--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/can-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN Controller Generic Binding
+
+maintainers:
+ - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+ $nodename:
+ pattern: "^can(@.*)?$"
+
+additionalProperties: true
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+ Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
+
+maintainers:
+ - Marc Kleine-Budde <mkl@pengutronix.de>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx8qm-flexcan
+ - fsl,imx8mp-flexcan
+ - fsl,imx6q-flexcan
+ - fsl,imx53-flexcan
+ - fsl,imx35-flexcan
+ - fsl,imx28-flexcan
+ - fsl,imx25-flexcan
+ - fsl,p1010-flexcan
+ - fsl,vf610-flexcan
+ - fsl,ls1021ar2-flexcan
+ - fsl,lx2160ar1-flexcan
+ - items:
+ - enum:
+ - fsl,imx7d-flexcan
+ - fsl,imx6ul-flexcan
+ - fsl,imx6sx-flexcan
+ - const: fsl,imx6q-flexcan
+ - items:
+ - enum:
+ - fsl,ls1028ar1-flexcan
+ - const: fsl,lx2160ar1-flexcan
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: per
+
+ clock-frequency:
+ description: |
+ The oscillator frequency driving the flexcan device, filled in by the
+ boot loader. This property should only be used the used operating system
+ doesn't support the clocks and clock-names property.
+
+ xceiver-supply:
+ description: Regulator that powers the CAN transceiver.
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ This means the registers of FlexCAN controller are big endian. This is
+ optional property.i.e. if this property is not present in device tree
+ node then controller is assumed to be little endian. If this property is
+ present then controller is assumed to be big endian.
+
+ fsl,stop-mode:
+ description: |
+ Register bits of stop mode control.
+
+ The format should be as follows:
+ <gpr req_gpr req_bit>
+ gpr is the phandle to general purpose register node.
+ req_gpr is the gpr register offset of CAN stop request.
+ req_bit is the bit offset of CAN stop request.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - description: The 'gpr' is the phandle to general purpose register node.
+ - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+ maximum: 0xff
+ - description: The 'req_bit' is the bit offset of CAN stop request.
+ maximum: 0x1f
+
+ fsl,clk-source:
+ description: |
+ Select the clock source to the CAN Protocol Engine (PE). It's SoC
+ implementation dependent. Refer to RM for detailed definition. If this
+ property is not set in device tree node then driver selects clock source 1
+ by default.
+ 0: clock source 0 (oscillator clock)
+ 1: clock source 1 (peripheral clock)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 1
+ minimum: 0
+ maximum: 1
+
+ wakeup-source:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable CAN remote wakeup.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ can@1c000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1c000 0x1000>;
+ interrupts = <48 0x2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <200000000>;
+ fsl,clk-source = <0>;
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ can@2090000 {
+ compatible = "fsl,imx6q-flexcan";
+ reg = <0x02090000 0x4000>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 1>, <&clks 2>;
+ clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x34 28>;
+ };
+++ /dev/null
-Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
-
-Required properties:
-
-- compatible : Should be "fsl,<processor>-flexcan"
-
- where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
- vf610, ls1021ar2, lx2160ar1, ls1028ar1.
-
- The ls1028ar1 must be followed by lx2160ar1, e.g.
- - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
-
- An implementation should also claim any of the following compatibles
- that it is fully backwards compatible with:
-
- - fsl,p1010-flexcan
-
-- reg : Offset and length of the register set for this device
-- interrupts : Interrupt tuple for this device
-
-Optional properties:
-
-- clock-frequency : The oscillator frequency driving the flexcan device
-
-- xceiver-supply: Regulator that powers the CAN transceiver
-
-- big-endian: This means the registers of FlexCAN controller are big endian.
- This is optional property.i.e. if this property is not present in
- device tree node then controller is assumed to be little endian.
- if this property is present then controller is assumed to be big
- endian.
-
-- fsl,stop-mode: register bits of stop mode control, the format is
- <&gpr req_gpr req_bit>.
- gpr is the phandle to general purpose register node.
- req_gpr is the gpr register offset of CAN stop request.
- req_bit is the bit offset of CAN stop request.
-
-- fsl,clk-source: Select the clock source to the CAN Protocol Engine (PE).
- It's SoC Implementation dependent. Refer to RM for detailed
- definition. If this property is not set in device tree node
- then driver selects clock source 1 by default.
- 0: clock source 0 (oscillator clock)
- 1: clock source 1 (peripheral clock)
-
-- wakeup-source: enable CAN remote wakeup
-
-Example:
-
- can@1c000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1c000 0x1000>;
- interrupts = <48 0x2>;
- interrupt-parent = <&mpic>;
- clock-frequency = <200000000>; // filled in by bootloader
- fsl,clk-source = <0>; // select clock source 0 for PE
- };
SAE J1939 defines a higher layer protocol on CAN. It implements a more
sophisticated addressing scheme and extends the maximum packet size above 8
bytes. Several derived specifications exist, which differ from the original
-J1939 on the application level, like MilCAN A, NMEA2000 and especially
+J1939 on the application level, like MilCAN A, NMEA2000, and especially
ISO-11783 (ISOBUS). This last one specifies the so-called ETP (Extended
-Transport Protocol) which is has been included in this implementation. This
+Transport Protocol), which has been included in this implementation. This
results in a maximum packet size of ((2 ^ 24) - 1) * 7 bytes == 111 MiB.
Specifications used
addressing and transport methods used by J1939.
* **Addressing:** when a process on an ECU communicates via J1939, it should
- not necessarily know its source address. Although at least one process per
+ not necessarily know its source address. Although, at least one process per
ECU should know the source address. Other processes should be able to reuse
that address. This way, address parameters for different processes
cooperating for the same ECU, are not duplicated. This way of working is
- closely related to the UNIX concept where programs do just one thing, and do
+ closely related to the UNIX concept, where programs do just one thing and do
it well.
* **Dynamic addressing:** Address Claiming in J1939 is time critical.
- Furthermore data transport should be handled properly during the address
+ Furthermore, data transport should be handled properly during the address
negotiation. Putting this functionality in the kernel eliminates it as a
requirement for _every_ user space process that communicates via J1939. This
results in a consistent J1939 bus with proper addressing.
The J1939 sockets operate on CAN network devices (see SocketCAN). Any J1939
user space library operating on CAN raw sockets will still operate properly.
-Since such library does not communicate with the in-kernel implementation, care
+Since such a library does not communicate with the in-kernel implementation, care
must be taken that these two do not interfere. In practice, this means they
cannot share ECU addresses. A single ECU (or virtual ECU) address is used by
the library exclusively, or by the in-kernel system exclusively.
8 bits : PS (PDU Specific)
In J1939-21 distinction is made between PDU1 format (where PF < 240) and PDU2
-format (where PF >= 240). Furthermore, when using PDU2 format, the PS-field
+format (where PF >= 240). Furthermore, when using the PDU2 format, the PS-field
contains a so-called Group Extension, which is part of the PGN. When using PDU2
format, the Group Extension is set in the PS-field.
On the other hand, when using PDU1 format, the PS-field contains a so-called
Destination Address, which is _not_ part of the PGN. When communicating a PGN
-from user space to kernel (or visa versa) and PDU2 format is used, the PS-field
+from user space to kernel (or vice versa) and PDU2 format is used, the PS-field
of the PGN shall be set to zero. The Destination Address shall be set
elsewhere.
Both static and dynamic addressing methods can be used.
-For static addresses, no extra checks are made by the kernel, and provided
+For static addresses, no extra checks are made by the kernel and provided
addresses are considered right. This responsibility is for the OEM or system
integrator.
For dynamic addressing, so-called Address Claiming, extra support is foreseen
-in the kernel. In J1939 any ECU is known by it's 64-bit NAME. At the moment of
+in the kernel. In J1939 any ECU is known by its 64-bit NAME. At the moment of
a successful address claim, the kernel keeps track of both NAME and source
address being claimed. This serves as a base for filter schemes. By default,
-packets with a destination that is not locally, will be rejected.
+packets with a destination that is not locally will be rejected.
Mixed mode packets (from a static to a dynamic address or vice versa) are
allowed. The BSD sockets define separate API calls for getting/setting the
---------
On CAN, you first need to open a socket for communicating over a CAN network.
-To use J1939, #include <linux/can/j1939.h>. From there, <linux/can.h> will be
+To use J1939, ``#include <linux/can/j1939.h>``. From there, ``<linux/can.h>`` will be
included too. To open a socket, use:
.. code-block:: C
s = socket(PF_CAN, SOCK_DGRAM, CAN_J1939);
-J1939 does use SOCK_DGRAM sockets. In the J1939 specification, connections are
+J1939 does use ``SOCK_DGRAM`` sockets. In the J1939 specification, connections are
mentioned in the context of transport protocol sessions. These still deliver
-packets to the other end (using several CAN packets). SOCK_STREAM is not
+packets to the other end (using several CAN packets). ``SOCK_STREAM`` is not
supported.
-After the successful creation of the socket, you would normally use the bind(2)
-and/or connect(2) system call to bind the socket to a CAN interface. After
-binding and/or connecting the socket, you can read(2) and write(2) from/to the
-socket or use send(2), sendto(2), sendmsg(2) and the recv*() counterpart
+After the successful creation of the socket, you would normally use the ``bind(2)``
+and/or ``connect(2)`` system call to bind the socket to a CAN interface. After
+binding and/or connecting the socket, you can ``read(2)`` and ``write(2)`` from/to the
+socket or use ``send(2)``, ``sendto(2)``, ``sendmsg(2)`` and the ``recv*()`` counterpart
operations on the socket as usual. There are also J1939 specific socket options
described below.
-In order to send data, a bind(2) must have been successful. bind(2) assigns a
+In order to send data, a ``bind(2)`` must have been successful. ``bind(2)`` assigns a
local address to a socket.
-Different from CAN is that the payload data is just the data that get send,
-without it's header info. The header info is derived from the sockaddr supplied
-to bind(2), connect(2), sendto(2) and recvfrom(2). A write(2) with size 4 will
+Different from CAN is that the payload data is just the data that get sends,
+without its header info. The header info is derived from the sockaddr supplied
+to ``bind(2)``, ``connect(2)``, ``sendto(2)`` and ``recvfrom(2)``. A ``write(2)`` with size 4 will
result in a packet with 4 bytes.
The sockaddr structure has extensions for use with J1939 as specified below:
} can_addr;
}
-can_family & can_ifindex serve the same purpose as for other SocketCAN sockets.
+``can_family`` & ``can_ifindex`` serve the same purpose as for other SocketCAN sockets.
