Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
[linux-2.6-microblaze.git] / include / linux / mfd / dbx500-prcmu.h
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Copyright (C) ST Ericsson SA 2011
4  *
5  * STE Ux500 PRCMU API
6  */
7 #ifndef __MACH_PRCMU_H
8 #define __MACH_PRCMU_H
9
10 #include <linux/interrupt.h>
11 #include <linux/notifier.h>
12 #include <linux/err.h>
13
14 #include <dt-bindings/mfd/dbx500-prcmu.h> /* For clock identifiers */
15
16 /* Offset for the firmware version within the TCPM */
17 #define DB8500_PRCMU_FW_VERSION_OFFSET 0xA4
18 #define DBX540_PRCMU_FW_VERSION_OFFSET 0xA8
19
20 /* PRCMU Wakeup defines */
21 enum prcmu_wakeup_index {
22         PRCMU_WAKEUP_INDEX_RTC,
23         PRCMU_WAKEUP_INDEX_RTT0,
24         PRCMU_WAKEUP_INDEX_RTT1,
25         PRCMU_WAKEUP_INDEX_HSI0,
26         PRCMU_WAKEUP_INDEX_HSI1,
27         PRCMU_WAKEUP_INDEX_USB,
28         PRCMU_WAKEUP_INDEX_ABB,
29         PRCMU_WAKEUP_INDEX_ABB_FIFO,
30         PRCMU_WAKEUP_INDEX_ARM,
31         PRCMU_WAKEUP_INDEX_CD_IRQ,
32         NUM_PRCMU_WAKEUP_INDICES
33 };
34 #define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name))
35
36 /* EPOD (power domain) IDs */
37
38 /*
39  * DB8500 EPODs
40  * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP
41  * - EPOD_ID_SVAPIPE: power domain for SVA pipe
42  * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP
43  * - EPOD_ID_SIAPIPE: power domain for SIA pipe
44  * - EPOD_ID_SGA: power domain for SGA
45  * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE
46  * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2
47  * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4
48  * - NUM_EPOD_ID: number of power domains
49  *
50  * TODO: These should be prefixed.
51  */
52 #define EPOD_ID_SVAMMDSP        0
53 #define EPOD_ID_SVAPIPE         1
54 #define EPOD_ID_SIAMMDSP        2
55 #define EPOD_ID_SIAPIPE         3
56 #define EPOD_ID_SGA             4
57 #define EPOD_ID_B2R2_MCDE       5
58 #define EPOD_ID_ESRAM12         6
59 #define EPOD_ID_ESRAM34         7
60 #define NUM_EPOD_ID             8
61
62 /*
63  * state definition for EPOD (power domain)
64  * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
65  * - EPOD_STATE_OFF: The EPOD is switched off
66  * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in
67  *                         retention
68  * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off
69  * - EPOD_STATE_ON: Same as above, but with clock enabled
70  */
71 #define EPOD_STATE_NO_CHANGE    0x00
72 #define EPOD_STATE_OFF          0x01
73 #define EPOD_STATE_RAMRET       0x02
74 #define EPOD_STATE_ON_CLK_OFF   0x03
75 #define EPOD_STATE_ON           0x04
76
77 /*
78  * CLKOUT sources
79  */
80 #define PRCMU_CLKSRC_CLK38M             0x00
