drivers/usb/dwc3/dwc3-qcom.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /* Copyright (c) 2018, The Linux Foundation. All rights reserved.
   3  *
   4  * Inspired by dwc3-of-simple.c
   5  */
   6
   7 #include <linux/acpi.h>
   8 #include <linux/io.h>
   9 #include <linux/of.h>
  10 #include <linux/clk.h>
  11 #include <linux/irq.h>
  12 #include <linux/of_clk.h>
  13 #include <linux/module.h>
  14 #include <linux/kernel.h>
  15 #include <linux/extcon.h>
  16 #include <linux/interconnect.h>
  17 #include <linux/of_platform.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/phy/phy.h>
  20 #include <linux/usb/of.h>
  21 #include <linux/reset.h>
  22 #include <linux/iopoll.h>
  23
  24 #include "core.h"
  25
  26 /* USB QSCRATCH Hardware registers */
  27 #define QSCRATCH_HS_PHY_CTRL                    0x10
  28 #define UTMI_OTG_VBUS_VALID                     BIT(20)
  29 #define SW_SESSVLD_SEL                          BIT(28)
  30
  31 #define QSCRATCH_SS_PHY_CTRL                    0x30
  32 #define LANE0_PWR_PRESENT                       BIT(24)
  33
  34 #define QSCRATCH_GENERAL_CFG                    0x08
  35 #define PIPE_UTMI_CLK_SEL                       BIT(0)
  36 #define PIPE3_PHYSTATUS_SW                      BIT(3)
  37 #define PIPE_UTMI_CLK_DIS                       BIT(8)
  38
  39 #define PWR_EVNT_IRQ_STAT_REG                   0x58
  40 #define PWR_EVNT_LPM_IN_L2_MASK                 BIT(4)
  41 #define PWR_EVNT_LPM_OUT_L2_MASK                BIT(5)
  42
  43 #define SDM845_QSCRATCH_BASE_OFFSET             0xf8800
  44 #define SDM845_QSCRATCH_SIZE                    0x400
  45 #define SDM845_DWC3_CORE_SIZE                   0xcd00
  46
  47 /* Interconnect path bandwidths in MBps */
  48 #define USB_MEMORY_AVG_HS_BW MBps_to_icc(240)
  49 #define USB_MEMORY_PEAK_HS_BW MBps_to_icc(700)
  50 #define USB_MEMORY_AVG_SS_BW  MBps_to_icc(1000)
  51 #define USB_MEMORY_PEAK_SS_BW MBps_to_icc(2500)
  52 #define APPS_USB_AVG_BW 0
  53 #define APPS_USB_PEAK_BW MBps_to_icc(40)
  54
  55 struct dwc3_acpi_pdata {
  56         u32                     qscratch_base_offset;
  57         u32                     qscratch_base_size;
  58         u32                     dwc3_core_base_size;
  59         int                     hs_phy_irq_index;
  60         int                     dp_hs_phy_irq_index;
  61         int                     dm_hs_phy_irq_index;
  62         int                     ss_phy_irq_index;
  63         bool                    is_urs;
  64 };
  65
  66 struct dwc3_qcom {
  67         struct device           *dev;
  68         void __iomem            *qscratch_base;
  69         struct platform_device  *dwc3;
  70         struct platform_device  *urs_usb;
  71         struct clk              **clks;
  72         int                     num_clocks;
  73         struct reset_control    *resets;
  74
  75         int                     hs_phy_irq;
  76         int                     dp_hs_phy_irq;
  77         int                     dm_hs_phy_irq;
  78         int                     ss_phy_irq;
  79
  80         struct extcon_dev       *edev;
  81         struct extcon_dev       *host_edev;
  82         struct notifier_block   vbus_nb;
  83         struct notifier_block   host_nb;
  84
  85         const struct dwc3_acpi_pdata *acpi_pdata;
  86
  87         enum usb_dr_mode        mode;
  88         bool                    is_suspended;
  89         bool                    pm_suspended;
  90         struct icc_path         *icc_path_ddr;
  91         struct icc_path         *icc_path_apps;
  92 };
  93
  94 static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
  95 {
  96         u32 reg;
  97
  98         reg = readl(base + offset);
  99         reg |= val;
 100         writel(reg, base + offset);
 101
 102         /* ensure that above write is through */
 103         readl(base + offset);
 104 }
 105
 106 static inline void dwc3_qcom_clrbits(void __iomem *base, u32 offset, u32 val)
 107 {
 108         u32 reg;
 109
 110         reg = readl(base + offset);
 111         reg &= ~val;
 112         writel(reg, base + offset);
 113
 114         /* ensure that above write is through */
 115         readl(base + offset);
 116 }
 117
 118 static void dwc3_qcom_vbus_overrride_enable(struct dwc3_qcom *qcom, bool enable)
 119 {
 120         if (enable) {
