Merge branch 'work.gfs2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
[linux-2.6-microblaze.git] / drivers / spi / spi-fsl-dspi.c
1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // Copyright 2013 Freescale Semiconductor, Inc.
4 // Copyright 2020 NXP
5 //
6 // Freescale DSPI driver
7 // This file contains a driver for the Freescale DSPI
8
9 #include <linux/clk.h>
10 #include <linux/delay.h>
11 #include <linux/dmaengine.h>
12 #include <linux/dma-mapping.h>
13 #include <linux/interrupt.h>
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/of_device.h>
17 #include <linux/pinctrl/consumer.h>
18 #include <linux/regmap.h>
19 #include <linux/spi/spi.h>
20 #include <linux/spi/spi-fsl-dspi.h>
21
22 #define DRIVER_NAME                     "fsl-dspi"
23
24 #define SPI_MCR                         0x00
25 #define SPI_MCR_MASTER                  BIT(31)
26 #define SPI_MCR_PCSIS(x)                ((x) << 16)
27 #define SPI_MCR_CLR_TXF                 BIT(11)
28 #define SPI_MCR_CLR_RXF                 BIT(10)
29 #define SPI_MCR_XSPI                    BIT(3)
30 #define SPI_MCR_DIS_TXF                 BIT(13)
31 #define SPI_MCR_DIS_RXF                 BIT(12)
32 #define SPI_MCR_HALT                    BIT(0)
33
34 #define SPI_TCR                         0x08
35 #define SPI_TCR_GET_TCNT(x)             (((x) & GENMASK(31, 16)) >> 16)
36
37 #define SPI_CTAR(x)                     (0x0c + (((x) & GENMASK(1, 0)) * 4))
38 #define SPI_CTAR_FMSZ(x)                (((x) << 27) & GENMASK(30, 27))
39 #define SPI_CTAR_CPOL                   BIT(26)
40 #define SPI_CTAR_CPHA                   BIT(25)
41 #define SPI_CTAR_LSBFE                  BIT(24)
42 #define SPI_CTAR_PCSSCK(x)              (((x) << 22) & GENMASK(23, 22))
43 #define SPI_CTAR_PASC(x)                (((x) << 20) & GENMASK(21, 20))
44 #define SPI_CTAR_PDT(x)                 (((x) << 18) & GENMASK(19, 18))
45 #define SPI_CTAR_PBR(x)                 (((x) << 16) & GENMASK(17, 16))
46 #define SPI_CTAR_CSSCK(x)               (((x) << 12) & GENMASK(15, 12))
47 #define SPI_CTAR_ASC(x)                 (((x) << 8) & GENMASK(11, 8))
48 #define SPI_CTAR_DT(x)                  (((x) << 4) & GENMASK(7, 4))
49 #define SPI_CTAR_BR(x)                  ((x) & GENMASK(3, 0))
50 #define SPI_CTAR_SCALE_BITS             0xf
51
52 #define SPI_CTAR0_SLAVE                 0x0c
53
54 #define SPI_SR                          0x2c
55 #define SPI_SR_TCFQF                    BIT(31)
56 #define SPI_SR_TFUF                     BIT(27)
57 #define SPI_SR_TFFF                     BIT(25)
58 #define SPI_SR_CMDTCF                   BIT(23)
59 #define SPI_SR_SPEF                     BIT(21)
60 #define SPI_SR_RFOF                     BIT(19)
61 #define SPI_SR_TFIWF                    BIT(18)
62 #define SPI_SR_RFDF                     BIT(17)
63 #define SPI_SR_CMDFFF                   BIT(16)
64 #define SPI_SR_CLEAR                    (SPI_SR_TCFQF | \
65                                         SPI_SR_TFUF | SPI_SR_TFFF | \
66                                         SPI_SR_CMDTCF | SPI_SR_SPEF | \
67                                         SPI_SR_RFOF | SPI_SR_TFIWF | \
68                                         SPI_SR_RFDF | SPI_SR_CMDFFF)
69
70 #define SPI_RSER_TFFFE                  BIT(25)
71 #define SPI_RSER_TFFFD                  BIT(24)
72 #define SPI_RSER_RFDFE                  BIT(17)
73 #define SPI_RSER_RFDFD                  BIT(16)
74
75 #define SPI_RSER                        0x30
76 #define SPI_RSER_TCFQE                  BIT(31)
77 #define SPI_RSER_CMDTCFE                BIT(23)
78
79 #define SPI_PUSHR                       0x34
80 #define SPI_PUSHR_CMD_CONT              BIT(15)
81 #define SPI_PUSHR_CMD_CTAS(x)           (((x) << 12 & GENMASK(14, 12)))
82 #define SPI_PUSHR_CMD_EOQ               BIT(11)
83 #define SPI_PUSHR_CMD_CTCNT             BIT(10)
84 #define SPI_PUSHR_CMD_PCS(x)            (BIT(x) & GENMASK(5, 0))
85
86 #define SPI_PUSHR_SLAVE                 0x34
87
88 #define SPI_POPR                        0x38
89
90 #define SPI_TXFR0                       0x3c
91 #define SPI_TXFR1                       0x40
92 #define SPI_TXFR2                       0x44
93 #define SPI_TXFR3                       0x48
94 #define SPI_RXFR0                       0x7c
95 #define SPI_RXFR1                       0x80
96 #define SPI_RXFR2                       0x84
97 #define SPI_RXFR3                       0x88
98
99 #define SPI_CTARE(x)                    (0x11c + (((x) & GENMASK(1, 0)) * 4))
100 #define SPI_CTARE_FMSZE(x)              (((x) & 0x1) << 16)
101 #define SPI_CTARE_DTCP(x)               ((x) & 0x7ff)
102
103 #define SPI_SREX                        0x13c
104
105 #define SPI_FRAME_BITS(bits)            SPI_CTAR_FMSZ((bits) - 1)
106 #define SPI_FRAME_EBITS(bits)           SPI_CTARE_FMSZE(((bits) - 1) >> 4)
107
108 #define DMA_COMPLETION_TIMEOUT          msecs_to_jiffies(3000)
109
110 struct chip_data {
111         u32                     ctar_val;
112 };
113
114 enum dspi_trans_mode {
115         DSPI_XSPI_MODE,
116         DSPI_DMA_MODE,
117 };
118
119 struct fsl_dspi_devtype_data {
120         enum dspi_trans_mode    trans_mode;
121         u8                      max_clock_factor;
122         int                     fifo_size;
123 };
124
125 enum {
126         LS1021A,
127         LS1012A,
128         LS1028A,
129         LS1043A,
130         LS1046A,
131         LS2080A,
132         LS2085A,
133         LX2160A,
134         MCF5441X,
135         VF610,
136 };
137
138 static const struct fsl_dspi_devtype_data devtype_data[] = {
139         [VF610] = {
140                 .trans_mode             = DSPI_DMA_MODE,
141                 .max_clock_factor       = 2,
142                 .fifo_size              = 4,
143         },
144         [LS1021A] = {
145                 /* Has A-011218 DMA erratum */
146                 .trans_mode             = DSPI_XSPI_MODE,
147                 .max_clock_factor       = 8,
148                 .fifo_size              = 4,
149         },
150         [LS1012A] = {
151                 /* Has A-011218 DMA erratum */
152                 .trans_mode             = DSPI_XSPI_MODE,
153                 .max_clock_factor       = 8,
154                 .fifo_size              = 16,
155         },
156         [LS1028A] = {
157                 .trans_mode             = DSPI_XSPI_MODE,
158                 .max_clock_factor       = 8,
159                 .fifo_size              = 4,
160         },
161         [LS1043A] = {
162                 /* Has A-011218 DMA erratum */
163                 .trans_mode             = DSPI_XSPI_MODE,
164                 .max_clock_factor       = 8,
165                 .fifo_size              = 16,
166         },
167         [LS1046A] = {
168                 /* Has A-011218 DMA erratum */