-can_addr.j1939.pgn specifies the PGN (max 0x3ffff). Individual bits are
+``can_addr.j1939.pgn`` specifies the PGN (max 0x3ffff). Individual bits are
specified above.
-can_addr.j1939.name contains the 64-bit J1939 NAME.
+``can_addr.j1939.name`` contains the 64-bit J1939 NAME.
-can_addr.j1939.addr contains the address.
+``can_addr.j1939.addr`` contains the address.
-The bind(2) system call assigns the local address, i.e. the source address when
-sending packages. If a PGN during bind(2) is set, it's used as a RX filter.
-I.e. only packets with a matching PGN are received. If an ADDR or NAME is set
+The ``bind(2)`` system call assigns the local address, i.e. the source address when
+sending packages. If a PGN during ``bind(2)`` is set, it's used as a RX filter.
+I.e. only packets with a matching PGN are received. If an ADDR or NAME is set
it is used as a receive filter, too. It will match the destination NAME or ADDR
of the incoming packet. The NAME filter will work only if appropriate Address
Claiming for this name was done on the CAN bus and registered/cached by the
kernel.
-On the other hand connect(2) assigns the remote address, i.e. the destination
-address. The PGN from connect(2) is used as the default PGN when sending
+On the other hand ``connect(2)`` assigns the remote address, i.e. the destination
+address. The PGN from ``connect(2)`` is used as the default PGN when sending
packets. If ADDR or NAME is set it will be used as the default destination ADDR
-or NAME. Further a set ADDR or NAME during connect(2) is used as a receive
+or NAME. Further a set ADDR or NAME during ``connect(2)`` is used as a receive
filter. It will match the source NAME or ADDR of the incoming packet.
-Both write(2) and send(2) will send a packet with local address from bind(2) and
-the remote address from connect(2). Use sendto(2) to overwrite the destination
+Both ``write(2)`` and ``send(2)`` will send a packet with local address from ``bind(2)`` and the
+remote address from ``connect(2)``. Use ``sendto(2)`` to overwrite the destination
address.
-If can_addr.j1939.name is set (!= 0) the NAME is looked up by the kernel and
-the corresponding ADDR is used. If can_addr.j1939.name is not set (== 0),
-can_addr.j1939.addr is used.
+If ``can_addr.j1939.name`` is set (!= 0) the NAME is looked up by the kernel and
+the corresponding ADDR is used. If ``can_addr.j1939.name`` is not set (== 0),
+``can_addr.j1939.addr`` is used.
When creating a socket, reasonable defaults are set. Some options can be
-modified with setsockopt(2) & getsockopt(2).
+modified with ``setsockopt(2)`` & ``getsockopt(2)``.
RX path related options:
-- SO_J1939_FILTER - configure array of filters
-- SO_J1939_PROMISC - disable filters set by bind(2) and connect(2)
+- ``SO_J1939_FILTER`` - configure array of filters
+- ``SO_J1939_PROMISC`` - disable filters set by ``bind(2)`` and ``connect(2)``
By default no broadcast packets can be send or received. To enable sending or
-receiving broadcast packets use the socket option SO_BROADCAST:
+receiving broadcast packets use the socket option ``SO_BROADCAST``:
.. code-block:: C
+---------------------------+
TX path related options:
-SO_J1939_SEND_PRIO - change default send priority for the socket
+``SO_J1939_SEND_PRIO`` - change default send priority for the socket
Message Flags during send() and Related System Calls
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-send(2), sendto(2) and sendmsg(2) take a 'flags' argument. Currently
+``send(2)``, ``sendto(2)`` and ``sendmsg(2)`` take a 'flags' argument. Currently
supported flags are:
-* MSG_DONTWAIT, i.e. non-blocking operation.
+* ``MSG_DONTWAIT``, i.e. non-blocking operation.
recvmsg(2)
^^^^^^^^^^
-In most cases recvmsg(2) is needed if you want to extract more information than
-recvfrom(2) can provide. For example package priority and timestamp. The
+In most cases ``recvmsg(2)`` is needed if you want to extract more information than
+``recvfrom(2)`` can provide. For example package priority and timestamp. The
Destination Address, name and packet priority (if applicable) are attached to
-the msghdr in the recvmsg(2) call. They can be extracted using cmsg(3) macros,
-with cmsg_level == SOL_J1939 && cmsg_type == SCM_J1939_DEST_ADDR,
-SCM_J1939_DEST_NAME or SCM_J1939_PRIO. The returned data is a uint8_t for
-priority and dst_addr, and uint64_t for dst_name.
+the msghdr in the ``recvmsg(2)`` call. They can be extracted using ``cmsg(3)`` macros,
+with ``cmsg_level == SOL_J1939 && cmsg_type == SCM_J1939_DEST_ADDR``,
+``SCM_J1939_DEST_NAME`` or ``SCM_J1939_PRIO``. The returned data is a ``uint8_t`` for
+``priority`` and ``dst_addr``, and ``uint64_t`` for ``dst_name``.
.. code-block:: C
Distinction has to be made between using the claimed address and doing an
address claim. To use an already claimed address, one has to fill in the
-j1939.name member and provide it to bind(2). If the name had claimed an address
+``j1939.name`` member and provide it to ``bind(2)``. If the name had claimed an address
earlier, all further messages being sent will use that address. And the
-j1939.addr member will be ignored.
+``j1939.addr`` member will be ignored.
An exception on this is PGN 0x0ee00. This is the "Address Claim/Cannot Claim
-Address" message and the kernel will use the j1939.addr member for that PGN if
+Address" message and the kernel will use the ``j1939.addr`` member for that PGN if
necessary.
To claim an address following code example can be used:
If another ECU claims the address, the kernel will mark the NAME-SA expired.
No socket bound to the NAME can send packets (other than address claims). To
-claim another address, some socket bound to NAME, must bind(2) again, but with
-only j1939.addr changed to the new SA, and must then send a valid address claim
+claim another address, some socket bound to NAME, must ``bind(2)`` again, but with
+only ``j1939.addr`` changed to the new SA, and must then send a valid address claim
packet. This restarts the state machine in the kernel (and any other
participant on the bus) for this NAME.
-can-utils also include the jacd tool, so it can be used as code example or as
+``can-utils`` also include the ``j1939acd`` tool, so it can be used as code example or as
default Address Claiming daemon.
Send Examples
bind(sock, (struct sockaddr *)&baddr, sizeof(baddr));
-Now, the socket 'sock' is bound to the SA 0x20. Since no connect(2) was called,
-at this point we can use only sendto(2) or sendmsg(2).
+Now, the socket 'sock' is bound to the SA 0x20. Since no ``connect(2)`` was called,
+at this point we can use only ``sendto(2)`` or ``sendmsg(2)``.
Send:
.can_family = AF_CAN,
.can_addr.j1939 = {
.name = J1939_NO_NAME;
- .pgn = 0x30,
- .addr = 0x12300,
+ .addr = 0x30,
+ .pgn = 0x12300,
},
};
*/
struct sk_buff *skb = priv->echo_skb[idx];
struct canfd_frame *cf = (struct canfd_frame *)skb->data;
- u8 len = cf->len;
- *len_ptr = len;
+ /* get the real payload length for netdev statistics */
+ if (cf->can_id & CAN_RTR_FLAG)
+ *len_ptr = 0;
+ else
+ *len_ptr = cf->len;
+
priv->echo_skb[idx] = NULL;
return skb;
if (!skb)
return 0;
- netif_rx(skb);
+ skb_get(skb);
+ if (netif_rx(skb) == NET_RX_SUCCESS)
+ dev_consume_skb_any(skb);
+ else
+ dev_kfree_skb_any(skb);
return len;
}
* MX8MP FlexCAN3 03.00.17.01 yes yes no yes yes yes
* VF610 FlexCAN3 ? no yes no yes yes? no
* LS1021A FlexCAN2 03.00.04.00 no yes no no yes no
- * LX2160A FlexCAN3 03.00.23.00 no yes no no yes yes
+ * LX2160A FlexCAN3 03.00.23.00 no yes no yes yes yes
*
* Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
*/
static const struct flexcan_devtype_data fsl_vf610_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP |
- FLEXCAN_QUIRK_BROKEN_PERR_STATE,
+ FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SUPPORT_ECC,
};
static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
- FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
- FLEXCAN_QUIRK_USE_OFF_TIMESTAMP,
+ FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP,
};
static const struct flexcan_devtype_data fsl_lx2160a_r1_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
- FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD,
+ FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD |
+ FLEXCAN_QUIRK_SUPPORT_ECC,
};
static const struct can_bittiming_const flexcan_bittiming_const = {
{
struct net_device *dev = platform_get_drvdata(pdev);
+ device_set_wakeup_enable(&pdev->dev, false);
+ device_set_wakeup_capable(&pdev->dev, false);
unregister_flexcandev(dev);
pm_runtime_disable(&pdev->dev);
free_candev(dev);
cf_len = get_can_dlc(pucan_msg_get_dlc(msg));
/* if this frame is an echo, */
- if ((rx_msg_flags & PUCAN_MSG_LOOPED_BACK) &&
- !(rx_msg_flags & PUCAN_MSG_SELF_RECEIVE)) {
+ if (rx_msg_flags & PUCAN_MSG_LOOPED_BACK) {
unsigned long flags;
spin_lock_irqsave(&priv->echo_lock, flags);
netif_wake_queue(priv->ndev);
spin_unlock_irqrestore(&priv->echo_lock, flags);
- return 0;
+
+ /* if this frame is only an echo, stop here. Otherwise,
+ * continue to push this application self-received frame into
+ * its own rx queue.
