_GPL(s3c_adc_release);
-
-static irqreturn_t s3c_adc_irq(int irq, void *pw)
-{
- struct adc_device *adc = pw;
- struct s3c_adc_client *client = adc->cur;
- enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
- unsigned data0, data1;
-
- if (!client) {
- dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
- goto exit;
- }
-
- data0 = readl(adc->regs + S3C2410_ADCDAT0);
- data1 = readl(adc->regs + S3C2410_ADCDAT1);
- adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
-
- client->nr_samples--;
-
- if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV11) {
- data0 &= 0x3ff;
- data1 &= 0x3ff;
- } else {
- /* S3C2416/S3C64XX/S5P ADC resolution is 12-bit */
- data0 &= 0xfff;
- data1 &= 0xfff;
- }
-
- if (client->convert_cb)
- (client->convert_cb)(client, data0, data1, &client->nr_samples);
-
- if (client->nr_samples > 0) {
- /* fire another conversion for this */
-
- client->select_cb(client, 1);
- s3c_adc_convert(adc);
- } else {
- spin_lock(&adc->lock);
- (client->select_cb)(client, 0);
- adc->cur = NULL;
-
- s3c_adc_try(adc);
- spin_unlock(&adc->lock);
- }
-
-exit:
- if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3) {
- /* Clear ADC interrupt */
- writel(0, adc->regs + S3C64XX_ADCCLRINT);
- }
- return IRQ_HANDLED;
-}
-
-static int s3c_adc_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct adc_device *adc;
- enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
- int ret;
- unsigned tmp;
-
- adc = devm_kzalloc(dev, sizeof(*adc), GFP_KERNEL);
- if (!adc)
- return -ENOMEM;
-
- spin_lock_init(&adc->lock);
-
- adc->pdev = pdev;
- adc->prescale = S3C2410_ADCCON_PRSCVL(49);
-
- adc->vdd = devm_regulator_get(dev, "vdd");
- if (IS_ERR(adc->vdd)) {
- dev_err(dev, "operating without regulator \"vdd\" .\n");
- return PTR_ERR(adc->vdd);
- }
-
- adc->irq = platform_get_irq(pdev, 1);
- if (adc->irq <= 0)
- return -ENOENT;
-
- ret = devm_request_irq(dev, adc->irq, s3c_adc_irq, 0, dev_name(dev),
- adc);
- if (ret < 0) {
- dev_err(dev, "failed to attach adc irq\n");
- return ret;
- }
-
- adc->clk = devm_clk_get(dev, "adc");
- if (IS_ERR(adc->clk)) {
- dev_err(dev, "failed to get adc clock\n");
- return PTR_ERR(adc->clk);
- }
-
- adc->regs = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(adc->regs))
- return PTR_ERR(adc->regs);
-
- ret = regulator_enable(adc->vdd);
- if (ret)
- return ret;
-
- clk_prepare_enable(adc->clk);
-
- tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
-
- /* Enable 12-bit ADC resolution */
- if (cpu == TYPE_ADCV12)
- tmp |= S3C2416_ADCCON_RESSEL;
- if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
- tmp |= S3C64XX_ADCCON_RESSEL;
-
- writel(tmp, adc->regs + S3C2410_ADCCON);
-
- dev_info(dev, "attached adc driver\n");
-
- platform_set_drvdata(pdev, adc);
- adc_dev = adc;
-
- return 0;
-}
-
-static int s3c_adc_remove(struct platform_device *pdev)
-{
- struct adc_device *adc = platform_get_drvdata(pdev);
-
- clk_disable_unprepare(adc->clk);
- regulator_disable(adc->vdd);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int s3c_adc_suspend(struct device *dev)
-{
- struct adc_device *adc = dev_get_drvdata(dev);
- unsigned long flags;
- u32 con;
-
- spin_lock_irqsave(&adc->lock, flags);
-
- con = readl(adc->regs + S3C2410_ADCCON);
- con |= S3C2410_ADCCON_STDBM;
- writel(con, adc->regs + S3C2410_ADCCON);
-
- disable_irq(adc->irq);
- spin_unlock_irqrestore(&adc->lock, flags);
- clk_disable(adc->clk);
- regulator_disable(adc->vdd);
-
- return 0;
-}
-
-static int s3c_adc_resume(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct adc_device *adc = platform_get_drvdata(pdev);
- enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
- int ret;
- unsigned long tmp;
-
- ret = regulator_enable(adc->vdd);
- if (ret)
- return ret;
- clk_enable(adc->clk);
- enable_irq(adc->irq);
-
- tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
-
- /* Enable 12-bit ADC resolution */
- if (cpu == TYPE_ADCV12)
- tmp |= S3C2416_ADCCON_RESSEL;
- if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
- tmp |= S3C64XX_ADCCON_RESSEL;
-
- writel(tmp, adc->regs + S3C2410_ADCCON);
-
- return 0;
-}
-
-#else
-#define s3c_adc_suspend NULL
-#define s3c_adc_resume NULL
-#endif
-
-static const struct platform_device_id s3c_adc_driver_ids[] = {
- {
- .name = "s3c24xx-adc",
- .driver_data = TYPE_ADCV1,
- }, {
- .name = "s3c2443-adc",
- .driver_data = TYPE_ADCV11,
- }, {
- .name = "s3c2416-adc",
- .driver_data = TYPE_ADCV12,
- }, {
- .name = "s3c64xx-adc",
- .driver_data = TYPE_ADCV2,
- }, {
- .name = "samsung-adc-v3",
- .driver_data = TYPE_ADCV3,
- },
- { }
-};
-MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
-
-static const struct dev_pm_ops adc_pm_ops = {
- .suspend = s3c_adc_suspend,
- .resume = s3c_adc_resume,
-};
-
-static struct platform_driver s3c_adc_driver = {
- .id_table = s3c_adc_driver_ids,
- .driver = {
- .name = "s3c-adc",
- .pm = &adc_pm_ops,
- },
- .probe = s3c_adc_probe,
- .remove = s3c_adc_remove,
-};
-
-static int __init adc_init(void)
-{
- int ret;
-
- ret = platform_driver_register(&s3c_adc_driver);
- if (ret)
- printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
-
- return ret;
-}
-
-module_init(adc_init);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
-// http://www.samsung.com
-//
-// Samsung CPU Support
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <plat/map-base.h>
-#include <plat/cpu.h>
-
-unsigned long samsung_cpu_id;
-
-void __init s3c64xx_init_cpu(void)
-{
- samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0x118);
- if (!samsung_cpu_id) {
- /*
- * S3C6400 has the ID register in a different place,
- * and needs a write before it can be read.
- */
- writel_relaxed(0x0, S3C_VA_SYS + 0xA1C);
- samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0xA1C);
- }
-
- pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// originally from arch/arm/plat-s3c24xx/devs.c
-//
-// Copyright (c) 2004 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Base S3C24XX platform device definitions
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/devs.h>
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
- .id = 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
- .id = 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
- .id = 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
- .id = 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
- &s3c24xx_uart_device0,
- &s3c24xx_uart_device1,
- &s3c24xx_uart_device2,
- &s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2011 Samsung Electronics Co., Ltd.
-// http://www.samsung.com
-//
-// Base Samsung platform device definitions
-
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-#include <linux/fb.h>
-#include <linux/gfp.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mmc/host.h>
-#include <linux/ioport.h>
-#include <linux/sizes.h>
-#include <linux/platform_data/s3c-hsudc.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/dma-s3c24xx.h>
-
-#include <linux/platform_data/media/s5p_hdmi.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/gpio-samsung.h>
-
-#ifdef CONFIG_PLAT_S3C24XX
-#include <mach/regs-s3c2443-clock.h>
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <linux/soc/samsung/s3c-adc.h>
-#include <linux/platform_data/ata-samsung_cf.h>
-#include <plat/fb.h>
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/hwmon-s3c.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/keypad.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/pwm-core.h>
-#include <plat/sdhci.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <plat/usb-phy.h>
-#include <linux/platform_data/asoc-s3c.h>
-#include <linux/platform_data/spi-s3c64xx.h>
-
-#define samsung_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
-
-/* AC97 */
-#ifdef CONFIG_CPU_S3C2440
-static struct resource s3c_ac97_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97),
- [1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
-};
-
-struct platform_device s3c_device_ac97 = {
- .name = "samsung-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_ac97_resource),
- .resource = s3c_ac97_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
-/* ADC */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_adc_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
- [1] = DEFINE_RES_IRQ(IRQ_TC),
- [2] = DEFINE_RES_IRQ(IRQ_ADC),
-};
-
-struct platform_device s3c_device_adc = {
- .name = "s3c24xx-adc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_adc_resource),
- .resource = s3c_adc_resource,
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#if defined(CONFIG_SAMSUNG_DEV_ADC)
-static struct resource s3c_adc_resource[] = {
- [0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_ADC),
- [2] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
-struct platform_device s3c_device_adc = {
- .name = "exynos-adc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_adc_resource),
- .resource = s3c_adc_resource,
-};
-#endif /* CONFIG_SAMSUNG_DEV_ADC */
-
-/* Camif Controller */
-
-#ifdef CONFIG_CPU_S3C2440
-static struct resource s3c_camif_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
- [1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C),
- [2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P),
-};
-
-struct platform_device s3c_device_camif = {
- .name = "s3c2440-camif",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_camif_resource),
- .resource = s3c_camif_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
-/* FB */
-
-#ifdef CONFIG_S3C_DEV_FB
-static struct resource s3c_fb_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_FB, SZ_16K),
- [1] = DEFINE_RES_IRQ(IRQ_LCD_VSYNC),
- [2] = DEFINE_RES_IRQ(IRQ_LCD_FIFO),
- [3] = DEFINE_RES_IRQ(IRQ_LCD_SYSTEM),
-};
-
-struct platform_device s3c_device_fb = {
- .name = "s3c-fb",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_fb_resource),
- .resource = s3c_fb_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
-{
- s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
- &s3c_device_fb);
-}
-#endif /* CONFIG_S3C_DEV_FB */
-
-/* HWMON */
-
-#ifdef CONFIG_S3C_DEV_HWMON
-struct platform_device s3c_device_hwmon = {
- .name = "s3c-hwmon",
- .id = -1,
- .dev.parent = &s3c_device_adc.dev,
-};
-
-void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
-{
- s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata),
- &s3c_device_hwmon);
-}
-#endif /* CONFIG_S3C_DEV_HWMON */
-
-/* HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC
-static struct resource s3c_hsmmc_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_HSMMC0, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_HSMMC0),
-};
-
-struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
- .max_width = 4,
- .host_caps = (MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-};
-
-struct platform_device s3c_device_hsmmc0 = {
- .name = "s3c-sdhci",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_hsmmc_resource),
- .resource = s3c_hsmmc_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s3c_hsmmc0_def_platdata,
- },
-};
-
-void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
-{
- s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
-}
-#endif /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
-static struct resource s3c_hsmmc1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_HSMMC1, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_HSMMC1),
-};
-
-struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
- .max_width = 4,
- .host_caps = (MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-};
-
-struct platform_device s3c_device_hsmmc1 = {
- .name = "s3c-sdhci",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c_hsmmc1_resource),
- .resource = s3c_hsmmc1_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s3c_hsmmc1_def_platdata,
- },
-};
-
-void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
-{
- s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
-}
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
-/* HSMMC2 */
-
-#ifdef CONFIG_S3C_DEV_HSMMC2
-static struct resource s3c_hsmmc2_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_HSMMC2, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_HSMMC2),
-};
-
-struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
- .max_width = 4,
- .host_caps = (MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-};
-
-struct platform_device s3c_device_hsmmc2 = {
- .name = "s3c-sdhci",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c_hsmmc2_resource),
- .resource = s3c_hsmmc2_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s3c_hsmmc2_def_platdata,
- },
-};
-
-void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
-{
- s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
-}
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
-
-#ifdef CONFIG_S3C_DEV_HSMMC3
-static struct resource s3c_hsmmc3_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_HSMMC3, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_HSMMC3),
-};
-
-struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
- .max_width = 4,
- .host_caps = (MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-};
-
-struct platform_device s3c_device_hsmmc3 = {
- .name = "s3c-sdhci",
- .id = 3,
- .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource),
- .resource = s3c_hsmmc3_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s3c_hsmmc3_def_platdata,
- },
-};
-
-void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
-{
- s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
-}
-#endif /* CONFIG_S3C_DEV_HSMMC3 */
-
-/* I2C */
-
-static struct resource s3c_i2c0_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC),
-};
-
-struct platform_device s3c_device_i2c0 = {
- .name = "s3c2410-i2c",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_i2c0_resource),
- .resource = s3c_i2c0_resource,
-};
-
-struct s3c2410_platform_i2c default_i2c_data __initdata = {
- .flags = 0,
- .slave_addr = 0x10,
- .frequency = 100*1000,
- .sda_delay = 100,
-};
-
-void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 0;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c0);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c0_cfg_gpio;
-}
-
-#ifdef CONFIG_S3C_DEV_I2C1
-static struct resource s3c_i2c1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC1, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC1),
-};
-
-struct platform_device s3c_device_i2c1 = {
- .name = "s3c2410-i2c",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c_i2c1_resource),
- .resource = s3c_i2c1_resource,
-};
-
-void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 1;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c1);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c1_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C1 */
-
-#ifdef CONFIG_S3C_DEV_I2C2
-static struct resource s3c_i2c2_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC2, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC2),
-};
-
-struct platform_device s3c_device_i2c2 = {
- .name = "s3c2410-i2c",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c_i2c2_resource),
- .resource = s3c_i2c2_resource,
-};
-
-void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 2;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c2);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c2_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C2 */
-
-#ifdef CONFIG_S3C_DEV_I2C3
-static struct resource s3c_i2c3_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC3, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC3),
-};
-
-struct platform_device s3c_device_i2c3 = {
- .name = "s3c2440-i2c",
- .id = 3,
- .num_resources = ARRAY_SIZE(s3c_i2c3_resource),
- .resource = s3c_i2c3_resource,
-};
-
-void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 3;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c3);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c3_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C3 */
-
-#ifdef CONFIG_S3C_DEV_I2C4
-static struct resource s3c_i2c4_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC4, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC4),
-};
-
-struct platform_device s3c_device_i2c4 = {
- .name = "s3c2440-i2c",
- .id = 4,
- .num_resources = ARRAY_SIZE(s3c_i2c4_resource),
- .resource = s3c_i2c4_resource,
-};
-
-void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 4;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c4);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c4_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C4 */
-
-#ifdef CONFIG_S3C_DEV_I2C5
-static struct resource s3c_i2c5_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC5, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC5),
-};
-
-struct platform_device s3c_device_i2c5 = {
- .name = "s3c2440-i2c",
- .id = 5,
- .num_resources = ARRAY_SIZE(s3c_i2c5_resource),
- .resource = s3c_i2c5_resource,
-};
-
-void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 5;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c5);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c5_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C5 */
-
-#ifdef CONFIG_S3C_DEV_I2C6
-static struct resource s3c_i2c6_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC6, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC6),
-};
-
-struct platform_device s3c_device_i2c6 = {
- .name = "s3c2440-i2c",
- .id = 6,
- .num_resources = ARRAY_SIZE(s3c_i2c6_resource),
- .resource = s3c_i2c6_resource,
-};
-
-void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 6;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c6);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c6_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C6 */
-
-#ifdef CONFIG_S3C_DEV_I2C7
-static struct resource s3c_i2c7_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC7, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC7),
-};
-
-struct platform_device s3c_device_i2c7 = {
- .name = "s3c2440-i2c",
- .id = 7,
- .num_resources = ARRAY_SIZE(s3c_i2c7_resource),
- .resource = s3c_i2c7_resource,
-};
-
-void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 7;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c7);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c7_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C7 */
-
-/* I2S */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_iis_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
-};
-
-struct platform_device s3c_device_iis = {
- .name = "s3c24xx-iis",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_iis_resource),
- .resource = s3c_iis_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* IDE CFCON */
-
-#ifdef CONFIG_SAMSUNG_DEV_IDE
-static struct resource s3c_cfcon_resource[] = {
- [0] = DEFINE_RES_MEM(SAMSUNG_PA_CFCON, SZ_16K),
- [1] = DEFINE_RES_IRQ(IRQ_CFCON),
-};
-
-struct platform_device s3c_device_cfcon = {
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_cfcon_resource),
- .resource = s3c_cfcon_resource,
-};
-
-void __init s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
-{
- s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
- &s3c_device_cfcon);
-}
-#endif /* CONFIG_SAMSUNG_DEV_IDE */
-
-/* KEYPAD */
-
-#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
-static struct resource samsung_keypad_resources[] = {
- [0] = DEFINE_RES_MEM(SAMSUNG_PA_KEYPAD, SZ_32),
- [1] = DEFINE_RES_IRQ(IRQ_KEYPAD),
-};
-
-struct platform_device samsung_device_keypad = {
- .name = "samsung-keypad",
- .id = -1,
- .num_resources = ARRAY_SIZE(samsung_keypad_resources),
- .resource = samsung_keypad_resources,
-};
-
-void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
-{
- struct samsung_keypad_platdata *npd;
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &samsung_device_keypad);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = samsung_keypad_cfg_gpio;
-}
-#endif /* CONFIG_SAMSUNG_DEV_KEYPAD */
-
-/* LCD Controller */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_lcd_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_LCD, S3C24XX_SZ_LCD),
- [1] = DEFINE_RES_IRQ(IRQ_LCD),
-};
-
-struct platform_device s3c_device_lcd = {
- .name = "s3c2410-lcd",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_lcd_resource),
- .resource = s3c_lcd_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
-{
- struct s3c2410fb_mach_info *npd;
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
- if (npd) {
- npd->displays = kmemdup(pd->displays,
- sizeof(struct s3c2410fb_display) * npd->num_displays,
- GFP_KERNEL);
- if (!npd->displays)
- printk(KERN_ERR "no memory for LCD display data\n");
- } else {
- printk(KERN_ERR "no memory for LCD platform data\n");
- }
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* NAND */
-
-#ifdef CONFIG_S3C_DEV_NAND
-static struct resource s3c_nand_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_NAND, SZ_1M),
-};
-
-struct platform_device s3c_device_nand = {
- .name = "s3c2410-nand",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_nand_resource),
- .resource = s3c_nand_resource,
-};
-
-/*
- * s3c_nand_copy_set() - copy nand set data
- * @set: The new structure, directly copied from the old.
