drivers/regulator/mpq7920.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // mpq7920.c  - regulator driver for mps mpq7920
   4 //
   5 // Copyright 2019 Monolithic Power Systems, Inc
   6 //
   7 // Author: Saravanan Sekar <sravanhome@gmail.com>
   8
   9 #include <linux/kernel.h>
  10 #include <linux/module.h>
  11 #include <linux/init.h>
  12 #include <linux/err.h>
  13 #include <linux/of.h>
  14 #include <linux/of_device.h>
  15 #include <linux/platform_device.h>
  16 #include <linux/regulator/driver.h>
  17 #include <linux/regulator/of_regulator.h>
  18 #include <linux/i2c.h>
  19 #include <linux/regmap.h>
  20 #include "mpq7920.h"
  21
  22 #define MPQ7920_BUCK_VOLT_RANGE \
  23         ((MPQ7920_VOLT_MAX - MPQ7920_BUCK_VOLT_MIN)/MPQ7920_VOLT_STEP + 1)
  24 #define MPQ7920_LDO_VOLT_RANGE \
  25         ((MPQ7920_VOLT_MAX - MPQ7920_LDO_VOLT_MIN)/MPQ7920_VOLT_STEP + 1)
  26
  27 #define MPQ7920BUCK(_name, _id, _ilim)                                  \
  28         [MPQ7920_BUCK ## _id] = {                                       \
  29                 .id = MPQ7920_BUCK ## _id,                              \
  30                 .name = _name,                                          \
  31                 .of_match = _name,                                      \
  32                 .regulators_node = "regulators",                        \
  33                 .of_parse_cb = mpq7920_parse_cb,                        \
  34                 .ops = &mpq7920_buck_ops,                               \
  35                 .min_uV = MPQ7920_BUCK_VOLT_MIN,                        \
  36                 .uV_step = MPQ7920_VOLT_STEP,                           \
  37                 .n_voltages = MPQ7920_BUCK_VOLT_RANGE,                  \
  38                 .curr_table = _ilim,                                    \
  39                 .n_current_limits = ARRAY_SIZE(_ilim),                  \
  40                 .csel_reg = MPQ7920_BUCK ##_id## _REG_C,                \
  41                 .csel_mask = MPQ7920_MASK_BUCK_ILIM,                    \
  42                 .enable_reg = MPQ7920_REG_REGULATOR_EN,                 \
  43                 .enable_mask = BIT(MPQ7920_REGULATOR_EN_OFFSET -        \
  44                                          MPQ7920_BUCK ## _id),          \
  45                 .vsel_reg = MPQ7920_BUCK ##_id## _REG_A,                \
  46                 .vsel_mask = MPQ7920_MASK_VREF,                         \
  47                 .active_discharge_on    = MPQ7920_DISCHARGE_ON,         \
  48                 .active_discharge_reg   = MPQ7920_BUCK ##_id## _REG_B,  \
  49                 .active_discharge_mask  = MPQ7920_MASK_DISCHARGE,       \
  50                 .soft_start_reg         = MPQ7920_BUCK ##_id## _REG_C,  \
  51                 .soft_start_mask        = MPQ7920_MASK_SOFTSTART,       \
  52                 .owner                  = THIS_MODULE,                  \
  53         }
  54
  55 #define MPQ7920LDO(_name, _id, _ops, _ilim, _ilim_sz, _creg, _cmask)    \
  56         [MPQ7920_LDO ## _id] = {                                        \
  57                 .id = MPQ7920_LDO ## _id,                               \
  58                 .name = _name,                                          \
  59                 .of_match = _name,                                      \
  60                 .regulators_node = "regulators",                        \
  61                 .ops = _ops,                                            \
  62                 .min_uV = MPQ7920_LDO_VOLT_MIN,                         \
  63                 .uV_step = MPQ7920_VOLT_STEP,                           \
  64                 .n_voltages = MPQ7920_LDO_VOLT_RANGE,                   \
