drivers/usb/gadget/udc/fsl_qe_udc.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * driver/usb/gadget/fsl_qe_udc.c
   4  *
   5  * Copyright (c) 2006-2008 Freescale Semiconductor, Inc. All rights reserved.
   6  *
   7  *      Xie Xiaobo <X.Xie@freescale.com>
   8  *      Li Yang <leoli@freescale.com>
   9  *      Based on bareboard code from Shlomi Gridish.
  10  *
  11  * Description:
  12  * Freescle QE/CPM USB Pheripheral Controller Driver
  13  * The controller can be found on MPC8360, MPC8272, and etc.
  14  * MPC8360 Rev 1.1 may need QE mircocode update
  15  */
  16
  17 #undef USB_TRACE
  18
  19 #include <linux/module.h>
  20 #include <linux/kernel.h>
  21 #include <linux/ioport.h>
  22 #include <linux/types.h>
  23 #include <linux/errno.h>
  24 #include <linux/err.h>
  25 #include <linux/slab.h>
  26 #include <linux/list.h>
  27 #include <linux/interrupt.h>
  28 #include <linux/io.h>
  29 #include <linux/moduleparam.h>
  30 #include <linux/of_address.h>
  31 #include <linux/of_irq.h>
  32 #include <linux/of_platform.h>
  33 #include <linux/dma-mapping.h>
  34 #include <linux/usb/ch9.h>
  35 #include <linux/usb/gadget.h>
  36 #include <linux/usb/otg.h>
  37 #include <soc/fsl/qe/qe.h>
  38 #include <asm/cpm.h>
  39 #include <asm/dma.h>
  40 #include <asm/reg.h>
  41 #include "fsl_qe_udc.h"
  42
  43 #define DRIVER_DESC     "Freescale QE/CPM USB Device Controller driver"
  44 #define DRIVER_AUTHOR   "Xie XiaoBo"
  45 #define DRIVER_VERSION  "1.0"
  46
  47 #define DMA_ADDR_INVALID        (~(dma_addr_t)0)
  48
  49 static const char driver_name[] = "fsl_qe_udc";
  50 static const char driver_desc[] = DRIVER_DESC;
  51
  52 /*ep name is important in gadget, it should obey the convention of ep_match()*/
  53 static const char *const ep_name[] = {
  54         "ep0-control", /* everyone has ep0 */
  55         /* 3 configurable endpoints */
  56         "ep1",
  57         "ep2",
  58         "ep3",
  59 };
  60
  61 static const struct usb_endpoint_descriptor qe_ep0_desc = {
  62         .bLength =              USB_DT_ENDPOINT_SIZE,
  63         .bDescriptorType =      USB_DT_ENDPOINT,
  64
  65         .bEndpointAddress =     0,
  66         .bmAttributes =         USB_ENDPOINT_XFER_CONTROL,
  67         .wMaxPacketSize =       USB_MAX_CTRL_PAYLOAD,
  68 };
  69
  70 /********************************************************************
  71  *      Internal Used Function Start
  72 ********************************************************************/
  73 /*-----------------------------------------------------------------
  74  * done() - retire a request; caller blocked irqs
  75  *--------------------------------------------------------------*/
  76 static void done(struct qe_ep *ep, struct qe_req *req, int status)
  77 {
  78         struct qe_udc *udc = ep->udc;
  79         unsigned char stopped = ep->stopped;
  80
  81         /* the req->queue pointer is used by ep_queue() func, in which
  82          * the request will be added into a udc_ep->queue 'd tail
  83          * so here the req will be dropped from the ep->queue
  84          */
  85         list_del_init(&req->queue);
  86
  87         /* req.status should be set as -EINPROGRESS in ep_queue() */
  88         if (req->req.status == -EINPROGRESS)
  89                 req->req.status = status;
  90         else
  91                 status = req->req.status;
  92
  93         if (req->mapped) {
  94                 dma_unmap_single(udc->gadget.dev.parent,
  95                         req->req.dma, req->req.length,
  96                         ep_is_in(ep)
  97                                 ? DMA_TO_DEVICE
  98                                 : DMA_FROM_DEVICE);
  99                 req->req.dma = DMA_ADDR_INVALID;
 100                 req->mapped = 0;
 101         } else
 102                 dma_sync_single_for_cpu(udc->gadget.dev.parent,
 103                         req->req.dma, req->req.length,
 104                         ep_is_in(ep)
 105                                 ? DMA_TO_DEVICE
 106                                 : DMA_FROM_DEVICE);
 107
 108         if (status && (status != -ESHUTDOWN))
 109                 dev_vdbg(udc->dev, "complete %s req %p stat %d len %u/%u\n",
 110                         ep->ep.name, &req->req, status,
 111                         req->req.actual, req->req.length);
 112
 113         /* don't modify queue heads during completion callback */
 114         ep->stopped = 1;
 115         spin_unlock(&udc->lock);
 116
 117         usb_gadget_giveback_request(&ep->ep, &req->req);
 118
 119         spin_lock(&udc->lock);
 120
 121         ep->stopped = stopped;
 122 }
 123
 124 /*-----------------------------------------------------------------
 125  * nuke(): delete all requests related to this ep
 126  *--------------------------------------------------------------*/
 127 static void nuke(struct qe_ep *ep, int status)
 128 {
 129         /* Whether this eq has request linked */
 130         while (!list_empty(&ep->queue)) {
 131                 struct qe_req *req = NULL;
 132                 req = list_entry(ep->queue.next, struct qe_req, queue);
 133
 134                 done(ep, req, status);
 135         }
 136 }
 137
 138 /*---------------------------------------------------------------------------*
 139  * USB and Endpoint manipulate process, include parameter and register       *
 140  *---------------------------------------------------------------------------*/
 141 /* @value: 1--set stall 0--clean stall */
 142 static int qe_eprx_stall_change(struct qe_ep *ep, int value)
 143 {
 144         u16 tem_usep;
 145         u8 epnum = ep->epnum;
 146         struct qe_udc *udc = ep->udc;
 147
 148         tem_usep = in_be16(&udc->usb_regs->usb_usep[epnum]);
 149         tem_usep = tem_usep & ~USB_RHS_MASK;
 150         if (value == 1)
 151                 tem_usep |= USB_RHS_STALL;
 152         else if (ep->dir == USB_DIR_IN)
 153                 tem_usep |= USB_RHS_IGNORE_OUT;
 154
 155         out_be16(&udc->usb_regs->usb_usep[epnum], tem_usep);
 156         return 0;
 157 }
 158
 159 static int qe_eptx_stall_change(struct qe_ep *ep, int value)
 160 {
 161         u16 tem_usep;
 162         u8 epnum = ep->epnum;
 163         struct qe_udc *udc = ep->udc;
 164
 165         tem_usep = in_be16(&udc->usb_regs->usb_usep[epnum]);
 166         tem_usep = tem_usep & ~USB_THS_MASK;
 167         if (value == 1)
 168                 tem_usep |= USB_THS_STALL;
 169         else if (ep->dir == USB_DIR_OUT)
 170                 tem_usep |= USB_THS_IGNORE_IN;
 171
 172         out_be16(&udc->usb_regs->usb_usep[epnum], tem_usep);
 173
 174         return 0;
 175 }
 176
 177 static int qe_ep0_stall(struct qe_udc *udc)
 178 {
 179         qe_eptx_stall_change(&udc->eps[0], 1);
 180         qe_eprx_stall_change(&udc->eps[0], 1);
 181         udc->ep0_state = WAIT_FOR_SETUP;
 182         udc->ep0_dir = 0;
 183         return 0;
 184 }
 185
 186 static int qe_eprx_nack(struct qe_ep *ep)
 187 {
 188         u8 epnum = ep->epnum;
 189         struct qe_udc *udc = ep->udc;
 190
 191         if (ep->state == EP_STATE_IDLE) {
 192                 /* Set the ep's nack */
 193                 clrsetbits_be16(&udc->usb_regs->usb_usep[epnum],
 194                                 USB_RHS_MASK, USB_RHS_NACK);
 195
 196                 /* Mask Rx and Busy interrupts */
 197                 clrbits16(&udc->usb_regs->usb_usbmr,
 198                                 (USB_E_RXB_MASK | USB_E_BSY_MASK));
 199
 200                 ep->state = EP_STATE_NACK;
 201         }
 202         return 0;
 203 }
 204
 205 static int qe_eprx_normal(struct qe_ep *ep)
 206 {
 207         struct qe_udc *udc = ep->udc;
 208
 209         if (ep->state == EP_STATE_NACK) {
 210                 clrsetbits_be16(&udc->usb_regs->usb_usep[ep->epnum],
 211                                 USB_RTHS_MASK, USB_THS_IGNORE_IN);
 212
 213                 /* Unmask RX interrupts */
 214                 out_be16(&udc->usb_regs->usb_usber,
 215                                 USB_E_BSY_MASK | USB_E_RXB_MASK);
 216                 setbits16(&udc->usb_regs->usb_usbmr,
 217                                 (USB_E_RXB_MASK | USB_E_BSY_MASK));
 218
 219                 ep->state = EP_STATE_IDLE;
 220                 ep->has_data = 0;
 221         }
 222
 223         return 0;
 224 }
 225
 226 static int qe_ep_cmd_stoptx(struct qe_ep *ep)
 227 {
 228         if (ep->udc->soc_type == PORT_CPM)
 229                 cpm_command(CPM_USB_STOP_TX | (ep->epnum << CPM_USB_EP_SHIFT),
 230                                 CPM_USB_STOP_TX_OPCODE);
 231         else
 232                 qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB,
 233                                 ep->epnum, 0);
 234
 235         return 0;
 236 }
 237
 238 static int qe_ep_cmd_restarttx(struct qe_ep *ep)
 239 {
 240         if (ep->udc->soc_type == PORT_CPM)
 241                 cpm_command(CPM_USB_RESTART_TX | (ep->epnum <<
 242                                 CPM_USB_EP_SHIFT), CPM_USB_RESTART_TX_OPCODE);
 243         else
 244                 qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB,
 245                                 ep->epnum, 0);
 246
 247         return 0;
 248 }
 249
 250 static int qe_ep_flushtxfifo(struct qe_ep *ep)
 251 {
 252         struct qe_udc *udc = ep->udc;
 253         int i;
 254
 255         i = (int)ep->epnum;
 256
 257         qe_ep_cmd_stoptx(ep);
 258         out_8(&udc->usb_regs->usb_uscom,
 259                 USB_CMD_FLUSH_FIFO | (USB_CMD_EP_MASK & (ep->epnum)));
 260         out_be16(&udc->ep_param[i]->tbptr, in_be16(&udc->ep_param[i]->tbase));
 261         out_be32(&udc->ep_param[i]->tstate, 0);
 262         out_be16(&udc->ep_param[i]->tbcnt, 0);
 263
 264         ep->c_txbd = ep->txbase;
 265         ep->n_txbd = ep->txbase;
 266         qe_ep_cmd_restarttx(ep);
 267         return 0;
 268 }
 269
 270 static int qe_ep_filltxfifo(struct qe_ep *ep)
 271 {
 272         struct qe_udc *udc = ep->udc;
 273
 274         out_8(&udc->usb_regs->usb_uscom,
 275                         USB_CMD_STR_FIFO | (USB_CMD_EP_MASK & (ep->epnum)));
 276         return 0;
 277 }
 278
 279 static int qe_epbds_reset(struct qe_udc *udc, int pipe_num)
 280 {
 281         struct qe_ep *ep;
 282         u32 bdring_len;
 283         struct qe_bd __iomem *bd;
 284         int i;
 285
 286         ep = &udc->eps[pipe_num];
 287
 288         if (ep->dir == USB_DIR_OUT)
 289                 bdring_len = USB_BDRING_LEN_RX;
 290         else
 291                 bdring_len = USB_BDRING_LEN;
 292
 293         bd = ep->rxbase;
 294         for (i = 0; i < (bdring_len - 1); i++) {
 295                 out_be32((u32 __iomem *)bd, R_E | R_I);
 296                 bd++;
 297         }
 298         out_be32((u32 __iomem *)bd, R_E | R_I | R_W);
 299
 300         bd = ep->txbase;
 301         for (i = 0; i < USB_BDRING_LEN_TX - 1; i++) {
 302                 out_be32(&bd->buf, 0);
 303                 out_be32((u32 __iomem *)bd, 0);
 304                 bd++;
 305         }
 306         out_be32((u32 __iomem *)bd, T_W);
 307
 308         return 0;
 309 }
 310
 311 static int qe_ep_reset(struct qe_udc *udc, int pipe_num)
 312 {
 313         struct qe_ep *ep;
 314         u16 tmpusep;
 315
 316         ep = &udc->eps[pipe_num];
 317         tmpusep = in_be16(&udc->usb_regs->usb_usep[pipe_num]);
 318         tmpusep &= ~USB_RTHS_MASK;
 319
 320         switch (ep->dir) {
 321         case USB_DIR_BOTH:
 322                 qe_ep_flushtxfifo(ep);
 323                 break;
 324         case USB_DIR_OUT:
 325                 tmpusep |= USB_THS_IGNORE_IN;
 326                 break;
 327         case USB_DIR_IN:
 328                 qe_ep_flushtxfifo(ep);
 329                 tmpusep |= USB_RHS_IGNORE_OUT;
 330                 break;
 331         default:
 332                 break;
 333         }
 334         out_be16(&udc->usb_regs->usb_usep[pipe_num], tmpusep);
 335
 336         qe_epbds_reset(udc, pipe_num);
 337
 338         return 0;
 339 }
 340
 341 static int qe_ep_toggledata01(struct qe_ep *ep)
 342 {
 343         ep->data01 ^= 0x1;
 344         return 0;
 345 }
 346
 347 static int qe_ep_bd_init(struct qe_udc *udc, unsigned char pipe_num)
 348 {
 349         struct qe_ep *ep = &udc->eps[pipe_num];
 350         unsigned long tmp_addr = 0;
 351         struct usb_ep_para __iomem *epparam;
 352         int i;
 353         struct qe_bd __iomem *bd;
 354         int bdring_len;
 355
 356         if (ep->dir == USB_DIR_OUT)
 357                 bdring_len = USB_BDRING_LEN_RX;
 358         else
 359                 bdring_len = USB_BDRING_LEN;
 360
 361         epparam = udc->ep_param[pipe_num];
 362         /* alloc multi-ram for BD rings and set the ep parameters */
