net/mac80211/spectmgmt.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * spectrum management
   4  *
   5  * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
   6  * Copyright 2002-2005, Instant802 Networks, Inc.
   7  * Copyright 2005-2006, Devicescape Software, Inc.
   8  * Copyright 2006-2007  Jiri Benc <jbenc@suse.cz>
   9  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
  10  * Copyright 2007-2008, Intel Corporation
  11  * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
  12  * Copyright (C) 2018, 2020 Intel Corporation
  13  */
  14
  15 #include <linux/ieee80211.h>
  16 #include <net/cfg80211.h>
  17 #include <net/mac80211.h>
  18 #include "ieee80211_i.h"
  19 #include "sta_info.h"
  20 #include "wme.h"
  21
  22 int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
  23                                  struct ieee802_11_elems *elems,
  24                                  enum nl80211_band current_band,
  25                                  u32 vht_cap_info,
  26                                  u32 sta_flags, u8 *bssid,
  27                                  struct ieee80211_csa_ie *csa_ie)
  28 {
  29         enum nl80211_band new_band = current_band;
  30         int new_freq;
  31         u8 new_chan_no;
  32         struct ieee80211_channel *new_chan;
  33         struct cfg80211_chan_def new_vht_chandef = {};
  34         const struct ieee80211_sec_chan_offs_ie *sec_chan_offs;
  35         const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie;
  36         int secondary_channel_offset = -1;
  37
  38         memset(csa_ie, 0, sizeof(*csa_ie));
  39
  40         sec_chan_offs = elems->sec_chan_offs;
  41         wide_bw_chansw_ie = elems->wide_bw_chansw_ie;
  42
  43         if (sta_flags & (IEEE80211_STA_DISABLE_HT |
  44                          IEEE80211_STA_DISABLE_40MHZ)) {
  45                 sec_chan_offs = NULL;
  46                 wide_bw_chansw_ie = NULL;
  47         }
  48
  49         if (sta_flags & IEEE80211_STA_DISABLE_VHT)
  50                 wide_bw_chansw_ie = NULL;
  51
  52         if (elems->ext_chansw_ie) {
  53                 if (!ieee80211_operating_class_to_band(
  54                                 elems->ext_chansw_ie->new_operating_class,
  55                                 &new_band)) {
  56                         sdata_info(sdata,
  57                                    "cannot understand ECSA IE operating class, %d, ignoring\n",
  58                                    elems->ext_chansw_ie->new_operating_class);
  59                 }
  60                 new_chan_no = elems->ext_chansw_ie->new_ch_num;
  61                 csa_ie->count = elems->ext_chansw_ie->count;
  62                 csa_ie->mode = elems->ext_chansw_ie->mode;
  63         } else if (elems->ch_switch_ie) {
  64                 new_chan_no = elems->ch_switch_ie->new_ch_num;
  65                 csa_ie->count = elems->ch_switch_ie->count;
  66                 csa_ie->mode = elems->ch_switch_ie->mode;
  67         } else {
  68                 /* nothing here we understand */
  69                 return 1;
  70         }
  71
  72         /* Mesh Channel Switch Parameters Element */
  73         if (elems->mesh_chansw_params_ie) {
  74                 csa_ie->ttl = elems->mesh_chansw_params_ie->mesh_ttl;
  75                 csa_ie->mode = elems->mesh_chansw_params_ie->mesh_flags;
  76                 csa_ie->pre_value = le16_to_cpu(
  77                                 elems->mesh_chansw_params_ie->mesh_pre_value);
  78
  79                 if (elems->mesh_chansw_params_ie->mesh_flags &
  80                                 WLAN_EID_CHAN_SWITCH_PARAM_REASON)
  81                         csa_ie->reason_code = le16_to_cpu(
  82                                 elems->mesh_chansw_params_ie->mesh_reason);
  83         }
  84
  85         new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band);
  86         new_chan = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq);
  87         if (!new_chan || new_chan->flags & IEEE80211_CHAN_DISABLED) {
  88                 sdata_info(sdata,
  89                            "BSS %pM switches to unsupported channel (%d MHz), disconnecting\n",
  90                            bssid, new_freq);
  91                 return -EINVAL;
  92         }
  93
  94         if (sec_chan_offs) {
  95                 secondary_channel_offset = sec_chan_offs->sec_chan_offs;
  96         } else if (!(sta_flags & IEEE80211_STA_DISABLE_HT)) {
  97                 /* If the secondary channel offset IE is not present,
  98                  * we can't know what's the post-CSA offset, so the
  99                  * best we can do is use 20MHz.
