drivers/regulator/lp8788-ldo.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * TI LP8788 MFD - ldo regulator driver
   4  *
   5  * Copyright 2012 Texas Instruments
   6  *
   7  * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
   8  */
   9
  10 #include <linux/module.h>
  11 #include <linux/slab.h>
  12 #include <linux/err.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/regulator/driver.h>
  15 #include <linux/gpio/consumer.h>
  16 #include <linux/mfd/lp8788.h>
  17
  18 /* register address */
  19 #define LP8788_EN_LDO_A                 0x0D    /* DLDO 1 ~ 8 */
  20 #define LP8788_EN_LDO_B                 0x0E    /* DLDO 9 ~ 12, ALDO 1 ~ 4 */
  21 #define LP8788_EN_LDO_C                 0x0F    /* ALDO 5 ~ 10 */
  22 #define LP8788_EN_SEL                   0x10
  23 #define LP8788_DLDO1_VOUT               0x2E
  24 #define LP8788_DLDO2_VOUT               0x2F
  25 #define LP8788_DLDO3_VOUT               0x30
  26 #define LP8788_DLDO4_VOUT               0x31
  27 #define LP8788_DLDO5_VOUT               0x32
  28 #define LP8788_DLDO6_VOUT               0x33
  29 #define LP8788_DLDO7_VOUT               0x34
  30 #define LP8788_DLDO8_VOUT               0x35
  31 #define LP8788_DLDO9_VOUT               0x36
  32 #define LP8788_DLDO10_VOUT              0x37
  33 #define LP8788_DLDO11_VOUT              0x38
  34 #define LP8788_DLDO12_VOUT              0x39
  35 #define LP8788_ALDO1_VOUT               0x3A
  36 #define LP8788_ALDO2_VOUT               0x3B
  37 #define LP8788_ALDO3_VOUT               0x3C
  38 #define LP8788_ALDO4_VOUT               0x3D
  39 #define LP8788_ALDO5_VOUT               0x3E
  40 #define LP8788_ALDO6_VOUT               0x3F
  41 #define LP8788_ALDO7_VOUT               0x40
  42 #define LP8788_ALDO8_VOUT               0x41
  43 #define LP8788_ALDO9_VOUT               0x42
  44 #define LP8788_ALDO10_VOUT              0x43
  45 #define LP8788_DLDO1_TIMESTEP           0x44
  46
  47 /* mask/shift bits */
  48 #define LP8788_EN_DLDO1_M               BIT(0)  /* Addr 0Dh ~ 0Fh */
  49 #define LP8788_EN_DLDO2_M               BIT(1)
  50 #define LP8788_EN_DLDO3_M               BIT(2)
  51 #define LP8788_EN_DLDO4_M               BIT(3)
  52 #define LP8788_EN_DLDO5_M               BIT(4)
  53 #define LP8788_EN_DLDO6_M               BIT(5)
  54 #define LP8788_EN_DLDO7_M               BIT(6)
  55 #define LP8788_EN_DLDO8_M               BIT(7)
  56 #define LP8788_EN_DLDO9_M               BIT(0)
  57 #define LP8788_EN_DLDO10_M              BIT(1)
  58 #define LP8788_EN_DLDO11_M              BIT(2)
  59 #define LP8788_EN_DLDO12_M              BIT(3)
  60 #define LP8788_EN_ALDO1_M               BIT(4)
  61 #define LP8788_EN_ALDO2_M               BIT(5)
  62 #define LP8788_EN_ALDO3_M               BIT(6)
  63 #define LP8788_EN_ALDO4_M               BIT(7)
  64 #define LP8788_EN_ALDO5_M               BIT(0)
  65 #define LP8788_EN_ALDO6_M               BIT(1)
  66 #define LP8788_EN_ALDO7_M               BIT(2)
  67 #define LP8788_EN_ALDO8_M               BIT(3)
  68 #define LP8788_EN_ALDO9_M               BIT(4)
  69 #define LP8788_EN_ALDO10_M              BIT(5)
  70 #define LP8788_EN_SEL_DLDO911_M         BIT(0)  /* Addr 10h */
  71 #define LP8788_EN_SEL_DLDO7_M           BIT(1)
  72 #define LP8788_EN_SEL_ALDO7_M           BIT(2)
  73 #define LP8788_EN_SEL_ALDO5_M           BIT(3)
  74 #define LP8788_EN_SEL_ALDO234_M         BIT(4)
  75 #define LP8788_EN_SEL_ALDO1_M           BIT(5)
  76 #define LP8788_VOUT_5BIT_M              0x1F    /* Addr 2Eh ~ 43h */
