CPU power good signal from external PMIC to PMC is enabled.
nvidia,suspend-mode:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
description:
The suspend mode that the platform should use.
Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh
calxeda,led-order:
description: Maps port numbers to offsets within the SGPIO bitstream.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 1
- maxItems: 8
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
calxeda,port-phys:
description: |
phandle-combophy and lane assignment, which maps each SATA port to a
combophy and a lane within that combophy
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle-array
- - minItems: 1
- maxItems: 8
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 1
+ maxItems: 8
calxeda,tx-atten:
description: |
Contains TX attenuation override codes, one per port.
The upper 24 bits of each entry are always 0 and thus ignored.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 1
- maxItems: 8
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
calxeda,sgpio-gpio:
description: |
bus@1f059000 {
compatible = "baikal,bt1-apb", "simple-bus";
- reg = <0 0x1f059000 0 0x1000>,
- <0 0x1d000000 0 0x2040000>;
+ reg = <0x1f059000 0x1000>,
+ <0x1d000000 0x2040000>;
reg-names = "ehb", "nodev";
#address-cells = <1>;
#size-cells = <1>;
bus@1f05a000 {
compatible = "baikal,bt1-axi", "simple-bus";
- reg = <0 0x1f05a000 0 0x1000>,
- <0 0x1f04d110 0 0x8>;
+ reg = <0x1f05a000 0x1000>,
+ <0x1f04d110 0x8>;
reg-names = "qos", "ehb";
#address-cells = <1>;
#size-cells = <1>;
items:
- description: CCM interrupt request 1
- description: CCM interrupt request 2
- maxItems: 2
'#clock-cells':
const: 1
items:
- description: CCM interrupt request 1
- description: CCM interrupt request 2
- maxItems: 2
'#clock-cells':
const: 1
items:
- description: CCM interrupt request 1
- description: CCM interrupt request 2
- maxItems: 2
'#clock-cells':
const: 1
items:
- description: CCM interrupt request 1
- description: CCM interrupt request 2
- maxItems: 2
'#clock-cells':
const: 1
items:
- description: CCM interrupt request 1
- description: CCM interrupt request 2
- maxItems: 2
'#clock-cells':
const: 1
#include <dt-bindings/power/rk3288-power.h>
vopb: vopb@ff930000 {
compatible = "rockchip,rk3288-vop";
- reg = <0x0 0xff930000 0x0 0x19c>,
- <0x0 0xff931000 0x0 0x1000>;
+ reg = <0xff930000 0x19c>,
+ <0xff931000 0x1000>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP0>,
<&cru DCLK_VOP0>,
snps,nr-gpios:
description: The number of GPIO pins exported by the port.
+ $ref: /schemas/types.yaml#/definitions/uint32
default: 32
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 1
- maximum: 32
+ minimum: 1
+ maximum: 32
interrupts:
description: |
1 - direct_sync
2 - scaled_sync
3 - pulse_sync
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
amstaos,cover-comp-gain:
description: Multiplier for gain compensation
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [1, 16]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 16]
required:
- compatible
posed on channels 6 and 7 by Hall-effect sensing.
azoteq,suspend-mode:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
description: |
Specifies the power mode during suspend as follows:
0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
description: Divides the device's core clock by a factor of 4.
azoteq,ulp-update:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 7
- default: 3
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+ default: 3
description: Specifies the ultra-low-power mode update rate.
azoteq,reseed-offset:
reseed events.
azoteq,filt-str-lp-lta:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
description:
Specifies the long-term average filter strength during low-power mode.
azoteq,filt-str-lp-cnt:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
description:
Specifies the raw count filter strength during low-power mode.
azoteq,filt-str-np-lta:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
description:
Specifies the long-term average filter strength during normal-power mode.
azoteq,filt-str-np-cnt:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
description:
Specifies the raw count filter strength during normal-power mode.
description: Disables all raw count filtering.
azoteq,gpio3-select:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 7
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+ default: 0
description:
Selects the channel for which the GPIO3 pin represents touch state.
in either direction.
azoteq,tx-freq:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
description: |
Specifies the inductive sensing excitation frequency as follows (paren-
thesized numbers represent the frequency if 'azoteq,clk-div' is present):
description: Increases the global capacitance adder from 0.5 pF to 1.5 pF.
azoteq,reseed-select:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
description: |
Specifies the event(s) that prompt the device to reseed (i.e. reset the
long-term average) of an associated channel as follows:
channels.
azoteq,filt-str-slider:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
- default: 1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 1
description: Specifies the slider coordinate filter strength.
