Merge tag 'rproc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson...
[linux-2.6-microblaze.git] / include / scsi / scsi_device.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _SCSI_SCSI_DEVICE_H
3 #define _SCSI_SCSI_DEVICE_H
4
5 #include <linux/list.h>
6 #include <linux/spinlock.h>
7 #include <linux/workqueue.h>
8 #include <linux/blkdev.h>
9 #include <scsi/scsi.h>
10 #include <linux/atomic.h>
11 #include <linux/sbitmap.h>
12
13 struct bsg_device;
14 struct device;
15 struct request_queue;
16 struct scsi_cmnd;
17 struct scsi_lun;
18 struct scsi_sense_hdr;
19
20 typedef __u64 __bitwise blist_flags_t;
21
22 #define SCSI_SENSE_BUFFERSIZE   96
23
24 struct scsi_mode_data {
25         __u32   length;
26         __u16   block_descriptor_length;
27         __u8    medium_type;
28         __u8    device_specific;
29         __u8    header_length;
30         __u8    longlba:1;
31 };
32
33 /*
34  * sdev state: If you alter this, you also need to alter scsi_sysfs.c
35  * (for the ascii descriptions) and the state model enforcer:
36  * scsi_lib:scsi_device_set_state().
37  */
38 enum scsi_device_state {
39         SDEV_CREATED = 1,       /* device created but not added to sysfs
40                                  * Only internal commands allowed (for inq) */
41         SDEV_RUNNING,           /* device properly configured
42                                  * All commands allowed */
43         SDEV_CANCEL,            /* beginning to delete device
44                                  * Only error handler commands allowed */
45         SDEV_DEL,               /* device deleted 
46                                  * no commands allowed */
47         SDEV_QUIESCE,           /* Device quiescent.  No block commands
48                                  * will be accepted, only specials (which
49                                  * originate in the mid-layer) */
50         SDEV_OFFLINE,           /* Device offlined (by error handling or
51                                  * user request */
52         SDEV_TRANSPORT_OFFLINE, /* Offlined by transport class error handler */
53         SDEV_BLOCK,             /* Device blocked by scsi lld.  No
54                                  * scsi commands from user or midlayer
55                                  * should be issued to the scsi
56                                  * lld. */
57         SDEV_CREATED_BLOCK,     /* same as above but for created devices */
58 };
59
60 enum scsi_scan_mode {
61         SCSI_SCAN_INITIAL = 0,
62         SCSI_SCAN_RESCAN,
63         SCSI_SCAN_MANUAL,
64 };
65
66 enum scsi_device_event {
67         SDEV_EVT_MEDIA_CHANGE   = 1,    /* media has changed */
68         SDEV_EVT_INQUIRY_CHANGE_REPORTED,               /* 3F 03  UA reported */
69         SDEV_EVT_CAPACITY_CHANGE_REPORTED,              /* 2A 09  UA reported */
70         SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED,       /* 38 07  UA reported */
71         SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED,        /* 2A 01  UA reported */
72         SDEV_EVT_LUN_CHANGE_REPORTED,                   /* 3F 0E  UA reported */
73         SDEV_EVT_ALUA_STATE_CHANGE_REPORTED,            /* 2A 06  UA reported */
74         SDEV_EVT_POWER_ON_RESET_OCCURRED,               /* 29 00  UA reported */
75
76         SDEV_EVT_FIRST          = SDEV_EVT_MEDIA_CHANGE,
77         SDEV_EVT_LAST           = SDEV_EVT_POWER_ON_RESET_OCCURRED,
78
79         SDEV_EVT_MAXBITS        = SDEV_EVT_LAST + 1
80 };
81
82 struct scsi_event {
83         enum scsi_device_event  evt_type;
84         struct list_head        node;
85
86         /* put union of data structures, for non-simple event types,
87          * here
88          */
89 };
90
91 /**
92  * struct scsi_vpd - SCSI Vital Product Data
93  * @rcu: For kfree_rcu().
94  * @len: Length in bytes of @data.
95  * @data: VPD data as defined in various T10 SCSI standard documents.
