--- 4.3 Using C++ for host programs
--- 4.4 Controlling compiler options for host programs
--- 4.5 When host programs are actually built
- --- 4.6 Using hostprogs-$(CONFIG_FOO)
=== 5 Kbuild clean infrastructure
Two steps are required in order to use a host executable.
The first step is to tell kbuild that a host program exists. This is
-done utilising the variable hostprogs-y.
+done utilising the variable "hostprogs".
The second step is to add an explicit dependency to the executable.
This can be done in two ways. Either add the dependency in a rule,
-or utilise the variable $(always).
+or utilise the variable "always-y".
Both possibilities are described in the following.
4.1 Simple Host Program
Example::
- hostprogs-y := bin2hex
+ hostprogs := bin2hex
Kbuild assumes in the above example that bin2hex is made from a single
c-source file named bin2hex.c located in the same directory as
Example::
#scripts/lxdialog/Makefile
- hostprogs-y := lxdialog
+ hostprogs := lxdialog
lxdialog-objs := checklist.o lxdialog.o
Objects with extension .o are compiled from the corresponding .c
Example::
#scripts/kconfig/Makefile
- hostprogs-y := qconf
+ hostprogs := qconf
qconf-cxxobjs := qconf.o
In the example above the executable is composed of the C++ file
Example::
#scripts/kconfig/Makefile
- hostprogs-y := qconf
+ hostprogs := qconf
qconf-cxxobjs := qconf.o
qconf-objs := check.o
Example::
#drivers/pci/Makefile
- hostprogs-y := gen-devlist
+ hostprogs := gen-devlist
$(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist
( cd $(obj); ./gen-devlist ) < $<
$(obj)/gen-devlist is updated. Note that references to
the host programs in special rules must be prefixed with $(obj).
- (2) Use $(always)
+ (2) Use always-y
When there is no suitable special rule, and the host program
- shall be built when a makefile is entered, the $(always)
+ shall be built when a makefile is entered, the always-y
variable shall be used.
Example::
#scripts/lxdialog/Makefile
- hostprogs-y := lxdialog
- always := $(hostprogs-y)
+ hostprogs := lxdialog
+ always-y := $(hostprogs)
This will tell kbuild to build lxdialog even if not referenced in
any rule.
-4.6 Using hostprogs-$(CONFIG_FOO)
----------------------------------
-
- A typical pattern in a Kbuild file looks like this:
-
- Example::
-
- #scripts/Makefile
- hostprogs-$(CONFIG_KALLSYMS) += kallsyms
-
- Kbuild knows about both 'y' for built-in and 'm' for module.
- So if a config symbol evaluates to 'm', kbuild will still build
- the binary. In other words, Kbuild handles hostprogs-m exactly
- like hostprogs-y. But only hostprogs-y is recommended to be used
- when no CONFIG symbols are involved.
-
5 Kbuild clean infrastructure
=============================
"make clean" deletes most generated files in the obj tree where the kernel
is compiled. This includes generated files such as host programs.
-Kbuild knows targets listed in $(hostprogs-y), $(hostprogs-m), $(always),
-$(extra-y) and $(targets). They are all deleted during "make clean".
-Files matching the patterns "*.[oas]", "*.ko", plus some additional files
-generated by kbuild are deleted all over the kernel src tree when
-"make clean" is executed.
+Kbuild knows targets listed in $(hostprogs), $(always-y), $(always-m),
+$(always-), $(extra-y), $(extra-) and $(targets). They are all deleted
+during "make clean". Files matching the patterns "*.[oas]", "*.ko", plus
+some additional files generated by kbuild are deleted all over the kernel
+source tree when "make clean" is executed.
Additional files or directories can be specified in kbuild makefiles by use of
$(clean-files).