  65                 .vsel_reg = MPQ7920_LDO ##_id## _REG_A,                 \
  66                 .vsel_mask = MPQ7920_MASK_VREF,                         \
  67                 .curr_table = _ilim,                                    \
  68                 .n_current_limits = _ilim_sz,                           \
  69                 .csel_reg = _creg,                                      \
  70                 .csel_mask = _cmask,                                    \
  71                 .enable_reg = (_id == 1) ? 0 : MPQ7920_REG_REGULATOR_EN,\
  72                 .enable_mask = BIT(MPQ7920_REGULATOR_EN_OFFSET -        \
  73                                         MPQ7920_LDO ##_id + 1),         \
  74                 .active_discharge_on    = MPQ7920_DISCHARGE_ON,         \
  75                 .active_discharge_mask  = MPQ7920_MASK_DISCHARGE,       \
  76                 .active_discharge_reg   = MPQ7920_LDO ##_id## _REG_B,   \
  77                 .type                   = REGULATOR_VOLTAGE,            \
  78                 .owner                  = THIS_MODULE,                  \
  79         }
  80
  81 enum mpq7920_regulators {
  82         MPQ7920_BUCK1,
  83         MPQ7920_BUCK2,
  84         MPQ7920_BUCK3,
  85         MPQ7920_BUCK4,
  86         MPQ7920_LDO1, /* LDORTC */
  87         MPQ7920_LDO2,
  88         MPQ7920_LDO3,
  89         MPQ7920_LDO4,
  90         MPQ7920_LDO5,
  91         MPQ7920_MAX_REGULATORS,
  92 };
  93
  94 struct mpq7920_regulator_info {
  95         struct regmap *regmap;
  96         struct regulator_desc *rdesc;
  97 };
  98
  99 static const struct regmap_config mpq7920_regmap_config = {
 100         .reg_bits = 8,
 101         .val_bits = 8,
 102         .max_register = 0x25,
 103 };
 104
 105 /* Current limits array (in uA)
 106  * ILIM1 & ILIM3
 107  */
 108 static const unsigned int mpq7920_I_limits1[] = {
 109         4600000, 6600000, 7600000, 9300000
 110 };
 111
 112 /* ILIM2 & ILIM4 */
 113 static const unsigned int mpq7920_I_limits2[] = {
 114         2700000, 3900000, 5100000, 6100000
 115 };
 116
 117 /* LDO4 & LDO5 */
 118 static const unsigned int mpq7920_I_limits3[] = {
 119         300000, 700000
 120 };
 121
 122 static int mpq7920_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay);
 123 static int mpq7920_parse_cb(struct device_node *np,
 124                                 const struct regulator_desc *rdesc,
 125                                 struct regulator_config *config);
 126
 127 /* RTCLDO not controllable, always ON */
 128 static const struct regulator_ops mpq7920_ldortc_ops = {
 129         .list_voltage           = regulator_list_voltage_linear,
 130         .map_voltage            = regulator_map_voltage_linear,
 131         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 132         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 133 };
 134
 135 static const struct regulator_ops mpq7920_ldo_wo_current_ops = {
 136         .enable                 = regulator_enable_regmap,
 137         .disable                = regulator_disable_regmap,
 138         .is_enabled             = regulator_is_enabled_regmap,
 139         .list_voltage           = regulator_list_voltage_linear,
 140         .map_voltage            = regulator_map_voltage_linear,
 141         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 142         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 143         .set_active_discharge   = regulator_set_active_discharge_regmap,
 144 };
 145
 146 static const struct regulator_ops mpq7920_ldo_ops = {
 147         .enable                 = regulator_enable_regmap,
 148         .disable                = regulator_disable_regmap,