 121                 dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
 122                                   LANE0_PWR_PRESENT);
 123                 dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL,
 124                                   UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL);
 125         } else {
 126                 dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
 127                                   LANE0_PWR_PRESENT);
 128                 dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL,
 129                                   UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL);
 130         }
 131 }
 132
 133 static int dwc3_qcom_vbus_notifier(struct notifier_block *nb,
 134                                    unsigned long event, void *ptr)
 135 {
 136         struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, vbus_nb);
 137
 138         /* enable vbus override for device mode */
 139         dwc3_qcom_vbus_overrride_enable(qcom, event);
 140         qcom->mode = event ? USB_DR_MODE_PERIPHERAL : USB_DR_MODE_HOST;
 141
 142         return NOTIFY_DONE;
 143 }
 144
 145 static int dwc3_qcom_host_notifier(struct notifier_block *nb,
 146                                    unsigned long event, void *ptr)
 147 {
 148         struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, host_nb);
 149
 150         /* disable vbus override in host mode */
 151         dwc3_qcom_vbus_overrride_enable(qcom, !event);
 152         qcom->mode = event ? USB_DR_MODE_HOST : USB_DR_MODE_PERIPHERAL;
 153
 154         return NOTIFY_DONE;
 155 }
 156
 157 static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom)
 158 {
 159         struct device           *dev = qcom->dev;
 160         struct extcon_dev       *host_edev;
 161         int                     ret;
 162
 163         if (!of_property_read_bool(dev->of_node, "extcon"))
 164                 return 0;
 165
 166         qcom->edev = extcon_get_edev_by_phandle(dev, 0);
 167         if (IS_ERR(qcom->edev))
 168                 return PTR_ERR(qcom->edev);
 169
 170         qcom->vbus_nb.notifier_call = dwc3_qcom_vbus_notifier;
 171
 172         qcom->host_edev = extcon_get_edev_by_phandle(dev, 1);
 173         if (IS_ERR(qcom->host_edev))
 174                 qcom->host_edev = NULL;
 175
 176         ret = devm_extcon_register_notifier(dev, qcom->edev, EXTCON_USB,
 177                                             &qcom->vbus_nb);
 178         if (ret < 0) {
 179                 dev_err(dev, "VBUS notifier register failed\n");
 180                 return ret;
 181         }
 182
 183         if (qcom->host_edev)
 184                 host_edev = qcom->host_edev;
 185         else
 186                 host_edev = qcom->edev;
 187
 188         qcom->host_nb.notifier_call = dwc3_qcom_host_notifier;
 189         ret = devm_extcon_register_notifier(dev, host_edev, EXTCON_USB_HOST,
 190                                             &qcom->host_nb);
 191         if (ret < 0) {
 192                 dev_err(dev, "Host notifier register failed\n");
 193                 return ret;
 194         }
 195
 196         /* Update initial VBUS override based on extcon state */
 197         if (extcon_get_state(qcom->edev, EXTCON_USB) ||
 198             !extcon_get_state(host_edev, EXTCON_USB_HOST))
 199                 dwc3_qcom_vbus_notifier(&qcom->vbus_nb, true, qcom->edev);
 200         else
 201                 dwc3_qcom_vbus_notifier(&qcom->vbus_nb, false, qcom->edev);
 202
 203         return 0;
 204 }
 205
 206 static int dwc3_qcom_interconnect_enable(struct dwc3_qcom *qcom)
 207 {
 208         int ret;
 209
 210         ret = icc_enable(qcom->icc_path_ddr);
 211         if (ret)
 212                 return ret;
 213
 214         ret = icc_enable(qcom->icc_path_apps);
 215         if (ret)
 216                 icc_disable(qcom->icc_path_ddr);
 217
 218         return ret;
 219 }
 220
 221 static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom)
 222 {
 223         int ret;
 224
 225         ret = icc_disable(qcom->icc_path_ddr);
 226         if (ret)
 227                 return ret;
 228
 229         ret = icc_disable(qcom->icc_path_apps);
 230         if (ret)
 231                 icc_enable(qcom->icc_path_ddr);
 232
 233         return ret;
 234 }
 235
 236 /**
 237  * dwc3_qcom_interconnect_init() - Get interconnect path handles
 238  * and set bandwidth.
