serial: 8250: 8250_omap: Fix possible interrupt storm

It is possible that RX TIMEOUT is signalled after RX FIFO has been
drained, in which case a dummy read of RX FIFO is required to clear RX
TIMEOUT condition. Otherwise, RX TIMEOUT condition is not cleared
leading to an interrupt storm

Cc: stable@vger.kernel.org
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20210511151955.28071-1-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 8ac11ea..c71bd76 100644 (file)
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -104,6 +104,9 @@
 #define UART_OMAP_EFR2                 0x23
 #define UART_OMAP_EFR2_TIMEOUT_BEHAVE  BIT(6)
 
+/* RX FIFO occupancy indicator */
+#define UART_OMAP_RX_LVL               0x64
+
 struct omap8250_priv {
        int line;
        u8 habit;
@@ -625,6 +628,15 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
        serial8250_rpm_get(up);
        iir = serial_port_in(port, UART_IIR);
        ret = serial8250_handle_irq(port, iir);
+       /*
+        * It is possible that RX TIMEOUT is signalled after FIFO
+        * has been drained, in which case a dummy read of RX FIFO is
+        * required to clear RX TIMEOUT condition.
+        */
+       if ((iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT) {
+               if (serial_port_in(port, UART_OMAP_RX_LVL) == 0)
+                       serial_port_in(port, UART_RX);
+       }
        serial8250_rpm_put(up);
 
        return IRQ_RETVAL(ret);