 363         tmp_addr = cpm_muram_alloc(sizeof(struct qe_bd) * (bdring_len +
 364                                 USB_BDRING_LEN_TX), QE_ALIGNMENT_OF_BD);
 365         if (IS_ERR_VALUE(tmp_addr))
 366                 return -ENOMEM;
 367
 368         out_be16(&epparam->rbase, (u16)tmp_addr);
 369         out_be16(&epparam->tbase, (u16)(tmp_addr +
 370                                 (sizeof(struct qe_bd) * bdring_len)));
 371
 372         out_be16(&epparam->rbptr, in_be16(&epparam->rbase));
 373         out_be16(&epparam->tbptr, in_be16(&epparam->tbase));
 374
 375         ep->rxbase = cpm_muram_addr(tmp_addr);
 376         ep->txbase = cpm_muram_addr(tmp_addr + (sizeof(struct qe_bd)
 377                                 * bdring_len));
 378         ep->n_rxbd = ep->rxbase;
 379         ep->e_rxbd = ep->rxbase;
 380         ep->n_txbd = ep->txbase;
 381         ep->c_txbd = ep->txbase;
 382         ep->data01 = 0; /* data0 */
 383
 384         /* Init TX and RX bds */
 385         bd = ep->rxbase;
 386         for (i = 0; i < bdring_len - 1; i++) {
 387                 out_be32(&bd->buf, 0);
 388                 out_be32((u32 __iomem *)bd, 0);
 389                 bd++;
 390         }
 391         out_be32(&bd->buf, 0);
 392         out_be32((u32 __iomem *)bd, R_W);
 393
 394         bd = ep->txbase;
 395         for (i = 0; i < USB_BDRING_LEN_TX - 1; i++) {
 396                 out_be32(&bd->buf, 0);
 397                 out_be32((u32 __iomem *)bd, 0);
 398                 bd++;
 399         }
 400         out_be32(&bd->buf, 0);
 401         out_be32((u32 __iomem *)bd, T_W);
 402
 403         return 0;
 404 }
 405
 406 static int qe_ep_rxbd_update(struct qe_ep *ep)
 407 {
 408         unsigned int size;
 409         int i;
 410         unsigned int tmp;
 411         struct qe_bd __iomem *bd;
 412         unsigned int bdring_len;
 413
 414         if (ep->rxbase == NULL)
 415                 return -EINVAL;
 416
 417         bd = ep->rxbase;
 418
 419         ep->rxframe = kmalloc(sizeof(*ep->rxframe), GFP_ATOMIC);
 420         if (!ep->rxframe)
 421                 return -ENOMEM;
 422
 423         qe_frame_init(ep->rxframe);
 424
 425         if (ep->dir == USB_DIR_OUT)
 426                 bdring_len = USB_BDRING_LEN_RX;
 427         else
 428                 bdring_len = USB_BDRING_LEN;
 429
 430         size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (bdring_len + 1);
 431         ep->rxbuffer = kzalloc(size, GFP_ATOMIC);
 432         if (!ep->rxbuffer) {
 433                 kfree(ep->rxframe);
 434                 return -ENOMEM;
 435         }
 436
 437         ep->rxbuf_d = virt_to_phys((void *)ep->rxbuffer);
 438         if (ep->rxbuf_d == DMA_ADDR_INVALID) {
 439                 ep->rxbuf_d = dma_map_single(ep->udc->gadget.dev.parent,
 440                                         ep->rxbuffer,
 441                                         size,
 442                                         DMA_FROM_DEVICE);
 443                 ep->rxbufmap = 1;
 444         } else {
 445                 dma_sync_single_for_device(ep->udc->gadget.dev.parent,
 446                                         ep->rxbuf_d, size,
 447                                         DMA_FROM_DEVICE);
 448                 ep->rxbufmap = 0;
 449         }
 450
 451         size = ep->ep.maxpacket + USB_CRC_SIZE + 2;
 452         tmp = ep->rxbuf_d;
 453         tmp = (u32)(((tmp >> 2) << 2) + 4);
 454
 455         for (i = 0; i < bdring_len - 1; i++) {
 456                 out_be32(&bd->buf, tmp);
 457                 out_be32((u32 __iomem *)bd, (R_E | R_I));
 458                 tmp = tmp + size;
 459                 bd++;
 460         }
 461         out_be32(&bd->buf, tmp);
 462         out_be32((u32 __iomem *)bd, (R_E | R_I | R_W));
 463
 464         return 0;
 465 }
 466
 467 static int qe_ep_register_init(struct qe_udc *udc, unsigned char pipe_num)
 468 {
 469         struct qe_ep *ep = &udc->eps[pipe_num];
 470         struct usb_ep_para __iomem *epparam;
 471         u16 usep, logepnum;
 472         u16 tmp;
 473         u8 rtfcr = 0;
 474
 475         epparam = udc->ep_param[pipe_num];
 476
 477         usep = 0;
 478         logepnum = (ep->ep.desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 479         usep |= (logepnum << USB_EPNUM_SHIFT);
 480
 481         switch (ep->ep.desc->bmAttributes & 0x03) {
 482         case USB_ENDPOINT_XFER_BULK:
 483                 usep |= USB_TRANS_BULK;
 484                 break;
 485         case USB_ENDPOINT_XFER_ISOC:
 486                 usep |=  USB_TRANS_ISO;
 487                 break;
 488         case USB_ENDPOINT_XFER_INT:
 489                 usep |= USB_TRANS_INT;
 490                 break;
 491         default:
 492                 usep |= USB_TRANS_CTR;
 493                 break;
 494         }
 495
 496         switch (ep->dir) {
 497         case USB_DIR_OUT:
 498                 usep |= USB_THS_IGNORE_IN;
 499                 break;
 500         case USB_DIR_IN:
 501                 usep |= USB_RHS_IGNORE_OUT;
 502                 break;
 503         default:
 504                 break;
 505         }
 506         out_be16(&udc->usb_regs->usb_usep[pipe_num], usep);
 507
 508         rtfcr = 0x30;
 509         out_8(&epparam->rbmr, rtfcr);
 510         out_8(&epparam->tbmr, rtfcr);
 511
 512         tmp = (u16)(ep->ep.maxpacket + USB_CRC_SIZE);
 513         /* MRBLR must be divisble by 4 */
 514         tmp = (u16)(((tmp >> 2) << 2) + 4);
 515         out_be16(&epparam->mrblr, tmp);
 516
 517         return 0;
 518 }
 519
 520 static int qe_ep_init(struct qe_udc *udc,
 521                       unsigned char pipe_num,
 522                       const struct usb_endpoint_descriptor *desc)
 523 {
 524         struct qe_ep *ep = &udc->eps[pipe_num];
 525         unsigned long flags;
 526         int reval = 0;
 527         u16 max = 0;
 528
 529         max = usb_endpoint_maxp(desc);
 530
 531         /* check the max package size validate for this endpoint */
 532         /* Refer to USB2.0 spec table 9-13,
 533         */
 534         if (pipe_num != 0) {
 535                 switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
 536                 case USB_ENDPOINT_XFER_BULK:
 537                         if (strstr(ep->ep.name, "-iso")
 538                                         || strstr(ep->ep.name, "-int"))
 539                                 goto en_done;
 540                         switch (udc->gadget.speed) {
 541                         case USB_SPEED_HIGH:
 542                         if ((max == 128) || (max == 256) || (max == 512))
 543                                 break;
 544                         fallthrough;
 545                         default:
 546                                 switch (max) {
 547                                 case 4:
 548                                 case 8:
 549                                 case 16:
 550                                 case 32:
 551                                 case 64:
 552                                         break;
 553                                 default:
 554                                 case USB_SPEED_LOW:
 555                                         goto en_done;
 556                                 }
 557                         }
 558                         break;
 559                 case USB_ENDPOINT_XFER_INT:
 560                         if (strstr(ep->ep.name, "-iso"))        /* bulk is ok */
 561                                 goto en_done;
 562                         switch (udc->gadget.speed) {
 563                         case USB_SPEED_HIGH:
 564                                 if (max <= 1024)
 565                                         break;
 566                                 fallthrough;
 567                         case USB_SPEED_FULL:
 568                                 if (max <= 64)
 569                                         break;
 570                                 fallthrough;
 571                         default:
 572                                 if (max <= 8)
 573                                         break;
 574                                 goto en_done;
 575                         }
 576                         break;
 577                 case USB_ENDPOINT_XFER_ISOC:
 578                         if (strstr(ep->ep.name, "-bulk")
 579                                 || strstr(ep->ep.name, "-int"))
 580                                 goto en_done;
 581                         switch (udc->gadget.speed) {
 582                         case USB_SPEED_HIGH:
 583                                 if (max <= 1024)
 584                                         break;
 585                                 fallthrough;
 586                         case USB_SPEED_FULL:
 587                                 if (max <= 1023)
 588                                         break;
 589                                 fallthrough;
 590                         default:
 591                                 goto en_done;
 592                         }
 593                         break;
 594                 case USB_ENDPOINT_XFER_CONTROL:
 595                         if (strstr(ep->ep.name, "-iso")
 596                                 || strstr(ep->ep.name, "-int"))
 597                                 goto en_done;
 598                         switch (udc->gadget.speed) {
 599                         case USB_SPEED_HIGH:
 600                         case USB_SPEED_FULL:
 601                                 switch (max) {
 602                                 case 1:
 603                                 case 2:
 604                                 case 4:
 605                                 case 8:
 606                                 case 16:
 607                                 case 32:
 608                                 case 64:
 609                                         break;
 610                                 default:
 611                                         goto en_done;
 612                                 }
 613                                 fallthrough;
 614                         case USB_SPEED_LOW:
 615                                 switch (max) {
 616                                 case 1:
 617                                 case 2:
 618                                 case 4:
 619                                 case 8:
 620                                         break;
 621                                 default:
 622                                         goto en_done;
 623                                 }
 624                         default:
 625                                 goto en_done;
 626                         }
 627                         break;
 628
 629                 default:
 630                         goto en_done;
 631                 }
 632         } /* if ep0*/
 633
 634         spin_lock_irqsave(&udc->lock, flags);
 635
 636         /* initialize ep structure */
 637         ep->ep.maxpacket = max;
 638         ep->tm = (u8)(desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
 639         ep->ep.desc = desc;
 640         ep->stopped = 0;
 641         ep->init = 1;
 642
 643         if (pipe_num == 0) {
 644                 ep->dir = USB_DIR_BOTH;
 645                 udc->ep0_dir = USB_DIR_OUT;
 646                 udc->ep0_state = WAIT_FOR_SETUP;
 647         } else  {
 648                 switch (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) {
 649                 case USB_DIR_OUT:
 650                         ep->dir = USB_DIR_OUT;
 651                         break;
 652                 case USB_DIR_IN:
 653                         ep->dir = USB_DIR_IN;
 654                 default:
 655                         break;
 656                 }
 657         }
 658
 659         /* hardware special operation */
 660         qe_ep_bd_init(udc, pipe_num);
 661         if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_OUT)) {
 662                 reval = qe_ep_rxbd_update(ep);
 663                 if (reval)
 664                         goto en_done1;
 665         }
 666
 667         if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_IN)) {
 668                 ep->txframe = kmalloc(sizeof(*ep->txframe), GFP_ATOMIC);
 669                 if (!ep->txframe)
 670                         goto en_done2;
 671                 qe_frame_init(ep->txframe);
 672         }
 673
 674         qe_ep_register_init(udc, pipe_num);
 675
 676         /* Now HW will be NAKing transfers to that EP,
 677          * until a buffer is queued to it. */
 678         spin_unlock_irqrestore(&udc->lock, flags);
 679
 680         return 0;
 681 en_done2:
 682         kfree(ep->rxbuffer);
 683         kfree(ep->rxframe);
 684 en_done1:
 685         spin_unlock_irqrestore(&udc->lock, flags);