 239  * @qcom:                       Pointer to the concerned usb core.
 240  *
 241  */
 242 static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
 243 {
 244         struct device *dev = qcom->dev;
 245         int ret;
 246
 247         if (has_acpi_companion(dev))
 248                 return 0;
 249
 250         qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr");
 251         if (IS_ERR(qcom->icc_path_ddr)) {
 252                 dev_err(dev, "failed to get usb-ddr path: %ld\n",
 253                         PTR_ERR(qcom->icc_path_ddr));
 254                 return PTR_ERR(qcom->icc_path_ddr);
 255         }
 256
 257         qcom->icc_path_apps = of_icc_get(dev, "apps-usb");
 258         if (IS_ERR(qcom->icc_path_apps)) {
 259                 dev_err(dev, "failed to get apps-usb path: %ld\n",
 260                                 PTR_ERR(qcom->icc_path_apps));
 261                 return PTR_ERR(qcom->icc_path_apps);
 262         }
 263
 264         if (usb_get_maximum_speed(&qcom->dwc3->dev) >= USB_SPEED_SUPER ||
 265                         usb_get_maximum_speed(&qcom->dwc3->dev) == USB_SPEED_UNKNOWN)
 266                 ret = icc_set_bw(qcom->icc_path_ddr,
 267                         USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW);
 268         else
 269                 ret = icc_set_bw(qcom->icc_path_ddr,
 270                         USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW);
 271
 272         if (ret) {
 273                 dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret);
 274                 return ret;
 275         }
 276
 277         ret = icc_set_bw(qcom->icc_path_apps,
 278                 APPS_USB_AVG_BW, APPS_USB_PEAK_BW);
 279         if (ret) {
 280                 dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret);
 281                 return ret;
 282         }
 283
 284         return 0;
 285 }
 286
 287 /**
 288  * dwc3_qcom_interconnect_exit() - Release interconnect path handles
 289  * @qcom:                       Pointer to the concerned usb core.
 290  *
 291  * This function is used to release interconnect path handle.
 292  */
 293 static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
 294 {
 295         icc_put(qcom->icc_path_ddr);
 296         icc_put(qcom->icc_path_apps);
 297 }
 298
 299 static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
 300 {
 301         if (qcom->hs_phy_irq) {
 302                 disable_irq_wake(qcom->hs_phy_irq);
 303                 disable_irq_nosync(qcom->hs_phy_irq);
 304         }
 305
 306         if (qcom->dp_hs_phy_irq) {
 307                 disable_irq_wake(qcom->dp_hs_phy_irq);
 308                 disable_irq_nosync(qcom->dp_hs_phy_irq);
 309         }
 310
 311         if (qcom->dm_hs_phy_irq) {
 312                 disable_irq_wake(qcom->dm_hs_phy_irq);
 313                 disable_irq_nosync(qcom->dm_hs_phy_irq);
 314         }
 315
 316         if (qcom->ss_phy_irq) {
 317                 disable_irq_wake(qcom->ss_phy_irq);
 318                 disable_irq_nosync(qcom->ss_phy_irq);
 319         }
 320 }
 321
 322 static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
 323 {
 324         if (qcom->hs_phy_irq) {
 325                 enable_irq(qcom->hs_phy_irq);
 326                 enable_irq_wake(qcom->hs_phy_irq);
 327         }
 328
 329         if (qcom->dp_hs_phy_irq) {
 330                 enable_irq(qcom->dp_hs_phy_irq);
 331                 enable_irq_wake(qcom->dp_hs_phy_irq);
 332         }
 333
 334         if (qcom->dm_hs_phy_irq) {
 335                 enable_irq(qcom->dm_hs_phy_irq);
 336                 enable_irq_wake(qcom->dm_hs_phy_irq);
 337         }
 338
 339         if (qcom->ss_phy_irq) {
 340                 enable_irq(qcom->ss_phy_irq);
 341                 enable_irq_wake(qcom->ss_phy_irq);
 342         }
 343 }
 344
 345 static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
 346 {
 347         u32 val;
 348         int i, ret;
 349
 350         if (qcom->is_suspended)
 351                 return 0;
 352
 353         val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
 354         if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
 355                 dev_err(qcom->dev, "HS-PHY not in L2\n");
 356
 357         for (i = qcom->num_clocks - 1; i >= 0; i--)
 358                 clk_disable_unprepare(qcom->clks[i]);
 359
 360         ret = dwc3_qcom_interconnect_disable(qcom);
 361         if (ret)
 362                 dev_warn(qcom->dev, "failed to disable interconnect: %d\n", ret);
