Merge tag 'for-linus-20191012' of git://git.kernel.dk/linux-block
[linux-2.6-microblaze.git] / net / netfilter / ipvs / Kconfig
1 # SPDX-License-Identifier: GPL-2.0-only
2 #
3 # IP Virtual Server configuration
4 #
5 menuconfig IP_VS
6         tristate "IP virtual server support"
7         depends on NET && INET && NETFILTER
8         depends on (NF_CONNTRACK || NF_CONNTRACK=n)
9         ---help---
10           IP Virtual Server support will let you build a high-performance
11           virtual server based on cluster of two or more real servers. This
12           option must be enabled for at least one of the clustered computers
13           that will take care of intercepting incoming connections to a
14           single IP address and scheduling them to real servers.
15
16           Three request dispatching techniques are implemented, they are
17           virtual server via NAT, virtual server via tunneling and virtual
18           server via direct routing. The several scheduling algorithms can
19           be used to choose which server the connection is directed to,
20           thus load balancing can be achieved among the servers.  For more
21           information and its administration program, please visit the
22           following URL: <http://www.linuxvirtualserver.org/>.
23
24           If you want to compile it in kernel, say Y. To compile it as a
25           module, choose M here. If unsure, say N.
26
27 if IP_VS
28
29 config  IP_VS_IPV6
30         bool "IPv6 support for IPVS"
31         depends on IPV6 = y || IP_VS = IPV6
32         select IP6_NF_IPTABLES
33         select NF_DEFRAG_IPV6
34         ---help---
35           Add IPv6 support to IPVS.
36
37           Say Y if unsure.
38
39 config  IP_VS_DEBUG
40         bool "IP virtual server debugging"
41         ---help---
42           Say Y here if you want to get additional messages useful in
43           debugging the IP virtual server code. You can change the debug
44           level in /proc/sys/net/ipv4/vs/debug_level
45
46 config  IP_VS_TAB_BITS
47         int "IPVS connection table size (the Nth power of 2)"
48         range 8 20
49         default 12
50         ---help---
51           The IPVS connection hash table uses the chaining scheme to handle
52           hash collisions. Using a big IPVS connection hash table will greatly
53           reduce conflicts when there are hundreds of thousands of connections
54           in the hash table.
55
56           Note the table size must be power of 2. The table size will be the
57           value of 2 to the your input number power. The number to choose is
58           from 8 to 20, the default number is 12, which means the table size
59           is 4096. Don't input the number too small, otherwise you will lose
60           performance on it. You can adapt the table size yourself, according
61           to your virtual server application. It is good to set the table size
62           not far less than the number of connections per second multiplying
63           average lasting time of connection in the table.  For example, your
64           virtual server gets 200 connections per second, the connection lasts
65           for 200 seconds in average in the connection table, the table size
66           should be not far less than 200x200, it is good to set the table
67           size 32768 (2**15).
68
69           Another note that each connection occupies 128 bytes effectively and
70           each hash entry uses 8 bytes, so you can estimate how much memory is
71           needed for your box.
72
73           You can overwrite this number setting conn_tab_bits module parameter
74           or by appending ip_vs.conn_tab_bits=? to the kernel command line
75           if IP VS was compiled built-in.
76
77 comment "IPVS transport protocol load balancing support"
78
79 config  IP_VS_PROTO_TCP
80         bool "TCP load balancing support"
81         ---help---
82           This option enables support for load balancing TCP transport
83           protocol. Say Y if unsure.
84
85 config  IP_VS_PROTO_UDP
86         bool "UDP load balancing support"
87         ---help---
88           This option enables support for load balancing UDP transport
89           protocol. Say Y if unsure.
90
91 config  IP_VS_PROTO_AH_ESP
92         def_bool IP_VS_PROTO_ESP || IP_VS_PROTO_AH
93
94 config  IP_VS_PROTO_ESP
95         bool "ESP load balancing support"
96         ---help---
97           This option enables support for load balancing ESP (Encapsulation
98           Security Payload) transport protocol. Say Y if unsure.
99
100 config  IP_VS_PROTO_AH
101         bool "AH load balancing support"
102         ---help---
103           This option enables support for load balancing AH (Authentication
104           Header) transport protocol. Say Y if unsure.
105
106 config  IP_VS_PROTO_SCTP
107         bool "SCTP load balancing support"
108         select LIBCRC32C
109         ---help---
110           This option enables support for load balancing SCTP transport
111           protocol. Say Y if unsure.