  77 #define LP8788_VOUT_4BIT_M              0x0F
  78 #define LP8788_VOUT_3BIT_M              0x07
  79 #define LP8788_VOUT_1BIT_M              0x01
  80 #define LP8788_STARTUP_TIME_M           0xF8    /* Addr 44h ~ 59h */
  81 #define LP8788_STARTUP_TIME_S           3
  82
  83 #define ENABLE_TIME_USEC                32
  84
  85 enum lp8788_ldo_id {
  86         DLDO1,
  87         DLDO2,
  88         DLDO3,
  89         DLDO4,
  90         DLDO5,
  91         DLDO6,
  92         DLDO7,
  93         DLDO8,
  94         DLDO9,
  95         DLDO10,
  96         DLDO11,
  97         DLDO12,
  98         ALDO1,
  99         ALDO2,
 100         ALDO3,
 101         ALDO4,
 102         ALDO5,
 103         ALDO6,
 104         ALDO7,
 105         ALDO8,
 106         ALDO9,
 107         ALDO10,
 108 };
 109
 110 struct lp8788_ldo {
 111         struct lp8788 *lp;
 112         struct regulator_desc *desc;
 113         struct regulator_dev *regulator;
 114         struct gpio_desc *ena_gpiod;
 115 };
 116
 117 /* DLDO 1, 2, 3, 9 voltage table */
 118 static const int lp8788_dldo1239_vtbl[] = {
 119         1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
 120         2600000, 2700000, 2800000, 2900000, 3000000, 2850000, 2850000, 2850000,
 121         2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000,
 122         2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000,
 123 };
 124
 125 /* DLDO 4 voltage table */
 126 static const int lp8788_dldo4_vtbl[] = { 1800000, 3000000 };
 127
 128 /* DLDO 5, 7, 8 and ALDO 6 voltage table */
 129 static const int lp8788_dldo578_aldo6_vtbl[] = {
 130         1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
 131         2600000, 2700000, 2800000, 2900000, 3000000, 3000000, 3000000, 3000000,
 132 };
 133
 134 /* DLDO 6 voltage table */
 135 static const int lp8788_dldo6_vtbl[] = {
 136         3000000, 3100000, 3200000, 3300000, 3400000, 3500000, 3600000, 3600000,
 137 };
 138
 139 /* DLDO 10, 11 voltage table */
 140 static const int lp8788_dldo1011_vtbl[] = {
 141         1100000, 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000,
 142         1500000, 1500000, 1500000, 1500000, 1500000, 1500000, 1500000, 1500000,
 143 };
 144
 145 /* ALDO 1 voltage table */
 146 static const int lp8788_aldo1_vtbl[] = { 1800000, 2850000 };
 147
 148 /* ALDO 7 voltage table */
 149 static const int lp8788_aldo7_vtbl[] = {
 150         1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1800000,
 151 };
 152
 153 static int lp8788_ldo_enable_time(struct regulator_dev *rdev)
 154 {
 155         struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
 156         enum lp8788_ldo_id id = rdev_get_id(rdev);
 157         u8 val, addr = LP8788_DLDO1_TIMESTEP + id;
 158
 159         if (lp8788_read_byte(ldo->lp, addr, &val))
 160                 return -EINVAL;
 161
 162         val = (val & LP8788_STARTUP_TIME_M) >> LP8788_STARTUP_TIME_S;
 163
 164         return ENABLE_TIME_USEC * val;
 165 }
 166
 167 static const struct regulator_ops lp8788_ldo_voltage_table_ops = {
 168         .list_voltage = regulator_list_voltage_table,
 169         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 170         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 171         .enable = regulator_enable_regmap,
 172         .disable = regulator_disable_regmap,
 173         .is_enabled = regulator_is_enabled_regmap,
 174         .enable_time = lp8788_ldo_enable_time,
 175 };
 176
