ARM: dts: vf610: use the interrupt macros

This patch uses the IRQ_TYPE_LEVEL_HIGH/IRQ_TYPE_NONE to replace
the hardcode.

[shawn.guo: While at it, we also fix the typo in uart0 interrupts
property, where the 0x00 should 0x04.  Hense, it should also be
IRQ_TYPE_LEVEL_HIGH just like other UART instances.]

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 183943e..107e2c0 100644 (file)
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -10,6 +10,7 @@
 #include "skeleton.dtsi"
 #include "vf610-pinfunc.h"
 #include <dt-bindings/clock/vf610-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
        aliases {
@@ -90,7 +91,7 @@
                        uart0: serial@40027000 {
                                compatible = "fsl,vf610-lpuart";
                                reg = <0x40027000 0x1000>;
-                               interrupts = <0 61 0x00>;
+                               interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clks VF610_CLK_UART0>;
                                clock-names = "ipg";
                                status = "disabled";
@@ -99,7 +100,7 @@
                        uart1: serial@40028000 {
                                compatible = "fsl,vf610-lpuart";
                                reg = <0x40028000 0x1000>;
-                               interrupts = <0 62 0x04>;
+                               interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clks VF610_CLK_UART1>;
                                clock-names = "ipg";
                                status = "disabled";
@@ -108,7 +109,7 @@
                        uart2: serial@40029000 {
                                compatible = "fsl,vf610-lpuart";
                                reg = <0x40029000 0x1000>;
-                               interrupts = <0 63 0x04>;
+                               interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clks VF610_CLK_UART2>;
                                clock-names = "ipg";
                                status = "disabled";
@@ -117,7 +118,7 @@
                        uart3: serial@4002a000 {
                                compatible = "fsl,vf610-lpuart";
                                reg = <0x4002a000 0x1000>;
-                               interrupts = <0 64 0x04>;
+                               interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clks VF610_CLK_UART3>;
                                clock-names = "ipg";
                                status = "disabled";
@@ -128,7 +129,7 @@
                                #size-cells = <0>;
                                compatible = "fsl,vf610-dspi";
                                reg = <0x4002c000 0x1000>;
-                               interrupts = <0 67 0x04>;
+                               interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clks VF610_CLK_DSPI0>;
                                clock-names = "dspi";
                                spi-num-chipselects = <5>;
@@ -138,7 +139,7 @@
                        sai2: sai@40031000 {
                                compatible = "fsl,vf610-sai";
                                reg = <0x40031000 0x1000>;
-                               interrupts = <0 86 0x04>;
+                               interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clks VF610_CLK_SAI2>;
                                clock-names = "sai";
                                status = "disabled";
@@ -147,7 +148,7 @@
                        pit: pit@40037000 {
                                compatible = "fsl,vf610-pit";
                                reg = <0x40037000 0x1000>;
-                               interrupts = <0 39 0x04>;
+                               interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clks VF610_CLK_PIT>;
                                clock-names = "pit";
                        };
@@ -164,7 +165,7 @@
                                #size-cells = <0>;
                                compatible = "fsl,vf610-qspi";
                                reg = <0x40044000 0x1000>;
-                               interrupts = <0 24 0x04>;
+                               interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clks VF610_CLK_QSPI0_EN>,
                                        <&clks VF610_CLK_QSPI0>;
                                clock-names = "qspi_en", "qspi";
@@ -180,7 +181,7 @@
                        gpio1: gpio@40049000 {
                                compatible = "fsl,vf610-gpio";
                                reg = <0x40049000 0x1000 0x400ff000 0x40>;
-                               interrupts = <0 107 0x04>;
+                               interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
                                gpio-controller;
                                #gpio-cells = <2>;
                                interrupt-controller;
@@ -191,7 +192,7 @@
                        gpio2: gpio@4004a000 {
                                compatible = "fsl,vf610-gpio";
                                reg = <0x4004a000 0x1000 0x400ff040 0x40>;
-                               interrupts = <0 108 0x04>;
+                               interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
                                gpio-controller;
                                #gpio-cells = <2>;
                                interrupt-controller;
@@ -202,7 +203,7 @@
                        gpio3: gpio@4004b000 {
                                compatible = "fsl,vf610-gpio";
                                reg = <0x4004b000 0x1000 0x400ff080 0x40>;
-                               interrupts = <0 109 0x04>;
+                               interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
                                gpio-controller;
                                #gpio-cells = <2>;
                                interrupt-controller;
@@ -213,7 +214,7 @@
                        gpio4: gpio@4004c000 {
                                compatible = "fsl,vf610-gpio";
                                reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
-                               interrupts = <0 110 0x04>;
+                               interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
                                gpio-controller;
                                #gpio-cells = <2>;
                                interrupt-controller;
@@ -224,7 +225,7 @@
                        gpio5: gpio@4004d000 {
                                compatible = "fsl,vf610-gpio";
                                reg = <0x4004d000 0x1000 0x400ff100 0x40>;
-                               interrupts = <0 111 0x04>;
+                               interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
                                gpio-controller;
                                #gpio-cells = <2>;
                                interrupt-controller;
@@ -242,7 +243,7 @@
                                #size-cells = <0>;
                                compatible = "fsl,vf610-i2c";
                                reg = <0x40066000 0x1000>;
-                               interrupts =<0 71 0x04>;
+                               interrupts =<0 71 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clks VF610_CLK_I2C0>;
                                clock-names = "ipg";
                                status = "disabled";
@@ -265,7 +266,7 @@
                        uart4: serial@400a9000 {
                                compatible = "fsl,vf610-lpuart";
                                reg = <0x400a9000 0x1000>;
-                               interrupts = <0 65 0x04>;
+                               interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clks VF610_CLK_UART4>;
                                clock-names = "ipg";
                                status = "disabled";
@@ -274,7 +275,7 @@
                        uart5: serial@400aa000 {
                                compatible = "fsl,vf610-lpuart";
                                reg = <0x400aa000 0x1000>;
-                               interrupts = <0 66 0x04>;
+                               interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clks VF610_CLK_UART5>;
                                clock-names = "ipg";
                                status = "disabled";
@@ -283,7 +284,7 @@
                        fec0: ethernet@400d0000 {
                                compatible = "fsl,mvf600-fec";
                                reg = <0x400d0000 0x1000>;
-                               interrupts = <0 78 0x04>;
+                               interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clks VF610_CLK_ENET0>,
                                        <&clks VF610_CLK_ENET0>,
                                        <&clks VF610_CLK_ENET>;
@@ -294,7 +295,7 @@
                        fec1: ethernet@400d1000 {
                                compatible = "fsl,mvf600-fec";
                                reg = <0x400d1000 0x1000>;
-                               interrupts = <0 79 0x04>;
+                               interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&clks VF610_CLK_ENET1>,
                                        <&clks VF610_CLK_ENET1>,
                                        <&clks VF610_CLK_ENET>;