96  */
97 struct scsi_vpd {
98         struct rcu_head rcu;
99         int             len;
100         unsigned char   data[];
101 };
102
103 struct scsi_device {
104         struct Scsi_Host *host;
105         struct request_queue *request_queue;
106
107         /* the next two are protected by the host->host_lock */
108         struct list_head    siblings;   /* list of all devices on this host */
109         struct list_head    same_target_siblings; /* just the devices sharing same target id */
110
111         struct sbitmap budget_map;
112         atomic_t device_blocked;        /* Device returned QUEUE_FULL. */
113
114         atomic_t restarts;
115         spinlock_t list_lock;
116         struct list_head starved_entry;
117         unsigned short queue_depth;     /* How deep of a queue we want */
118         unsigned short max_queue_depth; /* max queue depth */
119         unsigned short last_queue_full_depth; /* These two are used by */
120         unsigned short last_queue_full_count; /* scsi_track_queue_full() */
121         unsigned long last_queue_full_time;     /* last queue full time */
122         unsigned long queue_ramp_up_period;     /* ramp up period in jiffies */
123 #define SCSI_DEFAULT_RAMP_UP_PERIOD     (120 * HZ)
124
125         unsigned long last_queue_ramp_up;       /* last queue ramp up time */
126
127         unsigned int id, channel;
128         u64 lun;
129         unsigned int manufacturer;      /* Manufacturer of device, for using 
130                                          * vendor-specific cmd's */
131         unsigned sector_size;   /* size in bytes */
132
133         void *hostdata;         /* available to low-level driver */
134         unsigned char type;
135         char scsi_level;
136         char inq_periph_qual;   /* PQ from INQUIRY data */      
137         struct mutex inquiry_mutex;
138         unsigned char inquiry_len;      /* valid bytes in 'inquiry' */
139         unsigned char * inquiry;        /* INQUIRY response data */
140         const char * vendor;            /* [back_compat] point into 'inquiry' ... */
141         const char * model;             /* ... after scan; point to static string */
142         const char * rev;               /* ... "nullnullnullnull" before scan */
143
144 #define SCSI_VPD_PG_LEN                255
145         struct scsi_vpd __rcu *vpd_pg0;
146         struct scsi_vpd __rcu *vpd_pg83;
147         struct scsi_vpd __rcu *vpd_pg80;
148         struct scsi_vpd __rcu *vpd_pg89;
149         unsigned char current_tag;      /* current tag */
150         struct scsi_target      *sdev_target;
151
152         blist_flags_t           sdev_bflags; /* black/white flags as also found in
153                                  * scsi_devinfo.[hc]. For now used only to
154                                  * pass settings from slave_alloc to scsi
155                                  * core. */
156         unsigned int eh_timeout; /* Error handling timeout */
157         unsigned removable:1;
158         unsigned changed:1;     /* Data invalid due to media change */
159         unsigned busy:1;        /* Used to prevent races */
160         unsigned lockable:1;    /* Able to prevent media removal */
161         unsigned locked:1;      /* Media removal disabled */
162         unsigned borken:1;      /* Tell the Seagate driver to be 
163                                  * painfully slow on this device */
164         unsigned disconnect:1;  /* can disconnect */
165         unsigned soft_reset:1;  /* Uses soft reset option */
166         unsigned sdtr:1;        /* Device supports SDTR messages */
167         unsigned wdtr:1;        /* Device supports WDTR messages */
168         unsigned ppr:1;         /* Device supports PPR messages */
169         unsigned tagged_supported:1;    /* Supports SCSI-II tagged queuing */
170         unsigned simple_tags:1; /* simple queue tag messages are enabled */
171         unsigned was_reset:1;   /* There was a bus reset on the bus for 
172                                  * this device */
173         unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
174                                      * because we did a bus reset. */
175         unsigned use_10_for_rw:1; /* first try 10-byte read / write */
176         unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
177         unsigned set_dbd_for_ms:1; /* Set "DBD" field in mode sense */
178         unsigned no_report_opcodes:1;   /* no REPORT SUPPORTED OPERATION CODES */
179         unsigned no_write_same:1;       /* no WRITE SAME command */
180         unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
181         unsigned skip_ms_page_8:1;      /* do not use MODE SENSE page 0x08 */
182         unsigned skip_ms_page_3f:1;     /* do not use MODE SENSE page 0x3f */
183         unsigned skip_vpd_pages:1;      /* do not read VPD pages */
184         unsigned try_vpd_pages:1;       /* attempt to read VPD pages */
185         unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
186         unsigned no_start_on_add:1;     /* do not issue start on add */
187         unsigned allow_restart:1; /* issue START_UNIT in error handler */
