Nicolas Ferre <nicolas.ferre@microchip.com> <nicolas.ferre@atmel.com>
Nicolas Pitre <nico@fluxnic.net> <nicolas.pitre@linaro.org>
Nicolas Pitre <nico@fluxnic.net> <nico@linaro.org>
+Nicolas Saenz Julienne <nsaenz@kernel.org> <nsaenzjulienne@suse.de>
+Nicolas Saenz Julienne <nsaenz@kernel.org> <nsaenzjulienne@suse.com>
Oleksij Rempel <linux@rempel-privat.de> <bug-track@fisher-privat.net>
Oleksij Rempel <linux@rempel-privat.de> <external.Oleksij.Rempel@de.bosch.com>
Oleksij Rempel <linux@rempel-privat.de> <fixed-term.Oleksij.Rempel@de.bosch.com>
N: rockchip
ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES
-M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
S: Maintained
N: visconti
ARM/UNIPHIER ARCHITECTURE
+M: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+M: Masami Hiramatsu <mhiramat@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Orphan
+S: Maintained
F: Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
F: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
F: Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
F: include/linux/platform_data/b53.h
BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
-M: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+M: Nicolas Saenz Julienne <nsaenz@kernel.org>
L: bcm-kernel-feedback-list@broadcom.com
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: include/dt-bindings/*/*max77802.h
MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
-M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-pm@vger.kernel.org
S: Supported
MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BOARDS
M: Chanwoo Choi <cw00.choi@samsung.com>
-M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
S: Supported
F: mm/memblock.c
MEMORY CONTROLLER DRIVERS
-M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
L: linux-kernel@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl.git
F: drivers/regulator/pf8x00-regulator.c
NXP PTN5150A CC LOGIC AND EXTCON DRIVER
-M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
PIN CONTROLLER - SAMSUNG
M: Tomasz Figa <tomasz.figa@gmail.com>
-M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
F: security/safesetid/
SAMSUNG AUDIO (ASoC) DRIVERS
-M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/samsung/
SAMSUNG EXYNOS PSEUDO RANDOM NUMBER GENERATOR (RNG) DRIVER
-M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
L: linux-crypto@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Maintained
F: drivers/platform/x86/samsung-laptop.c
SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
-M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
F: include/media/drv-intf/s3c_camif.h
SAMSUNG S3FWRN5 NFC DRIVER
-M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
M: Krzysztof Opasiak <k.opasiak@samsung.com>
L: linux-nfc@lists.01.org (moderated for non-subscribers)
S: Maintained
F: drivers/media/i2c/s5k5baf.c
SAMSUNG S5P Security SubSystem (SSS) DRIVER
-M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
M: Vladimir Zapolskiy <vz@mleia.com>
L: linux-crypto@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
F: include/linux/platform_data/clk-s3c2410.h
SAMSUNG SPI DRIVERS
-M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
M: Andi Shyti <andi@etezian.org>
L: linux-spi@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
&l4_cfg { /* 0x4a000000 */
- compatible = "ti,dra7-l4-cfg", "simple-bus";
+ compatible = "ti,dra7-l4-cfg", "simple-pm-bus";
+ power-domains = <&prm_coreaon>;
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_L4_CFG_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x4a000000 0x800>,
<0x4a000800 0x800>,
<0x4a001000 0x1000>;
<0x00200000 0x4a200000 0x100000>; /* segment 2 */
segment@0 { /* 0x4a000000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
segment@100000 { /* 0x4a100000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00002000 0x00102000 0x001000>, /* ap 27 */
};
target-module@40000 { /* 0x4a140000, ap 31 06.0 */
- compatible = "ti,sysc";
- status = "disabled";
- #address-cells = <1>;
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x400fc 4>,
+ <0x41100 4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ power-domains = <&prm_l3init>;
+ clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 0>;
+ clock-names = "fck";
#size-cells = <1>;
+ #address-cells = <1>;
ranges = <0x0 0x40000 0x10000>;
+
+ sata: sata@0 {
+ compatible = "snps,dwc-ahci";
+ reg = <0 0x1100>, <0x1100 0x8>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
+ ports-implemented = <0x1>;
+ };
};
target-module@51000 { /* 0x4a151000, ap 33 50.0 */
};
segment@200000 { /* 0x4a200000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00018000 0x00218000 0x001000>, /* ap 43 */
};
&l4_per1 { /* 0x48000000 */
- compatible = "ti,dra7-l4-per1", "simple-bus";
+ compatible = "ti,dra7-l4-per1", "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l4per_clkctrl DRA7_L4PER_L4_PER1_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x48000000 0x800>,
<0x48000800 0x800>,
<0x48001000 0x400>,
<0x00200000 0x48200000 0x200000>; /* segment 1 */
segment@0 { /* 0x48000000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
segment@200000 { /* 0x48200000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
&l4_per2 { /* 0x48400000 */
- compatible = "ti,dra7-l4-per2", "simple-bus";
+ compatible = "ti,dra7-l4-per2", "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_L4_PER2_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x48400000 0x800>,
<0x48400800 0x800>,
<0x48401000 0x400>,
<0x48454000 0x48454000 0x400000>; /* L3 data port */
segment@0 { /* 0x48400000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
&l4_per3 { /* 0x48800000 */
- compatible = "ti,dra7-l4-per3", "simple-bus";
+ compatible = "ti,dra7-l4-per3", "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_L4_PER3_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x48800000 0x800>,
<0x48800800 0x800>,
<0x48801000 0x400>,
ranges = <0x00000000 0x48800000 0x200000>; /* segment 0 */
segment@0 { /* 0x48800000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
&l4_wkup { /* 0x4ae00000 */
- compatible = "ti,dra7-l4-wkup", "simple-bus";
+ compatible = "ti,dra7-l4-wkup", "simple-pm-bus";
+ power-domains = <&prm_wkupaon>;
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_L4_WKUP_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x4ae00000 0x800>,
<0x4ae00800 0x800>,
<0x4ae01000 0x1000>;
<0x00030000 0x4ae30000 0x010000>; /* segment 3 */
segment@0 { /* 0x4ae00000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
segment@10000 { /* 0x4ae10000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */
};
segment@20000 { /* 0x4ae20000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */
};
segment@30000 { /* 0x4ae30000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0000c000 0x0003c000 0x002000>, /* ap 30 */
};
};
- /*
- * The soc node represents the soc top level view. It is used for IPs
- * that are not memory mapped in the MPU view or for the MPU itself.
- */
- soc {
- compatible = "ti,omap-infra";
- mpu {
- compatible = "ti,omap5-mpu";
- ti,hwmods = "mpu";
- };
- };
-
/*
* XXX: Use a flat representation of the SOC interconnect.
* The real OMAP interconnect network is quite complex.
* hierarchy.
*/
ocp: ocp {
- compatible = "ti,dra7-l3-noc", "simple-bus";
+ compatible = "simple-pm-bus";
+ power-domains = <&prm_core>;
+ clocks = <&l3main1_clkctrl DRA7_L3MAIN1_L3_MAIN_1_CLKCTRL 0>,
+ <&l3instr_clkctrl DRA7_L3INSTR_L3_MAIN_2_CLKCTRL 0>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0xc0000000>;
dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
- ti,hwmods = "l3_main_1", "l3_main_2";
- reg = <0x0 0x44000000 0x0 0x1000000>,
- <0x0 0x45000000 0x0 0x1000>;
- interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ l3-noc@44000000 {
+ compatible = "ti,dra7-l3-noc";
+ reg = <0x44000000 0x1000>,
+ <0x45000000 0x1000>;
+ interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
l4_cfg: interconnect@4a000000 {
};
};
l4_per1: interconnect@48000000 {
};
+
+ target-module@48210000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_mpu>;
+ clocks = <&mpu_clkctrl DRA7_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48210000 0x1f0000>;
+
+ mpu {
+ compatible = "ti,omap5-mpu";
+ };
+ };
+
l4_per2: interconnect@48400000 {
};
l4_per3: interconnect@48800000 {
};
- axi@0 {
- compatible = "simple-bus";
+ /*
+ * Register access seems to have complex dependencies and also
+ * seems to need an enabled phy. See the TRM chapter for "Table
+ * 26-678. Main Sequence PCIe Controller Global Initialization"
+ * and also dra7xx_pcie_probe().
+ */
+ axi0: target-module@51000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ power-domains = <&prm_l3init>;
+ resets = <&prm_l3init 0>;
+ reset-names = "rstctrl";
+ clocks = <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 0>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>;
+ clock-names = "fck", "phy-clk", "phy-clk-div";
#size-cells = <1>;
#address-cells = <1>;
- ranges = <0x51000000 0x51000000 0x3000
- 0x0 0x20000000 0x10000000>;
+ ranges = <0x51000000 0x51000000 0x3000>,
+ <0x20000000 0x20000000 0x10000000>;
dma-ranges;
/**
* To enable PCI endpoint mode, disable the pcie1_rc
* node and enable pcie1_ep mode.
*/
pcie1_rc: pcie@51000000 {
- reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+ reg = <0x51000000 0x2000>,
+ <0x51002000 0x14c>,
+ <0x20001000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
interrupts = <0 232 0x4>, <0 233 0x4>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- ranges = <0x81000000 0 0 0x03000 0 0x00010000
- 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>,
+ <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
linux,pci-domain = <0>;
- ti,hwmods = "pcie1";
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
};
pcie1_ep: pcie_ep@51000000 {
- reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
+ reg = <0x51000000 0x28>,
+ <0x51002000 0x14c>,
+ <0x51001000 0x28>,
+ <0x20001000 0x10000000>;
reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
interrupts = <0 232 0x4>;
num-lanes = <1>;
num-ib-windows = <4>;
num-ob-windows = <16>;
- ti,hwmods = "pcie1";
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
};
};
- axi@1 {
- compatible = "simple-bus";
+ /*
+ * Register access seems to have complex dependencies and also
+ * seems to need an enabled phy. See the TRM chapter for "Table
+ * 26-678. Main Sequence PCIe Controller Global Initialization"
+ * and also dra7xx_pcie_probe().