- *
- * Copy all the fields from the NAND set field from what is probably __initdata
- * to new kernel memory. The code returns 0 if the copy happened correctly or
- * an error code for the calling function to display.
- *
- * Note, we currently do not try and look to see if we've already copied the
- * data in a previous set.
- */
-static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
-{
- void *ptr;
- int size;
-
- size = sizeof(struct mtd_partition) * set->nr_partitions;
- if (size) {
- ptr = kmemdup(set->partitions, size, GFP_KERNEL);
- set->partitions = ptr;
-
- if (!ptr)
- return -ENOMEM;
- }
-
- if (set->nr_map && set->nr_chips) {
- size = sizeof(int) * set->nr_chips;
- ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
- set->nr_map = ptr;
-
- if (!ptr)
- return -ENOMEM;
- }
-
- return 0;
-}
-
-void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
-{
- struct s3c2410_platform_nand *npd;
- int size;
- int ret;
-
- /* note, if we get a failure in allocation, we simply drop out of the
- * function. If there is so little memory available at initialisation
- * time then there is little chance the system is going to run.
- */
-
- npd = s3c_set_platdata(nand, sizeof(*npd), &s3c_device_nand);
- if (!npd)
- return;
-
- /* now see if we need to copy any of the nand set data */
-
- size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
- if (size) {
- struct s3c2410_nand_set *from = npd->sets;
- struct s3c2410_nand_set *to;
- int i;
-
- to = kmemdup(from, size, GFP_KERNEL);
- npd->sets = to; /* set, even if we failed */
-
- if (!to) {
- printk(KERN_ERR "%s: no memory for sets\n", __func__);
- return;
- }
-
- for (i = 0; i < npd->nr_sets; i++) {
- ret = s3c_nand_copy_set(to);
- if (ret) {
- printk(KERN_ERR "%s: failed to copy set %d\n",
- __func__, i);
- return;
- }
- to++;
- }
- }
-}
-#endif /* CONFIG_S3C_DEV_NAND */
-
-/* ONENAND */
-
-#ifdef CONFIG_S3C_DEV_ONENAND
-static struct resource s3c_onenand_resources[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_ONENAND, SZ_1K),
- [1] = DEFINE_RES_MEM(S3C_PA_ONENAND_BUF, S3C_SZ_ONENAND_BUF),
- [2] = DEFINE_RES_IRQ(IRQ_ONENAND),
-};
-
-struct platform_device s3c_device_onenand = {
- .name = "samsung-onenand",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_onenand_resources),
- .resource = s3c_onenand_resources,
-};
-#endif /* CONFIG_S3C_DEV_ONENAND */
-
-#ifdef CONFIG_S3C64XX_DEV_ONENAND1
-static struct resource s3c64xx_onenand1_resources[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1, SZ_1K),
- [1] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1_BUF, S3C64XX_SZ_ONENAND1_BUF),
- [2] = DEFINE_RES_IRQ(IRQ_ONENAND1),
-};
-
-struct platform_device s3c64xx_device_onenand1 = {
- .name = "samsung-onenand",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_onenand1_resources),
- .resource = s3c64xx_onenand1_resources,
-};
-
-void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
-{
- s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
- &s3c64xx_device_onenand1);
-}
-#endif /* CONFIG_S3C64XX_DEV_ONENAND1 */
-
-/* PWM Timer */
-
-#ifdef CONFIG_SAMSUNG_DEV_PWM
-static struct resource samsung_pwm_resource[] = {
- DEFINE_RES_MEM(SAMSUNG_PA_TIMER, SZ_4K),
-};
-
-struct platform_device samsung_device_pwm = {
- .name = "samsung-pwm",
- .id = -1,
- .num_resources = ARRAY_SIZE(samsung_pwm_resource),
- .resource = samsung_pwm_resource,
-};
-
-void __init samsung_pwm_set_platdata(struct samsung_pwm_variant *pd)
-{
- samsung_device_pwm.dev.platform_data = pd;
-}
-#endif /* CONFIG_SAMSUNG_DEV_PWM */
-
-/* RTC */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_rtc_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_RTC, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_RTC),
- [2] = DEFINE_RES_IRQ(IRQ_TICK),
-};
-
-struct platform_device s3c_device_rtc = {
- .name = "s3c2410-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_rtc_resource),
- .resource = s3c_rtc_resource,
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#ifdef CONFIG_S3C_DEV_RTC
-static struct resource s3c_rtc_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_RTC, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_RTC_ALARM),
- [2] = DEFINE_RES_IRQ(IRQ_RTC_TIC),
-};
-
-struct platform_device s3c_device_rtc = {
- .name = "s3c64xx-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_rtc_resource),
- .resource = s3c_rtc_resource,
-};
-#endif /* CONFIG_S3C_DEV_RTC */
-
-/* SDI */
-
-#ifdef CONFIG_PLAT_S3C24XX
-void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd)
-{
- switch (power_mode) {
- case MMC_POWER_ON:
- case MMC_POWER_UP:
- /* Configure GPE5...GPE10 pins in SD mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
- break;
-
- case MMC_POWER_OFF:
- default:
- gpio_direction_output(S3C2410_GPE(5), 0);
- break;
- }
-}
-
-static struct resource s3c_sdi_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
- [1] = DEFINE_RES_IRQ(IRQ_SDI),
-};
-
-static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
- /* This is currently here to avoid a number of if (host->pdata)
- * checks. Any zero fields to ensure reasonable defaults are picked. */
- .no_wprotect = 1,
- .no_detect = 1,
- .set_power = s3c24xx_mci_def_set_power,
-};
-
-struct platform_device s3c_device_sdi = {
- .name = "s3c2410-sdi",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_sdi_resource),
- .resource = s3c_sdi_resource,
- .dev.platform_data = &s3cmci_def_pdata,
-};
-
-void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
-{
- s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
- &s3c_device_sdi);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* SPI */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_spi0_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_SPI, SZ_32),
- [1] = DEFINE_RES_IRQ(IRQ_SPI0),
-};
-
-struct platform_device s3c_device_spi0 = {
- .name = "s3c2410-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_spi0_resource),
- .resource = s3c_spi0_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-static struct resource s3c_spi1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_SPI1, SZ_32),
- [1] = DEFINE_RES_IRQ(IRQ_SPI1),
-};
-
-struct platform_device s3c_device_spi1 = {
- .name = "s3c2410-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c_spi1_resource),
- .resource = s3c_spi1_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* Touchscreen */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_ts_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
- [1] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
-struct platform_device s3c_device_ts = {
- .name = "s3c2410-ts",
- .id = -1,
- .dev.parent = &s3c_device_adc.dev,
- .num_resources = ARRAY_SIZE(s3c_ts_resource),
- .resource = s3c_ts_resource,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
-{
- s3c_set_platdata(hard_s3c2410ts_info,
- sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#ifdef CONFIG_SAMSUNG_DEV_TS
-static struct s3c2410_ts_mach_info default_ts_data __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
-void __init s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
-{
- if (!pd)
- pd = &default_ts_data;
-
- s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
- &s3c_device_adc);
-}
-#endif /* CONFIG_SAMSUNG_DEV_TS */
-
-/* USB */
-
-#ifdef CONFIG_S3C_DEV_USB_HOST
-static struct resource s3c_usb_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_USBHOST, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_USBH),
-};
-
-struct platform_device s3c_device_ohci = {
- .name = "s3c2410-ohci",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_usb_resource),
- .resource = s3c_usb_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-/*
- * s3c_ohci_set_platdata - initialise OHCI device platform data
- * @info: The platform data.
- *
- * This call copies the @info passed in and sets the device .platform_data
- * field to that copy. The @info is copied so that the original can be marked
- * __initdata.