188         unsigned manage_start_stop:1;   /* Let HLD (sd) manage start/stop */
189         unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
190         unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
191         unsigned select_no_atn:1;
192         unsigned fix_capacity:1;        /* READ_CAPACITY is too high by 1 */
193         unsigned guess_capacity:1;      /* READ_CAPACITY might be too high by 1 */
194         unsigned retry_hwerror:1;       /* Retry HARDWARE_ERROR */
195         unsigned last_sector_bug:1;     /* do not use multisector accesses on
196                                            SD_LAST_BUGGY_SECTORS */
197         unsigned no_read_disc_info:1;   /* Avoid READ_DISC_INFO cmds */
198         unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
199         unsigned try_rc_10_first:1;     /* Try READ_CAPACACITY_10 first */
200         unsigned security_supported:1;  /* Supports Security Protocols */
201         unsigned is_visible:1;  /* is the device visible in sysfs */
202         unsigned wce_default_on:1;      /* Cache is ON by default */
203         unsigned no_dif:1;      /* T10 PI (DIF) should be disabled */
204         unsigned broken_fua:1;          /* Don't set FUA bit */
205         unsigned lun_in_cdb:1;          /* Store LUN bits in CDB[1] */
206         unsigned unmap_limit_for_ws:1;  /* Use the UNMAP limit for WRITE SAME */
207         unsigned rpm_autosuspend:1;     /* Enable runtime autosuspend at device
208                                          * creation time */
209         unsigned ignore_media_change:1; /* Ignore MEDIA CHANGE on resume */
210
211         bool offline_already;           /* Device offline message logged */
212
213         atomic_t disk_events_disable_depth; /* disable depth for disk events */
214
215         DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
216         DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */
217         struct list_head event_list;    /* asserted events */
218         struct work_struct event_work;
219
220         unsigned int max_device_blocked; /* what device_blocked counts down from  */
221 #define SCSI_DEFAULT_DEVICE_BLOCKED     3
222
223         atomic_t iorequest_cnt;
224         atomic_t iodone_cnt;
225         atomic_t ioerr_cnt;
226
227         struct device           sdev_gendev,
228                                 sdev_dev;
229
230         struct execute_work     ew; /* used to get process context on put */
231         struct work_struct      requeue_work;
232
233         struct scsi_device_handler *handler;
234         void                    *handler_data;
235
236         size_t                  dma_drain_len;
237         void                    *dma_drain_buf;
238
239         unsigned int            sg_timeout;
240         unsigned int            sg_reserved_size;
241
242         struct bsg_device       *bsg_dev;
243         unsigned char           access_state;
244         struct mutex            state_mutex;
245         enum scsi_device_state sdev_state;
246         struct task_struct      *quiesced_by;
247         unsigned long           sdev_data[];
248 } __attribute__((aligned(sizeof(unsigned long))));
249
250 #define to_scsi_device(d)       \
251         container_of(d, struct scsi_device, sdev_gendev)
252 #define class_to_sdev(d)        \
253         container_of(d, struct scsi_device, sdev_dev)
254 #define transport_class_to_sdev(class_dev) \
255         to_scsi_device(class_dev->parent)
256
257 #define sdev_dbg(sdev, fmt, a...) \
258         dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
259
260 /*
261  * like scmd_printk, but the device name is passed in
262  * as a string pointer
263  */
264 __printf(4, 5) void
265 sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
266                 const char *, ...);
267
268 #define sdev_printk(l, sdev, fmt, a...)                         \
269         sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
270
271 __printf(3, 4) void
272 scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
273
274 #define scmd_dbg(scmd, fmt, a...)                                       \
275         do {                                                            \
276                 struct request *__rq = scsi_cmd_to_rq((scmd));          \
277                                                                         \
278                 if (__rq->rq_disk)                                      \
279                         sdev_dbg((scmd)->device, "[%s] " fmt,           \
280                                  __rq->rq_disk->disk_name, ##a);        \
281                 else                                                    \
282                         sdev_dbg((scmd)->device, fmt, ##a);             \
283         } while (0)
284
285 enum scsi_target_state {
286         STARGET_CREATED = 1,
287         STARGET_RUNNING,
288         STARGET_REMOVE,
289         STARGET_CREATED_REMOVE,
290         STARGET_DEL,
291 };
292
293 /*
294  * scsi_target: representation of a scsi target, for now, this is only
295  * used for single_lun devices. If no one has active IO to the target,
296  * starget_sdev_user is NULL, else it points to the active sdev.
