iio: imu: mpu6050: Add support for vdd-supply regulator

MPU6050 has two power supply pins: VDD and VLOGIC, but the
mpu6050 driver only supports enabling one of them at the moment.
In some cases, they may need to be enabled separately.

Add an additional "vdd-supply" that stays enabled for as long as
the driver is loaded. We cannot turn off the VDD regulator during
suspend as this would cause register settings (FSR, sampling rate, ...)
to be lost.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 354030e..661a829 100644 (file)
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -1140,14 +1140,14 @@ error_power_off:
        return result;
 }
 
-static int inv_mpu_core_enable_regulator(struct inv_mpu6050_state *st)
+static int inv_mpu_core_enable_regulator_vddio(struct inv_mpu6050_state *st)
 {
        int result;
 
        result = regulator_enable(st->vddio_supply);
        if (result) {
                dev_err(regmap_get_device(st->map),
-                       "Failed to enable regulator: %d\n", result);
+                       "Failed to enable vddio regulator: %d\n", result);
        } else {
                /* Give the device a little bit of time to start up. */
                usleep_range(35000, 70000);
@@ -1156,21 +1156,29 @@ static int inv_mpu_core_enable_regulator(struct inv_mpu6050_state *st)
        return result;
 }
 
-static int inv_mpu_core_disable_regulator(struct inv_mpu6050_state *st)
+static int inv_mpu_core_disable_regulator_vddio(struct inv_mpu6050_state *st)
 {
        int result;
 
        result = regulator_disable(st->vddio_supply);
        if (result)
                dev_err(regmap_get_device(st->map),
-                       "Failed to disable regulator: %d\n", result);
+                       "Failed to disable vddio regulator: %d\n", result);
 
        return result;
 }
 
 static void inv_mpu_core_disable_regulator_action(void *_data)
 {
-       inv_mpu_core_disable_regulator(_data);
+       struct inv_mpu6050_state *st = _data;
+       int result;
+
+       result = regulator_disable(st->vdd_supply);
+       if (result)
+               dev_err(regmap_get_device(st->map),
+                       "Failed to disable vdd regulator: %d\n", result);
+
+       inv_mpu_core_disable_regulator_vddio(st);
 }
 
 int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
@@ -1239,6 +1247,15 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
                return -EINVAL;
        }
 
+       st->vdd_supply = devm_regulator_get(dev, "vdd");
+       if (IS_ERR(st->vdd_supply)) {
+               if (PTR_ERR(st->vdd_supply) != -EPROBE_DEFER)
+                       dev_err(dev, "Failed to get vdd regulator %d\n",
+                               (int)PTR_ERR(st->vdd_supply));
+
+               return PTR_ERR(st->vdd_supply);
+       }
+
        st->vddio_supply = devm_regulator_get(dev, "vddio");
        if (IS_ERR(st->vddio_supply)) {
                if (PTR_ERR(st->vddio_supply) != -EPROBE_DEFER)
@@ -1248,9 +1265,17 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
                return PTR_ERR(st->vddio_supply);
        }
 
-       result = inv_mpu_core_enable_regulator(st);
-       if (result)
+       result = regulator_enable(st->vdd_supply);
+       if (result) {
+               dev_err(dev, "Failed to enable vdd regulator: %d\n", result);
                return result;
+       }
+
+       result = inv_mpu_core_enable_regulator_vddio(st);
+       if (result) {
+               regulator_disable(st->vdd_supply);
+               return result;
+       }
 
        result = devm_add_action_or_reset(dev, inv_mpu_core_disable_regulator_action,
                                 st);
@@ -1352,7 +1377,7 @@ static int inv_mpu_resume(struct device *dev)
        int result;
 
        mutex_lock(&st->lock);
-       result = inv_mpu_core_enable_regulator(st);
+       result = inv_mpu_core_enable_regulator_vddio(st);
        if (result)
                goto out_unlock;
 
@@ -1370,7 +1395,7 @@ static int inv_mpu_suspend(struct device *dev)
 
        mutex_lock(&st->lock);
        result = inv_mpu6050_set_power_itg(st, false);
-       inv_mpu_core_disable_regulator(st);
+       inv_mpu_core_disable_regulator_vddio(st);
        mutex_unlock(&st->lock);
 
        return result;

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index 52fcf45..4fcf683 100644 (file)
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -130,7 +130,8 @@ struct inv_mpu6050_hw {
  *  @chip_period:      chip internal period estimation (~1kHz).
  *  @it_timestamp:     timestamp from previous interrupt.
  *  @data_timestamp:   timestamp for next data sample.
- *  @vddio_supply      voltage regulator for the chip.
+ *  @vdd_supply:       VDD voltage regulator for the chip.
+ *  @vddio_supply      I/O voltage regulator for the chip.
  *  @magn_disabled:     magnetometer disabled for backward compatibility reason.
  *  @magn_raw_to_gauss:        coefficient to convert mag raw value to Gauss.
  *  @magn_orient:       magnetometer sensor chip orientation if available.
@@ -154,6 +155,7 @@ struct inv_mpu6050_state {
        s64 chip_period;
        s64 it_timestamp;
        s64 data_timestamp;
+       struct regulator *vdd_supply;
        struct regulator *vddio_supply;
        bool magn_disabled;
        s32 magn_raw_to_gauss[3];