+ */
+ if (!(rx_msg_flags & PUCAN_MSG_SELF_RECEIVE))
+ return 0;
}
/* otherwise, it should be pushed into rx fifo */
if (skb_queue_len(&offload->skb_queue) >
offload->skb_queue_len_max) {
- kfree_skb(skb);
+ dev_kfree_skb_any(skb);
return -ENOBUFS;
}
{
if (skb_queue_len(&offload->skb_queue) >
offload->skb_queue_len_max) {
- kfree_skb(skb);
+ dev_kfree_skb_any(skb);
return -ENOBUFS;
}
{
switch (model) {
case MCP251XFD_MODEL_MCP2517FD:
- return "MCP2517FD"; break;
+ return "MCP2517FD";
case MCP251XFD_MODEL_MCP2518FD:
- return "MCP2518FD"; break;
+ return "MCP2518FD";
case MCP251XFD_MODEL_MCP251XFD:
- return "MCP251xFD"; break;
+ return "MCP251xFD";
}
return "<unknown>";
{
switch (mode) {
case MCP251XFD_REG_CON_MODE_MIXED:
- return "Mixed (CAN FD/CAN 2.0)"; break;
+ return "Mixed (CAN FD/CAN 2.0)";
case MCP251XFD_REG_CON_MODE_SLEEP:
- return "Sleep"; break;
+ return "Sleep";
case MCP251XFD_REG_CON_MODE_INT_LOOPBACK:
- return "Internal Loopback"; break;
+ return "Internal Loopback";
case MCP251XFD_REG_CON_MODE_LISTENONLY:
- return "Listen Only"; break;
+ return "Listen Only";
case MCP251XFD_REG_CON_MODE_CONFIG:
- return "Configuration"; break;
+ return "Configuration";
case MCP251XFD_REG_CON_MODE_EXT_LOOPBACK:
- return "External Loopback"; break;
+ return "External Loopback";
case MCP251XFD_REG_CON_MODE_CAN2_0:
- return "CAN 2.0"; break;
+ return "CAN 2.0";
case MCP251XFD_REG_CON_MODE_RESTRICTED:
- return "Restricted Operation"; break;
+ return "Restricted Operation";
}
return "<unknown>";
memcpy(&buf_tx->cmd, reg, sizeof(buf_tx->cmd));
if (MCP251XFD_SANITIZE_SPI)
memset(buf_tx->data, 0x0, val_len);
- };
+ }
err = spi_sync(spi, &msg);
if (err)
goto out;
}
- netdev_dbg(priv->ndev,
- "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x) retrying.\n",
- reg, val_len, (int)val_len, buf_rx->data,
- get_unaligned_be16(buf_rx->data + val_len));
- }
-
- if (err) {
netdev_info(priv->ndev,
- "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x).\n",
+ "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x) retrying.\n",
reg, val_len, (int)val_len, buf_rx->data,
get_unaligned_be16(buf_rx->data + val_len));
+ }
+
+ if (err) {
+ netdev_err(priv->ndev,
+ "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x).\n",
+ reg, val_len, (int)val_len, buf_rx->data,
+ get_unaligned_be16(buf_rx->data + val_len));
return err;
}
err = clk_prepare_enable(priv->clk);
if (err) {
dev_err(&pdev->dev, "clk_prepare_enable() failed\n");
- goto probe_exit_clk;
+ goto probe_exit_release_clk;
}
priv->offload.mailbox_read = ti_hecc_mailbox_read;
err = can_rx_offload_add_timestamp(ndev, &priv->offload);
if (err) {
dev_err(&pdev->dev, "can_rx_offload_add_timestamp() failed\n");
- goto probe_exit_clk;
+ goto probe_exit_disable_clk;
}
err = register_candev(ndev);
probe_exit_offload:
can_rx_offload_del(&priv->offload);
-probe_exit_clk:
+probe_exit_disable_clk:
+ clk_disable_unprepare(priv->clk);
+probe_exit_release_clk:
clk_put(priv->clk);
probe_exit_candev:
free_candev(ndev);
/* protect from getting time before setting now */
if (ktime_to_ns(time_ref->tv_host)) {
u64 delta_us;
+ s64 delta_ts = 0;
+
+ /* General case: dev_ts_1 < dev_ts_2 < ts, with:
+ *
+ * - dev_ts_1 = previous sync timestamp
+ * - dev_ts_2 = last sync timestamp
+ * - ts = event timestamp
+ * - ts_period = known sync period (theoretical)
+ * ~ dev_ts2 - dev_ts1
+ * *but*:
+ *
+ * - time counters wrap (see adapter->ts_used_bits)
+ * - sometimes, dev_ts_1 < ts < dev_ts2
+ *
+ * "normal" case (sync time counters increase):
+ * must take into account case when ts wraps (tsw)
+ *
+ * < ts_period > < >
+ * | | |
+ * ---+--------+----+-------0-+--+-->
+ * ts_dev_1 | ts_dev_2 |
+ * ts tsw
+ */
+ if (time_ref->ts_dev_1 < time_ref->ts_dev_2) {
+ /* case when event time (tsw) wraps */
+ if (ts < time_ref->ts_dev_1)
+ delta_ts = 1 << time_ref->adapter->ts_used_bits;
+
+ /* Otherwise, sync time counter (ts_dev_2) has wrapped:
+ * handle case when event time (tsn) hasn't.
+ *
+ * < ts_period > < >
+ * | | |
+ * ---+--------+--0-+---------+--+-->
+ * ts_dev_1 | ts_dev_2 |
+ * tsn ts
+ */
+ } else if (time_ref->ts_dev_1 < ts) {
+ delta_ts = -(1 << time_ref->adapter->ts_used_bits);
+ }
- delta_us = ts - time_ref->ts_dev_2;
- if (ts < time_ref->ts_dev_2)
- delta_us &= (1 << time_ref->adapter->ts_used_bits) - 1;
+ /* add delay between last sync and event timestamps */
+ delta_ts += (signed int)(ts - time_ref->ts_dev_2);
- delta_us += time_ref->ts_total;
+ /* add time from beginning to last sync */
+ delta_ts += time_ref->ts_total;
- delta_us *= time_ref->adapter->us_per_ts_scale;
+ /* convert ticks number into microseconds */
+ delta_us = delta_ts * time_ref->adapter->us_per_ts_scale;
delta_us >>= time_ref->adapter->us_per_ts_shift;
*time = ktime_add_us(time_ref->tv_host_0, delta_us);
struct pucan_msg *rx_msg)
{
struct pucan_rx_msg *rm = (struct pucan_rx_msg *)rx_msg;
- struct peak_usb_device *dev = usb_if->dev[pucan_msg_get_channel(rm)];
- struct net_device *netdev = dev->netdev;
+ struct peak_usb_device *dev;
+ struct net_device *netdev;
struct canfd_frame *cfd;
struct sk_buff *skb;
const u16 rx_msg_flags = le16_to_cpu(rm->flags);
+ if (pucan_msg_get_channel(rm) >= ARRAY_SIZE(usb_if->dev))
+ return -ENOMEM;
+
+ dev = usb_if->dev[pucan_msg_get_channel(rm)];
+ netdev = dev->netdev;
+
if (rx_msg_flags & PUCAN_MSG_EXT_DATA_LEN) {
/* CANFD frame case */
skb = alloc_canfd_skb(netdev, &cfd);
struct pucan_msg *rx_msg)
{
struct pucan_status_msg *sm = (struct pucan_status_msg *)rx_msg;
- struct peak_usb_device *dev = usb_if->dev[pucan_stmsg_get_channel(sm)];
- struct pcan_usb_fd_device *pdev =
- container_of(dev, struct pcan_usb_fd_device, dev);
+ struct pcan_usb_fd_device *pdev;
enum can_state new_state = CAN_STATE_ERROR_ACTIVE;
enum can_state rx_state, tx_state;
- struct net_device *netdev = dev->netdev;
+ struct peak_usb_device *dev;
+ struct net_device *netdev;
struct can_frame *cf;
struct sk_buff *skb;
+ if (pucan_stmsg_get_channel(sm) >= ARRAY_SIZE(usb_if->dev))
+ return -ENOMEM;
+
+ dev = usb_if->dev[pucan_stmsg_get_channel(sm)];
+ pdev = container_of(dev, struct pcan_usb_fd_device, dev);
+ netdev = dev->netdev;
+
/* nothing should be sent while in BUS_OFF state */
if (dev->can.state == CAN_STATE_BUS_OFF)
return 0;
struct pucan_msg *rx_msg)
{
struct pucan_error_msg *er = (struct pucan_error_msg *)rx_msg;
- struct peak_usb_device *dev = usb_if->dev[pucan_ermsg_get_channel(er)];
- struct pcan_usb_fd_device *pdev =
- container_of(dev, struct pcan_usb_fd_device, dev);
+ struct pcan_usb_fd_device *pdev;
+ struct peak_usb_device *dev;
+
+ if (pucan_ermsg_get_channel(er) >= ARRAY_SIZE(usb_if->dev))
+ return -EINVAL;
+
+ dev = usb_if->dev[pucan_ermsg_get_channel(er)];
+ pdev = container_of(dev, struct pcan_usb_fd_device, dev);
/* keep a trace of tx and rx error counters for later use */
pdev->bec.txerr = er->tx_err_cnt;
struct pucan_msg *rx_msg)
{
struct pcan_ufd_ovr_msg *ov = (struct pcan_ufd_ovr_msg *)rx_msg;
- struct peak_usb_device *dev = usb_if->dev[pufd_omsg_get_channel(ov)];
- struct net_device *netdev = dev->netdev;
+ struct peak_usb_device *dev;
+ struct net_device *netdev;
struct can_frame *cf;
struct sk_buff *skb;
+ if (pufd_omsg_get_channel(ov) >= ARRAY_SIZE(usb_if->dev))
+ return -EINVAL;
+
+ dev = usb_if->dev[pufd_omsg_get_channel(ov)];
+ netdev = dev->netdev;
+
/* allocate an skb to store the error frame */
skb = alloc_can_err_skb(netdev, &cf);
if (!skb)
u16 tx_msg_size, tx_msg_flags;
u8 can_dlc;
+ if (cfd->len > CANFD_MAX_DLEN)
+ return -EINVAL;
+
tx_msg_size = ALIGN(sizeof(struct pucan_tx_msg) + cfd->len, 4);
tx_msg->size = cpu_to_le16(tx_msg_size);
tx_msg->type = cpu_to_le16(PUCAN_MSG_CAN_TX);
if (ret < 0) {
netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
__func__, ret);
- return ret;
+ goto err;
}
ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags,
if (ret < 0) {
netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
__func__, ret);
+ pm_runtime_put(priv->dev);
return ret;