bounds-file := include/generated/bounds.h
-always := $(bounds-file)
+always-y := $(bounds-file)
targets := kernel/bounds.s
$(bounds-file): kernel/bounds.s FORCE
offsets-file := include/generated/asm-offsets.h
-always += $(offsets-file)
+always-y += $(offsets-file)
targets += arch/$(SRCARCH)/kernel/asm-offsets.s
arch/$(SRCARCH)/kernel/asm-offsets.s: $(timeconst-file) $(bounds-file)
#####
# Check for missing system calls
-always += missing-syscalls
+always-y += missing-syscalls
quiet_cmd_syscalls = CALL $<
cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags)
#####
# Check atomic headers are up-to-date
-always += old-atomics
+always-y += old-atomics
quiet_cmd_atomics = CALL $<
cmd_atomics = $(CONFIG_SHELL) $<
# Copyright (C) 1994 by Linus Torvalds
#
-hostprogs-y := tools/mkbb tools/objstrip
+hostprogs := tools/mkbb tools/objstrip
targets := vmlinux.gz vmlinux \
vmlinux.nh tools/lxboot tools/bootlx tools/bootph \
tools/bootpzh bootloader bootpheader bootpzheader
ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32
include $(srctree)/lib/vdso/Makefile
-hostprogs-y := vdsomunge
+hostprogs := vdsomunge
obj-vdso := vgettimeofday.o datapage.o note.o
# Borrow vdsomunge.c from the arm vDSO
# We have to use a relative path because scripts/Makefile.host prefixes
-# $(hostprogs-y) with $(obj)
+# $(hostprogs) with $(obj)
munge := ../../../arm/vdso/vdsomunge
-hostprogs-y := $(munge)
+hostprogs := $(munge)
c-obj-vdso := note.o
c-obj-vdso-gettimeofday := vgettimeofday.o
drop-sections := .reginfo .mdebug .comment .note .pdr .options .MIPS.options
strip-flags := $(addprefix --remove-section=,$(drop-sections))
-hostprogs-y := elf2ecoff
+hostprogs := elf2ecoff
suffix-y := bin
suffix-$(CONFIG_KERNEL_BZIP2) := bz2
HOSTCFLAGS_calc_vmlinuz_load_addr.o += $(LINUXINCLUDE)
# Calculate the load address of the compressed kernel image
-hostprogs-y := calc_vmlinuz_load_addr
+hostprogs := calc_vmlinuz_load_addr
ifneq ($(zload-y),)
VMLINUZ_LOAD_ADDRESS := $(zload-y)
endif
# elf2ecoff can only handle 32bit image
-hostprogs-y += ../elf2ecoff
+hostprogs += ../elf2ecoff
ifdef CONFIG_32BIT
VMLINUZ = vmlinuz
# SPDX-License-Identifier: GPL-2.0
-hostprogs-y += relocs
+hostprogs += relocs
relocs-objs += relocs_32.o
relocs-objs += relocs_64.o
relocs-objs += relocs_main.o
# SPDX-License-Identifier: GPL-2.0
-hostprogs-y := elf-entry
+hostprogs := elf-entry
PHONY += elf-entry
elf-entry: $(obj)/elf-entry
@:
-hostprogs-$(CONFIG_CPU_LOONGSON3_WORKAROUNDS) += loongson3-llsc-check
+hostprogs += loongson3-llsc-check
PHONY += loongson3-llsc-check
loongson3-llsc-check: $(obj)/loongson3-llsc-check
@:
$(obj)/%.so.raw: $(obj)/%.so.dbg.raw FORCE
$(call if_changed,objcopy)
-hostprogs-y := genvdso
+hostprogs := genvdso
quiet_cmd_genvdso = GENVDSO $@
define cmd_genvdso
$(obj)/wrapper.a: $(obj-wlib) FORCE
$(call if_changed,bootar)
-hostprogs-y := addnote hack-coff mktree
+hostprogs := addnote hack-coff mktree
targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
INSTALL := install
extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
-hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y))
+hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs))
wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts))
kapi: $(kapi-hdrs-y)
-hostprogs-y += gen_facilities
-hostprogs-y += gen_opcode_table
+hostprogs += gen_facilities
+hostprogs += gen_opcode_table
HOSTCFLAGS_gen_facilities.o += $(LINUXINCLUDE)
ROOT_IMG := /usr/src/root.img
ELFTOAOUT := elftoaout
