Right now the direction of a DAI has to be specified as a literal
number in the device tree, e.g.:
dai@0 {
reg = <0>;
direction = <2>;
};
but this does not make it immediately clear that this is a
playback/RX-only DAI.
Actually, q6asm-dai.c has useful defines for this. Move them to the
dt-bindings header to allow using them in the dts(i) files.
The example above then becomes:
dai@0 {
reg = <0>;
direction = <Q6ASM_DAI_RX>;
};
which is immediately recognizable as playback/RX-only DAI.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200727082502.2341-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Usage: Required for Compress offload dais
Value type: <u32>
Definition: Specifies the direction of the dai stream
- 0 for both tx and rx
- 1 for only tx (Capture/Encode)
- 2 for only rx (Playback/Decode)
+ Q6ASM_DAI_TX_RX (0) for both tx and rx
+ Q6ASM_DAI_TX (1) for only tx (Capture/Encode)
+ Q6ASM_DAI_RX (2) for only rx (Playback/Decode)
- is-compress-dai:
Usage: Required for Compress offload dais
= EXAMPLE
+#include <dt-bindings/sound/qcom,q6asm.h>
apr-service@7 {
compatible = "qcom,q6asm";
dai@0 {
reg = <0>;
- direction = <2>;
+ direction = <Q6ASM_DAI_RX>;
is-compress-dai;
};
};
#define MSM_FRONTEND_DAI_MULTIMEDIA15 14
#define MSM_FRONTEND_DAI_MULTIMEDIA16 15
+#define Q6ASM_DAI_TX_RX 0
+#define Q6ASM_DAI_TX 1
+#define Q6ASM_DAI_RX 2
+
#endif /* __DT_BINDINGS_Q6_ASM_H__ */
#define COMPR_PLAYBACK_MAX_FRAGMENT_SIZE (128 * 1024)
#define COMPR_PLAYBACK_MIN_NUM_FRAGMENTS (4)
#define COMPR_PLAYBACK_MAX_NUM_FRAGMENTS (16 * 4)
-#define Q6ASM_DAI_TX_RX 0
-#define Q6ASM_DAI_TX 1
-#define Q6ASM_DAI_RX 2
#define ALAC_CH_LAYOUT_MONO ((101 << 16) | 1)
#define ALAC_CH_LAYOUT_STEREO ((101 << 16) | 2)