169                 .trans_mode             = DSPI_XSPI_MODE,
170                 .max_clock_factor       = 8,
171                 .fifo_size              = 16,
172         },
173         [LS2080A] = {
174                 .trans_mode             = DSPI_XSPI_MODE,
175                 .max_clock_factor       = 8,
176                 .fifo_size              = 4,
177         },
178         [LS2085A] = {
179                 .trans_mode             = DSPI_XSPI_MODE,
180                 .max_clock_factor       = 8,
181                 .fifo_size              = 4,
182         },
183         [LX2160A] = {
184                 .trans_mode             = DSPI_XSPI_MODE,
185                 .max_clock_factor       = 8,
186                 .fifo_size              = 4,
187         },
188         [MCF5441X] = {
189                 .trans_mode             = DSPI_DMA_MODE,
190                 .max_clock_factor       = 8,
191                 .fifo_size              = 16,
192         },
193 };
194
195 struct fsl_dspi_dma {
196         u32                                     *tx_dma_buf;
197         struct dma_chan                         *chan_tx;
198         dma_addr_t                              tx_dma_phys;
199         struct completion                       cmd_tx_complete;
200         struct dma_async_tx_descriptor          *tx_desc;
201
202         u32                                     *rx_dma_buf;
203         struct dma_chan                         *chan_rx;
204         dma_addr_t                              rx_dma_phys;
205         struct completion                       cmd_rx_complete;
206         struct dma_async_tx_descriptor          *rx_desc;
207 };
208
209 struct fsl_dspi {
210         struct spi_controller                   *ctlr;
211         struct platform_device                  *pdev;
212
213         struct regmap                           *regmap;
214         struct regmap                           *regmap_pushr;
215         int                                     irq;
216         struct clk                              *clk;
217
218         struct spi_transfer                     *cur_transfer;
219         struct spi_message                      *cur_msg;
220         struct chip_data                        *cur_chip;
221         size_t                                  progress;
222         size_t                                  len;
223         const void                              *tx;
224         void                                    *rx;
225         u16                                     tx_cmd;
226         const struct fsl_dspi_devtype_data      *devtype_data;
227
228         struct completion                       xfer_done;
229
230         struct fsl_dspi_dma                     *dma;
231
232         int                                     oper_word_size;
233         int                                     oper_bits_per_word;
234
235         int                                     words_in_flight;
236
237         /*
238          * Offsets for CMD and TXDATA within SPI_PUSHR when accessed
239          * individually (in XSPI mode)
240          */
241         int                                     pushr_cmd;
242         int                                     pushr_tx;
243
244         void (*host_to_dev)(struct fsl_dspi *dspi, u32 *txdata);
245         void (*dev_to_host)(struct fsl_dspi *dspi, u32 rxdata);
246 };
247
248 static void dspi_native_host_to_dev(struct fsl_dspi *dspi, u32 *txdata)
249 {
250         switch (dspi->oper_word_size) {
251         case 1:
252                 *txdata = *(u8 *)dspi->tx;
253                 break;
254         case 2:
255                 *txdata = *(u16 *)dspi->tx;
256                 break;
257         case 4:
258                 *txdata = *(u32 *)dspi->tx;
259                 break;
260         }
261         dspi->tx += dspi->oper_word_size;
262 }
263
264 static void dspi_native_dev_to_host(struct fsl_dspi *dspi, u32 rxdata)
265 {
266         switch (dspi->oper_word_size) {
267         case 1:
268                 *(u8 *)dspi->rx = rxdata;
269                 break;
270         case 2:
271                 *(u16 *)dspi->rx = rxdata;
272                 break;
273         case 4:
274                 *(u32 *)dspi->rx = rxdata;
275                 break;
276         }
277         dspi->rx += dspi->oper_word_size;
278 }
279
280 static void dspi_8on32_host_to_dev(struct fsl_dspi *dspi, u32 *txdata)
281 {
282         *txdata = cpu_to_be32(*(u32 *)dspi->tx);
283         dspi->tx += sizeof(u32);
284 }
285
286 static void dspi_8on32_dev_to_host(struct fsl_dspi *dspi, u32 rxdata)
287 {
288         *(u32 *)dspi->rx = be32_to_cpu(rxdata);
289         dspi->rx += sizeof(u32);
290 }
291
292 static void dspi_8on16_host_to_dev(struct fsl_dspi *dspi, u32 *txdata)
293 {
294         *txdata = cpu_to_be16(*(u16 *)dspi->tx);
295         dspi->tx += sizeof(u16);
296 }
297
298 static void dspi_8on16_dev_to_host(struct fsl_dspi *dspi, u32 rxdata)
299 {
300         *(u16 *)dspi->rx = be16_to_cpu(rxdata);
301         dspi->rx += sizeof(u16);
302 }
303
304 static void dspi_16on32_host_to_dev(struct fsl_dspi *dspi, u32 *txdata)
305 {
306         u16 hi = *(u16 *)dspi->tx;
307         u16 lo = *(u16 *)(dspi->tx + 2);
308
309         *txdata = (u32)hi << 16 | lo;
310         dspi->tx += sizeof(u32);
311 }
312
313 static void dspi_16on32_dev_to_host(struct fsl_dspi *dspi, u32 rxdata)
314 {
315         u16 hi = rxdata & 0xffff;
316         u16 lo = rxdata >> 16;
317
318         *(u16 *)dspi->rx = lo;
319         *(u16 *)(dspi->rx + 2) = hi;
320         dspi->rx += sizeof(u32);
321 }
322
323 /*
324  * Pop one word from the TX buffer for pushing into the
325  * PUSHR register (TX FIFO)
326  */
327 static u32 dspi_pop_tx(struct fsl_dspi *dspi)
328 {
329         u32 txdata = 0;
330
331         if (dspi->tx)
332                 dspi->host_to_dev(dspi, &txdata);
333         dspi->len -= dspi->oper_word_size;
334         return txdata;
335 }
336
337 /* Prepare one TX FIFO entry (txdata plus cmd) */
338 static u32 dspi_pop_tx_pushr(struct fsl_dspi *dspi)
339 {
340         u16 cmd = dspi->tx_cmd, data = dspi_pop_tx(dspi);
341
342         if (spi_controller_is_slave(dspi->ctlr))
343                 return data;
344
345         if (dspi->len > 0)
346                 cmd |= SPI_PUSHR_CMD_CONT;
347         return cmd << 16 | data;
348 }
349
350 /* Push one word to the RX buffer from the POPR register (RX FIFO) */
351 static void dspi_push_rx(struct fsl_dspi *dspi, u32 rxdata)
352 {
353         if (!dspi->rx)
354                 return;
355         dspi->dev_to_host(dspi, rxdata);
356 }
357
358 static void dspi_tx_dma_callback(void *arg)
359 {
360         struct fsl_dspi *dspi = arg;
361         struct fsl_dspi_dma *dma = dspi->dma;
362
363         complete(&dma->cmd_tx_complete);