 686 en_done:
 687         dev_err(udc->dev, "failed to initialize %s\n", ep->ep.name);
 688         return -ENODEV;
 689 }
 690
 691 static inline void qe_usb_enable(struct qe_udc *udc)
 692 {
 693         setbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN);
 694 }
 695
 696 static inline void qe_usb_disable(struct qe_udc *udc)
 697 {
 698         clrbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN);
 699 }
 700
 701 /*----------------------------------------------------------------------------*
 702  *              USB and EP basic manipulate function end                      *
 703  *----------------------------------------------------------------------------*/
 704
 705
 706 /******************************************************************************
 707                 UDC transmit and receive process
 708  ******************************************************************************/
 709 static void recycle_one_rxbd(struct qe_ep *ep)
 710 {
 711         u32 bdstatus;
 712
 713         bdstatus = in_be32((u32 __iomem *)ep->e_rxbd);
 714         bdstatus = R_I | R_E | (bdstatus & R_W);
 715         out_be32((u32 __iomem *)ep->e_rxbd, bdstatus);
 716
 717         if (bdstatus & R_W)
 718                 ep->e_rxbd = ep->rxbase;
 719         else
 720                 ep->e_rxbd++;
 721 }
 722
 723 static void recycle_rxbds(struct qe_ep *ep, unsigned char stopatnext)
 724 {
 725         u32 bdstatus;
 726         struct qe_bd __iomem *bd, *nextbd;
 727         unsigned char stop = 0;
 728
 729         nextbd = ep->n_rxbd;
 730         bd = ep->e_rxbd;
 731         bdstatus = in_be32((u32 __iomem *)bd);
 732
 733         while (!(bdstatus & R_E) && !(bdstatus & BD_LENGTH_MASK) && !stop) {
 734                 bdstatus = R_E | R_I | (bdstatus & R_W);
 735                 out_be32((u32 __iomem *)bd, bdstatus);
 736
 737                 if (bdstatus & R_W)
 738                         bd = ep->rxbase;
 739                 else
 740                         bd++;
 741
 742                 bdstatus = in_be32((u32 __iomem *)bd);
 743                 if (stopatnext && (bd == nextbd))
 744                         stop = 1;
 745         }
 746
 747         ep->e_rxbd = bd;
 748 }
 749
 750 static void ep_recycle_rxbds(struct qe_ep *ep)
 751 {
 752         struct qe_bd __iomem *bd = ep->n_rxbd;
 753         u32 bdstatus;
 754         u8 epnum = ep->epnum;
 755         struct qe_udc *udc = ep->udc;
 756
 757         bdstatus = in_be32((u32 __iomem *)bd);
 758         if (!(bdstatus & R_E) && !(bdstatus & BD_LENGTH_MASK)) {
 759                 bd = ep->rxbase +
 760                                 ((in_be16(&udc->ep_param[epnum]->rbptr) -
 761                                   in_be16(&udc->ep_param[epnum]->rbase))
 762                                  >> 3);
 763                 bdstatus = in_be32((u32 __iomem *)bd);
 764
 765                 if (bdstatus & R_W)
 766                         bd = ep->rxbase;
 767                 else
 768                         bd++;
 769
 770                 ep->e_rxbd = bd;
 771                 recycle_rxbds(ep, 0);
 772                 ep->e_rxbd = ep->n_rxbd;
 773         } else
 774                 recycle_rxbds(ep, 1);
 775
 776         if (in_be16(&udc->usb_regs->usb_usber) & USB_E_BSY_MASK)
 777                 out_be16(&udc->usb_regs->usb_usber, USB_E_BSY_MASK);
 778
 779         if (ep->has_data <= 0 && (!list_empty(&ep->queue)))
 780                 qe_eprx_normal(ep);
 781
 782         ep->localnack = 0;
 783 }
 784
 785 static void setup_received_handle(struct qe_udc *udc,
 786                                         struct usb_ctrlrequest *setup);
 787 static int qe_ep_rxframe_handle(struct qe_ep *ep);
 788 static void ep0_req_complete(struct qe_udc *udc, struct qe_req *req);
 789 /* when BD PID is setup, handle the packet */
 790 static int ep0_setup_handle(struct qe_udc *udc)
 791 {
 792         struct qe_ep *ep = &udc->eps[0];
 793         struct qe_frame *pframe;
 794         unsigned int fsize;
 795         u8 *cp;
 796
 797         pframe = ep->rxframe;
 798         if ((frame_get_info(pframe) & PID_SETUP)
 799                         && (udc->ep0_state == WAIT_FOR_SETUP)) {
 800                 fsize = frame_get_length(pframe);
 801                 if (unlikely(fsize != 8))
 802                         return -EINVAL;
 803                 cp = (u8 *)&udc->local_setup_buff;
 804                 memcpy(cp, pframe->data, fsize);
 805                 ep->data01 = 1;
 806
 807                 /* handle the usb command base on the usb_ctrlrequest */
 808                 setup_received_handle(udc, &udc->local_setup_buff);
 809                 return 0;
 810         }
 811         return -EINVAL;
 812 }
 813
 814 static int qe_ep0_rx(struct qe_udc *udc)
 815 {
 816         struct qe_ep *ep = &udc->eps[0];
 817         struct qe_frame *pframe;
 818         struct qe_bd __iomem *bd;
 819         u32 bdstatus, length;
 820         u32 vaddr;
 821
 822         pframe = ep->rxframe;
 823
 824         if (ep->dir == USB_DIR_IN) {
 825                 dev_err(udc->dev, "ep0 not a control endpoint\n");
 826                 return -EINVAL;
 827         }
 828
 829         bd = ep->n_rxbd;
 830         bdstatus = in_be32((u32 __iomem *)bd);
 831         length = bdstatus & BD_LENGTH_MASK;
 832
 833         while (!(bdstatus & R_E) && length) {
 834                 if ((bdstatus & R_F) && (bdstatus & R_L)
 835                         && !(bdstatus & R_ERROR)) {
 836                         if (length == USB_CRC_SIZE) {
 837                                 udc->ep0_state = WAIT_FOR_SETUP;
 838                                 dev_vdbg(udc->dev,
 839                                         "receive a ZLP in status phase\n");
 840                         } else {
 841                                 qe_frame_clean(pframe);
 842                                 vaddr = (u32)phys_to_virt(in_be32(&bd->buf));
 843                                 frame_set_data(pframe, (u8 *)vaddr);
 844                                 frame_set_length(pframe,
 845                                                 (length - USB_CRC_SIZE));
 846                                 frame_set_status(pframe, FRAME_OK);
 847                                 switch (bdstatus & R_PID) {
 848                                 case R_PID_SETUP:
 849                                         frame_set_info(pframe, PID_SETUP);
 850                                         break;
 851                                 case R_PID_DATA1:
 852                                         frame_set_info(pframe, PID_DATA1);
 853                                         break;
 854                                 default:
 855                                         frame_set_info(pframe, PID_DATA0);
 856                                         break;
 857                                 }
 858
 859                                 if ((bdstatus & R_PID) == R_PID_SETUP)
 860                                         ep0_setup_handle(udc);
 861                                 else
 862                                         qe_ep_rxframe_handle(ep);
 863                         }
 864                 } else {
 865                         dev_err(udc->dev, "The receive frame with error!\n");
 866                 }
 867
 868                 /* note: don't clear the rxbd's buffer address */
 869                 recycle_one_rxbd(ep);
 870
 871                 /* Get next BD */
 872                 if (bdstatus & R_W)
 873                         bd = ep->rxbase;
 874                 else
 875                         bd++;
 876
 877                 bdstatus = in_be32((u32 __iomem *)bd);
 878                 length = bdstatus & BD_LENGTH_MASK;
 879
 880         }
 881
 882         ep->n_rxbd = bd;
 883
 884         return 0;
 885 }
 886
 887 static int qe_ep_rxframe_handle(struct qe_ep *ep)
 888 {
 889         struct qe_frame *pframe;
 890         u8 framepid = 0;
 891         unsigned int fsize;
 892         u8 *cp;
 893         struct qe_req *req;
 894
 895         pframe = ep->rxframe;
 896
 897         if (frame_get_info(pframe) & PID_DATA1)
 898                 framepid = 0x1;
 899
 900         if (framepid != ep->data01) {
 901                 dev_err(ep->udc->dev, "the data01 error!\n");
 902                 return -EIO;
 903         }
 904
 905         fsize = frame_get_length(pframe);
 906         if (list_empty(&ep->queue)) {
 907                 dev_err(ep->udc->dev, "the %s have no requeue!\n", ep->name);
 908         } else {
 909                 req = list_entry(ep->queue.next, struct qe_req, queue);
 910
 911                 cp = (u8 *)(req->req.buf) + req->req.actual;
 912                 if (cp) {
 913                         memcpy(cp, pframe->data, fsize);
 914                         req->req.actual += fsize;
 915                         if ((fsize < ep->ep.maxpacket) ||
 916                                         (req->req.actual >= req->req.length)) {
 917                                 if (ep->epnum == 0)
 918                                         ep0_req_complete(ep->udc, req);
 919                                 else
 920                                         done(ep, req, 0);
 921                                 if (list_empty(&ep->queue) && ep->epnum != 0)
 922                                         qe_eprx_nack(ep);
 923                         }
 924                 }
 925         }
 926
 927         qe_ep_toggledata01(ep);
 928
 929         return 0;
 930 }
 931
 932 static void ep_rx_tasklet(struct tasklet_struct *t)
 933 {
 934         struct qe_udc *udc = from_tasklet(udc, t, rx_tasklet);
 935         struct qe_ep *ep;
 936         struct qe_frame *pframe;
 937         struct qe_bd __iomem *bd;
 938         unsigned long flags;
 939         u32 bdstatus, length;
 940         u32 vaddr, i;
 941
 942         spin_lock_irqsave(&udc->lock, flags);
 943
 944         for (i = 1; i < USB_MAX_ENDPOINTS; i++) {
 945                 ep = &udc->eps[i];
 946
 947                 if (ep->dir == USB_DIR_IN || ep->enable_tasklet == 0) {
 948                         dev_dbg(udc->dev,
 949                                 "This is a transmit ep or disable tasklet!\n");
 950                         continue;
 951                 }
 952
 953                 pframe = ep->rxframe;
 954                 bd = ep->n_rxbd;
 955                 bdstatus = in_be32((u32 __iomem *)bd);
 956                 length = bdstatus & BD_LENGTH_MASK;
 957
 958                 while (!(bdstatus & R_E) && length) {
 959                         if (list_empty(&ep->queue)) {
 960                                 qe_eprx_nack(ep);
 961                                 dev_dbg(udc->dev,
 962                                         "The rxep have noreq %d\n",
 963                                         ep->has_data);
 964                                 break;
 965                         }
 966
 967                         if ((bdstatus & R_F) && (bdstatus & R_L)
 968                                 && !(bdstatus & R_ERROR)) {
 969                                 qe_frame_clean(pframe);
 970                                 vaddr = (u32)phys_to_virt(in_be32(&bd->buf));
 971                                 frame_set_data(pframe, (u8 *)vaddr);
 972                                 frame_set_length(pframe,
 973                                                 (length - USB_CRC_SIZE));
 974                                 frame_set_status(pframe, FRAME_OK);
 975                                 switch (bdstatus & R_PID) {
 976                                 case R_PID_DATA1:
 977                                         frame_set_info(pframe, PID_DATA1);
 978                                         break;
 979                                 case R_PID_SETUP:
 980                                         frame_set_info(pframe, PID_SETUP);
 981                                         break;
 982                                 default:
 983                                         frame_set_info(pframe, PID_DATA0);
 984                                         break;
 985                                 }
 986                                 /* handle the rx frame */
 987                                 qe_ep_rxframe_handle(ep);
 988                         } else {
 989                                 dev_err(udc->dev,
 990                                         "error in received frame\n");
 991                         }
 992                         /* note: don't clear the rxbd's buffer address */
 993                         /*clear the length */
 994                         out_be32((u32 __iomem *)bd, bdstatus & BD_STATUS_MASK);
 995                         ep->has_data--;
 996                         if (!(ep->localnack))