 177 static const struct regulator_ops lp8788_ldo_voltage_fixed_ops = {
 178         .list_voltage = regulator_list_voltage_linear,
 179         .enable = regulator_enable_regmap,
 180         .disable = regulator_disable_regmap,
 181         .is_enabled = regulator_is_enabled_regmap,
 182         .enable_time = lp8788_ldo_enable_time,
 183 };
 184
 185 static const struct regulator_desc lp8788_dldo_desc[] = {
 186         {
 187                 .name = "dldo1",
 188                 .id = DLDO1,
 189                 .ops = &lp8788_ldo_voltage_table_ops,
 190                 .n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
 191                 .volt_table = lp8788_dldo1239_vtbl,
 192                 .type = REGULATOR_VOLTAGE,
 193                 .owner = THIS_MODULE,
 194                 .vsel_reg = LP8788_DLDO1_VOUT,
 195                 .vsel_mask = LP8788_VOUT_5BIT_M,
 196                 .enable_reg = LP8788_EN_LDO_A,
 197                 .enable_mask = LP8788_EN_DLDO1_M,
 198         },
 199         {
 200                 .name = "dldo2",
 201                 .id = DLDO2,
 202                 .ops = &lp8788_ldo_voltage_table_ops,
 203                 .n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
 204                 .volt_table = lp8788_dldo1239_vtbl,
 205                 .type = REGULATOR_VOLTAGE,
 206                 .owner = THIS_MODULE,
 207                 .vsel_reg = LP8788_DLDO2_VOUT,
 208                 .vsel_mask = LP8788_VOUT_5BIT_M,
 209                 .enable_reg = LP8788_EN_LDO_A,
 210                 .enable_mask = LP8788_EN_DLDO2_M,
 211         },
 212         {
 213                 .name = "dldo3",
 214                 .id = DLDO3,
 215                 .ops = &lp8788_ldo_voltage_table_ops,
 216                 .n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
 217                 .volt_table = lp8788_dldo1239_vtbl,
 218                 .type = REGULATOR_VOLTAGE,
 219                 .owner = THIS_MODULE,
 220                 .vsel_reg = LP8788_DLDO3_VOUT,
 221                 .vsel_mask = LP8788_VOUT_5BIT_M,
 222                 .enable_reg = LP8788_EN_LDO_A,
 223                 .enable_mask = LP8788_EN_DLDO3_M,
 224         },
 225         {
 226                 .name = "dldo4",
 227                 .id = DLDO4,
 228                 .ops = &lp8788_ldo_voltage_table_ops,
 229                 .n_voltages = ARRAY_SIZE(lp8788_dldo4_vtbl),
 230                 .volt_table = lp8788_dldo4_vtbl,
 231                 .type = REGULATOR_VOLTAGE,
 232                 .owner = THIS_MODULE,
 233                 .vsel_reg = LP8788_DLDO4_VOUT,
 234                 .vsel_mask = LP8788_VOUT_1BIT_M,
 235                 .enable_reg = LP8788_EN_LDO_A,
 236                 .enable_mask = LP8788_EN_DLDO4_M,
 237         },
 238         {
 239                 .name = "dldo5",
 240                 .id = DLDO5,
 241                 .ops = &lp8788_ldo_voltage_table_ops,
 242                 .n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
 243                 .volt_table = lp8788_dldo578_aldo6_vtbl,
 244                 .type = REGULATOR_VOLTAGE,
 245                 .owner = THIS_MODULE,
 246                 .vsel_reg = LP8788_DLDO5_VOUT,
 247                 .vsel_mask = LP8788_VOUT_4BIT_M,
 248                 .enable_reg = LP8788_EN_LDO_A,
 249                 .enable_mask = LP8788_EN_DLDO5_M,
 250         },
 251         {
 252                 .name = "dldo6",
 253                 .id = DLDO6,