364 }
365
366 static void dspi_rx_dma_callback(void *arg)
367 {
368         struct fsl_dspi *dspi = arg;
369         struct fsl_dspi_dma *dma = dspi->dma;
370         int i;
371
372         if (dspi->rx) {
373                 for (i = 0; i < dspi->words_in_flight; i++)
374                         dspi_push_rx(dspi, dspi->dma->rx_dma_buf[i]);
375         }
376
377         complete(&dma->cmd_rx_complete);
378 }
379
380 static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi)
381 {
382         struct device *dev = &dspi->pdev->dev;
383         struct fsl_dspi_dma *dma = dspi->dma;
384         int time_left;
385         int i;
386
387         for (i = 0; i < dspi->words_in_flight; i++)
388                 dspi->dma->tx_dma_buf[i] = dspi_pop_tx_pushr(dspi);
389
390         dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx,
391                                         dma->tx_dma_phys,
392                                         dspi->words_in_flight *
393                                         DMA_SLAVE_BUSWIDTH_4_BYTES,
394                                         DMA_MEM_TO_DEV,
395                                         DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
396         if (!dma->tx_desc) {
397                 dev_err(dev, "Not able to get desc for DMA xfer\n");
398                 return -EIO;
399         }
400
401         dma->tx_desc->callback = dspi_tx_dma_callback;
402         dma->tx_desc->callback_param = dspi;
403         if (dma_submit_error(dmaengine_submit(dma->tx_desc))) {
404                 dev_err(dev, "DMA submit failed\n");
405                 return -EINVAL;
406         }
407
408         dma->rx_desc = dmaengine_prep_slave_single(dma->chan_rx,
409                                         dma->rx_dma_phys,
410                                         dspi->words_in_flight *
411                                         DMA_SLAVE_BUSWIDTH_4_BYTES,
412                                         DMA_DEV_TO_MEM,
413                                         DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
414         if (!dma->rx_desc) {
415                 dev_err(dev, "Not able to get desc for DMA xfer\n");
416                 return -EIO;
417         }
418
419         dma->rx_desc->callback = dspi_rx_dma_callback;
420         dma->rx_desc->callback_param = dspi;
421         if (dma_submit_error(dmaengine_submit(dma->rx_desc))) {
422                 dev_err(dev, "DMA submit failed\n");
423                 return -EINVAL;
424         }
425
426         reinit_completion(&dspi->dma->cmd_rx_complete);
427         reinit_completion(&dspi->dma->cmd_tx_complete);
428
429         dma_async_issue_pending(dma->chan_rx);
430         dma_async_issue_pending(dma->chan_tx);
431
432         if (spi_controller_is_slave(dspi->ctlr)) {
433                 wait_for_completion_interruptible(&dspi->dma->cmd_rx_complete);
434                 return 0;
435         }
436
437         time_left = wait_for_completion_timeout(&dspi->dma->cmd_tx_complete,
438                                                 DMA_COMPLETION_TIMEOUT);
439         if (time_left == 0) {
440                 dev_err(dev, "DMA tx timeout\n");
441                 dmaengine_terminate_all(dma->chan_tx);
442                 dmaengine_terminate_all(dma->chan_rx);
443                 return -ETIMEDOUT;
444         }
445
446         time_left = wait_for_completion_timeout(&dspi->dma->cmd_rx_complete,
447                                                 DMA_COMPLETION_TIMEOUT);
448         if (time_left == 0) {
449                 dev_err(dev, "DMA rx timeout\n");
450                 dmaengine_terminate_all(dma->chan_tx);
451                 dmaengine_terminate_all(dma->chan_rx);
452                 return -ETIMEDOUT;
453         }
454
455         return 0;
456 }
457
458 static void dspi_setup_accel(struct fsl_dspi *dspi);
459
460 static int dspi_dma_xfer(struct fsl_dspi *dspi)
461 {
462         struct spi_message *message = dspi->cur_msg;
463         struct device *dev = &dspi->pdev->dev;
464         int ret = 0;
465
466         /*
467          * dspi->len gets decremented by dspi_pop_tx_pushr in
468          * dspi_next_xfer_dma_submit
469          */
470         while (dspi->len) {
471                 /* Figure out operational bits-per-word for this chunk */
472                 dspi_setup_accel(dspi);
473
474                 dspi->words_in_flight = dspi->len / dspi->oper_word_size;
475                 if (dspi->words_in_flight > dspi->devtype_data->fifo_size)
476                         dspi->words_in_flight = dspi->devtype_data->fifo_size;
477
478                 message->actual_length += dspi->words_in_flight *
479                                           dspi->oper_word_size;
480
481                 ret = dspi_next_xfer_dma_submit(dspi);
482                 if (ret) {
483                         dev_err(dev, "DMA transfer failed\n");
484                         break;
485                 }
486         }
487
488         return ret;
489 }
490
491 static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
492 {
493         int dma_bufsize = dspi->devtype_data->fifo_size * 2;
494         struct device *dev = &dspi->pdev->dev;
495         struct dma_slave_config cfg;
496         struct fsl_dspi_dma *dma;
497         int ret;
498
499         dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
500         if (!dma)
501                 return -ENOMEM;
502
503         dma->chan_rx = dma_request_chan(dev, "rx");
504         if (IS_ERR(dma->chan_rx)) {
505                 dev_err(dev, "rx dma channel not available\n");
506                 ret = PTR_ERR(dma->chan_rx);
507                 return ret;
508         }
509
510         dma->chan_tx = dma_request_chan(dev, "tx");
511         if (IS_ERR(dma->chan_tx)) {
512                 dev_err(dev, "tx dma channel not available\n");
513                 ret = PTR_ERR(dma->chan_tx);
514                 goto err_tx_channel;
515         }
516
517         dma->tx_dma_buf = dma_alloc_coherent(dma->chan_tx->device->dev,
518                                              dma_bufsize, &dma->tx_dma_phys,
519                                              GFP_KERNEL);
520         if (!dma->tx_dma_buf) {
521                 ret = -ENOMEM;
522                 goto err_tx_dma_buf;
523         }
524
525         dma->rx_dma_buf = dma_alloc_coherent(dma->chan_rx->device->dev,
526                                              dma_bufsize, &dma->rx_dma_phys,
527                                              GFP_KERNEL);
528         if (!dma->rx_dma_buf) {
529                 ret = -ENOMEM;
530                 goto err_rx_dma_buf;
531         }
532
533         memset(&cfg, 0, sizeof(cfg));
534         cfg.src_addr = phy_addr + SPI_POPR;
535         cfg.dst_addr = phy_addr + SPI_PUSHR;
