Merge branch 'akpm' (patches from Andrew)
[linux-2.6-microblaze.git] / net / mac80211 / agg-tx.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * HT handling
4  *
5  * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
6  * Copyright 2002-2005, Instant802 Networks, Inc.
7  * Copyright 2005-2006, Devicescape Software, Inc.
8  * Copyright 2006-2007  Jiri Benc <jbenc@suse.cz>
9  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
10  * Copyright 2007-2010, Intel Corporation
11  * Copyright(c) 2015-2017 Intel Deutschland GmbH
12  * Copyright (C) 2018 - 2020 Intel Corporation
13  */
14
15 #include <linux/ieee80211.h>
16 #include <linux/slab.h>
17 #include <linux/export.h>
18 #include <net/mac80211.h>
19 #include "ieee80211_i.h"
20 #include "driver-ops.h"
21 #include "wme.h"
22
23 /**
24  * DOC: TX A-MPDU aggregation
25  *
26  * Aggregation on the TX side requires setting the hardware flag
27  * %IEEE80211_HW_AMPDU_AGGREGATION. The driver will then be handed
28  * packets with a flag indicating A-MPDU aggregation. The driver
29  * or device is responsible for actually aggregating the frames,
30  * as well as deciding how many and which to aggregate.
31  *
32  * When TX aggregation is started by some subsystem (usually the rate
33  * control algorithm would be appropriate) by calling the
34  * ieee80211_start_tx_ba_session() function, the driver will be
35  * notified via its @ampdu_action function, with the
36  * %IEEE80211_AMPDU_TX_START action.
37  *
38  * In response to that, the driver is later required to call the
39  * ieee80211_start_tx_ba_cb_irqsafe() function, which will really
40  * start the aggregation session after the peer has also responded.
41  * If the peer responds negatively, the session will be stopped
42  * again right away. Note that it is possible for the aggregation
43  * session to be stopped before the driver has indicated that it
44  * is done setting it up, in which case it must not indicate the
45  * setup completion.
46  *
47  * Also note that, since we also need to wait for a response from
48  * the peer, the driver is notified of the completion of the
49  * handshake by the %IEEE80211_AMPDU_TX_OPERATIONAL action to the
50  * @ampdu_action callback.
51  *
52  * Similarly, when the aggregation session is stopped by the peer
53  * or something calling ieee80211_stop_tx_ba_session(), the driver's
54  * @ampdu_action function will be called with the action
55  * %IEEE80211_AMPDU_TX_STOP. In this case, the call must not fail,
56  * and the driver must later call ieee80211_stop_tx_ba_cb_irqsafe().
57  * Note that the sta can get destroyed before the BA tear down is
58  * complete.
59  */
60
61 static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata,
62                                          const u8 *da, u16 tid,
63                                          u8 dialog_token, u16 start_seq_num,
64                                          u16 agg_size, u16 timeout)
65 {
66         struct ieee80211_local *local = sdata->local;
67         struct sk_buff *skb;
68         struct ieee80211_mgmt *mgmt;
69         u16 capab;
70
71         skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
72
73         if (!skb)
74                 return;
75
76         skb_reserve(skb, local->hw.extra_tx_headroom);
77         mgmt = skb_put_zero(skb, 24);
78         memcpy(mgmt->da, da, ETH_ALEN);
79         memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
80         if (sdata->vif.type == NL80211_IFTYPE_AP ||
81             sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
82             sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
83                 memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
84         else if (sdata->vif.type == NL80211_IFTYPE_STATION)
85                 memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
86         else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
87                 memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
88
89         mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
90                                           IEEE80211_STYPE_ACTION);
91
92         skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_req));
93
94         mgmt->u.action.category = WLAN_CATEGORY_BACK;
95         mgmt->u.action.u.addba_req.action_code = WLAN_ACTION_ADDBA_REQ;
96
97         mgmt->u.action.u.addba_req.dialog_token = dialog_token;
98         capab = IEEE80211_ADDBA_PARAM_AMSDU_MASK;
99         capab |= IEEE80211_ADDBA_PARAM_POLICY_MASK;
100         capab |= u16_encode_bits(tid, IEEE80211_ADDBA_PARAM_TID_MASK);
101         capab |= u16_encode_bits(agg_size, IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK);
102
103         mgmt->u.action.u.addba_req.capab = cpu_to_le16(capab);
104
105         mgmt->u.action.u.addba_req.timeout = cpu_to_le16(timeout);
106         mgmt->u.action.u.addba_req.start_seq_num =
107                                         cpu_to_le16(start_seq_num << 4);
108
109         ieee80211_tx_skb(sdata, skb);
110 }
111
112 void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn)
113 {
114         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
115         struct ieee80211_local *local = sdata->local;
116         struct sk_buff *skb;
117         struct ieee80211_bar *bar;
118         u16 bar_control = 0;
119
120         skb = dev_alloc_skb(sizeof(*bar) + local->hw.extra_tx_headroom);
121         if (!skb)
122                 return;
123
124         skb_reserve(skb, local->hw.extra_tx_headroom);
125         bar = skb_put_zero(skb, sizeof(*bar));
126         bar->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL |
127                                          IEEE80211_STYPE_BACK_REQ);