 997                                 recycle_one_rxbd(ep);
 998
 999                         /* Get next BD */
1000                         if (bdstatus & R_W)
1001                                 bd = ep->rxbase;
1002                         else
1003                                 bd++;
1004
1005                         bdstatus = in_be32((u32 __iomem *)bd);
1006                         length = bdstatus & BD_LENGTH_MASK;
1007                 }
1008
1009                 ep->n_rxbd = bd;
1010
1011                 if (ep->localnack)
1012                         ep_recycle_rxbds(ep);
1013
1014                 ep->enable_tasklet = 0;
1015         } /* for i=1 */
1016
1017         spin_unlock_irqrestore(&udc->lock, flags);
1018 }
1019
1020 static int qe_ep_rx(struct qe_ep *ep)
1021 {
1022         struct qe_udc *udc;
1023         struct qe_frame *pframe;
1024         struct qe_bd __iomem *bd;
1025         u16 swoffs, ucoffs, emptybds;
1026
1027         udc = ep->udc;
1028         pframe = ep->rxframe;
1029
1030         if (ep->dir == USB_DIR_IN) {
1031                 dev_err(udc->dev, "transmit ep in rx function\n");
1032                 return -EINVAL;
1033         }
1034
1035         bd = ep->n_rxbd;
1036
1037         swoffs = (u16)(bd - ep->rxbase);
1038         ucoffs = (u16)((in_be16(&udc->ep_param[ep->epnum]->rbptr) -
1039                         in_be16(&udc->ep_param[ep->epnum]->rbase)) >> 3);
1040         if (swoffs < ucoffs)
1041                 emptybds = USB_BDRING_LEN_RX - ucoffs + swoffs;
1042         else
1043                 emptybds = swoffs - ucoffs;
1044
1045         if (emptybds < MIN_EMPTY_BDS) {
1046                 qe_eprx_nack(ep);
1047                 ep->localnack = 1;
1048                 dev_vdbg(udc->dev, "%d empty bds, send NACK\n", emptybds);
1049         }
1050         ep->has_data = USB_BDRING_LEN_RX - emptybds;
1051
1052         if (list_empty(&ep->queue)) {
1053                 qe_eprx_nack(ep);
1054                 dev_vdbg(udc->dev, "The rxep have no req queued with %d BDs\n",
1055                                 ep->has_data);
1056                 return 0;
1057         }
1058
1059         tasklet_schedule(&udc->rx_tasklet);
1060         ep->enable_tasklet = 1;
1061
1062         return 0;
1063 }
1064
1065 /* send data from a frame, no matter what tx_req */
1066 static int qe_ep_tx(struct qe_ep *ep, struct qe_frame *frame)
1067 {
1068         struct qe_udc *udc = ep->udc;
1069         struct qe_bd __iomem *bd;
1070         u16 saveusbmr;
1071         u32 bdstatus, pidmask;
1072         u32 paddr;
1073
1074         if (ep->dir == USB_DIR_OUT) {
1075                 dev_err(udc->dev, "receive ep passed to tx function\n");
1076                 return -EINVAL;
1077         }
1078
1079         /* Disable the Tx interrupt */
1080         saveusbmr = in_be16(&udc->usb_regs->usb_usbmr);
1081         out_be16(&udc->usb_regs->usb_usbmr,
1082                         saveusbmr & ~(USB_E_TXB_MASK | USB_E_TXE_MASK));
1083
1084         bd = ep->n_txbd;
1085         bdstatus = in_be32((u32 __iomem *)bd);
1086
1087         if (!(bdstatus & (T_R | BD_LENGTH_MASK))) {
1088                 if (frame_get_length(frame) == 0) {
1089                         frame_set_data(frame, udc->nullbuf);
1090                         frame_set_length(frame, 2);
1091                         frame->info |= (ZLP | NO_CRC);
1092                         dev_vdbg(udc->dev, "the frame size = 0\n");
1093                 }
1094                 paddr = virt_to_phys((void *)frame->data);
1095                 out_be32(&bd->buf, paddr);
1096                 bdstatus = (bdstatus&T_W);
1097                 if (!(frame_get_info(frame) & NO_CRC))
1098                         bdstatus |= T_R | T_I | T_L | T_TC
1099                                         | frame_get_length(frame);
1100                 else
1101                         bdstatus |= T_R | T_I | T_L | frame_get_length(frame);
1102
1103                 /* if the packet is a ZLP in status phase */
1104                 if ((ep->epnum == 0) && (udc->ep0_state == DATA_STATE_NEED_ZLP))
1105                         ep->data01 = 0x1;
1106
1107                 if (ep->data01) {
1108                         pidmask = T_PID_DATA1;
1109                         frame->info |= PID_DATA1;
1110                 } else {
1111                         pidmask = T_PID_DATA0;
1112                         frame->info |= PID_DATA0;
1113                 }
1114                 bdstatus |= T_CNF;
1115                 bdstatus |= pidmask;
1116                 out_be32((u32 __iomem *)bd, bdstatus);
1117                 qe_ep_filltxfifo(ep);
1118
1119                 /* enable the TX interrupt */
1120                 out_be16(&udc->usb_regs->usb_usbmr, saveusbmr);
1121
1122                 qe_ep_toggledata01(ep);
1123                 if (bdstatus & T_W)
1124                         ep->n_txbd = ep->txbase;
1125                 else
1126                         ep->n_txbd++;
1127
1128                 return 0;
1129         } else {
1130                 out_be16(&udc->usb_regs->usb_usbmr, saveusbmr);
1131                 dev_vdbg(udc->dev, "The tx bd is not ready!\n");
1132                 return -EBUSY;
1133         }
1134 }
1135
1136 /* when a bd was transmitted, the function can
1137  * handle the tx_req, not include ep0           */
1138 static int txcomplete(struct qe_ep *ep, unsigned char restart)
1139 {
1140         if (ep->tx_req != NULL) {
1141                 struct qe_req *req = ep->tx_req;
1142                 unsigned zlp = 0, last_len = 0;
1143
1144                 last_len = min_t(unsigned, req->req.length - ep->sent,
1145                                 ep->ep.maxpacket);
1146
1147                 if (!restart) {
1148                         int asent = ep->last;
1149                         ep->sent += asent;
1150                         ep->last -= asent;
1151                 } else {
1152                         ep->last = 0;
1153                 }
1154
1155                 /* zlp needed when req->re.zero is set */
1156                 if (req->req.zero) {
1157                         if (last_len == 0 ||
1158                                 (req->req.length % ep->ep.maxpacket) != 0)
1159                                 zlp = 0;
1160                         else
1161                                 zlp = 1;
1162                 } else
1163                         zlp = 0;
1164
1165                 /* a request already were transmitted completely */
1166                 if (((ep->tx_req->req.length - ep->sent) <= 0) && !zlp) {
1167                         done(ep, ep->tx_req, 0);
1168                         ep->tx_req = NULL;
1169                         ep->last = 0;
1170                         ep->sent = 0;
1171                 }
1172         }
1173
1174         /* we should gain a new tx_req fot this endpoint */
1175         if (ep->tx_req == NULL) {
1176                 if (!list_empty(&ep->queue)) {
1177                         ep->tx_req = list_entry(ep->queue.next, struct qe_req,
1178                                                         queue);
1179                         ep->last = 0;
1180                         ep->sent = 0;
1181                 }
1182         }
1183
1184         return 0;
1185 }
1186
1187 /* give a frame and a tx_req, send some data */
1188 static int qe_usb_senddata(struct qe_ep *ep, struct qe_frame *frame)
1189 {
1190         unsigned int size;
1191         u8 *buf;
1192
1193         qe_frame_clean(frame);
1194         size = min_t(u32, (ep->tx_req->req.length - ep->sent),
1195                                 ep->ep.maxpacket);
1196         buf = (u8 *)ep->tx_req->req.buf + ep->sent;
1197         if (buf && size) {
1198                 ep->last = size;
1199                 ep->tx_req->req.actual += size;
1200                 frame_set_data(frame, buf);
1201                 frame_set_length(frame, size);
1202                 frame_set_status(frame, FRAME_OK);
1203                 frame_set_info(frame, 0);
1204                 return qe_ep_tx(ep, frame);
1205         }
1206         return -EIO;
1207 }
1208
1209 /* give a frame struct,send a ZLP */
1210 static int sendnulldata(struct qe_ep *ep, struct qe_frame *frame, uint infor)
1211 {
1212         struct qe_udc *udc = ep->udc;
1213
1214         if (frame == NULL)
1215                 return -ENODEV;
1216
1217         qe_frame_clean(frame);
1218         frame_set_data(frame, (u8 *)udc->nullbuf);
1219         frame_set_length(frame, 2);
1220         frame_set_status(frame, FRAME_OK);
1221         frame_set_info(frame, (ZLP | NO_CRC | infor));
1222
1223         return qe_ep_tx(ep, frame);
1224 }
1225
1226 static int frame_create_tx(struct qe_ep *ep, struct qe_frame *frame)
1227 {
1228         struct qe_req *req = ep->tx_req;
1229         int reval;
1230
1231         if (req == NULL)
1232                 return -ENODEV;
1233
1234         if ((req->req.length - ep->sent) > 0)
1235                 reval = qe_usb_senddata(ep, frame);
1236         else
1237                 reval = sendnulldata(ep, frame, 0);
1238
1239         return reval;
1240 }
1241
1242 /* if direction is DIR_IN, the status is Device->Host
1243  * if direction is DIR_OUT, the status transaction is Device<-Host
1244  * in status phase, udc create a request and gain status */
1245 static int ep0_prime_status(struct qe_udc *udc, int direction)
1246 {
1247
1248         struct qe_ep *ep = &udc->eps[0];
1249
1250         if (direction == USB_DIR_IN) {
1251                 udc->ep0_state = DATA_STATE_NEED_ZLP;
1252                 udc->ep0_dir = USB_DIR_IN;
1253                 sendnulldata(ep, ep->txframe, SETUP_STATUS | NO_REQ);
1254         } else {
1255                 udc->ep0_dir = USB_DIR_OUT;
1256                 udc->ep0_state = WAIT_FOR_OUT_STATUS;
1257         }
1258
1259         return 0;
1260 }
1261
1262 /* a request complete in ep0, whether gadget request or udc request */
1263 static void ep0_req_complete(struct qe_udc *udc, struct qe_req *req)
1264 {
1265         struct qe_ep *ep = &udc->eps[0];
1266         /* because usb and ep's status already been set in ch9setaddress() */
1267
1268         switch (udc->ep0_state) {
1269         case DATA_STATE_XMIT:
1270                 done(ep, req, 0);
1271                 /* receive status phase */
1272                 if (ep0_prime_status(udc, USB_DIR_OUT))
1273                         qe_ep0_stall(udc);
1274                 break;
1275
1276         case DATA_STATE_NEED_ZLP:
1277                 done(ep, req, 0);
1278                 udc->ep0_state = WAIT_FOR_SETUP;
1279                 break;
1280
1281         case DATA_STATE_RECV:
1282                 done(ep, req, 0);
1283                 /* send status phase */
1284                 if (ep0_prime_status(udc, USB_DIR_IN))
1285                         qe_ep0_stall(udc);
1286                 break;
1287
1288         case WAIT_FOR_OUT_STATUS:
1289                 done(ep, req, 0);
1290                 udc->ep0_state = WAIT_FOR_SETUP;
1291                 break;
1292
1293         case WAIT_FOR_SETUP:
1294                 dev_vdbg(udc->dev, "Unexpected interrupt\n");
1295                 break;
1296
1297         default:
1298                 qe_ep0_stall(udc);
1299                 break;
1300         }
1301 }
1302
1303 static int ep0_txcomplete(struct qe_ep *ep, unsigned char restart)
1304 {
1305         struct qe_req *tx_req = NULL;
1306         struct qe_frame *frame = ep->txframe;
1307
1308         if ((frame_get_info(frame) & (ZLP | NO_REQ)) == (ZLP | NO_REQ)) {
1309                 if (!restart)
1310                         ep->udc->ep0_state = WAIT_FOR_SETUP;
1311                 else
1312                         sendnulldata(ep, ep->txframe, SETUP_STATUS | NO_REQ);
1313                 return 0;
1314         }
1315
1316         tx_req = ep->tx_req;
1317         if (tx_req != NULL) {
1318                 if (!restart) {
1319                         int asent = ep->last;
1320                         ep->sent += asent;
1321                         ep->last -= asent;
1322                 } else {
1323                         ep->last = 0;
1324                 }
1325
1326                 /* a request already were transmitted completely */
1327                 if ((ep->tx_req->req.length - ep->sent) <= 0) {
1328                         ep->tx_req->req.actual = (unsigned int)ep->sent;
1329                         ep0_req_complete(ep->udc, ep->tx_req);
1330                         ep->tx_req = NULL;
1331                         ep->last = 0;
1332                         ep->sent = 0;
1333                 }
1334         } else {
1335                 dev_vdbg(ep->udc->dev, "the ep0_controller have no req\n");
1336         }
1337
1338         return 0;
1339 }
1340