536         cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
537         cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
538         cfg.src_maxburst = 1;
539         cfg.dst_maxburst = 1;
540
541         cfg.direction = DMA_DEV_TO_MEM;
542         ret = dmaengine_slave_config(dma->chan_rx, &cfg);
543         if (ret) {
544                 dev_err(dev, "can't configure rx dma channel\n");
545                 ret = -EINVAL;
546                 goto err_slave_config;
547         }
548
549         cfg.direction = DMA_MEM_TO_DEV;
550         ret = dmaengine_slave_config(dma->chan_tx, &cfg);
551         if (ret) {
552                 dev_err(dev, "can't configure tx dma channel\n");
553                 ret = -EINVAL;
554                 goto err_slave_config;
555         }
556
557         dspi->dma = dma;
558         init_completion(&dma->cmd_tx_complete);
559         init_completion(&dma->cmd_rx_complete);
560
561         return 0;
562
563 err_slave_config:
564         dma_free_coherent(dma->chan_rx->device->dev,
565                           dma_bufsize, dma->rx_dma_buf, dma->rx_dma_phys);
566 err_rx_dma_buf:
567         dma_free_coherent(dma->chan_tx->device->dev,
568                           dma_bufsize, dma->tx_dma_buf, dma->tx_dma_phys);
569 err_tx_dma_buf:
570         dma_release_channel(dma->chan_tx);
571 err_tx_channel:
572         dma_release_channel(dma->chan_rx);
573
574         devm_kfree(dev, dma);
575         dspi->dma = NULL;
576
577         return ret;
578 }
579
580 static void dspi_release_dma(struct fsl_dspi *dspi)
581 {
582         int dma_bufsize = dspi->devtype_data->fifo_size * 2;
583         struct fsl_dspi_dma *dma = dspi->dma;
584
585         if (!dma)
586                 return;
587
588         if (dma->chan_tx) {
589                 dma_free_coherent(dma->chan_tx->device->dev, dma_bufsize,
590                                   dma->tx_dma_buf, dma->tx_dma_phys);
591                 dma_release_channel(dma->chan_tx);
592         }
593
594         if (dma->chan_rx) {
595                 dma_free_coherent(dma->chan_rx->device->dev, dma_bufsize,
596                                   dma->rx_dma_buf, dma->rx_dma_phys);
597                 dma_release_channel(dma->chan_rx);
598         }
599 }
600
601 static void hz_to_spi_baud(char *pbr, char *br, int speed_hz,
602                            unsigned long clkrate)
603 {
604         /* Valid baud rate pre-scaler values */
605         int pbr_tbl[4] = {2, 3, 5, 7};
606         int brs[16] = { 2,      4,      6,      8,
607                         16,     32,     64,     128,
608                         256,    512,    1024,   2048,
609                         4096,   8192,   16384,  32768 };
610         int scale_needed, scale, minscale = INT_MAX;
611         int i, j;
612
613         scale_needed = clkrate / speed_hz;
614         if (clkrate % speed_hz)
615                 scale_needed++;
616
617         for (i = 0; i < ARRAY_SIZE(brs); i++)
618                 for (j = 0; j < ARRAY_SIZE(pbr_tbl); j++) {
619                         scale = brs[i] * pbr_tbl[j];
620                         if (scale >= scale_needed) {
621                                 if (scale < minscale) {
622                                         minscale = scale;
623                                         *br = i;
624                                         *pbr = j;
625                                 }
626                                 break;
627                         }
628                 }
629
630         if (minscale == INT_MAX) {
631                 pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld, we use the max prescaler value.\n",
632                         speed_hz, clkrate);
633                 *pbr = ARRAY_SIZE(pbr_tbl) - 1;
634                 *br =  ARRAY_SIZE(brs) - 1;
635         }
636 }
637
638 static void ns_delay_scale(char *psc, char *sc, int delay_ns,
639                            unsigned long clkrate)
640 {
641         int scale_needed, scale, minscale = INT_MAX;
642         int pscale_tbl[4] = {1, 3, 5, 7};
643         u32 remainder;
644         int i, j;
645
646         scale_needed = div_u64_rem((u64)delay_ns * clkrate, NSEC_PER_SEC,
647                                    &remainder);
648         if (remainder)
649                 scale_needed++;
650
651         for (i = 0; i < ARRAY_SIZE(pscale_tbl); i++)
652                 for (j = 0; j <= SPI_CTAR_SCALE_BITS; j++) {
653                         scale = pscale_tbl[i] * (2 << j);
654                         if (scale >= scale_needed) {
655                                 if (scale < minscale) {
656                                         minscale = scale;
657                                         *psc = i;
658                                         *sc = j;
659                                 }
660                                 break;
661                         }
662                 }
663
664         if (minscale == INT_MAX) {
665                 pr_warn("Cannot find correct scale values for %dns delay at clkrate %ld, using max prescaler value",
666                         delay_ns, clkrate);
667                 *psc = ARRAY_SIZE(pscale_tbl) - 1;
668                 *sc = SPI_CTAR_SCALE_BITS;
669         }
670 }
671
672 static void dspi_pushr_cmd_write(struct fsl_dspi *dspi, u16 cmd)
673 {
674         /*
675          * The only time when the PCS doesn't need continuation after this word
676          * is when it's last. We need to look ahead, because we actually call
677          * dspi_pop_tx (the function that decrements dspi->len) _after_
678          * dspi_pushr_cmd_write with XSPI mode. As for how much in advance? One
679          * word is enough. If there's more to transmit than that,
680          * dspi_xspi_write will know to split the FIFO writes in 2, and
681          * generate a new PUSHR command with the final word that will have PCS
682          * deasserted (not continued) here.
683          */
684         if (dspi->len > dspi->oper_word_size)
685                 cmd |= SPI_PUSHR_CMD_CONT;
686         regmap_write(dspi->regmap_pushr, dspi->pushr_cmd, cmd);
687 }
688
689 static void dspi_pushr_txdata_write(struct fsl_dspi *dspi, u16 txdata)
690 {
691         regmap_write(dspi->regmap_pushr, dspi->pushr_tx, txdata);
692 }
693
694 static void dspi_xspi_fifo_write(struct fsl_dspi *dspi, int num_words)
695 {
696         int num_bytes = num_words * dspi->oper_word_size;
697         u16 tx_cmd = dspi->tx_cmd;
698
699         /*
700          * If the PCS needs to de-assert (i.e. we're at the end of the buffer
701          * and cs_change does not want the PCS to stay on), then we need a new
702          * PUSHR command, since this one (for the body of the buffer)
703          * necessarily has the CONT bit set.