}
if (ret < 0) {
netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
__func__, ret);
- goto err_pmdisable;
+ goto err_disableclks;
}
if (priv->read_reg(priv, XCAN_SR_OFFSET) != XCAN_SR_CONFIG_MASK) {
err_disableclks:
pm_runtime_put(priv->dev);
-err_pmdisable:
pm_runtime_disable(&pdev->dev);
err_free:
free_candev(ndev);
priv->port_mtu[port] = new_mtu;
for (i = 0; i < QCA8K_NUM_PORTS; i++)
- if (priv->port_mtu[port] > mtu)
- mtu = priv->port_mtu[port];
+ if (priv->port_mtu[i] > mtu)
+ mtu = priv->port_mtu[i];
/* Include L2 header / FCS length */
qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, mtu + ETH_HLEN + ETH_FCS_LEN);
static int macb_pad_and_fcs(struct sk_buff **skb, struct net_device *ndev)
{
- bool cloned = skb_cloned(*skb) || skb_header_cloned(*skb);
+ bool cloned = skb_cloned(*skb) || skb_header_cloned(*skb) ||
+ skb_is_nonlinear(*skb);
int padlen = ETH_ZLEN - (*skb)->len;
int headroom = skb_headroom(*skb);
int tailroom = skb_tailroom(*skb);
{
if (likely(skb && !skb_shared(skb) && !skb_cloned(skb))) {
__skb_trim(skb, 0);
- refcount_add(2, &skb->users);
+ refcount_inc(&skb->users);
} else {
skb = alloc_skb(len, GFP_KERNEL | __GFP_NOFAIL);
}
if (ret)
goto out_notcb;
+ if (unlikely(csk_flag(sk, CSK_ABORT_SHUTDOWN)))
+ goto out_notcb;
+
set_wr_txq(skb, CPL_PRIORITY_DATA, csk->tlshws.txqid);
csk->wr_credits -= DIV_ROUND_UP(len, 16);
csk->wr_unacked += DIV_ROUND_UP(len, 16);
#define DPAA_PARSE_RESULTS_SIZE sizeof(struct fman_prs_result)
#define DPAA_TIME_STAMP_SIZE 8
#define DPAA_HASH_RESULTS_SIZE 8
+#define DPAA_HWA_SIZE (DPAA_PARSE_RESULTS_SIZE + DPAA_TIME_STAMP_SIZE \
+ + DPAA_HASH_RESULTS_SIZE)
+#define DPAA_RX_PRIV_DATA_DEFAULT_SIZE (DPAA_TX_PRIV_DATA_SIZE + \
+ dpaa_rx_extra_headroom)
#ifdef CONFIG_DPAA_ERRATUM_A050385
-#define DPAA_RX_PRIV_DATA_SIZE (DPAA_A050385_ALIGN - (DPAA_PARSE_RESULTS_SIZE\
- + DPAA_TIME_STAMP_SIZE + DPAA_HASH_RESULTS_SIZE))
+#define DPAA_RX_PRIV_DATA_A050385_SIZE (DPAA_A050385_ALIGN - DPAA_HWA_SIZE)
+#define DPAA_RX_PRIV_DATA_SIZE (fman_has_errata_a050385() ? \
+ DPAA_RX_PRIV_DATA_A050385_SIZE : \
+ DPAA_RX_PRIV_DATA_DEFAULT_SIZE)
#else
-#define DPAA_RX_PRIV_DATA_SIZE (u16)(DPAA_TX_PRIV_DATA_SIZE + \
- dpaa_rx_extra_headroom)
+#define DPAA_RX_PRIV_DATA_SIZE DPAA_RX_PRIV_DATA_DEFAULT_SIZE
#endif
#define DPAA_ETH_PCD_RXQ_NUM 128
return err;
}
-static inline u16 dpaa_get_headroom(struct dpaa_buffer_layout *bl)
+static u16 dpaa_get_headroom(struct dpaa_buffer_layout *bl,
+ enum port_type port)
{
u16 headroom;
*
* Also make sure the headroom is a multiple of data_align bytes
*/
- headroom = (u16)(bl->priv_data_size + DPAA_PARSE_RESULTS_SIZE +
- DPAA_TIME_STAMP_SIZE + DPAA_HASH_RESULTS_SIZE);
+ headroom = (u16)(bl[port].priv_data_size + DPAA_HWA_SIZE);
- return ALIGN(headroom, DPAA_FD_DATA_ALIGNMENT);
+ if (port == RX)
+ return ALIGN(headroom, DPAA_FD_RX_DATA_ALIGNMENT);
+ else
+ return ALIGN(headroom, DPAA_FD_DATA_ALIGNMENT);
}
static int dpaa_eth_probe(struct platform_device *pdev)
goto free_dpaa_fqs;
}
- priv->tx_headroom = dpaa_get_headroom(&priv->buf_layout[TX]);
- priv->rx_headroom = dpaa_get_headroom(&priv->buf_layout[RX]);
+ priv->tx_headroom = dpaa_get_headroom(priv->buf_layout, TX);
+ priv->rx_headroom = dpaa_get_headroom(priv->buf_layout, RX);
/* All real interfaces need their ports initialized */
err = dpaa_eth_init_ports(mac_dev, dpaa_bp, &port_fqs,
*/
#define FEC_QUIRK_HAS_FRREG (1 << 16)
+/* Some FEC hardware blocks need the MMFR cleared at setup time to avoid
+ * the generation of an MII event. This must be avoided in the older
+ * FEC blocks where it will stop MII events being generated.
+ */
+#define FEC_QUIRK_CLEAR_SETUP_MII (1 << 17)
+
struct bufdesc_prop {
int qid;
/* Address of Rx and Tx buffers */
static const struct fec_devinfo fec_imx28_info = {
.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME |
FEC_QUIRK_SINGLE_MDIO | FEC_QUIRK_HAS_RACC |
- FEC_QUIRK_HAS_FRREG,
+ FEC_QUIRK_HAS_FRREG | FEC_QUIRK_CLEAR_SETUP_MII,
};
static const struct fec_devinfo fec_imx6q_info = {
.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
- FEC_QUIRK_HAS_RACC,
+ FEC_QUIRK_HAS_RACC | FEC_QUIRK_CLEAR_SETUP_MII,
};
static const struct fec_devinfo fec_mvf600_info = {
FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
FEC_QUIRK_HAS_VLAN | FEC_QUIRK_HAS_AVB |
FEC_QUIRK_ERR007885 | FEC_QUIRK_BUG_CAPTURE |
- FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE,
+ FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE |
+ FEC_QUIRK_CLEAR_SETUP_MII,
};
static const struct fec_devinfo fec_imx6ul_info = {
FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR007885 |
FEC_QUIRK_BUG_CAPTURE | FEC_QUIRK_HAS_RACC |
- FEC_QUIRK_HAS_COALESCE,
+ FEC_QUIRK_HAS_COALESCE | FEC_QUIRK_CLEAR_SETUP_MII,
};
static struct platform_device_id fec_devtype[] = {
if (suppress_preamble)
fep->phy_speed |= BIT(7);
- /* Clear MMFR to avoid to generate MII event by writing MSCR.
- * MII event generation condition:
- * - writing MSCR:
- * - mmfr[31:0]_not_zero & mscr[7:0]_is_zero &
- * mscr_reg_data_in[7:0] != 0
- * - writing MMFR:
- * - mscr[7:0]_not_zero
- */
- writel(0, fep->hwp + FEC_MII_DATA);
+ if (fep->quirks & FEC_QUIRK_CLEAR_SETUP_MII) {
+ /* Clear MMFR to avoid to generate MII event by writing MSCR.
+ * MII event generation condition:
+ * - writing MSCR:
+ * - mmfr[31:0]_not_zero & mscr[7:0]_is_zero &
+ * mscr_reg_data_in[7:0] != 0
+ * - writing MMFR:
+ * - mscr[7:0]_not_zero
+ */
+ writel(0, fep->hwp + FEC_MII_DATA);
+ }
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
fcb_len = GMAC_FCB_LEN + GMAC_TXPAL_LEN;
/* make space for additional header when fcb is needed */
- if (fcb_len && unlikely(skb_headroom(skb) < fcb_len)) {
- struct sk_buff *skb_new;
-
- skb_new = skb_realloc_headroom(skb, fcb_len);
- if (!skb_new) {
+ if (fcb_len) {
+ if (unlikely(skb_cow_head(skb, fcb_len))) {
dev->stats.tx_errors++;
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
-
- if (skb->sk)
- skb_set_owner_w(skb_new, skb->sk);
- dev_consume_skb_any(skb);
- skb = skb_new;
}
/* total number of fragments in the SKB */
if (dev->features & NETIF_F_IP_CSUM ||
priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER)
- dev->needed_headroom = GMAC_FCB_LEN;
+ dev->needed_headroom = GMAC_FCB_LEN + GMAC_TXPAL_LEN;
/* Initializing some of the rx/tx queue level parameters */
for (i = 0; i < priv->num_tx_queues; i++) {
if (adapter->state != VNIC_CLOSED) {
rc = ibmvnic_login(netdev);
if (rc)
- return rc;
+ goto out;
rc = init_resources(adapter);
if (rc) {
netdev_err(netdev, "failed to initialize resources\n");
release_resources(adapter);
- return rc;
+ goto out;
}
}
rc = __ibmvnic_open(netdev);
+out:
+ /*
+ * If open fails due to a pending failover, set device state and
+ * return. Device operation will be handled by reset routine.
+ */
+ if (rc && adapter->failover_pending) {
+ adapter->state = VNIC_OPEN;
+ rc = 0;
+ }
return rc;
}
rwi->reset_reason);
rtnl_lock();
+ /*
+ * Now that we have the rtnl lock, clear any pending failover.
+ * This will ensure ibmvnic_open() has either completed or will
+ * block until failover is complete.
+ */
+ if (rwi->reset_reason == VNIC_RESET_FAILOVER)
+ adapter->failover_pending = false;
netif_carrier_off(netdev);
adapter->reset_reason = rwi->reset_reason;
/* CHANGE_PARAM requestor holds rtnl_lock */
rc = do_change_param_reset(adapter, rwi, reset_state);
} else if (adapter->force_reset_recovery) {
+ /*
+ * Since we are doing a hard reset now, clear the
+ * failover_pending flag so we don't ignore any
+ * future MOBILITY or other resets.
+ */
+ adapter->failover_pending = false;
+
/* Transport event occurred during previous reset */
if (adapter->wait_for_reset) {
/* Previous was CHANGE_PARAM; caller locked */
unsigned long flags;
int ret;
+ /*
+ * If failover is pending don't schedule any other reset.
+ * Instead let the failover complete. If there is already a
+ * a failover reset scheduled, we will detect and drop the
+ * duplicate reset when walking the ->rwi_list below.
