x86/PCI: Add support for the ALi M1487 (IBC) PIRQ router

The ALi M1487 ISA Bus Controller (IBC), a part of the ALi FinALi 486
chipset, implements PCI interrupt steering with a PIRQ router[1] in the
form of four 4-bit mappings, spread across two PCI INTx Routing Table
Mapping Registers, available in the port I/O space accessible indirectly
via the index/data register pair at 0x22/0x23, located at indices 0x42
and 0x43 for the INT1/INT2 and INT3/INT4 lines respectively.

Additionally there is a separate PCI INTx Sensitivity Register at index
0x44 in the same port I/O space, whose bits 3:0 select the trigger mode
for INT[4:1] lines respectively[2].  Manufacturer's documentation says
that this register has to be set consistently with the relevant ELCR
register[3].  Add a router-specific hook then and use it to handle this
register.

Accesses to the port I/O space concerned here need to be unlocked by
writing the value of 0xc5 to the Lock Register at index 0x03
beforehand[4].  Do so then and then lock access after use for safety.

The IBC is implemented as a peer bridge on the host bus rather than a
southbridge on PCI and therefore it does not itself appear in the PCI
configuration space.  It is complemented by the M1489 Cache-Memory PCI
Controller (CMP) host-to-PCI bridge, so use that device's identification
for determining the presence of the IBC.

References:

[1] "M1489/M1487: 486 PCI Chip Set", Version 1.2, Acer Laboratories
    Inc., July 1997, Section 4: "Configuration Registers", pp. 76-77

[2] same, p. 77

[3] same, Section 5: "M1489/M1487 Software Programming Guide", pp.
    99-100

[4] same, Section 4: "Configuration Registers", p. 37

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2107191702020.9461@angie.orcam.me.uk

diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index d3a73f9..1bccbc4 100644 (file)
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -13,9 +13,12 @@
 #include <linux/dmi.h>
 #include <linux/io.h>
 #include <linux/smp.h>
+#include <linux/spinlock.h>
 #include <asm/io_apic.h>
 #include <linux/irq.h>
 #include <linux/acpi.h>
+
+#include <asm/pc-conf-reg.h>
 #include <asm/pci_x86.h>
 
 #define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24))
@@ -47,6 +50,8 @@ struct irq_router {
        int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq);
        int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq,
                int new);
+       int (*lvl)(struct pci_dev *router, struct pci_dev *dev, int pirq,
+               int irq);
 };
 
 struct irq_router_handler {
@@ -169,6 +174,139 @@ void elcr_set_level_irq(unsigned int irq)
        }
 }
 
