PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()

NXP Layerscape (ls1028a, ls2088a), dra7xxx and imx6 platforms are either
programmed or statically configured to forward the error triggered by a
link-down state (eg no connected endpoint device) on the system bus for
PCI configuration transactions; these errors are reported as an SError
at system level, which is fatal.

Enumerating a PCI tree when the PCIe link is down is not sensible
either, so even if the link-up check is racy (link can go down after
map_bus() is called) add a link-up check in map_bus() to prevent issuing
configuration transactions when the link is down.

SError report:

 SError Interrupt on CPU2, code 0xbf000002 -- SError
 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67
 Hardware name: LS1046A RDB Board (DT)
 pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
 pc : pci_generic_config_read+0x3c/0xe0
 lr : pci_generic_config_read+0x24/0xe0
 sp : ffff80001003b7b0
 x29: ffff80001003b7b0 x28: ffff80001003ba74
 x27: ffff000971d96800 x26: ffff00096e77e0a8
 x25: ffff80001003b874 x24: ffff80001003b924
 x23: 0000000000000004 x22: 0000000000000000
 x21: 0000000000000000 x20: ffff80001003b874
 x19: 0000000000000004 x18: ffffffffffffffff
 x17: 00000000000000c0 x16: fffffe0025981840
 x15: ffffb94c75b69948 x14: 62203a383634203a
 x13: 666e6f635f726568 x12: 202c31203d207265
 x11: 626d756e3e2d7375 x10: 656877202c307830
 x9 : 203d206e66766564 x8 : 0000000000000908
 x7 : 0000000000000908 x6 : ffff800010900000
 x5 : ffff00096e77e080 x4 : 0000000000000000
 x3 : 0000000000000003 x2 : 84fa3440ff7e7000
 x1 : 0000000000000000 x0 : ffff800010034000
 Kernel panic - not syncing: Asynchronous SError Interrupt
 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67
 Hardware name: LS1046A RDB Board (DT)
 Call trace:
  dump_backtrace+0x0/0x1c0
  show_stack+0x18/0x28
  dump_stack+0xd8/0x134
  panic+0x180/0x398
  add_taint+0x0/0xb0
  arm64_serror_panic+0x78/0x88
  do_serror+0x68/0x180
  el1_error+0x84/0x100
  pci_generic_config_read+0x3c/0xe0
  dw_pcie_rd_other_conf+0x78/0x110
  pci_bus_read_config_dword+0x88/0xe8
  pci_bus_generic_read_dev_vendor_id+0x30/0x1b0
  pci_bus_read_dev_vendor_id+0x4c/0x78
  pci_scan_single_device+0x80/0x100

Link: https://lore.kernel.org/r/20200916054130.8685-1-Zhiqiang.Hou@nxp.com
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log, remove Fixes tag]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index d02c7e7..674f32d 100644 (file)
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -444,6 +444,17 @@ static void __iomem *dw_pcie_other_conf_map_bus(struct pci_bus *bus,
        struct pcie_port *pp = bus->sysdata;
        struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 
+       /*
+        * Checking whether the link is up here is a last line of defense
+        * against platforms that forward errors on the system bus as
+        * SError upon PCI configuration transactions issued when the link
+        * is down. This check is racy by definition and does not stop
+        * the system from triggering an SError if the link goes down
+        * after this check is performed.
+        */
+       if (!dw_pcie_link_up(pci))
+               return NULL;
+
        busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
                 PCIE_ATU_FUNC(PCI_FUNC(devfn));