+ */
+ axi1: target-module@51800000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ clocks = <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 0>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>;
+ clock-names = "fck", "phy-clk", "phy-clk-div";
+ power-domains = <&prm_l3init>;
+ resets = <&prm_l3init 1>;
+ reset-names = "rstctrl";
#size-cells = <1>;
#address-cells = <1>;
- ranges = <0x51800000 0x51800000 0x3000
- 0x0 0x30000000 0x10000000>;
+ ranges = <0x51800000 0x51800000 0x3000>,
+ <0x30000000 0x30000000 0x10000000>;
dma-ranges;
status = "disabled";
pcie2_rc: pcie@51800000 {
- reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
+ reg = <0x51800000 0x2000>,
+ <0x51802000 0x14c>,
+ <0x30001000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
interrupts = <0 355 0x4>, <0 356 0x4>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- ranges = <0x81000000 0 0 0x03000 0 0x00010000
- 0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+ ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>,
+ <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
linux,pci-domain = <1>;
- ti,hwmods = "pcie2";
phys = <&pcie2_phy>;
phy-names = "pcie-phy0";
interrupt-map-mask = <0 0 0 7>;
target-module@43300000 {
compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x43300000 0x4>;
- reg-names = "rev";
+ reg = <0x43300000 0x4>,
+ <0x43300010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
target-module@43400000 {
compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x43400000 0x4>;
- reg-names = "rev";
+ reg = <0x43400000 0x4>,
+ <0x43400010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
target-module@43500000 {
compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x43500000 0x4>;
- reg-names = "rev";
+ reg = <0x43500000 0x4>,
+ <0x43500010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
};
};
- dmm@4e000000 {
- compatible = "ti,omap5-dmm";
- reg = <0x4e000000 0x800>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "dmm";
+ target-module@4e000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4e000000 0x4>,
+ <0x4e000010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ranges = <0x0 0x4e000000 0x2000000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ dmm@0 {
+ compatible = "ti,omap5-dmm";
+ reg = <0 0x800>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
ipu1: ipu@58820000 {
>;
};
- qspi: spi@4b300000 {
- compatible = "ti,dra7xxx-qspi";
- reg = <0x4b300000 0x100>,
- <0x5c000000 0x4000000>;
- reg-names = "qspi_base", "qspi_mmap";
- syscon-chipselects = <&scm_conf 0x558>;
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "qspi";
- clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
+ target-module@4b300000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x4b300000 0x4>,
+ <0x4b300010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 0>;
clock-names = "fck";
- num-cs = <4>;
- interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- /* OCP2SCP3 */
- sata: sata@4a141100 {
- compatible = "snps,dwc-ahci";
- reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&sata_phy>;
- phy-names = "sata-phy";
- clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
- ti,hwmods = "sata";
- ports-implemented = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b300000 0x1000>,
+ <0x5c000000 0x5c000000 0x4000000>;
+
+ qspi: spi@0 {
+ compatible = "ti,dra7xxx-qspi";
+ reg = <0 0x100>,
+ <0x5c000000 0x4000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ syscon-chipselects = <&scm_conf 0x558>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
+ clock-names = "fck";
+ num-cs = <4>;
+ interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
};
/* OCP2SCP1 */
// SPDX-License-Identifier: GPL-2.0
&l4_cfg { /* 0x4a000000 */
- compatible = "ti,omap4-l4-cfg", "simple-bus";
+ compatible = "ti,omap4-l4-cfg", "simple-pm-bus";
+ power-domains = <&prm_core>;
+ clocks = <&l4_cfg_clkctrl OMAP4_L4_CFG_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x4a000000 0x800>,
<0x4a000800 0x800>,
<0x4a001000 0x1000>;
<0x00300000 0x4a300000 0x080000>; /* segment 6 */
segment@0 { /* 0x4a000000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
target-module@2000 { /* 0x4a002000, ap 3 06.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "ctrl_module_core";
reg = <0x2000 0x4>,
<0x2010 0x4>;
reg-names = "rev", "sysc";
};
segment@80000 { /* 0x4a080000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */
};
segment@100000 { /* 0x4a100000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00100000 0x001000>, /* ap 21 */
target-module@0 { /* 0x4a100000, ap 21 2a.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "ctrl_module_pad_core";
reg = <0x0 0x4>,
<0x10 0x4>;
reg-names = "rev", "sysc";
};
segment@180000 { /* 0x4a180000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
};
segment@200000 { /* 0x4a200000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 31 */
};
segment@280000 { /* 0x4a280000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
};
l4_cfg_segment_300000: segment@300000 { /* 0x4a300000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */
};
&l4_wkup { /* 0x4a300000 */
- compatible = "ti,omap4-l4-wkup", "simple-bus";
+ compatible = "ti,omap4-l4-wkup", "simple-pm-bus";
+ power-domains = <&prm_wkup>;
+ clocks = <&l4_wkup_clkctrl OMAP4_L4_WKUP_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x4a300000 0x800>,
<0x4a300800 0x800>,
<0x4a301000 0x1000>;
<0x00020000 0x4a320000 0x010000>; /* segment 2 */
segment@0 { /* 0x4a300000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
target-module@c000 { /* 0x4a30c000, ap 19 2c.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "ctrl_module_wkup";
reg = <0xc000 0x4>,
<0xc010 0x4>;
reg-names = "rev", "sysc";
};
segment@10000 { /* 0x4a310000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */
target-module@e000 { /* 0x4a31e000, ap 21 30.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "ctrl_module_pad_wkup";
reg = <0xe000 0x4>,
<0xe010 0x4>;
reg-names = "rev", "sysc";
};
segment@20000 { /* 0x4a320000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */
};
&l4_per { /* 0x48000000 */
- compatible = "ti,omap4-l4-per", "simple-bus";
+ compatible = "ti,omap4-l4-per", "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l4_per_clkctrl OMAP4_L4_PER_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x48000000 0x800>,
<0x48000800 0x800>,
<0x48001000 0x400>,
<0x00200000 0x48200000 0x200000>; /* segment 1 */
segment@0 { /* 0x48000000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
segment@200000 { /* 0x48200000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00150000 0x00350000 0x001000>, /* ap 77 */
};
/*
- * Note that 4430 needs cross trigger interface (CTI) supported
- * before we can configure the interrupts. This means sampling
- * events are not supported for pmu. Note that 4460 does not use
- * CTI, see also 4460.dtsi.
+ * Needed early by omap4_sram_init() for barrier, do not move to l3
+ * interconnect as simple-pm-bus probes at module_init() time.
*/
- pmu {
- compatible = "arm,cortex-a9-pmu";
- ti,hwmods = "debugss";
+ ocmcram: sram@40304000 {
+ compatible = "mmio-sram";
+ reg = <0x40304000 0xa000>; /* 40k */
};
gic: interrupt-controller@48241000 {
interrupt-parent = <&gic>;
};
- /*
- * The soc node represents the soc top level view. It is used for IPs
- * that are not memory mapped in the MPU view or for the MPU itself.
- */
- soc {
- compatible = "ti,omap-infra";
- mpu {
- compatible = "ti,omap4-mpu";
- ti,hwmods = "mpu";
- sram = <&ocmcram>;
- };
- };
-
/*
* XXX: Use a flat representation of the OMAP4 interconnect.
* The real OMAP interconnect network is quite complex.
* hierarchy.
*/
ocp {
- compatible = "ti,omap4-l3-noc", "simple-bus";
+ compatible = "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l3_1_clkctrl OMAP4_L3_MAIN_1_CLKCTRL 0>,
+ <&l3_2_clkctrl OMAP4_L3_MAIN_2_CLKCTRL 0>,
+ <&l3_instr_clkctrl OMAP4_L3_MAIN_3_CLKCTRL 0>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
- reg = <0x44000000 0x1000>,
- <0x44800000 0x2000>,
- <0x45000000 0x1000>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ l3-noc@44000000 {
+ compatible = "ti,omap4-l3-noc";
+ reg = <0x44000000 0x1000>,
+ <0x44800000 0x2000>,
+ <0x45000000 0x1000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
l4_wkup: interconnect@4a300000 {
};
l4_per: interconnect@48000000 {
};
- l4_abe: interconnect@40100000 {
+ target-module@48210000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_mpu>;
+ clocks = <&mpuss_clkctrl OMAP4_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48210000 0x1f0000>;
+
+ mpu {
+ compatible = "ti,omap4-mpu";
+ sram = <&ocmcram>;
+ };
};
- ocmcram: sram@40304000 {
- compatible = "mmio-sram";
- reg = <0x40304000 0xa000>; /* 40k */
+ l4_abe: interconnect@40100000 {
};
target-module@50000000 {
target-module@52000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "iss";
reg = <0x52000000 0x4>,
<0x52000010 0x4>;
reg-names = "rev", "sysc";
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
ti,sysc-delay-us = <2>;
+ power-domains = <&prm_cam>;
clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
/* No child device binding, driver in staging */
};
+ /*
+ * Note that 4430 needs cross trigger interface (CTI) supported
+ * before we can configure the interrupts. This means sampling
+ * events are not supported for pmu. Note that 4460 does not use
+ * CTI, see also 4460.dtsi.
+ */
+ target-module@54000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_emu>;
+ clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x54000000 0x1000000>;
+
+ pmu: pmu {
+ compatible = "arm,cortex-a9-pmu";
+ };
+ };
+
target-module@55082000 {
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x55082000 0x4>,
/* No child device binding or driver in mainline */
};
- dmm@4e000000 {
- compatible = "ti,omap4-dmm";
- reg = <0x4e000000 0x800>;
- interrupts = <0 113 0x4>;
- ti,hwmods = "dmm";
+ target-module@4e000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4e000000 0x4>,
+ <0x4e000010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ranges = <0x0 0x4e000000 0x2000000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ dmm@0 {
+ compatible = "ti,omap4-dmm";
+ reg = <0 0x800>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
- emif1: emif@4c000000 {
- compatible = "ti,emif-4d";
- reg = <0x4c000000 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "emif1";
- ti,no-idle-on-init;
- phy-type = <1>;
- hw-caps-read-idle-ctrl;
- hw-caps-ll-interface;
- hw-caps-temp-alert;
+ target-module@4c000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4c000000 0x4>;
+ reg-names = "rev";
+ clocks = <&l3_emif_clkctrl OMAP4_EMIF1_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000000 0x1000000>;
+
+ emif1: emif@0 {
+ compatible = "ti,emif-4d";
+ reg = <0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
- emif2: emif@4d000000 {
- compatible = "ti,emif-4d";
- reg = <0x4d000000 0x100>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "emif2";
- ti,no-idle-on-init;
- phy-type = <1>;
- hw-caps-read-idle-ctrl;
- hw-caps-ll-interface;
- hw-caps-temp-alert;
+ target-module@4d000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4d000000 0x4>;
+ reg-names = "rev";
+ clocks = <&l3_emif_clkctrl OMAP4_EMIF2_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4d000000 0x1000000>;
+
+ emif2: emif@0 {
+ compatible = "ti,emif-4d";
+ reg = <0 0x100>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
dsp: dsp {
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
+ power-domains = <&prm_gfx>;
clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
};
};
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "debugss";
- };
-
thermal-zones {
#include "omap4-cpu-thermal.dtsi"
};
<0x00030000 0x00030000 0x00010000>;
};
+&pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+};
+
/include/ "omap446x-clocks.dtsi"
&l4_cfg { /* 0x4a000000 */
- compatible = "ti,omap5-l4-cfg", "simple-bus";
+ compatible = "ti,omap5-l4-cfg", "simple-pm-bus";
+ power-domains = <&prm_core>;
+ clocks = <&l4cfg_clkctrl OMAP5_L4_CFG_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x4a000000 0x800>,
<0x4a000800 0x800>,
<0x4a001000 0x1000>;
<0x00300000 0x4a300000 0x080000>; /* segment 6 */
segment@0 { /* 0x4a000000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
segment@80000 { /* 0x4a080000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */
};
segment@100000 { /* 0x4a100000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00002000 0x00102000 0x001000>, /* ap 59 */
};
target-module@40000 { /* 0x4a140000, ap 101 16.0 */
- compatible = "ti,sysc";
- status = "disabled";
- #address-cells = <1>;
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x400fc 4>,
+ <0x41100 4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ power-domains = <&prm_l3init>;
+ clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 0>;
+ clock-names = "fck";
#size-cells = <1>;
+ #address-cells = <1>;
ranges = <0x0 0x40000 0x10000>;
+
+ sata: sata@0 {
+ compatible = "snps,dwc-ahci";
+ reg = <0 0x1100>, <0x1100 0x8>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
+ ports-implemented = <0x1>;
+ };
};
};
segment@180000 { /* 0x4a180000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
};
segment@200000 { /* 0x4a200000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 29 */
};
segment@280000 { /* 0x4a280000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
};
segment@300000 { /* 0x4a300000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
&l4_per { /* 0x48000000 */
- compatible = "ti,omap5-l4-per", "simple-bus";
+ compatible = "ti,omap5-l4-per", "simple-pm-bus";
+ power-domains = <&prm_core>;
+ clocks = <&l4per_clkctrl OMAP5_L4_PER_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x48000000 0x800>,
<0x48000800 0x800>,
<0x48001000 0x400>,
<0x00200000 0x48200000 0x200000>; /* segment 1 */
segment@0 { /* 0x48000000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
segment@200000 { /* 0x48200000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
&l4_wkup { /* 0x4ae00000 */
- compatible = "ti,omap5-l4-wkup", "simple-bus";
+ compatible = "ti,omap5-l4-wkup", "simple-pm-bus";
+ power-domains = <&prm_wkupaon>;
+ clocks = <&wkupaon_clkctrl OMAP5_L4_WKUP_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x4ae00000 0x800>,
<0x4ae00800 0x800>,
<0x4ae01000 0x1000>;
<0x00020000 0x4ae20000 0x010000>; /* segment 2 */
segment@0 { /* 0x4ae00000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
segment@10000 { /* 0x4ae10000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */
};
segment@20000 { /* 0x4ae20000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
};
+ /*
+ * Needed early by omap4_sram_init() for barrier, do not move to l3
+ * interconnect as simple-pm-bus probes at module_init() time.