704          * So send one word less during this go, to force a split and a command
705          * with a single word next time, when CONT will be unset.
706          */
707         if (!(dspi->tx_cmd & SPI_PUSHR_CMD_CONT) && num_bytes == dspi->len)
708                 tx_cmd |= SPI_PUSHR_CMD_EOQ;
709
710         /* Update CTARE */
711         regmap_write(dspi->regmap, SPI_CTARE(0),
712                      SPI_FRAME_EBITS(dspi->oper_bits_per_word) |
713                      SPI_CTARE_DTCP(num_words));
714
715         /*
716          * Write the CMD FIFO entry first, and then the two
717          * corresponding TX FIFO entries (or one...).
718          */
719         dspi_pushr_cmd_write(dspi, tx_cmd);
720
721         /* Fill TX FIFO with as many transfers as possible */
722         while (num_words--) {
723                 u32 data = dspi_pop_tx(dspi);
724
725                 dspi_pushr_txdata_write(dspi, data & 0xFFFF);
726                 if (dspi->oper_bits_per_word > 16)
727                         dspi_pushr_txdata_write(dspi, data >> 16);
728         }
729 }
730
731 static u32 dspi_popr_read(struct fsl_dspi *dspi)
732 {
733         u32 rxdata = 0;
734
735         regmap_read(dspi->regmap, SPI_POPR, &rxdata);
736         return rxdata;
737 }
738
739 static void dspi_fifo_read(struct fsl_dspi *dspi)
740 {
741         int num_fifo_entries = dspi->words_in_flight;
742
743         /* Read one FIFO entry and push to rx buffer */
744         while (num_fifo_entries--)
745                 dspi_push_rx(dspi, dspi_popr_read(dspi));
746 }
747
748 static void dspi_setup_accel(struct fsl_dspi *dspi)
749 {
750         struct spi_transfer *xfer = dspi->cur_transfer;
751         bool odd = !!(dspi->len & 1);
752
753         /* No accel for frames not multiple of 8 bits at the moment */
754         if (xfer->bits_per_word % 8)
755                 goto no_accel;
756
757         if (!odd && dspi->len <= dspi->devtype_data->fifo_size * 2) {
758                 dspi->oper_bits_per_word = 16;
759         } else if (odd && dspi->len <= dspi->devtype_data->fifo_size) {
760                 dspi->oper_bits_per_word = 8;
761         } else {
762                 /* Start off with maximum supported by hardware */
763                 if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE)
764                         dspi->oper_bits_per_word = 32;
765                 else
766                         dspi->oper_bits_per_word = 16;
767
768                 /*
769                  * And go down only if the buffer can't be sent with
770                  * words this big
771                  */
772                 do {
773                         if (dspi->len >= DIV_ROUND_UP(dspi->oper_bits_per_word, 8))
774                                 break;
775
776                         dspi->oper_bits_per_word /= 2;
777                 } while (dspi->oper_bits_per_word > 8);
778         }
779
780         if (xfer->bits_per_word == 8 && dspi->oper_bits_per_word == 32) {
781                 dspi->dev_to_host = dspi_8on32_dev_to_host;
782                 dspi->host_to_dev = dspi_8on32_host_to_dev;
783         } else if (xfer->bits_per_word == 8 && dspi->oper_bits_per_word == 16) {
784                 dspi->dev_to_host = dspi_8on16_dev_to_host;
785                 dspi->host_to_dev = dspi_8on16_host_to_dev;
786         } else if (xfer->bits_per_word == 16 && dspi->oper_bits_per_word == 32) {
787                 dspi->dev_to_host = dspi_16on32_dev_to_host;
788                 dspi->host_to_dev = dspi_16on32_host_to_dev;
789         } else {
790 no_accel:
791                 dspi->dev_to_host = dspi_native_dev_to_host;
792                 dspi->host_to_dev = dspi_native_host_to_dev;
793                 dspi->oper_bits_per_word = xfer->bits_per_word;
794         }
795
796         dspi->oper_word_size = DIV_ROUND_UP(dspi->oper_bits_per_word, 8);
797
798         /*
799          * Update CTAR here (code is common for XSPI and DMA modes).
800          * We will update CTARE in the portion specific to XSPI, when we
801          * also know the preload value (DTCP).
802          */
803         regmap_write(dspi->regmap, SPI_CTAR(0),
804                      dspi->cur_chip->ctar_val |
805                      SPI_FRAME_BITS(dspi->oper_bits_per_word));
806 }
807
808 static void dspi_fifo_write(struct fsl_dspi *dspi)
809 {
810         int num_fifo_entries = dspi->devtype_data->fifo_size;
811         struct spi_transfer *xfer = dspi->cur_transfer;
812         struct spi_message *msg = dspi->cur_msg;
813         int num_words, num_bytes;
814
815         dspi_setup_accel(dspi);
816
817         /* In XSPI mode each 32-bit word occupies 2 TX FIFO entries */
818         if (dspi->oper_word_size == 4)
819                 num_fifo_entries /= 2;
820
821         /*
822          * Integer division intentionally trims off odd (or non-multiple of 4)
823          * numbers of bytes at the end of the buffer, which will be sent next
824          * time using a smaller oper_word_size.
825          */
826         num_words = dspi->len / dspi->oper_word_size;
827         if (num_words > num_fifo_entries)
828                 num_words = num_fifo_entries;
829
830         /* Update total number of bytes that were transferred */
831         num_bytes = num_words * dspi->oper_word_size;
832         msg->actual_length += num_bytes;
833         dspi->progress += num_bytes / DIV_ROUND_UP(xfer->bits_per_word, 8);
834
835         /*
836          * Update shared variable for use in the next interrupt (both in
837          * dspi_fifo_read and in dspi_fifo_write).
838          */
839         dspi->words_in_flight = num_words;
840
841         spi_take_timestamp_pre(dspi->ctlr, xfer, dspi->progress, !dspi->irq);
842
843         dspi_xspi_fifo_write(dspi, num_words);
844         /*
845          * Everything after this point is in a potential race with the next
846          * interrupt, so we must never use dspi->words_in_flight again since it
847          * might already be modified by the next dspi_fifo_write.