 149         .is_enabled             = regulator_is_enabled_regmap,
 150         .list_voltage           = regulator_list_voltage_linear,
 151         .map_voltage            = regulator_map_voltage_linear,
 152         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 153         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 154         .set_active_discharge   = regulator_set_active_discharge_regmap,
 155         .get_current_limit      = regulator_get_current_limit_regmap,
 156         .set_current_limit      = regulator_set_current_limit_regmap,
 157 };
 158
 159 static const struct regulator_ops mpq7920_buck_ops = {
 160         .enable                 = regulator_enable_regmap,
 161         .disable                = regulator_disable_regmap,
 162         .is_enabled             = regulator_is_enabled_regmap,
 163         .list_voltage           = regulator_list_voltage_linear,
 164         .map_voltage            = regulator_map_voltage_linear,
 165         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 166         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 167         .set_active_discharge   = regulator_set_active_discharge_regmap,
 168         .set_soft_start         = regulator_set_soft_start_regmap,
 169         .set_ramp_delay         = mpq7920_set_ramp_delay,
 170 };
 171
 172 static struct regulator_desc mpq7920_regulators_desc[MPQ7920_MAX_REGULATORS] = {
 173         MPQ7920BUCK("buck1", 1, mpq7920_I_limits1),
 174         MPQ7920BUCK("buck2", 2, mpq7920_I_limits2),
 175         MPQ7920BUCK("buck3", 3, mpq7920_I_limits1),
 176         MPQ7920BUCK("buck4", 4, mpq7920_I_limits2),
 177         MPQ7920LDO("ldortc", 1, &mpq7920_ldortc_ops, NULL, 0, 0, 0),
 178         MPQ7920LDO("ldo2", 2, &mpq7920_ldo_wo_current_ops, NULL, 0, 0, 0),
 179         MPQ7920LDO("ldo3", 3, &mpq7920_ldo_wo_current_ops, NULL, 0, 0, 0),
 180         MPQ7920LDO("ldo4", 4, &mpq7920_ldo_ops, mpq7920_I_limits3,
 181                         ARRAY_SIZE(mpq7920_I_limits3), MPQ7920_LDO4_REG_B,
 182                         MPQ7920_MASK_LDO_ILIM),
 183         MPQ7920LDO("ldo5", 5, &mpq7920_ldo_ops, mpq7920_I_limits3,
 184                         ARRAY_SIZE(mpq7920_I_limits3), MPQ7920_LDO5_REG_B,
 185                         MPQ7920_MASK_LDO_ILIM),
 186 };
 187
 188 /*
 189  * DVS ramp rate BUCK1 to BUCK4
 190  * 00-01: Reserved
 191  * 10: 8mV/us
 192  * 11: 4mV/us
 193  */
 194 static int mpq7920_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 195 {
 196         unsigned int ramp_val;
 197
 198         if (ramp_delay > 8000 || ramp_delay < 0)
 199                 return -EINVAL;
 200
 201         if (ramp_delay <= 4000)
 202                 ramp_val = 3;
 203         else
 204                 ramp_val = 2;
 205
 206         return regmap_update_bits(rdev->regmap, MPQ7920_REG_CTL0,
 207                                   MPQ7920_MASK_DVS_SLEWRATE, ramp_val << 6);
 208 }
 209
 210 static int mpq7920_parse_cb(struct device_node *np,
 211                                 const struct regulator_desc *desc,
 212                                 struct regulator_config *config)
 213 {
 214         uint8_t val;
 215         int ret;
 216         struct mpq7920_regulator_info *info = config->driver_data;
 217         struct regulator_desc *rdesc = &info->rdesc[desc->id];
 218
 219         if (of_property_read_bool(np, "mps,buck-ovp-disable")) {
 220                 regmap_update_bits(config->regmap,
 221                                 MPQ7920_BUCK1_REG_B + (rdesc->id * 4),
 222                                 MPQ7920_MASK_OVP, MPQ7920_OVP_DISABLE);
 223         }
 224
 225         ret = of_property_read_u8(np, "mps,buck-phase-delay", &val);
 226         if (!ret) {