 363
 364         if (device_may_wakeup(qcom->dev))
 365                 dwc3_qcom_enable_interrupts(qcom);
 366
 367         qcom->is_suspended = true;
 368
 369         return 0;
 370 }
 371
 372 static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
 373 {
 374         int ret;
 375         int i;
 376
 377         if (!qcom->is_suspended)
 378                 return 0;
 379
 380         if (device_may_wakeup(qcom->dev))
 381                 dwc3_qcom_disable_interrupts(qcom);
 382
 383         for (i = 0; i < qcom->num_clocks; i++) {
 384                 ret = clk_prepare_enable(qcom->clks[i]);
 385                 if (ret < 0) {
 386                         while (--i >= 0)
 387                                 clk_disable_unprepare(qcom->clks[i]);
 388                         return ret;
 389                 }
 390         }
 391
 392         ret = dwc3_qcom_interconnect_enable(qcom);
 393         if (ret)
 394                 dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
 395
 396         /* Clear existing events from PHY related to L2 in/out */
 397         dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
 398                           PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
 399
 400         qcom->is_suspended = false;
 401
 402         return 0;
 403 }
 404
 405 static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data)
 406 {
 407         struct dwc3_qcom *qcom = data;
 408         struct dwc3     *dwc = platform_get_drvdata(qcom->dwc3);
 409
 410         /* If pm_suspended then let pm_resume take care of resuming h/w */
 411         if (qcom->pm_suspended)
 412                 return IRQ_HANDLED;
 413
 414         if (dwc->xhci)
 415                 pm_runtime_resume(&dwc->xhci->dev);
 416
 417         return IRQ_HANDLED;
 418 }
 419
 420 static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
 421 {
 422         /* Configure dwc3 to use UTMI clock as PIPE clock not present */
 423         dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
 424                           PIPE_UTMI_CLK_DIS);
 425
 426         usleep_range(100, 1000);
 427
 428         dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
 429                           PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW);
 430
 431         usleep_range(100, 1000);
 432
 433         dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
 434                           PIPE_UTMI_CLK_DIS);
 435 }
 436
 437 static int dwc3_qcom_get_irq(struct platform_device *pdev,
 438                              const char *name, int num)
 439 {
 440         struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
 441         struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : pdev;
 442         struct device_node *np = pdev->dev.of_node;
 443         int ret;
 444
 445         if (np)
 446                 ret = platform_get_irq_byname(pdev_irq, name);
 447         else
 448                 ret = platform_get_irq(pdev_irq, num);
 449
 450         return ret;
 451 }
 452
 453 static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 454 {
 455         struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
 456         const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
 457         int irq;
 458         int ret;
 459
 460         irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq",
 461                                 pdata ? pdata->hs_phy_irq_index : -1);
 462         if (irq > 0) {
 463                 /* Keep wakeup interrupts disabled until suspend */
 464                 irq_set_status_flags(irq, IRQ_NOAUTOEN);
 465                 ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 466                                         qcom_dwc3_resume_irq,
 467                                         IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
 468                                         "qcom_dwc3 HS", qcom);
 469                 if (ret) {
 470                         dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
 471                         return ret;
 472                 }
 473                 qcom->hs_phy_irq = irq;
 474         }
 475
 476         irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
 477                                 pdata ? pdata->dp_hs_phy_irq_index : -1);
 478         if (irq > 0) {
 479                 irq_set_status_flags(irq, IRQ_NOAUTOEN);
 480                 ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 481                                         qcom_dwc3_resume_irq,