+ */
if (adapter->state == VNIC_REMOVING ||
adapter->state == VNIC_REMOVED ||
- adapter->failover_pending) {
+ (adapter->failover_pending && reason != VNIC_RESET_FAILOVER)) {
ret = EBUSY;
netdev_dbg(netdev, "Adapter removing or pending failover, skipping reset\n");
goto err;
case IBMVNIC_CRQ_INIT:
dev_info(dev, "Partner initialized\n");
adapter->from_passive_init = true;
- adapter->failover_pending = false;
if (!completion_done(&adapter->init_done)) {
complete(&adapter->init_done);
adapter->init_done_rc = -EIO;
ethtool_link_ksettings_zero_link_mode(ks, supported);
+ if (!idev->port_info) {
+ netdev_err(netdev, "port_info not initialized\n");
+ return -EOPNOTSUPP;
+ }
+
/* The port_info data is found in a DMA space that the NIC keeps
* up-to-date, so there's no need to request the data from the
* NIC, we already have it in our memory space.
return -EIO;
}
-static bool rtl_test_hw_pad_bug(struct rtl8169_private *tp, struct sk_buff *skb)
+static bool rtl_test_hw_pad_bug(struct rtl8169_private *tp)
{
- return skb->len < ETH_ZLEN && tp->mac_version == RTL_GIGA_MAC_VER_34;
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_34:
+ case RTL_GIGA_MAC_VER_60:
+ case RTL_GIGA_MAC_VER_61:
+ case RTL_GIGA_MAC_VER_63:
+ return true;
+ default:
+ return false;
+ }
}
static void rtl8169_tso_csum_v1(struct sk_buff *skb, u32 *opts)
opts[1] |= transport_offset << TCPHO_SHIFT;
} else {
- if (unlikely(rtl_test_hw_pad_bug(tp, skb)))
+ if (unlikely(skb->len < ETH_ZLEN && rtl_test_hw_pad_bug(tp)))
return !eth_skb_pad(skb);
}
if (ret)
return ret;
- if (plat->eee_usecs_rate > 0) {
- u32 tx_lpi_usec;
-
- tx_lpi_usec = (plat->eee_usecs_rate / 1000000) - 1;
- writel(tx_lpi_usec, res.addr + GMAC_1US_TIC_COUNTER);
- }
-
ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
if (ret < 0)
return ret;
res.wol_irq = pci_irq_vector(pdev, 0);
res.irq = pci_irq_vector(pdev, 0);
+ if (plat->eee_usecs_rate > 0) {
+ u32 tx_lpi_usec;
+
+ tx_lpi_usec = (plat->eee_usecs_rate / 1000000) - 1;
+ writel(tx_lpi_usec, res.addr + GMAC_1US_TIC_COUNTER);
+ }
+
ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
if (ret) {
pci_free_irq_vectors(pdev);
ch->priv_data = priv;
ch->index = queue;
+ spin_lock_init(&ch->lock);
if (queue < priv->plat->rx_queues_to_use) {
netif_napi_add(dev, &ch->rx_napi, stmmac_napi_poll_rx,
(1 << HWTSTAMP_TX_ON);
info->rx_filters =
(1 << HWTSTAMP_FILTER_NONE) |
- (1 << HWTSTAMP_FILTER_PTP_V1_L4_EVENT) |
(1 << HWTSTAMP_FILTER_PTP_V2_EVENT);
return 0;
}
break;
case HWTSTAMP_FILTER_ALL:
case HWTSTAMP_FILTER_NTP_ALL:
- return -ERANGE;
case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
- priv->rx_ts_enabled = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
- cfg.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
- break;
+ return -ERANGE;
case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
continue;
sfp->gpio_irq[i] = gpiod_to_irq(sfp->gpio[i]);
- if (!sfp->gpio_irq[i]) {
+ if (sfp->gpio_irq[i] < 0) {
+ sfp->gpio_irq[i] = 0;
sfp->need_poll = true;
continue;
}
{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */
{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1201, 2)}, /* Telit LE920, LE920A4 */
+ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1230, 2)}, /* Telit LE910Cx */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1260, 2)}, /* Telit LE910Cx */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1261, 2)}, /* Telit LE910Cx */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1900, 1)}, /* Telit LN940 series */
*/
static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb)
{
- if (skb_shared(skb)) {
- struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
+ struct sk_buff *nskb;
- if (likely(nskb)) {
- can_skb_set_owner(nskb, skb->sk);
- consume_skb(skb);
- return nskb;
- } else {
- kfree_skb(skb);
- return NULL;
- }
+ nskb = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!nskb)) {
+ kfree_skb(skb);
+ return NULL;
}
- /* we can assume to have an unshared skb with proper owner */
- return skb;
+ can_skb_set_owner(nskb, skb->sk);
+ consume_skb(skb);
+ return nskb;
}
#endif /* !_CAN_SKB_H */
const u_int16_t attr_count; /* number of nlattr's */
};
+enum nfnl_abort_action {
+ NFNL_ABORT_NONE = 0,
+ NFNL_ABORT_AUTOLOAD,
+ NFNL_ABORT_VALIDATE,
+};
+
struct nfnetlink_subsystem {
const char *name;
__u8 subsys_id; /* nfnetlink subsystem ID */
const struct nfnl_callback *cb; /* callback for individual types */
struct module *owner;
int (*commit)(struct net *net, struct sk_buff *skb);
- int (*abort)(struct net *net, struct sk_buff *skb, bool autoload);
+ int (*abort)(struct net *net, struct sk_buff *skb,
+ enum nfnl_abort_action action);
void (*cleanup)(struct net *net);
bool (*valid_genid)(struct net *net, u32 genid);
};
u_int32_t mark;
};
-int ip_route_me_harder(struct net *net, struct sk_buff *skb, unsigned addr_type);
+int ip_route_me_harder(struct net *net, struct sock *sk, struct sk_buff *skb, unsigned addr_type);
struct nf_queue_entry;
#if IS_MODULE(CONFIG_IPV6)
int (*chk_addr)(struct net *net, const struct in6_addr *addr,
const struct net_device *dev, int strict);
- int (*route_me_harder)(struct net *net, struct sk_buff *skb);
+ int (*route_me_harder)(struct net *net, struct sock *sk, struct sk_buff *skb);
int (*dev_get_saddr)(struct net *net, const struct net_device *dev,
const struct in6_addr *daddr, unsigned int srcprefs,
struct in6_addr *saddr);
#endif
}
-int ip6_route_me_harder(struct net *net, struct sk_buff *skb);
+int ip6_route_me_harder(struct net *net, struct sock *sk, struct sk_buff *skb);
-static inline int nf_ip6_route_me_harder(struct net *net, struct sk_buff *skb)
+static inline int nf_ip6_route_me_harder(struct net *net, struct sock *sk, struct sk_buff *skb)
{
#if IS_MODULE(CONFIG_IPV6)
const struct nf_ipv6_ops *v6_ops = nf_get_ipv6_ops();
if (!v6_ops)
return -EHOSTUNREACH;
- return v6_ops->route_me_harder(net, skb);
+ return v6_ops->route_me_harder(net, sk, skb);
#elif IS_BUILTIN(CONFIG_IPV6)
- return ip6_route_me_harder(net, skb);
+ return ip6_route_me_harder(net, sk, skb);
#else
return -EHOSTUNREACH;
#endif
enum cfg80211_station_type statype);
/**
- * enum station_info_rate_flags - bitrate info flags
+ * enum rate_info_flags - bitrate info flags
*
* Used by the driver to indicate the specific rate transmission
* type for 802.11n transmissions.
};
/**
- * enum station_info_rate_flags - bitrate info flags
+ * enum bss_param_flags - bitrate info flags
*
* Used by the driver to indicate the specific rate transmission
* type for 802.11n transmissions.
struct ieee80211_channel *channel, gfp_t gfp);
/**
- * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate
+ * cfg80211_notify_new_peer_candidate - notify cfg80211 of a new mesh peer
+ * candidate
*
* @dev: network device
* @macaddr: the MAC address of the new candidate
void cfg80211_unregister_wdev(struct wireless_dev *wdev);
/**
- * struct cfg80211_ft_event - FT Information Elements
+ * struct cfg80211_ft_event_params - FT Information Elements
* @ies: FT IEs
* @ies_len: length of the FT IE in bytes
* @target_ap: target AP's MAC address
};
/**
- * enum ieee80211_reconfig_complete_type - reconfig type
+ * enum ieee80211_reconfig_type - reconfig type
*
* This enum is used by the reconfig_complete() callback to indicate what
* reconfiguration type was completed.
int band, struct ieee80211_sta **sta);
/**
- * Sanity-check and parse the radiotap header of injected frames
+ * ieee80211_parse_tx_radiotap - Sanity-check and parse the radiotap header
+ * of injected frames
* @skb: packet injected by userspace
* @dev: the &struct device of this 802.11 device
*/
void ieee80211_update_p2p_noa(struct ieee80211_noa_data *data, u32 tsf);
/**
- * ieee80211_tdls_oper - request userspace to perform a TDLS operation
+ * ieee80211_tdls_oper_request - request userspace to perform a TDLS operation
* @vif: virtual interface
* @peer: the peer's destination address
* @oper: the requested TDLS operation
#define ICMPV6_HDR_FIELD 0
#define ICMPV6_UNK_NEXTHDR 1
#define ICMPV6_UNK_OPTION 2
+#define ICMPV6_HDR_INCOMP 3
/*
* constants for (set|get)sockopt
{
struct lec_state *state = seq->private;
- v = lec_get_idx(state, 1);
- *pos += !!PTR_ERR(v);
- return v;
+ ++*pos;
+ return lec_get_idx(state, 1);
}
static int lec_seq_show(struct seq_file *seq, void *v)
communication between CAN nodes via two defined CAN Identifiers.
As CAN frames can only transport a small amount of data bytes
(max. 8 bytes for 'classic' CAN and max. 64 bytes for CAN FD) this
- segmentation is needed to transport longer PDUs as needed e.g. for
- vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN traffic.
+ segmentation is needed to transport longer Protocol Data Units (PDU)
+ as needed e.g. for vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN
+ traffic.
This protocol driver implements data transfers according to
ISO 15765-2:2016 for 'classic' CAN and CAN FD frame types.