+ */
+ ocmcram: sram@40300000 {
+ compatible = "mmio-sram";
+ reg = <0 0x40300000 0 0x20000>; /* 128k */
+ };
+
gic: interrupt-controller@48211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
interrupt-parent = <&gic>;
};
- /*
- * The soc node represents the soc top level view. It is used for IPs
- * that are not memory mapped in the MPU view or for the MPU itself.
- */
- soc {
- compatible = "ti,omap-infra";
- mpu {
- compatible = "ti,omap4-mpu";
- ti,hwmods = "mpu";
- sram = <&ocmcram>;
- };
- };
-
/*
* XXX: Use a flat representation of the OMAP3 interconnect.
* The real OMAP interconnect network is quite complex.
* hierarchy.
*/
ocp {
- compatible = "ti,omap5-l3-noc", "simple-bus";
+ compatible = "simple-pm-bus";
+ power-domains = <&prm_core>;
+ clocks = <&l3main1_clkctrl OMAP5_L3_MAIN_1_CLKCTRL 0>,
+ <&l3main2_clkctrl OMAP5_L3_MAIN_2_CLKCTRL 0>,
+ <&l3instr_clkctrl OMAP5_L3_MAIN_3_CLKCTRL 0>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xc0000000>;
dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
- ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
- reg = <0 0x44000000 0 0x2000>,
- <0 0x44800000 0 0x3000>,
- <0 0x45000000 0 0x4000>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ l3-noc@44000000 {
+ compatible = "ti,omap5-l3-noc";
+ reg = <0x44000000 0x2000>,
+ <0x44800000 0x3000>,
+ <0x45000000 0x4000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
l4_wkup: interconnect@4ae00000 {
};
l4_per: interconnect@48000000 {
};
- l4_abe: interconnect@40100000 {
+ target-module@48210000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_mpu>;
+ clocks = <&mpu_clkctrl OMAP5_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48210000 0x1f0000>;
+
+ mpu {
+ compatible = "ti,omap4-mpu";
+ sram = <&ocmcram>;
+ };
};
- ocmcram: sram@40300000 {
- compatible = "mmio-sram";
- reg = <0x40300000 0x20000>; /* 128k */
+ l4_abe: interconnect@40100000 {
};
- gpmc: gpmc@50000000 {
- compatible = "ti,omap4430-gpmc";
- reg = <0x50000000 0x1000>;
- #address-cells = <2>;
- #size-cells = <1>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&sdma 4>;
- dma-names = "rxtx";
- gpmc,num-cs = <8>;
- gpmc,num-waitpins = <4>;
- ti,hwmods = "gpmc";
- clocks = <&l3_iclk_div>;
+ target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000000 4>,
+ <0x50000010 4>,
+ <0x50000014 4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ ti,no-idle-on-init;
+ clocks = <&l3main2_clkctrl OMAP5_L3_MAIN_2_GPMC_CLKCTRL 0>;
clock-names = "fck";
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+ <0x00000000 0x00000000 0x40000000>; /* data */
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,omap4430-gpmc";
+ reg = <0x50000000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 4>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ clock-names = "fck";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
target-module@55082000 {
status = "disabled";
};
- dmm@4e000000 {
- compatible = "ti,omap5-dmm";
- reg = <0x4e000000 0x800>;
- interrupts = <0 113 0x4>;
- ti,hwmods = "dmm";
+ target-module@4e000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4e000000 0x4>,
+ <0x4e000010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ranges = <0x0 0x4e000000 0x2000000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ dmm@0 {
+ compatible = "ti,omap5-dmm";
+ reg = <0 0x800>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
- emif1: emif@4c000000 {
- compatible = "ti,emif-4d5";
- ti,hwmods = "emif1";
- ti,no-idle-on-init;
- phy-type = <2>; /* DDR PHY type: Intelli PHY */
- reg = <0x4c000000 0x400>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- hw-caps-read-idle-ctrl;
- hw-caps-ll-interface;
- hw-caps-temp-alert;
+ target-module@4c000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4c000000 0x4>;
+ reg-names = "rev";
+ clocks = <&emif_clkctrl OMAP5_EMIF1_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000000 0x1000000>;
+
+ emif1: emif@0 {
+ compatible = "ti,emif-4d5";
+ reg = <0 0x400>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <2>; /* DDR PHY type: Intelli PHY */
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
- emif2: emif@4d000000 {
- compatible = "ti,emif-4d5";
- ti,hwmods = "emif2";
- ti,no-idle-on-init;
- phy-type = <2>; /* DDR PHY type: Intelli PHY */
- reg = <0x4d000000 0x400>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- hw-caps-read-idle-ctrl;
- hw-caps-ll-interface;
- hw-caps-temp-alert;
+ target-module@4d000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4d000000 0x4>;
+ reg-names = "rev";
+ clocks = <&emif_clkctrl OMAP5_EMIF2_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4d000000 0x1000000>;
+
+ emif2: emif@0 {
+ compatible = "ti,emif-4d5";
+ reg = <0 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <2>; /* DDR PHY type: Intelli PHY */
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
aes1_target: target-module@4b501000 {
#thermal-sensor-cells = <1>;
};
- /* OCP2SCP3 */
- sata: sata@4a141100 {
- compatible = "snps,dwc-ahci";
- reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&sata_phy>;
- phy-names = "sata-phy";
- clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
- ti,hwmods = "sata";
- ports-implemented = <0x1>;
- };
-
target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5600fe00 0x4>,
#include <linux/clk/at91_pmc.h>
#include <linux/platform_data/atmel.h>
+#include <soc/at91/pm.h>
+
#include <asm/cacheflush.h>
#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include "generic.h"
#include "pm.h"
-/*
- * FIXME: this is needed to communicate between the pinctrl driver and
- * the PM implementation in the machine. Possibly part of the PM
- * implementation should be moved down into the pinctrl driver and get
- * called as part of the generic suspend/resume path.
- */
-#ifdef CONFIG_PINCTRL_AT91
-extern void at91_pinctrl_gpio_suspend(void);
-extern void at91_pinctrl_gpio_resume(void);
-#endif
-
struct at91_soc_pm {
int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
static int at91_pm_enter(suspend_state_t state)
{
#ifdef CONFIG_PINCTRL_AT91
+ /*
+ * FIXME: this is needed to communicate between the pinctrl driver and
+ * the PM implementation in the machine. Possibly part of the PM
+ * implementation should be moved down into the pinctrl driver and get
+ * called as part of the generic suspend/resume path.
+ */
at91_pinctrl_gpio_suspend();
#endif
#endif /* CONFIG_HOTPLUG_CPU */
/**
- * exynos_core_power_down : power down the specified cpu
- * @cpu : the cpu to power down
+ * exynos_cpu_power_down() - power down the specified cpu
+ * @cpu: the cpu to power down
*
* Power down the specified cpu. The sequence must be finished by a
* call to cpu_do_idle()
- *
*/
void exynos_cpu_power_down(int cpu)
{
}
/**
- * exynos_cpu_power_up : power up the specified cpu
- * @cpu : the cpu to power up
+ * exynos_cpu_power_up() - power up the specified cpu
+ * @cpu: the cpu to power up
*
* Power up the specified cpu
*/
}
/**
- * exynos_cpu_power_state : returns the power state of the cpu
- * @cpu : the cpu to retrieve the power state from
- *
+ * exynos_cpu_power_state() - returns the power state of the cpu
+ * @cpu: the cpu to retrieve the power state from
*/
int exynos_cpu_power_state(int cpu)
{
}
/**
- * exynos_cluster_power_down : power down the specified cluster
- * @cluster : the cluster to power down
+ * exynos_cluster_power_down() - power down the specified cluster
+ * @cluster: the cluster to power down
*/
void exynos_cluster_power_down(int cluster)
{
}
/**
- * exynos_cluster_power_up : power up the specified cluster
- * @cluster : the cluster to power up
+ * exynos_cluster_power_up() - power up the specified cluster
+ * @cluster: the cluster to power up
*/
void exynos_cluster_power_up(int cluster)
{
}
/**
- * exynos_cluster_power_state : returns the power state of the cluster
- * @cluster : the cluster to retrieve the power state from
+ * exynos_cluster_power_state() - returns the power state of the cluster
+ * @cluster: the cluster to retrieve the power state from
*
*/
int exynos_cluster_power_state(int cluster)
}
/**
- * exynos_scu_enable : enables SCU for Cortex-A9 based system
+ * exynos_scu_enable() - enables SCU for Cortex-A9 based system
*/
void exynos_scu_enable(void)
{
// SPDX-License-Identifier: GPL-2.0-only
/*
- * (Hisilicon's SoC based) flattened device tree enabled machine
+ * (HiSilicon's SoC based) flattened device tree enabled machine
*
- * Copyright (c) 2012-2013 Hisilicon Ltd.
+ * Copyright (c) 2012-2013 HiSilicon Ltd.
* Copyright (c) 2012-2013 Linaro Ltd.
*
* Author: Haojian Zhuang <haojian.zhuang@linaro.org>
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013 Linaro Ltd.
- * Copyright (c) 2013 Hisilicon Limited.
+ * Copyright (c) 2013 HiSilicon Limited.
*/
#include <linux/cpu.h>
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
*/
#include <linux/init.h>
#include <linux/smp.h>
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013 Linaro Ltd.
- * Copyright (c) 2013 Hisilicon Limited.
+ * Copyright (c) 2013 HiSilicon Limited.
* Based on arch/arm/mach-vexpress/platsmp.c, Copyright (C) 2002 ARM Ltd.
*/
#include <linux/smp.h>
select MXC_AVIC
select PINCTRL_IMX35
help
- This enables support for Freescale i.MX31 processor
+ This enables support for Freescale i.MX35 processor
endif
* This is also the lowest power state possible without affecting
* non-cpu parts of the system. For these reasons, imx5 should default
* to always using this state for cpu idling. The PM_SUSPEND_STANDBY also
- * uses this state and needs to take no action when registers remain confgiured
+ * uses this state and needs to take no action when registers remain configured
* for this state.