-hostprogs-y := piggyback
+hostprogs := piggyback
targets := tftpboot.img image zImage vmlinux.aout
clean-files := System.map
$(call if_changed,vdso)
HOST_EXTRACFLAGS += -I$(srctree)/tools/include
-hostprogs-y += vdso2c
+hostprogs += vdso2c
quiet_cmd_vdso2c = VDSO2C $@
cmd_vdso2c = $(obj)/vdso2c $< $(<:%.dbg=%) $@
setup-y += video-bios.o
targets += $(setup-y)
-hostprogs-y := tools/build
-hostprogs-$(CONFIG_X86_FEATURE_NAMES) += mkcpustr
+hostprogs := tools/build
+hostprogs += mkcpustr
HOST_EXTRACFLAGS += -I$(srctree)/tools/include \
-include include/generated/autoconf.h \
endif
LDFLAGS_vmlinux := -T
-hostprogs-y := mkpiggy
+hostprogs := mkpiggy
HOST_EXTRACFLAGS += -I$(srctree)/tools/include
sed-voffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(_text\|__bss_start\|_end\)$$/\#define VO_\2 _AC(0x\1,UL)/p'
$(call if_changed,vdso_and_check)
HOST_EXTRACFLAGS += -I$(srctree)/tools/include -I$(srctree)/include/uapi -I$(srctree)/arch/$(SUBARCH)/include/uapi
-hostprogs-y += vdso2c
+hostprogs += vdso2c
quiet_cmd_vdso2c = VDSO2C $@
cmd_vdso2c = $(obj)/vdso2c $< $(<:%.dbg=%) $@
# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
KCOV_INSTRUMENT := n
-always := realmode.bin realmode.relocs
+always-y := realmode.bin realmode.relocs
wakeup-objs := wakeup_asm.o wakemain.o video-mode.o
wakeup-objs += copy.o bioscall.o regs.o
$(call cmd,posttest)
$(call cmd,sanitytest)
-hostprogs-y += insn_decoder_test insn_sanity
+hostprogs += insn_decoder_test insn_sanity
# -I needed for generated C source and C source which in the kernel tree.
HOSTCFLAGS_insn_decoder_test.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/uapi/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/uapi/
$(obj)/insn_sanity.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
HOST_EXTRACFLAGS += -I$(srctree)/tools/include
-hostprogs-y += relocs
+hostprogs += relocs
relocs-objs := relocs_32.o relocs_64.o relocs_common.o
PHONY += relocs
relocs: $(obj)/relocs
ccflags-y := -Idrivers/gpu/drm/amd/include
-hostprogs-y := mkregtable
+hostprogs := mkregtable
clean-files := rn50_reg_safe.h r100_reg_safe.h r200_reg_safe.h rv515_reg_safe.h r300_reg_safe.h r420_reg_safe.h rs600_reg_safe.h r600_reg_safe.h evergreen_reg_safe.h cayman_reg_safe.h
quiet_cmd_mkregtable = MKREGTABLE $@
# Files generated that shall be removed upon make clean
clean-files := consolemap_deftbl.c defkeymap.c
-hostprogs-y += conmakehash
+hostprogs += conmakehash
quiet_cmd_conmk = CONMK $@
cmd_conmk = $(obj)/conmakehash $< > $@
# How to generate logo's
-hostprogs-y := pnmtologo
+hostprogs := pnmtologo
# Create commands like "pnmtologo -t mono -n logo_mac_mono -o ..."
quiet_cmd_logo = LOGO $@
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_ZORRO_NAMES) += names.o
-hostprogs-y := gen-devlist
+hostprogs := gen-devlist
# Files generated that shall be removed upon make clean
clean-files := devlist.h
endif
targets += utf8data.h
-hostprogs-y += mkutf8data
+hostprogs += mkutf8data
obj-$(CONFIG_FONT_SUPPORT) += fonts/
-hostprogs-y := gen_crc32table
-hostprogs-y += gen_crc64table
+hostprogs := gen_crc32table
+hostprogs += gen_crc64table
clean-files := crc32table.h
clean-files += crc64table.h
raid6_pq-$(CONFIG_KERNEL_MODE_NEON) += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o
raid6_pq-$(CONFIG_S390) += s390vx8.o recov_s390xc.o
-hostprogs-y += mktables
+hostprogs += mktables
ifeq ($(CONFIG_ALTIVEC),y)
altivec_flags := -maltivec $(call cc-option,-mabi=altivec)
