Merge tag 'acpi-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
[linux-2.6-microblaze.git] / include / linux / hwspinlock.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Hardware spinlock public header
4  *
5  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
6  *
7  * Contact: Ohad Ben-Cohen <ohad@wizery.com>
8  */
9
10 #ifndef __LINUX_HWSPINLOCK_H
11 #define __LINUX_HWSPINLOCK_H
12
13 #include <linux/err.h>
14 #include <linux/sched.h>
15
16 /* hwspinlock mode argument */
17 #define HWLOCK_IRQSTATE         0x01 /* Disable interrupts, save state */
18 #define HWLOCK_IRQ              0x02 /* Disable interrupts, don't save state */
19 #define HWLOCK_RAW              0x03
20 #define HWLOCK_IN_ATOMIC        0x04 /* Called while in atomic context */
21
22 struct device;
23 struct device_node;
24 struct hwspinlock;
25 struct hwspinlock_device;
26 struct hwspinlock_ops;
27
28 /**
29  * struct hwspinlock_pdata - platform data for hwspinlock drivers
30  * @base_id: base id for this hwspinlock device
31  *
32  * hwspinlock devices provide system-wide hardware locks that are used
33  * by remote processors that have no other way to achieve synchronization.
34  *
35  * To achieve that, each physical lock must have a system-wide id number
36  * that is agreed upon, otherwise remote processors can't possibly assume
37  * they're using the same hardware lock.
38  *
39  * Usually boards have a single hwspinlock device, which provides several
40  * hwspinlocks, and in this case, they can be trivially numbered 0 to
41  * (num-of-locks - 1).
42  *
43  * In case boards have several hwspinlocks devices, a different base id
44  * should be used for each hwspinlock device (they can't all use 0 as
45  * a starting id!).
46  *
47  * This platform data structure should be used to provide the base id
48  * for each device (which is trivially 0 when only a single hwspinlock
49  * device exists). It can be shared between different platforms, hence
50  * its location.
51  */
52 struct hwspinlock_pdata {
53         int base_id;
54 };
55
56 #ifdef CONFIG_HWSPINLOCK
57
58 int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
59                 const struct hwspinlock_ops *ops, int base_id, int num_locks);
60 int hwspin_lock_unregister(struct hwspinlock_device *bank);
61 struct hwspinlock *hwspin_lock_request(void);
62 struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
63 int hwspin_lock_free(struct hwspinlock *hwlock);
64 int of_hwspin_lock_get_id(struct device_node *np, int index);
65 int hwspin_lock_get_id(struct hwspinlock *hwlock);
66 int __hwspin_lock_timeout(struct hwspinlock *, unsigned int, int,
67                                                         unsigned long *);
68 int __hwspin_trylock(struct hwspinlock *, int, unsigned long *);
69 void __hwspin_unlock(struct hwspinlock *, int, unsigned long *);
70 int of_hwspin_lock_get_id_byname(struct device_node *np, const char *name);
71 int devm_hwspin_lock_free(struct device *dev, struct hwspinlock *hwlock);
72 struct hwspinlock *devm_hwspin_lock_request(struct device *dev);
73 struct hwspinlock *devm_hwspin_lock_request_specific(struct device *dev,
74                                                      unsigned int id);
75 int devm_hwspin_lock_unregister(struct device *dev,
76                                 struct hwspinlock_device *bank);
77 int devm_hwspin_lock_register(struct device *dev,
78                               struct hwspinlock_device *bank,
79                               const struct hwspinlock_ops *ops,
80                               int base_id, int num_locks);
81
82 #else /* !CONFIG_HWSPINLOCK */
83
84 /*
85  * We don't want these functions to fail if CONFIG_HWSPINLOCK is not
86  * enabled. We prefer to silently succeed in this case, and let the
87  * code path get compiled away. This way, if CONFIG_HWSPINLOCK is not
88  * required on a given setup, users will still work.
89  *
90  * The only exception is hwspin_lock_register/hwspin_lock_unregister, with which
91  * we _do_ want users to fail (no point in registering hwspinlock instances if
92  * the framework is not available).
93  *
94  * Note: ERR_PTR(-ENODEV) will still be considered a success for NULL-checking
95  * users. Others, which care, can still check this with IS_ERR.