128         memcpy(bar->ra, ra, ETH_ALEN);
129         memcpy(bar->ta, sdata->vif.addr, ETH_ALEN);
130         bar_control |= (u16)IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL;
131         bar_control |= (u16)IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA;
132         bar_control |= (u16)(tid << IEEE80211_BAR_CTRL_TID_INFO_SHIFT);
133         bar->control = cpu_to_le16(bar_control);
134         bar->start_seq_num = cpu_to_le16(ssn);
135
136         IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
137                                         IEEE80211_TX_CTL_REQ_TX_STATUS;
138         ieee80211_tx_skb_tid(sdata, skb, tid);
139 }
140 EXPORT_SYMBOL(ieee80211_send_bar);
141
142 void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
143                              struct tid_ampdu_tx *tid_tx)
144 {
145         lockdep_assert_held(&sta->ampdu_mlme.mtx);
146         lockdep_assert_held(&sta->lock);
147         rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
148 }
149
150 /*
151  * When multiple aggregation sessions on multiple stations
152  * are being created/destroyed simultaneously, we need to
153  * refcount the global queue stop caused by that in order
154  * to not get into a situation where one of the aggregation
155  * setup or teardown re-enables queues before the other is
156  * ready to handle that.
157  *
158  * These two functions take care of this issue by keeping
159  * a global "agg_queue_stop" refcount.
160  */
161 static void __acquires(agg_queue)
162 ieee80211_stop_queue_agg(struct ieee80211_sub_if_data *sdata, int tid)
163 {
164         int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
165
166         /* we do refcounting here, so don't use the queue reason refcounting */
167
168         if (atomic_inc_return(&sdata->local->agg_queue_stop[queue]) == 1)
169                 ieee80211_stop_queue_by_reason(
170                         &sdata->local->hw, queue,
171                         IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
172                         false);
173         __acquire(agg_queue);
174 }
175
176 static void __releases(agg_queue)
177 ieee80211_wake_queue_agg(struct ieee80211_sub_if_data *sdata, int tid)
178 {
179         int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
180
181         if (atomic_dec_return(&sdata->local->agg_queue_stop[queue]) == 0)
182                 ieee80211_wake_queue_by_reason(
183                         &sdata->local->hw, queue,
184                         IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
185                         false);
186         __release(agg_queue);
187 }
188
189 static void
190 ieee80211_agg_stop_txq(struct sta_info *sta, int tid)
191 {
192         struct ieee80211_txq *txq = sta->sta.txq[tid];
193         struct ieee80211_sub_if_data *sdata;
194         struct fq *fq;
195         struct txq_info *txqi;
196
197         if (!txq)
198                 return;
199
200         txqi = to_txq_info(txq);
201         sdata = vif_to_sdata(txq->vif);
202         fq = &sdata->local->fq;
203
204         /* Lock here to protect against further seqno updates on dequeue */
205         spin_lock_bh(&fq->lock);
206         set_bit(IEEE80211_TXQ_STOP, &txqi->flags);
207         spin_unlock_bh(&fq->lock);
208 }
209
210 static void
211 ieee80211_agg_start_txq(struct sta_info *sta, int tid, bool enable)
212 {
213         struct ieee80211_txq *txq = sta->sta.txq[tid];
214         struct txq_info *txqi;
215
216         if (!txq)
217                 return;
218
219         txqi = to_txq_info(txq);
220
221         if (enable)
222                 set_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
223         else
224                 clear_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
225
226         clear_bit(IEEE80211_TXQ_STOP, &txqi->flags);
227         local_bh_disable();
228         rcu_read_lock();
229         schedule_and_wake_txq(sta->sdata->local, txqi);
230         rcu_read_unlock();
231         local_bh_enable();
232 }
233
234 /*
235  * splice packets from the STA's pending to the local pending,
236  * requires a call to ieee80211_agg_splice_finish later
237  */
238 static void __acquires(agg_queue)
239 ieee80211_agg_splice_packets(struct ieee80211_sub_if_data *sdata,
240                              struct tid_ampdu_tx *tid_tx, u16 tid)
241 {
242         struct ieee80211_local *local = sdata->local;
243         int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
244         unsigned long flags;
245
246         ieee80211_stop_queue_agg(sdata, tid);
247
248         if (WARN(!tid_tx,
249                  "TID %d gone but expected when splicing aggregates from the pending queue\n",
250                  tid))
251                 return;
252
253         if (!skb_queue_empty(&tid_tx->pending)) {
254                 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
255                 /* copy over remaining packets */
256                 skb_queue_splice_tail_init(&tid_tx->pending,
257                                            &local->pending[queue]);
258                 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
259         }
260 }
261
262 static void __releases(agg_queue)
263 ieee80211_agg_splice_finish(struct ieee80211_sub_if_data *sdata, u16 tid)
264 {
265         ieee80211_wake_queue_agg(sdata, tid);
266 }
267
268 static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid)
269 {
270         struct tid_ampdu_tx *tid_tx;
271
272         lockdep_assert_held(&sta->ampdu_mlme.mtx);
273         lockdep_assert_held(&sta->lock);
274
275         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
276
277         /*
278          * When we get here, the TX path will not be lockless any more wrt.