848          */
849
850         spi_take_timestamp_post(dspi->ctlr, dspi->cur_transfer,
851                                 dspi->progress, !dspi->irq);
852 }
853
854 static int dspi_rxtx(struct fsl_dspi *dspi)
855 {
856         dspi_fifo_read(dspi);
857
858         if (!dspi->len)
859                 /* Success! */
860                 return 0;
861
862         dspi_fifo_write(dspi);
863
864         return -EINPROGRESS;
865 }
866
867 static int dspi_poll(struct fsl_dspi *dspi)
868 {
869         int tries = 1000;
870         u32 spi_sr;
871
872         do {
873                 regmap_read(dspi->regmap, SPI_SR, &spi_sr);
874                 regmap_write(dspi->regmap, SPI_SR, spi_sr);
875
876                 if (spi_sr & SPI_SR_CMDTCF)
877                         break;
878         } while (--tries);
879
880         if (!tries)
881                 return -ETIMEDOUT;
882
883         return dspi_rxtx(dspi);
884 }
885
886 static irqreturn_t dspi_interrupt(int irq, void *dev_id)
887 {
888         struct fsl_dspi *dspi = (struct fsl_dspi *)dev_id;
889         u32 spi_sr;
890
891         regmap_read(dspi->regmap, SPI_SR, &spi_sr);
892         regmap_write(dspi->regmap, SPI_SR, spi_sr);
893
894         if (!(spi_sr & SPI_SR_CMDTCF))
895                 return IRQ_NONE;
896
897         if (dspi_rxtx(dspi) == 0)
898                 complete(&dspi->xfer_done);
899
900         return IRQ_HANDLED;
901 }
902
903 static int dspi_transfer_one_message(struct spi_controller *ctlr,
904                                      struct spi_message *message)
905 {
906         struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
907         struct spi_device *spi = message->spi;
908         struct spi_transfer *transfer;
909         int status = 0;
910
911         message->actual_length = 0;
912
913         list_for_each_entry(transfer, &message->transfers, transfer_list) {
914                 dspi->cur_transfer = transfer;
915                 dspi->cur_msg = message;
916                 dspi->cur_chip = spi_get_ctldata(spi);
917                 /* Prepare command word for CMD FIFO */
918                 dspi->tx_cmd = SPI_PUSHR_CMD_CTAS(0) |
919                                SPI_PUSHR_CMD_PCS(spi->chip_select);
920                 if (list_is_last(&dspi->cur_transfer->transfer_list,
921                                  &dspi->cur_msg->transfers)) {
922                         /* Leave PCS activated after last transfer when
923                          * cs_change is set.
924                          */
925                         if (transfer->cs_change)
926                                 dspi->tx_cmd |= SPI_PUSHR_CMD_CONT;
927                 } else {
928                         /* Keep PCS active between transfers in same message
929                          * when cs_change is not set, and de-activate PCS
930                          * between transfers in the same message when
931                          * cs_change is set.
932                          */
933                         if (!transfer->cs_change)
934                                 dspi->tx_cmd |= SPI_PUSHR_CMD_CONT;
935                 }
936
937                 dspi->tx = transfer->tx_buf;
938                 dspi->rx = transfer->rx_buf;
939                 dspi->len = transfer->len;
940                 dspi->progress = 0;
941
942                 regmap_update_bits(dspi->regmap, SPI_MCR,
943                                    SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF,
944                                    SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF);
945
946                 spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer,
947                                        dspi->progress, !dspi->irq);
948
949                 if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
950                         status = dspi_dma_xfer(dspi);
951                 } else {
952                         dspi_fifo_write(dspi);
953
954                         if (dspi->irq) {
955                                 wait_for_completion(&dspi->xfer_done);
956                                 reinit_completion(&dspi->xfer_done);
957                         } else {
958                                 do {
959                                         status = dspi_poll(dspi);
960                                 } while (status == -EINPROGRESS);
961                         }
962                 }
963                 if (status)
964                         break;
965
966                 spi_transfer_delay_exec(transfer);
967         }
968
969         message->status = status;
970         spi_finalize_current_message(ctlr);
971
972         return status;
973 }
974
975 static int dspi_setup(struct spi_device *spi)
976 {
977         struct fsl_dspi *dspi = spi_controller_get_devdata(spi->controller);
978         unsigned char br = 0, pbr = 0, pcssck = 0, cssck = 0;
979         u32 cs_sck_delay = 0, sck_cs_delay = 0;
980         struct fsl_dspi_platform_data *pdata;
981         unsigned char pasc = 0, asc = 0;
982         struct chip_data *chip;
983         unsigned long clkrate;
984
985         /* Only alloc on first setup */
986         chip = spi_get_ctldata(spi);
987         if (chip == NULL) {
988                 chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
989                 if (!chip)
990                         return -ENOMEM;
991         }
992
993         pdata = dev_get_platdata(&dspi->pdev->dev);
994
995         if (!pdata) {
996                 of_property_read_u32(spi->dev.of_node, "fsl,spi-cs-sck-delay",
997                                      &cs_sck_delay);
998
999                 of_property_read_u32(spi->dev.of_node, "fsl,spi-sck-cs-delay",
1000                                      &sck_cs_delay);
1001         } else {
1002                 cs_sck_delay = pdata->cs_sck_delay;
1003                 sck_cs_delay = pdata->sck_cs_delay;
1004         }
1005
1006         clkrate = clk_get_rate(dspi->clk);
1007         hz_to_spi_baud(&pbr, &br, spi->max_speed_hz, clkrate);
1008
1009         /* Set PCS to SCK delay scale values */
1010         ns_delay_scale(&pcssck, &cssck, cs_sck_delay, clkrate);
1011
1012         /* Set After SCK delay scale values */
1013         ns_delay_scale(&pasc, &asc, sck_cs_delay, clkrate);
1014
1015         chip->ctar_val = 0;
1016         if (spi->mode & SPI_CPOL)
1017                 chip->ctar_val |= SPI_CTAR_CPOL;
1018         if (spi->mode & SPI_CPHA)
1019                 chip->ctar_val |= SPI_CTAR_CPHA;
1020
1021         if (!spi_controller_is_slave(dspi->ctlr)) {