 254                 .ops = &lp8788_ldo_voltage_table_ops,
 255                 .n_voltages = ARRAY_SIZE(lp8788_dldo6_vtbl),
 256                 .volt_table = lp8788_dldo6_vtbl,
 257                 .type = REGULATOR_VOLTAGE,
 258                 .owner = THIS_MODULE,
 259                 .vsel_reg = LP8788_DLDO6_VOUT,
 260                 .vsel_mask = LP8788_VOUT_3BIT_M,
 261                 .enable_reg = LP8788_EN_LDO_A,
 262                 .enable_mask = LP8788_EN_DLDO6_M,
 263         },
 264         {
 265                 .name = "dldo7",
 266                 .id = DLDO7,
 267                 .ops = &lp8788_ldo_voltage_table_ops,
 268                 .n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
 269                 .volt_table = lp8788_dldo578_aldo6_vtbl,
 270                 .type = REGULATOR_VOLTAGE,
 271                 .owner = THIS_MODULE,
 272                 .vsel_reg = LP8788_DLDO7_VOUT,
 273                 .vsel_mask = LP8788_VOUT_4BIT_M,
 274                 .enable_reg = LP8788_EN_LDO_A,
 275                 .enable_mask = LP8788_EN_DLDO7_M,
 276         },
 277         {
 278                 .name = "dldo8",
 279                 .id = DLDO8,
 280                 .ops = &lp8788_ldo_voltage_table_ops,
 281                 .n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
 282                 .volt_table = lp8788_dldo578_aldo6_vtbl,
 283                 .type = REGULATOR_VOLTAGE,
 284                 .owner = THIS_MODULE,
 285                 .vsel_reg = LP8788_DLDO8_VOUT,
 286                 .vsel_mask = LP8788_VOUT_4BIT_M,
 287                 .enable_reg = LP8788_EN_LDO_A,
 288                 .enable_mask = LP8788_EN_DLDO8_M,
 289         },
 290         {
 291                 .name = "dldo9",
 292                 .id = DLDO9,
 293                 .ops = &lp8788_ldo_voltage_table_ops,
 294                 .n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
 295                 .volt_table = lp8788_dldo1239_vtbl,
 296                 .type = REGULATOR_VOLTAGE,
 297                 .owner = THIS_MODULE,
 298                 .vsel_reg = LP8788_DLDO9_VOUT,
 299                 .vsel_mask = LP8788_VOUT_5BIT_M,
 300                 .enable_reg = LP8788_EN_LDO_B,
 301                 .enable_mask = LP8788_EN_DLDO9_M,
 302         },
 303         {
 304                 .name = "dldo10",
 305                 .id = DLDO10,
 306                 .ops = &lp8788_ldo_voltage_table_ops,
 307                 .n_voltages = ARRAY_SIZE(lp8788_dldo1011_vtbl),
 308                 .volt_table = lp8788_dldo1011_vtbl,
 309                 .type = REGULATOR_VOLTAGE,
 310                 .owner = THIS_MODULE,
 311                 .vsel_reg = LP8788_DLDO10_VOUT,
 312                 .vsel_mask = LP8788_VOUT_4BIT_M,
 313                 .enable_reg = LP8788_EN_LDO_B,
 314                 .enable_mask = LP8788_EN_DLDO10_M,
 315         },
 316         {
 317                 .name = "dldo11",
 318                 .id = DLDO11,
 319                 .ops = &lp8788_ldo_voltage_table_ops,
 320                 .n_voltages = ARRAY_SIZE(lp8788_dldo1011_vtbl),
 321                 .volt_table = lp8788_dldo1011_vtbl,
 322                 .type = REGULATOR_VOLTAGE,
 323                 .owner = THIS_MODULE,
 324                 .vsel_reg = LP8788_DLDO11_VOUT,
 325                 .vsel_mask = LP8788_VOUT_4BIT_M,
 326                 .enable_reg = LP8788_EN_LDO_B,
 327                 .enable_mask = LP8788_EN_DLDO11_M,
 328         },
 329         {