297  */
298 struct scsi_target {
299         struct scsi_device      *starget_sdev_user;
300         struct list_head        siblings;
301         struct list_head        devices;
302         struct device           dev;
303         struct kref             reap_ref; /* last put renders target invisible */
304         unsigned int            channel;
305         unsigned int            id; /* target id ... replace
306                                      * scsi_device.id eventually */
307         unsigned int            create:1; /* signal that it needs to be added */
308         unsigned int            single_lun:1;   /* Indicates we should only
309                                                  * allow I/O to one of the luns
310                                                  * for the device at a time. */
311         unsigned int            pdt_1f_for_no_lun:1;    /* PDT = 0x1f
312                                                  * means no lun present. */
313         unsigned int            no_report_luns:1;       /* Don't use
314                                                  * REPORT LUNS for scanning. */
315         unsigned int            expecting_lun_change:1; /* A device has reported
316                                                  * a 3F/0E UA, other devices on
317                                                  * the same target will also. */
318         /* commands actually active on LLD. */
319         atomic_t                target_busy;
320         atomic_t                target_blocked;
321
322         /*
323          * LLDs should set this in the slave_alloc host template callout.
324          * If set to zero then there is not limit.
325          */
326         unsigned int            can_queue;
327         unsigned int            max_target_blocked;
328 #define SCSI_DEFAULT_TARGET_BLOCKED     3
329
330         char                    scsi_level;
331         enum scsi_target_state  state;
332         void                    *hostdata; /* available to low-level driver */
333         unsigned long           starget_data[]; /* for the transport */
334         /* starget_data must be the last element!!!! */
335 } __attribute__((aligned(sizeof(unsigned long))));
336
337 #define to_scsi_target(d)       container_of(d, struct scsi_target, dev)
338 static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
339 {
340         return to_scsi_target(sdev->sdev_gendev.parent);
341 }
342 #define transport_class_to_starget(class_dev) \
343         to_scsi_target(class_dev->parent)
344
345 #define starget_printk(prefix, starget, fmt, a...)      \
346         dev_printk(prefix, &(starget)->dev, fmt, ##a)
347
348 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
349                 uint, uint, u64, void *hostdata);
350 extern int scsi_add_device(struct Scsi_Host *host, uint channel,
351                            uint target, u64 lun);
352 extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
353 extern void scsi_remove_device(struct scsi_device *);
354 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
355 void scsi_attach_vpd(struct scsi_device *sdev);
356
357 extern struct scsi_device *scsi_device_from_queue(struct request_queue *q);
358 extern int __must_check scsi_device_get(struct scsi_device *);
359 extern void scsi_device_put(struct scsi_device *);
360 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
361                                               uint, uint, u64);
362 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
363                                                 uint, uint, u64);
364 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
365                                                         u64);
366 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
367                                                           u64);
368 extern void starget_for_each_device(struct scsi_target *, void *,
369                      void (*fn)(struct scsi_device *, void *));
370 extern void __starget_for_each_device(struct scsi_target *, void *,
371                                       void (*fn)(struct scsi_device *,
372                                                  void *));
373
374 /* only exposed to implement shost_for_each_device */
375 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
376                                                   struct scsi_device *);
377
378 /**
379  * shost_for_each_device - iterate over all devices of a host
380  * @sdev: the &struct scsi_device to use as a cursor
381  * @shost: the &struct scsi_host to iterate over
382  *
383  * Iterator that returns each device attached to @shost.  This loop
384  * takes a reference on each device and releases it at the end.  If
385  * you break out of the loop, you must call scsi_device_put(sdev).
386  */
387 #define shost_for_each_device(sdev, shost) \
388         for ((sdev) = __scsi_iterate_devices((shost), NULL); \
389              (sdev); \
390              (sdev) = __scsi_iterate_devices((shost), (sdev)))
391
392 /**
393  * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
394  * @sdev: the &struct scsi_device to use as a cursor
395  * @shost: the &struct scsi_host to iterate over
396  *
397  * Iterator that returns each device attached to @shost.  It does _not_
398  * take a reference on the scsi_device, so the whole loop must be
399  * protected by shost->host_lock.