 482                                         IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
 483                                         "qcom_dwc3 DP_HS", qcom);
 484                 if (ret) {
 485                         dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
 486                         return ret;
 487                 }
 488                 qcom->dp_hs_phy_irq = irq;
 489         }
 490
 491         irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
 492                                 pdata ? pdata->dm_hs_phy_irq_index : -1);
 493         if (irq > 0) {
 494                 irq_set_status_flags(irq, IRQ_NOAUTOEN);
 495                 ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 496                                         qcom_dwc3_resume_irq,
 497                                         IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
 498                                         "qcom_dwc3 DM_HS", qcom);
 499                 if (ret) {
 500                         dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
 501                         return ret;
 502                 }
 503                 qcom->dm_hs_phy_irq = irq;
 504         }
 505
 506         irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
 507                                 pdata ? pdata->ss_phy_irq_index : -1);
 508         if (irq > 0) {
 509                 irq_set_status_flags(irq, IRQ_NOAUTOEN);
 510                 ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 511                                         qcom_dwc3_resume_irq,
 512                                         IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
 513                                         "qcom_dwc3 SS", qcom);
 514                 if (ret) {
 515                         dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
 516                         return ret;
 517                 }
 518                 qcom->ss_phy_irq = irq;
 519         }
 520
 521         return 0;
 522 }
 523
 524 static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
 525 {
 526         struct device           *dev = qcom->dev;
 527         struct device_node      *np = dev->of_node;
 528         int                     i;
 529
 530         if (!np || !count)
 531                 return 0;
 532
 533         if (count < 0)
 534                 return count;
 535
 536         qcom->num_clocks = count;
 537
 538         qcom->clks = devm_kcalloc(dev, qcom->num_clocks,
 539                                   sizeof(struct clk *), GFP_KERNEL);
 540         if (!qcom->clks)
 541                 return -ENOMEM;
 542
 543         for (i = 0; i < qcom->num_clocks; i++) {
 544                 struct clk      *clk;
 545                 int             ret;
 546
 547                 clk = of_clk_get(np, i);
 548                 if (IS_ERR(clk)) {
 549                         while (--i >= 0)
 550                                 clk_put(qcom->clks[i]);
 551                         return PTR_ERR(clk);
 552                 }
 553
 554                 ret = clk_prepare_enable(clk);
 555                 if (ret < 0) {
 556                         while (--i >= 0) {
 557                                 clk_disable_unprepare(qcom->clks[i]);
 558                                 clk_put(qcom->clks[i]);
 559                         }
 560                         clk_put(clk);
 561
 562                         return ret;
 563                 }
 564
 565                 qcom->clks[i] = clk;
 566         }
 567
 568         return 0;
 569 }
 570
 571 static const struct property_entry dwc3_qcom_acpi_properties[] = {
 572         PROPERTY_ENTRY_STRING("dr_mode", "host"),
 573         {}
 574 };
 575
 576 static const struct software_node dwc3_qcom_swnode = {
 577         .properties = dwc3_qcom_acpi_properties,
 578 };
 579
 580 static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
 581 {
 582         struct dwc3_qcom        *qcom = platform_get_drvdata(pdev);
 583         struct device           *dev = &pdev->dev;
 584         struct resource         *res, *child_res = NULL;
 585         struct platform_device  *pdev_irq = qcom->urs_usb ? qcom->urs_usb :
 586                                                             pdev;
 587         int                     irq;
 588         int                     ret;
 589
 590         qcom->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
 591         if (!qcom->dwc3)
 592                 return -ENOMEM;