 330                 .name = "dldo12",
 331                 .id = DLDO12,
 332                 .ops = &lp8788_ldo_voltage_fixed_ops,
 333                 .n_voltages = 1,
 334                 .type = REGULATOR_VOLTAGE,
 335                 .owner = THIS_MODULE,
 336                 .enable_reg = LP8788_EN_LDO_B,
 337                 .enable_mask = LP8788_EN_DLDO12_M,
 338                 .min_uV = 2500000,
 339         },
 340 };
 341
 342 static const struct regulator_desc lp8788_aldo_desc[] = {
 343         {
 344                 .name = "aldo1",
 345                 .id = ALDO1,
 346                 .ops = &lp8788_ldo_voltage_table_ops,
 347                 .n_voltages = ARRAY_SIZE(lp8788_aldo1_vtbl),
 348                 .volt_table = lp8788_aldo1_vtbl,
 349                 .type = REGULATOR_VOLTAGE,
 350                 .owner = THIS_MODULE,
 351                 .vsel_reg = LP8788_ALDO1_VOUT,
 352                 .vsel_mask = LP8788_VOUT_1BIT_M,
 353                 .enable_reg = LP8788_EN_LDO_B,
 354                 .enable_mask = LP8788_EN_ALDO1_M,
 355         },
 356         {
 357                 .name = "aldo2",
 358                 .id = ALDO2,
 359                 .ops = &lp8788_ldo_voltage_fixed_ops,
 360                 .n_voltages = 1,
 361                 .type = REGULATOR_VOLTAGE,
 362                 .owner = THIS_MODULE,
 363                 .enable_reg = LP8788_EN_LDO_B,
 364                 .enable_mask = LP8788_EN_ALDO2_M,
 365                 .min_uV = 2850000,
 366         },
 367         {
 368                 .name = "aldo3",
 369                 .id = ALDO3,
 370                 .ops = &lp8788_ldo_voltage_fixed_ops,
 371                 .n_voltages = 1,
 372                 .type = REGULATOR_VOLTAGE,
 373                 .owner = THIS_MODULE,
 374                 .enable_reg = LP8788_EN_LDO_B,
 375                 .enable_mask = LP8788_EN_ALDO3_M,
 376                 .min_uV = 2850000,
 377         },
 378         {
 379                 .name = "aldo4",
 380                 .id = ALDO4,
 381                 .ops = &lp8788_ldo_voltage_fixed_ops,
 382                 .n_voltages = 1,
 383                 .type = REGULATOR_VOLTAGE,
 384                 .owner = THIS_MODULE,
 385                 .enable_reg = LP8788_EN_LDO_B,
 386                 .enable_mask = LP8788_EN_ALDO4_M,
 387                 .min_uV = 2850000,
 388         },
 389         {
 390                 .name = "aldo5",
 391                 .id = ALDO5,
 392                 .ops = &lp8788_ldo_voltage_fixed_ops,
 393                 .n_voltages = 1,
 394                 .type = REGULATOR_VOLTAGE,
 395                 .owner = THIS_MODULE,
 396                 .enable_reg = LP8788_EN_LDO_C,
 397                 .enable_mask = LP8788_EN_ALDO5_M,
 398                 .min_uV = 2850000,
 399         },
 400         {
 401                 .name = "aldo6",
 402                 .id = ALDO6,
 403                 .ops = &lp8788_ldo_voltage_table_ops,
 404                 .n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
 405                 .volt_table = lp8788_dldo578_aldo6_vtbl,
 406                 .type = REGULATOR_VOLTAGE,
 407                 .owner = THIS_MODULE,
 408                 .vsel_reg = LP8788_ALDO6_VOUT,
 409                 .vsel_mask = LP8788_VOUT_4BIT_M,
 410                 .enable_reg = LP8788_EN_LDO_C,
 411                 .enable_mask = LP8788_EN_ALDO6_M,
 412         },
 413         {
 414                 .name = "aldo7",
 415                 .id = ALDO7,