patternProperties:
description: Specifies that the channel participates in slider 1.
azoteq,rx-enable:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 1
- maxItems: 8
- items:
- minimum: 0
- maximum: 7
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
description:
Specifies the CRX pin(s) associated with the channel. By default, only
the CRX pin corresponding to the channel's index is enabled (e.g. CRX0
for channel 0).
azoteq,tx-enable:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 1
- maxItems: 8
- items:
- minimum: 0
- maximum: 7
- default: [0, 1, 2, 3, 4, 5, 6, 7]
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
+ default: [0, 1, 2, 3, 4, 5, 6, 7]
description: Specifies the TX pin(s) associated with the channel.
azoteq,meas-cap-decrease:
description: Floats any inactive CRX pins instead of grounding them.
azoteq,local-cap-size:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2]
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+ default: 0
description: |
Specifies the capacitance to be added to the channel as follows:
0: None
deep-touch events relative to their respective thresholds.
azoteq,proj-bias:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
- default: 2
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 2
description: |
Specifies the bias current applied during projected-capacitance
sensing as follows:
3: 20 uA
azoteq,sense-mode:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 9, 14, 15]
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 9, 14, 15]
+ default: 0
description: |
Specifies the channel's sensing mode as follows:
0: Self capacitance
15: Temperature
azoteq,sense-freq:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
- default: 1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 1
description: |
Specifies the channel's sensing frequency as follows (parenthesized
numbers represent the frequency if 'azoteq,clk-div' is present):
description: Enables the static front-end for the channel.
azoteq,ati-mode:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
- default: 3
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 3
description: |
Specifies the channel's ATI mode as follows:
0: Disabled
3: Full
azoteq,ati-base:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [75, 100, 150, 200]
- default: 100
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [75, 100, 150, 200]
+ default: 100
description: Specifies the channel's ATI base.
azoteq,ati-target:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - multipleOf: 32
- minimum: 0
- maximum: 2016
- default: 512
+ $ref: /schemas/types.yaml#/definitions/uint32
+ multipleOf: 32
+ minimum: 0
+ maximum: 2016
+ default: 512
description: Specifies the channel's ATI target.
azoteq,assoc-select:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 1
- maxItems: 8
- items:
- minimum: 0
- maximum: 7
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
description:
Specifies the associated channels for which the channel serves as a
reference channel. By default, no channels are selected.
azoteq,assoc-weight:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 255
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 0
description:
Specifies the channel's impact weight if it acts as an associated
channel (0 = 0% impact, 255 = 200% impact).
properties:
azoteq,thresh:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 255
- default: 10
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 10
description: Specifies the threshold for the event.
linux,code:
properties:
azoteq,thresh:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 255
- default: 8
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 8
description: Specifies the threshold for the event.
azoteq,hyst:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 15
- default: 4
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 4
description: Specifies the hysteresis for the event.
linux,code:
properties:
azoteq,thresh:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 255
- default: 26
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 26
description: Specifies the threshold for the event.
azoteq,hyst:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- maximum: 15
- default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 0
description: Specifies the hysteresis for the event.
linux,code:
description:
u32 value of the base of parent HyperTransport vector allocated
to PCH MSI.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 255
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 255
loongson,msi-num-vecs:
description:
u32 value of the number of parent HyperTransport vectors allocated
to PCH MSI.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 1
- maximum: 256
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 1
+ maximum: 256
msi-controller: true
description:
u32 value of the base of parent HyperTransport vector allocated
to PCH PIC.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 192
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 192
interrupt-controller: true
reg-size:
description: The access width of the register in bytes. Defaults to 1.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [1, 2, 4, 8]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4, 8]
reg-spacing:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
The amount of bits to shift the register content to the right to get
the data into bit zero.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maximum: 56
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 56
required:
- compatible
description: |
mA; per-string current limit.
This property is supported only for WLED3.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
default: 20
minimum: 0
maximum: 25
qcom,current-boost-limit:
description: |
mA; boost current limit.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
qcom,switching-freq:
description: |
kHz; switching frequency.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
qcom,ovp:
description: |
V; Over-voltage protection limit.