*/
#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
-/**
+/*
* OMAP1 Dual-Mode Timers - platform device registration
*
* Contains first level initialization routines which internally
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select OMAP_HWMOD
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PL310_ERRATA_588369 if CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181 if SMP
- select OMAP_HWMOD
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP
select HAVE_ARM_ARCH_TIMER
select IRQ_CROSSBAR
select ARM_ERRATA_798181 if SMP
- select OMAP_HWMOD
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(secure-common)
obj-$(CONFIG_SOC_AM33XX) += $(secure-common)
-obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_OMAP5) += $(secure-common)
obj-$(CONFIG_SOC_AM43XX) += $(secure-common)
-obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_DRA7XX) += $(secure-common)
ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),)
-obj-y += mcbsp.o
+obj-$(CONFIG_OMAP_HWMOD) += mcbsp.o
endif
obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
obj-$(CONFIG_SOC_TI81XX) += omap_hwmod_81xx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o
-obj-$(CONFIG_SOC_DRA7XX) += omap_hwmod_7xx_data.o
# OMAP2420 MSDI controller integration support ("MMC")
obj-$(CONFIG_SOC_OMAP2420) += msdi.o
}
#endif
-#ifdef CONFIG_SOC_DRA7XX
-extern int dra7xx_pciess_reset(struct omap_hwmod *oh);
-#else
-static inline int dra7xx_pciess_reset(struct omap_hwmod *oh)
-{
- return 0;
-}
-#endif
-
struct omap_system_dma_plat_info;
void pdata_quirks_init(const struct of_device_id *);
return v;
}
+#ifdef CONFIG_OMAP_HWMOD
static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
{
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
/* Set the default postsetup state for all hwmods */
omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
}
+#else
+static inline void omap_hwmod_init_postsetup(void)
+{
+}
+#endif
#ifdef CONFIG_SOC_OMAP2420
void __init omap2420_init_early(void)
omap44xx_voltagedomains_init();
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
- omap44xx_hwmod_init();
- omap_hwmod_init_postsetup();
omap_l2_cache_init();
omap_clk_soc_init = omap4xxx_dt_clk_init;
omap_secure_init();
omap54xx_voltagedomains_init();
omap54xx_powerdomains_init();
omap54xx_clockdomains_init();
- omap54xx_hwmod_init();
- omap_hwmod_init_postsetup();
omap_clk_soc_init = omap5xxx_dt_clk_init;
omap_secure_init();
}
dra7xxx_check_revision();
dra7xx_powerdomains_init();
dra7xx_clockdomains_init();
- dra7xx_hwmod_init();
- omap_hwmod_init_postsetup();
omap_clk_soc_init = dra7xx_dt_clk_init;
omap_secure_init();
}
if (res == 0) {
*found = fc;
*index = i;
+ of_node_put(np0);
return 0;
}
}
{ .match = "msdi", .len = 4, .reset = omap_msdi_reset, },
};
-static const struct omap_hwmod_reset dra7_reset_quirks[] = {
- { .match = "pcie", .len = 4, .reset = dra7xx_pciess_reset, },
-};
-
static const struct omap_hwmod_reset omap_reset_quirks[] = {
{ .match = "dss_core", .len = 8, .reset = omap_dss_reset, },
{ .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, },
omap24xx_reset_quirks,
ARRAY_SIZE(omap24xx_reset_quirks));
- if (soc_is_dra7xx())
- omap_hwmod_init_reset_quirk(dev, oh, data, dra7_reset_quirks,
- ARRAY_SIZE(dra7_reset_quirks));
-
omap_hwmod_init_reset_quirk(dev, oh, data, omap_reset_quirks,
ARRAY_SIZE(omap_reset_quirks));
}
struct omap_hwmod *parent_hwmod;
};
+#ifdef CONFIG_OMAP_HWMOD
+
struct device_node;
struct omap_hwmod *omap_hwmod_lookup(const char *name);
const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
+#else /* CONFIG_OMAP_HWMOD */
+
+static inline int
+omap_hwmod_for_each_by_class(const char *classname,
+ int (*fn)(struct omap_hwmod *oh, void *user),
+ void *user)
+{
+ return 0;
+}
+#endif /* CONFIG_OMAP_HWMOD */
+
/*
*
*/
extern int omap2430_hwmod_init(void);
extern int omap3xxx_hwmod_init(void);
extern int omap44xx_hwmod_init(void);
-extern int omap54xx_hwmod_init(void);
extern int am33xx_hwmod_init(void);
extern int dm814x_hwmod_init(void);
extern int dm816x_hwmod_init(void);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware modules present on the OMAP44xx chips
- *
- * Copyright (C) 2009-2012 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Benoit Cousson
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- * Note that this file is currently not in sync with autogeneration scripts.
- * The above note to be removed, once it is synced up.
- */
-
-#include <linux/io.h>
-
-#include "omap_hwmod.h"
-#include "omap_hwmod_common_data.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
-#include "prm44xx.h"
-#include "prm-regbits-44xx.h"
-
-/* Base offset for all OMAP4 interrupts external to MPUSS */
-#define OMAP44XX_IRQ_GIC_START 32
-
-/*
- * IP blocks
- */
-
-/*
- * 'dmm' class
- * instance(s): dmm
- */
-static struct omap_hwmod_class omap44xx_dmm_hwmod_class = {
- .name = "dmm",
-};
-
-/* dmm */
-static struct omap_hwmod omap44xx_dmm_hwmod = {
- .name = "dmm",
- .class = &omap44xx_dmm_hwmod_class,
- .clkdm_name = "l3_emif_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET,
- },
- },
-};
-
-/*
- * 'l3' class
- * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3
- */
-static struct omap_hwmod_class omap44xx_l3_hwmod_class = {
- .name = "l3",
-};
-
-/* l3_instr */
-static struct omap_hwmod omap44xx_l3_instr_hwmod = {
- .name = "l3_instr",
- .class = &omap44xx_l3_hwmod_class,
- .clkdm_name = "l3_instr_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/* l3_main_1 */
-static struct omap_hwmod omap44xx_l3_main_1_hwmod = {
- .name = "l3_main_1",
- .class = &omap44xx_l3_hwmod_class,
- .clkdm_name = "l3_1_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET,
- },
- },
-};
-
-/* l3_main_2 */
-static struct omap_hwmod omap44xx_l3_main_2_hwmod = {
- .name = "l3_main_2",
- .class = &omap44xx_l3_hwmod_class,
- .clkdm_name = "l3_2_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET,
- },
- },
-};
-
-/* l3_main_3 */
-static struct omap_hwmod omap44xx_l3_main_3_hwmod = {
- .name = "l3_main_3",
- .class = &omap44xx_l3_hwmod_class,
- .clkdm_name = "l3_instr_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/*
- * 'l4' class
- * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup
- */
-static struct omap_hwmod_class omap44xx_l4_hwmod_class = {
- .name = "l4",
-};
-
-/* l4_cfg */
-static struct omap_hwmod omap44xx_l4_cfg_hwmod = {
- .name = "l4_cfg",
- .class = &omap44xx_l4_hwmod_class,
- .clkdm_name = "l4_cfg_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
- },
- },
-};
-
-/* l4_per */
-static struct omap_hwmod omap44xx_l4_per_hwmod = {
- .name = "l4_per",
- .class = &omap44xx_l4_hwmod_class,
- .clkdm_name = "l4_per_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET,
- },
- },
-};
-
-/* l4_wkup */
-static struct omap_hwmod omap44xx_l4_wkup_hwmod = {
- .name = "l4_wkup",
- .class = &omap44xx_l4_hwmod_class,
- .clkdm_name = "l4_wkup_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET,
- },
- },
-};
-
-/*
- * 'mpu_bus' class
- * instance(s): mpu_private
- */
-static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = {
- .name = "mpu_bus",
-};
-
-/* mpu_private */
-static struct omap_hwmod omap44xx_mpu_private_hwmod = {
- .name = "mpu_private",
- .class = &omap44xx_mpu_bus_hwmod_class,
- .clkdm_name = "mpuss_clkdm",
- .prcm = {
- .omap4 = {
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/*
- * 'ocp_wp_noc' class
- * instance(s): ocp_wp_noc
- */
-static struct omap_hwmod_class omap44xx_ocp_wp_noc_hwmod_class = {
- .name = "ocp_wp_noc",
-};
-
-/* ocp_wp_noc */
-static struct omap_hwmod omap44xx_ocp_wp_noc_hwmod = {
- .name = "ocp_wp_noc",
- .class = &omap44xx_ocp_wp_noc_hwmod_class,
- .clkdm_name = "l3_instr_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L3INSTR_OCP_WP1_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/*
- * Modules omap_hwmod structures
- *
- * The following IPs are excluded for the moment because:
- * - They do not need an explicit SW control using omap_hwmod API.
- * - They still need to be validated with the driver
- * properly adapted to omap_hwmod / omap_device
- *
- * usim
- */
-
-/*
- * 'ctrl_module' class
- * attila core control module + core pad control module + wkup pad control
- * module + attila wkup control module
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_ctrl_module_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_ctrl_module_hwmod_class = {
- .name = "ctrl_module",
- .sysc = &omap44xx_ctrl_module_sysc,
-};
-
-/* ctrl_module_core */
-static struct omap_hwmod omap44xx_ctrl_module_core_hwmod = {
- .name = "ctrl_module_core",
- .class = &omap44xx_ctrl_module_hwmod_class,
- .clkdm_name = "l4_cfg_clkdm",
- .prcm = {
- .omap4 = {
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/* ctrl_module_pad_core */
-static struct omap_hwmod omap44xx_ctrl_module_pad_core_hwmod = {
- .name = "ctrl_module_pad_core",
- .class = &omap44xx_ctrl_module_hwmod_class,
- .clkdm_name = "l4_cfg_clkdm",
- .prcm = {
- .omap4 = {
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/* ctrl_module_wkup */
-static struct omap_hwmod omap44xx_ctrl_module_wkup_hwmod = {
- .name = "ctrl_module_wkup",
- .class = &omap44xx_ctrl_module_hwmod_class,
- .clkdm_name = "l4_wkup_clkdm",
- .prcm = {
- .omap4 = {
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/* ctrl_module_pad_wkup */
-static struct omap_hwmod omap44xx_ctrl_module_pad_wkup_hwmod = {
- .name = "ctrl_module_pad_wkup",
- .class = &omap44xx_ctrl_module_hwmod_class,
- .clkdm_name = "l4_wkup_clkdm",
- .prcm = {
- .omap4 = {
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/*
- * 'debugss' class
- * debug and emulation sub system
- */
-
-static struct omap_hwmod_class omap44xx_debugss_hwmod_class = {
- .name = "debugss",
-};
-
-/* debugss */
-static struct omap_hwmod omap44xx_debugss_hwmod = {
- .name = "debugss",
- .class = &omap44xx_debugss_hwmod_class,
- .clkdm_name = "emu_sys_clkdm",
- .main_clk = "trace_clk_div_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET,
- },
- },
-};
-
-/*
- * 'emif' class
- * external memory interface no1
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_emif_sysc = {
- .rev_offs = 0x0000,
-};
-
-static struct omap_hwmod_class omap44xx_emif_hwmod_class = {
- .name = "emif",
- .sysc = &omap44xx_emif_sysc,
-};
-
-/* emif1 */
-static struct omap_hwmod omap44xx_emif1_hwmod = {
- .name = "emif1",
- .class = &omap44xx_emif_hwmod_class,
- .clkdm_name = "l3_emif_clkdm",
- .flags = HWMOD_INIT_NO_IDLE,
- .main_clk = "ddrphy_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_MEMIF_EMIF_1_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_MEMIF_EMIF_1_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/* emif2 */
-static struct omap_hwmod omap44xx_emif2_hwmod = {
- .name = "emif2",
- .class = &omap44xx_emif_hwmod_class,
- .clkdm_name = "l3_emif_clkdm",
- .flags = HWMOD_INIT_NO_IDLE,
- .main_clk = "ddrphy_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_MEMIF_EMIF_2_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_MEMIF_EMIF_2_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/*
- * 'iss' class
- * external images sensor pixel data processor
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- /*
- * ISS needs 100 OCP clk cycles delay after a softreset before
- * accessing sysconfig again.
- * The lowest frequency at the moment for L3 bus is 100 MHz, so
- * 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
- *
- * TODO: Indicate errata when available.