81 #define PRCMU_CLKSRC_ACLK               0x01
82 #define PRCMU_CLKSRC_SYSCLK             0x02
83 #define PRCMU_CLKSRC_LCDCLK             0x03
84 #define PRCMU_CLKSRC_SDMMCCLK           0x04
85 #define PRCMU_CLKSRC_TVCLK              0x05
86 #define PRCMU_CLKSRC_TIMCLK             0x06
87 #define PRCMU_CLKSRC_CLK009             0x07
88 /* These are only valid for CLKOUT1: */
89 #define PRCMU_CLKSRC_SIAMMDSPCLK        0x40
90 #define PRCMU_CLKSRC_I2CCLK             0x41
91 #define PRCMU_CLKSRC_MSP02CLK           0x42
92 #define PRCMU_CLKSRC_ARMPLL_OBSCLK      0x43
93 #define PRCMU_CLKSRC_HSIRXCLK           0x44
94 #define PRCMU_CLKSRC_HSITXCLK           0x45
95 #define PRCMU_CLKSRC_ARMCLKFIX          0x46
96 #define PRCMU_CLKSRC_HDMICLK            0x47
97
98 /**
99  * enum prcmu_wdog_id - PRCMU watchdog IDs
100  * @PRCMU_WDOG_ALL: use all timers
101  * @PRCMU_WDOG_CPU1: use first CPU timer only
102  * @PRCMU_WDOG_CPU2: use second CPU timer conly
103  */
104 enum prcmu_wdog_id {
105         PRCMU_WDOG_ALL = 0x00,
106         PRCMU_WDOG_CPU1 = 0x01,
107         PRCMU_WDOG_CPU2 = 0x02,
108 };
109
110 /**
111  * enum ape_opp - APE OPP states definition
112  * @APE_OPP_INIT:
113  * @APE_NO_CHANGE: The APE operating point is unchanged
114  * @APE_100_OPP: The new APE operating point is ape100opp
115  * @APE_50_OPP: 50%
116  * @APE_50_PARTLY_25_OPP: 50%, except some clocks at 25%.
117  */
118 enum ape_opp {
119         APE_OPP_INIT = 0x00,
120         APE_NO_CHANGE = 0x01,
121         APE_100_OPP = 0x02,
122         APE_50_OPP = 0x03,
123         APE_50_PARTLY_25_OPP = 0xFF,
124 };
125
126 /**
127  * enum arm_opp - ARM OPP states definition
128  * @ARM_OPP_INIT:
129  * @ARM_NO_CHANGE: The ARM operating point is unchanged
130  * @ARM_100_OPP: The new ARM operating point is arm100opp
131  * @ARM_50_OPP: The new ARM operating point is arm50opp
132  * @ARM_MAX_OPP: Operating point is "max" (more than 100)
133  * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100
134  * @ARM_EXTCLK: The new ARM operating point is armExtClk
135  */
136 enum arm_opp {
137         ARM_OPP_INIT = 0x00,
138         ARM_NO_CHANGE = 0x01,
139         ARM_100_OPP = 0x02,
140         ARM_50_OPP = 0x03,
141         ARM_MAX_OPP = 0x04,
142         ARM_MAX_FREQ100OPP = 0x05,
143         ARM_EXTCLK = 0x07
144 };
145
146 /**
147  * enum ddr_opp - DDR OPP states definition
148  * @DDR_100_OPP: The new DDR operating point is ddr100opp
149  * @DDR_50_OPP: The new DDR operating point is ddr50opp
150  * @DDR_25_OPP: The new DDR operating point is ddr25opp
151  */
152 enum ddr_opp {
153         DDR_100_OPP = 0x00,
154         DDR_50_OPP = 0x01,
155         DDR_25_OPP = 0x02,
156 };
157
158 /*
159  * Definitions for controlling ESRAM0 in deep sleep.