This property is supported only for WLED3.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 27, 29, 32, 35 ]
- - default: 29
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 27, 29, 32, 35 ]
+ default: 29
qcom,ovp-millivolt:
description: |
Over-voltage protection limit. This property is for WLED4 only.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 18100, 19600, 29600, 31100 ]
- - default: 29600
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 18100, 19600, 29600, 31100 ]
+ default: 29600
qcom,num-strings:
description: |
number of led strings attached.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
qcom,enabled-strings:
description: |
string of leds are operated individually. Specify the
list of strings used by the device. Any combination of
led strings can be used.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 4
0 - Modulator A
1 - Modulator B
This property is applicable only to WLED5 peripheral.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1 ]
- - default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ default: 0
qcom,cabc-sel:
description: |
2 - CABC 2
3 - External signal (e.g. LPG) is used for dimming
This property is applicable only to WLED5 peripheral.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 1, 2, 3 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3 ]
allOf:
- if:
patternProperties:
"^led@[0-2]$":
type: object
- allOf:
- - $ref: common.yaml#
+ $ref: common.yaml#
properties:
reg:
led:
type: object
- allOf:
- - $ref: common.yaml#
+ $ref: common.yaml#
required:
- compatible
#include <dt-bindings/interrupt-controller/arm-gic.h>
mailbox: mailbox@400a0000 {
compatible = "sprd,sc9860-mailbox";
- reg = <0 0x400a0000 0 0x8000>, <0 0x400a8000 0 0x8000>;
+ reg = <0x400a0000 0x8000>, <0x400a8000 0x8000>;
#mbox-cells = <1>;
clock-names = "enable";
clocks = <&aon_gate 53>;
- const: 4
link-frequencies:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint64-array
+ $ref: /schemas/types.yaml#/definitions/uint64-array
description:
Allowed data bus frequencies. 360000000, 180000000 Hz or both
are supported by the driver.
vdec: video-codec@ff660000 {
compatible = "rockchip,rk3399-vdec";
- reg = <0x0 0xff660000 0x0 0x400>;
+ reg = <0xff660000 0x400>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
<&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
vpu: video-codec@ff9a0000 {
compatible = "rockchip,rk3288-vpu";
- reg = <0x0 0xff9a0000 0x0 0x800>;
+ reg = <0xff9a0000 0x800>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vepu", "vdpu";
maxItems: 255
ingenic,nemc-bus-width:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [8, 16]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [8, 16]
description: Specifies the bus width in bits.
ingenic,nemc-tAS:
- |
nfc: nand-controller@ff100000 {
compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10";
- reg = <0x0 0xff100000 0x0 0x1000>;
+ reg = <0xff100000 0x1000>;
clock-names = "controller", "bus";
clocks = <&clk200>, <&clk100>;
interrupt-parent = <&gic>;
"^cpts@[0-9a-f]+":
type: object
- allOf:
- - $ref: "ti,k3-am654-cpts.yaml#"
+ $ref: "ti,k3-am654-cpts.yaml#"
description:
CPSW Common Platform Time Sync (CPTS) module.
- const: cpts
ti,cpts-ext-ts-inputs:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
maximum: 8
description:
Number of hardware timestamp push inputs (HWx_TS_PUSH)
ti,cpts-periodic-outputs:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
maximum: 8
description:
Number of timestamp Generator function outputs (TS_GENFx)
cpts@310d0000 {
compatible = "ti,am65-cpts";
- reg = <0x0 0x310d0000 0x0 0x400>;
+ reg = <0x310d0000 0x400>;
reg-names = "cpts";
clocks = <&main_cpts_mux>;
clock-names = "cpts";
properties:
cdns,max-outbound-regions:
description: maximum number of outbound regions
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 32
default: 32
properties:
cdns,max-outbound-regions:
description: maximum number of outbound regions
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 32
default: 32
phydev:
description: device ID for programming the ComboPHY.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maximum: 31
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 31
required:
- compatible
"#size-cells":
enum: [ 1, 2 ]
+ ranges: true
+
clocks:
minItems: 1
maxItems: 4
- "#clock-cells"
- "#address-cells"
- "#size-cells"
+ - ranges
- clocks
- clock-names
- resets
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
usb_2_qmpphy: phy-wrapper@88eb000 {
compatible = "qcom,sdm845-qmp-usb3-uni-phy";
- reg = <0 0x088eb000 0 0x18c>;
+ reg = <0x088eb000 0x18c>;
#clock-cells = <1>;
- #address-cells = <2>;
- #size-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x088eb000 0x2000>;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
vdda-phy-supply = <&vdda_usb2_ss_1p2>;
vdda-pll-supply = <&vdda_usb2_ss_core>;
- usb_2_ssphy: phy@88eb200 {
- reg = <0 0x088eb200 0 0x128>,
- <0 0x088eb400 0 0x1fc>,
- <0 0x088eb800 0 0x218>,
- <0 0x088eb600 0 0x70>;
+ usb_2_ssphy: phy@200 {
+ reg = <0x200 0x128>,
+ <0x400 0x1fc>,
+ <0x800 0x218>,
+ <0x600 0x70>;
#clock-cells = <0>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
"#size-cells":
enum: [ 1, 2 ]
+ ranges: true
+
clocks:
items:
- description: Phy aux clock.