If you want to perform automotive vehicle diagnostic services (UDS),
static u8 padlen(u8 datalen)
{
- const u8 plen[] = {8, 8, 8, 8, 8, 8, 8, 8, 8, /* 0 - 8 */
- 12, 12, 12, 12, /* 9 - 12 */
- 16, 16, 16, 16, /* 13 - 16 */
- 20, 20, 20, 20, /* 17 - 20 */
- 24, 24, 24, 24, /* 21 - 24 */
- 32, 32, 32, 32, 32, 32, 32, 32, /* 25 - 32 */
- 48, 48, 48, 48, 48, 48, 48, 48, /* 33 - 40 */
- 48, 48, 48, 48, 48, 48, 48, 48}; /* 41 - 48 */
+ static const u8 plen[] = {
+ 8, 8, 8, 8, 8, 8, 8, 8, 8, /* 0 - 8 */
+ 12, 12, 12, 12, /* 9 - 12 */
+ 16, 16, 16, 16, /* 13 - 16 */
+ 20, 20, 20, 20, /* 17 - 20 */
+ 24, 24, 24, 24, /* 21 - 24 */
+ 32, 32, 32, 32, 32, 32, 32, 32, /* 25 - 32 */
+ 48, 48, 48, 48, 48, 48, 48, 48, /* 33 - 40 */
+ 48, 48, 48, 48, 48, 48, 48, 48 /* 41 - 48 */
+ };
if (datalen > 48)
return 64;
return 0;
}
- /* no creation of flow control frames */
- if (so->opt.flags & CAN_ISOTP_LISTEN_MODE)
- return 0;
-
/* perform blocksize handling, if enabled */
if (!so->rxfc.bs || ++so->rx.bs < so->rxfc.bs) {
/* start rx timeout watchdog */
return 0;
}
+ /* no creation of flow control frames */
+ if (so->opt.flags & CAN_ISOTP_LISTEN_MODE)
+ return 0;
+
/* we reached the specified blocksize so->rxfc.bs */
isotp_send_fc(sk, ae, ISOTP_FC_CTS);
return 0;
goto out_release_sock;
}
+ if (!(ndev->flags & IFF_UP)) {
+ dev_put(ndev);
+ ret = -ENETDOWN;
+ goto out_release_sock;
+ }
+
priv = j1939_netdev_start(ndev);
dev_put(ndev);
if (IS_ERR(priv)) {
*/
void can_remove_proc(struct net *net)
{
+ if (!net->can.proc_dir)
+ return;
+
if (net->can.pde_stats)
remove_proc_entry(CAN_PROC_STATS, net->can.proc_dir);
if (net->can.pde_rcvlist_sff)
remove_proc_entry(CAN_PROC_RCVLIST_SFF, net->can.proc_dir);
- if (net->can.proc_dir)
- remove_proc_entry("can", net->proc_net);
+ remove_proc_entry("can", net->proc_net);
}
ttl = ip4_dst_hoplimit(&rt->dst);
}
- if (!df && skb->protocol == htons(ETH_P_IP))
- df = inner_iph->frag_off & htons(IP_DF);
-
headroom += LL_RESERVED_SPACE(rt->dst.dev) + rt->dst.header_len;
if (headroom > dev->needed_headroom)
dev->needed_headroom = headroom;
#include <net/netfilter/nf_queue.h>
/* route_me_harder function, used by iptable_nat, iptable_mangle + ip_queue */
-int ip_route_me_harder(struct net *net, struct sk_buff *skb, unsigned int addr_type)
+int ip_route_me_harder(struct net *net, struct sock *sk, struct sk_buff *skb, unsigned int addr_type)
{
const struct iphdr *iph = ip_hdr(skb);
struct rtable *rt;
struct flowi4 fl4 = {};
__be32 saddr = iph->saddr;
- const struct sock *sk = skb_to_full_sk(skb);
- __u8 flags = sk ? inet_sk_flowi_flags(sk) : 0;
+ __u8 flags;
struct net_device *dev = skb_dst(skb)->dev;
unsigned int hh_len;
+ sk = sk_to_full_sk(sk);
+ flags = sk ? inet_sk_flowi_flags(sk) : 0;
+
if (addr_type == RTN_UNSPEC)
addr_type = inet_addr_type_dev_table(net, dev, saddr);
if (addr_type == RTN_LOCAL || addr_type == RTN_UNICAST)
iph->daddr != daddr ||
skb->mark != mark ||
iph->tos != tos) {
- err = ip_route_me_harder(state->net, skb, RTN_UNSPEC);
+ err = ip_route_me_harder(state->net, state->sk, skb, RTN_UNSPEC);
if (err < 0)
ret = NF_DROP_ERR(err);
}
ip4_dst_hoplimit(skb_dst(nskb)));
nf_reject_ip_tcphdr_put(nskb, oldskb, oth);
- if (ip_route_me_harder(net, nskb, RTN_UNSPEC))
+ if (ip_route_me_harder(net, nskb->sk, nskb, RTN_UNSPEC))
goto free_nskb;
niph = ip_hdr(nskb);
static struct xfrm_tunnel xfrm_tunnel_handler __read_mostly = {
.handler = xfrm_tunnel_rcv,
.err_handler = xfrm_tunnel_err,
- .priority = 3,
+ .priority = 4,
};
#if IS_ENABLED(CONFIG_IPV6)
static struct xfrm_tunnel xfrm64_tunnel_handler __read_mostly = {
.handler = xfrm_tunnel_rcv,
.err_handler = xfrm_tunnel_err,
- .priority = 2,
+ .priority = 3,
};
#endif
tp = skb_header_pointer(skb,
ptr+offsetof(struct icmp6hdr, icmp6_type),
sizeof(_type), &_type);
- if (!tp || !(*tp & ICMPV6_INFOMSG_MASK))
+
+ /* Based on RFC 8200, Section 4.5 Fragment Header, return
+ * false if this is a fragment packet with no icmp header info.
+ */
+ if (!tp && frag_off != 0)
+ return false;
+ else if (!tp || !(*tp & ICMPV6_INFOMSG_MASK))
return true;
}
return false;
if (max_headroom > dev->needed_headroom)
dev->needed_headroom = max_headroom;
+ skb_set_inner_ipproto(skb, proto);
+
err = ip6_tnl_encap(skb, t, &proto, fl6);
if (err)
return err;
ipv6_push_frag_opts(skb, &opt.ops, &proto);
}
- skb_set_inner_ipproto(skb, proto);
-
skb_push(skb, sizeof(struct ipv6hdr));
skb_reset_network_header(skb);
ipv6h = ipv6_hdr(skb);
#include <net/netfilter/ipv6/nf_defrag_ipv6.h>
#include "../bridge/br_private.h"
-int ip6_route_me_harder(struct net *net, struct sk_buff *skb)
+int ip6_route_me_harder(struct net *net, struct sock *sk_partial, struct sk_buff *skb)
{
const struct ipv6hdr *iph = ipv6_hdr(skb);
- struct sock *sk = sk_to_full_sk(skb->sk);
+ struct sock *sk = sk_to_full_sk(sk_partial);
unsigned int hh_len;
struct dst_entry *dst;
int strict = (ipv6_addr_type(&iph->daddr) &
if (!ipv6_addr_equal(&iph->daddr, &rt_info->daddr) ||
!ipv6_addr_equal(&iph->saddr, &rt_info->saddr) ||
skb->mark != rt_info->mark)
- return ip6_route_me_harder(entry->state.net, skb);
+ return ip6_route_me_harder(entry->state.net, entry->state.sk, skb);
}
return 0;
}
skb->mark != mark ||
ipv6_hdr(skb)->hop_limit != hop_limit ||
flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) {
- err = ip6_route_me_harder(state->net, skb);
+ err = ip6_route_me_harder(state->net, state->sk, skb);
if (err < 0)
ret = NF_DROP_ERR(err);
}
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/export.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
#include <net/sock.h>
#include <net/snmp.h>
struct frag_queue *fq;
const struct ipv6hdr *hdr = ipv6_hdr(skb);
struct net *net = dev_net(skb_dst(skb)->dev);
- int iif;
+ __be16 frag_off;
+ int iif, offset;
+ u8 nexthdr;
if (IP6CB(skb)->flags & IP6SKB_FRAGMENTED)
goto fail_hdr;
return 1;
}
+ /* RFC 8200, Section 4.5 Fragment Header:
+ * If the first fragment does not include all headers through an
+ * Upper-Layer header, then that fragment should be discarded and
+ * an ICMP Parameter Problem, Code 3, message should be sent to
+ * the source of the fragment, with the Pointer field set to zero.
+ */
+ nexthdr = hdr->nexthdr;
+ offset = ipv6_skip_exthdr(skb, skb_transport_offset(skb), &nexthdr, &frag_off);
+ if (offset >= 0) {
+ /* Check some common protocols' header */
+ if (nexthdr == IPPROTO_TCP)
+ offset += sizeof(struct tcphdr);
+ else if (nexthdr == IPPROTO_UDP)
+ offset += sizeof(struct udphdr);
+ else if (nexthdr == IPPROTO_ICMPV6)
+ offset += sizeof(struct icmp6hdr);
+ else
+ offset += 1;
+
+ if (!(frag_off & htons(IP6_OFFSET)) && offset > skb->len) {
+ __IP6_INC_STATS(net, __in6_dev_get_safely(skb->dev),
+ IPSTATS_MIB_INHDRERRORS);
+ icmpv6_param_prob(skb, ICMPV6_HDR_INCOMP, 0);
+ return -1;
+ }
+ }
+
iif = skb->dev ? skb->dev->ifindex : 0;
fq = fq_find(net, fhdr->identification, hdr, iif);
if (fq) {
static struct xfrm6_tunnel xfrm6_tunnel_handler __read_mostly = {
.handler = xfrm6_tunnel_rcv,
.err_handler = xfrm6_tunnel_err,
- .priority = 2,
+ .priority = 3,
};
static struct xfrm6_tunnel xfrm46_tunnel_handler __read_mostly = {
.handler = xfrm6_tunnel_rcv,
.err_handler = xfrm6_tunnel_err,
- .priority = 2,
+ .priority = 3,
};
static int __net_init xfrm6_tunnel_net_init(struct net *net)
struct cfg80211_assoc_request *req)
{
bool is_6ghz = req->bss->channel->band == NL80211_BAND_6GHZ;
+ bool is_5ghz = req->bss->channel->band == NL80211_BAND_5GHZ;
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_bss *bss = (void *)req->bss->priv;
if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
sizeof(struct ieee80211_vht_cap));
- else if (!is_6ghz)
+ else if (is_5ghz)
ifmgd->flags |= IEEE80211_STA_DISABLE_VHT |
IEEE80211_STA_DISABLE_HE;
rcu_read_unlock();
*/
void sta_info_free(struct ieee80211_local *local, struct sta_info *sta)
{
+ /*
+ * If we had used sta_info_pre_move_state() then we might not
+ * have gone through the state transitions down again, so do
+ * it here now (and warn if it's inserted).
+ *
+ * This will clear state such as fast TX/RX that may have been
+ * allocated during state transitions.