 100                 */
 101                 secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
 102         }
 103
 104         switch (secondary_channel_offset) {
 105         default:
 106                 /* secondary_channel_offset was present but is invalid */
 107         case IEEE80211_HT_PARAM_CHA_SEC_NONE:
 108                 cfg80211_chandef_create(&csa_ie->chandef, new_chan,
 109                                         NL80211_CHAN_HT20);
 110                 break;
 111         case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
 112                 cfg80211_chandef_create(&csa_ie->chandef, new_chan,
 113                                         NL80211_CHAN_HT40PLUS);
 114                 break;
 115         case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
 116                 cfg80211_chandef_create(&csa_ie->chandef, new_chan,
 117                                         NL80211_CHAN_HT40MINUS);
 118                 break;
 119         case -1:
 120                 cfg80211_chandef_create(&csa_ie->chandef, new_chan,
 121                                         NL80211_CHAN_NO_HT);
 122                 /* keep width for 5/10 MHz channels */
 123                 switch (sdata->vif.bss_conf.chandef.width) {
 124                 case NL80211_CHAN_WIDTH_5:
 125                 case NL80211_CHAN_WIDTH_10:
 126                         csa_ie->chandef.width =
 127                                 sdata->vif.bss_conf.chandef.width;
 128                         break;
 129                 default:
 130                         break;
 131                 }
 132                 break;
 133         }
 134
 135         if (wide_bw_chansw_ie) {
 136                 u8 new_seg1 = wide_bw_chansw_ie->new_center_freq_seg1;
 137                 struct ieee80211_vht_operation vht_oper = {
 138                         .chan_width =
 139                                 wide_bw_chansw_ie->new_channel_width,
 140                         .center_freq_seg0_idx =
 141                                 wide_bw_chansw_ie->new_center_freq_seg0,
 142                         .center_freq_seg1_idx = new_seg1,
 143                         /* .basic_mcs_set doesn't matter */
 144                 };
 145                 struct ieee80211_ht_operation ht_oper = {
 146                         .operation_mode =
 147                                 cpu_to_le16(new_seg1 <<
 148                                             IEEE80211_HT_OP_MODE_CCFS2_SHIFT),
 149                 };
 150
 151                 /* default, for the case of IEEE80211_VHT_CHANWIDTH_USE_HT,
 152                  * to the previously parsed chandef
 153                  */
 154                 new_vht_chandef = csa_ie->chandef;
 155
 156                 /* ignore if parsing fails */
 157                 if (!ieee80211_chandef_vht_oper(&sdata->local->hw,
 158                                                 vht_cap_info,
 159                                                 &vht_oper, &ht_oper,
 160                                                 &new_vht_chandef))
 161                         new_vht_chandef.chan = NULL;
 162
 163                 if (sta_flags & IEEE80211_STA_DISABLE_80P80MHZ &&
 164                     new_vht_chandef.width == NL80211_CHAN_WIDTH_80P80)
 165                         ieee80211_chandef_downgrade(&new_vht_chandef);
 166                 if (sta_flags & IEEE80211_STA_DISABLE_160MHZ &&
 167                     new_vht_chandef.width == NL80211_CHAN_WIDTH_160)
 168                         ieee80211_chandef_downgrade(&new_vht_chandef);
 169         }
 170
 171         /* if VHT data is there validate & use it */
 172         if (new_vht_chandef.chan) {
 173                 if (!cfg80211_chandef_compatible(&new_vht_chandef,
 174                                                  &csa_ie->chandef)) {
 175                         sdata_info(sdata,
 176                                    "BSS %pM: CSA has inconsistent channel data, disconnecting\n",
 177                                    bssid);
 178                         return -EINVAL;
 179                 }
 180                 csa_ie->chandef = new_vht_chandef;
 181         }
 182
 183         if (elems->max_channel_switch_time)
 184                 csa_ie->max_switch_time =
 185                         (elems->max_channel_switch_time[0] << 0) |
 186                         (elems->max_channel_switch_time[1] <<  8) |
 187                         (elems->max_channel_switch_time[2] << 16);
 188
 189         return 0;
 190 }
 191
 192 static void ieee80211_send_refuse_measurement_request(struct ieee80211_sub_if_data *sdata,
 193                                         struct ieee80211_msrment_ie *request_ie,
 194                                         const u8 *da, const u8 *bssid,
 195                                         u8 dialog_token)
 196 {
 197         struct ieee80211_local *local = sdata->local;
 198         struct sk_buff *skb;
 199         struct ieee80211_mgmt *msr_report;
 200
 201         skb = dev_alloc_skb(sizeof(*msr_report) + local->hw.extra_tx_headroom +
 202                                 sizeof(struct ieee80211_msrment_ie));
 203         if (!skb)
 204                 return;
 205
 206         skb_reserve(skb, local->hw.extra_tx_headroom);
 207         msr_report = skb_put_zero(skb, 24);
 208         memcpy(msr_report->da, da, ETH_ALEN);
 209         memcpy(msr_report->sa, sdata->vif.addr, ETH_ALEN);
 210         memcpy(msr_report->bssid, bssid, ETH_ALEN);
 211         msr_report->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 212                                                 IEEE80211_STYPE_ACTION);
 213
 214         skb_put(skb, 1 + sizeof(msr_report->u.action.u.measurement));
 215         msr_report->u.action.category = WLAN_CATEGORY_SPECTRUM_MGMT;
 216         msr_report->u.action.u.measurement.action_code =
 217                                 WLAN_ACTION_SPCT_MSR_RPRT;
 218         msr_report->u.action.u.measurement.dialog_token = dialog_token;
 219
 220         msr_report->u.action.u.measurement.element_id = WLAN_EID_MEASURE_REPORT;
 221         msr_report->u.action.u.measurement.length =
 222                         sizeof(struct ieee80211_msrment_ie);
 223
 224         memset(&msr_report->u.action.u.measurement.msr_elem, 0,
 225                 sizeof(struct ieee80211_msrment_ie));
 226         msr_report->u.action.u.measurement.msr_elem.token = request_ie->token;
 227         msr_report->u.action.u.measurement.msr_elem.mode |=
 228                         IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED;
 229         msr_report->u.action.u.measurement.msr_elem.type = request_ie->type;
 230
 231         ieee80211_tx_skb(sdata, skb);
 232 }
 233
 234 void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
 235                                        struct ieee80211_mgmt *mgmt,
 236                                        size_t len)
 237 {
 238         /*
 239          * Ignoring measurement request is spec violation.
 240          * Mandatory measurements must be reported optional
 241          * measurements might be refused or reported incapable
 242          * For now just refuse
 243          * TODO: Answer basic measurement as unmeasured
 244          */
 245         ieee80211_send_refuse_measurement_request(sdata,
 246                         &mgmt->u.action.u.measurement.msr_elem,
 247                         mgmt->sa, mgmt->bssid,
 248                         mgmt->u.action.u.measurement.dialog_token);
 249 }