- */
- .srst_udelay = 2,
- .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
- MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_iss_hwmod_class = {
- .name = "iss",
- .sysc = &omap44xx_iss_sysc,
-};
-
-/* iss */
-static struct omap_hwmod_opt_clk iss_opt_clks[] = {
- { .role = "ctrlclk", .clk = "iss_ctrlclk" },
-};
-
-static struct omap_hwmod omap44xx_iss_hwmod = {
- .name = "iss",
- .class = &omap44xx_iss_hwmod_class,
- .clkdm_name = "iss_clkdm",
- .main_clk = "ducati_clk_mux_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_CAM_ISS_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
- .opt_clks = iss_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(iss_opt_clks),
-};
-
-/*
- * 'mpu' class
- * mpu sub-system
- */
-
-static struct omap_hwmod_class omap44xx_mpu_hwmod_class = {
- .name = "mpu",
-};
-
-/* mpu */
-static struct omap_hwmod omap44xx_mpu_hwmod = {
- .name = "mpu",
- .class = &omap44xx_mpu_hwmod_class,
- .clkdm_name = "mpuss_clkdm",
- .flags = HWMOD_INIT_NO_IDLE,
- .main_clk = "dpll_mpu_m2_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_MPU_MPU_CONTEXT_OFFSET,
- },
- },
-};
-
-/*
- * 'ocmc_ram' class
- * top-level core on-chip ram
- */
-
-static struct omap_hwmod_class omap44xx_ocmc_ram_hwmod_class = {
- .name = "ocmc_ram",
-};
-
-/* ocmc_ram */
-static struct omap_hwmod omap44xx_ocmc_ram_hwmod = {
- .name = "ocmc_ram",
- .class = &omap44xx_ocmc_ram_hwmod_class,
- .clkdm_name = "l3_2_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L3_2_OCMC_RAM_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L3_2_OCMC_RAM_CONTEXT_OFFSET,
- },
- },
-};
-
-
-/*
- * 'prcm' class
- * power and reset manager (part of the prcm infrastructure) + clock manager 2
- * + clock manager 1 (in always on power domain) + local prm in mpu
- */
-
-static struct omap_hwmod_class omap44xx_prcm_hwmod_class = {
- .name = "prcm",
-};
-
-/* prcm_mpu */
-static struct omap_hwmod omap44xx_prcm_mpu_hwmod = {
- .name = "prcm_mpu",
- .class = &omap44xx_prcm_hwmod_class,
- .clkdm_name = "l4_wkup_clkdm",
- .flags = HWMOD_NO_IDLEST,
- .prcm = {
- .omap4 = {
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/* cm_core_aon */
-static struct omap_hwmod omap44xx_cm_core_aon_hwmod = {
- .name = "cm_core_aon",
- .class = &omap44xx_prcm_hwmod_class,
- .flags = HWMOD_NO_IDLEST,
- .prcm = {
- .omap4 = {
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/* cm_core */
-static struct omap_hwmod omap44xx_cm_core_hwmod = {
- .name = "cm_core",
- .class = &omap44xx_prcm_hwmod_class,
- .flags = HWMOD_NO_IDLEST,
- .prcm = {
- .omap4 = {
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/* prm */
-static struct omap_hwmod_rst_info omap44xx_prm_resets[] = {
- { .name = "rst_global_warm_sw", .rst_shift = 0 },
- { .name = "rst_global_cold_sw", .rst_shift = 1 },
-};
-
-static struct omap_hwmod omap44xx_prm_hwmod = {
- .name = "prm",
- .class = &omap44xx_prcm_hwmod_class,
- .rst_lines = omap44xx_prm_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap44xx_prm_resets),
-};
-
-/*
- * 'scrm' class
- * system clock and reset manager
- */
-
-static struct omap_hwmod_class omap44xx_scrm_hwmod_class = {
- .name = "scrm",
-};
-
-/* scrm */
-static struct omap_hwmod omap44xx_scrm_hwmod = {
- .name = "scrm",
- .class = &omap44xx_scrm_hwmod_class,
- .clkdm_name = "l4_wkup_clkdm",
- .prcm = {
- .omap4 = {
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/*
- * 'sl2if' class
- * shared level 2 memory interface
- */
-
-static struct omap_hwmod_class omap44xx_sl2if_hwmod_class = {
- .name = "sl2if",
-};
-
-/* sl2if */
-static struct omap_hwmod omap44xx_sl2if_hwmod = {
- .name = "sl2if",
- .class = &omap44xx_sl2if_hwmod_class,
- .clkdm_name = "ivahd_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_IVAHD_SL2_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_IVAHD_SL2_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/*
- * interfaces
- */
-
-/* l3_main_1 -> dmm */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = {
- .master = &omap44xx_l3_main_1_hwmod,
- .slave = &omap44xx_dmm_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_SDMA,
-};
-
-/* mpu -> dmm */
-static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = {
- .master = &omap44xx_mpu_hwmod,
- .slave = &omap44xx_dmm_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU,
-};
-
-/* l3_main_3 -> l3_instr */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = {
- .master = &omap44xx_l3_main_3_hwmod,
- .slave = &omap44xx_l3_instr_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* ocp_wp_noc -> l3_instr */
-static struct omap_hwmod_ocp_if omap44xx_ocp_wp_noc__l3_instr = {
- .master = &omap44xx_ocp_wp_noc_hwmod,
- .slave = &omap44xx_l3_instr_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_l3_main_1_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_l3_main_1_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = {
- .master = &omap44xx_mpu_hwmod,
- .slave = &omap44xx_l3_main_1_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU,
-};
-
-/* debugss -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_debugss__l3_main_2 = {
- .master = &omap44xx_debugss_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "dbgclk_mux_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* iss -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = {
- .master = &omap44xx_iss_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = {
- .master = &omap44xx_l3_main_1_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU,
-};
-
-/* l4_cfg -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = {
- .master = &omap44xx_l3_main_1_hwmod,
- .slave = &omap44xx_l3_main_3_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU,
-};
-
-/* l3_main_2 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_l3_main_3_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_l3_main_3_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_cfg */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = {
- .master = &omap44xx_l3_main_1_hwmod,
- .slave = &omap44xx_l4_cfg_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l4_per */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_l4_per_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l4_wkup */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_l4_wkup_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> mpu_private */
-static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = {
- .master = &omap44xx_mpu_hwmod,
- .slave = &omap44xx_mpu_private_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> ocp_wp_noc */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp_wp_noc = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_ocp_wp_noc_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> ctrl_module_core */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ctrl_module_core = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_ctrl_module_core_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> ctrl_module_pad_core */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ctrl_module_pad_core = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_ctrl_module_pad_core_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> ctrl_module_wkup */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__ctrl_module_wkup = {
- .master = &omap44xx_l4_wkup_hwmod,
- .slave = &omap44xx_ctrl_module_wkup_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> ctrl_module_pad_wkup */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__ctrl_module_pad_wkup = {
- .master = &omap44xx_l4_wkup_hwmod,
- .slave = &omap44xx_ctrl_module_pad_wkup_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_instr -> debugss */
-static struct omap_hwmod_ocp_if omap44xx_l3_instr__debugss = {
- .master = &omap44xx_l3_instr_hwmod,
- .slave = &omap44xx_debugss_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> iss */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_iss_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> ocmc_ram */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_ocmc_ram_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu_private -> prcm_mpu */
-static struct omap_hwmod_ocp_if omap44xx_mpu_private__prcm_mpu = {
- .master = &omap44xx_mpu_private_hwmod,
- .slave = &omap44xx_prcm_mpu_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> cm_core_aon */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__cm_core_aon = {
- .master = &omap44xx_l4_wkup_hwmod,
- .slave = &omap44xx_cm_core_aon_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> cm_core */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__cm_core = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_cm_core_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> prm */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__prm = {
- .master = &omap44xx_l4_wkup_hwmod,
- .slave = &omap44xx_prm_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> scrm */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = {
- .master = &omap44xx_l4_wkup_hwmod,
- .slave = &omap44xx_scrm_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> sl2if */
-static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_sl2if_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> emif1 */
-static struct omap_hwmod_ocp_if omap44xx_mpu__emif1 = {
- .master = &omap44xx_mpu_hwmod,
- .slave = &omap44xx_emif1_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> emif2 */
-static struct omap_hwmod_ocp_if omap44xx_mpu__emif2 = {
- .master = &omap44xx_mpu_hwmod,
- .slave = &omap44xx_emif2_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
- &omap44xx_l3_main_1__dmm,
- &omap44xx_mpu__dmm,
- &omap44xx_l3_main_3__l3_instr,
- &omap44xx_ocp_wp_noc__l3_instr,
- &omap44xx_l3_main_2__l3_main_1,
- &omap44xx_l4_cfg__l3_main_1,
- &omap44xx_mpu__l3_main_1,
- &omap44xx_debugss__l3_main_2,
- &omap44xx_iss__l3_main_2,
- &omap44xx_l3_main_1__l3_main_2,
- &omap44xx_l4_cfg__l3_main_2,
- &omap44xx_l3_main_1__l3_main_3,
- &omap44xx_l3_main_2__l3_main_3,
- &omap44xx_l4_cfg__l3_main_3,
- &omap44xx_l3_main_1__l4_cfg,
- &omap44xx_l3_main_2__l4_per,
- &omap44xx_l4_cfg__l4_wkup,
- &omap44xx_mpu__mpu_private,
- &omap44xx_l4_cfg__ocp_wp_noc,
- &omap44xx_l4_cfg__ctrl_module_core,
- &omap44xx_l4_cfg__ctrl_module_pad_core,
- &omap44xx_l4_wkup__ctrl_module_wkup,
- &omap44xx_l4_wkup__ctrl_module_pad_wkup,
- &omap44xx_l3_instr__debugss,
- &omap44xx_l3_main_2__iss,
- &omap44xx_l3_main_2__ocmc_ram,
- &omap44xx_mpu_private__prcm_mpu,
- &omap44xx_l4_wkup__cm_core_aon,
- &omap44xx_l4_cfg__cm_core,
- &omap44xx_l4_wkup__prm,
- &omap44xx_l4_wkup__scrm,
- /* &omap44xx_l3_main_2__sl2if, */
- &omap44xx_mpu__emif1,
- &omap44xx_mpu__emif2,
- NULL,
-};
-
-int __init omap44xx_hwmod_init(void)
-{
- omap_hwmod_init();
- return omap_hwmod_register_links(omap44xx_hwmod_ocp_ifs);
-}
-
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware modules present on the OMAP54xx chips
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
- *
- * Paul Walmsley
- * Benoit Cousson
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- */
-
-#include <linux/io.h>
-#include <linux/power/smartreflex.h>
-
-#include "omap_hwmod.h"
-#include "omap_hwmod_common_data.h"
-#include "cm1_54xx.h"
-#include "cm2_54xx.h"
-#include "prm54xx.h"
-
-/* Base offset for all OMAP5 interrupts external to MPUSS */
-#define OMAP54XX_IRQ_GIC_START 32
-
-/*
- * IP blocks
- */
-
-/*
- * 'dmm' class
- * instance(s): dmm
- */
-static struct omap_hwmod_class omap54xx_dmm_hwmod_class = {
- .name = "dmm",
-};
-
-/* dmm */
-static struct omap_hwmod omap54xx_dmm_hwmod = {
- .name = "dmm",
- .class = &omap54xx_dmm_hwmod_class,
- .clkdm_name = "emif_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_EMIF_DMM_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_EMIF_DMM_CONTEXT_OFFSET,
- },
- },
-};
-
-/*
- * 'l3' class
- * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3
- */
-static struct omap_hwmod_class omap54xx_l3_hwmod_class = {
- .name = "l3",
-};
-
-/* l3_instr */
-static struct omap_hwmod omap54xx_l3_instr_hwmod = {
- .name = "l3_instr",
- .class = &omap54xx_l3_hwmod_class,
- .clkdm_name = "l3instr_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/* l3_main_1 */
-static struct omap_hwmod omap54xx_l3_main_1_hwmod = {
- .name = "l3_main_1",
- .class = &omap54xx_l3_hwmod_class,
- .clkdm_name = "l3main1_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET,
- },
- },
-};
-
-/* l3_main_2 */
-static struct omap_hwmod omap54xx_l3_main_2_hwmod = {
- .name = "l3_main_2",
- .class = &omap54xx_l3_hwmod_class,
- .clkdm_name = "l3main2_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L3MAIN2_L3_MAIN_2_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L3MAIN2_L3_MAIN_2_CONTEXT_OFFSET,
- },
- },
-};
-
-/* l3_main_3 */
-static struct omap_hwmod omap54xx_l3_main_3_hwmod = {
- .name = "l3_main_3",
- .class = &omap54xx_l3_hwmod_class,
- .clkdm_name = "l3instr_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L3INSTR_L3_MAIN_3_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L3INSTR_L3_MAIN_3_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/*
- * 'l4' class
- * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup
- */
-static struct omap_hwmod_class omap54xx_l4_hwmod_class = {