# Makefile for the Linux BPFILTER layer.
#
-hostprogs-y := bpfilter_umh
+hostprogs := bpfilter_umh
bpfilter_umh-objs := main.o
KBUILD_HOSTCFLAGS += -I $(srctree)/tools/include/ -I $(srctree)/tools/include/uapi
HOSTCC := $(CC)
hbm-objs := bpf_load.o hbm.o $(CGROUP_HELPERS)
# Tell kbuild to always build the programs
-always := $(tprogs-y)
-always += sockex1_kern.o
-always += sockex2_kern.o
-always += sockex3_kern.o
-always += tracex1_kern.o
-always += tracex2_kern.o
-always += tracex3_kern.o
-always += tracex4_kern.o
-always += tracex5_kern.o
-always += tracex6_kern.o
-always += tracex7_kern.o
-always += sock_flags_kern.o
-always += test_probe_write_user_kern.o
-always += trace_output_kern.o
-always += tcbpf1_kern.o
-always += tc_l2_redirect_kern.o
-always += lathist_kern.o
-always += offwaketime_kern.o
-always += spintest_kern.o
-always += map_perf_test_kern.o
-always += test_overhead_tp_kern.o
-always += test_overhead_raw_tp_kern.o
-always += test_overhead_kprobe_kern.o
-always += parse_varlen.o parse_simple.o parse_ldabs.o
-always += test_cgrp2_tc_kern.o
-always += xdp1_kern.o
-always += xdp2_kern.o
-always += xdp_router_ipv4_kern.o
-always += test_current_task_under_cgroup_kern.o
-always += trace_event_kern.o
-always += sampleip_kern.o
-always += lwt_len_hist_kern.o
-always += xdp_tx_iptunnel_kern.o
-always += test_map_in_map_kern.o
-always += tcp_synrto_kern.o
-always += tcp_rwnd_kern.o
-always += tcp_bufs_kern.o
-always += tcp_cong_kern.o
-always += tcp_iw_kern.o
-always += tcp_clamp_kern.o
-always += tcp_basertt_kern.o
-always += tcp_tos_reflect_kern.o
-always += tcp_dumpstats_kern.o
-always += xdp_redirect_kern.o
-always += xdp_redirect_map_kern.o
-always += xdp_redirect_cpu_kern.o
-always += xdp_monitor_kern.o
-always += xdp_rxq_info_kern.o
-always += xdp2skb_meta_kern.o
-always += syscall_tp_kern.o
-always += cpustat_kern.o
-always += xdp_adjust_tail_kern.o
-always += xdp_fwd_kern.o
-always += task_fd_query_kern.o
-always += xdp_sample_pkts_kern.o
-always += ibumad_kern.o
-always += hbm_out_kern.o
-always += hbm_edt_kern.o
-always += xdpsock_kern.o
+always-y := $(tprogs-y)
+always-y += sockex1_kern.o
+always-y += sockex2_kern.o
+always-y += sockex3_kern.o
+always-y += tracex1_kern.o
+always-y += tracex2_kern.o
+always-y += tracex3_kern.o
+always-y += tracex4_kern.o
+always-y += tracex5_kern.o
+always-y += tracex6_kern.o
+always-y += tracex7_kern.o
+always-y += sock_flags_kern.o
+always-y += test_probe_write_user_kern.o
+always-y += trace_output_kern.o
+always-y += tcbpf1_kern.o
+always-y += tc_l2_redirect_kern.o
+always-y += lathist_kern.o
+always-y += offwaketime_kern.o
+always-y += spintest_kern.o
+always-y += map_perf_test_kern.o
+always-y += test_overhead_tp_kern.o
+always-y += test_overhead_raw_tp_kern.o
+always-y += test_overhead_kprobe_kern.o
+always-y += parse_varlen.o parse_simple.o parse_ldabs.o
+always-y += test_cgrp2_tc_kern.o