- "#clock-cells"
- "#address-cells"
- "#size-cells"
+ - ranges
- clocks
- clock-names
- resets
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
usb_1_qmpphy: phy-wrapper@88e9000 {
compatible = "qcom,sdm845-qmp-usb3-phy";
- reg = <0 0x088e9000 0 0x18c>,
- <0 0x088e8000 0 0x10>;
+ reg = <0x088e9000 0x18c>,
+ <0x088e8000 0x10>;
reg-names = "reg-base", "dp_com";
#clock-cells = <1>;
- #address-cells = <2>;
- #size-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x088e9000 0x1000>;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
vdda-phy-supply = <&vdda_usb2_ss_1p2>;
vdda-pll-supply = <&vdda_usb2_ss_core>;
- usb_1_ssphy: phy@88e9200 {
- reg = <0 0x088e9200 0 0x128>,
- <0 0x088e9400 0 0x200>,
- <0 0x088e9c00 0 0x218>,
- <0 0x088e9600 0 0x128>,
- <0 0x088e9800 0 0x200>,
- <0 0x088e9a00 0 0x100>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_phy_pipe_clk_src";
- };
+ phy@200 {
+ reg = <0x200 0x128>,
+ <0x400 0x200>,
+ <0xc00 0x218>,
+ <0x600 0x128>,
+ <0x800 0x200>,
+ <0xa00 0x100>;
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_phy_pipe_clk_src";
};
+ };
#include <dt-bindings/clock/qcom,gcc-sm8150.h>
phy@88e2000 {
compatible = "qcom,sm8150-usb-hs-phy";
- reg = <0 0x088e2000 0 0x400>;
+ reg = <0x088e2000 0x400>;
#phy-cells = <0>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
description: |
Enable/disable spread spectrum clock (ssc). 0 or the property doesn't
exist means disabling the ssc. The actual value will be -<value> ppm.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 0, 4003, 4492, 4980 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 4003, 4492, 4980 ]
required:
- compatible
of this binary blob is kept secret by CellWise. The only way to obtain
it is to mail two batteries to a test facility of CellWise and receive
back a test report with the binary blob.
- allOf:
- - $ref: /schemas/types.yaml#definitions/uint8-array
- items:
- - minItems: 64
- maxItems: 64
+ $ref: /schemas/types.yaml#definitions/uint8-array
+ minItems: 64
+ maxItems: 64
cellwise,monitor-interval-ms:
description:
power-supplies:
description:
Specifies supplies used for charging the battery connected to this gauge
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle-array
- - minItems: 1
- maxItems: 8 # Should be enough
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 1
+ maxItems: 8 # Should be enough
monitored-battery:
description:
description:
The number of times to retry I2C transactions on I2C IO failure.
default: 0
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
sbs,poll-retry-count:
description:
The number of times to try looking for new status after an external
change notification.
default: 0
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
sbs,battery-detect-gpios:
description:
items:
- description: SoC PWM ipg clock
- description: SoC PWM per clock
- maxItems: 2
clock-names:
items:
- const: ipg
- const: per
- maxItems: 2
interrupts:
maxItems: 1
regulators:
type: object
- allOf:
- - $ref: regulator.yaml#
+ $ref: regulator.yaml#
description: |
list of regulators provided by this controller, must be named
after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST
patternProperties:
"^LDO([1-9]|1[0-5])$":
type: object
- allOf:
- - $ref: regulator.yaml#
+ $ref: regulator.yaml#
"^BUCK|BUCKBOOST$":
type: object
- allOf:
- - $ref: regulator.yaml#
+ $ref: regulator.yaml#
additionalProperties: false
patternProperties:
"^LDO[1-6]$":
type: object
- allOf:
- - $ref: regulator.yaml#
+ $ref: regulator.yaml#
description:
Properties for single LDO regulator.
"^BUCK[1-6]$":
type: object
- allOf:
- - $ref: regulator.yaml#
+ $ref: regulator.yaml#
description:
Properties for single BUCK regulator.
should be "buck1", ..., "buck6"
rohm,dvs-run-voltage:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 1300000
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 1300000
description:
PMIC default "RUN" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
rohm,dvs-idle-voltage:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 1300000
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 1300000
description:
PMIC default "IDLE" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
rohm,dvs-suspend-voltage:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - minimum: 0
- maximum: 1300000
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 1300000
description:
PMIC default "SUSPEND" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
description:
Arm TrustZone CryptoCell TRNG engine has 4 ring oscillators.