 416                 .ops = &lp8788_ldo_voltage_table_ops,
 417                 .n_voltages = ARRAY_SIZE(lp8788_aldo7_vtbl),
 418                 .volt_table = lp8788_aldo7_vtbl,
 419                 .type = REGULATOR_VOLTAGE,
 420                 .owner = THIS_MODULE,
 421                 .vsel_reg = LP8788_ALDO7_VOUT,
 422                 .vsel_mask = LP8788_VOUT_3BIT_M,
 423                 .enable_reg = LP8788_EN_LDO_C,
 424                 .enable_mask = LP8788_EN_ALDO7_M,
 425         },
 426         {
 427                 .name = "aldo8",
 428                 .id = ALDO8,
 429                 .ops = &lp8788_ldo_voltage_fixed_ops,
 430                 .n_voltages = 1,
 431                 .type = REGULATOR_VOLTAGE,
 432                 .owner = THIS_MODULE,
 433                 .enable_reg = LP8788_EN_LDO_C,
 434                 .enable_mask = LP8788_EN_ALDO8_M,
 435                 .min_uV = 2500000,
 436         },
 437         {
 438                 .name = "aldo9",
 439                 .id = ALDO9,
 440                 .ops = &lp8788_ldo_voltage_fixed_ops,
 441                 .n_voltages = 1,
 442                 .type = REGULATOR_VOLTAGE,
 443                 .owner = THIS_MODULE,
 444                 .enable_reg = LP8788_EN_LDO_C,
 445                 .enable_mask = LP8788_EN_ALDO9_M,
 446                 .min_uV = 2500000,
 447         },
 448         {
 449                 .name = "aldo10",
 450                 .id = ALDO10,
 451                 .ops = &lp8788_ldo_voltage_fixed_ops,
 452                 .n_voltages = 1,
 453                 .type = REGULATOR_VOLTAGE,
 454                 .owner = THIS_MODULE,
 455                 .enable_reg = LP8788_EN_LDO_C,
 456                 .enable_mask = LP8788_EN_ALDO10_M,
 457                 .min_uV = 1100000,
 458         },
 459 };
 460
 461 static int lp8788_config_ldo_enable_mode(struct platform_device *pdev,
 462                                         struct lp8788_ldo *ldo,
 463                                         enum lp8788_ldo_id id)
 464 {
 465         struct lp8788 *lp = ldo->lp;
 466         enum lp8788_ext_ldo_en_id enable_id;
 467         static const u8 en_mask[] = {
 468                 [EN_ALDO1]   = LP8788_EN_SEL_ALDO1_M,
 469                 [EN_ALDO234] = LP8788_EN_SEL_ALDO234_M,
 470                 [EN_ALDO5]   = LP8788_EN_SEL_ALDO5_M,
 471                 [EN_ALDO7]   = LP8788_EN_SEL_ALDO7_M,
 472                 [EN_DLDO7]   = LP8788_EN_SEL_DLDO7_M,
 473                 [EN_DLDO911] = LP8788_EN_SEL_DLDO911_M,
 474         };
 475
 476         switch (id) {
 477         case DLDO7:
 478                 enable_id = EN_DLDO7;
 479                 break;
 480         case DLDO9:
 481         case DLDO11:
 482                 enable_id = EN_DLDO911;
 483                 break;
 484         case ALDO1:
 485                 enable_id = EN_ALDO1;
 486                 break;
 487         case ALDO2 ... ALDO4:
 488                 enable_id = EN_ALDO234;
 489                 break;
 490         case ALDO5:
 491                 enable_id = EN_ALDO5;
 492                 break;
 493         case ALDO7:
 494                 enable_id = EN_ALDO7;
 495                 break;
 496         default:
 497                 return 0;
 498         }
 499
 500         /*
 501          * Do not use devm* here: the regulator core takes over the
 502          * lifecycle management of the GPIO descriptor.
 503          * FIXME: check default mode for GPIO here: high or low?