279          * aggregation, since the OPERATIONAL bit has long been cleared.
280          * Thus it will block on getting the lock, if it occurs. So if we
281          * stop the queue now, we will not get any more packets, and any
282          * that might be being processed will wait for us here, thereby
283          * guaranteeing that no packets go to the tid_tx pending queue any
284          * more.
285          */
286
287         ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid);
288
289         /* future packets must not find the tid_tx struct any more */
290         ieee80211_assign_tid_tx(sta, tid, NULL);
291
292         ieee80211_agg_splice_finish(sta->sdata, tid);
293         ieee80211_agg_start_txq(sta, tid, false);
294
295         kfree_rcu(tid_tx, rcu_head);
296 }
297
298 int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
299                                     enum ieee80211_agg_stop_reason reason)
300 {
301         struct ieee80211_local *local = sta->local;
302         struct tid_ampdu_tx *tid_tx;
303         struct ieee80211_ampdu_params params = {
304                 .sta = &sta->sta,
305                 .tid = tid,
306                 .buf_size = 0,
307                 .amsdu = false,
308                 .timeout = 0,
309                 .ssn = 0,
310         };
311         int ret;
312
313         lockdep_assert_held(&sta->ampdu_mlme.mtx);
314
315         switch (reason) {
316         case AGG_STOP_DECLINED:
317         case AGG_STOP_LOCAL_REQUEST:
318         case AGG_STOP_PEER_REQUEST:
319                 params.action = IEEE80211_AMPDU_TX_STOP_CONT;
320                 break;
321         case AGG_STOP_DESTROY_STA:
322                 params.action = IEEE80211_AMPDU_TX_STOP_FLUSH;
323                 break;
324         default:
325                 WARN_ON_ONCE(1);
326                 return -EINVAL;
327         }
328
329         spin_lock_bh(&sta->lock);
330
331         /* free struct pending for start, if present */
332         tid_tx = sta->ampdu_mlme.tid_start_tx[tid];
333         kfree(tid_tx);
334         sta->ampdu_mlme.tid_start_tx[tid] = NULL;
335
336         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
337         if (!tid_tx) {
338                 spin_unlock_bh(&sta->lock);
339                 return -ENOENT;
340         }
341
342         /*
343          * if we're already stopping ignore any new requests to stop
344          * unless we're destroying it in which case notify the driver
345          */
346         if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
347                 spin_unlock_bh(&sta->lock);
348                 if (reason != AGG_STOP_DESTROY_STA)
349                         return -EALREADY;
350                 params.action = IEEE80211_AMPDU_TX_STOP_FLUSH_CONT;
351                 ret = drv_ampdu_action(local, sta->sdata, &params);
352                 WARN_ON_ONCE(ret);
353                 return 0;
354         }
355
356         if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
357                 /* not even started yet! */
358                 ieee80211_assign_tid_tx(sta, tid, NULL);
359                 spin_unlock_bh(&sta->lock);
360                 kfree_rcu(tid_tx, rcu_head);
361                 return 0;
362         }
363
364         set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
365
366         ieee80211_agg_stop_txq(sta, tid);
367
368         spin_unlock_bh(&sta->lock);
369
370         ht_dbg(sta->sdata, "Tx BA session stop requested for %pM tid %u\n",
371                sta->sta.addr, tid);
372
373         del_timer_sync(&tid_tx->addba_resp_timer);
374         del_timer_sync(&tid_tx->session_timer);
375
376         /*
377          * After this packets are no longer handed right through
378          * to the driver but are put onto tid_tx->pending instead,
379          * with locking to ensure proper access.