1341 static int ep0_txframe_handle(struct qe_ep *ep)
1342 {
1343         /* if have error, transmit again */
1344         if (frame_get_status(ep->txframe) & FRAME_ERROR) {
1345                 qe_ep_flushtxfifo(ep);
1346                 dev_vdbg(ep->udc->dev, "The EP0 transmit data have error!\n");
1347                 if (frame_get_info(ep->txframe) & PID_DATA0)
1348                         ep->data01 = 0;
1349                 else
1350                         ep->data01 = 1;
1351
1352                 ep0_txcomplete(ep, 1);
1353         } else
1354                 ep0_txcomplete(ep, 0);
1355
1356         frame_create_tx(ep, ep->txframe);
1357         return 0;
1358 }
1359
1360 static int qe_ep0_txconf(struct qe_ep *ep)
1361 {
1362         struct qe_bd __iomem *bd;
1363         struct qe_frame *pframe;
1364         u32 bdstatus;
1365
1366         bd = ep->c_txbd;
1367         bdstatus = in_be32((u32 __iomem *)bd);
1368         while (!(bdstatus & T_R) && (bdstatus & ~T_W)) {
1369                 pframe = ep->txframe;
1370
1371                 /* clear and recycle the BD */
1372                 out_be32((u32 __iomem *)bd, bdstatus & T_W);
1373                 out_be32(&bd->buf, 0);
1374                 if (bdstatus & T_W)
1375                         ep->c_txbd = ep->txbase;
1376                 else
1377                         ep->c_txbd++;
1378
1379                 if (ep->c_txbd == ep->n_txbd) {
1380                         if (bdstatus & DEVICE_T_ERROR) {
1381                                 frame_set_status(pframe, FRAME_ERROR);
1382                                 if (bdstatus & T_TO)
1383                                         pframe->status |= TX_ER_TIMEOUT;
1384                                 if (bdstatus & T_UN)
1385                                         pframe->status |= TX_ER_UNDERUN;
1386                         }
1387                         ep0_txframe_handle(ep);
1388                 }
1389
1390                 bd = ep->c_txbd;
1391                 bdstatus = in_be32((u32 __iomem *)bd);
1392         }
1393
1394         return 0;
1395 }
1396
1397 static int ep_txframe_handle(struct qe_ep *ep)
1398 {
1399         if (frame_get_status(ep->txframe) & FRAME_ERROR) {
1400                 qe_ep_flushtxfifo(ep);
1401                 dev_vdbg(ep->udc->dev, "The EP0 transmit data have error!\n");
1402                 if (frame_get_info(ep->txframe) & PID_DATA0)
1403                         ep->data01 = 0;
1404                 else
1405                         ep->data01 = 1;
1406
1407                 txcomplete(ep, 1);
1408         } else
1409                 txcomplete(ep, 0);
1410
1411         frame_create_tx(ep, ep->txframe); /* send the data */
1412         return 0;
1413 }
1414
1415 /* confirm the already trainsmited bd */
1416 static int qe_ep_txconf(struct qe_ep *ep)
1417 {
1418         struct qe_bd __iomem *bd;
1419         struct qe_frame *pframe = NULL;
1420         u32 bdstatus;
1421         unsigned char breakonrxinterrupt = 0;
1422
1423         bd = ep->c_txbd;
1424         bdstatus = in_be32((u32 __iomem *)bd);
1425         while (!(bdstatus & T_R) && (bdstatus & ~T_W)) {
1426                 pframe = ep->txframe;
1427                 if (bdstatus & DEVICE_T_ERROR) {
1428                         frame_set_status(pframe, FRAME_ERROR);
1429                         if (bdstatus & T_TO)
1430                                 pframe->status |= TX_ER_TIMEOUT;
1431                         if (bdstatus & T_UN)
1432                                 pframe->status |= TX_ER_UNDERUN;
1433                 }
1434
1435                 /* clear and recycle the BD */
1436                 out_be32((u32 __iomem *)bd, bdstatus & T_W);
1437                 out_be32(&bd->buf, 0);
1438                 if (bdstatus & T_W)
1439                         ep->c_txbd = ep->txbase;
1440                 else
1441                         ep->c_txbd++;
1442
1443                 /* handle the tx frame */
1444                 ep_txframe_handle(ep);
1445                 bd = ep->c_txbd;
1446                 bdstatus = in_be32((u32 __iomem *)bd);
1447         }
1448         if (breakonrxinterrupt)
1449                 return -EIO;
1450         else
1451                 return 0;
1452 }
1453
1454 /* Add a request in queue, and try to transmit a packet */
1455 static int ep_req_send(struct qe_ep *ep, struct qe_req *req)
1456 {
1457         int reval = 0;
1458
1459         if (ep->tx_req == NULL) {
1460                 ep->sent = 0;
1461                 ep->last = 0;
1462                 txcomplete(ep, 0); /* can gain a new tx_req */
1463                 reval = frame_create_tx(ep, ep->txframe);
1464         }
1465         return reval;
1466 }
1467
1468 /* Maybe this is a good ideal */
1469 static int ep_req_rx(struct qe_ep *ep, struct qe_req *req)
1470 {
1471         struct qe_udc *udc = ep->udc;
1472         struct qe_frame *pframe = NULL;
1473         struct qe_bd __iomem *bd;
1474         u32 bdstatus, length;
1475         u32 vaddr, fsize;
1476         u8 *cp;
1477         u8 finish_req = 0;
1478         u8 framepid;
1479
1480         if (list_empty(&ep->queue)) {
1481                 dev_vdbg(udc->dev, "the req already finish!\n");
1482                 return 0;
1483         }
1484         pframe = ep->rxframe;
1485
1486         bd = ep->n_rxbd;
1487         bdstatus = in_be32((u32 __iomem *)bd);
1488         length = bdstatus & BD_LENGTH_MASK;
1489
1490         while (!(bdstatus & R_E) && length) {
1491                 if (finish_req)
1492                         break;
1493                 if ((bdstatus & R_F) && (bdstatus & R_L)
1494                                         && !(bdstatus & R_ERROR)) {
1495                         qe_frame_clean(pframe);
1496                         vaddr = (u32)phys_to_virt(in_be32(&bd->buf));
1497                         frame_set_data(pframe, (u8 *)vaddr);
1498                         frame_set_length(pframe, (length - USB_CRC_SIZE));
1499                         frame_set_status(pframe, FRAME_OK);
1500                         switch (bdstatus & R_PID) {
1501                         case R_PID_DATA1:
1502                                 frame_set_info(pframe, PID_DATA1); break;
1503                         default:
1504                                 frame_set_info(pframe, PID_DATA0); break;
1505                         }
1506                         /* handle the rx frame */
1507
1508                         if (frame_get_info(pframe) & PID_DATA1)
1509                                 framepid = 0x1;
1510                         else
1511                                 framepid = 0;
1512
1513                         if (framepid != ep->data01) {
1514                                 dev_vdbg(udc->dev, "the data01 error!\n");
1515                         } else {
1516                                 fsize = frame_get_length(pframe);
1517
1518                                 cp = (u8 *)(req->req.buf) + req->req.actual;
1519                                 if (cp) {
1520                                         memcpy(cp, pframe->data, fsize);
1521                                         req->req.actual += fsize;
1522                                         if ((fsize < ep->ep.maxpacket)
1523                                                 || (req->req.actual >=
1524                                                         req->req.length)) {
1525                                                 finish_req = 1;
1526                                                 done(ep, req, 0);
1527                                                 if (list_empty(&ep->queue))
1528                                                         qe_eprx_nack(ep);
1529                                         }
1530                                 }
1531                                 qe_ep_toggledata01(ep);
1532                         }
1533                 } else {
1534                         dev_err(udc->dev, "The receive frame with error!\n");
1535                 }
1536
1537                 /* note: don't clear the rxbd's buffer address *
1538                  * only Clear the length */
1539                 out_be32((u32 __iomem *)bd, (bdstatus & BD_STATUS_MASK));
1540                 ep->has_data--;
1541
1542                 /* Get next BD */
1543                 if (bdstatus & R_W)
1544                         bd = ep->rxbase;
1545                 else
1546                         bd++;
1547
1548                 bdstatus = in_be32((u32 __iomem *)bd);
1549                 length = bdstatus & BD_LENGTH_MASK;
1550         }
1551
1552         ep->n_rxbd = bd;
1553         ep_recycle_rxbds(ep);
1554
1555         return 0;
1556 }
1557
1558 /* only add the request in queue */
1559 static int ep_req_receive(struct qe_ep *ep, struct qe_req *req)
1560 {
1561         if (ep->state == EP_STATE_NACK) {
1562                 if (ep->has_data <= 0) {
1563                         /* Enable rx and unmask rx interrupt */
1564                         qe_eprx_normal(ep);
1565                 } else {
1566                         /* Copy the exist BD data */
1567                         ep_req_rx(ep, req);
1568                 }
1569         }
1570
1571         return 0;
1572 }
1573
1574 /********************************************************************
1575         Internal Used Function End
1576 ********************************************************************/
1577
1578 /*-----------------------------------------------------------------------
1579         Endpoint Management Functions For Gadget
1580  -----------------------------------------------------------------------*/
1581 static int qe_ep_enable(struct usb_ep *_ep,
1582                          const struct usb_endpoint_descriptor *desc)
1583 {
1584         struct qe_udc *udc;
1585         struct qe_ep *ep;
1586         int retval = 0;
1587         unsigned char epnum;
1588
1589         ep = container_of(_ep, struct qe_ep, ep);
1590
1591         /* catch various bogus parameters */
1592         if (!_ep || !desc || _ep->name == ep_name[0] ||
1593                         (desc->bDescriptorType != USB_DT_ENDPOINT))
1594                 return -EINVAL;
1595
1596         udc = ep->udc;
1597         if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN))
1598                 return -ESHUTDOWN;
1599
1600         epnum = (u8)desc->bEndpointAddress & 0xF;
1601
1602         retval = qe_ep_init(udc, epnum, desc);
1603         if (retval != 0) {
1604                 cpm_muram_free(cpm_muram_offset(ep->rxbase));
1605                 dev_dbg(udc->dev, "enable ep%d failed\n", ep->epnum);
1606                 return -EINVAL;
1607         }
1608         dev_dbg(udc->dev, "enable ep%d successful\n", ep->epnum);
1609         return 0;
1610 }
1611
1612 static int qe_ep_disable(struct usb_ep *_ep)
1613 {
1614         struct qe_udc *udc;
1615         struct qe_ep *ep;
1616         unsigned long flags;
1617         unsigned int size;
1618
1619         ep = container_of(_ep, struct qe_ep, ep);
1620         udc = ep->udc;
1621
1622         if (!_ep || !ep->ep.desc) {
1623                 dev_dbg(udc->dev, "%s not enabled\n", _ep ? ep->ep.name : NULL);
1624                 return -EINVAL;
1625         }
1626
1627         spin_lock_irqsave(&udc->lock, flags);
1628         /* Nuke all pending requests (does flush) */
1629         nuke(ep, -ESHUTDOWN);
1630         ep->ep.desc = NULL;
1631         ep->stopped = 1;
1632         ep->tx_req = NULL;
1633         qe_ep_reset(udc, ep->epnum);
1634         spin_unlock_irqrestore(&udc->lock, flags);
1635
1636         cpm_muram_free(cpm_muram_offset(ep->rxbase));
1637
1638         if (ep->dir == USB_DIR_OUT)
1639                 size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) *
1640                                 (USB_BDRING_LEN_RX + 1);
1641         else
1642                 size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) *
1643                                 (USB_BDRING_LEN + 1);
1644
1645         if (ep->dir != USB_DIR_IN) {
1646                 kfree(ep->rxframe);
1647                 if (ep->rxbufmap) {
1648                         dma_unmap_single(udc->gadget.dev.parent,
1649                                         ep->rxbuf_d, size,
1650                                         DMA_FROM_DEVICE);
1651                         ep->rxbuf_d = DMA_ADDR_INVALID;
1652                 } else {
1653                         dma_sync_single_for_cpu(
1654                                         udc->gadget.dev.parent,
1655                                         ep->rxbuf_d, size,
1656                                         DMA_FROM_DEVICE);
1657                 }
1658                 kfree(ep->rxbuffer);
1659         }
1660
1661         if (ep->dir != USB_DIR_OUT)
1662                 kfree(ep->txframe);
1663