- .name = "l4",
-};
-
-/* l4_cfg */
-static struct omap_hwmod omap54xx_l4_cfg_hwmod = {
- .name = "l4_cfg",
- .class = &omap54xx_l4_hwmod_class,
- .clkdm_name = "l4cfg_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
- },
- },
-};
-
-/* l4_per */
-static struct omap_hwmod omap54xx_l4_per_hwmod = {
- .name = "l4_per",
- .class = &omap54xx_l4_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L4PER_L4_PER_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L4PER_L4_PER_CONTEXT_OFFSET,
- },
- },
-};
-
-/* l4_wkup */
-static struct omap_hwmod omap54xx_l4_wkup_hwmod = {
- .name = "l4_wkup",
- .class = &omap54xx_l4_hwmod_class,
- .clkdm_name = "wkupaon_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET,
- },
- },
-};
-
-/*
- * 'mpu_bus' class
- * instance(s): mpu_private
- */
-static struct omap_hwmod_class omap54xx_mpu_bus_hwmod_class = {
- .name = "mpu_bus",
-};
-
-/* mpu_private */
-static struct omap_hwmod omap54xx_mpu_private_hwmod = {
- .name = "mpu_private",
- .class = &omap54xx_mpu_bus_hwmod_class,
- .clkdm_name = "mpu_clkdm",
- .prcm = {
- .omap4 = {
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/*
- * 'emif' class
- * external memory interface no1 (wrapper)
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_emif_sysc = {
- .rev_offs = 0x0000,
-};
-
-static struct omap_hwmod_class omap54xx_emif_hwmod_class = {
- .name = "emif",
- .sysc = &omap54xx_emif_sysc,
-};
-
-/* emif1 */
-static struct omap_hwmod omap54xx_emif1_hwmod = {
- .name = "emif1",
- .class = &omap54xx_emif_hwmod_class,
- .clkdm_name = "emif_clkdm",
- .flags = HWMOD_INIT_NO_IDLE,
- .main_clk = "dpll_core_h11x2_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_EMIF_EMIF1_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_EMIF_EMIF1_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/* emif2 */
-static struct omap_hwmod omap54xx_emif2_hwmod = {
- .name = "emif2",
- .class = &omap54xx_emif_hwmod_class,
- .clkdm_name = "emif_clkdm",
- .flags = HWMOD_INIT_NO_IDLE,
- .main_clk = "dpll_core_h11x2_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_EMIF_EMIF2_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_EMIF_EMIF2_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-
-
-
-/*
- * 'mpu' class
- * mpu sub-system
- */
-
-static struct omap_hwmod_class omap54xx_mpu_hwmod_class = {
- .name = "mpu",
-};
-
-/* mpu */
-static struct omap_hwmod omap54xx_mpu_hwmod = {
- .name = "mpu",
- .class = &omap54xx_mpu_hwmod_class,
- .clkdm_name = "mpu_clkdm",
- .flags = HWMOD_INIT_NO_IDLE,
- .main_clk = "dpll_mpu_m2_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_MPU_MPU_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_MPU_MPU_CONTEXT_OFFSET,
- },
- },
-};
-
-/*
- * 'sata' class
- * sata: serial ata interface gen2 compliant ( 1 rx/ 1 tx)
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_sata_sysc = {
- .rev_offs = 0x00fc,
- .sysc_offs = 0x0000,
- .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
- MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_sata_hwmod_class = {
- .name = "sata",
- .sysc = &omap54xx_sata_sysc,
-};
-
-/* sata */
-static struct omap_hwmod omap54xx_sata_hwmod = {
- .name = "sata",
- .class = &omap54xx_sata_hwmod_class,
- .clkdm_name = "l3init_clkdm",
- .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
- .main_clk = "func_48m_fclk",
- .mpu_rt_idx = 1,
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP54XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
- .context_offs = OMAP54XX_RM_L3INIT_SATA_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* l4_cfg -> sata */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__sata = {
- .master = &omap54xx_l4_cfg_hwmod,
- .slave = &omap54xx_sata_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/*
- * Interfaces
- */
-
-/* l3_main_1 -> dmm */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__dmm = {
- .master = &omap54xx_l3_main_1_hwmod,
- .slave = &omap54xx_dmm_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_SDMA,
-};
-
-/* l3_main_3 -> l3_instr */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_3__l3_instr = {
- .master = &omap54xx_l3_main_3_hwmod,
- .slave = &omap54xx_l3_instr_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_1 = {
- .master = &omap54xx_l3_main_2_hwmod,
- .slave = &omap54xx_l3_main_1_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_1 = {
- .master = &omap54xx_l4_cfg_hwmod,
- .slave = &omap54xx_l3_main_1_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap54xx_mpu__l3_main_1 = {
- .master = &omap54xx_mpu_hwmod,
- .slave = &omap54xx_l3_main_1_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU,
-};
-
-/* l3_main_1 -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_2 = {
- .master = &omap54xx_l3_main_1_hwmod,
- .slave = &omap54xx_l3_main_2_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU,
-};
-
-/* l4_cfg -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_2 = {
- .master = &omap54xx_l4_cfg_hwmod,
- .slave = &omap54xx_l3_main_2_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_3 = {
- .master = &omap54xx_l3_main_1_hwmod,
- .slave = &omap54xx_l3_main_3_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU,
-};
-
-/* l3_main_2 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_3 = {
- .master = &omap54xx_l3_main_2_hwmod,
- .slave = &omap54xx_l3_main_3_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_3 = {
- .master = &omap54xx_l4_cfg_hwmod,
- .slave = &omap54xx_l3_main_3_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_cfg */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_cfg = {
- .master = &omap54xx_l3_main_1_hwmod,
- .slave = &omap54xx_l4_cfg_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l4_per */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l4_per = {
- .master = &omap54xx_l3_main_2_hwmod,
- .slave = &omap54xx_l4_per_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_wkup */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_wkup = {
- .master = &omap54xx_l3_main_1_hwmod,
- .slave = &omap54xx_l4_wkup_hwmod,
- .clk = "wkupaon_iclk_mux",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> mpu_private */
-static struct omap_hwmod_ocp_if omap54xx_mpu__mpu_private = {
- .master = &omap54xx_mpu_hwmod,
- .slave = &omap54xx_mpu_private_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> emif1 */
-static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = {
- .master = &omap54xx_mpu_hwmod,
- .slave = &omap54xx_emif1_hwmod,
- .clk = "dpll_core_h11x2_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> emif2 */
-static struct omap_hwmod_ocp_if omap54xx_mpu__emif2 = {
- .master = &omap54xx_mpu_hwmod,
- .slave = &omap54xx_emif2_hwmod,
- .clk = "dpll_core_h11x2_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> mpu */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
- .master = &omap54xx_l4_cfg_hwmod,
- .slave = &omap54xx_mpu_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
- &omap54xx_l3_main_1__dmm,
- &omap54xx_l3_main_3__l3_instr,
- &omap54xx_l3_main_2__l3_main_1,
- &omap54xx_l4_cfg__l3_main_1,
- &omap54xx_mpu__l3_main_1,
- &omap54xx_l3_main_1__l3_main_2,
- &omap54xx_l4_cfg__l3_main_2,
- &omap54xx_l3_main_1__l3_main_3,
- &omap54xx_l3_main_2__l3_main_3,
- &omap54xx_l4_cfg__l3_main_3,
- &omap54xx_l3_main_1__l4_cfg,
- &omap54xx_l3_main_2__l4_per,
- &omap54xx_l3_main_1__l4_wkup,
- &omap54xx_mpu__mpu_private,
- &omap54xx_mpu__emif1,
- &omap54xx_mpu__emif2,
- &omap54xx_l4_cfg__mpu,
- &omap54xx_l4_cfg__sata,
- NULL,
-};
-
-int __init omap54xx_hwmod_init(void)
-{
- omap_hwmod_init();
- return omap_hwmod_register_links(omap54xx_hwmod_ocp_ifs);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware modules present on the DRA7xx chips
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
- *
- * Paul Walmsley
- * Benoit Cousson
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- */
-
-#include <linux/io.h>
-
-#include "omap_hwmod.h"
-#include "omap_hwmod_common_data.h"
-#include "cm1_7xx.h"
-#include "cm2_7xx.h"
-#include "prm7xx.h"
-#include "soc.h"
-
-/* Base offset for all DRA7XX interrupts external to MPUSS */
-#define DRA7XX_IRQ_GIC_START 32
-
-/*
- * IP blocks
- */
-
-/*
- * 'dmm' class
- * instance(s): dmm
- */
-static struct omap_hwmod_class dra7xx_dmm_hwmod_class = {
- .name = "dmm",
-};
-
-/* dmm */
-static struct omap_hwmod dra7xx_dmm_hwmod = {
- .name = "dmm",
- .class = &dra7xx_dmm_hwmod_class,
- .clkdm_name = "emif_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_EMIF_DMM_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_EMIF_DMM_CONTEXT_OFFSET,
- },
- },
-};
-
-/*
- * 'l3' class
- * instance(s): l3_instr, l3_main_1, l3_main_2
- */
-static struct omap_hwmod_class dra7xx_l3_hwmod_class = {
- .name = "l3",
-};
-
-/* l3_instr */
-static struct omap_hwmod dra7xx_l3_instr_hwmod = {
- .name = "l3_instr",
- .class = &dra7xx_l3_hwmod_class,
- .clkdm_name = "l3instr_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/* l3_main_1 */
-static struct omap_hwmod dra7xx_l3_main_1_hwmod = {
- .name = "l3_main_1",
- .class = &dra7xx_l3_hwmod_class,
- .clkdm_name = "l3main1_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET,
- },
- },
-};
-
-/* l3_main_2 */
-static struct omap_hwmod dra7xx_l3_main_2_hwmod = {
- .name = "l3_main_2",
- .class = &dra7xx_l3_hwmod_class,
- .clkdm_name = "l3instr_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L3INSTR_L3_MAIN_2_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L3INSTR_L3_MAIN_2_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-/*
- * 'l4' class
- * instance(s): l4_cfg, l4_per1, l4_per2, l4_per3, l4_wkup
- */
-static struct omap_hwmod_class dra7xx_l4_hwmod_class = {
- .name = "l4",
-};
-
-/* l4_cfg */
-static struct omap_hwmod dra7xx_l4_cfg_hwmod = {
- .name = "l4_cfg",
- .class = &dra7xx_l4_hwmod_class,
- .clkdm_name = "l4cfg_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
- },
- },
-};
-
-/* l4_per1 */
-static struct omap_hwmod dra7xx_l4_per1_hwmod = {
- .name = "l4_per1",
- .class = &dra7xx_l4_hwmod_class,
- .clkdm_name = "l4per_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER_L4_PER1_CLKCTRL_OFFSET,
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/* l4_per2 */
-static struct omap_hwmod dra7xx_l4_per2_hwmod = {
- .name = "l4_per2",
- .class = &dra7xx_l4_hwmod_class,
- .clkdm_name = "l4per2_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER2_L4_PER2_CLKCTRL_OFFSET,
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/* l4_per3 */
-static struct omap_hwmod dra7xx_l4_per3_hwmod = {
- .name = "l4_per3",
- .class = &dra7xx_l4_hwmod_class,
- .clkdm_name = "l4per3_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER3_L4_PER3_CLKCTRL_OFFSET,
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/* l4_wkup */
-static struct omap_hwmod dra7xx_l4_wkup_hwmod = {
- .name = "l4_wkup",
- .class = &dra7xx_l4_hwmod_class,
- .clkdm_name = "wkupaon_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET,
- },
- },
-};
-
-/*
- * 'atl' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_atl_hwmod_class = {
- .name = "atl",
-};
-
-/* atl */
-static struct omap_hwmod dra7xx_atl_hwmod = {
- .name = "atl",
- .class = &dra7xx_atl_hwmod_class,
- .clkdm_name = "atl_clkdm",
- .main_clk = "atl_gfclk_mux",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_ATL_ATL_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_ATL_ATL_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
- * 'bb2d' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_bb2d_hwmod_class = {
- .name = "bb2d",
-};
-
-/* bb2d */
-static struct omap_hwmod dra7xx_bb2d_hwmod = {
- .name = "bb2d",
- .class = &dra7xx_bb2d_hwmod_class,
- .clkdm_name = "dss_clkdm",
- .main_clk = "dpll_core_h24x2_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_DSS_BB2D_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_DSS_BB2D_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
- * 'ctrl_module' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_ctrl_module_hwmod_class = {
- .name = "ctrl_module",
-};
-
-/* ctrl_module_wkup */
-static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = {
- .name = "ctrl_module_wkup",
- .class = &dra7xx_ctrl_module_hwmod_class,
- .clkdm_name = "wkupaon_clkdm",
- .prcm = {
- .omap4 = {
- .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
- },
- },
-};
-
-/*
- * 'mpu' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_mpu_hwmod_class = {
- .name = "mpu",
-};
-
-/* mpu */
-static struct omap_hwmod dra7xx_mpu_hwmod = {
- .name = "mpu",
- .class = &dra7xx_mpu_hwmod_class,
- .clkdm_name = "mpu_clkdm",
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
- .main_clk = "dpll_mpu_m2_ck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_MPU_MPU_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_MPU_MPU_CONTEXT_OFFSET,
- },
- },
-};
-
-
-/*
- * 'PCIE' class
- *
- */
-
-/*
- * As noted in documentation for _reset() in omap_hwmod.c, the stock reset
- * functionality of OMAP HWMOD layer does not deassert the hardreset lines
- * associated with an IP automatically leaving the driver to handle that
- * by itself. This does not work for PCIeSS which needs the reset lines
- * deasserted for the driver to start accessing registers.