- */
-
-void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
-{
- s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info),
- &s3c_device_ohci);
-}
-#endif /* CONFIG_S3C_DEV_USB_HOST */
-
-/* USB Device (Gadget) */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_usbgadget_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_USBDEV, S3C24XX_SZ_USBDEV),
- [1] = DEFINE_RES_IRQ(IRQ_USBD),
-};
-
-struct platform_device s3c_device_usbgadget = {
- .name = "s3c2410-usbgadget",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_usbgadget_resource),
- .resource = s3c_usbgadget_resource,
-};
-
-void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
-{
- s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* USB HSOTG */
-
-#ifdef CONFIG_S3C_DEV_USB_HSOTG
-static struct resource s3c_usb_hsotg_resources[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
- [1] = DEFINE_RES_IRQ(IRQ_OTG),
-};
-
-struct platform_device s3c_device_usb_hsotg = {
- .name = "s3c-hsotg",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources),
- .resource = s3c_usb_hsotg_resources,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd)
-{
- struct dwc2_hsotg_plat *npd;
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_usb_hsotg);
-
- if (!npd->phy_init)
- npd->phy_init = s3c_usb_phy_init;
- if (!npd->phy_exit)
- npd->phy_exit = s3c_usb_phy_exit;
-}
-#endif /* CONFIG_S3C_DEV_USB_HSOTG */
-
-/* USB High Spped 2.0 Device (Gadget) */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_hsudc_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2416_PA_HSUDC, S3C2416_SZ_HSUDC),
- [1] = DEFINE_RES_IRQ(IRQ_USBD),
-};
-
-struct platform_device s3c_device_usb_hsudc = {
- .name = "s3c-hsudc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_hsudc_resource),
- .resource = s3c_hsudc_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
-{
- s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
- pd->phy_init = s3c_hsudc_init_phy;
- pd->phy_uninit = s3c_hsudc_uninit_phy;
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* WDT */
-
-#ifdef CONFIG_S3C_DEV_WDT
-static struct resource s3c_wdt_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_WDT, SZ_1K),
- [1] = DEFINE_RES_IRQ(IRQ_WDT),
-};
-
-struct platform_device s3c_device_wdt = {
- .name = "s3c2410-wdt",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_wdt_resource),
- .resource = s3c_wdt_resource,
-};
-#endif /* CONFIG_S3C_DEV_WDT */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-static struct resource s3c64xx_spi0_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_SPI0),
-};
-
-struct platform_device s3c64xx_device_spi0 = {
- .name = "s3c6410-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource),
- .resource = s3c64xx_spi0_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs)
-{
- struct s3c64xx_spi_info pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0) {
- pr_err("%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- pd.num_cs = num_cs;
- pd.src_clk_nr = src_clk_nr;
- pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
-
- s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI0 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-static struct resource s3c64xx_spi1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_SPI1),
-};
-
-struct platform_device s3c64xx_device_spi1 = {
- .name = "s3c6410-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource),
- .resource = s3c64xx_spi1_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs)
-{
- struct s3c64xx_spi_info pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0) {
- pr_err("%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- pd.num_cs = num_cs;
- pd.src_clk_nr = src_clk_nr;
- pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
-
- s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI1 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-static struct resource s3c64xx_spi2_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_SPI2),
-};
-
-struct platform_device s3c64xx_device_spi2 = {
- .name = "s3c6410-spi",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c64xx_spi2_resource),
- .resource = s3c64xx_spi2_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs)
-{
- struct s3c64xx_spi_info pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0) {
- pr_err("%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- pd.num_cs = num_cs;
- pd.src_clk_nr = src_clk_nr;
- pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
-
- s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI2 */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
-// http://www.samsung.com/
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// Samsung - GPIOlib support
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/ioport.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/of_address.h>
-
-#include <asm/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/pm.h>
-
-int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull)
-{
- void __iomem *reg = chip->base + 0x08;
- int shift = off * 2;
- u32 pup;
-
- pup = __raw_readl(reg);
- pup &= ~(3 << shift);
- pup |= pull << shift;
- __raw_writel(pup, reg);
-
- return 0;
-}
-
-samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- void __iomem *reg = chip->base + 0x08;
- int shift = off * 2;
- u32 pup = __raw_readl(reg);
-
- pup >>= shift;
- pup &= 0x3;
-
- return (__force samsung_gpio_pull_t)pup;
-}
-
-int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull)
-{
- switch (pull) {
- case S3C_GPIO_PULL_NONE:
- pull = 0x01;
- break;
- case S3C_GPIO_PULL_UP:
- pull = 0x00;
- break;
- case S3C_GPIO_PULL_DOWN:
- pull = 0x02;
- break;
- }
- return samsung_gpio_setpull_updown(chip, off, pull);
-}
-
-samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- samsung_gpio_pull_t pull;
-
- pull = samsung_gpio_getpull_updown(chip, off);
-
- switch (pull) {
- case 0x00:
- pull = S3C_GPIO_PULL_UP;
- break;
- case 0x01:
- case 0x03:
- pull = S3C_GPIO_PULL_NONE;
- break;
- case 0x02:
- pull = S3C_GPIO_PULL_DOWN;
- break;
- }
-
- return pull;
-}
-
-static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull,
- samsung_gpio_pull_t updown)
-{
- void __iomem *reg = chip->base + 0x08;
- u32 pup = __raw_readl(reg);
-
- if (pull == updown)
- pup &= ~(1 << off);
- else if (pull == S3C_GPIO_PULL_NONE)
- pup |= (1 << off);
- else
- return -EINVAL;
-
- __raw_writel(pup, reg);
- return 0;
-}
-
-static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
- unsigned int off,
- samsung_gpio_pull_t updown)
-{
- void __iomem *reg = chip->base + 0x08;
- u32 pup = __raw_readl(reg);
-
- pup &= (1 << off);
- return pup ? S3C_GPIO_PULL_NONE : updown;
-}
-
-samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
-}
-
-int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull)
-{
- return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
-}
-
-samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
-}
-
-int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull)
-{
- return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
-}
-
-/*
- * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has two bits of configuration per gpio, which have the following
- * functions:
- * 00 = input
- * 01 = output
- * 1x = special function
- */
-
-static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
- unsigned int off, unsigned int cfg)
-{
- void __iomem *reg = chip->base;
- unsigned int shift = off * 2;
- u32 con;
-
- if (samsung_gpio_is_cfg_special(cfg)) {
- cfg &= 0xf;
- if (cfg > 3)
- return -EINVAL;
-
- cfg <<= shift;
- }
-
- con = __raw_readl(reg);
- con &= ~(0x3 << shift);
- con |= cfg;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-/*
- * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of samsung_gpio_setcfg_2bit(). Will return a value which
- * could be directly passed back to samsung_gpio_setcfg_2bit(), from the
- * S3C_GPIO_SPECIAL() macro.
- */
-
-static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- u32 con;
-
- con = __raw_readl(chip->base);
- con >>= off * 2;
- con &= 3;
-
- /* this conversion works for IN and OUT as well as special mode */
- return S3C_GPIO_SPECIAL(con);
-}
-
-/*
- * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- * 0000 = Input
- * 0001 = Output
- * others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of functions for
- * each case.
- */
-
-static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip,
- unsigned int off, unsigned int cfg)
-{
- void __iomem *reg = chip->base;
- unsigned int shift = (off & 7) * 4;
- u32 con;
-
- if (off < 8 && chip->chip.ngpio > 8)
- reg -= 4;
-
- if (samsung_gpio_is_cfg_special(cfg)) {
- cfg &= 0xf;
- cfg <<= shift;
- }
-
- con = __raw_readl(reg);
- con &= ~(0xf << shift);
- con |= cfg;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-/*
- * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration
- * register setting into a value the software can use, such as could be passed
- * to samsung_gpio_setcfg_4bit().
- *
- * @sa samsung_gpio_getcfg_2bit
- */
-
-static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- void __iomem *reg = chip->base;
- unsigned int shift = (off & 7) * 4;
- u32 con;
-
- if (off < 8 && chip->chip.ngpio > 8)
- reg -= 4;
-
- con = __raw_readl(reg);
- con >>= shift;
- con &= 0xf;
-
- /* this conversion works for IN and OUT as well as special mode */
- return S3C_GPIO_SPECIAL(con);
-}
-
-#ifdef CONFIG_PLAT_S3C24XX
-/*
- * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has one bit of configuration for the gpio, where setting the bit
- * means the pin is in special function mode and unset means output.
- */
-
-static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
- unsigned int off, unsigned int cfg)
-{
- void __iomem *reg = chip->base;
- unsigned int shift = off;
- u32 con;
-
- if (samsung_gpio_is_cfg_special(cfg)) {
- cfg &= 0xf;
-
- /* Map output to 0, and SFN2 to 1 */
- cfg -= 1;
- if (cfg > 1)
- return -EINVAL;
-
- cfg <<= shift;
- }
-
- con = __raw_readl(reg);
- con &= ~(0x1 << shift);
- con |= cfg;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-/*
- * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
- * GPIO configuration value.
- *
- * @sa samsung_gpio_getcfg_2bit
- * @sa samsung_gpio_getcfg_4bit
- */
-
-static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- u32 con;
-
- con = __raw_readl(chip->base);
- con >>= off;
- con &= 1;
- con++;
-
- return S3C_GPIO_SFN(con);
-}
-#endif
-
-static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
- int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chipcfg++) {
- if (!chipcfg->set_config)
- chipcfg->set_config = samsung_gpio_setcfg_4bit;
- if (!chipcfg->get_config)
- chipcfg->get_config = samsung_gpio_getcfg_4bit;
- if (!chipcfg->set_pull)
- chipcfg->set_pull = samsung_gpio_setpull_updown;
- if (!chipcfg->get_pull)
- chipcfg->get_pull = samsung_gpio_getpull_updown;
- }
-}
-
-struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
- .set_config = samsung_gpio_setcfg_2bit,
- .get_config = samsung_gpio_getcfg_2bit,
-};
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
- .set_config = s3c24xx_gpio_setcfg_abank,
- .get_config = s3c24xx_gpio_getcfg_abank,
-};
-#endif
-
-static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
- [0] = {
- .cfg_eint = 0x0,
- },
- [1] = {
- .cfg_eint = 0x3,
- },
- [2] = {
- .cfg_eint = 0x7,
- },
- [3] = {
- .cfg_eint = 0xF,
- },
- [4] = {
- .cfg_eint = 0x0,
- .set_config = samsung_gpio_setcfg_2bit,
- .get_config = samsung_gpio_getcfg_2bit,
- },
- [5] = {
- .cfg_eint = 0x2,
- .set_config = samsung_gpio_setcfg_2bit,
- .get_config = samsung_gpio_getcfg_2bit,
- },
- [6] = {
- .cfg_eint = 0x3,
- .set_config = samsung_gpio_setcfg_2bit,
- .get_config = samsung_gpio_getcfg_2bit,
- },
- [7] = {
- .set_config = samsung_gpio_setcfg_2bit,
- .get_config = samsung_gpio_getcfg_2bit,
- },
-};
-
-/*
- * Default routines for controlling GPIO, based on the original S3C24XX
- * GPIO functions which deal with the case where each gpio bank of the
- * chip is as following:
- *
- * base + 0x00: Control register, 2 bits per gpio
- * gpio n: 2 bits starting at (2*n)
- * 00 = input, 01 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- * bit n: data bit n
-*/
-
-static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset)
-{
- struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long con;
-
- samsung_gpio_lock(ourchip, flags);
-
- con = __raw_readl(base + 0x00);
- con &= ~(3 << (offset * 2));
-
- __raw_writel(con, base + 0x00);
-
- samsung_gpio_unlock(ourchip, flags);
- return 0;
-}
-
-static int samsung_gpiolib_2bit_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
- unsigned long con;
-
- samsung_gpio_lock(ourchip, flags);
-
- dat = __raw_readl(base + 0x04);
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
- __raw_writel(dat, base + 0x04);
-
- con = __raw_readl(base + 0x00);
- con &= ~(3 << (offset * 2));
- con |= 1 << (offset * 2);
-
- __raw_writel(con, base + 0x00);
- __raw_writel(dat, base + 0x04);
-
- samsung_gpio_unlock(ourchip, flags);
- return 0;
-}
-
-/*
- * The samsung_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- * bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the
- * state of the output.
- */
-
-static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
- unsigned int offset)
-{
- struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long con;
-
- con = __raw_readl(base + GPIOCON_OFF);
- if (ourchip->bitmap_gpio_int & BIT(offset))
- con |= 0xf << con_4bit_shift(offset);
- else
- con &= ~(0xf << con_4bit_shift(offset));
- __raw_writel(con, base + GPIOCON_OFF);
-
- pr_debug("%s: %p: CON now %08lx\n", __func__, base, con);
-
- return 0;
-}
-
-static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long con;
- unsigned long dat;
-
- con = __raw_readl(base + GPIOCON_OFF);
- con &= ~(0xf << con_4bit_shift(offset));
- con |= 0x1 << con_4bit_shift(offset);
-
- dat = __raw_readl(base + GPIODAT_OFF);
-
- if (value)
- dat |= 1 << offset;
- else
- dat &= ~(1 << offset);
-
- __raw_writel(dat, base + GPIODAT_OFF);
- __raw_writel(con, base + GPIOCON_OFF);
- __raw_writel(dat, base + GPIODAT_OFF);
-
- pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
- return 0;
-}
-
-/*
- * The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- * bit n: data bit n
- *
- * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set
- * routines we store the 'base + 0x4' address so that these routines see
- * the data register at ourchip->base + 0x04.
- */
-
-static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
- unsigned int offset)
-{
- struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
-
- if (offset > 7)
- offset -= 8;
- else
- regcon -= 4;
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(offset));
- __raw_writel(con, regcon);
-
- pr_debug("%s: %p: CON %08lx\n", __func__, base, con);
-
- return 0;
-}
-
-static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
- unsigned long dat;
- unsigned con_offset = offset;
-
- if (con_offset > 7)
- con_offset -= 8;
- else
- regcon -= 4;
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(con_offset));
- con |= 0x1 << con_4bit_shift(con_offset);
-
- dat = __raw_readl(base + GPIODAT_OFF);
-
- if (value)
- dat |= 1 << offset;
- else
- dat &= ~(1 << offset);
-
- __raw_writel(dat, base + GPIODAT_OFF);
- __raw_writel(con, regcon);
- __raw_writel(dat, base + GPIODAT_OFF);
-
- pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
- return 0;
-}
-
-#ifdef CONFIG_PLAT_S3C24XX
-/* The next set of routines are for the case of s3c24xx bank a */
-
-static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
-{
- return -EINVAL;
-}
-
-static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
- unsigned long con;
-
- local_irq_save(flags);
-
- con = __raw_readl(base + 0x00);
- dat = __raw_readl(base + 0x04);
-
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
-
- __raw_writel(dat, base + 0x04);
-
- con &= ~(1 << offset);
-
- __raw_writel(con, base + 0x00);
- __raw_writel(dat, base + 0x04);
-
- local_irq_restore(flags);
- return 0;
-}
-#endif
-
-static void samsung_gpiolib_set(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
-
- samsung_gpio_lock(ourchip, flags);
-
- dat = __raw_readl(base + 0x04);
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
- __raw_writel(dat, base + 0x04);
-
- samsung_gpio_unlock(ourchip, flags);
-}
-
-static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
- struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
- unsigned long val;
-
- val = __raw_readl(ourchip->base + 0x04);
- val >>= offset;
- val &= 1;
-
- return val;
-}
-
-/*
- * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
- * for use with the configuration calls, and other parts of the s3c gpiolib
- * support code.
- *
- * Not all s3c support code will need this, as some configurations of cpu
- * may only support one or two different configuration options and have an
- * easy gpio to samsung_gpio_chip mapping function. If this is the case, then
- * the machine support file should provide its own samsung_gpiolib_getchip()
- * and any other necessary functions.
- */
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip)
-{
- unsigned int gpn;
- int i;
-
- gpn = chip->chip.base;
- for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
- BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
- s3c_gpios[gpn] = chip;
- }
-}
-#endif /* CONFIG_S3C_GPIO_TRACK */
-
-/*
- * samsung_gpiolib_add() - add the Samsung gpio_chip.
- * @chip: The chip to register
- *
- * This is a wrapper to gpiochip_add() that takes our specific gpio chip
- * information and makes the necessary alterations for the platform and
- * notes the information for use with the configuration systems and any
- * other parts of the system.