1664         dev_dbg(udc->dev, "disabled %s OK\n", _ep->name);
1665         return 0;
1666 }
1667
1668 static struct usb_request *qe_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
1669 {
1670         struct qe_req *req;
1671
1672         req = kzalloc(sizeof(*req), gfp_flags);
1673         if (!req)
1674                 return NULL;
1675
1676         req->req.dma = DMA_ADDR_INVALID;
1677
1678         INIT_LIST_HEAD(&req->queue);
1679
1680         return &req->req;
1681 }
1682
1683 static void qe_free_request(struct usb_ep *_ep, struct usb_request *_req)
1684 {
1685         struct qe_req *req;
1686
1687         req = container_of(_req, struct qe_req, req);
1688
1689         if (_req)
1690                 kfree(req);
1691 }
1692
1693 static int __qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req)
1694 {
1695         struct qe_ep *ep = container_of(_ep, struct qe_ep, ep);
1696         struct qe_req *req = container_of(_req, struct qe_req, req);
1697         struct qe_udc *udc;
1698         int reval;
1699
1700         udc = ep->udc;
1701         /* catch various bogus parameters */
1702         if (!_req || !req->req.complete || !req->req.buf
1703                         || !list_empty(&req->queue)) {
1704                 dev_dbg(udc->dev, "bad params\n");
1705                 return -EINVAL;
1706         }
1707         if (!_ep || (!ep->ep.desc && ep_index(ep))) {
1708                 dev_dbg(udc->dev, "bad ep\n");
1709                 return -EINVAL;
1710         }
1711
1712         if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
1713                 return -ESHUTDOWN;
1714
1715         req->ep = ep;
1716
1717         /* map virtual address to hardware */
1718         if (req->req.dma == DMA_ADDR_INVALID) {
1719                 req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
1720                                         req->req.buf,
1721                                         req->req.length,
1722                                         ep_is_in(ep)
1723                                         ? DMA_TO_DEVICE :
1724                                         DMA_FROM_DEVICE);
1725                 req->mapped = 1;
1726         } else {
1727                 dma_sync_single_for_device(ep->udc->gadget.dev.parent,
1728                                         req->req.dma, req->req.length,
1729                                         ep_is_in(ep)
1730                                         ? DMA_TO_DEVICE :
1731                                         DMA_FROM_DEVICE);
1732                 req->mapped = 0;
1733         }
1734
1735         req->req.status = -EINPROGRESS;
1736         req->req.actual = 0;
1737
1738         list_add_tail(&req->queue, &ep->queue);
1739         dev_vdbg(udc->dev, "gadget have request in %s! %d\n",
1740                         ep->name, req->req.length);
1741
1742         /* push the request to device */
1743         if (ep_is_in(ep))
1744                 reval = ep_req_send(ep, req);
1745
1746         /* EP0 */
1747         if (ep_index(ep) == 0 && req->req.length > 0) {
1748                 if (ep_is_in(ep))
1749                         udc->ep0_state = DATA_STATE_XMIT;
1750                 else
1751                         udc->ep0_state = DATA_STATE_RECV;
1752         }
1753
1754         if (ep->dir == USB_DIR_OUT)
1755                 reval = ep_req_receive(ep, req);
1756
1757         return 0;
1758 }
1759
1760 /* queues (submits) an I/O request to an endpoint */
1761 static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
1762                        gfp_t gfp_flags)
1763 {
1764         struct qe_ep *ep = container_of(_ep, struct qe_ep, ep);
1765         struct qe_udc *udc = ep->udc;
1766         unsigned long flags;
1767         int ret;
1768
1769         spin_lock_irqsave(&udc->lock, flags);
1770         ret = __qe_ep_queue(_ep, _req);
1771         spin_unlock_irqrestore(&udc->lock, flags);
1772         return ret;
1773 }
1774
1775 /* dequeues (cancels, unlinks) an I/O request from an endpoint */
1776 static int qe_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
1777 {
1778         struct qe_ep *ep = container_of(_ep, struct qe_ep, ep);
1779         struct qe_req *req;
1780         unsigned long flags;
1781
1782         if (!_ep || !_req)
1783                 return -EINVAL;
1784
1785         spin_lock_irqsave(&ep->udc->lock, flags);
1786
1787         /* make sure it's actually queued on this endpoint */
1788         list_for_each_entry(req, &ep->queue, queue) {
1789                 if (&req->req == _req)
1790                         break;
1791         }
1792
1793         if (&req->req != _req) {
1794                 spin_unlock_irqrestore(&ep->udc->lock, flags);
1795                 return -EINVAL;
1796         }
1797
1798         done(ep, req, -ECONNRESET);
1799
1800         spin_unlock_irqrestore(&ep->udc->lock, flags);
1801         return 0;
1802 }
1803
1804 /*-----------------------------------------------------------------
1805  * modify the endpoint halt feature
1806  * @ep: the non-isochronous endpoint being stalled
1807  * @value: 1--set halt  0--clear halt
1808  * Returns zero, or a negative error code.
1809 *----------------------------------------------------------------*/
1810 static int qe_ep_set_halt(struct usb_ep *_ep, int value)
1811 {
1812         struct qe_ep *ep;
1813         unsigned long flags;
1814         int status = -EOPNOTSUPP;
1815         struct qe_udc *udc;
1816
1817         ep = container_of(_ep, struct qe_ep, ep);
1818         if (!_ep || !ep->ep.desc) {
1819                 status = -EINVAL;
1820                 goto out;
1821         }
1822
1823         udc = ep->udc;
1824         /* Attempt to halt IN ep will fail if any transfer requests
1825          * are still queue */
1826         if (value && ep_is_in(ep) && !list_empty(&ep->queue)) {
1827                 status = -EAGAIN;
1828                 goto out;
1829         }
1830
1831         status = 0;
1832         spin_lock_irqsave(&ep->udc->lock, flags);
1833         qe_eptx_stall_change(ep, value);
1834         qe_eprx_stall_change(ep, value);
1835         spin_unlock_irqrestore(&ep->udc->lock, flags);
1836
1837         if (ep->epnum == 0) {
1838                 udc->ep0_state = WAIT_FOR_SETUP;
1839                 udc->ep0_dir = 0;
1840         }
1841
1842         /* set data toggle to DATA0 on clear halt */
1843         if (value == 0)
1844                 ep->data01 = 0;
1845 out:
1846         dev_vdbg(udc->dev, "%s %s halt stat %d\n", ep->ep.name,
1847                         value ?  "set" : "clear", status);
1848
1849         return status;
1850 }
1851
1852 static const struct usb_ep_ops qe_ep_ops = {
1853         .enable = qe_ep_enable,
1854         .disable = qe_ep_disable,
1855
1856         .alloc_request = qe_alloc_request,
1857         .free_request = qe_free_request,
1858
1859         .queue = qe_ep_queue,
1860         .dequeue = qe_ep_dequeue,
1861
1862         .set_halt = qe_ep_set_halt,
1863 };
1864
1865 /*------------------------------------------------------------------------
1866         Gadget Driver Layer Operations
1867  ------------------------------------------------------------------------*/
1868
1869 /* Get the current frame number */
1870 static int qe_get_frame(struct usb_gadget *gadget)
1871 {
1872         struct qe_udc *udc = container_of(gadget, struct qe_udc, gadget);
1873         u16 tmp;
1874
1875         tmp = in_be16(&udc->usb_param->frame_n);
1876         if (tmp & 0x8000)
1877                 return tmp & 0x07ff;
1878         return -EINVAL;
1879 }
1880
1881 static int fsl_qe_start(struct usb_gadget *gadget,
1882                 struct usb_gadget_driver *driver);
1883 static int fsl_qe_stop(struct usb_gadget *gadget);
1884
1885 /* defined in usb_gadget.h */
1886 static const struct usb_gadget_ops qe_gadget_ops = {
1887         .get_frame = qe_get_frame,
1888         .udc_start = fsl_qe_start,
1889         .udc_stop = fsl_qe_stop,
1890 };
1891
1892 /*-------------------------------------------------------------------------
1893         USB ep0 Setup process in BUS Enumeration
1894  -------------------------------------------------------------------------*/
1895 static int udc_reset_ep_queue(struct qe_udc *udc, u8 pipe)
1896 {
1897         struct qe_ep *ep = &udc->eps[pipe];
1898
1899         nuke(ep, -ECONNRESET);
1900         ep->tx_req = NULL;
1901         return 0;
1902 }
1903
1904 static int reset_queues(struct qe_udc *udc)
1905 {
1906         u8 pipe;
1907
1908         for (pipe = 0; pipe < USB_MAX_ENDPOINTS; pipe++)
1909                 udc_reset_ep_queue(udc, pipe);
1910
1911         /* report disconnect; the driver is already quiesced */
1912         spin_unlock(&udc->lock);
1913         usb_gadget_udc_reset(&udc->gadget, udc->driver);
1914         spin_lock(&udc->lock);
1915
1916         return 0;
1917 }
1918
1919 static void ch9setaddress(struct qe_udc *udc, u16 value, u16 index,
1920                         u16 length)
1921 {
1922         /* Save the new address to device struct */
1923         udc->device_address = (u8) value;
1924         /* Update usb state */
1925         udc->usb_state = USB_STATE_ADDRESS;
1926
1927         /* Status phase , send a ZLP */
1928         if (ep0_prime_status(udc, USB_DIR_IN))
1929                 qe_ep0_stall(udc);
1930 }
1931
1932 static void ownercomplete(struct usb_ep *_ep, struct usb_request *_req)
1933 {
1934         struct qe_req *req = container_of(_req, struct qe_req, req);
1935
1936         req->req.buf = NULL;
1937         kfree(req);
1938 }
1939
1940 static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value,
1941                         u16 index, u16 length)
1942 {
1943         u16 usb_status = 0;
1944         struct qe_req *req;
1945         struct qe_ep *ep;
1946         int status = 0;
1947
1948         ep = &udc->eps[0];
1949         if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
1950                 /* Get device status */
1951                 usb_status = 1 << USB_DEVICE_SELF_POWERED;
1952         } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
1953                 /* Get interface status */
1954                 /* We don't have interface information in udc driver */
1955                 usb_status = 0;
1956         } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
1957                 /* Get endpoint status */
1958                 int pipe = index & USB_ENDPOINT_NUMBER_MASK;
1959                 struct qe_ep *target_ep = &udc->eps[pipe];
1960                 u16 usep;
1961
1962                 /* stall if endpoint doesn't exist */
1963                 if (!target_ep->ep.desc)
1964                         goto stall;
1965
1966                 usep = in_be16(&udc->usb_regs->usb_usep[pipe]);
1967                 if (index & USB_DIR_IN) {
1968                         if (target_ep->dir != USB_DIR_IN)
1969                                 goto stall;
1970                         if ((usep & USB_THS_MASK) == USB_THS_STALL)
1971                                 usb_status = 1 << USB_ENDPOINT_HALT;
1972                 } else {
1973                         if (target_ep->dir != USB_DIR_OUT)
1974                                 goto stall;
1975                         if ((usep & USB_RHS_MASK) == USB_RHS_STALL)
1976                                 usb_status = 1 << USB_ENDPOINT_HALT;
1977                 }
1978         }
1979
1980         req = container_of(qe_alloc_request(&ep->ep, GFP_KERNEL),
1981                                         struct qe_req, req);
1982         req->req.length = 2;
1983         req->req.buf = udc->statusbuf;
1984         *(u16 *)req->req.buf = cpu_to_le16(usb_status);
1985         req->req.status = -EINPROGRESS;
1986         req->req.actual = 0;
1987         req->req.complete = ownercomplete;
1988
1989         udc->ep0_dir = USB_DIR_IN;
1990
1991         /* data phase */
1992         status = __qe_ep_queue(&ep->ep, &req->req);
1993
1994         if (status == 0)
1995                 return;
1996 stall:
1997         dev_err(udc->dev, "Can't respond to getstatus request \n");
1998         qe_ep0_stall(udc);
1999 }
2000
2001 /* only handle the setup request, suppose the device in normal status */
2002 static void setup_received_handle(struct qe_udc *udc,
2003                                 struct usb_ctrlrequest *setup)
2004 {
2005         /* Fix Endian (udc->local_setup_buff is cpu Endian now)*/
2006         u16 wValue = le16_to_cpu(setup->wValue);
2007         u16 wIndex = le16_to_cpu(setup->wIndex);
2008         u16 wLength = le16_to_cpu(setup->wLength);
2009
2010         /* clear the previous request in the ep0 */
2011         udc_reset_ep_queue(udc, 0);
2012
2013         if (setup->bRequestType & USB_DIR_IN)
2014                 udc->ep0_dir = USB_DIR_IN;
2015         else