- *
- * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset
- * lines after asserting them.
- */
-int dra7xx_pciess_reset(struct omap_hwmod *oh)
-{
- int i;
-
- for (i = 0; i < oh->rst_lines_cnt; i++) {
- omap_hwmod_assert_hardreset(oh, oh->rst_lines[i].name);
- omap_hwmod_deassert_hardreset(oh, oh->rst_lines[i].name);
- }
-
- return 0;
-}
-
-static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
- .name = "pcie",
- .reset = dra7xx_pciess_reset,
-};
-
-/* pcie1 */
-static struct omap_hwmod_rst_info dra7xx_pciess1_resets[] = {
- { .name = "pcie", .rst_shift = 0 },
-};
-
-static struct omap_hwmod dra7xx_pciess1_hwmod = {
- .name = "pcie1",
- .class = &dra7xx_pciess_hwmod_class,
- .clkdm_name = "pcie_clkdm",
- .rst_lines = dra7xx_pciess1_resets,
- .rst_lines_cnt = ARRAY_SIZE(dra7xx_pciess1_resets),
- .main_clk = "l4_root_clk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
- .rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/* pcie2 */
-static struct omap_hwmod_rst_info dra7xx_pciess2_resets[] = {
- { .name = "pcie", .rst_shift = 1 },
-};
-
-/* pcie2 */
-static struct omap_hwmod dra7xx_pciess2_hwmod = {
- .name = "pcie2",
- .class = &dra7xx_pciess_hwmod_class,
- .clkdm_name = "pcie_clkdm",
- .rst_lines = dra7xx_pciess2_resets,
- .rst_lines_cnt = ARRAY_SIZE(dra7xx_pciess2_resets),
- .main_clk = "l4_root_clk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET,
- .rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
- * 'qspi' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_qspi_sysc = {
- .rev_offs = 0,
- .sysc_offs = 0x0010,
- .sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class dra7xx_qspi_hwmod_class = {
- .name = "qspi",
- .sysc = &dra7xx_qspi_sysc,
-};
-
-/* qspi */
-static struct omap_hwmod dra7xx_qspi_hwmod = {
- .name = "qspi",
- .class = &dra7xx_qspi_hwmod_class,
- .clkdm_name = "l4per2_clkdm",
- .main_clk = "qspi_gfclk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L4PER2_QSPI_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L4PER2_QSPI_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
- * 'sata' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_sata_sysc = {
- .rev_offs = 0x00fc,
- .sysc_offs = 0x0000,
- .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
- MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class dra7xx_sata_hwmod_class = {
- .name = "sata",
- .sysc = &dra7xx_sata_sysc,
-};
-
-/* sata */
-
-static struct omap_hwmod dra7xx_sata_hwmod = {
- .name = "sata",
- .class = &dra7xx_sata_hwmod_class,
- .clkdm_name = "l3init_clkdm",
- .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
- .main_clk = "func_48m_fclk",
- .mpu_rt_idx = 1,
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L3INIT_SATA_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
-};
-
-/*
- * 'vcp' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_vcp_hwmod_class = {
- .name = "vcp",
-};
-
-/* vcp1 */
-static struct omap_hwmod dra7xx_vcp1_hwmod = {
- .name = "vcp1",
- .class = &dra7xx_vcp_hwmod_class,
- .clkdm_name = "l3main1_clkdm",
- .main_clk = "l3_iclk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP1_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L3MAIN1_VCP1_CONTEXT_OFFSET,
- },
- },
-};
-
-/* vcp2 */
-static struct omap_hwmod dra7xx_vcp2_hwmod = {
- .name = "vcp2",
- .class = &dra7xx_vcp_hwmod_class,
- .clkdm_name = "l3main1_clkdm",
- .main_clk = "l3_iclk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP2_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L3MAIN1_VCP2_CONTEXT_OFFSET,
- },
- },
-};
-
-
-
-/*
- * Interfaces
- */
-
-/* l3_main_1 -> dmm */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dmm = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_dmm_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l3_instr */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_2__l3_instr = {
- .master = &dra7xx_l3_main_2_hwmod,
- .slave = &dra7xx_l3_instr_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_1 = {
- .master = &dra7xx_l4_cfg_hwmod,
- .slave = &dra7xx_l3_main_1_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> l3_main_1 */
-static struct omap_hwmod_ocp_if dra7xx_mpu__l3_main_1 = {
- .master = &dra7xx_mpu_hwmod,
- .slave = &dra7xx_l3_main_1_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU,
-};
-
-/* l3_main_1 -> l3_main_2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l3_main_2 = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_l3_main_2_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU,
-};
-
-/* l4_cfg -> l3_main_2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_2 = {
- .master = &dra7xx_l4_cfg_hwmod,
- .slave = &dra7xx_l3_main_2_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_cfg */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_cfg = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_l4_cfg_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_per1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per1 = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_l4_per1_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_per2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per2 = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_l4_per2_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_per3 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per3 = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_l4_per3_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_wkup */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_wkup = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_l4_wkup_hwmod,
- .clk = "wkupaon_iclk_mux",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> atl */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__atl = {
- .master = &dra7xx_l4_per2_hwmod,
- .slave = &dra7xx_atl_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> bb2d */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__bb2d = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_bb2d_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> ctrl_module_wkup */
-static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
- .master = &dra7xx_l4_wkup_hwmod,
- .slave = &dra7xx_ctrl_module_wkup_hwmod,
- .clk = "wkupaon_iclk_mux",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> mpu */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
- .master = &dra7xx_l4_cfg_hwmod,
- .slave = &dra7xx_mpu_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> pciess1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_pciess1_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> pciess1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = {
- .master = &dra7xx_l4_cfg_hwmod,
- .slave = &dra7xx_pciess1_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> pciess2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_pciess2_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> pciess2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = {
- .master = &dra7xx_l4_cfg_hwmod,
- .slave = &dra7xx_pciess2_hwmod,
- .clk = "l4_root_clk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> qspi */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_qspi_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> sata */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = {
- .master = &dra7xx_l4_cfg_hwmod,
- .slave = &dra7xx_sata_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> vcp1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_vcp1_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> vcp1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp1 = {
- .master = &dra7xx_l4_per2_hwmod,
- .slave = &dra7xx_vcp1_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> vcp2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp2 = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_vcp2_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> vcp2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp2 = {
- .master = &dra7xx_l4_per2_hwmod,
- .slave = &dra7xx_vcp2_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
- &dra7xx_l3_main_1__dmm,
- &dra7xx_l3_main_2__l3_instr,
- &dra7xx_l4_cfg__l3_main_1,
- &dra7xx_mpu__l3_main_1,
- &dra7xx_l3_main_1__l3_main_2,
- &dra7xx_l4_cfg__l3_main_2,
- &dra7xx_l3_main_1__l4_cfg,
- &dra7xx_l3_main_1__l4_per1,
- &dra7xx_l3_main_1__l4_per2,
- &dra7xx_l3_main_1__l4_per3,
- &dra7xx_l3_main_1__l4_wkup,
- &dra7xx_l4_per2__atl,
- &dra7xx_l3_main_1__bb2d,
- &dra7xx_l4_wkup__ctrl_module_wkup,
- &dra7xx_l4_cfg__mpu,
- &dra7xx_l3_main_1__pciess1,
- &dra7xx_l4_cfg__pciess1,
- &dra7xx_l3_main_1__pciess2,
- &dra7xx_l4_cfg__pciess2,
- &dra7xx_l3_main_1__qspi,
- &dra7xx_l4_cfg__sata,
- &dra7xx_l3_main_1__vcp1,
- &dra7xx_l4_per2__vcp1,
- &dra7xx_l3_main_1__vcp2,
- &dra7xx_l4_per2__vcp2,
- NULL,
-};
-
-/* SoC variant specific hwmod links */
-static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = {
- NULL,
-};
-
-static struct omap_hwmod_ocp_if *rtc_hwmod_ocp_ifs[] __initdata = {
- NULL,
-};
-
-int __init dra7xx_hwmod_init(void)
-{
- int ret;
-
- omap_hwmod_init();
- ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
-
- if (!ret && soc_is_dra74x()) {
- ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
- } else if (!ret && soc_is_dra72x()) {
- ret = omap_hwmod_register_links(dra72x_hwmod_ocp_ifs);
- if (!ret && !of_machine_is_compatible("ti,dra718"))
- ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
- } else if (!ret && soc_is_dra76x()) {
- if (!ret && soc_is_dra76x_abz())
- ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
- }
-
- return ret;
-}
// SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
* OMAP and TWL PMIC specific initializations.
*
* Copyright (C) 2010 Texas Instruments Incorporated.
dev->platform_data = &twl_gpio_auxdata;
}
-#if IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP)
+#if defined(CONFIG_ARCH_OMAP3) && IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP)
static struct omap_mcbsp_platform_data mcbsp_pdata;
static void __init omap3_mcbsp_init(void)
{
}
}
-void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
+static const char * const pdata_quirks_init_nodes[] = {
+ "prcm",
+ "prm",
+};
+
+void __init
+pdata_quirks_init_clocks(const struct of_device_id *omap_dt_match_table)
{
struct device_node *np;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pdata_quirks_init_nodes); i++) {
+ np = of_find_node_by_name(NULL, pdata_quirks_init_nodes[i]);
+ if (!np)
+ continue;
+
+ of_platform_populate(np, omap_dt_match_table,
+ omap_auxdata_lookup, NULL);
+ }
+}
+void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
+{
/*
* We still need this for omap2420 and omap3 PM to work, others are
* using drivers/misc/sram.c already.
omap3_mcbsp_init();
pdata_quirks_check(auxdata_quirks);
- /* Populate always-on PRCM in l4_wkup to probe l4_wkup */
- np = of_find_node_by_name(NULL, "prcm");
- if (!np)
- np = of_find_node_by_name(NULL, "prm");
- if (np)
- of_platform_populate(np, omap_dt_match_table,
- omap_auxdata_lookup, NULL);
+ pdata_quirks_init_clocks(omap_dt_match_table);
of_platform_populate(NULL, omap_dt_match_table,
omap_auxdata_lookup, NULL);
return -EINVAL;
}
-DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
- pwrdm_suspend_set, "%llu\n");
+DEFINE_DEBUGFS_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
+ pwrdm_suspend_set, "%llu\n");
static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
{
if (!pwrdm) {
pr_debug("powerdomain: %s: invalid powerdomain pointer\n",
__func__);
- return 1;
+ return true;
}
if (pwrdm->pwrsts & PWRSTS_OFF)
- return 1;
+ return true;
if (pwrdm->pwrsts & PWRSTS_RET) {
if (pwrdm->pwrsts_logic_ret & PWRSTS_OFF)
- return 1;
+ return true;
for (i = 0; i < pwrdm->banks; i++)
if (pwrdm->pwrsts_mem_ret[i] & PWRSTS_OFF)
- return 1;
+ return true;
}
for (i = 0; i < pwrdm->banks; i++)
if (pwrdm->pwrsts_mem_on[i] & PWRSTS_OFF)
- return 1;
+ return true;
- return 0;
+ return false;
}
/**
return 0;
}
+#ifdef CONFIG_OMAP_HWMOD
static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
{
struct omap_smartreflex_dev_attr *sr_dev_attr;
return sr_init_by_name(oh->name, sr_dev_attr->sensor_voltdm_name);
}
+#else
+static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
+{
+ return -EINVAL;
+}
+#endif
/*
* API to be called from board files to enable smartreflex
static struct pwm_lookup rx1950_pwm_lookup[] = {
PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000,
PWM_POLARITY_NORMAL),
+ PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", "RX1950 LCD", LCD_PWM_PERIOD,
+ PWM_POLARITY_NORMAL),
};
static struct pwm_device *lcd_pwm;
static int rx1950_backlight_init(struct device *dev)
{
WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
- lcd_pwm = pwm_request(1, "RX1950 LCD");
+ lcd_pwm = pwm_get(dev, "RX1950 LCD");
if (IS_ERR(lcd_pwm)) {
dev_err(dev, "Unable to request PWM for LCD power!\n");
return PTR_ERR(lcd_pwm);
}
/*
- * This is only required to initialize .polarity; all other values are
- * fixed in this driver.