96  */
97 static inline struct hwspinlock *hwspin_lock_request(void)
98 {
99         return ERR_PTR(-ENODEV);
100 }
101
102 static inline struct hwspinlock *hwspin_lock_request_specific(unsigned int id)
103 {
104         return ERR_PTR(-ENODEV);
105 }
106
107 static inline int hwspin_lock_free(struct hwspinlock *hwlock)
108 {
109         return 0;
110 }
111
112 static inline
113 int __hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to,
114                                         int mode, unsigned long *flags)
115 {
116         return 0;
117 }
118
119 static inline
120 int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
121 {
122         return 0;
123 }
124
125 static inline
126 void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
127 {
128 }
129
130 static inline int of_hwspin_lock_get_id(struct device_node *np, int index)
131 {
132         return 0;
133 }
134
135 static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
136 {
137         return 0;
138 }
139
140 static inline
141 int of_hwspin_lock_get_id_byname(struct device_node *np, const char *name)
142 {
143         return 0;
144 }
145
146 static inline
147 int devm_hwspin_lock_free(struct device *dev, struct hwspinlock *hwlock)
148 {
149         return 0;
150 }
151
152 static inline struct hwspinlock *devm_hwspin_lock_request(struct device *dev)
153 {
154         return ERR_PTR(-ENODEV);
155 }
156
157 static inline
158 struct hwspinlock *devm_hwspin_lock_request_specific(struct device *dev,
159                                                      unsigned int id)
160 {
161         return ERR_PTR(-ENODEV);
162 }
163
164 #endif /* !CONFIG_HWSPINLOCK */
165
166 /**
167  * hwspin_trylock_irqsave() - try to lock an hwspinlock, disable interrupts
168  * @hwlock: an hwspinlock which we want to trylock
169  * @flags: a pointer to where the caller's interrupt state will be saved at
170  *
171  * This function attempts to lock the underlying hwspinlock, and will
172  * immediately fail if the hwspinlock is already locked.
173  *
174  * Upon a successful return from this function, preemption and local
175  * interrupts are disabled (previous interrupts state is saved at @flags),
176  * so the caller must not sleep, and is advised to release the hwspinlock
177  * as soon as possible.
178  *
179  * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
180  * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
181  */
182 static inline
183 int hwspin_trylock_irqsave(struct hwspinlock *hwlock, unsigned long *flags)
184 {
185         return __hwspin_trylock(hwlock, HWLOCK_IRQSTATE, flags);
186 }
187
188 /**
189  * hwspin_trylock_irq() - try to lock an hwspinlock, disable interrupts
190  * @hwlock: an hwspinlock which we want to trylock
191  *
192  * This function attempts to lock the underlying hwspinlock, and will
193  * immediately fail if the hwspinlock is already locked.
194  *
195  * Upon a successful return from this function, preemption and local
196  * interrupts are disabled, so the caller must not sleep, and is advised
197  * to release the hwspinlock as soon as possible.
198  *
199  * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
200  * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
201  */
202 static inline int hwspin_trylock_irq(struct hwspinlock *hwlock)
203 {
204         return __hwspin_trylock(hwlock, HWLOCK_IRQ, NULL);
205 }
206
207 /**
208  * hwspin_trylock_raw() - attempt to lock a specific hwspinlock
209  * @hwlock: an hwspinlock which we want to trylock
210  *
211  * This function attempts to lock an hwspinlock, and will immediately fail
212  * if the hwspinlock is already taken.
213  *
214  * Caution: User must protect the routine of getting hardware lock with mutex
215  * or spinlock to avoid dead-lock, that will let user can do some time-consuming
216  * or sleepable operations under the hardware lock.
217  *
218  * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
219  * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
220  */
221 static inline int hwspin_trylock_raw(struct hwspinlock *hwlock)
222 {
223         return __hwspin_trylock(hwlock, HWLOCK_RAW, NULL);
224 }
225
226 /**
227  * hwspin_trylock_in_atomic() - attempt to lock a specific hwspinlock
228  * @hwlock: an hwspinlock which we want to trylock
229  *
230  * This function attempts to lock an hwspinlock, and will immediately fail
231  * if the hwspinlock is already taken.
232  *
233  * This function shall be called only from an atomic context.
234  *
235  * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
236  * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
237  */
238 static inline int hwspin_trylock_in_atomic(struct hwspinlock *hwlock)
239 {
240         return __hwspin_trylock(hwlock, HWLOCK_IN_ATOMIC, NULL);
241 }
242
243 /**
244  * hwspin_trylock() - attempt to lock a specific hwspinlock
245  * @hwlock: an hwspinlock which we want to trylock
246  *
247  * This function attempts to lock an hwspinlock, and will immediately fail
248  * if the hwspinlock is already taken.