- */
-
-static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
-{
- struct gpio_chip *gc = &chip->chip;
- int ret;
-
- BUG_ON(!chip->base);
- BUG_ON(!gc->label);
- BUG_ON(!gc->ngpio);
-
- spin_lock_init(&chip->lock);
-
- if (!gc->direction_input)
- gc->direction_input = samsung_gpiolib_2bit_input;
- if (!gc->direction_output)
- gc->direction_output = samsung_gpiolib_2bit_output;
- if (!gc->set)
- gc->set = samsung_gpiolib_set;
- if (!gc->get)
- gc->get = samsung_gpiolib_get;
-
-#ifdef CONFIG_PM
- if (chip->pm != NULL) {
- if (!chip->pm->save || !chip->pm->resume)
- pr_err("gpio: %s has missing PM functions\n",
- gc->label);
- } else
- pr_err("gpio: %s has no PM function\n", gc->label);
-#endif
-
- /* gpiochip_add() prints own failure message on error. */
- ret = gpiochip_add_data(gc, chip);
- if (ret >= 0)
- s3c_gpiolib_track(chip);
-}
-
-static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
- int nr_chips, void __iomem *base)
-{
- int i;
- struct gpio_chip *gc = &chip->chip;
-
- for (i = 0 ; i < nr_chips; i++, chip++) {
- /* skip banks not present on SoC */
- if (chip->chip.base >= S3C_GPIO_END)
- continue;
-
- if (!chip->config)
- chip->config = &s3c24xx_gpiocfg_default;
- if (!chip->pm)
- chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
- if ((base != NULL) && (chip->base == NULL))
- chip->base = base + ((i) * 0x10);
-
- if (!gc->direction_input)
- gc->direction_input = samsung_gpiolib_2bit_input;
- if (!gc->direction_output)
- gc->direction_output = samsung_gpiolib_2bit_output;
-
- samsung_gpiolib_add(chip);
- }
-}
-
-static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
- int nr_chips, void __iomem *base,
- unsigned int offset)
-{
- int i;
-
- for (i = 0 ; i < nr_chips; i++, chip++) {
- chip->chip.direction_input = samsung_gpiolib_2bit_input;
- chip->chip.direction_output = samsung_gpiolib_2bit_output;
-
- if (!chip->config)
- chip->config = &samsung_gpio_cfgs[7];
- if (!chip->pm)
- chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
- if ((base != NULL) && (chip->base == NULL))
- chip->base = base + ((i) * offset);
-
- samsung_gpiolib_add(chip);
- }
-}
-
-/*
- * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- * 0000 = Input
- * 0001 = Output
- * others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of function
- * (samsung_gpiolib_add_4bit2_chips)for each case.
- */
-
-static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip,
- int nr_chips, void __iomem *base)
-{
- int i;
-
- for (i = 0 ; i < nr_chips; i++, chip++) {
- chip->chip.direction_input = samsung_gpiolib_4bit_input;
- chip->chip.direction_output = samsung_gpiolib_4bit_output;
-
- if (!chip->config)
- chip->config = &samsung_gpio_cfgs[2];
- if (!chip->pm)
- chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
- if ((base != NULL) && (chip->base == NULL))
- chip->base = base + ((i) * 0x20);
-
- chip->bitmap_gpio_int = 0;
-
- samsung_gpiolib_add(chip);
- }
-}
-
-static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip,
- int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chip++) {
- chip->chip.direction_input = samsung_gpiolib_4bit2_input;
- chip->chip.direction_output = samsung_gpiolib_4bit2_output;
-
- if (!chip->config)
- chip->config = &samsung_gpio_cfgs[2];
- if (!chip->pm)
- chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
-
- samsung_gpiolib_add(chip);
- }
-}
-
-int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
- struct samsung_gpio_chip *samsung_chip = gpiochip_get_data(chip);
-
- return samsung_chip->irq_base + offset;
-}
-
-#ifdef CONFIG_PLAT_S3C24XX
-static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- if (offset < 4) {
- if (soc_is_s3c2412())
- return IRQ_EINT0_2412 + offset;
- else
- return IRQ_EINT0 + offset;
- }
-
- if (offset < 8)
- return IRQ_EINT4 + offset - 4;
-
- return -EINVAL;
-}
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
-static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
-{
- return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
-{
- return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-#endif
-
-struct samsung_gpio_chip s3c24xx_gpios[] = {
-#ifdef CONFIG_PLAT_S3C24XX
- {
- .config = &s3c24xx_gpiocfg_banka,
- .chip = {
- .base = S3C2410_GPA(0),
- .owner = THIS_MODULE,
- .label = "GPIOA",
- .ngpio = 27,
- .direction_input = s3c24xx_gpiolib_banka_input,
- .direction_output = s3c24xx_gpiolib_banka_output,
- },
- }, {
- .chip = {
- .base = S3C2410_GPB(0),
- .owner = THIS_MODULE,
- .label = "GPIOB",
- .ngpio = 11,
- },
- }, {
- .chip = {
- .base = S3C2410_GPC(0),
- .owner = THIS_MODULE,
- .label = "GPIOC",
- .ngpio = 16,
- },
- }, {
- .chip = {
- .base = S3C2410_GPD(0),
- .owner = THIS_MODULE,
- .label = "GPIOD",
- .ngpio = 16,
- },
- }, {
- .chip = {
- .base = S3C2410_GPE(0),
- .label = "GPIOE",
- .owner = THIS_MODULE,
- .ngpio = 16,
- },
- }, {
- .chip = {
- .base = S3C2410_GPF(0),
- .owner = THIS_MODULE,
- .label = "GPIOF",
- .ngpio = 8,
- .to_irq = s3c24xx_gpiolib_fbank_to_irq,
- },
- }, {
- .irq_base = IRQ_EINT8,
- .chip = {
- .base = S3C2410_GPG(0),
- .owner = THIS_MODULE,
- .label = "GPIOG",
- .ngpio = 16,
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .chip = {
- .base = S3C2410_GPH(0),
- .owner = THIS_MODULE,
- .label = "GPIOH",
- .ngpio = 15,
- },
- },
- /* GPIOS for the S3C2443 and later devices. */
- {
- .base = S3C2440_GPJCON,
- .chip = {
- .base = S3C2410_GPJ(0),
- .owner = THIS_MODULE,
- .label = "GPIOJ",
- .ngpio = 16,
- },
- }, {
- .base = S3C2443_GPKCON,
- .chip = {
- .base = S3C2410_GPK(0),
- .owner = THIS_MODULE,
- .label = "GPIOK",
- .ngpio = 16,
- },
- }, {
- .base = S3C2443_GPLCON,
- .chip = {
- .base = S3C2410_GPL(0),
- .owner = THIS_MODULE,
- .label = "GPIOL",
- .ngpio = 15,
- },
- }, {
- .base = S3C2443_GPMCON,
- .chip = {
- .base = S3C2410_GPM(0),
- .owner = THIS_MODULE,
- .label = "GPIOM",
- .ngpio = 2,
- },
- },
-#endif
-};
-
-/*
- * GPIO bank summary:
- *
- * Bank GPIOs Style SlpCon ExtInt Group
- * A 8 4Bit Yes 1
- * B 7 4Bit Yes 1
- * C 8 4Bit Yes 2
- * D 5 4Bit Yes 3
- * E 5 4Bit Yes None
- * F 16 2Bit Yes 4 [1]
- * G 7 4Bit Yes 5
- * H 10 4Bit[2] Yes 6
- * I 16 2Bit Yes None
- * J 12 2Bit Yes None
- * K 16 4Bit[2] No None
- * L 15 4Bit[2] No None
- * M 6 4Bit No IRQ_EINT
- * N 16 2Bit No IRQ_EINT
- * O 16 2Bit Yes 7
- * P 15 2Bit Yes 8
- * Q 9 2Bit Yes 9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
-#ifdef CONFIG_ARCH_S3C64XX
- {
- .chip = {
- .base = S3C64XX_GPA(0),
- .ngpio = S3C64XX_GPIO_A_NR,
- .label = "GPA",
- },
- }, {
- .chip = {
- .base = S3C64XX_GPB(0),
- .ngpio = S3C64XX_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .chip = {
- .base = S3C64XX_GPC(0),
- .ngpio = S3C64XX_GPIO_C_NR,
- .label = "GPC",
- },
- }, {
- .chip = {
- .base = S3C64XX_GPD(0),
- .ngpio = S3C64XX_GPIO_D_NR,
- .label = "GPD",
- },
- }, {
- .config = &samsung_gpio_cfgs[0],
- .chip = {
- .base = S3C64XX_GPE(0),
- .ngpio = S3C64XX_GPIO_E_NR,
- .label = "GPE",
- },
- }, {
- .base = S3C64XX_GPG_BASE,
- .chip = {
- .base = S3C64XX_GPG(0),
- .ngpio = S3C64XX_GPIO_G_NR,
- .label = "GPG",
- },
- }, {
- .base = S3C64XX_GPM_BASE,
- .config = &samsung_gpio_cfgs[1],
- .chip = {
- .base = S3C64XX_GPM(0),
- .ngpio = S3C64XX_GPIO_M_NR,
- .label = "GPM",
- .to_irq = s3c64xx_gpiolib_mbank_to_irq,
- },
- },
-#endif
-};
-
-static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
-#ifdef CONFIG_ARCH_S3C64XX
- {
- .base = S3C64XX_GPH_BASE + 0x4,
- .chip = {
- .base = S3C64XX_GPH(0),
- .ngpio = S3C64XX_GPIO_H_NR,
- .label = "GPH",
- },
- }, {
- .base = S3C64XX_GPK_BASE + 0x4,
- .config = &samsung_gpio_cfgs[0],
- .chip = {
- .base = S3C64XX_GPK(0),
- .ngpio = S3C64XX_GPIO_K_NR,
- .label = "GPK",
- },
- }, {
- .base = S3C64XX_GPL_BASE + 0x4,
- .config = &samsung_gpio_cfgs[1],
- .chip = {
- .base = S3C64XX_GPL(0),
- .ngpio = S3C64XX_GPIO_L_NR,
- .label = "GPL",
- .to_irq = s3c64xx_gpiolib_lbank_to_irq,
- },
- },
-#endif
-};
-
-static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
-#ifdef CONFIG_ARCH_S3C64XX
- {
- .base = S3C64XX_GPF_BASE,
- .config = &samsung_gpio_cfgs[6],
- .chip = {
- .base = S3C64XX_GPF(0),
- .ngpio = S3C64XX_GPIO_F_NR,
- .label = "GPF",
- },
- }, {
- .config = &samsung_gpio_cfgs[7],
- .chip = {
- .base = S3C64XX_GPI(0),
- .ngpio = S3C64XX_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .config = &samsung_gpio_cfgs[7],
- .chip = {
- .base = S3C64XX_GPJ(0),
- .ngpio = S3C64XX_GPIO_J_NR,
- .label = "GPJ",
- },
- }, {
- .config = &samsung_gpio_cfgs[6],
- .chip = {
- .base = S3C64XX_GPO(0),
- .ngpio = S3C64XX_GPIO_O_NR,
- .label = "GPO",
- },
- }, {
- .config = &samsung_gpio_cfgs[6],
- .chip = {
- .base = S3C64XX_GPP(0),
- .ngpio = S3C64XX_GPIO_P_NR,
- .label = "GPP",
- },
- }, {
- .config = &samsung_gpio_cfgs[6],
- .chip = {
- .base = S3C64XX_GPQ(0),
- .ngpio = S3C64XX_GPIO_Q_NR,
- .label = "GPQ",
- },
- }, {
- .base = S3C64XX_GPN_BASE,
- .irq_base = IRQ_EINT(0),
- .config = &samsung_gpio_cfgs[5],
- .chip = {
- .base = S3C64XX_GPN(0),
- .ngpio = S3C64XX_GPIO_N_NR,
- .label = "GPN",
- .to_irq = samsung_gpiolib_to_irq,
- },
- },
-#endif
-};
-
-/* TODO: cleanup soc_is_* */
-static __init int samsung_gpiolib_init(void)
-{
- /*
- * Currently there are two drivers that can provide GPIO support for
- * Samsung SoCs. For device tree enabled platforms, the new
- * pinctrl-samsung driver is used, providing both GPIO and pin control
- * interfaces. For legacy (non-DT) platforms this driver is used.