 504          */
 505         ldo->ena_gpiod = gpiod_get_index_optional(&pdev->dev,
 506                                                "enable",
 507                                                enable_id,
 508                                                GPIOD_OUT_HIGH |
 509                                                GPIOD_FLAGS_BIT_NONEXCLUSIVE);
 510         if (IS_ERR(ldo->ena_gpiod))
 511                 return PTR_ERR(ldo->ena_gpiod);
 512
 513         /* if no GPIO for ldo pin, then set default enable mode */
 514         if (!ldo->ena_gpiod)
 515                 goto set_default_ldo_enable_mode;
 516
 517         return 0;
 518
 519 set_default_ldo_enable_mode:
 520         return lp8788_update_bits(lp, LP8788_EN_SEL, en_mask[enable_id], 0);
 521 }
 522
 523 static int lp8788_dldo_probe(struct platform_device *pdev)
 524 {
 525         struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
 526         int id = pdev->id;
 527         struct lp8788_ldo *ldo;
 528         struct regulator_config cfg = { };
 529         struct regulator_dev *rdev;
 530         int ret;
 531
 532         ldo = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
 533         if (!ldo)
 534                 return -ENOMEM;
 535
 536         ldo->lp = lp;
 537         ret = lp8788_config_ldo_enable_mode(pdev, ldo, id);
 538         if (ret)
 539                 return ret;
 540
 541         if (ldo->ena_gpiod)
 542                 cfg.ena_gpiod = ldo->ena_gpiod;
 543
 544         cfg.dev = pdev->dev.parent;
 545         cfg.init_data = lp->pdata ? lp->pdata->dldo_data[id] : NULL;
 546         cfg.driver_data = ldo;
 547         cfg.regmap = lp->regmap;
 548
 549         rdev = devm_regulator_register(&pdev->dev, &lp8788_dldo_desc[id], &cfg);
 550         if (IS_ERR(rdev)) {
 551                 ret = PTR_ERR(rdev);
 552                 dev_err(&pdev->dev, "DLDO%d regulator register err = %d\n",
 553                                 id + 1, ret);
 554                 return ret;
 555         }
 556
 557         ldo->regulator = rdev;
 558         platform_set_drvdata(pdev, ldo);
 559
 560         return 0;
 561 }
 562
 563 static struct platform_driver lp8788_dldo_driver = {
 564         .probe = lp8788_dldo_probe,
 565         .driver = {
 566                 .name = LP8788_DEV_DLDO,
 567         },
 568 };
 569
 570 static int lp8788_aldo_probe(struct platform_device *pdev)
 571 {
 572         struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
 573         int id = pdev->id;
 574         struct lp8788_ldo *ldo;
 575         struct regulator_config cfg = { };
 576         struct regulator_dev *rdev;
 577         int ret;
 578
 579         ldo = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
 580         if (!ldo)
 581                 return -ENOMEM;
 582
 583         ldo->lp = lp;
 584         ret = lp8788_config_ldo_enable_mode(pdev, ldo, id + ALDO1);
 585         if (ret)
 586                 return ret;
 587
 588         if (ldo->ena_gpiod)
 589                 cfg.ena_gpiod = ldo->ena_gpiod;
 590
 591         cfg.dev = pdev->dev.parent;
 592         cfg.init_data = lp->pdata ? lp->pdata->aldo_data[id] : NULL;
 593         cfg.driver_data = ldo;
 594         cfg.regmap = lp->regmap;
 595
 596         rdev = devm_regulator_register(&pdev->dev, &lp8788_aldo_desc[id], &cfg);
 597         if (IS_ERR(rdev)) {
 598                 ret = PTR_ERR(rdev);
 599                 dev_err(&pdev->dev, "ALDO%d regulator register err = %d\n",
 600                                 id + 1, ret);
 601                 return ret;
 602         }
 603
 604         ldo->regulator = rdev;
 605         platform_set_drvdata(pdev, ldo);
 606
 607         return 0;
 608 }
 609
 610 static struct platform_driver lp8788_aldo_driver = {
 611         .probe = lp8788_aldo_probe,
 612         .driver = {
 613                 .name = LP8788_DEV_ALDO,
 614         },
 615 };
 616
 617 static struct platform_driver * const drivers[] = {
 618         &lp8788_dldo_driver,
 619         &lp8788_aldo_driver,
 620 };
 621
 622 static int __init lp8788_ldo_init(void)
 623 {
 624         return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
 625 }
 626 subsys_initcall(lp8788_ldo_init);
 627
 628 static void __exit lp8788_ldo_exit(void)
 629 {
 630         platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
 631 }
 632 module_exit(lp8788_ldo_exit);
 633
 634 MODULE_DESCRIPTION("TI LP8788 LDO Driver");
 635 MODULE_AUTHOR("Milo Kim");
 636 MODULE_LICENSE("GPL");
 637 MODULE_ALIAS("platform:lp8788-dldo");
 638 MODULE_ALIAS("platform:lp8788-aldo");