1022                 chip->ctar_val |= SPI_CTAR_PCSSCK(pcssck) |
1023                                   SPI_CTAR_CSSCK(cssck) |
1024                                   SPI_CTAR_PASC(pasc) |
1025                                   SPI_CTAR_ASC(asc) |
1026                                   SPI_CTAR_PBR(pbr) |
1027                                   SPI_CTAR_BR(br);
1028
1029                 if (spi->mode & SPI_LSB_FIRST)
1030                         chip->ctar_val |= SPI_CTAR_LSBFE;
1031         }
1032
1033         spi_set_ctldata(spi, chip);
1034
1035         return 0;
1036 }
1037
1038 static void dspi_cleanup(struct spi_device *spi)
1039 {
1040         struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
1041
1042         dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n",
1043                 spi->controller->bus_num, spi->chip_select);
1044
1045         kfree(chip);
1046 }
1047
1048 static const struct of_device_id fsl_dspi_dt_ids[] = {
1049         {
1050                 .compatible = "fsl,vf610-dspi",
1051                 .data = &devtype_data[VF610],
1052         }, {
1053                 .compatible = "fsl,ls1021a-v1.0-dspi",
1054                 .data = &devtype_data[LS1021A],
1055         }, {
1056                 .compatible = "fsl,ls1012a-dspi",
1057                 .data = &devtype_data[LS1012A],
1058         }, {
1059                 .compatible = "fsl,ls1028a-dspi",
1060                 .data = &devtype_data[LS1028A],
1061         }, {
1062                 .compatible = "fsl,ls1043a-dspi",
1063                 .data = &devtype_data[LS1043A],
1064         }, {
1065                 .compatible = "fsl,ls1046a-dspi",
1066                 .data = &devtype_data[LS1046A],
1067         }, {
1068                 .compatible = "fsl,ls2080a-dspi",
1069                 .data = &devtype_data[LS2080A],
1070         }, {
1071                 .compatible = "fsl,ls2085a-dspi",
1072                 .data = &devtype_data[LS2085A],
1073         }, {
1074                 .compatible = "fsl,lx2160a-dspi",
1075                 .data = &devtype_data[LX2160A],
1076         },
1077         { /* sentinel */ }
1078 };
1079 MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids);
1080
1081 #ifdef CONFIG_PM_SLEEP
1082 static int dspi_suspend(struct device *dev)
1083 {
1084         struct fsl_dspi *dspi = dev_get_drvdata(dev);
1085
1086         if (dspi->irq)
1087                 disable_irq(dspi->irq);
1088         spi_controller_suspend(dspi->ctlr);
1089         clk_disable_unprepare(dspi->clk);
1090
1091         pinctrl_pm_select_sleep_state(dev);
1092
1093         return 0;
1094 }
1095
1096 static int dspi_resume(struct device *dev)
1097 {
1098         struct fsl_dspi *dspi = dev_get_drvdata(dev);
1099         int ret;
1100
1101         pinctrl_pm_select_default_state(dev);
1102
1103         ret = clk_prepare_enable(dspi->clk);
1104         if (ret)
1105                 return ret;
1106         spi_controller_resume(dspi->ctlr);
1107         if (dspi->irq)
1108                 enable_irq(dspi->irq);
1109
1110         return 0;
1111 }
1112 #endif /* CONFIG_PM_SLEEP */
1113
1114 static SIMPLE_DEV_PM_OPS(dspi_pm, dspi_suspend, dspi_resume);
1115
1116 static const struct regmap_range dspi_volatile_ranges[] = {
1117         regmap_reg_range(SPI_MCR, SPI_TCR),
1118         regmap_reg_range(SPI_SR, SPI_SR),
1119         regmap_reg_range(SPI_PUSHR, SPI_RXFR3),
1120 };
1121
1122 static const struct regmap_access_table dspi_volatile_table = {
1123         .yes_ranges     = dspi_volatile_ranges,
1124         .n_yes_ranges   = ARRAY_SIZE(dspi_volatile_ranges),
1125 };
1126
1127 static const struct regmap_config dspi_regmap_config = {
1128         .reg_bits       = 32,
1129         .val_bits       = 32,
1130         .reg_stride     = 4,
1131         .max_register   = 0x88,
1132         .volatile_table = &dspi_volatile_table,
1133 };
1134
1135 static const struct regmap_range dspi_xspi_volatile_ranges[] = {
1136         regmap_reg_range(SPI_MCR, SPI_TCR),
1137         regmap_reg_range(SPI_SR, SPI_SR),
1138         regmap_reg_range(SPI_PUSHR, SPI_RXFR3),
1139         regmap_reg_range(SPI_SREX, SPI_SREX),
1140 };
1141
1142 static const struct regmap_access_table dspi_xspi_volatile_table = {
1143         .yes_ranges     = dspi_xspi_volatile_ranges,
1144         .n_yes_ranges   = ARRAY_SIZE(dspi_xspi_volatile_ranges),
1145 };
1146
1147 static const struct regmap_config dspi_xspi_regmap_config[] = {
1148         {
1149                 .reg_bits       = 32,
1150                 .val_bits       = 32,
1151                 .reg_stride     = 4,
1152                 .max_register   = 0x13c,
1153                 .volatile_table = &dspi_xspi_volatile_table,
1154         },
1155         {
1156                 .name           = "pushr",
1157                 .reg_bits       = 16,
1158                 .val_bits       = 16,
1159                 .reg_stride     = 2,
1160                 .max_register   = 0x2,
1161         },
1162 };
1163
1164 static int dspi_init(struct fsl_dspi *dspi)
1165 {
1166         unsigned int mcr;
1167
1168         /* Set idle states for all chip select signals to high */
1169         mcr = SPI_MCR_PCSIS(GENMASK(dspi->ctlr->max_native_cs - 1, 0));
1170
1171         if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE)
1172                 mcr |= SPI_MCR_XSPI;
1173         if (!spi_controller_is_slave(dspi->ctlr))
1174                 mcr |= SPI_MCR_MASTER;
1175
1176         regmap_write(dspi->regmap, SPI_MCR, mcr);
1177         regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR);
1178
1179         switch (dspi->devtype_data->trans_mode) {
1180         case DSPI_XSPI_MODE:
1181                 regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_CMDTCFE);
1182                 break;
1183         case DSPI_DMA_MODE:
1184                 regmap_write(dspi->regmap, SPI_RSER,
1185                              SPI_RSER_TFFFE | SPI_RSER_TFFFD |
1186                              SPI_RSER_RFDFE | SPI_RSER_RFDFD);
1187                 break;
1188         default:
1189                 dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
1190                         dspi->devtype_data->trans_mode);
1191                 return -EINVAL;
1192         }
1193
1194         return 0;
1195 }
1196
1197 static int dspi_slave_abort(struct spi_master *master)
1198 {
1199         struct fsl_dspi *dspi = spi_master_get_devdata(master);
1200
1201         /*
1202          * Terminate all pending DMA transactions for the SPI working
1203          * in SLAVE mode.