+always-y += xdp1_kern.o
+always-y += xdp2_kern.o
+always-y += xdp_router_ipv4_kern.o
+always-y += test_current_task_under_cgroup_kern.o
+always-y += trace_event_kern.o
+always-y += sampleip_kern.o
+always-y += lwt_len_hist_kern.o
+always-y += xdp_tx_iptunnel_kern.o
+always-y += test_map_in_map_kern.o
+always-y += tcp_synrto_kern.o
+always-y += tcp_rwnd_kern.o
+always-y += tcp_bufs_kern.o
+always-y += tcp_cong_kern.o
+always-y += tcp_iw_kern.o
+always-y += tcp_clamp_kern.o
+always-y += tcp_basertt_kern.o
+always-y += tcp_tos_reflect_kern.o
+always-y += tcp_dumpstats_kern.o
+always-y += xdp_redirect_kern.o
+always-y += xdp_redirect_map_kern.o
+always-y += xdp_redirect_cpu_kern.o
+always-y += xdp_monitor_kern.o
+always-y += xdp_rxq_info_kern.o
+always-y += xdp2skb_meta_kern.o
+always-y += syscall_tp_kern.o
+always-y += cpustat_kern.o
+always-y += xdp_adjust_tail_kern.o
+always-y += xdp_fwd_kern.o
+always-y += task_fd_query_kern.o
+always-y += xdp_sample_pkts_kern.o
+always-y += ibumad_kern.o
+always-y += hbm_out_kern.o
+always-y += hbm_edt_kern.o
+always-y += xdpsock_kern.o
ifeq ($(ARCH), arm)
# Strip all except -D__LINUX_ARM_ARCH__ option needed to handle linux
obj-$(CONFIG_SAMPLE_CONNECTOR) += cn_test.o
# List of programs to build
-ifdef CONFIG_SAMPLE_CONNECTOR
-hostprogs-y := ucon
-endif
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
+hostprogs := ucon
+always-y := $(hostprogs)
HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include
# SPDX-License-Identifier: GPL-2.0
# List of programs to build
-hostprogs-y := hid-example
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
+hostprogs := hid-example
+always-y := $(hostprogs)
HOSTCFLAGS_hid-example.o += -I$(objtree)/usr/include
# SPDX-License-Identifier: GPL-2.0
# Copyright (c) 2012-2019, Intel Corporation. All rights reserved.
-hostprogs-y := mei-amt-version
+hostprogs := mei-amt-version
HOSTCFLAGS_mei-amt-version.o += -I$(objtree)/usr/include
-always := $(hostprogs-y)
+always-y := $(hostprogs)
all: mei-amt-version
# SPDX-License-Identifier: GPL-2.0
-hostprogs-y := pidfd-metadata
-always := $(hostprogs-y)
+hostprogs := pidfd-metadata
+always-y := $(hostprogs)
HOSTCFLAGS_pidfd-metadata.o += -I$(objtree)/usr/include
all: pidfd-metadata
# SPDX-License-Identifier: GPL-2.0
ifndef CROSS_COMPILE
-hostprogs-y := bpf-fancy dropper bpf-direct user-trap
+hostprogs := bpf-fancy dropper bpf-direct user-trap
HOSTCFLAGS_bpf-fancy.o += -I$(objtree)/usr/include
HOSTCFLAGS_bpf-fancy.o += -idirafter $(objtree)/include
HOSTLDLIBS_dropper += $(MFLAG)
HOSTLDLIBS_user-trap += $(MFLAG)
endif
-always := $(hostprogs-y)
+always-y := $(hostprogs)
endif
# SPDX-License-Identifier: GPL-2.0-only
# List of programs to build
-hostprogs-y := uhid-example
+hostprogs := uhid-example
# Tell kbuild to always build the programs
-always := $(hostprogs-y)
+always-y := $(hostprogs)
HOSTCFLAGS_uhid-example.o += -I$(objtree)/usr/include
