=== 4 Host Program support
--- 4.1 Simple Host Program
--- 4.2 Composite Host Programs
- --- 4.3 Defining shared libraries
+ --- 4.3 Defining shared libraries
--- 4.4 Using C++ for host programs
--- 4.5 Controlling compiler options for host programs
--- 4.6 When host programs are actually built
Each subdirectory has a kbuild Makefile which carries out the commands
passed down from above. The kbuild Makefile uses information from the
-.config file to construct various file lists used by kbuild to build
+.config file to construct various file lists used by kbuild to build
any built-in or modular targets.
scripts/Makefile.* contains all the definitions/rules etc. that
Example:
#fs/ext2/Makefile
obj-$(CONFIG_EXT2_FS) += ext2.o
- ext2-y := balloc.o bitmap.o
+ ext2-y := balloc.o bitmap.o
ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o
-
+
In this example, xattr.o is only part of the composite object
ext2.o if $(CONFIG_EXT2_FS_XATTR) evaluates to 'y'.
For kbuild to actually recognize that there is a lib.a being built,
the directory shall be listed in libs-y.
See also "6.3 List directories to visit when descending".
-
+
Use of lib-y is normally restricted to lib/ and arch/*/lib.
--- 3.6 Descending down in directories
if first argument is not supported.
ld-option
- ld-option is used to check if $(CC) when used to link object files
+ ld-option is used to check if $(CC) when used to link object files
supports the given option. An optional second option may be
specified if first option are not supported.
cflags-y will be assigned no value if first option is not supported.
cc-option-yn
- cc-option-yn is used to check if gcc supports a given option
+ cc-option-yn is used to check if gcc supports a given option
and return 'y' if supported, otherwise 'n'.
Example:
biarch := $(call cc-option-yn, -m32)
aflags-$(biarch) += -a32
cflags-$(biarch) += -m32
-
+
In the above example, $(biarch) is set to y if $(CC) supports the -m32
option. When $(biarch) equals 'y', the expanded variables $(aflags-y)
and $(cflags-y) will be assigned the values -a32 and -m32,
cc-option-align = -malign
gcc >= 3.00
cc-option-align = -falign
-
+
Example:
CFLAGS += $(cc-option-align)-functions=4
In the above example, the option -falign-functions=4 is used for
gcc >= 3.00. For gcc < 3.00, -malign-functions=4 is used.
-
+
cc-version
cc-version returns a numerical version of the $(CC) compiler version.
The format is <major><minor> where both are two digits. So for example
In this example, EXTRA_CFLAGS will be assigned the value -O1 if the
$(CC) version is less than 4.2.
- cc-ifversion takes all the shell operators:
+ cc-ifversion takes all the shell operators:
-eq, -ne, -lt, -le, -gt, and -ge
The third parameter may be a text as in this example, but it may also
be an expanded variable or a macro.
done utilising the variable hostprogs-y.
The second step is to add an explicit dependency to the executable.
-This can be done in two ways. Either add the dependency in a rule,
+This can be done in two ways. Either add the dependency in a rule,
or utilise the variable $(always).
Both possibilities are described in the following.
Kbuild assumes in the above example that bin2hex is made from a single
c-source file named bin2hex.c located in the same directory as
the Makefile.
-
+
--- 4.2 Composite Host Programs
Host programs can be made up based on composite objects.
Example:
#scripts/lxdialog/Makefile
- hostprogs-y := lxdialog
+ hostprogs-y := lxdialog
lxdialog-objs := checklist.o lxdialog.o
Objects with extension .o are compiled from the corresponding .c
Finally, the two .o files are linked to the executable, lxdialog.
Note: The syntax <executable>-y is not permitted for host-programs.
---- 4.3 Defining shared libraries
-
+--- 4.3 Defining shared libraries
+
Objects with extension .so are considered shared libraries, and
will be compiled as position independent objects.
Kbuild provides support for shared libraries, but the usage
hostprogs-y := conf
conf-objs := conf.o libkconfig.so
libkconfig-objs := expr.o type.o
-
+
Shared libraries always require a corresponding -objs line, and
in the example above the shared library libkconfig is composed by
the two objects expr.o and type.o.
In the example above the executable is composed of the C++ file
qconf.cc - identified by $(qconf-cxxobjs).
-
+
If qconf is composed by a mixture of .c and .cc files, then an
additional line can be used to identify this.
hostprogs-y := qconf
qconf-cxxobjs := qconf.o
qconf-objs := check.o
-
+
--- 4.5 Controlling compiler options for host programs
When compiling host programs, it is possible to set specific flags.