160  */
161 #define ESRAM0_DEEP_SLEEP_STATE_OFF 1
162 #define ESRAM0_DEEP_SLEEP_STATE_RET 2
163
164 /**
165  * enum ddr_pwrst - DDR power states definition
166  * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
167  * @DDR_PWR_STATE_ON:
168  * @DDR_PWR_STATE_OFFLOWLAT:
169  * @DDR_PWR_STATE_OFFHIGHLAT:
170  */
171 enum ddr_pwrst {
172         DDR_PWR_STATE_UNCHANGED     = 0x00,
173         DDR_PWR_STATE_ON            = 0x01,
174         DDR_PWR_STATE_OFFLOWLAT     = 0x02,
175         DDR_PWR_STATE_OFFHIGHLAT    = 0x03
176 };
177
178 #define DB8500_PRCMU_LEGACY_OFFSET              0xDD4
179
180 #define PRCMU_FW_PROJECT_U8500          2
181 #define PRCMU_FW_PROJECT_U8400          3
182 #define PRCMU_FW_PROJECT_U9500          4 /* Customer specific */
183 #define PRCMU_FW_PROJECT_U8500_MBB      5
184 #define PRCMU_FW_PROJECT_U8500_C1       6
185 #define PRCMU_FW_PROJECT_U8500_C2       7
186 #define PRCMU_FW_PROJECT_U8500_C3       8
187 #define PRCMU_FW_PROJECT_U8500_C4       9
188 #define PRCMU_FW_PROJECT_U9500_MBL      10
189 #define PRCMU_FW_PROJECT_U8500_MBL      11 /* Customer specific */
190 #define PRCMU_FW_PROJECT_U8500_MBL2     12 /* Customer specific */
191 #define PRCMU_FW_PROJECT_U8520          13
192 #define PRCMU_FW_PROJECT_U8420          14
193 #define PRCMU_FW_PROJECT_U8420_SYSCLK   17
194 #define PRCMU_FW_PROJECT_A9420          20
195 /* [32..63] 9540 and derivatives */
196 #define PRCMU_FW_PROJECT_U9540          32
197 /* [64..95] 8540 and derivatives */
198 #define PRCMU_FW_PROJECT_L8540          64
199 /* [96..126] 8580 and derivatives */
200 #define PRCMU_FW_PROJECT_L8580          96
201
202 #define PRCMU_FW_PROJECT_NAME_LEN       20
203 struct prcmu_fw_version {
204         u32 project; /* Notice, project shifted with 8 on ux540 */
205         u8 api_version;
206         u8 func_version;
207         u8 errata;
208         char project_name[PRCMU_FW_PROJECT_NAME_LEN];
209 };
210
211 #include <linux/mfd/db8500-prcmu.h>
212
213 #if defined(CONFIG_UX500_SOC_DB8500)
214
215 static inline void prcmu_early_init(void)
216 {
217         return db8500_prcmu_early_init();
218 }
219
220 static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
221                 bool keep_ap_pll)
222 {
223         return db8500_prcmu_set_power_state(state, keep_ulp_clk,
224                 keep_ap_pll);
225 }
226
227 static inline u8 prcmu_get_power_state_result(void)
228 {
229         return db8500_prcmu_get_power_state_result();
230 }
231
232 static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
233 {
234         return db8500_prcmu_set_epod(epod_id, epod_state);
235 }
236
237 static inline void prcmu_enable_wakeups(u32 wakeups)
238 {
239         db8500_prcmu_enable_wakeups(wakeups);
240 }
241
242 static inline void prcmu_disable_wakeups(void)
243 {
244         prcmu_enable_wakeups(0);
245 }
246
247 static inline void prcmu_config_abb_event_readout(u32 abb_events)
248 {
249         db8500_prcmu_config_abb_event_readout(abb_events);
250 }
251
252 static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
253 {
254         db8500_prcmu_get_abb_event_buffer(buf);
255 }
256
257 int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
258 int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
259 int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size);
260
261 int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
262
263 static inline int prcmu_request_clock(u8 clock, bool enable)
264 {
265         return db8500_prcmu_request_clock(clock, enable);
266 }
267
268 unsigned long prcmu_clock_rate(u8 clock);
269 long prcmu_round_clock_rate(u8 clock, unsigned long rate);
270 int prcmu_set_clock_rate(u8 clock, unsigned long rate);
271
272 static inline int prcmu_get_ddr_opp(void)
273 {
274         return db8500_prcmu_get_ddr_opp();
275 }
276
277 static inline int prcmu_set_arm_opp(u8 opp)
278 {
279         return db8500_prcmu_set_arm_opp(opp);
280 }
281
282 static inline int prcmu_get_arm_opp(void)
283 {
284         return db8500_prcmu_get_arm_opp();
285 }
286
287 static inline int prcmu_set_ape_opp(u8 opp)