112
113 comment "IPVS scheduler"
114
115 config  IP_VS_RR
116         tristate "round-robin scheduling"
117         ---help---
118           The robin-robin scheduling algorithm simply directs network
119           connections to different real servers in a round-robin manner.
120
121           If you want to compile it in kernel, say Y. To compile it as a
122           module, choose M here. If unsure, say N.
123  
124 config  IP_VS_WRR
125         tristate "weighted round-robin scheduling"
126         ---help---
127           The weighted robin-robin scheduling algorithm directs network
128           connections to different real servers based on server weights
129           in a round-robin manner. Servers with higher weights receive
130           new connections first than those with less weights, and servers
131           with higher weights get more connections than those with less
132           weights and servers with equal weights get equal connections.
133
134           If you want to compile it in kernel, say Y. To compile it as a
135           module, choose M here. If unsure, say N.
136
137 config  IP_VS_LC
138         tristate "least-connection scheduling"
139         ---help---
140           The least-connection scheduling algorithm directs network
141           connections to the server with the least number of active 
142           connections.
143
144           If you want to compile it in kernel, say Y. To compile it as a
145           module, choose M here. If unsure, say N.
146
147 config  IP_VS_WLC
148         tristate "weighted least-connection scheduling"
149         ---help---
150           The weighted least-connection scheduling algorithm directs network
151           connections to the server with the least active connections
152           normalized by the server weight.
153
154           If you want to compile it in kernel, say Y. To compile it as a
155           module, choose M here. If unsure, say N.
156
157 config  IP_VS_FO
158                 tristate "weighted failover scheduling"
159         ---help---
160           The weighted failover scheduling algorithm directs network
161           connections to the server with the highest weight that is
162           currently available.
163
164           If you want to compile it in kernel, say Y. To compile it as a
165           module, choose M here. If unsure, say N.
166
167 config  IP_VS_OVF
168         tristate "weighted overflow scheduling"
169         ---help---
170           The weighted overflow scheduling algorithm directs network
171           connections to the server with the highest weight that is
172           currently available and overflows to the next when active
173           connections exceed the node's weight.
174
175           If you want to compile it in kernel, say Y. To compile it as a
176           module, choose M here. If unsure, say N.
177
178 config  IP_VS_LBLC
179         tristate "locality-based least-connection scheduling"
180         ---help---
181           The locality-based least-connection scheduling algorithm is for
182           destination IP load balancing. It is usually used in cache cluster.
183           This algorithm usually directs packet destined for an IP address to
184           its server if the server is alive and under load. If the server is
185           overloaded (its active connection numbers is larger than its weight)
186           and there is a server in its half load, then allocate the weighted
187           least-connection server to this IP address.
188
189           If you want to compile it in kernel, say Y. To compile it as a
190           module, choose M here. If unsure, say N.
191
192 config  IP_VS_LBLCR
193         tristate "locality-based least-connection with replication scheduling"
194         ---help---
195           The locality-based least-connection with replication scheduling
196           algorithm is also for destination IP load balancing. It is 
197           usually used in cache cluster. It differs from the LBLC scheduling
198           as follows: the load balancer maintains mappings from a target
199           to a set of server nodes that can serve the target. Requests for
200           a target are assigned to the least-connection node in the target's
201           server set. If all the node in the server set are over loaded,
202           it picks up a least-connection node in the cluster and adds it
203           in the sever set for the target. If the server set has not been
204           modified for the specified time, the most loaded node is removed
205           from the server set, in order to avoid high degree of replication.
206
207           If you want to compile it in kernel, say Y. To compile it as a
208           module, choose M here. If unsure, say N.
209
210 config  IP_VS_DH
211         tristate "destination hashing scheduling"
212         ---help---
213           The destination hashing scheduling algorithm assigns network
214           connections to the servers through looking up a statically assigned
215           hash table by their destination IP addresses.
216
217           If you want to compile it in kernel, say Y. To compile it as a
218           module, choose M here. If unsure, say N.
219
220 config  IP_VS_SH
221         tristate "source hashing scheduling"
222         ---help---
223           The source hashing scheduling algorithm assigns network
224           connections to the servers through looking up a statically assigned
225           hash table by their source IP addresses.
226
227           If you want to compile it in kernel, say Y. To compile it as a
228           module, choose M here. If unsure, say N.