- */
- if (of_have_populated_dt())
- return 0;
-
- if (soc_is_s3c24xx()) {
- samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
- ARRAY_SIZE(samsung_gpio_cfgs));
- s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
- ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
- } else if (soc_is_s3c64xx()) {
- samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
- ARRAY_SIZE(samsung_gpio_cfgs));
- samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
- ARRAY_SIZE(s3c64xx_gpios_2bit),
- S3C64XX_VA_GPIO + 0xE0, 0x20);
- samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit,
- ARRAY_SIZE(s3c64xx_gpios_4bit),
- S3C64XX_VA_GPIO);
- samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
- ARRAY_SIZE(s3c64xx_gpios_4bit2));
- }
-
- return 0;
-}
-core_initcall(samsung_gpiolib_init);
-
-int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
-{
- struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
- unsigned long flags;
- int offset;
- int ret;
-
- if (!chip)
- return -EINVAL;
-
- offset = pin - chip->chip.base;
-
- samsung_gpio_lock(chip, flags);
- ret = samsung_gpio_do_setcfg(chip, offset, config);
- samsung_gpio_unlock(chip, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_cfgpin);
-
-int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
- unsigned int cfg)
-{
- int ret;
-
- for (; nr > 0; nr--, start++) {
- ret = s3c_gpio_cfgpin(start, cfg);
- if (ret != 0)
- return ret;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
-
-int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
- unsigned int cfg, samsung_gpio_pull_t pull)
-{
- int ret;
-
- for (; nr > 0; nr--, start++) {
- s3c_gpio_setpull(start, pull);
- ret = s3c_gpio_cfgpin(start, cfg);
- if (ret != 0)
- return ret;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
-
-unsigned s3c_gpio_getcfg(unsigned int pin)
-{
- struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
- unsigned long flags;
- unsigned ret = 0;
- int offset;
-
- if (chip) {
- offset = pin - chip->chip.base;
-
- samsung_gpio_lock(chip, flags);
- ret = samsung_gpio_do_getcfg(chip, offset);
- samsung_gpio_unlock(chip, flags);
- }
-
- return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_getcfg);
-
-int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
-{
- struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
- unsigned long flags;
- int offset, ret;
-
- if (!chip)
- return -EINVAL;
-
- offset = pin - chip->chip.base;
-
- samsung_gpio_lock(chip, flags);
- ret = samsung_gpio_do_setpull(chip, offset, pull);
- samsung_gpio_unlock(chip, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_setpull);
-
-samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
-{
- struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
- unsigned long flags;
- int offset;
- u32 pup = 0;
-
- if (chip) {
- offset = pin - chip->chip.base;
-
- samsung_gpio_lock(chip, flags);
- pup = samsung_gpio_do_getpull(chip, offset);
- samsung_gpio_unlock(chip, flags);
- }
-
- return (__force samsung_gpio_pull_t)pup;
-}
-EXPORT_SYMBOL(s3c_gpio_getpull);
-
-#ifdef CONFIG_PLAT_S3C24XX
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
- unsigned long flags;
- unsigned long misccr;
-
- local_irq_save(flags);
- misccr = __raw_readl(S3C24XX_MISCCR);
- misccr &= ~clear;
- misccr ^= change;
- __raw_writel(misccr, S3C24XX_MISCCR);
- local_irq_restore(flags);
-
- return misccr;
-}
-EXPORT_SYMBOL(s3c2410_modify_misccr);
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Samsung ADC Controller core functions
- */
-
-#ifndef __ASM_PLAT_ADC_CORE_H
-#define __ASM_PLAT_ADC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_adc_setname(char *name)
-{
-#if defined(CONFIG_SAMSUNG_DEV_ADC) || defined(CONFIG_PLAT_S3C24XX)
- s3c_device_adc.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_ADC_CORE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for Samsung CPU support
- */
-
-/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-
-#ifndef __SAMSUNG_PLAT_CPU_H
-#define __SAMSUNG_PLAT_CPU_H
-
-extern unsigned long samsung_cpu_id;
-
-#define S3C2410_CPU_ID 0x32410000
-#define S3C2410_CPU_MASK 0xFFFFFFFF
-
-#define S3C24XX_CPU_ID 0x32400000
-#define S3C24XX_CPU_MASK 0xFFF00000
-
-#define S3C2412_CPU_ID 0x32412000
-#define S3C2412_CPU_MASK 0xFFFFF000
-
-#define S3C6400_CPU_ID 0x36400000
-#define S3C6410_CPU_ID 0x36410000
-#define S3C64XX_CPU_MASK 0xFFFFF000
-
-#define S5PV210_CPU_ID 0x43110000
-#define S5PV210_CPU_MASK 0xFFFFF000
-
-#define IS_SAMSUNG_CPU(name, id, mask) \
-static inline int is_samsung_##name(void) \
-{ \
- return ((samsung_cpu_id & mask) == (id & mask)); \
-}
-
-IS_SAMSUNG_CPU(s3c2410, S3C2410_CPU_ID, S3C2410_CPU_MASK)
-IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
-IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
-IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
-
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
- defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
- defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
- defined(CONFIG_CPU_S3C2443)
-# define soc_is_s3c24xx() is_samsung_s3c24xx()
-# define soc_is_s3c2410() is_samsung_s3c2410()
-#else
-# define soc_is_s3c24xx() 0
-# define soc_is_s3c2410() 0
-#endif
-
-#if defined(CONFIG_CPU_S3C2412)
-# define soc_is_s3c2412() is_samsung_s3c2412()
-#else
-# define soc_is_s3c2412() 0
-#endif
-
-#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
-# define soc_is_s3c6400() is_samsung_s3c6400()
-# define soc_is_s3c6410() is_samsung_s3c6410()
-# define soc_is_s3c64xx() (is_samsung_s3c6400() || is_samsung_s3c6410())
-#else
-# define soc_is_s3c6400() 0
-# define soc_is_s3c6410() 0
-# define soc_is_s3c64xx() 0
-#endif
-
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
-
-#ifndef KHZ
-#define KHZ (1000)
-#endif
-
-#ifndef MHZ
-#define MHZ (1000*1000)
-#endif
-
-#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000)
-
-/* forward declaration */
-struct s3c24xx_uart_resources;
-struct platform_device;
-struct s3c2410_uartcfg;
-struct map_desc;
-
-/* per-cpu initialisation function table. */
-
-struct cpu_table {
- unsigned long idcode;
- unsigned long idmask;
- void (*map_io)(void);
- void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
- void (*init_clocks)(int xtal);
- int (*init)(void);
- const char *name;
-};
-
-extern void s3c_init_cpu(unsigned long idcode,
- struct cpu_table *cpus, unsigned int cputab_size);
-
-/* core initialisation functions */
-
-extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-
-extern void s3c64xx_init_cpu(void);
-
-extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c24xx_init_clocks(int xtal);
-
-extern void s3c24xx_init_uartdevs(char *name,
- struct s3c24xx_uart_resources *res,
- struct s3c2410_uartcfg *cfg, int no);
-
-extern struct syscore_ops s3c2410_pm_syscore_ops;
-extern struct syscore_ops s3c2412_pm_syscore_ops;
-extern struct syscore_ops s3c2416_pm_syscore_ops;
-extern struct syscore_ops s3c244x_pm_syscore_ops;
-
-extern struct bus_type s3c6410_subsys;
-
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 standard platform devices
- */
-
-#ifndef __PLAT_DEVS_H
-#define __PLAT_DEVS_H __FILE__
-
-#include <linux/platform_device.h>
-
-struct s3c24xx_uart_resources {
- struct resource *resources;
- unsigned long nr_resources;
-};
-
-extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
-extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
-
-extern struct platform_device *s3c24xx_uart_devs[];
-extern struct platform_device *s3c24xx_uart_src[];
-
-extern struct platform_device s3c64xx_device_ac97;
-extern struct platform_device s3c64xx_device_iis0;
-extern struct platform_device s3c64xx_device_iis1;
-extern struct platform_device s3c64xx_device_iisv4;
-extern struct platform_device s3c64xx_device_onenand1;
-extern struct platform_device s3c64xx_device_pcm0;
-extern struct platform_device s3c64xx_device_pcm1;
-extern struct platform_device s3c64xx_device_spi0;
-extern struct platform_device s3c64xx_device_spi1;
-extern struct platform_device s3c64xx_device_spi2;
-
-extern struct platform_device s3c_device_adc;
-extern struct platform_device s3c_device_cfcon;
-extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_hwmon;
-extern struct platform_device s3c_device_hsmmc0;
-extern struct platform_device s3c_device_hsmmc1;
-extern struct platform_device s3c_device_hsmmc2;
-extern struct platform_device s3c_device_hsmmc3;
-extern struct platform_device s3c_device_i2c0;
-extern struct platform_device s3c_device_i2c1;
-extern struct platform_device s3c_device_i2c2;
-extern struct platform_device s3c_device_i2c3;
-extern struct platform_device s3c_device_i2c4;
-extern struct platform_device s3c_device_i2c5;
-extern struct platform_device s3c_device_i2c6;
-extern struct platform_device s3c_device_i2c7;
-extern struct platform_device s3c_device_iis;
-extern struct platform_device s3c_device_lcd;
-extern struct platform_device s3c_device_nand;
-extern struct platform_device s3c_device_ohci;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c_device_rtc;
-extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_spi0;
-extern struct platform_device s3c_device_spi1;
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_timer[];
-extern struct platform_device s3c_device_usbgadget;
-extern struct platform_device s3c_device_usb_hsotg;
-extern struct platform_device s3c_device_usb_hsudc;
-extern struct platform_device s3c_device_wdt;
-
-extern struct platform_device samsung_asoc_idma;
-extern struct platform_device samsung_device_keypad;
-extern struct platform_device samsung_device_pwm;
-
-/* s3c2440 specific devices */
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern struct platform_device s3c_device_camif;
-extern struct platform_device s3c_device_ac97;
-
-#endif
-
-/**
- * s3c_set_platdata() - helper for setting platform data
- * @pd: The default platform data for this device.
- * @pdsize: The size of the platform data.
- * @pdev: Pointer to the device to fill in.
- *
- * This helper replaces a number of calls that copy and then set the
- * platform data of the device.
- */
-extern void *s3c_set_platdata(void *pd, size_t pdsize,
- struct platform_device *pdev);
-
-#endif /* __PLAT_DEVS_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - FB platform data definitions
- */
-
-#ifndef __PLAT_S3C_FB_H
-#define __PLAT_S3C_FB_H __FILE__
-
-#include <linux/platform_data/video_s3c.h>
-
-/**
- * s3c_fb_set_platdata() - Setup the FB device with platform data.
- * @pd: The platform data to set. The data is copied from the passed structure
- * so the machine data can mark the data __initdata so that any unused
- * machines will end up dumping their data at runtime.
- */
-extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
-
-/**
- * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s3c64xx_fb_gpio_setup_24bpp(void);
-
-#endif /* __PLAT_S3C_FB_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung Platform - GPIO pin configuration helper definitions
- */
-
-/* This is meant for core cpu support, machine or other driver files
- * should not be including this header.
- */
-
-#ifndef __PLAT_GPIO_CFG_HELPERS_H
-#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
-
-/* As a note, all gpio configuration functions are entered exclusively, either
- * with the relevant lock held or the system prevented from doing anything else
- * by disabling interrupts.
-*/
-
-static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
- unsigned int off, unsigned int config)
-{
- return (chip->config->set_config)(chip, off, config);
-}
-
-static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- return (chip->config->get_config)(chip, off);
-}
-
-static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull)
-{
- return (chip->config->set_pull)(chip, off, pull);
-}
-
-static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- return chip->config->get_pull(chip, off);
-}
-
-/* Pull-{up,down} resistor controls.
- *
- * S3C2410,S3C2440 = Pull-UP,
- * S3C2412,S3C2413 = Pull-Down
- * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
- * S3C2443 = Pull-Both [not same as S3C6400]
- */
-
-/**
- * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-up resistor.
- */
-extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
- * @chip: The gpio chip that is being configured
- * @off: The offset for the GPIO being configured
- * @param: pull: The pull mode being requested
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-down resistor.
- */
-extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
- * down or none
- *
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- * 00 = No pull resistor connected
- * 01 = Pull-up resistor connected
- * 10 = Pull-down resistor connected
- */
-extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * samsung_gpio_getpull_updown() - Get configuration for choice of up,
- * down or none
- *
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor
- * for the given GPIO in the same case as samsung_gpio_setpull_upown.
-*/
-extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
- unsigned int off);
-
-/**
- * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-up resistor for the
- * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
-*/
-extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
- unsigned int off);
-
-/**
- * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-down resistor for the
- * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
-*/
-extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
- unsigned int off);
-
-/**
- * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- * 00 = Pull-up resistor connected
- * 10 = Pull-down resistor connected
- * x1 = No pull up resistor
- */
-extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
- * @chip: The gpio chip that the GPIO pin belongs to.
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as samsung_gpio_setpull_upown.
-*/
-extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
- unsigned int off);
-
-#endif /* __PLAT_GPIO_CFG_HELPERS_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - GPIO pin configuration
- */
-
-/* This file contains the necessary definitions to get the basic gpio
- * pin configuration done such as setting a pin to input or output or
- * changing the pull-{up,down} configurations.
- */
-
-/* Note, this interface is being added to the s3c64xx arch first and will
- * be added to the s3c24xx systems later.
- */
-
-#ifndef __PLAT_GPIO_CFG_H
-#define __PLAT_GPIO_CFG_H __FILE__
-
-#include <linux/types.h>
-
-typedef unsigned int __bitwise samsung_gpio_pull_t;
-
-/* forward declaration if gpio-core.h hasn't been included */
-struct samsung_gpio_chip;
-
-/**
- * struct samsung_gpio_cfg GPIO configuration
- * @cfg_eint: Configuration setting when used for external interrupt source
- * @get_pull: Read the current pull configuration for the GPIO
- * @set_pull: Set the current pull configuration for the GPIO
- * @set_config: Set the current configuration for the GPIO
- * @get_config: Read the current configuration for the GPIO
- *
- * Each chip can have more than one type of GPIO bank available and some
- * have different capabilites even when they have the same control register
- * layouts. Provide an point to vector control routine and provide any
- * per-bank configuration information that other systems such as the
- * external interrupt code will need.
- *
- * @sa samsung_gpio_cfgpin
- * @sa s3c_gpio_getcfg
- * @sa s3c_gpio_setpull
- * @sa s3c_gpio_getpull
- */
-struct samsung_gpio_cfg {
- unsigned int cfg_eint;
-
- samsung_gpio_pull_t (*get_pull)(struct samsung_gpio_chip *chip, unsigned offs);
- int (*set_pull)(struct samsung_gpio_chip *chip, unsigned offs,
- samsung_gpio_pull_t pull);
-
- unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs);
- int (*set_config)(struct samsung_gpio_chip *chip, unsigned offs,
- unsigned config);
-};
-
-#define S3C_GPIO_SPECIAL_MARK (0xfffffff0)
-#define S3C_GPIO_SPECIAL(x) (S3C_GPIO_SPECIAL_MARK | (x))
-
-/* Defines for generic pin configurations */
-#define S3C_GPIO_INPUT (S3C_GPIO_SPECIAL(0))
-#define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1))
-#define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x))
-
-#define samsung_gpio_is_cfg_special(_cfg) \
- (((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
-
-/**
- * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
- * @pin pin The pin number to configure.
- * @to to The configuration for the pin's function.
- *
- * Configure which function is actually connected to the external
- * pin, such as an gpio input, output or some form of special function
- * connected to an internal peripheral block.
- *
- * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
- * or S3C_GPIO_SFN() to indicate one of the possible values that the helper
- * will then generate the correct bit mask and shift for the configuration.
- *
- * If a bank of GPIOs all needs to be set to special-function 2, then
- * the following code will work:
- *
- * for (gpio = start; gpio < end; gpio++)
- * s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- *
- * The @to parameter can also be a specific value already shifted to the
- * correct position in the control register, although these are discouraged
- * in newer kernels and are only being kept for compatibility.
- */
-extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
-
-/**
- * s3c_gpio_getcfg - Read the current function for a GPIO pin
- * @pin: The pin to read the configuration value for.
- *
- * Read the configuration state of the given @pin, returning a value that
- * could be passed back to s3c_gpio_cfgpin().