380          */
381         clear_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
382
383         /*
384          * There might be a few packets being processed right now (on
385          * another CPU) that have already gotten past the aggregation
386          * check when it was still OPERATIONAL and consequently have
387          * IEEE80211_TX_CTL_AMPDU set. In that case, this code might
388          * call into the driver at the same time or even before the
389          * TX paths calls into it, which could confuse the driver.
390          *
391          * Wait for all currently running TX paths to finish before
392          * telling the driver. New packets will not go through since
393          * the aggregation session is no longer OPERATIONAL.
394          */
395         if (!local->in_reconfig)
396                 synchronize_net();
397
398         tid_tx->stop_initiator = reason == AGG_STOP_PEER_REQUEST ?
399                                         WLAN_BACK_RECIPIENT :
400                                         WLAN_BACK_INITIATOR;
401         tid_tx->tx_stop = reason == AGG_STOP_LOCAL_REQUEST;
402
403         ret = drv_ampdu_action(local, sta->sdata, &params);
404
405         /* HW shall not deny going back to legacy */
406         if (WARN_ON(ret)) {
407                 /*
408                  * We may have pending packets get stuck in this case...
409                  * Not bothering with a workaround for now.
410                  */
411         }
412
413         /*
414          * In the case of AGG_STOP_DESTROY_STA, the driver won't
415          * necessarily call ieee80211_stop_tx_ba_cb(), so this may
416          * seem like we can leave the tid_tx data pending forever.
417          * This is true, in a way, but "forever" is only until the
418          * station struct is actually destroyed. In the meantime,
419          * leaving it around ensures that we don't transmit packets
420          * to the driver on this TID which might confuse it.
421          */
422
423         return 0;
424 }
425
426 /*
427  * After sending add Block Ack request we activated a timer until
428  * add Block Ack response will arrive from the recipient.
429  * If this timer expires sta_addba_resp_timer_expired will be executed.
430  */
431 static void sta_addba_resp_timer_expired(struct timer_list *t)
432 {
433         struct tid_ampdu_tx *tid_tx = from_timer(tid_tx, t, addba_resp_timer);
434         struct sta_info *sta = tid_tx->sta;
435         u8 tid = tid_tx->tid;
436
437         /* check if the TID waits for addBA response */
438         if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) {
439                 ht_dbg(sta->sdata,
440                        "timer expired on %pM tid %d not expecting addBA response\n",
441                        sta->sta.addr, tid);
442                 return;
443         }
444
445         ht_dbg(sta->sdata, "addBA response timer expired on %pM tid %d\n",
446                sta->sta.addr, tid);
447
448         ieee80211_stop_tx_ba_session(&sta->sta, tid);
449 }
450
451 static void ieee80211_send_addba_with_timeout(struct sta_info *sta,
452                                               struct tid_ampdu_tx *tid_tx)
453 {
454         struct ieee80211_sub_if_data *sdata = sta->sdata;
455         struct ieee80211_local *local = sta->local;
456         u8 tid = tid_tx->tid;
457         u16 buf_size;
458
459         /* activate the timer for the recipient's addBA response */
460         mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
461         ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
462                sta->sta.addr, tid);
463
464         spin_lock_bh(&sta->lock);
465         sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
466         sta->ampdu_mlme.addba_req_num[tid]++;
467         spin_unlock_bh(&sta->lock);
468
469         if (sta->sta.he_cap.has_he) {
470                 buf_size = local->hw.max_tx_aggregation_subframes;
471         } else {
472                 /*
473                  * We really should use what the driver told us it will
474                  * transmit as the maximum, but certain APs (e.g. the
475                  * LinkSys WRT120N with FW v1.0.07 build 002 Jun 18 2012)
476                  * will crash when we use a lower number.
477                  */
478                 buf_size = IEEE80211_MAX_AMPDU_BUF_HT;
479         }
480
481         /* send AddBA request */
482         ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
483                                      tid_tx->dialog_token,
484                                      sta->tid_seq[tid] >> 4,
485                                      buf_size, tid_tx->timeout);
486
487         WARN_ON(test_and_set_bit(HT_AGG_STATE_SENT_ADDBA, &tid_tx->state));
488 }
489
490 void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
491 {
492         struct tid_ampdu_tx *tid_tx;
493         struct ieee80211_local *local = sta->local;
494         struct ieee80211_sub_if_data *sdata = sta->sdata;
495         struct ieee80211_ampdu_params params = {
496                 .sta = &sta->sta,
497                 .action = IEEE80211_AMPDU_TX_START,
498                 .tid = tid,
499                 .buf_size = 0,
500                 .amsdu = false,
501                 .timeout = 0,
502         };
503         int ret;
504
505         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
506
507         /*
508          * Start queuing up packets for this aggregation session.
