ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs

This common descirption is included by all Facebook AST2600 Network BMC
platforms to minimize duplicated device entries across Facebook Network
BMC device trees.

Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210805222818.8391-4-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>

diff --git a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
new file mode 100644 (file)
index 0000000..051de5b
--- /dev/null
+++ b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+       aliases {
+               mmc0 = &emmc;
+               spi1 = &spi1;
+               spi2 = &spi_gpio;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,9600n8 root=/dev/ram rw vmalloc=640M";
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x80000000 0x80000000>;
+       };
+
+       /*
+        * GPIO-based SPI Master is required to access SPI TPM, because
+        * full-duplex SPI transactions are not supported by ASPEED SPI
+        * Controllers.
+        */
+       spi_gpio: spi-gpio {
+               status = "okay";
+               compatible = "spi-gpio";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+               gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+               gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+
+               tpmdev@0 {
+                       compatible = "tcg,tpm_tis-spi";
+                       spi-max-frequency = <33000000>;
+                       reg = <0>;
+               };
+       };
+};
+
+&fmc {
+       status = "okay";
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "spi0.0";
+
+#include "facebook-bmc-flash-layout-128.dtsi"
+       };
+
+       flash@1 {
+               status = "okay";
+               m25p,fast-read;
+               label = "spi0.1";
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       flash1@0 {
+                               reg = <0x0 0x8000000>;
+                               label = "flash1";
+                       };
+               };
+       };
+};
+
+&spi1 {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&uart5 {
+       status = "okay";
+};
+
+&wdt1 {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+};
+
+&i2c1 {
+       status = "okay";
+};
+
+&i2c2 {
+       status = "okay";
+};
+
+&i2c3 {
+       status = "okay";
+};
+
+&i2c4 {
+       status = "okay";
+};
+
+&i2c5 {
+       status = "okay";
+};
+
+&i2c6 {
+       status = "okay";
+};
+
+&i2c7 {
+       status = "okay";
+};
+
+&i2c8 {
+       status = "okay";
+};
+
+&i2c9 {
+       status = "okay";
+};
+
+&i2c10 {
+       status = "okay";
+};
+
+&i2c12 {
+       status = "okay";
+};
+
+&i2c13 {
+       status = "okay";
+};
+
+&i2c15 {
+       status = "okay";
+};
+
+&vhub {
+       status = "okay";
+};
+
+&emmc_controller {
+       status = "okay";
+};
+
+&emmc {
+       status = "okay";
+
+       non-removable;
+       max-frequency = <25000000>;
+       bus-width = <4>;
+};
+
+&rtc {
+       status = "okay";
+};