 593
 594         qcom->dwc3->dev.parent = dev;
 595         qcom->dwc3->dev.type = dev->type;
 596         qcom->dwc3->dev.dma_mask = dev->dma_mask;
 597         qcom->dwc3->dev.dma_parms = dev->dma_parms;
 598         qcom->dwc3->dev.coherent_dma_mask = dev->coherent_dma_mask;
 599
 600         child_res = kcalloc(2, sizeof(*child_res), GFP_KERNEL);
 601         if (!child_res)
 602                 return -ENOMEM;
 603
 604         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 605         if (!res) {
 606                 dev_err(&pdev->dev, "failed to get memory resource\n");
 607                 ret = -ENODEV;
 608                 goto out;
 609         }
 610
 611         child_res[0].flags = res->flags;
 612         child_res[0].start = res->start;
 613         child_res[0].end = child_res[0].start +
 614                 qcom->acpi_pdata->dwc3_core_base_size;
 615
 616         irq = platform_get_irq(pdev_irq, 0);
 617         child_res[1].flags = IORESOURCE_IRQ;
 618         child_res[1].start = child_res[1].end = irq;
 619
 620         ret = platform_device_add_resources(qcom->dwc3, child_res, 2);
 621         if (ret) {
 622                 dev_err(&pdev->dev, "failed to add resources\n");
 623                 goto out;
 624         }
 625
 626         ret = device_add_software_node(&qcom->dwc3->dev, &dwc3_qcom_swnode);
 627         if (ret < 0) {
 628                 dev_err(&pdev->dev, "failed to add properties\n");
 629                 goto out;
 630         }
 631
 632         ret = platform_device_add(qcom->dwc3);
 633         if (ret) {
 634                 dev_err(&pdev->dev, "failed to add device\n");
 635                 device_remove_software_node(&qcom->dwc3->dev);
 636         }
 637
 638 out:
 639         kfree(child_res);
 640         return ret;
 641 }
 642
 643 static int dwc3_qcom_of_register_core(struct platform_device *pdev)
 644 {
 645         struct dwc3_qcom        *qcom = platform_get_drvdata(pdev);
 646         struct device_node      *np = pdev->dev.of_node, *dwc3_np;
 647         struct device           *dev = &pdev->dev;
 648         int                     ret;
 649
 650         dwc3_np = of_get_compatible_child(np, "snps,dwc3");
 651         if (!dwc3_np) {
 652                 dev_err(dev, "failed to find dwc3 core child\n");
 653                 return -ENODEV;
 654         }
 655
 656         ret = of_platform_populate(np, NULL, NULL, dev);
 657         if (ret) {
 658                 dev_err(dev, "failed to register dwc3 core - %d\n", ret);
 659                 goto node_put;
 660         }
 661
 662         qcom->dwc3 = of_find_device_by_node(dwc3_np);
 663         if (!qcom->dwc3) {
 664                 ret = -ENODEV;
 665                 dev_err(dev, "failed to get dwc3 platform device\n");
 666         }
 667
 668 node_put:
 669         of_node_put(dwc3_np);
 670
 671         return ret;
 672 }
 673
 674 static struct platform_device *
 675 dwc3_qcom_create_urs_usb_platdev(struct device *dev)
 676 {
 677         struct fwnode_handle *fwh;
 678         struct acpi_device *adev;
 679         char name[8];
 680         int ret;
 681         int id;
 682
 683         /* Figure out device id */
 684         ret = sscanf(fwnode_get_name(dev->fwnode), "URS%d", &id);
 685         if (!ret)
 686                 return NULL;
 687
 688         /* Find the child using name */
 689         snprintf(name, sizeof(name), "USB%d", id);
 690         fwh = fwnode_get_named_child_node(dev->fwnode, name);
 691         if (!fwh)
 692                 return NULL;
 693
 694         adev = to_acpi_device_node(fwh);
 695         if (!adev)
 696                 return NULL;
 697
 698         return acpi_create_platform_device(adev, NULL);
 699 }
 700
 701 static int dwc3_qcom_probe(struct platform_device *pdev)
 702 {
 703         struct device_node      *np = pdev->dev.of_node;
 704         struct device           *dev = &pdev->dev;
 705         struct dwc3_qcom        *qcom;
 706         struct resource         *res, *parent_res = NULL;
 707         int                     ret, i;
 708         bool                    ignore_pipe_clk;
 709
 710         qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL);
 711         if (!qcom)
 712                 return -ENOMEM;
 713
 714         platform_set_drvdata(pdev, qcom);
 715         qcom->dev = &pdev->dev;
 716
 717         if (has_acpi_companion(dev)) {
 718                 qcom->acpi_pdata = acpi_device_get_match_data(dev);
 719                 if (!qcom->acpi_pdata) {