2016                 udc->ep0_dir = USB_DIR_OUT;
2017
2018         switch (setup->bRequest) {
2019         case USB_REQ_GET_STATUS:
2020                 /* Data+Status phase form udc */
2021                 if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
2022                                         != (USB_DIR_IN | USB_TYPE_STANDARD))
2023                         break;
2024                 ch9getstatus(udc, setup->bRequestType, wValue, wIndex,
2025                                         wLength);
2026                 return;
2027
2028         case USB_REQ_SET_ADDRESS:
2029                 /* Status phase from udc */
2030                 if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
2031                                                 USB_RECIP_DEVICE))
2032                         break;
2033                 ch9setaddress(udc, wValue, wIndex, wLength);
2034                 return;
2035
2036         case USB_REQ_CLEAR_FEATURE:
2037         case USB_REQ_SET_FEATURE:
2038                 /* Requests with no data phase, status phase from udc */
2039                 if ((setup->bRequestType & USB_TYPE_MASK)
2040                                         != USB_TYPE_STANDARD)
2041                         break;
2042
2043                 if ((setup->bRequestType & USB_RECIP_MASK)
2044                                 == USB_RECIP_ENDPOINT) {
2045                         int pipe = wIndex & USB_ENDPOINT_NUMBER_MASK;
2046                         struct qe_ep *ep;
2047
2048                         if (wValue != 0 || wLength != 0
2049                                 || pipe >= USB_MAX_ENDPOINTS)
2050                                 break;
2051                         ep = &udc->eps[pipe];
2052
2053                         spin_unlock(&udc->lock);
2054                         qe_ep_set_halt(&ep->ep,
2055                                         (setup->bRequest == USB_REQ_SET_FEATURE)
2056                                                 ? 1 : 0);
2057                         spin_lock(&udc->lock);
2058                 }
2059
2060                 ep0_prime_status(udc, USB_DIR_IN);
2061
2062                 return;
2063
2064         default:
2065                 break;
2066         }
2067
2068         if (wLength) {
2069                 /* Data phase from gadget, status phase from udc */
2070                 if (setup->bRequestType & USB_DIR_IN) {
2071                         udc->ep0_state = DATA_STATE_XMIT;
2072                         udc->ep0_dir = USB_DIR_IN;
2073                 } else {
2074                         udc->ep0_state = DATA_STATE_RECV;
2075                         udc->ep0_dir = USB_DIR_OUT;
2076                 }
2077                 spin_unlock(&udc->lock);
2078                 if (udc->driver->setup(&udc->gadget,
2079                                         &udc->local_setup_buff) < 0)
2080                         qe_ep0_stall(udc);
2081                 spin_lock(&udc->lock);
2082         } else {
2083                 /* No data phase, IN status from gadget */
2084                 udc->ep0_dir = USB_DIR_IN;
2085                 spin_unlock(&udc->lock);
2086                 if (udc->driver->setup(&udc->gadget,
2087                                         &udc->local_setup_buff) < 0)
2088                         qe_ep0_stall(udc);
2089                 spin_lock(&udc->lock);
2090                 udc->ep0_state = DATA_STATE_NEED_ZLP;
2091         }
2092 }
2093
2094 /*-------------------------------------------------------------------------
2095         USB Interrupt handlers
2096  -------------------------------------------------------------------------*/
2097 static void suspend_irq(struct qe_udc *udc)
2098 {
2099         udc->resume_state = udc->usb_state;
2100         udc->usb_state = USB_STATE_SUSPENDED;
2101
2102         /* report suspend to the driver ,serial.c not support this*/
2103         if (udc->driver->suspend)
2104                 udc->driver->suspend(&udc->gadget);
2105 }
2106
2107 static void resume_irq(struct qe_udc *udc)
2108 {
2109         udc->usb_state = udc->resume_state;
2110         udc->resume_state = 0;
2111
2112         /* report resume to the driver , serial.c not support this*/
2113         if (udc->driver->resume)
2114                 udc->driver->resume(&udc->gadget);
2115 }
2116
2117 static void idle_irq(struct qe_udc *udc)
2118 {
2119         u8 usbs;
2120
2121         usbs = in_8(&udc->usb_regs->usb_usbs);
2122         if (usbs & USB_IDLE_STATUS_MASK) {
2123                 if ((udc->usb_state) != USB_STATE_SUSPENDED)
2124                         suspend_irq(udc);
2125         } else {
2126                 if (udc->usb_state == USB_STATE_SUSPENDED)
2127                         resume_irq(udc);
2128         }
2129 }
2130
2131 static int reset_irq(struct qe_udc *udc)
2132 {
2133         unsigned char i;
2134
2135         if (udc->usb_state == USB_STATE_DEFAULT)
2136                 return 0;
2137
2138         qe_usb_disable(udc);
2139         out_8(&udc->usb_regs->usb_usadr, 0);
2140
2141         for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
2142                 if (udc->eps[i].init)
2143                         qe_ep_reset(udc, i);
2144         }
2145
2146         reset_queues(udc);
2147         udc->usb_state = USB_STATE_DEFAULT;
2148         udc->ep0_state = WAIT_FOR_SETUP;
2149         udc->ep0_dir = USB_DIR_OUT;
2150         qe_usb_enable(udc);
2151         return 0;
2152 }
2153
2154 static int bsy_irq(struct qe_udc *udc)
2155 {
2156         return 0;
2157 }
2158
2159 static int txe_irq(struct qe_udc *udc)
2160 {
2161         return 0;
2162 }
2163
2164 /* ep0 tx interrupt also in here */
2165 static int tx_irq(struct qe_udc *udc)
2166 {
2167         struct qe_ep *ep;
2168         struct qe_bd __iomem *bd;
2169         int i, res = 0;
2170
2171         if ((udc->usb_state == USB_STATE_ADDRESS)
2172                 && (in_8(&udc->usb_regs->usb_usadr) == 0))
2173                 out_8(&udc->usb_regs->usb_usadr, udc->device_address);
2174
2175         for (i = (USB_MAX_ENDPOINTS-1); ((i >= 0) && (res == 0)); i--) {
2176                 ep = &udc->eps[i];
2177                 if (ep && ep->init && (ep->dir != USB_DIR_OUT)) {
2178                         bd = ep->c_txbd;
2179                         if (!(in_be32((u32 __iomem *)bd) & T_R)
2180                                                 && (in_be32(&bd->buf))) {
2181                                 /* confirm the transmitted bd */
2182                                 if (ep->epnum == 0)
2183                                         res = qe_ep0_txconf(ep);
2184                                 else
2185                                         res = qe_ep_txconf(ep);
2186                         }
2187                 }
2188         }
2189         return res;
2190 }
2191
2192
2193 /* setup packect's rx is handle in the function too */
2194 static void rx_irq(struct qe_udc *udc)
2195 {
2196         struct qe_ep *ep;
2197         struct qe_bd __iomem *bd;
2198         int i;
2199
2200         for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
2201                 ep = &udc->eps[i];
2202                 if (ep && ep->init && (ep->dir != USB_DIR_IN)) {
2203                         bd = ep->n_rxbd;
2204                         if (!(in_be32((u32 __iomem *)bd) & R_E)
2205                                                 && (in_be32(&bd->buf))) {
2206                                 if (ep->epnum == 0) {
2207                                         qe_ep0_rx(udc);
2208                                 } else {
2209                                         /*non-setup package receive*/
2210                                         qe_ep_rx(ep);
2211                                 }
2212                         }
2213                 }
2214         }
2215 }
2216
2217 static irqreturn_t qe_udc_irq(int irq, void *_udc)
2218 {
2219         struct qe_udc *udc = (struct qe_udc *)_udc;
2220         u16 irq_src;
2221         irqreturn_t status = IRQ_NONE;
2222         unsigned long flags;
2223
2224         spin_lock_irqsave(&udc->lock, flags);
2225
2226         irq_src = in_be16(&udc->usb_regs->usb_usber) &
2227                 in_be16(&udc->usb_regs->usb_usbmr);
2228         /* Clear notification bits */
2229         out_be16(&udc->usb_regs->usb_usber, irq_src);
2230         /* USB Interrupt */
2231         if (irq_src & USB_E_IDLE_MASK) {
2232                 idle_irq(udc);
2233                 irq_src &= ~USB_E_IDLE_MASK;
2234                 status = IRQ_HANDLED;
2235         }
2236
2237         if (irq_src & USB_E_TXB_MASK) {
2238                 tx_irq(udc);
2239                 irq_src &= ~USB_E_TXB_MASK;
2240                 status = IRQ_HANDLED;
2241         }
2242
2243         if (irq_src & USB_E_RXB_MASK) {
2244                 rx_irq(udc);
2245                 irq_src &= ~USB_E_RXB_MASK;
2246                 status = IRQ_HANDLED;
2247         }
2248
2249         if (irq_src & USB_E_RESET_MASK) {
2250                 reset_irq(udc);
2251                 irq_src &= ~USB_E_RESET_MASK;
2252                 status = IRQ_HANDLED;
2253         }
2254
2255         if (irq_src & USB_E_BSY_MASK) {
2256                 bsy_irq(udc);
2257                 irq_src &= ~USB_E_BSY_MASK;
2258                 status = IRQ_HANDLED;
2259         }
2260
2261         if (irq_src & USB_E_TXE_MASK) {
2262                 txe_irq(udc);
2263                 irq_src &= ~USB_E_TXE_MASK;
2264                 status = IRQ_HANDLED;
2265         }
2266
2267         spin_unlock_irqrestore(&udc->lock, flags);
2268
2269         return status;
2270 }
2271
2272 /*-------------------------------------------------------------------------
2273         Gadget driver probe and unregister.
2274  --------------------------------------------------------------------------*/
2275 static int fsl_qe_start(struct usb_gadget *gadget,
2276                 struct usb_gadget_driver *driver)
2277 {
2278         struct qe_udc *udc;
2279         unsigned long flags;
2280
2281         udc = container_of(gadget, struct qe_udc, gadget);
2282         /* lock is needed but whether should use this lock or another */
2283         spin_lock_irqsave(&udc->lock, flags);
2284
2285         driver->driver.bus = NULL;
2286         /* hook up the driver */
2287         udc->driver = driver;
2288         udc->gadget.speed = driver->max_speed;
2289
2290         /* Enable IRQ reg and Set usbcmd reg EN bit */
2291         qe_usb_enable(udc);
2292
2293         out_be16(&udc->usb_regs->usb_usber, 0xffff);
2294         out_be16(&udc->usb_regs->usb_usbmr, USB_E_DEFAULT_DEVICE);
2295         udc->usb_state = USB_STATE_ATTACHED;
2296         udc->ep0_state = WAIT_FOR_SETUP;
2297         udc->ep0_dir = USB_DIR_OUT;
2298         spin_unlock_irqrestore(&udc->lock, flags);
2299
2300         return 0;
2301 }
2302
2303 static int fsl_qe_stop(struct usb_gadget *gadget)
2304 {
2305         struct qe_udc *udc;
2306         struct qe_ep *loop_ep;
2307         unsigned long flags;
2308
2309         udc = container_of(gadget, struct qe_udc, gadget);
2310         /* stop usb controller, disable intr */
2311         qe_usb_disable(udc);
2312
2313         /* in fact, no needed */
2314         udc->usb_state = USB_STATE_ATTACHED;
2315         udc->ep0_state = WAIT_FOR_SETUP;
2316         udc->ep0_dir = 0;
2317
2318         /* stand operation */
2319         spin_lock_irqsave(&udc->lock, flags);
2320         udc->gadget.speed = USB_SPEED_UNKNOWN;
2321         nuke(&udc->eps[0], -ESHUTDOWN);
2322         list_for_each_entry(loop_ep, &udc->gadget.ep_list, ep.ep_list)
2323                 nuke(loop_ep, -ESHUTDOWN);
2324         spin_unlock_irqrestore(&udc->lock, flags);
2325
2326         udc->driver = NULL;
2327
2328         return 0;
2329 }
2330
2331 /* udc structure's alloc and setup, include ep-param alloc */
2332 static struct qe_udc *qe_udc_config(struct platform_device *ofdev)
2333 {
2334         struct qe_udc *udc;
2335         struct device_node *np = ofdev->dev.of_node;
2336         unsigned long tmp_addr = 0;
2337         struct usb_device_para __iomem *usbpram;
2338         unsigned int i;
2339         u64 size;
2340         u32 offset;
2341
2342         udc = kzalloc(sizeof(*udc), GFP_KERNEL);
2343         if (!udc)
2344                 goto cleanup;
2345
2346         udc->dev = &ofdev->dev;
2347
2348         /* get default address of usb parameter in MURAM from device tree */
2349         offset = *of_get_address(np, 1, &size, NULL);
2350         udc->usb_param = cpm_muram_addr(offset);
2351         memset_io(udc->usb_param, 0, size);
2352
2353         usbpram = udc->usb_param;
2354         out_be16(&usbpram->frame_n, 0);
2355         out_be32(&usbpram->rstate, 0);
2356
2357         tmp_addr = cpm_muram_alloc((USB_MAX_ENDPOINTS *