+ */
+ while (sta->sta_state > IEEE80211_STA_NONE) {
+ int ret;
+
+ WARN_ON_ONCE(test_sta_flag(sta, WLAN_STA_INSERTED));
+
+ ret = sta_info_move_state(sta, sta->sta_state - 1);
+ if (WARN_ONCE(ret, "sta_info_move_state() returned %d\n", ret))
+ break;
+ }
+
if (sta->rate_ctrl)
rate_control_free_sta(sta);
void sta_info_stop(struct ieee80211_local *local);
/**
- * sta_info_flush - flush matching STA entries from the STA table
+ * __sta_info_flush - flush matching STA entries from the STA table
*
* Returns the number of removed STA entries.
*
*/
int __sta_info_flush(struct ieee80211_sub_if_data *sdata, bool vlans);
+/**
+ * sta_info_flush - flush matching STA entries from the STA table
+ *
+ * Returns the number of removed STA entries.
+ *
+ * @sdata: sdata to remove all stations from
+ */
static inline int sta_info_flush(struct ieee80211_sub_if_data *sdata)
{
return __sta_info_flush(sdata, false);
/* device xmit handlers */
+enum ieee80211_encrypt {
+ ENCRYPT_NO,
+ ENCRYPT_MGMT,
+ ENCRYPT_DATA,
+};
+
static int ieee80211_skb_resize(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb,
- int head_need, bool may_encrypt)
+ int head_need,
+ enum ieee80211_encrypt encrypt)
{
struct ieee80211_local *local = sdata->local;
- struct ieee80211_hdr *hdr;
bool enc_tailroom;
int tail_need = 0;
- hdr = (struct ieee80211_hdr *) skb->data;
- enc_tailroom = may_encrypt &&
- (sdata->crypto_tx_tailroom_needed_cnt ||
- ieee80211_is_mgmt(hdr->frame_control));
+ enc_tailroom = encrypt == ENCRYPT_MGMT ||
+ (encrypt == ENCRYPT_DATA &&
+ sdata->crypto_tx_tailroom_needed_cnt);
if (enc_tailroom) {
tail_need = IEEE80211_ENCRYPT_TAILROOM;
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct ieee80211_hdr *hdr;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
int headroom;
- bool may_encrypt;
+ enum ieee80211_encrypt encrypt;
- may_encrypt = !(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT);
+ if (info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)
+ encrypt = ENCRYPT_NO;
+ else if (ieee80211_is_mgmt(hdr->frame_control))
+ encrypt = ENCRYPT_MGMT;
+ else
+ encrypt = ENCRYPT_DATA;
headroom = local->tx_headroom;
- if (may_encrypt)
+ if (encrypt != ENCRYPT_NO)
headroom += sdata->encrypt_headroom;
headroom -= skb_headroom(skb);
headroom = max_t(int, 0, headroom);
- if (ieee80211_skb_resize(sdata, skb, headroom, may_encrypt)) {
+ if (ieee80211_skb_resize(sdata, skb, headroom, encrypt)) {
ieee80211_free_txskb(&local->hw, skb);
return;
}
+ /* reload after potential resize */
hdr = (struct ieee80211_hdr *) skb->data;
info->control.vif = &sdata->vif;
head_need += sdata->encrypt_headroom;
head_need += local->tx_headroom;
head_need = max_t(int, 0, head_need);
- if (ieee80211_skb_resize(sdata, skb, head_need, true)) {
+ if (ieee80211_skb_resize(sdata, skb, head_need, ENCRYPT_DATA)) {
ieee80211_free_txskb(&local->hw, skb);
skb = NULL;
return ERR_PTR(-ENOMEM);
if (unlikely(ieee80211_skb_resize(sdata, skb,
max_t(int, extra_head + hw_headroom -
skb_headroom(skb), 0),
- false))) {
+ ENCRYPT_NO))) {
kfree_skb(skb);
return true;
}
tx.skb = skb;
tx.sdata = vif_to_sdata(info->control.vif);
- if (txq->sta && !(info->flags & IEEE80211_TX_CTL_INJECTED)) {
+ if (txq->sta) {
tx.sta = container_of(txq->sta, struct sta_info, sta);
/*
* Drop unicast frames to unauthorised stations unless they are
- * EAPOL frames from the local station.
+ * injected frames or EAPOL frames from the local station.
*/
- if (unlikely(ieee80211_is_data(hdr->frame_control) &&
+ if (unlikely(!(info->flags & IEEE80211_TX_CTL_INJECTED) &&
+ ieee80211_is_data(hdr->frame_control) &&
!ieee80211_vif_is_mesh(&tx.sdata->vif) &&
tx.sdata->vif.type != NL80211_IFTYPE_OCB &&
!is_multicast_ether_addr(hdr->addr1) &&
{
struct mptcp_sock *ret = NULL;
struct hlist_nulls_node *pos;
- int slot, num;
+ int slot, num = 0;
for (slot = *s_slot; slot <= token_mask; *s_num = 0, slot++) {
struct token_bucket *bucket = &token_hash[slot];
if (SET_WITH_COUNTER(set)) {
struct ip_set_counter *counter = ext_counter(data, set);
+ ip_set_update_counter(counter, ext, flags);
+
if (flags & IPSET_FLAG_MATCH_COUNTERS &&
!(ip_set_match_counter(ip_set_get_packets(counter),
mext->packets, mext->packets_op) &&
ip_set_match_counter(ip_set_get_bytes(counter),
mext->bytes, mext->bytes_op)))
return false;
- ip_set_update_counter(counter, ext, flags);
}
if (SET_WITH_SKBINFO(set))
ip_set_get_skbinfo(ext_skbinfo(data, set),
struct dst_entry *dst = skb_dst(skb);
if (dst->dev && !(dst->dev->flags & IFF_LOOPBACK) &&
- ip6_route_me_harder(ipvs->net, skb) != 0)
+ ip6_route_me_harder(ipvs->net, skb->sk, skb) != 0)
return 1;
} else
#endif
if (!(skb_rtable(skb)->rt_flags & RTCF_LOCAL) &&
- ip_route_me_harder(ipvs->net, skb, RTN_LOCAL) != 0)
+ ip_route_me_harder(ipvs->net, skb->sk, skb, RTN_LOCAL) != 0)
return 1;
return 0;
if (ct->tuplehash[dir].tuple.dst.u3.ip !=
ct->tuplehash[!dir].tuple.src.u3.ip) {
- err = ip_route_me_harder(state->net, skb, RTN_UNSPEC);
+ err = ip_route_me_harder(state->net, state->sk, skb, RTN_UNSPEC);
if (err < 0)
ret = NF_DROP_ERR(err);
}
if (!nf_inet_addr_cmp(&ct->tuplehash[dir].tuple.dst.u3,
&ct->tuplehash[!dir].tuple.src.u3)) {
- err = nf_ip6_route_me_harder(state->net, skb);
+ err = nf_ip6_route_me_harder(state->net, state->sk, skb);
if (err < 0)
ret = NF_DROP_ERR(err);
}
skb_dst_set_noref(nskb, skb_dst(skb));
nskb->protocol = htons(ETH_P_IP);
- if (ip_route_me_harder(net, nskb, RTN_UNSPEC))
+ if (ip_route_me_harder(net, nskb->sk, nskb, RTN_UNSPEC))
goto free_nskb;
if (nfct) {
GFP_KERNEL);
kfree(buf);
- if (ctx->report &&
+ if (!ctx->report &&
!nfnetlink_has_listeners(ctx->net, NFNLGRP_NFTABLES))
return;
audit_log_nfcfg("?:0;?:0", 0, net->nft.base_seq,
AUDIT_NFT_OP_GEN_REGISTER, GFP_KERNEL);
- if (nlmsg_report(nlh) &&
+ if (!nlmsg_report(nlh) &&
!nfnetlink_has_listeners(net, NFNLGRP_NFTABLES))
return;
kfree(trans);
}
-static int __nf_tables_abort(struct net *net, bool autoload)
+static int __nf_tables_abort(struct net *net, enum nfnl_abort_action action)
{
struct nft_trans *trans, *next;
struct nft_trans_elem *te;
struct nft_hook *hook;
+ if (action == NFNL_ABORT_VALIDATE &&
+ nf_tables_validate(net) < 0)
+ return -EAGAIN;
+
list_for_each_entry_safe_reverse(trans, next, &net->nft.commit_list,
list) {
switch (trans->msg_type) {
nf_tables_abort_release(trans);
}
- if (autoload)
+ if (action == NFNL_ABORT_AUTOLOAD)
nf_tables_module_autoload(net);
else
nf_tables_module_autoload_cleanup(net);
nft_validate_state_update(net, NFT_VALIDATE_SKIP);
}
-static int nf_tables_abort(struct net *net, struct sk_buff *skb, bool autoload)
+static int nf_tables_abort(struct net *net, struct sk_buff *skb,
+ enum nfnl_abort_action action)
{
- int ret = __nf_tables_abort(net, autoload);
+ int ret = __nf_tables_abort(net, action);
mutex_unlock(&net->nft.commit_mutex);
{
mutex_lock(&net->nft.commit_mutex);
if (!list_empty(&net->nft.commit_list))
- __nf_tables_abort(net, false);
+ __nf_tables_abort(net, NFNL_ABORT_NONE);
__nft_release_tables(net);
mutex_unlock(&net->nft.commit_mutex);
WARN_ON_ONCE(!list_empty(&net->nft.tables));
return netlink_ack(skb, nlh, -EINVAL, NULL);
replay:
status = 0;
-
+replay_abort:
skb = netlink_skb_clone(oskb, GFP_KERNEL);
if (!skb)
return netlink_ack(oskb, nlh, -ENOMEM, NULL);
}
done:
if (status & NFNL_BATCH_REPLAY) {
- ss->abort(net, oskb, true);
+ ss->abort(net, oskb, NFNL_ABORT_AUTOLOAD);
nfnl_err_reset(&err_list);
kfree_skb(skb);
module_put(ss->owner);
status |= NFNL_BATCH_REPLAY;
goto done;
} else if (err) {
- ss->abort(net, oskb, false);
+ ss->abort(net, oskb, NFNL_ABORT_NONE);
netlink_ack(oskb, nlmsg_hdr(oskb), err, NULL);
}
} else {
- ss->abort(net, oskb, false);
+ enum nfnl_abort_action abort_action;
+
+ if (status & NFNL_BATCH_FAILURE)
+ abort_action = NFNL_ABORT_NONE;
+ else
+ abort_action = NFNL_ABORT_VALIDATE;
+
+ err = ss->abort(net, oskb, abort_action);
+ if (err == -EAGAIN) {
+ nfnl_err_reset(&err_list);
