arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS

The KBox A-230-LS supports four external ports which are connected to
the internal switch of the LS1028A via QSGMII. Now that the Felix switch
is supported, add these ports in the device tree.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 32f6c80..4e30558 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -18,6 +18,29 @@
                     "kontron,sl28", "fsl,ls1028a";
 };
 
+&enetc_mdio_pf3 {
+       /* BCM54140 QSGMII quad PHY */
+       qsgmii_phy0: ethernet-phy@7 {
+               reg = <7>;
+       };
+
+       qsgmii_phy1: ethernet-phy@8 {
+               reg = <8>;
+       };
+
+       qsgmii_phy2: ethernet-phy@9 {
+               reg = <9>;
+       };
+
+       qsgmii_phy3: ethernet-phy@10 {
+               reg = <10>;
+       };
+};
+
+&enetc_port2 {
+       status = "okay";
+};
+
 &i2c3 {
        eeprom@57 {
                compatible = "atmel,24c32";
@@ -25,3 +48,40 @@
                pagesize = <32>;
        };
 };
+
+&mscc_felix_port0 {
+       label = "swp0";
+       managed = "in-band-status";
+       phy-handle = <&qsgmii_phy0>;
+       phy-mode = "qsgmii";
+       status = "okay";
+};
+
+&mscc_felix_port1 {
+       label = "swp1";
+       managed = "in-band-status";
+       phy-handle = <&qsgmii_phy1>;
+       phy-mode = "qsgmii";
+       status = "okay";
+};
+
+&mscc_felix_port2 {
+       label = "swp2";
+       managed = "in-band-status";
+       phy-handle = <&qsgmii_phy2>;
+       phy-mode = "qsgmii";
+       status = "okay";
+};
+
+&mscc_felix_port3 {
+       label = "swp3";
+       managed = "in-band-status";
+       phy-handle = <&qsgmii_phy3>;
+       phy-mode = "qsgmii";
+       status = "okay";
+};
+
+&mscc_felix_port4 {
+       ethernet = <&enetc_port2>;
+       status = "okay";
+};