 227                 regmap_update_bits(config->regmap,
 228                                 MPQ7920_BUCK1_REG_C + (rdesc->id * 4),
 229                                 MPQ7920_MASK_BUCK_PHASE_DEALY,
 230                                 (val & 3) << 4);
 231         }
 232
 233         ret = of_property_read_u8(np, "mps,buck-softstart", &val);
 234         if (!ret)
 235                 rdesc->soft_start_val_on = (val & 3) << 2;
 236
 237         return 0;
 238 }
 239
 240 static void mpq7920_parse_dt(struct device *dev,
 241                  struct mpq7920_regulator_info *info)
 242 {
 243         int ret;
 244         struct device_node *np = dev->of_node;
 245         uint8_t freq;
 246
 247         np = of_get_child_by_name(np, "regulators");
 248         if (!np) {
 249                 dev_err(dev, "missing 'regulators' subnode in DT\n");
 250                 return;
 251         }
 252
 253         ret = of_property_read_u8(np, "mps,switch-freq", &freq);
 254         if (!ret) {
 255                 regmap_update_bits(info->regmap, MPQ7920_REG_CTL0,
 256                                         MPQ7920_MASK_SWITCH_FREQ,
 257                                         (freq & 3) << 4);
 258         }
 259
 260         of_node_put(np);
 261 }
 262
 263 static int mpq7920_i2c_probe(struct i2c_client *client)
 264 {
 265         struct device *dev = &client->dev;
 266         struct mpq7920_regulator_info *info;
 267         struct regulator_config config = { NULL, };
 268         struct regulator_dev *rdev;
 269         struct regmap *regmap;
 270         int i;
 271
 272         info = devm_kzalloc(dev, sizeof(struct mpq7920_regulator_info),
 273                                 GFP_KERNEL);
 274         if (!info)
 275                 return -ENOMEM;
 276
 277         info->rdesc = mpq7920_regulators_desc;
 278         regmap = devm_regmap_init_i2c(client, &mpq7920_regmap_config);
 279         if (IS_ERR(regmap)) {
 280                 dev_err(dev, "Failed to allocate regmap!\n");
 281                 return PTR_ERR(regmap);
 282         }
 283
 284         i2c_set_clientdata(client, info);
 285         info->regmap = regmap;
 286         if (client->dev.of_node)
 287                 mpq7920_parse_dt(&client->dev, info);
 288
 289         config.dev = dev;
 290         config.regmap = regmap;
 291         config.driver_data = info;
 292
 293         for (i = 0; i < MPQ7920_MAX_REGULATORS; i++) {
 294                 rdev = devm_regulator_register(dev,
 295                                                &mpq7920_regulators_desc[i],
 296                                                &config);
 297                 if (IS_ERR(rdev)) {
 298                         dev_err(dev, "Failed to register regulator!\n");
 299                         return PTR_ERR(rdev);
 300                 }
 301         }
 302
 303         return 0;
 304 }
 305
 306 static const struct of_device_id mpq7920_of_match[] = {
 307         { .compatible = "mps,mpq7920"},
 308         {},
 309 };
 310 MODULE_DEVICE_TABLE(of, mpq7920_of_match);
 311
 312 static const struct i2c_device_id mpq7920_id[] = {
 313         { "mpq7920", },
 314         { },
 315 };
 316 MODULE_DEVICE_TABLE(i2c, mpq7920_id);
 317
 318 static struct i2c_driver mpq7920_regulator_driver = {
 319         .driver = {
 320                 .name = "mpq7920",
 321                 .of_match_table = of_match_ptr(mpq7920_of_match),
 322         },
 323         .probe_new = mpq7920_i2c_probe,
 324         .id_table = mpq7920_id,
 325 };
 326 module_i2c_driver(mpq7920_regulator_driver);
 327
 328 MODULE_AUTHOR("Saravanan Sekar <sravanhome@gmail.com>");
 329 MODULE_DESCRIPTION("MPQ7920 PMIC regulator driver");
 330 MODULE_LICENSE("GPL");