509          * We're going to release them once the driver is OK with
510          * that.
511          */
512         clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
513
514         ieee80211_agg_stop_txq(sta, tid);
515
516         /*
517          * Make sure no packets are being processed. This ensures that
518          * we have a valid starting sequence number and that in-flight
519          * packets have been flushed out and no packets for this TID
520          * will go into the driver during the ampdu_action call.
521          */
522         synchronize_net();
523
524         params.ssn = sta->tid_seq[tid] >> 4;
525         ret = drv_ampdu_action(local, sdata, &params);
526         if (ret == IEEE80211_AMPDU_TX_START_DELAY_ADDBA) {
527                 return;
528         } else if (ret == IEEE80211_AMPDU_TX_START_IMMEDIATE) {
529                 /*
530                  * We didn't send the request yet, so don't need to check
531                  * here if we already got a response, just mark as driver
532                  * ready immediately.
533                  */
534                 set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state);
535         } else if (ret) {
536                 ht_dbg(sdata,
537                        "BA request denied - HW unavailable for %pM tid %d\n",
538                        sta->sta.addr, tid);
539                 spin_lock_bh(&sta->lock);
540                 ieee80211_agg_splice_packets(sdata, tid_tx, tid);
541                 ieee80211_assign_tid_tx(sta, tid, NULL);
542                 ieee80211_agg_splice_finish(sdata, tid);
543                 spin_unlock_bh(&sta->lock);
544
545                 ieee80211_agg_start_txq(sta, tid, false);
546
547                 kfree_rcu(tid_tx, rcu_head);
548                 return;
549         }
550
551         ieee80211_send_addba_with_timeout(sta, tid_tx);
552 }
553
554 /*
555  * After accepting the AddBA Response we activated a timer,
556  * resetting it after each frame that we send.
557  */
558 static void sta_tx_agg_session_timer_expired(struct timer_list *t)
559 {
560         struct tid_ampdu_tx *tid_tx = from_timer(tid_tx, t, session_timer);
561         struct sta_info *sta = tid_tx->sta;
562         u8 tid = tid_tx->tid;
563         unsigned long timeout;
564
565         if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
566                 return;
567         }
568
569         timeout = tid_tx->last_tx + TU_TO_JIFFIES(tid_tx->timeout);
570         if (time_is_after_jiffies(timeout)) {
571                 mod_timer(&tid_tx->session_timer, timeout);
572                 return;
573         }
574
575         ht_dbg(sta->sdata, "tx session timer expired on %pM tid %d\n",
576                sta->sta.addr, tid);
577
578         ieee80211_stop_tx_ba_session(&sta->sta, tid);
579 }
580
581 int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
582                                   u16 timeout)
583 {
584         struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
585         struct ieee80211_sub_if_data *sdata = sta->sdata;
586         struct ieee80211_local *local = sdata->local;
587         struct tid_ampdu_tx *tid_tx;
588         int ret = 0;
589
590         trace_api_start_tx_ba_session(pubsta, tid);
591
592         if (WARN(sta->reserved_tid == tid,
593                  "Requested to start BA session on reserved tid=%d", tid))
594                 return -EINVAL;
595
596         if (!pubsta->ht_cap.ht_supported &&
597             sta->sdata->vif.bss_conf.chandef.chan->band != NL80211_BAND_6GHZ)
598                 return -EINVAL;
599
600         if (WARN_ON_ONCE(!local->ops->ampdu_action))
601                 return -EINVAL;
602
603         if ((tid >= IEEE80211_NUM_TIDS) ||
604             !ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION) ||
605             ieee80211_hw_check(&local->hw, TX_AMPDU_SETUP_IN_HW))
606                 return -EINVAL;
607
608         if (WARN_ON(tid >= IEEE80211_FIRST_TSPEC_TSID))
609                 return -EINVAL;
610
611         ht_dbg(sdata, "Open BA session requested for %pM tid %u\n",
612                pubsta->addr, tid);
613
614         if (sdata->vif.type != NL80211_IFTYPE_STATION &&
615             sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
616             sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
617             sdata->vif.type != NL80211_IFTYPE_AP &&
618             sdata->vif.type != NL80211_IFTYPE_ADHOC)
619                 return -EINVAL;
620
621         if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
622                 ht_dbg(sdata,
623                        "BA sessions blocked - Denying BA session request %pM tid %d\n",
624                        sta->sta.addr, tid);
625                 return -EINVAL;
626         }
627
628         /*
629          * 802.11n-2009 11.5.1.1: If the initiating STA is an HT STA, is a
630          * member of an IBSS, and has no other existing Block Ack agreement
631          * with the recipient STA, then the initiating STA shall transmit a
632          * Probe Request frame to the recipient STA and shall not transmit an
633          * ADDBA Request frame unless it receives a Probe Response frame
634          * from the recipient within dot11ADDBAFailureTimeout.