2358                                         sizeof(struct usb_ep_para)),
2359                                            USB_EP_PARA_ALIGNMENT);
2360         if (IS_ERR_VALUE(tmp_addr))
2361                 goto cleanup;
2362
2363         for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
2364                 out_be16(&usbpram->epptr[i], (u16)tmp_addr);
2365                 udc->ep_param[i] = cpm_muram_addr(tmp_addr);
2366                 tmp_addr += 32;
2367         }
2368
2369         memset_io(udc->ep_param[0], 0,
2370                         USB_MAX_ENDPOINTS * sizeof(struct usb_ep_para));
2371
2372         udc->resume_state = USB_STATE_NOTATTACHED;
2373         udc->usb_state = USB_STATE_POWERED;
2374         udc->ep0_dir = 0;
2375
2376         spin_lock_init(&udc->lock);
2377         return udc;
2378
2379 cleanup:
2380         kfree(udc);
2381         return NULL;
2382 }
2383
2384 /* USB Controller register init */
2385 static int qe_udc_reg_init(struct qe_udc *udc)
2386 {
2387         struct usb_ctlr __iomem *qe_usbregs;
2388         qe_usbregs = udc->usb_regs;
2389
2390         /* Spec says that we must enable the USB controller to change mode. */
2391         out_8(&qe_usbregs->usb_usmod, 0x01);
2392         /* Mode changed, now disable it, since muram isn't initialized yet. */
2393         out_8(&qe_usbregs->usb_usmod, 0x00);
2394
2395         /* Initialize the rest. */
2396         out_be16(&qe_usbregs->usb_usbmr, 0);
2397         out_8(&qe_usbregs->usb_uscom, 0);
2398         out_be16(&qe_usbregs->usb_usber, USBER_ALL_CLEAR);
2399
2400         return 0;
2401 }
2402
2403 static int qe_ep_config(struct qe_udc *udc, unsigned char pipe_num)
2404 {
2405         struct qe_ep *ep = &udc->eps[pipe_num];
2406
2407         ep->udc = udc;
2408         strcpy(ep->name, ep_name[pipe_num]);
2409         ep->ep.name = ep_name[pipe_num];
2410
2411         if (pipe_num == 0) {
2412                 ep->ep.caps.type_control = true;
2413         } else {
2414                 ep->ep.caps.type_iso = true;
2415                 ep->ep.caps.type_bulk = true;
2416                 ep->ep.caps.type_int = true;
2417         }
2418
2419         ep->ep.caps.dir_in = true;
2420         ep->ep.caps.dir_out = true;
2421
2422         ep->ep.ops = &qe_ep_ops;
2423         ep->stopped = 1;
2424         usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
2425         ep->ep.desc = NULL;
2426         ep->dir = 0xff;
2427         ep->epnum = (u8)pipe_num;
2428         ep->sent = 0;
2429         ep->last = 0;
2430         ep->init = 0;
2431         ep->rxframe = NULL;
2432         ep->txframe = NULL;
2433         ep->tx_req = NULL;
2434         ep->state = EP_STATE_IDLE;
2435         ep->has_data = 0;
2436
2437         /* the queue lists any req for this ep */
2438         INIT_LIST_HEAD(&ep->queue);
2439
2440         /* gagdet.ep_list used for ep_autoconfig so no ep0*/
2441         if (pipe_num != 0)
2442                 list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
2443
2444         ep->gadget = &udc->gadget;
2445
2446         return 0;
2447 }
2448
2449 /*-----------------------------------------------------------------------
2450  *      UDC device Driver operation functions                           *
2451  *----------------------------------------------------------------------*/
2452 static void qe_udc_release(struct device *dev)
2453 {
2454         struct qe_udc *udc = container_of(dev, struct qe_udc, gadget.dev);
2455         int i;
2456
2457         complete(udc->done);
2458         cpm_muram_free(cpm_muram_offset(udc->ep_param[0]));
2459         for (i = 0; i < USB_MAX_ENDPOINTS; i++)
2460                 udc->ep_param[i] = NULL;
2461
2462         kfree(udc);
2463 }
2464
2465 /* Driver probe functions */
2466 static const struct of_device_id qe_udc_match[];
2467 static int qe_udc_probe(struct platform_device *ofdev)
2468 {
2469         struct qe_udc *udc;
2470         const struct of_device_id *match;
2471         struct device_node *np = ofdev->dev.of_node;
2472         struct qe_ep *ep;
2473         unsigned int ret = 0;
2474         unsigned int i;
2475         const void *prop;
2476
2477         match = of_match_device(qe_udc_match, &ofdev->dev);
2478         if (!match)
2479                 return -EINVAL;
2480
2481         prop = of_get_property(np, "mode", NULL);
2482         if (!prop || strcmp(prop, "peripheral"))
2483                 return -ENODEV;
2484
2485         /* Initialize the udc structure including QH member and other member */
2486         udc = qe_udc_config(ofdev);
2487         if (!udc) {
2488                 dev_err(&ofdev->dev, "failed to initialize\n");
2489                 return -ENOMEM;
2490         }
2491
2492         udc->soc_type = (unsigned long)match->data;
2493         udc->usb_regs = of_iomap(np, 0);
2494         if (!udc->usb_regs) {
2495                 ret = -ENOMEM;
2496                 goto err1;
2497         }
2498
2499         /* initialize usb hw reg except for regs for EP,
2500          * leave usbintr reg untouched*/
2501         qe_udc_reg_init(udc);
2502
2503         /* here comes the stand operations for probe
2504          * set the qe_udc->gadget.xxx */
2505         udc->gadget.ops = &qe_gadget_ops;
2506
2507         /* gadget.ep0 is a pointer */
2508         udc->gadget.ep0 = &udc->eps[0].ep;
2509
2510         INIT_LIST_HEAD(&udc->gadget.ep_list);
2511
2512         /* modify in register gadget process */
2513         udc->gadget.speed = USB_SPEED_UNKNOWN;
2514
2515         /* name: Identifies the controller hardware type. */
2516         udc->gadget.name = driver_name;
2517         udc->gadget.dev.parent = &ofdev->dev;
2518
2519         /* initialize qe_ep struct */
2520         for (i = 0; i < USB_MAX_ENDPOINTS ; i++) {
2521                 /* because the ep type isn't decide here so
2522                  * qe_ep_init() should be called in ep_enable() */
2523
2524                 /* setup the qe_ep struct and link ep.ep.list
2525                  * into gadget.ep_list */
2526                 qe_ep_config(udc, (unsigned char)i);
2527         }
2528
2529         /* ep0 initialization in here */
2530         ret = qe_ep_init(udc, 0, &qe_ep0_desc);
2531         if (ret)
2532                 goto err2;
2533
2534         /* create a buf for ZLP send, need to remain zeroed */
2535         udc->nullbuf = devm_kzalloc(&ofdev->dev, 256, GFP_KERNEL);
2536         if (udc->nullbuf == NULL) {
2537                 ret = -ENOMEM;
2538                 goto err3;
2539         }
2540
2541         /* buffer for data of get_status request */
2542         udc->statusbuf = devm_kzalloc(&ofdev->dev, 2, GFP_KERNEL);
2543         if (udc->statusbuf == NULL) {
2544                 ret = -ENOMEM;
2545                 goto err3;
2546         }
2547
2548         udc->nullp = virt_to_phys((void *)udc->nullbuf);
2549         if (udc->nullp == DMA_ADDR_INVALID) {
2550                 udc->nullp = dma_map_single(
2551                                         udc->gadget.dev.parent,
2552                                         udc->nullbuf,
2553                                         256,
2554                                         DMA_TO_DEVICE);
2555                 udc->nullmap = 1;
2556         } else {
2557                 dma_sync_single_for_device(udc->gadget.dev.parent,
2558                                         udc->nullp, 256,
2559                                         DMA_TO_DEVICE);
2560         }
2561
2562         tasklet_setup(&udc->rx_tasklet, ep_rx_tasklet);
2563         /* request irq and disable DR  */
2564         udc->usb_irq = irq_of_parse_and_map(np, 0);
2565         if (!udc->usb_irq) {
2566                 ret = -EINVAL;
2567                 goto err_noirq;
2568         }
2569
2570         ret = request_irq(udc->usb_irq, qe_udc_irq, 0,
2571                                 driver_name, udc);
2572         if (ret) {
2573                 dev_err(udc->dev, "cannot request irq %d err %d\n",
2574                                 udc->usb_irq, ret);
2575                 goto err4;
2576         }
2577
2578         ret = usb_add_gadget_udc_release(&ofdev->dev, &udc->gadget,
2579                         qe_udc_release);
2580         if (ret)
2581                 goto err5;
2582
2583         platform_set_drvdata(ofdev, udc);
2584         dev_info(udc->dev,
2585                         "%s USB controller initialized as device\n",
2586                         (udc->soc_type == PORT_QE) ? "QE" : "CPM");
2587         return 0;
2588
2589 err5:
2590         free_irq(udc->usb_irq, udc);
2591 err4:
2592         irq_dispose_mapping(udc->usb_irq);
2593 err_noirq:
2594         if (udc->nullmap) {
2595                 dma_unmap_single(udc->gadget.dev.parent,
2596                         udc->nullp, 256,
2597                                 DMA_TO_DEVICE);
2598                         udc->nullp = DMA_ADDR_INVALID;
2599         } else {
2600                 dma_sync_single_for_cpu(udc->gadget.dev.parent,
2601                         udc->nullp, 256,
2602                                 DMA_TO_DEVICE);
2603         }
2604 err3:
2605         ep = &udc->eps[0];
2606         cpm_muram_free(cpm_muram_offset(ep->rxbase));
2607         kfree(ep->rxframe);
2608         kfree(ep->rxbuffer);
2609         kfree(ep->txframe);
2610 err2:
2611         iounmap(udc->usb_regs);
2612 err1:
2613         kfree(udc);
2614         return ret;
2615 }
2616
2617 #ifdef CONFIG_PM
2618 static int qe_udc_suspend(struct platform_device *dev, pm_message_t state)
2619 {
2620         return -ENOTSUPP;
2621 }
2622
2623 static int qe_udc_resume(struct platform_device *dev)
2624 {
2625         return -ENOTSUPP;
2626 }
2627 #endif
2628
2629 static int qe_udc_remove(struct platform_device *ofdev)
2630 {
2631         struct qe_udc *udc = platform_get_drvdata(ofdev);
2632         struct qe_ep *ep;
2633         unsigned int size;
2634         DECLARE_COMPLETION_ONSTACK(done);
2635
2636         usb_del_gadget_udc(&udc->gadget);
2637
2638         udc->done = &done;
2639         tasklet_disable(&udc->rx_tasklet);
2640
2641         if (udc->nullmap) {
2642                 dma_unmap_single(udc->gadget.dev.parent,
2643                         udc->nullp, 256,
2644                                 DMA_TO_DEVICE);
2645                         udc->nullp = DMA_ADDR_INVALID;
2646         } else {
2647                 dma_sync_single_for_cpu(udc->gadget.dev.parent,
2648                         udc->nullp, 256,
2649                                 DMA_TO_DEVICE);
2650         }
2651
2652         ep = &udc->eps[0];
2653         cpm_muram_free(cpm_muram_offset(ep->rxbase));
2654         size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (USB_BDRING_LEN + 1);
2655
2656         kfree(ep->rxframe);
2657         if (ep->rxbufmap) {
2658                 dma_unmap_single(udc->gadget.dev.parent,
2659                                 ep->rxbuf_d, size,
2660                                 DMA_FROM_DEVICE);
2661                 ep->rxbuf_d = DMA_ADDR_INVALID;
2662         } else {
2663                 dma_sync_single_for_cpu(udc->gadget.dev.parent,
2664                                 ep->rxbuf_d, size,
2665                                 DMA_FROM_DEVICE);
2666         }
2667
2668         kfree(ep->rxbuffer);
2669         kfree(ep->txframe);
2670
2671         free_irq(udc->usb_irq, udc);
2672         irq_dispose_mapping(udc->usb_irq);
2673
2674         tasklet_kill(&udc->rx_tasklet);
2675
2676         iounmap(udc->usb_regs);
2677
2678         /* wait for release() of gadget.dev to free udc */
2679         wait_for_completion(&done);
2680
2681         return 0;
2682 }
2683
2684 /*-------------------------------------------------------------------------*/
2685 static const struct of_device_id qe_udc_match[] = {
2686         {
2687                 .compatible = "fsl,mpc8323-qe-usb",
2688                 .data = (void *)PORT_QE,
2689         },
2690         {
2691                 .compatible = "fsl,mpc8360-qe-usb",
2692                 .data = (void *)PORT_QE,
2693         },
2694         {
2695                 .compatible = "fsl,mpc8272-cpm-usb",
2696                 .data = (void *)PORT_CPM,
2697         },
2698         {},
2699 };
2700
2701 MODULE_DEVICE_TABLE(of, qe_udc_match);
2702
2703 static struct platform_driver udc_driver = {
2704         .driver = {
2705                 .name = driver_name,
2706                 .of_match_table = qe_udc_match,
2707         },
2708         .probe          = qe_udc_probe,
2709         .remove         = qe_udc_remove,
2710 #ifdef CONFIG_PM
2711         .suspend        = qe_udc_suspend,
2712         .resume         = qe_udc_resume,
2713 #endif
2714 };
2715
2716 module_platform_driver(udc_driver);
2717
2718 MODULE_DESCRIPTION(DRIVER_DESC);
2719 MODULE_AUTHOR(DRIVER_AUTHOR);
2720 MODULE_LICENSE("GPL");