Sampling ratio values for these 4 ring oscillators. (from calibration)
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- maxItems: 4
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 4
clocks:
maxItems: 1
description: |
The size (in bytes) of the IO accesses that should be performed
on the device.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 1, 4 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1, 4 ]
clocks:
minItems: 2
supports up to 50MHz, up to four chip selects, programmable
data path from 4 bits to 32 bits and numerous protocol
variants.
- allOf:
- - $ref: /spi/spi-controller.yaml#
+ $ref: /spi/spi-controller.yaml#
properties:
compatible:
"i2c@[0-9a-f]+$":
type: object
description: GENI serial engine based I2C controller.
- allOf:
- - $ref: /schemas/i2c/i2c-controller.yaml#
+ $ref: /schemas/i2c/i2c-controller.yaml#
properties:
compatible:
"serial@[0-9a-f]+$":
type: object
description: GENI Serial Engine based UART Controller.
- allOf:
- - $ref: /schemas/serial.yaml#
+ $ref: /schemas/serial.yaml#
properties:
compatible:
- const: ctx3_tx
firmware-name:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
- - const: imx/easrc/easrc-imx8mn.bin
+ $ref: /schemas/types.yaml#/definitions/string
+ const: imx/easrc/easrc-imx8mn.bin
description: The coefficient table for the filters
fsl,asrc-rate:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 8000
- - maximum: 192000
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 8000
+ maximum: 192000
description: Defines a mutual sample rate used by DPCM Back Ends
fsl,asrc-format:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [2, 6, 10, 32, 36]
- default: 2
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [2, 6, 10, 32, 36]
+ default: 2
description:
Defines a mutual sample format used by DPCM Back Ends
easrc: easrc@300c0000 {
compatible = "fsl,imx8mn-easrc";
- reg = <0x0 0x300c0000 0x0 0x10000>;
+ reg = <0x300c0000 0x10000>;
interrupts = <0x0 122 0x4>;
clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
clock-names = "mem";
frame-master:
description: Indicates dai-link frame master.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle-array
- - maxItems: 1
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
bitclock-master:
description: Indicates dai-link bit clock master
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle-array
- - maxItems: 1
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
frame-inversion:
description: dai-link uses frame clock inversion
PDMIN3 - PDMCLK latching edge used for channel 5 and 6 data
PDMIN4 - PDMCLK latching edge used for channel 7 and 8 data
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 1
- maxItems: 4
- items:
- maximum: 1
- default: [0, 0, 0, 0]
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4
+ items:
+ maximum: 1
+ default: [0, 0, 0, 0]
ti,gpi-config:
description: |
7 - GPIX is configured as a PDM data input for channel 7 and channel
(PDMDIN4)
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 1
- maxItems: 4
- items:
- maximum: 7
- default: [0, 0, 0, 0]
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4
+ items:
+ maximum: 7
+ default: [0, 0, 0, 0]
required:
- compatible
const: 0
socionext,tmod-calibration:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - maxItems: 2
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 2
description:
A pair of calibrated values referred from PVT, in case that the values
aren't set on SoC, like a reference board.
vhub-vendor-id:
description: vhub Vendor ID
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maximum: 65535
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 65535
vhub-product-id:
description: vhub Product ID
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maximum: 65535
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 65535
vhub-device-revision:
description: vhub Device Revision in binary-coded decimal
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - maximum: 65535
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 65535
vhub-strings:
type: object
manufacturer:
description: vhub manufacturer
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
product:
description: vhub product name
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
serial-number:
description: vhub device serial number
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
required:
- compatible
- const: hs_src
power-domains:
- maxItems: 2
items:
- description: XUSBB(device) power-domain
- description: XUSBA(superspeed) power-domain
power-domain-names:
- maxItems: 2
items:
- const: dev
- const: ss
enum:
- arm,smc-wdt
arm,smc-id:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
The ATF smc function id used by the firmware.
Defaults to 0x82003D06 if unset.
HOST_EXTRACFLAGS += -DNO_YAML
else
dtc-objs += yamltree.o
+# To include <yaml.h> installed in a non-default path
+HOSTCFLAGS_yamltree.o := $(shell pkg-config --cflags yaml-0.1)
+# To link libyaml installed in a non-default path
HOSTLDLIBS_dtc := $(shell pkg-config yaml-0.1 --libs)
endif