635          *
636          * The probe request mechanism for ADDBA is currently not implemented,
637          * but we only build up Block Ack session with HT STAs. This information
638          * is set when we receive a bss info from a probe response or a beacon.
639          */
640         if (sta->sdata->vif.type == NL80211_IFTYPE_ADHOC &&
641             !sta->sta.ht_cap.ht_supported) {
642                 ht_dbg(sdata,
643                        "BA request denied - IBSS STA %pM does not advertise HT support\n",
644                        pubsta->addr);
645                 return -EINVAL;
646         }
647
648         spin_lock_bh(&sta->lock);
649
650         /* we have tried too many times, receiver does not want A-MPDU */
651         if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) {
652                 ret = -EBUSY;
653                 goto err_unlock_sta;
654         }
655
656         /*
657          * if we have tried more than HT_AGG_BURST_RETRIES times we
658          * will spread our requests in time to avoid stalling connection
659          * for too long
660          */
661         if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_BURST_RETRIES &&
662             time_before(jiffies, sta->ampdu_mlme.last_addba_req_time[tid] +
663                         HT_AGG_RETRIES_PERIOD)) {
664                 ht_dbg(sdata,
665                        "BA request denied - %d failed requests on %pM tid %u\n",
666                        sta->ampdu_mlme.addba_req_num[tid], sta->sta.addr, tid);
667                 ret = -EBUSY;
668                 goto err_unlock_sta;
669         }
670
671         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
672         /* check if the TID is not in aggregation flow already */
673         if (tid_tx || sta->ampdu_mlme.tid_start_tx[tid]) {
674                 ht_dbg(sdata,
675                        "BA request denied - session is not idle on %pM tid %u\n",
676                        sta->sta.addr, tid);
677                 ret = -EAGAIN;
678                 goto err_unlock_sta;
679         }
680
681         /* prepare A-MPDU MLME for Tx aggregation */
682         tid_tx = kzalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC);
683         if (!tid_tx) {
684                 ret = -ENOMEM;
685                 goto err_unlock_sta;
686         }
687
688         skb_queue_head_init(&tid_tx->pending);
689         __set_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
690
691         tid_tx->timeout = timeout;
692         tid_tx->sta = sta;
693         tid_tx->tid = tid;
694
695         /* response timer */
696         timer_setup(&tid_tx->addba_resp_timer, sta_addba_resp_timer_expired, 0);
697
698         /* tx timer */
699         timer_setup(&tid_tx->session_timer,
700                     sta_tx_agg_session_timer_expired, TIMER_DEFERRABLE);
701
702         /* assign a dialog token */
703         sta->ampdu_mlme.dialog_token_allocator++;
704         tid_tx->dialog_token = sta->ampdu_mlme.dialog_token_allocator;
705
706         /*
707          * Finally, assign it to the start array; the work item will
708          * collect it and move it to the normal array.
709          */
710         sta->ampdu_mlme.tid_start_tx[tid] = tid_tx;
711
712         ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
713
714         /* this flow continues off the work */
715  err_unlock_sta:
716         spin_unlock_bh(&sta->lock);
717         return ret;
718 }
719 EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
720
721 static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
722                                          struct sta_info *sta, u16 tid)
723 {
724         struct tid_ampdu_tx *tid_tx;
725         struct ieee80211_ampdu_params params = {
726                 .sta = &sta->sta,
727                 .action = IEEE80211_AMPDU_TX_OPERATIONAL,
728                 .tid = tid,
729                 .timeout = 0,
730                 .ssn = 0,
731         };
732
733         lockdep_assert_held(&sta->ampdu_mlme.mtx);
734
735         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
736         params.buf_size = tid_tx->buf_size;
737         params.amsdu = tid_tx->amsdu;
738
739         ht_dbg(sta->sdata, "Aggregation is on for %pM tid %d\n",
740                sta->sta.addr, tid);
741
742         drv_ampdu_action(local, sta->sdata, &params);
743
744         /*
745          * synchronize with TX path, while splicing the TX path
746          * should block so it won't put more packets onto pending.
