arm64: mte: change ASYNC and SYNC TCF settings into bitfields
[linux-2.6-microblaze.git] / include / uapi / linux / taskstats.h
1 /* SPDX-License-Identifier: LGPL-2.1 WITH Linux-syscall-note */
2 /* taskstats.h - exporting per-task statistics
3  *
4  * Copyright (C) Shailabh Nagar, IBM Corp. 2006
5  *           (C) Balbir Singh,   IBM Corp. 2006
6  *           (C) Jay Lan,        SGI, 2006
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms of version 2.1 of the GNU Lesser General Public License
10  * as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it would be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
15  */
16
17 #ifndef _LINUX_TASKSTATS_H
18 #define _LINUX_TASKSTATS_H
19
20 #include <linux/types.h>
21
22 /* Format for per-task data returned to userland when
23  *      - a task exits
24  *      - listener requests stats for a task
25  *
26  * The struct is versioned. Newer versions should only add fields to
27  * the bottom of the struct to maintain backward compatibility.
28  *
29  *
30  * To add new fields
31  *      a) bump up TASKSTATS_VERSION
32  *      b) add comment indicating new version number at end of struct
33  *      c) add new fields after version comment; maintain 64-bit alignment
34  */
35
36
37 #define TASKSTATS_VERSION       10
38 #define TS_COMM_LEN             32      /* should be >= TASK_COMM_LEN
39                                          * in linux/sched.h */
40
41 struct taskstats {
42
43         /* The version number of this struct. This field is always set to
44          * TAKSTATS_VERSION, which is defined in <linux/taskstats.h>.
45          * Each time the struct is changed, the value should be incremented.
46          */
47         __u16   version;
48         __u32   ac_exitcode;            /* Exit status */
49
50         /* The accounting flags of a task as defined in <linux/acct.h>
51          * Defined values are AFORK, ASU, ACOMPAT, ACORE, and AXSIG.
52          */
53         __u8    ac_flag;                /* Record flags */
54         __u8    ac_nice;                /* task_nice */
55
56         /* Delay accounting fields start
57          *
58          * All values, until comment "Delay accounting fields end" are
59          * available only if delay accounting is enabled, even though the last
60          * few fields are not delays
61          *
62          * xxx_count is the number of delay values recorded
63          * xxx_delay_total is the corresponding cumulative delay in nanoseconds
64          *
65          * xxx_delay_total wraps around to zero on overflow
66          * xxx_count incremented regardless of overflow
67          */
68
69         /* Delay waiting for cpu, while runnable
70          * count, delay_total NOT updated atomically
71          */
72         __u64   cpu_count __attribute__((aligned(8)));
73         __u64   cpu_delay_total;
74
75         /* Following four fields atomically updated using task->delays->lock */
76
77         /* Delay waiting for synchronous block I/O to complete
78          * does not account for delays in I/O submission
79          */
80         __u64   blkio_count;
81         __u64   blkio_delay_total;
82
83         /* Delay waiting for page fault I/O (swap in only) */
84         __u64   swapin_count;
85         __u64   swapin_delay_total;
86
87         /* cpu "wall-clock" running time
88          * On some architectures, value will adjust for cpu time stolen
89          * from the kernel in involuntary waits due to virtualization.
90          * Value is cumulative, in nanoseconds, without a corresponding count
91          * and wraps around to zero silently on overflow
92          */
93         __u64   cpu_run_real_total;
94
95         /* cpu "virtual" running time
96          * Uses time intervals seen by the kernel i.e. no adjustment
97          * for kernel's involuntary waits due to virtualization.
98          * Value is cumulative, in nanoseconds, without a corresponding count
99          * and wraps around to zero silently on overflow
100          */
101         __u64   cpu_run_virtual_total;
102         /* Delay accounting fields end */
103         /* version 1 ends here */
104
105         /* Basic Accounting Fields start */
106         char    ac_comm[TS_COMM_LEN];   /* Command name */
107         __u8    ac_sched __attribute__((aligned(8)));
108                                         /* Scheduling discipline */
109         __u8    ac_pad[3];
110         __u32   ac_uid __attribute__((aligned(8)));
111                                         /* User ID */
112         __u32   ac_gid;                 /* Group ID */
113         __u32   ac_pid;                 /* Process ID */
114         __u32   ac_ppid;                /* Parent process ID */
115         /* __u32 range means times from 1970 to 2106 */
116         __u32   ac_btime;               /* Begin time [sec since 1970] */
117         __u64   ac_etime __attribute__((aligned(8)));
118                                         /* Elapsed time [usec] */
119         __u64   ac_utime;               /* User CPU time [usec] */
120         __u64   ac_stime;               /* SYstem CPU time [usec] */
121         __u64   ac_minflt;              /* Minor Page Fault Count */
122         __u64   ac_majflt;              /* Major Page Fault Count */
123         /* Basic Accounting Fields end */
124
125         /* Extended accounting fields start */
126         /* Accumulated RSS usage in duration of a task, in MBytes-usecs.