288 {
289         return db8500_prcmu_set_ape_opp(opp);
290 }
291
292 static inline int prcmu_get_ape_opp(void)
293 {
294         return db8500_prcmu_get_ape_opp();
295 }
296
297 static inline int prcmu_request_ape_opp_100_voltage(bool enable)
298 {
299         return db8500_prcmu_request_ape_opp_100_voltage(enable);
300 }
301
302 static inline void prcmu_system_reset(u16 reset_code)
303 {
304         return db8500_prcmu_system_reset(reset_code);
305 }
306
307 static inline u16 prcmu_get_reset_code(void)
308 {
309         return db8500_prcmu_get_reset_code();
310 }
311
312 int prcmu_ac_wake_req(void);
313 void prcmu_ac_sleep_req(void);
314 static inline void prcmu_modem_reset(void)
315 {
316         return db8500_prcmu_modem_reset();
317 }
318
319 static inline bool prcmu_is_ac_wake_requested(void)
320 {
321         return db8500_prcmu_is_ac_wake_requested();
322 }
323
324 static inline int prcmu_config_esram0_deep_sleep(u8 state)
325 {
326         return db8500_prcmu_config_esram0_deep_sleep(state);
327 }
328
329 static inline int prcmu_config_hotdog(u8 threshold)
330 {
331         return db8500_prcmu_config_hotdog(threshold);
332 }
333
334 static inline int prcmu_config_hotmon(u8 low, u8 high)
335 {
336         return db8500_prcmu_config_hotmon(low, high);
337 }
338
339 static inline int prcmu_start_temp_sense(u16 cycles32k)
340 {
341         return  db8500_prcmu_start_temp_sense(cycles32k);
342 }
343
344 static inline int prcmu_stop_temp_sense(void)
345 {
346         return  db8500_prcmu_stop_temp_sense();
347 }
348
349 static inline u32 prcmu_read(unsigned int reg)
350 {
351         return db8500_prcmu_read(reg);
352 }
353
354 static inline void prcmu_write(unsigned int reg, u32 value)
355 {
356         db8500_prcmu_write(reg, value);
357 }
358
359 static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
360 {
361         db8500_prcmu_write_masked(reg, mask, value);
362 }
363
364 static inline int prcmu_enable_a9wdog(u8 id)
365 {
366         return db8500_prcmu_enable_a9wdog(id);
367 }
368
369 static inline int prcmu_disable_a9wdog(u8 id)
370 {
371         return db8500_prcmu_disable_a9wdog(id);
372 }
373
374 static inline int prcmu_kick_a9wdog(u8 id)
375 {
376         return db8500_prcmu_kick_a9wdog(id);
377 }
378
379 static inline int prcmu_load_a9wdog(u8 id, u32 timeout)
380 {
381         return db8500_prcmu_load_a9wdog(id, timeout);
382 }
383
384 static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
385 {
386         return db8500_prcmu_config_a9wdog(num, sleep_auto_off);
387 }
388 #else
389
390 static inline void prcmu_early_init(void) {}
391
392 static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
393         bool keep_ap_pll)
394 {
395         return 0;
396 }
397
398 static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
399 {
400         return 0;
401 }
402
403 static inline void prcmu_enable_wakeups(u32 wakeups) {}
404
405 static inline void prcmu_disable_wakeups(void) {}
406
407 static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
408 {
409         return -ENOSYS;
410 }
411
412 static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
413 {
414         return -ENOSYS;
415 }
416
417 static inline int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask,
418         u8 size)
419 {
420         return -ENOSYS;
421 }
422
423 static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
424 {
425         return 0;
426 }
427
428 static inline int prcmu_request_clock(u8 clock, bool enable)
429 {
430         return 0;
431 }
432
433 static inline long prcmu_round_clock_rate(u8 clock, unsigned long rate)
434 {
435         return 0;
436 }
437
438 static inline int prcmu_set_clock_rate(u8 clock, unsigned long rate)
439 {
440         return 0;
441 }
442
443 static inline unsigned long prcmu_clock_rate(u8 clock)
444 {
445         return 0;
446 }
447
448 static inline int prcmu_set_ape_opp(u8 opp)
449 {
450         return 0;
451 }
452
453 static inline int prcmu_get_ape_opp(void)
454 {
455         return APE_100_OPP;
456 }
457