- *
- * @sa s3c_gpio_cfgpin
- */
-extern unsigned s3c_gpio_getcfg(unsigned int pin);
-
-/**
- * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
- * @start: The pin number to start at
- * @nr: The number of pins to configure from @start.
- * @cfg: The configuration for the pin's function
- *
- * Call s3c_gpio_cfgpin() for the @nr pins starting at @start.
- *
- * @sa s3c_gpio_cfgpin.
- */
-extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
- unsigned int cfg);
-
-/* Define values for the pull-{up,down} available for each gpio pin.
- *
- * These values control the state of the weak pull-{up,down} resistors
- * available on most pins on the S3C series. Not all chips support both
- * up or down settings, and it may be dependent on the chip that is being
- * used to whether the particular mode is available.
- */
-#define S3C_GPIO_PULL_NONE ((__force samsung_gpio_pull_t)0x00)
-#define S3C_GPIO_PULL_DOWN ((__force samsung_gpio_pull_t)0x01)
-#define S3C_GPIO_PULL_UP ((__force samsung_gpio_pull_t)0x02)
-
-/**
- * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
- * @pin: The pin number to configure the pull resistor.
- * @pull: The configuration for the pull resistor.
- *
- * This function sets the state of the pull-{up,down} resistor for the
- * specified pin. It will return 0 if successful, or a negative error
- * code if the pin cannot support the requested pull setting.
- *
- * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
-*/
-extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
-
-/**
- * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
- * @pin: The pin number to get the settings for
- *
- * Read the pull resistor value for the specified pin.
-*/
-extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
-
-/* configure `all` aspects of an gpio */
-
-/**
- * s3c_gpio_cfgall_range() - configure range of gpio functtion and pull.
- * @start: The gpio number to start at.
- * @nr: The number of gpio to configure from @start.
- * @cfg: The configuration to use
- * @pull: The pull setting to use.
- *
- * Run s3c_gpio_cfgpin() and s3c_gpio_setpull() over the gpio range starting
- * @gpio and running for @size.
- *
- * @sa s3c_gpio_cfgpin
- * @sa s3c_gpio_setpull
- * @sa s3c_gpio_cfgpin_range
- */
-extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
- unsigned int cfg, samsung_gpio_pull_t pull);
-
-static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
- unsigned int cfg)
-{
- return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE);
-}
-
-#endif /* __PLAT_GPIO_CFG_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - GPIO core
- */
-
-#ifndef __PLAT_SAMSUNG_GPIO_CORE_H
-#define __PLAT_SAMSUNG_GPIO_CORE_H
-
-/* Bring in machine-local definitions, especially S3C_GPIO_END */
-#include <mach/gpio-samsung.h>
-#include <linux/gpio/driver.h>
-
-#define GPIOCON_OFF (0x00)
-#define GPIODAT_OFF (0x04)
-
-#define con_4bit_shift(__off) ((__off) * 4)
-
-/* Define the core gpiolib support functions that the s3c platforms may
- * need to extend or change depending on the hardware and the s3c chip
- * selected at build or found at run time.
- *
- * These definitions are not intended for driver inclusion, there is
- * nothing here that should not live outside the platform and core
- * specific code.
-*/
-
-struct samsung_gpio_chip;
-
-/**
- * struct samsung_gpio_pm - power management (suspend/resume) information
- * @save: Routine to save the state of the GPIO block
- * @resume: Routine to resume the GPIO block.
- */
-struct samsung_gpio_pm {
- void (*save)(struct samsung_gpio_chip *chip);
- void (*resume)(struct samsung_gpio_chip *chip);
-};
-
-struct samsung_gpio_cfg;
-
-/**
- * struct samsung_gpio_chip - wrapper for specific implementation of gpio
- * @chip: The chip structure to be exported via gpiolib.
- * @base: The base pointer to the gpio configuration registers.
- * @group: The group register number for gpio interrupt support.
- * @irq_base: The base irq number.
- * @config: special function and pull-resistor control information.
- * @lock: Lock for exclusive access to this gpio bank.
- * @pm_save: Save information for suspend/resume support.
- * @bitmap_gpio_int: Bitmap for representing GPIO interrupt or not.
- *
- * This wrapper provides the necessary information for the Samsung
- * specific gpios being registered with gpiolib.
- *
- * The lock protects each gpio bank from multiple access of the shared
- * configuration registers, or from reading of data whilst another thread
- * is writing to the register set.
- *
- * Each chip has its own lock to avoid any contention between different
- * CPU cores trying to get one lock for different GPIO banks, where each
- * bank of GPIO has its own register space and configuration registers.
- */
-struct samsung_gpio_chip {
- struct gpio_chip chip;
- struct samsung_gpio_cfg *config;
- struct samsung_gpio_pm *pm;
- void __iomem *base;
- int irq_base;
- int group;
- spinlock_t lock;
-#ifdef CONFIG_PM
- u32 pm_save[4];
-#endif
- u32 bitmap_gpio_int;
-};
-
-static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
-{
- return container_of(gpc, struct samsung_gpio_chip, chip);
-}
-
-/**
- * samsung_gpiolib_to_irq - convert gpio pin to irq number
- * @chip: The gpio chip that the pin belongs to.
- * @offset: The offset of the pin in the chip.
- *
- * This helper returns the irq number calculated from the chip->irq_base and
- * the provided offset.
- */
-extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
-
-/* exported for core SoC support to change */
-extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip)
-{
- return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
-}
-#else
-/* machine specific code should provide samsung_gpiolib_getchip */
-
-extern struct samsung_gpio_chip s3c24xx_gpios[];
-
-static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
-{
- struct samsung_gpio_chip *chip;
-
- if (pin > S3C_GPIO_END)
- return NULL;
-
- chip = &s3c24xx_gpios[pin/32];
- return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
-}
-
-static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
-#endif
-
-#ifdef CONFIG_PM
-extern struct samsung_gpio_pm samsung_gpio_pm_1bit;
-extern struct samsung_gpio_pm samsung_gpio_pm_2bit;
-extern struct samsung_gpio_pm samsung_gpio_pm_4bit;
-#define __gpio_pm(x) x
-#else
-#define samsung_gpio_pm_1bit NULL
-#define samsung_gpio_pm_2bit NULL
-#define samsung_gpio_pm_4bit NULL
-#define __gpio_pm(x) NULL
-
-#endif /* CONFIG_PM */
-
-/* locking wrappers to deal with multiple access to the same gpio bank */
-#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
-#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
-
-#endif /* __PLAT_SAMSUNG_GPIO_CORE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller core functions
- */
-
-#ifndef __ASM_ARCH_IIC_CORE_H
-#define __ASM_ARCH_IIC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_i2c0_setname(char *name)
-{
- /* currently this device is always compiled in */
- s3c_device_i2c0.name = name;
-}
-
-static inline void s3c_i2c1_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_I2C1
- s3c_device_i2c1.name = name;
-#endif
-}
-
-static inline void s3c_i2c2_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_I2C2
- s3c_device_i2c2.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_IIC_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Samsung Platform - Keypad platform data definitions
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- */
-
-#ifndef __PLAT_SAMSUNG_KEYPAD_H
-#define __PLAT_SAMSUNG_KEYPAD_H
-
-#include <linux/input/samsung-keypad.h>
-
-/**
- * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use with Samsung Keypad device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd);
-
-/* defined by architecture to configure gpio. */
-extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
-
-#endif /* __PLAT_SAMSUNG_KEYPAD_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2003, 2007 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - Memory map definitions (virtual addresses)
- */
-
-#ifndef __ASM_PLAT_MAP_H
-#define __ASM_PLAT_MAP_H __FILE__
-
-/* Fit all our registers in at 0xF6000000 upwards, trying to use as
- * little of the VA space as possible so vmalloc and friends have a
- * better chance of getting memory.
- *
- * we try to ensure stuff like the IRQ registers are available for
- * an single MOVS instruction (ie, only 8 bits of set data)
- */
-
-#define S3C_ADDR_BASE 0xF6000000
-
-#ifndef __ASSEMBLY__
-#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x))
-#else
-#define S3C_ADDR(x) (S3C_ADDR_BASE + (x))
-#endif
-
-#define S3C_VA_IRQ S3C_ADDR(0x00000000) /* irq controller(s) */
-#define S3C_VA_SYS S3C_ADDR(0x00100000) /* system control */
-#define S3C_VA_MEM S3C_ADDR(0x00200000) /* memory control */
-#define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */
-#define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */
-#define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */
-
-/* This is used for the CPU specific mappings that may be needed, so that
- * they do not need to directly used S3C_ADDR() and thus make it easier to
- * modify the space for mapping.
- */
-#define S3C_ADDR_CPU(x) S3C_ADDR(0x00500000 + (x))
-
-#endif /* __ASM_PLAT_MAP_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Memory map definitions
- */
-
-#ifndef __ASM_PLAT_MAP_S3C_H
-#define __ASM_PLAT_MAP_S3C_H __FILE__
-
-#include <mach/map.h>
-
-#define S3C24XX_VA_IRQ S3C_VA_IRQ
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C24XX_VA_UART S3C_VA_UART
-
-#define S3C24XX_VA_TIMER S3C_VA_TIMER
-#define S3C24XX_VA_CLKPWR S3C_VA_SYS
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-
-#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000)
-
-#define S3C2410_PA_UART (0x50000000)
-#define S3C24XX_PA_UART S3C2410_PA_UART
-
-/*
- * GPIO ports
- *
- * the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 mapping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO (0x56000000)
-#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
-
-#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
-
-#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
-#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
-
-#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
-
-#define S3C2410_ADDR(x) S3C_ADDR(x)
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
-#include <plat/map-s5p.h>
-
-#endif /* __ASM_PLAT_MAP_S3C_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P - Memory map definitions
- */
-
-#ifndef __ASM_PLAT_MAP_S5P_H
-#define __ASM_PLAT_MAP_S5P_H __FILE__
-
-#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
-#define VA_VIC0 VA_VIC(0)
-#define VA_VIC1 VA_VIC(1)
-#define VA_VIC2 VA_VIC(2)
-#define VA_VIC3 VA_VIC(3)
-
-#include <plat/map-s3c.h>
-
-#endif /* __ASM_PLAT_MAP_S5P_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2013 Samsung Electronics Co., Ltd.
- * Tomasz Figa <t.figa@samsung.com>
- * Copyright (c) 2004 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Written by Ben Dooks, <ben@simtec.co.uk>
- */
-
-#ifndef __PLAT_SAMSUNG_PM_COMMON_H
-#define __PLAT_SAMSUNG_PM_COMMON_H __FILE__
-
-#include <linux/irq.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-/* sleep save info */
-
-/**
- * struct sleep_save - save information for shared peripherals.
- * @reg: Pointer to the register to save.
- * @val: Holder for the value saved from reg.
- *
- * This describes a list of registers which is used by the pm core and
- * other subsystem to save and restore register values over suspend.
- */
-struct sleep_save {
- void __iomem *reg;
- unsigned long val;
-};
-
-#define SAVE_ITEM(x) \
- { .reg = (x) }
-
-/* helper functions to save/restore lists of registers. */
-
-extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);
-
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2004 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Written by Ben Dooks, <ben@simtec.co.uk>
- */
-
-/* s3c_pm_init
- *
- * called from board at initialisation time to setup the power
- * management
-*/
-
-#include <plat/pm-common.h>
-
-struct device;
-
-#ifdef CONFIG_SAMSUNG_PM
-
-extern __init int s3c_pm_init(void);
-extern __init int s3c64xx_pm_init(void);
-
-#else
-
-static inline int s3c_pm_init(void)
-{
- return 0;
-}
-
-static inline int s3c64xx_pm_init(void)
-{
- return 0;
-}
-#endif
-
-/* configuration for the IRQ mask over sleep */
-extern unsigned long s3c_irqwake_intmask;
-extern unsigned long s3c_irqwake_eintmask;
-
-/* per-cpu sleep functions */
-
-extern void (*pm_cpu_prep)(void);
-extern int (*pm_cpu_sleep)(unsigned long);
-
-/* Flags for PM Control */
-
-extern unsigned long s3c_pm_flags;
-
-/* from sleep.S */
-
-extern int s3c2410_cpu_suspend(unsigned long);
-
-#ifdef CONFIG_PM_SLEEP
-extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
-extern void s3c_cpu_resume(void);
-#else
-#define s3c_irq_wake NULL
-#define s3c_cpu_resume NULL
-#endif
-
-#ifdef CONFIG_SAMSUNG_PM
-extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
-#else
-#define s3c_irqext_wake NULL
-#endif
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-/**
- * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
- * @set: set bits for the state of the LEDs
- * @clear: clear bits for the state of the LEDs.
- */
-extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
-
-#else
-static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
-#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
-
-/**
- * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
- *
- * Setup all the necessary GPIO pins for waking the system on external
- * interrupt.
- */
-extern void s3c_pm_configure_extint(void);
-
-#ifdef CONFIG_GPIO_SAMSUNG
-/**
- * samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
- *
- * Restore the state of the GPIO pins after sleep, which may involve ensuring
- * that we do not glitch the state of the pins from that the bootloader's
- * resume code has done.
-*/
-extern void samsung_pm_restore_gpios(void);
-
-/**
- * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
- *
- * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
- */
-extern void samsung_pm_save_gpios(void);
-#else
-static inline void samsung_pm_restore_gpios(void) {}
-static inline void samsung_pm_save_gpios(void) {}
-#endif
-
-extern void s3c_pm_save_core(void);
-extern void s3c_pm_restore_core(void);
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2013 Tomasz Figa <tomasz.figa@gmail.com>
- *
- * Samsung PWM controller platform data helpers.