+ * Call pwm_init_state to initialize .polarity and .period. The other
+ * values are fixed in this driver.
*/
pwm_init_state(lcd_pwm, &lcd_pwm_state);
- lcd_pwm_state.period = LCD_PWM_PERIOD;
lcd_pwm_state.duty_cycle = LCD_PWM_DUTY;
rx1950_lcd_power(1);
rx1950_bl_power(0);
rx1950_lcd_power(0);
- pwm_free(lcd_pwm);
+ pwm_put(lcd_pwm);
gpio_free(S3C2410_GPB(0));
}
}
#ifdef CONFIG_HOTPLUG_CPU
-void ux500_cpu_die(unsigned int cpu)
+static void ux500_cpu_die(unsigned int cpu)
{
wfi();
}
static int dma_chan_count;
static int omap_dma_reserve_channels;
-static spinlock_t dma_chan_lock;
+static DEFINE_SPINLOCK(dma_chan_lock);
static struct omap_dma_lch *dma_chan;
static inline void disable_lnk(int lch);
if (!dma_chan)
return -ENOMEM;
- spin_lock_init(&dma_chan_lock);
for (ch = 0; ch < dma_chan_count; ch++) {
omap_clear_dma(ch);
return 0;
}
+/* Interconnect instances to probe before l4_per instances */
+static struct resource early_bus_ranges[] = {
+ /* am3/4 l4_wkup */
+ { .start = 0x44c00000, .end = 0x44c00000 + 0x300000, },
+ /* omap4/5 and dra7 l4_cfg */
+ { .start = 0x4a000000, .end = 0x4a000000 + 0x300000, },
+ /* omap4 l4_wkup */
+ { .start = 0x4a300000, .end = 0x4a300000 + 0x30000, },
+ /* omap5 and dra7 l4_wkup without dra7 dcan segment */
+ { .start = 0x4ae00000, .end = 0x4ae00000 + 0x30000, },
+};
+
+static atomic_t sysc_defer = ATOMIC_INIT(10);
+
+/**
+ * sysc_defer_non_critical - defer non_critical interconnect probing
+ * @ddata: device driver data
+ *
+ * We want to probe l4_cfg and l4_wkup interconnect instances before any
+ * l4_per instances as l4_per instances depend on resources on l4_cfg and
+ * l4_wkup interconnects.
+ */
+static int sysc_defer_non_critical(struct sysc *ddata)
+{
+ struct resource *res;
+ int i;
+
+ if (!atomic_read(&sysc_defer))
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(early_bus_ranges); i++) {
+ res = &early_bus_ranges[i];
+ if (ddata->module_pa >= res->start &&
+ ddata->module_pa <= res->end) {
+ atomic_set(&sysc_defer, 0);
+
+ return 0;
+ }
+ }
+
+ atomic_dec_if_positive(&sysc_defer);
+
+ return -EPROBE_DEFER;
+}
+
static struct device_node *stdout_path;
static void sysc_init_stdout_path(struct sysc *ddata)
struct device_node *np = ddata->dev->of_node;
int error;
- if (!of_get_property(np, "reg", NULL))
- return 0;
-
error = sysc_parse_and_check_child_range(ddata);
if (error)
return error;
+ error = sysc_defer_non_critical(ddata);
+ if (error)
+ return error;
+
sysc_check_children(ddata);
+ if (!of_get_property(np, "reg", NULL))
+ return 0;
+
error = sysc_parse_registers(ddata);
if (error)
return error;
SYSC_QUIRK("dwc3", 0, 0, 0x10, -ENODEV, 0x500a0200, 0xffffffff, 0),
SYSC_QUIRK("d2d", 0x4a0b6000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
SYSC_QUIRK("d2d", 0x4a0cd000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
+ SYSC_QUIRK("elm", 0x48080000, 0, 0x10, 0x14, 0x00000020, 0xffffffff, 0),
+ SYSC_QUIRK("emif", 0, 0, -ENODEV, -ENODEV, 0x40441403, 0xffff0fff, 0),
+ SYSC_QUIRK("emif", 0, 0, -ENODEV, -ENODEV, 0x50440500, 0xffffffff, 0),
SYSC_QUIRK("epwmss", 0, 0, 0x4, -ENODEV, 0x47400001, 0xffffffff, 0),
SYSC_QUIRK("gpu", 0, 0x1fc00, 0x1fc10, -ENODEV, 0, 0, 0),
SYSC_QUIRK("gpu", 0, 0xfe00, 0xfe10, -ENODEV, 0x40000000 , 0xffffffff, 0),
SYSC_QUIRK("hdmi", 0, 0, 0x10, -ENODEV, 0x50031d00, 0xffffffff, 0),
SYSC_QUIRK("hsi", 0, 0, 0x10, 0x14, 0x50043101, 0xffffffff, 0),
SYSC_QUIRK("iss", 0, 0, 0x10, -ENODEV, 0x40000101, 0xffffffff, 0),
+ SYSC_QUIRK("keypad", 0x4a31c000, 0, 0x10, 0x14, 0x00000020, 0xffffffff, 0),
SYSC_QUIRK("mcasp", 0, 0, 0x4, -ENODEV, 0x44306302, 0xffffffff, 0),
SYSC_QUIRK("mcasp", 0, 0, 0x4, -ENODEV, 0x44307b02, 0xffffffff, 0),
SYSC_QUIRK("mcbsp", 0, -ENODEV, 0x8c, -ENODEV, 0, 0, 0),
SYSC_QUIRK("ocp2scp", 0, 0, -ENODEV, -ENODEV, 0x50060007, 0xffffffff, 0),
SYSC_QUIRK("padconf", 0, 0, 0x10, -ENODEV, 0x4fff0800, 0xffffffff, 0),
SYSC_QUIRK("padconf", 0, 0, -ENODEV, -ENODEV, 0x40001100, 0xffffffff, 0),
+ SYSC_QUIRK("pcie", 0x51000000, -ENODEV, -ENODEV, -ENODEV, 0, 0, 0),
+ SYSC_QUIRK("pcie", 0x51800000, -ENODEV, -ENODEV, -ENODEV, 0, 0, 0),
SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000100, 0xffffffff, 0),
SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x00004102, 0xffffffff, 0),
SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000400, 0xffffffff, 0),
SYSC_QUIRK("rfbi", 0x4832a800, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
SYSC_QUIRK("rfbi", 0x58002000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
+ SYSC_QUIRK("sata", 0, 0xfc, 0x1100, -ENODEV, 0x5e412000, 0xffffffff, 0),
SYSC_QUIRK("scm", 0, 0, 0x10, -ENODEV, 0x40000900, 0xffffffff, 0),
SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4e8b0100, 0xffffffff, 0),
SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4f000100, 0xffffffff, 0),
const struct soc_device_attribute *match;
struct ti_sysc_platform_data *pdata;
unsigned long features = 0;
+ struct device_node *np;
if (sysc_soc)
return 0;
if (match && match->data)
sysc_soc->soc = (int)match->data;
+ /*
+ * Check and warn about possible old incomplete dtb. We now want to see
+ * simple-pm-bus instead of simple-bus in the dtb for genpd using SoCs.
+ */
+ switch (sysc_soc->soc) {
+ case SOC_AM3:
+ case SOC_AM4:
+ case SOC_4430 ... SOC_4470:
+ case SOC_5430:
+ case SOC_DRA7:
+ np = of_find_node_by_path("/ocp");
+ WARN_ONCE(np && of_device_is_compatible(np, "simple-bus"),
+ "ti-sysc: Incomplete old dtb, please update\n");
+ break;
+ default:
+ break;
+ }
+
/* Ignore devices that are not available on HS and EMU SoCs */
if (!sysc_soc->general_purpose) {
switch (sysc_soc->soc) {
static const struct omap_clkctrl_reg_data omap5_l3main2_clkctrl_regs[] __initconst = {
{ OMAP5_L3_MAIN_2_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { OMAP5_L3_MAIN_2_GPMC_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
+ { OMAP5_L3_MAIN_2_OCMC_RAM_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
{ 0 },
};
.get_features = dra7xx_pcie_get_features,
};
-static int __init dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx,
- struct platform_device *pdev)
+static int dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx,
+ struct platform_device *pdev)
{
int ret;
struct dw_pcie_ep *ep;
return 0;
}
-static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
- struct platform_device *pdev)
+static int dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
+ struct platform_device *pdev)
{
int ret;
struct dw_pcie *pci = dra7xx->pci;
return 0;
}
-static int __init dra7xx_pcie_probe(struct platform_device *pdev)
+static int dra7xx_pcie_probe(struct platform_device *pdev)
{
u32 reg;
int ret;
};
static struct platform_driver dra7xx_pcie_driver = {
+ .probe = dra7xx_pcie_probe,
.driver = {
.name = "dra7-pcie",
.of_match_table = of_dra7xx_pcie_match,
},
.shutdown = dra7xx_pcie_shutdown,
};
-builtin_platform_driver_probe(dra7xx_pcie_driver, dra7xx_pcie_probe);
+builtin_platform_driver(dra7xx_pcie_driver);
/* Since we request GPIOs from ourself */
#include <linux/pinctrl/consumer.h>
+#include <soc/at91/pm.h>
+
#include "pinctrl-at91.h"
#include "core.h"
#define OMAP_PRM_HAS_RSTCTRL BIT(0)
#define OMAP_PRM_HAS_RSTST BIT(1)
#define OMAP_PRM_HAS_NO_CLKDM BIT(2)
+#define OMAP_PRM_RET_WHEN_IDLE BIT(3)
#define OMAP_PRM_HAS_RESETS (OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_RSTST)
.name = "core", .base = 0x4a306700,
.pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_reton,
.rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ducati",
- .rstmap = rst_map_012
+ .rstmap = rst_map_012,
+ .flags = OMAP_PRM_RET_WHEN_IDLE,
},
{
.name = "ivahd", .base = 0x4a306f00,
},
{
.name = "l4per", .base = 0x4a307400,
- .pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_reton
+ .pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_reton,
+ .flags = OMAP_PRM_RET_WHEN_IDLE,
},
{
.name = "cefuse", .base = 0x4a307600,
{
struct omap_prm_domain *prmd;
int ret;
- u32 v;
+ u32 v, mode;
prmd = genpd_to_prm_domain(domain);
if (!prmd->cap)
else
v = readl_relaxed(prmd->prm->base + prmd->pwrstctrl);
- writel_relaxed(v | OMAP_PRMD_ON_ACTIVE,
+ if (prmd->prm->data->flags & OMAP_PRM_RET_WHEN_IDLE)
+ mode = OMAP_PRMD_RETENTION;
+ else
+ mode = OMAP_PRMD_ON_ACTIVE;
+
+ writel_relaxed((v & ~PRM_POWERSTATE_MASK) | mode,
prmd->prm->base + prmd->pwrstctrl);
/* wait for the transition bit to get cleared */
/* l3main2 clocks */
#define OMAP5_L3_MAIN_2_CLKCTRL OMAP5_CLKCTRL_INDEX(0x20)
+#define OMAP5_L3_MAIN_2_GPMC_CLKCTRL OMAP5_CLKCTRL_INDEX(0x28)
+#define OMAP5_L3_MAIN_2_OCMC_RAM_CLKCTRL OMAP5_CLKCTRL_INDEX(0x30)
/* ipu clocks */
#define OMAP5_MMU_IPU_CLKCTRL OMAP5_CLKCTRL_INDEX(0x20)
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Atmel Power Management
+ *
+ * Copyright (C) 2020 Atmel
+ *
+ * Author: Lee Jones <lee.jones@linaro.org>
+ */
+
+#ifndef __SOC_ATMEL_PM_H
+#define __SOC_ATMEL_PM_H
+
+void at91_pinctrl_gpio_suspend(void);
+void at91_pinctrl_gpio_resume(void);
+
+#endif /* __SOC_ATMEL_PM_H */
projects / linux-2.6-microblaze.git / commitdiff