400  *
401  * Note: The only reason to use this is because you need to access the
402  * device list in interrupt context.  Otherwise you really want to use
403  * shost_for_each_device instead.
404  */
405 #define __shost_for_each_device(sdev, shost) \
406         list_for_each_entry((sdev), &((shost)->__devices), siblings)
407
408 extern int scsi_change_queue_depth(struct scsi_device *, int);
409 extern int scsi_track_queue_full(struct scsi_device *, int);
410
411 extern int scsi_set_medium_removal(struct scsi_device *, char);
412
413 extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
414                            unsigned char *buffer, int len, int timeout,
415                            int retries, struct scsi_mode_data *data,
416                            struct scsi_sense_hdr *);
417 extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
418                             int modepage, unsigned char *buffer, int len,
419                             int timeout, int retries,
420                             struct scsi_mode_data *data,
421                             struct scsi_sense_hdr *);
422 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
423                                 int retries, struct scsi_sense_hdr *sshdr);
424 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
425                              int buf_len);
426 extern int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
427                               unsigned int len, unsigned char opcode);
428 extern int scsi_device_set_state(struct scsi_device *sdev,
429                                  enum scsi_device_state state);
430 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
431                                           gfp_t gfpflags);
432 extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
433 extern void sdev_evt_send_simple(struct scsi_device *sdev,
434                           enum scsi_device_event evt_type, gfp_t gfpflags);
435 extern int scsi_device_quiesce(struct scsi_device *sdev);
436 extern void scsi_device_resume(struct scsi_device *sdev);
437 extern void scsi_target_quiesce(struct scsi_target *);
438 extern void scsi_target_resume(struct scsi_target *);
439 extern void scsi_scan_target(struct device *parent, unsigned int channel,
440                              unsigned int id, u64 lun,
441                              enum scsi_scan_mode rescan);
442 extern void scsi_target_reap(struct scsi_target *);
443 extern void scsi_target_block(struct device *);
444 extern void scsi_target_unblock(struct device *, enum scsi_device_state);
445 extern void scsi_remove_target(struct device *);
446 extern const char *scsi_device_state_name(enum scsi_device_state);
447 extern int scsi_is_sdev_device(const struct device *);
448 extern int scsi_is_target_device(const struct device *);
449 extern void scsi_sanitize_inquiry_string(unsigned char *s, int len);
450 extern int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
451                         int data_direction, void *buffer, unsigned bufflen,
452                         unsigned char *sense, struct scsi_sense_hdr *sshdr,
453                         int timeout, int retries, u64 flags,
454                         req_flags_t rq_flags, int *resid);
455 /* Make sure any sense buffer is the correct size. */
456 #define scsi_execute(sdev, cmd, data_direction, buffer, bufflen, sense, \
457                      sshdr, timeout, retries, flags, rq_flags, resid)   \
458 ({                                                                      \
459         BUILD_BUG_ON((sense) != NULL &&                                 \
460                      sizeof(sense) != SCSI_SENSE_BUFFERSIZE);           \
461         __scsi_execute(sdev, cmd, data_direction, buffer, bufflen,      \
462                        sense, sshdr, timeout, retries, flags, rq_flags, \
463                        resid);                                          \
464 })
465 static inline int scsi_execute_req(struct scsi_device *sdev,
466         const unsigned char *cmd, int data_direction, void *buffer,
467         unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
468         int retries, int *resid)
469 {
470         return scsi_execute(sdev, cmd, data_direction, buffer,
471                 bufflen, NULL, sshdr, timeout, retries,  0, 0, resid);
472 }
473 extern void sdev_disable_disk_events(struct scsi_device *sdev);
474 extern void sdev_enable_disk_events(struct scsi_device *sdev);
475 extern int scsi_vpd_lun_id(struct scsi_device *, char *, size_t);