+/*
+ *     PIRQ routing for the M1487 ISA Bus Controller (IBC) ASIC used
+ *     with the ALi FinALi 486 chipset.  The IBC is not decoded in the
+ *     PCI configuration space, so we identify it by the accompanying
+ *     M1489 Cache-Memory PCI Controller (CMP) ASIC.
+ *
+ *     There are four 4-bit mappings provided, spread across two PCI
+ *     INTx Routing Table Mapping Registers, available in the port I/O
+ *     space accessible indirectly via the index/data register pair at
+ *     0x22/0x23, located at indices 0x42 and 0x43 for the INT1/INT2
+ *     and INT3/INT4 lines respectively.  The INT1/INT3 and INT2/INT4
+ *     lines are mapped in the low and the high 4-bit nibble of the
+ *     corresponding register as follows:
+ *
+ *     0000 : Disabled
+ *     0001 : IRQ9
+ *     0010 : IRQ3
+ *     0011 : IRQ10
+ *     0100 : IRQ4
+ *     0101 : IRQ5
+ *     0110 : IRQ7
+ *     0111 : IRQ6
+ *     1000 : Reserved
+ *     1001 : IRQ11
+ *     1010 : Reserved
+ *     1011 : IRQ12
+ *     1100 : Reserved
+ *     1101 : IRQ14
+ *     1110 : Reserved
+ *     1111 : IRQ15
+ *
+ *     In addition to the usual ELCR register pair there is a separate
+ *     PCI INTx Sensitivity Register at index 0x44 in the same port I/O
+ *     space, whose bits 3:0 select the trigger mode for INT[4:1] lines
+ *     respectively.  Any bit set to 1 causes interrupts coming on the
+ *     corresponding line to be passed to ISA as edge-triggered and
+ *     otherwise they are passed as level-triggered.  Manufacturer's
+ *     documentation says this register has to be set consistently with
+ *     the relevant ELCR register.
+ *
+ *     Accesses to the port I/O space concerned here need to be unlocked
+ *     by writing the value of 0xc5 to the Lock Register at index 0x03
+ *     beforehand.  Any other value written to said register prevents
+ *     further accesses from reaching the register file, except for the
+ *     Lock Register being written with 0xc5 again.
+ *
+ *     References:
+ *
+ *     "M1489/M1487: 486 PCI Chip Set", Version 1.2, Acer Laboratories
+ *     Inc., July 1997
+ */
+
+#define PC_CONF_FINALI_LOCK            0x03u
+#define PC_CONF_FINALI_PCI_INTX_RT1    0x42u
+#define PC_CONF_FINALI_PCI_INTX_RT2    0x43u
+#define PC_CONF_FINALI_PCI_INTX_SENS   0x44u
+
+#define PC_CONF_FINALI_LOCK_KEY                0xc5u
+
+static u8 read_pc_conf_nybble(u8 base, u8 index)
+{
+       u8 reg = base + (index >> 1);
+       u8 x;
+
+       x = pc_conf_get(reg);
+       return index & 1 ? x >> 4 : x & 0xf;
+}
+
+static void write_pc_conf_nybble(u8 base, u8 index, u8 val)
+{
+       u8 reg = base + (index >> 1);
+       u8 x;
+
+       x = pc_conf_get(reg);
+       x = index & 1 ? (x & 0x0f) | (val << 4) : (x & 0xf0) | val;
+       pc_conf_set(reg, x);
+}
+
+static int pirq_finali_get(struct pci_dev *router, struct pci_dev *dev,
+                          int pirq)
+{
+       static const u8 irqmap[16] = {
+               0, 9, 3, 10, 4, 5, 7, 6, 0, 11, 0, 12, 0, 14, 0, 15
+       };
+       unsigned long flags;
+       u8 x;
+
+       raw_spin_lock_irqsave(&pc_conf_lock, flags);
+       pc_conf_set(PC_CONF_FINALI_LOCK, PC_CONF_FINALI_LOCK_KEY);
+       x = irqmap[read_pc_conf_nybble(PC_CONF_FINALI_PCI_INTX_RT1, pirq - 1)];
+       pc_conf_set(PC_CONF_FINALI_LOCK, 0);
+       raw_spin_unlock_irqrestore(&pc_conf_lock, flags);
+       return x;
+}
+
+static int pirq_finali_set(struct pci_dev *router, struct pci_dev *dev,
+                          int pirq, int irq)
+{
+       static const u8 irqmap[16] = {
+               0, 0, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15
+       };
+       u8 val = irqmap[irq];
+       unsigned long flags;
+
+       if (!val)
+               return 0;
+
+       raw_spin_lock_irqsave(&pc_conf_lock, flags);
+       pc_conf_set(PC_CONF_FINALI_LOCK, PC_CONF_FINALI_LOCK_KEY);
+       write_pc_conf_nybble(PC_CONF_FINALI_PCI_INTX_RT1, pirq - 1, val);
+       pc_conf_set(PC_CONF_FINALI_LOCK, 0);
+       raw_spin_unlock_irqrestore(&pc_conf_lock, flags);
+       return 1;
+}
+
+static int pirq_finali_lvl(struct pci_dev *router, struct pci_dev *dev,
+                          int pirq, int irq)
+{
+       u8 mask = ~(1u << (pirq - 1));
+       unsigned long flags;
+       u8 trig;
+
+       elcr_set_level_irq(irq);
+       raw_spin_lock_irqsave(&pc_conf_lock, flags);
+       pc_conf_set(PC_CONF_FINALI_LOCK, PC_CONF_FINALI_LOCK_KEY);
+       trig = pc_conf_get(PC_CONF_FINALI_PCI_INTX_SENS);
+       trig &= mask;
+       pc_conf_set(PC_CONF_FINALI_PCI_INTX_SENS, trig);
+       pc_conf_set(PC_CONF_FINALI_LOCK, 0);
+       raw_spin_unlock_irqrestore(&pc_conf_lock, flags);
+       return 1;
+}
+
 /*
  * Common IRQ routing practice: nibbles in config space,
  * offset by some magic constant.
@@ -745,6 +883,12 @@ static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router,
 static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
        switch (device) {
+       case PCI_DEVICE_ID_AL_M1489:
+               r->name = "FinALi";
+               r->get = pirq_finali_get;
+               r->set = pirq_finali_set;
+               r->lvl = pirq_finali_lvl;
+               return 1;
        case PCI_DEVICE_ID_AL_M1533:
        case PCI_DEVICE_ID_AL_M1563:
                r->name = "ALI";
@@ -968,11 +1112,17 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
        } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
        ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
                msg = "found";
-               elcr_set_level_irq(irq);
+               if (r->lvl)
+                       r->lvl(pirq_router_dev, dev, pirq, irq);
+               else
+                       elcr_set_level_irq(irq);
        } else if (newirq && r->set &&
                (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
                if (r->set(pirq_router_dev, dev, pirq, newirq)) {
-                       elcr_set_level_irq(newirq);
+                       if (r->lvl)
+                               r->lvl(pirq_router_dev, dev, pirq, newirq);
+                       else
+                               elcr_set_level_irq(newirq);
                        msg = "assigned";
                        irq = newirq;
                }

diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 4bac183..256fa4d 100644 (file)
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1121,6 +1121,7 @@
 #define PCI_DEVICE_ID_3COM_3CR990SVR   0x990a
 
 #define PCI_VENDOR_ID_AL               0x10b9
+#define PCI_DEVICE_ID_AL_M1489         0x1489
 #define PCI_DEVICE_ID_AL_M1533         0x1533
 #define PCI_DEVICE_ID_AL_M1535         0x1535
 #define PCI_DEVICE_ID_AL_M1541         0x1541