747          */
748         spin_lock_bh(&sta->lock);
749
750         ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid);
751         /*
752          * Now mark as operational. This will be visible
753          * in the TX path, and lets it go lock-free in
754          * the common case.
755          */
756         set_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
757         ieee80211_agg_splice_finish(sta->sdata, tid);
758
759         spin_unlock_bh(&sta->lock);
760
761         ieee80211_agg_start_txq(sta, tid, true);
762 }
763
764 void ieee80211_start_tx_ba_cb(struct sta_info *sta, int tid,
765                               struct tid_ampdu_tx *tid_tx)
766 {
767         struct ieee80211_sub_if_data *sdata = sta->sdata;
768         struct ieee80211_local *local = sdata->local;
769
770         if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state)))
771                 return;
772
773         if (!test_bit(HT_AGG_STATE_SENT_ADDBA, &tid_tx->state)) {
774                 ieee80211_send_addba_with_timeout(sta, tid_tx);
775                 /* RESPONSE_RECEIVED state whould trigger the flow again */
776                 return;
777         }
778
779         if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state))
780                 ieee80211_agg_tx_operational(local, sta, tid);
781 }
782
783 static struct tid_ampdu_tx *
784 ieee80211_lookup_tid_tx(struct ieee80211_sub_if_data *sdata,
785                         const u8 *ra, u16 tid, struct sta_info **sta)
786 {
787         struct tid_ampdu_tx *tid_tx;
788
789         if (tid >= IEEE80211_NUM_TIDS) {
790                 ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n",
791                        tid, IEEE80211_NUM_TIDS);
792                 return NULL;
793         }
794
795         *sta = sta_info_get_bss(sdata, ra);
796         if (!*sta) {
797                 ht_dbg(sdata, "Could not find station: %pM\n", ra);
798                 return NULL;
799         }
800
801         tid_tx = rcu_dereference((*sta)->ampdu_mlme.tid_tx[tid]);
802
803         if (WARN_ON(!tid_tx))
804                 ht_dbg(sdata, "addBA was not requested!\n");
805
806         return tid_tx;
807 }
808
809 void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
810                                       const u8 *ra, u16 tid)
811 {
812         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
813         struct ieee80211_local *local = sdata->local;
814         struct sta_info *sta;
815         struct tid_ampdu_tx *tid_tx;
816
817         trace_api_start_tx_ba_cb(sdata, ra, tid);
818
819         rcu_read_lock();
820         tid_tx = ieee80211_lookup_tid_tx(sdata, ra, tid, &sta);
821         if (!tid_tx)
822                 goto out;
823
824         set_bit(HT_AGG_STATE_START_CB, &tid_tx->state);
825         ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
826  out:
827         rcu_read_unlock();
828 }
829 EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe);
830
831 int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
832                                    enum ieee80211_agg_stop_reason reason)
833 {
834         int ret;
835
836         mutex_lock(&sta->ampdu_mlme.mtx);
837
838         ret = ___ieee80211_stop_tx_ba_session(sta, tid, reason);
839
840         mutex_unlock(&sta->ampdu_mlme.mtx);
841
842         return ret;
843 }
844
845 int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid)
846 {
847         struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
848         struct ieee80211_sub_if_data *sdata = sta->sdata;
849         struct ieee80211_local *local = sdata->local;
850         struct tid_ampdu_tx *tid_tx;
851         int ret = 0;
852
853         trace_api_stop_tx_ba_session(pubsta, tid);
854
855         if (!local->ops->ampdu_action)
856                 return -EINVAL;
857
858         if (tid >= IEEE80211_NUM_TIDS)
859                 return -EINVAL;
860
861         spin_lock_bh(&sta->lock);
862         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
863
864         if (!tid_tx) {
865                 ret = -ENOENT;
866                 goto unlock;
867         }
868
869         WARN(sta->reserved_tid == tid,
870              "Requested to stop BA session on reserved tid=%d", tid);
871
872         if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
873                 /* already in progress stopping it */
874                 ret = 0;
875                 goto unlock;
876         }
877
878         set_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state);
879         ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
880
881  unlock:
882         spin_unlock_bh(&sta->lock);
883         return ret;
884 }
885 EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
886
887 void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid,
888                              struct tid_ampdu_tx *tid_tx)
889 {
890         struct ieee80211_sub_if_data *sdata = sta->sdata;
891         bool send_delba = false;
892
893         ht_dbg(sdata, "Stopping Tx BA session for %pM tid %d\n",
894                sta->sta.addr, tid);
895
896         spin_lock_bh(&sta->lock);
897