249  *
250  * Upon a successful return from this function, preemption is disabled,
251  * so the caller must not sleep, and is advised to release the hwspinlock
252  * as soon as possible. This is required in order to minimize remote cores
253  * polling on the hardware interconnect.
254  *
255  * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
256  * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
257  */
258 static inline int hwspin_trylock(struct hwspinlock *hwlock)
259 {
260         return __hwspin_trylock(hwlock, 0, NULL);
261 }
262
263 /**
264  * hwspin_lock_timeout_irqsave() - lock hwspinlock, with timeout, disable irqs
265  * @hwlock: the hwspinlock to be locked
266  * @to: timeout value in msecs
267  * @flags: a pointer to where the caller's interrupt state will be saved at
268  *
269  * This function locks the underlying @hwlock. If the @hwlock
270  * is already taken, the function will busy loop waiting for it to
271  * be released, but give up when @timeout msecs have elapsed.
272  *
273  * Upon a successful return from this function, preemption and local interrupts
274  * are disabled (plus previous interrupt state is saved), so the caller must
275  * not sleep, and is advised to release the hwspinlock as soon as possible.
276  *
277  * Returns 0 when the @hwlock was successfully taken, and an appropriate
278  * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
279  * busy after @timeout msecs). The function will never sleep.
280  */
281 static inline int hwspin_lock_timeout_irqsave(struct hwspinlock *hwlock,
282                                 unsigned int to, unsigned long *flags)
283 {
284         return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQSTATE, flags);
285 }
286
287 /**
288  * hwspin_lock_timeout_irq() - lock hwspinlock, with timeout, disable irqs
289  * @hwlock: the hwspinlock to be locked
290  * @to: timeout value in msecs
291  *
292  * This function locks the underlying @hwlock. If the @hwlock
293  * is already taken, the function will busy loop waiting for it to
294  * be released, but give up when @timeout msecs have elapsed.
295  *
296  * Upon a successful return from this function, preemption and local interrupts
297  * are disabled so the caller must not sleep, and is advised to release the
298  * hwspinlock as soon as possible.
299  *
300  * Returns 0 when the @hwlock was successfully taken, and an appropriate
301  * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
302  * busy after @timeout msecs). The function will never sleep.
303  */
304 static inline
305 int hwspin_lock_timeout_irq(struct hwspinlock *hwlock, unsigned int to)
306 {
307         return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQ, NULL);
308 }
309
310 /**
311  * hwspin_lock_timeout_raw() - lock an hwspinlock with timeout limit
312  * @hwlock: the hwspinlock to be locked
313  * @to: timeout value in msecs
314  *
315  * This function locks the underlying @hwlock. If the @hwlock
316  * is already taken, the function will busy loop waiting for it to
317  * be released, but give up when @timeout msecs have elapsed.
318  *
319  * Caution: User must protect the routine of getting hardware lock with mutex
320  * or spinlock to avoid dead-lock, that will let user can do some time-consuming
321  * or sleepable operations under the hardware lock.
322  *
323  * Returns 0 when the @hwlock was successfully taken, and an appropriate
324  * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
325  * busy after @timeout msecs). The function will never sleep.
326  */
327 static inline
328 int hwspin_lock_timeout_raw(struct hwspinlock *hwlock, unsigned int to)
329 {
330         return __hwspin_lock_timeout(hwlock, to, HWLOCK_RAW, NULL);
331 }
332
333 /**
334  * hwspin_lock_timeout_in_atomic() - lock an hwspinlock with timeout limit
335  * @hwlock: the hwspinlock to be locked
336  * @to: timeout value in msecs
337  *
338  * This function locks the underlying @hwlock. If the @hwlock
339  * is already taken, the function will busy loop waiting for it to
340  * be released, but give up when @timeout msecs have elapsed.
341  *
342  * This function shall be called only from an atomic context and the timeout
343  * value shall not exceed a few msecs.
344  *
345  * Returns 0 when the @hwlock was successfully taken, and an appropriate
346  * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
347  * busy after @timeout msecs). The function will never sleep.