 720                         dev_err(&pdev->dev, "no supporting ACPI device data\n");
 721                         return -EINVAL;
 722                 }
 723         }
 724
 725         qcom->resets = devm_reset_control_array_get_optional_exclusive(dev);
 726         if (IS_ERR(qcom->resets)) {
 727                 ret = PTR_ERR(qcom->resets);
 728                 dev_err(&pdev->dev, "failed to get resets, err=%d\n", ret);
 729                 return ret;
 730         }
 731
 732         ret = reset_control_assert(qcom->resets);
 733         if (ret) {
 734                 dev_err(&pdev->dev, "failed to assert resets, err=%d\n", ret);
 735                 return ret;
 736         }
 737
 738         usleep_range(10, 1000);
 739
 740         ret = reset_control_deassert(qcom->resets);
 741         if (ret) {
 742                 dev_err(&pdev->dev, "failed to deassert resets, err=%d\n", ret);
 743                 goto reset_assert;
 744         }
 745
 746         ret = dwc3_qcom_clk_init(qcom, of_clk_get_parent_count(np));
 747         if (ret) {
 748                 dev_err(dev, "failed to get clocks\n");
 749                 goto reset_assert;
 750         }
 751
 752         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 753
 754         if (np) {
 755                 parent_res = res;
 756         } else {
 757                 parent_res = kmemdup(res, sizeof(struct resource), GFP_KERNEL);
 758                 if (!parent_res)
 759                         return -ENOMEM;
 760
 761                 parent_res->start = res->start +
 762                         qcom->acpi_pdata->qscratch_base_offset;
 763                 parent_res->end = parent_res->start +
 764                         qcom->acpi_pdata->qscratch_base_size;
 765
 766                 if (qcom->acpi_pdata->is_urs) {
 767                         qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
 768                         if (!qcom->urs_usb) {
 769                                 dev_err(dev, "failed to create URS USB platdev\n");
 770                                 return -ENODEV;
 771                         }
 772                 }
 773         }
 774
 775         qcom->qscratch_base = devm_ioremap_resource(dev, parent_res);
 776         if (IS_ERR(qcom->qscratch_base)) {
 777                 ret = PTR_ERR(qcom->qscratch_base);
 778                 goto clk_disable;
 779         }
 780
 781         ret = dwc3_qcom_setup_irq(pdev);
 782         if (ret) {
 783                 dev_err(dev, "failed to setup IRQs, err=%d\n", ret);
 784                 goto clk_disable;
 785         }
 786
 787         /*
 788          * Disable pipe_clk requirement if specified. Used when dwc3
 789          * operates without SSPHY and only HS/FS/LS modes are supported.
 790          */
 791         ignore_pipe_clk = device_property_read_bool(dev,
 792                                 "qcom,select-utmi-as-pipe-clk");
 793         if (ignore_pipe_clk)
 794                 dwc3_qcom_select_utmi_clk(qcom);
 795
 796         if (np)
 797                 ret = dwc3_qcom_of_register_core(pdev);
 798         else
 799                 ret = dwc3_qcom_acpi_register_core(pdev);
 800
 801         if (ret) {
 802                 dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret);
 803                 goto depopulate;
 804         }
 805
 806         ret = dwc3_qcom_interconnect_init(qcom);
 807         if (ret)
 808                 goto depopulate;
 809
 810         qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev);
 811
 812         /* enable vbus override for device mode */
 813         if (qcom->mode == USB_DR_MODE_PERIPHERAL)
 814                 dwc3_qcom_vbus_overrride_enable(qcom, true);
 815
 816         /* register extcon to override sw_vbus on Vbus change later */
 817         ret = dwc3_qcom_register_extcon(qcom);
 818         if (ret)
 819                 goto interconnect_exit;
 820
 821         device_init_wakeup(&pdev->dev, 1);
 822         qcom->is_suspended = false;
 823         pm_runtime_set_active(dev);
 824         pm_runtime_enable(dev);
 825         pm_runtime_forbid(dev);
 826
 827         return 0;
 828
 829 interconnect_exit:
 830         dwc3_qcom_interconnect_exit(qcom);
 831 depopulate:
 832         if (np)
 833                 of_platform_depopulate(&pdev->dev);
 834         else
 835                 platform_device_put(pdev);
 836 clk_disable:
 837         for (i = qcom->num_clocks - 1; i >= 0; i--) {
 838                 clk_disable_unprepare(qcom->clks[i]);