1204          */
1205         if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
1206                 dmaengine_terminate_sync(dspi->dma->chan_rx);
1207                 dmaengine_terminate_sync(dspi->dma->chan_tx);
1208         }
1209
1210         /* Clear the internal DSPI RX and TX FIFO buffers */
1211         regmap_update_bits(dspi->regmap, SPI_MCR,
1212                            SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF,
1213                            SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF);
1214
1215         return 0;
1216 }
1217
1218 static int dspi_probe(struct platform_device *pdev)
1219 {
1220         struct device_node *np = pdev->dev.of_node;
1221         const struct regmap_config *regmap_config;
1222         struct fsl_dspi_platform_data *pdata;
1223         struct spi_controller *ctlr;
1224         int ret, cs_num, bus_num = -1;
1225         struct fsl_dspi *dspi;
1226         struct resource *res;
1227         void __iomem *base;
1228         bool big_endian;
1229
1230         dspi = devm_kzalloc(&pdev->dev, sizeof(*dspi), GFP_KERNEL);
1231         if (!dspi)
1232                 return -ENOMEM;
1233
1234         ctlr = spi_alloc_master(&pdev->dev, 0);
1235         if (!ctlr)
1236                 return -ENOMEM;
1237
1238         spi_controller_set_devdata(ctlr, dspi);
1239         platform_set_drvdata(pdev, dspi);
1240
1241         dspi->pdev = pdev;
1242         dspi->ctlr = ctlr;
1243
1244         ctlr->setup = dspi_setup;
1245         ctlr->transfer_one_message = dspi_transfer_one_message;
1246         ctlr->dev.of_node = pdev->dev.of_node;
1247
1248         ctlr->cleanup = dspi_cleanup;
1249         ctlr->slave_abort = dspi_slave_abort;
1250         ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
1251
1252         pdata = dev_get_platdata(&pdev->dev);
1253         if (pdata) {
1254                 ctlr->num_chipselect = ctlr->max_native_cs = pdata->cs_num;
1255                 ctlr->bus_num = pdata->bus_num;
1256
1257                 /* Only Coldfire uses platform data */
1258                 dspi->devtype_data = &devtype_data[MCF5441X];
1259                 big_endian = true;
1260         } else {
1261
1262                 ret = of_property_read_u32(np, "spi-num-chipselects", &cs_num);
1263                 if (ret < 0) {
1264                         dev_err(&pdev->dev, "can't get spi-num-chipselects\n");
1265                         goto out_ctlr_put;
1266                 }
1267                 ctlr->num_chipselect = ctlr->max_native_cs = cs_num;
1268
1269                 of_property_read_u32(np, "bus-num", &bus_num);
1270                 ctlr->bus_num = bus_num;
1271
1272                 if (of_property_read_bool(np, "spi-slave"))
1273                         ctlr->slave = true;
1274
1275                 dspi->devtype_data = of_device_get_match_data(&pdev->dev);
1276                 if (!dspi->devtype_data) {
1277                         dev_err(&pdev->dev, "can't get devtype_data\n");
1278                         ret = -EFAULT;
1279                         goto out_ctlr_put;
1280                 }
1281
1282                 big_endian = of_device_is_big_endian(np);
1283         }
1284         if (big_endian) {
1285                 dspi->pushr_cmd = 0;
1286                 dspi->pushr_tx = 2;
1287         } else {
1288                 dspi->pushr_cmd = 2;
1289                 dspi->pushr_tx = 0;
1290         }
1291
1292         if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE)
1293                 ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
1294         else
1295                 ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
1296
1297         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1298         base = devm_ioremap_resource(&pdev->dev, res);
1299         if (IS_ERR(base)) {
1300                 ret = PTR_ERR(base);
1301                 goto out_ctlr_put;
1302         }
1303
1304         if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE)
1305                 regmap_config = &dspi_xspi_regmap_config[0];
1306         else
1307                 regmap_config = &dspi_regmap_config;
1308         dspi->regmap = devm_regmap_init_mmio(&pdev->dev, base, regmap_config);
1309         if (IS_ERR(dspi->regmap)) {
1310                 dev_err(&pdev->dev, "failed to init regmap: %ld\n",
1311                                 PTR_ERR(dspi->regmap));
1312                 ret = PTR_ERR(dspi->regmap);
1313                 goto out_ctlr_put;
1314         }
1315
1316         if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) {
1317                 dspi->regmap_pushr = devm_regmap_init_mmio(
1318                         &pdev->dev, base + SPI_PUSHR,
1319                         &dspi_xspi_regmap_config[1]);
1320                 if (IS_ERR(dspi->regmap_pushr)) {
1321                         dev_err(&pdev->dev,
1322                                 "failed to init pushr regmap: %ld\n",
1323                                 PTR_ERR(dspi->regmap_pushr));
1324                         ret = PTR_ERR(dspi->regmap_pushr);
1325                         goto out_ctlr_put;
1326                 }
1327         }
1328
1329         dspi->clk = devm_clk_get(&pdev->dev, "dspi");
1330         if (IS_ERR(dspi->clk)) {
1331                 ret = PTR_ERR(dspi->clk);
1332                 dev_err(&pdev->dev, "unable to get clock\n");
1333                 goto out_ctlr_put;
1334         }
1335         ret = clk_prepare_enable(dspi->clk);
1336         if (ret)
1337                 goto out_ctlr_put;
1338
1339         ret = dspi_init(dspi);
1340         if (ret)
1341                 goto out_clk_put;
1342
1343         dspi->irq = platform_get_irq(pdev, 0);
1344         if (dspi->irq <= 0) {
1345                 dev_info(&pdev->dev,
1346                          "can't get platform irq, using poll mode\n");
1347                 dspi->irq = 0;
1348                 goto poll_mode;
1349         }
1350
1351         init_completion(&dspi->xfer_done);
1352
1353         ret = request_threaded_irq(dspi->irq, dspi_interrupt, NULL,
1354                                    IRQF_SHARED, pdev->name, dspi);
1355         if (ret < 0) {
1356                 dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
1357                 goto out_clk_put;
1358         }
1359
1360 poll_mode:
1361
1362         if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
1363                 ret = dspi_request_dma(dspi, res->start);
1364                 if (ret < 0) {
1365                         dev_err(&pdev->dev, "can't get dma channels\n");
1366                         goto out_free_irq;
1367                 }
1368         }
1369
1370         ctlr->max_speed_hz =
1371                 clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor;
1372
1373         if (dspi->devtype_data->trans_mode != DSPI_DMA_MODE)
1374                 ctlr->ptp_sts_supported = true;
1375
1376         ret = spi_register_controller(ctlr);
1377         if (ret != 0) {
1378                 dev_err(&pdev->dev, "Problem registering DSPI ctlr\n");
1379                 goto out_release_dma;
1380         }
1381
1382         return ret;
1383
1384 out_release_dma:
1385         dspi_release_dma(dspi);
1386 out_free_irq:
1387         if (dspi->irq)
1388                 free_irq(dspi->irq, dspi);
1389 out_clk_put:
1390         clk_disable_unprepare(dspi->clk);
1391 out_ctlr_put:
1392         spi_controller_put(ctlr);
1393
1394         return ret;
1395 }
1396
1397 static int dspi_remove(struct platform_device *pdev)
1398 {
1399         struct fsl_dspi *dspi = platform_get_drvdata(pdev);
1400
1401         /* Disconnect from the SPI framework */
1402         spi_unregister_controller(dspi->ctlr);
1403
1404         /* Disable RX and TX */
1405         regmap_update_bits(dspi->regmap, SPI_MCR,
1406                            SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF,
1407                            SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF);
1408
1409         /* Stop Running */
1410         regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_HALT, SPI_MCR_HALT);
1411
1412         dspi_release_dma(dspi);
1413         if (dspi->irq)
1414                 free_irq(dspi->irq, dspi);
1415         clk_disable_unprepare(dspi->clk);
1416
1417         return 0;
1418 }
1419
1420 static void dspi_shutdown(struct platform_device *pdev)
1421 {
1422         dspi_remove(pdev);
1423 }
1424
1425 static struct platform_driver fsl_dspi_driver = {
1426         .driver.name            = DRIVER_NAME,
1427         .driver.of_match_table  = fsl_dspi_dt_ids,
1428         .driver.owner           = THIS_MODULE,
1429         .driver.pm              = &dspi_pm,
1430         .probe                  = dspi_probe,
1431         .remove                 = dspi_remove,
1432         .shutdown               = dspi_shutdown,
1433 };
1434 module_platform_driver(fsl_dspi_driver);
1435
1436 MODULE_DESCRIPTION("Freescale DSPI Controller Driver");
1437 MODULE_LICENSE("GPL");
1438 MODULE_ALIAS("platform:" DRIVER_NAME);