348  */
349 static inline
350 int hwspin_lock_timeout_in_atomic(struct hwspinlock *hwlock, unsigned int to)
351 {
352         return __hwspin_lock_timeout(hwlock, to, HWLOCK_IN_ATOMIC, NULL);
353 }
354
355 /**
356  * hwspin_lock_timeout() - lock an hwspinlock with timeout limit
357  * @hwlock: the hwspinlock to be locked
358  * @to: timeout value in msecs
359  *
360  * This function locks the underlying @hwlock. If the @hwlock
361  * is already taken, the function will busy loop waiting for it to
362  * be released, but give up when @timeout msecs have elapsed.
363  *
364  * Upon a successful return from this function, preemption is disabled
365  * so the caller must not sleep, and is advised to release the hwspinlock
366  * as soon as possible.
367  * This is required in order to minimize remote cores polling on the
368  * hardware interconnect.
369  *
370  * Returns 0 when the @hwlock was successfully taken, and an appropriate
371  * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
372  * busy after @timeout msecs). The function will never sleep.
373  */
374 static inline
375 int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to)
376 {
377         return __hwspin_lock_timeout(hwlock, to, 0, NULL);
378 }
379
380 /**
381  * hwspin_unlock_irqrestore() - unlock hwspinlock, restore irq state
382  * @hwlock: a previously-acquired hwspinlock which we want to unlock
383  * @flags: previous caller's interrupt state to restore
384  *
385  * This function will unlock a specific hwspinlock, enable preemption and
386  * restore the previous state of the local interrupts. It should be used
387  * to undo, e.g., hwspin_trylock_irqsave().
388  *
389  * @hwlock must be already locked before calling this function: it is a bug
390  * to call unlock on a @hwlock that is already unlocked.
391  */
392 static inline void hwspin_unlock_irqrestore(struct hwspinlock *hwlock,
393                                                         unsigned long *flags)
394 {
395         __hwspin_unlock(hwlock, HWLOCK_IRQSTATE, flags);
396 }
397
398 /**
399  * hwspin_unlock_irq() - unlock hwspinlock, enable interrupts
400  * @hwlock: a previously-acquired hwspinlock which we want to unlock
401  *
402  * This function will unlock a specific hwspinlock, enable preemption and
403  * enable local interrupts. Should be used to undo hwspin_lock_irq().
404  *
405  * @hwlock must be already locked (e.g. by hwspin_trylock_irq()) before
406  * calling this function: it is a bug to call unlock on a @hwlock that is
407  * already unlocked.
408  */
409 static inline void hwspin_unlock_irq(struct hwspinlock *hwlock)
410 {
411         __hwspin_unlock(hwlock, HWLOCK_IRQ, NULL);
412 }
413
414 /**
415  * hwspin_unlock_raw() - unlock hwspinlock
416  * @hwlock: a previously-acquired hwspinlock which we want to unlock
417  *
418  * This function will unlock a specific hwspinlock.
419  *
420  * @hwlock must be already locked (e.g. by hwspin_trylock()) before calling
421  * this function: it is a bug to call unlock on a @hwlock that is already
422  * unlocked.
423  */
424 static inline void hwspin_unlock_raw(struct hwspinlock *hwlock)
425 {
426         __hwspin_unlock(hwlock, HWLOCK_RAW, NULL);
427 }
428
429 /**
430  * hwspin_unlock_in_atomic() - unlock hwspinlock
431  * @hwlock: a previously-acquired hwspinlock which we want to unlock
432  *
433  * This function will unlock a specific hwspinlock.
434  *
435  * @hwlock must be already locked (e.g. by hwspin_trylock()) before calling
436  * this function: it is a bug to call unlock on a @hwlock that is already
437  * unlocked.
438  */
439 static inline void hwspin_unlock_in_atomic(struct hwspinlock *hwlock)
440 {
441         __hwspin_unlock(hwlock, HWLOCK_IN_ATOMIC, NULL);
442 }
443
444 /**
445  * hwspin_unlock() - unlock hwspinlock
446  * @hwlock: a previously-acquired hwspinlock which we want to unlock
447  *
448  * This function will unlock a specific hwspinlock and enable preemption
449  * back.
450  *
451  * @hwlock must be already locked (e.g. by hwspin_trylock()) before calling
452  * this function: it is a bug to call unlock on a @hwlock that is already
453  * unlocked.
454  */
455 static inline void hwspin_unlock(struct hwspinlock *hwlock)
456 {
457         __hwspin_unlock(hwlock, 0, NULL);
458 }
459
460 #endif /* __LINUX_HWSPINLOCK_H */