Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
[linux-2.6-microblaze.git] / kernel / power / suspend_test.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * kernel/power/suspend_test.c - Suspend to RAM and standby test facility.
4  *
5  * Copyright (c) 2009 Pavel Machek <pavel@ucw.cz>
6  */
7
8 #include <linux/init.h>
9 #include <linux/rtc.h>
10
11 #include "power.h"
12
13 /*
14  * We test the system suspend code by setting an RTC wakealarm a short
15  * time in the future, then suspending.  Suspending the devices won't
16  * normally take long ... some systems only need a few milliseconds.
17  *
18  * The time it takes is system-specific though, so when we test this
19  * during system bootup we allow a LOT of time.
20  */
21 #define TEST_SUSPEND_SECONDS    10
22
23 static unsigned long suspend_test_start_time;
24 static u32 test_repeat_count_max = 1;
25 static u32 test_repeat_count_current;
26
27 void suspend_test_start(void)
28 {
29         /* FIXME Use better timebase than "jiffies", ideally a clocksource.
30          * What we want is a hardware counter that will work correctly even
31          * during the irqs-are-off stages of the suspend/resume cycle...
32          */
33         suspend_test_start_time = jiffies;
34 }
35
36 void suspend_test_finish(const char *label)
37 {
38         long nj = jiffies - suspend_test_start_time;
39         unsigned msec;
40
41         msec = jiffies_to_msecs(abs(nj));
42         pr_info("PM: %s took %d.%03d seconds\n", label,
43                         msec / 1000, msec % 1000);
44
45         /* Warning on suspend means the RTC alarm period needs to be
46          * larger -- the system was sooo slooowwww to suspend that the
47          * alarm (should have) fired before the system went to sleep!
48          *
49          * Warning on either suspend or resume also means the system
50          * has some performance issues.  The stack dump of a WARN_ON
51          * is more likely to get the right attention than a printk...
52          */
53         WARN(msec > (TEST_SUSPEND_SECONDS * 1000),
54              "Component: %s, time: %u\n", label, msec);
55 }
56
57 /*
58  * To test system suspend, we need a hands-off mechanism to resume the
59  * system.  RTCs wake alarms are a common self-contained mechanism.
60  */
61
62 static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
63 {
64         static char err_readtime[] __initdata =
65                 KERN_ERR "PM: can't read %s time, err %d\n";
66         static char err_wakealarm [] __initdata =
67                 KERN_ERR "PM: can't set %s wakealarm, err %d\n";
68         static char err_suspend[] __initdata =
69                 KERN_ERR "PM: suspend test failed, error %d\n";
70         static char info_test[] __initdata =
71                 KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
72
73         time64_t                now;
74         struct rtc_wkalrm       alm;
75         int                     status;
76
77         /* this may fail if the RTC hasn't been initialized */
78 repeat:
79         status = rtc_read_time(rtc, &alm.time);
80         if (status < 0) {
81                 printk(err_readtime, dev_name(&rtc->dev), status);
82                 return;
83         }
84         now = rtc_tm_to_time64(&alm.time);
85
86         memset(&alm, 0, sizeof alm);
87         rtc_time64_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
88         alm.enabled = true;
89
90         status = rtc_set_alarm(rtc, &alm);
91         if (status < 0) {
92                 printk(err_wakealarm, dev_name(&rtc->dev), status);
93                 return;
94         }
95
96         if (state == PM_SUSPEND_MEM) {
97                 printk(info_test, pm_states[state]);
98                 status = pm_suspend(state);
99                 if (status == -ENODEV)
100                         state = PM_SUSPEND_STANDBY;
101         }
102         if (state == PM_SUSPEND_STANDBY) {
103                 printk(info_test, pm_states[state]);
104                 status = pm_suspend(state);
105                 if (status < 0)
106                         state = PM_SUSPEND_TO_IDLE;
107         }
108         if (state == PM_SUSPEND_TO_IDLE) {
109                 printk(info_test, pm_states[state]);
110                 status = pm_suspend(state);
111         }
112
113         if (status < 0)
114                 printk(err_suspend, status);
115
116         test_repeat_count_current++;
117         if (test_repeat_count_current < test_repeat_count_max)
118                 goto repeat;
119
120         /* Some platforms can't detect that the alarm triggered the
121          * wakeup, or (accordingly) disable it after it afterwards.
122          * It's supposed to give oneshot behavior; cope.
123          */
124         alm.enabled = false;
125         rtc_set_alarm(rtc, &alm);
126 }
127
128 static int __init has_wakealarm(struct device *dev, const void *data)
129 {
130         struct rtc_device *candidate = to_rtc_device(dev);
131
132         if (!candidate->ops->set_alarm)
133                 return 0;
134         if (!device_may_wakeup(candidate->dev.parent))
135                 return 0;
136
137         return 1;
138 }
139
140 /*
141  * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
142  * at startup time.  They're normally disabled, for faster boot and because
143  * we can't know which states really work on this particular system.
144  */
145 static const char *test_state_label __initdata;
146
147 static char warn_bad_state[] __initdata =
148         KERN_WARNING "PM: can't test '%s' suspend state\n";
149
150 static int __init setup_test_suspend(char *value)
151 {
152         int i;
153         char *repeat;
154         char *suspend_type;
155
156         /* example : "=mem[,N]" ==> "mem[,N]" */
157         value++;
158         suspend_type = strsep(&value, ",");
159         if (!suspend_type)
160                 return 0;
161
162         repeat = strsep(&value, ",");
163         if (repeat) {
164                 if (kstrtou32(repeat, 0, &test_repeat_count_max))
165                         return 0;
166         }
167
168         for (i = PM_SUSPEND_MIN; i < PM_SUSPEND_MAX; i++)
169                 if (!strcmp(pm_labels[i], suspend_type)) {
170                         test_state_label = pm_labels[i];
171                         return 0;
172                 }
173
174         printk(warn_bad_state, suspend_type);
175         return 0;
176 }
177 __setup("test_suspend", setup_test_suspend);
178
179 static int __init test_suspend(void)
180 {
181         static char             warn_no_rtc[] __initdata =
182                 KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
183
184         struct rtc_device       *rtc = NULL;
185         struct device           *dev;
186         suspend_state_t test_state;
187
188         /* PM is initialized by now; is that state testable? */
189         if (!test_state_label)
190                 return 0;
191
192         for (test_state = PM_SUSPEND_MIN; test_state < PM_SUSPEND_MAX; test_state++) {
193                 const char *state_label = pm_states[test_state];
194
195                 if (state_label && !strcmp(test_state_label, state_label))
196                         break;
197         }
198         if (test_state == PM_SUSPEND_MAX) {
199                 printk(warn_bad_state, test_state_label);
200                 return 0;
201         }
202
203         /* RTCs have initialized by now too ... can we use one? */
204         dev = class_find_device(rtc_class, NULL, NULL, has_wakealarm);
205         if (dev) {
206                 rtc = rtc_class_open(dev_name(dev));
207                 put_device(dev);
208         }
209         if (!rtc) {
210                 printk(warn_no_rtc);
211                 return 0;
212         }
213
214         /* go for it */
215         test_wakealarm(rtc, test_state);
216         rtc_class_close(rtc);
217         return 0;
218 }
219 late_initcall(test_suspend);