Example:
#scripts/lxdialog/Makefile
HOST_EXTRACFLAGS += -I/usr/include/ncurses
-
+
To set specific flags for a single file the following construction
is used:
Example:
#arch/ppc64/boot/Makefile
HOSTCFLAGS_piggyback.o := -DKERNELBASE=$(KERNELBASE)
-
+
It is also possible to specify additional options to the linker.
-
+
Example:
#scripts/kconfig/Makefile
HOSTLOADLIBES_qconf := -L$(QTDIR)/lib
When linking qconf, it will be passed the extra option
"-L$(QTDIR)/lib".
-
+
--- 4.6 When host programs are actually built
Kbuild will only build host-programs when they are referenced
$(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist
( cd $(obj); ./gen-devlist ) < $<
- The target $(obj)/devlist.h will not be built before
+ The target $(obj)/devlist.h will not be built before
$(obj)/gen-devlist is updated. Note that references to
the host programs in special rules must be prefixed with $(obj).
--- 4.7 Using hostprogs-$(CONFIG_FOO)
- A typcal pattern in a Kbuild file looks like this:
+ A typical pattern in a Kbuild file looks like this:
Example:
#scripts/Makefile
be deleted. Kbuild will assume files to be in same relative directory as the
Makefile except if an absolute path is specified (path starting with '/').
-To delete a directory hirachy use:
+To delete a directory hierarchy use:
+
Example:
#scripts/package/Makefile
clean-dirs := $(objtree)/debian/
5) Recursively descend down in all directories listed in
init-* core* drivers-* net-* libs-* and build all targets.
- The values of the above variables are expanded in arch/$(ARCH)/Makefile.
-6) All object files are then linked and the resulting file vmlinux is
+6) All object files are then linked and the resulting file vmlinux is
located at the root of the obj tree.
The very first objects linked are listed in head-y, assigned by
arch/$(ARCH)/Makefile.
LDFLAGS := -m elf_s390
Note: EXTRA_LDFLAGS and LDFLAGS_$@ can be used to further customise
the flags used. See chapter 7.
-
+
LDFLAGS_MODULE Options for $(LD) when linking modules
LDFLAGS_MODULE is used to set specific flags for $(LD) when
$(CFLAGS_MODULE) contains extra C compiler flags used to compile code
for loadable kernel modules.
-
+
--- 6.2 Add prerequisites to archprepare:
The archprepare: rule is used to list prerequisites that need to be
corresponding arch-specific section for modules; the module-building
machinery is all architecture-independent.
-
+
head-y, init-y, core-y, libs-y, drivers-y, net-y
$(head-y) lists objects to be linked first in vmlinux.
#arch/i386/Makefile
define archhelp
echo '* bzImage - Image (arch/$(ARCH)/boot/bzImage)'
- endef
+ endif
When make is executed without arguments, the first goal encountered
will be built. In the top level Makefile the first goal present
Example:
#arch/i386/Makefile
- all: bzImage
+ all: bzImage
When "make" is executed without arguments, bzImage will be built.
In this example, extra-y is used to list object files that
shall be built, but shall not be linked as part of built-in.o.
-
+
--- 6.6 Commands useful for building a boot image
Kbuild provides a few macros that are useful when building a
ld
Link target. Often, LDFLAGS_$@ is used to set specific options to ld.
-
+
objcopy
Copy binary. Uses OBJCOPYFLAGS usually specified in
arch/$(ARCH)/Makefile.
BUILD arch/i386/boot/bzImage
will be displayed with "make KBUILD_VERBOSE=0".
-
+
--- 6.8 Preprocessing linker scripts
The script is a preprocessed variant of the file vmlinux.lds.S
located in the same directory.
kbuild knows .lds files and includes a rule *lds.S -> *lds.
-
+
Example:
#arch/i386/kernel/Makefile
always := vmlinux.lds
-
+
#Makefile
export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
-
- The assigment to $(always) is used to tell kbuild to build the
+
+ The assignment to $(always) is used to tell kbuild to build the
target vmlinux.lds.
The assignment to $(CPPFLAGS_vmlinux.lds) tells kbuild to use the
specified options when building the target vmlinux.lds.
-
+
When building the *.lds target, kbuild uses the variables:
CPPFLAGS : Set in top-level Makefile
EXTRA_CPPFLAGS : May be set in the kbuild makefile
- Generating offset header files.
- Add more variables to section 7?
+
+
projects / linux-2.6-microblaze.git / commitdiff