# SPDX-License-Identifier: GPL-2.0-only
# List of programs to build
-hostprogs-y := \
+hostprogs := \
test-fsmount \
test-statx
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
+always-y := $(hostprogs)
HOSTCFLAGS_test-fsmount.o += -I$(objtree)/usr/include
HOSTCFLAGS_test-statx.o += -I$(objtree)/usr/include
HOST_EXTRACFLAGS += -I$(srctree)/tools/include
-hostprogs-$(CONFIG_BUILD_BIN2C) += bin2c
-hostprogs-$(CONFIG_KALLSYMS) += kallsyms
-hostprogs-$(BUILD_C_RECORDMCOUNT) += recordmcount
-hostprogs-$(CONFIG_BUILDTIME_TABLE_SORT) += sorttable
-hostprogs-$(CONFIG_ASN1) += asn1_compiler
-hostprogs-$(CONFIG_MODULE_SIG_FORMAT) += sign-file
-hostprogs-$(CONFIG_SYSTEM_TRUSTED_KEYRING) += extract-cert
-hostprogs-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE) += insert-sys-cert
+always-$(CONFIG_BUILD_BIN2C) += bin2c
+always-$(CONFIG_KALLSYMS) += kallsyms
+always-$(BUILD_C_RECORDMCOUNT) += recordmcount
+always-$(CONFIG_BUILDTIME_TABLE_SORT) += sorttable
+always-$(CONFIG_ASN1) += asn1_compiler
+always-$(CONFIG_MODULE_SIG_FORMAT) += sign-file
+always-$(CONFIG_SYSTEM_TRUSTED_KEYRING) += extract-cert
+always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE) += insert-sys-cert
HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
HOSTLDLIBS_sorttable = -lpthread
endif
-always := $(hostprogs-y) $(hostprogs-m)
+hostprogs := $(always-y) $(always-m)
-# The following hostprogs-y programs are only build on demand
-hostprogs-y += unifdef
+# The following programs are only built on demand
+hostprogs += unifdef
subdir-$(CONFIG_GCC_PLUGINS) += gcc-plugins
subdir-$(CONFIG_MODVERSIONS) += genksyms
lib-y :=
lib-m :=
always :=
+always-y :=
+always-m :=
targets :=
subdir-y :=
subdir-m :=
include scripts/Makefile.lib
# Do not include host rules unless needed
-ifneq ($(hostprogs-y)$(hostprogs-m)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(hostcxxlibs-m),)
+ifneq ($(hostprogs)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(hostcxxlibs-m),)
include scripts/Makefile.host
endif
$(call if_changed_rule,as_o_S)
targets += $(filter-out $(subdir-obj-y), $(real-obj-y)) $(real-obj-m) $(lib-y)
-targets += $(extra-y) $(MAKECMDGOALS) $(always)
+targets += $(extra-y) $(always-y) $(MAKECMDGOALS)
# Linker scripts preprocessor (.lds.S -> .lds)
# ---------------------------------------------------------------------------
__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
$(if $(KBUILD_MODULES),$(obj-m) $(mod-targets) $(modorder-target)) \
- $(subdir-ym) $(always)
+ $(subdir-ym) $(always-y)
@:
endif
# directory
__clean-files := $(extra-y) $(extra-m) $(extra-) \
- $(always) $(targets) $(clean-files) \
- $(hostprogs-y) $(hostprogs-m) $(hostprogs-) \
+ $(always) $(always-y) $(always-m) $(always-) $(targets) $(clean-files) \
+ $(hostprogs) $(hostprogs-y) $(hostprogs-m) $(hostprogs-) \
$(hostlibs-y) $(hostlibs-m) $(hostlibs-) \
$(hostcxxlibs-y) $(hostcxxlibs-m)