476 extern int scsi_vpd_tpg_id(struct scsi_device *, int *);
477
478 #ifdef CONFIG_PM
479 extern int scsi_autopm_get_device(struct scsi_device *);
480 extern void scsi_autopm_put_device(struct scsi_device *);
481 #else
482 static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
483 static inline void scsi_autopm_put_device(struct scsi_device *d) {}
484 #endif /* CONFIG_PM */
485
486 static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
487 {
488         return device_reprobe(&sdev->sdev_gendev);
489 }
490
491 static inline unsigned int sdev_channel(struct scsi_device *sdev)
492 {
493         return sdev->channel;
494 }
495
496 static inline unsigned int sdev_id(struct scsi_device *sdev)
497 {
498         return sdev->id;
499 }
500
501 #define scmd_id(scmd) sdev_id((scmd)->device)
502 #define scmd_channel(scmd) sdev_channel((scmd)->device)
503
504 /*
505  * checks for positions of the SCSI state machine
506  */
507 static inline int scsi_device_online(struct scsi_device *sdev)
508 {
509         return (sdev->sdev_state != SDEV_OFFLINE &&
510                 sdev->sdev_state != SDEV_TRANSPORT_OFFLINE &&
511                 sdev->sdev_state != SDEV_DEL);
512 }
513 static inline int scsi_device_blocked(struct scsi_device *sdev)
514 {
515         return sdev->sdev_state == SDEV_BLOCK ||
516                 sdev->sdev_state == SDEV_CREATED_BLOCK;
517 }
518 static inline int scsi_device_created(struct scsi_device *sdev)
519 {
520         return sdev->sdev_state == SDEV_CREATED ||
521                 sdev->sdev_state == SDEV_CREATED_BLOCK;
522 }
523
524 int scsi_internal_device_block_nowait(struct scsi_device *sdev);
525 int scsi_internal_device_unblock_nowait(struct scsi_device *sdev,
526                                         enum scsi_device_state new_state);
527
528 /* accessor functions for the SCSI parameters */
529 static inline int scsi_device_sync(struct scsi_device *sdev)
530 {
531         return sdev->sdtr;
532 }
533 static inline int scsi_device_wide(struct scsi_device *sdev)
534 {
535         return sdev->wdtr;
536 }
537 static inline int scsi_device_dt(struct scsi_device *sdev)
538 {
539         return sdev->ppr;
540 }
541 static inline int scsi_device_dt_only(struct scsi_device *sdev)
542 {
543         if (sdev->inquiry_len < 57)
544                 return 0;
545         return (sdev->inquiry[56] & 0x0c) == 0x04;
546 }
547 static inline int scsi_device_ius(struct scsi_device *sdev)
548 {
549         if (sdev->inquiry_len < 57)
550                 return 0;
551         return sdev->inquiry[56] & 0x01;
552 }
553 static inline int scsi_device_qas(struct scsi_device *sdev)
554 {
555         if (sdev->inquiry_len < 57)
556                 return 0;
557         return sdev->inquiry[56] & 0x02;
558 }
559 static inline int scsi_device_enclosure(struct scsi_device *sdev)
560 {
561         return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
562 }
563
564 static inline int scsi_device_protection(struct scsi_device *sdev)
565 {
566         if (sdev->no_dif)
567                 return 0;
568
569         return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
570 }
571
572 static inline int scsi_device_tpgs(struct scsi_device *sdev)
573 {
574         return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
575 }
576
577 /**
578  * scsi_device_supports_vpd - test if a device supports VPD pages
579  * @sdev: the &struct scsi_device to test
580  *
581  * If the 'try_vpd_pages' flag is set it takes precedence.
582  * Otherwise we will assume VPD pages are supported if the
583  * SCSI level is at least SPC-3 and 'skip_vpd_pages' is not set.
584  */
585 static inline int scsi_device_supports_vpd(struct scsi_device *sdev)
586 {
587         /* Attempt VPD inquiry if the device blacklist explicitly calls
588          * for it.
589          */
590         if (sdev->try_vpd_pages)
591                 return 1;
592         /*
593          * Although VPD inquiries can go to SCSI-2 type devices,
594          * some USB ones crash on receiving them, and the pages
595          * we currently ask for are mandatory for SPC-2 and beyond
596          */
597         if (sdev->scsi_level >= SCSI_SPC_2 && !sdev->skip_vpd_pages)
598                 return 1;
599         return 0;
600 }
601
602 static inline int scsi_device_busy(struct scsi_device *sdev)
603 {
604         return sbitmap_weight(&sdev->budget_map);
605 }
606
607 #define MODULE_ALIAS_SCSI_DEVICE(type) \
608         MODULE_ALIAS("scsi:t-" __stringify(type) "*")
609 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
610
611 #endif /* _SCSI_SCSI_DEVICE_H */