898         if (!test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
899                 ht_dbg(sdata,
900                        "unexpected callback to A-MPDU stop for %pM tid %d\n",
901                        sta->sta.addr, tid);
902                 goto unlock_sta;
903         }
904
905         if (tid_tx->stop_initiator == WLAN_BACK_INITIATOR && tid_tx->tx_stop)
906                 send_delba = true;
907
908         ieee80211_remove_tid_tx(sta, tid);
909
910  unlock_sta:
911         spin_unlock_bh(&sta->lock);
912
913         if (send_delba)
914                 ieee80211_send_delba(sdata, sta->sta.addr, tid,
915                         WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
916 }
917
918 void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
919                                      const u8 *ra, u16 tid)
920 {
921         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
922         struct ieee80211_local *local = sdata->local;
923         struct sta_info *sta;
924         struct tid_ampdu_tx *tid_tx;
925
926         trace_api_stop_tx_ba_cb(sdata, ra, tid);
927
928         rcu_read_lock();
929         tid_tx = ieee80211_lookup_tid_tx(sdata, ra, tid, &sta);
930         if (!tid_tx)
931                 goto out;
932
933         set_bit(HT_AGG_STATE_STOP_CB, &tid_tx->state);
934         ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
935  out:
936         rcu_read_unlock();
937 }
938 EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe);
939
940
941 void ieee80211_process_addba_resp(struct ieee80211_local *local,
942                                   struct sta_info *sta,
943                                   struct ieee80211_mgmt *mgmt,
944                                   size_t len)
945 {
946         struct tid_ampdu_tx *tid_tx;
947         struct ieee80211_txq *txq;
948         u16 capab, tid, buf_size;
949         bool amsdu;
950
951         capab = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
952         amsdu = capab & IEEE80211_ADDBA_PARAM_AMSDU_MASK;
953         tid = u16_get_bits(capab, IEEE80211_ADDBA_PARAM_TID_MASK);
954         buf_size = u16_get_bits(capab, IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK);
955         buf_size = min(buf_size, local->hw.max_tx_aggregation_subframes);
956
957         txq = sta->sta.txq[tid];
958         if (!amsdu && txq)
959                 set_bit(IEEE80211_TXQ_NO_AMSDU, &to_txq_info(txq)->flags);
960
961         mutex_lock(&sta->ampdu_mlme.mtx);
962
963         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
964         if (!tid_tx)
965                 goto out;
966
967         if (mgmt->u.action.u.addba_resp.dialog_token != tid_tx->dialog_token) {
968                 ht_dbg(sta->sdata, "wrong addBA response token, %pM tid %d\n",
969                        sta->sta.addr, tid);
970                 goto out;
971         }
972
973         del_timer_sync(&tid_tx->addba_resp_timer);
974
975         ht_dbg(sta->sdata, "switched off addBA timer for %pM tid %d\n",
976                sta->sta.addr, tid);
977
978         /*
979          * addba_resp_timer may have fired before we got here, and
980          * caused WANT_STOP to be set. If the stop then was already
981          * processed further, STOPPING might be set.
982          */
983         if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) ||
984             test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
985                 ht_dbg(sta->sdata,
986                        "got addBA resp for %pM tid %d but we already gave up\n",
987                        sta->sta.addr, tid);
988                 goto out;
989         }
990
991         /*
992          * IEEE 802.11-2007 7.3.1.14:
993          * In an ADDBA Response frame, when the Status Code field
994          * is set to 0, the Buffer Size subfield is set to a value
995          * of at least 1.
996          */
997         if (le16_to_cpu(mgmt->u.action.u.addba_resp.status)
998                         == WLAN_STATUS_SUCCESS && buf_size) {
999                 if (test_and_set_bit(HT_AGG_STATE_RESPONSE_RECEIVED,
1000                                      &tid_tx->state)) {
1001                         /* ignore duplicate response */
1002                         goto out;
1003                 }
1004
1005                 tid_tx->buf_size = buf_size;
1006                 tid_tx->amsdu = amsdu;
1007
1008                 if (test_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state))
1009                         ieee80211_agg_tx_operational(local, sta, tid);
1010
1011                 sta->ampdu_mlme.addba_req_num[tid] = 0;
1012
1013                 tid_tx->timeout =
1014                         le16_to_cpu(mgmt->u.action.u.addba_resp.timeout);
1015
1016                 if (tid_tx->timeout) {
1017                         mod_timer(&tid_tx->session_timer,
1018                                   TU_TO_EXP_TIME(tid_tx->timeout));
1019                         tid_tx->last_tx = jiffies;
1020                 }
1021
1022         } else {
1023                 ___ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_DECLINED);
1024         }
1025
1026  out:
1027         mutex_unlock(&sta->ampdu_mlme.mtx);
1028 }