- */
-
-#ifndef __ASM_ARCH_PWM_CORE_H
-#define __ASM_ARCH_PWM_CORE_H __FILE__
-
-#include <clocksource/samsung_pwm.h>
-
-#ifdef CONFIG_SAMSUNG_DEV_PWM
-extern void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd);
-#else
-static inline void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd) { }
-#endif
-
-#endif /* __ASM_ARCH_PWM_CORE_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2004 Shannon Holland <holland@loser.net>
- *
- * S3C2410 ADC registers
- */
-
-#ifndef __ASM_ARCH_REGS_ADC_H
-#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
-
-#define S3C2410_ADCREG(x) (x)
-
-#define S3C2410_ADCCON S3C2410_ADCREG(0x00)
-#define S3C2410_ADCTSC S3C2410_ADCREG(0x04)
-#define S3C2410_ADCDLY S3C2410_ADCREG(0x08)
-#define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C)
-#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10)
-#define S3C64XX_ADCUPDN S3C2410_ADCREG(0x14)
-#define S3C2443_ADCMUX S3C2410_ADCREG(0x18)
-#define S3C64XX_ADCCLRINT S3C2410_ADCREG(0x18)
-#define S5P_ADCMUX S3C2410_ADCREG(0x1C)
-#define S3C64XX_ADCCLRINTPNDNUP S3C2410_ADCREG(0x20)
-
-
-/* ADCCON Register Bits */
-#define S3C64XX_ADCCON_RESSEL (1<<16)
-#define S3C2410_ADCCON_ECFLG (1<<15)
-#define S3C2410_ADCCON_PRSCEN (1<<14)
-#define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6)
-#define S3C2410_ADCCON_PRSCVLMASK (0xFF<<6)
-#define S3C2410_ADCCON_SELMUX(x) (((x)&0x7)<<3)
-#define S3C2410_ADCCON_MUXMASK (0x7<<3)
-#define S3C2416_ADCCON_RESSEL (1 << 3)
-#define S3C2410_ADCCON_STDBM (1<<2)
-#define S3C2410_ADCCON_READ_START (1<<1)
-#define S3C2410_ADCCON_ENABLE_START (1<<0)
-#define S3C2410_ADCCON_STARTMASK (0x3<<0)
-
-
-/* ADCTSC Register Bits */
-#define S3C2443_ADCTSC_UD_SEN (1 << 8)
-#define S3C2410_ADCTSC_YM_SEN (1<<7)
-#define S3C2410_ADCTSC_YP_SEN (1<<6)
-#define S3C2410_ADCTSC_XM_SEN (1<<5)
-#define S3C2410_ADCTSC_XP_SEN (1<<4)
-#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3)
-#define S3C2410_ADCTSC_AUTO_PST (1<<2)
-#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0)
-
-/* ADCDAT0 Bits */
-#define S3C2410_ADCDAT0_UPDOWN (1<<15)
-#define S3C2410_ADCDAT0_AUTO_PST (1<<14)
-#define S3C2410_ADCDAT0_XY_PST (0x3<<12)
-#define S3C2410_ADCDAT0_XPDATA_MASK (0x03FF)
-
-/* ADCDAT1 Bits */
-#define S3C2410_ADCDAT1_UPDOWN (1<<15)
-#define S3C2410_ADCDAT1_AUTO_PST (1<<14)
-#define S3C2410_ADCDAT1_XY_PST (0x3<<12)
-#define S3C2410_ADCDAT1_YPDATA_MASK (0x03FF)
-
-#endif /* __ASM_ARCH_REGS_ADC_H */
-
-
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C - IRQ detection types.
- */
-
-/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including
- * the S3C64XX
-*/
-#define S3C2410_EXTINT_LOWLEV (0x00)
-#define S3C2410_EXTINT_HILEV (0x01)
-#define S3C2410_EXTINT_FALLEDGE (0x02)
-#define S3C2410_EXTINT_RISEEDGE (0x04)
-#define S3C2410_EXTINT_BOTHEDGE (0x06)
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - SDHCI (HSMMC) platform data definitions
- */
-
-#ifndef __PLAT_S3C_SDHCI_H
-#define __PLAT_S3C_SDHCI_H __FILE__
-
-#include <linux/platform_data/mmc-sdhci-s3c.h>
-#include <plat/devs.h>
-
-/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
- * @pd: The default platform data for this device.
- * @set: Pointer to the platform data to fill in.
- */
-extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
- struct s3c_sdhci_platdata *set);
-
-/**
- * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use withe S3C SDHCI device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
-extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
-extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
-extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd);
-
-/* Default platform data, exported so that per-cpu initialisation can
- * set the correct one when there are more than one cpu type selected.
-*/
-
-extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
-extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
-extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
-extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
-
-/* Helper function availability */
-
-extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-
-/* S3C2416 SDHCI setup */
-
-#ifdef CONFIG_S3C2416_SETUP_SDHCI
-static inline void s3c2416_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
-#endif /* CONFIG_S3C_DEV_HSMMC */
-}
-
-static inline void s3c2416_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-}
-
-#else
-static inline void s3c2416_default_sdhci0(void) { }
-static inline void s3c2416_default_sdhci1(void) { }
-
-#endif /* CONFIG_S3C2416_SETUP_SDHCI */
-
-/* S3C64XX SDHCI setup */
-
-#ifdef CONFIG_S3C64XX_SETUP_SDHCI
-static inline void s3c6400_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s3c6400_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s3c6400_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void s3c6410_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s3c6410_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s3c6410_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s3c6410_default_sdhci0(void) { }
-static inline void s3c6410_default_sdhci1(void) { }
-static inline void s3c6410_default_sdhci2(void) { }
-static inline void s3c6400_default_sdhci0(void) { }
-static inline void s3c6400_default_sdhci1(void) { }
-static inline void s3c6400_default_sdhci2(void) { }
-
-#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
-
-static inline void s3c_sdhci_setname(int id, char *name)
-{
- switch (id) {
-#ifdef CONFIG_S3C_DEV_HSMMC
- case 0:
- s3c_device_hsmmc0.name = name;
- break;
-#endif
-#ifdef CONFIG_S3C_DEV_HSMMC1
- case 1:
- s3c_device_hsmmc1.name = name;
- break;
-#endif
-#ifdef CONFIG_S3C_DEV_HSMMC2
- case 2:
- s3c_device_hsmmc2.name = name;
- break;
-#endif
-#ifdef CONFIG_S3C_DEV_HSMMC3
- case 3:
- s3c_device_hsmmc3.name = name;
- break;
-#endif
- default:
- break;
- }
-}
-#endif /* __PLAT_S3C_SDHCI_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- */
-
-#ifndef __PLAT_SAMSUNG_USB_PHY_H
-#define __PLAT_SAMSUNG_USB_PHY_H __FILE__
-
-extern int s3c_usb_phy_init(struct platform_device *pdev, int type);
-extern int s3c_usb_phy_exit(struct platform_device *pdev, int type);
-
-#endif /* __PLAT_SAMSUNG_USB_PHY_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Support for wakeup mask interrupts on newer SoCs
- */
-
-#ifndef __PLAT_WAKEUP_MASK_H
-#define __PLAT_WAKEUP_MASK_H __file__
-
-/* if no irq yet defined, but still want to mask */
-#define NO_WAKEUP_IRQ (0x90000000)
-
-/**
- * struct samsung_wakeup_mask - wakeup mask information
- * @irq: The interrupt associated with this wakeup.
- * @bit: The bit, as a (1 << bitno) controlling this source.
- */
-struct samsung_wakeup_mask {
- unsigned int irq;
- u32 bit;
-};
-
-/**
- * samsung_sync_wakemask - sync wakeup mask information for pm
- * @reg: The register that is used.
- * @masks: The list of masks to use.
- * @nr_masks: The number of entries pointed to buy @masks.
- *
- * Synchronise the wakeup mask information at suspend time from the list
- * of interrupts and control bits in @masks. We do this at suspend time
- * as overriding the relevant irq chips is harder and the register is only
- * required to be correct before we enter sleep.
- */
-extern void samsung_sync_wakemask(void __iomem *reg,
- const struct samsung_wakeup_mask *masks,
- int nr_masks);
-
-#endif /* __PLAT_WAKEUP_MASK_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// S3C series CPU initialisation
-
-/*
- * NOTE: Code in this file is not used on S3C64xx when booting with
- * Device Tree support.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-
-static struct cpu_table *cpu;
-
-static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
- struct cpu_table *tab,
- unsigned int count)
-{
- for (; count != 0; count--, tab++) {
- if ((idcode & tab->idmask) == (tab->idcode & tab->idmask))
- return tab;
- }
-
- return NULL;
-}
-
-void __init s3c_init_cpu(unsigned long idcode,
- struct cpu_table *cputab, unsigned int cputab_size)
-{
- cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
-
- if (cpu == NULL) {
- printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
- panic("Unknown S3C24XX CPU");
- }
-
- printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
-
- if (cpu->init == NULL) {
- printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
- panic("Unsupported Samsung CPU");
- }
-
- if (cpu->map_io)
- cpu->map_io();
-}
-
-/* s3c24xx_init_clocks
- *
- * Initialise the clock subsystem and associated information from the
- * given master crystal value.
- *
- * xtal = 0 -> use default PLL crystal value (normally 12MHz)
- * != 0 -> PLL crystal value in Hz
-*/
-
-void __init s3c24xx_init_clocks(int xtal)
-{
- if (xtal == 0)
- xtal = 12*1000*1000;
-
- if (cpu == NULL)
- panic("s3c24xx_init_clocks: no cpu setup?\n");
-
- if (cpu->init_clocks == NULL)
- panic("s3c24xx_init_clocks: cpu has no clock init\n");
- else
- (cpu->init_clocks)(xtal);
-}
-
-/* uart management */
-#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
-static int nr_uarts __initdata = 0;
-
-#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
-static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
-#endif
-
-/* s3c24xx_init_uartdevs
- *
- * copy the specified platform data and configuration into our central
- * set of devices, before the data is thrown away after the init process.
- *
- * This also fills in the array passed to the serial driver for the
- * early initialisation of the console.
-*/
-
-void __init s3c24xx_init_uartdevs(char *name,
- struct s3c24xx_uart_resources *res,
- struct s3c2410_uartcfg *cfg, int no)
-{
-#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
- struct platform_device *platdev;
- struct s3c2410_uartcfg *cfgptr = uart_cfgs;
- struct s3c24xx_uart_resources *resp;
- int uart;
-
- memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
-
- for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
- platdev = s3c24xx_uart_src[cfgptr->hwport];
-
- resp = res + cfgptr->hwport;
-
- s3c24xx_uart_devs[uart] = platdev;
-
- platdev->name = name;
- platdev->resource = resp->resources;
- platdev->num_resources = resp->nr_resources;
-
- platdev->dev.platform_data = cfgptr;
- }
-
- nr_uarts = no;
-#endif
-}
-
-void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- if (cpu == NULL)
- return;
-
- if (cpu->init_uarts == NULL && IS_ENABLED(CONFIG_SAMSUNG_ATAGS)) {
- printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
- } else
- (cpu->init_uarts)(cfg, no);
-}
-#endif
-
-static int __init s3c_arch_init(void)
-{
- int ret;
-
- /* init is only needed for ATAGS based platforms */
- if (!IS_ENABLED(CONFIG_ATAGS) ||
- (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
- return 0;
-
- // do the correct init for cpu
-
- if (cpu == NULL) {
- /* Not needed when booting with device tree. */
- if (of_have_populated_dt())
- return 0;
- panic("s3c_arch_init: NULL cpu\n");
- }
-
- ret = (cpu->init)();
- if (ret != 0)
- return ret;
-#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
- ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
-#endif
- return ret;
-}
-
-arch_initcall(s3c_arch_init);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2010 Ben Dooks <ben-linux <at> fluff.org>
-//
-// Helper for platform data setting
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-
-void __init *s3c_set_platdata(void *pd, size_t pdsize,
- struct platform_device *pdev)
-{
- void *npd;
-
- if (!pd) {
- /* too early to use dev_name(), may not be registered */
- printk(KERN_ERR "%s: no platform data supplied\n", pdev->name);
- return NULL;
- }
-
- npd = kmemdup(pd, pdsize, GFP_KERNEL);
- if (!npd)
- return NULL;
-
- pdev->dev.platform_data = npd;
- return npd;
-}
-
-void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
- struct s3c_sdhci_platdata *set)
-{
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->host_caps2)
- set->host_caps2 |= pd->host_caps2;
- if (pd->pm_caps)
- set->pm_caps |= pd->pm_caps;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2013 Samsung Electronics Co., Ltd.
-// Tomasz Figa <t.figa@samsung.com>
-// Copyright (C) 2008 Openmoko, Inc.
-// Copyright (C) 2004-2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// Samsung common power management helper functions.
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include <plat/pm-common.h>
-
-/* helper functions to save and restore register state */
-
-/**
- * s3c_pm_do_save() - save a set of registers for restoration on resume.
- * @ptr: Pointer to an array of registers.
- * @count: Size of the ptr array.
- *
- * Run through the list of registers given, saving their contents in the
- * array for later restoration when we wakeup.
- */
-void s3c_pm_do_save(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- ptr->val = readl_relaxed(ptr->reg);
- S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
- }
-}
-
-/**
- * s3c_pm_do_restore() - restore register values from the save list.
- * @ptr: Pointer to an array of registers.
- * @count: Size of the ptr array.
- *
- * Restore the register values saved from s3c_pm_do_save().
- *
- * Note, we do not use S3C_PMDBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
-
-void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- pr_debug("restore %p (restore %08lx, was %08x)\n",
- ptr->reg, ptr->val, readl_relaxed(ptr->reg));
-
- writel_relaxed(ptr->val, ptr->reg);
- }
-}
-
-/**
- * s3c_pm_do_restore_core() - early restore register values from save list.
- * @ptr: Pointer to an array of registers.
- * @count: Size of the ptr array.
- *
- * This is similar to s3c_pm_do_restore() except we try and minimise the
- * side effects of the function in case registers that hardware might need
- * to work has been restored.
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
-
-void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++)
- writel_relaxed(ptr->val, ptr->reg);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// S3C series GPIO PM code
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/gpio-samsung.h>
-
-#include <plat/gpio-core.h>
-#include <plat/pm.h>
-
-/* PM GPIO helpers */
-
-#define OFFS_CON (0x00)
-#define OFFS_DAT (0x04)
-#define OFFS_UP (0x08)
-
-static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip)
-{
- chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
- chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
-}
-
-static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip)
-{
- void __iomem *base = chip->base;
- u32 old_gpcon = __raw_readl(base + OFFS_CON);
- u32 old_gpdat = __raw_readl(base + OFFS_DAT);
- u32 gps_gpcon = chip->pm_save[0];
- u32 gps_gpdat = chip->pm_save[1];
- u32 gpcon;
-
- /* GPACON only has one bit per control / data and no PULLUPs.