127          * The current rss usage is added to this counter every time
128          * a tick is charged to a task's system time. So, at the end we
129          * will have memory usage multiplied by system time. Thus an
130          * average usage per system time unit can be calculated.
131          */
132         __u64   coremem;                /* accumulated RSS usage in MB-usec */
133         /* Accumulated virtual memory usage in duration of a task.
134          * Same as acct_rss_mem1 above except that we keep track of VM usage.
135          */
136         __u64   virtmem;                /* accumulated VM  usage in MB-usec */
137
138         /* High watermark of RSS and virtual memory usage in duration of
139          * a task, in KBytes.
140          */
141         __u64   hiwater_rss;            /* High-watermark of RSS usage, in KB */
142         __u64   hiwater_vm;             /* High-water VM usage, in KB */
143
144         /* The following four fields are I/O statistics of a task. */
145         __u64   read_char;              /* bytes read */
146         __u64   write_char;             /* bytes written */
147         __u64   read_syscalls;          /* read syscalls */
148         __u64   write_syscalls;         /* write syscalls */
149         /* Extended accounting fields end */
150
151 #define TASKSTATS_HAS_IO_ACCOUNTING
152         /* Per-task storage I/O accounting starts */
153         __u64   read_bytes;             /* bytes of read I/O */
154         __u64   write_bytes;            /* bytes of write I/O */
155         __u64   cancelled_write_bytes;  /* bytes of cancelled write I/O */
156
157         __u64  nvcsw;                   /* voluntary_ctxt_switches */
158         __u64  nivcsw;                  /* nonvoluntary_ctxt_switches */
159
160         /* time accounting for SMT machines */
161         __u64   ac_utimescaled;         /* utime scaled on frequency etc */
162         __u64   ac_stimescaled;         /* stime scaled on frequency etc */
163         __u64   cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
164
165         /* Delay waiting for memory reclaim */
166         __u64   freepages_count;
167         __u64   freepages_delay_total;
168
169         /* Delay waiting for thrashing page */
170         __u64   thrashing_count;
171         __u64   thrashing_delay_total;
172
173         /* v10: 64-bit btime to avoid overflow */
174         __u64   ac_btime64;             /* 64-bit begin time */
175 };
176
177
178 /*
179  * Commands sent from userspace
180  * Not versioned. New commands should only be inserted at the enum's end
181  * prior to __TASKSTATS_CMD_MAX
182  */
183
184 enum {
185         TASKSTATS_CMD_UNSPEC = 0,       /* Reserved */
186         TASKSTATS_CMD_GET,              /* user->kernel request/get-response */
187         TASKSTATS_CMD_NEW,              /* kernel->user event */
188         __TASKSTATS_CMD_MAX,
189 };
190
191 #define TASKSTATS_CMD_MAX (__TASKSTATS_CMD_MAX - 1)
192
193 enum {
194         TASKSTATS_TYPE_UNSPEC = 0,      /* Reserved */
195         TASKSTATS_TYPE_PID,             /* Process id */
196         TASKSTATS_TYPE_TGID,            /* Thread group id */
197         TASKSTATS_TYPE_STATS,           /* taskstats structure */
198         TASKSTATS_TYPE_AGGR_PID,        /* contains pid + stats */
199         TASKSTATS_TYPE_AGGR_TGID,       /* contains tgid + stats */
200         TASKSTATS_TYPE_NULL,            /* contains nothing */
201         __TASKSTATS_TYPE_MAX,
202 };
203
204 #define TASKSTATS_TYPE_MAX (__TASKSTATS_TYPE_MAX - 1)
205
206 enum {
207         TASKSTATS_CMD_ATTR_UNSPEC = 0,
208         TASKSTATS_CMD_ATTR_PID,
209         TASKSTATS_CMD_ATTR_TGID,
210         TASKSTATS_CMD_ATTR_REGISTER_CPUMASK,
211         TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK,
212         __TASKSTATS_CMD_ATTR_MAX,
213 };
214
215 #define TASKSTATS_CMD_ATTR_MAX (__TASKSTATS_CMD_ATTR_MAX - 1)
216
217 /* NETLINK_GENERIC related info */
218
219 #define TASKSTATS_GENL_NAME     "TASKSTATS"
220 #define TASKSTATS_GENL_VERSION  0x1
221
222 #endif /* _LINUX_TASKSTATS_H */