229
230 config  IP_VS_MH
231         tristate "maglev hashing scheduling"
232         ---help---
233           The maglev consistent hashing scheduling algorithm provides the
234           Google's Maglev hashing algorithm as a IPVS scheduler. It assigns
235           network connections to the servers through looking up a statically
236           assigned special hash table called the lookup table. Maglev hashing
237           is to assign a preference list of all the lookup table positions
238           to each destination.
239
240           Through this operation, The maglev hashing gives an almost equal
241           share of the lookup table to each of the destinations and provides
242           minimal disruption by using the lookup table. When the set of
243           destinations changes, a connection will likely be sent to the same
244           destination as it was before.
245
246           If you want to compile it in kernel, say Y. To compile it as a
247           module, choose M here. If unsure, say N.
248
249 config  IP_VS_SED
250         tristate "shortest expected delay scheduling"
251         ---help---
252           The shortest expected delay scheduling algorithm assigns network
253           connections to the server with the shortest expected delay. The 
254           expected delay that the job will experience is (Ci + 1) / Ui if 
255           sent to the ith server, in which Ci is the number of connections
256           on the ith server and Ui is the fixed service rate (weight)
257           of the ith server.
258
259           If you want to compile it in kernel, say Y. To compile it as a
260           module, choose M here. If unsure, say N.
261
262 config  IP_VS_NQ
263         tristate "never queue scheduling"
264         ---help---
265           The never queue scheduling algorithm adopts a two-speed model.
266           When there is an idle server available, the job will be sent to
267           the idle server, instead of waiting for a fast one. When there
268           is no idle server available, the job will be sent to the server
269           that minimize its expected delay (The Shortest Expected Delay
270           scheduling algorithm).
271
272           If you want to compile it in kernel, say Y. To compile it as a
273           module, choose M here. If unsure, say N.
274
275 comment 'IPVS SH scheduler'
276
277 config IP_VS_SH_TAB_BITS
278         int "IPVS source hashing table size (the Nth power of 2)"
279         range 4 20
280         default 8
281         ---help---
282           The source hashing scheduler maps source IPs to destinations
283           stored in a hash table. This table is tiled by each destination
284           until all slots in the table are filled. When using weights to
285           allow destinations to receive more connections, the table is
286           tiled an amount proportional to the weights specified. The table
287           needs to be large enough to effectively fit all the destinations
288           multiplied by their respective weights.
289
290 comment 'IPVS MH scheduler'
291
292 config IP_VS_MH_TAB_INDEX
293         int "IPVS maglev hashing table index of size (the prime numbers)"
294         range 8 17
295         default 12
296         ---help---
297           The maglev hashing scheduler maps source IPs to destinations
298           stored in a hash table. This table is assigned by a preference
299           list of the positions to each destination until all slots in
300           the table are filled. The index determines the prime for size of
301           the table as 251, 509, 1021, 2039, 4093, 8191, 16381, 32749,
302           65521 or 131071. When using weights to allow destinations to
303           receive more connections, the table is assigned an amount
304           proportional to the weights specified. The table needs to be large
305           enough to effectively fit all the destinations multiplied by their
306           respective weights.
307
308 comment 'IPVS application helper'
309
310 config  IP_VS_FTP
311         tristate "FTP protocol helper"
312         depends on IP_VS_PROTO_TCP && NF_CONNTRACK && NF_NAT && \
313                 NF_CONNTRACK_FTP
314         select IP_VS_NFCT
315         ---help---
316           FTP is a protocol that transfers IP address and/or port number in
317           the payload. In the virtual server via Network Address Translation,
318           the IP address and port number of real servers cannot be sent to
319           clients in ftp connections directly, so FTP protocol helper is
320           required for tracking the connection and mangling it back to that of
321           virtual service.
322
323           If you want to compile it in kernel, say Y. To compile it as a
324           module, choose M here. If unsure, say N.
325
326 config  IP_VS_NFCT
327         bool "Netfilter connection tracking"
328         depends on NF_CONNTRACK
329         ---help---
330           The Netfilter connection tracking support allows the IPVS
331           connection state to be exported to the Netfilter framework
332           for filtering purposes.
333
334 config  IP_VS_PE_SIP
335         tristate "SIP persistence engine"
336         depends on IP_VS_PROTO_UDP
337         depends on NF_CONNTRACK_SIP
338         ---help---
339           Allow persistence based on the SIP Call-ID
340
341 endif # IP_VS