 839                 clk_put(qcom->clks[i]);
 840         }
 841 reset_assert:
 842         reset_control_assert(qcom->resets);
 843
 844         return ret;
 845 }
 846
 847 static int dwc3_qcom_remove(struct platform_device *pdev)
 848 {
 849         struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
 850         struct device *dev = &pdev->dev;
 851         int i;
 852
 853         device_remove_software_node(&qcom->dwc3->dev);
 854         of_platform_depopulate(dev);
 855
 856         for (i = qcom->num_clocks - 1; i >= 0; i--) {
 857                 clk_disable_unprepare(qcom->clks[i]);
 858                 clk_put(qcom->clks[i]);
 859         }
 860         qcom->num_clocks = 0;
 861
 862         dwc3_qcom_interconnect_exit(qcom);
 863         reset_control_assert(qcom->resets);
 864
 865         pm_runtime_allow(dev);
 866         pm_runtime_disable(dev);
 867
 868         return 0;
 869 }
 870
 871 static int __maybe_unused dwc3_qcom_pm_suspend(struct device *dev)
 872 {
 873         struct dwc3_qcom *qcom = dev_get_drvdata(dev);
 874         int ret = 0;
 875
 876         ret = dwc3_qcom_suspend(qcom);
 877         if (!ret)
 878                 qcom->pm_suspended = true;
 879
 880         return ret;
 881 }
 882
 883 static int __maybe_unused dwc3_qcom_pm_resume(struct device *dev)
 884 {
 885         struct dwc3_qcom *qcom = dev_get_drvdata(dev);
 886         int ret;
 887
 888         ret = dwc3_qcom_resume(qcom);
 889         if (!ret)
 890                 qcom->pm_suspended = false;
 891
 892         return ret;
 893 }
 894
 895 static int __maybe_unused dwc3_qcom_runtime_suspend(struct device *dev)
 896 {
 897         struct dwc3_qcom *qcom = dev_get_drvdata(dev);
 898
 899         return dwc3_qcom_suspend(qcom);
 900 }
 901
 902 static int __maybe_unused dwc3_qcom_runtime_resume(struct device *dev)
 903 {
 904         struct dwc3_qcom *qcom = dev_get_drvdata(dev);
 905
 906         return dwc3_qcom_resume(qcom);
 907 }
 908
 909 static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = {
 910         SET_SYSTEM_SLEEP_PM_OPS(dwc3_qcom_pm_suspend, dwc3_qcom_pm_resume)
 911         SET_RUNTIME_PM_OPS(dwc3_qcom_runtime_suspend, dwc3_qcom_runtime_resume,
 912                            NULL)
 913 };
 914
 915 static const struct of_device_id dwc3_qcom_of_match[] = {
 916         { .compatible = "qcom,dwc3" },
 917         { .compatible = "qcom,msm8996-dwc3" },
 918         { .compatible = "qcom,msm8998-dwc3" },
 919         { .compatible = "qcom,sdm845-dwc3" },
 920         { }
 921 };
 922 MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match);
 923
 924 #ifdef CONFIG_ACPI
 925 static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
 926         .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
 927         .qscratch_base_size = SDM845_QSCRATCH_SIZE,
 928         .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
 929         .hs_phy_irq_index = 1,
 930         .dp_hs_phy_irq_index = 4,
 931         .dm_hs_phy_irq_index = 3,
 932         .ss_phy_irq_index = 2
 933 };
 934
 935 static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
 936         .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
 937         .qscratch_base_size = SDM845_QSCRATCH_SIZE,
 938         .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
 939         .hs_phy_irq_index = 1,
 940         .dp_hs_phy_irq_index = 4,
 941         .dm_hs_phy_irq_index = 3,
 942         .ss_phy_irq_index = 2,
 943         .is_urs = true,
 944 };
 945
 946 static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
 947         { "QCOM2430", (unsigned long)&sdm845_acpi_pdata },
 948         { "QCOM0304", (unsigned long)&sdm845_acpi_urs_pdata },
 949         { "QCOM0497", (unsigned long)&sdm845_acpi_urs_pdata },
 950         { "QCOM04A6", (unsigned long)&sdm845_acpi_pdata },
 951         { },
 952 };
 953 MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match);
 954 #endif
 955
 956 static struct platform_driver dwc3_qcom_driver = {
 957         .probe          = dwc3_qcom_probe,
 958         .remove         = dwc3_qcom_remove,
 959         .driver         = {
 960                 .name   = "dwc3-qcom",
 961                 .pm     = &dwc3_qcom_dev_pm_ops,
 962                 .of_match_table = dwc3_qcom_of_match,
 963                 .acpi_match_table = ACPI_PTR(dwc3_qcom_acpi_match),
 964         },
 965 };
 966
 967 module_platform_driver(dwc3_qcom_driver);
 968
 969 MODULE_LICENSE("GPL v2");
 970 MODULE_DESCRIPTION("DesignWare DWC3 QCOM Glue Driver");