+ kfree_skb(skb);
+ module_put(ss->owner);
+ status |= NFNL_BATCH_FAILURE;
+ goto replay_abort;
+ }
}
if (ss->cleanup)
ss->cleanup(net);
iph->daddr != daddr ||
skb->mark != mark ||
iph->tos != tos) {
- err = ip_route_me_harder(state->net, skb, RTN_UNSPEC);
+ err = ip_route_me_harder(state->net, state->sk, skb, RTN_UNSPEC);
if (err < 0)
ret = NF_DROP_ERR(err);
}
skb->mark != mark ||
ipv6_hdr(skb)->hop_limit != hop_limit ||
flowlabel != *((u32 *)ipv6_hdr(skb)))) {
- err = nf_ip6_route_me_harder(state->net, skb);
+ err = nf_ip6_route_me_harder(state->net, state->sk, skb);
if (err < 0)
ret = NF_DROP_ERR(err);
}
skb->mark == rt_info->mark &&
iph->daddr == rt_info->daddr &&
iph->saddr == rt_info->saddr))
- return ip_route_me_harder(entry->state.net, skb,
- RTN_UNSPEC);
+ return ip_route_me_harder(entry->state.net, entry->state.sk,
+ skb, RTN_UNSPEC);
}
#endif
return 0;
parms.port_no = OVSP_LOCAL;
parms.upcall_portids = a[OVS_DP_ATTR_UPCALL_PID];
- err = ovs_dp_change(dp, a);
- if (err)
- goto err_destroy_meters;
-
/* So far only local changes have been made, now need the lock. */
ovs_lock();
+ err = ovs_dp_change(dp, a);
+ if (err)
+ goto err_unlock_and_destroy_meters;
+
vport = new_vport(&parms);
if (IS_ERR(vport)) {
err = PTR_ERR(vport);
ovs_dp_reset_user_features(skb, info);
}
- ovs_unlock();
- goto err_destroy_meters;
+ goto err_unlock_and_destroy_meters;
}
err = ovs_dp_cmd_fill_info(dp, reply, info->snd_portid,
ovs_notify(&dp_datapath_genl_family, reply, info);
return 0;
-err_destroy_meters:
+err_unlock_and_destroy_meters:
+ ovs_unlock();
ovs_meters_exit(dp);
err_destroy_ports:
kfree(dp->ports);
}
int ovs_flow_tbl_masks_cache_resize(struct flow_table *table, u32 size)
{
- struct mask_cache *mc = rcu_dereference(table->mask_cache);
+ struct mask_cache *mc = rcu_dereference_ovsl(table->mask_cache);
struct mask_cache *new;
if (size == mc->cache_size)
break;
case SCTP_CMD_INIT_FAILED:
- sctp_cmd_init_failed(commands, asoc, cmd->obj.u32);
+ sctp_cmd_init_failed(commands, asoc, cmd->obj.u16);
break;
case SCTP_CMD_ASSOC_FAILED:
sctp_cmd_assoc_failed(commands, asoc, event_type,
- subtype, chunk, cmd->obj.u32);
+ subtype, chunk, cmd->obj.u16);
break;
case SCTP_CMD_INIT_COUNTER_INC:
}
EXPORT_SYMBOL(cfg80211_stop_iface);
-void cfg80211_init_wdev(struct cfg80211_registered_device *rdev,
- struct wireless_dev *wdev)
+void cfg80211_init_wdev(struct wireless_dev *wdev)
{
mutex_init(&wdev->mtx);
INIT_LIST_HEAD(&wdev->event_list);
spin_lock_init(&wdev->pmsr_lock);
INIT_WORK(&wdev->pmsr_free_wk, cfg80211_pmsr_free_wk);
+#ifdef CONFIG_CFG80211_WEXT
+ wdev->wext.default_key = -1;
+ wdev->wext.default_mgmt_key = -1;
+ wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
+#endif
+
+ if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT)
+ wdev->ps = true;
+ else
+ wdev->ps = false;
+ /* allow mac80211 to determine the timeout */
+ wdev->ps_timeout = -1;
+
+ if ((wdev->iftype == NL80211_IFTYPE_STATION ||
+ wdev->iftype == NL80211_IFTYPE_P2P_CLIENT ||
+ wdev->iftype == NL80211_IFTYPE_ADHOC) && !wdev->use_4addr)
+ wdev->netdev->priv_flags |= IFF_DONT_BRIDGE;
+
+ INIT_WORK(&wdev->disconnect_wk, cfg80211_autodisconnect_wk);
+}
+
+void cfg80211_register_wdev(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev)
+{
/*
* We get here also when the interface changes network namespaces,
* as it's registered into the new one, but we don't want it to
switch (state) {
case NETDEV_POST_INIT:
SET_NETDEV_DEVTYPE(dev, &wiphy_type);
+ wdev->netdev = dev;
+ /* can only change netns with wiphy */
+ dev->features |= NETIF_F_NETNS_LOCAL;
+
+ cfg80211_init_wdev(wdev);
break;
case NETDEV_REGISTER:
/*
* called within code protected by it when interfaces
* are added with nl80211.
*/
- /* can only change netns with wiphy */
- dev->features |= NETIF_F_NETNS_LOCAL;
-
if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj,
"phy80211")) {
pr_err("failed to add phy80211 symlink to netdev!\n");
}
- wdev->netdev = dev;
-#ifdef CONFIG_CFG80211_WEXT
- wdev->wext.default_key = -1;
- wdev->wext.default_mgmt_key = -1;
- wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
-#endif
-
- if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT)
- wdev->ps = true;
- else
- wdev->ps = false;
- /* allow mac80211 to determine the timeout */
- wdev->ps_timeout = -1;
-
- if ((wdev->iftype == NL80211_IFTYPE_STATION ||
- wdev->iftype == NL80211_IFTYPE_P2P_CLIENT ||
- wdev->iftype == NL80211_IFTYPE_ADHOC) && !wdev->use_4addr)
- dev->priv_flags |= IFF_DONT_BRIDGE;
-
- INIT_WORK(&wdev->disconnect_wk, cfg80211_autodisconnect_wk);
- cfg80211_init_wdev(rdev, wdev);
+ cfg80211_register_wdev(rdev, wdev);
break;
case NETDEV_GOING_DOWN:
cfg80211_leave(rdev, wdev);
int cfg80211_switch_netns(struct cfg80211_registered_device *rdev,
struct net *net);
-void cfg80211_init_wdev(struct cfg80211_registered_device *rdev,
- struct wireless_dev *wdev);
+void cfg80211_init_wdev(struct wireless_dev *wdev);
+void cfg80211_register_wdev(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev);
static inline void wdev_lock(struct wireless_dev *wdev)
__acquires(wdev)
* P2P Device and NAN do not have a netdev, so don't go
* through the netdev notifier and must be added here
*/
- cfg80211_init_wdev(rdev, wdev);
+ cfg80211_init_wdev(wdev);
+ cfg80211_register_wdev(rdev, wdev);
break;
default:
break;
power_rule = ®_rule->power_rule;
if (reg_rule->flags & NL80211_RRF_AUTO_BW)
- snprintf(bw, sizeof(bw), "%d KHz, %d KHz AUTO",
+ snprintf(bw, sizeof(bw), "%d KHz, %u KHz AUTO",
freq_range->max_bandwidth_khz,
reg_get_max_bandwidth(rd, reg_rule));
else
.handler = xfrmi6_rcv_tunnel,
.cb_handler = xfrmi_rcv_cb,
.err_handler = xfrmi6_err,
- .priority = -1,
+ .priority = 2,
};
static struct xfrm6_tunnel xfrmi_ip6ip_handler __read_mostly = {
.handler = xfrmi6_rcv_tunnel,
.cb_handler = xfrmi_rcv_cb,
.err_handler = xfrmi6_err,
- .priority = -1,
+ .priority = 2,
};
#endif
.handler = xfrmi4_rcv_tunnel,
.cb_handler = xfrmi_rcv_cb,
.err_handler = xfrmi4_err,
- .priority = -1,
+ .priority = 3,
};
static struct xfrm_tunnel xfrmi_ipip6_handler __read_mostly = {
.handler = xfrmi4_rcv_tunnel,
.cb_handler = xfrmi_rcv_cb,
.err_handler = xfrmi4_err,
- .priority = -1,
+ .priority = 2,
};
#endif
int err = -ENOENT;
__be32 minspi = htonl(low);
__be32 maxspi = htonl(high);
+ __be32 newspi = 0;
u32 mark = x->mark.v & x->mark.m;
spin_lock_bh(&x->lock);
xfrm_state_put(x0);
goto unlock;
}
- x->id.spi = minspi;
+ newspi = minspi;
} else {
u32 spi = 0;
for (h = 0; h < high-low+1; h++) {
spi = low + prandom_u32()%(high-low+1);
x0 = xfrm_state_lookup(net, mark, &x->id.daddr, htonl(spi), x->id.proto, x->props.family);
if (x0 == NULL) {
- x->id.spi = htonl(spi);
+ newspi = htonl(spi);
break;
}
xfrm_state_put(x0);
}
}
- if (x->id.spi) {
+ if (newspi) {
spin_lock_bh(&net->xfrm.xfrm_state_lock);
+ x->id.spi = newspi;
h = xfrm_spi_hash(net, &x->id.daddr, x->id.spi, x->id.proto, x->props.family);
hlist_add_head_rcu(&x->byspi, net->xfrm.state_byspi + h);
spin_unlock_bh(&net->xfrm.xfrm_state_lock);
n2 ping -W 1 -c 1 192.168.241.1
n1 wg set wg0 peer "$pub2" persistent-keepalive 0
+# Test that sk_bound_dev_if works
+n1 ping -I wg0 -c 1 -W 1 192.168.241.2
+# What about when the mark changes and the packet must be rerouted?
+n1 iptables -t mangle -I OUTPUT -j MARK --set-xmark 1
+n1 ping -c 1 -W 1 192.168.241.2 # First the boring case
+n1 ping -I wg0 -c 1 -W 1 192.168.241.2 # Then the sk_bound_dev_if case
+n1 iptables -t mangle -D OUTPUT -j MARK --set-xmark 1
+
# Test that onion routing works, even when it loops
n1 wg set wg0 peer "$pub3" allowed-ips 192.168.242.2/32 endpoint 192.168.241.2:5
ip1 addr add 192.168.242.1/24 dev wg0
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
+CONFIG_NETFILTER_XT_MARK=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_NAT_IPV4=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
projects / linux-2.6-microblaze.git / commitdiff