# Both C and C++ are supported, but preferred language is C for such utilities.
#
# Sample syntax (see Documentation/kbuild/makefiles.rst for reference)
-# hostprogs-y := bin2hex
+# hostprogs := bin2hex
# Will compile bin2hex.c and create an executable named bin2hex
#
-# hostprogs-y := lxdialog
+# hostprogs := lxdialog
# lxdialog-objs := checklist.o lxdialog.o
# Will compile lxdialog.c and checklist.c, and then link the executable
# lxdialog, based on checklist.o and lxdialog.o
#
-# hostprogs-y := qconf
+# hostprogs := qconf
# qconf-cxxobjs := qconf.o
# qconf-objs := menu.o
# Will compile qconf as a C++ program, and menu as a C program.
# They are linked as C++ code to the executable qconf
-__hostprogs := $(sort $(hostprogs-y) $(hostprogs-m))
+__hostprogs := $(sort $(hostprogs))
host-cshlib := $(sort $(hostlibs-y) $(hostlibs-m))
host-cxxshlib := $(sort $(hostcxxlibs-y) $(hostcxxlibs-m))
ccflags-y += $(EXTRA_CFLAGS)
cppflags-y += $(EXTRA_CPPFLAGS)
ldflags-y += $(EXTRA_LDFLAGS)
+always-y += $(always)
+hostprogs += $(hostprogs-y) $(hostprogs-m)
# flags that take effect in current and sub directories
KBUILD_AFLAGS += $(subdir-asflags-y)
real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
+always-y += $(always-m)
+
# DTB
# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
extra-y += $(dtb-y)
# Add subdir path
extra-y := $(addprefix $(obj)/,$(extra-y))
-always := $(addprefix $(obj)/,$(always))
+always-y := $(addprefix $(obj)/,$(always-y))
targets := $(addprefix $(obj)/,$(targets))
modorder := $(addprefix $(obj)/,$(modorder))
obj-m := $(addprefix $(obj)/,$(obj-m))
#
# fixdep: used to generate dependency information during build process
-hostprogs-y := fixdep
-always := $(hostprogs-y)
+hostprogs := fixdep
+always-y := $(hostprogs)
# SPDX-License-Identifier: GPL-2.0
# scripts/dtc makefile
-hostprogs-$(CONFIG_DTC) := dtc
-always := $(hostprogs-y)
+hostprogs := dtc
+always-$(CONFIG_DTC) := $(hostprogs)
dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
srcpos.o checks.o util.o
targets = randomize_layout_seed.h randomize_layout_hash.h
$(HOSTLIBS)-y := $(foreach p,$(GCC_PLUGIN),$(if $(findstring /,$(p)),,$(p)))
-always := $($(HOSTLIBS)-y)
+always-y := $($(HOSTLIBS)-y)
$(foreach p,$($(HOSTLIBS)-y:%.so=%),$(eval $(p)-objs := $(p).o))
# SPDX-License-Identifier: GPL-2.0
-hostprogs-y := genksyms
-always := $(hostprogs-y)
+hostprogs := genksyms
+always-y := $(hostprogs)
genksyms-objs := genksyms.o parse.tab.o lex.lex.o
HOSTCFLAGS_parser.tab.o := -I $(srctree)/$(src)
# conf: Used for defconfig, oldconfig and related targets
-hostprogs-y += conf
+hostprogs += conf
conf-objs := conf.o $(common-objs)
# nconf: Used for the nconfig target based on ncurses
-hostprogs-y += nconf
+hostprogs += nconf
nconf-objs := nconf.o nconf.gui.o $(common-objs)
HOSTLDLIBS_nconf = $(shell . $(obj)/nconf-cfg && echo $$libs)
$(obj)/nconf.o $(obj)/nconf.gui.o: $(obj)/nconf-cfg
# mconf: Used for the menuconfig target based on lxdialog
-hostprogs-y += mconf
+hostprogs += mconf
lxdialog := $(addprefix lxdialog/, \
checklist.o inputbox.o menubox.o textbox.o util.o yesno.o)
mconf-objs := mconf.o $(lxdialog) $(common-objs)
$(addprefix $(obj)/, mconf.o $(lxdialog)): $(obj)/mconf-cfg
# qconf: Used for the xconfig target based on Qt
-hostprogs-y += qconf
+hostprogs += qconf
qconf-cxxobjs := qconf.o
qconf-objs := images.o $(common-objs)
$(call cmd,moc)
# gconf: Used for the gconfig target based on GTK+
-hostprogs-y += gconf
+hostprogs += gconf
gconf-objs := gconf.o images.o $(common-objs)
HOSTLDLIBS_gconf = $(shell . $(obj)/gconf-cfg && echo $$libs)
# SPDX-License-Identifier: GPL-2.0
OBJECT_FILES_NON_STANDARD := y
-hostprogs-y := modpost mk_elfconfig
-always := $(hostprogs-y) empty.o
+hostprogs := modpost mk_elfconfig
+always-y := $(hostprogs) empty.o
modpost-objs := modpost.o file2alias.o sumversion.o
# SPDX-License-Identifier: GPL-2.0
-hostprogs-y := genheaders
+hostprogs := genheaders
HOST_EXTRACFLAGS += \
-I$(srctree)/include/uapi -I$(srctree)/include \
-I$(srctree)/security/selinux/include
-always := $(hostprogs-y)
+always-y := $(hostprogs)
# SPDX-License-Identifier: GPL-2.0
-hostprogs-y := mdp
+hostprogs := mdp
HOST_EXTRACFLAGS += \
-I$(srctree)/include/uapi -I$(srctree)/include \
-I$(srctree)/security/selinux/include -I$(objtree)/include
-always := $(hostprogs-y)
+always-y := $(hostprogs)
clean-files := policy.* file_contexts
cpio-data := $(obj)/initramfs_data.cpio
-hostprogs-y := gen_init_cpio
+hostprogs := gen_init_cpio
# .initramfs_data.cpio.d is used to identify all files included
# in initramfs and to detect if any files are added/removed.
projects / linux-2.6-microblaze.git / commitdiff