458 static inline int prcmu_request_ape_opp_100_voltage(bool enable)
459 {
460         return 0;
461 }
462
463 static inline int prcmu_set_arm_opp(u8 opp)
464 {
465         return 0;
466 }
467
468 static inline int prcmu_get_arm_opp(void)
469 {
470         return ARM_100_OPP;
471 }
472
473 static inline int prcmu_get_ddr_opp(void)
474 {
475         return DDR_100_OPP;
476 }
477
478 static inline void prcmu_system_reset(u16 reset_code) {}
479
480 static inline u16 prcmu_get_reset_code(void)
481 {
482         return 0;
483 }
484
485 static inline int prcmu_ac_wake_req(void)
486 {
487         return 0;
488 }
489
490 static inline void prcmu_ac_sleep_req(void) {}
491
492 static inline void prcmu_modem_reset(void) {}
493
494 static inline bool prcmu_is_ac_wake_requested(void)
495 {
496         return false;
497 }
498
499 static inline int prcmu_config_esram0_deep_sleep(u8 state)
500 {
501         return 0;
502 }
503
504 static inline void prcmu_config_abb_event_readout(u32 abb_events) {}
505
506 static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
507 {
508         *buf = NULL;
509 }
510
511 static inline int prcmu_config_hotdog(u8 threshold)
512 {
513         return 0;
514 }
515
516 static inline int prcmu_config_hotmon(u8 low, u8 high)
517 {
518         return 0;
519 }
520
521 static inline int prcmu_start_temp_sense(u16 cycles32k)
522 {
523         return 0;
524 }
525
526 static inline int prcmu_stop_temp_sense(void)
527 {
528         return 0;
529 }
530
531 static inline u32 prcmu_read(unsigned int reg)
532 {
533         return 0;
534 }
535
536 static inline void prcmu_write(unsigned int reg, u32 value) {}
537
538 static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
539
540 #endif
541
542 static inline void prcmu_set(unsigned int reg, u32 bits)
543 {
544         prcmu_write_masked(reg, bits, bits);
545 }
546
547 static inline void prcmu_clear(unsigned int reg, u32 bits)
548 {
549         prcmu_write_masked(reg, bits, 0);
550 }
551
552 /* PRCMU QoS APE OPP class */
553 #define PRCMU_QOS_APE_OPP 1
554 #define PRCMU_QOS_DDR_OPP 2
555 #define PRCMU_QOS_ARM_OPP 3
556 #define PRCMU_QOS_DEFAULT_VALUE -1
557
558 #ifdef CONFIG_DBX500_PRCMU_QOS_POWER
559
560 unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
561 void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
562 void prcmu_qos_force_opp(int, s32);
563 int prcmu_qos_requirement(int pm_qos_class);
564 int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value);
565 int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value);
566 void prcmu_qos_remove_requirement(int pm_qos_class, char *name);
567 int prcmu_qos_add_notifier(int prcmu_qos_class,
568                            struct notifier_block *notifier);
569 int prcmu_qos_remove_notifier(int prcmu_qos_class,
570                               struct notifier_block *notifier);
571
572 #else
573
574 static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void)
575 {
576         return 0;
577 }
578
579 static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {}
580
581 static inline void prcmu_qos_force_opp(int prcmu_qos_class, s32 i) {}
582
583 static inline int prcmu_qos_requirement(int prcmu_qos_class)
584 {
585         return 0;
586 }
587
588 static inline int prcmu_qos_add_requirement(int prcmu_qos_class,
589                                             char *name, s32 value)
590 {
591         return 0;
592 }
593
594 static inline int prcmu_qos_update_requirement(int prcmu_qos_class,
595                                                char *name, s32 new_value)
596 {
597         return 0;
598 }
599
600 static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name)
601 {
602 }
603
604 static inline int prcmu_qos_add_notifier(int prcmu_qos_class,
605                                          struct notifier_block *notifier)
606 {
607         return 0;
608 }
609 static inline int prcmu_qos_remove_notifier(int prcmu_qos_class,
610                                             struct notifier_block *notifier)
611 {
612         return 0;
613 }
614
615 #endif
616
617 #endif /* __MACH_PRCMU_H */