- * GPACON[x] = 0 => Output, 1 => SFN */
-
- /* first set all SFN bits to SFN */
-
- gpcon = old_gpcon | gps_gpcon;
- __raw_writel(gpcon, base + OFFS_CON);
-
- /* now set all the other bits */
-
- __raw_writel(gps_gpdat, base + OFFS_DAT);
- __raw_writel(gps_gpcon, base + OFFS_CON);
-
- S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
- chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-struct samsung_gpio_pm samsung_gpio_pm_1bit = {
- .save = samsung_gpio_pm_1bit_save,
- .resume = samsung_gpio_pm_1bit_resume,
-};
-
-static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip)
-{
- chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
- chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
- chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
-}
-
-/* Test whether the given masked+shifted bits of an GPIO configuration
- * are one of the SFN (special function) modes. */
-
-static inline int is_sfn(unsigned long con)
-{
- return con >= 2;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an input */
-
-static inline int is_in(unsigned long con)
-{
- return con == 0;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an output */
-
-static inline int is_out(unsigned long con)
-{
- return con == 1;
-}
-
-/**
- * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank
- * @chip: The chip information to resume.
- *
- * Restore one of the GPIO banks that was saved during suspend. This is
- * not as simple as once thought, due to the possibility of glitches
- * from the order that the CON and DAT registers are set in.
- *
- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
- * combinations of changes to check. Three of these, if the pin stays
- * in the same configuration can be discounted. This leaves us with
- * the following:
- *
- * { IN => OUT } Change DAT first
- * { IN => SFN } Change CON first
- * { OUT => SFN } Change CON first, so new data will not glitch
- * { OUT => IN } Change CON first, so new data will not glitch
- * { SFN => IN } Change CON first
- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
- *
- * We do not currently deal with the UP registers as these control
- * weak resistors, so a small delay in change should not need to bring
- * these into the calculations.
- *
- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
- * state for when it is next output.
- */
-static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip)
-{
- void __iomem *base = chip->base;
- u32 old_gpcon = __raw_readl(base + OFFS_CON);
- u32 old_gpdat = __raw_readl(base + OFFS_DAT);
- u32 gps_gpcon = chip->pm_save[0];
- u32 gps_gpdat = chip->pm_save[1];
- u32 gpcon, old, new, mask;
- u32 change_mask = 0x0;
- int nr;
-
- /* restore GPIO pull-up settings */
- __raw_writel(chip->pm_save[2], base + OFFS_UP);
-
- /* Create a change_mask of all the items that need to have
- * their CON value changed before their DAT value, so that
- * we minimise the work between the two settings.
- */
-
- for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
- old = (old_gpcon & mask) >> nr;
- new = (gps_gpcon & mask) >> nr;
-
- /* If there is no change, then skip */
-
- if (old == new)
- continue;
-
- /* If both are special function, then skip */
-
- if (is_sfn(old) && is_sfn(new))
- continue;
-
- /* Change is IN => OUT, do not change now */
-
- if (is_in(old) && is_out(new))
- continue;
-
- /* Change is SFN => OUT, do not change now */
-
- if (is_sfn(old) && is_out(new))
- continue;
-
- /* We should now be at the case of IN=>SFN,
- * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
- change_mask |= mask;
- }
-
-
- /* Write the new CON settings */
-
- gpcon = old_gpcon & ~change_mask;
- gpcon |= gps_gpcon & change_mask;
-
- __raw_writel(gpcon, base + OFFS_CON);
-
- /* Now change any items that require DAT,CON */
-
- __raw_writel(gps_gpdat, base + OFFS_DAT);
- __raw_writel(gps_gpcon, base + OFFS_CON);
-
- S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
- chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-struct samsung_gpio_pm samsung_gpio_pm_2bit = {
- .save = samsung_gpio_pm_2bit_save,
- .resume = samsung_gpio_pm_2bit_resume,
-};
-
-#if defined(CONFIG_ARCH_S3C64XX)
-static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
-{
- chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
- chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
- chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
-
- if (chip->chip.ngpio > 8)
- chip->pm_save[0] = __raw_readl(chip->base - 4);
-}
-
-static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
-{
- u32 old, new, mask;
- u32 change_mask = 0x0;
- int nr;
-
- for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
- old = (old_gpcon & mask) >> nr;
- new = (gps_gpcon & mask) >> nr;
-
- /* If there is no change, then skip */
-
- if (old == new)
- continue;
-
- /* If both are special function, then skip */
-
- if (is_sfn(old) && is_sfn(new))
- continue;
-
- /* Change is IN => OUT, do not change now */
-
- if (is_in(old) && is_out(new))
- continue;
-
- /* Change is SFN => OUT, do not change now */
-
- if (is_sfn(old) && is_out(new))
- continue;
-
- /* We should now be at the case of IN=>SFN,
- * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
- change_mask |= mask;
- }
-
- return change_mask;
-}
-
-static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index)
-{
- void __iomem *con = chip->base + (index * 4);
- u32 old_gpcon = __raw_readl(con);
- u32 gps_gpcon = chip->pm_save[index + 1];
- u32 gpcon, mask;
-
- mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
-
- gpcon = old_gpcon & ~mask;
- gpcon |= gps_gpcon & mask;
-
- __raw_writel(gpcon, con);
-}
-
-static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip)
-{
- void __iomem *base = chip->base;
- u32 old_gpcon[2];
- u32 old_gpdat = __raw_readl(base + OFFS_DAT);
- u32 gps_gpdat = chip->pm_save[2];
-
- /* First, modify the CON settings */
-
- old_gpcon[0] = 0;
- old_gpcon[1] = __raw_readl(base + OFFS_CON);
-
- samsung_gpio_pm_4bit_con(chip, 0);
- if (chip->chip.ngpio > 8) {
- old_gpcon[0] = __raw_readl(base - 4);
- samsung_gpio_pm_4bit_con(chip, -1);
- }
-
- /* Now change the configurations that require DAT,CON */
-
- __raw_writel(chip->pm_save[2], base + OFFS_DAT);
- __raw_writel(chip->pm_save[1], base + OFFS_CON);
- if (chip->chip.ngpio > 8)
- __raw_writel(chip->pm_save[0], base - 4);
-
- __raw_writel(chip->pm_save[2], base + OFFS_DAT);
- __raw_writel(chip->pm_save[3], base + OFFS_UP);
-
- if (chip->chip.ngpio > 8) {
- S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
- chip->chip.label, old_gpcon[0], old_gpcon[1],
- __raw_readl(base - 4),
- __raw_readl(base + OFFS_CON),
- old_gpdat, gps_gpdat);
- } else
- S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
- chip->chip.label, old_gpcon[1],
- __raw_readl(base + OFFS_CON),
- old_gpdat, gps_gpdat);
-}
-
-struct samsung_gpio_pm samsung_gpio_pm_4bit = {
- .save = samsung_gpio_pm_4bit_save,
- .resume = samsung_gpio_pm_4bit_resume,
-};
-#endif /* CONFIG_ARCH_S3C64XX */
-
-/**
- * samsung_pm_save_gpio() - save gpio chip data for suspend
- * @ourchip: The chip for suspend.
- */
-static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip)
-{
- struct samsung_gpio_pm *pm = ourchip->pm;
-
- if (pm == NULL || pm->save == NULL)
- S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
- else
- pm->save(ourchip);
-}
-
-/**
- * samsung_pm_save_gpios() - Save the state of the GPIO banks.
- *
- * For all the GPIO banks, save the state of each one ready for going
- * into a suspend mode.
- */
-void samsung_pm_save_gpios(void)
-{
- struct samsung_gpio_chip *ourchip;
- unsigned int gpio_nr;
-
- for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
- ourchip = samsung_gpiolib_getchip(gpio_nr);
- if (!ourchip) {
- gpio_nr++;
- continue;
- }
-
- samsung_pm_save_gpio(ourchip);
-
- S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
- ourchip->chip.label,
- ourchip->pm_save[0],
- ourchip->pm_save[1],
- ourchip->pm_save[2],
- ourchip->pm_save[3]);
-
- gpio_nr += ourchip->chip.ngpio;
- gpio_nr += CONFIG_S3C_GPIO_SPACE;
- }
-}
-
-/**
- * samsung_pm_resume_gpio() - restore gpio chip data after suspend
- * @ourchip: The suspended chip.
- */
-static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip)
-{
- struct samsung_gpio_pm *pm = ourchip->pm;
-
- if (pm == NULL || pm->resume == NULL)
- S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
- else
- pm->resume(ourchip);
-}
-
-void samsung_pm_restore_gpios(void)
-{
- struct samsung_gpio_chip *ourchip;
- unsigned int gpio_nr;
-
- for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
- ourchip = samsung_gpiolib_getchip(gpio_nr);
- if (!ourchip) {
- gpio_nr++;
- continue;
- }
-
- samsung_pm_resume_gpio(ourchip);
-
- gpio_nr += ourchip->chip.ngpio;
- gpio_nr += CONFIG_S3C_GPIO_SPACE;
- }
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2004-2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-// http://armlinux.simtec.co.uk/
-//
-// S3C common power management (suspend to ram) support.
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/suspend.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-irq.h>
-#include <mach/irqs.h>
-
-#include <asm/irq.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <mach/pm-core.h>
-
-/* for external use */
-
-unsigned long s3c_pm_flags;
-
-/* The IRQ ext-int code goes here, it is too small to currently bother
- * with its own file. */
-
-unsigned long s3c_irqwake_intmask = 0xffffffffL;
-unsigned long s3c_irqwake_eintmask = 0xffffffffL;
-
-int s3c_irqext_wake(struct irq_data *data, unsigned int state)
-{
- unsigned long bit = 1L << IRQ_EINT_BIT(data->irq);
-
- if (!(s3c_irqwake_eintallow & bit))
- return -ENOENT;
-
- printk(KERN_INFO "wake %s for irq %d\n",
- state ? "enabled" : "disabled", data->irq);
-
- if (!state)
- s3c_irqwake_eintmask |= bit;
- else
- s3c_irqwake_eintmask &= ~bit;
-
- return 0;
-}
-
-void (*pm_cpu_prep)(void);
-int (*pm_cpu_sleep)(unsigned long);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c_pm_enter(suspend_state_t state)
-{
- int ret;
- /* ensure the debug is initialised (if enabled) */
- s3c_pm_debug_init_uart();
-
- S3C_PMDBG("%s(%d)\n", __func__, state);
-
- if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
- printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
- return -EINVAL;
- }
-
- /* check if we have anything to wake-up with... bad things seem
- * to happen if you suspend with no wakeup (system will often
- * require a full power-cycle)
- */
-
- if (!of_have_populated_dt() &&
- !any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
- !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
- printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
- printk(KERN_ERR "%s: Aborting sleep\n", __func__);
- return -EINVAL;
- }
-
- /* save all necessary core registers not covered by the drivers */
-
- if (!of_have_populated_dt()) {
- samsung_pm_save_gpios();
- samsung_pm_saved_gpios();
- }
-
- s3c_pm_save_uarts(soc_is_s3c2410());
- s3c_pm_save_core();
-
- /* set the irq configuration for wake */
-
- s3c_pm_configure_extint();
-
- S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
- s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
- s3c_pm_arch_prepare_irqs();
-
- /* call cpu specific preparation */
-
- pm_cpu_prep();
-
- /* flush cache back to ram */
-
- flush_cache_all();
-
- s3c_pm_check_store();
-
- /* send the cpu to sleep... */
-
- s3c_pm_arch_stop_clocks();
-
- /* this will also act as our return point from when
- * we resume as it saves its own register state and restores it
- * during the resume. */
-
- ret = cpu_suspend(0, pm_cpu_sleep);
- if (ret)
- return ret;
-
- /* restore the system state */
-
- s3c_pm_restore_core();
- s3c_pm_restore_uarts(soc_is_s3c2410());
-
- if (!of_have_populated_dt()) {
- samsung_pm_restore_gpios();
- s3c_pm_restored_gpios();
- }
-
- s3c_pm_debug_init_uart();
-
- /* check what irq (if any) restored the system */
-
- s3c_pm_arch_show_resume_irqs();
-
- S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
-
- /* LEDs should now be 1110 */
- s3c_pm_debug_smdkled(1 << 1, 0);
-
- s3c_pm_check_restore();
-
- /* ok, let's return from sleep */
-
- S3C_PMDBG("S3C PM Resume (post-restore)\n");
- return 0;
-}
-
-static int s3c_pm_prepare(void)
-{
- /* prepare check area if configured */
-
- s3c_pm_check_prepare();
- return 0;
-}
-
-static void s3c_pm_finish(void)
-{
- s3c_pm_check_cleanup();
-}
-
-static const struct platform_suspend_ops s3c_pm_ops = {
- .enter = s3c_pm_enter,
- .prepare = s3c_pm_prepare,
- .finish = s3c_pm_finish,
- .valid = suspend_valid_only_mem,
-};
-
-/* s3c_pm_init
- *
- * Attach the power management functions. This should be called
- * from the board specific initialisation if the board supports
- * it.
-*/
-
-int __init s3c_pm_init(void)
-{
- printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
-
- suspend_set_ops(&s3c_pm_ops);
- return 0;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2010 Ben Dooks <ben-linux@fluff.org>
-//
-// Support for wakeup mask interrupts on newer SoCs
-
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/device.h>
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <plat/wakeup-mask.h>
-#include <plat/pm.h>
-
-void samsung_sync_wakemask(void __iomem *reg,
- const struct samsung_wakeup_mask *mask, int nr_mask)
-{
- struct irq_data *data;
- u32 val;
-
- val = __raw_readl(reg);
-
- for (; nr_mask > 0; nr_mask--, mask++) {
- if (mask->irq == NO_WAKEUP_IRQ) {
- val |= mask->bit;
- continue;
- }
-
- data = irq_get_irq_data(mask->irq);
-
- /* bit of a liberty to read this directly from irq_data. */
- if (irqd_is_wakeup_set(data))
- val &= ~mask->bit;
- else
- val |= mask->bit;
- }
-
- printk(KERN_INFO "wakemask %08x => %08x\n", __raw_readl(reg), val);
- __raw_writel(val, reg);
-}
projects / linux-2.6-microblaze.git / commitdiff